path: root/bsp/lpc408x/Libraries/Drivers/source/lpc_gpio.c

/**********************************************************************
* $Id$      lpc_gpio.c          2011-06-02
*//**
* @file     lpc_gpio.c
* @brief    Contains all functions support for GPIO firmware library
*           on LPC
* @version  1.0
* @date     02. June. 2011
* @author   NXP MCU SW Application Team
* 
* Copyright(C) 2011, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors'
* relevant copyright in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers.  This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
**********************************************************************/

/* Peripheral group ----------------------------------------------------------- */
/** @addtogroup GPIO
 * @{
 */
#ifdef __BUILD_WITH_EXAMPLE__
#include "lpc_libcfg.h"
#else
#include "lpc_libcfg_default.h"
#endif /* __BUILD_WITH_EXAMPLE__ */
#ifdef _GPIO

/* Includes ------------------------------------------------------------------- */
#include "lpc_gpio.h"
#include "lpc_clkpwr.h"

/* definitions ------------------------------------------------------------------- */
#define  GPIO_IS_ENABLED(x)    (((x) != 0)? ENABLE:DISABLE)

/* Private Functions ---------------------------------------------------------- */

static LPC_GPIO_TypeDef *GPIO_GetPointer(uint8_t portNum);
static GPIO_HalfWord_TypeDef *FIO_HalfWordGetPointer(uint8_t portNum);
static GPIO_Byte_TypeDef *FIO_ByteGetPointer(uint8_t portNum);

/*********************************************************************//**
 * @brief       Get pointer to GPIO peripheral due to GPIO port
 * @param[in]   portNum     Port Number value, should be in range from 0 to 4.
 * @return      Pointer to GPIO peripheral
 **********************************************************************/
static LPC_GPIO_TypeDef *GPIO_GetPointer(uint8_t portNum)
{
    LPC_GPIO_TypeDef *pGPIO = NULL;

    switch (portNum)
    {
        case 0:
            pGPIO = LPC_GPIO0;
            break;

        case 1:
            pGPIO = LPC_GPIO1;
            break;

        case 2:
            pGPIO = LPC_GPIO2;
            break;

        case 3:
            pGPIO = LPC_GPIO3;
            break;

        case 4:
            pGPIO = LPC_GPIO4;
            break;

        case 5:
            pGPIO = LPC_GPIO5;
            break;

        default:
            break;
    }

    return pGPIO;
}

/*********************************************************************//**
 * @brief       Get pointer to FIO peripheral in halfword accessible style
 *              due to FIO port
 * @param[in]   portNum     Port Number value, should be in range from 0 to 4.
 * @return      Pointer to FIO peripheral
 **********************************************************************/
static GPIO_HalfWord_TypeDef *FIO_HalfWordGetPointer(uint8_t portNum)
{
    GPIO_HalfWord_TypeDef *pFIO = NULL;

    switch (portNum)
    {
        case 0:
            pFIO = GPIO0_HalfWord;
            break;

        case 1:
            pFIO = GPIO1_HalfWord;
            break;

        case 2:
            pFIO = GPIO2_HalfWord;
            break;

        case 3:
            pFIO = GPIO3_HalfWord;
            break;

        case 4:
            pFIO = GPIO4_HalfWord;
            break;

        case 5:
            pFIO = GPIO5_HalfWord;
            break;

        default:
            break;
    }

    return pFIO;
}

/*********************************************************************//**
 * @brief       Get pointer to FIO peripheral in byte accessible style
 *              due to FIO port
 * @param[in]   portNum     Port Number value, should be in range from 0 to 4.
 * @return      Pointer to FIO peripheral
 **********************************************************************/
static GPIO_Byte_TypeDef *FIO_ByteGetPointer(uint8_t portNum)
{
    GPIO_Byte_TypeDef *pFIO = NULL;

    switch (portNum)
    {
        case 0:
            pFIO = GPIO0_Byte;
            break;

        case 1:
            pFIO = GPIO1_Byte;
            break;

        case 2:
            pFIO = GPIO2_Byte;
            break;

        case 3:
            pFIO = GPIO3_Byte;
            break;

        case 4:
            pFIO = GPIO4_Byte;
            break;

        case 5:
            pFIO = GPIO5_Byte;
            break;

        default:
            break;
    }

    return pFIO;
}

/* End of Private Functions --------------------------------------------------- */


/* Public Functions ----------------------------------------------------------- */
/** @addtogroup GPIO_Public_Functions
 * @{
 */


/* GPIO ------------------------------------------------------------------------------ */

/*********************************************************************//**
 * @brief       Initialize the GPIO component by power on the clock 
 *              supplied to it.
 * @return      None
 *
 * Note: 
 **********************************************************************/
void GPIO_Init(void)
{
    CLKPWR_ConfigPPWR(CLKPWR_PCONP_PCGPIO, ENABLE);

    return;
}


/*********************************************************************//**
 * @brief       De-initialize the GPIO component by power off the clock 
 *              supplied to it.
 * @return      None
 *
 * Note: 
 **********************************************************************/
void GPIO_Deinit(void)
{
    CLKPWR_ConfigPPWR(CLKPWR_PCONP_PCGPIO, DISABLE);

    return;
}


/*********************************************************************//**
 * @brief       Set Direction for GPIO port.
 * @param[in]   portNum     Port Number value, should be in range from 0 to 4
 * @param[in]   bitValue    Value that contains all bits to set direction,
 *                          in range from 0 to 0xFFFFFFFF.
 *                          example: value 0x5 to set direction for bit 0 and bit 1.
 * @param[in]   dir         Direction value, should be:
 *                          - 0: Input.
 *                          - 1: Output.
 * @return      None
 *
 * Note: All remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void GPIO_SetDir(uint8_t portNum, uint32_t bitValue, uint8_t dir)
{
    LPC_GPIO_TypeDef *pGPIO = GPIO_GetPointer(portNum);

    if (pGPIO != NULL)
    {
        // Enable Output
        if (dir)
        {
            pGPIO->DIR |= bitValue;
        }
        // Enable Input
        else
        {
            pGPIO->DIR &= ~bitValue;
        }
    }
}


/*********************************************************************//**
 * @brief       Set Value for bits that have output direction on GPIO port.
 * @param[in]   portNum     Port number value, should be in range from 0 to 4
 * @param[in]   bitValue    Value that contains all bits on GPIO to set,
 *                          in range from 0 to 0xFFFFFFFF.
 *                          example: value 0x5 to set bit 0 and bit 1.
 * @return      None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void GPIO_SetValue(uint8_t portNum, uint32_t bitValue)
{
    LPC_GPIO_TypeDef *pGPIO = GPIO_GetPointer(portNum);

    if (pGPIO != NULL)
    {
        pGPIO->SET = bitValue;
    }
}

/*********************************************************************//**
 * @brief       Clear Value for bits that have output direction on GPIO port.
 * @param[in]   portNum     Port number value, should be in range from 0 to 4
 * @param[in]   bitValue    Value that contains all bits on GPIO to clear,
 *                          in range from 0 to 0xFFFFFFFF.
 *                          example: value 0x5 to clear bit 0 and bit 1.
 * @return      None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void GPIO_ClearValue(uint8_t portNum, uint32_t bitValue)
{
    LPC_GPIO_TypeDef *pGPIO = GPIO_GetPointer(portNum);

    if (pGPIO != NULL)
    {
        pGPIO->CLR = bitValue;
    }
}

/*********************************************************************//**
 * @brief       Output to the GPIO pin an expected value
 * @param[in]   portNum     Port number value, should be in range from 0 to 4
 * @param[in]   bitValue    Value that contains all bits on GPIO to clear,
 *                          in range from 0 to 0xFFFFFFFF.
 *                          example: value 0x5 to clear bit 0 and bit 1.
 * @return      None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void GPIO_OutputValue(uint8_t portNum, uint32_t bitMask, uint8_t value)
{
    if (value == 0)
    {
        GPIO_ClearValue(portNum, bitMask);
    }
    else
    {
        GPIO_SetValue(portNum, bitMask);
    }

}


/*********************************************************************//**
 * @brief       Read Current state on port pin that have input direction of GPIO
 * @param[in]   portNum     Port number to read value, in range from 0 to 4
 * @return      Current value of GPIO port.
 *
 * Note: Return value contain state of each port pin (bit) on that GPIO regardless
 * its direction is input or output.
 **********************************************************************/
uint32_t GPIO_ReadValue(uint8_t portNum)
{
    LPC_GPIO_TypeDef *pGPIO = GPIO_GetPointer(portNum);

    if (pGPIO != NULL)
    {
        return pGPIO->PIN;
    }

    return (0);
}

/*********************************************************************//**
 * @brief       Enable GPIO interrupt (just used for P0.0-P0.30, P2.0-P2.13)
 * @param[in]   portNum     Port number to read value, should be: 0 or 2
 * @param[in]   bitValue    Value that contains all bits on GPIO to enable,
 *                          in range from 0 to 0xFFFFFFFF.
 * @param[in]   edgeState   state of edge, should be:
 *                          - 0: Rising edge
 *                          - 1: Falling edge
 * @return      None
 **********************************************************************/
void GPIO_IntCmd(uint8_t portNum, uint32_t bitValue, uint8_t edgeState)
{
    if((portNum == 0)&&(edgeState == 0))
        LPC_GPIOINT->IO0IntEnR = bitValue;
    else if ((portNum == 2)&&(edgeState == 0))
        LPC_GPIOINT->IO2IntEnR = bitValue;
    else if ((portNum == 0)&&(edgeState == 1))
        LPC_GPIOINT->IO0IntEnF = bitValue;
    else if ((portNum == 2)&&(edgeState == 1))
        LPC_GPIOINT->IO2IntEnF = bitValue;
    else
        //Error
        while(1);
}

/*********************************************************************//**
 * @brief       Get GPIO Interrupt Status (just used for P0.0-P0.30, P2.0-P2.13)
 * @param[in]   portNum     Port number to read value, should be: 0 or 2
 * @param[in]   pinNum      Pin number, should be: 0..30(with port 0) and 0..13
 *                          (with port 2)
 * @param[in]   edgeState   state of edge, should be:
 *                          - 0: Rising edge
 *                          - 1: Falling edge
 * @return      Bool    could be:
 *                      - ENABLE: Interrupt has been generated due to a rising
 *                              edge on P0.0
 *                      - DISABLE: A rising edge has not been detected on P0.0
 **********************************************************************/
FunctionalState GPIO_GetIntStatus(uint8_t portNum, uint32_t pinNum, uint8_t edgeState)
{
    if((portNum == 0) && (edgeState == 0))//Rising Edge
        return GPIO_IS_ENABLED(((LPC_GPIOINT->IO0IntStatR)>>pinNum)& 0x1);
    else if ((portNum == 2) && (edgeState == 0))
        return GPIO_IS_ENABLED(((LPC_GPIOINT->IO2IntStatR)>>pinNum)& 0x1);
    else if ((portNum == 0) && (edgeState == 1))//Falling Edge
        return GPIO_IS_ENABLED(((LPC_GPIOINT->IO0IntStatF)>>pinNum)& 0x1);
    else if ((portNum == 2) && (edgeState == 1))
        return GPIO_IS_ENABLED(((LPC_GPIOINT->IO2IntStatF)>>pinNum)& 0x1);
    else
        //Error
        while(1);
}
/*********************************************************************//**
 * @brief       Clear GPIO interrupt (just used for P0.0-P0.30, P2.0-P2.13)
 * @param[in]   portNum     Port number to read value, should be: 0 or 2
 * @param[in]   bitValue    Value that contains all bits on GPIO to enable,
 *                          in range from 0 to 0xFFFFFFFF.
 * @return      None
 **********************************************************************/
void GPIO_ClearInt(uint8_t portNum, uint32_t bitValue)
{
    if(portNum == 0)
        LPC_GPIOINT->IO0IntClr = bitValue;
    else if (portNum == 2)
        LPC_GPIOINT->IO2IntClr = bitValue;
    else
        //Invalid portNum
        while(1);
}

/* FIO word accessible ----------------------------------------------------------------- */
/* Stub function for FIO (word-accessible) style */

/**
 * @brief The same with GPIO_SetDir()
 */
void FIO_SetDir(uint8_t portNum, uint32_t bitValue, uint8_t dir)
{
    GPIO_SetDir(portNum, bitValue, dir);
}

/**
 * @brief The same with GPIO_SetValue()
 */
void FIO_SetValue(uint8_t portNum, uint32_t bitValue)
{
    GPIO_SetValue(portNum, bitValue);
}

/**
 * @brief The same with GPIO_ClearValue()
 */
void FIO_ClearValue(uint8_t portNum, uint32_t bitValue)
{
    GPIO_ClearValue(portNum, bitValue);
}

/**
 * @brief The same with GPIO_ReadValue()
 */
uint32_t FIO_ReadValue(uint8_t portNum)
{
    return (GPIO_ReadValue(portNum));
}

/**
 * @brief The same with GPIO_IntCmd()
 */
void FIO_IntCmd(uint8_t portNum, uint32_t bitValue, uint8_t edgeState)
{
    GPIO_IntCmd(portNum, bitValue, edgeState);
}

/**
 * @brief The same with GPIO_GetIntStatus()
 */
FunctionalState FIO_GetIntStatus(uint8_t portNum, uint32_t pinNum, uint8_t edgeState)
{
    return (GPIO_GetIntStatus(portNum, pinNum, edgeState));
}

/**
 * @brief The same with GPIO_ClearInt()
 */
void FIO_ClearInt(uint8_t portNum, uint32_t bitValue)
{
    GPIO_ClearInt(portNum, bitValue);
}
/*********************************************************************//**
 * @brief       Set mask value for bits in FIO port
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   bitValue    Value that contains all bits in to set,
 *                          in range from 0 to 0xFFFFFFFF.
 * @param[in]   maskValue   Mask value contains state value for each bit:
 *                          - 0: not mask.
 *                          - 1: mask.
 * @return      None
 *
 * Note:
 * - All remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 * - After executing this function, in mask register, value '0' on each bit
 * enables an access to the corresponding physical pin via a read or write access,
 * while value '1' on bit (masked) that corresponding pin will not be changed
 * with write access and if read, will not be reflected in the updated pin.
 **********************************************************************/
void FIO_SetMask(uint8_t portNum, uint32_t bitValue, uint8_t maskValue)
{
    LPC_GPIO_TypeDef *pFIO = GPIO_GetPointer(portNum);

    if(pFIO != NULL)
    {
        // Mask
        if (maskValue)
        {
            pFIO->MASK |= bitValue;
        }
        // Un-mask
        else
        {
            pFIO->MASK &= ~bitValue;
        }
    }
}


/* FIO halfword accessible ------------------------------------------------------------- */

/*********************************************************************//**
 * @brief       Set direction for FIO port in halfword accessible style
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   halfwordNum HalfWord part number, should be 0 (lower) or 1(upper)
 * @param[in]   bitValue    Value that contains all bits in to set direction,
 *                          in range from 0 to 0xFFFF.
 * @param[in]   dir         Direction value, should be:
 *                          - 0: Input.
 *                          - 1: Output.
 * @return      None
 *
 * Note: All remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void FIO_HalfWordSetDir(uint8_t portNum, uint8_t halfwordNum, uint16_t bitValue, uint8_t dir)
{
    GPIO_HalfWord_TypeDef *pFIO = FIO_HalfWordGetPointer(portNum);

    if(pFIO != NULL)
    {
        // Output direction
        if (dir)
        {
            // Upper
            if(halfwordNum)
            {
                pFIO->FIODIRU |= bitValue;
            }
            // lower
            else
            {
                pFIO->FIODIRL |= bitValue;
            }
        }
        // Input direction
        else
        {
            // Upper
            if(halfwordNum)
            {
                pFIO->FIODIRU &= ~bitValue;
            }
            // lower
            else
            {
                pFIO->FIODIRL &= ~bitValue;
            }
        }
    }
}


/*********************************************************************//**
 * @brief       Set mask value for bits in FIO port in halfword accessible style
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   halfwordNum HalfWord part number, should be 0 (lower) or 1(upper)
 * @param[in]   bitValue    Value that contains all bits in to set,
 *                          in range from 0 to 0xFFFF.
 * @param[in]   maskValue   Mask value contains state value for each bit:
 *                  - 0: not mask.
 *                  - 1: mask.
 * @return      None
 *
 * Note:
 * - All remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 * - After executing this function, in mask register, value '0' on each bit
 * enables an access to the corresponding physical pin via a read or write access,
 * while value '1' on bit (masked) that corresponding pin will not be changed
 * with write access and if read, will not be reflected in the updated pin.
 **********************************************************************/
void FIO_HalfWordSetMask(uint8_t portNum, uint8_t halfwordNum, uint16_t bitValue, uint8_t maskValue)
{
    GPIO_HalfWord_TypeDef *pFIO = FIO_HalfWordGetPointer(portNum);

    if(pFIO != NULL)
    {
        // Mask
        if (maskValue)
        {
            // Upper
            if(halfwordNum)
            {
                pFIO->FIOMASKU |= bitValue;
            }
            // lower
            else
            {
                pFIO->FIOMASKL |= bitValue;
            }
        }
        // Un-mask
        else
        {
            // Upper
            if(halfwordNum)
            {
                pFIO->FIOMASKU &= ~bitValue;
            }
            // lower
            else
            {
                pFIO->FIOMASKL &= ~bitValue;
            }
        }
    }
}


/*********************************************************************//**
 * @brief       Set bits for FIO port in halfword accessible style
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   halfwordNum HalfWord part number, should be 0 (lower) or 1(upper)
 * @param[in]   bitValue    Value that contains all bits in to set,
 *                          in range from 0 to 0xFFFF.
 * @return      None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void FIO_HalfWordSetValue(uint8_t portNum, uint8_t halfwordNum, uint16_t bitValue)
{
    GPIO_HalfWord_TypeDef *pFIO = FIO_HalfWordGetPointer(portNum);

    if(pFIO != NULL)
    {
        // Upper
        if(halfwordNum)
        {
            pFIO->FIOSETU = bitValue;
        }
        // lower
        else
        {
            pFIO->FIOSETL = bitValue;
        }
    }
}


/*********************************************************************//**
 * @brief       Clear bits for FIO port in halfword accessible style
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   halfwordNum HalfWord part number, should be 0 (lower) or 1(upper)
 * @param[in]   bitValue    Value that contains all bits in to clear,
 *                          in range from 0 to 0xFFFF.
 * @return      None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void FIO_HalfWordClearValue(uint8_t portNum, uint8_t halfwordNum, uint16_t bitValue)
{
    GPIO_HalfWord_TypeDef *pFIO = FIO_HalfWordGetPointer(portNum);

    if(pFIO != NULL)
    {
        // Upper
        if(halfwordNum)
        {
            pFIO->FIOCLRU = bitValue;
        }
        // lower
        else
        {
            pFIO->FIOCLRL = bitValue;
        }
    }
}


/*********************************************************************//**
 * @brief       Read Current state on port pin that have input direction of GPIO
 *              in halfword accessible style.
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   halfwordNum HalfWord part number, should be 0 (lower) or 1(upper)
 * @return      Current value of FIO port pin of specified halfword.
 * Note: Return value contain state of each port pin (bit) on that FIO regardless
 * its direction is input or output.
 **********************************************************************/
uint16_t FIO_HalfWordReadValue(uint8_t portNum, uint8_t halfwordNum)
{
    GPIO_HalfWord_TypeDef *pFIO = FIO_HalfWordGetPointer(portNum);

    if(pFIO != NULL)
    {
        // Upper
        if(halfwordNum)
        {
            return (pFIO->FIOPINU);
        }
        // lower
        else
        {
            return (pFIO->FIOPINL);
        }
    }

    return (0);
}


/* FIO Byte accessible ------------------------------------------------------------ */

/*********************************************************************//**
 * @brief       Set direction for FIO port in byte accessible style
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   byteNum     Byte part number, should be in range from 0 to 3
 * @param[in]   bitValue    Value that contains all bits in to set direction,
 *                          in range from 0 to 0xFF.
 * @param[in]   dir         Direction value, should be:
 *                          - 0: Input.
 *                          - 1: Output.
 * @return      None
 *
 * Note: All remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void FIO_ByteSetDir(uint8_t portNum, uint8_t byteNum, uint8_t bitValue, uint8_t dir)
{
    GPIO_Byte_TypeDef *pFIO = FIO_ByteGetPointer(portNum);

    if(pFIO != NULL)
    {
        // Output direction
        if (dir)
        {
            if (byteNum <= 3)
            {
                pFIO->FIODIR[byteNum] |= bitValue;
            }
        }
        // Input direction
        else
        {
            if (byteNum <= 3)
            {
                pFIO->FIODIR[byteNum] &= ~bitValue;
            }
        }
    }
}

/*********************************************************************//**
 * @brief       Set mask value for bits in FIO port in byte accessible style
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   byteNum     Byte part number, should be in range from 0 to 3
 * @param[in]   bitValue    Value that contains all bits in to set mask,
 *                          in range from 0 to 0xFF.
 * @param[in]   maskValue   Mask value contains state value for each bit:
 *                          - 0: not mask.
 *                          - 1: mask.
 * @return      None
 *
 * Note:
 * - All remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 * - After executing this function, in mask register, value '0' on each bit
 * enables an access to the corresponding physical pin via a read or write access,
 * while value '1' on bit (masked) that corresponding pin will not be changed
 * with write access and if read, will not be reflected in the updated pin.
 **********************************************************************/
void FIO_ByteSetMask(uint8_t portNum, uint8_t byteNum, uint8_t bitValue, uint8_t maskValue)
{
    GPIO_Byte_TypeDef *pFIO = FIO_ByteGetPointer(portNum);

    if(pFIO != NULL)
    {
        // Mask
        if (maskValue)
        {
            if (byteNum <= 3)
            {
                pFIO->FIOMASK[byteNum] |= bitValue;
            }
        }
        // Un-mask
        else {
            if (byteNum <= 3)
            {
                pFIO->FIOMASK[byteNum] &= ~bitValue;
            }
        }
    }
}


/*********************************************************************//**
 * @brief       Set bits for FIO port in byte accessible style
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   byteNum     Byte part number, should be in range from 0 to 3
 * @param[in]   bitValue    Value that contains all bits in to set,
 *                          in range from 0 to 0xFF.
 * @return      None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void FIO_ByteSetValue(uint8_t portNum, uint8_t byteNum, uint8_t bitValue)
{
    GPIO_Byte_TypeDef *pFIO = FIO_ByteGetPointer(portNum);

    if (pFIO != NULL) {
        if (byteNum <= 3)
        {
            pFIO->FIOSET[byteNum] = bitValue;
        }
    }
}


/*********************************************************************//**
 * @brief       Clear bits for FIO port in byte accessible style
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   byteNum     Byte part number, should be in range from 0 to 3
 * @param[in]   bitValue    Value that contains all bits in to clear,
 *                          in range from 0 to 0xFF.
 * @return      None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void FIO_ByteClearValue(uint8_t portNum, uint8_t byteNum, uint8_t bitValue)
{
    GPIO_Byte_TypeDef *pFIO = FIO_ByteGetPointer(portNum);

    if (pFIO != NULL)
    {
        if (byteNum <= 3)
        {
            pFIO->FIOCLR[byteNum] = bitValue;
        }
    }
}


/*********************************************************************//**
 * @brief       Read Current state on port pin that have input direction of GPIO
 *              in byte accessible style.
 * @param[in]   portNum     Port number, in range from 0 to 4
 * @param[in]   byteNum     Byte part number, should be in range from 0 to 3
 * @return      Current value of FIO port pin of specified byte part.
 * Note: Return value contain state of each port pin (bit) on that FIO regardless
 * its direction is input or output.
 **********************************************************************/
uint8_t FIO_ByteReadValue(uint8_t portNum, uint8_t byteNum)
{
    GPIO_Byte_TypeDef *pFIO = FIO_ByteGetPointer(portNum);

    if (pFIO != NULL)
    {
        if (byteNum <= 3)
        {
            return (pFIO->FIOPIN[byteNum]);
        }
    }
    return (0);
}

/**
 * @}
 */

#endif /* _GPIO */

/**
 * @}
 */

/* --------------------------------- End Of File ------------------------------ */