1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
|
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-10-03 xuzhuoyi first implementation.
*/
#include "drv_touch.h"
#include "drivers/i2c.h"
#ifdef PKG_USING_LITTLEVGL2RTT
#include "littlevgl2rtt.h"
#endif
#define TSC_I2C_ADDR 0x41 /* 7-bit I2C address */
static struct rt_i2c_bus_device *stmpe811_i2c_bus;
/**
\fn int32_t touch_readRegister (uint8_t reg, uint8_t *val)
\brief Read register value from Touchscreen controller
\param[in] reg Register address
\param[out] val Pointer where data will be read from register
\returns
- \b 0: function succeeded
- \b -1: function failed
*/
static int32_t touch_read (uint8_t reg, uint8_t *val)
{
struct rt_i2c_msg msgs[2];
msgs[0].addr = TSC_I2C_ADDR;
msgs[0].flags = RT_I2C_WR;
msgs[0].buf = ®
msgs[0].len = 1;
msgs[1].addr = TSC_I2C_ADDR;
msgs[1].flags = RT_I2C_RD;
msgs[1].buf = val;
msgs[1].len = 1;
if (rt_i2c_transfer(stmpe811_i2c_bus, msgs, 2) == 2)
{
return RT_EOK;
}
else
{
return -RT_ERROR;
}
}
/**
\fn int32_t touch_writeData (uint8_t reg, const uint8_t *val)
\brief Write value to Touchscreen controller register
\param[in] reg Register address
\param[in] val Pointer with data to write to register
\returns
- \b 0: function succeeded
- \b -1: function failed
*/
static int32_t touch_write(uint8_t reg, uint8_t val)
{
struct rt_i2c_msg msgs;
rt_uint8_t buf[2] = {reg, val};
msgs.addr = TSC_I2C_ADDR;
msgs.flags = RT_I2C_WR;
msgs.buf = buf;
msgs.len = 2;
if (rt_i2c_transfer(stmpe811_i2c_bus, &msgs, 1) == 1)
{
return RT_EOK;
}
else
{
return -RT_ERROR;
}
}
/**
\fn int32_t Touch_Initialize (void)
\brief Initialize touchscreen
\returns
- \b 0: function succeeded
- \b -1: function failed
*/
static rt_err_t stmpe811_touch_init(rt_device_t dev)
{
stmpe811_i2c_bus = rt_i2c_bus_device_find("i2c3");
touch_write(STMPE811_SYS_CTRL1, 0x02); /* Reset Touch-screen controller */
rt_thread_mdelay(10); /* Wait 10ms */
touch_write(STMPE811_SYS_CTRL2, 0x0C); /* Enable TSC and ADC */
touch_write(STMPE811_ADC_CTRL1, 0x68); /* Set sample time , 12-bit mode */
rt_thread_mdelay(1); /* Wait 1ms */
touch_write(STMPE811_ADC_CTRL2, 0x01); /* ADC frequency 3.25 MHz */
touch_write(STMPE811_TSC_CFG, 0xC2); /* Detect delay 10us,
Settle time 500us */
touch_write(STMPE811_FIFO_TH, 0x01); /* Threshold for FIFO */
touch_write(STMPE811_FIFO_STA, 0x01); /* FIFO reset */
touch_write(STMPE811_FIFO_STA, 0x00); /* FIFO not reset */
touch_write(STMPE811_TSC_FRACTION_Z, 0x07); /* Fraction z */
touch_write(STMPE811_TSC_I_DRIVE, 0x01); /* Drive 50 mA typical */
touch_write(STMPE811_GPIO_AF, 0x00); /* Pins are used for touchscreen */
touch_write(STMPE811_TSC_CTRL, 0x01); /* Enable TSC */
return 0;
}
/**
\fn int32_t Touch_Uninitialize (void)
\brief De-initialize touchscreen
\returns
- \b 0: function succeeded
- \b -1: function failed
*/
int32_t touch_uninitialize (void) {
touch_write(STMPE811_SYS_CTRL1, 0x02); /* Reset Touch-screen controller */
return 0;
}
/**
\fn int32_t Touch_GetState (TOUCH_STATE *pState)
\brief Get touchscreen state
\param[out] pState pointer to TOUCH_STATE structure
\returns
- \b 0: function succeeded
- \b -1: function failed
*/
int32_t touch_get_state(struct touch_state *state)
{
uint8_t val;
uint8_t num;
uint8_t xyz[4];
int32_t res;
struct rt_i2c_msg msgs[2];
/* Read touch status */
res = touch_read(STMPE811_TSC_CTRL, &val);
if (res < 0) return -1;
state->pressed = (val & (1 << 7)) ? 1 : 0;
if (state->pressed)
{
val = STMPE811_TSC_DATA;
/* If FIFO overflow, discard all samples except the last one */
res = touch_read(STMPE811_FIFO_SIZE, &num);
if (res < 0 || num == 0) return -1;
while (num--)
{
msgs[0].addr = TSC_I2C_ADDR;
msgs[0].flags = RT_I2C_WR;
msgs[0].buf = &val;
msgs[0].len = 1;
//rt_i2c_transfer(stmpe811_i2c_bus, &msgs, 1);
//ptrI2C->MasterTransmit (TSC_I2C_ADDR, &val, 1, true);
//while (ptrI2C->GetStatus().busy);
msgs[1].addr = TSC_I2C_ADDR;
msgs[1].flags = RT_I2C_RD;
msgs[1].buf = xyz;
msgs[1].len = 4;
rt_i2c_transfer(stmpe811_i2c_bus, msgs, 2);
//ptrI2C->MasterReceive (TSC_I2C_ADDR, xyz, 4, false);
//while (ptrI2C->GetStatus().busy);
}
state->x = (int16_t)((xyz[0] << 4) | ((xyz[1] & 0xF0) >> 4));
state->y = (int16_t) (xyz[2] | ((xyz[1] & 0x0F) << 8));
}
else
{
/* Clear all data in FIFO */
touch_write(STMPE811_FIFO_STA, 0x1);
touch_write(STMPE811_FIFO_STA, 0x0);
}
return 0;
}
void touch_show_state()
{
int16_t x;
int16_t y;
struct touch_state ts;
touch_get_state(&ts);
x = (3706 - ts.x) / 14;
y = (-461 + ts.y) / 10.5;
rt_kprintf("[drv_touch] touch_show_state, x: %d, y: %d, pressed: %d, padding: %d\n", ts.x , ts.y, ts.pressed, ts.padding);
rt_kprintf("[drv_touch] touch_show_state, phy x: %d, phy y: %d\n", x , y);
}
MSH_CMD_EXPORT(touch_show_state, show screen coordinate in touching);
static int rt_hw_touch_init(void)
{
static struct rt_device touch;
/* init device structure */
touch.type = RT_Device_Class_Unknown;
touch.init = stmpe811_touch_init;
touch.user_data = RT_NULL;
/* register touch device to RT-Thread */
rt_device_register(&touch, "touch", RT_DEVICE_FLAG_RDWR);
return RT_EOK;
}
INIT_BOARD_EXPORT(rt_hw_touch_init);
|
