path: root/components/drivers/usb/cherryusb/port/nrf5x/usb_dc_nrf5x.c

#include <stddef.h>
#include <mdk/nrf52840_bitfields.h>
#include "nrf52840.h"
#include "usb_def.h"
#include "usb_dc.h"
#include "usbd_core.h"

#ifndef USBD_CONFIG_ISO_IN_ZLP
#define USBD_CONFIG_ISO_IN_ZLP 0
#endif

/*!< The default platform is NRF52840 */
#define NRF52_SERIES
/*!< Ep nums */
#define EP_NUMS 9
/*!< Ep mps */
#define EP_MPS 64
/*!< Nrf5x special */
#define EP_ISO_NUM 8

/*!< USBD peripheral address base */
#define NRF_USBD_BASE 0x40027000UL
/*!< Clock peripheral address base */
#define NRF_CLOCK_BASE 0x40000000UL

#define USBD_IRQn 39

#ifndef EP_ISO_MPS
#define EP_ISO_MPS 64
#endif

#define CHECK_ADD_IS_RAM(address) ((((uint32_t)address) & 0xE0000000u) == 0x20000000u) ? 1 : 0

/**
 * @brief   Endpoint information structure
 */
typedef struct _usbd_ep_info
{
  uint16_t mps;       /*!< Maximum packet length of endpoint */
  uint8_t eptype;     /*!< Endpoint Type */
  uint8_t ep_stalled; /* Endpoint stall flag */
  uint8_t ep_enable;  /* Endpoint enable */
  uint8_t *xfer_buf;
  uint32_t xfer_len;
  uint32_t actual_xfer_len;
  uint8_t ep_buffer[EP_MPS];
  /*!< Other endpoint parameters that may be used */
  volatile uint8_t is_using_dma;
  volatile uint8_t add_flag;
} usbd_ep_info;

/*!< nrf52840 usb */
struct _nrf52840_core_prvi
{
  uint8_t address;               /*!< address */
  usbd_ep_info ep_in[EP_NUMS];   /*!< ep in */
  usbd_ep_info ep_out[EP_NUMS];  /*!< ep out */
  struct usb_setup_packet setup; /*!< Setup package that may be used in interrupt processing (outside the protocol stack) */
  volatile uint8_t dma_running;
  int8_t in_count;
  volatile uint8_t iso_turn;
  volatile uint8_t iso_tx_is_ready;
  /**
   * For nrf5x, easydma will not move the setup packet into RAM.
   * We use a flag bit to judge whether the host sends setup,
   * and then notify usbd_ep_read to and from the register to read the setup package
   */
  volatile uint8_t is_setup_packet;
} usb_dc_cfg;

__WEAK void usb_dc_low_level_pre_init(void)
{
}

__WEAK void usb_dc_low_level_post_init(void)
{
}

__WEAK void usb_dc_low_level_deinit(void)
{
}


/**@brief Usbds the set remote wakeup.
 *
 * @param[in] busid do not used
 *
 * @retval
 */
int usbd_set_remote_wakeup (uint8_t busid)
{
    //TOGGLE_GPIOA9();
    //#TASK 1.唤醒使能+挂起标志+休眠标志
    // USB->CNTR |= (uint16_t)USB_CNTR_RESUME;
    return -1;
}

/**
 * @brief            Get setup package
 * @pre              None
 * @param[in]        setup Pointer to the address where the setup package is stored
 * @retval           None
 */
static inline void get_setup_packet(struct usb_setup_packet *setup)
{
  setup->bmRequestType = (uint8_t)(NRF_USBD->BMREQUESTTYPE);
  setup->bRequest = (uint8_t)(NRF_USBD->BREQUEST);
  setup->wIndex = (uint16_t)(NRF_USBD->WINDEXL | ((NRF_USBD->WINDEXH) << 8));
  setup->wLength = (uint16_t)(NRF_USBD->WLENGTHL | ((NRF_USBD->WLENGTHH) << 8));
  setup->wValue = (uint16_t)(NRF_USBD->WVALUEL | ((NRF_USBD->WVALUEH) << 8));
}

/**
 * @brief            Set tx easydma
 * @pre              None
 * @param[in]        ep      End point address
 * @param[in]        ptr     Data ram ptr
 * @param[in]        maxcnt  Max length
 * @retval           None
 */
static void nrf_usbd_ep_easydma_set_tx(uint8_t ep, uint32_t ptr, uint32_t maxcnt)
{
  uint8_t epid = USB_EP_GET_IDX(ep);
  if (epid == EP_ISO_NUM)
  {
    NRF_USBD->ISOIN.PTR = ptr;
    NRF_USBD->ISOIN.MAXCNT = maxcnt;
    return;
  }
  NRF_USBD->EPIN[epid].PTR = ptr;
  NRF_USBD->EPIN[epid].MAXCNT = maxcnt;
}

/**
 * @brief            Set rx easydma
 * @pre              None
 * @param[in]        ep      End point address
 * @param[in]        ptr     Data ram ptr
 * @param[in]        maxcnt  Max length
 * @retval           None
 */
static void nrf_usbd_ep_easydma_set_rx(uint8_t ep, uint32_t ptr, uint32_t maxcnt)
{
  uint8_t epid = USB_EP_GET_IDX(ep);
  if (epid == EP_ISO_NUM)
  {
    NRF_USBD->ISOOUT.PTR = ptr;
    NRF_USBD->ISOOUT.MAXCNT = maxcnt;
    return;
  }
  NRF_USBD->EPOUT[epid].PTR = ptr;
  NRF_USBD->EPOUT[epid].MAXCNT = maxcnt;
}

/**@brief Usbds the set address.
 *
 * @param[in] usbid   do not used
 * @param[in] address 8-bit valid address
 *
 * @retval >=0 success otherwise failureSet addressNone
 */
int usbd_set_address(uint8_t usbid, const uint8_t address)
{
  if (address == 0)
  {
    /*!< init 0 address */
  }
  else
  {
    /*!< For non-0 addresses, write the address to the register in the state phase of setting the address */
  }

  NRF_USBD->EVENTCAUSE |= NRF_USBD->EVENTCAUSE;
  NRF_USBD->EVENTS_USBEVENT = 0;

  NRF_USBD->INTENSET = USBD_INTEN_USBEVENT_Msk;
  /*!< nothing to do, handled by hardware; but don't STALL */
  usb_dc_cfg.address = address;
  return 0;
}

uint8_t usbd_get_port_speed(const uint8_t port)
{
    return USB_SPEED_FULL;
}

/**@brief Usbds the ep open.
 *
 * @param[in] busid  do not used
 * @param[in] ep_cfg Endpoint configuration structure pointer
 *
 * @retval >=0 success otherwise failureOpen endpointNone
 */
int usbd_ep_open(uint8_t busid, const struct usb_endpoint_descriptor *ep_cfg)
{
  /*!< ep id */
  uint8_t epid = USB_EP_GET_IDX(ep_cfg->bEndpointAddress);
  /*!< ep max packet length */
  uint16_t mps = ep_cfg->wMaxPacketSize;
  if (USB_EP_DIR_IS_IN(ep_cfg->bEndpointAddress))
  {
    /*!< In */
    usb_dc_cfg.ep_in[epid].mps = mps;
    usb_dc_cfg.ep_in[epid].eptype = ep_cfg->bmAttributes;
    usb_dc_cfg.ep_in[epid].ep_enable = true;
    /*!< Open ep */
    if (ep_cfg->bmAttributes != USB_ENDPOINT_TYPE_ISOCHRONOUS)
    {
      /*!< Enable endpoint interrupt */
      NRF_USBD->INTENSET = (1 << (USBD_INTEN_ENDEPIN0_Pos + epid));
      /*!< Enable the in endpoint host to respond when sending in token */
      NRF_USBD->EPINEN |= (1 << (epid));
      __ISB();
      __DSB();
    }
    else
    {
      NRF_USBD->EVENTS_ENDISOIN = 0;
      /*!< SPLIT ISO buffer when ISO OUT endpoint is already opened. */
      if (usb_dc_cfg.ep_out[EP_ISO_NUM].mps)
        NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN;

      /*!< Clear SOF event in case interrupt was not enabled yet. */
      if ((NRF_USBD->INTEN & USBD_INTEN_SOF_Msk) == 0)
        NRF_USBD->EVENTS_SOF = 0;

      /*!< Enable SOF and ISOIN interrupts, and ISOIN endpoint. */
      NRF_USBD->INTENSET = USBD_INTENSET_ENDISOIN_Msk | USBD_INTENSET_SOF_Msk;
      NRF_USBD->EPINEN |= USBD_EPINEN_ISOIN_Msk;
    }
  }
  else if (USB_EP_DIR_IS_OUT(ep_cfg->bEndpointAddress))
  {
    /*!< Out */
    usb_dc_cfg.ep_out[epid].mps = mps;
    usb_dc_cfg.ep_out[epid].eptype = ep_cfg->bmAttributes;
    usb_dc_cfg.ep_out[epid].ep_enable = true;
    /*!< Open ep */
    if (ep_cfg->bmAttributes != USB_ENDPOINT_TYPE_ISOCHRONOUS)
    {
      NRF_USBD->INTENSET = (1 << (USBD_INTEN_ENDEPOUT0_Pos + epid));
      NRF_USBD->EPOUTEN |= (1 << (epid));
      __ISB();
      __DSB();
      /*!< Write any value to SIZE register will allow nRF to ACK/accept data */
      NRF_USBD->SIZE.EPOUT[epid] = 0;
    }
    else
    {
      /*!< SPLIT ISO buffer when ISO IN endpoint is already opened. */
      if (usb_dc_cfg.ep_in[EP_ISO_NUM].mps)
        NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN;

      /*!< Clear old events */
      NRF_USBD->EVENTS_ENDISOOUT = 0;

      /*!< Clear SOF event in case interrupt was not enabled yet. */
      if ((NRF_USBD->INTEN & USBD_INTEN_SOF_Msk) == 0)
        NRF_USBD->EVENTS_SOF = 0;

      /*!< Enable SOF and ISOOUT interrupts, and ISOOUT endpoint. */
      NRF_USBD->INTENSET = USBD_INTENSET_ENDISOOUT_Msk | USBD_INTENSET_SOF_Msk;
      NRF_USBD->EPOUTEN |= USBD_EPOUTEN_ISOOUT_Msk;
    }
  }

  /*!< Clear stall and reset DataToggle */
  NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_UnStall << USBD_EPSTALL_STALL_Pos) | (ep_cfg->bEndpointAddress);
  NRF_USBD->DTOGGLE = (USBD_DTOGGLE_VALUE_Data0 << USBD_DTOGGLE_VALUE_Pos) | (ep_cfg->bEndpointAddress);

  __ISB();
  __DSB();

  return 0;
}

/**@brief Usbds the ep close.
 *
 * @param[in] busid do not used
 * @param[in] ep    ep ： Endpoint address
 *
 * @retval >=0 success otherwise failureClose endpointNone
 */
int usbd_ep_close(uint8_t busid, const uint8_t ep)
{
  /*!< ep id */
  uint8_t epid = USB_EP_GET_IDX(ep);
  if (epid != EP_ISO_NUM)
  {

    if (USB_EP_DIR_IS_OUT(ep))
    {
      usb_dc_cfg.ep_out[epid].ep_enable = false;
      NRF_USBD->INTENCLR = (1 << (USBD_INTEN_ENDEPOUT0_Pos + epid));
      NRF_USBD->EPOUTEN &= ~(1 << (epid));
    }
    else
    {
      usb_dc_cfg.ep_in[epid].ep_enable = false;
      NRF_USBD->INTENCLR = (1 << (USBD_INTEN_ENDEPIN0_Pos + epid));
      NRF_USBD->EPINEN &= ~(1 << (epid));
    }
  }
  else
  {
    /*!< ISO EP */
    if (USB_EP_DIR_IS_OUT(ep))
    {
      usb_dc_cfg.ep_out[epid].ep_enable = false;
      usb_dc_cfg.ep_out[EP_ISO_NUM].mps = 0;
      NRF_USBD->INTENCLR = USBD_INTENCLR_ENDISOOUT_Msk;
      NRF_USBD->EPOUTEN &= ~USBD_EPOUTEN_ISOOUT_Msk;
      NRF_USBD->EVENTS_ENDISOOUT = 0;
    }
    else
    {
      usb_dc_cfg.ep_in[epid].ep_enable = false;
      usb_dc_cfg.ep_in[EP_ISO_NUM].mps = 0;
      NRF_USBD->INTENCLR = USBD_INTENCLR_ENDISOIN_Msk;
      NRF_USBD->EPINEN &= ~USBD_EPINEN_ISOIN_Msk;
    }
    /*!< One of the ISO endpoints closed, no need to split buffers any more. */
    NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_OneDir;
    /*!< When both ISO endpoint are close there is no need for SOF any more. */
    if (usb_dc_cfg.ep_in[EP_ISO_NUM].mps + usb_dc_cfg.ep_out[EP_ISO_NUM].mps == 0)
    {
      NRF_USBD->INTENCLR = USBD_INTENCLR_SOF_Msk;
    }
  }
  __ISB();
  __DSB();

  return 0;
}

/**
 * @brief Setup in ep transfer setting and start transfer.
 *
 * This function is asynchronous.
 * This function is similar to uart with tx dma.
 *
 * This function is called to write data to the specified endpoint. The
 * supplied usbd_endpoint_callback function will be called when data is transmitted
 * out.
 *
 * @param[in]  busid     do not used
 * @param[in]  ep        Endpoint address corresponding to the one
 *                       listed in the device configuration table
 * @param[in]  data      Pointer to data to write
 * @param[in]  data_len  Length of the data requested to write. This may
 *                       be zero for a zero length status packet.
 * @return 0 on success, negative errno code on fail.
 */
int usbd_ep_start_write(uint8_t busid, const uint8_t ep, const uint8_t *data, uint32_t data_len)
{
  uint8_t ep_idx = USB_EP_GET_IDX(ep);

  if (!data && data_len)
  {
    return -1;
  }
  if (!usb_dc_cfg.ep_in[ep_idx].ep_enable)
  {
    return -2;
  }
  if ((uint32_t)data & 0x03)
  {
    return -3;
  }

  usb_dc_cfg.ep_in[ep_idx].xfer_buf = (uint8_t *)data;
  usb_dc_cfg.ep_in[ep_idx].xfer_len = data_len;
  usb_dc_cfg.ep_in[ep_idx].actual_xfer_len = 0;

  if (data_len == 0)
  {
    /*!< write 0 len data */
    nrf_usbd_ep_easydma_set_tx(ep_idx, (uint32_t)NULL, 0);
    NRF_USBD->TASKS_STARTEPIN[ep_idx] = 1;
  }
  else
  {
    /*!< Not zlp */
    data_len = MIN(data_len, usb_dc_cfg.ep_in[ep_idx].mps);
    if (!CHECK_ADD_IS_RAM(data))
    {
      /*!< Data is not in ram */
      /*!< Memcpy data to ram */
      memcpy(usb_dc_cfg.ep_in[ep_idx].ep_buffer, data, data_len);
      nrf_usbd_ep_easydma_set_tx(ep_idx, (uint32_t)usb_dc_cfg.ep_in[ep_idx].ep_buffer, data_len);
    }
    else
    {
      nrf_usbd_ep_easydma_set_tx(ep_idx, (uint32_t)data, data_len);
    }
    /**
     * Note that starting DMA transmission is to transmit data to USB peripherals,
     * and then wait for the host to get it
     */
    /*!< Start dma transfer */
    if (ep_idx != EP_ISO_NUM)
    {
      NRF_USBD->TASKS_STARTEPIN[ep_idx] = 1;
    }
    else
    {
      // NRF_USBD->TASKS_STARTISOIN = 1;
      usb_dc_cfg.iso_tx_is_ready = 1;
    }
  }
  return 0;
}

/**
 * @brief Setup out ep transfer setting and start transfer.
 *
 * This function is asynchronous.
 * This function is similar to uart with rx dma.
 *
 * This function is called to read data to the specified endpoint. The
 * supplied usbd_endpoint_callback function will be called when data is received
 * in.
 *
 * @param[in]  busid     do not used
 * @param[in]  ep        Endpoint address corresponding to the one
 *                       listed in the device configuration table
 * @param[in]  data      Pointer to data to read
 * @param[in]  data_len  Max length of the data requested to read.
 *
 * @return 0 on success, negative errno code on fail.
 */
int     usbd_ep_start_read(uint8_t busid, const uint8_t ep, uint8_t *data, uint32_t data_len)
{
  uint8_t ep_idx = USB_EP_GET_IDX(ep);

  if (!data && data_len)
  {
    return -1;
  }
  if (!usb_dc_cfg.ep_out[ep_idx].ep_enable)
  {
    return -2;
  }
  if ((uint32_t)data & 0x03)
  {
    return -3;
  }

  usb_dc_cfg.ep_out[ep_idx].xfer_buf = (uint8_t *)data;
  usb_dc_cfg.ep_out[ep_idx].xfer_len = data_len;
  usb_dc_cfg.ep_out[ep_idx].actual_xfer_len = 0;

  if (data_len == 0)
  {
    return 0;
  }
  else
  {
    data_len = MIN(data_len, usb_dc_cfg.ep_out[ep_idx].mps);
    if (!CHECK_ADD_IS_RAM(data))
    {
      /*!< Data address is not in ram */
      // TODO:
    }
    else
    {
      if (ep_idx == 0)
      {
        NRF_USBD->TASKS_EP0RCVOUT = 1;
      }
      nrf_usbd_ep_easydma_set_rx(ep_idx, (uint32_t)data, data_len);
    }
  }
  return 0;
}

/**
 * @brief            Endpoint setting pause
 * @pre              None
 * @param[in]        busid     do not used
 * @param[in]        ep ： Endpoint address
 * @retval           >=0 success otherwise failure
 */
int usbd_ep_set_stall(uint8_t busid, const uint8_t ep)
{
  /*!< ep id */
  uint8_t epid = USB_EP_GET_IDX(ep);
  if (epid == 0)
  {
    NRF_USBD->TASKS_EP0STALL = 1;
  }
  else if (epid != EP_ISO_NUM)
  {
    NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_Stall << USBD_EPSTALL_STALL_Pos) | (ep);
  }
  __ISB();
  __DSB();
  return 0;
}

/**
 * @brief            Endpoint clear pause
 * @pre              None
 * @param[in]        busid     do not used
 * @param[in]        ep ： Endpoint address
 * @retval           >=0 success otherwise failure
 */
int usbd_ep_clear_stall(uint8_t usbid, const uint8_t ep)
{
  /*!< ep id */
  uint8_t epid = USB_EP_GET_IDX(ep);

  if (epid != 0 && epid != EP_ISO_NUM)
  {
    /**
     * reset data toggle to DATA0
     * First write this register with VALUE=Nop to select the endpoint, then either read it to get the status from
     * VALUE, or write it again with VALUE=Data0 or Data1
     */
    NRF_USBD->DTOGGLE = ep;
    NRF_USBD->DTOGGLE = (USBD_DTOGGLE_VALUE_Data0 << USBD_DTOGGLE_VALUE_Pos) | ep;

    /*!< Clear stall */
    NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_UnStall << USBD_EPSTALL_STALL_Pos) | ep;

    /*!< Write any value to SIZE register will allow nRF to ACK/accept data */
    if (USB_EP_DIR_IS_OUT(ep))
      NRF_USBD->SIZE.EPOUT[epid] = 0;

    __ISB();
    __DSB();
  }

  return 0;
}

/**
 * @brief            Check endpoint status
 * @pre              None
 * @param[in]        busid     do not used
 * @param[in]        ep ： Endpoint address
 * @param[out]       stalled ： Outgoing endpoint status
 * @retval           >=0 success otherwise failure
 */
int usbd_ep_is_stalled(uint8_t busid, const uint8_t ep, uint8_t *stalled)
{
  return 0;
}

/**
 * @brief            USB initialization
 * @pre              None
 * @param[in]        busid     do not used
 * @retval           >=0 success otherwise failure
 */
int usb_dc_init(uint8_t busid)
{
  /*!< dc init */
  usb_dc_low_level_pre_init();

  memset(&usb_dc_cfg, 0, sizeof(usb_dc_cfg));
  /*!< Clear USB Event Interrupt */
  NRF_USBD->EVENTS_USBEVENT = 0;
  NRF_USBD->EVENTCAUSE |= NRF_USBD->EVENTCAUSE;

  /*!< Reset interrupt */
  NRF_USBD->INTENCLR = NRF_USBD->INTEN;
  NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk | USBD_INTEN_USBEVENT_Msk | USBD_INTEN_EPDATA_Msk |
                       USBD_INTEN_EP0SETUP_Msk | USBD_INTEN_EP0DATADONE_Msk | USBD_INTEN_ENDEPIN0_Msk | USBD_INTEN_ENDEPOUT0_Msk | USBD_INTEN_STARTED_Msk;

  usb_dc_low_level_post_init();
  return 0;
}

/**
 * @brief            USB deinit
 * @pre              None
 * @param[in]        busid     do not used
 * @retval           >=0 success otherwise failure
 */
int usb_dc_deinit(uint8_t busid)
{
  /*!< dc deinit */
  return 0;
}

/**
 * @brief            USB interrupt processing function
 * @pre              None
 * @param[in]        None
 * @retval           None
 */
void USBD_IRQHandler(uint8_t busid)
{
  uint32_t const inten = NRF_USBD->INTEN;
  uint32_t int_status = 0;
  volatile uint32_t usb_event = 0;
  volatile uint32_t *regevt = &NRF_USBD->EVENTS_USBRESET;

  /*!< Traverse USB events */
  for (uint8_t i = 0; i < USBD_INTEN_EPDATA_Pos + 1; i++)
  {
    if ((inten & (1 << i)) && regevt[i])
    {
      int_status |= (1 << (i));
      /*!< event clear */
      regevt[i] = 0;
      __ISB();
      __DSB();
    }
  }

  /*!< bit 24 */
  if (int_status & USBD_INTEN_EPDATA_Msk)
  {
    /*!< out ep */
    for (uint8_t ep_out_ct = 1; ep_out_ct <= 7; ep_out_ct++)
    {
      if ((NRF_USBD->EPDATASTATUS) & (1 << (16 + ep_out_ct)))
      {
        NRF_USBD->EPDATASTATUS |= (1 << (16 + ep_out_ct));
        /*!< The data arrives at the usb fifo, starts the dma transmission, and transfers it to the user ram  */
        NRF_USBD->TASKS_STARTEPOUT[ep_out_ct] = 1;
      }
    }
    /*!< in ep */
    for (uint8_t ep_in_ct = 1; ep_in_ct <= 7; ep_in_ct++)
    {
      if ((NRF_USBD->EPDATASTATUS) & (1 << (0 + ep_in_ct)))
      {
        /*!< in ep tranfer to host successfully */
        NRF_USBD->EPDATASTATUS |= (1 << (0 + ep_in_ct));
        if (usb_dc_cfg.ep_in[ep_in_ct].xfer_len > usb_dc_cfg.ep_in[ep_in_ct].mps)
        {
          /*!< Need start in again */
          usb_dc_cfg.ep_in[ep_in_ct].xfer_buf += usb_dc_cfg.ep_in[ep_in_ct].mps;
          usb_dc_cfg.ep_in[ep_in_ct].xfer_len -= usb_dc_cfg.ep_in[ep_in_ct].mps;
          usb_dc_cfg.ep_in[ep_in_ct].actual_xfer_len += usb_dc_cfg.ep_in[ep_in_ct].mps;
          if (usb_dc_cfg.ep_in[ep_in_ct].xfer_len > usb_dc_cfg.ep_in[ep_in_ct].mps)
          {
            nrf_usbd_ep_easydma_set_tx(ep_in_ct, (uint32_t)usb_dc_cfg.ep_in[ep_in_ct].xfer_buf, usb_dc_cfg.ep_in[ep_in_ct].mps);
          }
          else
          {
            nrf_usbd_ep_easydma_set_tx(ep_in_ct, (uint32_t)usb_dc_cfg.ep_in[ep_in_ct].xfer_buf, usb_dc_cfg.ep_in[ep_in_ct].xfer_len);
          }
          NRF_USBD->TASKS_STARTEPIN[ep_in_ct] = 1;
        }
        else
        {
          usb_dc_cfg.ep_in[ep_in_ct].actual_xfer_len += usb_dc_cfg.ep_in[ep_in_ct].xfer_len;
          usb_dc_cfg.ep_in[ep_in_ct].xfer_len = 0;
          usbd_event_ep_in_complete_handler(0, ep_in_ct | 0x80, usb_dc_cfg.ep_in[ep_in_ct].actual_xfer_len);
        }
      }
    }
  }

  /*!< bit 23 */
  if (int_status & USBD_INTEN_EP0SETUP_Msk)
  {
    /* Setup */
    /*!< Storing this setup package will help the following procedures */
    get_setup_packet(&(usb_dc_cfg.setup));
    /*!< Nrf52840 will set the address automatically by hardware,
         so the protocol stack of the address setting command sent by the host does not need to be processed */

    if (usb_dc_cfg.setup.wLength == 0)
    {
      NRF_USBD->TASKS_EP0STATUS = 1;
    }

    if (usb_dc_cfg.setup.bRequest != USB_REQUEST_SET_ADDRESS)
    {
      usbd_event_ep0_setup_complete_handler(0, (uint8_t *)&(usb_dc_cfg.setup));
    }
  }

  /*!< bit 22 */
  if (int_status & USBD_INTEN_USBEVENT_Msk)
  {
    usb_event = NRF_USBD->EVENTCAUSE;
    NRF_USBD->EVENTCAUSE = usb_event;
    if (usb_event & USBD_EVENTCAUSE_SUSPEND_Msk)
    {
      NRF_USBD->LOWPOWER = 1;
      /*!<  */
    }
    if (usb_event & USBD_EVENTCAUSE_RESUME_Msk)
    {
      /*!<  */
    }
    if (usb_event & USBD_EVENTCAUSE_USBWUALLOWED_Msk)
    {
      NRF_USBD->DPDMVALUE = USBD_DPDMVALUE_STATE_Resume;
      NRF_USBD->TASKS_DPDMDRIVE = 1;
      /**
       * There is no Resume interrupt for remote wakeup, enable SOF for to report bus ready state
       * Clear SOF event in case interrupt was not enabled yet.
       */
      if ((NRF_USBD->INTEN & USBD_INTEN_SOF_Msk) == 0)
        NRF_USBD->EVENTS_SOF = 0;
      NRF_USBD->INTENSET = USBD_INTENSET_SOF_Msk;
    }
  }

  /*!< bit 21 */
  if (int_status & USBD_INTEN_SOF_Msk)
  {
    bool iso_enabled = false;
    /*!< ISOOUT: Transfer data gathered in previous frame from buffer to RAM */
    if (NRF_USBD->EPOUTEN & USBD_EPOUTEN_ISOOUT_Msk)
    {
      iso_enabled = true;
      /*!< If ZERO bit is set, ignore ISOOUT length */
      if ((NRF_USBD->SIZE.ISOOUT) & USBD_SIZE_ISOOUT_ZERO_Msk)
      {
      }
      else
      {
        /*!< Trigger DMA move data from Endpoint -> SRAM */
        NRF_USBD->TASKS_STARTISOOUT = 1;
        /*!< EP_ISO_NUM out using dma */
        usb_dc_cfg.ep_out[EP_ISO_NUM].is_using_dma = 1;
      }
    }

    /*!< ISOIN: Notify client that data was transferred */
    if (NRF_USBD->EPINEN & USBD_EPINEN_ISOIN_Msk)
    {
      iso_enabled = true;
      if (usb_dc_cfg.iso_tx_is_ready == 1)
      {
        usb_dc_cfg.iso_tx_is_ready = 0;
        NRF_USBD->TASKS_STARTISOIN = 1;
      }
    }

    if (!iso_enabled)
    {
      /**
       * ISO endpoint is not used, SOF is only enabled one-time for remote wakeup
       * so we disable it now
       */
      NRF_USBD->INTENCLR = USBD_INTENSET_SOF_Msk;
    }
  }

  /*!< bit 20 */
  if (int_status & USBD_INTEN_ENDISOOUT_Msk)
  {
    if (usb_dc_cfg.ep_out[EP_ISO_NUM].is_using_dma == 1)
    {
      usb_dc_cfg.ep_out[EP_ISO_NUM].is_using_dma = 0;
      uint32_t read_count = NRF_USBD->SIZE.ISOOUT;
      usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_buf += read_count;
      usb_dc_cfg.ep_out[EP_ISO_NUM].actual_xfer_len += read_count;
      usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_len -= read_count;

      if ((read_count < usb_dc_cfg.ep_out[EP_ISO_NUM].mps) || (usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_len == 0))
      {
        usbd_event_ep_out_complete_handler(0, ((EP_ISO_NUM)&0x7f), usb_dc_cfg.ep_out[EP_ISO_NUM].actual_xfer_len);
      }
      else
      {
        if (usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_len > usb_dc_cfg.ep_out[EP_ISO_NUM].mps)
        {
          nrf_usbd_ep_easydma_set_rx(((EP_ISO_NUM)&0x7f), (uint32_t)usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_buf, usb_dc_cfg.ep_out[EP_ISO_NUM].mps);
        }
        else
        {
          nrf_usbd_ep_easydma_set_rx(((EP_ISO_NUM)&0x7f), (uint32_t)usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_buf, usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_len);
        }
      }
    }
  }

  /**
   * Traverse ordinary out endpoint events, starting from endpoint 1 to endpoint 7,
   * and end 0 for special processing
   */
  for (uint8_t offset = 0; offset < 7; offset++)
  {
    if (int_status & (USBD_INTEN_ENDEPOUT1_Msk << offset))
    {
      /*!< Out 'offset' transfer complete */
      uint32_t read_count = NRF_USBD->SIZE.EPOUT[offset + 1];
      usb_dc_cfg.ep_out[offset + 1].xfer_buf += read_count;
      usb_dc_cfg.ep_out[offset + 1].actual_xfer_len += read_count;
      usb_dc_cfg.ep_out[offset + 1].xfer_len -= read_count;

      if ((read_count < usb_dc_cfg.ep_out[offset + 1].mps) || (usb_dc_cfg.ep_out[offset + 1].xfer_len == 0))
      {
        usbd_event_ep_out_complete_handler(0, ((offset + 1) & 0x7f), usb_dc_cfg.ep_out[offset + 1].actual_xfer_len);
      }
      else
      {
        if (usb_dc_cfg.ep_out[offset + 1].xfer_len > usb_dc_cfg.ep_out[offset + 1].mps)
        {
          nrf_usbd_ep_easydma_set_rx(((offset + 1) & 0x7f), (uint32_t)usb_dc_cfg.ep_out[offset + 1].xfer_buf, usb_dc_cfg.ep_out[offset + 1].mps);
        }
        else
        {
          nrf_usbd_ep_easydma_set_rx(((offset + 1) & 0x7f), (uint32_t)usb_dc_cfg.ep_out[offset + 1].xfer_buf, usb_dc_cfg.ep_out[offset + 1].xfer_len);
        }
      }
    }
  }

  /*!< bit 12 */
  if (int_status & USBD_INTEN_ENDEPOUT0_Msk)
  {
    uint32_t read_count = NRF_USBD->SIZE.EPOUT[0];
    usb_dc_cfg.ep_out[0].actual_xfer_len += read_count;
    usb_dc_cfg.ep_out[0].xfer_len -= read_count;

    if (usb_dc_cfg.ep_out[0].xfer_len == 0)
    {
      /*!< Enable the state phase of endpoint 0 */
      NRF_USBD->TASKS_EP0STATUS = 1;
    }

    usbd_event_ep_out_complete_handler(0, 0x00, usb_dc_cfg.ep_out[0].actual_xfer_len);
  }

  /*!< bit 11 */
  if (int_status & USBD_INTEN_ENDISOIN_Msk)
  {
  }

  /*!< bit 10 */
  if (int_status & USBD_INTEN_EP0DATADONE_Msk)
  {
    switch (usb_dc_cfg.setup.bmRequestType >> USB_REQUEST_DIR_SHIFT)
    {
    case 1:
      /*!< IN */
      if (usb_dc_cfg.ep_in[0].xfer_len > usb_dc_cfg.ep_in[0].mps)
      {
        usb_dc_cfg.ep_in[0].xfer_len -= usb_dc_cfg.ep_in[0].mps;
        usb_dc_cfg.ep_in[0].actual_xfer_len += usb_dc_cfg.ep_in[0].mps;
        usbd_event_ep_in_complete_handler(0, 0 | 0x80, usb_dc_cfg.ep_in[0].actual_xfer_len);
      }
      else
      {
        usb_dc_cfg.ep_in[0].actual_xfer_len += usb_dc_cfg.ep_in[0].xfer_len;
        usb_dc_cfg.ep_in[0].xfer_len = 0;
        /*!< Enable the state phase of endpoint 0 */
        usbd_event_ep_in_complete_handler(0, 0 | 0x80, usb_dc_cfg.ep_in[0].actual_xfer_len);
        NRF_USBD->TASKS_EP0STATUS = 1;
      }
      break;
    case 0:
      if (usb_dc_cfg.setup.bRequest != USB_REQUEST_SET_ADDRESS)
      {
        /*!< The data arrives at the usb fifo, starts the dma transmission, and transfers it to the user ram  */
        NRF_USBD->TASKS_STARTEPOUT[0] = 1;
      }
      break;
    }
  }

  /**
   * Traversing ordinary in endpoint events, starting from endpoint 1 to endpoint 7,
   * endpoint 0 special processing
   */
  for (uint8_t offset = 0; offset < 7; offset++)
  {
    if (int_status & (USBD_INTEN_ENDEPIN1_Msk << offset))
    {
      /*!< DMA move data completed */
    }
  }

  /*!< bit 1 */
  if (int_status & USBD_INTEN_STARTED_Msk)
  {
    /*!< Easy dma start transfer data */
  }

  /*!< bit 2 */
  if (int_status & USBD_INTEN_ENDEPIN0_Msk)
  {
    /*!< EP0 IN DMA move data completed */
  }

  /*!< bit 0 */
  if (int_status & USBD_INTEN_USBRESET_Msk)
  {
    NRF_USBD->EPOUTEN = 1UL;
    NRF_USBD->EPINEN = 1UL;

    for (int i = 0; i < 8; i++)
    {
      NRF_USBD->TASKS_STARTEPIN[i] = 0;
      NRF_USBD->TASKS_STARTEPOUT[i] = 0;
    }

    NRF_USBD->TASKS_STARTISOIN = 0;
    NRF_USBD->TASKS_STARTISOOUT = 0;

    /*!< Clear USB Event Interrupt */
    NRF_USBD->EVENTS_USBEVENT = 0;
    NRF_USBD->EVENTCAUSE |= NRF_USBD->EVENTCAUSE;

    /*!< Reset interrupt */
    NRF_USBD->INTENCLR = NRF_USBD->INTEN;
    NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk | USBD_INTEN_USBEVENT_Msk | USBD_INTEN_EPDATA_Msk |
                         USBD_INTEN_EP0SETUP_Msk | USBD_INTEN_EP0DATADONE_Msk | USBD_INTEN_ENDEPIN0_Msk | USBD_INTEN_ENDEPOUT0_Msk | USBD_INTEN_STARTED_Msk;

    usbd_event_reset_handler(0);
  }
}

/**
 * Errata: USB cannot be enabled.
 */
static bool chyu_nrf52_errata_187(void)
{
#ifndef NRF52_SERIES
  return false;
#else
#if defined(NRF52820_XXAA) || defined(DEVELOP_IN_NRF52820) || defined(NRF52833_XXAA) || defined(DEVELOP_IN_NRF52833) || defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
  uint32_t var1 = *(uint32_t *)0x10000130ul;
  uint32_t var2 = *(uint32_t *)0x10000134ul;
#endif
#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
  if (var1 == 0x08)
  {
    switch (var2)
    {
    case 0x00ul:
      return false;
    case 0x01ul:
      return true;
    case 0x02ul:
      return true;
    case 0x03ul:
      return true;
    default:
      return true;
    }
  }
#endif
#if defined(NRF52833_XXAA) || defined(DEVELOP_IN_NRF52833)
  if (var1 == 0x0D)
  {
    switch (var2)
    {
    case 0x00ul:
      return true;
    case 0x01ul:
      return true;
    default:
      return true;
    }
  }
#endif
#if defined(NRF52820_XXAA) || defined(DEVELOP_IN_NRF52820)
  if (var1 == 0x10)
  {
    switch (var2)
    {
    case 0x00ul:
      return true;
    case 0x01ul:
      return true;
    case 0x02ul:
      return true;
    default:
      return true;
    }
  }
#endif
  return false;
#endif
}

/**
 * Errata: USBD might not reach its active state.
 */
static bool chyu_nrf52_errata_171(void)
{
#ifndef NRF52_SERIES
  return false;
#else
#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
  uint32_t var1 = *(uint32_t *)0x10000130ul;
  uint32_t var2 = *(uint32_t *)0x10000134ul;
#endif
#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
  if (var1 == 0x08)
  {
    switch (var2)
    {
    case 0x00ul:
      return true;
    case 0x01ul:
      return true;
    case 0x02ul:
      return true;
    case 0x03ul:
      return true;
    default:
      return true;
    }
  }
#endif
  return false;
#endif
}

/**
 * Errata: ISO double buffering not functional.
 */
static bool chyu_nrf52_errata_166(void)
{
#ifndef NRF52_SERIES
  return false;
#else
#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
  uint32_t var1 = *(uint32_t *)0x10000130ul;
  uint32_t var2 = *(uint32_t *)0x10000134ul;
#endif
#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
  if (var1 == 0x08)
  {
    switch (var2)
    {
    case 0x00ul:
      return true;
    case 0x01ul:
      return true;
    case 0x02ul:
      return true;
    case 0x03ul:
      return true;
    default:
      return true;
    }
  }
#endif
  return false;
#endif
}

#ifdef SOFTDEVICE_PRESENT

#include "nrf_mbr.h"
#include "nrf_sdm.h"
#include "nrf_soc.h"

#ifndef SD_MAGIC_NUMBER
#define SD_MAGIC_NUMBER 0x51B1E5DB
#endif

static inline bool is_sd_existed(void)
{
  return *((uint32_t *)(SOFTDEVICE_INFO_STRUCT_ADDRESS + 4)) == SD_MAGIC_NUMBER;
}

/**
 * check if SD is existed and enabled
 */
static inline bool is_sd_enabled(void)
{
  if (!is_sd_existed())
    return false;

  uint8_t sd_en = false;
  (void)sd_softdevice_is_enabled(&sd_en);
  return sd_en;
}
#endif

static bool hfclk_running(void)
{
#ifdef SOFTDEVICE_PRESENT
  if (is_sd_enabled())
  {
    uint32_t is_running = 0;
    (void)sd_clock_hfclk_is_running(&is_running);
    return (is_running ? true : false);
  }
#endif

#if defined(CLOCK_HFCLKSTAT_SRC_Xtal) || defined(__NRFX_DOXYGEN__)
  return (NRF_CLOCK->HFCLKSTAT & (CLOCK_HFCLKSTAT_STATE_Msk | CLOCK_HFCLKSTAT_SRC_Msk)) ==
         (CLOCK_HFCLKSTAT_STATE_Msk | (CLOCK_HFCLKSTAT_SRC_Xtal << CLOCK_HFCLKSTAT_SRC_Pos));
#else
  return (NRF_CLOCK->HFCLKSTAT & (CLOCK_HFCLKSTAT_STATE_Msk | CLOCK_HFCLKSTAT_SRC_Msk)) ==
         (CLOCK_HFCLKSTAT_STATE_Msk | (CLOCK_HFCLKSTAT_SRC_HFXO << CLOCK_HFCLKSTAT_SRC_Pos));
#endif
}

enum
{
  NRF_CLOCK_EVENT_HFCLKSTARTED = offsetof(NRF_CLOCK_Type, EVENTS_HFCLKSTARTED), /*!< HFCLK oscillator started. */
};

enum
{
  NRF_CLOCK_TASK_HFCLKSTART = offsetof(NRF_CLOCK_Type, TASKS_HFCLKSTART), /*!< Start HFCLK clock source. */
  NRF_CLOCK_TASK_HFCLKSTOP = offsetof(NRF_CLOCK_Type, TASKS_HFCLKSTOP),   /*!< Stop HFCLK clock source. */
};

static void hfclk_enable(void)
{
  /*!< already running, nothing to do */
  if (hfclk_running())
    return;

#ifdef SOFTDEVICE_PRESENT
  if (is_sd_enabled())
  {
    (void)sd_clock_hfclk_request();
    return;
  }
#endif

  *((volatile uint32_t *)((uint8_t *)NRF_CLOCK + NRF_CLOCK_EVENT_HFCLKSTARTED)) = 0x0UL;
  volatile uint32_t dummy = *((volatile uint32_t *)((uint8_t *)NRF_CLOCK + (uint32_t)NRF_CLOCK_EVENT_HFCLKSTARTED));
  (void)dummy;
  *((volatile uint32_t *)((uint8_t *)NRF_CLOCK + NRF_CLOCK_TASK_HFCLKSTART)) = 0x1UL;
}

static void hfclk_disable(void)
{
#ifdef SOFTDEVICE_PRESENT
  if (is_sd_enabled())
  {
    (void)sd_clock_hfclk_release();
    return;
  }
#endif

  *((volatile uint32_t *)((uint8_t *)NRF_CLOCK + NRF_CLOCK_TASK_HFCLKSTOP)) = 0x1UL;
}

/**
 * Power & Clock Peripheral on nRF5x to manage USB
 * USB Bus power is managed by Power module, there are 3 VBUS power events:
 * Detected, Ready, Removed. Upon these power events, This function will
 * enable ( or disable ) usb & hfclk peripheral, set the usb pin pull up
 * accordingly to the controller Startup/Standby Sequence in USBD 51.4 specs.
 * Therefore this function must be called to handle USB power event by
 * - nrfx_power_usbevt_init() : if Softdevice is not used or enabled
 * - SoftDevice SOC event : if SD is used and enabled
 */
void cherry_usb_hal_nrf_power_event(uint32_t event)
{
  enum
  {
    USB_EVT_DETECTED = 0,
    USB_EVT_REMOVED = 1,
    USB_EVT_READY = 2
  };

  switch (event)
  {
  case USB_EVT_DETECTED:
    if (!NRF_USBD->ENABLE)
    {
      /*!< Prepare for receiving READY event: disable interrupt since we will blocking wait */
      NRF_USBD->INTENCLR = USBD_INTEN_USBEVENT_Msk;
      NRF_USBD->EVENTCAUSE = USBD_EVENTCAUSE_READY_Msk;
      __ISB();
      __DSB();

#ifdef NRF52_SERIES /*!< NRF53 does not need this errata */
      /*!< ERRATA 171, 187, 166 */
      if (chyu_nrf52_errata_187())
      {
        if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
        {
          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
          *((volatile uint32_t *)(0x4006ED14)) = 0x00000003;
          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
        }
        else
        {
          *((volatile uint32_t *)(0x4006ED14)) = 0x00000003;
        }
      }

      if (chyu_nrf52_errata_171())
      {
        if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
        {
          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
          *((volatile uint32_t *)(0x4006EC14)) = 0x000000C0;
          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
        }
        else
        {
          *((volatile uint32_t *)(0x4006EC14)) = 0x000000C0;
        }
      }
#endif

      /*!< Enable the peripheral (will cause Ready event) */
      NRF_USBD->ENABLE = 1;
      __ISB();
      __DSB();

      /*!< Enable HFCLK */
      hfclk_enable();
    }
    break;

  case USB_EVT_READY:
    /**
     * Skip if pull-up is enabled and HCLK is already running.
     * Application probably call this more than necessary.
     */
    if (NRF_USBD->USBPULLUP && hfclk_running())
      break;

    /*!< Waiting for USBD peripheral enabled */
    while (!(USBD_EVENTCAUSE_READY_Msk & NRF_USBD->EVENTCAUSE))
    {
    }

    NRF_USBD->EVENTCAUSE = USBD_EVENTCAUSE_READY_Msk;
    __ISB();
    __DSB();

#ifdef NRF52_SERIES
    if (chyu_nrf52_errata_171())
    {
      if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
      {
        *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
        *((volatile uint32_t *)(0x4006EC14)) = 0x00000000;
        *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
      }
      else
      {
        *((volatile uint32_t *)(0x4006EC14)) = 0x00000000;
      }
    }

    if (chyu_nrf52_errata_187())
    {
      if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
      {
        *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
        *((volatile uint32_t *)(0x4006ED14)) = 0x00000000;
        *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
      }
      else
      {
        *((volatile uint32_t *)(0x4006ED14)) = 0x00000000;
      }
    }

    if (chyu_nrf52_errata_166())
    {
      *((volatile uint32_t *)(NRF_USBD_BASE + 0x800)) = 0x7E3;
      *((volatile uint32_t *)(NRF_USBD_BASE + 0x804)) = 0x40;

      __ISB();
      __DSB();
    }
#endif

    /*!< ISO buffer Lower half for IN, upper half for OUT */
    NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN;

    /*!< Enable bus-reset interrupt */
    NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk;

    /*!< Enable interrupt, priorities should be set by application */
    /*!< clear pending irq */
    NVIC->ICPR[(((uint32_t)USBD_IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)USBD_IRQn) & 0x1FUL));
    /**
     * Don't enable USBD interrupt yet, if dcd_init() did not finish yet
     * Interrupt will be enabled by tud_init(), when USB stack is ready
     * to handle interrupts.
     */
    /*!< Wait for HFCLK */
    while (!hfclk_running())
    {
    }

    /*!< Enable pull up */
    NRF_USBD->USBPULLUP = 1;
    __ISB();
    __DSB();
    break;

  case USB_EVT_REMOVED:
    if (NRF_USBD->ENABLE)
    {
      /*!< Disable pull up */
      NRF_USBD->USBPULLUP = 0;
      __ISB();
      __DSB();

      /*!< Disable Interrupt */
      NVIC->ICER[(((uint32_t)USBD_IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)USBD_IRQn) & 0x1FUL));
      __DSB();
      __ISB();
      /*!< disable all interrupt */
      NRF_USBD->INTENCLR = NRF_USBD->INTEN;

      NRF_USBD->ENABLE = 0;
      __ISB();
      __DSB();
      hfclk_disable();
    }
    break;

  default:
    break;
  }
}