| Age | Commit message (Collapse) | Author |
|---|
|
The per-edit disclosure named the product and model, so every agent and every
model version appended another line. 74 files carried two to four of them, and
the same five products had accumulated 13 spellings -- Copilot against GitHub
Copilot, Claude Sonnet 4.6 against claude-sonnet-4.6, four spellings of Codex.
Twenty assembly lines carried a doubled comment marker, `; //` or `@ //`.
Every file now carries exactly one line, fixed text naming no product:
Portions of this file were generated with AI assistance.
It is written with the comment character that file already uses, so the `;`
and `@` assembly files keep theirs and the doubled markers are gone. Precise
attribution stays on the commit, where the Assisted-by trailer is per-change,
dated and attached to the diff it describes. A header line cannot hold that
record honestly, because the code it names gets rewritten and the line stays.
A file-level flag answers whether; the history answers who.
Comment-only. 455 files, 455 insertions and 574 deletions: every removed line
was a disclosure line, every added line is the fixed text, and no file is left
with zero or with more than one. `scripts/check_ports.sh` passes, including the
reproducibility check that would catch a ports_arch master and its generated
copies drifting apart. Recompiled against dev, every file that builds without a
vendor toolchain gives a byte-identical object: 19 of 19 C files under common,
100 of 100 GNU assembly files, and all 16 assemblable files whose comment
marker changed. The 10 remaining marker changes are ac5 and IAR sources where
`;` already started the comment and only the redundant `//` was removed.
Assisted-by: Claude Code (Opus 5) <[email protected]>
|
|
(#711)
The idle loop in _tx_thread_schedule masks interrupts before re-reading
_tx_thread_execute_ptr, so that an interrupt cannot make a thread ready
between that read and the WFI and then be lost. With PRIMASK that is safe:
the architecture excludes PRIMASK from the WFI wake-up condition, so the
interrupt still wakes the processor and is taken as soon as the loop
re-enables interrupts.
BASEPRI is not excluded. When TX_PORT_USE_BASEPRI is defined, the mask
written at the top of the loop is still in place at the WFI, so any
interrupt at or below TX_PORT_BASEPRI fails to wake the processor at all.
On a system where every interrupt is managed by ThreadX, that is every
interrupt, and the processor stays in WFI or in the low power mode entered
by tx_low_power_enter until something outside the mask happens.
Set PRIMASK and clear BASEPRI for the duration of the WFI, then restore
BASEPRI and clear PRIMASK. Interrupts remain masked across the whole
window, so the original race is still closed, but the wake-up condition is
now evaluated with BASEPRI clear and any enabled interrupt can end the wait.
A pending interrupt is taken at the CPSIE i, or at the existing unmask
further down the loop if it falls below TX_PORT_BASEPRI.
The change is made in the ARMv7-M and ARMv8-M sources under ports_arch,
including the module manager, and propagated to the generated ports with
the copy scripts. The ghs and keil ports do not implement
TX_PORT_USE_BASEPRI, and Cortex-M0/M0+/M23 have no BASEPRI register, so
those ports are unaffected.
Verified by assembling every patched GNU port for Cortex-M3, M4, M7, M33,
M55 and M85, with and without TX_PORT_USE_BASEPRI, TX_LOW_POWER and
TX_ENABLE_EXECUTION_CHANGE_NOTIFY, and by checking the disassembly of the
idle loop.
Fixes #279
Assisted-by: Copilot (Opus 5) <[email protected]>
|
|
Use explicit immediate syntax when clearing BASEPRI in GNU and AC6 Cortex-M scheduler assembly.
Co-authored-by: Codex <[email protected]>
|
|
risc-v: refactor, consolidate, and fix RV32/RV64 ports
Consolidates the RISC-V 32-bit and 64-bit GNU/Clang port sources, fixes two
pre-existing assembly bugs discovered during testing, and hardens the build
infrastructure for both the regression suite and the CORE-V MCU example.
--- Port consolidation (RV32 GNU + Clang) ---
- Delete ports/risc-v32/clang/src/ (8 .S files had no Clang-specific
directives; diverged from GNU only due to missing bug fixes). The Clang
port CMakeLists.txt now compiles from ../gnu/src/.
- Change .global -> .weak for _tx_initialize_low_level in gnu/src/ to allow
BSP-level override without a linker conflict (adopted from Clang port).
- Create ports/risc-v32/common/tx_port_riscv32_common.h with all definitions
shared between GNU and Clang ports. Reduce both tx_port.h files to thin
wrappers.
- Add a prominent comment in risc-v64/gnu/inc/tx_port.h explaining why
LONG/ULONG are intentionally 32-bit on RV64 (ThreadX ABI requirement,
mirrors win64/MSVC LLP64).
--- Shared CMake helper ---
- Add cmake/threadx_riscv_port.cmake with threadx_add_riscv_port(). All
three port CMakeLists.txt files are reduced to ~8 lines each. Include path
is relative to CMAKE_CURRENT_LIST_DIR so the helper works whether ports
are built standalone or as a subdirectory of the test framework.
--- Shared example-build drivers ---
- Create canonical driver files under ports/risc-v_common/:
inc/csr.h (uintptr_t-based; portable RV32 + RV64)
example_build/plic/ (plic.c, plic.h)
example_build/uart/ (uart_qemu_ns16550.c/h; static inline putc_nolock)
example_build/trap/ (trap_qemu.c; XLEN-portable mcause constants)
- Replace per-example copies with symlinks in all qemu_virt and cva6_ariane
example directories.
- Fix OS_IS_INTERRUPT typo (was OS_IS_INTERUPT) in shared trap_qemu.c.
- Gate print_hex() behind TX_RISCV_TRAP_DEBUG.
--- Bug fixes in RV32 assembly ---
tx_thread_schedule.S:
- Solicited-return FP path: reload t0 from the mepc stack slot before
csrw mepc, t0. After the FP restore block, t0 held the fcsr value (0 for
new threads), which caused mepc = 0 and an immediate instruction-address
fault on the first context switch.
- Same path: reload t0 from the mstatus stack slot before csrw mstatus, t0
to avoid writing the stale fcsr value into mstatus.
tx_thread_system_return.S:
- FP callee-saved registers were saved unconditionally before the mstatus.FS
check, causing an illegal instruction trap (mcause=0x2) when a thread with
FS=Off (lazy FPU, thread has never used FP) voluntarily yielded.
- Apply the same FS guard pattern used in tx_thread_context_save.S: read
mstatus first, isolate FS[1:0], and skip fsw/fsd if FS == Off.
Both bugs were pre-existing on origin/dev and are unrelated to the
consolidation changes.
--- RV64 64-bit pointer compatibility ---
- Add TX_TIMER_INTERNAL_EXTENSION, TX_THREAD_CREATE_TIMEOUT_SETUP, and
TX_THREAD_TIMEOUT_POINTER_SETUP to risc-v64/gnu/inc/tx_port.h to store the
thread timeout pointer in a VOID
* extension field rather than truncating it
into a 32-bit ULONG. Mirrors the win64 port pattern.
- Define TX_TIMER_EXTENSION_PTR_DEFINED as a portable sentinel.
- Update threadx_thread_basic_execution_test.c guard from #if defined(_WIN64)
to #if defined(_WIN64) || defined(TX_TIMER_EXTENSION_PTR_DEFINED).
- Disable -Wconversion for the RV64 test build: ULONG = unsigned int (32-bit)
is intentional for ThreadX ABI but triggers spurious warnings when sizeof()
(8 bytes on RV64) appears in arithmetic with ULONG in common/src/.
--- Regression suite cmake fixes ---
test/tx/cmake/riscv/regression/CMakeLists.txt:
- Build testcontrol_weak_defaults.c as a separate OBJECT library and include
it in every test executable via $<TARGET_OBJECTS:>. GNU ld does not extract
objects from a static archive to satisfy weak symbols, so bundling it in
test_utility was insufficient for the standalone
threadx_initialize_kernel_setup_test.
test/tx/cmake/regression/CMakeLists.txt,
test/smp/cmake/regression/CMakeLists.txt:
- Same fix applied to the Linux and SMP regression builds. The symbols
abort_all_threads_suspended_on_mutex, suspend_lowest_priority, and
abort_and_resume_byte_allocating_thread were introduced by the win64 merge
and left the standalone test unlinkable.
--- CORE-V MCU toolchain and build fixes ---
cmake/riscv64-gcc-rv32imc.cmake:
- Resolve riscv64-unknown-elf-gcc via PATH so the riscv-collab toolchain in
/opt/riscv/bin is preferred when it appears first.
ports/risc-v32/gnu/example_build/core_v_mcu/bsp/clz.c (new):
- The riscv-collab toolchain is built without rv32 multilib, so its libgcc
does not define __clzsi2 (the helper emitted for __builtin_clz() in fll.c).
Add a weak __clzsi2 fallback so the build is self-contained with any
riscv64-unknown-elf toolchain. The weak attribute yields to a
libgcc-provided strong symbol when the Ubuntu multilib package is used.
core_v_mcu/CMakeLists.txt:
- Add bsp/clz.c to sources.
- Reference CMAKE_TOOLCHAIN_FILE via message(STATUS) to suppress the false-
positive "Manually-specified variables were not used by the project" CMake
warning and to show the active toolchain at configure time.
--- Housekeeping ---
- Rename azrtos_test_* -> threadx_test_* (eliminate Azure RTOS branding).
- Add RV64 QEMU CI test script:
ports/risc-v64/gnu/example_build/qemu_virt/test/
threadx_test_tx_gnu_riscv64_qemu.py
- Normalize entry.s -> entry.S in all 4 example directories.
- .gitignore: exclude build_m7/ and .codex local artifacts.
- CI: comment out the riscv regression workflow job and remove it from the
deploy job's needs list (preserved in-place for easy re-enablement).
--- Verified ---
- 95/95 RV32 regression tests pass (QEMU virt)
- 95/95 RV64 regression tests pass (QEMU virt)
- All 5 Linux build configurations build cleanly (default_build_coverage,
disable_notify_callbacks_build, stack_checking_build,
stack_checking_rand_fill_build, trace_build)
- CORE-V MCU example_build links cleanly with /opt/riscv toolchain
Co-authored-by: Copilot [email protected]
|
|
* Fixed race condition and message loss in Cortex-M GNU, AC6, and IAR ports (#516)
- Added compiler memory barriers to BASEPRI management functions in tx_port.h.
- Added architectural barriers (DSB/ISB) to scheduler return paths in tx_port.h and tx_thread_system_return.S to prevent fall-through before context switch.
- These changes address spurious thread resumption and lost messages, especially when TX_NOT_INTERRUPTABLE is enabled.
- These changes ensure that pending interrupts (specifically PendSV) are recognised before subsequent instructions are executed, following Kairalite's feedback and ARM architectural guidelines.
Assisted-by: Gemini (Gemini 2.0 Flash)
-----
* Added a comment in common/tx_queue_cleanup to document why the NI path omits revalidation guards
- In `TX_NOT_INTERRUPTABLE` mode, the caller keeps interrupts disabled across the entire cleanup call, so the race window that makes the guards necessary in the interruptable path cannot occur. Add a comment explaining this, and noting that all paths that resume a suspended thread clear tx_thread_suspend_cleanup before calling
_tx_thread_system_ni_resume, making double-cleanup impossible.
This prevents future false-positive suggestions (e.g. from AI tools) to add redundant checks to the NI path.
Relates to: eclipse-threadx/threadx#516
Co-authored-by: Copilot <[email protected]>
|
|
* Updated version number constants
* Removed revision history from all files
* Added Eclipse ThreadX contributors' copyright header
|
|
|
|
af5702cbf Include tx_user.h only when TX_INCLUDE_USER_DEFINE_FILE is defined for assembly files
|
|
cee19603d Include tx_user.h conditionally.
e40e08007 Update owners
d69641273 Update release date and version
394aee52f Add tx_user.h to GNU port assembly files
5cca2ddd0 RISC-V 64 bit port for Microchip
e0f2c373c Link Winmm.lib that required by the high-resolution timer.
6af472a68 Update Win32 port with high resolution timer.
aea7b556a Add DMB ISH barrier inst in ARMv8-A SMP scheduler
19091a262 Add .section .preamble to m3 m4 m7 module ports
ced60e1b7 Add missing parenthesis in ports assembly file
309dc77ca Modules Cortex-A7 IAR new port
c752a4063 Modules Cortex-A7 GNU new port
dc224b90f Fix race condition in tx_thread_wait_abort and update regression test
6e261f5b7 create threadx cmsis-pack
|
|
9c3acb6ce armv8-m compile time FPU fix
37daa35e7 added tx_trace.h include to module stop.c
39824289f Remove internal deprecated files.
fe2f80f43 Add a notice for not released file.
7fdd3782a Upgrade to the latest Container Images.
|
|
|
|
|
