Merge pull request #783 from eclipse-threadx/devv6.5.2.202603_rel

Merged changes ahead of the v6.5.2.202603 release

1 files changed, 189 insertions, 0 deletions

diff --git a/test/posix/cmake/run.sh b/test/posix/cmake/run.sh
new file mode 100755
index 00000000..76536cf7
--- /dev/null
+++ b/test/posix/cmake/run.sh
@@ -0,0 +1,189 @@
+#!/bin/bash
+##############################################################################
+# Copyright (c) 2026 Eclipse ThreadX contributors
+#
+# This program and the accompanying materials are made available under the
+# terms of the MIT License which is available at
+# https://opensource.org/licenses/MIT.
+#
+# AI Disclosure: This file was largely AI-generated by Claude Code (Opus 5).
+# The AI-generated portions may be considered public domain (CC0-1.0)
+# and not subject to the project's licence. The human contributor has
+# reviewed and verified that the code is correct.
+#
+# SPDX-License-Identifier: MIT and CC0-1.0
+##############################################################################
+
+
+set -e
+
+# POSIX compatibility layer regression test build/test runner.
+# Usage: run.sh <arch> <build|test> [all|<config> ...]
+#   arch: riscv32
+#
+# Only riscv32 is available: the layer cannot carry a 64-bit message pointer
+# without TX_64_BIT, and TX_64_BIT needs a port that declares
+# tx_thread_extension_ptr. See the comment in ../CMakeLists.txt.
+
+function help() {
+    echo "Usage: $0 <arch> <command> [all|<build_configuration> ...]"
+    echo ""
+    echo "  arch:    riscv32"
+    echo "  command: build | test"
+    echo ""
+    echo "Available build configurations:"
+    for build in ${build_configurations[*]}; do
+        echo "  $build"
+    done
+    exit 1
+}
+
+function validate() {
+    for build in ${build_configurations[*]}; do
+        if [ "$1" == "$build" ]; then
+            return
+        fi
+    done
+    help
+}
+
+function generate() {
+    local arch=$1
+    local build=$2
+    local toolchain_file
+    local build_dir
+
+    toolchain_file="${REPO_ROOT}/cmake/riscv32_gnu.cmake"
+
+    build_dir="build/${arch}_${build}"
+    cmake -B"$build_dir" -GNinja \
+        -DCMAKE_TOOLCHAIN_FILE="$toolchain_file" \
+        -DCMAKE_BUILD_TYPE="$build" \
+        .
+}
+
+function build() {
+    local arch=$1
+    local build=$2
+    # -k 0 keeps Ninja going after a target fails, so one broken target no
+    # longer decides whether the targets after it exist. ctest reports a
+    # missing binary as a failing test, which turned a single link error into
+    # a failure count that varied with build scheduling order.
+    cmake --build "build/${arch}_${build}" -- -k 0
+}
+
+function run_test() {
+    local arch=$1
+    local build=$2
+    local parallel_jobs=$3
+
+    # Guard the pushd: with the caller capturing this function's status, set -e
+    # no longer aborts here, so a missing build directory would otherwise let
+    # ctest run in the source tree and report "no tests" as success.
+    pushd "build/${arch}_${build}" || return 1
+    [ -z "${CTEST_PARALLEL_LEVEL}" ] && parallel="-j${parallel_jobs}"
+    if [ -z "${CTEST_REPEAT_FAIL}" ]; then
+        repeat_fail=2
+    else
+        repeat_fail=${CTEST_REPEAT_FAIL}
+    fi
+    # ctest's status is captured and returned past the popd and the summary
+    # steps, which all succeed. Without this the function would return 0 and a
+    # failing configuration would be reported as a pass.
+    local status=0
+    ctest $parallel --timeout 1000 \
+        -O "${arch}_${build}.txt" \
+        -T test --no-compress-output \
+        --test-output-size-passed 4194304 \
+        --test-output-size-failed 4194304 \
+        --output-on-failure \
+        --repeat until-pass:${repeat_fail} \
+        --output-junit "${arch}_${build}.xml" || status=$?
+    popd
+    return $status
+}
+
+# Determine repo root and script directory
+SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
+REPO_ROOT="$(cd "${SCRIPT_DIR}/../../.." && pwd)"
+cd "$SCRIPT_DIR"
+
+# Parse build configurations from CMakeLists.txt
+result=$(sed -n "/(BUILD_CONFIGURATIONS/,/)/p" CMakeLists.txt | sed ':label;N;s/\n/ /;b label' | grep -Pzo "[a-zA-Z0-9_]*build[a-zA-Z0-9_]*\s*" | tr -d '\0')
+IFS=' '
+read -ra build_configurations <<< "$result"
+
+if [ $# -lt 2 ]; then
+    help
+fi
+
+arch=$1
+shift
+
+if [ "$arch" != "riscv32" ]; then
+    echo "Error: arch must be 'riscv32'"
+    help
+fi
+
+command=$1
+shift
+
+if [ "$#" == "0" ]; then
+    builds=${build_configurations[0]}
+elif [ "$*" == "all" ]; then
+    builds=${build_configurations[@]}
+else
+    for item in $*; do
+        validate "$item"
+    done
+    builds=$*
+fi
+
+if [ "$command" == "build" ]; then
+    for item in $builds; do
+        generate "$arch" "$item"
+        echo ""
+    done
+
+    # A failing configuration must not stop the ones after it: under set -e
+    # the loop would abort and leave them unbuilt, which then reads as a wall
+    # of missing-binary test failures. The status is accumulated and returned.
+    build_status=0
+    for item in $builds; do
+        echo "Building ${arch} ${item}"
+        build "$arch" "$item" || build_status=$?
+        echo ""
+    done
+    [ $build_status -eq 0 ] || exit $build_status
+elif [ "$command" == "test" ]; then
+    cores=$(nproc)
+    if [ -z "${CTEST_PARALLEL_LEVEL}" ]; then
+        build_counts=$(echo $builds | wc -w)
+        parallel_jobs=$(($cores / $build_counts))
+        parallel_jobs=$(($parallel_jobs + 2))
+        pids=""
+        for item in $builds; do
+            echo "Testing ${arch} ${item}"
+            run_test "$arch" "$item" "$parallel_jobs" &
+            pids+=" $!"
+        done
+        exit_code=0
+        for p in $pids; do
+            wait $p || exit_code=$?
+        done
+        exit $exit_code
+    else
+        # ctest's status is accumulated rather than allowed to abort the loop.
+        # set -e would otherwise stop at the first failing configuration and
+        # leave every configuration after it untested. This mirrors what the
+        # parallel branch above already does with wait.
+        exit_code=0
+        for item in $builds; do
+            echo "Testing ${arch} ${item}"
+            run_test "$arch" "$item" "$parallel_jobs" || exit_code=$?
+        done
+        exit $exit_code
+    fi
+else
+    help
+fi