1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
|
/*
* Copyright (c) 2006-2022, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-02-02 xuzhuoyi first version
*/
#include "rtdevice.h"
#include "board.h"
#include "drv_sci.h"
#include "F2837xD_device.h"
#include "F2837xD_sci.h"
//typedef long off_t;
#include "F2837xD_sci_io.h"
#ifdef RT_USING_SERIAL
#define LOG_TAG "drv.sci"
/* c28x uart driver class */
struct c28x_uart
{
const char *name;
volatile struct SCI_REGS *sci_regs;
struct rt_serial_device serial;
};
static struct c28x_uart uart_obj[3] = {0};
static rt_err_t c28x_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
struct c28x_uart *uart;
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
uart = (struct c28x_uart *)serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
EALLOW;
// default config
// 1 stop bit, No loopback
// No parity,8 char bits,
// async mode, idle-line protocol
uart->sci_regs->SCICCR.all = 0x0007;
// enable TX, RX, internal SCICLK,
// Disable RX ERR, SLEEP, TXWAKE
uart->sci_regs->SCICTL1.all = 0x0003;
uart->sci_regs->SCICTL2.bit.TXINTENA = 1;
uart->sci_regs->SCICTL2.bit.RXBKINTENA = 1;
uart->sci_regs->SCIHBAUD.all = 0x0000; // 115200 baud @LSPCLK = 22.5MHz (90 MHz SYSCLK).
uart->sci_regs->SCILBAUD.all = 53;
uart->sci_regs->SCICTL1.all = 0x0023; // Relinquish SCI from Reset
switch (cfg->data_bits)
{
case DATA_BITS_5:
uart->sci_regs->SCICCR.bit.SCICHAR = 4;
break;
case DATA_BITS_6:
uart->sci_regs->SCICCR.bit.SCICHAR = 5;
break;
case DATA_BITS_7:
uart->sci_regs->SCICCR.bit.SCICHAR = 6;
break;
case DATA_BITS_8:
uart->sci_regs->SCICCR.bit.SCICHAR = 7;
break;
default:
uart->sci_regs->SCICCR.bit.SCICHAR = 7;
break;
}
switch (cfg->stop_bits)
{
case STOP_BITS_1:
uart->sci_regs->SCICCR.bit.STOPBITS = 0;
break;
case STOP_BITS_2:
uart->sci_regs->SCICCR.bit.STOPBITS = 1;
break;
default:
uart->sci_regs->SCICCR.bit.STOPBITS = 0;
break;
}
switch (cfg->parity)
{
case PARITY_NONE:
uart->sci_regs->SCICCR.bit.PARITYENA = 0;
break;
case PARITY_ODD:
uart->sci_regs->SCICCR.bit.PARITYENA = 1;
uart->sci_regs->SCICCR.bit.PARITY = 0;
break;
case PARITY_EVEN:
uart->sci_regs->SCICCR.bit.PARITYENA = 1;
uart->sci_regs->SCICCR.bit.PARITY = 1;
break;
default:
uart->sci_regs->SCICCR.bit.PARITYENA = 0;
break;
}
EDIS;
return RT_EOK;
}
static rt_err_t c28x_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct c28x_uart *uart;
uart = (struct c28x_uart *)serial->parent.user_data;
EALLOW;
switch (cmd)
{
/* disable interrupt */
case RT_DEVICE_CTRL_CLR_INT:
/* disable interrupt */
uart->sci_regs->SCICTL2.bit.TXINTENA = 0;
uart->sci_regs->SCICTL2.bit.RXBKINTENA = 0;
break;
/* enable interrupt */
case RT_DEVICE_CTRL_SET_INT:
/* enable interrupt */
uart->sci_regs->SCICTL2.bit.TXINTENA = 1;
uart->sci_regs->SCICTL2.bit.RXBKINTENA = 1;
break;
}
return RT_EOK;
}
static int c28x_putc(struct rt_serial_device *serial, char c)
{
SCI_write(0, &c, 1);
return 1;
}
static int c28x_getc(struct rt_serial_device *serial)
{
char ch;
if(SCI_read(0, &ch, 1))
return ch;
else
return -1;
}
/**
* Uart common interrupt process. This need add to uart ISR.
*
* @param serial serial device
*/
static void uart_isr(struct rt_serial_device *serial) {
struct c28x_uart *uart = (struct c28x_uart *) serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
SciaRegs.SCIFFRX.bit.RXFFINTCLR = 1; // Clear Interrupt flag
PieCtrlRegs.PIEACK.all |= 0x100; // Issue PIE ack
}
static const struct rt_uart_ops c28x_uart_ops =
{
.configure = c28x_configure,
.control = c28x_control,
.putc = c28x_putc,
.getc = c28x_getc,
};
//
// sciaRxFifoIsr - SCIA Receive FIFO ISR
//
interrupt void sciaRxFifoIsr(void)
{
ALLOW_ISR_PREEMPT();
/* enter interrupt */
rt_interrupt_enter();
uart_isr(&uart_obj[0].serial);
/* leave interrupt */
rt_interrupt_leave();
}
int rt_hw_sci_init(void)
{
EALLOW;
GpioCtrlRegs.GPBMUX1.bit.GPIO42 = 3;
GpioCtrlRegs.GPBMUX1.bit.GPIO43 = 3;
GpioCtrlRegs.GPBGMUX1.bit.GPIO42 = 3;
GpioCtrlRegs.GPBGMUX1.bit.GPIO43 = 3;
GpioCtrlRegs.GPAMUX2.bit.GPIO18 = 2;
GpioCtrlRegs.GPAMUX2.bit.GPIO19 = 2;
GpioCtrlRegs.GPAGMUX2.bit.GPIO18 = 0;
GpioCtrlRegs.GPAGMUX2.bit.GPIO19 = 0;
GpioCtrlRegs.GPBMUX2.bit.GPIO56 = 2;
GpioCtrlRegs.GPEMUX1.bit.GPIO139 = 2;
GpioCtrlRegs.GPBGMUX2.bit.GPIO56 = 1;
GpioCtrlRegs.GPEGMUX1.bit.GPIO139 = 1;
CpuSysRegs.PCLKCR7.bit.SCI_A = 1;
CpuSysRegs.PCLKCR7.bit.SCI_B = 1;
CpuSysRegs.PCLKCR7.bit.SCI_C = 1;
PieVectTable.SCIA_RX_INT = &sciaRxFifoIsr;
EDIS;
//
// Enable interrupts required for this example
//
PieCtrlRegs.PIECTRL.bit.ENPIE = 1; // Enable the PIE block
PieCtrlRegs.PIEIER9.bit.INTx1 = 1; // PIE Group 9, INT1
IER |= 0x100; // Enable CPU INT
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
rt_err_t result = 0;
uart_obj[0].serial.ops = &c28x_uart_ops;
uart_obj[0].serial.config = config;
uart_obj[0].name = "scia";
uart_obj[0].sci_regs = &SciaRegs;
uart_obj[1].serial.ops = &c28x_uart_ops;
uart_obj[1].serial.config = config;
uart_obj[1].name = "scib";
uart_obj[1].sci_regs = &ScibRegs;
uart_obj[2].serial.ops = &c28x_uart_ops;
uart_obj[2].serial.config = config;
uart_obj[2].name = "scic";
uart_obj[2].sci_regs = &ScicRegs;
/* register UART device */
result = rt_hw_serial_register(&uart_obj[0].serial, uart_obj[0].name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart_obj[0]);
/* register UART device */
result = rt_hw_serial_register(&uart_obj[1].serial, uart_obj[1].name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart_obj[1]);
/* register UART device */
result = rt_hw_serial_register(&uart_obj[2].serial, uart_obj[2].name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart_obj[2]);
return result;
}
#endif /* RT_USING_SERIAL */
|
