1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
|
/*
* File : board_uart.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2008 - 2016, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2015-11-19 Urey the first version
*/
#ifndef _BOARD_UART_H_
#define _BOARD_UART_H_
/* Uart Register */
#define UART_RDR(base) REG8((base) + 0x00) /* R 8b H'xx */
#define UART_TDR(base) REG8((base) + 0x00) /* W 8b H'xx */
#define UART_DLLR(base) REG8((base) + 0x00) /* RW 8b H'00 */
#define UART_DLHR(base) REG8((base) + 0x04) /* RW 8b H'00 */
#define UART_IER(base) REG8((base) + 0x04) /* RW 8b H'00 */
#define UART_ISR(base) REG8((base) + 0x08) /* R 8b H'01 */
#define UART_FCR(base) REG8((base) + 0x08) /* W 8b H'00 */
#define UART_LCR(base) REG8((base) + 0x0C) /* RW 8b H'00 */
#define UART_MCR(base) REG8((base) + 0x10) /* RW 8b H'00 */
#define UART_LSR(base) REG8((base) + 0x14) /* R 8b H'00 */
#define UART_MSR(base) REG8((base) + 0x18) /* R 8b H'00 */
#define UART_SPR(base) REG8((base) + 0x1C) /* RW 8b H'00 */
#define UART_MCR(base) REG8((base) + 0x10) /* RW 8b H'00 */
#define UART_SIRCR(base) REG8((base) + 0x20) /* RW 8b H'00 */
/*
* Define macros for UARTIER
* UART Interrupt Enable Register
*/
#define UARTIER_RIE (1 << 0) /* 0: receive fifo "full" interrupt disable */
#define UARTIER_TIE (1 << 1) /* 0: transmit fifo "empty" interrupt disable */
#define UARTIER_RLIE (1 << 2) /* 0: receive line status interrupt disable */
#define UARTIER_MIE (1 << 3) /* 0: modem status interrupt disable */
#define UARTIER_RTIE (1 << 4) /* 0: receive timeout interrupt disable */
/*
* Define macros for UARTISR
* UART Interrupt Status Register
*/
#define UARTISR_IP (1 << 0) /* 0: interrupt is pending 1: no interrupt */
#define UARTISR_IID (7 << 1) /* Source of Interrupt */
#define UARTISR_IID_MSI (0 << 1) /* Modem status interrupt */
#define UARTISR_IID_THRI (1 << 1) /* Transmitter holding register empty */
#define UARTISR_IID_RDI (2 << 1) /* Receiver data interrupt */
#define UARTISR_IID_RLSI (3 << 1) /* Receiver line status interrupt */
#define UARTISR_FFMS (3 << 6) /* FIFO mode select, set when UARTFCR.FE is set to 1 */
#define UARTISR_FFMS_NO_FIFO (0 << 6)
#define UARTISR_FFMS_FIFO_MODE (3 << 6)
/*
* Define macros for UARTFCR
* UART FIFO Control Register
*/
#define UARTFCR_FE (1 << 0) /* 0: non-FIFO mode 1: FIFO mode */
#define UARTFCR_RFLS (1 << 1) /* write 1 to flush receive FIFO */
#define UARTFCR_TFLS (1 << 2) /* write 1 to flush transmit FIFO */
#define UARTFCR_DMS (1 << 3) /* 0: disable DMA mode */
#define UARTFCR_UUE (1 << 4) /* 0: disable UART */
#define UARTFCR_RTRG (3 << 6) /* Receive FIFO Data Trigger */
#define UARTFCR_RTRG_1 (0 << 6)
#define UARTFCR_RTRG_4 (1 << 6)
#define UARTFCR_RTRG_8 (2 << 6)
#define UARTFCR_RTRG_15 (3 << 6)
/*
* Define macros for UARTLCR
* UART Line Control Register
*/
#define UARTLCR_WLEN (3 << 0) /* word length */
#define UARTLCR_WLEN_5 (0 << 0)
#define UARTLCR_WLEN_6 (1 << 0)
#define UARTLCR_WLEN_7 (2 << 0)
#define UARTLCR_WLEN_8 (3 << 0)
#define UARTLCR_STOP (1 << 2) /* 0: 1 stop bit when word length is 5,6,7,8
1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */
#define UARTLCR_PE (1 << 3) /* 0: parity disable */
#define UARTLCR_PROE (1 << 4) /* 0: even parity 1: odd parity */
#define UARTLCR_SPAR (1 << 5) /* 0: sticky parity disable */
#define UARTLCR_SBRK (1 << 6) /* write 0 normal, write 1 send break */
#define UARTLCR_DLAB (1 << 7) /* 0: access UARTRDR/TDR/IER 1: access UARTDLLR/DLHR */
/*
* Define macros for UARTLSR
* UART Line Status Register
*/
#define UARTLSR_DR (1 << 0) /* 0: receive FIFO is empty 1: receive data is ready */
#define UARTLSR_ORER (1 << 1) /* 0: no overrun error */
#define UARTLSR_PER (1 << 2) /* 0: no parity error */
#define UARTLSR_FER (1 << 3) /* 0; no framing error */
#define UARTLSR_BRK (1 << 4) /* 0: no break detected 1: receive a break signal */
#define UARTLSR_TDRQ (1 << 5) /* 1: transmit FIFO half "empty" */
#define UARTLSR_TEMT (1 << 6) /* 1: transmit FIFO and shift registers empty */
#define UARTLSR_RFER (1 << 7) /* 0: no receive error 1: receive error in FIFO mode */
/*
* Define macros for UARTMCR
* UART Modem Control Register
*/
#define UARTMCR_DTR (1 << 0) /* 0: DTR_ ouput high */
#define UARTMCR_RTS (1 << 1) /* 0: RTS_ output high */
#define UARTMCR_OUT1 (1 << 2) /* 0: UARTMSR.RI is set to 0 and RI_ input high */
#define UARTMCR_OUT2 (1 << 3) /* 0: UARTMSR.DCD is set to 0 and DCD_ input high */
#define UARTMCR_LOOP (1 << 4) /* 0: normal 1: loopback mode */
#define UARTMCR_MCE (1 << 7) /* 0: modem function is disable */
/*
* Define macros for UARTMSR
* UART Modem Status Register
*/
#define UARTMSR_DCTS (1 << 0) /* 0: no change on CTS_ pin since last read of UARTMSR */
#define UARTMSR_DDSR (1 << 1) /* 0: no change on DSR_ pin since last read of UARTMSR */
#define UARTMSR_DRI (1 << 2) /* 0: no change on RI_ pin since last read of UARTMSR */
#define UARTMSR_DDCD (1 << 3) /* 0: no change on DCD_ pin since last read of UARTMSR */
#define UARTMSR_CTS (1 << 4) /* 0: CTS_ pin is high */
#define UARTMSR_DSR (1 << 5) /* 0: DSR_ pin is high */
#define UARTMSR_RI (1 << 6) /* 0: RI_ pin is high */
#define UARTMSR_DCD (1 << 7) /* 0: DCD_ pin is high */
/*
* Define macros for SIRCR
* Slow IrDA Control Register
*/
#define SIRCR_TSIRE (1 << 0) /* 0: transmitter is in UART mode 1: IrDA mode */
#define SIRCR_RSIRE (1 << 1) /* 0: receiver is in UART mode 1: IrDA mode */
#define SIRCR_TPWS (1 << 2) /* 0: transmit 0 pulse width is 3/16 of bit length
1: 0 pulse width is 1.6us for 115.2Kbps */
#define SIRCR_TXPL (1 << 3) /* 0: encoder generates a positive pulse for 0 */
#define SIRCR_RXPL (1 << 4) /* 0: decoder interprets positive pulse as 0 */
void rt_hw_uart_init(void);
#endif /* _BOARD_UART_H_ */
|
