path: root/bsp/nuvoton/libraries/m460/StdDriver/src/nu_spi.c

/**************************************************************************//**
 * @file     spi.c
 * @version  V3.00
 * @brief    M460 series SPI driver source file
 *
 * @copyright SPDX-License-Identifier: Apache-2.0
 * @copyright Copyright (C) 2021 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#include "NuMicro.h"

/** @addtogroup Standard_Driver Standard Driver
  @{
*/

/** @addtogroup SPI_Driver SPI Driver
  @{
*/


/** @addtogroup SPI_EXPORTED_FUNCTIONS SPI Exported Functions
  @{
*/
static uint32_t SPII2S_GetSourceClockFreq(SPI_T *i2s);

/**
  * @brief  This function make SPI module be ready to transfer.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32MasterSlave Decides the SPI module is operating in master mode or in slave mode. (SPI_SLAVE, SPI_MASTER)
  * @param[in]  u32SPIMode Decides the transfer timing. (SPI_MODE_0, SPI_MODE_1, SPI_MODE_2, SPI_MODE_3)
  * @param[in]  u32DataWidth Decides the data width of a SPI transaction.
  * @param[in]  u32BusClock The expected frequency of SPI bus clock in Hz.
  * @return Actual frequency of SPI peripheral clock.
  * @details By default, the SPI transfer sequence is MSB first, the slave selection signal is active low and the automatic
  *          slave selection function is disabled.
  *          In Slave mode, the u32BusClock shall be NULL and the SPI clock divider setting will be 0.
  *          The actual clock rate may be different from the target SPI clock rate.
  *          For example, if the SPI source clock rate is 12 MHz and the target SPI bus clock rate is 7 MHz, the
  *          actual SPI clock rate will be 6 MHz.
  * @note   If u32BusClock = 0, DIVIDER setting will be set to the maximum value.
  * @note   If u32BusClock >= system clock frequency, SPI peripheral clock source will be set to APB clock and DIVIDER will be set to 0.
  * @note   If u32BusClock >= SPI peripheral clock source, DIVIDER will be set to 0.
  * @note   In slave mode, the SPI peripheral clock rate will be equal to APB clock rate.
  */
uint32_t SPI_Open(SPI_T *spi,
                  uint32_t u32MasterSlave,
                  uint32_t u32SPIMode,
                  uint32_t u32DataWidth,
                  uint32_t u32BusClock)
{
    uint32_t u32ClkSrc = 0U, u32Div, u32HCLKFreq, u32RetValue = 0U;

    /* Disable I2S mode */
    spi->I2SCTL &= ~SPI_I2SCTL_I2SEN_Msk;

    if (u32DataWidth == 32U)
    {
        u32DataWidth = 0U;
    }

    /* Get system clock frequency */
    u32HCLKFreq = CLK_GetHCLKFreq();

    if (u32MasterSlave == SPI_MASTER)
    {
        /* Default setting: slave selection signal is active low; disable automatic slave selection function. */
        spi->SSCTL = SPI_SS_ACTIVE_LOW;

        /* Default setting: MSB first, disable unit transfer interrupt, SP_CYCLE = 0. */
        spi->CTL = u32MasterSlave | (u32DataWidth << SPI_CTL_DWIDTH_Pos) | (u32SPIMode) | SPI_CTL_SPIEN_Msk;

        if (u32BusClock >= u32HCLKFreq)
        {
            /* Select PCLK as the clock source of SPI */
            if (spi == SPI0)
            {
                CLK->CLKSEL2 = (CLK->CLKSEL2 & (~CLK_CLKSEL2_SPI0SEL_Msk)) | CLK_CLKSEL2_SPI0SEL_PCLK1;
            }
            else if (spi == SPI1)
            {
                CLK->CLKSEL2 = (CLK->CLKSEL2 & (~CLK_CLKSEL2_SPI1SEL_Msk)) | CLK_CLKSEL2_SPI1SEL_PCLK0;
            }
            else if (spi == SPI2)
            {
                CLK->CLKSEL3 = (CLK->CLKSEL3 & (~CLK_CLKSEL3_SPI2SEL_Msk)) | CLK_CLKSEL3_SPI2SEL_PCLK1;
            }
            else if (spi == SPI3)
            {
                CLK->CLKSEL3 = (CLK->CLKSEL3 & (~CLK_CLKSEL3_SPI3SEL_Msk)) | CLK_CLKSEL3_SPI3SEL_PCLK0;
            }
            else if (spi == SPI4)
            {
                CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI4SEL_Msk)) | CLK_CLKSEL4_SPI4SEL_PCLK1;
            }
            else if (spi == SPI5)
            {
                CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI5SEL_Msk)) | CLK_CLKSEL4_SPI5SEL_PCLK0;
            }
            else if (spi == SPI6)
            {
                CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI6SEL_Msk)) | CLK_CLKSEL4_SPI6SEL_PCLK1;
            }
            else if (spi == SPI7)
            {
                CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI7SEL_Msk)) | CLK_CLKSEL4_SPI7SEL_PCLK0;
            }
            else if (spi == SPI8)
            {
                CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI8SEL_Msk)) | CLK_CLKSEL4_SPI8SEL_PCLK1;
            }
            else if (spi == SPI9)
            {
                CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI9SEL_Msk)) | CLK_CLKSEL4_SPI9SEL_PCLK0;
            }
            else
            {
                CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI10SEL_Msk)) | CLK_CLKSEL4_SPI10SEL_PCLK1;
            }
        }

        /* Check clock source of SPI */
        if (spi == SPI0)
        {
            if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_PCLK1)
            {
                u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
            }
            else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HIRC)
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
            else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HIRC48M)
            {
                u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
            }
            else
            {
                u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
            }
        }
        else if (spi == SPI1)
        {
            if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_PCLK0)
            {
                u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
            }
            else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HIRC)
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
            else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HIRC48M)
            {
                u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
            }
            else
            {
                u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
            }
        }
        else if (spi == SPI2)
        {
            if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_PCLK1)
            {
                u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
            }
            else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HIRC)
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
            else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HIRC48M)
            {
                u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
            }
            else
            {
                u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
            }
        }
        else if (spi == SPI3)
        {
            if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_PCLK0)
            {
                u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
            }
            else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HIRC)
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
            else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HIRC48M)
            {
                u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
            }
            else
            {
                u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
            }
        }
        else if (spi == SPI4)
        {
            if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI4SEL_Msk) == CLK_CLKSEL4_SPI4SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI4SEL_Msk) == CLK_CLKSEL4_SPI4SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI4SEL_Msk) == CLK_CLKSEL4_SPI4SEL_PCLK1)
            {
                u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
            }
            else
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
        }
        else if (spi == SPI5)
        {
            if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI5SEL_Msk) == CLK_CLKSEL4_SPI5SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI5SEL_Msk) == CLK_CLKSEL4_SPI5SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI5SEL_Msk) == CLK_CLKSEL4_SPI5SEL_PCLK0)
            {
                u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
            }
            else
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
        }
        else if (spi == SPI6)
        {
            if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI6SEL_Msk) == CLK_CLKSEL4_SPI6SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI6SEL_Msk) == CLK_CLKSEL4_SPI6SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI6SEL_Msk) == CLK_CLKSEL4_SPI6SEL_PCLK1)
            {
                u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
            }
            else
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
        }
        else if (spi == SPI7)
        {
            if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI7SEL_Msk) == CLK_CLKSEL4_SPI7SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI7SEL_Msk) == CLK_CLKSEL4_SPI7SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI7SEL_Msk) == CLK_CLKSEL4_SPI7SEL_PCLK0)
            {
                u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
            }
            else
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
        }
        else if (spi == SPI8)
        {
            if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI8SEL_Msk) == CLK_CLKSEL4_SPI8SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI8SEL_Msk) == CLK_CLKSEL4_SPI8SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI8SEL_Msk) == CLK_CLKSEL4_SPI8SEL_PCLK1)
            {
                u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
            }
            else
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
        }
        else if (spi == SPI9)
        {
            if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI9SEL_Msk) == CLK_CLKSEL4_SPI9SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI9SEL_Msk) == CLK_CLKSEL4_SPI9SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI9SEL_Msk) == CLK_CLKSEL4_SPI9SEL_PCLK0)
            {
                u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
            }
            else
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
        }
        else
        {
            if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI10SEL_Msk) == CLK_CLKSEL4_SPI10SEL_HXT)
            {
                u32ClkSrc = __HXT; /* Clock source is HXT */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI10SEL_Msk) == CLK_CLKSEL4_SPI10SEL_PLL_DIV2)
            {
                u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
            }
            else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI10SEL_Msk) == CLK_CLKSEL4_SPI10SEL_PCLK1)
            {
                u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
            }
            else
            {
                u32ClkSrc = __HIRC; /* Clock source is HIRC */
            }
        }

        if (u32BusClock >= u32HCLKFreq)
        {
            /* Set DIVIDER = 0 */
            spi->CLKDIV = 0U;
            /* Return master peripheral clock rate */
            u32RetValue = u32ClkSrc;
        }
        else if (u32BusClock >= u32ClkSrc)
        {
            /* Set DIVIDER = 0 */
            spi->CLKDIV = 0U;
            /* Return master peripheral clock rate */
            u32RetValue = u32ClkSrc;
        }
        else if (u32BusClock == 0U)
        {
            /* Set DIVIDER to the maximum value 0x1FF. f_spi = f_spi_clk_src / (DIVIDER + 1) */
            spi->CLKDIV |= SPI_CLKDIV_DIVIDER_Msk;
            /* Return master peripheral clock rate */
            u32RetValue = (u32ClkSrc / (0x1FFU + 1U));
        }
        else
        {
            u32Div = (((u32ClkSrc * 10U) / u32BusClock + 5U) / 10U) - 1U; /* Round to the nearest integer */
            if (u32Div > 0x1FFU)
            {
                u32Div = 0x1FFU;
                spi->CLKDIV |= SPI_CLKDIV_DIVIDER_Msk;
                /* Return master peripheral clock rate */
                u32RetValue = (u32ClkSrc / (0x1FFU + 1U));
            }
            else
            {
                spi->CLKDIV = (spi->CLKDIV & (~SPI_CLKDIV_DIVIDER_Msk)) | (u32Div << SPI_CLKDIV_DIVIDER_Pos);
                /* Return master peripheral clock rate */
                u32RetValue = (u32ClkSrc / (u32Div + 1U));
            }
        }
    }
    else     /* For slave mode, force the SPI peripheral clock rate to equal APB clock rate. */
    {
        /* Default setting: slave selection signal is low level active. */
        spi->SSCTL = SPI_SS_ACTIVE_LOW;

        /* Default setting: MSB first, disable unit transfer interrupt, SP_CYCLE = 0. */
        spi->CTL = u32MasterSlave | (u32DataWidth << SPI_CTL_DWIDTH_Pos) | (u32SPIMode) | SPI_CTL_SPIEN_Msk;

        /* Set DIVIDER = 0 */
        spi->CLKDIV = 0U;

        /* Select PCLK as the clock source of SPI */
        if (spi == SPI0)
        {
            CLK->CLKSEL2 = (CLK->CLKSEL2 & (~CLK_CLKSEL2_SPI0SEL_Msk)) | CLK_CLKSEL2_SPI0SEL_PCLK1;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK1Freq();
        }
        else if (spi == SPI1)
        {
            CLK->CLKSEL2 = (CLK->CLKSEL2 & (~CLK_CLKSEL2_SPI1SEL_Msk)) | CLK_CLKSEL2_SPI1SEL_PCLK0;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK0Freq();
        }
        else if (spi == SPI2)
        {
            CLK->CLKSEL3 = (CLK->CLKSEL3 & (~CLK_CLKSEL3_SPI2SEL_Msk)) | CLK_CLKSEL3_SPI2SEL_PCLK1;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK1Freq();
        }
        else if (spi == SPI3)
        {
            CLK->CLKSEL3 = (CLK->CLKSEL3 & (~CLK_CLKSEL3_SPI3SEL_Msk)) | CLK_CLKSEL3_SPI3SEL_PCLK0;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK0Freq();
        }
        else if (spi == SPI4)
        {
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI4SEL_Msk)) | CLK_CLKSEL4_SPI4SEL_PCLK1;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK1Freq();
        }
        else if (spi == SPI5)
        {
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI5SEL_Msk)) | CLK_CLKSEL4_SPI5SEL_PCLK0;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK0Freq();
        }
        else if (spi == SPI6)
        {
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI6SEL_Msk)) | CLK_CLKSEL4_SPI6SEL_PCLK1;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK1Freq();
        }
        else if (spi == SPI7)
        {
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI7SEL_Msk)) | CLK_CLKSEL4_SPI7SEL_PCLK0;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK0Freq();
        }
        else if (spi == SPI8)
        {
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI8SEL_Msk)) | CLK_CLKSEL4_SPI8SEL_PCLK1;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK1Freq();
        }
        else if (spi == SPI9)
        {
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI9SEL_Msk)) | CLK_CLKSEL4_SPI9SEL_PCLK0;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK0Freq();
        }
        else
        {
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI10SEL_Msk)) | CLK_CLKSEL4_SPI10SEL_PCLK1;
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK1Freq();
        }
    }

    return u32RetValue;
}

/**
  * @brief  Disable SPI controller.
  * @param[in]  spi The pointer of the specified SPI module.
  * @return None
  * @details This function will reset SPI controller.
  */
void SPI_Close(SPI_T *spi)
{
    if (spi == SPI0)
    {
        /* Reset SPI */
        SYS->IPRST1 |= SYS_IPRST1_SPI0RST_Msk;
        SYS->IPRST1 &= ~SYS_IPRST1_SPI0RST_Msk;
    }
    else if (spi == SPI1)
    {
        /* Reset SPI */
        SYS->IPRST1 |= SYS_IPRST1_SPI1RST_Msk;
        SYS->IPRST1 &= ~SYS_IPRST1_SPI1RST_Msk;
    }
    else if (spi == SPI2)
    {
        /* Reset SPI */
        SYS->IPRST1 |= SYS_IPRST1_SPI2RST_Msk;
        SYS->IPRST1 &= ~SYS_IPRST1_SPI2RST_Msk;
    }
    else if (spi == SPI3)
    {
        /* Reset SPI */
        SYS->IPRST2 |= SYS_IPRST2_SPI3RST_Msk;
        SYS->IPRST2 &= ~SYS_IPRST2_SPI3RST_Msk;
    }
    else if (spi == SPI4)
    {
        /* Reset SPI */
        SYS->IPRST2 |= SYS_IPRST2_SPI4RST_Msk;
        SYS->IPRST2 &= ~SYS_IPRST2_SPI4RST_Msk;
    }
    else if (spi == SPI5)
    {
        /* Reset SPI */
        SYS->IPRST3 |= SYS_IPRST3_SPI5RST_Msk;
        SYS->IPRST3 &= ~SYS_IPRST3_SPI5RST_Msk;
    }
    else if (spi == SPI6)
    {
        /* Reset SPI */
        SYS->IPRST3 |= SYS_IPRST3_SPI6RST_Msk;
        SYS->IPRST3 &= ~SYS_IPRST3_SPI6RST_Msk;
    }
    else if (spi == SPI7)
    {
        /* Reset SPI */
        SYS->IPRST3 |= SYS_IPRST3_SPI7RST_Msk;
        SYS->IPRST3 &= ~SYS_IPRST3_SPI7RST_Msk;
    }
    else if (spi == SPI8)
    {
        /* Reset SPI */
        SYS->IPRST3 |= SYS_IPRST3_SPI8RST_Msk;
        SYS->IPRST3 &= ~SYS_IPRST3_SPI8RST_Msk;
    }
    else if (spi == SPI9)
    {
        /* Reset SPI */
        SYS->IPRST3 |= SYS_IPRST3_SPI9RST_Msk;
        SYS->IPRST3 &= ~SYS_IPRST3_SPI9RST_Msk;
    }
    else
    {
        /* Reset SPI */
        SYS->IPRST3 |= SYS_IPRST3_SPI10RST_Msk;
        SYS->IPRST3 &= ~SYS_IPRST3_SPI10RST_Msk;
    }
}

/**
  * @brief  Clear RX FIFO buffer.
  * @param[in]  spi The pointer of the specified SPI module.
  * @return None
  * @details This function will clear SPI RX FIFO buffer. The RXEMPTY (SPI_STATUS[8]) will be set to 1.
  */
void SPI_ClearRxFIFO(SPI_T *spi)
{
    spi->FIFOCTL |= SPI_FIFOCTL_RXFBCLR_Msk;
}

/**
  * @brief  Clear TX FIFO buffer.
  * @param[in]  spi The pointer of the specified SPI module.
  * @return None
  * @details This function will clear SPI TX FIFO buffer. The TXEMPTY (SPI_STATUS[16]) will be set to 1.
  * @note The TX shift register will not be cleared.
  */
void SPI_ClearTxFIFO(SPI_T *spi)
{
    spi->FIFOCTL |= SPI_FIFOCTL_TXFBCLR_Msk;
}

/**
  * @brief  Disable the automatic slave selection function.
  * @param[in]  spi The pointer of the specified SPI module.
  * @return None
  * @details This function will disable the automatic slave selection function and set slave selection signal to inactive state.
  */
void SPI_DisableAutoSS(SPI_T *spi)
{
    spi->SSCTL &= ~(SPI_SSCTL_AUTOSS_Msk | SPI_SSCTL_SS_Msk);
}

/**
  * @brief  Enable the automatic slave selection function.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32SSPinMask Specifies slave selection pins. (SPI_SS)
  * @param[in]  u32ActiveLevel Specifies the active level of slave selection signal. (SPI_SS_ACTIVE_HIGH, SPI_SS_ACTIVE_LOW)
  * @return None
  * @details This function will enable the automatic slave selection function. Only available in Master mode.
  *          The slave selection pin and the active level will be set in this function.
  */
void SPI_EnableAutoSS(SPI_T *spi, uint32_t u32SSPinMask, uint32_t u32ActiveLevel)
{
    spi->SSCTL = (spi->SSCTL & (~(SPI_SSCTL_AUTOSS_Msk | SPI_SSCTL_SSACTPOL_Msk | SPI_SSCTL_SS_Msk))) | (u32SSPinMask | u32ActiveLevel | SPI_SSCTL_AUTOSS_Msk);
}

/**
  * @brief  Set the SPI bus clock.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32BusClock The expected frequency of SPI bus clock in Hz.
  * @return Actual frequency of SPI bus clock.
  * @details This function is only available in Master mode. The actual clock rate may be different from the target SPI bus clock rate.
  *          For example, if the SPI source clock rate is 12 MHz and the target SPI bus clock rate is 7 MHz, the actual SPI bus clock
  *          rate will be 6 MHz.
  * @note   If u32BusClock = 0, DIVIDER setting will be set to the maximum value.
  * @note   If u32BusClock >= system clock frequency, SPI peripheral clock source will be set to APB clock and DIVIDER will be set to 0.
  * @note   If u32BusClock >= SPI peripheral clock source, DIVIDER will be set to 0.
  */
uint32_t SPI_SetBusClock(SPI_T *spi, uint32_t u32BusClock)
{
    uint32_t u32ClkSrc, u32HCLKFreq;
    uint32_t u32Div, u32RetValue;

    /* Get system clock frequency */
    u32HCLKFreq = CLK_GetHCLKFreq();

    if (u32BusClock >= u32HCLKFreq)
    {
        /* Select PCLK as the clock source of SPI */
        if (spi == SPI0)
            CLK->CLKSEL2 = (CLK->CLKSEL2 & (~CLK_CLKSEL2_SPI0SEL_Msk)) | CLK_CLKSEL2_SPI0SEL_PCLK1;
        else if (spi == SPI1)
            CLK->CLKSEL2 = (CLK->CLKSEL2 & (~CLK_CLKSEL2_SPI1SEL_Msk)) | CLK_CLKSEL2_SPI1SEL_PCLK0;
        else if (spi == SPI2)
            CLK->CLKSEL3 = (CLK->CLKSEL3 & (~CLK_CLKSEL3_SPI2SEL_Msk)) | CLK_CLKSEL3_SPI2SEL_PCLK1;
        else  if (spi == SPI3)
            CLK->CLKSEL3 = (CLK->CLKSEL3 & (~CLK_CLKSEL3_SPI3SEL_Msk)) | CLK_CLKSEL3_SPI3SEL_PCLK0;
        else if (spi == SPI4)
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI4SEL_Msk)) | CLK_CLKSEL4_SPI4SEL_PCLK1;
        else if (spi == SPI5)
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI5SEL_Msk)) | CLK_CLKSEL4_SPI5SEL_PCLK0;
        else if (spi == SPI6)
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI6SEL_Msk)) | CLK_CLKSEL4_SPI6SEL_PCLK1;
        else if (spi == SPI7)
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI7SEL_Msk)) | CLK_CLKSEL4_SPI7SEL_PCLK0;
        else if (spi == SPI8)
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI8SEL_Msk)) | CLK_CLKSEL4_SPI8SEL_PCLK1;
        else if (spi == SPI9)
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI9SEL_Msk)) | CLK_CLKSEL4_SPI9SEL_PCLK0;
        else
            CLK->CLKSEL4 = (CLK->CLKSEL4 & (~CLK_CLKSEL4_SPI10SEL_Msk)) | CLK_CLKSEL4_SPI10SEL_PCLK1;
    }

    /* Check clock source of SPI */
    if (spi == SPI0)
    {
        if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HIRC)
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HIRC48M)
        {
            u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (spi == SPI1)
    {
        if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HIRC)
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HIRC48M)
        {
            u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (spi == SPI2)
    {
        if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HIRC)
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HIRC48M)
        {
            u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (spi == SPI3)
    {
        if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HIRC)
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HIRC48M)
        {
            u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (spi == SPI4)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI4SEL_Msk) == CLK_CLKSEL4_SPI4SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI4SEL_Msk) == CLK_CLKSEL4_SPI4SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI4SEL_Msk) == CLK_CLKSEL4_SPI4SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI5)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI5SEL_Msk) == CLK_CLKSEL4_SPI5SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI5SEL_Msk) == CLK_CLKSEL4_SPI5SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI5SEL_Msk) == CLK_CLKSEL4_SPI5SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI6)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI6SEL_Msk) == CLK_CLKSEL4_SPI6SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI6SEL_Msk) == CLK_CLKSEL4_SPI6SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI6SEL_Msk) == CLK_CLKSEL4_SPI6SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI7)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI7SEL_Msk) == CLK_CLKSEL4_SPI7SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI7SEL_Msk) == CLK_CLKSEL4_SPI7SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI7SEL_Msk) == CLK_CLKSEL4_SPI7SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI8)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI8SEL_Msk) == CLK_CLKSEL4_SPI8SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI8SEL_Msk) == CLK_CLKSEL4_SPI8SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI8SEL_Msk) == CLK_CLKSEL4_SPI8SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI9)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI9SEL_Msk) == CLK_CLKSEL4_SPI9SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI9SEL_Msk) == CLK_CLKSEL4_SPI9SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI9SEL_Msk) == CLK_CLKSEL4_SPI9SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI10SEL_Msk) == CLK_CLKSEL4_SPI10SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI10SEL_Msk) == CLK_CLKSEL4_SPI10SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI10SEL_Msk) == CLK_CLKSEL4_SPI10SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }

    if (u32BusClock >= u32HCLKFreq)
    {
        /* Set DIVIDER = 0 */
        spi->CLKDIV = 0U;
        /* Return master peripheral clock rate */
        u32RetValue = u32ClkSrc;
    }
    else if (u32BusClock >= u32ClkSrc)
    {
        /* Set DIVIDER = 0 */
        spi->CLKDIV = 0U;
        /* Return master peripheral clock rate */
        u32RetValue = u32ClkSrc;
    }
    else if (u32BusClock == 0U)
    {
        /* Set DIVIDER to the maximum value 0x1FF. f_spi = f_spi_clk_src / (DIVIDER + 1) */
        spi->CLKDIV |= SPI_CLKDIV_DIVIDER_Msk;
        /* Return master peripheral clock rate */
        u32RetValue = (u32ClkSrc / (0x1FFU + 1U));
    }
    else
    {
        u32Div = (((u32ClkSrc * 10U) / u32BusClock + 5U) / 10U) - 1U; /* Round to the nearest integer */
        if (u32Div > 0x1FFU)
        {
            u32Div = 0x1FFU;
            spi->CLKDIV |= SPI_CLKDIV_DIVIDER_Msk;
            /* Return master peripheral clock rate */
            u32RetValue = (u32ClkSrc / (0x1FFU + 1U));
        }
        else
        {
            spi->CLKDIV = (spi->CLKDIV & (~SPI_CLKDIV_DIVIDER_Msk)) | (u32Div << SPI_CLKDIV_DIVIDER_Pos);
            /* Return master peripheral clock rate */
            u32RetValue = (u32ClkSrc / (u32Div + 1U));
        }
    }

    return u32RetValue;
}

/**
  * @brief  Configure FIFO threshold setting.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32TxThreshold Decides the TX FIFO threshold. It could be 0 ~ 3. If data width is 4 ~ 16 bits, it could be 0 ~ 7.
  * @param[in]  u32RxThreshold Decides the RX FIFO threshold. It could be 0 ~ 3. If data width is 4 ~ 16 bits, it could be 0 ~ 7.
  * @return None
  * @details Set TX FIFO threshold and RX FIFO threshold configurations.
  */
void SPI_SetFIFO(SPI_T *spi, uint32_t u32TxThreshold, uint32_t u32RxThreshold)
{
    spi->FIFOCTL = (spi->FIFOCTL & ~(SPI_FIFOCTL_TXTH_Msk | SPI_FIFOCTL_RXTH_Msk)) |
                   (u32TxThreshold << SPI_FIFOCTL_TXTH_Pos) |
                   (u32RxThreshold << SPI_FIFOCTL_RXTH_Pos);
}

/**
  * @brief  Get the actual frequency of SPI bus clock. Only available in Master mode.
  * @param[in]  spi The pointer of the specified SPI module.
  * @return Actual SPI bus clock frequency in Hz.
  * @details This function will calculate the actual SPI bus clock rate according to the SPIxSEL and DIVIDER settings. Only available in Master mode.
  */
uint32_t SPI_GetBusClock(SPI_T *spi)
{
    uint32_t u32Div;
    uint32_t u32ClkSrc;

    /* Get DIVIDER setting */
    u32Div = (spi->CLKDIV & SPI_CLKDIV_DIVIDER_Msk) >> SPI_CLKDIV_DIVIDER_Pos;

    /* Check clock source of SPI */
    if (spi == SPI0)
    {
        if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HIRC)
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HIRC48M)
        {
            u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (spi == SPI1)
    {
        if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HIRC)
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HIRC48M)
        {
            u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (spi == SPI2)
    {
        if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HIRC)
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HIRC48M)
        {
            u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (spi == SPI3)
    {
        if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HIRC)
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HIRC48M)
        {
            u32ClkSrc = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32ClkSrc = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (spi == SPI4)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI4SEL_Msk) == CLK_CLKSEL4_SPI4SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI4SEL_Msk) == CLK_CLKSEL4_SPI4SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI4SEL_Msk) == CLK_CLKSEL4_SPI4SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI5)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI5SEL_Msk) == CLK_CLKSEL4_SPI5SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI5SEL_Msk) == CLK_CLKSEL4_SPI5SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI5SEL_Msk) == CLK_CLKSEL4_SPI5SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI6)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI6SEL_Msk) == CLK_CLKSEL4_SPI6SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI6SEL_Msk) == CLK_CLKSEL4_SPI6SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI6SEL_Msk) == CLK_CLKSEL4_SPI6SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI7)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI7SEL_Msk) == CLK_CLKSEL4_SPI7SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI7SEL_Msk) == CLK_CLKSEL4_SPI7SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI7SEL_Msk) == CLK_CLKSEL4_SPI7SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI8)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI8SEL_Msk) == CLK_CLKSEL4_SPI8SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI8SEL_Msk) == CLK_CLKSEL4_SPI8SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI8SEL_Msk) == CLK_CLKSEL4_SPI8SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else if (spi == SPI9)
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI9SEL_Msk) == CLK_CLKSEL4_SPI9SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI9SEL_Msk) == CLK_CLKSEL4_SPI9SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI9SEL_Msk) == CLK_CLKSEL4_SPI9SEL_PCLK0)
        {
            u32ClkSrc = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }
    else
    {
        if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI10SEL_Msk) == CLK_CLKSEL4_SPI10SEL_HXT)
        {
            u32ClkSrc = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI10SEL_Msk) == CLK_CLKSEL4_SPI10SEL_PLL_DIV2)
        {
            u32ClkSrc = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL4 & CLK_CLKSEL4_SPI10SEL_Msk) == CLK_CLKSEL4_SPI10SEL_PCLK1)
        {
            u32ClkSrc = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else
        {
            u32ClkSrc = __HIRC; /* Clock source is HIRC */
        }
    }

    /* Return SPI bus clock rate */
    return (u32ClkSrc / (u32Div + 1U));
}

/**
  * @brief  Enable interrupt function.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32Mask The combination of all related interrupt enable bits.
  *                     Each bit corresponds to a interrupt enable bit.
  *                     This parameter decides which interrupts will be enabled. It is combination of:
  *                       - \ref SPI_UNIT_INT_MASK
  *                       - \ref SPI_SSACT_INT_MASK
  *                       - \ref SPI_SSINACT_INT_MASK
  *                       - \ref SPI_SLVUR_INT_MASK
  *                       - \ref SPI_SLVBE_INT_MASK
  *                       - \ref SPI_TXUF_INT_MASK
  *                       - \ref SPI_FIFO_TXTH_INT_MASK
  *                       - \ref SPI_FIFO_RXTH_INT_MASK
  *                       - \ref SPI_FIFO_RXOV_INT_MASK
  *                       - \ref SPI_FIFO_RXTO_INT_MASK
  *
  * @return None
  * @details Enable SPI related interrupts specified by u32Mask parameter.
  */
void SPI_EnableInt(SPI_T *spi, uint32_t u32Mask)
{
    /* Enable unit transfer interrupt flag */
    if ((u32Mask & SPI_UNIT_INT_MASK) == SPI_UNIT_INT_MASK)
    {
        spi->CTL |= SPI_CTL_UNITIEN_Msk;
    }

    /* Enable slave selection signal active interrupt flag */
    if ((u32Mask & SPI_SSACT_INT_MASK) == SPI_SSACT_INT_MASK)
    {
        spi->SSCTL |= SPI_SSCTL_SSACTIEN_Msk;
    }

    /* Enable slave selection signal inactive interrupt flag */
    if ((u32Mask & SPI_SSINACT_INT_MASK) == SPI_SSINACT_INT_MASK)
    {
        spi->SSCTL |= SPI_SSCTL_SSINAIEN_Msk;
    }

    /* Enable slave TX under run interrupt flag */
    if ((u32Mask & SPI_SLVUR_INT_MASK) == SPI_SLVUR_INT_MASK)
    {
        spi->SSCTL |= SPI_SSCTL_SLVURIEN_Msk;
    }

    /* Enable slave bit count error interrupt flag */
    if ((u32Mask & SPI_SLVBE_INT_MASK) == SPI_SLVBE_INT_MASK)
    {
        spi->SSCTL |= SPI_SSCTL_SLVBEIEN_Msk;
    }

    /* Enable slave TX underflow interrupt flag */
    if ((u32Mask & SPI_TXUF_INT_MASK) == SPI_TXUF_INT_MASK)
    {
        spi->FIFOCTL |= SPI_FIFOCTL_TXUFIEN_Msk;
    }

    /* Enable TX threshold interrupt flag */
    if ((u32Mask & SPI_FIFO_TXTH_INT_MASK) == SPI_FIFO_TXTH_INT_MASK)
    {
        spi->FIFOCTL |= SPI_FIFOCTL_TXTHIEN_Msk;
    }

    /* Enable RX threshold interrupt flag */
    if ((u32Mask & SPI_FIFO_RXTH_INT_MASK) == SPI_FIFO_RXTH_INT_MASK)
    {
        spi->FIFOCTL |= SPI_FIFOCTL_RXTHIEN_Msk;
    }

    /* Enable RX overrun interrupt flag */
    if ((u32Mask & SPI_FIFO_RXOV_INT_MASK) == SPI_FIFO_RXOV_INT_MASK)
    {
        spi->FIFOCTL |= SPI_FIFOCTL_RXOVIEN_Msk;
    }

    /* Enable RX time-out interrupt flag */
    if ((u32Mask & SPI_FIFO_RXTO_INT_MASK) == SPI_FIFO_RXTO_INT_MASK)
    {
        spi->FIFOCTL |= SPI_FIFOCTL_RXTOIEN_Msk;
    }
}

/**
  * @brief  Disable interrupt function.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32Mask The combination of all related interrupt enable bits.
  *                     Each bit corresponds to a interrupt bit.
  *                     This parameter decides which interrupts will be disabled. It is combination of:
  *                       - \ref SPI_UNIT_INT_MASK
  *                       - \ref SPI_SSACT_INT_MASK
  *                       - \ref SPI_SSINACT_INT_MASK
  *                       - \ref SPI_SLVUR_INT_MASK
  *                       - \ref SPI_SLVBE_INT_MASK
  *                       - \ref SPI_TXUF_INT_MASK
  *                       - \ref SPI_FIFO_TXTH_INT_MASK
  *                       - \ref SPI_FIFO_RXTH_INT_MASK
  *                       - \ref SPI_FIFO_RXOV_INT_MASK
  *                       - \ref SPI_FIFO_RXTO_INT_MASK
  *
  * @return None
  * @details Disable SPI related interrupts specified by u32Mask parameter.
  */
void SPI_DisableInt(SPI_T *spi, uint32_t u32Mask)
{
    /* Disable unit transfer interrupt flag */
    if ((u32Mask & SPI_UNIT_INT_MASK) == SPI_UNIT_INT_MASK)
    {
        spi->CTL &= ~SPI_CTL_UNITIEN_Msk;
    }

    /* Disable slave selection signal active interrupt flag */
    if ((u32Mask & SPI_SSACT_INT_MASK) == SPI_SSACT_INT_MASK)
    {
        spi->SSCTL &= ~SPI_SSCTL_SSACTIEN_Msk;
    }

    /* Disable slave selection signal inactive interrupt flag */
    if ((u32Mask & SPI_SSINACT_INT_MASK) == SPI_SSINACT_INT_MASK)
    {
        spi->SSCTL &= ~SPI_SSCTL_SSINAIEN_Msk;
    }

    /* Disable slave TX under run interrupt flag */
    if ((u32Mask & SPI_SLVUR_INT_MASK) == SPI_SLVUR_INT_MASK)
    {
        spi->SSCTL &= ~SPI_SSCTL_SLVURIEN_Msk;
    }

    /* Disable slave bit count error interrupt flag */
    if ((u32Mask & SPI_SLVBE_INT_MASK) == SPI_SLVBE_INT_MASK)
    {
        spi->SSCTL &= ~SPI_SSCTL_SLVBEIEN_Msk;
    }

    /* Disable slave TX underflow interrupt flag */
    if ((u32Mask & SPI_TXUF_INT_MASK) == SPI_TXUF_INT_MASK)
    {
        spi->FIFOCTL &= ~SPI_FIFOCTL_TXUFIEN_Msk;
    }

    /* Disable TX threshold interrupt flag */
    if ((u32Mask & SPI_FIFO_TXTH_INT_MASK) == SPI_FIFO_TXTH_INT_MASK)
    {
        spi->FIFOCTL &= ~SPI_FIFOCTL_TXTHIEN_Msk;
    }

    /* Disable RX threshold interrupt flag */
    if ((u32Mask & SPI_FIFO_RXTH_INT_MASK) == SPI_FIFO_RXTH_INT_MASK)
    {
        spi->FIFOCTL &= ~SPI_FIFOCTL_RXTHIEN_Msk;
    }

    /* Disable RX overrun interrupt flag */
    if ((u32Mask & SPI_FIFO_RXOV_INT_MASK) == SPI_FIFO_RXOV_INT_MASK)
    {
        spi->FIFOCTL &= ~SPI_FIFOCTL_RXOVIEN_Msk;
    }

    /* Disable RX time-out interrupt flag */
    if ((u32Mask & SPI_FIFO_RXTO_INT_MASK) == SPI_FIFO_RXTO_INT_MASK)
    {
        spi->FIFOCTL &= ~SPI_FIFOCTL_RXTOIEN_Msk;
    }
}

/**
  * @brief  Get interrupt flag.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32Mask The combination of all related interrupt sources.
  *                     Each bit corresponds to a interrupt source.
  *                     This parameter decides which interrupt flags will be read. It is combination of:
  *                       - \ref SPI_UNIT_INT_MASK
  *                       - \ref SPI_SSACT_INT_MASK
  *                       - \ref SPI_SSINACT_INT_MASK
  *                       - \ref SPI_SLVUR_INT_MASK
  *                       - \ref SPI_SLVBE_INT_MASK
  *                       - \ref SPI_TXUF_INT_MASK
  *                       - \ref SPI_FIFO_TXTH_INT_MASK
  *                       - \ref SPI_FIFO_RXTH_INT_MASK
  *                       - \ref SPI_FIFO_RXOV_INT_MASK
  *                       - \ref SPI_FIFO_RXTO_INT_MASK
  *
  * @return Interrupt flags of selected sources.
  * @details Get SPI related interrupt flags specified by u32Mask parameter.
  */
uint32_t SPI_GetIntFlag(SPI_T *spi, uint32_t u32Mask)
{
    uint32_t u32IntFlag = 0U, u32TmpVal;

    u32TmpVal = spi->STATUS & SPI_STATUS_UNITIF_Msk;
    /* Check unit transfer interrupt flag */
    if ((u32Mask & SPI_UNIT_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_UNIT_INT_MASK;
    }

    u32TmpVal = spi->STATUS & SPI_STATUS_SSACTIF_Msk;
    /* Check slave selection signal active interrupt flag */
    if ((u32Mask & SPI_SSACT_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_SSACT_INT_MASK;
    }

    u32TmpVal = spi->STATUS & SPI_STATUS_SSINAIF_Msk;
    /* Check slave selection signal inactive interrupt flag */
    if ((u32Mask & SPI_SSINACT_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_SSINACT_INT_MASK;
    }

    u32TmpVal = spi->STATUS & SPI_STATUS_SLVURIF_Msk;
    /* Check slave TX under run interrupt flag */
    if ((u32Mask & SPI_SLVUR_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_SLVUR_INT_MASK;
    }

    u32TmpVal = spi->STATUS & SPI_STATUS_SLVBEIF_Msk;
    /* Check slave bit count error interrupt flag */
    if ((u32Mask & SPI_SLVBE_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_SLVBE_INT_MASK;
    }

    u32TmpVal = spi->STATUS & SPI_STATUS_TXUFIF_Msk;
    /* Check slave TX underflow interrupt flag */
    if ((u32Mask & SPI_TXUF_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_TXUF_INT_MASK;
    }

    u32TmpVal = spi->STATUS & SPI_STATUS_TXTHIF_Msk;
    /* Check TX threshold interrupt flag */
    if ((u32Mask & SPI_FIFO_TXTH_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_FIFO_TXTH_INT_MASK;
    }

    u32TmpVal = spi->STATUS & SPI_STATUS_RXTHIF_Msk;
    /* Check RX threshold interrupt flag */
    if ((u32Mask & SPI_FIFO_RXTH_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_FIFO_RXTH_INT_MASK;
    }

    u32TmpVal = spi->STATUS & SPI_STATUS_RXOVIF_Msk;
    /* Check RX overrun interrupt flag */
    if ((u32Mask & SPI_FIFO_RXOV_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_FIFO_RXOV_INT_MASK;
    }

    u32TmpVal = spi->STATUS & SPI_STATUS_RXTOIF_Msk;
    /* Check RX time-out interrupt flag */
    if ((u32Mask & SPI_FIFO_RXTO_INT_MASK) && (u32TmpVal))
    {
        u32IntFlag |= SPI_FIFO_RXTO_INT_MASK;
    }

    return u32IntFlag;
}

/**
  * @brief  Clear interrupt flag.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32Mask The combination of all related interrupt sources.
  *                     Each bit corresponds to a interrupt source.
  *                     This parameter decides which interrupt flags will be cleared. It could be the combination of:
  *                       - \ref SPI_UNIT_INT_MASK
  *                       - \ref SPI_SSACT_INT_MASK
  *                       - \ref SPI_SSINACT_INT_MASK
  *                       - \ref SPI_SLVUR_INT_MASK
  *                       - \ref SPI_SLVBE_INT_MASK
  *                       - \ref SPI_TXUF_INT_MASK
  *                       - \ref SPI_FIFO_RXOV_INT_MASK
  *                       - \ref SPI_FIFO_RXTO_INT_MASK
  *
  * @return None
  * @details Clear SPI related interrupt flags specified by u32Mask parameter.
  */
void SPI_ClearIntFlag(SPI_T *spi, uint32_t u32Mask)
{
    if (u32Mask & SPI_UNIT_INT_MASK)
    {
        spi->STATUS = SPI_STATUS_UNITIF_Msk; /* Clear unit transfer interrupt flag */
    }

    if (u32Mask & SPI_SSACT_INT_MASK)
    {
        spi->STATUS = SPI_STATUS_SSACTIF_Msk; /* Clear slave selection signal active interrupt flag */
    }

    if (u32Mask & SPI_SSINACT_INT_MASK)
    {
        spi->STATUS = SPI_STATUS_SSINAIF_Msk; /* Clear slave selection signal inactive interrupt flag */
    }

    if (u32Mask & SPI_SLVUR_INT_MASK)
    {
        spi->STATUS = SPI_STATUS_SLVURIF_Msk; /* Clear slave TX under run interrupt flag */
    }

    if (u32Mask & SPI_SLVBE_INT_MASK)
    {
        spi->STATUS = SPI_STATUS_SLVBEIF_Msk; /* Clear slave bit count error interrupt flag */
    }

    if (u32Mask & SPI_TXUF_INT_MASK)
    {
        spi->STATUS = SPI_STATUS_TXUFIF_Msk; /* Clear slave TX underflow interrupt flag */
    }

    if (u32Mask & SPI_FIFO_RXOV_INT_MASK)
    {
        spi->STATUS = SPI_STATUS_RXOVIF_Msk; /* Clear RX overrun interrupt flag */
    }

    if (u32Mask & SPI_FIFO_RXTO_INT_MASK)
    {
        spi->STATUS = SPI_STATUS_RXTOIF_Msk; /* Clear RX time-out interrupt flag */
    }
}

/**
  * @brief  Get SPI status.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32Mask The combination of all related sources.
  *                     Each bit corresponds to a source.
  *                     This parameter decides which flags will be read. It is combination of:
  *                       - \ref SPI_BUSY_MASK
  *                       - \ref SPI_RX_EMPTY_MASK
  *                       - \ref SPI_RX_FULL_MASK
  *                       - \ref SPI_TX_EMPTY_MASK
  *                       - \ref SPI_TX_FULL_MASK
  *                       - \ref SPI_TXRX_RESET_MASK
  *                       - \ref SPI_SPIEN_STS_MASK
  *                       - \ref SPI_SSLINE_STS_MASK
  *
  * @return Flags of selected sources.
  * @details Get SPI related status specified by u32Mask parameter.
  */
uint32_t SPI_GetStatus(SPI_T *spi, uint32_t u32Mask)
{
    uint32_t u32Flag = 0U, u32TmpValue;

    u32TmpValue = spi->STATUS & SPI_STATUS_BUSY_Msk;
    /* Check busy status */
    if ((u32Mask & SPI_BUSY_MASK) && (u32TmpValue))
    {
        u32Flag |= SPI_BUSY_MASK;
    }

    u32TmpValue = spi->STATUS & SPI_STATUS_RXEMPTY_Msk;
    /* Check RX empty flag */
    if ((u32Mask & SPI_RX_EMPTY_MASK) && (u32TmpValue))
    {
        u32Flag |= SPI_RX_EMPTY_MASK;
    }

    u32TmpValue = spi->STATUS & SPI_STATUS_RXFULL_Msk;
    /* Check RX full flag */
    if ((u32Mask & SPI_RX_FULL_MASK) && (u32TmpValue))
    {
        u32Flag |= SPI_RX_FULL_MASK;
    }

    u32TmpValue = spi->STATUS & SPI_STATUS_TXEMPTY_Msk;
    /* Check TX empty flag */
    if ((u32Mask & SPI_TX_EMPTY_MASK) && (u32TmpValue))
    {
        u32Flag |= SPI_TX_EMPTY_MASK;
    }

    u32TmpValue = spi->STATUS & SPI_STATUS_TXFULL_Msk;
    /* Check TX full flag */
    if ((u32Mask & SPI_TX_FULL_MASK) && (u32TmpValue))
    {
        u32Flag |= SPI_TX_FULL_MASK;
    }

    u32TmpValue = spi->STATUS & SPI_STATUS_TXRXRST_Msk;
    /* Check TX/RX reset flag */
    if ((u32Mask & SPI_TXRX_RESET_MASK) && (u32TmpValue))
    {
        u32Flag |= SPI_TXRX_RESET_MASK;
    }

    u32TmpValue = spi->STATUS & SPI_STATUS_SPIENSTS_Msk;
    /* Check SPIEN flag */
    if ((u32Mask & SPI_SPIEN_STS_MASK) && (u32TmpValue))
    {
        u32Flag |= SPI_SPIEN_STS_MASK;
    }

    u32TmpValue = spi->STATUS & SPI_STATUS_SSLINE_Msk;
    /* Check SPIx_SS line status */
    if ((u32Mask & SPI_SSLINE_STS_MASK) && (u32TmpValue))
    {
        u32Flag |= SPI_SSLINE_STS_MASK;
    }

    return u32Flag;
}

/**
  * @brief  Get SPI status2.
  * @param[in]  spi The pointer of the specified SPI module.
  * @param[in]  u32Mask The combination of all related sources.
  *                     Each bit corresponds to a source.
  *                     This parameter decides which flags will be read. It is combination of:
  *                       - \ref SPI_SLVBENUM_MASK
  *
  * @return Flags of selected sources.
  * @details Get SPI related status specified by u32Mask parameter.
  */
uint32_t SPI_GetStatus2(SPI_T *spi, uint32_t u32Mask)
{
    uint32_t u32TmpStatus;
    uint32_t u32Number = 0U;

    u32TmpStatus = spi->STATUS2;

    /* Check effective bit number of uncompleted RX data status */
    if (u32Mask & SPI_SLVBENUM_MASK)
    {
        u32Number = (u32TmpStatus & SPI_STATUS2_SLVBENUM_Msk) >> SPI_STATUS2_SLVBENUM_Pos;
    }

    return u32Number;
}


/**
  * @brief  This function is used to get I2S source clock frequency.
  * @param[in]  i2s The pointer of the specified I2S module.
  * @return I2S source clock frequency (Hz).
  * @details Return the source clock frequency according to the setting of SPIxSEL.
  */
static uint32_t SPII2S_GetSourceClockFreq(SPI_T *i2s)
{
    uint32_t u32Freq;

    if (i2s == SPI0)
    {
        if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HXT)
        {
            u32Freq = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_PLL_DIV2)
        {
            u32Freq = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_PCLK1)
        {
            u32Freq = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HIRC)
        {
            u32Freq = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI0SEL_Msk) == CLK_CLKSEL2_SPI0SEL_HIRC48M)
        {
            u32Freq = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32Freq = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (i2s == SPI1)
    {
        if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HXT)
        {
            u32Freq = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_PLL_DIV2)
        {
            u32Freq = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_PCLK0)
        {
            u32Freq = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HIRC)
        {
            u32Freq = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL2 & CLK_CLKSEL2_SPI1SEL_Msk) == CLK_CLKSEL2_SPI1SEL_HIRC48M)
        {
            u32Freq = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32Freq = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else if (i2s == SPI2)
    {
        if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HXT)
        {
            u32Freq = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_PLL_DIV2)
        {
            u32Freq = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_PCLK1)
        {
            u32Freq = CLK_GetPCLK1Freq(); /* Clock source is PCLK1 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HIRC)
        {
            u32Freq = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI2SEL_Msk) == CLK_CLKSEL3_SPI2SEL_HIRC48M)
        {
            u32Freq = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32Freq = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }
    else
    {
        if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HXT)
        {
            u32Freq = __HXT; /* Clock source is HXT */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_PLL_DIV2)
        {
            u32Freq = (CLK_GetPLLClockFreq() >> 1); /* Clock source is PLL/2 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_PCLK0)
        {
            u32Freq = CLK_GetPCLK0Freq(); /* Clock source is PCLK0 */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HIRC)
        {
            u32Freq = __HIRC; /* Clock source is HIRC */
        }
        else if ((CLK->CLKSEL3 & CLK_CLKSEL3_SPI3SEL_Msk) == CLK_CLKSEL3_SPI3SEL_HIRC48M)
        {
            u32Freq = __HIRC48M; /* Clock source is RC48M */
        }
        else
        {
            u32Freq = (CLK_GetPLLFNClockFreq() >> 1); /* Clock source is PLLFN/2 */
        }
    }

    return u32Freq;
}

/**
  * @brief  This function configures some parameters of I2S interface for general purpose use.
  * @param[in] i2s The pointer of the specified I2S module.
  * @param[in] u32MasterSlave I2S operation mode. Valid values are listed below.
  *                                     - \ref SPII2S_MODE_MASTER
  *                                     - \ref SPII2S_MODE_SLAVE
  * @param[in] u32SampleRate Sample rate
  * @param[in] u32WordWidth Data length. Valid values are listed below.
  *                                     - \ref SPII2S_DATABIT_8
  *                                     - \ref SPII2S_DATABIT_16
  *                                     - \ref SPII2S_DATABIT_24
  *                                     - \ref SPII2S_DATABIT_32
  * @param[in] u32Channels Audio format. Valid values are listed below.
  *                                     - \ref SPII2S_MONO
  *                                     - \ref SPII2S_STEREO
  * @param[in] u32DataFormat Data format. Valid values are listed below.
  *                                     - \ref SPII2S_FORMAT_I2S
  *                                     - \ref SPII2S_FORMAT_MSB
  *                                     - \ref SPII2S_FORMAT_PCMA
  *                                     - \ref SPII2S_FORMAT_PCMB
  * @return Real sample rate of master mode or peripheral clock rate of slave mode.
  * @details This function will reset SPI/I2S controller and configure I2S controller according to the input parameters.
  *          Set TX FIFO threshold to 2 and RX FIFO threshold to 1. Both the TX and RX functions will be enabled.
  *          The actual sample rate may be different from the target sample rate. The real sample rate will be returned for reference.
  * @note   In slave mode, the SPI peripheral clock rate will be equal to APB clock rate.
  */
uint32_t SPII2S_Open(SPI_T *i2s, uint32_t u32MasterSlave, uint32_t u32SampleRate, uint32_t u32WordWidth, uint32_t u32Channels, uint32_t u32DataFormat)
{
    uint32_t u32Divider;
    uint32_t u32BitRate, u32SrcClk, u32RetValue;

    /* Reset SPI/I2S */
    if (i2s == SPI0)
    {
        SYS->IPRST1 |= SYS_IPRST1_SPI0RST_Msk;
        SYS->IPRST1 &= ~SYS_IPRST1_SPI0RST_Msk;
    }
    else if (i2s == SPI1)
    {
        SYS->IPRST1 |= SYS_IPRST1_SPI1RST_Msk;
        SYS->IPRST1 &= ~SYS_IPRST1_SPI1RST_Msk;
    }
    else if (i2s == SPI2)
    {
        SYS->IPRST1 |= SYS_IPRST1_SPI2RST_Msk;
        SYS->IPRST1 &= ~SYS_IPRST1_SPI2RST_Msk;
    }
    else
    {
        SYS->IPRST2 |= SYS_IPRST2_SPI3RST_Msk;
        SYS->IPRST2 &= ~SYS_IPRST2_SPI3RST_Msk;
    }

    /* Configure I2S controller */
    i2s->I2SCTL = u32MasterSlave | u32WordWidth | u32Channels | u32DataFormat;
    /* Set TX FIFO threshold to 2 and RX FIFO threshold to 1 */
    SPII2S_SetFIFO(i2s, 2, 1);

    if (u32MasterSlave == SPII2S_MODE_MASTER)
    {
        /* Get the source clock rate */
        u32SrcClk = SPII2S_GetSourceClockFreq(i2s);

        /* Calculate the bit clock rate */
        u32BitRate = u32SampleRate * ((u32WordWidth >> SPI_I2SCTL_WDWIDTH_Pos) + 1U) * 16U;
        u32Divider = ((((u32SrcClk * 10UL / u32BitRate) >> 1U) + 5UL) / 10UL) - 1U; /* Round to the nearest integer */
        /* Set BCLKDIV setting */
        i2s->I2SCLK = (i2s->I2SCLK & ~SPI_I2SCLK_BCLKDIV_Msk) | (u32Divider << SPI_I2SCLK_BCLKDIV_Pos);
        /* Enable I2S mode for the frequency of peripheral clock. */
        i2s->I2SCLK |= SPI_I2SCLK_I2SMODE_Msk;

        /* Calculate bit clock rate */
        u32BitRate = u32SrcClk / ((u32Divider + 1U) * 2U);
        /* Calculate real sample rate */
        u32SampleRate = u32BitRate / (((u32WordWidth >> SPI_I2SCTL_WDWIDTH_Pos) + 1U) * 16U);

        /* Enable TX function, RX function and I2S mode. */
        i2s->I2SCTL |= (SPI_I2SCTL_RXEN_Msk | SPI_I2SCTL_TXEN_Msk | SPI_I2SCTL_I2SEN_Msk);

        /* Return the real sample rate */
        u32RetValue = u32SampleRate;
    }
    else
    {
        /* Set BCLKDIV = 0 */
        i2s->I2SCLK &= ~SPI_I2SCLK_BCLKDIV_Msk;

        if (i2s == SPI0)
        {
            /* Set the peripheral clock rate to equal APB clock rate */
            CLK->CLKSEL2 = (CLK->CLKSEL2 & (~CLK_CLKSEL2_SPI0SEL_Msk)) | CLK_CLKSEL2_SPI0SEL_PCLK1;
            /* Enable I2S slave mode and I2S mode for the frequency of peripheral clock. */
            i2s->I2SCLK |= (SPI_I2SCLK_I2SSLAVE_Msk | SPI_I2SCLK_I2SMODE_Msk);
            /* Enable TX function, RX function and I2S mode. */
            i2s->I2SCTL |= (SPI_I2SCTL_RXEN_Msk | SPI_I2SCTL_TXEN_Msk | SPI_I2SCTL_I2SEN_Msk);
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK1Freq();
        }
        else if (i2s == SPI1)
        {
            /* Set the peripheral clock rate to equal APB clock rate */
            CLK->CLKSEL2 = (CLK->CLKSEL2 & (~CLK_CLKSEL2_SPI1SEL_Msk)) | CLK_CLKSEL2_SPI1SEL_PCLK0;
            /* Enable I2S slave mode and I2S mode for the frequency of peripheral clock. */
            i2s->I2SCLK |= (SPI_I2SCLK_I2SSLAVE_Msk | SPI_I2SCLK_I2SMODE_Msk);
            /* Enable TX function, RX function and I2S mode. */
            i2s->I2SCTL |= (SPI_I2SCTL_RXEN_Msk | SPI_I2SCTL_TXEN_Msk | SPI_I2SCTL_I2SEN_Msk);
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK0Freq();
        }
        else if (i2s == SPI2)
        {
            /* Set the peripheral clock rate to equal APB clock rate */
            CLK->CLKSEL3 = (CLK->CLKSEL3 & (~CLK_CLKSEL3_SPI2SEL_Msk)) | CLK_CLKSEL3_SPI2SEL_PCLK1;
            /* Enable I2S slave mode and I2S mode for the frequency of peripheral clock. */
            i2s->I2SCLK |= (SPI_I2SCLK_I2SSLAVE_Msk | SPI_I2SCLK_I2SMODE_Msk);
            /* Enable TX function, RX function and I2S mode. */
            i2s->I2SCTL |= (SPI_I2SCTL_RXEN_Msk | SPI_I2SCTL_TXEN_Msk | SPI_I2SCTL_I2SEN_Msk);
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK1Freq();
        }
        else
        {
            /* Set the peripheral clock rate to equal APB clock rate */
            CLK->CLKSEL3 = (CLK->CLKSEL3 & (~CLK_CLKSEL3_SPI3SEL_Msk)) | CLK_CLKSEL3_SPI3SEL_PCLK0;
            /* Enable I2S slave mode and I2S mode for the frequency of peripheral clock. */
            i2s->I2SCLK |= (SPI_I2SCLK_I2SSLAVE_Msk | SPI_I2SCLK_I2SMODE_Msk);
            /* Enable TX function, RX function and I2S mode. */
            i2s->I2SCTL |= (SPI_I2SCTL_RXEN_Msk | SPI_I2SCTL_TXEN_Msk | SPI_I2SCTL_I2SEN_Msk);
            /* Return slave peripheral clock rate */
            u32RetValue = CLK_GetPCLK0Freq();
        }
    }

    return u32RetValue;
}

/**
  * @brief  Disable I2S function.
  * @param[in]  i2s The pointer of the specified I2S module.
  * @return None
  * @details Disable I2S function.
  */
void SPII2S_Close(SPI_T *i2s)
{
    i2s->I2SCTL &= ~SPI_I2SCTL_I2SEN_Msk;
}

/**
  * @brief Enable interrupt function.
  * @param[in] i2s The pointer of the specified I2S module.
  * @param[in] u32Mask The combination of all related interrupt enable bits.
  *            Each bit corresponds to a interrupt source. Valid values are listed below.
  *            - \ref SPII2S_FIFO_TXTH_INT_MASK
  *            - \ref SPII2S_FIFO_RXTH_INT_MASK
  *            - \ref SPII2S_FIFO_RXOV_INT_MASK
  *            - \ref SPII2S_FIFO_RXTO_INT_MASK
  *            - \ref SPII2S_TXUF_INT_MASK
  *            - \ref SPII2S_RIGHT_ZC_INT_MASK
  *            - \ref SPII2S_LEFT_ZC_INT_MASK
  *            - \ref SPII2S_SLAVE_ERR_INT_MASK
  * @return None
  * @details This function enables the interrupt according to the u32Mask parameter.
  */
void SPII2S_EnableInt(SPI_T *i2s, uint32_t u32Mask)
{
    /* Enable TX threshold interrupt flag */
    if ((u32Mask & SPII2S_FIFO_TXTH_INT_MASK) == SPII2S_FIFO_TXTH_INT_MASK)
    {
        i2s->FIFOCTL |= SPI_FIFOCTL_TXTHIEN_Msk;
    }

    /* Enable RX threshold interrupt flag */
    if ((u32Mask & SPII2S_FIFO_RXTH_INT_MASK) == SPII2S_FIFO_RXTH_INT_MASK)
    {
        i2s->FIFOCTL |= SPI_FIFOCTL_RXTHIEN_Msk;
    }

    /* Enable RX overrun interrupt flag */
    if ((u32Mask & SPII2S_FIFO_RXOV_INT_MASK) == SPII2S_FIFO_RXOV_INT_MASK)
    {
        i2s->FIFOCTL |= SPI_FIFOCTL_RXOVIEN_Msk;
    }

    /* Enable RX time-out interrupt flag */
    if ((u32Mask & SPII2S_FIFO_RXTO_INT_MASK) == SPII2S_FIFO_RXTO_INT_MASK)
    {
        i2s->FIFOCTL |= SPI_FIFOCTL_RXTOIEN_Msk;
    }

    /* Enable TX underflow interrupt flag */
    if ((u32Mask & SPII2S_TXUF_INT_MASK) == SPII2S_TXUF_INT_MASK)
    {
        i2s->FIFOCTL |= SPI_FIFOCTL_TXUFIEN_Msk;
    }

    /* Enable right channel zero cross interrupt flag */
    if ((u32Mask & SPII2S_RIGHT_ZC_INT_MASK) == SPII2S_RIGHT_ZC_INT_MASK)
    {
        i2s->I2SCTL |= SPI_I2SCTL_RZCIEN_Msk;
    }

    /* Enable left channel zero cross interrupt flag */
    if ((u32Mask & SPII2S_LEFT_ZC_INT_MASK) == SPII2S_LEFT_ZC_INT_MASK)
    {
        i2s->I2SCTL |= SPI_I2SCTL_LZCIEN_Msk;
    }
    /* Enable bit clock loss interrupt flag */
    if ((u32Mask & SPII2S_SLAVE_ERR_INT_MASK) == SPII2S_SLAVE_ERR_INT_MASK)
    {
        i2s->I2SCTL |= SPI_I2SCTL_SLVERRIEN_Msk;
    }
}

/**
  * @brief Disable interrupt function.
  * @param[in] i2s The pointer of the specified I2S module.
  * @param[in] u32Mask The combination of all related interrupt enable bits.
  *            Each bit corresponds to a interrupt source. Valid values are listed below.
  *            - \ref SPII2S_FIFO_TXTH_INT_MASK
  *            - \ref SPII2S_FIFO_RXTH_INT_MASK
  *            - \ref SPII2S_FIFO_RXOV_INT_MASK
  *            - \ref SPII2S_FIFO_RXTO_INT_MASK
  *            - \ref SPII2S_TXUF_INT_MASK
  *            - \ref SPII2S_RIGHT_ZC_INT_MASK
  *            - \ref SPII2S_LEFT_ZC_INT_MASK
  *            - \ref SPII2S_SLAVE_ERR_INT_MASK
  * @return None
  * @details This function disables the interrupt according to the u32Mask parameter.
  */
void SPII2S_DisableInt(SPI_T *i2s, uint32_t u32Mask)
{
    /* Disable TX threshold interrupt flag */
    if ((u32Mask & SPII2S_FIFO_TXTH_INT_MASK) == SPII2S_FIFO_TXTH_INT_MASK)
    {
        i2s->FIFOCTL &= ~SPI_FIFOCTL_TXTHIEN_Msk;
    }

    /* Disable RX threshold interrupt flag */
    if ((u32Mask & SPII2S_FIFO_RXTH_INT_MASK) == SPII2S_FIFO_RXTH_INT_MASK)
    {
        i2s->FIFOCTL &= ~SPI_FIFOCTL_RXTHIEN_Msk;
    }

    /* Disable RX overrun interrupt flag */
    if ((u32Mask & SPII2S_FIFO_RXOV_INT_MASK) == SPII2S_FIFO_RXOV_INT_MASK)
    {
        i2s->FIFOCTL &= ~SPI_FIFOCTL_RXOVIEN_Msk;
    }

    /* Disable RX time-out interrupt flag */
    if ((u32Mask & SPII2S_FIFO_RXTO_INT_MASK) == SPII2S_FIFO_RXTO_INT_MASK)
    {
        i2s->FIFOCTL &= ~SPI_FIFOCTL_RXTOIEN_Msk;
    }

    /* Disable TX underflow interrupt flag */
    if ((u32Mask & SPII2S_TXUF_INT_MASK) == SPII2S_TXUF_INT_MASK)
    {
        i2s->FIFOCTL &= ~SPI_FIFOCTL_TXUFIEN_Msk;
    }

    /* Disable right channel zero cross interrupt flag */
    if ((u32Mask & SPII2S_RIGHT_ZC_INT_MASK) == SPII2S_RIGHT_ZC_INT_MASK)
    {
        i2s->I2SCTL &= ~SPI_I2SCTL_RZCIEN_Msk;
    }

    /* Disable left channel zero cross interrupt flag */
    if ((u32Mask & SPII2S_LEFT_ZC_INT_MASK) == SPII2S_LEFT_ZC_INT_MASK)
    {
        i2s->I2SCTL &= ~SPI_I2SCTL_LZCIEN_Msk;
    }
    /* Disable bit clock loss interrupt flag */
    if ((u32Mask & SPII2S_SLAVE_ERR_INT_MASK) == SPII2S_SLAVE_ERR_INT_MASK)
    {
        i2s->I2SCTL &= ~SPI_I2SCTL_SLVERRIEN_Msk;
    }
}

/**
  * @brief  Enable master clock (MCLK).
  * @param[in] i2s The pointer of the specified I2S module.
  * @param[in] u32BusClock The target MCLK clock rate.
  * @return Actual MCLK clock rate
  * @details Set the master clock rate according to u32BusClock parameter and enable master clock output.
  *          The actual master clock rate may be different from the target master clock rate. The real master clock rate will be returned for reference.
  */
uint32_t SPII2S_EnableMCLK(SPI_T *i2s, uint32_t u32BusClock)
{
    uint32_t u32Divider;
    uint32_t u32SrcClk, u32RetValue;

    u32SrcClk = SPII2S_GetSourceClockFreq(i2s);
    if (u32BusClock == u32SrcClk)
    {
        u32Divider = 0U;
    }
    else
    {
        u32Divider = (u32SrcClk / u32BusClock) >> 1U;
        /* MCLKDIV is a 7-bit width configuration. The maximum value is 0x7F. */
        if (u32Divider > 0x7FU)
        {
            u32Divider = 0x7FU;
        }
    }

    /* Write u32Divider to MCLKDIV (SPI_I2SCLK[6:0]) */
    i2s->I2SCLK = (i2s->I2SCLK & ~SPI_I2SCLK_MCLKDIV_Msk) | (u32Divider << SPI_I2SCLK_MCLKDIV_Pos);

    /* Enable MCLK output */
    i2s->I2SCTL |= SPI_I2SCTL_MCLKEN_Msk;

    if (u32Divider == 0U)
    {
        u32RetValue = u32SrcClk; /* If MCLKDIV=0, master clock rate is equal to the source clock rate. */
    }
    else
    {
        u32RetValue = ((u32SrcClk >> 1U) / u32Divider); /* If MCLKDIV>0, master clock rate = source clock rate / (MCLKDIV * 2) */
    }

    return u32RetValue;
}

/**
  * @brief  Disable master clock (MCLK).
  * @param[in] i2s The pointer of the specified I2S module.
  * @return None
  * @details Clear MCLKEN bit of SPI_I2SCTL register to disable master clock output.
  */
void SPII2S_DisableMCLK(SPI_T *i2s)
{
    i2s->I2SCTL &= ~SPI_I2SCTL_MCLKEN_Msk;
}

/**
  * @brief  Configure FIFO threshold setting.
  * @param[in]  i2s The pointer of the specified I2S module.
  * @param[in]  u32TxThreshold Decides the TX FIFO threshold. It could be 0 ~ 3.
  * @param[in]  u32RxThreshold Decides the RX FIFO threshold. It could be 0 ~ 3.
  * @return None
  * @details Set TX FIFO threshold and RX FIFO threshold configurations.
  */
void SPII2S_SetFIFO(SPI_T *i2s, uint32_t u32TxThreshold, uint32_t u32RxThreshold)
{
    i2s->FIFOCTL = (i2s->FIFOCTL & ~(SPI_FIFOCTL_TXTH_Msk | SPI_FIFOCTL_RXTH_Msk)) |
                   (u32TxThreshold << SPI_FIFOCTL_TXTH_Pos) |
                   (u32RxThreshold << SPI_FIFOCTL_RXTH_Pos);
}

/*@}*/ /* end of group SPI_EXPORTED_FUNCTIONS */

/*@}*/ /* end of group SPI_Driver */

/*@}*/ /* end of group Standard_Driver */