path: root/bsp/nuvoton_m451/Libraries/StdDriver/src/fmc.c

/**************************************************************************//**
 * @file     fmc.c
 * @version  V3.00
 * $Revision: 7 $
 * $Date: 15/08/11 10:26a $
 * @brief    M451 series FMC driver source file
 *
 * @note
 * Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved.
 *****************************************************************************/

//* Includes ------------------------------------------------------------------*/
#include <stdio.h>
#include "M451Series.h"

/** @addtogroup Standard_Driver Standard Driver
  @{
*/

/** @addtogroup FMC_Driver FMC Driver
  @{
*/


/** @addtogroup FMC_EXPORTED_FUNCTIONS FMC Exported Functions
  @{
*/


/**
  * @brief      Set boot source from LDROM or APROM after next software reset
  *
  * @param[in]  i32BootSrc
  *                         1: Boot from LDROM,
  *                         0: Boot from APROM
  *
  * @return   None
  *
  * @details  This function is used to switch APROM boot or LDROM boot. User need to call
  *           FMC_SetBootSource to select boot source first, then use CPU reset or
  *           System Reset Request to reset system.
  *
  */
void FMC_SetBootSource(int32_t i32BootSrc)
{
    if(i32BootSrc)
        FMC->ISPCTL |= FMC_ISPCTL_BS_Msk; /* Boot from LDROM */
    else
        FMC->ISPCTL &= ~FMC_ISPCTL_BS_Msk;/* Boot from APROM */
}


/**
  * @brief    Disable ISP Functions
  *
  * @param    None
  *
  * @return   None
  *
  * @details  This function will clear ISPEN bit of ISPCTL to disable ISP function
  *
  */
void FMC_Close(void)
{
    FMC->ISPCTL &= ~FMC_ISPCTL_ISPEN_Msk;
}


/**
  * @brief    Disable APROM update function
  *
  * @param    None
  *
  * @return   None
  *
  * @details  Disable APROM update function will forbid APROM programming when boot form APROM.
  *           APROM update is default to be disable.
  *
  */
void FMC_DisableAPUpdate(void)
{
    FMC->ISPCTL &= ~FMC_ISPCTL_APUEN_Msk;
}


/**
  * @brief    Disable User Configuration update function
  *
  * @param    None
  *
  * @return   None
  *
  * @details  Disable User Configuration update function will forbid User Configuration programming.
  *           User Configuration update is default to be disable.
  */
void FMC_DisableConfigUpdate(void)
{
    FMC->ISPCTL &= ~FMC_ISPCTL_CFGUEN_Msk;
}


/**
  * @brief    Disable LDROM update function
  *
  * @param    None
  *
  * @return   None

  * @details  Disable LDROM update function will forbid LDROM programming.
  *           LDROM update is default to be disable.
  */
void FMC_DisableLDUpdate(void)
{
    FMC->ISPCTL &= ~FMC_ISPCTL_LDUEN_Msk;
}


/**
  * @brief    Enable APROM update function
  *
  * @param    None
  *
  * @return   None
  *
  * @details  Enable APROM to be able to program when boot from APROM.
  *
  */
void FMC_EnableAPUpdate(void)
{
    FMC->ISPCTL |= FMC_ISPCTL_APUEN_Msk;
}


/**
  * @brief    Enable User Configuration update function
  *
  * @param    None
  *
  * @return   None
  *
  * @details  Enable User Configuration to be able to program.
  *
  */
void FMC_EnableConfigUpdate(void)
{
    FMC->ISPCTL |= FMC_ISPCTL_CFGUEN_Msk;
}


/**
  * @brief    Enable LDROM update function
  *
  * @param    None
  *
  * @return   None
  *
  * @details  Enable LDROM to be able to program.
  *
  */
void FMC_EnableLDUpdate(void)
{
    FMC->ISPCTL |= FMC_ISPCTL_LDUEN_Msk;
}


/**
  * @brief    Get the current boot source
  *
  * @param    None
  *
  * @retval   0 This chip is currently booting from APROM
  * @retval   1 This chip is currently booting from LDROM
  *
  * @note     This function only show the boot source.
  *           User need to read ISPSTA register to know if IAP mode supported or not in relative boot.
  */
int32_t FMC_GetBootSource(void)
{
    if(FMC->ISPCTL & FMC_ISPCTL_BS_Msk)
        return 1;
    else
        return 0;
}


/**
  * @brief    Enable FMC ISP function
  *
  * @param    None
  *
  * @return   None
  *
  * @details  ISPEN bit of ISPCTL must be set before we can use ISP commands.
  *           Therefore, To use all FMC function APIs, user needs to call FMC_Open() first to enable ISP functions.
  *
  * @note     ISP functions are write-protected. user also needs to unlock it by calling SYS_UnlockReg() before using all ISP functions.
  *
  */
void FMC_Open(void)
{
    FMC->ISPCTL |=  FMC_ISPCTL_ISPEN_Msk;
}

/**
  * @brief    Get the base address of Data Flash if enabled.
  *
  * @param    None
  *
  * @return   The base address of Data Flash
  *
  * @details  This function is used to return the base address of Data Flash.
  *
  */
uint32_t FMC_ReadDataFlashBaseAddr(void)
{
    return FMC->DFBA;
}


/**
  * @brief       Read the User Configuration words.
  *
  * @param[out]  u32Config  The word buffer to store the User Configuration data.
  * @param[in]   u32Count   The word count to be read.
  *
  * @retval       0 Success
  * @retval      -1 Failed
  *
  * @details     This function is used to read the settings of user configuration.
  *              if u32Count = 1, Only CONFIG0 will be returned to the buffer specified by u32Config.
  *              if u32Count = 2, Both CONFIG0 and CONFIG1 will be returned.
  */
int32_t FMC_ReadConfig(uint32_t *u32Config, uint32_t u32Count)
{
    int32_t i;

    for(i = 0; i < u32Count; i++)
        u32Config[i] = FMC_Read(FMC_CONFIG_BASE + i * 4);

    return 0;
}


/**
  * @brief      Write User Configuration
  *
  * @param[in]  u32Config The word buffer to store the User Configuration data.
  * @param[in]  u32Count The word count to program to User Configuration.
  *
  * @retval     0 Success
  * @retval    -1 Failed
  *
  * @details    User must enable User Configuration update before writing it.
  *             User must erase User Configuration before writing it.
  *             User Configuration is also be page erase. User needs to backup necessary data
  *             before erase User Configuration.
  */
int32_t FMC_WriteConfig(uint32_t *u32Config, uint32_t u32Count)
{
    int32_t i;

    for(i = 0; i < u32Count; i++)
    {
        FMC_Write(FMC_CONFIG_BASE + i * 4, u32Config[i]);
        if(FMC_Read(FMC_CONFIG_BASE + i * 4) != u32Config[i])
            return -1;
    }

    return 0;
}

/**
 * @brief      Enable Flash Access Frequency  Optimization Mode
 *
 * @param[in]  u32Mode   Optimize flash access cycle mode
 *             - \ref FMC_FTCTL_OPTIMIZE_DISABLE
 *             - \ref FMC_FTCTL_OPTIMIZE_12MHZ
 *             - \ref FMC_FTCTL_OPTIMIZE_36MHZ
 *             - \ref FMC_FTCTL_OPTIMIZE_60MHZ
 *             - \ref FMC_FTCTL_OPTIMIZE_72MHZ
 *
 * @return     None
 *
 * @details    This function will set FOM bit fields of FTCTL register to set flash access frequency optimization mode.
 *
 * @note       The flash optimization mode (FOM) bits are write protect.
 *
 */
void FMC_EnableFreqOptimizeMode(uint32_t u32Mode)
{
    FMC->FTCTL &= ~FMC_FTCTL_FOM_Msk;
    FMC->FTCTL |= (u32Mode << FMC_FTCTL_FOM_Pos);
}

/**
 * @brief      Disable Flash Access Frequency  Optimization Mode
 *
 * @param      None
 *
 * @return     None
 *
 * @details    This function will clear FOM bit fields of FTCTL register to disable flash access frequency optimization mode.
 *
 * @note       The flash optimization mode (FOM) bits are write protect.
 *
 */
void FMC_DisableFreqOptimizeMode(void)
{
    FMC->FTCTL &= ~FMC_FTCTL_FOM_Msk;
}

/*@}*/ /* end of group FMC_EXPORTED_FUNCTIONS */

/*@}*/ /* end of group FMC_Driver */

/*@}*/ /* end of group Standard_Driver */

/*** (C) COPYRIGHT 2014~2015 Nuvoton Technology Corp. ***/