diff options
| author | Ha Thach <[email protected]> | 2024-11-14 10:25:52 +0700 |
|---|---|---|
| committer | GitHub <[email protected]> | 2024-11-14 10:25:52 +0700 |
| commit | 0af07f1cffa025da8a2b153280e07760a90a96d8 (patch) | |
| tree | 193a894c1f8ca30011cf76b2aef629756ab14814 | |
| parent | b648a38ae84181757d4c8bdbd3f92001448ac805 (diff) | |
| parent | 6f11f99f989660384611d846fc6de7ccdf008b0e (diff) | |
Merge branch 'master' into warning
190 files changed, 4931 insertions, 1890 deletions
diff --git a/.gitignore b/.gitignore index f2150a26f..309d7466a 100644 --- a/.gitignore +++ b/.gitignore @@ -32,3 +32,5 @@ __pycache__ cmake-build-* sdkconfig .PVS-Studio +.vscode/ +build/ diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 05dceda5a..1210c49e7 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -54,7 +54,14 @@ </envs> </ADDITIONAL_GENERATION_ENVIRONMENT> </configuration> - <configuration PROFILE_NAME="espressif_p4_function_ev" ENABLED="false" TOOLCHAIN_NAME="ESP-IDF" GENERATION_OPTIONS="-DBOARD=espressif_p4_function_ev"> + <configuration PROFILE_NAME="espressif_p4_function_ev" ENABLED="false" TOOLCHAIN_NAME="ESP-IDF" GENERATION_OPTIONS="-DBOARD=espressif_p4_function_ev -DLOG=1"> + <ADDITIONAL_GENERATION_ENVIRONMENT> + <envs> + <env name="ESPBAUD" value="1500000" /> + </envs> + </ADDITIONAL_GENERATION_ENVIRONMENT> + </configuration> + <configuration PROFILE_NAME="espressif_p4_function_ev-CFG_TUD_DWC2_DMA" ENABLED="false" GENERATION_DIR="cmake-build-espressif_p4_function_ev-CFG_TUD_DWC2_DMA" TOOLCHAIN_NAME="ESP-IDF" GENERATION_OPTIONS="-DBOARD=espressif_p4_function_ev -DLOG=1 -DCFLAGS_CLI="-DCFG_TUD_DWC2_DMA=1""> <ADDITIONAL_GENERATION_ENVIRONMENT> <envs> <env name="ESPBAUD" value="1500000" /> @@ -92,13 +99,17 @@ <configuration PROFILE_NAME="stm32f303disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f303disco -DLOG=0 -DLOGGER=RTT" /> <configuration PROFILE_NAME="stm32f411disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f411disco -DLOG=1 -DLOGGER=RTT" /> <configuration PROFILE_NAME="stm32f412disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f412disco -DLOG=1 -DLOGGER=RTT" /> + <configuration PROFILE_NAME="stm32f723disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f723disco -DLOG=0" /> + <configuration PROFILE_NAME="stm32f723disco-CFG_TUD_DWC2_DMA" ENABLED="false" GENERATION_DIR="cmake-build-stm32f723disco-CFG_TUD_DWC2_DMA" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f723disco -DLOG=1 -DLOGGER=RTT -DCFLAGS_CLI="-DCFG_TUD_DWC2_DMA=1"" /> + <configuration PROFILE_NAME="stm32f723disco_device1" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f723disco -DLOG=0 -DRHPORT_DEVICE=1" /> <configuration PROFILE_NAME="stm32f769disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f769disco -DLOG=1 -DLOGGER=RTT" /> <configuration PROFILE_NAME="stm32g0b1nucleo" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32g0b1nucleo" /> <configuration PROFILE_NAME="stm32g474nucleo" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32g474nucleo" /> <configuration PROFILE_NAME="b_g474e_dpow1" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=b_g474e_dpow1 -DLOG=1 -DLOGGER=RTT" /> <configuration PROFILE_NAME="stm32h563nucleo" ENABLED="false" GENERATION_OPTIONS="-DBOARD=stm32h563nucleo -DLOG=1 -DLOGGER=RTT -DTRACE_ETM=1" /> <configuration PROFILE_NAME="stm32h743eval" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743eval -DLOG=1 -DLOGGER=RTT -DTRACE_ETM=1" /> - <configuration PROFILE_NAME="stm32h743eval_dma" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743eval -DLOG=1 -DLOGGER=RTT -DTRACE_ETM=1 -DCFLAGS_CLI="-DCFG_TUD_DWC2_DMA=1"" /> + <configuration PROFILE_NAME="stm32h743eval-CFG_TUD_DWC2_DMA" ENABLED="false" GENERATION_DIR="cmake-build-stm32h743eval-CFG_TUD_DWC2_DMA" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743eval -DLOG=1 -DLOGGER=RTT -DTRACE_ETM=1 -DCFLAGS_CLI="-DCFG_TUD_DWC2_DMA=1"" /> + <configuration PROFILE_NAME="stm32h743eval_host1" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743eval -DRHPORT_HOST=1 -DLOG=1 -DLOGGER=RTT -DTRACE_ETM=1" /> <configuration PROFILE_NAME="stm32h743nucleo" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743nucleo -DLOG=1" /> <configuration PROFILE_NAME="stm32l0538disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32l0538disco -DLOG=0 -DLOGGER=RTT" /> <configuration PROFILE_NAME="stm32l476disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32l476disco -DLOG=1 -DLOGGER=RTT" /> diff --git a/.idea/runConfigurations/k64f.xml b/.idea/runConfigurations/k64f.xml index 80ca22d40..6db0dd74e 100644 --- a/.idea/runConfigurations/k64f.xml +++ b/.idea/runConfigurations/k64f.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="k64f" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MK64FN1M0xxx12" -if swd -speed 10000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="k64f" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MK64FN1M0xxx12" -if swd -speed 10000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/kl25.xml b/.idea/runConfigurations/kl25.xml index 96c208dde..bb7e1707b 100644 --- a/.idea/runConfigurations/kl25.xml +++ b/.idea/runConfigurations/kl25.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="kl25" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MKL25Z128xxx4" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m0_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="kl25" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MKL25Z128xxx4" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/lpc1857.xml b/.idea/runConfigurations/lpc1857.xml index a4764b9d6..ef8178e08 100644 --- a/.idea/runConfigurations/lpc1857.xml +++ b/.idea/runConfigurations/lpc1857.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="lpc1857" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "lpc1857" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="lpc1857" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "lpc1857" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="device_info" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="device_info"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/lpc4088.xml b/.idea/runConfigurations/lpc4088.xml index 9da975ef3..6c6886f30 100644 --- a/.idea/runConfigurations/lpc4088.xml +++ b/.idea/runConfigurations/lpc4088.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="lpc4088" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "lpc4088" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="lpc4088" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "lpc4088" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/lpc54628.xml b/.idea/runConfigurations/lpc54628.xml index 0c3877e94..4b871d543 100644 --- a/.idea/runConfigurations/lpc54628.xml +++ b/.idea/runConfigurations/lpc54628.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="lpc54628" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "LPC54628J512" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="lpc54628" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "LPC54628J512" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/lpc55s69.xml b/.idea/runConfigurations/lpc55s69.xml index 2fa127d33..7ab9fac66 100644 --- a/.idea/runConfigurations/lpc55s69.xml +++ b/.idea/runConfigurations/lpc55s69.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="lpc55s69" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "lpc55s69" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="lpc55s69" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "lpc55s69" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/mcx947.xml b/.idea/runConfigurations/mcx947.xml index 12180a996..2a9805145 100644 --- a/.idea/runConfigurations/mcx947.xml +++ b/.idea/runConfigurations/mcx947.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="mcx947" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MCXN947_M33_0" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $ProjectFileDir$/hw/bsp/mcx/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="mcx947" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MCXN947_M33_0" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $ProjectFileDir$/hw/bsp/mcx/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/nrf52840.xml b/.idea/runConfigurations/nrf52840.xml index 8e48a2b97..5a4f4837b 100644 --- a/.idea/runConfigurations/nrf52840.xml +++ b/.idea/runConfigurations/nrf52840.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="nrf52840" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nrf" PROGRAM_PARAMS="-select usb=752001685 -device "nrf52840_xxaa" -if swd -speed 8000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="nrf52840" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nrf" PROGRAM_PARAMS="-select usb=752001685 -device "nrf52840_xxaa" -if swd -speed 8000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/nrf5340.xml b/.idea/runConfigurations/nrf5340.xml index 646f2d38c..bf1cb2938 100644 --- a/.idea/runConfigurations/nrf5340.xml +++ b/.idea/runConfigurations/nrf5340.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="nrf5340" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nrf" PROGRAM_PARAMS="-select usb=752001685 -device "nrf5340_xxaa_app" -if swd -speed 16000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="nrf5340" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nrf" PROGRAM_PARAMS="-select usb=752001685 -device "nrf5340_xxaa_app" -if swd -speed 16000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/ra2a1.xml b/.idea/runConfigurations/ra2a1.xml index cb87de5bd..d50b3d729 100644 --- a/.idea/runConfigurations/ra2a1.xml +++ b/.idea/runConfigurations/ra2a1.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="ra2a1" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA2A1AB" -if swd -speed 20000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="ra2a1" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA2A1AB" -if swd -speed 20000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/ra4m1.xml b/.idea/runConfigurations/ra4m1.xml index 72bc63d9b..0cccb60d2 100644 --- a/.idea/runConfigurations/ra4m1.xml +++ b/.idea/runConfigurations/ra4m1.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="ra4m1" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA4M1AB" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $PROJECT_DIR$/hw/bsp/ra/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="ra4m1" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA4M1AB" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $PROJECT_DIR$/hw/bsp/ra/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/ra6m1.xml b/.idea/runConfigurations/ra6m1.xml index ca8c7245a..5efd47753 100644 --- a/.idea/runConfigurations/ra6m1.xml +++ b/.idea/runConfigurations/ra6m1.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="ra6m1" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA6M1AD" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $PROJECT_DIR$/hw/bsp/ra/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="ra6m1" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA6M1AD" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $PROJECT_DIR$/hw/bsp/ra/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/ra6m5.xml b/.idea/runConfigurations/ra6m5.xml index ecbdb21b7..713fc68cc 100644 --- a/.idea/runConfigurations/ra6m5.xml +++ b/.idea/runConfigurations/ra6m5.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="ra6m5" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA6M5BH" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $PROJECT_DIR$/hw/bsp/ra/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="ra6m5" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA6M5BH" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $PROJECT_DIR$/hw/bsp/ra/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/rt1010.xml b/.idea/runConfigurations/rt1010.xml index f415c0676..c3582512c 100644 --- a/.idea/runConfigurations/rt1010.xml +++ b/.idea/runConfigurations/rt1010.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="rt1010" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MIMXRT1011xxx5A" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $ProjectFileDir$/hw/bsp/imxrt/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="rt1010" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MIMXRT1011xxx5A" -if swd -speed 50000 -port 25321 -nogui -singlerun -jlinkscriptfile $ProjectFileDir$/hw/bsp/imxrt/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/rt1060.xml b/.idea/runConfigurations/rt1060.xml index cc75aa62c..649fe6dac 100644 --- a/.idea/runConfigurations/rt1060.xml +++ b/.idea/runConfigurations/rt1060.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="rt1060" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MIMXRT1062xxx5A" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="rt1060" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="nxp" PROGRAM_PARAMS="-device "MIMXRT1062xxx5A" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="device_info" TARGET_NAME="device_info" version="1" RUN_TARGET_PROJECT_NAME="device_info" RUN_TARGET_NAME="device_info"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/samd21g18.xml b/.idea/runConfigurations/samd21g18.xml index f8aa6009d..2ea822493 100644 --- a/.idea/runConfigurations/samd21g18.xml +++ b/.idea/runConfigurations/samd21g18.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="samd21g18" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="microchip" PROGRAM_PARAMS="-device "ATSAMD21G18" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m0_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="samd21g18" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="microchip" PROGRAM_PARAMS="-device "ATSAMD21G18" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/samd51j19.xml b/.idea/runConfigurations/samd51j19.xml index 694ea7dfd..b6cbe253a 100644 --- a/.idea/runConfigurations/samd51j19.xml +++ b/.idea/runConfigurations/samd51j19.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="samd51j19" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="microchip" PROGRAM_PARAMS="-device "ATSAMD51J19A" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="samd51j19" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="microchip" PROGRAM_PARAMS="-device "ATSAMD51J19A" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/.idea/runConfigurations/stm32g474.xml b/.idea/runConfigurations/stm32g474.xml index c3b5c9953..600b1e555 100644 --- a/.idea/runConfigurations/stm32g474.xml +++ b/.idea/runConfigurations/stm32g474.xml @@ -1,5 +1,5 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="stm32g474" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-device "stm32g474re" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="stm32f769disco" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <configuration default="false" name="stm32g474" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-device "stm32g474re" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> diff --git a/.idea/runConfigurations/stm32h563.xml b/.idea/runConfigurations/stm32h563.xml index 7a72e53cb..9c0ffc2ec 100644 --- a/.idea/runConfigurations/stm32h563.xml +++ b/.idea/runConfigurations/stm32h563.xml @@ -1,5 +1,5 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="stm32h563" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-device "stm32h563zi" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="stm32h743eval" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <configuration default="false" name="stm32h563" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-device "stm32h563zi" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> diff --git a/.idea/runConfigurations/stm32h743.xml b/.idea/runConfigurations/stm32h743.xml index 618f136b3..1565e92cd 100644 --- a/.idea/runConfigurations/stm32h743.xml +++ b/.idea/runConfigurations/stm32h743.xml @@ -1,5 +1,5 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="stm32h743" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-device "stm32h743xi" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="stm32h743eval" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <configuration default="false" name="stm32h743" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-device "stm32h743xi" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc_hid" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc_hid"> <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> diff --git a/.idea/runConfigurations/stm32u5a5.xml b/.idea/runConfigurations/stm32u5a5.xml index a53a65308..92a1293be 100644 --- a/.idea/runConfigurations/stm32u5a5.xml +++ b/.idea/runConfigurations/stm32u5a5.xml @@ -1,5 +1,5 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="stm32u5a5" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-device "stm32u5a5zj" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="stm32h743eval" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <configuration default="false" name="stm32u5a5" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-device "stm32u5a5zj" -if swd -speed 50000 -port 25321 -nogui -singlerun" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> diff --git a/.idea/runConfigurations/uno_r4.xml b/.idea/runConfigurations/uno_r4.xml index 98bf91812..c69e2939c 100644 --- a/.idea/runConfigurations/uno_r4.xml +++ b/.idea/runConfigurations/uno_r4.xml @@ -1,7 +1,8 @@ <component name="ProjectRunConfigurationManager"> - <configuration default="false" name="uno_r4" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA4M1AB" -if swd -speed 20000 -port 25321 -nogui -singlerun -jlinkscriptfile $PROJECT_DIR$/hw/bsp/ra/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="metro_m4_express" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> - <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD"> + <configuration default="false" name="uno_r4" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="renesas" PROGRAM_PARAMS="-device "R7FA4M1AB" -if swd -speed 20000 -port 25321 -nogui -singlerun -jlinkscriptfile $PROJECT_DIR$/hw/bsp/ra/debug.jlinkscript" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc"> + <custom-gdb-server version="1" gdb-connect="tcp::25321" executable="/usr/bin/JLinkGDBServer" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD" connection-mode="REMOTE" gdbserver-enable="false" console-enabled="false" console-port="0"> <debugger kind="GDB" isBundled="true" /> + <extra-debugger-params debugger-working-dir="" debugger-env-pass-parent="true" custom-script="" /> </custom-gdb-server> <method v="2"> <option name="CLION.COMPOUND.BUILD" enabled="true" /> diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index b871490dc..da2431415 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -21,11 +21,13 @@ Supported MCUs +--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ | Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | +--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Espressif | ESP32 S2, S3 | ✔ | | ✖ | dwc2 or esp32sx | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Espressif | S2, S3 | ✔ | ✔ | ✖ | dwc2 or esp32sx | | +| ESP32 +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | P4 | ✔ | ✔ | ✔ | dwc2 | | ++--------------+----+------------------------+--------+------+-----------+------------------------+-------------------+ | GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Infineon | XMC4500 | ✔ | | ✖ | dwc2 | | +| Infineon | XMC4500 | ✔ | ✔ | ✖ | dwc2 | | +--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ | MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | | | +-----------------------+--------+------+-----------+------------------------+-------------------+ @@ -89,31 +91,31 @@ Supported MCUs | +----+------------------------+--------+------+-----------+------------------------+-------------------+ | | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | | | | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 105, 107 | ✔ | | ✖ | dwc2 | | +| | | 105, 107 | ✔ | ✔ | ✖ | dwc2 | | | +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | F2, F4, F7, H7 | ✔ | | ✔ | dwc2 | | +| | F2, F4, F7, H7 | ✔ | ✔ | ✔ | dwc2 | | | +-----------------------------+--------+------+-----------+------------------------+-------------------+ | | F3 | ✔ | ✖ | ✖ | stm32_fsdev | | | +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | G0, H5 | ✔ | | ✖ | stm32_fsdev | | +| | G0, H5 | ✔ | ✖ | ✖ | stm32_fsdev | | | +-----------------------------+--------+------+-----------+------------------------+-------------------+ | | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | | +-----------------------------+--------+------+-----------+------------------------+-------------------+ | | L0, L1 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| +----+------------------------+--------+------+-----------+------------------------+-------------------+ | | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | | | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 4x5, 4x6 | ✔ | | ✖ | dwc2 | | +| | | 4x5, 4x6 | ✔ | ✔ | ✖ | dwc2 | | | +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | L4+ | ✔ | | ✖ | dwc2 | | +| | L4+ | ✔ | ✔ | ✖ | dwc2 | | | +-----------------------------+--------+------+-----------+------------------------+-------------------+ | | L5 | ✔ | ✖ | ✖ | stm32_fsdev | | | +----+------------------------+--------+------+-----------+------------------------+-------------------+ | | U5 | 535, 545 | ✔ | | ✖ | stm32_fsdev | | | | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 575, 585 | ✔ | | ✖ | dwc2 | | +| | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | | | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 59x,5Ax,5Fx,5Gx | ✔ | | ✔ | dwc2 | | +| | | 59x,5Ax,5Fx,5Gx | ✔ | ✔ | ✔ | dwc2 | | | +----+------------------------+--------+------+-----------+------------------------+-------------------+ | | WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | +--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index 638440795..26a808a21 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -28,6 +28,7 @@ family_add_subdirectory(midi_test) family_add_subdirectory(msc_dual_lun) family_add_subdirectory(net_lwip_webserver) family_add_subdirectory(uac2_headset) +family_add_subdirectory(uac2_speaker_fb) family_add_subdirectory(usbtmc) family_add_subdirectory(video_capture) family_add_subdirectory(video_capture_2ch) diff --git a/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 869500ad2..902a54f08 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -48,7 +48,7 @@ // Include MCU header #include "bsp/board_mcu.h" -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +#if TUSB_MCU_VENDOR_ESPRESSIF #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" #endif diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index 2ac7516cd..c9de4029a 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -39,7 +39,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -186,14 +186,14 @@ int main(void) #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 88f20278b..5cd93b0d6 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 869500ad2..902a54f08 100644 --- a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -48,7 +48,7 @@ // Include MCU header #include "bsp/board_mcu.h" -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +#if TUSB_MCU_VENDOR_ESPRESSIF #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" #endif diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index 4e2264b5d..c5143c3fc 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -38,7 +38,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -133,16 +133,15 @@ int main(void) #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) -void app_main(void) -{ +#if TUSB_MCU_VENDOR_ESPRESSIF +void app_main(void) { main(); } #endif diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index 8b376a4c3..61c5cbb96 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 91799eb89..2269d45f1 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -67,7 +67,7 @@ int main(void) { } } -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 89c27d1c0..8ac3bc8de 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 9415f8c68..c2f9cb095 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,5 +1,5 @@ cmake_minimum_required(VERSION 3.17) -set_property(GLOBAL PROPERTY USE_FOLDERS ON) +#set_property(GLOBAL PROPERTY USE_FOLDERS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 869500ad2..902a54f08 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -48,7 +48,7 @@ // Include MCU header #include "bsp/board_mcu.h" -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +#if TUSB_MCU_VENDOR_ESPRESSIF #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" #endif diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index f70267e33..a05ceff58 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -111,14 +111,14 @@ int main(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUP_MCU_ESPRESSIF +#if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index e743c9148..c3f2f7fb5 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 869500ad2..902a54f08 100644 --- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -48,7 +48,7 @@ // Include MCU header #include "bsp/board_mcu.h" -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +#if TUSB_MCU_VENDOR_ESPRESSIF #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" #endif diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ae091571e..30c0331ef 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" #include "usb_descriptors.h" -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -113,14 +113,14 @@ int main(void) xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUP_MCU_ESPRESSIF +#if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 0689e0f23..6ec38b95c 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/uac2_speaker_fb/CMakeLists.txt b/examples/device/uac2_speaker_fb/CMakeLists.txt index e92a57148..f40ca8716 100644 --- a/examples/device/uac2_speaker_fb/CMakeLists.txt +++ b/examples/device/uac2_speaker_fb/CMakeLists.txt @@ -21,6 +21,7 @@ add_executable(${PROJECT}) target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/quirk_os_guessing.c ) # Example include diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 53bbec9b6..ea5a2941d 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -418,7 +418,7 @@ void audio_task(void) if ( start_ms == curr_ms ) return; // not enough time start_ms = curr_ms; - uint16_t length = current_sample_rate/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX; + uint16_t length = (uint16_t) (current_sample_rate/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX); if (current_sample_rate == 44100 && (curr_ms % 10 == 0)) { @@ -469,7 +469,7 @@ void audio_debug_task(void) debug_info.alt_settings = current_alt_settings; debug_info.fifo_size = CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ; debug_info.fifo_count = fifo_count; - debug_info.fifo_count_avg = fifo_count_avg >> 16; + debug_info.fifo_count_avg = (uint16_t) (fifo_count_avg >> 16); for (int i = 0; i < CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1; i++) { debug_info.mute[i] = mute[i]; diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index aeeeb8930..8bb924c61 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -292,7 +292,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -352,7 +352,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUP_MCU_ESPRESSIF + #if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 3a6daa3d3..6dbd6f2a5 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index dd6983766..245e7abb8 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -300,7 +300,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -360,7 +360,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUP_MCU_ESPRESSIF + #if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index 43c7dfc90..91775a327 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index a6557c2d0..54e36e3d3 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -28,13 +28,15 @@ target_include_directories(${PROJECT} PUBLIC family_configure_dual_usb_example(${PROJECT} noos) # due to warnings from Pico-PIO-USB -target_compile_options(${PROJECT} PUBLIC - -Wno-error=shadow - -Wno-error=cast-align - -Wno-error=cast-qual - -Wno-error=redundant-decls - -Wno-error=sign-conversion - -Wno-error=conversion - -Wno-error=sign-compare - -Wno-error=unused-function - ) +if (FAMILY STREQUAL rp2040) + target_compile_options(${PROJECT} PUBLIC + -Wno-error=shadow + -Wno-error=cast-align + -Wno-error=cast-qual + -Wno-error=redundant-decls + -Wno-error=sign-conversion + -Wno-error=conversion + -Wno-error=sign-compare + -Wno-error=unused-function + ) +endif () diff --git a/examples/dual/host_hid_to_device_cdc/Makefile b/examples/dual/host_hid_to_device_cdc/Makefile index 2c2168f5d..474ae9814 100644 --- a/examples/dual/host_hid_to_device_cdc/Makefile +++ b/examples/dual/host_hid_to_device_cdc/Makefile @@ -8,7 +8,7 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference +CFLAGS_GCC += -Wno-error=cast-align -Wno-error=null-dereference SRC_C += \ src/class/hid/hid_host.c \ diff --git a/examples/dual/host_hid_to_device_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt index cfc87eb4e..3f40b4e7c 100644 --- a/examples/dual/host_hid_to_device_cdc/only.txt +++ b/examples/dual/host_hid_to_device_cdc/only.txt @@ -4,3 +4,6 @@ board:mcb1800 mcu:RP2040 mcu:ra6m5 mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/dual/host_info_to_device_cdc/CMakeLists.txt b/examples/dual/host_info_to_device_cdc/CMakeLists.txt index a6557c2d0..54e36e3d3 100644 --- a/examples/dual/host_info_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_info_to_device_cdc/CMakeLists.txt @@ -28,13 +28,15 @@ target_include_directories(${PROJECT} PUBLIC family_configure_dual_usb_example(${PROJECT} noos) # due to warnings from Pico-PIO-USB -target_compile_options(${PROJECT} PUBLIC - -Wno-error=shadow - -Wno-error=cast-align - -Wno-error=cast-qual - -Wno-error=redundant-decls - -Wno-error=sign-conversion - -Wno-error=conversion - -Wno-error=sign-compare - -Wno-error=unused-function - ) +if (FAMILY STREQUAL rp2040) + target_compile_options(${PROJECT} PUBLIC + -Wno-error=shadow + -Wno-error=cast-align + -Wno-error=cast-qual + -Wno-error=redundant-decls + -Wno-error=sign-conversion + -Wno-error=conversion + -Wno-error=sign-compare + -Wno-error=unused-function + ) +endif () diff --git a/examples/dual/host_info_to_device_cdc/Makefile b/examples/dual/host_info_to_device_cdc/Makefile index 0ede79c17..083c9169a 100644 --- a/examples/dual/host_info_to_device_cdc/Makefile +++ b/examples/dual/host_info_to_device_cdc/Makefile @@ -8,7 +8,7 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference +CFLAGS_GCC += -Wno-error=cast-align -Wno-error=null-dereference SRC_C += \ src/host/hub.c \ diff --git a/examples/dual/host_info_to_device_cdc/only.txt b/examples/dual/host_info_to_device_cdc/only.txt index cfc87eb4e..3f40b4e7c 100644 --- a/examples/dual/host_info_to_device_cdc/only.txt +++ b/examples/dual/host_info_to_device_cdc/only.txt @@ -4,3 +4,6 @@ board:mcb1800 mcu:RP2040 mcu:ra6m5 mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index 6bb3a2072..3f98ec89f 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -130,13 +130,12 @@ void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t cons //--------------------------------------------------------------------+ // look up new key in previous keys -static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) -{ - for(uint8_t i=0; i<6; i++) - { - if (report->keycode[i] == keycode) return true; +static inline bool find_key_in_report(hid_keyboard_report_t const* report, uint8_t keycode) { + for (uint8_t i = 0; i < 6; i++) { + if (report->keycode[i] == keycode) { + return true; + } } - return false; } diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 1e0e60075..e3ae25260 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -1,3 +1,4 @@ +mcu:ESP32P4 mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX @@ -9,3 +10,6 @@ mcu:MIMXRT11XX mcu:MSP432E4 mcu:RX65X mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index bd754518d..6a886adec 100644 --- a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -48,7 +48,7 @@ // Include MCU header #include "bsp/board_mcu.h" -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +#if TUSB_MCU_VENDOR_ESPRESSIF #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index f3495ab28..dfe1418f6 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,7 +27,7 @@ #include "tusb.h" #include "bsp/board_api.h" -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 7fb84a40f..fe050d334 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -107,14 +107,14 @@ int main(void) { xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUP_MCU_ESPRESSIF +#if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 0aab2cd2f..02de4197b 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index b3f4468bb..b6f87f423 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,3 +1,6 @@ +mcu:ESP32S2 +mcu:ESP32S3 +mcu:ESP32P4 mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X @@ -12,3 +15,6 @@ mcu:MSP432E4 mcu:RP2040 mcu:RX65X mcu:RAXXX +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/device_info/src/CMakeLists.txt b/examples/host/device_info/src/CMakeLists.txt new file mode 100644 index 000000000..1908a32c3 --- /dev/null +++ b/examples/host/device_info/src/CMakeLists.txt @@ -0,0 +1,4 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS "main.c" + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 0ff4f32e9..70304e449 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -24,7 +24,7 @@ */ /* Host example will get device descriptors of attached devices and print it out via uart/rtt (logger) as follows: - * Device 1: ID 046d:c52f + * Device 1: ID 046d:c52f SN 11223344 Device Descriptor: bLength 18 bDescriptorType 1 @@ -56,15 +56,24 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -void led_blinking_task(void); -static void print_utf16(uint16_t* temp_buf, size_t buf_len); +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; -/*------------- MAIN -------------*/ -int main(void) { - board_init(); +void led_blinking_task(void* param); +static void print_utf16(uint16_t* temp_buf, size_t buf_len); - printf("TinyUSB Device Info Example\r\n"); +#if CFG_TUSB_OS == OPT_OS_FREERTOS +void init_freertos_task(void); +#endif +//-------------------------------------------------------------------- +// Main +//-------------------------------------------------------------------- +void init_tinyusb(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { .role = TUSB_ROLE_HOST, @@ -75,20 +84,30 @@ int main(void) { if (board_init_after_tusb) { board_init_after_tusb(); } +} + +int main(void) { + board_init(); + printf("TinyUSB Device Info Example\r\n"); +#if CFG_TUSB_OS == OPT_OS_FREERTOS + init_freertos_task(); +#else + init_tinyusb(); while (1) { - // tinyusb host task - tuh_task(); - led_blinking_task(); + tuh_task(); // tinyusb host task + led_blinking_task(NULL); } - return 0; +#endif } /*------------- TinyUSB Callbacks -------------*/ // Invoked when device is mounted (configured) void tuh_mount_cb(uint8_t daddr) { + blink_interval_ms = BLINK_MOUNTED; + // Get Device Descriptor tusb_desc_device_t desc_device; uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc_device, 18); @@ -97,9 +116,20 @@ void tuh_mount_cb(uint8_t daddr) { return; } + uint16_t serial[64]; uint16_t buf[256]; - printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct); + printf("Device %u: ID %04x:%04x SN ", daddr, desc_device.idVendor, desc_device.idProduct); + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); + if (XFER_RESULT_SUCCESS != xfer_result) { + serial[0] = 'n'; + serial[1] = '/'; + serial[2] = 'a'; + serial[3] = 0; + } + print_utf16(serial, TU_ARRAY_SIZE(serial)); + printf("\r\n"); + printf("Device Descriptor:\r\n"); printf(" bLength %u\r\n", desc_device.bLength); printf(" bDescriptorType %u\r\n", desc_device.bDescriptorType); @@ -129,38 +159,19 @@ void tuh_mount_cb(uint8_t daddr) { printf("\r\n"); printf(" iSerialNumber %u ", desc_device.iSerialNumber); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16(buf, TU_ARRAY_SIZE(buf)); - } + printf((char*)serial); // serial is already to UTF-8 printf("\r\n"); printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); } -/// Invoked when device is unmounted (bus reset/unplugged) +// Invoked when device is unmounted (bus reset/unplugged) void tuh_umount_cb(uint8_t daddr) { + blink_interval_ms = BLINK_NOT_MOUNTED; printf("Device removed, address = %d\r\n", daddr); } //--------------------------------------------------------------------+ -// Blinking Task -//--------------------------------------------------------------------+ -void led_blinking_task(void) { - const uint32_t interval_ms = 1000; - static uint32_t start_ms = 0; - - static bool led_state = false; - - // Blink every interval ms - if (board_millis() - start_ms < interval_ms) return; // not enough time - start_ms += interval_ms; - - board_led_write(led_state); - led_state = 1 - led_state; // toggle -} - -//--------------------------------------------------------------------+ // String Descriptor Helper //--------------------------------------------------------------------+ @@ -212,3 +223,81 @@ static void print_utf16(uint16_t* temp_buf, size_t buf_len) { printf("%s", (char*) temp_buf); } + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void* param) { + (void) param; + static uint32_t start_ms = 0; + static bool led_state = false; + + while (1) { +#if CFG_TUSB_OS == OPT_OS_FREERTOS + vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); +#else + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } +#endif + + start_ms += blink_interval_ms; + board_led_write(led_state); + led_state = 1 - led_state; // toggle + } +} + +//--------------------------------------------------------------------+ +// FreeRTOS +//--------------------------------------------------------------------+ +#if CFG_TUSB_OS == OPT_OS_FREERTOS + +#define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE + +#if TUSB_MCU_VENDOR_ESPRESSIF + #define USB_STACK_SIZE 4096 +#else + // Increase stack size when debug log is enabled + #define USB_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) +#endif + + +// static task +#if configSUPPORT_STATIC_ALLOCATION +StackType_t blinky_stack[BLINKY_STACK_SIZE]; +StaticTask_t blinky_taskdef; + +StackType_t usb_stack[USB_STACK_SIZE]; +StaticTask_t usb_taskdef; +#endif + +#if TUSB_MCU_VENDOR_ESPRESSIF +void app_main(void) { + main(); +} +#endif + +void usb_host_task(void *param) { + (void) param; + init_tinyusb(); + while (1) { + tuh_task(); + } +} + +void init_freertos_task(void) { +#if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); + xTaskCreateStatic(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_stack, &usb_taskdef); +#else + xTaskCreate(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, NULL); + xTaskCreate(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); +#endif + + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#if !TUSB_MCU_VENDOR_ESPRESSIF + vTaskStartScheduler(); +#endif +} + +#endif diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index 2e9731eaf..5190b5b1f 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -39,6 +39,11 @@ #error CFG_TUSB_MCU must be defined #endif +// Espressif IDF requires "freertos/" prefix in include path +#if TUSB_MCU_VENDOR_ESPRESSIF +#define CFG_TUSB_OS_INC_PATH freertos/ +#endif + #ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE #endif diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/typec/power_delivery/src/main.c b/examples/typec/power_delivery/src/main.c index a8214f34e..068dbbeb1 100644 --- a/examples/typec/power_delivery/src/main.c +++ b/examples/typec/power_delivery/src/main.c @@ -71,7 +71,7 @@ int main(void) } } -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); diff --git a/hw/bsp/board.c b/hw/bsp/board.c index bb339f613..6d9488431 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -134,3 +134,8 @@ int board_getchar(void) { char c; return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); } + + +uint32_t tusb_time_millis_api(void) { + return board_millis(); +} diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index a458a3fdc..eaee1ee97 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -39,7 +39,7 @@ extern "C" { #include "tusb.h" #if CFG_TUSB_OS == OPT_OS_FREERTOS -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake index 6205d4e1b..93e7d3545 100644 --- a/hw/bsp/broadcom_32bit/family.cmake +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -97,6 +97,8 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_BCM2835 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/broadcom_32bit/family.mk b/hw/bsp/broadcom_32bit/family.mk index e15bd93f7..a282e9961 100644 --- a/hw/bsp/broadcom_32bit/family.mk +++ b/hw/bsp/broadcom_32bit/family.mk @@ -19,6 +19,8 @@ CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ $(MCU_DIR)/broadcom/gen/interrupt_handlers.c \ $(MCU_DIR)/broadcom/gpio.c \ $(MCU_DIR)/broadcom/interrupts.c \ diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake index f373dc633..d790944bc 100644 --- a/hw/bsp/broadcom_64bit/family.cmake +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -104,6 +104,8 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_BCM${BCM_VERSION} ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/broadcom_64bit/family.mk b/hw/bsp/broadcom_64bit/family.mk index 89f798f19..37d381f9f 100644 --- a/hw/bsp/broadcom_64bit/family.mk +++ b/hw/bsp/broadcom_64bit/family.mk @@ -18,6 +18,8 @@ CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ $(MCU_DIR)/broadcom/gen/interrupt_handlers.c \ $(MCU_DIR)/broadcom/gpio.c \ $(MCU_DIR)/broadcom/interrupts.c \ diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h index 9c8aa409f..0022f0d2d 100644 --- a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h +++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h @@ -36,6 +36,10 @@ #define BUTTON_PIN 0 #define BUTTON_STATE_ACTIVE 0 +// For CI hardware test, to test both device and host on the same HS port with help of +#define HIL_DEVICE_HOST_MUX_PIN 47 +#define HIL_DEVICE_STATE 1 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index a1b4334b2..729b3539d 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -105,6 +105,12 @@ void board_init(void) { usb_init(); #endif +#ifdef HIL_DEVICE_HOST_MUX_PIN + gpio_reset_pin(HIL_DEVICE_HOST_MUX_PIN); + gpio_set_direction(HIL_DEVICE_HOST_MUX_PIN, GPIO_MODE_OUTPUT); + gpio_set_level(HIL_DEVICE_HOST_MUX_PIN, CFG_TUD_ENABLED ? HIL_DEVICE_STATE : (1-HIL_DEVICE_STATE)); +#endif + #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 max3421_init(); #endif @@ -175,7 +181,15 @@ bool usb_init(void) { usb_phy_config_t phy_conf = { .controller = USB_PHY_CTRL_OTG, .target = USB_PHY_TARGET_INT, + + // maybe we can use USB_OTG_MODE_DEFAULT and switch using dwc2 driver +#if CFG_TUD_ENABLED .otg_mode = USB_OTG_MODE_DEVICE, + .otg_speed = BOARD_TUD_RHPORT ? USB_PHY_SPEED_HIGH : USB_PHY_SPEED_FULL, +#elif CFG_TUH_ENABLED + .otg_mode = USB_OTG_MODE_HOST, + .otg_speed= BOARD_TUH_RHPORT ? USB_PHY_SPEED_HIGH : USB_PHY_SPEED_FULL, +#endif }; // OTG IOs config diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index 26c7e4030..900f620fd 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -9,9 +9,10 @@ string(TOUPPER OPT_MCU_${target} tusb_mcu) list(APPEND compile_definitions CFG_TUSB_MCU=${tusb_mcu} CFG_TUSB_OS=OPT_OS_FREERTOS - # EXAMPLE port selection: port0 is fullspeed, port1 is highspeed - BOARD_TUD_RHPORT=${TUD_PORT} - BOARD_TUD_MAX_SPEED=$<IF:${TUD_PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} ) list(APPEND srcs @@ -34,6 +35,8 @@ list(APPEND srcs ${tusb_src}/class/vendor/vendor_device.c ${tusb_src}/class/video/video_device.c ${tusb_src}/portable/synopsys/dwc2/dcd_dwc2.c + ${tusb_src}/portable/synopsys/dwc2/hcd_dwc2.c + ${tusb_src}/portable/synopsys/dwc2/dwc2_common.c # host ${tusb_src}/host/usbh.c ${tusb_src}/host/hub.c @@ -57,6 +60,11 @@ if (DEFINED LOG) endif () endif() +if(DEFINED CFLAGS_CLI) + list(APPEND compile_definitions ${CFLAGS_CLI}) +endif() + + idf_component_register(SRCS ${srcs} INCLUDE_DIRS ${tusb_src} REQUIRES src diff --git a/hw/bsp/espressif/family.cmake b/hw/bsp/espressif/family.cmake index ada082c76..daa12cdb4 100644 --- a/hw/bsp/espressif/family.cmake +++ b/hw/bsp/espressif/family.cmake @@ -5,14 +5,31 @@ include("${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake") string(TOUPPER ${IDF_TARGET} FAMILY_MCUS) # Device port default to Port1 for P4 (highspeed), Port0 for others (fullspeed) -if (NOT DEFINED TUD_PORT) +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +if (NOT DEFINED RHPORT_DEVICE) if (IDF_TARGET STREQUAL "esp32p4") - set(TUD_PORT 1) + set(RHPORT_DEVICE 1) else () - set(TUD_PORT 0) + set(RHPORT_DEVICE 0) endif () endif() +if (NOT DEFINED RHPORT_HOST) + if (IDF_TARGET STREQUAL "esp32p4") + set(RHPORT_HOST 1) + else () + set(RHPORT_HOST 0) + endif () +endif() + +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + # Add example src and bsp directories set(EXTRA_COMPONENT_DIRS "src" "${CMAKE_CURRENT_LIST_DIR}/boards" "${CMAKE_CURRENT_LIST_DIR}/components") diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake index 5f4a3da8d..1441e41de 100644 --- a/hw/bsp/gd32vf103/family.cmake +++ b/hw/bsp/gd32vf103/family.cmake @@ -108,6 +108,8 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_GD32VF103 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/gd32vf103/family.mk b/hw/bsp/gd32vf103/family.mk index 48588886c..75b3efb33 100644 --- a/hw/bsp/gd32vf103/family.mk +++ b/hw/bsp/gd32vf103/family.mk @@ -31,6 +31,8 @@ CFLAGS += -Wno-error=unused-parameter SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ $(GD32VF103_SDK_DRIVER)/gd32vf103_gpio.c \ $(GD32VF103_SDK_DRIVER)/gd32vf103_rcu.c \ $(GD32VF103_SDK_DRIVER)/gd32vf103_usart.c \ diff --git a/hw/bsp/sltb009a/board.mk b/hw/bsp/sltb009a/board.mk index a04bc19d8..687761364 100644 --- a/hw/bsp/sltb009a/board.mk +++ b/hw/bsp/sltb009a/board.mk @@ -26,7 +26,9 @@ LD_FILE = $(SILABS_CMSIS)/Source/GCC/$(SILABS_FAMILY).ld SRC_C += \ $(SILABS_CMSIS)/Source/system_$(SILABS_FAMILY).c \ - src/portable/synopsys/dwc2/dcd_dwc2.c + src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ SRC_S += \ $(SILABS_CMSIS)/Source/GCC/startup_$(SILABS_FAMILY).S diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index a01ebef5c..538a6cd66 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -102,6 +102,8 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_STM32F2 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/stm32f2/family.mk b/hw/bsp/stm32f2/family.mk index 7e71f6eed..7af9a76a0 100644 --- a/hw/bsp/stm32f2/family.mk +++ b/hw/bsp/stm32f2/family.mk @@ -26,6 +26,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake b/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake index fff6c502d..4910d3a88 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake @@ -6,6 +6,5 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F405RGTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F405xx - BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h index d1ad2a6ce..670ce8012 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h @@ -31,22 +31,35 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_1 -#define LED_STATE_ON 1 +#define UART_DEV USART3 -// Button: Pin D5 -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_7 -#define BUTTON_STATE_ACTIVE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 -// UART -#define UART_DEV USART3 -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_1, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // BUTTON + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_7, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -84,17 +97,20 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); + // Enable clocks for Uart __HAL_RCC_USART3_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +static inline void board_vbus_sense_init(uint8_t rhport) { + if (rhport == 0) { + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + } +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; } #ifdef __cplusplus diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.cmake b/hw/bsp/stm32f4/boards/pyboardv11/board.cmake index fff6c502d..4910d3a88 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.cmake +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.cmake @@ -6,6 +6,5 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F405RGTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F405xx - BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.h b/hw/bsp/stm32f4/boards/pyboardv11/board.h index c126f0666..077313518 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.h +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.h @@ -31,22 +31,35 @@ extern "C" { #endif -// Blue LED is chosen because the other LEDs are connected to ST-LINK lines. -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_4 -#define LED_STATE_ON 1 +#define UART_DEV USART2 -#define BUTTON_PORT GPIOB -#define BUTTON_PIN GPIO_PIN_3 -#define BUTTON_STATE_ACTIVE 1 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 -// Enable PA2 as the debug log UART -// It is not routed to the ST/Link on the Discovery board. -//#define UART_DEV USART2 -//#define UART_GPIO_PORT GPIOA -//#define UART_GPIO_AF GPIO_AF7_USART2 -//#define UART_TX_PIN GPIO_PIN_2 -//#define UART_RX_PIN GPIO_PIN_3 +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // BUTTON + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -84,15 +97,20 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOB_CLK_ENABLE(); + // Enable clocks for Uart + __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +static inline void board_vbus_sense_init(uint8_t rhport) { + if (rhport == 0) { + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + } +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; } #ifdef __cplusplus diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake index bf2bef38b..fab6a42d2 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake @@ -6,6 +6,5 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F401VCTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F405xx - BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h index e6c99a462..ef40089c9 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -31,23 +31,36 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_13 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 0 - // Enable PA2 as the debug log UART -//#define UART_DEV USART2 -//#define UART_GPIO_PORT GPIOA -//#define UART_GPIO_AF GPIO_AF7_USART2 -//#define UART_TX_PIN GPIO_PIN_2 -//#define UART_RX_PIN GPIO_PIN_3 +#define UART_DEV USART2 + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // BUTTON + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -85,18 +98,21 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - //__HAL_RCC_USART2_CLK_ENABLE(); + // Enable clocks for Uart + __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ +static inline void board_vbus_sense_init(uint8_t rhport) { // Blackpill doesn't use VBUS sense (B device) explicitly disable it - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; + if (rhport == 0) { + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; + } +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; } #ifdef __cplusplus diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.cmake b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.cmake index 64626d7bd..50e6b1592 100644 --- a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.cmake @@ -7,7 +7,5 @@ function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F407xx HSE_VALUE=8000000 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h index b7a6d96c2..6879d066b 100644 --- a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h @@ -31,24 +31,36 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_6 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOE -#define BUTTON_PIN GPIO_PIN_4 -#define BUTTON_STATE_ACTIVE 0 - // Enable PA2 as the debug log UART -// It is not routed to the ST/Link on the Discovery board. #define UART_DEV USART2 -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART2 -#define UART_TX_PIN GPIO_PIN_2 -#define UART_RX_PIN GPIO_PIN_3 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // BUTTON + .port = GPIOE, + .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -86,18 +98,20 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOE_CLK_ENABLE(); - __HAL_RCC_GPIOH_CLK_ENABLE(); __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ +static inline void board_vbus_sense_init(uint8_t rhport) { + if (rhport == 0) { // Black F407VET6 doesn't use VBUS sense (B device) explicitly disable it USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; + } +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; } #ifdef __cplusplus diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake b/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake index b2514dc5e..c8f0330ed 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake @@ -6,6 +6,5 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F407VGTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F407xx - BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/hw/bsp/stm32f4/boards/stm32f407disco/board.h index c38f354ce..380f8e391 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.h @@ -31,23 +31,43 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOD -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - // Enable PA2 as the debug log UART // It is not routed to the ST/Link on the Discovery board. #define UART_DEV USART2 -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART2 -#define UART_TX_PIN GPIO_PIN_2 -#define UART_RX_PIN GPIO_PIN_3 + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_14, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // BUTTON + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + } +}; //--------------------------------------------------------------------+ // RCC Clock @@ -85,17 +105,23 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); + // Enable clocks Uart __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +static inline void board_vbus_sense_init(uint8_t rhport) { + if (rhport == 0) { + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + } +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } } #ifdef __cplusplus diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake index 185507d7f..d16db508f 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake @@ -6,6 +6,5 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F411CEUx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F411xE - BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h index e6c99a462..efa618b72 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -31,23 +31,35 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_13 -#define LED_STATE_ON 0 +#define UART_DEV USART2 -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 0 - -// Enable PA2 as the debug log UART -//#define UART_DEV USART2 -//#define UART_GPIO_PORT GPIOA -//#define UART_GPIO_AF GPIO_AF7_USART2 -//#define UART_TX_PIN GPIO_PIN_2 -//#define UART_RX_PIN GPIO_PIN_3 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // BUTTON + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -85,18 +97,21 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - //__HAL_RCC_USART2_CLK_ENABLE(); + // Enable clocks for Uart + __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ +static inline void board_vbus_sense_init(uint8_t rhport) { // Blackpill doesn't use VBUS sense (B device) explicitly disable it - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; + if (rhport == 0) { + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; + } +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; } #ifdef __cplusplus diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake b/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake index 80cf94160..d7c32c27d 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake @@ -6,6 +6,5 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F411VETx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F411xE - BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/hw/bsp/stm32f4/boards/stm32f411disco/board.h index 57d1e061e..d4bad8e40 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.h @@ -31,28 +31,46 @@ extern "C" { #endif -// Orange LED -#define LED_PORT GPIOD -#define LED_PIN GPIO_PIN_13 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -// Enable PA2 as the debug log UART #define UART_DEV USART2 -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART2 -#define UART_TX_PIN GPIO_PIN_2 -#define UART_RX_PIN GPIO_PIN_3 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // BUTTON + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + } +}; //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ +static inline void board_clock_init(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct; RCC_OscInitTypeDef RCC_OscInitStruct; @@ -84,17 +102,23 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); + // Enable clocks for UART __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ +static inline void board_vbus_sense_init(uint8_t rhport) { // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + if (rhport == 0) { + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + } +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } } #ifdef __cplusplus diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake b/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake index c282af98e..59c1c3a7b 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake @@ -7,6 +7,5 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F412ZGTx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F412Zx - BOARD_TUD_RHPORT=0 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/hw/bsp/stm32f4/boards/stm32f412disco/board.h index d61b70eb9..74e664418 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.h @@ -31,28 +31,47 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOE -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - // UART Enable PA2 as the debug log UART #define UART_DEV USART2 -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART2 -#define UART_TX_PIN GPIO_PIN_2 -#define UART_RX_PIN GPIO_PIN_3 + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOE, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // BUTTON + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART2 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + } +}; //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ +static inline void board_clock_init(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct; RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; @@ -99,18 +118,25 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOE_CLK_ENABLE(); + // Enable clocks for Uart __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +static inline void board_vbus_sense_init(uint8_t rhport) { + if (rhport == 0) { + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; + } } +static inline void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } +} + + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h index 73c5f83b9..8900a1e6b 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h @@ -31,22 +31,42 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - // UART Enable for STLink VCOM #define UART_DEV USART3 -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_14, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // BUTTON + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + } +}; //--------------------------------------------------------------------+ // RCC Clock @@ -99,17 +119,22 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); + // Enable clocks for Uart __HAL_RCC_USART3_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +static inline void board_vbus_sense_init(uint8_t rhport) { + if (rhport == 0) { + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; + } +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } } #ifdef __cplusplus diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h index e5a822426..aa9de4073 100644 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h @@ -31,22 +31,43 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 // UART Enable for STLink VCOM #define UART_DEV USART3 -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_14, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // BUTTON + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + } +}; //--------------------------------------------------------------------+ // RCC Clock @@ -87,18 +108,23 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); + // Enable clocks Uart __HAL_RCC_USART3_CLK_ENABLE(); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +static inline void board_vbus_sense_init(uint8_t rhport) { + if (rhport == 0) { + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + } +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } } #ifdef __cplusplus diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index b4a661421..866a09d6f 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -26,6 +26,13 @@ #include "stm32f4xx_hal.h" #include "bsp/board_api.h" + +typedef struct { + GPIO_TypeDef* port; + GPIO_InitTypeDef pin_init; + uint8_t active_state; +} board_pindef_t; + #include "board.h" //--------------------------------------------------------------------+ @@ -42,12 +49,49 @@ void OTG_HS_IRQHandler(void) { //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -UART_HandleTypeDef UartHandle; +UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16 + } +}; void board_init(void) { board_clock_init(); //SystemCoreClockUpdate(); + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); +#ifdef __HAL_RCC_GPIOE_CLK_ENABLE + __HAL_RCC_GPIOE_CLK_ENABLE(); +#endif +#ifdef __HAL_RCC_GPIOF_CLK_ENABLE + __HAL_RCC_GPIOF_CLK_ENABLE(); +#endif +#ifdef __HAL_RCC_GPIOG_CLK_ENABLE + __HAL_RCC_GPIOG_CLK_ENABLE(); +#endif + __HAL_RCC_GPIOH_CLK_ENABLE(); +#ifdef __HAL_RCC_GPIOI_CLK_ENABLE + __HAL_RCC_GPIOI_CLK_ENABLE(); +#endif +#ifdef __HAL_RCC_GPIOJ_CLK_ENABLE + __HAL_RCC_GPIOJ_CLK_ENABLE(); +#endif + + for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { + HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); + } + #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); @@ -59,49 +103,14 @@ void board_init(void) { NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - board_led_write(false); - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - #ifdef UART_DEV - // UART - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle = (UART_HandleTypeDef) { - .Instance = UART_DEV, - .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, - .Init.WordLength = UART_WORDLENGTH_8B, - .Init.StopBits = UART_STOPBITS_1, - .Init.Parity = UART_PARITY_NONE, - .Init.HwFlowCtl = UART_HWCONTROL_NONE, - .Init.Mode = UART_MODE_TX_RX, - .Init.OverSampling = UART_OVERSAMPLING_16 - }; HAL_UART_Init(&UartHandle); #endif -#if BOARD_TUD_RHPORT == 0 - /* Configure USB FS GPIOs */ - __HAL_RCC_GPIOA_CLK_ENABLE(); + //------------- USB FS -------------// + GPIO_InitTypeDef GPIO_InitStruct; /* Configure USB D+ D- Pins */ GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; @@ -127,11 +136,9 @@ void board_init(void) { // Enable USB OTG clock __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); -#else - /* Configure USB HS GPIOs */ - __HAL_RCC_GPIOB_CLK_ENABLE(); - /* Configure USB D+ D- Pins */ + //------------- USB HS -------------// +#ifdef __HAL_RCC_USB_OTG_HS_CLK_ENABLE GPIO_InitStruct.Pin = GPIO_PIN_14 | GPIO_PIN_15; GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; @@ -166,7 +173,13 @@ void board_init(void) { HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); #endif - board_vbus_sense_init(); +#if CFG_TUD_ENABLED + board_vbus_sense_init(BOARD_TUD_RHPORT); +#endif + +#if CFG_TUH_ENABLED + board_vbus_set(BOARD_TUD_RHPORT, true); +#endif } //--------------------------------------------------------------------+ @@ -174,12 +187,22 @@ void board_init(void) { //--------------------------------------------------------------------+ void board_led_write(bool state) { - GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1 - LED_STATE_ON)); - HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); +#ifdef PINID_LED + board_pindef_t* pindef = &board_pindef[PINID_LED]; + GPIO_PinState pin_state = state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, pin_state); +#else + (void) state; +#endif } uint32_t board_button_read(void) { - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +#ifdef PINID_BUTTON + board_pindef_t* pindef = &board_pindef[PINID_BUTTON]; + return pindef->active_state == HAL_GPIO_ReadPin(pindef->port, pindef->pin_init.Pin); +#else + return 0; +#endif } size_t board_get_unique_id(uint8_t id[], size_t max_len) { diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index f24ef366e..c0c9fe902 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -16,6 +16,28 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS STM32F4 CACHE INTERNAL "") +# ---------------------- +# Port & Speed Selection +# ---------------------- +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + +if (NOT DEFINED RHPORT_SPEED) + # Most F7 does not has built-in HS PHY + set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED) +endif () +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ # BOARD_TARGET @@ -52,8 +74,12 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - # target_compile_options(${BOARD_TARGET} PUBLIC) - # target_compile_definitions(${BOARD_TARGET} PUBLIC) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) update_board(${BOARD_TARGET}) @@ -102,6 +128,8 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_STM32F4 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index 523a1cb04..51ff43a60 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -8,14 +8,40 @@ ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 -PORT ?= 0 +# ---------------------- +# Port & Speed Selection +# ---------------------- +RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 + +# Determine RHPORT_DEVICE_SPEED if not defined +ifndef RHPORT_DEVICE_SPEED +ifeq ($(RHPORT_DEVICE), 0) + RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# Determine RHPORT_HOST_SPEED if not defined +ifndef RHPORT_HOST_SPEED +ifeq ($(RHPORT_HOST), 0) + RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif # -------------- # Compiler Flags # -------------- CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 \ - -DBOARD_TUD_RHPORT=$(PORT) + -DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \ + -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ + -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ + -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ # GCC Flags CFLAGS_GCC += \ @@ -34,6 +60,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake b/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake index 378e736d4..6a1132ef8 100644 --- a/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake +++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake @@ -3,12 +3,18 @@ set(JLINK_DEVICE stm32f723xx) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F723xE_FLASH.ld) +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 1) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F723xx HSE_VALUE=25000000 - # default to PORT 1 High Speed - BOARD_TUD_RHPORT=1 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED ) endfunction() diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h index ed02df061..632fd99ed 100644 --- a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h +++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h @@ -31,29 +31,37 @@ extern "C" { #endif -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_10 -#define LED_STATE_ON 1 - -// No physical button is populated -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART6 #define UART_CLK_EN __HAL_RCC_USART6_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF8_USART6 - -#define UART_TX_PORT GPIOG -#define UART_TX_PIN GPIO_PIN_9 - -#define UART_RX_PORT GPIOG -#define UART_RX_PIN GPIO_PIN_14 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_UART_TX 1 +#define PINID_UART_RX 2 +//#define PINID_VBUS0_EN 4 +//#define PINID_VBUS1_EN 5 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF8_USART6 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_14, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF8_USART6 }, + .active_state = 0 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -92,8 +100,15 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); + + UART_CLK_EN(); } +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk b/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk index 94dce5e84..a19e455c7 100644 --- a/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk +++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk @@ -1,6 +1,10 @@ MCU_VARIANT = stm32f723xx # Only OTG-HS has a connector on this board +RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 1 + PORT ?= 1 SPEED ?= high diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake index dd3c35b00..eb3ed407b 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake @@ -1,14 +1,21 @@ set(MCU_VARIANT stm32f723xx) set(JLINK_DEVICE stm32f723ie) - +#set(JLINK_OPTION "-USB 000776606156") set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F723xE_FLASH.ld) +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +# For Hardware test: device default to PORT 0, Host to port 1 +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 1) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F723xx HSE_VALUE=25000000 - # default to PORT 1 High Speed - BOARD_TUD_RHPORT=1 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED ) endfunction() diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/hw/bsp/stm32f7/boards/stm32f723disco/board.h index 258786b7f..d45ceec5c 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.h @@ -31,33 +31,57 @@ extern "C" { #endif -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_1 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART6 #define UART_CLK_EN __HAL_RCC_USART6_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF8_USART6 - -#define UART_TX_PORT GPIOC -#define UART_TX_PIN GPIO_PIN_6 - -#define UART_RX_PORT GPIOC -#define UART_RX_PIN GPIO_PIN_7 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 +#define PINID_VBUS1_EN 5 + +static board_pindef_t board_pindef[] = { +{ // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_1, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, +{ // Button + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, +{ // UART TX + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF8_USART6 }, + .active_state = 0 + }, +{ // UART RX + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_7, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF8_USART6 }, + .active_state = 0 + }, +{ // VBUS0 EN + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_OUTPUT_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, +{ // VBUS1 EN + .port = GPIOH, + .pin_init = { .Pin = GPIO_PIN_12, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ +static inline void board_clock_init(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct; RCC_OscInitTypeDef RCC_OscInitStruct; @@ -74,7 +98,7 @@ static inline void board_clock_init(void) RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE / 1000000; RCC_OscInitStruct.PLL.PLLN = 432; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; RCC_OscInitStruct.PLL.PLLQ = 9; @@ -91,12 +115,14 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); + + UART_CLK_EN(); } -//static inline void board_vbus_sense_init(void) -//{ -// -//} +static inline void board_vbus_set(uint8_t rhport, bool state) { + board_pindef_t* pindef = &board_pindef[rhport ? PINID_VBUS1_EN : PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); +} #ifdef __cplusplus } diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk index 43e8eafe1..9b8e7a969 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk @@ -1,7 +1,9 @@ MCU_VARIANT = stm32f723xx -PORT ?= 1 -SPEED ?= high +# For Hardware test: device default to PORT 0, Host to port 1 +RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 1 CFLAGS += \ -DSTM32F723xx \ diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake index e44c164b8..bc26c6ef4 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake @@ -3,12 +3,19 @@ set(JLINK_DEVICE stm32f746xx) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F746ZGTx_FLASH.ld) +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif() + + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F746xx HSE_VALUE=25000000 - # default to PORT 1 High Speed - BOARD_TUD_RHPORT=1 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED ) endfunction() diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/hw/bsp/stm32f7/boards/stm32f746disco/board.h index 1c7e6dd2b..d8e92931e 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.h @@ -31,28 +31,43 @@ extern "C" { #endif -#define LED_PORT GPIOI -#define LED_PIN GPIO_PIN_1 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOI -#define BUTTON_PIN GPIO_PIN_11 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART1 #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF7_USART1 - -#define UART_TX_PORT GPIOA -#define UART_TX_PIN GPIO_PIN_9 - -#define UART_RX_PORT GPIOB -#define UART_RX_PIN GPIO_PIN_7 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 0 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +//#define PINID_VBUS0_EN 4 +//#define PINID_VBUS1_EN 5 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOI, + .pin_init = { .Pin = GPIO_PIN_1, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOI, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_7, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -91,8 +106,15 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); + + UART_CLK_EN(); } +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.mk b/hw/bsp/stm32f7/boards/stm32f746disco/board.mk index 61c0aaa7d..c2b54406e 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.mk @@ -1,5 +1,9 @@ MCU_VARIANT = stm32f746xx +RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 + PORT ?= 1 SPEED ?= high diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake index dd4d4a753..fd5c1ef11 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake @@ -3,11 +3,16 @@ set(JLINK_DEVICE stm32f746xx) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F746ZGTx_FLASH.ld) +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F746xx HSE_VALUE=8000000 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h index cf895af87..55e77fe5f 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h @@ -31,27 +31,43 @@ extern "C" { #endif -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF7_USART3 - -#define UART_TX_PORT GPIOD -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PORT GPIOD -#define UART_RX_PIN GPIO_PIN_9 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +//#define PINID_VBUS0_EN 4 +//#define PINID_VBUS1_EN 5 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_14, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, +}; + static inline void board_clock_init(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct; @@ -89,6 +105,12 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); + + UART_CLK_EN(); +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; } #ifdef __cplusplus diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk index 3683c79a5..fe7104eca 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk @@ -1,5 +1,8 @@ MCU_VARIANT = stm32f746xx +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 + PORT ?= 0 SPEED ?= full diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake index 679a6ce87..e4cf4c5f5 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake @@ -3,11 +3,16 @@ set(JLINK_DEVICE stm32f767zi) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F767ZITx_FLASH.ld) +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F767xx HSE_VALUE=8000000 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h index e053572a7..81cb60aeb 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h @@ -31,28 +31,43 @@ extern "C" { #endif -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF7_USART3 - -#define UART_TX_PORT GPIOD -#define UART_TX_PIN GPIO_PIN_8 - -#define UART_RX_PORT GPIOD -#define UART_RX_PIN GPIO_PIN_9 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +//#define PINID_VBUS0_EN 4 +//#define PINID_VBUS1_EN 5 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_14, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -92,8 +107,13 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); + + UART_CLK_EN(); } +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} #ifdef __cplusplus } diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk index 059ad166a..d61e0a00d 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk @@ -1,5 +1,8 @@ MCU_VARIANT = stm32f767xx +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 + PORT ?= 0 SPEED ?= full diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake index 329ada093..2335b869e 100644 --- a/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake +++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake @@ -3,12 +3,18 @@ set(JLINK_DEVICE stm32f769ni) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F769ZITx_FLASH.ld) +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 1) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F769xx HSE_VALUE=25000000 - # default to PORT 1 High Speed - BOARD_TUD_RHPORT=1 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED ) endfunction() diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.h b/hw/bsp/stm32f7/boards/stm32f769disco/board.h index 472af0b98..268919b61 100644 --- a/hw/bsp/stm32f7/boards/stm32f769disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.h @@ -31,28 +31,43 @@ extern "C" { #endif -#define LED_PORT GPIOJ -#define LED_PIN GPIO_PIN_12 -#define LED_STATE_ON 5 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART1 #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF7_USART1 - -#define UART_TX_PORT GPIOA -#define UART_TX_PIN GPIO_PIN_9 - -#define UART_RX_PORT GPIOA -#define UART_RX_PIN GPIO_PIN_10 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +//#define PINID_VBUS0_EN 4 +//#define PINID_VBUS1_EN 5 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOJ, + .pin_init = { .Pin = GPIO_PIN_12, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -92,6 +107,12 @@ static inline void board_clock_init(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); + + UART_CLK_EN(); +} + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; } #ifdef __cplusplus diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.mk b/hw/bsp/stm32f7/boards/stm32f769disco/board.mk index 705f1a633..e756c9727 100644 --- a/hw/bsp/stm32f7/boards/stm32f769disco/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.mk @@ -1,6 +1,10 @@ MCU_VARIANT = stm32f769xx # Only OTG-HS has a connector on this board +RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 1 + PORT ?= 1 SPEED ?= high diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index 61f1d2a7f..527fbfe5c 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -28,27 +28,51 @@ #include "stm32f7xx_hal.h" #include "bsp/board_api.h" + +typedef struct { + GPIO_TypeDef* port; + GPIO_InitTypeDef pin_init; + uint8_t active_state; +} board_pindef_t; + #include "board.h" //--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#ifdef UART_DEV +UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + } +}; +#endif + +//--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ void OTG_FS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } // Despite being call USB2_OTG // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port void OTG_HS_IRQHandler(void) { - tud_int_handler(1); + tusb_int_handler(1, true); } //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -UART_HandleTypeDef UartHandle; - void board_init(void) { board_clock_init(); @@ -60,12 +84,13 @@ void board_init(void) { __HAL_RCC_GPIOG_CLK_ENABLE(); __HAL_RCC_GPIOH_CLK_ENABLE(); // ULPI NXT __HAL_RCC_GPIOI_CLK_ENABLE(); // ULPI NXT - #ifdef __HAL_RCC_GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE(); #endif - UART_CLK_EN(); + for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { + HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); + } #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer @@ -80,51 +105,13 @@ void board_init(void) { NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // Uart TX - GPIO_InitStruct.Pin = UART_TX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_TX_PORT, &GPIO_InitStruct); - - // Uart RX - GPIO_InitStruct.Pin = UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_RX_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UART_DEV; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; +#ifdef UART_DEV HAL_UART_Init(&UartHandle); +#endif -#if BOARD_TUD_RHPORT == 0 - // OTG_FS + GPIO_InitTypeDef GPIO_InitStruct; + //------------- rhport0: OTG_FS -------------// /* Configure DM DP Pins */ GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; @@ -171,10 +158,8 @@ void board_init(void) { USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense -#else - // OTG_HS - - #ifdef USB_HS_PHYC + //------------- rhport1: OTG_HS -------------// +#ifdef USB_HS_PHYC // MCU with built-in HS PHY such as F723, F733, F730 /* Configure DM DP Pins */ @@ -198,7 +183,7 @@ void board_init(void) { /* Enable PHYC Clocks */ __HAL_RCC_OTGPHYC_CLK_ENABLE(); - #else +#else // MCU with external ULPI PHY /* ULPI CLK */ @@ -244,7 +229,7 @@ void board_init(void) { GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); - #endif // USB_HS_PHYC +#endif // USB_HS_PHYC // Enable USB HS & ULPI Clocks __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); @@ -261,12 +246,10 @@ void board_init(void) { USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif - // Force device mode - USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; - USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - -#endif // BOARD_TUD_RHPORT - + // Turn on host vbus +#if CFG_TUH_ENABLED + board_vbus_set(BOARD_TUH_RHPORT, true); +#endif } //--------------------------------------------------------------------+ @@ -274,12 +257,22 @@ void board_init(void) { //--------------------------------------------------------------------+ void board_led_write(bool state) { - GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1 - LED_STATE_ON)); - HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); +#ifdef PINID_LED + board_pindef_t* pindef = &board_pindef[PINID_LED]; + GPIO_PinState pin_state = state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, pin_state); +#else + (void) state; +#endif } uint32_t board_button_read(void) { - return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +#ifdef PINID_BUTTON + board_pindef_t* pindef = &board_pindef[PINID_BUTTON]; + return pindef->active_state == HAL_GPIO_ReadPin(pindef->port, pindef->pin_init.Pin); +#else + return 0; +#endif } size_t board_get_unique_id(uint8_t id[], size_t max_len) { @@ -302,8 +295,13 @@ int board_uart_read(uint8_t *buf, int len) { } int board_uart_write(void const *buf, int len) { +#ifdef UART_DEV HAL_UART_Transmit(&UartHandle, (uint8_t *) (uintptr_t) buf, len, 0xffff); return len; +#else + (void) buf; (void) len; + return -1; +#endif } #if CFG_TUSB_OS == OPT_OS_NONE diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 938c2697a..dc134e9c0 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -16,6 +16,28 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS STM32F7 CACHE INTERNAL "") +# ---------------------- +# Port & Speed Selection +# ---------------------- +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + +if (NOT DEFINED RHPORT_SPEED) + # Most F7 does not has built-in HS PHY + set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED) +endif () +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ # BOARD_TARGET @@ -54,8 +76,12 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) update_board(${BOARD_TARGET}) @@ -104,6 +130,8 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_STM32F7 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk index bae7d6d5b..abeea784c 100644 --- a/hw/bsp/stm32f7/family.mk +++ b/hw/bsp/stm32f7/family.mk @@ -8,25 +8,53 @@ ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m7-fpsp +# ---------------------- +# Port & Speed Selection +# ---------------------- +RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 + +# Determine RHPORT_DEVICE_SPEED if not defined +ifndef RHPORT_DEVICE_SPEED +ifeq ($(RHPORT_DEVICE), 0) + RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# Determine RHPORT_HOST_SPEED if not defined +ifndef RHPORT_HOST_SPEED +ifeq ($(RHPORT_HOST), 0) + RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + # -------------- # Compiler Flags # -------------- CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ - -DBOARD_TUD_RHPORT=$(PORT) + -DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \ + -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ + -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ + -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ -ifeq ($(PORT), 1) - ifeq ($(SPEED), high) - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - $(info "Using OTG_HS in HighSpeed mode") - else - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED - $(info "Using OTG_HS in FullSpeed mode") - endif -else - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED - $(info "Using OTG_FS") -endif +#ifeq ($(PORT), 1) +# ifeq ($(SPEED), high) +# CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED +# $(info "Using OTG_HS in HighSpeed mode") +# else +# CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED +# $(info "Using OTG_HS in FullSpeed mode") +# endif +#else +# CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED +# $(info "Using OTG_FS") +#endif # GCC Flags CFLAGS_GCC += \ @@ -45,6 +73,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.cmake b/hw/bsp/stm32h7/boards/daisyseed/board.cmake index 4811c97e8..ff22b3e22 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.cmake +++ b/hw/bsp/stm32h7/boards/daisyseed/board.cmake @@ -8,8 +8,5 @@ function(update_board TARGET) STM32H750xx HSE_VALUE=16000000 CORE_CM7 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.h b/hw/bsp/stm32h7/boards/daisyseed/board.h index abc07488b..2d681d640 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.h +++ b/hw/bsp/stm32h7/boards/daisyseed/board.h @@ -31,32 +31,46 @@ extern "C" { #endif -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_7 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - // UART #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_7, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void SystemClock_Config(void) -{ +static inline void SystemClock_Config(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 }; @@ -128,11 +142,14 @@ static inline void SystemClock_Config(void) HAL_EnableCompensationCell(); } -static inline void board_stm32h7_post_init(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.mk b/hw/bsp/stm32h7/boards/daisyseed/board.mk index da2eb4433..bb254cfc2 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.mk +++ b/hw/bsp/stm32h7/boards/daisyseed/board.mk @@ -1,16 +1,8 @@ +MCU_VARIANT = stm32h750xx CFLAGS += -DSTM32H750xx -DCORE_CM7 -DHSE_VALUE=16000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s LD_FILE_GCC = $(BOARD_PATH)/stm32h750ibkx_flash.ld -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf - # For flash-jlink target JLINK_DEVICE = stm32h750ibk6_m7 diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake index b7d133dfa..a6f0a5c45 100644 --- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake @@ -7,8 +7,5 @@ function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32H723xx HSE_VALUE=8000000 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h index 3d9344a87..c5257901d 100644 --- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h @@ -31,20 +31,8 @@ extern "C" { #endif -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_0 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 @@ -59,6 +47,40 @@ #define GPIO_AF10_OTG2_HS GPIO_AF10_OTG1_HS #define USB_OTG_FS USB_OTG_HS +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_OUTPUT_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -118,11 +140,16 @@ static inline void SystemClock_Config(void) HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); } -static inline void board_stm32h7_post_init(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } +} #ifdef __cplusplus } diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk index 57a316f41..c1a98a025 100644 --- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk @@ -1,15 +1,7 @@ +MCU_VARIANT = stm32h723xx CFLAGS += -DSTM32H723xx -DHSE_VALUE=8000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h723xx.s -LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h723xx_flash.ld - -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h723xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h723xx_flash.icf +LD_FILE_GCC = $(FAMILY_PATH)/linker/${MCU_VARIANT}_flash.ld # For flash-jlink target JLINK_DEVICE = stm32h723zg diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake index 6d7a97741..02c6bf5fa 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake @@ -1,15 +1,29 @@ set(MCU_VARIANT stm32h743xx) set(JLINK_DEVICE stm32h743xi) -# set(JLINK_OPTION "-USB jtrace") +#set(JLINK_OPTION "-USB jtrace") set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld) +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif() + function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${ST_MFXSTM32L152}/mfxstm32l152.c + ${ST_MFXSTM32L152}/mfxstm32l152_reg.c + ) + target_include_directories(${TARGET} PUBLIC + ${ST_MFXSTM32L152} + ) target_compile_definitions(${TARGET} PUBLIC STM32H743xx HSE_VALUE=25000000 - # default to PORT 1 High Speed - BOARD_TUD_RHPORT=1 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 22d66d735..fa9721be3 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -31,22 +31,11 @@ extern "C" { #endif -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_4 -#define LED_STATE_ON 1 - -// Tamper push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 0 +#include "mfxstm32l152.h" // Need to change jumper setting J7 and J8 from RS-232 to STLink #define UART_DEV USART1 #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF4_USART1 -#define UART_TX_PIN GPIO_PIN_14 -#define UART_RX_PIN GPIO_PIN_15 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 @@ -58,6 +47,44 @@ {GPIOB, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_10}, {GPIOB, GPIO_PIN_11}, {GPIOB, GPIO_PIN_12}, \ {GPIOB, GPIO_PIN_13}, {GPIOC, GPIO_PIN_0 }, {GPIOH, GPIO_PIN_4 }, {GPIOI, GPIO_PIN_11} +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_14, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_USART1 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_15, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_USART1 }, + .active_state = 0 + }, + { // I2C SCL for MFX VBUS + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_I2C1 }, + .active_state = 0 + }, + { // I2C SDA for MFX VBUS + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_7, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_I2C1 }, + .active_state = 1 + }, +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -132,9 +159,95 @@ static inline void SystemClock_Config(void) { HAL_EnableCompensationCell(); } -static inline void board_stm32h7_post_init(void) -{ - // For this board does nothing +//--------------------------------------------------------------------+ +// MFX +//--------------------------------------------------------------------+ +static I2C_HandleTypeDef i2c_handle = { + .Instance = I2C1, + .Init = { + .Timing = 0x10C0ECFF, + .OwnAddress1 = 0, + .AddressingMode = I2C_ADDRESSINGMODE_7BIT, + .DualAddressMode = I2C_DUALADDRESS_DISABLE, + .OwnAddress2 = 0, + .OwnAddress2Masks = I2C_OA2_NOMASK, + .GeneralCallMode = I2C_GENERALCALL_DISABLE, + .NoStretchMode = I2C_NOSTRETCH_DISABLE, + } +}; +static MFXSTM32L152_Object_t mfx_obj = { 0 }; +static MFXSTM32L152_IO_Mode_t* mfx_io = NULL; +static uint32_t mfx_vbus_pin[2] = { MFXSTM32L152_GPIO_PIN_7, MFXSTM32L152_GPIO_PIN_9 }; + +int32_t board_i2c_init(void) { + __HAL_RCC_I2C1_CLK_ENABLE(); + __HAL_RCC_I2C1_FORCE_RESET(); + __HAL_RCC_I2C1_RELEASE_RESET(); + if (HAL_I2C_Init(&i2c_handle) != HAL_OK) { + return HAL_ERROR; + } + if (HAL_I2CEx_ConfigAnalogFilter(&i2c_handle, I2C_ANALOGFILTER_ENABLE) != HAL_OK) { + return HAL_ERROR; + } + if (HAL_I2CEx_ConfigDigitalFilter(&i2c_handle, 0) != HAL_OK) { + return HAL_ERROR; + } + return 0; +} + +int32_t board_i2c_deinit(void) { + return 0; +} + +int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT (HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +static inline void board_init2(void) { + // IO control via MFX + MFXSTM32L152_IO_t io_ctx; + io_ctx.Init = board_i2c_init; + io_ctx.DeInit = board_i2c_deinit; + io_ctx.ReadReg = i2c_readreg; + io_ctx.WriteReg = i2c_writereg; + io_ctx.GetTick = (MFXSTM32L152_GetTick_Func) HAL_GetTick; + + uint16_t i2c_addr[] = { 0x84, 0x86 }; + for(uint8_t i = 0U; i < 2U; i++) { + uint32_t mfx_id; + io_ctx.Address = i2c_addr[i]; + TU_ASSERT(MFXSTM32L152_RegisterBusIO(&mfx_obj, &io_ctx) == MFXSTM32L152_OK, ); + TU_ASSERT(MFXSTM32L152_ReadID(&mfx_obj, &mfx_id) == MFXSTM32L152_OK, ); + if ((mfx_id == MFXSTM32L152_ID) || (mfx_id == MFXSTM32L152_ID_2)) { + TU_ASSERT(MFXSTM32L152_Init(&mfx_obj) == MFXSTM32L152_OK, ); + break; + } + } + + mfx_io = &MFXSTM32L152_IO_Driver; + mfx_io->IO_Start(&mfx_obj, MFXSTM32L152_GPIO_PINS_ALL); + + for(uint32_t i=0; i<2; i++) { + MFXSTM32L152_IO_Init_t io_init = { + .Pin = mfx_vbus_pin[i], + .Mode = MFXSTM32L152_GPIO_MODE_OUTPUT_PP, + .Pull = MFXSTM32L152_GPIO_PULLUP, + }; + mfx_io->Init(&mfx_obj, &io_init); + } +} + +// VBUS1 is actually controlled by USB3320C PHY (using dwc2 drivebus signal) +void board_vbus_set(uint8_t rhport, bool state) { + if (mfx_io) { + mfx_io->IO_WritePin(&mfx_obj, mfx_vbus_pin[rhport], state); + } } #ifdef __cplusplus diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.mk b/hw/bsp/stm32h7/boards/stm32h743eval/board.mk index 36882a0e5..67b403932 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.mk @@ -1,16 +1,17 @@ +MCU_VARIANT = stm32h743xx CFLAGS += -DSTM32H743xx -DHSE_VALUE=25000000 -# Default is Highspeed port -PORT ?= 1 -SPEED ?= high +RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld +LD_FILE_GCC = $(FAMILY_PATH)/linker/${MCU_VARIANT}_flash.ld -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf +SRC_C += \ + ${ST_MFXSTM32L152}/mfxstm32l152.c \ + ${ST_MFXSTM32L152}/mfxstm32l152_reg.c \ + +INC += $(TOP)/${ST_MFXSTM32L152} # For flash-jlink target JLINK_DEVICE = stm32h743xi diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc b/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc index 01458a0a9..0e5a4cc00 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc +++ b/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc @@ -4,17 +4,20 @@ CAD.pinconfig=Project naming CAD.provider= File.Version=6 GPIO.groupedBy=Group By Peripherals +I2C1.IPParameters=Timing +I2C1.Timing=0x10C0ECFF KeepUserPlacement=false Mcu.CPN=STM32H743XIH6 Mcu.Family=STM32H7 Mcu.IP0=CORTEX_M7 Mcu.IP1=DEBUG -Mcu.IP2=NVIC -Mcu.IP3=RCC -Mcu.IP4=SYS -Mcu.IP5=USB_OTG_FS -Mcu.IP6=USB_OTG_HS -Mcu.IPNb=7 +Mcu.IP2=I2C1 +Mcu.IP3=NVIC +Mcu.IP4=RCC +Mcu.IP5=SYS +Mcu.IP6=USB_OTG_FS +Mcu.IP7=USB_OTG_HS +Mcu.IPNb=8 Mcu.Name=STM32H743XIHx Mcu.Package=TFBGA240 Mcu.Pin0=PI6 @@ -190,8 +193,8 @@ Mcu.PinsNb=169 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32H743XIHx -MxCube.Version=6.8.1 -MxDb.Version=DB.6.0.81 +MxCube.Version=6.10.0 +MxDb.Version=DB.6.0.100 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false NVIC.ForceEnableDMAVector=true @@ -325,10 +328,12 @@ PB5.Signal=USB_OTG_HS_ULPI_D7 PB6.GPIOParameters=GPIO_Label PB6.GPIO_Label=I2C1_SCL [STM32L152CCT6_I2C_SCL] PB6.Locked=true +PB6.Mode=I2C PB6.Signal=I2C1_SCL PB7.GPIOParameters=GPIO_Label PB7.GPIO_Label=I2C1_SDA [STM32L152CCT6_I2C_SDA] PB7.Locked=true +PB7.Mode=I2C PB7.Signal=I2C1_SDA PB8.GPIOParameters=GPIO_Label PB8.GPIO_Label=SDIO1_CKIN @@ -880,7 +885,7 @@ ProjectManager.FreePins=false ProjectManager.HalAssertFull=false ProjectManager.HeapSize=0x200 ProjectManager.KeepUserCode=true -ProjectManager.LastFirmware=true +ProjectManager.LastFirmware=false ProjectManager.LibraryCopy=2 ProjectManager.MainLocation=Src ProjectManager.NoMain=false @@ -893,8 +898,10 @@ ProjectManager.RegisterCallBack= ProjectManager.StackSize=0x400 ProjectManager.TargetToolchain=Makefile ProjectManager.ToolChainLocation=Src/ +ProjectManager.UAScriptAfterPath= +ProjectManager.UAScriptBeforePath= ProjectManager.UnderRoot=false -ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true,4-MX_USB_OTG_HS_PCD_Init-USB_OTG_HS-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USB_OTG_HS_PCD_Init-USB_OTG_HS-false-HAL-true,4-MX_I2C1_Init-I2C1-false-HAL-true,5-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true RCC.ADCFreq_Value=50390625 RCC.AHB12Freq_Value=200000000 RCC.AHB4Freq_Value=200000000 diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake index f1532a95f..021799775 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake @@ -7,8 +7,5 @@ function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32H743xx HSE_VALUE=8000000 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h index 614e6e38b..0606f395a 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h @@ -31,25 +31,47 @@ extern "C" { #endif -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_0 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_OUTPUT_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -100,8 +122,7 @@ static inline void SystemClock_Config(void) { RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) - { + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { Error_Handler(); } @@ -116,17 +137,21 @@ static inline void SystemClock_Config(void) { PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_3; PeriphClkInitStruct.PLL3.PLL3FRACN = 0; PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; - if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) - { + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { Error_Handler(); } } -static inline void board_stm32h7_post_init(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } +} #ifdef __cplusplus } diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk index f641b77aa..d904de6d2 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk @@ -1,15 +1,7 @@ +MCU_VARIANT = stm32h743xx CFLAGS += -DSTM32H743xx -DHSE_VALUE=8000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld - -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf +LD_FILE_GCC = $(FAMILY_PATH)/linker/${MCU_VARIANT}_flash.ld # For flash-jlink target JLINK_DEVICE = stm32h743zi diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake index f1313d54e..39a9d5798 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake @@ -9,8 +9,5 @@ function(update_board TARGET) STM32H745xx HSE_VALUE=25000000 CORE_CM7 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.h b/hw/bsp/stm32h7/boards/stm32h745disco/board.h index 6d1506ca1..b9d9cdea4 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.h +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.h @@ -31,27 +31,48 @@ extern "C" { #endif -#define LED_PORT GPIOJ -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - // UART #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOJ, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_5, .Mode = GPIO_MODE_OUTPUT_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -127,11 +148,17 @@ static inline void SystemClock_Config(void) HAL_EnableCompensationCell(); } -static inline void board_stm32h7_post_init(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk index 9c3615f05..588620ce2 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk @@ -1,17 +1,12 @@ # STM32H745I-DISCO uses OTG_FS # FIXME: Reset enumerates, un/replug USB plug does not enumerate - +MCU_VARIANT = stm32h745xx CFLAGS += -DSTM32H745xx -DCORE_CM7 -DHSE_VALUE=25000000 # Default is FulSpeed port PORT ?= 0 -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h745xx.s LD_FILE_GCC = $(ST_CMSIS)/Source/Templates/gcc/linker/stm32h745xx_flash_CM7.ld - -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h745xx.s LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h745xx_flash_CM7.icf # For flash-jlink target diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake b/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake index 6303ca462..6eab26c07 100644 --- a/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake @@ -9,8 +9,5 @@ function(update_board TARGET) STM32H750xx HSE_VALUE=25000000 CORE_CM7 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h index d117637a5..f1c363082 100644 --- a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h @@ -31,27 +31,42 @@ extern "C" { #endif -#define LED_PORT GPIOE -#define LED_PIN GPIO_PIN_3 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - // UART -//#define UART_DEV USART3 -//#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -//#define UART_GPIO_PORT GPIOB -//#define UART_GPIO_AF GPIO_AF7_USART3 -//#define UART_TX_PIN GPIO_PIN_10 -//#define UART_RX_PIN GPIO_PIN_11 +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOE, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -121,10 +136,14 @@ static inline void SystemClock_Config(void) { HAL_PWREx_EnableUSBVoltageDetector(); } -static inline void board_stm32h7_post_init(void) { +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk b/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk index a50172cb0..988fed804 100644 --- a/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk @@ -1,19 +1,10 @@ # STM32H745I-DISCO uses OTG_FS # FIXME: Reset enumerates, un/replug USB plug does not enumerate - +MCU_VARIANT = stm32h750xx CFLAGS += -DSTM32H750xx -DCORE_CM7 -DHSE_VALUE=25000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s LD_FILE_GCC = $(BOARD_PATH)/stm32h750xx_flash_CM7.ld -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf - # For flash-jlink target JLINK_DEVICE = stm32h750vb diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake b/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake index e87be8255..72a139ab6 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake @@ -9,8 +9,5 @@ function(update_board TARGET) STM32H750xx HSE_VALUE=25000000 CORE_CM7 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.h b/hw/bsp/stm32h7/boards/stm32h750bdk/board.h index c5922efc4..2895f0973 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.h +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.h @@ -31,33 +31,47 @@ extern "C" { #endif -#define LED_PORT GPIOJ -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - // UART #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 -// USB HS External PHY Pin: CLK, STP, DIR, NXT, D0-D7 -#define ULPI_PINS \ - {GPIOA, GPIO_PIN_3 }, {GPIOA, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_0 }, {GPIOB, GPIO_PIN_1 }, \ - {GPIOB, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_10}, {GPIOB, GPIO_PIN_11}, {GPIOB, GPIO_PIN_12}, \ - {GPIOB, GPIO_PIN_13}, {GPIOC, GPIO_PIN_0 }, {GPIOH, GPIO_PIN_4 }, {GPIOI, GPIO_PIN_11} +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOJ, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_5, .Mode = GPIO_MODE_OUTPUT_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + } +}; //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -132,11 +146,17 @@ static inline void SystemClock_Config(void) HAL_EnableCompensationCell(); } -static inline void board_stm32h7_post_init(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk b/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk index 923c90753..6eb3eb498 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk @@ -1,19 +1,10 @@ # STM32H745I-DISCO uses OTG_FS # FIXME: Reset enumerates, un/replug USB plug does not enumerate - +MCU_VARIANT = stm32h750xx CFLAGS += -DSTM32H750xx -DCORE_CM7 -DHSE_VALUE=25000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s LD_FILE_GCC = $(BOARD_PATH)/stm32h750xx_flash_CM7.ld -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf - # For flash-jlink target JLINK_DEVICE = stm32h750xb diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake index 83c8d4833..3aaa81612 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake @@ -3,14 +3,21 @@ set(JLINK_DEVICE stm32h743xi) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld) +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32H743xx HSE_VALUE=8000000 HAL_TIM_MODULE_ENABLED - # default to PORT 1 High Speed - BOARD_TUD_RHPORT=1 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED ) target_sources(${TARGET} PUBLIC ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_tim.c diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h index 8f4af6f48..625c6a137 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h @@ -70,22 +70,9 @@ extern "C" { #endif -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_6 -#define LED_STATE_ON 1 - -// Tamper push-button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - // Need to change jumper setting J7 and J8 from RS-232 to STLink #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 @@ -101,6 +88,45 @@ #define ULPI_RST_PORT GPIOD #define ULPI_RST_PIN GPIO_PIN_14 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + + { // I2C SCL for MFX VBUS + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_I2C1 }, + .active_state = 0 + }, + { // I2C SDA for MFX VBUS + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_7, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_I2C1 }, + .active_state = 1 + }, +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -178,13 +204,12 @@ static inline void SystemClock_Config(void) static inline void timer_board_delay(TIM_HandleTypeDef* tim_hdl, uint32_t ms) { uint32_t startMs = __HAL_TIM_GET_COUNTER(tim_hdl); - while ((__HAL_TIM_GET_COUNTER(tim_hdl) - startMs) < ms) - { + while ((__HAL_TIM_GET_COUNTER(tim_hdl) - startMs) < ms) { asm("nop"); //do nothing } } -static inline void board_stm32h7_post_init(void) +static inline void board_init2(void) { // walkaround for resetting the ULPI PHY using Timer since systick is not // available when RTOS is used. @@ -230,6 +255,11 @@ static inline void board_stm32h7_post_init(void) __HAL_RCC_TIM2_CLK_DISABLE(); } +// need to short a jumper +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk index cea4bfacb..5ff2f4165 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk @@ -1,7 +1,11 @@ +MCU_VARIANT = stm32h743xx CFLAGS += -DSTM32H743xx -DHSE_VALUE=8000000 -# Default is HS port -PORT ?= 1 +RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 + +LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld # Use Timer module for ULPI PHY reset CFLAGS += -DHAL_TIM_MODULE_ENABLED @@ -9,14 +13,6 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim_ex.c -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld - -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf - # For flash-jlink target JLINK_DEVICE = stm32h743ii diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 6e4b388d6..0be18350c 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -30,8 +30,13 @@ #include "stm32h7xx_hal.h" #include "bsp/board_api.h" -TU_ATTR_UNUSED static void Error_Handler(void) { -} +TU_ATTR_UNUSED static void Error_Handler(void) { } + +typedef struct { + GPIO_TypeDef* port; + GPIO_InitTypeDef pin_init; + uint8_t active_state; +} board_pindef_t; #include "board.h" @@ -39,7 +44,20 @@ TU_ATTR_UNUSED static void Error_Handler(void) { // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -UART_HandleTypeDef UartHandle; +#ifdef UART_DEV +UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + } +}; +#endif //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler @@ -60,8 +78,6 @@ void OTG_HS_IRQHandler(void) { #ifdef TRACE_ETM void trace_etm_init(void) { // H7 trace pin is PE2 to PE6 - // __HAL_RCC_GPIOE_CLK_ENABLE(); - GPIO_InitTypeDef gpio_init; gpio_init.Pin = GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6; gpio_init.Mode = GPIO_MODE_AF_PP; @@ -83,20 +99,24 @@ void board_init(void) { // Enable All GPIOs clocks __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); // USB ULPI NXT - __HAL_RCC_GPIOC_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE(); __HAL_RCC_GPIOE_CLK_ENABLE(); __HAL_RCC_GPIOF_CLK_ENABLE(); __HAL_RCC_GPIOG_CLK_ENABLE(); - __HAL_RCC_GPIOH_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOH_CLK_ENABLE(); #ifdef __HAL_RCC_GPIOI_CLK_ENABLE - __HAL_RCC_GPIOI_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOI_CLK_ENABLE(); #endif __HAL_RCC_GPIOJ_CLK_ENABLE(); trace_etm_init(); + for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { + HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); + } + #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); @@ -115,43 +135,12 @@ void board_init(void) { GPIO_InitTypeDef GPIO_InitStruct; - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - #ifdef UART_DEV - // Uart UART_CLK_EN(); - - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UART_DEV; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); #endif -#if BOARD_TUD_RHPORT == 0 + //------------- USB FS -------------// // Despite being call USB2_OTG // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port // PA9 VUSB, PA10 ID, PA11 DM, PA12 DP @@ -195,10 +184,10 @@ void board_init(void) { USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense -#elif BOARD_TUD_RHPORT == 1 + //------------- USB HS -------------// +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1) // Despite being call USB2_OTG // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port - struct { GPIO_TypeDef* port; uint32_t pin; @@ -233,12 +222,15 @@ void board_init(void) { // Force device mode USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; +#endif HAL_PWREx_EnableUSBVoltageDetector(); - // For waveshare openh743 ULPI PHY reset walkaround - board_stm32h7_post_init(); -#endif // rhport = 1 + board_init2(); // optional init + +#if CFG_TUH_ENABLED + board_vbus_set(BOARD_TUH_RHPORT, 1); +#endif } @@ -247,12 +239,22 @@ void board_init(void) { //--------------------------------------------------------------------+ void board_led_write(bool state) { - GPIO_PinState pin_state = (GPIO_PinState)(state ? LED_STATE_ON : (1 - LED_STATE_ON)); - HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); +#ifdef PINID_LED + board_pindef_t* pindef = &board_pindef[PINID_LED]; + GPIO_PinState pin_state = state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, pin_state); +#else + (void) state; +#endif } uint32_t board_button_read(void) { - return (BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) ? 1 : 0; +#ifdef PINID_BUTTON + board_pindef_t* pindef = &board_pindef[PINID_BUTTON]; + return pindef->active_state == HAL_GPIO_ReadPin(pindef->port, pindef->pin_init.Pin); +#else + return 0; +#endif } size_t board_get_unique_id(uint8_t id[], size_t max_len) { @@ -278,14 +280,13 @@ int board_uart_write(void const *buf, int len) { #ifdef UART_DEV HAL_UART_Transmit(&UartHandle, (uint8_t * )(uintptr_t) buf, len, 0xffff); + return len; #else - (void) buf; + (void) buf; (void) len; + return -1; #endif - - return len; } - #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index 026c7c3df..3e246faed 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -5,6 +5,7 @@ set(ST_PREFIX stm32${ST_FAMILY}xx) set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(ST_MFXSTM32L152 ${TOP}/hw/mcu/st/stm32-mfxstm32l152) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # include board specific @@ -16,6 +17,28 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS STM32H7 CACHE INTERNAL "") +# ---------------------- +# Port & Speed Selection +# ---------------------- +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + +if (NOT DEFINED RHPORT_SPEED) + # Most F7 does not has built-in HS PHY + set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED) +endif () +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ # BOARD_TARGET @@ -42,6 +65,8 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c @@ -56,8 +81,12 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) update_board(${BOARD_TARGET}) @@ -106,6 +135,8 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_STM32H7 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index 40df190db..29b83cf7d 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -1,31 +1,48 @@ -UF2_FAMILY_ID = 0x6db66082 ST_FAMILY = h7 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - +ST_PREFIX = stm32${ST_FAMILY}xx ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver +ST_HAL_DRIVER = hw/mcu/st/${ST_PREFIX}_hal_driver +ST_MFXSTM32L152 = hw/mcu/st/stm32-mfxstm32l152 + +UF2_FAMILY_ID = 0x6db66082 include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m7 +# ---------------------- +# Port & Speed Selection +# ---------------------- +RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 + +# Determine RHPORT_DEVICE_SPEED if not defined +ifndef RHPORT_DEVICE_SPEED +ifeq ($(RHPORT_DEVICE), 0) + RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# Determine RHPORT_HOST_SPEED if not defined +ifndef RHPORT_HOST_SPEED +ifeq ($(RHPORT_HOST), 0) + RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + # -------------- # Compiler Flags # -------------- CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ - -DBOARD_TUD_RHPORT=$(PORT) - -ifeq ($(PORT), 1) - ifeq ($(SPEED), high) - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - $(info "Using OTG_HS in HighSpeed mode") - else - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED - $(info "Using OTG_HS in FullSpeed mode") - endif -else - $(info "Using OTG_FS") -endif + -DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \ + -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ + -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ + -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ # GCC Flags CFLAGS_GCC += \ @@ -46,20 +63,31 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart_ex.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ + $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_dma.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_gpio.c \ + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c.c \ + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart_ex.c \ INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ $(TOP)/$(ST_HAL_DRIVER)/Inc + +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s + +# Linker +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf diff --git a/hw/bsp/stm32h7/stm32h7xx_hal_conf.h b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h index 216fc82f2..303dcc137 100644 --- a/hw/bsp/stm32h7/stm32h7xx_hal_conf.h +++ b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h @@ -70,7 +70,7 @@ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_HRTIM_MODULE_ENABLED */ /* #define HAL_HSEM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ +#define HAL_I2C_MODULE_ENABLED /* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index b6eae7c7f..77876cb8b 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -104,6 +104,8 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS} ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/stm32l4/family.mk b/hw/bsp/stm32l4/family.mk index 411436cf6..950b6f9cb 100644 --- a/hw/bsp/stm32l4/family.mk +++ b/hw/bsp/stm32l4/family.mk @@ -32,6 +32,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index f7a7aeb33..3ab7cdf8b 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -102,16 +102,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32U5 ${RTOS}) - if ((${MCU_VARIANT} STREQUAL "stm32u535xx") OR (${MCU_VARIANT} STREQUAL "stm32u545xx")) - target_sources(${TARGET}-tinyusb PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - else () - target_sources(${TARGET}-tinyusb PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - #${TOP}/src/portable/st/typec/typec_stm32.c - ) - endif () + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + #${TOP}/src/portable/st/typec/typec_stm32.c + ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) # Link dependencies diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 89193b99f..05fe4608a 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -46,7 +46,9 @@ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c else SRC_C += \ - src/portable/synopsys/dwc2/dcd_dwc2.c + src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c endif INC += \ diff --git a/hw/bsp/xmc4000/family.cmake b/hw/bsp/xmc4000/family.cmake index d91e6f0b6..85444db28 100644 --- a/hw/bsp/xmc4000/family.cmake +++ b/hw/bsp/xmc4000/family.cmake @@ -86,6 +86,8 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_XMC4000 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/xmc4000/family.mk b/hw/bsp/xmc4000/family.mk index 80b38acef..a1679a2f0 100644 --- a/hw/bsp/xmc4000/family.mk +++ b/hw/bsp/xmc4000/family.mk @@ -16,6 +16,8 @@ CFLAGS += \ SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ ${SDK_DIR}/CMSIS/Infineon/COMPONENT_${MCU_VARIANT}/Source/system_${MCU_VARIANT}.c \ ${SDK_DIR}/Newlib/syscalls.c \ ${SDK_DIR}/XMCLib/src/xmc_gpio.c \ diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 8c86de433..136f658df 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -2066,8 +2066,8 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * // Avoid 64bit division uint32_t nominal = ((fb_param.sample_freq / 100) << 16) / (frame_div / 100); audio->feedback.compute.fifo_count.nom_value = nominal; - audio->feedback.compute.fifo_count.rate_const[0] = (audio->feedback.max_value - nominal) / fifo_lvl_thr; - audio->feedback.compute.fifo_count.rate_const[1] = (nominal - audio->feedback.min_value) / fifo_lvl_thr; + audio->feedback.compute.fifo_count.rate_const[0] = (uint16_t) ((audio->feedback.max_value - nominal) / fifo_lvl_thr); + audio->feedback.compute.fifo_count.rate_const[1] = (uint16_t) ((nominal - audio->feedback.min_value) / fifo_lvl_thr); // On HS feedback is more sensitive since packet size can vary every MSOF, could cause instability if(tud_speed_get() == TUSB_SPEED_HIGH) { audio->feedback.compute.fifo_count.rate_const[0] /= 8; @@ -2376,11 +2376,11 @@ static bool audiod_set_fb_params_freq(audiod_function_t* audio, uint32_t sample_ if ((mclk_freq % sample_freq) == 0 && tu_is_power_of_two(mclk_freq / sample_freq)) { audio->feedback.compute_method = AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2; - audio->feedback.compute.power_of_2 = 16 - (audio->feedback.frame_shift - 1) - tu_log2(mclk_freq / sample_freq); + audio->feedback.compute.power_of_2 = (uint8_t) (16 - (audio->feedback.frame_shift - 1) - tu_log2(mclk_freq / sample_freq)); } else if ( audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT) { - audio->feedback.compute.float_const = (float)sample_freq / mclk_freq * (1UL << (16 - (audio->feedback.frame_shift - 1))); + audio->feedback.compute.float_const = (float)sample_freq / (float) mclk_freq * (1UL << (16 - (audio->feedback.frame_shift - 1))); } else { diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index 3ad7c8baf..2d5ba2575 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -204,6 +204,9 @@ TU_ATTR_WEAK void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts); TU_ATTR_WEAK void tud_cdc_line_coding_cb(uint8_t itf, cdc_line_coding_t const* p_line_coding); // Invoked when received send break +// \param[in] itf interface for which send break was received. +// \param[in] duration_ms the length of time, in milliseconds, of the break signal. If a value of FFFFh, then the +// device will send a break until another SendBreak request is received with value 0000h. TU_ATTR_WEAK void tud_cdc_send_break_cb(uint8_t itf, uint16_t duration_ms); //--------------------------------------------------------------------+ diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 90d747185..1516c329a 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -110,8 +110,12 @@ typedef struct { NOTIFICATION_SPEED, NOTIFICATION_CONNECTED, NOTIFICATION_DONE - } notification_xmit_state; // state of notification transmission - bool notification_xmit_is_running; // notification is currently transmitted + } notification_xmit_state; // state of notification transmission + bool notification_xmit_is_running; // notification is currently transmitted + + // misc + bool tud_network_recv_renew_active; // tud_network_recv_renew() is active (avoid recursive invocations) + bool tud_network_recv_renew_process_again; // tud_network_recv_renew() should process again } ncm_interface_t; CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN tu_static ncm_interface_t ncm_interface; @@ -689,11 +693,29 @@ void tud_network_xmit(void *ref, uint16_t arg) { /** * Keep the receive logic busy and transfer pending packets to the glue logic. + * Avoid recursive calls due to wrong expectations of the net glue logic, + * see https://github.com/hathach/tinyusb/issues/2711 */ void tud_network_recv_renew(void) { TU_LOG_DRV("tud_network_recv_renew()\n"); - recv_transfer_datagram_to_glue_logic(); + ncm_interface.tud_network_recv_renew_process_again = true; + + if (ncm_interface.tud_network_recv_renew_active) { + TU_LOG_DRV("Re-entrant into tud_network_recv_renew, will process later\n"); + return; + } + + while (ncm_interface.tud_network_recv_renew_process_again) { + ncm_interface.tud_network_recv_renew_process_again = false; + + // If the current function is called within recv_transfer_datagram_to_glue_logic, + // tud_network_recv_renew_process_again will become true, and the loop will run again + // Otherwise the loop will not run again + ncm_interface.tud_network_recv_renew_active = true; + recv_transfer_datagram_to_glue_logic(); + ncm_interface.tud_network_recv_renew_active = false; + } recv_try_to_start_new_reception(ncm_interface.rhport); } // tud_network_recv_renew diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index d3e0cf888..59cc0fb48 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -123,11 +123,15 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, c //------------- Bytes -------------// TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_u32(uint8_t b3, uint8_t b2, uint8_t b1, uint8_t b0) { - return ( ((uint32_t) b3) << 24) | ( ((uint32_t) b2) << 16) | ( ((uint32_t) b1) << 8) | b0; + return (((uint32_t)b3) << 24) | (((uint32_t)b2) << 16) | (((uint32_t)b1) << 8) | b0; +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_u32_from_u16(uint16_t high, uint16_t low) { + return (((uint32_t)high) << 16) | low; } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_u16(uint8_t high, uint8_t low) { - return (uint16_t) ((((uint16_t) high) << 8) | low); + return (uint16_t)((((uint16_t)high) << 8) | low); } TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte3(uint32_t ui32) { return TU_U32_BYTE3(ui32); } diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index c77afecad..41f552d33 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -169,6 +169,7 @@ defined (STM32F107xB) || defined (STM32F107xC) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 + #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 #define TUP_DCD_ENDPOINT_MAX 4 #elif defined(STM32F102x6) || defined(STM32F102xB) || \ @@ -343,12 +344,14 @@ #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_ESP32 #define TUP_DCD_ENDPOINT_MAX 7 // only 5 TX FIFO for endpoint IN + #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 // TODO currently have issue with buffer DMA with espressif #elif TU_CHECK_MCU(OPT_MCU_ESP32P4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_ESP32 #define TUP_RHPORT_HIGHSPEED 1 // port0 FS, port1 HS #define TUP_DCD_ENDPOINT_MAX 16 // FS 7 ep, HS 16 ep + #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 // TODO currently have issue with buffer DMA with espressif #elif TU_CHECK_MCU(OPT_MCU_ESP32, OPT_MCU_ESP32C2, OPT_MCU_ESP32C3, OPT_MCU_ESP32C6, OPT_MCU_ESP32H2) #if (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 8a479c042..c71775abb 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -24,9 +24,8 @@ * This file is part of the TinyUSB stack. */ - -#ifndef _TUSB_PRIVATE_H_ -#define _TUSB_PRIVATE_H_ +#ifndef TUSB_PRIVATE_H_ +#define TUSB_PRIVATE_H_ // Internal Helper used by Host and Device Stack @@ -34,6 +33,13 @@ extern "C" { #endif +#define TUP_USBIP_CONTROLLER_NUM 2 +extern tusb_role_t _tusb_rhport_role[TUP_USBIP_CONTROLLER_NUM]; + +//--------------------------------------------------------------------+ +// Endpoint +//--------------------------------------------------------------------+ + typedef struct TU_ATTR_PACKED { volatile uint8_t busy : 1; volatile uint8_t stalled : 1; @@ -163,4 +169,4 @@ bool tu_edpt_stream_peek(tu_edpt_stream_t* s, uint8_t* ch) { } #endif -#endif /* _TUSB_PRIVATE_H_ */ +#endif diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 53bb367cb..d045a3c8f 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -41,8 +41,8 @@ typedef enum { TUSB_ROLE_INVALID = 0, - TUSB_ROLE_DEVICE, - TUSB_ROLE_HOST, + TUSB_ROLE_DEVICE = 0x1, + TUSB_ROLE_HOST = 0x2, } tusb_role_t; /// defined base on EHCI specs value for Endpoint Speed @@ -56,10 +56,10 @@ typedef enum { /// defined base on USB Specs Endpoint's bmAttributes typedef enum { - TUSB_XFER_CONTROL = 0 , - TUSB_XFER_ISOCHRONOUS , - TUSB_XFER_BULK , - TUSB_XFER_INTERRUPT + TUSB_XFER_CONTROL = 0, + TUSB_XFER_ISOCHRONOUS = 1, + TUSB_XFER_BULK = 2, + TUSB_XFER_INTERRUPT = 3 } tusb_xfer_type_t; typedef enum { @@ -224,10 +224,10 @@ enum { // USB 2.0 Spec Table 9-7: Test Mode Selectors typedef enum { TUSB_FEATURE_TEST_J = 1, - TUSB_FEATURE_TEST_K, - TUSB_FEATURE_TEST_SE0_NAK, - TUSB_FEATURE_TEST_PACKET, - TUSB_FEATURE_TEST_FORCE_ENABLE, + TUSB_FEATURE_TEST_K = 2, + TUSB_FEATURE_TEST_SE0_NAK = 3, + TUSB_FEATURE_TEST_PACKET = 4, + TUSB_FEATURE_TEST_FORCE_ENABLE = 5, } tusb_feature_test_mode_t; //--------------------------------------------------------------------+ @@ -264,7 +264,7 @@ typedef enum { } microsoft_os_20_type_t; enum { - CONTROL_STAGE_IDLE, + CONTROL_STAGE_IDLE = 0, CONTROL_STAGE_SETUP, CONTROL_STAGE_DATA, CONTROL_STAGE_ACK diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 3e0f1f106..6d02d3572 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -83,7 +83,7 @@ if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \ } while(0) -#elif defined(__riscv) && !TUP_MCU_ESPRESSIF +#elif defined(__riscv) && !TUSB_MCU_VENDOR_ESPRESSIF #define TU_BREAKPOINT() do { __asm("ebreak\n"); } while(0) #elif defined(_mips) diff --git a/src/host/usbh.c b/src/host/usbh.c index b5df29f50..b0a2b2160 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -278,15 +278,6 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); -#if CFG_TUSB_OS == OPT_OS_NONE -// TODO rework time-related function later -// weak and overridable -TU_ATTR_WEAK void osal_task_delay(uint32_t msec) { - const uint32_t start = hcd_frame_number(_usbh_controller); - while ( ( hcd_frame_number(_usbh_controller) - start ) < msec ) {} -} -#endif - TU_ATTR_ALWAYS_INLINE static inline bool queue_event(hcd_event_t const * event, bool in_isr) { TU_ASSERT(osal_queue_send(_usbh_q, event, in_isr)); tuh_event_hook_cb(event->rhport, event->event_id, in_isr); @@ -447,9 +438,9 @@ bool tuh_deinit(uint8_t rhport) { } bool tuh_task_event_ready(void) { - // Skip if stack is not initialized - if ( !tuh_inited() ) return false; - + if (!tuh_inited()) { + return false; // Skip if stack is not initialized + } return !osal_queue_empty(_usbh_q); } @@ -487,17 +478,27 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // due to the shared _usbh_ctrl_buf, we must complete enumerating one device before enumerating another one. // TODO better to have an separated queue for newly attached devices if (_dev0.enumerating) { - TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); + // Some device can cause multiple duplicated attach events + // drop current enumerating and start over for a proper port reset + if (event.rhport == _dev0.rhport && event.connection.hub_addr == _dev0.hub_addr && + event.connection.hub_port == _dev0.hub_port) { + // abort/cancel current enumeration and start new one + TU_LOG1("[%u:] USBH Device Attach (duplicated)\r\n", event.rhport); + tuh_edpt_abort_xfer(0, 0); + enum_new_device(&event); + } else { + TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); - bool is_empty = osal_queue_empty(_usbh_q); - queue_event(&event, in_isr); + bool is_empty = osal_queue_empty(_usbh_q); + queue_event(&event, in_isr); - if (is_empty) { - // Exit if this is the only event in the queue, otherwise we may loop forever - return; + if (is_empty) { + // Exit if this is the only event in the queue, otherwise we may loop forever + return; + } } } else { - TU_LOG_USBH("[%u:] USBH DEVICE ATTACH\r\n", event.rhport); + TU_LOG1("[%u:] USBH Device Attach\r\n", event.rhport); _dev0.enumerating = 1; enum_new_device(&event); } @@ -603,12 +604,12 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { TU_VERIFY(xfer->ep_addr == 0 && xfer->setup); // Check if device is still connected (enumerating for dev0) - uint8_t const daddr = xfer->daddr; - if ( daddr == 0 ) { - if (!_dev0.enumerating) return false; + const uint8_t daddr = xfer->daddr; + if (daddr == 0) { + TU_VERIFY(_dev0.enumerating); } else { - usbh_device_t const* dev = get_device(daddr); - if (dev && dev->connected == 0) return false; + const usbh_device_t* dev = get_device(daddr); + TU_VERIFY(dev && dev->connected); } // pre-check to help reducing mutex lock @@ -778,24 +779,26 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer) { } bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { - usbh_device_t* dev = get_device(daddr); - TU_VERIFY(dev); - TU_LOG_USBH("[%u] Aborted transfer on EP %02X\r\n", daddr, ep_addr); - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + const uint8_t epnum = tu_edpt_number(ep_addr); + const uint8_t dir = tu_edpt_dir(ep_addr); + + if (epnum == 0) { + // Also include dev0 for aborting enumerating + const uint8_t rhport = usbh_get_rhport(daddr); - if ( epnum == 0 ) { // control transfer: only 1 control at a time, check if we are aborting the current one TU_VERIFY(daddr == _ctrl_xfer.daddr && _ctrl_xfer.stage != CONTROL_STAGE_IDLE); - TU_VERIFY(hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr)); - // reset control transfer state to idle - _set_control_xfer_stage(CONTROL_STAGE_IDLE); + hcd_edpt_abort_xfer(rhport, daddr, ep_addr); + _set_control_xfer_stage(CONTROL_STAGE_IDLE); // reset control transfer state to idle } else { - // non-control skip if not busy - TU_VERIFY(dev->ep_status[epnum][dir].busy); - TU_VERIFY(hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr)); + usbh_device_t* dev = get_device(daddr); + TU_VERIFY(dev); + + TU_VERIFY(dev->ep_status[epnum][dir].busy); // non-control skip if not busy + hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); + // mark as ready and release endpoint if transfer is aborted dev->ep_status[epnum][dir].busy = false; tu_edpt_release(&dev->ep_status[epnum][dir], _usbh_mutex); @@ -1281,9 +1284,9 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu //--------------------------------------------------------------------+ enum { - ENUM_RESET_DELAY = 50, // USB specs: 10 to 50ms - ENUM_CONTACT_DEBOUNCING_DELAY = 450, // when plug/unplug a device, physical connection can be bouncing and may - // generate a series of attach/detach event. This delay wait for stable connection + ENUM_RESET_DELAY_MS = 50, // USB specs: 10 to 50ms + ENUM_DEBOUNCING_DELAY_MS = 450, // when plug/unplug a device, physical connection can be bouncing and may + // generate a series of attach/detach event. This delay wait for stable connection }; enum { @@ -1322,7 +1325,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { bool retry = _dev0.enumerating && (failed_count < ATTEMPT_COUNT_MAX); if ( retry ) { failed_count++; - osal_task_delay(ATTEMPT_DELAY_MS); // delay a bit + tusb_time_delay_ms_api(ATTEMPT_DELAY_MS); // delay a bit TU_LOG1("Enumeration attempt %u\r\n", failed_count); retry = tuh_control_xfer(xfer); } @@ -1364,7 +1367,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { } case ENUM_HUB_GET_STATUS_2: - osal_task_delay(ENUM_RESET_DELAY); + tusb_time_delay_ms_api(ENUM_RESET_DELAY_MS); TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, process_enumeration, ENUM_HUB_CLEAR_RESET_2),); break; @@ -1402,7 +1405,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { if (_dev0.hub_addr == 0) { // connected directly to roothub hcd_port_reset( _dev0.rhport ); - osal_task_delay(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since + tusb_time_delay_ms_api(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since // sof of controller may not running while resetting hcd_port_reset_end(_dev0.rhport); // TODO: fall through to SET ADDRESS, refactor later @@ -1424,9 +1427,9 @@ static void process_enumeration(tuh_xfer_t* xfer) { case ENUM_GET_DEVICE_DESC: { // Allow 2ms for address recovery time, Ref USB Spec 9.2.6.3 - osal_task_delay(2); + tusb_time_delay_ms_api(2); - uint8_t const new_addr = (uint8_t) tu_le16toh(xfer->setup->wValue); + const uint8_t new_addr = (uint8_t) tu_le16toh(xfer->setup->wValue); usbh_device_t* new_dev = get_device(new_addr); TU_ASSERT(new_dev,); @@ -1514,20 +1517,25 @@ static void process_enumeration(tuh_xfer_t* xfer) { } } + + static bool enum_new_device(hcd_event_t* event) { _dev0.rhport = event->rhport; _dev0.hub_addr = event->connection.hub_addr; _dev0.hub_port = event->connection.hub_port; if (_dev0.hub_addr == 0) { - // connected/disconnected directly with roothub + // connected directly to roothub hcd_port_reset(_dev0.rhport); - osal_task_delay(ENUM_RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since - // sof of controller may not running while resetting + + // Since we are in middle of rhport reset, frame number is not available yet. + // need to depend on tusb_time_millis_api() + tusb_time_delay_ms_api(ENUM_RESET_DELAY_MS); + hcd_port_reset_end(_dev0.rhport); // wait until device connection is stable TODO non blocking - osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY); + tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS); // device unplugged while delaying if (!hcd_port_connect_status(_dev0.rhport)) { @@ -1548,12 +1556,11 @@ static bool enum_new_device(hcd_event_t* event) { } #if CFG_TUH_HUB else { - // connected/disconnected via external hub + // connected via external hub // wait until device connection is stable TODO non blocking - osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY); + tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS); // ENUM_HUB_GET_STATUS - //TU_ASSERT( hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, enum_hub_get_status0_complete, 0) ); TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, process_enumeration, ENUM_HUB_CLEAR_RESET_1)); } diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index f30ec5ee3..fe67de8dc 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -35,45 +35,7 @@ #define DWC2_DEBUG 2 #include "device/dcd.h" -#include "dwc2_type.h" - -// Following symbols must be defined by port header -// - _dwc2_controller[]: array of controllers -// - DWC2_EP_MAX: largest EP counts of all controllers -// - dwc2_phy_init/dwc2_phy_update: phy init called before and after core reset -// - dwc2_dcd_int_enable/dwc2_dcd_int_disable -// - dwc2_remote_wakeup_delay - -#if defined(TUP_USBIP_DWC2_STM32) - #include "dwc2_stm32.h" -#elif defined(TUP_USBIP_DWC2_ESP32) - #include "dwc2_esp32.h" -#elif TU_CHECK_MCU(OPT_MCU_GD32VF103) - #include "dwc2_gd32.h" -#elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) - #include "dwc2_bcm.h" -#elif TU_CHECK_MCU(OPT_MCU_EFM32GG) - #include "dwc2_efm32.h" -#elif TU_CHECK_MCU(OPT_MCU_XMC4000) - #include "dwc2_xmc.h" -#else - #error "Unsupported MCUs" -#endif - -enum { - DWC2_CONTROLLER_COUNT = TU_ARRAY_SIZE(_dwc2_controller) -}; - -// DWC2 registers -//#define DWC2_REG(_port) ((dwc2_regs_t*) _dwc2_controller[_port].reg_base) - -TU_ATTR_ALWAYS_INLINE static inline dwc2_regs_t* DWC2_REG(uint8_t rhport) { - if (rhport >= DWC2_CONTROLLER_COUNT) { - // user mis-configured, ignore and use first controller - rhport = 0; - } - return (dwc2_regs_t*) _dwc2_controller[rhport].reg_base; -} +#include "dwc2_common.h" //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM @@ -94,7 +56,7 @@ static xfer_ctl_t xfer_status[DWC2_EP_MAX][2]; // EP0 transfers are limited to 1 packet - larger sizes has to be split static uint16_t ep0_pending[2]; // Index determines direction as tusb_dir_t type -static uint16_t _dfifo_top; // top free location in FIFO RAM +static uint16_t _dfifo_top; // top free location in DFIFO in words // Number of IN endpoints active static uint8_t _allocated_ep_in_count; @@ -106,20 +68,10 @@ static bool _sof_en; // DMA //-------------------------------------------------------------------- -TU_ATTR_ALWAYS_INLINE static inline bool dma_enabled(const dwc2_regs_t* dwc2) { - #if !CFG_TUD_DWC2_DMA +TU_ATTR_ALWAYS_INLINE static inline bool dma_device_enabled(const dwc2_regs_t* dwc2) { (void) dwc2; - return false; - #else // Internal DMA only - return (dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA); - #endif -} - -TU_ATTR_ALWAYS_INLINE static inline uint16_t dma_cal_epfifo_base(uint8_t rhport) { - // Scatter/Gather DMA mode is not yet supported. Buffer DMA only need 1 words per endpoint direction - const dwc2_controller_t* dwc2_controller = &_dwc2_controller[rhport]; - return dwc2_controller->ep_fifo_size/4 - 2*dwc2_controller->ep_count; + return CFG_TUD_DWC2_DMA && dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA; } static void dma_setup_prepare(uint8_t rhport) { @@ -141,18 +93,8 @@ static void dma_setup_prepare(uint8_t rhport) { // Data FIFO //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline void dfifo_flush_tx(dwc2_regs_t* dwc2, uint8_t epnum) { - // flush TX fifo and wait for it cleared - dwc2->grstctl = GRSTCTL_TXFFLSH | (epnum << GRSTCTL_TXFNUM_Pos); - while (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) {} -} -TU_ATTR_ALWAYS_INLINE static inline void dfifo_flush_rx(dwc2_regs_t* dwc2) { - // flush RX fifo and wait for it cleared - dwc2->grstctl = GRSTCTL_RXFFLSH; - while (dwc2->grstctl & GRSTCTL_RXFFLSH_Msk) {} -} -/* USB Data FIFO Layout +/* Device Data FIFO scheme The FIFO is split up into - EPInfo: for storing DMA metadata, only required when use DMA. Maximum size is called @@ -167,11 +109,9 @@ TU_ATTR_ALWAYS_INLINE static inline void dfifo_flush_rx(dwc2_regs_t* dwc2) { possible since the free space is located between the RX and TX FIFOs. ---------------- ep_fifo_size - | EPInfo | - | for DMA | + | DxEPIDMAn | |-------------|-- gdfifocfg.EPINFOBASE (max is ghwcfg3.dfifo_depth) - | IN FIFO 0 | - | control | + | IN FIFO 0 | control EP |-------------| | IN FIFO 1 | |-------------| @@ -190,13 +130,13 @@ TU_ATTR_ALWAYS_INLINE static inline void dfifo_flush_rx(dwc2_regs_t* dwc2) { - All EP OUT shared a unique OUT FIFO which uses (for Slave or Buffer DMA, Scatt/Gather DMA use different formula): - 13 for setup packets + control words (up to 3 setup packets). - 1 for global NAK (not required/used here). - - Largest-EPsize / 4 + 1. ( FS: 64 bytes, HS: 512 bytes). Recommended is "2 x (Largest-EPsize/4) + 1" + - Largest-EPsize/4 + 1. ( FS: 64 bytes, HS: 512 bytes). Recommended is "2 x (Largest-EPsize/4 + 1)" - 2 for each used OUT endpoint Therefore GRXFSIZ = 13 + 1 + 2 x (Largest-EPsize/4 + 1) + 2 x EPOUTnum */ -TU_ATTR_ALWAYS_INLINE static inline uint16_t calc_grxfsiz(uint16_t largest_ep_size, uint8_t ep_count) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t calc_device_grxfsiz(uint16_t largest_ep_size, uint8_t ep_count) { return 13 + 1 + 2 * ((largest_ep_size / 4) + 1) + 2 * ep_count; } @@ -212,7 +152,7 @@ static bool dfifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { uint16_t fifo_size = tu_div_ceil(packet_size, 4); if (dir == TUSB_DIR_OUT) { // Calculate required size of RX FIFO - uint16_t const new_sz = calc_grxfsiz(4 * fifo_size, ep_count); + uint16_t const new_sz = calc_device_grxfsiz(4 * fifo_size, ep_count); // If size_rx needs to be extended check if there is enough free space if (dwc2->grxfsiz < new_sz) { @@ -227,7 +167,7 @@ static bool dfifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { } // If The TXFELVL is configured as half empty, the fifo must be twice the max_size. - if ((dwc2->gahbcfg & GAHBCFG_TXFELVL) == 0) { + if ((dwc2->gahbcfg & GAHBCFG_TX_FIFO_EPMTY_LVL) == 0) { fifo_size *= 2; } @@ -248,75 +188,27 @@ static bool dfifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { return true; } -static void dfifo_init(uint8_t rhport) { +static void dfifo_device_init(uint8_t rhport) { const dwc2_controller_t* dwc2_controller = &_dwc2_controller[rhport]; dwc2_regs_t* dwc2 = DWC2_REG(rhport); - dwc2->grxfsiz = calc_grxfsiz(CFG_TUD_ENDPOINT0_SIZE, dwc2_controller->ep_count); + dwc2->grxfsiz = calc_device_grxfsiz(CFG_TUD_ENDPOINT0_SIZE, dwc2_controller->ep_count); - if(dma_enabled(dwc2)) { - // DMA use last DFIFO to store metadata - _dfifo_top = dma_cal_epfifo_base(rhport); - }else { - _dfifo_top = dwc2_controller->ep_fifo_size / 4; + // Scatter/Gather DMA mode is not yet supported. Buffer DMA only need 1 words per endpoint direction + const bool is_dma = dma_device_enabled(dwc2); + _dfifo_top = dwc2_controller->ep_fifo_size/4; + if (is_dma) { + _dfifo_top -= 2 * dwc2_controller->ep_count; } + dwc2->gdfifocfg = (_dfifo_top << GDFIFOCFG_EPINFOBASE_SHIFT) | _dfifo_top; // Allocate FIFO for EP0 IN dfifo_alloc(rhport, 0x80, CFG_TUD_ENDPOINT0_SIZE); } -// Read a single data packet from receive FIFO -static void dfifo_read_packet(uint8_t rhport, uint8_t* dst, uint16_t len) { - (void) rhport; - - dwc2_regs_t* dwc2 = DWC2_REG(rhport); - volatile const uint32_t* rx_fifo = dwc2->fifo[0]; - - // Reading full available 32 bit words from fifo - uint16_t full_words = len >> 2; - while (full_words--) { - tu_unaligned_write32(dst, *rx_fifo); - dst += 4; - } - - // Read the remaining 1-3 bytes from fifo - uint8_t const bytes_rem = len & 0x03; - if (bytes_rem != 0) { - uint32_t const tmp = *rx_fifo; - dst[0] = tu_u32_byte0(tmp); - if (bytes_rem > 1) dst[1] = tu_u32_byte1(tmp); - if (bytes_rem > 2) dst[2] = tu_u32_byte2(tmp); - } -} - -// Write a single data packet to EPIN FIFO -static void dfifo_write_packet(uint8_t rhport, uint8_t fifo_num, uint8_t const* src, uint16_t len) { - (void) rhport; - - dwc2_regs_t* dwc2 = DWC2_REG(rhport); - volatile uint32_t* tx_fifo = dwc2->fifo[fifo_num]; - - // Pushing full available 32 bit words to fifo - uint16_t full_words = len >> 2; - while (full_words--) { - *tx_fifo = tu_unaligned_read32(src); - src += 4; - } - - // Write the remaining 1-3 bytes into fifo - uint8_t const bytes_rem = len & 0x03; - if (bytes_rem) { - uint32_t tmp_word = src[0]; - if (bytes_rem > 1) tmp_word |= (src[1] << 8); - if (bytes_rem > 2) tmp_word |= (src[2] << 16); - - *tx_fifo = tmp_word; - } -} //-------------------------------------------------------------------- // Endpoint //-------------------------------------------------------------------- - static void edpt_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const epnum = tu_edpt_number(p_endpoint_desc->bEndpointAddress); @@ -421,7 +313,7 @@ static void bus_reset(uint8_t rhport) { dwc2->diepmsk = DIEPMSK_TOM | DIEPMSK_XFRCM; // 4. Set up DFIFO - dfifo_init(rhport); + dfifo_device_init(rhport); // 5. Reset device address dwc2->dcfg &= ~DCFG_DAD_Msk; @@ -433,7 +325,7 @@ static void bus_reset(uint8_t rhport) { xfer_status[0][TUSB_DIR_OUT].max_size = 64; xfer_status[0][TUSB_DIR_IN].max_size = 64; - if(dma_enabled(dwc2)) { + if(dma_device_enabled(dwc2)) { dma_setup_prepare(rhport); } else { dwc2->epout[0].doeptsiz |= (3 << DOEPTSIZ_STUPCNT_Pos); @@ -463,9 +355,9 @@ static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t c if (dir == TUSB_DIR_IN) { // A full IN transfer (multiple packets, possibly) triggers XFRC. dep->dieptsiz = (num_packets << DIEPTSIZ_PKTCNT_Pos) | - ((total_bytes << DIEPTSIZ_XFRSIZ_Pos) & DIEPTSIZ_XFRSIZ_Msk); + ((total_bytes << DIEPTSIZ_XFRSIZ_Pos) & DIEPTSIZ_XFRSIZ_Msk); - if(dma_enabled(dwc2)) { + if(dma_device_enabled(dwc2)) { dep->diepdma = (uintptr_t)xfer->buffer; // For ISO endpoint set correct odd/even bit for next frame. @@ -503,7 +395,7 @@ static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t c dep->doepctl |= (odd_frame_now ? DOEPCTL_SD0PID_SEVNFRM_Msk : DOEPCTL_SODDFRM_Msk); } - if(dma_enabled(dwc2)) { + if(dma_device_enabled(dwc2)) { dep->doepdma = (uintptr_t)xfer->buffer; } @@ -511,174 +403,41 @@ static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t c } } -/*------------------------------------------------------------------*/ -/* Controller API - *------------------------------------------------------------------*/ - -static void reset_core(dwc2_regs_t* dwc2) { - // reset core - dwc2->grstctl |= GRSTCTL_CSRST; - - // wait for reset bit is cleared - // TODO version 4.20a should wait for RESET DONE mask - while (dwc2->grstctl & GRSTCTL_CSRST) {} - - // wait for AHB master IDLE - while (!(dwc2->grstctl & GRSTCTL_AHBIDL)) {} - - // wait for device mode ? -} - -static bool phy_hs_supported(dwc2_regs_t* dwc2) { - (void) dwc2; - -#if !TUD_OPT_HIGH_SPEED - return false; -#else - return dwc2->ghwcfg2_bm.hs_phy_type != GHWCFG2_HSPHY_NOT_SUPPORTED; -#endif -} - -static void phy_fs_init(dwc2_regs_t* dwc2) { - TU_LOG(DWC2_DEBUG, "Fullspeed PHY init\r\n"); - - // Select FS PHY - dwc2->gusbcfg |= GUSBCFG_PHYSEL; - - // MCU specific PHY init before reset - dwc2_phy_init(dwc2, GHWCFG2_HSPHY_NOT_SUPPORTED); - - // Reset core after selecting PHY - reset_core(dwc2); - - // USB turnaround time is critical for certification where long cables and 5-Hubs are used. - // So if you need the AHB to run at less than 30 MHz, and if USB turnaround time is not critical, - // these bits can be programmed to a larger value. Default is 5 - dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_TRDT_Msk) | (5u << GUSBCFG_TRDT_Pos); - - // MCU specific PHY update post reset - dwc2_phy_update(dwc2, GHWCFG2_HSPHY_NOT_SUPPORTED); - - // set max speed - dwc2->dcfg = (dwc2->dcfg & ~DCFG_DSPD_Msk) | (DCFG_DSPD_FS << DCFG_DSPD_Pos); -} - -static void phy_hs_init(dwc2_regs_t* dwc2) { - uint32_t gusbcfg = dwc2->gusbcfg; - - // De-select FS PHY - gusbcfg &= ~GUSBCFG_PHYSEL; - - if (dwc2->ghwcfg2_bm.hs_phy_type == GHWCFG2_HSPHY_ULPI) { - TU_LOG(DWC2_DEBUG, "Highspeed ULPI PHY init\r\n"); - - // Select ULPI - gusbcfg |= GUSBCFG_ULPI_UTMI_SEL; - - // ULPI 8-bit interface, single data rate - gusbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL); - - // default internal VBUS Indicator and Drive - gusbcfg &= ~(GUSBCFG_ULPIEVBUSD | GUSBCFG_ULPIEVBUSI); - - // Disable FS/LS ULPI - gusbcfg &= ~(GUSBCFG_ULPIFSLS | GUSBCFG_ULPICSM); - } else { - TU_LOG(DWC2_DEBUG, "Highspeed UTMI+ PHY init\r\n"); - - // Select UTMI+ with 8-bit interface - gusbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16); - - // Set 16-bit interface if supported - if (dwc2->ghwcfg4_bm.phy_data_width) { - gusbcfg |= GUSBCFG_PHYIF16; - } - } - - // Apply config - dwc2->gusbcfg = gusbcfg; - - // mcu specific phy init - dwc2_phy_init(dwc2, dwc2->ghwcfg2_bm.hs_phy_type); - - // Reset core after selecting PHY - reset_core(dwc2); - - // Set turn-around, must after core reset otherwise it will be clear - // - 9 if using 8-bit PHY interface - // - 5 if using 16-bit PHY interface - gusbcfg &= ~GUSBCFG_TRDT_Msk; - gusbcfg |= (dwc2->ghwcfg4_bm.phy_data_width ? 5u : 9u) << GUSBCFG_TRDT_Pos; - dwc2->gusbcfg = gusbcfg; - - // MCU specific PHY update post reset - dwc2_phy_update(dwc2, dwc2->ghwcfg2_bm.hs_phy_type); - - // Set max speed - uint32_t dcfg = dwc2->dcfg; - dcfg &= ~DCFG_DSPD_Msk; - dcfg |= DCFG_DSPD_HS << DCFG_DSPD_Pos; - - // XCVRDLY: transceiver delay between xcvr_sel and txvalid during device chirp is required - // when using with some PHYs such as USB334x (USB3341, USB3343, USB3346, USB3347) - if (dwc2->ghwcfg2_bm.hs_phy_type == GHWCFG2_HSPHY_ULPI) { - dcfg |= DCFG_XCVRDLY; - } - - dwc2->dcfg = dcfg; -} - -static bool check_dwc2(dwc2_regs_t* dwc2) { -#if CFG_TUSB_DEBUG >= DWC2_DEBUG - // print guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4 - // Run 'python dwc2_info.py' and check dwc2_info.md for bit-field value and comparison with other ports - volatile uint32_t const* p = (volatile uint32_t const*) &dwc2->guid; - TU_LOG1("guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4\r\n"); - for (size_t i = 0; i < 5; i++) { - TU_LOG1("0x%08" PRIX32 ", ", p[i]); - } - TU_LOG1("0x%08" PRIX32 "\r\n", p[5]); -#endif - - // For some reason: GD32VF103 snpsid and all hwcfg register are always zero (skip it) - (void) dwc2; -#if !TU_CHECK_MCU(OPT_MCU_GD32VF103) - uint32_t const gsnpsid = dwc2->gsnpsid & GSNPSID_ID_MASK; - TU_ASSERT(gsnpsid == DWC2_OTG_ID || gsnpsid == DWC2_FS_IOT_ID || gsnpsid == DWC2_HS_IOT_ID); -#endif - - return true; -} - +//-------------------------------------------------------------------- +// Controller API +//-------------------------------------------------------------------- bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { - (void) rhport; (void) rh_init; - // Programming model begins in the last section of the chapter on the USB - // peripheral in each Reference Manual. dwc2_regs_t* dwc2 = DWC2_REG(rhport); - // Check Synopsys ID register, failed if controller clock/power is not enabled - TU_ASSERT(check_dwc2(dwc2)); - dcd_disconnect(rhport); + // Core Initialization + const bool is_highspeed = dwc2_core_is_highspeed(dwc2, TUSB_ROLE_DEVICE); + TU_ASSERT(dwc2_core_init(rhport, is_highspeed)); - if (phy_hs_supported(dwc2)) { - phy_hs_init(dwc2); // Highspeed + if (dma_device_enabled(dwc2)) { + // DMA seems to be only settable after a core reset, and not possible to switch on-the-fly + dwc2->gahbcfg |= GAHBCFG_DMAEN | GAHBCFG_HBSTLEN_2; } else { - phy_fs_init(dwc2); // core does not support highspeed or hs phy is not present + dwc2->gintmsk |= GINTSTS_RXFLVL; } - // Restart PHY clock - dwc2->pcgctl &= ~(PCGCTL_STOPPCLK | PCGCTL_GATEHCLK | PCGCTL_PWRCLMP | PCGCTL_RSTPDWNMODULE); + // Device Initialization + dcd_disconnect(rhport); - /* Set HS/FS Timeout Calibration to 7 (max available value). - * The number of PHY clocks that the application programs in - * this field is added to the high/full speed interpacket timeout - * duration in the core to account for any additional delays - * introduced by the PHY. This can be required, because the delay - * introduced by the PHY in generating the linestate condition - * can vary from one PHY to another. - */ - dwc2->gusbcfg |= (7ul << GUSBCFG_TOCAL_Pos); + // Set device max speed + uint32_t dcfg = dwc2->dcfg & ~DCFG_DSPD_Msk; + if (is_highspeed) { + dcfg |= DCFG_DSPD_HS << DCFG_DSPD_Pos; + + // XCVRDLY: transceiver delay between xcvr_sel and txvalid during device chirp is required + // when using with some PHYs such as USB334x (USB3341, USB3343, USB3346, USB3347) + if (dwc2->ghwcfg2_bm.hs_phy_type == GHWCFG2_HSPHY_ULPI) { + dcfg |= DCFG_XCVRDLY; + } + }else { + dcfg |= DCFG_DSPD_FS << DCFG_DSPD_Pos; + } + dwc2->dcfg = dcfg; // Force device mode dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_FHMOD) | GUSBCFG_FDMOD; @@ -686,48 +445,19 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // Clear A override, force B Valid dwc2->gotgctl = (dwc2->gotgctl & ~GOTGCTL_AVALOEN) | GOTGCTL_BVALOEN | GOTGCTL_BVALOVAL; - // If USB host misbehaves during status portion of control xfer - // (non zero-length packet), send STALL back and discard. + // If USB host misbehaves during status portion of control xfer (non zero-length packet), send STALL back and discard dwc2->dcfg |= DCFG_NZLSOHSK; - dfifo_flush_tx(dwc2, 0x10); // all tx fifo - dfifo_flush_rx(dwc2); - - // Clear all interrupts - uint32_t int_mask = dwc2->gintsts; - dwc2->gintsts |= int_mask; - int_mask = dwc2->gotgint; - dwc2->gotgint |= int_mask; - - // Required as part of core initialization. - dwc2->gintmsk = GINTMSK_OTGINT | GINTMSK_USBSUSPM | GINTMSK_USBRST | GINTMSK_ENUMDNEM | GINTMSK_WUIM; - - // Configure TX FIFO empty level for interrupt. Default is complete empty - dwc2->gahbcfg |= GAHBCFG_TXFELVL; - - if (dma_enabled(dwc2)) { - const uint16_t epinfo_base = dma_cal_epfifo_base(rhport); - dwc2->gdfifocfg = (epinfo_base << GDFIFOCFG_EPINFOBASE_SHIFT) | epinfo_base; + // Enable required interrupts + dwc2->gintmsk |= GINTMSK_OTGINT | GINTMSK_USBSUSPM | GINTMSK_USBRST | GINTMSK_ENUMDNEM | GINTMSK_WUIM; - // DMA seems to be only settable after a core reset - dwc2->gahbcfg |= GAHBCFG_DMAEN | GAHBCFG_HBSTLEN_2; - }else { - dwc2->gintmsk |= GINTMSK_RXFLVLM; - } - - // Enable global interrupt - dwc2->gahbcfg |= GAHBCFG_GINT; - - // make sure we are in device mode -// TU_ASSERT(!(dwc2->gintsts & GINTSTS_CMOD), ); - -// TU_LOG_HEX(DWC2_DEBUG, dwc2->gotgctl); -// TU_LOG_HEX(DWC2_DEBUG, dwc2->gusbcfg); -// TU_LOG_HEX(DWC2_DEBUG, dwc2->dcfg); -// TU_LOG_HEX(DWC2_DEBUG, dwc2->gahbcfg); + // TX FIFO empty level for interrupt is complete empty + uint32_t gahbcfg = dwc2->gahbcfg; + gahbcfg |= GAHBCFG_TX_FIFO_EPMTY_LVL; + gahbcfg |= GAHBCFG_GINT; // Enable global interrupt + dwc2->gahbcfg = gahbcfg; dcd_connect(rhport); - return true; } @@ -847,7 +577,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dfifo_flush_tx(dwc2, 0x10); // all tx fifo dfifo_flush_rx(dwc2); - dfifo_init(rhport); // re-init dfifo + dfifo_device_init(rhport); // re-init dfifo } bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { @@ -878,11 +608,10 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to // Schedule the first transaction for EP0 transfer edpt_schedule_packets(rhport, epnum, dir, 1, ep0_pending[dir]); } else { - uint16_t num_packets = (total_bytes / xfer->max_size); - uint16_t const short_packet_size = total_bytes % xfer->max_size; - - // Zero-size packet is special case. - if ((short_packet_size > 0) || (total_bytes == 0)) num_packets++; + uint16_t num_packets = tu_div_ceil(total_bytes, xfer->max_size); + if (num_packets == 0) { + num_packets = 1; // zero length packet still count as 1 + } // Schedule packets to be sent within interrupt edpt_schedule_packets(rhport, epnum, dir, num_packets, total_bytes); @@ -926,8 +655,9 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { } void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); edpt_disable(rhport, ep_addr, true); - if((tu_edpt_number(ep_addr) == 0) && dma_enabled(DWC2_REG(rhport))) { + if((tu_edpt_number(ep_addr) == 0) && dma_device_enabled(dwc2)) { dma_setup_prepare(rhport); } } @@ -950,16 +680,15 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { // Process shared receive FIFO, this interrupt is only used in Slave mode static void handle_rxflvl_irq(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); - volatile uint32_t const* rx_fifo = dwc2->fifo[0]; + const volatile uint32_t* rx_fifo = dwc2->fifo[0]; // Pop control word off FIFO - uint32_t const grxstsp = dwc2->grxstsp; - uint8_t const pktsts = (grxstsp & GRXSTSP_PKTSTS_Msk) >> GRXSTSP_PKTSTS_Pos; - uint8_t const epnum = (grxstsp & GRXSTSP_EPNUM_Msk) >> GRXSTSP_EPNUM_Pos; - uint16_t const bcnt = (grxstsp & GRXSTSP_BCNT_Msk) >> GRXSTSP_BCNT_Pos; + const dwc2_grxstsp_t grxstsp_bm = dwc2->grxstsp_bm; + const uint8_t epnum = grxstsp_bm.ep_ch_num; + const uint16_t byte_count = grxstsp_bm.byte_count; dwc2_epout_t* epout = &dwc2->epout[epnum]; - switch (pktsts) { + switch (grxstsp_bm.packet_status) { // Global OUT NAK: do nothing case GRXSTS_PKTSTS_GLOBALOUTNAK: break; @@ -984,18 +713,18 @@ static void handle_rxflvl_irq(uint8_t rhport) { // Read packet off RxFIFO if (xfer->ff) { // Ring buffer - tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void*) (uintptr_t) rx_fifo, bcnt); + tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void*) (uintptr_t) rx_fifo, byte_count); } else { // Linear buffer - dfifo_read_packet(rhport, xfer->buffer, bcnt); + dfifo_read_packet(dwc2, xfer->buffer, byte_count); // Increment pointer to xfer data - xfer->buffer += bcnt; + xfer->buffer += byte_count; } - // Truncate transfer length in case of short packet - if (bcnt < xfer->max_size) { - xfer->total_len -= (epout->doeptsiz & DOEPTSIZ_XFRSIZ_Msk) >> DOEPTSIZ_XFRSIZ_Pos; + // short packet, minus remaining bytes (xfer_size) + if (byte_count < xfer->max_size) { + xfer->total_len -= epout->doeptsiz_bm.xfer_size; if (epnum == 0) { xfer->total_len -= ep0_pending[TUSB_DIR_OUT]; ep0_pending[TUSB_DIR_OUT] = 0; @@ -1044,7 +773,7 @@ static void handle_epout_irq(uint8_t rhport) { if (doepint & DOEPINT_SETUP) { epout->doepint = DOEPINT_SETUP; - if(dma_enabled(dwc2)) { + if(dma_device_enabled(dwc2)) { dma_setup_prepare(rhport); } @@ -1060,7 +789,7 @@ static void handle_epout_irq(uint8_t rhport) { if (!(doepint & (DOEPINT_SETUP | DOEPINT_STPKTRX | DOEPINT_STSPHSRX))) { xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); - if(dma_enabled(dwc2)) { + if(dma_device_enabled(dwc2)) { if ((epnum == 0) && ep0_pending[TUSB_DIR_OUT]) { // EP0 can only handle one packet Schedule another packet to be received. edpt_schedule_packets(rhport, epnum, TUSB_DIR_OUT, 1, ep0_pending[TUSB_DIR_OUT]); @@ -1092,8 +821,7 @@ static void handle_epout_irq(uint8_t rhport) { static void handle_epin_irq(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); - uint8_t const ep_count = _dwc2_controller[rhport].ep_count; - dwc2_epin_t* epin = dwc2->epin; + const uint8_t ep_count = _dwc2_controller[rhport].ep_count; // DAINT for a given EP clears when DIEPINTx is cleared. // IEPINT will be cleared when DAINT's out bits are cleared. @@ -1101,16 +829,17 @@ static void handle_epin_irq(uint8_t rhport) { if (dwc2->daint & TU_BIT(DAINT_IEPINT_Pos + n)) { // IN XFER complete (entire xfer). xfer_ctl_t* xfer = XFER_CTL_BASE(n, TUSB_DIR_IN); + dwc2_epin_t* epin = &dwc2->epin[n]; - if (epin[n].diepint & DIEPINT_XFRC) { - epin[n].diepint = DIEPINT_XFRC; + if (epin->diepint & DIEPINT_XFRC) { + epin->diepint = DIEPINT_XFRC; // EP0 can only handle one packet if ((n == 0) && ep0_pending[TUSB_DIR_IN]) { // Schedule another packet to be transmitted. edpt_schedule_packets(rhport, n, TUSB_DIR_IN, 1, ep0_pending[TUSB_DIR_IN]); } else { - if((n == 0) && dma_enabled(dwc2)) { + if((n == 0) && dma_device_enabled(dwc2)) { dma_setup_prepare(rhport); } dcd_event_xfer_complete(rhport, n | TUSB_DIR_IN_MASK, xfer->total_len, XFER_RESULT_SUCCESS, true); @@ -1118,39 +847,38 @@ static void handle_epin_irq(uint8_t rhport) { } // XFER FIFO empty - if ((epin[n].diepint & DIEPINT_TXFE) && (dwc2->diepempmsk & (1 << n))) { + if ((epin->diepint & DIEPINT_TXFE) && (dwc2->diepempmsk & (1 << n))) { // diepint's TXFE bit is read-only, software cannot clear it. // It will only be cleared by hardware when written bytes is more than // - 64 bytes or - // - Half of TX FIFO size (configured by DIEPTXF) - - uint16_t remaining_packets = (epin[n].dieptsiz & DIEPTSIZ_PKTCNT_Msk) >> DIEPTSIZ_PKTCNT_Pos; + // - Half/Empty of TX FIFO size (configured by GAHBCFG.TXFELVL) + const uint16_t remain_packets = epin->dieptsiz_bm.packet_count; // Process every single packet (only whole packets can be written to fifo) - for (uint16_t i = 0; i < remaining_packets; i++) { - uint16_t const remaining_bytes = (epin[n].dieptsiz & DIEPTSIZ_XFRSIZ_Msk) >> DIEPTSIZ_XFRSIZ_Pos; + for (uint16_t i = 0; i < remain_packets; i++) { + const uint16_t remain_bytes = (uint16_t) epin->dieptsiz_bm.xfer_size; // Packet can not be larger than ep max size - uint16_t const packet_size = tu_min16(remaining_bytes, xfer->max_size); + const uint16_t xact_bytes = tu_min16(remain_bytes, xfer->max_size); // It's only possible to write full packets into FIFO. Therefore DTXFSTS register of current // EP has to be checked if the buffer can take another WHOLE packet - if (packet_size > ((epin[n].dtxfsts & DTXFSTS_INEPTFSAV_Msk) << 2)) break; + if (xact_bytes > ((epin->dtxfsts & DTXFSTS_INEPTFSAV_Msk) << 2)) { + break; + } // Push packet to Tx-FIFO if (xfer->ff) { volatile uint32_t* tx_fifo = dwc2->fifo[n]; - tu_fifo_read_n_const_addr_full_words(xfer->ff, (void*) (uintptr_t) tx_fifo, packet_size); + tu_fifo_read_n_const_addr_full_words(xfer->ff, (void*) (uintptr_t) tx_fifo, xact_bytes); } else { - dfifo_write_packet(rhport, n, xfer->buffer, packet_size); - - // Increment pointer to xfer data - xfer->buffer += packet_size; + dfifo_write_packet(dwc2, n, xfer->buffer, xact_bytes); + xfer->buffer += xact_bytes; } } // Turn off TXFE if all bytes are written. - if (((epin[n].dieptsiz & DIEPTSIZ_XFRSIZ_Msk) >> DIEPTSIZ_XFRSIZ_Pos) == 0) { + if (epin->dieptsiz_bm.xfer_size == 0) { dwc2->diepempmsk &= ~(1 << n); } } @@ -1160,21 +888,11 @@ static void handle_epin_irq(uint8_t rhport) { /* Interrupt Hierarchy - DxEPMSK.XferComplMsk DxEPINTn.XferCompl - | | - +---------- AND --------+ - | - DAINT.xEPnInt DAINTMSK.xEPnMsk - | | - +---------- AND --------+ - | - GINTSTS.xEPInt GINTMSK.xEPIntMsk - | | - +---------- AND --------+ - | - GAHBCFG.GblIntrMsk - | - IRQn + DxEPINTn + | + DAINT.xEPn + | + GINTSTS: xEPInt Note: when OTG_MULTI_PROC_INTRPT = 1, Device Each endpoint interrupt deachint/deachmsk/diepeachmsk/doepeachmsk are combined to generate dedicated interrupt line for each endpoint. diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c new file mode 100644 index 000000000..4d62cf3c6 --- /dev/null +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -0,0 +1,302 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#define DWC2_COMMON_DEBUG 2 + +#if defined(TUP_USBIP_DWC2) && (CFG_TUH_ENABLED || CFG_TUD_ENABLED) + +#if CFG_TUD_ENABLED +#include "device/dcd.h" +#endif + +#if CFG_TUH_ENABLED +#include "host/hcd.h" +#endif + +#include "dwc2_common.h" + +//-------------------------------------------------------------------- +// +//-------------------------------------------------------------------- +static void reset_core(dwc2_regs_t* dwc2) { + // reset core + dwc2->grstctl |= GRSTCTL_CSRST; + + if ((dwc2->gsnpsid & DWC2_CORE_REV_MASK) < (DWC2_CORE_REV_4_20a & DWC2_CORE_REV_MASK)) { + // prior v42.0 CSRST is self-clearing + while (dwc2->grstctl & GRSTCTL_CSRST) {} + } else { + // From v4.20a CSRST bit is write only, CSRT_DONE (w1c) is introduced for checking. + // CSRST must also be explicitly cleared + while (!(dwc2->grstctl & GRSTCTL_CSRST_DONE)) {} + dwc2->grstctl = (dwc2->grstctl & ~GRSTCTL_CSRST) | GRSTCTL_CSRST_DONE; + } + + while (!(dwc2->grstctl & GRSTCTL_AHBIDL)) {} // wait for AHB master IDLE +} + +static void phy_fs_init(dwc2_regs_t* dwc2) { + TU_LOG(DWC2_COMMON_DEBUG, "Fullspeed PHY init\r\n"); + + uint32_t gusbcfg = dwc2->gusbcfg; + + // Select FS PHY + gusbcfg |= GUSBCFG_PHYSEL; + dwc2->gusbcfg = gusbcfg; + + // MCU specific PHY init before reset + dwc2_phy_init(dwc2, GHWCFG2_HSPHY_NOT_SUPPORTED); + + // Reset core after selecting PHY + reset_core(dwc2); + + // USB turnaround time is critical for certification where long cables and 5-Hubs are used. + // So if you need the AHB to run at less than 30 MHz, and if USB turnaround time is not critical, + // these bits can be programmed to a larger value. Default is 5 + gusbcfg &= ~GUSBCFG_TRDT_Msk; + gusbcfg |= 5u << GUSBCFG_TRDT_Pos; + dwc2->gusbcfg = gusbcfg; + + // MCU specific PHY update post reset + dwc2_phy_update(dwc2, GHWCFG2_HSPHY_NOT_SUPPORTED); +} + +static void phy_hs_init(dwc2_regs_t* dwc2) { + uint32_t gusbcfg = dwc2->gusbcfg; + + // De-select FS PHY + gusbcfg &= ~GUSBCFG_PHYSEL; + + if (dwc2->ghwcfg2_bm.hs_phy_type == GHWCFG2_HSPHY_ULPI) { + TU_LOG(DWC2_COMMON_DEBUG, "Highspeed ULPI PHY init\r\n"); + + // Select ULPI PHY (external) + gusbcfg |= GUSBCFG_ULPI_UTMI_SEL; + + // ULPI is always 8-bit interface + gusbcfg &= ~GUSBCFG_PHYIF16; + + // ULPI select single data rate + gusbcfg &= ~GUSBCFG_DDRSEL; + + // default internal VBUS Indicator and Drive + gusbcfg &= ~(GUSBCFG_ULPIEVBUSD | GUSBCFG_ULPIEVBUSI); + + // Disable FS/LS ULPI + gusbcfg &= ~(GUSBCFG_ULPIFSLS | GUSBCFG_ULPICSM); + } else { + TU_LOG(DWC2_COMMON_DEBUG, "Highspeed UTMI+ PHY init\r\n"); + + // Select UTMI+ PHY (internal) + gusbcfg &= ~GUSBCFG_ULPI_UTMI_SEL; + + // Set 16-bit interface if supported + if (dwc2->ghwcfg4_bm.phy_data_width) { + gusbcfg |= GUSBCFG_PHYIF16; // 16 bit + } else { + gusbcfg &= ~GUSBCFG_PHYIF16; // 8 bit + } + } + + // Apply config + dwc2->gusbcfg = gusbcfg; + + // mcu specific phy init + dwc2_phy_init(dwc2, dwc2->ghwcfg2_bm.hs_phy_type); + + // Reset core after selecting PHY + reset_core(dwc2); + + // Set turn-around, must after core reset otherwise it will be clear + // - 9 if using 8-bit PHY interface + // - 5 if using 16-bit PHY interface + gusbcfg &= ~GUSBCFG_TRDT_Msk; + gusbcfg |= (dwc2->ghwcfg4_bm.phy_data_width ? 5u : 9u) << GUSBCFG_TRDT_Pos; + dwc2->gusbcfg = gusbcfg; + + // MCU specific PHY update post reset + dwc2_phy_update(dwc2, dwc2->ghwcfg2_bm.hs_phy_type); +} + +static bool check_dwc2(dwc2_regs_t* dwc2) { +#if CFG_TUSB_DEBUG >= DWC2_COMMON_DEBUG + // print guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4 + // Run 'python dwc2_info.py' and check dwc2_info.md for bit-field value and comparison with other ports + volatile uint32_t const* p = (volatile uint32_t const*) &dwc2->guid; + TU_LOG1("guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4\r\n"); + for (size_t i = 0; i < 5; i++) { + TU_LOG1("0x%08" PRIX32 ", ", p[i]); + } + TU_LOG1("0x%08" PRIX32 "\r\n", p[5]); +#endif + + // For some reason: GD32VF103 gsnpsid and all hwcfg register are always zero (skip it) + (void)dwc2; +#if !TU_CHECK_MCU(OPT_MCU_GD32VF103) + enum { GSNPSID_ID_MASK = TU_GENMASK(31, 16) }; + const uint32_t gsnpsid = dwc2->gsnpsid & GSNPSID_ID_MASK; + TU_ASSERT(gsnpsid == DWC2_OTG_ID || gsnpsid == DWC2_FS_IOT_ID || gsnpsid == DWC2_HS_IOT_ID); +#endif + + return true; +} + +//-------------------------------------------------------------------- +// +//-------------------------------------------------------------------- +bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role) { + (void)dwc2; + +#if CFG_TUD_ENABLED + if (role == TUSB_ROLE_DEVICE && !TUD_OPT_HIGH_SPEED) { + return false; + } +#endif +#if CFG_TUH_ENABLED + if (role == TUSB_ROLE_HOST && !TUH_OPT_HIGH_SPEED) { + return false; + } +#endif + + return dwc2->ghwcfg2_bm.hs_phy_type != GHWCFG2_HSPHY_NOT_SUPPORTED; +} + +/* dwc2 has several PHYs option + * - UTMI+ is internal highspeed PHY, clock can be 30 Mhz (8-bit) or 60 Mhz (16-bit) + * - ULPI is external highspeed PHY, clock is 60Mhz with only 8-bit interface + * - Dedicated FS PHY is internal with clock 48Mhz. + * + * In addition, UTMI+/ULPI can be shared to run at fullspeed mode with 48Mhz + * +*/ +bool dwc2_core_init(uint8_t rhport, bool is_highspeed) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + // Check Synopsys ID register, failed if controller clock/power is not enabled + TU_ASSERT(check_dwc2(dwc2)); + + // disable global interrupt + dwc2->gahbcfg &= ~GAHBCFG_GINT; + + if (is_highspeed) { + phy_hs_init(dwc2); + } else { + phy_fs_init(dwc2); + } + + /* Set HS/FS Timeout Calibration to 7 (max available value). + * The number of PHY clocks that the application programs in + * this field is added to the high/full speed interpacket timeout + * duration in the core to account for any additional delays + * introduced by the PHY. This can be required, because the delay + * introduced by the PHY in generating the linestate condition + * can vary from one PHY to another. */ + dwc2->gusbcfg |= (7ul << GUSBCFG_TOCAL_Pos); + + // Enable PHY clock TODO stop/gate clock when suspended mode + dwc2->pcgcctl &= ~(PCGCCTL_STOPPCLK | PCGCCTL_GATEHCLK | PCGCCTL_PWRCLMP | PCGCCTL_RSTPDWNMODULE); + + dfifo_flush_tx(dwc2, 0x10); // all tx fifo + dfifo_flush_rx(dwc2); + + // Clear pending and disable all interrupts + dwc2->gintsts = 0xFFFFFFFFU; + dwc2->gotgint = 0xFFFFFFFFU; + dwc2->gintmsk = 0; + + return true; +} + +// void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr) { +// (void) in_isr; +// dwc2_regs_t * const dwc2 = DWC2_REG(rhport); +// const uint32_t int_mask = dwc2->gintmsk; +// const uint32_t int_status = dwc2->gintsts & int_mask; +// +// // Device disconnect +// if (int_status & GINTSTS_DISCINT) { +// dwc2->gintsts = GINTSTS_DISCINT; +// } +// +// } + +//-------------------------------------------------------------------- +// DFIFO +//-------------------------------------------------------------------- +// Read a single data packet from receive DFIFO +void dfifo_read_packet(dwc2_regs_t* dwc2, uint8_t* dst, uint16_t len) { + const volatile uint32_t* rx_fifo = dwc2->fifo[0]; + + // Reading full available 32 bit words from fifo + uint16_t word_count = len >> 2; + while (word_count--) { + tu_unaligned_write32(dst, *rx_fifo); + dst += 4; + } + + // Read the remaining 1-3 bytes from fifo + const uint8_t bytes_rem = len & 0x03; + if (bytes_rem != 0) { + const uint32_t tmp = *rx_fifo; + dst[0] = tu_u32_byte0(tmp); + if (bytes_rem > 1) { + dst[1] = tu_u32_byte1(tmp); + } + if (bytes_rem > 2) { + dst[2] = tu_u32_byte2(tmp); + } + } +} + +// Write a single data packet to DFIFO +void dfifo_write_packet(dwc2_regs_t* dwc2, uint8_t fifo_num, const uint8_t* src, uint16_t len) { + volatile uint32_t* tx_fifo = dwc2->fifo[fifo_num]; + + // Pushing full available 32 bit words to fifo + uint16_t word_count = len >> 2; + while (word_count--) { + *tx_fifo = tu_unaligned_read32(src); + src += 4; + } + + // Write the remaining 1-3 bytes into fifo + const uint8_t bytes_rem = len & 0x03; + if (bytes_rem) { + uint32_t tmp_word = src[0]; + if (bytes_rem > 1) { + tmp_word |= (src[1] << 8); + } + if (bytes_rem > 2) { + tmp_word |= (src[2] << 16); + } + + *tx_fifo = tmp_word; + } +} + +#endif diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h new file mode 100644 index 000000000..3f7f23c3a --- /dev/null +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -0,0 +1,101 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2024 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef TUSB_DWC2_COMMON_H +#define TUSB_DWC2_COMMON_H + +#include "common/tusb_common.h" +#include "dwc2_type.h" + +// Following symbols must be defined by port header +// - _dwc2_controller[]: array of controllers +// - DWC2_EP_MAX: largest EP counts of all controllers +// - dwc2_phy_init/dwc2_phy_update: phy init called before and after core reset +// - dwc2_dcd_int_enable/dwc2_dcd_int_disable +// - dwc2_remote_wakeup_delay + +#if defined(TUP_USBIP_DWC2_STM32) + #include "dwc2_stm32.h" +#elif defined(TUP_USBIP_DWC2_ESP32) + #include "dwc2_esp32.h" +#elif TU_CHECK_MCU(OPT_MCU_GD32VF103) + #include "dwc2_gd32.h" +#elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) + #include "dwc2_bcm.h" +#elif TU_CHECK_MCU(OPT_MCU_EFM32GG) + #include "dwc2_efm32.h" +#elif TU_CHECK_MCU(OPT_MCU_XMC4000) + #include "dwc2_xmc.h" +#else + #error "Unsupported MCUs" +#endif + +enum { + DWC2_CONTROLLER_COUNT = TU_ARRAY_SIZE(_dwc2_controller) +}; + +enum { + OTG_INT_COMMON = 0 // GINTSTS_DISCINT | GINTSTS_CONIDSTSCHNG +}; + +//--------------------------------------------------------------------+ +// Core/Controller +//--------------------------------------------------------------------+ +TU_ATTR_ALWAYS_INLINE static inline dwc2_regs_t* DWC2_REG(uint8_t rhport) { + if (rhport >= DWC2_CONTROLLER_COUNT) { + // user mis-configured, ignore and use first controller + rhport = 0; + } + return (dwc2_regs_t*)_dwc2_controller[rhport].reg_base; +} + +bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role); +bool dwc2_core_init(uint8_t rhport, bool is_highspeed); +void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr); + +//--------------------------------------------------------------------+ +// DFIFO +//--------------------------------------------------------------------+ +TU_ATTR_ALWAYS_INLINE static inline void dfifo_flush_tx(dwc2_regs_t* dwc2, uint8_t fnum) { + // flush TX fifo and wait for it cleared + dwc2->grstctl = GRSTCTL_TXFFLSH | (fnum << GRSTCTL_TXFNUM_Pos); + while (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) {} +} + +TU_ATTR_ALWAYS_INLINE static inline void dfifo_flush_rx(dwc2_regs_t* dwc2) { + // flush RX fifo and wait for it cleared + dwc2->grstctl = GRSTCTL_RXFFLSH; + while (dwc2->grstctl & GRSTCTL_RXFFLSH_Msk) {} +} + +void dfifo_read_packet(dwc2_regs_t* dwc2, uint8_t* dst, uint16_t len); +void dfifo_write_packet(dwc2_regs_t* dwc2, uint8_t fifo_num, uint8_t const* src, uint16_t len); + +//--------------------------------------------------------------------+ +// DMA +//--------------------------------------------------------------------+ + +#endif diff --git a/src/portable/synopsys/dwc2/dwc2_esp32.h b/src/portable/synopsys/dwc2/dwc2_esp32.h index 4cdbcdb7a..42ab4b80f 100644 --- a/src/portable/synopsys/dwc2/dwc2_esp32.h +++ b/src/portable/synopsys/dwc2/dwc2_esp32.h @@ -25,13 +25,14 @@ */ -#ifndef _DWC2_ESP32_H_ -#define _DWC2_ESP32_H_ +#ifndef TUSB_DWC2_ESP32_H_ +#define TUSB_DWC2_ESP32_H_ #ifdef __cplusplus extern "C" { #endif +#include "freertos/FreeRTOS.h" #include "freertos/task.h" #include "esp_intr_alloc.h" @@ -59,21 +60,37 @@ static const dwc2_controller_t _dwc2_controller[] = { }; #endif +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ static intr_handle_t usb_ih[TU_ARRAY_SIZE(_dwc2_controller)]; -static void dcd_int_handler_wrap(void* arg) { - const uint8_t rhport = (uint8_t)(uintptr_t) arg; - dcd_int_handler(rhport); +static void dwc2_int_handler_wrap(void* arg) { + const uint8_t rhport = tu_u16_low((uint16_t)(uintptr_t)arg); + const tusb_role_t role = (tusb_role_t) tu_u16_high((uint16_t)(uintptr_t)arg); +#if CFG_TUD_ENABLED + if (role == TUSB_ROLE_DEVICE) { + dcd_int_handler(rhport); + } +#endif +#if CFG_TUH_ENABLED + if (role == TUSB_ROLE_HOST) { + hcd_int_handler(rhport, true); + } +#endif } -TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_enable(uint8_t rhport) { - esp_intr_alloc(_dwc2_controller[rhport].irqnum, ESP_INTR_FLAG_LOWMED, - dcd_int_handler_wrap, (void*)(uintptr_t) rhport, &usb_ih[rhport]); +TU_ATTR_ALWAYS_INLINE static inline void dwc2_int_set(uint8_t rhport, tusb_role_t role, bool enabled) { + if (enabled) { + esp_intr_alloc(_dwc2_controller[rhport].irqnum, ESP_INTR_FLAG_LOWMED, + dwc2_int_handler_wrap, (void*)(uintptr_t)tu_u16(role, rhport), &usb_ih[rhport]); + } else { + esp_intr_free(usb_ih[rhport]); + } } -TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_disable(uint8_t rhport) { - esp_intr_free(usb_ih[rhport]); -} +#define dwc2_dcd_int_enable(_rhport) dwc2_int_set(_rhport, TUSB_ROLE_DEVICE, true) +#define dwc2_dcd_int_disable(_rhport) dwc2_int_set(_rhport, TUSB_ROLE_DEVICE, false) TU_ATTR_ALWAYS_INLINE static inline void dwc2_remote_wakeup_delay(void) { vTaskDelay(pdMS_TO_TICKS(1)); @@ -83,14 +100,15 @@ TU_ATTR_ALWAYS_INLINE static inline void dwc2_remote_wakeup_delay(void) { TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { (void)dwc2; (void)hs_phy_type; - // nothing to do + // maybe usb_utmi_hal_init() + } // MCU specific PHY update, it is called AFTER init() and core reset TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_update(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { (void)dwc2; (void)hs_phy_type; - // nothing to do + // maybe usb_utmi_hal_disable() } #ifdef __cplusplus diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index cfd0c81a8..dec021f59 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/767 FS | ST F723/L4P5 FS | ST F723 HS | ST F769 | ST H743/H750 | ST L476 FS | ST U5A5 HS | GD32VF103 | XMC4500 | -|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:------------|:-------------| -| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | -| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | -| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | DMA internal | -| - p2p (hub support) | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | -| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | -| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 0 | 13 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 2 | 2 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - ptx_q_depth | 2 | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | -| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | -| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 0 | 634 | -| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | -| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | +| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5 HS | XMC4500 | GD32VF103 | +|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:-------------|:------------| +| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00AEC000 | 0x00001000 | +| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54292A | 0x00000000 | +| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 2.92a | 0.00W | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228F5930 | 0x00000000 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | Slave only | +| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | n/a | hub | +| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | Dedicated | n/a | +| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 13 | 0 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | +| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | +| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 634 | 0 | +| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | +| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index d1793a005..25edcf22d 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -15,16 +15,15 @@ dwc2_reg_value = { 'ESP32-P4': [0, 0x4F54400A, 0, 0x215FFFD0, 0x03805EB5, 0xDFF1A030], 'ST F207/F407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x020001E8, 0x0FF08030], 'ST F407/429 HS': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x03F403E8, 0x17F00030], - 'ST F412/767 FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], + 'ST F412/76x FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST F723/L4P5 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x03EED2E8, 0x23F00030], - 'ST F769': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], + 'ST F76x HS': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030], 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], - 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030] - } # Combine dwc2_info with dwc2_reg_list @@ -44,7 +43,7 @@ class GHWCFG2(ctypes.LittleEndianStructure): _fields_ = [ ("op_mode", ctypes.c_uint32, 3), ("arch", ctypes.c_uint32, 2), - ("p2p (hub support)", ctypes.c_uint32, 1), + ("single_point", ctypes.c_uint32, 1), ("hs_phy_type", ctypes.c_uint32, 2), ("fs_phy_type", ctypes.c_uint32, 2), ("num_dev_ep", ctypes.c_uint32, 4), @@ -119,6 +118,10 @@ GHWCFG2_field = { 1: "DMA external", 2: "DMA internal" }, + 'single_point': { + 0: "hub", + 1: "n/a" + }, 'hs_phy_type': { 0: "n/a", 1: "UTMI+", @@ -130,7 +133,18 @@ GHWCFG2_field = { 1: "Dedicated", 2: "Shared UTMI+", 3: "Shared ULPI" - } + }, + 'nptx_q_depth': { + 0: "2", + 1: "4", + 2: "8", + }, + 'ptx_q_depth': { + 0: "2", + 1: "4", + 2: "8", + 3: "16" + }, } # mapping for specific fields in GHWCFG4 diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 395b6d870..8719c4820 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -124,13 +124,19 @@ static const dwc2_controller_t _dwc2_controller[] = { // SystemCoreClock is already included by family header // extern uint32_t SystemCoreClock; -TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_enable(uint8_t rhport) { - NVIC_EnableIRQ((IRQn_Type) _dwc2_controller[rhport].irqnum); +TU_ATTR_ALWAYS_INLINE static inline void dwc2_int_set(uint8_t rhport, tusb_role_t role, bool enabled) { + (void) role; + const IRQn_Type irqn = (IRQn_Type) _dwc2_controller[rhport].irqnum; + if (enabled) { + NVIC_EnableIRQ(irqn); + } else { + NVIC_DisableIRQ(irqn); + } } -TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_disable(uint8_t rhport) { - NVIC_DisableIRQ((IRQn_Type) _dwc2_controller[rhport].irqnum); -} +#define dwc2_dcd_int_enable(_rhport) dwc2_int_set(_rhport, TUSB_ROLE_DEVICE, true) +#define dwc2_dcd_int_disable(_rhport) dwc2_int_set(_rhport, TUSB_ROLE_DEVICE, false) + TU_ATTR_ALWAYS_INLINE static inline void dwc2_remote_wakeup_delay(void) { // try to delay for 1 ms diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index cf05bbfec..1247f19a3 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -31,8 +31,8 @@ * opensource.org/licenses/BSD-3-Clause */ -#ifndef _TUSB_DWC2_TYPES_H_ -#define _TUSB_DWC2_TYPES_H_ +#ifndef TUSB_DWC2_TYPES_H_ +#define TUSB_DWC2_TYPES_H_ #include "stdint.h" @@ -87,6 +87,11 @@ typedef struct #endif enum { + GOTGCTL_OTG_VERSION_1_3 = 0, + GOTGCTL_OTG_VERSION_2_0 = 1, +}; + +enum { GHWCFG2_OPMODE_HNP_SRP = 0, GHWCFG2_OPMODE_SRP = 1, GHWCFG2_OPMODE_NON_HNP_NON_SRP = 2, @@ -122,8 +127,52 @@ enum { GHWCFFG4_PHY_DATA_WIDTH_8_16 = 2, // software selectable }; +enum { + HPRT_SPEED_HIGH = 0, + HPRT_SPEED_FULL = 1, + HPRT_SPEED_LOW = 2 +}; + +enum { + GINTSTS_CMODE_DEVICE = 0, + GINTSTS_CMODE_HOST = 1, +}; + +enum { + HCTSIZ_PID_DATA0 = 0, // 00b + HCTSIZ_PID_DATA2 = 1, // 01b + HCTSIZ_PID_DATA1 = 2, // 10b + HCTSIZ_PID_SETUP = 3, // 11b +}; +enum { + HCTSIZ_PID_MDATA = 3, +}; + +enum { + GRXSTS_PKTSTS_GLOBALOUTNAK = 1, + GRXSTS_PKTSTS_OUTRX = 2, + GRXSTS_PKTSTS_OUTDONE = 3, + GRXSTS_PKTSTS_SETUPDONE = 4, + GRXSTS_PKTSTS_SETUPRX = 6 +}; + +enum { + GRXSTS_PKTSTS_RX_DATA = 2, + GRXSTS_PKTSTS_RX_COMPLETE = 3, + GRXSTS_PKTSTS_HOST_DATATOGGLE_ERR = 5, + GRXSTS_PKTSTS_HOST_CHANNEL_HALTED = 7 +}; + +// Same as TUSB_XFER_* +enum { + HCCHAR_EPTYPE_CONTROL = 0, + HCCHAR_EPTYPE_ISOCHRONOUS = 1, + HCCHAR_EPTYPE_BULK = 2, + HCCHAR_EPTYPE_INTERRUPT = 3 +}; + //-------------------------------------------------------------------- -// Register bitfield definitions +// Common Register Bitfield //-------------------------------------------------------------------- typedef struct TU_ATTR_PACKED { uint32_t ses_req_scs : 1; // 0 Session request success @@ -146,7 +195,7 @@ typedef struct TU_ATTR_PACKED { uint32_t ases_valid : 1; // 18 A-session valid uint32_t bses_valid : 1; // 19 B-session valid uint32_t otg_ver : 1; // 20 OTG version 0: v1.3, 1: v2.0 - uint32_t current_mode : 1; // 21 Current mode of operation 0: device, 1: host + uint32_t current_mode : 1; // 21 Current mode of operation. Only from v3.00a uint32_t mult_val_id_bc : 5; // 22..26 Multi-valued input pin ID battery charger uint32_t chirp_en : 1; // 27 Chirp detection enable uint32_t rsv28_30 : 3; // 28.30: Reserved @@ -192,7 +241,7 @@ typedef struct TU_ATTR_PACKED { based on the speed of enumeration. The number of bit times added per PHY clock are as follows: - High-speed: PHY clock One 30-MHz = 16 bit times, One 60-MHz = 8 bit times - Full-speed: PHY clock One 30-MHz = 0.4 bit times, One 60-MHz = 0.2 bit times, One 48-MHz = 0.25 bit times */ - uint32_t phy_if : 1; // 3 PHY interface. 0: 8 bits, 1: 16 bits + uint32_t phy_if16 : 1; // 3 PHY interface. 0: 8 bits, 1: 16 bits uint32_t ulpi_utmi_sel : 1; // 4 ULPI/UTMI select. 0: UTMI+, 1: ULPI uint32_t fs_intf_sel : 1; // 5 Fullspeed serial interface select. 0: 6-pin, 1: 3-pin uint32_t phy_sel : 1; // 6 HS/FS PHY selection. 0: HS UTMI+ or ULPI, 1: FS serial transceiver @@ -241,9 +290,20 @@ typedef struct TU_ATTR_PACKED { TU_VERIFY_STATIC(sizeof(dwc2_grstctl_t) == 4, "incorrect size"); typedef struct TU_ATTR_PACKED { + uint32_t ep_ch_num : 4; // 0..3 Endpoint/Channel Number + uint32_t byte_count :11; // 4..14 Byte Count + uint32_t dpid : 2; // 15..16 Data PID + uint32_t packet_status : 4; // 17..20 Packet Status + uint32_t frame_number : 4; // 21..24 Frame Number + uint32_t rsv25_31 : 7; // 25..31 Reserved +} dwc2_grxstsp_t; +TU_VERIFY_STATIC(sizeof(dwc2_grxstsp_t) == 4, "incorrect size"); + +// Hardware Configuration +typedef struct TU_ATTR_PACKED { uint32_t op_mode : 3; // 0..2 HNP/SRP Host/Device/OTG mode uint32_t arch : 2; // 3..4 Slave/External/Internal DMA - uint32_t point2point : 1; // 5 0: support hub and split | 1: no hub, no split + uint32_t single_point : 1; // 5 0: support hub and split | 1: no hub, no split uint32_t hs_phy_type : 2; // 6..7 0: not supported | 1: UTMI+ | 2: ULPI | 3: UTMI+ and ULPI uint32_t fs_phy_type : 2; // 8..9 0: not supported | 1: dedicated | 2: UTMI+ | 3: ULPI uint32_t num_dev_ep : 4; // 10..13 Number of device endpoints (excluding EP0) @@ -301,41 +361,150 @@ typedef struct TU_ATTR_PACKED { }dwc2_ghwcfg4_t; TU_VERIFY_STATIC(sizeof(dwc2_ghwcfg4_t) == 4, "incorrect size"); +//-------------------------------------------------------------------- +// Host Register Bitfield +//-------------------------------------------------------------------- + +typedef struct TU_ATTR_PACKED { + uint32_t fifo_available : 16; // 0..15 Number of words available in the Tx FIFO + uint32_t req_queue_available : 8; // 16..23 Number of spaces available in the NPT transmit request queue for both IN and OU + // 24..31 is top entry in the request queue that is currently being processed by the MAC + uint32_t qtop_terminate : 1; // 24 Last entry for selected channel + uint32_t qtop_type : 2; // 25..26 Token (0) In/Out (1) ZLP, (2) Ping/cspit, (3) Channel halt command + uint32_t qtop_ch_num : 4; // 27..30 Channel number +} dwc2_hnptxsts_t; +TU_VERIFY_STATIC(sizeof(dwc2_hnptxsts_t) == 4, "incorrect size"); + +typedef struct TU_ATTR_PACKED { + uint32_t fifo_available : 16; // 0..15 Number of words available in the Tx FIFO + uint32_t req_queue_available : 7; // 16..22 Number of spaces available in the PTX transmit request queue + uint32_t qtop_terminate : 1; // 23 Last entry for selected channel + uint32_t qtop_last_period : 1; // 24 Last entry for selected channel is a periodic entry + uint32_t qtop_type : 2; // 25..26 Token (0) In/Out (1) ZLP, (2) Ping/cspit, (3) Channel halt command + uint32_t qtop_ch_num : 4; // 27..30 Channel number + uint32_t qtop_odd_frame : 1; // 31 Send in odd frame +} dwc2_hptxsts_t; +TU_VERIFY_STATIC(sizeof(dwc2_hptxsts_t) == 4, "incorrect size"); + +typedef struct TU_ATTR_PACKED { + uint32_t conn_status : 1; // 0 Port connect status + uint32_t conn_detected : 1; // 1 Port connect detected + uint32_t enable : 1; // 2 Port enable status + uint32_t enable_change : 1; // 3 Port enable change + uint32_t over_current_active : 1; // 4 Port Over-current active + uint32_t over_current_change : 1; // 5 Port Over-current change + uint32_t resume : 1; // 6 Port resume + uint32_t suspend : 1; // 7 Port suspend + uint32_t reset : 1; // 8 Port reset + uint32_t rsv9 : 1; // 9 Reserved + uint32_t line_status : 2; // 10..11 Line status + uint32_t power : 1; // 12 Port power + uint32_t test_control : 4; // 13..16 Port Test control + uint32_t speed : 2; // 17..18 Port speed + uint32_t rsv19_31 :13; // 19..31 Reserved +}dwc2_hprt_t; +TU_VERIFY_STATIC(sizeof(dwc2_hprt_t) == 4, "incorrect size"); + +typedef struct TU_ATTR_PACKED { + uint32_t ep_size : 11; // 0..10 Maximum packet size + uint32_t ep_num : 4; // 11..14 Endpoint number + uint32_t ep_dir : 1; // 15 Endpoint direction + uint32_t rsv16 : 1; // 16 Reserved + uint32_t low_speed_dev : 1; // 17 Low-speed device + uint32_t ep_type : 2; // 18..19 Endpoint type + uint32_t err_multi_count : 2; // 20..21 Error (splitEn = 1) / Multi (SplitEn = 0) count + uint32_t dev_addr : 7; // 22..28 Device address + uint32_t odd_frame : 1; // 29 Odd frame + uint32_t disable : 1; // 30 Channel disable + uint32_t enable : 1; // 31 Channel enable +} dwc2_channel_char_t; +TU_VERIFY_STATIC(sizeof(dwc2_channel_char_t) == 4, "incorrect size"); + +typedef struct TU_ATTR_PACKED { + uint32_t hub_port : 7; // 0..6 Hub port number + uint32_t hub_addr : 7; // 7..13 Hub address + uint32_t xact_pos : 2; // 14..15 Transaction position + uint32_t split_compl : 1; // 16 Split completion + uint32_t rsv17_30 : 14; // 17..30 Reserved + uint32_t split_en : 1; // 31 Split enable +} dwc2_channel_split_t; +TU_VERIFY_STATIC(sizeof(dwc2_channel_split_t) == 4, "incorrect size"); + +typedef struct TU_ATTR_PACKED { + uint32_t xfer_size : 19; // 0..18 Transfer size in bytes + uint32_t packet_count : 10; // 19..28 Number of packets + uint32_t pid : 2; // 29..30 Packet ID + uint32_t do_ping : 1; // 31 Do PING +} dwc2_channel_tsize_t; +TU_VERIFY_STATIC(sizeof(dwc2_channel_tsize_t) == 4, "incorrect size"); + +typedef struct TU_ATTR_PACKED { + uint32_t num : 16; // 0..15 Frame number + uint32_t remainning : 16; // 16..31 Frame remaining +} dwc2_hfnum_t; +TU_VERIFY_STATIC(sizeof(dwc2_hfnum_t) == 4, "incorrect size"); + // Host Channel typedef struct { - volatile uint32_t hcchar; // 500 + 20*ch Host Channel Characteristics - volatile uint32_t hcsplt; // 504 + 20*ch Host Channel Split Control - volatile uint32_t hcint; // 508 + 20*ch Host Channel Interrupt - volatile uint32_t hcintmsk; // 50C + 20*ch Host Channel Interrupt Mask - volatile uint32_t hctsiz; // 510 + 20*ch Host Channel Transfer Size - volatile uint32_t hcdma; // 514 + 20*ch Host Channel DMA Address - uint32_t reserved518; // 518 + 20*ch - volatile uint32_t hcdmab; // 51C + 20*ch Host Channel DMA Address + union { + volatile uint32_t hcchar; // 500 + 20*ch Host Channel Characteristics + volatile dwc2_channel_char_t hcchar_bm; + }; + union { + volatile uint32_t hcsplt; // 504 + 20*ch Host Channel Split Control + volatile dwc2_channel_split_t hcsplt_bm; + }; + volatile uint32_t hcint; // 508 + 20*ch Host Channel Interrupt + volatile uint32_t hcintmsk; // 50C + 20*ch Host Channel Interrupt Mask + union { + volatile uint32_t hctsiz; // 510 + 20*ch Host Channel Transfer Size + volatile dwc2_channel_tsize_t hctsiz_bm; + }; + volatile uint32_t hcdma; // 514 + 20*ch Host Channel DMA Address + uint32_t reserved518; // 518 + 20*ch + volatile uint32_t hcdmab; // 51C + 20*ch Host Channel DMA Address } dwc2_channel_t; +//-------------------------------------------------------------------- +// Device Register Bitfield +//-------------------------------------------------------------------- +typedef struct TU_ATTR_PACKED { + uint32_t xfer_size : 19; // 0..18 Transfer size in bytes + uint32_t packet_count : 10; // 19..28 Number of packets + uint32_t mc_pid : 2; // 29..30 IN: Multi Count, OUT: PID +} dwc2_ep_tsize_t; +TU_VERIFY_STATIC(sizeof(dwc2_ep_tsize_t) == 4, "incorrect size"); + // Endpoint IN typedef struct { - volatile uint32_t diepctl; // 900 + 20*ep Device IN Endpoint Control - uint32_t reserved04; // 904 - volatile uint32_t diepint; // 908 + 20*ep Device IN Endpoint Interrupt - uint32_t reserved0c; // 90C - volatile uint32_t dieptsiz; // 910 + 20*ep Device IN Endpoint Transfer Size - volatile uint32_t diepdma; // 914 + 20*ep Device IN Endpoint DMA Address - volatile uint32_t dtxfsts; // 918 + 20*ep Device IN Endpoint Tx FIFO Status - uint32_t reserved1c; // 91C + volatile uint32_t diepctl; // 900 + 20*ep Device IN Endpoint Control + uint32_t reserved04; // 904 + volatile uint32_t diepint; // 908 + 20*ep Device IN Endpoint Interrupt + uint32_t reserved0c; // 90C + union { + volatile uint32_t dieptsiz; // 910 + 20*ep Device IN Endpoint Transfer Size + volatile dwc2_ep_tsize_t dieptsiz_bm; + }; + volatile uint32_t diepdma; // 914 + 20*ep Device IN Endpoint DMA Address + volatile uint32_t dtxfsts; // 918 + 20*ep Device IN Endpoint Tx FIFO Status + uint32_t reserved1c; // 91C } dwc2_epin_t; // Endpoint OUT typedef struct { - volatile uint32_t doepctl; // B00 + 20*ep Device OUT Endpoint Control - uint32_t reserved04; // B04 - volatile uint32_t doepint; // B08 + 20*ep Device OUT Endpoint Interrupt - uint32_t reserved0c; // B0C - volatile uint32_t doeptsiz; // B10 + 20*ep Device OUT Endpoint Transfer Size - volatile uint32_t doepdma; // B14 + 20*ep Device OUT Endpoint DMA Address - uint32_t reserved18[2]; // B18..B1C + volatile uint32_t doepctl; // B00 + 20*ep Device OUT Endpoint Control + uint32_t reserved04; // B04 + volatile uint32_t doepint; // B08 + 20*ep Device OUT Endpoint Interrupt + uint32_t reserved0c; // B0C + union { + volatile uint32_t doeptsiz; // B10 + 20*ep Device OUT Endpoint Transfer Size + volatile dwc2_ep_tsize_t doeptsiz_bm; + }; + volatile uint32_t doepdma; // B14 + 20*ep Device OUT Endpoint DMA Address + uint32_t reserved18[2]; // B18..B1C } dwc2_epout_t; +// Universal Endpoint typedef struct { union { volatile uint32_t diepctl; @@ -351,6 +520,7 @@ typedef struct { union { volatile uint32_t dieptsiz; volatile uint32_t doeptsiz; + volatile dwc2_ep_tsize_t deptsiz_bm; }; union { volatile uint32_t diepdma; @@ -367,21 +537,43 @@ TU_VERIFY_STATIC(sizeof(dwc2_dep_t) == 0x20, "incorrect size"); //-------------------------------------------------------------------- typedef struct { //------------- Core Global -------------// + union { volatile uint32_t gotgctl; // 000 OTG Control and Status + volatile dwc2_gotgctl_t gotgctl_bm; + }; + union { volatile uint32_t gotgint; // 004 OTG Interrupt + volatile dwc2_gotgint_t gotgint_bm; + }; + union { volatile uint32_t gahbcfg; // 008 AHB Configuration + volatile dwc2_gahbcfg_t gahbcfg_bm; + }; + union { volatile uint32_t gusbcfg; // 00c USB Configuration + volatile dwc2_gusbcfg_t gusbcfg_bm; + }; + union { volatile uint32_t grstctl; // 010 Reset + volatile dwc2_grstctl_t grstctl_bm; + }; volatile uint32_t gintsts; // 014 Interrupt volatile uint32_t gintmsk; // 018 Interrupt Mask volatile uint32_t grxstsr; // 01c Receive Status Debug Read + union { volatile uint32_t grxstsp; // 020 Receive Status Read/Pop + volatile dwc2_grxstsp_t grxstsp_bm; + }; volatile uint32_t grxfsiz; // 024 Receive FIFO Size union { volatile uint32_t dieptxf0; // 028 EP0 Tx FIFO Size volatile uint32_t gnptxfsiz; // 028 Non-periodic Transmit FIFO Size }; - volatile uint32_t gnptxsts; // 02c Non-periodic Transmit FIFO/Queue Status + union { + volatile uint32_t hnptxsts; // 02c Non-periodic Transmit FIFO/Queue Status + volatile dwc2_hnptxsts_t hnptxsts_bm; + volatile uint32_t gnptxsts; + }; volatile uint32_t gi2cctl; // 030 I2C Address volatile uint32_t gpvndctl; // 034 PHY Vendor Control union { @@ -415,14 +607,23 @@ typedef struct { //------------ Host -------------// volatile uint32_t hcfg; // 400 Host Configuration volatile uint32_t hfir; // 404 Host Frame Interval + union { volatile uint32_t hfnum; // 408 Host Frame Number / Frame Remaining + volatile dwc2_hfnum_t hfnum_bm; + }; uint32_t reserved40c; // 40C + union { volatile uint32_t hptxsts; // 410 Host Periodic TX FIFO / Queue Status + volatile dwc2_hptxsts_t hptxsts_bm; + }; volatile uint32_t haint; // 414 Host All Channels Interrupt volatile uint32_t haintmsk; // 418 Host All Channels Interrupt Mask volatile uint32_t hflbaddr; // 41C Host Frame List Base Address uint32_t reserved420[8]; // 420..43F + union { volatile uint32_t hprt; // 440 Host Port Control and Status + volatile dwc2_hprt_t hprt_bm; + }; uint32_t reserved444[47]; // 444..4FF //------------- Host Channel -------------// @@ -464,8 +665,8 @@ typedef struct { uint32_t reservedd00[64]; // D00..DFF //------------- Power Clock -------------// - volatile uint32_t pcgctl; // E00 Power and Clock Gating Control - volatile uint32_t pcgctl1; // E04 + volatile uint32_t pcgcctl; // E00 Power and Clock Gating Characteristic Control + volatile uint32_t pcgcctl1; // E04 Power and Clock Gating Characteristic Control 1 uint32_t reservede08[126]; // E08..FFF //------------- FIFOs -------------// @@ -478,7 +679,7 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, channel) == 0x0500, "incorrect size"); TU_VERIFY_STATIC(offsetof(dwc2_regs_t, dcfg ) == 0x0800, "incorrect size"); TU_VERIFY_STATIC(offsetof(dwc2_regs_t, epin ) == 0x0900, "incorrect size"); TU_VERIFY_STATIC(offsetof(dwc2_regs_t, epout ) == 0x0B00, "incorrect size"); -TU_VERIFY_STATIC(offsetof(dwc2_regs_t, pcgctl ) == 0x0E00, "incorrect size"); +TU_VERIFY_STATIC(offsetof(dwc2_regs_t, pcgcctl) == 0x0E00, "incorrect size"); TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); //--------------------------------------------------------------------+ @@ -542,14 +743,16 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define GOTGCTL_OTGVER GOTGCTL_OTGVER_Msk // OTG version /******************** Bit definition for HCFG register ********************/ -#define HCFG_FSLSPCS_Pos (0U) -#define HCFG_FSLSPCS_Msk (0x3UL << HCFG_FSLSPCS_Pos) // 0x00000003 -#define HCFG_FSLSPCS HCFG_FSLSPCS_Msk // FS/LS PHY clock select -#define HCFG_FSLSPCS_0 (0x1UL << HCFG_FSLSPCS_Pos) // 0x00000001 -#define HCFG_FSLSPCS_1 (0x2UL << HCFG_FSLSPCS_Pos) // 0x00000002 -#define HCFG_FSLSS_Pos (2U) -#define HCFG_FSLSS_Msk (0x1UL << HCFG_FSLSS_Pos) // 0x00000004 -#define HCFG_FSLSS HCFG_FSLSS_Msk // FS- and LS-only support +#define HCFG_FSLS_PHYCLK_SEL_Pos (0U) +#define HCFG_FSLS_PHYCLK_SEL_Msk (0x3UL << HCFG_FSLS_PHYCLK_SEL_Pos) // 0x00000003 +#define HCFG_FSLS_PHYCLK_SEL HCFG_FSLS_PHYCLK_SEL_Msk // FS/LS PHY clock select +#define HCFG_FSLS_PHYCLK_SEL_30_60MHZ (0x0UL << HCFG_FSLS_PHYCLK_SEL_Pos) // 0x00000000 +#define HCFG_FSLS_PHYCLK_SEL_48MHZ (0x1UL << HCFG_FSLS_PHYCLK_SEL_Pos) // 0x00000001 +#define HCFG_FSLS_PHYCLK_SEL_6MHZ (0x2UL << HCFG_FSLS_PHYCLK_SEL_Pos) // 0x00000002 + +#define HCFG_FSLS_ONLY_Pos (2U) +#define HCFG_FSLS_ONLY_Msk (0x1UL << HCFG_FSLS_ONLY_Pos) // 0x00000004 +#define HCFG_FSLS_ONLY HCFG_FSLS_ONLY_Msk // FS- and LS-only support /******************** Bit definition for PCGCR register ********************/ #define PCGCR_STPPCLK_Pos (0U) @@ -664,6 +867,9 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define HFIR_FRIVL_Pos (0U) #define HFIR_FRIVL_Msk (0xFFFFUL << HFIR_FRIVL_Pos) // 0x0000FFFF #define HFIR_FRIVL HFIR_FRIVL_Msk // Frame interval +#define HFIR_RELOAD_CTRL_Pos (16U) // available since v2.92a +#define HFIR_RELOAD_CTRL_Msk (0x1UL << HFIR_RELOAD_CTRL_Pos) +#define HFIR_RELOAD_CTRL HFIR_RELOAD_CTRL_Msk /******************** Bit definition for HFNUM register ********************/ #define HFNUM_FRNUM_Pos (0U) @@ -708,19 +914,17 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define GAHBCFG_DMAEN_Pos (5U) #define GAHBCFG_DMAEN_Msk (0x1UL << GAHBCFG_DMAEN_Pos) // 0x00000020 #define GAHBCFG_DMAEN GAHBCFG_DMAEN_Msk // DMA enable -#define GAHBCFG_TXFELVL_Pos (7U) -#define GAHBCFG_TXFELVL_Msk (0x1UL << GAHBCFG_TXFELVL_Pos) // 0x00000080 -#define GAHBCFG_TXFELVL GAHBCFG_TXFELVL_Msk // TxFIFO empty level -#define GAHBCFG_PTXFELVL_Pos (8U) -#define GAHBCFG_PTXFELVL_Msk (0x1UL << GAHBCFG_PTXFELVL_Pos) // 0x00000100 -#define GAHBCFG_PTXFELVL GAHBCFG_PTXFELVL_Msk // Periodic TxFIFO empty level - -#define GSNPSID_ID_MASK TU_GENMASK(31, 16) +#define GAHBCFG_TX_FIFO_EPMTY_LVL_Pos (7U) +#define GAHBCFG_TX_FIFO_EPMTY_LVL_Msk (0x1UL << GAHBCFG_TX_FIFO_EPMTY_LVL_Pos) // 0x00000080 +#define GAHBCFG_TX_FIFO_EPMTY_LVL GAHBCFG_TX_FIFO_EPMTY_LVL_Msk // TxFIFO empty level +#define GAHBCFG_PTX_FIFO_EPMTY_LVL_Pos (8U) +#define GAHBCFG_PTX_FIFO_EPMTY_LVL_Msk (0x1UL << GAHBCFG_PTX_FIFO_EPMTY_LVL_Pos) // 0x00000100 +#define GAHBCFG_PTX_FIFO_EPMTY_LVL GAHBCFG_PTX_FIFO_EPMTY_LVL_Msk // Periodic TxFIFO empty level /******************** Bit definition for GUSBCFG register ********************/ #define GUSBCFG_TOCAL_Pos (0U) #define GUSBCFG_TOCAL_Msk (0x7UL << GUSBCFG_TOCAL_Pos) // 0x00000007 -#define GUSBCFG_TOCAL GUSBCFG_TOCAL_Msk // FS timeout calibration +#define GUSBCFG_TOCAL GUSBCFG_TOCAL_Msk // HS/FS timeout calibration #define GUSBCFG_PHYIF16_Pos (3U) #define GUSBCFG_PHYIF16_Msk (0x1UL << GUSBCFG_PHYIF16_Pos) // 0x00000008 #define GUSBCFG_PHYIF16 GUSBCFG_PHYIF16_Msk // PHY Interface (PHYIf) @@ -804,8 +1008,8 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define GRSTCTL_TXFNUM_2 (0x04UL << GRSTCTL_TXFNUM_Pos) // 0x00000100 #define GRSTCTL_TXFNUM_3 (0x08UL << GRSTCTL_TXFNUM_Pos) // 0x00000200 #define GRSTCTL_TXFNUM_4 (0x10UL << GRSTCTL_TXFNUM_Pos) // 0x00000400 -#define GRSTCTL_CSFTRST_DONE_Pos (29) -#define GRSTCTL_CSFTRST_DONE (1u << GRSTCTL_CSFTRST_DONE_Pos) // Reset Done, only available from v4.20a +#define GRSTCTL_CSRST_DONE_Pos (29) +#define GRSTCTL_CSRST_DONE (1u << GRSTCTL_CSRST_DONE_Pos) // Reset Done, only available from v4.20a #define GRSTCTL_DMAREQ_Pos (30U) #define GRSTCTL_DMAREQ_Msk (0x1UL << GRSTCTL_DMAREQ_Pos) // 0x40000000 #define GRSTCTL_DMAREQ GRSTCTL_DMAREQ_Msk // DMA request signal @@ -926,9 +1130,9 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define GINTSTS_RXFLVL_Pos (4U) #define GINTSTS_RXFLVL_Msk (0x1UL << GINTSTS_RXFLVL_Pos) // 0x00000010 #define GINTSTS_RXFLVL GINTSTS_RXFLVL_Msk // RxFIFO nonempty -#define GINTSTS_NPTXFE_Pos (5U) -#define GINTSTS_NPTXFE_Msk (0x1UL << GINTSTS_NPTXFE_Pos) // 0x00000020 -#define GINTSTS_NPTXFE GINTSTS_NPTXFE_Msk // Nonperiodic TxFIFO empty +#define GINTSTS_NPTX_FIFO_EMPTY_Pos (5U) +#define GINTSTS_NPTX_FIFO_EMPTY_Msk (0x1UL << GINTSTS_NPTX_FIFO_EMPTY_Pos) // 0x00000020 +#define GINTSTS_NPTX_FIFO_EMPTY GINTSTS_NPTX_FIFO_EMPTY_Msk // Nonperiodic TxFIFO empty #define GINTSTS_GINAKEFF_Pos (6U) #define GINTSTS_GINAKEFF_Msk (0x1UL << GINTSTS_GINAKEFF_Pos) // 0x00000040 #define GINTSTS_GINAKEFF GINTSTS_GINAKEFF_Msk // Global IN nonperiodic NAK effective @@ -977,15 +1181,15 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define GINTSTS_HCINT_Pos (25U) #define GINTSTS_HCINT_Msk (0x1UL << GINTSTS_HCINT_Pos) // 0x02000000 #define GINTSTS_HCINT GINTSTS_HCINT_Msk // Host channels interrupt -#define GINTSTS_PTXFE_Pos (26U) -#define GINTSTS_PTXFE_Msk (0x1UL << GINTSTS_PTXFE_Pos) // 0x04000000 -#define GINTSTS_PTXFE GINTSTS_PTXFE_Msk // Periodic TxFIFO empty +#define GINTSTS_PTX_FIFO_EMPTY_Pos (26U) +#define GINTSTS_PTX_FIFO_EMPTY_Msk (0x1UL << GINTSTS_PTX_FIFO_EMPTY_Pos) // 0x04000000 +#define GINTSTS_PTX_FIFO_EMPTY GINTSTS_PTX_FIFO_EMPTY_Msk // Periodic TxFIFO empty #define GINTSTS_LPMINT_Pos (27U) #define GINTSTS_LPMINT_Msk (0x1UL << GINTSTS_LPMINT_Pos) // 0x08000000 #define GINTSTS_LPMINT GINTSTS_LPMINT_Msk // LPM interrupt -#define GINTSTS_CIDSCHG_Pos (28U) -#define GINTSTS_CIDSCHG_Msk (0x1UL << GINTSTS_CIDSCHG_Pos) // 0x10000000 -#define GINTSTS_CIDSCHG GINTSTS_CIDSCHG_Msk // Connector ID status change +#define GINTSTS_CONIDSTSCHNG_Pos (28U) +#define GINTSTS_CONIDSTSCHNG_Msk (0x1UL << GINTSTS_CONIDSTSCHNG_Pos) // 0x10000000 +#define GINTSTS_CONIDSTSCHNG GINTSTS_CONIDSTSCHNG_Msk // Connector ID status change #define GINTSTS_DISCINT_Pos (29U) #define GINTSTS_DISCINT_Msk (0x1UL << GINTSTS_DISCINT_Pos) // 0x20000000 #define GINTSTS_DISCINT GINTSTS_DISCINT_Msk // Disconnect detected interrupt @@ -1069,9 +1273,9 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define GINTMSK_LPMINTM_Pos (27U) #define GINTMSK_LPMINTM_Msk (0x1UL << GINTMSK_LPMINTM_Pos) // 0x08000000 #define GINTMSK_LPMINTM GINTMSK_LPMINTM_Msk // LPM interrupt Mask -#define GINTMSK_CIDSCHGM_Pos (28U) -#define GINTMSK_CIDSCHGM_Msk (0x1UL << GINTMSK_CIDSCHGM_Pos) // 0x10000000 -#define GINTMSK_CIDSCHGM GINTMSK_CIDSCHGM_Msk // Connector ID status change mask +#define GINTMSK_CONIDSTSCHNGM_Pos (28U) +#define GINTMSK_CONIDSTSCHNGM_Msk (0x1UL << GINTMSK_CONIDSTSCHNGM_Pos) // 0x10000000 +#define GINTMSK_CONIDSTSCHNGM GINTMSK_CONIDSTSCHNGM_Msk // Connector ID status change mask #define GINTMSK_DISCINT_Pos (29U) #define GINTMSK_DISCINT_Msk (0x1UL << GINTMSK_DISCINT_Pos) // 0x20000000 #define GINTMSK_DISCINT GINTMSK_DISCINT_Msk // Disconnect detected interrupt mask @@ -1109,17 +1313,6 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define GRXSTSP_PKTSTS_Msk (0xFUL << GRXSTSP_PKTSTS_Pos) // 0x001E0000 #define GRXSTSP_PKTSTS GRXSTSP_PKTSTS_Msk // OUT EP interrupt mask bits -#define GRXSTS_PKTSTS_GLOBALOUTNAK 1 -#define GRXSTS_PKTSTS_OUTRX 2 -#define GRXSTS_PKTSTS_HCHIN 2 -#define GRXSTS_PKTSTS_OUTDONE 3 -#define GRXSTS_PKTSTS_HCHIN_XFER_COMP 3 -#define GRXSTS_PKTSTS_SETUPDONE 4 -#define GRXSTS_PKTSTS_DATATOGGLEERR 5 -#define GRXSTS_PKTSTS_SETUPRX 6 -#define GRXSTS_PKTSTS_HCHHALTED 7 - - /******************** Bit definition for DAINTMSK register ********************/ #define DAINTMSK_IEPM_Pos (0U) #define DAINTMSK_IEPM_Msk (0xFFFFUL << DAINTMSK_IEPM_Pos) // 0x0000FFFF @@ -1448,56 +1641,53 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define DIEPEACHMSK1_NAKM DIEPEACHMSK1_NAKM_Msk // NAK interrupt mask /******************** Bit definition for HPRT register ********************/ -#define HPRT_PCSTS_Pos (0U) -#define HPRT_PCSTS_Msk (0x1UL << HPRT_PCSTS_Pos) // 0x00000001 -#define HPRT_PCSTS HPRT_PCSTS_Msk // Port connect status -#define HPRT_PCDET_Pos (1U) -#define HPRT_PCDET_Msk (0x1UL << HPRT_PCDET_Pos) // 0x00000002 -#define HPRT_PCDET HPRT_PCDET_Msk // Port connect detected -#define HPRT_PENA_Pos (2U) -#define HPRT_PENA_Msk (0x1UL << HPRT_PENA_Pos) // 0x00000004 -#define HPRT_PENA HPRT_PENA_Msk // Port enable -#define HPRT_PENCHNG_Pos (3U) -#define HPRT_PENCHNG_Msk (0x1UL << HPRT_PENCHNG_Pos) // 0x00000008 -#define HPRT_PENCHNG HPRT_PENCHNG_Msk // Port enable/disable change -#define HPRT_POCA_Pos (4U) -#define HPRT_POCA_Msk (0x1UL << HPRT_POCA_Pos) // 0x00000010 -#define HPRT_POCA HPRT_POCA_Msk // Port overcurrent active -#define HPRT_POCCHNG_Pos (5U) -#define HPRT_POCCHNG_Msk (0x1UL << HPRT_POCCHNG_Pos) // 0x00000020 -#define HPRT_POCCHNG HPRT_POCCHNG_Msk // Port overcurrent change -#define HPRT_PRES_Pos (6U) -#define HPRT_PRES_Msk (0x1UL << HPRT_PRES_Pos) // 0x00000040 -#define HPRT_PRES HPRT_PRES_Msk // Port resume -#define HPRT_PSUSP_Pos (7U) -#define HPRT_PSUSP_Msk (0x1UL << HPRT_PSUSP_Pos) // 0x00000080 -#define HPRT_PSUSP HPRT_PSUSP_Msk // Port suspend -#define HPRT_PRST_Pos (8U) -#define HPRT_PRST_Msk (0x1UL << HPRT_PRST_Pos) // 0x00000100 -#define HPRT_PRST HPRT_PRST_Msk // Port reset - -#define HPRT_PLSTS_Pos (10U) -#define HPRT_PLSTS_Msk (0x3UL << HPRT_PLSTS_Pos) // 0x00000C00 -#define HPRT_PLSTS HPRT_PLSTS_Msk // Port line status -#define HPRT_PLSTS_0 (0x1UL << HPRT_PLSTS_Pos) // 0x00000400 -#define HPRT_PLSTS_1 (0x2UL << HPRT_PLSTS_Pos) // 0x00000800 -#define HPRT_PPWR_Pos (12U) -#define HPRT_PPWR_Msk (0x1UL << HPRT_PPWR_Pos) // 0x00001000 -#define HPRT_PPWR HPRT_PPWR_Msk // Port power - -#define HPRT_PTCTL_Pos (13U) -#define HPRT_PTCTL_Msk (0xFUL << HPRT_PTCTL_Pos) // 0x0001E000 -#define HPRT_PTCTL HPRT_PTCTL_Msk // Port test control -#define HPRT_PTCTL_0 (0x1UL << HPRT_PTCTL_Pos) // 0x00002000 -#define HPRT_PTCTL_1 (0x2UL << HPRT_PTCTL_Pos) // 0x00004000 -#define HPRT_PTCTL_2 (0x4UL << HPRT_PTCTL_Pos) // 0x00008000 -#define HPRT_PTCTL_3 (0x8UL << HPRT_PTCTL_Pos) // 0x00010000 - -#define HPRT_PSPD_Pos (17U) -#define HPRT_PSPD_Msk (0x3UL << HPRT_PSPD_Pos) // 0x00060000 -#define HPRT_PSPD HPRT_PSPD_Msk // Port speed -#define HPRT_PSPD_0 (0x1UL << HPRT_PSPD_Pos) // 0x00020000 -#define HPRT_PSPD_1 (0x2UL << HPRT_PSPD_Pos) // 0x00040000 +#define HPRT_CONN_STATUS_Pos (0U) +#define HPRT_CONN_STATUS_Msk (0x1UL << HPRT_CONN_STATUS_Pos) // 0x00000001 +#define HPRT_CONN_STATUS HPRT_CONN_STATUS_Msk // Port connect status +#define HPRT_CONN_DETECT_Pos (1U) +#define HPRT_CONN_DETECT_Msk (0x1UL << HPRT_CONN_DETECT_Pos) // 0x00000002 +#define HPRT_CONN_DETECT HPRT_CONN_DETECT_Msk // Port connect detected +#define HPRT_ENABLE_Pos (2U) +#define HPRT_ENABLE_Msk (0x1UL << HPRT_ENABLE_Pos) // 0x00000004 +#define HPRT_ENABLE HPRT_ENABLE_Msk // Port enable +#define HPRT_ENABLE_CHANGE_Pos (3U) +#define HPRT_ENABLE_CHANGE_Msk (0x1UL << HPRT_ENABLE_CHANGE_Pos) // 0x00000008 +#define HPRT_ENABLE_CHANGE HPRT_ENABLE_CHANGE_Msk // Port enable/disable change +#define HPRT_OVER_CURRENT_ACTIVE_Pos (4U) +#define HPRT_OVER_CURRENT_ACTIVE_Msk (0x1UL << HPRT_OVER_CURRENT_ACTIVE_Pos) // 0x00000010 +#define HPRT_OVER_CURRENT_ACTIVE HPRT_OVER_CURRENT_ACTIVE_Msk // Port overcurrent active +#define HPRT_OVER_CURRENT_CHANGE_Pos (5U) +#define HPRT_OVER_CURRENT_CHANGE_Msk (0x1UL << HPRT_OVER_CURRENT_CHANGE_Pos) // 0x00000020 +#define HPRT_OVER_CURRENT_CHANGE HPRT_OVER_CURRENT_CHANGE_Msk // Port overcurrent change +#define HPRT_RESUME_Pos (6U) +#define HPRT_RESUME_Msk (0x1UL << HPRT_RESUME_Pos) // 0x00000040 +#define HPRT_RESUME HPRT_RESUME_Msk // Port resume +#define HPRT_SUSPEND_Pos (7U) +#define HPRT_SUSPEND_Msk (0x1UL << HPRT_SUSPEND_Pos) // 0x00000080 +#define HPRT_SUSPEND HPRT_SUSPEND_Msk // Port suspend +#define HPRT_RESET_Pos (8U) +#define HPRT_RESET_Msk (0x1UL << HPRT_RESET_Pos) // 0x00000100 +#define HPRT_RESET HPRT_RESET_Msk // Port reset +#define HPRT_LINE_STATUS_Pos (10U) +#define HPRT_LINE_STATUS_Msk (0x3UL << HPRT_LINE_STATUS_Pos) // 0x00000C00 +#define HPRT_LINE_STATUS HPRT_LINE_STATUS_Msk // Port line status +#define HPRT_LINE_STATUS_0 (0x1UL << HPRT_LINE_STATUS_Pos) // 0x00000400 +#define HPRT_LINE_STATUS_1 (0x2UL << HPRT_LINE_STATUS_Pos) // 0x00000800 +#define HPRT_POWER_Pos (12U) +#define HPRT_POWER_Msk (0x1UL << HPRT_POWER_Pos) // 0x00001000 +#define HPRT_POWER HPRT_POWER_Msk // Port power +#define HPRT_TEST_CONTROL_Pos (13U) +#define HPRT_TEST_CONTROL_Msk (0xFUL << HPRT_TEST_CONTROL_Pos) // 0x0001E000 +#define HPRT_TEST_CONTROL HPRT_TEST_CONTROL_Msk // Port test control +#define HPRT_TEST_CONTROL_0 (0x1UL << HPRT_TEST_CONTROL_Pos) // 0x00002000 +#define HPRT_TEST_CONTROL_1 (0x2UL << HPRT_TEST_CONTROL_Pos) // 0x00004000 +#define HPRT_TEST_CONTROL_2 (0x4UL << HPRT_TEST_CONTROL_Pos) // 0x00008000 +#define HPRT_TEST_CONTROL_3 (0x8UL << HPRT_TEST_CONTROL_Pos) // 0x00010000 +#define HPRT_SPEED_Pos (17U) +#define HPRT_SPEED_Msk (0x3UL << HPRT_SPEED_Pos) // 0x00060000 +#define HPRT_SPEED HPRT_SPEED_Msk // Port speed +#define HPRT_SPEED_0 (0x1UL << HPRT_SPEED_Pos) // 0x00020000 +#define HPRT_SPEED_1 (0x2UL << HPRT_SPEED_Pos) // 0x00040000 /******************** Bit definition for DOEPEACHMSK1 register ********************/ #define DOEPEACHMSK1_XFRCM_Pos (0U) @@ -1679,15 +1869,15 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define HCSPLT_SPLITEN HCSPLT_SPLITEN_Msk // Split enable /******************** Bit definition for HCINT register ********************/ -#define HCINT_XFRC_Pos (0U) -#define HCINT_XFRC_Msk (0x1UL << HCINT_XFRC_Pos) // 0x00000001 -#define HCINT_XFRC HCINT_XFRC_Msk // Transfer completed -#define HCINT_CHH_Pos (1U) -#define HCINT_CHH_Msk (0x1UL << HCINT_CHH_Pos) // 0x00000002 -#define HCINT_CHH HCINT_CHH_Msk // Channel halted -#define HCINT_AHBERR_Pos (2U) -#define HCINT_AHBERR_Msk (0x1UL << HCINT_AHBERR_Pos) // 0x00000004 -#define HCINT_AHBERR HCINT_AHBERR_Msk // AHB error +#define HCINT_XFER_COMPLETE_Pos (0U) +#define HCINT_XFER_COMPLETE_Msk (0x1UL << HCINT_XFER_COMPLETE_Pos) // 0x00000001 +#define HCINT_XFER_COMPLETE HCINT_XFER_COMPLETE_Msk // Transfer completed +#define HCINT_HALTED_Pos (1U) +#define HCINT_HALTED_Msk (0x1UL << HCINT_HALTED_Pos) // 0x00000002 +#define HCINT_HALTED HCINT_HALTED_Msk // Channel halted +#define HCINT_AHB_ERR_Pos (2U) +#define HCINT_AHB_ERR_Msk (0x1UL << HCINT_AHB_ERR_Pos) // 0x00000004 +#define HCINT_AHB_ERR HCINT_AHB_ERR_Msk // AHB error #define HCINT_STALL_Pos (3U) #define HCINT_STALL_Msk (0x1UL << HCINT_STALL_Pos) // 0x00000008 #define HCINT_STALL HCINT_STALL_Msk // STALL response received interrupt @@ -1700,18 +1890,27 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define HCINT_NYET_Pos (6U) #define HCINT_NYET_Msk (0x1UL << HCINT_NYET_Pos) // 0x00000040 #define HCINT_NYET HCINT_NYET_Msk // Response received interrupt -#define HCINT_TXERR_Pos (7U) -#define HCINT_TXERR_Msk (0x1UL << HCINT_TXERR_Pos) // 0x00000080 -#define HCINT_TXERR HCINT_TXERR_Msk // Transaction error -#define HCINT_BBERR_Pos (8U) -#define HCINT_BBERR_Msk (0x1UL << HCINT_BBERR_Pos) // 0x00000100 -#define HCINT_BBERR HCINT_BBERR_Msk // Babble error -#define HCINT_FRMOR_Pos (9U) -#define HCINT_FRMOR_Msk (0x1UL << HCINT_FRMOR_Pos) // 0x00000200 -#define HCINT_FRMOR HCINT_FRMOR_Msk // Frame overrun -#define HCINT_DTERR_Pos (10U) -#define HCINT_DTERR_Msk (0x1UL << HCINT_DTERR_Pos) // 0x00000400 -#define HCINT_DTERR HCINT_DTERR_Msk // Data toggle error +#define HCINT_XACT_ERR_Pos (7U) +#define HCINT_XACT_ERR_Msk (0x1UL << HCINT_XACT_ERR_Pos) // 0x00000080 +#define HCINT_XACT_ERR HCINT_XACT_ERR_Msk // Transaction error +#define HCINT_BABBLE_ERR_Pos (8U) +#define HCINT_BABBLE_ERR_Msk (0x1UL << HCINT_BABBLE_ERR_Pos) // 0x00000100 +#define HCINT_BABBLE_ERR HCINT_BABBLE_ERR_Msk // Babble error +#define HCINT_FARME_OVERRUN_Pos (9U) +#define HCINT_FARME_OVERRUN_Msk (0x1UL << HCINT_FARME_OVERRUN_Pos) // 0x00000200 +#define HCINT_FARME_OVERRUN HCINT_FARME_OVERRUN_Msk // Frame overrun +#define HCINT_DATATOGGLE_ERR_Pos (10U) +#define HCINT_DATATOGGLE_ERR_Msk (0x1UL << HCINT_DATATOGGLE_ERR_Pos) // 0x00000400 +#define HCINT_DATATOGGLE_ERR HCINT_DATATOGGLE_ERR_Msk // Data toggle error +#define HCINT_BUFFER_NA_Pos (11U) +#define HCINT_BUFFER_NA_Msk (0x1UL << HCINT_BUFFER_NA_Pos) // 0x00000800 +#define HCINT_BUFFER_NA HCINT_BUFFER_NA_Msk // Buffer not available interrupt +#define HCINT_XCS_XACT_ERR_Pos (12U) +#define HCINT_XCS_XACT_ERR_Msk (0x1UL << HCINT_XCS_XACT_ERR_Pos) // 0x00001000 +#define HCINT_XCS_XACT_ERR HCINT_XCS_XACT_ERR_Msk // Excessive transaction error +#define HCINT_DESC_ROLLOVER_Pos (13U) +#define HCINT_DESC_ROLLOVER_Msk (0x1UL << HCINT_DESC_ROLLOVER_Pos) // 0x00002000 +#define HCINT_DESC_ROLLOVER HCINT_DESC_ROLLOVER_Msk // Descriptor rollover /******************** Bit definition for DIEPINT register ********************/ #define DIEPINT_XFRC_Pos (0U) @@ -1754,41 +1953,6 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define DIEPINT_NAK_Msk (0x1UL << DIEPINT_NAK_Pos) // 0x00002000 #define DIEPINT_NAK DIEPINT_NAK_Msk // NAK interrupt -/******************** Bit definition for HCINTMSK register ********************/ -#define HCINTMSK_XFRCM_Pos (0U) -#define HCINTMSK_XFRCM_Msk (0x1UL << HCINTMSK_XFRCM_Pos) // 0x00000001 -#define HCINTMSK_XFRCM HCINTMSK_XFRCM_Msk // Transfer completed mask -#define HCINTMSK_CHHM_Pos (1U) -#define HCINTMSK_CHHM_Msk (0x1UL << HCINTMSK_CHHM_Pos) // 0x00000002 -#define HCINTMSK_CHHM HCINTMSK_CHHM_Msk // Channel halted mask -#define HCINTMSK_AHBERR_Pos (2U) -#define HCINTMSK_AHBERR_Msk (0x1UL << HCINTMSK_AHBERR_Pos) // 0x00000004 -#define HCINTMSK_AHBERR HCINTMSK_AHBERR_Msk // AHB error -#define HCINTMSK_STALLM_Pos (3U) -#define HCINTMSK_STALLM_Msk (0x1UL << HCINTMSK_STALLM_Pos) // 0x00000008 -#define HCINTMSK_STALLM HCINTMSK_STALLM_Msk // STALL response received interrupt mask -#define HCINTMSK_NAKM_Pos (4U) -#define HCINTMSK_NAKM_Msk (0x1UL << HCINTMSK_NAKM_Pos) // 0x00000010 -#define HCINTMSK_NAKM HCINTMSK_NAKM_Msk // NAK response received interrupt mask -#define HCINTMSK_ACKM_Pos (5U) -#define HCINTMSK_ACKM_Msk (0x1UL << HCINTMSK_ACKM_Pos) // 0x00000020 -#define HCINTMSK_ACKM HCINTMSK_ACKM_Msk // ACK response received/transmitted interrupt mask -#define HCINTMSK_NYET_Pos (6U) -#define HCINTMSK_NYET_Msk (0x1UL << HCINTMSK_NYET_Pos) // 0x00000040 -#define HCINTMSK_NYET HCINTMSK_NYET_Msk // response received interrupt mask -#define HCINTMSK_TXERRM_Pos (7U) -#define HCINTMSK_TXERRM_Msk (0x1UL << HCINTMSK_TXERRM_Pos) // 0x00000080 -#define HCINTMSK_TXERRM HCINTMSK_TXERRM_Msk // Transaction error mask -#define HCINTMSK_BBERRM_Pos (8U) -#define HCINTMSK_BBERRM_Msk (0x1UL << HCINTMSK_BBERRM_Pos) // 0x00000100 -#define HCINTMSK_BBERRM HCINTMSK_BBERRM_Msk // Babble error mask -#define HCINTMSK_FRMORM_Pos (9U) -#define HCINTMSK_FRMORM_Msk (0x1UL << HCINTMSK_FRMORM_Pos) // 0x00000200 -#define HCINTMSK_FRMORM HCINTMSK_FRMORM_Msk // Frame overrun mask -#define HCINTMSK_DTERRM_Pos (10U) -#define HCINTMSK_DTERRM_Msk (0x1UL << HCINTMSK_DTERRM_Pos) // 0x00000400 -#define HCINTMSK_DTERRM HCINTMSK_DTERRM_Msk // Data toggle error mask - /******************** Bit definition for DIEPTSIZ register ********************/ #define DIEPTSIZ_XFRSIZ_Pos (0U) @@ -1810,11 +1974,9 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define HCTSIZ_DOPING_Pos (31U) #define HCTSIZ_DOPING_Msk (0x1UL << HCTSIZ_DOPING_Pos) // 0x80000000 #define HCTSIZ_DOPING HCTSIZ_DOPING_Msk // Do PING -#define HCTSIZ_DPID_Pos (29U) -#define HCTSIZ_DPID_Msk (0x3UL << HCTSIZ_DPID_Pos) // 0x60000000 -#define HCTSIZ_DPID HCTSIZ_DPID_Msk // Data PID -#define HCTSIZ_DPID_0 (0x1UL << HCTSIZ_DPID_Pos) // 0x20000000 -#define HCTSIZ_DPID_1 (0x2UL << HCTSIZ_DPID_Pos) // 0x40000000 +#define HCTSIZ_PID_Pos (29U) +#define HCTSIZ_PID_Msk (0x3UL << HCTSIZ_PID_Pos) // 0x60000000 +#define HCTSIZ_PID HCTSIZ_PID_Msk // Data PID /******************** Bit definition for DIEPDMA register ********************/ #define DIEPDMA_DMAADDR_Pos (0U) @@ -1973,32 +2135,32 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define DOEPTSIZ_STUPCNT_1 (0x2UL << DOEPTSIZ_STUPCNT_Pos) // 0x40000000 /******************** Bit definition for PCGCTL register ********************/ -#define PCGCTL_IF_DEV_MODE TU_BIT(31) -#define PCGCTL_P2HD_PRT_SPD_MASK (0x3ul << 29) -#define PCGCTL_P2HD_PRT_SPD_SHIFT 29 -#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3ul << 27) -#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27 -#define PCGCTL_MAC_DEV_ADDR_MASK (0x7ful << 20) -#define PCGCTL_MAC_DEV_ADDR_SHIFT 20 -#define PCGCTL_MAX_TERMSEL TU_BIT(19) -#define PCGCTL_MAX_XCVRSELECT_MASK (0x3ul << 17) -#define PCGCTL_MAX_XCVRSELECT_SHIFT 17 -#define PCGCTL_PORT_POWER TU_BIT(16) -#define PCGCTL_PRT_CLK_SEL_MASK (0x3ul << 14) -#define PCGCTL_PRT_CLK_SEL_SHIFT 14 -#define PCGCTL_ESS_REG_RESTORED TU_BIT(13) -#define PCGCTL_EXTND_HIBER_SWITCH TU_BIT(12) -#define PCGCTL_EXTND_HIBER_PWRCLMP TU_BIT(11) -#define PCGCTL_ENBL_EXTND_HIBER TU_BIT(10) -#define PCGCTL_RESTOREMODE TU_BIT(9) -#define PCGCTL_RESETAFTSUSP TU_BIT(8) -#define PCGCTL_DEEP_SLEEP TU_BIT(7) -#define PCGCTL_PHY_IN_SLEEP TU_BIT(6) -#define PCGCTL_ENBL_SLEEP_GATING TU_BIT(5) -#define PCGCTL_RSTPDWNMODULE TU_BIT(3) -#define PCGCTL_PWRCLMP TU_BIT(2) -#define PCGCTL_GATEHCLK TU_BIT(1) -#define PCGCTL_STOPPCLK TU_BIT(0) +#define PCGCCTL_IF_DEV_MODE TU_BIT(31) +#define PCGCCTL_P2HD_PRT_SPD_MASK (0x3ul << 29) +#define PCGCCTL_P2HD_PRT_SPD_SHIFT 29 +#define PCGCCTL_P2HD_DEV_ENUM_SPD_MASK (0x3ul << 27) +#define PCGCCTL_P2HD_DEV_ENUM_SPD_SHIFT 27 +#define PCGCCTL_MAC_DEV_ADDR_MASK (0x7ful << 20) +#define PCGCCTL_MAC_DEV_ADDR_SHIFT 20 +#define PCGCCTL_MAX_TERMSEL TU_BIT(19) +#define PCGCCTL_MAX_XCVRSELECT_MASK (0x3ul << 17) +#define PCGCCTL_MAX_XCVRSELECT_SHIFT 17 +#define PCGCCTL_PORT_POWER TU_BIT(16) +#define PCGCCTL_PRT_CLK_SEL_MASK (0x3ul << 14) +#define PCGCCTL_PRT_CLK_SEL_SHIFT 14 +#define PCGCCTL_ESS_REG_RESTORED TU_BIT(13) +#define PCGCCTL_EXTND_HIBER_SWITCH TU_BIT(12) +#define PCGCCTL_EXTND_HIBER_PWRCLMP TU_BIT(11) +#define PCGCCTL_ENBL_EXTND_HIBER TU_BIT(10) +#define PCGCCTL_RESTOREMODE TU_BIT(9) +#define PCGCCTL_RESETAFTSUSP TU_BIT(8) +#define PCGCCTL_DEEP_SLEEP TU_BIT(7) +#define PCGCCTL_PHY_IN_SLEEP TU_BIT(6) +#define PCGCCTL_ENBL_SLEEP_GATING TU_BIT(5) +#define PCGCCTL_RSTPDWNMODULE TU_BIT(3) +#define PCGCCTL_PWRCLMP TU_BIT(2) +#define PCGCCTL_GATEHCLK TU_BIT(1) +#define PCGCCTL_STOPPCLK TU_BIT(0) #define PCGCTL1_TIMER (0x3ul << 1) #define PCGCTL1_GATEEN TU_BIT(0) diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c new file mode 100644 index 000000000..53583426f --- /dev/null +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -0,0 +1,1340 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUH_ENABLED && defined(TUP_USBIP_DWC2) + +// Debug level for DWC2 +#define DWC2_DEBUG 2 + +#include "host/hcd.h" +#include "dwc2_common.h" + +// Max number of endpoints application can open, can be larger than DWC2_CHANNEL_COUNT_MAX +#ifndef CFG_TUH_DWC2_ENDPOINT_MAX +#define CFG_TUH_DWC2_ENDPOINT_MAX 16 +#endif + +#define DWC2_CHANNEL_COUNT_MAX 16 // absolute max channel count +#define DWC2_CHANNEL_COUNT(_dwc2) tu_min8((_dwc2)->ghwcfg2_bm.num_host_ch + 1, DWC2_CHANNEL_COUNT_MAX) + +TU_VERIFY_STATIC(CFG_TUH_DWC2_ENDPOINT_MAX <= 255, "currently only use 8-bit for index"); + +enum { + HPRT_W1_MASK = HPRT_CONN_DETECT | HPRT_ENABLE | HPRT_ENABLE_CHANGE | HPRT_OVER_CURRENT_CHANGE | HPRT_SUSPEND +}; + +enum { + HCD_XFER_ERROR_MAX = 3 +}; + +enum { + HCD_XFER_PERIOD_SPLIT_NYET_MAX = 3 +}; + +//-------------------------------------------------------------------- +// +//-------------------------------------------------------------------- + +// Host driver struct for each opened endpoint +typedef struct { + union { + uint32_t hcchar; + dwc2_channel_char_t hcchar_bm; + }; + union { + uint32_t hcsplt; + dwc2_channel_split_t hcsplt_bm; + }; + + struct TU_ATTR_PACKED { + uint32_t uframe_interval : 18; // micro-frame interval + uint32_t speed : 2; + uint32_t next_pid : 2; + uint32_t do_ping : 1; + // uint32_t : 9; + }; + + uint32_t uframe_countdown; // micro-frame count down to transfer for periodic, only need 18-bit + + uint8_t* buffer; + uint16_t buflen; +} hcd_endpoint_t; + +// Additional info for each channel when it is active +typedef struct { + volatile bool allocated; + uint8_t ep_id; + struct TU_ATTR_PACKED { + uint8_t err_count : 3; + uint8_t period_split_nyet_count : 3; + uint8_t halted_nyet : 1; + uint8_t halted_sof_schedule : 1; + }; + uint8_t result; + + uint16_t xferred_bytes; // bytes that accumulate transferred though USB bus for the whole hcd_edpt_xfer(), which can + // be composed of multiple channel_xfer_start() (retry with NAK/NYET) + uint16_t fifo_bytes; // bytes written/read from/to FIFO (may not be transferred on USB bus). +} hcd_xfer_t; + +typedef struct { + hcd_xfer_t xfer[DWC2_CHANNEL_COUNT_MAX]; + hcd_endpoint_t edpt[CFG_TUH_DWC2_ENDPOINT_MAX]; +} hcd_data_t; + +hcd_data_t _hcd_data; + +//-------------------------------------------------------------------- +// +//-------------------------------------------------------------------- +TU_ATTR_ALWAYS_INLINE static inline tusb_speed_t hprt_speed_get(dwc2_regs_t* dwc2) { + tusb_speed_t speed; + switch(dwc2->hprt_bm.speed) { + case HPRT_SPEED_HIGH: speed = TUSB_SPEED_HIGH; break; + case HPRT_SPEED_FULL: speed = TUSB_SPEED_FULL; break; + case HPRT_SPEED_LOW : speed = TUSB_SPEED_LOW ; break; + default: + speed = TUSB_SPEED_INVALID; + TU_BREAKPOINT(); + break; + } + return speed; +} + +TU_ATTR_ALWAYS_INLINE static inline bool dma_host_enabled(const dwc2_regs_t* dwc2) { + (void) dwc2; + // Internal DMA only + return CFG_TUH_DWC2_DMA_ENABLE && dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA; +} + +// Allocate a channel for new transfer +TU_ATTR_ALWAYS_INLINE static inline uint8_t channel_alloc(dwc2_regs_t* dwc2) { + const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); + for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + if (!xfer->allocated) { + tu_memclr(xfer, sizeof(hcd_xfer_t)); + xfer->allocated = true; + return ch_id; + } + } + return TUSB_INDEX_INVALID_8; +} + +// Check if is periodic (interrupt/isochronous) +TU_ATTR_ALWAYS_INLINE static inline bool edpt_is_periodic(uint8_t ep_type) { + return ep_type == HCCHAR_EPTYPE_INTERRUPT || ep_type == HCCHAR_EPTYPE_ISOCHRONOUS; +} + +TU_ATTR_ALWAYS_INLINE static inline uint8_t req_queue_avail(const dwc2_regs_t* dwc2, bool is_period) { + if (is_period) { + return dwc2->hptxsts_bm.req_queue_available; + } else { + return dwc2->hnptxsts_bm.req_queue_available; + } +} + +TU_ATTR_ALWAYS_INLINE static inline void channel_dealloc(dwc2_regs_t* dwc2, uint8_t ch_id) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + xfer->allocated = false; + dwc2->haintmsk &= ~TU_BIT(ch_id); +} + +TU_ATTR_ALWAYS_INLINE static inline bool channel_disable(const dwc2_regs_t* dwc2, dwc2_channel_t* channel) { + // disable also require request queue + TU_ASSERT(req_queue_avail(dwc2, edpt_is_periodic(channel->hcchar_bm.ep_type))); + channel->hcintmsk |= HCINT_HALTED; + channel->hcchar |= HCCHAR_CHDIS | HCCHAR_CHENA; // must set both CHDIS and CHENA + return true; +} + +// attempt to send IN token to receive data +TU_ATTR_ALWAYS_INLINE static inline bool channel_send_in_token(const dwc2_regs_t* dwc2, dwc2_channel_t* channel) { + TU_ASSERT(req_queue_avail(dwc2, edpt_is_periodic(channel->hcchar_bm.ep_type))); + channel->hcchar |= HCCHAR_CHENA; + return true; +} + +// Find currently enabled channel. Note: EP0 is bidirectional +TU_ATTR_ALWAYS_INLINE static inline uint8_t channel_find_enabled(dwc2_regs_t* dwc2, uint8_t dev_addr, uint8_t ep_num, uint8_t ep_dir) { + const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); + for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { + if (_hcd_data.xfer[ch_id].allocated) { + const dwc2_channel_char_t hcchar_bm = dwc2->channel[ch_id].hcchar_bm; + if (hcchar_bm.dev_addr == dev_addr && hcchar_bm.ep_num == ep_num && (ep_num == 0 || hcchar_bm.ep_dir == ep_dir)) { + return ch_id; + } + } + } + return TUSB_INDEX_INVALID_8; +} + + +// Allocate a new endpoint +TU_ATTR_ALWAYS_INLINE static inline uint8_t edpt_alloc(void) { + for (uint32_t i = 0; i < CFG_TUH_DWC2_ENDPOINT_MAX; i++) { + hcd_endpoint_t* edpt = &_hcd_data.edpt[i]; + if (edpt->hcchar_bm.enable == 0) { + tu_memclr(edpt, sizeof(hcd_endpoint_t)); + edpt->hcchar_bm.enable = 1; + return i; + } + } + return TUSB_INDEX_INVALID_8; +} + +// Find a endpoint that is opened previously with hcd_edpt_open() +// Note: EP0 is bidirectional +TU_ATTR_ALWAYS_INLINE static inline uint8_t edpt_find_opened(uint8_t dev_addr, uint8_t ep_num, uint8_t ep_dir) { + for (uint8_t i = 0; i < (uint8_t)CFG_TUH_DWC2_ENDPOINT_MAX; i++) { + const dwc2_channel_char_t* hcchar_bm = &_hcd_data.edpt[i].hcchar_bm; + if (hcchar_bm->enable && hcchar_bm->dev_addr == dev_addr && + hcchar_bm->ep_num == ep_num && (ep_num == 0 || hcchar_bm->ep_dir == ep_dir)) { + return i; + } + } + return TUSB_INDEX_INVALID_8; +} + +TU_ATTR_ALWAYS_INLINE static inline uint16_t cal_packet_count(uint16_t len, uint16_t ep_size) { + if (len == 0) { + return 1; + } else { + return tu_div_ceil(len, ep_size); + } +} + +TU_ATTR_ALWAYS_INLINE static inline uint8_t cal_next_pid(uint8_t pid, uint8_t packet_count) { + if (packet_count & 0x01) { + return pid ^ 0x02; // toggle DATA0 and DATA1 + } else { + return pid; + } +} + +//-------------------------------------------------------------------- +// +//-------------------------------------------------------------------- + +/* USB Data FIFO Layout + + The FIFO is split up into + - EPInfo: for storing DMA metadata (check dcd_dwc2.c for more details) + - 1 RX FIFO: for receiving data + - 1 TX FIFO for non-periodic (NPTX) + - 1 TX FIFO for periodic (PTX) + + We allocated TX FIFO from top to bottom (using top pointer), this to allow the RX FIFO to grow dynamically which is + possible since the free space is located between the RX and TX FIFOs. + + ----------------- ep_fifo_size + | HCDMAn | + |--------------|-- gdfifocfg.EPINFOBASE (max is ghwcfg3.dfifo_depth) + | Non-Periodic | + | TX FIFO | + |--------------|--- GNPTXFSIZ.addr (fixed size) + | Periodic | + | TX FIFO | + |--------------|--- HPTXFSIZ.addr (expandable downward) + | FREE | + | | + |--------------|-- GRXFSIZ (expandable upward) + | RX FIFO | + ---------------- 0 +*/ + +/* Programming Guide 2.1.2 FIFO RAM allocation + * RX + * - Largest-EPsize/4 + 2 (status info). recommended x2 if high bandwidth or multiple ISO are used. + * - 2 for transfer complete and channel halted status + * - 1 for each Control/Bulk out endpoint to Handle NAK/NYET (i.e max is number of host channel) + * + * TX non-periodic (NPTX) + * - At least largest-EPsize/4, recommended x2 + * + * TX periodic (PTX) + * - At least largest-EPsize*MulCount/4 (MulCount up to 3 for high-bandwidth ISO/interrupt) +*/ +static void dfifo_host_init(uint8_t rhport) { + const dwc2_controller_t* dwc2_controller = &_dwc2_controller[rhport]; + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + // Scatter/Gather DMA mode is not yet supported. Buffer DMA only need 1 words per channel + const bool is_dma = dma_host_enabled(dwc2); + uint16_t dfifo_top = dwc2_controller->ep_fifo_size/4; + if (is_dma) { + dfifo_top -= dwc2->ghwcfg2_bm.num_host_ch; + } + + // fixed allocation for now, improve later: + // - ptx_largest is limited to 256 for FS since most FS core only has 1024 bytes total + bool is_highspeed = dwc2_core_is_highspeed(dwc2, TUSB_ROLE_HOST); + uint32_t nptx_largest = is_highspeed ? TUSB_EPSIZE_BULK_HS/4 : TUSB_EPSIZE_BULK_FS/4; + uint32_t ptx_largest = is_highspeed ? TUSB_EPSIZE_ISO_HS_MAX/4 : 256/4; + + uint16_t nptxfsiz = 2 * nptx_largest; + uint16_t rxfsiz = 2 * (ptx_largest + 2) + dwc2->ghwcfg2_bm.num_host_ch; + TU_ASSERT(dfifo_top >= (nptxfsiz + rxfsiz),); + uint16_t ptxfsiz = dfifo_top - (nptxfsiz + rxfsiz); + + dwc2->gdfifocfg = (dfifo_top << GDFIFOCFG_EPINFOBASE_SHIFT) | dfifo_top; + + dfifo_top -= rxfsiz; + dwc2->grxfsiz = rxfsiz; + + dfifo_top -= nptxfsiz; + dwc2->gnptxfsiz = tu_u32_from_u16(nptxfsiz, dfifo_top); + + dfifo_top -= ptxfsiz; + dwc2->hptxfsiz = tu_u32_from_u16(ptxfsiz, dfifo_top); +} + +//--------------------------------------------------------------------+ +// Controller API +//--------------------------------------------------------------------+ + +// optional hcd configuration, called by tuh_configure() +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { + (void) rhport; + (void) cfg_id; + (void) cfg_param; + + return true; +} + +// Initialize controller to host mode +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + tu_memclr(&_hcd_data, sizeof(_hcd_data)); + + // Core Initialization + const bool is_highspeed = dwc2_core_is_highspeed(dwc2, TUSB_ROLE_HOST); + TU_ASSERT(dwc2_core_init(rhport, is_highspeed)); + + if (dma_host_enabled(dwc2)) { + // DMA seems to be only settable after a core reset, and not possible to switch on-the-fly + dwc2->gahbcfg |= GAHBCFG_DMAEN | GAHBCFG_HBSTLEN_2; + } else { + dwc2->gintmsk |= GINTSTS_RXFLVL; + } + + //------------- 3.1 Host Initialization -------------// + + // work at max supported speed + dwc2->hcfg &= ~HCFG_FSLS_ONLY; + + // Enable HFIR reload + if (dwc2->gsnpsid >= DWC2_CORE_REV_2_92a) { + dwc2->hfir |= HFIR_RELOAD_CTRL; + } + + // force host mode and wait for mode switch + dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_FDMOD) | GUSBCFG_FHMOD; + while ((dwc2->gintsts & GINTSTS_CMOD) != GINTSTS_CMODE_HOST) {} + + // configure fixed-allocated fifo scheme + dfifo_host_init(rhport); + + dwc2->hprt = HPRT_W1_MASK; // clear all write-1-clear bits + dwc2->hprt = HPRT_POWER; // turn on VBUS + + // Enable required interrupts + dwc2->gintmsk |= GINTSTS_OTGINT | GINTSTS_CONIDSTSCHNG | GINTSTS_HPRTINT | GINTSTS_HCINT; + + // NPTX can hold at least 2 packet, change interrupt level to half-empty + uint32_t gahbcfg = dwc2->gahbcfg & ~GAHBCFG_TX_FIFO_EPMTY_LVL; + gahbcfg |= GAHBCFG_GINT; // Enable global interrupt + dwc2->gahbcfg = gahbcfg; + + return true; +} + +// Enable USB interrupt +void hcd_int_enable (uint8_t rhport) { + dwc2_int_set(rhport, TUSB_ROLE_HOST, true); +} + +// Disable USB interrupt +void hcd_int_disable(uint8_t rhport) { + dwc2_int_set(rhport, TUSB_ROLE_HOST, false); +} + +// Get frame number (1ms) +uint32_t hcd_frame_number(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + return dwc2->hfnum & HFNUM_FRNUM_Msk; +} + +//--------------------------------------------------------------------+ +// Port API +//--------------------------------------------------------------------+ + +// Get the current connect status of roothub port +bool hcd_port_connect_status(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + return dwc2->hprt & HPRT_CONN_STATUS; +} + +// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete. +// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence. +void hcd_port_reset(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + uint32_t hprt = dwc2->hprt & ~HPRT_W1_MASK; + hprt |= HPRT_RESET; + dwc2->hprt = hprt; +} + +// Complete bus reset sequence, may be required by some controllers +void hcd_port_reset_end(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + uint32_t hprt = dwc2->hprt & ~HPRT_W1_MASK; // skip w1c bits + hprt &= ~HPRT_RESET; + dwc2->hprt = hprt; +} + +// Get port link speed +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + const tusb_speed_t speed = hprt_speed_get(dwc2); + return speed; +} + +// HCD closes all opened endpoints belong to this device +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { + (void) rhport; + for (uint8_t i = 0; i < (uint8_t) CFG_TUH_DWC2_ENDPOINT_MAX; i++) { + hcd_endpoint_t* edpt = &_hcd_data.edpt[i]; + if (edpt->hcchar_bm.enable && edpt->hcchar_bm.dev_addr == dev_addr) { + tu_memclr(edpt, sizeof(hcd_endpoint_t)); + } + } +} + +//--------------------------------------------------------------------+ +// Endpoints API +//--------------------------------------------------------------------+ + +// Open an endpoint +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t* desc_ep) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + const tusb_speed_t rh_speed = hprt_speed_get(dwc2); + + hcd_devtree_info_t devtree_info; + hcd_devtree_get_info(dev_addr, &devtree_info); + + // find a free endpoint + const uint8_t ep_id = edpt_alloc(); + TU_ASSERT(ep_id < CFG_TUH_DWC2_ENDPOINT_MAX); + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + + dwc2_channel_char_t* hcchar_bm = &edpt->hcchar_bm; + hcchar_bm->ep_size = tu_edpt_packet_size(desc_ep); + hcchar_bm->ep_num = tu_edpt_number(desc_ep->bEndpointAddress); + hcchar_bm->ep_dir = tu_edpt_dir(desc_ep->bEndpointAddress); + hcchar_bm->low_speed_dev = (devtree_info.speed == TUSB_SPEED_LOW) ? 1 : 0; + hcchar_bm->ep_type = desc_ep->bmAttributes.xfer; // ep_type matches TUSB_XFER_* + hcchar_bm->err_multi_count = 0; + hcchar_bm->dev_addr = dev_addr; + hcchar_bm->odd_frame = 0; + hcchar_bm->disable = 0; + hcchar_bm->enable = 1; + + dwc2_channel_split_t* hcsplt_bm = &edpt->hcsplt_bm; + hcsplt_bm->hub_port = devtree_info.hub_port; + hcsplt_bm->hub_addr = devtree_info.hub_addr; + hcsplt_bm->xact_pos = 0; + hcsplt_bm->split_compl = 0; + hcsplt_bm->split_en = (rh_speed == TUSB_SPEED_HIGH && devtree_info.speed != TUSB_SPEED_HIGH) ? 1 : 0; + + edpt->speed = devtree_info.speed; + edpt->next_pid = HCTSIZ_PID_DATA0; + if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { + edpt->uframe_interval = 1 << (desc_ep->bInterval - 1); + if (devtree_info.speed == TUSB_SPEED_FULL) { + edpt->uframe_interval <<= 3; + } + } else if (desc_ep->bmAttributes.xfer == TUSB_XFER_INTERRUPT) { + if (devtree_info.speed == TUSB_SPEED_HIGH) { + edpt->uframe_interval = 1 << (desc_ep->bInterval - 1); + } else { + edpt->uframe_interval = desc_ep->bInterval << 3; + } + } + + return true; +} + +// clean up channel after part of transfer is done but the whole urb is not complete +static void channel_xfer_out_wrapup(dwc2_regs_t* dwc2, uint8_t ch_id) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + + edpt->next_pid = channel->hctsiz_bm.pid; // save PID + + /* Since hctsiz.xfersize field reflects the number of bytes transferred via the AHB, not the USB) + * For IN: we can use hctsiz.xfersize as remaining bytes. + * For OUT: Must use the hctsiz.pktcnt field to determine how much data has been transferred. This field reflects the + * number of packets that have been transferred via the USB. This is always an integral number of packets if the + * transfer was halted before its normal completion. + */ + const uint16_t remain_packets = channel->hctsiz_bm.packet_count; + const uint16_t total_packets = cal_packet_count(edpt->buflen, channel->hcchar_bm.ep_size); + const uint16_t actual_bytes = (total_packets - remain_packets) * channel->hcchar_bm.ep_size; + + xfer->fifo_bytes = 0; + xfer->xferred_bytes += actual_bytes; + edpt->buffer += actual_bytes; + edpt->buflen -= actual_bytes; +} + +static bool channel_xfer_start(dwc2_regs_t* dwc2, uint8_t ch_id) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + dwc2_channel_char_t* hcchar_bm = &edpt->hcchar_bm; + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + bool const is_period = edpt_is_periodic(hcchar_bm->ep_type); + + // clear previous state + xfer->fifo_bytes = 0; + + // hchar: restore but don't enable yet + if (is_period) { + hcchar_bm->odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame + } + channel->hcchar = (edpt->hcchar & ~HCCHAR_CHENA); + + // hctsiz: zero length packet still count as 1 + const uint16_t packet_count = cal_packet_count(edpt->buflen, hcchar_bm->ep_size); + uint32_t hctsiz = (edpt->next_pid << HCTSIZ_PID_Pos) | (packet_count << HCTSIZ_PKTCNT_Pos) | edpt->buflen; + if (edpt->do_ping && edpt->speed == TUSB_SPEED_HIGH && + edpt->next_pid != HCTSIZ_PID_SETUP && hcchar_bm->ep_dir == TUSB_DIR_OUT) { + hctsiz |= HCTSIZ_DOPING; + } + channel->hctsiz = hctsiz; + edpt->do_ping = 0; + + // pre-calculate next PID based on packet count, adjusted in transfer complete interrupt if short packet + if (hcchar_bm->ep_num == 0) { + edpt->next_pid = HCTSIZ_PID_DATA1; // control data and status stage always start with DATA1 + } else { + edpt->next_pid = cal_next_pid(edpt->next_pid, packet_count); + } + + channel->hcsplt = edpt->hcsplt; + channel->hcint = 0xFFFFFFFFU; // clear all channel interrupts + + if (dma_host_enabled(dwc2)) { + uint32_t hcintmsk = HCINT_HALTED; + channel->hcintmsk = hcintmsk; + dwc2->haintmsk |= TU_BIT(ch_id); + + channel->hcdma = (uint32_t) edpt->buffer; + + if (hcchar_bm->ep_dir == TUSB_DIR_IN) { + channel_send_in_token(dwc2, channel); + } else { + channel->hcchar |= HCCHAR_CHENA; + } + } else { + uint32_t hcintmsk = HCINT_NAK | HCINT_XACT_ERR | HCINT_STALL | HCINT_XFER_COMPLETE | HCINT_DATATOGGLE_ERR; + if (hcchar_bm->ep_dir == TUSB_DIR_IN) { + hcintmsk |= HCINT_BABBLE_ERR | HCINT_DATATOGGLE_ERR | HCINT_ACK; + } else { + hcintmsk |= HCINT_NYET; + if (edpt->hcsplt_bm.split_en) { + hcintmsk |= HCINT_ACK; + } + } + channel->hcintmsk = hcintmsk; + dwc2->haintmsk |= TU_BIT(ch_id); + + // enable channel for slave mode: + // - OUT: it will enable corresponding FIFO channel + // - IN : it will write an IN request to the Non-periodic Request Queue, this will have dwc2 trying to send + // IN Token. If we got NAK, we have to re-enable the channel again in the interrupt. Due to the way usbh stack only + // call hcd_edpt_xfer() once, we will need to manage de-allocate/re-allocate IN channel dynamically. + if (hcchar_bm->ep_dir == TUSB_DIR_IN) { + channel_send_in_token(dwc2, channel); + } else { + channel->hcchar |= HCCHAR_CHENA; + if (edpt->buflen > 0) { + // To prevent conflict with other channel, we will enable periodic/non-periodic FIFO empty interrupt accordingly + // And write packet in the interrupt handler + dwc2->gintmsk |= (is_period ? GINTSTS_PTX_FIFO_EMPTY : GINTSTS_NPTX_FIFO_EMPTY); + } + } + } + + return true; +} + +// kick-off transfer with an endpoint +static bool edpt_xfer_kickoff(dwc2_regs_t* dwc2, uint8_t ep_id) { + uint8_t ch_id = channel_alloc(dwc2); + TU_ASSERT(ch_id < 16); // all channel are in used + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + xfer->ep_id = ep_id; + xfer->result = XFER_RESULT_INVALID; + + return channel_xfer_start(dwc2, ch_id); +} + +// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + const uint8_t ep_num = tu_edpt_number(ep_addr); + const uint8_t ep_dir = tu_edpt_dir(ep_addr); + + uint8_t ep_id = edpt_find_opened(dev_addr, ep_num, ep_dir); + TU_ASSERT(ep_id < CFG_TUH_DWC2_ENDPOINT_MAX); + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + + edpt->buffer = buffer; + edpt->buflen = buflen; + + if (ep_num == 0) { + // update ep_dir since control endpoint can switch direction + edpt->hcchar_bm.ep_dir = ep_dir; + } + + return edpt_xfer_kickoff(dwc2, ep_id); +} + +// Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + const uint8_t ep_num = tu_edpt_number(ep_addr); + const uint8_t ep_dir = tu_edpt_dir(ep_addr); + const uint8_t ep_id = edpt_find_opened(dev_addr, ep_num, ep_dir); + TU_VERIFY(ep_id < CFG_TUH_DWC2_ENDPOINT_MAX); + + // hcd_int_disable(rhport); + + // Find enabled channeled and disable it, channel will be de-allocated in the interrupt handler + const uint8_t ch_id = channel_find_enabled(dwc2, dev_addr, ep_num, ep_dir); + if (ch_id < 16) { + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + channel_disable(dwc2, channel); + } + + // hcd_int_enable(rhport); + + return true; +} + +// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, const uint8_t setup_packet[8]) { + uint8_t ep_id = edpt_find_opened(dev_addr, 0, TUSB_DIR_OUT); + TU_ASSERT(ep_id < CFG_TUH_DWC2_ENDPOINT_MAX); // no opened endpoint + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + edpt->next_pid = HCTSIZ_PID_SETUP; + + return hcd_edpt_xfer(rhport, dev_addr, 0, (uint8_t*)(uintptr_t) setup_packet, 8); +} + +// clear stall, data toggle is also reset to DATA0 +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + const uint8_t ep_num = tu_edpt_number(ep_addr); + const uint8_t ep_dir = tu_edpt_dir(ep_addr); + const uint8_t ep_id = edpt_find_opened(dev_addr, ep_num, ep_dir); + TU_VERIFY(ep_id < CFG_TUH_DWC2_ENDPOINT_MAX); + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + + edpt->next_pid = HCTSIZ_PID_DATA0; + + return true; +} + +//-------------------------------------------------------------------- +// HCD Event Handler +//-------------------------------------------------------------------- +static void channel_xfer_in_retry(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hcint) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + + if (edpt_is_periodic(channel->hcchar_bm.ep_type)){ + // retry immediately for periodic split NYET if we haven't reach max retry + if (channel->hcsplt_bm.split_en && channel->hcsplt_bm.split_compl && (hcint & HCINT_NYET || xfer->halted_nyet)) { + xfer->period_split_nyet_count++; + xfer->halted_nyet = 0; + if (xfer->period_split_nyet_count < HCD_XFER_PERIOD_SPLIT_NYET_MAX) { + channel->hcchar_bm.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame + channel_send_in_token(dwc2, channel); + return; + } else { + // too many NYET, de-allocate channel with below code + xfer->period_split_nyet_count = 0; + } + } + + // for periodic, de-allocate channel, enable SOF set frame counter for later transfer + edpt->next_pid = channel->hctsiz_bm.pid; // save PID + edpt->uframe_countdown = edpt->uframe_interval; + dwc2->gintmsk |= GINTSTS_SOF; + + if (hcint & HCINT_HALTED) { + // already halted, de-allocate channel (called from DMA isr) + channel_dealloc(dwc2, ch_id); + } else { + // disable channel first if not halted (called slave isr) + xfer->halted_sof_schedule = 1; + channel_disable(dwc2, channel); + } + } else { + // for control/bulk: retry immediately + channel_send_in_token(dwc2, channel); + } +} + +#if CFG_TUSB_DEBUG +TU_ATTR_ALWAYS_INLINE static inline void print_hcint(uint32_t hcint) { + const char* str[] = { + "XFRC", "HALTED", "AHBERR", "STALL", + "NAK", "ACK", "NYET", "XERR", + "BBLERR", "FRMOR", "DTERR", "BNA", + "XCSERR", "DESC_LST" + }; + + for(uint32_t i=0; i<14; i++) { + if (hcint & TU_BIT(i)) { + TU_LOG1("%s ", str[i]); + } + } + TU_LOG1("\r\n"); +} +#endif + +#if CFG_TUH_DWC2_SLAVE_ENABLE +static void handle_rxflvl_irq(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + // Pop control word off FIFO + const dwc2_grxstsp_t grxstsp_bm = dwc2->grxstsp_bm; + const uint8_t ch_id = grxstsp_bm.ep_ch_num; + + switch (grxstsp_bm.packet_status) { + case GRXSTS_PKTSTS_RX_DATA: { + // In packet received, pop this entry --> ACK interrupt + const uint16_t byte_count = grxstsp_bm.byte_count; + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + TU_ASSERT(xfer->ep_id < CFG_TUH_DWC2_ENDPOINT_MAX,); + hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + + if (byte_count) { + dfifo_read_packet(dwc2, edpt->buffer + xfer->xferred_bytes, byte_count); + xfer->xferred_bytes += byte_count; + xfer->fifo_bytes = byte_count; + } + break; + } + + case GRXSTS_PKTSTS_RX_COMPLETE: + // In transfer complete: After this entry is popped from the rx FIFO, dwc2 asserts a Transfer Completed + // interrupt --> handle_channel_irq() + break; + + case GRXSTS_PKTSTS_HOST_DATATOGGLE_ERR: + TU_ASSERT(0, ); // maybe try to change DToggle + break; + + case GRXSTS_PKTSTS_HOST_CHANNEL_HALTED: + // triggered when channel.hcchar_bm.disable is set + // TODO handle later + break; + + default: break; // ignore other status + } +} + +// return true if there is still pending data and need more ISR +static bool handle_txfifo_empty(dwc2_regs_t* dwc2, bool is_periodic) { + // Use period txsts for both p/np to get request queue space available (1-bit difference, it is small enough) + volatile dwc2_hptxsts_t* txsts_bm = (volatile dwc2_hptxsts_t*) (is_periodic ? &dwc2->hptxsts : &dwc2->hnptxsts); + + const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); + for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + // skip writing to FIFO if channel is expecting halted. + if (!(channel->hcintmsk & HCINT_HALTED) && (channel->hcchar_bm.ep_dir == TUSB_DIR_OUT)) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + TU_ASSERT(xfer->ep_id < CFG_TUH_DWC2_ENDPOINT_MAX); + hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + + const uint16_t remain_packets = channel->hctsiz_bm.packet_count; + for (uint16_t i = 0; i < remain_packets; i++) { + const uint16_t remain_bytes = edpt->buflen - xfer->fifo_bytes; + const uint16_t xact_bytes = tu_min16(remain_bytes, channel->hcchar_bm.ep_size); + + // skip if there is not enough space in FIFO and RequestQueue. + // Packet's last word written to FIFO will trigger a request queue + if ((xact_bytes > (txsts_bm->fifo_available << 2)) || (txsts_bm->req_queue_available == 0)) { + return true; + } + + dfifo_write_packet(dwc2, ch_id, edpt->buffer + xfer->fifo_bytes, xact_bytes); + xfer->fifo_bytes += xact_bytes; + } + } + } + + return false; // no channel has pending data +} + +static bool handle_channel_in_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hcint) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + bool is_done = false; + + // if (channel->hcsplt_bm.split_en) { + // if (edpt->hcchar_bm.ep_num == 1) { + // TU_LOG1("Frame %u, ch %u: ep %u, hcint 0x%04lX ", dwc2->hfnum_bm.num, ch_id, channel->hcchar_bm.ep_num, hcint); + // print_hcint(hcint); + // } + + if (hcint & HCINT_XFER_COMPLETE) { + if (edpt->hcchar_bm.ep_num != 0) { + edpt->next_pid = channel->hctsiz_bm.pid; // save pid (already toggled) + } + + const uint16_t remain_packets = channel->hctsiz_bm.packet_count; + if (channel->hcsplt_bm.split_en && remain_packets && xfer->fifo_bytes == edpt->hcchar_bm.ep_size) { + // Split can only complete 1 transaction (up to 1 packet) at a time, schedule more + channel->hcsplt_bm.split_compl = 0; + } else { + xfer->result = XFER_RESULT_SUCCESS; + } + + channel_disable(dwc2, channel); + } else if (hcint & (HCINT_XACT_ERR | HCINT_BABBLE_ERR | HCINT_STALL)) { + if (hcint & HCINT_STALL) { + xfer->result = XFER_RESULT_STALLED; + } else if (hcint & HCINT_BABBLE_ERR) { + xfer->result = XFER_RESULT_FAILED; + } else if (hcint & HCINT_XACT_ERR) { + xfer->err_count++; + channel->hcintmsk |= HCINT_ACK; + } + + channel_disable(dwc2, channel); + } else if (hcint & HCINT_NYET) { + // restart complete split + channel->hcsplt_bm.split_compl = 1; + xfer->halted_nyet = 1; + channel_disable(dwc2, channel); + } else if (hcint & HCINT_NAK) { + // NAK received, re-enable channel if request queue is available + if (channel->hcsplt_bm.split_en) { + channel->hcsplt_bm.split_compl = 0; // restart with start-split + } + + channel_disable(dwc2, channel); + } else if (hcint & HCINT_ACK) { + xfer->err_count = 0; + + if (channel->hcsplt_bm.split_en) { + if (!channel->hcsplt_bm.split_compl) { + // start split is ACK --> do complete split + channel->hcintmsk |= HCINT_NYET; + channel->hcsplt_bm.split_compl = 1; + channel_send_in_token(dwc2, channel); + } else { + // do nothing for complete split with DATA, this will trigger XferComplete and handled there + } + } else { + // ACK with data + const uint16_t remain_packets = channel->hctsiz_bm.packet_count; + if (remain_packets) { + // still more packet to receive, also reset to start split + channel->hcsplt_bm.split_compl = 0; + channel_send_in_token(dwc2, channel); + } + } + } else if (hcint & HCINT_HALTED) { + channel->hcintmsk &= ~HCINT_HALTED; + if (xfer->halted_sof_schedule) { + // de-allocate channel but does not complete xfer, we schedule it in the SOF interrupt + channel_dealloc(dwc2, ch_id); + } else if (xfer->result != XFER_RESULT_INVALID) { + is_done = true; + } else if (xfer->err_count == HCD_XFER_ERROR_MAX) { + xfer->result = XFER_RESULT_FAILED; + is_done = true; + } else { + // got here due to NAK or NYET + channel_xfer_in_retry(dwc2, ch_id, hcint); + } + } else if (hcint & HCINT_DATATOGGLE_ERR) { + xfer->err_count = 0; + TU_ASSERT(false); + } + return is_done; +} + +static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hcint) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + bool is_done = false; + + if (hcint & HCINT_XFER_COMPLETE) { + is_done = true; + xfer->result = XFER_RESULT_SUCCESS; + channel->hcintmsk &= ~HCINT_ACK; + } else if (hcint & HCINT_STALL) { + xfer->result = XFER_RESULT_STALLED; + channel_disable(dwc2, channel); + } else if (hcint & HCINT_NYET) { + xfer->err_count = 0; + if (channel->hcsplt_bm.split_en) { + // retry complete split + channel->hcsplt_bm.split_compl = 1; + channel->hcchar |= HCCHAR_CHENA; + } else { + edpt->do_ping = 1; + channel_xfer_out_wrapup(dwc2, ch_id); + channel_disable(dwc2, channel); + } + } else if (hcint & (HCINT_NAK | HCINT_XACT_ERR)) { + // clean up transfer so far, disable and start again later + channel_xfer_out_wrapup(dwc2, ch_id); + channel_disable(dwc2, channel); + if (hcint & HCINT_XACT_ERR) { + xfer->err_count++; + channel->hcintmsk |= HCINT_ACK; + } else { + // NAK disable channel to flush all posted request and try again + edpt->do_ping = 1; + xfer->err_count = 0; + } + } else if (hcint & HCINT_HALTED) { + channel->hcintmsk &= ~HCINT_HALTED; + if (xfer->result != XFER_RESULT_INVALID) { + is_done = true; + } else if (xfer->err_count == HCD_XFER_ERROR_MAX) { + xfer->result = XFER_RESULT_FAILED; + is_done = true; + } else { + // Got here due to NAK or NYET + TU_ASSERT(channel_xfer_start(dwc2, ch_id)); + } + } else if (hcint & HCINT_ACK) { + xfer->err_count = 0; + channel->hcintmsk &= ~HCINT_ACK; + if (channel->hcsplt_bm.split_en && !channel->hcsplt_bm.split_compl) { + // start split is ACK --> do complete split + channel->hcsplt_bm.split_compl = 1; + channel->hcchar |= HCCHAR_CHENA; + } + } + + if (is_done) { + xfer->xferred_bytes += xfer->fifo_bytes; + xfer->fifo_bytes = 0; + } + + return is_done; +} +#endif + +#if CFG_TUH_DWC2_DMA_ENABLE +static bool handle_channel_in_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hcint) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + + bool is_done = false; + + // TU_LOG1("in hcint = %02lX\r\n", hcint); + + if (hcint & HCINT_HALTED) { + if (hcint & (HCINT_XFER_COMPLETE | HCINT_STALL | HCINT_BABBLE_ERR)) { + const uint16_t remain_bytes = (uint16_t) channel->hctsiz_bm.xfer_size; + const uint16_t remain_packets = channel->hctsiz_bm.packet_count; + const uint16_t actual_len = edpt->buflen - remain_bytes; + xfer->xferred_bytes += actual_len; + + is_done = true; + + if (hcint & HCINT_STALL) { + xfer->result = XFER_RESULT_STALLED; + } else if (hcint & HCINT_BABBLE_ERR) { + xfer->result = XFER_RESULT_FAILED; + } else if (channel->hcsplt_bm.split_en && remain_packets && actual_len == edpt->hcchar_bm.ep_size) { + // Split can only complete 1 transaction (up to 1 packet) at a time, schedule more + is_done = false; + edpt->buffer += actual_len; + edpt->buflen -= actual_len; + + channel->hcsplt_bm.split_compl = 0; + channel_xfer_in_retry(dwc2, ch_id, hcint); + } else { + xfer->result = XFER_RESULT_SUCCESS; + } + + xfer->err_count = 0; + channel->hcintmsk &= ~HCINT_ACK; + } else if (hcint & HCINT_XACT_ERR) { + xfer->err_count++; + if (xfer->err_count >= HCD_XFER_ERROR_MAX) { + is_done = true; + xfer->result = XFER_RESULT_FAILED; + } else { + channel->hcintmsk |= HCINT_ACK | HCINT_NAK | HCINT_DATATOGGLE_ERR; + channel->hcsplt_bm.split_compl = 0; + channel_xfer_in_retry(dwc2, ch_id, hcint); + } + } else if (hcint & HCINT_NYET) { + // Must handle nyet before nak or ack. Could get a nyet at the same time as either of those on a BULK/CONTROL + // OUT that started with a PING. The nyet takes precedence. + if (channel->hcsplt_bm.split_en) { + // split not yet mean hub has no data, retry complete split + channel->hcsplt_bm.split_compl = 1; + channel_xfer_in_retry(dwc2, ch_id, hcint); + } + } else if (hcint & HCINT_ACK) { + xfer->err_count = 0; + channel->hcintmsk &= ~HCINT_ACK; + if (channel->hcsplt_bm.split_en) { + // start split is ACK --> do complete split + // TODO: for ISO must use xact_pos to plan complete split based on microframe (up to 187.5 bytes/uframe) + channel->hcsplt_bm.split_compl = 1; + if (edpt_is_periodic(channel->hcchar_bm.ep_type)) { + channel->hcchar_bm.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame + } + channel_send_in_token(dwc2, channel); + } + } else if (hcint & (HCINT_NAK | HCINT_DATATOGGLE_ERR)) { + xfer->err_count = 0; + channel->hcintmsk &= ~(HCINT_NAK | HCINT_DATATOGGLE_ERR); + channel->hcsplt_bm.split_compl = 0; // restart with start-split + channel_xfer_in_retry(dwc2, ch_id, hcint); + } else if (hcint & HCINT_FARME_OVERRUN) { + // retry start-split in next binterval + channel_xfer_in_retry(dwc2, ch_id, hcint); + } + } + + return is_done; +} + +static bool handle_channel_out_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hcint) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + + bool is_done = false; + + // TU_LOG1("out hcint = %02lX\r\n", hcint); + + if (hcint & HCINT_HALTED) { + if (hcint & (HCINT_XFER_COMPLETE | HCINT_STALL)) { + is_done = true; + xfer->err_count = 0; + if (hcint & HCINT_XFER_COMPLETE) { + xfer->result = XFER_RESULT_SUCCESS; + xfer->xferred_bytes += edpt->buflen; + } else { + xfer->result = XFER_RESULT_STALLED; + channel_xfer_out_wrapup(dwc2, ch_id); + } + channel->hcintmsk &= ~HCINT_ACK; + } else if (hcint & HCINT_XACT_ERR) { + if (hcint & (HCINT_NAK | HCINT_NYET | HCINT_ACK)) { + xfer->err_count = 0; + // clean up transfer so far and start again + channel_xfer_out_wrapup(dwc2, ch_id); + channel_xfer_start(dwc2, ch_id); + } else { + xfer->err_count++; + if (xfer->err_count >= HCD_XFER_ERROR_MAX) { + xfer->result = XFER_RESULT_FAILED; + is_done = true; + } else { + // clean up transfer so far and start again + channel_xfer_out_wrapup(dwc2, ch_id); + channel_xfer_start(dwc2, ch_id); + } + } + } else if (hcint & HCINT_NYET) { + if (channel->hcsplt_bm.split_en && channel->hcsplt_bm.split_compl) { + // split not yet mean hub has no data, retry complete split + channel->hcsplt_bm.split_compl = 1; + channel->hcchar |= HCCHAR_CHENA; + } + } else if (hcint & HCINT_ACK) { + xfer->err_count = 0; + if (channel->hcsplt_bm.split_en && !channel->hcsplt_bm.split_compl) { + // start split is ACK --> do complete split + channel->hcsplt_bm.split_compl = 1; + channel->hcchar |= HCCHAR_CHENA; + } + } + } else if (hcint & HCINT_ACK) { + xfer->err_count = 0; + channel->hcintmsk &= ~HCINT_ACK; + } + + return is_done; +} +#endif + +static void handle_channel_irq(uint8_t rhport, bool in_isr) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + const bool is_dma = dma_host_enabled(dwc2); + const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); + + for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { + if (tu_bit_test(dwc2->haint, ch_id)) { + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + TU_ASSERT(xfer->ep_id < CFG_TUH_DWC2_ENDPOINT_MAX,); + dwc2_channel_char_t hcchar_bm = channel->hcchar_bm; + + uint32_t hcint = channel->hcint; + channel->hcint = hcint; + + bool is_done; + if (is_dma) { + #if CFG_TUH_DWC2_DMA_ENABLE + if (hcchar_bm.ep_dir == TUSB_DIR_OUT) { + is_done = handle_channel_out_dma(dwc2, ch_id, hcint); + } else { + is_done = handle_channel_in_dma(dwc2, ch_id, hcint); + } + #endif + } else { + #if CFG_TUH_DWC2_SLAVE_ENABLE + if (hcchar_bm.ep_dir == TUSB_DIR_OUT) { + is_done = handle_channel_out_slave(dwc2, ch_id, hcint); + } else { + is_done = handle_channel_in_slave(dwc2, ch_id, hcint); + } + #endif + } + + if (is_done) { + const uint8_t ep_addr = tu_edpt_addr(hcchar_bm.ep_num, hcchar_bm.ep_dir); + hcd_event_xfer_complete(hcchar_bm.dev_addr, ep_addr, xfer->xferred_bytes, xfer->result, in_isr); + channel_dealloc(dwc2, ch_id); + } + } + } +} + +// SOF is enabled for scheduled periodic transfer +static bool handle_sof_irq(uint8_t rhport, bool in_isr) { + (void) in_isr; + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + bool more_isr = false; + + // If highspeed then SOF is 125us, else 1ms + const uint32_t ucount = (hprt_speed_get(dwc2) == TUSB_SPEED_HIGH ? 1 : 8); + + for(uint8_t ep_id = 0; ep_id < CFG_TUH_DWC2_ENDPOINT_MAX; ep_id++) { + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + if (edpt->hcchar_bm.enable && edpt_is_periodic(edpt->hcchar_bm.ep_type) && edpt->uframe_countdown > 0) { + edpt->uframe_countdown -= tu_min32(ucount, edpt->uframe_countdown); + if (edpt->uframe_countdown == 0) { + if (!edpt_xfer_kickoff(dwc2, ep_id)) { + edpt->uframe_countdown = ucount; // failed to start, try again next frame + } + } + + more_isr = true; + } + } + + return more_isr; +} + +// Config HCFG FS/LS clock and HFIR for SOF interval according to link speed (value is in PHY clock unit) +static void port0_enable(dwc2_regs_t* dwc2, tusb_speed_t speed) { + uint32_t hcfg = dwc2->hcfg & ~HCFG_FSLS_PHYCLK_SEL; + + const dwc2_gusbcfg_t gusbcfg_bm = dwc2->gusbcfg_bm; + uint32_t phy_clock; + + if (gusbcfg_bm.phy_sel) { + phy_clock = 48; // dedicated FS is 48Mhz + if (speed == TUSB_SPEED_LOW) { + hcfg |= HCFG_FSLS_PHYCLK_SEL_6MHZ; + } else { + hcfg |= HCFG_FSLS_PHYCLK_SEL_48MHZ; + } + } else { + if (gusbcfg_bm.ulpi_utmi_sel) { + phy_clock = 60; // ULPI 8-bit is 60Mhz + } else { + // UTMI+ 16-bit is 30Mhz, 8-bit is 60Mhz + phy_clock = gusbcfg_bm.phy_if16 ? 30 : 60; + + // Enable UTMI+ low power mode 48Mhz external clock if not highspeed + if (speed == TUSB_SPEED_HIGH) { + dwc2->gusbcfg &= ~GUSBCFG_PHYLPCS; + } else { + dwc2->gusbcfg |= GUSBCFG_PHYLPCS; + // may need to reset port + } + } + hcfg |= HCFG_FSLS_PHYCLK_SEL_30_60MHZ; + } + + dwc2->hcfg = hcfg; + + uint32_t hfir = dwc2->hfir & ~HFIR_FRIVL_Msk; + if (speed == TUSB_SPEED_HIGH) { + hfir |= 125*phy_clock; + } else { + hfir |= 1000*phy_clock; + } + + dwc2->hfir = hfir; +} + +/* Handle Host Port interrupt, possible source are: + - Connection Detection + - Enable Change + - Over Current Change +*/ +static void handle_hprt_irq(uint8_t rhport, bool in_isr) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + uint32_t hprt = dwc2->hprt & ~HPRT_W1_MASK; + const dwc2_hprt_t hprt_bm = dwc2->hprt_bm; + + if (dwc2->hprt & HPRT_CONN_DETECT) { + // Port Connect Detect + hprt |= HPRT_CONN_DETECT; + + if (hprt_bm.conn_status) { + hcd_event_device_attach(rhport, in_isr); + } else { + hcd_event_device_remove(rhport, in_isr); + } + } + + if (dwc2->hprt & HPRT_ENABLE_CHANGE) { + // Port enable change + hprt |= HPRT_ENABLE_CHANGE; + + if (hprt_bm.enable) { + // Port enable + const tusb_speed_t speed = hprt_speed_get(dwc2); + port0_enable(dwc2, speed); + } else { + // TU_ASSERT(false, ); + } + } + + dwc2->hprt = hprt; // clear interrupt +} + +/* Interrupt Hierarchy + HCINTn HPRT + | | + HAINT.CHn | + | | + GINTSTS : HCInt | PrtInt | NPTxFEmp | PTxFEmpp | RXFLVL | SOF +*/ +void hcd_int_handler(uint8_t rhport, bool in_isr) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + const uint32_t gintmsk = dwc2->gintmsk; + const uint32_t gintsts = dwc2->gintsts & gintmsk; + + // TU_LOG1_HEX(gintsts); + + if (gintsts & GINTSTS_CONIDSTSCHNG) { + // Connector ID status change + dwc2->gintsts = GINTSTS_CONIDSTSCHNG; + + //if (dwc2->gotgctl) + // dwc2->hprt = HPRT_POWER; // power on port to turn on VBUS + //dwc2->gintmsk |= GINTMSK_PRTIM; + // TODO wait for SRP if OTG + } + + if (gintsts & GINTSTS_SOF) { + const bool more_sof = handle_sof_irq(rhport, in_isr); + if (!more_sof) { + dwc2->gintmsk &= ~GINTSTS_SOF; + } + } + + if (gintsts & GINTSTS_HPRTINT) { + // Host port interrupt: source is cleared in HPRT register + // TU_LOG1_HEX(dwc2->hprt); + handle_hprt_irq(rhport, in_isr); + } + + if (gintsts & GINTSTS_HCINT) { + // Host Channel interrupt: source is cleared in HCINT register + // must be handled after TX FIFO empty + handle_channel_irq(rhport, in_isr); + } + +#if CFG_TUH_DWC2_SLAVE_ENABLE + // RxFIFO non-empty interrupt handling + if (gintsts & GINTSTS_RXFLVL) { + // RXFLVL bit is read-only + dwc2->gintmsk &= ~GINTSTS_RXFLVL; // disable RXFLVL interrupt while reading + + do { + handle_rxflvl_irq(rhport); // read all packets + } while(dwc2->gintsts & GINTSTS_RXFLVL); + + dwc2->gintmsk |= GINTSTS_RXFLVL; + } + + if (gintsts & GINTSTS_NPTX_FIFO_EMPTY) { + // NPTX FIFO empty interrupt, this is read-only and cleared by hardware when FIFO is written + const bool more_nptxfe = handle_txfifo_empty(dwc2, false); + if (!more_nptxfe) { + // no more pending packet, disable interrupt + dwc2->gintmsk &= ~GINTSTS_NPTX_FIFO_EMPTY; + } + } + + if (gintsts & GINTSTS_PTX_FIFO_EMPTY) { + // PTX FIFO empty interrupt, this is read-only and cleared by hardware when FIFO is written + const bool more_ptxfe = handle_txfifo_empty(dwc2, true); + if (!more_ptxfe) { + // no more pending packet, disable interrupt + dwc2->gintmsk &= ~GINTSTS_PTX_FIFO_EMPTY; + } + } +#endif +} + +#endif diff --git a/src/tusb.c b/src/tusb.c index 3ab2004d2..65a850930 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -39,14 +39,25 @@ #include "host/usbh_pvt.h" #endif -#define TUP_USBIP_CONTROLLER_NUM 2 +tusb_role_t _tusb_rhport_role[TUP_USBIP_CONTROLLER_NUM] = { TUSB_ROLE_INVALID }; -static tusb_role_t _rhport_role[TUP_USBIP_CONTROLLER_NUM] = { TUSB_ROLE_INVALID }; +//-------------------------------------------------------------------- +// Weak/Default API, can be overwritten by Application +//-------------------------------------------------------------------- + +TU_ATTR_WEAK void tusb_time_delay_ms_api(uint32_t ms) { +#if CFG_TUSB_OS != OPT_OS_NONE + osal_task_delay(ms); +#else + // delay using millis() (if implemented) and/or frame number if possible + const uint32_t time_ms = tusb_time_millis_api(); + while ((tusb_time_millis_api() - time_ms) < ms) {} +#endif +} //--------------------------------------------------------------------+ // Public API //--------------------------------------------------------------------+ - bool tusb_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // backward compatible called with tusb_init(void) #if defined(TUD_OPT_RHPORT) || defined(TUH_OPT_RHPORT) @@ -57,8 +68,8 @@ bool tusb_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { .role = TUSB_ROLE_DEVICE, .speed = TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL }; - TU_ASSERT ( tud_rhport_init(rhport, &dev_init) ); - _rhport_role[TUD_OPT_RHPORT] = TUSB_ROLE_DEVICE; + TU_ASSERT ( tud_rhport_init(TUD_OPT_RHPORT, &dev_init) ); + _tusb_rhport_role[TUD_OPT_RHPORT] = TUSB_ROLE_DEVICE; #endif #if CFG_TUH_ENABLED && defined(TUH_OPT_RHPORT) @@ -68,7 +79,7 @@ bool tusb_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { .speed = TUH_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL }; TU_ASSERT( tuh_rhport_init(TUH_OPT_RHPORT, &host_init) ); - _rhport_role[TUH_OPT_RHPORT] = TUSB_ROLE_HOST; + _tusb_rhport_role[TUH_OPT_RHPORT] = TUSB_ROLE_HOST; #endif return true; @@ -77,6 +88,7 @@ bool tusb_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // new API with explicit rhport and role TU_ASSERT(rhport < TUP_USBIP_CONTROLLER_NUM && rh_init->role != TUSB_ROLE_INVALID); + _tusb_rhport_role[rhport] = rh_init->role; #if CFG_TUD_ENABLED if (rh_init->role == TUSB_ROLE_DEVICE) { @@ -90,7 +102,6 @@ bool tusb_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { } #endif - _rhport_role[rhport] = rh_init->role; return true; } @@ -112,14 +123,14 @@ void tusb_int_handler(uint8_t rhport, bool in_isr) { TU_VERIFY(rhport < TUP_USBIP_CONTROLLER_NUM,); #if CFG_TUD_ENABLED - if (_rhport_role[rhport] == TUSB_ROLE_DEVICE) { + if (_tusb_rhport_role[rhport] == TUSB_ROLE_DEVICE) { (void) in_isr; dcd_int_handler(rhport); } #endif #if CFG_TUH_ENABLED - if (_rhport_role[rhport] == TUSB_ROLE_HOST) { + if (_tusb_rhport_role[rhport] == TUSB_ROLE_HOST) { hcd_int_handler(rhport, in_isr); } #endif diff --git a/src/tusb.h b/src/tusb.h index 2f30a5739..cb6021b33 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -127,10 +127,8 @@ //--------------------------------------------------------------------+ -// APPLICATION API +// User API //--------------------------------------------------------------------+ - - #if CFG_TUH_ENABLED || CFG_TUD_ENABLED // Internal helper for backward compatible with tusb_init(void) @@ -167,6 +165,15 @@ void tusb_int_handler(uint8_t rhport, bool in_isr); #endif +//--------------------------------------------------------------------+ +// API Implemented by user +//--------------------------------------------------------------------+ + +// Get current milliseconds, required by some port/configuration without RTOS +uint32_t tusb_time_millis_api(void); + +// Delay in milliseconds, use tusb_time_millis_api() by default. required by some port/configuration with no RTOS +void tusb_time_delay_ms_api(uint32_t ms); #ifdef __cplusplus } diff --git a/src/tusb_option.h b/src/tusb_option.h index fdc949747..e9b6a5806 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -125,7 +125,8 @@ #define OPT_MCU_ESP32C2 905 ///< Espressif ESP32-C2 #define OPT_MCU_ESP32H2 906 ///< Espressif ESP32-H2 #define OPT_MCU_ESP32P4 907 ///< Espressif ESP32-P4 -#define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU +#define TUSB_MCU_VENDOR_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU +#define TUP_MCU_ESPRESSIF TUSB_MCU_VENDOR_ESPRESSIF // for backward compatibility // Dialog #define OPT_MCU_DA1469X 1000 ///< Dialog Semiconductor DA1469x @@ -240,6 +241,8 @@ #include "tusb_config.h" #endif +#include "common/tusb_mcu.h" + //--------------------------------------------------------------------+ // USBIP //--------------------------------------------------------------------+ @@ -253,6 +256,22 @@ #define CFG_TUD_DWC2_DMA 0 #endif +// Enable DWC2 Slave mode for host +#ifndef CFG_TUH_DWC2_SLAVE_ENABLE + #ifndef CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT + #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT 1 + #endif + #define CFG_TUH_DWC2_SLAVE_ENABLE CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT +#endif + +// Enable DWC2 DMA for host +#ifndef CFG_TUH_DWC2_DMA_ENABLE + #ifndef CFG_TUH_DWC2_DMA_ENABLE_DEFAULT + #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 1 + #endif + #define CFG_TUH_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE_DEFAULT +#endif + // Enable PIO-USB software host controller #ifndef CFG_TUH_RPI_PIO_USB #define CFG_TUH_RPI_PIO_USB 0 @@ -267,7 +286,6 @@ #define CFG_TUH_MAX3421 0 #endif -#include "common/tusb_mcu.h" //-------------------------------------------------------------------- // RootHub Mode detection diff --git a/test/hil/hfp.json b/test/hil/hfp.json index e79a3cfc9..8ba7a8f44 100644 --- a/test/hil/hfp.json +++ b/test/hil/hfp.json @@ -3,23 +3,38 @@ { "name": "stm32l412nucleo", "uid": "41003B000E504E5457323020", - "flasher": "jlink", - "flasher_sn": "774470029", - "flasher_args": "-device STM32L412KB" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "774470029", + "args": "-device STM32L412KB" + } }, { "name": "stm32f746disco", "uid": "210041000C51343237303334", - "flasher": "jlink", - "flasher_sn": "770935966", - "flasher_args": "-device STM32F746NG" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "770935966", + "args": "-device STM32F746NG" + } }, { "name": "lpcxpresso43s67", "uid": "08F000044528BAAA8D858F58C50700F5", - "flasher": "jlink", - "flasher_sn": "728973776", - "flasher_args": "-device LPC43S67_M4" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "728973776", + "args": "-device LPC43S67_M4" + } } ] } diff --git a/test/hil/hil_ci_set_matrix.py b/test/hil/hil_ci_set_matrix.py index 192174e16..67ce2abb8 100644 --- a/test/hil/hil_ci_set_matrix.py +++ b/test/hil/hil_ci_set_matrix.py @@ -22,7 +22,8 @@ def main(): } for board in config['boards']: name = board['name'] - if board['flasher'] == 'esptool': + flasher = board['flasher'] + if flasher['name'] == 'esptool': toolchain = 'esp-idf' else: toolchain = 'arm-gcc' diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 0d7cae77e..f125c0d28 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -46,10 +46,31 @@ STATUS_SKIPPED = "\033[33mSkipped\033[0m" verbose = False +WCH_RISCV_CONTENT = """ +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 + +set _TARGETNAME $_CHIPNAME.cpu + +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 +set _FLASHNAME $_CHIPNAME.flash + +flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 + +echo "Ready for Remote Connections" +""" + # ------------------------------------------------------------- # Path # ------------------------------------------------------------- OPENCOD_ADI_PATH = f'{os.getenv("HOME")}/app/openocd_adi' +TINYUSB_ROOT = os.path.dirname(os.path.dirname(os.path.dirname(os.path.abspath(__file__)))) # get usb serial by id def get_serial_dev(id, vendor_str, product_str, ifnum): @@ -83,7 +104,7 @@ def open_serial_dev(port): # slight delay since kernel may occupy the port briefly time.sleep(0.5) timeout = timeout - 0.5 - ser = serial.Serial(port, timeout=5) + ser = serial.Serial(port, baudrate=115200, timeout=5) break except serial.SerialException: pass @@ -137,103 +158,158 @@ def run_cmd(cmd, cwd=None): def flash_jlink(board, firmware): + flasher = board['flasher'] script = ['halt', 'r', f'loadfile {firmware}.elf', 'r', 'go', 'exit'] f_jlink = f'{board["name"]}_{os.path.basename(firmware)}.jlink' with open(f_jlink, 'w') as f: f.writelines(f'{s}\n' for s in script) - ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') + ret = run_cmd(f'JLinkExe -USB {flasher["uid"]} {flasher["args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') os.remove(f_jlink) return ret -def flash_stlink(board, firmware): - ret = run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --write {firmware}.elf --go') +def reset_jlink(board): + flasher = board['flasher'] + script = ['halt', 'r', 'go', 'exit'] + f_jlink = f'{board["name"]}_reset.jlink' + if not os.path.exists(f_jlink): + with open(f_jlink, 'w') as f: + f.writelines(f'{s}\n' for s in script) + ret = run_cmd(f'JLinkExe -USB {flasher["uid"]} {flasher["args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') return ret +def flash_stlink(board, firmware): + flasher = board['flasher'] + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={flasher["uid"]} --write {firmware}.elf --go') + + +def reset_stlink(board): + flasher = board['flasher'] + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={flasher["uid"]} --rst --go') + def flash_stflash(board, firmware): - ret = run_cmd(f'st-flash --serial {board["flasher_sn"]} write {firmware}.bin 0x8000000') + flasher = board['flasher'] + ret = run_cmd(f'st-flash --serial {flasher["uid"]} write {firmware}.bin 0x8000000') return ret +def reset_stflash(board): + flasher = board['flasher'] + return subprocess.CompletedProcess(args=['dummy'], returncode=0) + + def flash_openocd(board, firmware): - ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware}.elf reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'openocd -c "tcl_port disabled" -c "gdb_port disabled" -c "adapter serial {flasher["uid"]}" ' + f'{flasher["args"]} -c init -c halt -c "program {firmware}.elf verify" -c reset -c exit') return ret -def flash_openocd_wch(board, firmware): - # Content of the wch-riscv.cfg file - cfg_content = """ -adapter driver wlinke -adapter speed 6000 -transport select sdi +def reset_openocd(board): + flasher = board['flasher'] + ret = run_cmd(f'openocd -c "tcl_port disabled" -c "gdb_port disabled" -c "adapter serial {flasher["uid"]}" ' + f'{flasher["args"]} -c "reset exit"') + return ret -wlink_set_address 0x00000000 -set _CHIPNAME wch_riscv -sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 -set _TARGETNAME $_CHIPNAME.cpu +def flash_openocd_wch(board, firmware): + flasher = board['flasher'] + f_wch = f"wch-riscv_{board['uid']}.cfg" + if not os.path.exists(f_wch): + with open(f_wch, 'w') as file: + file.write(WCH_RISCV_CONTENT) -target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME -$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 -set _FLASHNAME $_CHIPNAME.flash + ret = run_cmd(f'openocd_wch -c "adapter serial {flasher["uid"]}" -f {f_wch} ' + f'-c "program {firmware}.elf reset exit"') + return ret -flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 -echo "Ready for Remote Connections" -""" +def reset_openocd_wch(board): + flasher = board['flasher'] f_wch = f"wch-riscv_{board['uid']}.cfg" if not os.path.exists(f_wch): with open(f_wch, 'w') as file: - file.write(cfg_content) + file.write(WCH_RISCV_CONTENT) - ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} ' - f'-c "program {firmware}.elf reset exit"') + ret = run_cmd(f'openocd_wch -c "adapter serial {flasher["uid"]}" -f {f_wch} -c "program reset exit"') return ret def flash_openocd_adi(board, firmware): - ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl ' - f'{board["flasher_args"]} -c "program {firmware}.elf reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {flasher["uid"]}" -s {OPENCOD_ADI_PATH}/tcl ' + f'{flasher["args"]} -c "program {firmware}.elf reset exit"') return ret + +def reset_openocd_adi(board): + flasher = board['flasher'] + ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {flasher["uid"]}" -s {OPENCOD_ADI_PATH}/tcl ' + f'{flasher["args"]} -c "program reset exit"') + return ret + + def flash_wlink_rs(board, firmware): + flasher = board['flasher'] # wlink use index for probe selection and lacking usb serial support ret = run_cmd(f'wlink flash {firmware}.elf') return ret +def reset_wlink_rs(board): + flasher = board['flasher'] + # wlink use index for probe selection and lacking usb serial support + ret = run_cmd(f'wlink reset') + return ret + + def flash_esptool(board, firmware): - port = get_serial_dev(board["flasher_sn"], None, None, 0) + flasher = board['flasher'] + port = get_serial_dev(flasher["uid"], None, None, 0) fw_dir = os.path.dirname(f'{firmware}.bin') with open(f'{fw_dir}/config.env') as f: idf_target = json.load(f)['IDF_TARGET'] with open(f'{fw_dir}/flash_args') as f: flash_args = f.read().strip().replace('\n', ' ') - command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} ' + command = (f'esptool.py --chip {idf_target} -p {port} {flasher["args"]} ' f'--before=default_reset --after=hard_reset write_flash {flash_args}') ret = run_cmd(command, cwd=fw_dir) return ret +def reset_esptool(board): + flasher = board['flasher'] + return subprocess.CompletedProcess(args=['dummy'], returncode=0) + + def flash_uniflash(board, firmware): - ret = run_cmd(f'dslite.sh {board["flasher_args"]} -f {firmware}.hex') + flasher = board['flasher'] + ret = run_cmd(f'dslite.sh {flasher["args"]} -f {firmware}.hex') return ret +def reset_uniflash(board): + flasher = board['flasher'] + return subprocess.CompletedProcess(args=['dummy'], returncode=0) + + # ------------------------------------------------------------- # Tests: dual # ------------------------------------------------------------- - def test_dual_host_info_to_device_cdc(board): uid = board['uid'] - declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dual_attached']] - + declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) ser = open_serial_dev(port) + # read from cdc, first line should contain vid/pid and serial data = ser.read(1000) + ser.close() + if len(data) == 0: + assert False, 'No data from device' lines = data.decode('utf-8').splitlines() + enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -242,12 +318,42 @@ def test_dual_host_info_to_device_cdc(board): enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') if set(declared_devs) != set(enum_dev_sn): - # for pico/pico2 make this test optional - failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' - if 'raspberry_pi_pico' in board['name']: - print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') - else: - assert False, failed_msg + failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + assert False, failed_msg + return 0 + + +# ------------------------------------------------------------- +# Tests: host +# ------------------------------------------------------------- +def test_host_device_info(board): + flasher = board['flasher'] + declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] + + port = get_serial_dev(flasher["uid"], None, None, 0) + ser = open_serial_dev(port) + + # reset device since we can miss the first line + ret = globals()[f'reset_{flasher["name"].lower()}'](board) + assert ret.returncode == 0, 'Failed to reset device' + + data = ser.read(1000) + ser.close() + if len(data) == 0: + assert False, 'No data from device' + + lines = data.decode('utf-8').splitlines() + enum_dev_sn = [] + for l in lines: + vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) + if vid_pid_sn: + print(f'\r\n {l} ', end='') + enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') + + if set(declared_devs) != set(enum_dev_sn): + failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + assert False, failed_msg + return 0 @@ -261,24 +367,24 @@ def test_device_board_test(board): def test_device_cdc_dual_ports(board): uid = board['uid'] - port1 = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) - port2 = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 2) - - ser1 = open_serial_dev(port1) - ser2 = open_serial_dev(port2) + port = [ + get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0), + get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 2) + ] + ser = [open_serial_dev(p) for p in port] - # Echo test - str1 = b"test_no1" - ser1.write(str1) - ser1.flush() - assert ser1.read(len(str1)) == str1.lower(), 'Port1 wrong data' - assert ser2.read(len(str1)) == str1.upper(), 'Port2 wrong data' - - str2 = b"test_no2" - ser2.write(str2) - ser2.flush() - assert ser1.read(len(str2)) == str2.lower(), 'Port1 wrong data' - assert ser2.read(len(str2)) == str2.upper(), 'Port2 wrong data' + str_test = [ b"test_no1", b"test_no2" ] + # Echo test write to each port and read back + for i in range(len(str_test)): + s = str_test[i] + l = len(s) + ser[i].write(s) + ser[i].flush() + rd = [ ser[i].read(l) for i in range(len(ser)) ] + assert rd[0] == s.lower(), f'Port1 wrong data: expected {s.lower()} was {rd[0]}' + assert rd[1] == s.upper(), f'Port2 wrong data: expected {s.upper()} was {rd[1]}' + ser[0].close() + ser[1].close() def test_device_cdc_msc(board): @@ -287,10 +393,12 @@ def test_device_cdc_msc(board): port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) ser = open_serial_dev(port) - str = b"test_str" - ser.write(str) + test_str = b"test_str" + ser.write(test_str) ser.flush() - assert ser.read(len(str)) == str, 'CDC wrong data' + rd_str = ser.read(len(test_str)) + ser.close() + assert rd_str == test_str, f'CDC wrong data: expected: {test_str} was {rd_str}' # Block test data = read_disk_file(uid,0,'README.TXT') @@ -388,12 +496,13 @@ def test_device_hid_composite_freertos(id): # Main # ------------------------------------------------------------- # device tests +# note don't test 2 examples with cdc or 2 msc next to each other device_tests = [ 'device/cdc_dual_ports', - 'device/cdc_msc', 'device/dfu', - 'device/cdc_msc_freertos', # don't test 2 cdc_msc next to each other + 'device/cdc_msc', 'device/dfu_runtime', + 'device/cdc_msc_freertos', 'device/hid_boot_interface', ] @@ -401,18 +510,26 @@ dual_tests = [ 'dual/host_info_to_device_cdc', ] +host_test = [ + 'host/device_info', +] + def test_board(board): name = board['name'] - flasher = board['flasher'].lower() + flasher = board['flasher'] # default to all tests - test_list = list(device_tests) + test_list = [] if 'tests' in board: board_tests = board['tests'] - if 'dual_attached' in board_tests: + if 'device' in board_tests and board_tests['device'] == True: + test_list += list(device_tests) + if 'dual' in board_tests and board_tests['dual'] == True: test_list += dual_tests + if 'host' in board_tests and board_tests['host'] == True: + test_list += host_test if 'only' in board_tests: test_list = board_tests['only'] if 'skip' in board_tests: @@ -434,36 +551,42 @@ def test_board(board): if f1 != "": f1_str = '-' + f1.replace(' ', '-') for test in test_list: - fw_dir = f'cmake-build/cmake-build-{name}{f1_str}/{test}' + fw_dir = f'{TINYUSB_ROOT}/cmake-build/cmake-build-{name}{f1_str}/{test}' if not os.path.exists(fw_dir): - fw_dir = f'examples/cmake-build-{name}{f1_str}/{test}' + fw_dir = f'{TINYUSB_ROOT}/examples/cmake-build-{name}{f1_str}/{test}' fw_name = f'{fw_dir}/{os.path.basename(test)}' print(f'{name+f1_str:40} {test:30} ... ', end='') - if not os.path.exists(fw_dir): + if not os.path.exists(fw_dir) or not (os.path.exists(f'{fw_name}.elf') or os.path.exists(f'{fw_name}.bin')): print('Skip (no binary)') continue # flash firmware. It may fail randomly, retry a few times - for i in range(3): - ret = globals()[f'flash_{flasher}'](board, fw_name) + max_rety = 2 + for i in range(max_rety): + ret = globals()[f'flash_{flasher["name"].lower()}'](board, fw_name) if ret.returncode == 0: - break + try: + globals()[f'test_{test.replace("/", "_")}'](board) + print('OK') + break + except Exception as e: + if i == max_rety - 1: + err_count += 1 + print(STATUS_FAILED) + print(f' {e}') + else: + print() + print(f' Test failed: {e}, retry {i+1}') + time.sleep(1) else: print(f'Flashing failed, retry {i+1}') time.sleep(1) - if ret.returncode == 0: - try: - ret = globals()[f'test_{test.replace("/", "_")}'](board) - print('OK') - except Exception as e: - err_count += 1 - print(STATUS_FAILED) - print(f' {e}') - else: + if ret.returncode != 0: err_count += 1 print(f'Flash {STATUS_FAILED}') + return err_count diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 2313f5d13..c15daf1d9 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -1,6 +1,19 @@ { "boards": [ { + "name": "espressif_p4_function_ev", + "uid": "6055F9F98715", + "tests": { + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/device_info"], + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002427"}] + }, + "flasher": { + "name": "esptool", + "uid": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", + "args": "-b 1500000" + } + }, + { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", "build" : { @@ -9,95 +22,152 @@ "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] }, - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 1500000" + "flasher": { + "name": "esptool", + "uid": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "args": "-b 1500000" + } }, { "name": "feather_nrf52840_express", "uid": "1F0479CD0F764471", - "flasher": "jlink", - "flasher_sn": "000682804350", - "flasher_args": "-device nrf52840_xxaa" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "000682804350", + "args": "-device nrf52840_xxaa" + } }, { "name": "max32666fthr", "uid": "0C81464124010B20FF0A08CC2C", - "flasher": "openocd_adi", - "flasher_sn": "E6614C311B597D32", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "openocd_adi", + "uid": "E6614C311B597D32", + "args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + } }, { "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", - "flasher": "jlink", - "flasher_sn": "123456", - "flasher_args": "-device ATSAMD51J19", "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] + "device": true, "host": false, "dual": false, + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] + }, + "flasher": { + "name": "jlink", + "uid": "123456", + "args": "-device ATSAMD51J19" } }, { "name": "lpcxpresso11u37", "uid": "17121919", - "flasher": "jlink", - "flasher_sn": "000724441579", - "flasher_args": "-device LPC11U37/401" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "000724441579", + "args": "-device LPC11U37/401" + } }, { "name": "ra4m1_ek", "uid": "152E163038303131393346E46F26574B", "tests": { + "device": true, "host": false, "dual": false, "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] }, "comment": "MSC is slow to enumerated #2602", - "flasher": "jlink", - "flasher_sn": "000831174392", - "flasher_args": "-device R7FA4M1AB" + "flasher": { + "name": "jlink", + "uid": "000831174392", + "args": "-device R7FA4M1AB" + } }, { "name": "raspberry_pi_pico", "uid": "E6614C311B764A37", - "flasher": "openocd", - "flasher_sn": "E6614103E72C1D2F", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] + "device": true, "host": false, "dual": false, + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] + }, + "flasher": { + "name": "openocd", + "uid": "E6614103E72C1D2F", + "args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" } }, { "name": "raspberry_pi_pico2", "uid": "560AE75E1C7152C9", - "flasher": "openocd", - "flasher_sn": "E6633861A3978538", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] + "device": true, "host": false, "dual": false, + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] + }, + "flasher": { + "name": "openocd", + "uid": "E6633861A3978538", + "args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"" } }, { "name": "stm32f072disco", "uid": "3A001A001357364230353532", - "flasher": "jlink", - "flasher_sn": "779541626", - "flasher_args": "-device stm32f072rb" + "flasher": { + "name": "jlink", + "uid": "779541626", + "args": "-device stm32f072rb" + } }, { - "name": "stm32f407disco", - "uid": "30001A000647313332353735", + "name": "stm32f723disco", + "uid": "460029001951373031313335", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "tests": { + "device": true, "host": true, "dual": false, + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2003414"}] + }, + "flasher": { + "name": "jlink", + "uid": "000776606156", + "args": "-device stm32f723ie" + } + }, + { + "name": "stm32h743nucleo", + "uid": "110018000951383432343236", "build" : { "flags_on": ["", "CFG_TUD_DWC2_DMA"] }, - "flasher": "jlink", - "flasher_sn": "000773661813", - "flasher_args": "-device stm32f407vg" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "stlink", + "uid": "004C00343137510F39383538", + "args": "" + } }, { "name": "stm32g0b1nucleo", "uid": "4D0038000450434E37343120", - "flasher": "openocd", - "flasher_sn": "066FFF495087534867063844", - "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "openocd", + "uid": "066FFF495087534867063844", + "args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + } } ], "boards-skip": [ @@ -107,23 +177,50 @@ "build" : { "flags_on": ["", "CFG_TUD_DWC2_DMA"] }, - "flasher": "jlink", - "flasher_sn": "000778170924", - "flasher_args": "-device stm32f769ni" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "000778170924", + "args": "-device stm32f769ni" + } }, { "name": "mimxrt1015_evk", "uid": "DC28F865D2111D228D00B0543A70463C", - "flasher": "jlink", - "flasher_sn": "000726284213", - "flasher_args": "-device MIMXRT1015DAF5A" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "000726284213", + "args": "-device MIMXRT1015DAF5A" + } }, { "name": "nanoch32v203", "uid": "CDAB277B0FBC03E339E339E3", - "flasher": "openocd_wch", - "flasher_sn": "EBCA8F0670AF", - "flasher_args": "" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "openocd_wch", + "uid": "EBCA8F0670AF", + "args": "" + } + }, + { + "name": "stm32f407disco", + "uid": "30001A000647313332353735", + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "000773661813", + "args": "-device stm32f407vg" + } } ] } diff --git a/test/unit-test/test/device/msc/test_msc_device.c b/test/unit-test/test/device/msc/test_msc_device.c index f2a4fa295..55b690313 100644 --- a/test/unit-test/test/device/msc/test_msc_device.c +++ b/test/unit-test/test/device/msc/test_msc_device.c @@ -42,6 +42,10 @@ TEST_FILE("msc_device.c") // MACRO TYPEDEF CONSTANT ENUM DECLARATION //--------------------------------------------------------------------+ +uint32_t tusb_time_millis_api(void) { + return 0; +} + enum { EDPT_CTRL_OUT = 0x00, diff --git a/test/unit-test/test/device/usbd/test_usbd.c b/test/unit-test/test/device/usbd/test_usbd.c index 9879cd4ba..e7c6a8578 100644 --- a/test/unit-test/test/device/usbd/test_usbd.c +++ b/test/unit-test/test/device/usbd/test_usbd.c @@ -39,6 +39,10 @@ TEST_FILE("usbd_control.c") // MACRO TYPEDEF CONSTANT ENUM DECLARATION //--------------------------------------------------------------------+ +uint32_t tusb_time_millis_api(void) { + return 0; +} + enum { EDPT_CTRL_OUT = 0x00, diff --git a/tools/build.py b/tools/build.py index 91d4ebd30..48666adc4 100755 --- a/tools/build.py +++ b/tools/build.py @@ -68,6 +68,7 @@ def get_examples(family): if family == 'espressif': all_examples.append('device/board_test') all_examples.append('device/video_capture') + all_examples.append('host/device_info') all_examples.sort() return all_examples diff --git a/tools/build_utils.py b/tools/build_utils.py index 5462829e2..2998f940d 100755 --- a/tools/build_utils.py +++ b/tools/build_utils.py @@ -1,7 +1,7 @@ #!/usr/bin/env python3 import subprocess import pathlib -import time +import re build_format = '| {:29} | {:30} | {:18} | {:7} | {:6} | {:6} |' @@ -36,18 +36,21 @@ def skip_example(example, board): mk_contents = board_mk.read_text() mcu = "NONE" - for token in mk_contents.split(): - if "CFG_TUSB_MCU=OPT_MCU_" in token: - # Strip " because cmake files has them. - token = token.strip("\"") - _, opt_mcu = token.split("=") - mcu = opt_mcu[len("OPT_MCU_"):] - if "esp32s2" in token: - mcu = "ESP32S2" - if "esp32s3" in token: - mcu = "ESP32S3" - if mcu != "NONE": - break + if family == "espressif": + for line in mk_contents.splitlines(): + match = re.search(r'set\(IDF_TARGET\s+"([^"]+)"\)', line) + if match: + mcu = match.group(1).upper() + break + else: + for token in mk_contents.split(): + if "CFG_TUSB_MCU=OPT_MCU_" in token: + # Strip " because cmake files has them. + token = token.strip("\"") + _, opt_mcu = token.split("=") + mcu = opt_mcu[len("OPT_MCU_"):] + if mcu != "NONE": + break # Skip all OPT_MCU_NONE these are WIP port if mcu == "NONE": diff --git a/tools/get_deps.py b/tools/get_deps.py index 519cb1d53..6d0ef9d0c 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -121,6 +121,9 @@ deps_optional = { 'hw/mcu/st/cmsis_device_wb': ['https://github.com/STMicroelectronics/cmsis_device_wb.git', '9c5d1920dd9fabbe2548e10561d63db829bb744f', 'stm32wb'], + 'hw/mcu/st/stm32-mfxstm32l152': ['https://github.com/STMicroelectronics/stm32-mfxstm32l152.git', + '7f4389efee9c6a655b55e5df3fceef5586b35f9b', + 'stm32h7'], 'hw/mcu/st/stm32f0xx_hal_driver': ['https://github.com/STMicroelectronics/stm32f0xx_hal_driver.git', '0e95cd88657030f640a11e690a8a5186c7712ea5', 'stm32f0'], |