blob: def9e382296fa82501c828221dbf1240e64def29 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
|
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-12-04 Jiaxun Yang Initial version
*/
#ifndef __RT_LS1C_SELFBOOT_H
#define __RT_LS1C_SELFBOOT_H
/* SDRAM PARAM macro */
#define SD_FREQ (((APB_CLK / 4) * (PLL_MULT / CPU_DIV)) / SDRAM_PARAM_DIV_NUM)
/* SDRAM ROW */
#define ROW_1K 0x7
#define ROW_2K 0x0
#define ROW_4K 0x1
#define ROW_8K 0x2
#define ROW_16K 0x3
/* SDRAM COL */
#define COL_256 0x7
#define COL_512 0x0
#define COL_1K 0x1
#define COL_2K 0x2
#define COL_4K 0x3
/* SDRAM WIDTH */
#define WIDTH_8 0x0
#define WIDTH_16 0x1
#define WIDTH_32 0x2
#define TRCD 3
#define TCL 3
#define TRP 3
#define TRFC 8
#define TRAS 6
#define TREF 0x818
#define TWR 2
#define DEF_SEL 0x1
#define DEF_SEL_N 0x0
#define HANG_UP 0x1
#define HANG_UP_N 0x0
#define CFG_VALID 0x1
#include "board.h"
#define SD_PARA0 (0x7f<<25 | \
(TRAS << 21) | \
(TRFC << 17) | (TRP << 14) | (TCL << 11) | \
(TRCD << 8) | (SDRAM_WIDTH << 6) | (SDRAM_COL << 3) | \
SDRAM_ROW)
#define SD_PARA1 ((HANG_UP_N << 8) | (DEF_SEL_N << 7) | (TWR << 5) | (TREF >> 7))
#define SD_PARA1_EN ((CFG_VALID << 9) | (HANG_UP_N << 8) | \
(DEF_SEL_N << 7) | (TWR << 5) | (TREF >> 7))
#define LS1C_CBUS_FIRST1 0xBFE011C4
#define LS1C_UART2_BASE 0xBFE48000
/* UART register offset*/
#define LS1C_UART_DAT_OFFSET (0)
#define LS1C_UART_IER_OFFSET (1)
#define LS1C_UART_IIR_OFFSET (2)
#define LS1C_UART_FCR_OFFSET (2)
#define LS1C_UART_LCR_OFFSET (3)
#define LS1C_UART_MCR_OFFSET (4)
#define LS1C_UART_LSR_OFFSET (5)
#define LS1C_UART_MSR_OFFSET (6)
#define LS1C_UART_LSB_OFFSET (0)
#define LS1C_UART_MSB_OFFSET (1)
/* interrupt enable register */
#define IER_IRxE 0x1
#define IER_ITxE 0x2
#define IER_ILE 0x4
#define IER_IME 0x8
/* interrupt identification register */
#define IIR_IMASK 0xf /* mask */
#define IIR_RXTOUT 0xc /* receive timeout */
#define IIR_RLS 0x6 /* receive line status */
#define IIR_RXRDY 0x4 /* receive ready */
#define IIR_TXRDY 0x2 /* transmit ready */
#define IIR_NOPEND 0x1 /* nothing */
#define IIR_MLSC 0x0 /* modem status */
#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
/* fifo control register */
#define FIFO_ENABLE 0x01 /* enable fifo */
#define FIFO_RCV_RST 0x02 /* reset receive fifo */
#define FIFO_XMT_RST 0x04 /* reset transmit fifo */
#define FIFO_DMA_MODE 0x08 /* enable dma mode */
#define FIFO_TRIGGER_1 0x00 /* trigger at 1 char */
#define FIFO_TRIGGER_4 0x40 /* trigger at 4 chars */
#define FIFO_TRIGGER_8 0x80 /* trigger at 8 chars */
#define FIFO_TRIGGER_14 0xc0 /* trigger at 14 chars */
/* character format control register */
#define CFCR_DLAB 0x80 /* divisor latch */
#define CFCR_SBREAK 0x40 /* send break */
#define CFCR_PZERO 0x30 /* zero parity */
#define CFCR_PONE 0x20 /* one parity */
#define CFCR_PEVEN 0x10 /* even parity */
#define CFCR_PODD 0x00 /* odd parity */
#define CFCR_PENAB 0x08 /* parity enable */
#define CFCR_STOPB 0x04 /* 2 stop bits */
#define CFCR_8BITS 0x03 /* 8 data bits */
#define CFCR_7BITS 0x02 /* 7 data bits */
#define CFCR_6BITS 0x01 /* 6 data bits */
#define CFCR_5BITS 0x00 /* 5 data bits */
/* modem control register */
#define MCR_LOOPBACK 0x10 /* loopback */
#define MCR_IENABLE 0x08 /* output 2 = int enable */
#define MCR_DRS 0x04 /* output 1 = xxx */
#define MCR_RTS 0x02 /* enable RTS */
#define MCR_DTR 0x01 /* enable DTR */
/* line status register */
#define LSR_RCV_FIFO 0x80 /* error in receive fifo */
#define LSR_TSRE 0x40 /* transmitter empty */
#define LSR_TXRDY 0x20 /* transmitter ready */
#define LSR_BI 0x10 /* break detected */
#define LSR_FE 0x08 /* framing error */
#define LSR_PE 0x04 /* parity error */
#define LSR_OE 0x02 /* overrun error */
#define LSR_RXRDY 0x01 /* receiver ready */
#define LSR_RCV_MASK 0x1f
/* External clock frequency */
#define AHB_CLK (24000000)
#define APB_CLK (AHB_CLK)
/* START_FREQ register bits */
#define M_PLL_SHIFT (8)
#define M_PLL (0xff << M_PLL_SHIFT)
#define FRAC_N_SHIFT (16)
#define FRAC_N (0xff << FRAC_N_SHIFT)
#define DIV_SDRAM_SHIFT (0)
#define DIV_SDRAM (0x3 << DIV_SDRAM_SHIFT)
/* CLK_DIV_PARAM register bits */
#define DIV_PIX_EN (0x1 << 31)
#define DIV_PIX (0x7f << 24)
#define DIV_CAM_EN (0x1 << 23)
#define DIV_CAM (0x7f << 16)
#define DIV_CPU_EN (0x1 << 15)
#define DIV_CPU (0x7f << 8)
#define DIV_PIX_VALID (0x1 << 5)
#define DIV_PIX_SEL (0x1 << 4)
#define DIV_CAM_VALID (0x1 << 3)
#define DIV_CAM_SEL (0x1 << 2)
#define DIV_CPU_VALID (0x1 << 1)
#define DIV_CPU_SEL (0x1 << 0)
#define DIV_PIX_SHIFT (24)
#define DIV_CAM_SHIFT (16)
#define DIV_CPU_SHIFT (8)
#endif
|
