1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
|
/**************************************************************************//**
* @file uart.c
* @version V1.00
* $Revision: 14 $
* $Date: 15/11/26 10:47a $
* @brief NUC472/NUC442 UART driver source file
*
* @note
* Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#include <stdio.h>
#include "NUC472_442.h"
/*---------------------------------------------------------------------------------------------------------*/
/* Includes of local headers */
/*---------------------------------------------------------------------------------------------------------*/
/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver
@{
*/
/** @addtogroup NUC472_442_UART_Driver UART Driver
@{
*/
/** @addtogroup NUC472_442_UART_EXPORTED_FUNCTIONS UART Exported Functions
@{
*/
/**
* @brief The function is used to clear UART specified interrupt flag.
*
* @param[in] uart The base address of UART module.
* @param[in] u32InterruptFlag The specified interrupt of UART module..
*
* @return None
*/
void UART_ClearIntFlag(UART_T* uart , uint32_t u32InterruptFlag)
{
if(u32InterruptFlag & UART_INTSTS_RLSINT_Msk) { /* clear Receive Line Status Interrupt */
uart->FIFOSTS |= UART_FIFOSTS_BIF_Msk | UART_FIFOSTS_FEF_Msk | UART_FIFOSTS_PEF_Msk;
uart->FIFOSTS |= UART_FIFOSTS_ADDRDETF_Msk;
}
if(u32InterruptFlag & UART_INTSTS_MODEMINT_Msk) /* clear Modem Interrupt */
uart->MODEMSTS |= UART_MODEMSTS_CTSDETF_Msk;
if(u32InterruptFlag & UART_INTSTS_BUFERRINT_Msk) { /* clear Buffer Error Interrupt */
uart->FIFOSTS |= UART_FIFOSTS_RXOVIF_Msk | UART_FIFOSTS_TXOVIF_Msk;
}
if(u32InterruptFlag & UART_INTSTS_RXTOINT_Msk) /* clear Modem Interrupt */
uart->INTSTS |= UART_INTSTS_RXTOIF_Msk;
}
/**
* @brief The function is used to disable UART.
*
* @param[in] uart The base address of UART module.
*
* @return None
*/
void UART_Close(UART_T* uart)
{
uart->INTEN = 0;
}
/**
* @brief The function is used to disable UART auto flow control.
*
* @param[in] uart The base address of UART module.
*
* @return None
*/
void UART_DisableFlowCtrl(UART_T* uart)
{
uart->INTEN &= ~(UART_INTEN_ATORTSEN_Msk | UART_INTEN_ATOCTSEN_Msk);
}
/**
* @brief The function is used to disable UART specified interrupt and disable NVIC UART IRQ.
*
* @param[in] uart The base address of UART module.
* @param[in] u32InterruptFlag The specified interrupt of UART module.
* - \ref UART_INTEN_TOCNTEN_Msk : Rx Time Out interrupt
* - \ref UART_INTEN_WKCTSIEN_Msk : Wakeup interrupt
* - \ref UART_INTEN_BUFERRIEN_Msk : Buffer Error interrupt
* - \ref UART_INTEN_RXTOIEN_Msk : Rx time-out interrupt
* - \ref UART_INTEN_MODEMIEN_Msk : Modem interrupt
* - \ref UART_INTEN_RLSIEN_Msk : Rx Line status interrupt
* - \ref UART_INTEN_THREIEN_Msk : Tx empty interrupt
* - \ref UART_INTEN_RDAIEN_Msk : Rx ready interrupt
*
* @return None
*/
void UART_DisableInt(UART_T* uart, uint32_t u32InterruptFlag )
{
uart->INTEN &= ~ u32InterruptFlag;
}
/**
* @brief The function is used to Enable UART auto flow control.
*
* @param[in] uart The base address of UART module.
*
* @return None
*/
void UART_EnableFlowCtrl(UART_T* uart )
{
uart->MODEM |= UART_MODEM_RTSACTLV_Msk;
uart->MODEM &= ~UART_MODEM_RTS_Msk;
uart->MODEMSTS |= UART_MODEMSTS_CTSACTLV_Msk;
uart->INTEN |= UART_INTEN_ATORTSEN_Msk | UART_INTEN_ATOCTSEN_Msk;
}
/**
* @brief The function is used to enable UART specified interrupt and disable NVIC UART IRQ.
*
* @param[in] uart The base address of UART module.
* @param[in] u32InterruptFlag The specified interrupt of UART module:
* - \ref UART_INTEN_TOCNTEN_Msk : Rx Time Out interrupt
* - \ref UART_INTEN_WKCTSIEN_Msk : Wakeup interrupt
* - \ref UART_INTEN_BUFERRIEN_Msk : Buffer Error interrupt
* - \ref UART_INTEN_RXTOIEN_Msk : Rx time-out interrupt
* - \ref UART_INTEN_MODEMIEN_Msk : Modem interrupt
* - \ref UART_INTEN_RLSIEN_Msk : Rx Line status interrupt
* - \ref UART_INTEN_THREIEN_Msk : Tx empty interrupt
* - \ref UART_INTEN_RDAIEN_Msk : Rx ready interrupt
*
* @return None
*/
void UART_EnableInt(UART_T* uart, uint32_t u32InterruptFlag )
{
uart->INTEN |= u32InterruptFlag;
}
/**
* @brief This function use to enable UART function and set baud-rate.
*
* @param[in] uart The base address of UART module.
* @param[in] u32baudrate The baudrate of UART module.
*
* @return None
*/
void UART_Open(UART_T* uart, uint32_t u32baudrate)
{
uint8_t u8UartClkSrcSel;
uint32_t u32ClkTbl[4] = {__HXT, 0, __HIRC, __HIRC};
uint32_t u32Clk;
uint32_t u32Baud_Div;
u32ClkTbl[1] = CLK_GetPLLClockFreq();
u8UartClkSrcSel = (CLK->CLKSEL1 & CLK_CLKSEL1_UARTSEL_Msk) >> CLK_CLKSEL1_UARTSEL_Pos;
uart->FUNCSEL = UART_FUNCSEL_UART;
uart->LINE = UART_WORD_LEN_8 | UART_PARITY_NONE | UART_STOP_BIT_1;
uart->FIFO = UART_FIFO_RFITL_1BYTE | UART_FIFO_RTSTRGLV_1BYTE;
u32Clk = (u32ClkTbl[u8UartClkSrcSel]) / (((CLK->CLKDIV0 & CLK_CLKDIV0_UARTDIV_Msk) >> CLK_CLKDIV0_UARTDIV_Pos) + 1);
if(u32baudrate != 0) {
u32Baud_Div = UART_BAUD_MODE2_DIVIDER(u32Clk, u32baudrate);
if(u32Baud_Div > 0xFFFF)
uart->BAUD = (UART_BAUD_MODE0 | UART_BAUD_MODE0_DIVIDER(u32Clk, u32baudrate));
else
uart->BAUD = (UART_BAUD_MODE2 | u32Baud_Div);
}
}
/**
* @brief The function is used to read Rx data from RX FIFO and the data will be stored in pu8RxBuf.
*
* @param[in] uart The base address of UART module.
* @param[out] pu8RxBuf The buffer to receive the data of receive FIFO.
* @param[in] u32ReadBytes The the read bytes number of data.
*
* @return u32Count: Receive byte count
*
*/
uint32_t UART_Read(UART_T* uart, uint8_t *pu8RxBuf, uint32_t u32ReadBytes)
{
uint32_t u32Count;
for(u32Count=0; u32Count < u32ReadBytes; u32Count++) {
if(uart->FIFOSTS & UART_FIFOSTS_RXEMPTY_Msk) { /* Check RX empty => failed */
return u32Count;
}
pu8RxBuf[u32Count] = uart->DAT; /* Get Data from UART RX */
}
return u32Count;
}
/**
* @brief This function use to config UART line setting.
*
* @param[in] uart The base address of UART module.
* @param[in] u32baudrate The register value of baudrate of UART module.
* if u32baudrate = 0, UART baudrate will not change.
* @param[in] u32data_width The data length of UART module. [ \ref UART_WORD_LEN_5 / \ref UART_WORD_LEN_6 / \ref UART_WORD_LEN_7 / \ref UART_WORD_LEN_8]
* @param[in] u32parity The parity setting (odd/even/none) of UART module. [ \ref UART_PARITY_NONE / \ref UART_PARITY_ODD /
* \ref UART_PARITY_EVEN / \ref UART_PARITY_MARK / \ref UART_PARITY_SPACE]
* @param[in] u32stop_bits The stop bit length (1/1.5/2 bit) of UART module. [ \ref UART_STOP_BIT_1 / \ref UART_STOP_BIT_1_5 / \ref UART_STOP_BIT_2]
*
* @return None
*/
void UART_SetLine_Config(UART_T* uart, uint32_t u32baudrate, uint32_t u32data_width, uint32_t u32parity, uint32_t u32stop_bits)
{
uint8_t u8UartClkSrcSel;
uint32_t u32ClkTbl[4] = {__HXT, 0, __HIRC, __HIRC};
uint32_t u32Clk;
uint32_t u32Baud_Div = 0;
u32ClkTbl[1] = CLK_GetPLLClockFreq();
u8UartClkSrcSel = (CLK->CLKSEL1 & CLK_CLKSEL1_UARTSEL_Msk) >> CLK_CLKSEL1_UARTSEL_Pos;
u32Clk = (u32ClkTbl[u8UartClkSrcSel]) / (((CLK->CLKDIV0 & CLK_CLKDIV0_UARTDIV_Msk) >> CLK_CLKDIV0_UARTDIV_Pos) + 1);
if(u32baudrate != 0) {
u32Baud_Div = UART_BAUD_MODE2_DIVIDER(u32Clk, u32baudrate);
if(u32Baud_Div > 0xFFFF)
uart->BAUD = (UART_BAUD_MODE0 | UART_BAUD_MODE0_DIVIDER(u32Clk, u32baudrate));
else
uart->BAUD = (UART_BAUD_MODE2 | u32Baud_Div);
}
uart->LINE = u32data_width | u32parity | u32stop_bits;
}
/**
* @brief This function use to set Rx timeout count.
*
* @param[in] uart The base address of UART module.
* @param[in] u32TOC Rx timeout counter.
*
* @return None
*/
void UART_SetTimeoutCnt(UART_T* uart, uint32_t u32TOC)
{
uart->TOUT = (uart->TOUT & ~UART_TOUT_TOIC_Msk)| (u32TOC);
uart->INTEN |= UART_INTEN_TOCNTEN_Msk;
}
/**
* @brief The function is used to configure IrDA relative settings. It consists of TX or RX mode and baudrate.
*
* @param[in] uart The base address of UART module.
* @param[in] u32Buadrate The baudrate of UART module.
* @param[in] u32Direction The direction(transmit:1/receive:0) of UART module in IrDA mode.
*
* @return None
*/
void UART_SelectIrDAMode(UART_T* uart, uint32_t u32Buadrate, uint32_t u32Direction)
{
uint8_t u8UartClkSrcSel;
uint32_t u32ClkTbl[4] = {__HXT, 0, __HIRC, __HIRC};
uint32_t u32Clk;
u32ClkTbl[1] = CLK_GetPLLClockFreq();
u8UartClkSrcSel = (CLK->CLKSEL1 & CLK_CLKSEL1_UARTSEL_Msk) >> CLK_CLKSEL1_UARTSEL_Pos;
u32Clk = (u32ClkTbl[u8UartClkSrcSel]) / (((CLK->CLKDIV0 & CLK_CLKDIV0_UARTDIV_Msk) >> CLK_CLKDIV0_UARTDIV_Pos) + 1);
uart->BAUD = UART_BAUD_MODE0 | UART_BAUD_MODE0_DIVIDER(u32Clk, u32Buadrate);
uart->IRDA &= ~UART_IRDA_TXINV_Msk;
uart->IRDA |= UART_IRDA_RXINV_Msk;
uart->IRDA = u32Direction ? uart->IRDA | UART_IRDA_TXEN_Msk : uart->IRDA &~ UART_IRDA_TXEN_Msk;
uart->FUNCSEL = (0x2 << UART_FUNCSEL_FUNCSEL_Pos);
}
/**
* @brief The function is used to set RS485 relative setting.
*
* @param[in] uart The base address of UART module.
* @param[in] u32Mode The operation mode( \ref UART_ALTCTL_RS485NMM_Msk / \ref UART_ALTCTL_RS485AUD_Msk / \ref UART_ALTCTL_RS485AAD_Msk).
* @param[in] u32Addr The RS485 address.
*
* @return None
*/
void UART_SelectRS485Mode(UART_T* uart, uint32_t u32Mode, uint32_t u32Addr)
{
uart->FUNCSEL = UART_FUNCSEL_RS485;
uart->ALTCTL = 0;
uart->ALTCTL |= u32Mode | (u32Addr << UART_ALTCTL_ADDRMV_Pos);
}
/**
* @brief The function is to write data into TX buffer to transmit data by UART.
*
* @param[in] uart The base address of UART module.
* @param[in] pu8TxBuf The buffer to send the data to UART transmission FIFO.
* @param[in] u32WriteBytes The byte number of data.
*
* @return u32Count: transfer byte count
*/
uint32_t UART_Write(UART_T* uart,uint8_t *pu8TxBuf, uint32_t u32WriteBytes)
{
uint32_t u32Count;
for(u32Count=0; u32Count != u32WriteBytes; u32Count++) {
if(uart->FIFOSTS & UART_FIFOSTS_TXFULL_Msk) { /* Wait Tx empty and Time-out manner */
return u32Count;
}
uart->DAT = pu8TxBuf[u32Count]; /* Send UART Data from buffer */
}
return u32Count;
}
/*@}*/ /* end of group NUC472_442_UART_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group NUC472_442_UART_Driver */
/*@}*/ /* end of group NUC472_442_Device_Driver */
/*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/
|
