clean up flash-stlink

10 files changed, 10 insertions, 50 deletions

diff --git a/hw/bsp/pyboardv11/board.mk b/hw/bsp/pyboardv11/board.mk
index f57f662f8..a0b07f265 100644
--- a/hw/bsp/pyboardv11/board.mk
+++ b/hw/bsp/pyboardv11/board.mk
@@ -42,9 +42,5 @@ FREERTOS_PORT = ARM_CM4F
 JLINK_DEVICE = stm32f405rg
 JLINK_IF = swd
 
-# Path to STM32 Cube Programmer CLI, should be added into system path
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink
diff --git a/hw/bsp/stm32f070rbnucleo/board.mk b/hw/bsp/stm32f070rbnucleo/board.mk
index 07d885dcb..8a073d524 100644
--- a/hw/bsp/stm32f070rbnucleo/board.mk
+++ b/hw/bsp/stm32f070rbnucleo/board.mk
@@ -46,9 +46,5 @@ FREERTOS_PORT = ARM_CM0
 JLINK_DEVICE = stm32f070rb
 JLINK_IF = swd
 
-# Path to STM32 Cube Programmer CLI, should be added into system path 
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink
diff --git a/hw/bsp/stm32f072disco/board.mk b/hw/bsp/stm32f072disco/board.mk
index cae3b5621..522459d61 100644
--- a/hw/bsp/stm32f072disco/board.mk
+++ b/hw/bsp/stm32f072disco/board.mk
@@ -47,9 +47,5 @@ FREERTOS_PORT = ARM_CM0
 JLINK_DEVICE = stm32f072rb
 JLINK_IF = swd
 
-# Path to STM32 Cube Programmer CLI, should be added into system path 
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink
diff --git a/hw/bsp/stm32f207nucleo/board.mk b/hw/bsp/stm32f207nucleo/board.mk
index 2eb92f175..9eaff8548 100644
--- a/hw/bsp/stm32f207nucleo/board.mk
+++ b/hw/bsp/stm32f207nucleo/board.mk
@@ -45,9 +45,5 @@ FREERTOS_PORT = ARM_CM3
 JLINK_DEVICE = stm32f207zg
 JLINK_IF = swd
 
-# Path to STM32 Cube Programmer CLI, should be added into system path 
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink
diff --git a/hw/bsp/stm32f303disco/board.mk b/hw/bsp/stm32f303disco/board.mk
index 61c851031..07312ac82 100644
--- a/hw/bsp/stm32f303disco/board.mk
+++ b/hw/bsp/stm32f303disco/board.mk
@@ -46,9 +46,5 @@ FREERTOS_PORT = ARM_CM4F
 JLINK_DEVICE = stm32f303vc
 JLINK_IF = swd
 
-# Path to STM32 Cube Programmer CLI, should be added into system path 
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink
diff --git a/hw/bsp/stm32f407disco/board.mk b/hw/bsp/stm32f407disco/board.mk
index e80e84bcb..9800b9cb2 100644
--- a/hw/bsp/stm32f407disco/board.mk
+++ b/hw/bsp/stm32f407disco/board.mk
@@ -42,9 +42,5 @@ FREERTOS_PORT = ARM_CM4F
 JLINK_DEVICE = stm32f407vg
 JLINK_IF = swd
 
-# Path to STM32 Cube Programmer CLI, should be added into system path
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink
diff --git a/hw/bsp/stm32f411disco/board.mk b/hw/bsp/stm32f411disco/board.mk
index eb5714748..16d90e086 100644
--- a/hw/bsp/stm32f411disco/board.mk
+++ b/hw/bsp/stm32f411disco/board.mk
@@ -42,9 +42,5 @@ FREERTOS_PORT = ARM_CM4F
 JLINK_DEVICE = stm32f411ve
 JLINK_IF = swd
 
-# Path to STM32 Cube Programmer CLI, should be added into system path
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink
diff --git a/hw/bsp/stm32f412disco/board.mk b/hw/bsp/stm32f412disco/board.mk
index 9b54ab55c..2976464f4 100644
--- a/hw/bsp/stm32f412disco/board.mk
+++ b/hw/bsp/stm32f412disco/board.mk
@@ -46,9 +46,5 @@ FREERTOS_PORT = ARM_CM4F
 JLINK_DEVICE = stm32f41zx
 JLINK_IF = swd
 
-# Path to STM32 Cube Programmer CLI, should be added into system path
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink
diff --git a/hw/bsp/stm32f767nucleo/board.mk b/hw/bsp/stm32f767nucleo/board.mk
index 152e0bdbb..8d733b9b9 100644
--- a/hw/bsp/stm32f767nucleo/board.mk
+++ b/hw/bsp/stm32f767nucleo/board.mk
@@ -41,9 +41,5 @@ INC += \
 VENDOR = st
 CHIP_FAMILY = synopsys
 
-# Path to STM32 Cube Programmer CLI, should be added into system path
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink
diff --git a/hw/bsp/stm32h743nucleo/board.mk b/hw/bsp/stm32h743nucleo/board.mk
index 928ad9a83..a45c667d3 100644
--- a/hw/bsp/stm32h743nucleo/board.mk
+++ b/hw/bsp/stm32h743nucleo/board.mk
@@ -40,9 +40,5 @@ INC += \
 VENDOR = st
 CHIP_FAMILY = synopsys
 
-# Path to STM32 Cube Programmer CLI, should be added into system path
-STM32Prog = STM32_Programmer_CLI
-
 # flash target using on-board stlink
-flash: $(BUILD)/$(BOARD)-firmware.elf
-	$(STM32Prog) --connect port=swd --write $< --go
+flash: flash-stlink