update fsp to version 4.5, correct RA BSP. Fix ETM Trace with 6m5 by lowering PLL to 128Mhz.

12 files changed, 142 insertions, 70 deletions

diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake
index b2e61a824..5b97eb5e4 100644
--- a/hw/bsp/family_support.cmake
+++ b/hw/bsp/family_support.cmake
@@ -227,6 +227,10 @@ function(family_add_tinyusb TARGET OPT_MCU RTOS)
 
   if (DEFINED LOG)
     target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_DEBUG=${LOG})
+    if (LOG STREQUAL "3")
+      # no inline for debug level 3
+      target_compile_definitions(${TARGET}-tinyusb_config INTERFACE TU_ATTR_ALWAYS_INLINE=)
+    endif ()
   endif()
 
   if (RTOS STREQUAL "freertos")
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
index 700d9b29f..19bb473eb 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -31,12 +31,6 @@
 #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED	(1)
 #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
 
-#define BSP_FEATURE_BSP_HAS_SCISPI_CLOCK 0
-
-#define BSP_FEATURE_TFU_SUPPORTED 0
-#define BSP_TZ_SECURE_BUILD    (0)
-#define BSP_TZ_NONSECURE_BUILD (0)
-
 // for SystemInit()
 void bsp_init(void * p_args);
 
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h
index 930fa3547..554126523 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h
@@ -7,7 +7,7 @@
 #define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
 #define BSP_CFG_HOCO_FREQUENCY (0) /* HOCO 24MHz */
 #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */
-#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL_8_0) /* PLL Mul x8 */
+#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(8u,0u)) /* PLL Mul x8 */
 #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
 #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
 #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.h b/hw/bsp/ra/boards/ra6m1_ek/board.h
index 2765a6a5f..f73a08fc0 100644
--- a/hw/bsp/ra/boards/ra6m1_ek/board.h
+++ b/hw/bsp/ra/boards/ra6m1_ek/board.h
@@ -38,12 +38,10 @@ extern "C" {
 #define BUTTON_STATE_ACTIVE   0
 
 static const ioport_pin_cfg_t board_pin_cfg[] = {
-    {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
-    {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
-    // USB FS D+, D-, VBus
-    {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
-    {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
-    {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT },
+    { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT },
+    // USB FS
+    { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS },
 };
 
 #ifdef __cplusplus
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
index c2b23b16c..75a331fc2 100644
--- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -60,13 +60,6 @@ extern "C" {
 #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
 #endif
 
-#define BSP_FEATURE_BSP_HAS_SCISPI_CLOCK 0
-#define BSP_FEATURE_TFU_SUPPORTED 0
-#define BSP_TZ_SECURE_BUILD    (0)
-#define BSP_TZ_NONSECURE_BUILD (0)
-
-#define BSP_CFG_USE_LOW_VOLTAGE_MODE 0
-
 // for SystemInit()
 void bsp_init(void * p_args);
 
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
index 1cdfae949..945a6010b 100644
--- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
@@ -7,7 +7,7 @@
 #define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
 #define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */
 #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_1) /* PLL Div /1 */
-#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL_20_0 /* PLL Mul x20.0 */
+#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL Mul x20.0 */
 #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
 #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */
 #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.h b/hw/bsp/ra/boards/ra6m5_ek/board.h
index c88e9a0a2..779f71810 100644
--- a/hw/bsp/ra/boards/ra6m5_ek/board.h
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.h
@@ -41,22 +41,24 @@ static const ioport_pin_cfg_t board_pin_cfg[] = {
     { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW },
     { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT },
 
-    // USB FS D+, D-, VBus
+    // USB FS
     { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH },
     { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
     { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
 
-    // USB HS D+, D-, VBus
+    // USB HS
     { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS },
     { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
     { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
 
     // ETM Trace
-    { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
-    { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
-    { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
-    { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
-    { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
+    #ifdef TRACE_ETM
+    { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+     #endif
 };
 
 #ifdef __cplusplus
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
index 77ac41d0a..9bb496dd6 100644
--- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
@@ -1,35 +1,45 @@
 /* generated configuration header file - do not edit */
 #ifndef BSP_CLOCK_CFG_H_
 #define BSP_CLOCK_CFG_H_
-#define BSP_CFG_CLOCKS_SECURE (0)
+
+#define BSP_CFG_CLOCKS_SECURE   (0)
 #define BSP_CFG_CLOCKS_OVERRIDE (0)
-#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */
-#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */
-#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
-#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */
-#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL_25_0 /* PLL Mul x25.0 */
-#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
-#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */
-#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL_20_0 /* PLL2 Mul x20.0 */
-#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
-#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
-#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */
-#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* U60CK Disabled */
-#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */
-#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */
-#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */
-#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
-#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */
-#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */
-#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */
-#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */
-#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */
-#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */
-#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */
-#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
-#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */
-#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_1) /* U60CK Div /1 */
-#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */
-#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */
-#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */
+#define BSP_CFG_XTAL_HZ         (24000000)                         /* XTAL 24000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY  (2)                                /* HOCO 20MHz */
+#define BSP_CFG_PLL_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_PLL_DIV         (BSP_CLOCKS_PLL_DIV_3)             /* PLL Div /3 */
+
+#ifdef TRACE_ETM
+// Due to ozone fixed trace clock div = 1, PLL is limited around 100Mhz. This use 128 Mhz
+#define BSP_CFG_PLL_MUL         (BSP_CLOCKS_PLL_MUL(16U,0U))       /* PLL Mul x16.0 */
+#else
+#define BSP_CFG_PLL_MUL         (BSP_CLOCKS_PLL_MUL(25U,0U))       /* PLL Mul x25.0 */
+#endif
+
+#define BSP_CFG_PLL2_SOURCE     (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
+#define BSP_CFG_PLL2_DIV        (BSP_CLOCKS_PLL_DIV_2)             /* PLL2 Div /2 */
+#define BSP_CFG_PLL2_MUL        (BSP_CLOCKS_PLL_MUL(20U,0U))       /* PLL2 Mul x20.0 */
+#define BSP_CFG_CLOCK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL)      /* Clock Src: PLL */
+#define BSP_CFG_CLKOUT_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CLKOUT Disabled */
+#define BSP_CFG_UCK_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* UCLK Src: PLL2 */
+#define BSP_CFG_U60CK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* U60CK Src: PLL2 */
+#define BSP_CFG_OCTA_SOURCE     (BSP_CLOCKS_CLOCK_DISABLED)        /* OCTASPICLK Disabled */
+#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED)        /* CANFDCLK Disabled */
+#define BSP_CFG_CECCLK_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CECCLK Disabled */
+#define BSP_CFG_ICLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* ICLK Div /1 */
+#define BSP_CFG_PCLKA_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKD Div /2 */
+#define BSP_CFG_BCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* BCLK Div /2 */
+#define BSP_CFG_BCLK_OUTPUT     (2)                                /* EBCLK Div /2 */
+#define BSP_CFG_FCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_DIV      (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_DIV         (BSP_CLOCKS_USB_CLOCK_DIV_5)       /* UCLK Div /5 */
+#define BSP_CFG_U60CK_DIV       (BSP_CLOCKS_USB60_CLOCK_DIV_4)     /* U60CK Div /4 */
+#define BSP_CFG_OCTA_DIV        (BSP_CLOCKS_OCTA_CLOCK_DIV_1)      /* OCTASPICLK Div /1 */
+#define BSP_CFG_CANFDCLK_DIV    (BSP_CLOCKS_CANFD_CLOCK_DIV_1)     /* CANFDCLK Div /1 */
+#define BSP_CFG_CECCLK_DIV      (BSP_CLOCKS_CEC_CLOCK_DIV_1)       /* CECCLK Div /1 */
+
+
 #endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
index fa55d40b2..8a1262138 100644
--- a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
+++ b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
@@ -33,3 +33,73 @@ void BeforeTargetConnect (void) {
   // Trace pin init is done by J-Link script file as J-Link script files are IDE independent
   //
 }
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr != 0xFFFFFFFF) {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+  } else {
+    Util.Log("Project file error: failed to get program base");
+  }
+
+  PC = Elf.GetEntryPointPC();
+
+  if (PC != 0xFFFFFFFF) {
+    Target.SetReg("PC", PC);
+  } else if (VectorTableAddr != 0xFFFFFFFF) {
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr != 0xFFFFFFFF) {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+  } else {
+    Util.Log("Project file error: failed to get program base");
+  }
+
+  PC = Elf.GetEntryPointPC();
+
+  if (PC != 0xFFFFFFFF) {
+    Target.SetReg("PC", PC);
+  } else if (VectorTableAddr != 0xFFFFFFFF) {
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c
index 08823dd52..769678954 100644
--- a/hw/bsp/ra/family.c
+++ b/hw/bsp/ra/family.c
@@ -36,15 +36,14 @@
 #endif
 
 #include "bsp_api.h"
+#include "r_ioport.h"
+#include "r_ioport_api.h"
+#include "renesas.h"
 
 #ifdef __GNUC__
 #pragma GCC diagnostic pop
 #endif
 
-#include "r_ioport.h"
-#include "r_ioport_api.h"
-#include "renesas.h"
-
 #include "bsp/board.h"
 #include "board.h"
 
@@ -86,15 +85,17 @@ void board_init(void)
   R_IOPORT_Open(&port_ctrl, &family_pin_cfg);
 
 #ifdef TRACE_ETM
-  // Enable trace clock with div 1 (100 Mhz)
-  R_SYSTEM->TRCKCR = R_SYSTEM_TRCKCR_TRCKEN_Msk;
+  // Enable trace clock (max 100Mhz) = PLL / div
+  // Somehow ozone/jtrace always fixed trace div to 1 therefore for ETM tracing working reliably
+  // PLL is limited around 100Mhz
+  R_SYSTEM->TRCKCR = R_SYSTEM_TRCKCR_TRCKEN_Msk | 0x01;
 #endif
 
   // Enable USB module
   R_MSTP->MSTPCRB &= ~(1U << 11U); // FS
 
 #ifdef R_USB_HS0_BASE
-  R_MSTP->MSTPCRB &= ~(1U << 12U); // HS
+//  R_MSTP->MSTPCRB &= ~(1U << 12U); // HS
 #endif
 
 #if CFG_TUSB_OS == OPT_OS_FREERTOS
diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake
index 828559e5e..f4e978230 100644
--- a/hw/bsp/ra/family.cmake
+++ b/hw/bsp/ra/family.cmake
@@ -37,14 +37,14 @@ function(add_board_target BOARD_TARGET)
       ${FSP_RA}/src/bsp/mcu/all/bsp_security.c
       ${FSP_RA}/src/r_ioport/r_ioport.c
       )
-    target_compile_definitions(${BOARD_TARGET} PUBLIC
-      _RA_TZ_NONSECURE
-      )
+    # ETM Trace option
+    if (TRACE_ETM STREQUAL "1")
+      target_compile_definitions(${BOARD_TARGET} PUBLIC TRACE_ETM)
+    endif ()
 
     target_compile_options(${BOARD_TARGET} PUBLIC
       -ffreestanding
       )
-
     target_include_directories(${BOARD_TARGET} PUBLIC
       ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
       ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
diff --git a/tools/get_deps.py b/tools/get_deps.py
index fa47a8067..21ad539c4 100644
--- a/tools/get_deps.py
+++ b/tools/get_deps.py
@@ -57,7 +57,7 @@ deps_optional = {
                                          '58879cfa0eca5725d8db6443ec17f8896a321042',
                                          'rp2040'],
     'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git',
-                           '9860fae1f180340a0e3c097dc6e91323cf83b926',
+                           'd52e5a6a59b7c638da860c2bb309b6e78e752ff8',
                            'ra'],
     'hw/mcu/renesas/rx': ['https://github.com/kkitayam/rx_device.git',
                           '706b4e0cf485605c32351e2f90f5698267996023',