path: root/bsp/wch/arm/ch579m/libraries/StdPeriphDriver/inc/CH579SFR.h

/* Define for CH579         */
/* Website:  http://wch.cn  */
/* Email:    [email protected]    */
/* Author:   W.ch 2016.10   */
/* V0.2 SpecialFunctionRegister */

// multi-blocks: __BASE_TYPE__, __CH579SFR_H__, __CH579ETHSFR_H__, __CH579USBSFR_H__, __USB_TYPE__...

#ifndef __BASE_TYPE__
#define __BASE_TYPE__

#ifdef __cplusplus
extern "C" {
#endif

/* ********************************************************************************************************************* */
/* Base types & constants */

#ifndef TRUE
#define TRUE                    1
#define FALSE                   0
#endif
#ifndef NULL
#define NULL                    0
#endif

#ifndef VOID
#define VOID                    void
#endif
#ifndef CONST
#define CONST                   const
#endif
#ifndef BOOL
typedef unsigned char           BOOL;
#endif
#ifndef BOOLEAN
typedef unsigned char           BOOLEAN;
#endif
#ifndef CHAR
typedef char                    CHAR;
#endif
#ifndef INT8
typedef char                    INT8;
#endif
#ifndef INT16
typedef short                   INT16;
#endif
#ifndef INT32
typedef long                    INT32;
#endif
#ifndef UINT8
typedef unsigned char           UINT8;
#endif
#ifndef UINT16
typedef unsigned short          UINT16;
#endif
#ifndef UINT32
typedef unsigned long           UINT32;
#endif
#ifndef UINT8V
typedef unsigned char volatile  UINT8V;
#endif
#ifndef UINT16V
typedef unsigned short volatile UINT16V;
#endif
#ifndef UINT32V
typedef unsigned long volatile  UINT32V;
#endif

#ifndef PVOID
typedef void                    *PVOID;
#endif
#ifndef PCHAR
typedef char                    *PCHAR;
#endif
#ifndef PCHAR
typedef const char              *PCCHAR;
#endif
#ifndef PINT8
typedef char                    *PINT8;
#endif
#ifndef PINT16
typedef short                   *PINT16;
#endif
#ifndef PINT32
typedef long                    *PINT32;
#endif
#ifndef PUINT8
typedef unsigned char           *PUINT8;
#endif
#ifndef PUINT16
typedef unsigned short          *PUINT16;
#endif
#ifndef PUINT32
typedef unsigned long           *PUINT32;
#endif
#ifndef PUINT8V
typedef volatile unsigned char  *PUINT8V;
#endif
#ifndef PUINT16V
typedef volatile unsigned short *PUINT16V;
#endif
#ifndef PUINT32V
typedef volatile unsigned long  *PUINT32V;
#endif

/* ********************************************************************************************************************* */
/* Base macros */

#ifndef min
#define min(a,b)                (((a) < (b)) ? (a) : (b))
#endif
#ifndef max
#define max(a,b)                (((a) > (b)) ? (a) : (b))
#endif

#ifdef  DEBUG
#define PRINT(X...) printf(X)
#else
#define PRINT(X...)
#endif

/* Calculate the byte offset of a field in a structure of type */
#define FIELD_OFFSET(Type, Field)    ((UINT16)&(((Type *)0)->Field))

/* Calculate the size of a field in a structure of type */
#define FIELD_SIZE(Type, Field)      (sizeof(((Type *)0)->Field))

/* An expression that yields the type of a field in a struct */
#define FIELD_TYPE(Type, Field)      (((Type *)0)->Field)

/* Return the number of elements in a statically sized array */
#define NUMBER_OF(Array)             (sizeof(Array)/sizeof((Array)[0]))
#define NUMBER_OF_FIELD(Type, Field) (NUMBER_OF(FIELD_TYPE(Type, Field)))

#ifdef __cplusplus
}
#endif

#endif  // __BASE_TYPE__


#ifndef __CH579SFR_H__
#define __CH579SFR_H__

#ifdef __cplusplus
extern "C" {
#endif

/* ********************************************************************************************************************* */

// Address Space
//    CODE:   00000000H - 0003FFFFH   256K
//    DATA:   20000000H - 20007FFFH   32KB
//    SFR:    40000000H - 4000FFFFH   64KB
//    PPB:    E0000000H - E000FFFFH   64KB
//
//    SFR:    40000000H - 4000FFFFH,  64KB
//      SYS:     +1000H - 1BFFH, include base configuration, interrupt, GPIO, etc...
//      TMR0:    +2000H - 23FFH
//      TMR1:    +2400H - 27FFH
//      TMR2:    +2800H - 2BFFH
//      TMR3:    +2C00H - 2FFFH
//      UART0:   +3000H - 33FFH
//      UART1:   +3400H - 37FFH
//      UART2:   +3800H - 3BFFH
//      UART3:   +3C00H - 3FFFH
//      SPI0:    +4000H - 43FFH
//      SPI1:    +4400H - 47FFH
//      PWMx:    +5000H - 53FFH
//      LCD:     +6000H - 63FFH
//      LED:     +6400H - 67FFH
//      USB:     +8000H - 83FFH
//      ETH:     +9000H - 93FFH
//      BLE:     +C000H - D3FFH

// Register Bit Attribute / Bit Access Type
//   RF:    Read only for Fixed value
//   RO:    Read Only (internal change)
//   RZ:    Read only with auto clear Zero
//   WO:    Write Only (read zero or different)
//   WA:    Write only under safe Accessing mode (read zero or different)
//   WZ:    Write only with auto clear Zero
//   RW:    Read / Write
//   RWA:   Read / Write under safe Accessing mode
//   RW1:   Read / Write 1 to Clear

/* Register name rule:
   R32_* for 32 bits register (UINT32,ULONG)
   R16_* for 16 bits register (UINT16,USHORT)
   R8_*  for  8 bits register (UINT8,UCHAR)
   RB_*  for bit or bit mask of 8 bit register
   BA_*  for base address point
   b*    for GPIO bit mask
   Others for register address offset */

/* ********************************************************************************************************************* */

/* System: safe accessing register */
#define R32_SAFE_ACCESS     (*((PUINT32V)0x40001040)) // RW, safe accessing
#define R8_SAFE_ACCESS_SIG  (*((PUINT8V)0x40001040))  // WO, safe accessing sign register, must write SAFE_ACCESS_SIG1 then SAFE_ACCESS_SIG2 to enter safe accessing mode
#define  RB_SAFE_ACC_MODE   0x03                      // RO, current safe accessing mode: 11=safe/unlocked (SAM), other=locked (00..01..10..11)
#define  RB_SAFE_ACC_ACT    0x08                      // RO, indicate safe accessing status now: 0=locked, read only, 1=safe/unlocked (SAM), write enabled
#define  RB_SAFE_ACC_TIMER  0x70                      // RO, safe accessing timer bit mask (16*clock number)
#define SAFE_ACCESS_SIG1    0x57                      // WO: safe accessing sign value step 1
#define SAFE_ACCESS_SIG2    0xA8                      // WO: safe accessing sign value step 2
#define SAFE_ACCESS_SIG0    0x00                      // WO: safe accessing sign value for disable
#define R8_CHIP_ID          (*((PUINT8V)0x40001041))  // RF, chip ID register, always is ID_CH57*
#define R8_SAFE_ACCESS_ID   (*((PUINT8V)0x40001042))  // RF, safe accessing ID register, always 0x04
#define R8_WDOG_COUNT       (*((PUINT8V)0x40001043))  // RW, watch-dog count, count by clock frequency Fsys/131072

/* System: global configuration register */
#define R32_GLOBAL_CONFIG   (*((PUINT32V)0x40001044)) // RW, global configuration
#define R8_RESET_STATUS     (*((PUINT8V)0x40001044))  // RWA, reset status, SAM
#define  RB_RESET_FLAG      0x07                      // RO: recent reset flag
#define  RST_FLAG_SW        0x00
#define  RST_FLAG_RPOR      0x01
#define  RST_FLAG_WTR       0x02
#define  RST_FLAG_MR        0x03
//#define  RST_FLAG_GPWSM     0x04                      // RO, power on reset flag during sleep/shutdown: 0=no power on reset during sleep/shutdown, 1=power on reset occurred during sleep/shutdown
#define  RST_FLAG_GPWSM     0x05
#define  RB_ROM_CODE_OFS    0x10                      // RWA, code offset address selection in Flash ROM: 0=start address 0x000000, 1=start address 0x008000
// RB_RESET_FLAG: recent reset flag
//   000 - SR, software reset, by RB_SOFTWARE_RESET=1 @RB_WDOG_RST_EN=0
//   001 - RPOR, real power on reset
//   010 - WTR, watch-dog timer-out reset
//   011 - MR, external manual reset by RST pin input low
//   101 - GRWSM, global reset by waking under shutdown mode
//   1?? - LRW, power on reset occurred during sleep
#define R8_GLOB_CFG_INFO    (*((PUINT8V)0x40001045))  // RO, global configuration information and status
#define  RB_CFG_ROM_READ    0x01                      // RO, indicate protected status of Flash ROM code and data: 0=reading protect, 1=enable read by external programmer
#define  RB_CFG_RESET_EN    0x04                      // RO, manual reset input enable status
#define  RB_CFG_BOOT_EN     0x08                      // RO, boot-loader enable status
#define  RB_CFG_DEBUG_EN    0x10                      // RO, debug enable status
#define  RB_BOOT_LOADER     0x20                      // RO, indicate boot loader status: 0=application status (by software reset), 1=boot loader status
#define R8_RST_WDOG_CTRL    (*((PUINT8V)0x40001046))  // RWA, reset and watch-dog control, SAM
#define  RB_SOFTWARE_RESET  0x01                      // WA/WZ, global software reset, high action, auto clear
#define  RB_WDOG_RST_EN     0x02                      // RWA, enable watch-dog reset if watch-dog timer overflow: 0=as timer only, 1=enable reset if timer overflow
#define  RB_WDOG_INT_EN     0x04                      // RWA, watch-dog timer overflow interrupt enable: 0=disable, 1=enable
#define  RB_WDOG_INT_FLAG   0x10                      // RW1, watch-dog timer overflow interrupt flag, cleared by RW1 or reload watch-dog count or __SEV(Send-Event)
#define R8_GLOB_RESET_KEEP  (*((PUINT8V)0x40001047))  // RW, value keeper during global reset

/* System: clock configuration register */
#define R32_CLOCK_CONFIG    (*((PUINT32V)0x40001008)) // RWA, clock configuration, SAM
#define R16_CLK_SYS_CFG     (*((PUINT16V)0x40001008)) // RWA, system clock configuration, SAM
#define  RB_CLK_PLL_DIV     0x1F                      // RWA, output clock divider from PLL or CK32M
#define  RB_CLK_SYS_MOD     0xC0                      // RWA, system clock source mode: 00=divided from 32MHz, 01=divided from PLL-480MHz, 10=directly from 32MHz, 11=directly from 32KHz
#define  RB_CLK_OSC32M_XT   0x0200                    // RWA, 32MHz clock source selection: 0=internal 32MHz oscillator, 1=external 32MHz oscillator
#define  RB_XO_DI           0x8000                    // RO, X32MO input status sample value
#define R8_HFCK_PWR_CTRL    (*((PUINT8V)0x4000100A))  // RWA, high frequency clock module power control, SAM
#define  RB_CLK_XT32M_PON   0x04                      // RWA, external 32MHz oscillator power control: 0=power down, 1-power on
#define  RB_CLK_INT32M_PON  0x08                      // RWA, internal 32MHz oscillator power control: 0=power down, 1-power on
#define  RB_CLK_PLL_PON     0x10                      // RWA, PLL power control: 0=power down, 1-power on
// Fck32m = RB_CLK_OSC32M_XT ? XT_32MHz : RC_32MHz
// Fck32k = RB_CLK_OSC32K_XT ? XT_32KHz : RC_32KHz
// Fpll = Fck32m * 15 = 480MHz
// Fsys = RB_CLK_SYS_MOD[1] ? ( RB_CLK_SYS_MOD[0] ? Fck32k : Fck32m ) : ( ( RB_CLK_SYS_MOD[0] ? Fpll : Fck32m ) / RB_CLK_PLL_DIV )
// default: Fsys = Fck32m / RB_CLK_PLL_DIV = 32MHz / 5 = 6.4MHz
//   range: 32KHz, 1MHz~16MHz, 32MHz, 15MHz~48MHz

/* System: sleep control register */
#define R32_SLEEP_CONTROL   (*((PUINT32V)0x4000100C)) // RWA, sleep control, SAM
#define R8_SLP_CLK_OFF0     (*((PUINT8V)0x4000100C))  // RWA, sleep clock off control byte 0, SAM
#define  RB_SLP_CLK_TMR0    0x01                      // RWA, close TMR0 clock
#define  RB_SLP_CLK_TMR1    0x02                      // RWA, close TMR1 clock
#define  RB_SLP_CLK_TMR2    0x04                      // RWA, close TMR2 clock
#define  RB_SLP_CLK_TMR3    0x08                      // RWA, close TMR3 clock
#define  RB_SLP_CLK_UART0   0x10                      // RWA, close UART0 clock
#define  RB_SLP_CLK_UART1   0x20                      // RWA, close UART1 clock
#define  RB_SLP_CLK_UART2   0x40                      // RWA, close UART2 clock
#define  RB_SLP_CLK_UART3   0x80                      // RWA, close UART3 clock
#define R8_SLP_CLK_OFF1     (*((PUINT8V)0x4000100D))  // RWA, sleep clock off control byte 1, SAM
#define  RB_SLP_CLK_SPI0    0x01                      // RWA, close SPI0 clock
#define  RB_SLP_CLK_SPI1    0x02                      // RWA, close SPI1 clock
#define  RB_SLP_CLK_PWMX    0x04                      // RWA, close PWMx clock
#define  RB_SLP_CLK_LCD     0x08                      // RWA, close LCD clock
#define  RB_SLP_CLK_USB     0x10                      // RWA, close USB clock
#define  RB_SLP_CLK_ETH     0x20                      // RWA, close ETH clock
#define  RB_SLP_CLK_LED     0x40                      // RWA, close LED clock
#define  RB_SLP_CLK_BLE     0x80                      // RWA, close BLE clock
#define R8_SLP_WAKE_CTRL    (*((PUINT8V)0x4000100E))  // RWA, wake control, SAM
#define  RB_SLP_USB_WAKE    0x01                      // RWA, enable USB waking
#define  RB_SLP_ETH_WAKE    0x02                      // RWA, enable ETH waking
//#define  RB_SLP_BLE_WAKE    0x04                      // RWA, enable BLE waking
#define  RB_SLP_RTC_WAKE    0x08                      // RWA, enable RTC waking
#define  RB_SLP_GPIO_WAKE   0x10                      // RWA, enable GPIO waking
#define  RB_SLP_BAT_WAKE    0x20                      // RWA, enable BAT waking
#define R8_SLP_POWER_CTRL   (*((PUINT8V)0x4000100F))  // RWA, peripherals power down control, SAM
//#define  RB_SLP_USB_PWR_DN  0x01                      // RWA, enable USB power down
#define  RB_SLP_ETH_PWR_DN  0x02                      // RWA, enable ETH PHY power down
//#define  RB_SLP_BLE_PWR_DN  0x04                      // RWA, enable BLE power down
#define  RB_SLP_ROM_PWR_DN  0x08                      // RWA, enable Flash ROM power down during halt
#define  RB_SLP_CLK_RAMX    0x10                      // RWA, close main SRAM clock
#define  RB_SLP_CLK_RAM2K   0x20                      // RWA, close retention 2KB SRAM clock

/* System: I/O pin configuration register */
#define R32_PIN_CONFIG      (*((PUINT32V)0x40001018)) // RW, I/O pin configuration
#define R16_PIN_ALTERNATE   (*((PUINT16V)0x40001018)) // RW, function pin alternate configuration
#define  RB_PIN_TMR0        0x01                      // RW, TMR0 alternate pin enable: 0=TMR0/PWM0/CAP0 on PA[3], 1=TMR0_/PWM0_/CAP0_ on PB[19]
#define  RB_PIN_TMR1        0x02                      // RW, TMR1 alternate pin enable: 0=TMR1/PWM1/CAP1 on PA[10], 1=TMR1_/PWM1_/CAP1_ on PB[10]
#define  RB_PIN_TMR2        0x04                      // RW, TMR2 alternate pin enable: 0=TMR2/PWM2/CAP2 on PA[11], 1=TMR2_/PWM2_/CAP2_ on PB[11]
#define  RB_PIN_TMR3        0x08                      // RW, TMR3 alternate pin enable: 0=TMR3/PWM3/CAP3 on PA[2], 1=TMR3_/PWM3_/CAP3_ on PB[18]
#define  RB_PIN_UART0       0x10                      // RW, RXD0/TXD0 alternate pin enable: 0=RXD0/TXD0 on PB[4]/PB[7], 1=RXD0_/TXD0_ on PA[15]/PA[14]
#define  RB_PIN_UART1       0x20                      // RW, RXD1/TXD1 alternate pin enable: 0=RXD1/TXD1 on PA[8]/PA[9], 1=RXD1_/TXD1_ on PB[8]/PB[9]
#define  RB_PIN_UART2       0x40                      // RW, RXD2/TXD2 alternate pin enable: 0=RXD2/TXD2 on PA[6]/PA[7], 1=RXD2_/TXD2_ on PB[22]/PB[23]
#define  RB_PIN_UART3       0x80                      // RW, RXD3/TXD3 alternate pin enable: 0=RXD3/TXD3 on PA[4]/PA[5], 1=RXD3_/TXD3_ on PB[20]/PB[21]
#define  RB_PIN_SPI0        0x100                     // RW, SCS/SCK0/MOSI/MISO alternate pin enable: 0=SCS/SCK0/MOSI/MISO on PA[12]/PA[13]/PA[14]/PA[15], 1=SCS_/SCK0_/MOSI_/MISO_ on PB[12]/PB[13]/PB[14]/PB[15]
#define R16_PIN_ANALOG_IE   (*((PUINT16V)0x4000101A)) // RW, analog pin enable and digital input disable
#define  RB_PIN_SEG0_3_IE   0x01                      // RW, LCD segment 0~3 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_SEG4_7_IE   0x02                      // RW, LCD segment 4~7 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_SEG8_11_IE  0x04                      // RW, LCD segment 8~11 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_SEG12_15_IE 0x08                      // RW, LCD segment 12~15 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_SEG16_19_IE 0x10                      // RW, LCD segment 16~19 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_SEG20_23_IE 0x20                      // RW, LCD segment 20~23 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_ETH_IE      0x40                      // RW, ETH analog I/O enable and digital input disable: 0=analog I/O disable and digital input enable, 1=analog I/O enable and digital input disable
#define  RB_PIN_USB_IE      0x80                      // RW, USB analog I/O enable: 0=analog I/O disable, 1=analog I/O enable
#define  RB_PIN_ADC8_9_IE   0x0100                    // RW, ADC/TouchKey channel 9/8 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_ADC6_7_IE   0x0200                    // RW, ADC/TouchKey channel 7/6 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_ADC0_1_IE   0x0400                    // RW, ADC/TouchKey channel 0/1 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_ADC10_11_IE 0x0800                    // RW, ADC/TouchKey channel 10/11 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_ADC12_13_IE 0x1000                    // RW, ADC/TouchKey channel 12/13 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_XT32K_IE    0x2000                    // RW, external 32KHz oscillator digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_ADC2_3_IE   0x4000                    // RW, ADC/TouchKey channel 2/3 digital input disable: 0=digital input enable, 1=digital input disable
#define  RB_PIN_ADC4_5_IE   0x8000                    // RW, ADC/TouchKey channel 4/5 digital input disable: 0=digital input enable, 1=digital input disable

/* System: parallel slave configuration register */
#define R32_PARA_SLV_CFG    (*((PUINT32V)0x4000101C)) // RW, parallel slave configuration
#define R8_SLV_CONFIG       (*((PUINT8V)0x4000101C))  // RW, parallel slave configuration
#define  RB_SLV_ENABLE      0x01                      // RW, parallel slave enable
#define  RB_SLV_IE_CMD      0x02                      // RW, enable interrupt for slave writing command event
#define  RB_SLV_IE_WR       0x04                      // RW, enable interrupt for slave writing event
#define  RB_SLV_IE_RD       0x08                      // RW, enable interrupt for slave reading event
#define  RB_IF_SLV_CMD      0x20                      // RO, parallel slave command synchronous flag
#define  RB_IF_SLV_WR       0x40                      // RW1, interrupt flag of parallel slave writing event
#define  RB_IF_SLV_RD       0x80                      // RW1, interrupt flag of parallel slave reading event
#define R8_SLV_RD_DATA      (*((PUINT8V)0x400010C8))  // RW, data for parallel slave read
#define R8_SLV_RD_STAT      (*((PUINT8V)0x40001096))  // RW, status for parallel slave read
#define R8_SLV_WR_DATA      (*((PUINT8V)0x40001097))  // RW, data or command from parallel slave write

/* System: power management register */
#define R32_POWER_MANAG     (*((PUINT32V)0x40001020)) // RWA, power management register, SAM
#define R16_POWER_PLAN      (*((PUINT16V)0x40001020)) // RWA, power plan before sleep instruction, SAM
#define  RB_PWR_RAM2K       0x02                      // RWA, power for retention 2KB SRAM
#define  RB_PWR_CORE        0x04                      // RWA, power retention for core and base peripherals
#define  RB_PWR_EXTEND      0x08                      // RWA, power retention for USB and BLE
#define  RB_PWR_RAM14K      0x10                      // RWA, power for main SRAM
#define  RB_PWR_SYS_EN      0x80                      // RWA, power for system
#define  RB_PWR_LDO_EN      0x0100                    // RWA, LDO enable
#define  RB_PWR_DCDC_EN     0x0200                    // RWA, DC/DC converter enable: 0=DC/DC disable and bypass, 1=DC/DC enable
#define  RB_PWR_DCDC_PRE    0x0400                    // RWA, DC/DC converter pre-enable
#define  RB_PWR_PLAN_EN     0x8000                    // RWA/WZ, power plan enable, auto clear after sleep executed
#define  RB_PWR_MUST_0010   0x1000                    // RWA, must write 0010
#define R8_AUX_POWER_ADJ    (*((PUINT8V)0x40001022))  // RWA, aux power adjust control, SAM
#define  RB_ULPLDO_ADJ      0x0007                    // RWA, Ultra-Low-Power LDO voltage adjust

/* System: battery detector register */
#define R32_BATTERY_CTRL    (*((PUINT32V)0x40001024)) // RWA, battery voltage detector, SAM
#define R8_BAT_DET_CTRL     (*((PUINT8V)0x40001024))  // RWA, battery voltage detector control, SAM
#define  RB_BAT_DET_EN      0x01                      // RWA, battery voltage detector enable
#define  RB_BAT_LOWER_IE    0x04                      // RWA, interrupt enable for battery lower voltage
#define  RB_BAT_LOW_IE      0x08                      // RWA, interrupt enable for battery low voltage
// request NMI interrupt if both RB_BAT_LOWER_IE and RB_BAT_LOW_IE enabled
#define R8_BAT_DET_CFG      (*((PUINT8V)0x40001025))  // RWA, battery voltage detector configuration, SAM
#define  RB_BAT_LOW_VTH     0x03                      // RWA, select threshold voltage of battery voltage low
#define R8_BAT_STATUS       (*((PUINT8V)0x40001026))  // RO, battery status
#define  RB_BAT_STAT_LOWER  0x01                      // RO, battery lower voltage status, high action
#define  RB_BAT_STAT_LOW    0x02                      // RO, battery low voltage status, high action

/* System: 32KHz oscillator control register */
#define R32_OSC32K_CTRL     (*((PUINT32V)0x4000102C)) // RWA, 32KHz oscillator control, SAM
#define R16_INT32K_TUNE     (*((PUINT16V)0x4000102C)) // RWA, internal 32KHz oscillator tune control, SAM
#define  RB_INT32K_TUNE     0x03FF                    // RWA, internal 32KHz oscillator frequency tune
#define R8_XT32K_TUNE       (*((PUINT8V)0x4000102E))  // RWA, external 32KHz oscillator tune control, SAM
#define  RB_XT32K_I_TUNE    0x03                      // RWA, external 32KHz oscillator current tune: 00=75% current, 01=standard current, 10=150% current, 11=200% current
#define  RB_XT32K_C_LOAD    0xF0                      // RWA, external 32KHz oscillator load capacitor tune: Cap = RB_XT32K_C_LOAD + 12pF
#define R8_CK32K_CONFIG     (*((PUINT8V)0x4000102F))  // RWA, 32KHz oscillator configure
#define  RB_CLK_XT32K_PON   0x01                      // RWA, external 32KHz oscillator power on
#define  RB_CLK_INT32K_PON  0x02                      // RWA, internal 32KHz oscillator power on
#define  RB_CLK_OSC32K_XT   0x04                      // RWA, 32KHz oscillator source selection: 0=RC, 1=XT
#define  RB_32K_CLK_PIN     0x80                      // RO, 32KHz oscillator clock pin status

/* System: real-time clock register */
#define R32_RTC_CTRL        (*((PUINT32V)0x40001030)) // RWA, RTC control, SAM
#define R8_RTC_FLAG_CTRL    (*((PUINT8V)0x40001030))  // RW, RTC flag and clear control
#define  RB_RTC_TMR_CLR     0x10                      // RW, set 1 to clear RTC timer action flag, auto clear
#define  RB_RTC_TRIG_CLR    0x20                      // RW, set 1 to clear RTC trigger action flag, auto clear
#define  RB_RTC_TMR_FLAG    0x40                      // RO, RTC timer action flag
#define  RB_RTC_TRIG_FLAG   0x80                      // RO, RTC trigger action flag
#define R8_RTC_MODE_CTRL    (*((PUINT8V)0x40001031))  // RWA, RTC mode control, SAM
#define  RB_RTC_TMR_MODE    0x07                      // RWA, RTC timer mode: 000=0.125S, 001=0.25S, 010=0.5S, 011=1S, 100=2S, 101=4S, 110=8S, 111=16S
#define  RB_RTC_IGNORE_B0   0x08                      // RWA, force ignore bit0 for trigger mode: 0=compare bit0, 1=ignore bit0
#define  RB_RTC_TMR_EN      0x10                      // RWA, RTC timer mode enable
#define  RB_RTC_TRIG_EN     0x20                      // RWA, RTC trigger mode enable
#define  RB_RTC_LOAD_LO     0x40                      // RWA, set 1 to load RTC count low word R32_RTC_CNT_32K, auto clear after loaded
#define  RB_RTC_LOAD_HI     0x80                      // RWA, set 1 to load RTC count high word R32_RTC_CNT_DAY, auto clear after loaded
#define R32_RTC_TRIG        (*((PUINT32V)0x40001034)) // RWA, RTC trigger value, SAM
#define R32_RTC_CNT_32K     (*((PUINT32V)0x40001038)) // RO, RTC count based 32KHz
#define R16_RTC_CNT_32K     (*((PUINT16V)0x40001038)) // RO, RTC count based 32KHz
#define R16_RTC_CNT_2S      (*((PUINT16V)0x4000103A)) // RO, RTC count based 2 second
#define R32_RTC_CNT_DAY     (*((PUINT32V)0x4000103C)) // RO, RTC count based one day, only low 14 bit

/*System: Miscellaneous Control register */
#define R32_MISC_CTRL       (*((PUINT32V)0x40001048)) // RWA, miscellaneous control register
#define R8_CFG_FLASH        (*((PUINT8V)0x4000104A))  // RWA, Flash ROM configure register
#define  RB_CFG_FLASH_X     0x0F                      // RWA, Flash ROM configure data, keep the value unchanged if write
#define  RB_FLASH_BUSY_EN   0x80                      // RWA, enable ROM busy if burst reading: 1-enable(suggest), 0-disable
#define R8_PLL_CONFIG       (*((PUINT8V)0x4000104B))  // RWA, PLL configuration control, SAM
#define  RB_PLL_CFG_DAT     0x03                      // RWA, PLL configure data
#define  RB_PLL_LOCKED      0x80                      // RO, indicate PLL locked

/* System: 32MHz oscillator control register */
#define R32_OSC32M_CTRL     (*((PUINT32V)0x4000104C)) // RWA, 32MHz oscillator control, SAM
#define R8_INT32M_CALIB     (*((PUINT8V)0x4000104C))  // RWA, internal 32MHz oscillator tune control, SAM
#define R8_XT32M_TUNE       (*((PUINT8V)0x4000104E))  // RWA, external 32MHz oscillator tune control, SAM
#define  RB_XT32M_I_BIAS    0x03                      // RWA, external 32MHz oscillator bias current tune: 00=75% current, 01=standard current, 10=125% current, 11=150% current
#define  RB_XT32M_C_LOAD    0x70                      // RWA, external 32MHz oscillator load capacitor tune: Cap = RB_XT32M_C_LOAD * 2 + 10pF

/* System: oscillator frequency calibration register */
#define R32_OSC_CALIB       (*((PUINT32V)0x40001050)) // RWA, oscillator frequency calibration, SAM
#define R16_OSC_CAL_CNT     (*((PUINT16V)0x40001050)) // RO, system clock count value for 32KHz 5 cycles
#define  RB_OSC_CAL_CNT     0x0FFF                    // RO, system clock count value for 32KHz 5 cycles
#define R8_OSC_CAL_CTRL     (*((PUINT8V)0x40001052))  // RWA, oscillator frequency calibration control, SAM
#define  RB_OSC_CNT_EN      0x01                      // RWA, calibration counter enable
#define  RB_OSC_CNT_HALT    0x02                      // RO, calibration counter halt status: 0=counting, 1=halt for reading count value

/* System: ADC and Touch-key register */
#define R32_ADC_CTRL        (*((PUINT32V)0x40001058)) // RW, ADC control
#define R8_ADC_CHANNEL      (*((PUINT8V)0x40001058))  // RW, ADC input channel selection
#define  RB_ADC_CH_INX      0x0F                      // RW, ADC input channel index
#define R8_ADC_CFG          (*((PUINT8V)0x40001059))  // RW, ADC configure
#define  RB_ADC_POWER_ON    0x01                      // RW, ADC power control: 0=power down, 1=power on
#define  RB_ADC_BUF_EN      0x02                      // RW, ADC input buffer enable
#define  RB_ADC_DIFF_EN     0x04                      // RW, ADC input channel mode: 0=single-end, 1=differnetial
#define  RB_ADC_OFS_TEST    0x08                      // RW, enable ADC offset test mode: 0=normal mode, 1=short port4 to test offset
#define  RB_ADC_PGA_GAIN    0x30                      // RW, set ADC input PGA gain: 00=-12dB, 01=-6dB, 10=0dB, 11=6dB
#define  RB_ADC_CLK_DIV     0xC0                      // RW, select ADC clock frequency: 00=3.2MHz, 01=2.67MHz, 10=5.33MHz, 11=4MHz
#define R8_ADC_CONVERT      (*((PUINT8V)0x4000105A))  // RW, ADC convert control
#define  RB_ADC_START       0x01                      // RW, ADC convert start control: 0=stop ADC convert, 1=start an ADC convert, auto clear
#define  RB_ADC_EOC_X       0x80                      // RO, end of ADC conversion flag
#define R8_TEM_SENSOR       (*((PUINT8V)0x4000105B))  // RW, temperature sensor control
#define  RB_TEM_SEN_CALIB   0x07                      // RW, temperature sensor calibration
#define  RB_TEM_SEN_PWR_ON  0x80                      // RW, temperature sensor power control: 0=power down, 1=power on
#define R32_ADC_DATA        (*((PUINT32V)0x4000105C)) // RO, ADC data and status
#define R16_ADC_DATA        (*((PUINT16V)0x4000105C)) // RO, ADC data
#define  RB_ADC_DATA        0x0FFF                    // RO, ADC conversion data
#define R8_ADC_INT_FLAG     (*((PUINT8V)0x4000105E))  // RO, ADC interrupt flag register
#define  RB_ADC_IF_EOC      0x80                      // RO, ADC conversion interrupt flag: 0=free or converting, 1=end of conversion, interrupt action, write R8_ADC_CONVERT to clear flag
#define R8_TKEY_CTRL        (*((PUINT8V)0x4000105A))  // RW, Touchkey capacity charge and discharge status
#define  RB_TKEY_PWR_ON     0x08                      // RW, Touchkey power on: 0=power down, 1=power on
#define  RB_TKEY_ACTION     0x10                      // RO, Touchkey action status: 0=free, 1=discharge or charge or ADC
#define  RB_TKEY_CHG_ACT    0x20                      // RO, Touchkey capacity charge status: 0=free, 1=charge
#define R8_TKEY_CNT         (*((PUINT8V)0x4000105F))  // WO, Touch-key charge and discharge count

/* System: Flash ROM control register */
#define R32_FLASH_DATA      (*((PUINT32V)0x40001800)) // RW, Flash ROM data
#define R32_FLASH_ADDR      (*((PUINT32V)0x40001804)) // RW, Flash ROM address
#define R32_FLASH_CTRL      (*((PUINT32V)0x40001808)) // RW, Flash ROM control and status
#define R8_FLASH_COMMAND    (*((PUINT8V)0x40001808))  // WO, Flash ROM operation command
#define ROM_CMD_PROG        0x9A                      // WO: Flash ROM word program operation command, for changing some ROM bit of a word from 1 to 0
#define ROM_CMD_ERASE       0xA6                      // WO: Flash ROM sector erase operation command, for changing all ROM bit of 512Bytes from 0 to 1
#define R8_FLASH_PROTECT    (*((PUINT8V)0x40001809))  // RW, Flash ROM protect control
#define  RB_ROM_DATA_WE     0x04                      // RW, enable Flash ROM data area being erase/write: 0=writing protect, 1=enable program and erase
#define  RB_ROM_CODE_WE     0x08                      // RW, enable Flash ROM code area being erase/write: 0=writing protect, 1=enable program and erase
#define  RB_ROM_WE_MUST_10  0x80                      // RW, must write 10
#define R16_FLASH_STATUS    (*((PUINT16V)0x4000180A))  // RO, Flash ROM operation status
#define R8_FLASH_STATUS     (*((PUINT8V)0x4000180A))  // RO, Flash ROM operation status
#define  RB_ROM_CMD_TOUT    0x01                      // RO, Flash ROM operation result: 0=success, 1=operation time out
#define  RB_ROM_CMD_ERR     0x02                      // RO, Flash ROM operation command error flag: 0=command accepted, 1=unknown command
#define  RB_ROM_ADDR_OK     0x40                      // RO, Flash ROM erase/write operation address valid flag, can be reviewed before or after operation: 0=invalid parameter, 1=address valid
#define  RB_ROM_READ_FREE   0x100                     // RO, indicate protected status of Flash ROM code and data: 0=reading protect, 1=enable read by external programmer

/* System: GPIO interrupt control register */
#define R32_GPIO_INT_EN     (*((PUINT32V)0x40001090)) // RW, GPIO interrupt enable
#define R16_PA_INT_EN       (*((PUINT16V)0x40001090)) // RW, GPIO PA interrupt enable
#define R16_PB_INT_EN       (*((PUINT16V)0x40001092)) // RW, GPIO PB interrupt enable
#define R32_GPIO_INT_MODE   (*((PUINT32V)0x40001094)) // RW, GPIO interrupt mode: 0=level action, 1=edge action
#define R16_PA_INT_MODE     (*((PUINT16V)0x40001094)) // RW, GPIO PA interrupt mode: 0=level action, 1=edge action
#define R16_PB_INT_MODE     (*((PUINT16V)0x40001096)) // RW, GPIO PB interrupt mode: 0=level action, 1=edge action
#define R32_GPIO_INT_IF     (*((PUINT32V)0x4000109C)) // RW1, GPIO interrupt flag
#define R16_PA_INT_IF       (*((PUINT16V)0x4000109C)) // RW1, GPIO PA interrupt flag
#define R16_PB_INT_IF       (*((PUINT16V)0x4000109E)) // RW1, GPIO PB interrupt flag

/* GPIO PA register */
#define R32_PA_DIR          (*((PUINT32V)0x400010A0)) // RW, GPIO PA I/O direction: 0=in, 1=out
#define R8_PA_DIR_0         (*((PUINT8V)0x400010A0))  // RW, GPIO PA I/O direction byte 0
#define R8_PA_DIR_1         (*((PUINT8V)0x400010A1))  // RW, GPIO PA I/O direction byte 1
#define R32_PA_PIN          (*((PUINT32V)0x400010A4)) // RO, GPIO PA input
#define R8_PA_PIN_0         (*((PUINT8V)0x400010A4))  // RO, GPIO PA input byte 0
#define R8_PA_PIN_1         (*((PUINT8V)0x400010A5))  // RO, GPIO PA input byte 1
#define R32_PA_OUT          (*((PUINT32V)0x400010A8)) // RW, GPIO PA output
#define R8_PA_OUT_0         (*((PUINT8V)0x400010A8))  // RW, GPIO PA output byte 0
#define R8_PA_OUT_1         (*((PUINT8V)0x400010A9))  // RW, GPIO PA output byte 1
#define R32_PA_CLR          (*((PUINT32V)0x400010AC)) // WZ, GPIO PA clear output: 0=keep, 1=clear
#define R8_PA_CLR_0         (*((PUINT8V)0x400010AC))  // WZ, GPIO PA clear output byte 0
#define R8_PA_CLR_1         (*((PUINT8V)0x400010AD))  // WZ, GPIO PA clear output byte 1
#define R32_PA_PU           (*((PUINT32V)0x400010B0)) // RW, GPIO PA pullup resistance enable
#define R8_PA_PU_0          (*((PUINT8V)0x400010B0))  // RW, GPIO PA pullup resistance enable byte 0
#define R8_PA_PU_1          (*((PUINT8V)0x400010B1))  // RW, GPIO PA pullup resistance enable byte 1
#define R32_PA_PD_DRV       (*((PUINT32V)0x400010B4)) // RW, PA pulldown for input or PA driving capability for output
#define R8_PA_PD_DRV_0      (*((PUINT8V)0x400010B4))  // RW, PA pulldown for input or PA driving capability for output byte 0
#define R8_PA_PD_DRV_1      (*((PUINT8V)0x400010B5))  // RW, PA pulldown for input or PA driving capability for output byte 1

/* GPIO PB register */
#define R32_PB_DIR          (*((PUINT32V)0x400010C0)) // RW, GPIO PB I/O direction: 0=in, 1=out
#define R8_PB_DIR_0         (*((PUINT8V)0x400010C0))  // RW, GPIO PB I/O direction byte 0
#define R8_PB_DIR_1         (*((PUINT8V)0x400010C1))  // RW, GPIO PB I/O direction byte 1
#define R8_PB_DIR_2         (*((PUINT8V)0x400010C2))  // RW, GPIO PB I/O direction byte 2
#define R32_PB_PIN          (*((PUINT32V)0x400010C4)) // RO, GPIO PB input
#define R8_PB_PIN_0         (*((PUINT8V)0x400010C4))  // RO, GPIO PB input byte 0
#define R8_PB_PIN_1         (*((PUINT8V)0x400010C5))  // RO, GPIO PB input byte 1
#define R8_PB_PIN_2         (*((PUINT8V)0x400010C6))  // RO, GPIO PB input byte 2
#define R32_PB_OUT          (*((PUINT32V)0x400010C8)) // RW, GPIO PB output
#define R8_PB_OUT_0         (*((PUINT8V)0x400010C8))  // RW, GPIO PB output byte 0
#define R8_PB_OUT_1         (*((PUINT8V)0x400010C9))  // RW, GPIO PB output byte 1
#define R8_PB_OUT_2         (*((PUINT8V)0x400010CA))  // RW, GPIO PB output byte 2
#define R32_PB_CLR          (*((PUINT32V)0x400010CC)) // WZ, GPIO PB clear output: 0=keep, 1=clear
#define R8_PB_CLR_0         (*((PUINT8V)0x400010CC))  // WZ, GPIO PB clear output byte 0
#define R8_PB_CLR_1         (*((PUINT8V)0x400010CD))  // WZ, GPIO PB clear output byte 1
#define R8_PB_CLR_2         (*((PUINT8V)0x400010CE))  // WZ, GPIO PB clear output byte 2
#define R32_PB_PU           (*((PUINT32V)0x400010D0)) // RW, GPIO PB pullup resistance enable
#define R8_PB_PU_0          (*((PUINT8V)0x400010D0))  // RW, GPIO PB pullup resistance enable byte 0
#define R8_PB_PU_1          (*((PUINT8V)0x400010D1))  // RW, GPIO PB pullup resistance enable byte 1
#define R8_PB_PU_2          (*((PUINT8V)0x400010D2))  // RW, GPIO PB pullup resistance enable byte 2
#define R32_PB_PD_DRV       (*((PUINT32V)0x400010D4)) // RW, PB pulldown for input or PB driving capability for output
#define R8_PB_PD_DRV_0      (*((PUINT8V)0x400010D4))  // RW, PB pulldown for input or PB driving capability for output byte 0
#define R8_PB_PD_DRV_1      (*((PUINT8V)0x400010D5))  // RW, PB pulldown for input or PB driving capability for output byte 1
#define R8_PB_PD_DRV_2      (*((PUINT8V)0x400010D6))  // RW, PB pulldown for input or PB driving capability for output byte 2

/* GPIO register address offset and bit define */
#define BA_PA               ((PUINT8V)0x400010A0)     // point GPIO PA base address
#define BA_PB               ((PUINT8V)0x400010C0)     // point GPIO PB base address
#define GPIO_DIR            0x00
#define GPIO_DIR_0          0x00
#define GPIO_DIR_1          0x01
#define GPIO_DIR_2          0x02
#define GPIO_PIN            0x04
#define GPIO_PIN_0          0x04
#define GPIO_PIN_1          0x05
#define GPIO_PIN_2          0x06
#define GPIO_OUT            0x08
#define GPIO_OUT_0          0x08
#define GPIO_OUT_1          0x09
#define GPIO_OUT_2          0x0A
#define GPIO_CLR            0x0C
#define GPIO_CLR_0          0x0C
#define GPIO_CLR_1          0x0D
#define GPIO_CLR_2          0x0E
#define GPIO_PU             0x10
#define GPIO_PU_0           0x10
#define GPIO_PU_1           0x11
#define GPIO_PU_2           0x12
#define GPIO_PD_DRV         0x14
#define GPIO_PD_DRV_0       0x14
#define GPIO_PD_DRV_1       0x15
#define GPIO_PD_DRV_2       0x16

/* GPIO alias name */
#define  bSCK1              (1<<0)                    // PA0
#define  bPADDR             (1<<0)                    // PA0
#define  bLED0              (1<<0)                    // PA0
#define  bCOM0              (1<<0)                    // PA0
#define  bSDO               (1<<1)                    // PA1
#define  bMOSI1             bSDO
#define  bPCS               (1<<1)                    // PA1
#define  bLED1              (1<<1)                    // PA1
#define  bCOM1              (1<<1)                    // PA1
#define  bTMR3              (1<<2)                    // PA2
#define  bCAP3              bTMR3
#define  bPWM3              bTMR3
#define  bSDI               (1<<2)                    // PA2
#define  bMISO1             bSDI
#define  bLED2              (1<<2)                    // PA2
#define  bCOM2              (1<<2)                    // PA2
#define  bTMR0              (1<<3)                    // PA3
#define  bCAP0              bTMR0
#define  bPWM0              bTMR0
#define  bPINT              (1<<3)                    // PA3
#define  bLED3              (1<<3)                    // PA3
#define  bCOM3              (1<<3)                    // PA3
#define  bUBUS1             (1<<4)                    // PA4
#define  bAIN0              (1<<4)                    // PA4
#define  bRXD3              (1<<4)                    // PA4
#define  bLEDC              (1<<4)                    // PA4
#define  bUCC1              (1<<5)                    // PA5
#define  bAIN1              (1<<5)                    // PA5
#define  bTXD3              (1<<5)                    // PA5
#define  bUCC2              (1<<6)                    // PA6
#define  bAIN2              (1<<6)                    // PA6
#define  bRXD2              (1<<6)                    // PA6
#define  bPWM4              (1<<6)                    // PA6
#define  bTIN3              (1<<7)                    // PA7
#define  bTXD2              (1<<7)                    // PA7
#define  bPWM5              (1<<7)                    // PA7
#define  bTIN4              (1<<8)                    // PA8
#define  bRXD1              (1<<8)                    // PA8
#define  bTIN5              (1<<9)                    // PA9
#define  bTXD1              (1<<9)                    // PA9
#define  bX32KI             (1<<10)                   // PA10
#define  bTMR1              (1<<10)                   // PA10
#define  bCAP1              bTMR1
#define  bPWM1              bTMR1
#define  bX32KO             (1<<11)                   // PA11
#define  bTMR2              (1<<11)                   // PA11
#define  bCAP2              bTMR2
#define  bPWM2              bTMR2
#define  bTIN2              (1<<12)                   // PA12
#define  bSCS               (1<<12)                   // PA12
#define  bTIN1              (1<<13)                   // PA13
#define  bSCK0              (1<<13)                   // PA13
#define  bUBUS2             (1<<14)                   // PA14
#define  bAIN3              (1<<14)                   // PA14
#define  bMOSI              (1<<14)                   // PA14
#define  bTXD0_             (1<<14)                   // PA14
#define  bTIN0              (1<<15)                   // PA15
#define  bMISO              (1<<15)                   // PA15
#define  bRXD0_             (1<<15)                   // PA15
#define  bCTS               (1<<0)                    // PB0
#define  bPWM6              (1<<0)                    // PB0
#define  bSEG0              (1<<0)                    // PB0
#define  bDSR               (1<<1)                    // PB1
#define  bPWM7              (1<<1)                    // PB1
#define  bSEG1              (1<<1)                    // PB1
#define  bRI                (1<<2)                    // PB2
#define  bPWM8              (1<<2)                    // PB2
#define  bSEG2              (1<<2)                    // PB2
#define  bDCD               (1<<3)                    // PB3
#define  bPWM9              (1<<3)                    // PB3
#define  bSEG3              (1<<3)                    // PB3
#define  bRXD0              (1<<4)                    // PB4
#define  bSEG4              (1<<4)                    // PB4
#define  bDTR               (1<<5)                    // PB5
#define  bSEG5              (1<<5)                    // PB5
#define  bRTS               (1<<6)                    // PB6
#define  bSEG6              (1<<6)                    // PB6
#define  bTXD0              (1<<7)                    // PB7
#define  bSEG7              (1<<7)                    // PB7
#define  bPBUS              (0xFF<<0)                 // PB0~PB7
#define  bTIN8              (1<<8)                    // PB8
#define  bRXD1_             (1<<8)                    // PB8
#define  bPRD               (1<<8)                    // PB8
#define  bSEG8              (1<<8)                    // PB8
#define  bTIN9              (1<<9)                    // PB9
#define  bTXD1_             (1<<9)                    // PB9
#define  bPWR               (1<<9)                    // PB9
#define  bSEG9              (1<<9)                    // PB9
#define  bUDM               (1<<10)                   // PB10
#define  bTMR1_             (1<<10)                   // PB10
#define  bCAP1_             bTMR1_
#define  bPWM1_             bTMR1_
#define  bSEG10             (1<<10)                   // PB10
#define  bUDP               (1<<11)                   // PB11
#define  bTMR2_             (1<<11)                   // PB11
#define  bCAP2_             bTMR2_
#define  bPWM2_             bTMR2_
#define  bSEG11             (1<<11)                   // PB11
#define  bETM               (1<<12)                   // PB12
#define  bSCS_              (1<<12)                   // PB12
#define  bSEG12             (1<<12)                   // PB12
#define  bETP               (1<<13)                   // PB13
#define  bSCK0_             (1<<13)                   // PB13
#define  bSEG13             (1<<13)                   // PB13
#define  bERM               (1<<14)                   // PB14
#define  bMOSI_             (1<<14)                   // PB14
#define  bPWM10             (1<<14)                   // PB14
#define  bSEG14             (1<<14)                   // PB14
#define  bERP               (1<<15)                   // PB15
#define  bMISO_             (1<<15)                   // PB15
#define  bSEG15             (1<<15)                   // PB15
#define  bTIN6              (1<<16)                   // PB16
#define  bTIO               (1<<16)                   // PB16
#define  bSEG16             (1<<16)                   // PB16
#define  bTIN7              (1<<17)                   // PB17
#define  bTCK               (1<<17)                   // PB17
#define  bSEG17             (1<<17)                   // PB17
#define  bTMR3_             (1<<18)                   // PB18
#define  bCAP3_             bTMR3_
#define  bPWM3_             bTMR3_
#define  bSEG18             (1<<18)                   // PB18
#define  bTMR0_             (1<<19)                   // PB19
#define  bCAP0_             bTMR0_
#define  bPWM0_             bTMR0_
#define  bSEG19             (1<<19)                   // PB19
#define  bRXD3_             (1<<20)                   // PB20
#define  bSEG20             (1<<20)                   // PB20
#define  bTXD3_             (1<<21)                   // PB21
#define  bSEG21             (1<<21)                   // PB21
#define  bRXD2_             (1<<22)                   // PB22
#define  bSEG22             (1<<22)                   // PB22
#define  bRST               (1<<23)                   // PB23
#define  bTXD2_             (1<<23)                   // PB23
#define  bPWM11             (1<<23)                   // PB23
#define  bSEG23             (1<<23)                   // PB23

/* Timer0 register */
#define R32_TMR0_CONTROL    (*((PUINT32V)0x40002000)) // RW, TMR0 control
#define R8_TMR0_CTRL_MOD    (*((PUINT8V)0x40002000))  // RW, TMR0 mode control
#define R8_TMR0_INTER_EN    (*((PUINT8V)0x40002002))  // RW, TMR0 interrupt enable
#define R32_TMR0_STATUS     (*((PUINT32V)0x40002004)) // RW, TMR0 status
#define R8_TMR0_INT_FLAG    (*((PUINT8V)0x40002006))  // RW1, TMR0 interrupt flag
#define R8_TMR0_FIFO_COUNT  (*((PUINT8V)0x40002007))  // RO, TMR0 FIFO count status
#define R32_TMR0_COUNT      (*((PUINT32V)0x40002008)) // RO, TMR0 current count
#define R16_TMR0_COUNT      (*((PUINT16V)0x40002008)) // RO, TMR0 current count
#define R8_TMR0_COUNT       (*((PUINT8V)0x40002008))  // RO, TMR0 current count
#define R32_TMR0_CNT_END    (*((PUINT32V)0x4000200C)) // RW, TMR0 end count value, only low 26 bit
#define R32_TMR0_FIFO       (*((PUINT32V)0x40002010)) // RO/WO, TMR0 FIFO register, only low 26 bit
#define R16_TMR0_FIFO       (*((PUINT16V)0x40002010)) // RO/WO, TMR0 FIFO register
#define R8_TMR0_FIFO        (*((PUINT8V)0x40002010))  // RO/WO, TMR0 FIFO register

/* Timer1 register */
#define R32_TMR1_CONTROL    (*((PUINT32V)0x40002400)) // RW, TMR1 control
#define R8_TMR1_CTRL_MOD    (*((PUINT8V)0x40002400))  // RW, TMR1 mode control
#define R8_TMR1_CTRL_DMA    (*((PUINT8V)0x40002401))  // RW, TMR1 DMA control
#define R8_TMR1_INTER_EN    (*((PUINT8V)0x40002402))  // RW, TMR1 interrupt enable
#define R32_TMR1_STATUS     (*((PUINT32V)0x40002404)) // RW, TMR1 status
#define R8_TMR1_INT_FLAG    (*((PUINT8V)0x40002406))  // RW1, TMR1 interrupt flag
#define R8_TMR1_FIFO_COUNT  (*((PUINT8V)0x40002407))  // RO, TMR1 FIFO count status
#define R32_TMR1_COUNT      (*((PUINT32V)0x40002408)) // RO, TMR1 current count
#define R16_TMR1_COUNT      (*((PUINT16V)0x40002408)) // RO, TMR1 current count
#define R8_TMR1_COUNT       (*((PUINT8V)0x40002408))  // RO, TMR1 current count
#define R32_TMR1_CNT_END    (*((PUINT32V)0x4000240C)) // RW, TMR1 end count value, only low 26 bit
#define R32_TMR1_FIFO       (*((PUINT32V)0x40002410)) // RO/WO, TMR1 FIFO register, only low 26 bit
#define R16_TMR1_FIFO       (*((PUINT16V)0x40002410)) // RO/WO, TMR1 FIFO register
#define R8_TMR1_FIFO        (*((PUINT8V)0x40002410))  // RO/WO, TMR1 FIFO register
#define R32_TMR1_DMA_NOW    (*((PUINT32V)0x40002414)) // RW, TMR1 DMA current address
#define R16_TMR1_DMA_NOW    (*((PUINT16V)0x40002414)) // RW, TMR1 DMA current address
#define R32_TMR1_DMA_BEG    (*((PUINT32V)0x40002418)) // RW, TMR1 DMA begin address
#define R16_TMR1_DMA_BEG    (*((PUINT16V)0x40002418)) // RW, TMR1 DMA begin address
#define R32_TMR1_DMA_END    (*((PUINT32V)0x4000241C)) // RW, TMR1 DMA end address
#define R16_TMR1_DMA_END    (*((PUINT16V)0x4000241C)) // RW, TMR1 DMA end address

/* Timer2 register */
#define R32_TMR2_CONTROL    (*((PUINT32V)0x40002800)) // RW, TMR2 control
#define R8_TMR2_CTRL_MOD    (*((PUINT8V)0x40002800))  // RW, TMR2 mode control
#define R8_TMR2_CTRL_DMA    (*((PUINT8V)0x40002801))  // RW, TMR2 DMA control
#define R8_TMR2_INTER_EN    (*((PUINT8V)0x40002802))  // RW, TMR2 interrupt enable
#define R32_TMR2_STATUS     (*((PUINT32V)0x40002804)) // RW, TMR2 status
#define R8_TMR2_INT_FLAG    (*((PUINT8V)0x40002806))  // RW1, TMR2 interrupt flag
#define R8_TMR2_FIFO_COUNT  (*((PUINT8V)0x40002807))  // RO, TMR2 FIFO count status
#define R32_TMR2_COUNT      (*((PUINT32V)0x40002808)) // RO, TMR2 current count
#define R16_TMR2_COUNT      (*((PUINT16V)0x40002808)) // RO, TMR2 current count
#define R8_TMR2_COUNT       (*((PUINT8V)0x40002808))  // RO, TMR2 current count
#define R32_TMR2_CNT_END    (*((PUINT32V)0x4000280C)) // RW, TMR2 end count value, only low 26 bit
#define R32_TMR2_FIFO       (*((PUINT32V)0x40002810)) // RO/WO, TMR2 FIFO register, only low 26 bit
#define R16_TMR2_FIFO       (*((PUINT16V)0x40002810)) // RO/WO, TMR2 FIFO register
#define R8_TMR2_FIFO        (*((PUINT8V)0x40002810))  // RO/WO, TMR2 FIFO register
#define R32_TMR2_DMA_NOW    (*((PUINT32V)0x40002814)) // RW, TMR2 DMA current address
#define R16_TMR2_DMA_NOW    (*((PUINT16V)0x40002814)) // RW, TMR2 DMA current address
#define R32_TMR2_DMA_BEG    (*((PUINT32V)0x40002818)) // RW, TMR2 DMA begin address
#define R16_TMR2_DMA_BEG    (*((PUINT16V)0x40002818)) // RW, TMR2 DMA begin address
#define R32_TMR2_DMA_END    (*((PUINT32V)0x4000281C)) // RW, TMR2 DMA end address
#define R16_TMR2_DMA_END    (*((PUINT16V)0x4000281C)) // RW, TMR2 DMA end address

/* Timer3 register */
#define R32_TMR3_CONTROL    (*((PUINT32V)0x40002C00)) // RW, TMR3 control
#define R8_TMR3_CTRL_MOD    (*((PUINT8V)0x40002C00))  // RW, TMR3 mode control
#define R8_TMR3_INTER_EN    (*((PUINT8V)0x40002C02))  // RW, TMR3 interrupt enable
#define R32_TMR3_STATUS     (*((PUINT32V)0x40002C04)) // RW, TMR3 status
#define R8_TMR3_INT_FLAG    (*((PUINT8V)0x40002C06))  // RW1, TMR3 interrupt flag
#define R8_TMR3_FIFO_COUNT  (*((PUINT8V)0x40002C07))  // RO, TMR3 FIFO count status
#define R32_TMR3_COUNT      (*((PUINT32V)0x40002C08)) // RO, TMR3 current count
#define R16_TMR3_COUNT      (*((PUINT16V)0x40002C08)) // RO, TMR3 current count
#define R8_TMR3_COUNT       (*((PUINT8V)0x40002C08))  // RO, TMR3 current count
#define R32_TMR3_CNT_END    (*((PUINT32V)0x40002C0C)) // RW, TMR3 end count value, only low 26 bit
#define R32_TMR3_FIFO       (*((PUINT32V)0x40002C10)) // RO/WO, TMR3 FIFO register, only low 26 bit
#define R16_TMR3_FIFO       (*((PUINT16V)0x40002C10)) // RO/WO, TMR3 FIFO register
#define R8_TMR3_FIFO        (*((PUINT8V)0x40002C10))  // RO/WO, TMR3 FIFO register

/* Timer register address offset and bit define */
#define TMR_FIFO_SIZE       8                         // timer FIFO size (depth)
#define BA_TMR0             ((PUINT8V)0x40002000)     // point TMR0 base address
#define BA_TMR1             ((PUINT8V)0x40002400)     // point TMR1 base address
#define BA_TMR2             ((PUINT8V)0x40002800)     // point TMR2 base address
#define BA_TMR3             ((PUINT8V)0x40002C00)     // point TMR3 base address
#define TMR_CTRL_MOD        0
#define  RB_TMR_MODE_IN     0x01                      // RW, timer in mode: 0=timer/PWM, 1=capture/count
#define  RB_TMR_ALL_CLEAR   0x02                      // RW, force clear timer FIFO and count
#define  RB_TMR_COUNT_EN    0x04                      // RW, timer count enable
#define  RB_TMR_OUT_EN      0x08                      // RW, timer output enable
#define  RB_TMR_OUT_POLAR   0x10                      // RW, timer PWM output polarity: 0=default low and high action, 1=default high and low action
#define  RB_TMR_CAP_COUNT   0x10                      // RW, count sub-mode if RB_TMR_MODE_IN=1: 0=capture, 1=count
#define  RB_TMR_PWM_REPEAT  0xC0                      // RW, timer PWM repeat mode: 00=1, 01=4, 10=8, 11-16
#define  RB_TMR_CAP_EDGE    0xC0                      // RW, timer capture edge mode: 00=disable, 01=edge change, 10=fall to fall, 11-rise to rise
#define TMR_CTRL_DMA        1
#define  RB_TMR_DMA_ENABLE  0x01                      // RW, timer1/2 DMA enable
#define  RB_TMR_DMA_LOOP    0x04                      // RW, timer1/2 DMA address loop enable
#define TMR_INTER_EN        2
#define  RB_TMR_IE_CYC_END  0x01                      // RW, enable interrupt for timer capture count timeout or PWM cycle end
#define  RB_TMR_IE_DATA_ACT 0x02                      // RW, enable interrupt for timer capture input action or PWM trigger
#define  RB_TMR_IE_FIFO_HF  0x04                      // RW, enable interrupt for timer FIFO half (capture fifo >=4 or PWM fifo <=3)
#define  RB_TMR_IE_DMA_END  0x08                      // RW, enable interrupt for timer1/2 DMA completion
#define  RB_TMR_IE_FIFO_OV  0x10                      // RW, enable interrupt for timer FIFO overflow
#define TMR_INT_FLAG        6
#define  RB_TMR_IF_CYC_END  0x01                      // RW1, interrupt flag for timer capture count timeout or PWM cycle end
#define  RB_TMR_IF_DATA_ACT 0x02                      // RW1, interrupt flag for timer capture input action or PWM trigger
#define  RB_TMR_IF_FIFO_HF  0x04                      // RW1, interrupt flag for timer FIFO half (capture fifo >=4 or PWM fifo <=3)
#define  RB_TMR_IF_DMA_END  0x08                      // RW1, interrupt flag for timer1/2 DMA completion
#define  RB_TMR_IF_FIFO_OV  0x10                      // RW1, interrupt flag for timer FIFO overflow
#define TMR_FIFO_COUNT      7
#define TMR_COUNT           0x08
#define TMR_CNT_END         0x0C
#define TMR_FIFO            0x10
#define TMR_DMA_NOW         0x14
#define TMR_DMA_BEG         0x18
#define TMR_DMA_END         0x1C

/* UART0 register */
#define R32_UART0_CTRL      (*((PUINT32V)0x40003000)) // RW, UART0 control
#define R8_UART0_MCR        (*((PUINT8V)0x40003000))  // RW, UART0 modem control
#define R8_UART0_IER        (*((PUINT8V)0x40003001))  // RW, UART0 interrupt enable
#define R8_UART0_FCR        (*((PUINT8V)0x40003002))  // RW, UART0 FIFO control
#define R8_UART0_LCR        (*((PUINT8V)0x40003003))  // RW, UART0 line control
#define R32_UART0_STAT      (*((PUINT32V)0x40003004)) // RO, UART0 status
#define R8_UART0_IIR        (*((PUINT8V)0x40003004))  // RO, UART0 interrupt identification
#define R8_UART0_LSR        (*((PUINT8V)0x40003005))  // RO, UART0 line status
#define R8_UART0_MSR        (*((PUINT8V)0x40003006))  // RO, UART0 modem status
#define R32_UART0_FIFO      (*((PUINT32V)0x40003008)) // RW, UART0 data or FIFO port
#define R8_UART0_RBR        (*((PUINT8V)0x40003008))  // RO, UART0 receiver buffer, receiving byte
#define R8_UART0_THR        (*((PUINT8V)0x40003008))  // WO, UART0 transmitter holding, transmittal byte
#define R8_UART0_RFC        (*((PUINT8V)0x4000300A))  // RO, UART0 receiver FIFO count
#define R8_UART0_TFC        (*((PUINT8V)0x4000300B))  // RO, UART0 transmitter FIFO count
#define R32_UART0_SETUP     (*((PUINT32V)0x4000300C)) // RW, UART0 setup
#define R16_UART0_DL        (*((PUINT16V)0x4000300C)) // RW, UART0 divisor latch
#define R8_UART0_DLL        (*((PUINT8V)0x4000300C))  // RW, UART0 divisor latch LSB byte
#define R8_UART0_DLM        (*((PUINT8V)0x4000300D))  // RW, UART0 divisor latch MSB byte
#define R8_UART0_DIV        (*((PUINT8V)0x4000300E))  // RW, UART0 pre-divisor latch byte, only low 7 bit, from 1 to 0/128
#define R8_UART0_ADR        (*((PUINT8V)0x4000300F))  // RW, UART0 slave address: 0xFF=disable, other=enable

/* UART1 register */
#define R32_UART1_CTRL      (*((PUINT32V)0x40003400)) // RW, UART1 control
#define R8_UART1_MCR        (*((PUINT8V)0x40003400))  // RW, UART1 modem control
#define R8_UART1_IER        (*((PUINT8V)0x40003401))  // RW, UART1 interrupt enable
#define R8_UART1_FCR        (*((PUINT8V)0x40003402))  // RW, UART1 FIFO control
#define R8_UART1_LCR        (*((PUINT8V)0x40003403))  // RW, UART1 line control
#define R32_UART1_STAT      (*((PUINT32V)0x40003404)) // RO, UART1 status
#define R8_UART1_IIR        (*((PUINT8V)0x40003404))  // RO, UART1 interrupt identification
#define R8_UART1_LSR        (*((PUINT8V)0x40003405))  // RO, UART1 line status
#define R32_UART1_FIFO      (*((PUINT32V)0x40003408)) // RW, UART1 data or FIFO port
#define R8_UART1_RBR        (*((PUINT8V)0x40003408))  // RO, UART1 receiver buffer, receiving byte
#define R8_UART1_THR        (*((PUINT8V)0x40003408))  // WO, UART1 transmitter holding, transmittal byte
#define R8_UART1_RFC        (*((PUINT8V)0x4000340A))  // RO, UART1 receiver FIFO count
#define R8_UART1_TFC        (*((PUINT8V)0x4000340B))  // RO, UART1 transmitter FIFO count
#define R32_UART1_SETUP     (*((PUINT32V)0x4000340C)) // RW, UART1 setup
#define R16_UART1_DL        (*((PUINT16V)0x4000340C)) // RW, UART1 divisor latch
#define R8_UART1_DLL        (*((PUINT8V)0x4000340C))  // RW, UART1 divisor latch LSB byte
#define R8_UART1_DLM        (*((PUINT8V)0x4000340D))  // RW, UART1 divisor latch MSB byte
#define R8_UART1_DIV        (*((PUINT8V)0x4000340E))  // RW, UART1 pre-divisor latch byte, only low 7 bit, from 1 to 0/128

/* UART2 register */
#define R32_UART2_CTRL      (*((PUINT32V)0x40003800)) // RW, UART2 control
#define R8_UART2_MCR        (*((PUINT8V)0x40003800))  // RW, UART2 modem control
#define R8_UART2_IER        (*((PUINT8V)0x40003801))  // RW, UART2 interrupt enable
#define R8_UART2_FCR        (*((PUINT8V)0x40003802))  // RW, UART2 FIFO control
#define R8_UART2_LCR        (*((PUINT8V)0x40003803))  // RW, UART2 line control
#define R32_UART2_STAT      (*((PUINT32V)0x40003804)) // RO, UART2 status
#define R8_UART2_IIR        (*((PUINT8V)0x40003804))  // RO, UART2 interrupt identification
#define R8_UART2_LSR        (*((PUINT8V)0x40003805))  // RO, UART2 line status
#define R32_UART2_FIFO      (*((PUINT32V)0x40003808)) // RW, UART2 data or FIFO port
#define R8_UART2_RBR        (*((PUINT8V)0x40003808))  // RO, UART2 receiver buffer, receiving byte
#define R8_UART2_THR        (*((PUINT8V)0x40003808))  // WO, UART2 transmitter holding, transmittal byte
#define R8_UART2_RFC        (*((PUINT8V)0x4000380A))  // RO, UART2 receiver FIFO count
#define R8_UART2_TFC        (*((PUINT8V)0x4000380B))  // RO, UART2 transmitter FIFO count
#define R32_UART2_SETUP     (*((PUINT32V)0x4000380C)) // RW, UART2 setup
#define R16_UART2_DL        (*((PUINT16V)0x4000380C)) // RW, UART2 divisor latch
#define R8_UART2_DLL        (*((PUINT8V)0x4000380C))  // RW, UART2 divisor latch LSB byte
#define R8_UART2_DLM        (*((PUINT8V)0x4000380D))  // RW, UART2 divisor latch MSB byte
#define R8_UART2_DIV        (*((PUINT8V)0x4000380E))  // RW, UART2 pre-divisor latch byte, only low 7 bit, from 1 to 0/128

/* UART3 register */
#define R32_UART3_CTRL      (*((PUINT32V)0x40003C00)) // RW, UART3 control
#define R8_UART3_MCR        (*((PUINT8V)0x40003C00))  // RW, UART3 modem control
#define R8_UART3_IER        (*((PUINT8V)0x40003C01))  // RW, UART3 interrupt enable
#define R8_UART3_FCR        (*((PUINT8V)0x40003C02))  // RW, UART3 FIFO control
#define R8_UART3_LCR        (*((PUINT8V)0x40003C03))  // RW, UART3 line control
#define R32_UART3_STAT      (*((PUINT32V)0x40003C04)) // RO, UART3 status
#define R8_UART3_IIR        (*((PUINT8V)0x40003C04))  // RO, UART3 interrupt identification
#define R8_UART3_LSR        (*((PUINT8V)0x40003C05))  // RO, UART3 line status
#define R32_UART3_FIFO      (*((PUINT32V)0x40003C08)) // RW, UART3 data or FIFO port
#define R8_UART3_RBR        (*((PUINT8V)0x40003C08))  // RO, UART3 receiver buffer, receiving byte
#define R8_UART3_THR        (*((PUINT8V)0x40003C08))  // WO, UART3 transmitter holding, transmittal byte
#define R8_UART3_RFC        (*((PUINT8V)0x40003C0A))  // RO, UART3 receiver FIFO count
#define R8_UART3_TFC        (*((PUINT8V)0x40003C0B))  // RO, UART3 transmitter FIFO count
#define R32_UART3_SETUP     (*((PUINT32V)0x40003C0C)) // RW, UART3 setup
#define R16_UART3_DL        (*((PUINT16V)0x40003C0C)) // RW, UART3 divisor latch
#define R8_UART3_DLL        (*((PUINT8V)0x40003C0C))  // RW, UART3 divisor latch LSB byte
#define R8_UART3_DLM        (*((PUINT8V)0x40003C0D))  // RW, UART3 divisor latch MSB byte
#define R8_UART3_DIV        (*((PUINT8V)0x40003C0E))  // RW, UART3 pre-divisor latch byte, only low 7 bit, from 1 to 0/128

/* UART register address offset and bit define */
#define UART_FIFO_SIZE      8                         // UART FIFO size (depth)
#define UART_RECV_RDY_SZ    7                         // the max FIFO trigger level for UART receiver data available
#define BA_UART0            ((PUINT8V)0x40003000)     // point UART0 base address
#define BA_UART1            ((PUINT8V)0x40003400)     // point UART1 base address
#define BA_UART2            ((PUINT8V)0x40003800)     // point UART2 base address
#define BA_UART3            ((PUINT8V)0x40003C00)     // point UART3 base address
#define UART_MCR            0
#define  RB_MCR_DTR         0x01                      // RW, UART0 control DTR
#define  RB_MCR_RTS         0x02                      // RW, UART0 control RTS
#define  RB_MCR_OUT1        0x04                      // RW, UART0 control OUT1
#define  RB_MCR_OUT2        0x08                      // RW, UART control OUT2
#define  RB_MCR_INT_OE      0x08                      // RW, UART interrupt output enable
#define  RB_MCR_LOOP        0x10                      // RW, UART0 enable local loop back
#define  RB_MCR_AU_FLOW_EN  0x20                      // RW, UART0 enable autoflow control
#define  RB_MCR_TNOW        0x40                      // RW, UART0 enable TNOW output on DTR pin
#define  RB_MCR_HALF        0x80                      // RW, UART0 enable half-duplex
#define UART_IER            1
#define  RB_IER_RECV_RDY    0x01                      // RW, UART interrupt enable for receiver data ready
#define  RB_IER_THR_EMPTY   0x02                      // RW, UART interrupt enable for THR empty
#define  RB_IER_LINE_STAT   0x04                      // RW, UART interrupt enable for receiver line status
#define  RB_IER_MODEM_CHG   0x08                      // RW, UART0 interrupt enable for modem status change
#define  RB_IER_DTR_EN      0x10                      // RW, UART0 DTR/TNOW output pin enable
#define  RB_IER_RTS_EN      0x20                      // RW, UART0 RTS output pin enable
#define  RB_IER_TXD_EN      0x40                      // RW, UART TXD pin enable
#define  RB_IER_RESET       0x80                      // WZ, UART software reset control, high action, auto clear
#define UART_FCR            2
#define  RB_FCR_FIFO_EN     0x01                      // RW, UART FIFO enable
#define  RB_FCR_RX_FIFO_CLR 0x02                      // WZ, clear UART receiver FIFO, high action, auto clear
#define  RB_FCR_TX_FIFO_CLR 0x04                      // WZ, clear UART transmitter FIFO, high action, auto clear
#define  RB_FCR_FIFO_TRIG   0xC0                      // RW, UART receiver FIFO trigger level: 00-1byte, 01-2bytes, 10-4bytes, 11-7bytes
#define UART_LCR            3
#define  RB_LCR_WORD_SZ     0x03                      // RW, UART word bit length: 00-5bit, 01-6bit, 10-7bit, 11-8bit
#define  RB_LCR_STOP_BIT    0x04                      // RW, UART stop bit length: 0-1bit, 1-2bit
#define  RB_LCR_PAR_EN      0x08                      // RW, UART parity enable
#define  RB_LCR_PAR_MOD     0x30                      // RW, UART parity mode: 00-odd, 01-even, 10-mark, 11-space
#define  RB_LCR_BREAK_EN    0x40                      // RW, UART break control enable
#define  RB_LCR_DLAB        0x80                      // RW, UART reserved bit
#define  RB_LCR_GP_BIT      0x80                      // RW, UART general purpose bit
#define UART_IIR            4
#define  RB_IIR_NO_INT      0x01                      // RO, UART no interrupt flag: 0=interrupt action, 1=no interrupt
#define  RB_IIR_INT_MASK    0x0F                      // RO, UART interrupt flag bit mask
#define  RB_IIR_FIFO_ID     0xC0                      // RO, UART FIFO enabled flag
#define UART_LSR            5
#define  RB_LSR_DATA_RDY    0x01                      // RO, UART receiver fifo data ready status
#define  RB_LSR_OVER_ERR    0x02                      // RZ, UART receiver overrun error
#define  RB_LSR_PAR_ERR     0x04                      // RZ, UART receiver parity error
#define  RB_LSR_FRAME_ERR   0x08                      // RZ, UART receiver frame error
#define  RB_LSR_BREAK_ERR   0x10                      // RZ, UART receiver break error
#define  RB_LSR_TX_FIFO_EMP 0x20                      // RO, UART transmitter fifo empty status
#define  RB_LSR_TX_ALL_EMP  0x40                      // RO, UART transmitter all empty status
#define  RB_LSR_ERR_RX_FIFO 0x80                      // RO, indicate error in UART receiver fifo
#define UART_MSR            6
#define  RB_MSR_CTS_CHG     0x01                      // RZ, UART0 CTS changed status, high action
#define  RB_MSR_DSR_CHG     0x02                      // RZ, UART0 DSR changed status, high action
#define  RB_MSR_RI_CHG      0x04                      // RZ, UART0 RI changed status, high action
#define  RB_MSR_DCD_CHG     0x08                      // RZ, UART0 DCD changed status, high action
#define  RB_MSR_CTS         0x10                      // RO, UART0 CTS action status
#define  RB_MSR_DSR         0x20                      // RO, UART0 DSR action status
#define  RB_MSR_RI          0x40                      // RO, UART0 RI action status
#define  RB_MSR_DCD         0x80                      // RO, UART0 DCD action status
#define UART_RBR            8
#define UART_THR            8
#define UART_RFC            0x0A
#define UART_TFC            0x0B
#define UART_DLL            0x0C
#define UART_DLM            0x0D
#define UART_DIV            0x0E
#define UART_ADR            0x0F

/* UART interrupt identification values for IIR bits 3:0 */
#define UART_II_SLV_ADDR    0x0E                      // RO, UART0 slave address match
#define UART_II_LINE_STAT   0x06                      // RO, UART interrupt by receiver line status
#define UART_II_RECV_RDY    0x04                      // RO, UART interrupt by receiver data available
#define UART_II_RECV_TOUT   0x0C                      // RO, UART interrupt by receiver fifo timeout
#define UART_II_THR_EMPTY   0x02                      // RO, UART interrupt by THR empty
#define UART_II_MODEM_CHG   0x00                      // RO, UART0 interrupt by modem status change
#define UART_II_NO_INTER    0x01                      // RO, no UART interrupt is pending

/* SPI0 register */
#define R32_SPI0_CONTROL    (*((PUINT32V)0x40004000)) // RW, SPI0 control
#define R8_SPI0_CTRL_MOD    (*((PUINT8V)0x40004000))  // RW, SPI0 mode control
#define R8_SPI0_CTRL_CFG    (*((PUINT8V)0x40004001))  // RW, SPI0 configuration control
#define R8_SPI0_INTER_EN    (*((PUINT8V)0x40004002))  // RW, SPI0 interrupt enable
#define R8_SPI0_CLOCK_DIV   (*((PUINT8V)0x40004003))  // RW, SPI0 master clock divisor
#define R8_SPI0_SLAVE_PRE   (*((PUINT8V)0x40004003))  // RW, SPI0 slave preset value
#define R32_SPI0_STATUS     (*((PUINT32V)0x40004004)) // RW, SPI0 status
#define R8_SPI0_BUFFER      (*((PUINT8V)0x40004004))  // RO, SPI0 data buffer
#define R8_SPI0_RUN_FLAG    (*((PUINT8V)0x40004005))  // RO, SPI0 work flag
#define R8_SPI0_INT_FLAG    (*((PUINT8V)0x40004006))  // RW1, SPI0 interrupt flag
#define R8_SPI0_FIFO_COUNT  (*((PUINT8V)0x40004007))  // RO, SPI0 FIFO count status
#define R32_SPI0_TOTAL_CNT  (*((PUINT32V)0x4000400C)) // RW, SPI0 total byte count, only low 12 bit
#define R16_SPI0_TOTAL_CNT  (*((PUINT16V)0x4000400C)) // RW, SPI0 total byte count, only low 12 bit
#define R32_SPI0_FIFO       (*((PUINT32V)0x40004010)) // RW, SPI0 FIFO register
#define R8_SPI0_FIFO        (*((PUINT8V)0x40004010))  // RO/WO, SPI0 FIFO register
#define R8_SPI0_FIFO_COUNT1 (*((PUINT8V)0x40004013))  // RO, SPI0 FIFO count status
#define R32_SPI0_DMA_NOW    (*((PUINT32V)0x40004014)) // RW, SPI0 DMA current address
#define R16_SPI0_DMA_NOW    (*((PUINT16V)0x40004014)) // RW, SPI0 DMA current address
#define R32_SPI0_DMA_BEG    (*((PUINT32V)0x40004018)) // RW, SPI0 DMA begin address
#define R16_SPI0_DMA_BEG    (*((PUINT16V)0x40004018)) // RW, SPI0 DMA begin address
#define R32_SPI0_DMA_END    (*((PUINT32V)0x4000401C)) // RW, SPI0 DMA end address
#define R16_SPI0_DMA_END    (*((PUINT16V)0x4000401C)) // RW, SPI0 DMA end address

/* SPI1 register */
#define R32_SPI1_CONTROL    (*((PUINT32V)0x40004400)) // RW, SPI1 control
#define R8_SPI1_CTRL_MOD    (*((PUINT8V)0x40004400))  // RW, SPI1 mode control
#define R8_SPI1_CTRL_CFG    (*((PUINT8V)0x40004401))  // RW, SPI1 configuration control
#define R8_SPI1_INTER_EN    (*((PUINT8V)0x40004402))  // RW, SPI1 interrupt enable
#define R8_SPI1_CLOCK_DIV   (*((PUINT8V)0x40004403))  // RW, SPI1 master clock divisor
#define R32_SPI1_STATUS     (*((PUINT32V)0x40004404)) // RW, SPI1 status
#define R8_SPI1_BUFFER      (*((PUINT8V)0x40004404))  // RO, SPI1 data buffer
#define R8_SPI1_RUN_FLAG    (*((PUINT8V)0x40004405))  // RO, SPI1 work flag
#define R8_SPI1_INT_FLAG    (*((PUINT8V)0x40004406))  // RW1, SPI1 interrupt flag
#define R8_SPI1_FIFO_COUNT  (*((PUINT8V)0x40004407))  // RO, SPI1 FIFO count status
#define R32_SPI1_TOTAL_CNT  (*((PUINT32V)0x4000440C)) // RW, SPI1 total byte count, only low 12 bit
#define R16_SPI1_TOTAL_CNT  (*((PUINT16V)0x4000440C)) // RW, SPI1 total byte count, only low 12 bit
#define R32_SPI1_FIFO       (*((PUINT32V)0x40004410)) // RW, SPI1 FIFO register
#define R8_SPI1_FIFO        (*((PUINT8V)0x40004410))  // RO/WO, SPI1 FIFO register
#define R8_SPI1_FIFO_COUNT1 (*((PUINT8V)0x40004413))  // RO, SPI1 FIFO count status

/* SPI register address offset and bit define */
#define SPI_FIFO_SIZE       8                         // SPI FIFO size (depth)
#define BA_SPI0             ((PUINT8V)0x40004000)     // point SPI0 base address
#define BA_SPI1             ((PUINT8V)0x40004400)     // point SPI1 base address
#define SPI_CTRL_MOD        0
#define  RB_SPI_MODE_SLAVE  0x01                      // RW, SPI0 slave mode: 0=master/host, 1=slave/device
#define  RB_SPI_ALL_CLEAR   0x02                      // RW, force clear SPI FIFO and count
#define  RB_SPI_2WIRE_MOD   0x04                      // RW, SPI0 enable 2 wire mode for slave: 0=3wire(SCK0,MOSI,MISO), 1=2wire(SCK0,MISO=MXSX)
#define  RB_SPI_MST_SCK_MOD 0x08                      // RW, SPI master clock mode: 0=mode 0, 1=mode 3
#define  RB_SPI_SLV_CMD_MOD 0x08                      // RW, SPI0 slave command mode: 0=byte stream, 1=first byte command
#define  RB_SPI_FIFO_DIR    0x10                      // RW, SPI FIFO direction: 0=out(write @master mode), 1=in(read @master mode)
#define  RB_SPI_SCK_OE      0x20                      // RW, SPI SCK output enable
#define  RB_SPI_MOSI_OE     0x40                      // RW, SPI MOSI output enable
#define  RB_SPI1_SDO_OE     0x40                      // RW, SPI1 SDO output enable
#define  RB_SPI_MISO_OE     0x80                      // RW, SPI MISO output enable
#define  RB_SPI1_SDI_OE     0x80                      // RW, SPI1 SDI output enable, SPI1 enable 2 wire mode: 0=3wire(SCK1,SDO,SDI), 1=2wire(SCK1,SDI=SDX)
#define SPI_CTRL_CFG        1
#define  RB_SPI_DMA_ENABLE  0x01                      // RW, SPI0 DMA enable
#define  RB_SPI_DMA_LOOP    0x04                      // RW, SPI0 DMA address loop enable
#define  RB_SPI_AUTO_IF     0x10                      // RW, enable buffer/FIFO accessing to auto clear RB_SPI_IF_BYTE_END interrupt flag
#define  RB_SPI_BIT_ORDER   0x20                      // RW, SPI bit data order: 0=MSB first, 1=LSB first
#define  RB_SPI_MST_DLY_EN  0x40                      // RW, SPI master input delay enable
#define SPI_INTER_EN        2
#define  RB_SPI_IE_CNT_END  0x01                      // RW, enable interrupt for SPI total byte count end
#define  RB_SPI_IE_BYTE_END 0x02                      // RW, enable interrupt for SPI byte exchanged
#define  RB_SPI_IE_FIFO_HF  0x04                      // RW, enable interrupt for SPI FIFO half
#define  RB_SPI_IE_DMA_END  0x08                      // RW, enable interrupt for SPI0 DMA completion
#define  RB_SPI_IE_FIFO_OV  0x10                      // RW, enable interrupt for SPI0 FIFO overflow
#define  RB_SPI_IE_FST_BYTE 0x80                      // RW, enable interrupt for SPI0 slave mode first byte received
#define SPI_CLOCK_DIV       3
#define SPI_SLAVE_PRESET    3
#define SPI_BUFFER          4
#define SPI_RUN_FLAG        5
#define  RB_SPI_SLV_CMD_ACT 0x10                      // RO, SPI0 slave first byte / command flag
#define  RB_SPI_FIFO_READY  0x20                      // RO, SPI FIFO ready status
#define  RB_SPI_SLV_CS_LOAD 0x40                      // RO, SPI0 slave chip-select loading status
#define  RB_SPI_SLV_SELECT  0x80                      // RO, SPI0 slave selection status
#define SPI_INT_FLAG        6
#define  RB_SPI_IF_CNT_END  0x01                      // RW1, interrupt flag for SPI total byte count end
#define  RB_SPI_IF_BYTE_END 0x02                      // RW1, interrupt flag for SPI byte exchanged
#define  RB_SPI_IF_FIFO_HF  0x04                      // RW1, interrupt flag for SPI FIFO half (RB_SPI_FIFO_DIR ? >=4bytes : <4bytes)
#define  RB_SPI_IF_DMA_END  0x08                      // RW1, interrupt flag for SPI0 DMA completion
#define  RB_SPI_IF_FIFO_OV  0x10                      // RW1, interrupt flag for SPI0 FIFO overflow
#define  RB_SPI_FREE        0x40                      // RO, current SPI free status
#define  RB_SPI_IF_FST_BYTE 0x80                      // RW1, interrupt flag for SPI0 slave mode first byte received
#define SPI_FIFO_COUNT      7
#define SPI_TOTAL_CNT       0x0C
#define SPI_FIFO            0x10
#define SPI_DMA_NOW         0x14
#define SPI_DMA_BEG         0x18
#define SPI_DMA_END         0x1C

/* PWM4/5/6/7/8/9/10/11 register */
#define R32_PWM_CONTROL     (*((PUINT32V)0x40005000)) // RW, PWM control
#define R8_PWM_OUT_EN       (*((PUINT8V)0x40005000))  // RW, PWM output enable control
#define R8_PWM_POLAR        (*((PUINT8V)0x40005001))  // RW, PWM output polarity control
#define R8_PWM_CONFIG       (*((PUINT8V)0x40005002))  // RW, PWM configuration
#define R8_PWM_CLOCK_DIV    (*((PUINT8V)0x40005003))  // RW, PWM clock divisor
#define R32_PWM4_7_DATA     (*((PUINT32V)0x40005004)) // RW, PWM4-7 data holding
#define R8_PWM4_DATA        (*((PUINT8V)0x40005004))  // RW, PWM4 data holding
#define R8_PWM5_DATA        (*((PUINT8V)0x40005005))  // RW, PWM5 data holding
#define R8_PWM6_DATA        (*((PUINT8V)0x40005006))  // RW, PWM6 data holding
#define R8_PWM7_DATA        (*((PUINT8V)0x40005007))  // RW, PWM7 data holding
#define R32_PWM8_11_DATA    (*((PUINT32V)0x40005008)) // RW, PWM8-11 data holding
#define R8_PWM8_DATA        (*((PUINT8V)0x40005008))  // RW, PWM8 data holding
#define R8_PWM9_DATA        (*((PUINT8V)0x40005009))  // RW, PWM9 data holding
#define R8_PWM10_DATA       (*((PUINT8V)0x4000500A))  // RW, PWM10 data holding
#define R8_PWM11_DATA       (*((PUINT8V)0x4000500B))  // RW, PWM11 data holding

/* PWM4/5/6/7/8/9/10/11 register address offset and bit define */
#define BA_PWMX             ((PUINT8V)0x40005000)     // point PWM4/5/6/7/8/9/10/11 base address
#define PWM_OUT_EN          0
#define  RB_PWM4_OUT_EN     0x01                      // RW, PWM4 output enable
#define  RB_PWM5_OUT_EN     0x02                      // RW, PWM5 output enable
#define  RB_PWM6_OUT_EN     0x04                      // RW, PWM6 output enable
#define  RB_PWM7_OUT_EN     0x08                      // RW, PWM7 output enable
#define  RB_PWM8_OUT_EN     0x10                      // RW, PWM8 output enable
#define  RB_PWM9_OUT_EN     0x20                      // RW, PWM9 output enable
#define  RB_PWM10_OUT_EN    0x40                      // RW, PWM10 output enable
#define  RB_PWM11_OUT_EN    0x80                      // RW, PWM11 output enable
#define PWM_POLAR           1
#define  RB_PWM4_POLAR      0x01                      // RW, PWM4 output polarity: 0=default low and high action, 1=default high and low action
#define  RB_PWM5_POLAR      0x02                      // RW, PWM5 output polarity: 0=default low and high action, 1=default high and low action
#define  RB_PWM6_POLAR      0x04                      // RW, PWM6 output polarity: 0=default low and high action, 1=default high and low action
#define  RB_PWM7_POLAR      0x08                      // RW, PWM7 output polarity: 0=default low and high action, 1=default high and low action
#define  RB_PWM8_POLAR      0x10                      // RW, PWM8 output polarity: 0=default low and high action, 1=default high and low action
#define  RB_PWM9_POLAR      0x20                      // RW, PWM9 output polarity: 0=default low and high action, 1=default high and low action
#define  RB_PWM10_POLAR     0x40                      // RW, PWM10 output polarity: 0=default low and high action, 1=default high and low action
#define  RB_PWM11_POLAR     0x80                      // RW, PWM11 output polarity: 0=default low and high action, 1=default high and low action
#define PWM_CONFIG          2
#define  RB_PWM_CYCLE_SEL   0x01                      // RW, PWM cycle selection: 0=256/128/64/32 clocks, 1=255/127/63/31 clocks
#define  RB_PWM_STAG_ST     0x02                      // RO, PWM stagger cycle status
#define  RB_PWM_CYC_MOD     0x0c                      // RW, PWM data width mode: 00=8 bits data, 01=7 bits data, 10=6 bits data, 11=5 bits data
#define  RB_PWM4_5_STAG_EN  0x10                      // RW, PWM4/5 stagger output enable: 0=independent output, 1=stagger output
#define  RB_PWM6_7_STAG_EN  0x20                      // RW, PWM6/7 stagger output enable: 0=independent output, 1=stagger output
#define  RB_PWM8_9_STAG_EN  0x40                      // RW, PWM8/9 stagger output enable: 0=independent output, 1=stagger output
#define  RB_PWM10_11_STAG_EN 0x80                     // RW, PWM10/11 stagger output enable: 0=independent output, 1=stagger output
#define PWM_CLOCK_DIV       3
#define PWM4_DATA_HOLD      4
#define PWM5_DATA_HOLD      5
#define PWM6_DATA_HOLD      6
#define PWM7_DATA_HOLD      7
#define PWM8_DATA_HOLD      8
#define PWM9_DATA_HOLD      9
#define PWM10_DATA_HOLD     10
#define PWM11_DATA_HOLD     11

/* LED register */
#define R32_LED_CONTROL     (*((PUINT32V)0x40006400)) // RW, LED control
#define R8_LED_CTRL_MOD     (*((PUINT8V)0x40006400))  // RW, LED mode control
#define R8_LED_CLOCK_DIV    (*((PUINT8V)0x40006401))  // RW, LED serial clock divisor
#define R8_LED_STATUS       (*((PUINT8V)0x40006404))  // RO, LED status
#define R32_LED_FIFO        (*((PUINT32V)0x40006408)) // WO, LED FIFO register, width is half-word, only low 16 bit
#define R16_LED_FIFO        (*((PUINT16V)0x40006408)) // WO, LED FIFO register, width is half-word
#define R32_LED_DMA_CNT     (*((PUINT32V)0x40006410)) // RW, LED DMA main buffer remainder half-word count, exclude auxiliary buffer, automatic decreasing after DMA, only low 12 bit
#define R16_LED_DMA_CNT     (*((PUINT16V)0x40006410)) // RW, LED DMA main buffer remainder half-word count, exclude auxiliary buffer, automatic decreasing after DMA, only low 12 bit
#define R32_LED_DMA_MAIN    (*((PUINT32V)0x40006414)) // RW, LED main buffer DMA begin & current address, automatic increasing after DMA
#define R16_LED_DMA_MAIN    (*((PUINT16V)0x40006414)) // RW, LED main buffer DMA begin & current address, automatic increasing after DMA
#define R32_LED_DMA_AUX     (*((PUINT32V)0x40006418)) // RW, LED auxiliary buffer DMA begin & current address, automatic increasing after DMA
#define R16_LED_DMA_AUX     (*((PUINT16V)0x40006418)) // RW, LED auxiliary buffer DMA begin & current address, automatic increasing after DMA

/* LED register address offset and bit define */
#define LED_FIFO_SIZE       2                         // LED FIFO size (depth), width is half-word
#define BA_LED              ((PUINT8V)0x40006400)     // point LED base address
#define LED_CTRL_MOD        0
#define  RB_LED_BIT_ORDER   0x01                      // RW, LED bit data order: 0=LSB first, 1=MSB first
#define  RB_LED_ALL_CLEAR   0x02                      // RW, force clear LED FIFO and count
#define  RB_LED_OUT_POLAR   0x04                      // RW, LED output polarity: 0=pass, 1=invert
#define  RB_LED_OUT_EN      0x08                      // RW, LED output enable
#define  RB_LED_DMA_EN      0x10                      // RW, LED DMA enable and DMA interrupt enable
#define  RB_LED_IE_FIFO     0x20                      // RW, enable interrupt for LED FIFO <=2
#define  RB_LED_CHAN_MOD    0xC0                      // RW, LED channel mode: 00=LED0, 01=LED0/1, 10=LED0~3, 11=LED0~3 and LED2/3 from auxiliary buffer
// RB_LED_CHAN_MOD: LED channel mode
//   00: single channel output, LED0
//   01: dual channels output, LED0/1
//   10: 4 channels output, LED0~3
//   11: 4 channels output and LED2/3 from aux buffer, LED0~3
#define LED_CLOCK_DIV       1
#define LED_STATUS          4
#define  RB_LED_FIFO_COUNT  0x07                      // RO, LED FIFO byte count status, must divided by 2 for width half-word
#define  RB_LED_CLOCK       0x10                      // RO, current LED clock level
#define  RB_LED_IF_FIFO     0x20                      // RW1, interrupt flag for LED FIFO <=2, cleared by RW1 or write R32/R16_LED_FIFO
#define  RB_LED_FIFO_EMPTY  0x40                      // RO: indicate FIFO empty status
#define  RB_LED_IF_DMA_END  0x80                      // RW1, interrupt flag for LED DMA completion, cleared by RW1 or write R32/R16_LED_DMA_CNT
#define LED_FIFO            8
#define LED_DMA_CNT         0x10
#define LED_DMA_BEG         0x14
#define LED_DMA_END         0x18

/* LCD register */
#define R32_LCD_CONTROL     (*((PUINT32V)(0x40006000)))
#define R8_LCD_CTRL_MOD     (*((PUINT8V)(0x40006000)))
#define  RB_SYS_POWER_ON    0x01                      // RW, LCD digital system enable
#define  RB_LCD_POWER_ON    0x02                      // RW, LCD analog system enable
#define  RB_LCD_BIAS        0x04                      // RW, LCD bias select:  0=1/2 bias,  1=1/3 bias
#define  RB_LCD_DUTY        0x18                      // RW, LCD duty select:  00=1/2 duty,  01=1/3 duty,  10=1/4 duty
#define  RB_LCD_SCAN_CLK    0x60                      // RW, LCD scan clock select: 00=256Hz, 01=512Hz, 10=1KHz, 11=128Hz
#define  RB_LCD_V_SEL       0x80                      // RW, LCD drive voltage：0=VIO33*100%(3.3V),1=VIO33*76%(2.5V)

#define R32_LCD_RAM0        (*((PUINT32V)(0x40006004))) // RW, LCD driver data0, address 0-3
#define R32_LCD_RAM1        (*((PUINT32V)(0x40006008))) // RW, LCD driver data1, address 4-7
#define R32_LCD_RAM2        (*((PUINT32V)(0x4000600C))) // RW, LCD driver data2, address 8-12


/* Address space define */
#define BA_CODE             ((PUINT32)0x00000000)     // point code base address
#define SZ_CODE             0x00040000                // code size
#define BA_SFR              ((PUINT32)0x40000000)     // point SFR base address
#define SZ_SFR              0x00010000                // SFR size
#define BA_RAM              ((PUINT32)0x20000000)     // point RAM base address
#define SZ_RAM              0x00008000                // RAM size
#define BA_PPB              ((PUINT32)0xE0000000)     // point PPB base address
#define SZ_PPB              0x00010000                // PPB size

/* Special Program Space */
#define DATA_FLASH_ADDR     0x3E800                   // start address of Data-Flash
#define DATA_FLASH_SIZE     0x0800                    // size of Data-Flash
#define BOOT_LOAD_ADDR      0x3F000                   // start address of boot loader program
#define BOOT_LOAD_SIZE      0x1000                    // size of boot loader program
#define BOOT_LOAD_CFG       0x40000                   // start address of configuration information for boot loader program
#define ROM_CFG_ADDR        0x40010                   // chip configuration information address

/*----- Reference Information --------------------------------------------*/
#define ID_CH579            0x79                      // chip ID

/* Interrupt routine address and interrupt number */
#define INT_ID_TMR0         0                         // interrupt number for Timer0
#define INT_ID_GPIO         1                         // interrupt number for GPIO
#define INT_ID_SLAVE        2                         // interrupt number for Slave
#define INT_ID_SPI0         3                         // interrupt number for SPI0
#define INT_ID_BLEB         4                         // interrupt number for BLEBB
#define INT_ID_BLEL         5                         // interrupt number for BLELLE
#define INT_ID_USB          6                         // interrupt number for USB
#define INT_ID_ETH          7                         // interrupt number for ETH
#define INT_ID_TMR1         8                         // interrupt number for Timer1
#define INT_ID_TMR2         9                         // interrupt number for Timer2
#define INT_ID_UART0        10                        // interrupt number for UART0
#define INT_ID_UART1        11                        // interrupt number for UART1
#define INT_ID_RTC          12                        // interrupt number for RTC
#define INT_ID_ADC          13                        // interrupt number for ADC and TouchKey
#define INT_ID_SPI1         14                        // interrupt number for SPI1
#define INT_ID_LED          15                        // interrupt number for LED
#define INT_ID_TMR3         16                        // interrupt number for Timer3
#define INT_ID_UART2        17                        // interrupt number for UART2
#define INT_ID_UART3        18                        // interrupt number for UART3
#define INT_ID_WDOG_BAT     19                        // interrupt number for Watch-Dog timer and Battery low voltage
#define INT_VEC_ENTRY_SZ    4                         // size of each interrupt vector entry
#define INT_ADDR_TMR0       (INT_ID_TMR0*INT_VEC_ENTRY_SZ+64)    // interrupt vector address for Timer0
#define INT_ADDR_GPIO       (INT_ID_GPIO*INT_VEC_ENTRY_SZ+64)    // interrupt vector address for GPIO
#define INT_ADDR_SLAVE      (INT_ID_SLAVE*INT_VEC_ENTRY_SZ+64)   // interrupt vector address for Slave
#define INT_ADDR_SPI0       (INT_ID_SPI0*INT_VEC_ENTRY_SZ+64)    // interrupt vector address for SPI0
#define INT_ADDR_BLEB       (INT_ID_BLEB*INT_VEC_ENTRY_SZ+64)    // interrupt vector address for BLEBB
#define INT_ADDR_BLEL       (INT_ID_BLEL*INT_VEC_ENTRY_SZ+64)    // interrupt vector address for BLELLE
#define INT_ADDR_USB        (INT_ID_USB*INT_VEC_ENTRY_SZ+64)     // interrupt vector address for USB
#define INT_ADDR_ETH        (INT_ID_ETH*INT_VEC_ENTRY_SZ+64)     // interrupt vector address for ETH
#define INT_ADDR_TMR1       (INT_ID_TMR1*INT_VEC_ENTRY_SZ+64)    // interrupt vector address for Timer1
#define INT_ADDR_TMR2       (INT_ID_TMR2*INT_VEC_ENTRY_SZ+64)    // interrupt vector address for Timer2
#define INT_ADDR_UART0      (INT_ID_UART0*INT_VEC_ENTRY_SZ+64)   // interrupt vector address for UART0
#define INT_ADDR_UART1      (INT_ID_UART1*INT_VEC_ENTRY_SZ+64)   // interrupt vector address for UART1
#define INT_ADDR_RTC        (INT_ID_RTC*INT_VEC_ENTRY_SZ+64)     // interrupt vector address for RTC
#define INT_ADDR_AD         (INT_ID_ADC*INT_VEC_ENTRY_SZ+64)     // interrupt vector address for ADC and TouchKey
#define INT_ADDR_SPI1       (INT_ID_SPI1*INT_VEC_ENTRY_SZ+64)    // interrupt vector address for SPI1
#define INT_ADDR_LED        (INT_ID_LED*INT_VEC_ENTRY_SZ+64)     // interrupt vector address for LED
#define INT_ADDR_Timer3     (INT_ID_Timer3*INT_VEC_ENTRY_SZ+64)  // interrupt vector address for Timer3
#define INT_ADDR_UART2      (INT_ID_UART2*INT_VEC_ENTRY_SZ+64)   // interrupt vector address for UART2
#define INT_ADDR_UART3      (INT_ID_UART3*INT_VEC_ENTRY_SZ+64)   // interrupt vector address for UART3
#define INT_ADDR_WDOG_BAT   (INT_ID_WDOG_BAT*INT_VEC_ENTRY_SZ+64) // interrupt vector address for Watch-Dog timer and Battery low voltage

#ifndef TABLE_IRQN
#define __NVIC_PRIO_BITS          2 /*!< uses 2 Bits for the Priority Levels    */
#define __Vendor_SysTickConfig    0 /*!< Set to 1 if different SysTick Config is used */
typedef enum IRQn
{
/* -------------------  Cortex-M0 Processor Exceptions Numbers  ------------------- */
  NonMaskableInt_IRQn          = -14,      /*!<  2 Non Maskable Interrupt          */
  HardFault_IRQn               = -13,      /*!<  3 HardFault Interrupt             */
  SVCall_IRQn                  =  -5,      /*!< 11 SV Call Interrupt               */
  PendSV_IRQn                  =  -2,      /*!< 14 Pend SV Interrupt               */
  SysTick_IRQn                 =  -1,      /*!< 15 System Tick Interrupt           */
/* ----------------------  ARMCM0 Specific Interrupt Numbers  --------------------- */
  TMR0_IRQn                    =   0,      /*!< Timer0 Interrupt                    */
  GPIO_IRQn                    =   1,      /*!< GPIO A/B Interrupt                  */
  SLAVE_IRQn                   =   2,      /*!< Slave parallel port Interrupt       */
  SPI0_IRQn                    =   3,      /*!< SPI0 Interrupt                      */
  BLEB_IRQn                    =   4,      /*!< BB  Interrupt                       */
  BLEL_IRQn                    =   5,      /*!< LLE Interrupt                       */
  USB_IRQn                     =   6,      /*!< USB Interrupt                       */
  ETH_IRQn                     =   7,      /*!< Ethernet Interrupt                  */
  TMR1_IRQn                    =   8,      /*!< Timer1 Interrupt                    */
  TMR2_IRQn                    =   9,      /*!< Timer2 Interrupt                    */
  UART0_IRQn                   =  10,      /*!< UART0 Interrupt                     */
  UART1_IRQn                   =  11,      /*!< UART1 Interrupt                     */
  RTC_IRQn                     =  12,      /*!< Real Time Clock Interrupt           */
  ADC_IRQn                     =  13,      /*!< ADC Interrupt                       */
  SPI1_IRQn                    =  14,      /*!< SPI1 Interrupt                      */
  LED_IRQn                     =  15,      /*!< LED control Interrupt               */
  TMR3_IRQn                    =  16,      /*!< Timer3 Interrupt                    */
  UART2_IRQn                   =  17,      /*!< UART2 Interrupt                     */
  UART3_IRQn                   =  18,      /*!< UART3 Interrupt                     */
  WDOG_BAT_IRQn                =  19,      /*!< Watch Dog Interrupt                 */
} IRQn_Type;
#endif


#ifdef __cplusplus
}
#endif

#endif  // __CH579SFR_H__


#ifndef __CH579ETHSFR_H__
#define __CH579ETHSFR_H__

#ifdef __cplusplus
extern "C" {
#endif

/******************************************************************************/
/*                       ETH  Peripheral memory map                              */
/******************************************************************************/
/* ETH addresses
//      ETH:     +9000H - 93FFH                                                    */
#define ETH_BASE_ADDR           (0x40009000)

/* ETH register */
#define R8_ETH_EIE              (*((PUINT8V)(0x40009003))) /* 中断使能寄存器 */
#define  RB_ETH_EIE_INTIE       0x80                  /* RW 中断使能 */
#define  RB_ETH_EIE_RXIE        0x40                  /* RW 接收完成中断使能 */
#define  RB_ETH_EIE_LINKIE      0x10                  /* RW Link 变化中断使能 */
#define  RB_ETH_EIE_TXIE        0x08                  /* RW 发送完成中断使能 */
#define  RB_ETH_EIE_R_EN50      0x04                  /* RW TX 50Ω电阻调节。1：片内 50Ω连接 0：片内 50Ω断开 */
#define  RB_ETH_EIE_TXERIE      0x02                  /* RW 发送错误中断使能 */
#define  RB_ETH_EIE_RXERIE      0x01                  /* RW1 接收错误标志 */
#define R32_ETH_CON             (*((PUINT32V)(0x40009004)))
#define R8_ETH_EIR              (*((PUINT8V)(0x40009004))) /* 中断标志寄存器 */
#define  RB_ETH_EIR_RXIF        0x40                  /* RW1 接收完成标志 */
#define  RB_ETH_EIR_LINKIF      0x10                  /* RW1 Link 变化标志 */
#define  RB_ETH_EIR_TXIF        0x08                  /* RW1 发送完成标志 */
#define  RB_ETH_EIR_TXERIF      0x02                  /* RW1 发送错误标志 */
#define  RB_ETH_EIR_RXERIF      0x01
#define R8_ETH_ESTAT            (*((PUINT8V)(0x40009005))) /* 状态寄存器 */
#define  RB_ETH_ESTAT_INT       0x80                  /* RW1 中断 */
#define  RB_ETH_ESTAT_BUFER     0x40                  /* RW1 Buffer 错误，理论上 mcu 主频太低才会发生 */
#define  RB_ETH_ESTAT_RXCRCER   0x20                  /* RO 接收 crc 出错 */
#define  RB_ETH_ESTAT_RXNIBBLE  0x10                  /* RO 接收 nibble 错误 */
#define  RB_ETH_ESTAT_RXMORE    0x08                  /* RO 接收超过最大数据包 */
#define  RB_ETH_ESTAT_RXBUSY    0x04                  /* RO 接收进行中 */
#define  RB_ETH_ESTAT_TXABRT    0x02                  /* RO 发送被 mcu 打断 */
#define R8_ETH_ECON2            (*((PUINT8V)(0x40009006))) /* ETH PHY模拟模块控制寄存器 */
#define  RB_ETH_ECON2_RX        0x0E                  /* 必须写入011 */
#define  RB_ETH_ECON2_TX        0x01
#define  RB_ETH_ECON2_MUST      0x06                  /* 必须写入011 */
#define R8_ETH_ECON1            (*((PUINT8V)(0x40009007))) /* 收发控制寄存器 */
#define  RB_ETH_ECON1_TXRST     0x80                  /* RW 发送模块复位 */
#define  RB_ETH_ECON1_RXRST     0x40                  /* RW 接收模块复位 */
#define  RB_ETH_ECON1_TXRTS     0x08                  /* RW 发送开始，发送完成后自动清零，如主动清零会使发送错误标志TXERIF和TXABRT变1 */
#define  RB_ETH_ECON1_RXEN      0x04                  /* RW 接收使能，清零时如正在接受则错误标志RXERIF变1 */

#define R32_ETH_TX              (*((PUINT32V)(0x40009008))) /* 发送控制 */
#define R16_ETH_ETXST           (*((PUINT16V)(0x40009008))) /* RW 发送 DMA 缓冲区起始地址 */
#define R16_ETH_ETXLN           (*((PUINT16V)(0x4000900A))) /* RW 发送长度 */
#define R32_ETH_RX              (*((PUINT32V)(0x4000900C))) /* 接收控制 */
#define R16_ETH_ERXST           (*((PUINT16V)(0x4000900C))) /* RW 接收 DMA 缓冲区起始地址 */
#define R16_ETH_ERXLN           (*((PUINT16V)(0x4000900E))) /* RO 接收长度 */

#define R32_ETH_HTL             (*((PUINT32V)(0x40009010)))
#define R8_ETH_EHT0             (*((PUINT8V)(0x40009010))) /* RW Hash Table Byte0 */
#define R8_ETH_EHT1             (*((PUINT8V)(0x40009011))) /* RW Hash Table Byte1 */
#define R8_ETH_EHT2             (*((PUINT8V)(0x40009012))) /* RW Hash Table Byte2 */
#define R8_ETH_EHT3             (*((PUINT8V)(0x40009013))) /* RW Hash Table Byte3 */
#define R32_ETH_HTH             (*((PUINT32V)(0x40009014)))
#define R8_ETH_EHT4             (*((PUINT8V)(0x40009014))) /* RW Hash Table Byte4 */
#define R8_ETH_EHT5             (*((PUINT8V)(0x40009015))) /* RW Hash Table Byte5 */
#define R8_ETH_EHT6             (*((PUINT8V)(0x40009016))) /* RW Hash Table Byte6 */
#define R8_ETH_EHT7             (*((PUINT8V)(0x40009017))) /* RW Hash Table Byte7 */

#define R32_ETH_MACON           (*((PUINT32V)(0x40009018)))
#define R8_ETH_ERXFCON          (*((PUINT8V)(0x40009018))) /* 接收包过滤控制寄存器 */
#define  RB_ETH_ERXFCON_UCEN    0x80                  /* RW 0=不启用该过滤条件，1=当ANDOR=1，目标地址不匹配将被过滤，当ANDOR=0，目标地址匹配将被接收 */
#define  RB_ETH_ERXFCON_ANDOR   0x40                  /* RW 1=AND，所有过滤条件都满足包才被接收 0=OR，任一过滤条件满足包均被接收 */
#define  RB_ETH_ERXFCON_CRCEN   0x20                  /* RW 0=不启用该过滤条件，1=当ANDOR=1，CRC校验错将被过滤，当ANDOR=0，CRC校验正确将被接收 */
#define  RB_ETH_ERXFCON_MPEN    0x08                  /* RW 0=不启用该过滤条件，1=当ANDOR=1，非魔法包将被过滤，当ANDOR=0，魔法包将被接收 */
#define  RB_ETH_ERXFCON_HTEN    0x04                  /* RW 0=不启用该过滤条件，1=当ANDOR=1，hash table不匹配将被过滤，当ANDOR=0，hash table匹配将被接收 */
#define  RB_ETH_ERXFCON_MCEN    0x02                  /* RW 0=不启用该过滤条件，1=当ANDOR=1，组播包不匹配将被过滤，当ANDOR=0，组播包匹配将被接收 */
#define  RB_ETH_ERXFCON_BCEN    0x01                  /* RW 0=不启用该过滤条件，1=当ANDOR=1，非广播包将被过滤，当ANDOR=0，广播包将被接收 */
#define R8_ETH_MACON1           (*((PUINT8V)(0x40009019))) /* Mac 层流控制寄存器 */
#define  RB_ETH_MACON1_FCEN     0x30                  /* RW 当FULDPX=0均无效，当FULDPX=1，11=发送0 timer暂停帧，然后停止发送，10=周期性发送暂停帧，01=发送一次暂停帧，然后停止发送，00=停止发送暂停帧 */
#define  RB_ETH_MACON1_TXPAUS   0x08                  /* RW 发送pause帧使能 */
#define  RB_ETH_MACON1_RXPAUS   0x04                  /* RW 接收pause帧使能 */
#define  RB_ETH_MACON1_PASSALL  0x02                  /* RW 1=没被过滤的控制帧将写入缓存，0=控制帧将被过滤 */
#define  RB_ETH_MACON1_MARXEN   0x01                  /* RW MAC层接收使能 */
#define R8_ETH_MACON2           (*((PUINT8V)(0x4000901A))) /* Mac 层封包控制寄存器 */
#define  RB_ETH_MACON2_PADCFG   0xE0                  /* RW 短包填充设置 */
#define  RB_ETH_MACON2_TXCRCEN  0x10                  /* RW 发送添加crc，PADCFG中如需要添加crc，该位置1 */
#define  RB_ETH_MACON2_PHDREN   0x08                  /* RW 特殊4字节不参与crc校验 */
#define  RB_ETH_MACON2_HFRMEN   0x04                  /* RW 允许接收巨型帧 */
#define  RB_ETH_MACON2_FULDPX   0x01                  /* RW 全双工 */
#define R8_ETH_MABBIPG          (*((PUINT8V)(0x4000901B))) /* 最小包间间隔寄存器 */
#define  RB_ETH_MABBIPG_MABBIPG 0x7F                  /* RW 最小包间间隔字节数 */

#define R32_ETH_TIM             (*((PUINT32V)(0x4000901C)))
#define R16_ETH_EPAUS           (*((PUINT16V)(0x4000901C))) /* RW 流控制暂停帧时间寄存器 */
#define R16_ETH_MAMXFL          (*((PUINT16V)(0x4000901E))) /* RW 最大接收包长度寄存器 */
#define R16_ETH_MIRD            (*((PUINT16V)(0x40009020))) /* RW MII 读数据寄存器 */

#define R32_ETH_MIWR            (*((PUINT32V)(0x40009024)))
#define R8_ETH_MIREGADR         (*((PUINT8V)(0x40009024))) /* MII 地址寄存器 */
#define  RB_ETH_MIREGADR_MASK   0x1F                  /* RW PHY 寄存器地址掩码 */
#define R8_ETH_MISTAT           (*((PUINT8V)(0x40009025))) /* MII 状态寄存器 */
//#define  RB_ETH_MIREGADR_MIIWR  0x20                  /* WO MII 写命令 */
#define R16_ETH_MIWR            (*((PUINT16V)(0x40009026))) /* WO MII 写数据寄存器 */
#define R32_ETH_MAADRL          (*((PUINT32V)(0x40009028))) /* RW MAC 1-4 */
#define R16_ETH_MAADRH          (*((PUINT16V)(0x4000902C))) /* RW MAC 5-6 */

#ifdef __cplusplus
}
#endif

#endif  // __CH579ETHSFR_H__


#ifndef __CH579USBSFR_H__
#define __CH579USBSFR_H__

#ifdef __cplusplus
extern "C" {
#endif

/******************************************************************************/
/*                         Peripheral memory map                              */
/******************************************************************************/
/* usb addresses
//      USB:     +8000H - 83FFH                                                    */
#define USB_BASE_ADDR        (0x40008000)

/*       USB  */
#define R32_USB_CONTROL      (*((PUINT32V)(0x40008000))) // USB control & interrupt enable & device address
#define R8_USB_CTRL          (*((PUINT8V)(0x40008000))) // USB base control
#define  RB_UC_HOST_MODE     0x80      // enable USB host mode: 0=device mode, 1=host mode
#define  RB_UC_LOW_SPEED     0x40      // enable USB low speed: 0=12Mbps, 1=1.5Mbps
#define  RB_UC_DEV_PU_EN     0x20      // USB device enable and internal pullup resistance enable
#define  RB_UC_SYS_CTRL1     0x20      // USB system control high bit
#define  RB_UC_SYS_CTRL0     0x10      // USB system control low bit
#define  MASK_UC_SYS_CTRL    0x30      // bit mask of USB system control
// bUC_HOST_MODE & bUC_SYS_CTRL1 & bUC_SYS_CTRL0: USB system control
//   0 00: disable USB device and disable internal pullup resistance
//   0 01: enable USB device and disable internal pullup resistance, need external pullup resistance
//   0 1x: enable USB device and enable internal pullup resistance
//   1 00: enable USB host and normal status
//   1 01: enable USB host and force UDP/UDM output SE0 state
//   1 10: enable USB host and force UDP/UDM output J state
//   1 11: enable USB host and force UDP/UDM output resume or K state
#define  RB_UC_INT_BUSY      0x08      // enable automatic responding busy for device mode or automatic pause for host mode during interrupt flag UIF_TRANSFER valid
#define  RB_UC_RESET_SIE     0x04      // force reset USB SIE, need software clear
#define  RB_UC_CLR_ALL       0x02      // force clear FIFO and count of USB
#define  RB_UC_DMA_EN        0x01      // DMA enable and DMA interrupt enable for USB

#define R8_UDEV_CTRL         (*((PUINT8V)(0x40008001))) // USB device physical prot control
#define  RB_UD_PD_DIS        0x80      // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
#define  RB_UD_DP_PIN        0x20      // ReadOnly: indicate current UDP pin level
#define  RB_UD_DM_PIN        0x10      // ReadOnly: indicate current UDM pin level
#define  RB_UD_LOW_SPEED     0x04      // enable USB physical port low speed: 0=full speed, 1=low speed
#define  RB_UD_GP_BIT        0x02      // general purpose bit
#define  RB_UD_PORT_EN       0x01      // enable USB physical port I/O: 0=disable, 1=enable

#define R8_UHOST_CTRL        R8_UDEV_CTRL // USB host physical prot control
#define  RB_UH_PD_DIS        0x80      // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
#define  RB_UH_DP_PIN        0x20      // ReadOnly: indicate current UDP pin level
#define  RB_UH_DM_PIN        0x10      // ReadOnly: indicate current UDM pin level
#define  RB_UH_LOW_SPEED     0x04      // enable USB port low speed: 0=full speed, 1=low speed
#define  RB_UH_BUS_RESET     0x02      // control USB bus reset: 0=normal, 1=force bus reset
#define  RB_UH_PORT_EN       0x01      // enable USB port: 0=disable, 1=enable port, automatic disabled if USB device detached

#define R8_USB_INT_EN        (*((PUINT8V)(0x40008002))) // USB interrupt enable
#define  RB_UIE_DEV_SOF      0x80      // enable interrupt for SOF received for USB device mode
#define  RB_UIE_DEV_NAK      0x40      // enable interrupt for NAK responded for USB device mode
#define  RB_UIE_FIFO_OV      0x10      // enable interrupt for FIFO overflow
#define  RB_UIE_HST_SOF      0x08      // enable interrupt for host SOF timer action for USB host mode
#define  RB_UIE_SUSPEND      0x04      // enable interrupt for USB suspend or resume event
#define  RB_UIE_TRANSFER     0x02      // enable interrupt for USB transfer completion
#define  RB_UIE_DETECT       0x01      // enable interrupt for USB device detected event for USB host mode
#define  RB_UIE_BUS_RST      0x01      // enable interrupt for USB bus reset event for USB device mode

#define R8_USB_DEV_AD        (*((PUINT8V)(0x40008003))) // USB device address
#define  RB_UDA_GP_BIT       0x80      // general purpose bit
#define  MASK_USB_ADDR       0x7F      // bit mask for USB device address

#define R32_USB_STATUS       (*((PUINT32V)(0x40008004))) // USB miscellaneous status & interrupt flag & interrupt status
#define R8_USB_MIS_ST        (*((PUINT8V)(0x40008005))) // USB miscellaneous status
#define  RB_UMS_SOF_PRES     0x80      // RO, indicate host SOF timer presage status
#define  RB_UMS_SOF_ACT      0x40      // RO, indicate host SOF timer action status for USB host
#define  RB_UMS_SIE_FREE     0x20      // RO, indicate USB SIE free status
#define  RB_UMS_R_FIFO_RDY   0x10      // RO, indicate USB receiving FIFO ready status (not empty)
#define  RB_UMS_BUS_RESET    0x08      // RO, indicate USB bus reset status
#define  RB_UMS_SUSPEND      0x04      // RO, indicate USB suspend status
#define  RB_UMS_DM_LEVEL     0x02      // RO, indicate UDM level saved at device attached to USB host
#define  RB_UMS_DEV_ATTACH   0x01      // RO, indicate device attached status on USB host

#define R8_USB_INT_FG        (*((PUINT8V)(0x40008006))) // USB interrupt flag
#define  RB_U_IS_NAK         0x80      // RO, indicate current USB transfer is NAK received
#define  RB_U_TOG_OK         0x40      // RO, indicate current USB transfer toggle is OK
#define  RB_U_SIE_FREE       0x20      // RO, indicate USB SIE free status
#define  RB_UIF_FIFO_OV      0x10      // FIFO overflow interrupt flag for USB, direct bit address clear or write 1 to clear
#define  RB_UIF_HST_SOF      0x08      // host SOF timer interrupt flag for USB host, direct bit address clear or write 1 to clear
#define  RB_UIF_SUSPEND      0x04      // USB suspend or resume event interrupt flag, direct bit address clear or write 1 to clear
#define  RB_UIF_TRANSFER     0x02      // USB transfer completion interrupt flag, direct bit address clear or write 1 to clear
#define  RB_UIF_DETECT       0x01      // device detected event interrupt flag for USB host mode, direct bit address clear or write 1 to clear
#define  RB_UIF_BUS_RST      0x01      // bus reset event interrupt flag for USB device mode, direct bit address clear or write 1 to clear

#define R8_USB_INT_ST        (*((PUINT8V)(0x40008007))) // USB interrupt status
#define  RB_UIS_IS_NAK       0x80      // RO, indicate current USB transfer is NAK received for USB device mode
#define  RB_UIS_TOG_OK       0x40      // RO, indicate current USB transfer toggle is OK
#define  RB_UIS_TOKEN1       0x20      // RO, current token PID code bit 1 received for USB device mode
#define  RB_UIS_TOKEN0       0x10      // RO, current token PID code bit 0 received for USB device mode
#define  MASK_UIS_TOKEN      0x30      // RO, bit mask of current token PID code received for USB device mode
#define  UIS_TOKEN_OUT       0x00
#define  UIS_TOKEN_SOF       0x10
#define  UIS_TOKEN_IN        0x20
#define  UIS_TOKEN_SETUP     0x30
// bUIS_TOKEN1 & bUIS_TOKEN0: current token PID code received for USB device mode
//   00: OUT token PID received
//   01: SOF token PID received
//   10: IN token PID received
//   11: SETUP token PID received
#define  MASK_UIS_ENDP       0x0F      // RO, bit mask of current transfer endpoint number for USB device mode
#define  MASK_UIS_H_RES      0x0F      // RO, bit mask of current transfer handshake response for USB host mode: 0000=no response, time out from device, others=handshake response PID received

#define R8_USB_RX_LEN        (*((PUINT8V)(0x40008008))) // USB receiving length
#define R32_USB_BUF_MODE     (*((PUINT32V)(0x4000800c))) // USB endpoint buffer mode
#define R8_UEP4_1_MOD        (*((PUINT8V)(0x4000800c))) // endpoint 4/1 mode
#define  RB_UEP1_RX_EN       0x80      // enable USB endpoint 1 receiving (OUT)
#define  RB_UEP1_TX_EN       0x40      // enable USB endpoint 1 transmittal (IN)
#define  RB_UEP1_BUF_MOD     0x10      // buffer mode of USB endpoint 1
// bUEPn_RX_EN & bUEPn_TX_EN & bUEPn_BUF_MOD: USB endpoint 1/2/3 buffer mode, buffer start address is UEPn_DMA
//   0 0 x:  disable endpoint and disable buffer
//   1 0 0:  64 bytes buffer for receiving (OUT endpoint)
//   1 0 1:  dual 64 bytes buffer by toggle bit bUEP_R_TOG selection for receiving (OUT endpoint), total=128bytes
//   0 1 0:  64 bytes buffer for transmittal (IN endpoint)
//   0 1 1:  dual 64 bytes buffer by toggle bit bUEP_T_TOG selection for transmittal (IN endpoint), total=128bytes
//   1 1 0:  64 bytes buffer for receiving (OUT endpoint) + 64 bytes buffer for transmittal (IN endpoint), total=128bytes
//   1 1 1:  dual 64 bytes buffer by bUEP_R_TOG selection for receiving (OUT endpoint) + dual 64 bytes buffer by bUEP_T_TOG selection for transmittal (IN endpoint), total=256bytes
#define  RB_UEP4_RX_EN       0x08      // enable USB endpoint 4 receiving (OUT)
#define  RB_UEP4_TX_EN       0x04      // enable USB endpoint 4 transmittal (IN)
// bUEP4_RX_EN & bUEP4_TX_EN: USB endpoint 4 buffer mode, buffer start address is UEP0_DMA
//   0 0:  single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint)
//   1 0:  single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint) + 64 bytes buffer for endpoint 4 receiving (OUT endpoint), total=128bytes
//   0 1:  single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint) + 64 bytes buffer for endpoint 4 transmittal (IN endpoint), total=128bytes
//   1 1:  single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint)
//           + 64 bytes buffer for endpoint 4 receiving (OUT endpoint) + 64 bytes buffer for endpoint 4 transmittal (IN endpoint), total=192bytes

#define R8_UEP2_3_MOD        (*((PUINT8V)(0x4000800d))) // endpoint 2/3 mode
#define  RB_UEP3_RX_EN       0x80      // enable USB endpoint 3 receiving (OUT)
#define  RB_UEP3_TX_EN       0x40      // enable USB endpoint 3 transmittal (IN)
#define  RB_UEP3_BUF_MOD     0x10      // buffer mode of USB endpoint 3
#define  RB_UEP2_RX_EN       0x08      // enable USB endpoint 2 receiving (OUT)
#define  RB_UEP2_TX_EN       0x04      // enable USB endpoint 2 transmittal (IN)
#define  RB_UEP2_BUF_MOD     0x01      // buffer mode of USB endpoint 2

#define R8_UH_EP_MOD         R8_UEP2_3_MOD //host endpoint mode
#define  RB_UH_EP_TX_EN      0x40      // enable USB host OUT endpoint transmittal
#define  RB_UH_EP_TBUF_MOD   0x10      // buffer mode of USB host OUT endpoint
// bUH_EP_TX_EN & bUH_EP_TBUF_MOD: USB host OUT endpoint buffer mode, buffer start address is UH_TX_DMA
//   0 x:  disable endpoint and disable buffer
//   1 0:  64 bytes buffer for transmittal (OUT endpoint)
//   1 1:  dual 64 bytes buffer by toggle bit bUH_T_TOG selection for transmittal (OUT endpoint), total=128bytes
#define  RB_UH_EP_RX_EN      0x08      // enable USB host IN endpoint receiving
#define  RB_UH_EP_RBUF_MOD   0x01      // buffer mode of USB host IN endpoint
// bUH_EP_RX_EN & bUH_EP_RBUF_MOD: USB host IN endpoint buffer mode, buffer start address is UH_RX_DMA
//   0 x:  disable endpoint and disable buffer
//   1 0:  64 bytes buffer for receiving (IN endpoint)
//   1 1:  dual 64 bytes buffer by toggle bit bUH_R_TOG selection for receiving (IN endpoint), total=128bytes

#define R16_UEP0_DMA         (*((PUINT16V)(0x40008010))) // endpoint 0 DMA buffer address
#define R16_UEP1_DMA         (*((PUINT16V)(0x40008014))) // endpoint 1 DMA buffer address
#define R16_UEP2_DMA         (*((PUINT16V)(0x40008018))) // endpoint 2 DMA buffer address
#define R16_UH_RX_DMA        R16_UEP2_DMA // host rx endpoint buffer high address
#define R16_UEP3_DMA         (*((PUINT16V)(0x4000801C))) // endpoint 3 DMA buffer address
#define R16_UH_TX_DMA        R16_UEP3_DMA // host tx endpoint buffer high address
#define R32_USB_EP0_CTRL     (*((PUINT32V)(0x40008020))) // endpoint 0 control & transmittal length
#define R8_UEP0_T_LEN        (*((PUINT8V)(0x40008020))) // endpoint 0 transmittal length
#define R8_UEP0_CTRL         (*((PUINT8V)(0x40008022))) // endpoint 0 control
#define R32_USB_EP1_CTRL     (*((PUINT32V)(0x40008024))) // endpoint 1 control & transmittal length
#define R8_UEP1_T_LEN        (*((PUINT8V)(0x40008024))) // endpoint 1 transmittal length
#define R8_UEP1_CTRL         (*((PUINT8V)(0x40008026))) // endpoint 1 control
#define  RB_UEP_R_TOG        0x80      // expected data toggle flag of USB endpoint X receiving (OUT): 0=DATA0, 1=DATA1
#define  RB_UEP_T_TOG        0x40      // prepared data toggle flag of USB endpoint X transmittal (IN): 0=DATA0, 1=DATA1
#define  RB_UEP_AUTO_TOG     0x10      // enable automatic toggle after successful transfer completion on endpoint 1/2/3: 0=manual toggle, 1=automatic toggle
#define  RB_UEP_R_RES1       0x08      // handshake response type high bit for USB endpoint X receiving (OUT)
#define  RB_UEP_R_RES0       0x04      // handshake response type low bit for USB endpoint X receiving (OUT)
#define  MASK_UEP_R_RES      0x0C      // bit mask of handshake response type for USB endpoint X receiving (OUT)
#define  UEP_R_RES_ACK       0x00
#define  UEP_R_RES_TOUT      0x04
#define  UEP_R_RES_NAK       0x08
#define  UEP_R_RES_STALL     0x0C
// RB_UEP_R_RES1 & RB_UEP_R_RES0: handshake response type for USB endpoint X receiving (OUT)
//   00: ACK (ready)
//   01: no response, time out to host, for non-zero endpoint isochronous transactions
//   10: NAK (busy)
//   11: STALL (error)
#define  RB_UEP_T_RES1       0x02      // handshake response type high bit for USB endpoint X transmittal (IN)
#define  RB_UEP_T_RES0       0x01      // handshake response type low bit for USB endpoint X transmittal (IN)
#define  MASK_UEP_T_RES      0x03      // bit mask of handshake response type for USB endpoint X transmittal (IN)
#define  UEP_T_RES_ACK       0x00
#define  UEP_T_RES_TOUT      0x01
#define  UEP_T_RES_NAK       0x02
#define  UEP_T_RES_STALL     0x03
// bUEP_T_RES1 & bUEP_T_RES0: handshake response type for USB endpoint X transmittal (IN)
//   00: DATA0 or DATA1 then expecting ACK (ready)
//   01: DATA0 or DATA1 then expecting no response, time out from host, for non-zero endpoint isochronous transactions
//   10: NAK (busy)
//   11: STALL (error)

#define R8_UH_SETUP          R8_UEP1_CTRL // host aux setup
#define  RB_UH_PRE_PID_EN    0x80      // USB host PRE PID enable for low speed device via hub
#define  RB_UH_SOF_EN        0x40      // USB host automatic SOF enable

#define R32_USB_EP2_CTRL     (*((PUINT32V)(0x40008028))) // endpoint 2 control & transmittal length
#define R8_UEP2_T_LEN        (*((PUINT8V)(0x40008028))) // endpoint 2 transmittal length
#define R8_UEP2_CTRL         (*((PUINT8V)(0x4000802a))) // endpoint 2 control

#define R8_UH_EP_PID         R8_UEP2_T_LEN // host endpoint and PID
#define  MASK_UH_TOKEN       0xF0      // bit mask of token PID for USB host transfer
#define  MASK_UH_ENDP        0x0F      // bit mask of endpoint number for USB host transfer

#define R8_UH_RX_CTRL        R8_UEP2_CTRL // host receiver endpoint control
#define  RB_UH_R_TOG         0x80      // expected data toggle flag of host receiving (IN): 0=DATA0, 1=DATA1
#define  RB_UH_R_AUTO_TOG    0x10      // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
#define  RB_UH_R_RES         0x04      // prepared handshake response type for host receiving (IN): 0=ACK (ready), 1=no response, time out to device, for isochronous transactions

#define R32_USB_EP3_CTRL     (*((PUINT32V)(0x4000802c))) // endpoint 3 control & transmittal length
#define R8_UEP3_T_LEN        (*((PUINT8V)(0x4000802c))) // endpoint 3 transmittal length
#define R8_UEP3_CTRL         (*((PUINT8V)(0x4000802e))) // endpoint 3 control
#define R8_UH_TX_LEN         R8_UEP3_T_LEN // host transmittal endpoint transmittal length

#define R8_UH_TX_CTRL        R8_UEP3_CTRL // host transmittal endpoint control
#define  RB_UH_T_TOG         0x40      // prepared data toggle flag of host transmittal (SETUP/OUT): 0=DATA0, 1=DATA1
#define  RB_UH_T_AUTO_TOG    0x10      // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
#define  RB_UH_T_RES         0x01      // expected handshake response type for host transmittal (SETUP/OUT): 0=ACK (ready), 1=no response, time out from device, for isochronous transactions

#define R32_USB_EP4_CTRL     (*((PUINT32V)(0x40008030))) // endpoint 4 control & transmittal length
#define R8_UEP4_T_LEN        (*((PUINT8V)(0x40008030))) // endpoint 4 transmittal length
#define R8_UEP4_CTRL         (*((PUINT8V)(0x40008032))) // endpoint 4 control

#define R8_USB_TYPE_C_CTRL   (*((PUINT8V)(0x40008038))) // USB type-C control
#define  RB_UTCC_GP_BIT      0x80      // USB general purpose bit
#define  RB_UCC2_PD_EN       0x40      // USB CC2 5.1K pulldown resistance: 0=disable, 1=enable pulldown
#define  RB_UCC2_PU1_EN      0x20      // USB CC2 pullup resistance control high bit
#define  RB_UCC2_PU0_EN      0x10      // USB CC2 pullup resistance control low bit
#define  RB_VBUS_PD_EN       0x08      // USB VBUS 10K pulldown resistance: 0=disable, 1=enable pullup
#define  RB_UCC1_PD_EN       0x04      // USB CC1 5.1K pulldown resistance: 0=disable, 1=enable pulldown
#define  RB_UCC1_PU1_EN      0x02      // USB CC1 pullup resistance control high bit
#define  RB_UCC1_PU0_EN      0x01      // USB CC1 pullup resistance control low bit
// RB_UCC?_PU1_EN & RB_UCC?_PU0_EN: USB CC pullup resistance selection
//   00: disable pullup resistance
//   01: enable 36K pullup resistance for default USB power
//   10: enable 12K pullup resistance for 1.5A USB power
//   11: enable 4.7K pullup resistance for 3A USB power


#ifdef __cplusplus
}
#endif

#endif //__CH579USBSFR_H__


#ifndef __USB_TYPE__
#define __USB_TYPE__

#ifdef __cplusplus
extern "C" {
#endif

/*----- USB constant and structure define --------------------------------*/

/* USB PID */
#ifndef USB_PID_SETUP
#define USB_PID_NULL            0x00    /* reserved PID */
#define USB_PID_SOF             0x05
#define USB_PID_SETUP           0x0D
#define USB_PID_IN              0x09
#define USB_PID_OUT             0x01
#define USB_PID_ACK             0x02
#define USB_PID_NAK                         0x0A
#define USB_PID_STALL           0x0E
#define USB_PID_DATA0           0x03
#define USB_PID_DATA1           0x0B
#define USB_PID_PRE             0x0C
#endif

/* USB standard device request code */
#ifndef USB_GET_DESCRIPTOR
#define USB_GET_STATUS          0x00
#define USB_CLEAR_FEATURE       0x01
#define USB_SET_FEATURE         0x03
#define USB_SET_ADDRESS         0x05
#define USB_GET_DESCRIPTOR      0x06
#define USB_SET_DESCRIPTOR      0x07
#define USB_GET_CONFIGURATION   0x08
#define USB_SET_CONFIGURATION   0x09
#define USB_GET_INTERFACE       0x0A
#define USB_SET_INTERFACE       0x0B
#define USB_SYNCH_FRAME         0x0C
#endif

/* USB hub class request code */
#ifndef HUB_GET_DESCRIPTOR
#define HUB_GET_STATUS          0x00
#define HUB_CLEAR_FEATURE       0x01
#define HUB_GET_STATE           0x02
#define HUB_SET_FEATURE         0x03
#define HUB_GET_DESCRIPTOR      0x06
#define HUB_SET_DESCRIPTOR      0x07
#endif

/* USB HID class request code */
#ifndef HID_GET_REPORT
#define HID_GET_REPORT          0x01
#define HID_GET_IDLE            0x02
#define HID_GET_PROTOCOL        0x03
#define HID_SET_REPORT          0x09
#define HID_SET_IDLE            0x0A
#define HID_SET_PROTOCOL        0x0B
#endif

/* Bit define for USB request type */
#ifndef USB_REQ_TYP_MASK
#define USB_REQ_TYP_IN          0x80            /* control IN, device to host */
#define USB_REQ_TYP_OUT         0x00            /* control OUT, host to device */
#define USB_REQ_TYP_READ        0x80            /* control read, device to host */
#define USB_REQ_TYP_WRITE       0x00            /* control write, host to device */
#define USB_REQ_TYP_MASK        0x60            /* bit mask of request type */
#define USB_REQ_TYP_STANDARD    0x00
#define USB_REQ_TYP_CLASS       0x20
#define USB_REQ_TYP_VENDOR      0x40
#define USB_REQ_TYP_RESERVED    0x60
#define USB_REQ_RECIP_MASK      0x1F            /* bit mask of request recipient */
#define USB_REQ_RECIP_DEVICE    0x00
#define USB_REQ_RECIP_INTERF    0x01
#define USB_REQ_RECIP_ENDP      0x02
#define USB_REQ_RECIP_OTHER     0x03
#endif

/* USB request type for hub class request */
#ifndef HUB_GET_HUB_DESCRIPTOR
#define HUB_CLEAR_HUB_FEATURE   0x20
#define HUB_CLEAR_PORT_FEATURE  0x23
#define HUB_GET_BUS_STATE       0xA3
#define HUB_GET_HUB_DESCRIPTOR  0xA0
#define HUB_GET_HUB_STATUS      0xA0
#define HUB_GET_PORT_STATUS     0xA3
#define HUB_SET_HUB_DESCRIPTOR  0x20
#define HUB_SET_HUB_FEATURE     0x20
#define HUB_SET_PORT_FEATURE    0x23
#endif

/* Hub class feature selectors */
#ifndef HUB_PORT_RESET
#define HUB_C_HUB_LOCAL_POWER   0
#define HUB_C_HUB_OVER_CURRENT  1
#define HUB_PORT_CONNECTION     0
#define HUB_PORT_ENABLE         1
#define HUB_PORT_SUSPEND        2
#define HUB_PORT_OVER_CURRENT   3
#define HUB_PORT_RESET          4
#define HUB_PORT_POWER          8
#define HUB_PORT_LOW_SPEED      9
#define HUB_C_PORT_CONNECTION   16
#define HUB_C_PORT_ENABLE       17
#define HUB_C_PORT_SUSPEND      18
#define HUB_C_PORT_OVER_CURRENT 19
#define HUB_C_PORT_RESET        20
#endif

/* USB descriptor type */
#ifndef USB_DESCR_TYP_DEVICE
#define USB_DESCR_TYP_DEVICE    0x01
#define USB_DESCR_TYP_CONFIG    0x02
#define USB_DESCR_TYP_STRING    0x03
#define USB_DESCR_TYP_INTERF    0x04
#define USB_DESCR_TYP_ENDP      0x05
#define USB_DESCR_TYP_QUALIF    0x06
#define USB_DESCR_TYP_SPEED     0x07
#define USB_DESCR_TYP_OTG       0x09
#define USB_DESCR_TYP_HID       0x21
#define USB_DESCR_TYP_REPORT    0x22
#define USB_DESCR_TYP_PHYSIC    0x23
#define USB_DESCR_TYP_CS_INTF   0x24
#define USB_DESCR_TYP_CS_ENDP   0x25
#define USB_DESCR_TYP_HUB       0x29
#endif

/* USB device class */
#ifndef USB_DEV_CLASS_HUB
#define USB_DEV_CLASS_RESERVED  0x00
#define USB_DEV_CLASS_AUDIO     0x01
#define USB_DEV_CLASS_COMMUNIC  0x02
#define USB_DEV_CLASS_HID       0x03
#define USB_DEV_CLASS_MONITOR   0x04
#define USB_DEV_CLASS_PHYSIC_IF 0x05
#define USB_DEV_CLASS_POWER     0x06
#define USB_DEV_CLASS_PRINTER   0x07
#define USB_DEV_CLASS_STORAGE   0x08
#define USB_DEV_CLASS_HUB       0x09
#define USB_DEV_CLASS_VEN_SPEC  0xFF
#endif

/* USB endpoint type and attributes */
#ifndef USB_ENDP_TYPE_MASK
#define USB_ENDP_DIR_MASK       0x80
#define USB_ENDP_ADDR_MASK      0x0F
#define USB_ENDP_TYPE_MASK      0x03
#define USB_ENDP_TYPE_CTRL      0x00
#define USB_ENDP_TYPE_ISOCH     0x01
#define USB_ENDP_TYPE_BULK      0x02
#define USB_ENDP_TYPE_INTER     0x03
#endif

#ifndef USB_DEVICE_ADDR
#define USB_DEVICE_ADDR         0x02    /* 默认的USB设备地址 */
#endif
#ifndef DEFAULT_ENDP0_SIZE
#define DEFAULT_ENDP0_SIZE      8       /* default maximum packet size for endpoint 0 */
#endif
#ifndef MAX_PACKET_SIZE
#define MAX_PACKET_SIZE         64      /* maximum packet size */
#endif
#ifndef USB_BO_CBW_SIZE
#define USB_BO_CBW_SIZE         0x1F    /* 命令块CBW的总长度 */
#define USB_BO_CSW_SIZE         0x0D    /* 命令状态块CSW的总长度 */
#endif
#ifndef USB_BO_CBW_SIG
#define USB_BO_CBW_SIG          0x43425355    /* 命令块CBW识别标志'USBC' */
#define USB_BO_CSW_SIG          0x53425355    /* 命令状态块CSW识别标志'USBS' */
#endif

//#define __PACKED
#ifndef __PACKED
#define __PACKED                __packed
#endif

__PACKED typedef struct _USB_SETUP_REQ {
    UINT8 bRequestType;
    UINT8 bRequest;
    UINT16 wValue;
    UINT16 wIndex;
    UINT16 wLength;
} USB_SETUP_REQ, *PUSB_SETUP_REQ;


__PACKED typedef struct _USB_DEVICE_DESCR {
    UINT8 bLength;
    UINT8 bDescriptorType;
    UINT16 bcdUSB;
    UINT8 bDeviceClass;
    UINT8 bDeviceSubClass;
    UINT8 bDeviceProtocol;
    UINT8 bMaxPacketSize0;
    UINT16 idVendor;
    UINT16 idProduct;
    UINT16 bcdDevice;
    UINT8 iManufacturer;
    UINT8 iProduct;
    UINT8 iSerialNumber;
    UINT8 bNumConfigurations;
} USB_DEV_DESCR, *PUSB_DEV_DESCR;


__PACKED typedef struct _USB_CONFIG_DESCR {
    UINT8 bLength;
    UINT8 bDescriptorType;
    UINT16 wTotalLength;
    UINT8 bNumInterfaces;
    UINT8 bConfigurationValue;
    UINT8 iConfiguration;
    UINT8 bmAttributes;
    UINT8 MaxPower;
} USB_CFG_DESCR, *PUSB_CFG_DESCR;


__PACKED typedef struct _USB_INTERF_DESCR {
    UINT8 bLength;
    UINT8 bDescriptorType;
    UINT8 bInterfaceNumber;
    UINT8 bAlternateSetting;
    UINT8 bNumEndpoints;
    UINT8 bInterfaceClass;
    UINT8 bInterfaceSubClass;
    UINT8 bInterfaceProtocol;
    UINT8 iInterface;
} USB_ITF_DESCR, *PUSB_ITF_DESCR;


__PACKED typedef struct _USB_ENDPOINT_DESCR {
    UINT8 bLength;
    UINT8 bDescriptorType;
    UINT8 bEndpointAddress;
    UINT8 bmAttributes;
    UINT16 wMaxPacketSize;
    UINT8 bInterval;
} USB_ENDP_DESCR, *PUSB_ENDP_DESCR;


__PACKED typedef struct _USB_CONFIG_DESCR_LONG {
    USB_CFG_DESCR   cfg_descr;
    USB_ITF_DESCR   itf_descr;
    USB_ENDP_DESCR  endp_descr[1];
} USB_CFG_DESCR_LONG, *PUSB_CFG_DESCR_LONG;

typedef USB_CFG_DESCR_LONG *PXUSB_CFG_DESCR_LONG;

__PACKED typedef struct _USB_HUB_DESCR {
    UINT8 bDescLength;
    UINT8 bDescriptorType;
    UINT8 bNbrPorts;
    UINT8 wHubCharacteristicsL;
    UINT8 wHubCharacteristicsH;
    UINT8 bPwrOn2PwrGood;
    UINT8 bHubContrCurrent;
    UINT8 DeviceRemovable;
    UINT8 PortPwrCtrlMask;
} USB_HUB_DESCR, *PUSB_HUB_DESCR;

typedef USB_HUB_DESCR  *PXUSB_HUB_DESCR;

__PACKED typedef struct _USB_HID_DESCR {
    UINT8 bLength;
    UINT8 bDescriptorType;
    UINT16 bcdHID;
    UINT8 bCountryCode;
    UINT8 bNumDescriptors;
    UINT8 bDescriptorTypeX;
    UINT8 wDescriptorLengthL;
    UINT8 wDescriptorLengthH;
} USB_HID_DESCR, *PUSB_HID_DESCR;

typedef USB_HID_DESCR *PXUSB_HID_DESCR;


__PACKED typedef struct _UDISK_BOC_CBW { /* command of BulkOnly USB-FlashDisk */
    UINT32 mCBW_Sig;
    UINT32 mCBW_Tag;
    UINT32 mCBW_DataLen;                /* uppest byte of data length, always is 0 */
    UINT8 mCBW_Flag;                    /* transfer direction and etc. */
    UINT8 mCBW_LUN;
    UINT8 mCBW_CB_Len;                  /* length of command block */
    UINT8 mCBW_CB_Buf[16];              /* command block buffer */
} UDISK_BOC_CBW, *PUDISK_BOC_CBW;

typedef UDISK_BOC_CBW  *PXUDISK_BOC_CBW;

__PACKED typedef struct _UDISK_BOC_CSW { /* status of BulkOnly USB-FlashDisk */
    UINT32 mCSW_Sig;
    UINT32 mCSW_Tag;
    UINT32 mCSW_Residue;                /* return: remainder bytes */  /* uppest byte of remainder length, always is 0 */
    UINT8 mCSW_Status;                  /* return: result status */
} UDISK_BOC_CSW, *PUDISK_BOC_CSW;

typedef UDISK_BOC_CSW  *PXUDISK_BOC_CSW;


#ifdef __cplusplus
}
#endif

#endif  // __USB_TYPE__