| Age | Commit message (Collapse) | Author |
|---|
|
Polling UART output held machine interrupts off for an entire string, which
could lose ThreadX ticks. PLIC enable-word changes could overwrite an update
made by an interrupt handler.
The UART now polls with interrupts enabled and protects only the final status
check and byte write. PLIC enable and disable changes are protected across
their read-modify-write. The README explains the new simulator tests.
Both simulator tests failed on the original code and passed with these fixes.
The 100-million-cycle demo run reported all eight threads and five thread 0
wakeups. AI disclosure and port consistency checks passed. No silicon run.
Assisted-by: Codex (GPT-6-Sol) <[email protected]>
|
|
Long polling UART writes can mask timer interrupts across several tick periods.
PLIC enable-word updates can overwrite a change made by an interrupt handler.
The board example had no simulator tests for either case.
Added two simulator images and a runner. One compares hardware timer progress with
ThreadX ticks after a long print. The other toggles one PLIC source in timer
context while a thread changes another. Both tests fail on the PR code and pass
with the corresponding local fixes.
GCC 15.2.0 and Ninja built both images. erbium_emu reproduced both failures;
control runs passed both tests. Port consistency checks passed. No silicon run.
Assisted-by: Codex (GPT-6-Sol) <[email protected]>
|
|
ThreadX had no board support for Erbium, the OpenHW Foundation CORE-ET RISC-V platform
that Zephyr and NuttX support. Its hart implements only part of the F extension, needs a
4 KiB aligned mtvec and uses the original Shakti UART.
The example runs the standard demo on hart 0 in machine mode. It builds the library and
the demo for rv64imc_zicsr_zifencei with the soft-float lp64 ABI and links without libc
or libgcc, so the pinned riscv64-unknown-elf toolchain can build it. It programs the
machine timer, a polling UART console and the PLIC, writing the source priorities and
threshold that silicon hardwires because the simulator resets them to 0. No shared file
changes.
The demo built without warnings and ran on erbium_emu from et-platform 836a4ab, with all
eight threads reporting and five thread 0 wakeups in 100M cycles, which matches the 2
MHz tick. Separate test images took five PLIC UART interrupts through the ThreadX ISR
path and halted with mcause 2 on an illegal instruction. check_ai_disclosure.sh and
check_ports.sh passed.
Assisted-by: Claude Code (Opus 5.5) <[email protected]>
|
|
* spec compliance
Signed-off-by: Akif Ejaz <[email protected]>
* revert the demo changes
Signed-off-by: Akif Ejaz <[email protected]>
* Restored the FPU demo hook so the RISC-V64 functional test can pass
The new check-functional-riscv64 target verifies FPU context switching by
watching fpu_test_val advance by 1.1f on each pass through
thread_6_and_7_entry. The GDB script deliberately treats a missing symbol
as a failure rather than silently skipping the check, but the demo no
longer defined it, so the target failed on every run:
FPU_VERIFIED_FAIL_NO_SYMBOL
The definition and the increment are restored, matching what the risc-v32
demo already carries. The functional target now passes end to end.
Three small corrections are folded in:
- tx_port.h carried a comment stating that the ISA string must include
Zicsr, but nothing enforced it, so an rv64imac build failed with a wall
of assembler "unrecognized opcode" errors. It now stops at one clear
diagnostic.
- Removed TX_RISCV_TRAP_CALL_FRAME_SIZE, which nothing referenced.
- The example .gitignore listed qemu-riscv32.log, but the runner writes
qemu-riscv64.log, so the generated log showed up as an untracked file.
Assisted-by: Claude Code (Opus 5) <[email protected]>
---------
Signed-off-by: Akif Ejaz <[email protected]>
Co-authored-by: Frédéric Desbiens <[email protected]>
|
|
Applied the standard MIT license header to all project-owned C, header,
assembly, shell, and Python files that were missing a copyright notice.
Third-party, toolchain startup, and auto-generated files were excluded.
Co-authored-by: Copilot <[email protected]>
|
|
risc-v: refactor, consolidate, and fix RV32/RV64 ports
Consolidates the RISC-V 32-bit and 64-bit GNU/Clang port sources, fixes two
pre-existing assembly bugs discovered during testing, and hardens the build
infrastructure for both the regression suite and the CORE-V MCU example.
--- Port consolidation (RV32 GNU + Clang) ---
- Delete ports/risc-v32/clang/src/ (8 .S files had no Clang-specific
directives; diverged from GNU only due to missing bug fixes). The Clang
port CMakeLists.txt now compiles from ../gnu/src/.
- Change .global -> .weak for _tx_initialize_low_level in gnu/src/ to allow
BSP-level override without a linker conflict (adopted from Clang port).
- Create ports/risc-v32/common/tx_port_riscv32_common.h with all definitions
shared between GNU and Clang ports. Reduce both tx_port.h files to thin
wrappers.
- Add a prominent comment in risc-v64/gnu/inc/tx_port.h explaining why
LONG/ULONG are intentionally 32-bit on RV64 (ThreadX ABI requirement,
mirrors win64/MSVC LLP64).
--- Shared CMake helper ---
- Add cmake/threadx_riscv_port.cmake with threadx_add_riscv_port(). All
three port CMakeLists.txt files are reduced to ~8 lines each. Include path
is relative to CMAKE_CURRENT_LIST_DIR so the helper works whether ports
are built standalone or as a subdirectory of the test framework.
--- Shared example-build drivers ---
- Create canonical driver files under ports/risc-v_common/:
inc/csr.h (uintptr_t-based; portable RV32 + RV64)
example_build/plic/ (plic.c, plic.h)
example_build/uart/ (uart_qemu_ns16550.c/h; static inline putc_nolock)
example_build/trap/ (trap_qemu.c; XLEN-portable mcause constants)
- Replace per-example copies with symlinks in all qemu_virt and cva6_ariane
example directories.
- Fix OS_IS_INTERRUPT typo (was OS_IS_INTERUPT) in shared trap_qemu.c.
- Gate print_hex() behind TX_RISCV_TRAP_DEBUG.
--- Bug fixes in RV32 assembly ---
tx_thread_schedule.S:
- Solicited-return FP path: reload t0 from the mepc stack slot before
csrw mepc, t0. After the FP restore block, t0 held the fcsr value (0 for
new threads), which caused mepc = 0 and an immediate instruction-address
fault on the first context switch.
- Same path: reload t0 from the mstatus stack slot before csrw mstatus, t0
to avoid writing the stale fcsr value into mstatus.
tx_thread_system_return.S:
- FP callee-saved registers were saved unconditionally before the mstatus.FS
check, causing an illegal instruction trap (mcause=0x2) when a thread with
FS=Off (lazy FPU, thread has never used FP) voluntarily yielded.
- Apply the same FS guard pattern used in tx_thread_context_save.S: read
mstatus first, isolate FS[1:0], and skip fsw/fsd if FS == Off.
Both bugs were pre-existing on origin/dev and are unrelated to the
consolidation changes.
--- RV64 64-bit pointer compatibility ---
- Add TX_TIMER_INTERNAL_EXTENSION, TX_THREAD_CREATE_TIMEOUT_SETUP, and
TX_THREAD_TIMEOUT_POINTER_SETUP to risc-v64/gnu/inc/tx_port.h to store the
thread timeout pointer in a VOID
* extension field rather than truncating it
into a 32-bit ULONG. Mirrors the win64 port pattern.
- Define TX_TIMER_EXTENSION_PTR_DEFINED as a portable sentinel.
- Update threadx_thread_basic_execution_test.c guard from #if defined(_WIN64)
to #if defined(_WIN64) || defined(TX_TIMER_EXTENSION_PTR_DEFINED).
- Disable -Wconversion for the RV64 test build: ULONG = unsigned int (32-bit)
is intentional for ThreadX ABI but triggers spurious warnings when sizeof()
(8 bytes on RV64) appears in arithmetic with ULONG in common/src/.
--- Regression suite cmake fixes ---
test/tx/cmake/riscv/regression/CMakeLists.txt:
- Build testcontrol_weak_defaults.c as a separate OBJECT library and include
it in every test executable via $<TARGET_OBJECTS:>. GNU ld does not extract
objects from a static archive to satisfy weak symbols, so bundling it in
test_utility was insufficient for the standalone
threadx_initialize_kernel_setup_test.
test/tx/cmake/regression/CMakeLists.txt,
test/smp/cmake/regression/CMakeLists.txt:
- Same fix applied to the Linux and SMP regression builds. The symbols
abort_all_threads_suspended_on_mutex, suspend_lowest_priority, and
abort_and_resume_byte_allocating_thread were introduced by the win64 merge
and left the standalone test unlinkable.
--- CORE-V MCU toolchain and build fixes ---
cmake/riscv64-gcc-rv32imc.cmake:
- Resolve riscv64-unknown-elf-gcc via PATH so the riscv-collab toolchain in
/opt/riscv/bin is preferred when it appears first.
ports/risc-v32/gnu/example_build/core_v_mcu/bsp/clz.c (new):
- The riscv-collab toolchain is built without rv32 multilib, so its libgcc
does not define __clzsi2 (the helper emitted for __builtin_clz() in fll.c).
Add a weak __clzsi2 fallback so the build is self-contained with any
riscv64-unknown-elf toolchain. The weak attribute yields to a
libgcc-provided strong symbol when the Ubuntu multilib package is used.
core_v_mcu/CMakeLists.txt:
- Add bsp/clz.c to sources.
- Reference CMAKE_TOOLCHAIN_FILE via message(STATUS) to suppress the false-
positive "Manually-specified variables were not used by the project" CMake
warning and to show the active toolchain at configure time.
--- Housekeeping ---
- Rename azrtos_test_* -> threadx_test_* (eliminate Azure RTOS branding).
- Add RV64 QEMU CI test script:
ports/risc-v64/gnu/example_build/qemu_virt/test/
threadx_test_tx_gnu_riscv64_qemu.py
- Normalize entry.s -> entry.S in all 4 example directories.
- .gitignore: exclude build_m7/ and .codex local artifacts.
- CI: comment out the riscv regression workflow job and remove it from the
deploy job's needs list (preserved in-place for easy re-enablement).
--- Verified ---
- 95/95 RV32 regression tests pass (QEMU virt)
- 95/95 RV64 regression tests pass (QEMU virt)
- All 5 Linux build configurations build cleanly (default_build_coverage,
disable_notify_callbacks_build, stack_checking_build,
stack_checking_rand_fill_build, trace_build)
- CORE-V MCU example_build links cleanly with /opt/riscv toolchain
Co-authored-by: Copilot [email protected]
|
|
* Add BananaPi BPI-F3 BSP support
Add RISC-V supervisor support to the rv64/gnu port and
provide a complete board support package for the BananaPi BPI-F3
(SpacemiT K1 SoC, X60 cores).
Port changes (risc-v64/gnu):
- Guard all CSR accesses with TX_RISCV_SMODE to select S-mode registers
(sstatus/sepc/sie/sret) vs M-mode (mstatus/mepc/mie/mret) in
context_save, context_restore, schedule, system_return,
interrupt_control, and stack_build.
- Add S-mode TX_INT_ENABLE/TX_DISABLE and inline TX_RESTORE macros
to tx_port.h.
- Add TX_RISCV_SMODE CMake option to CMakeLists.txt.
BananaPi BPI-F3 BSP (example_build/bananapi-f3):
- Boot flow: FSBL → OpenSBI (M-mode) → U-Boot (S-mode) → ThreadX
- S-mode trap handler with context save/restore integration
- SBI legacy ecall timer at 10 Hz (24 MHz timebase)
- PLIC driver with S-mode context, stale-IRQ drain, and callbacks
- PXA-compatible UART0 console (115200 8N1)
- Linker script at 0x200000 load address
Tested on risc-v board, BananaPi BPI-F3 hardware.
Signed-off-by: Akif Ejaz <[email protected]>
* Fixed S-mode context restore and PLIC spurious IRQ handling
- tx_thread_context_restore.S (non-nested path): set SPIE(0x20) alongside
SPP(0x100) so sret re-enables interrupts in the restored thread.
- tx_thread_context_restore.S (both S-mode paths): use FS=Dirty (0x6000)
instead of FS=Initial (0x2000) to match tx_thread_schedule.S and prevent
FP register corruption across context switches.
- plic.c (plic_irq_intr): return early when plic_claim() yields 0 (no
pending interrupt) to avoid completing a spurious IRQ ID 0, which is
undefined behavior per the PLIC spec.
Co-authored-by: Copilot <[email protected]>
---------
Signed-off-by: Akif Ejaz <[email protected]>
Co-authored-by: Frédéric Desbiens <[email protected]>
Co-authored-by: Copilot <[email protected]>
|
|
Added a QEMU virt-machine BSP and CTest infrastructure to run the
ThreadX regression suite on both RISC-V 32-bit and 64-bit targets
in CI.
New components:
- BSP (entry, trap, PLIC, CLINT timer, UART, linker script) targeting
QEMU virt machine for RV32 and RV64
- CMake build system with Ninja, supporting multiple build configs
- CI scripts: install_riscv.sh (toolchain + QEMU), build_tx_riscv.sh,
test_tx_riscv.sh
- GitHub Actions workflow job for RISC-V regression gating
Port fixes:
- RV32 tx_thread_context_restore.S: set MPIE alongside MPP (0x1800 →
0x1880) so mret re-enables interrupts
- RV32/RV64 tx_port.h: add TX_REGRESSION_TEST extension macros needed
by the test harness
- RV32/RV64 example_build scripts: add compile and QEMU launch steps
Regression test portability fixes:
- Block memory tests: increase pool sizes (320 → 340) to accommodate
larger RISC-V block-header alignment
- Byte memory test: replace hardcoded offsets with BYTE_POOL_OVERHEAD
macro for portable pool-size computation
- Event flag timeout test: make counter tolerance unconditional,
removing linux-only guard
Signed-off-by: Akif Ejaz <[email protected]>
|
|
Added rv64 rvv support
|
|
|
|
* Updated version number constants
* Removed revision history from all files
* Added Eclipse ThreadX contributors' copyright header
|
|
- removed the REGBYTES, STORE/LOAD macros
Signed-off-by: Akif Ejaz <[email protected]>
|
|
|
