diff options
| author | hathach <[email protected]> | 2019-03-09 01:04:26 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2019-03-09 01:04:26 +0700 |
| commit | 0ff7d609f0268d4abcec9c6ba2f3e24104a3fd96 (patch) | |
| tree | 2d6ece0939636373e39070b5d68ce6d473c79888 | |
| parent | 57d069981fb3b2e18d282ecfb72ecbf2093bdebd (diff) | |
add flash target for stm32 board using stm32cubeprogammger cli
| -rw-r--r-- | examples/device/cdc_msc_hid/Makefile | 4 | ||||
| -rw-r--r-- | hw/bsp/stm32f407g_disc1/board.mk | 7 |
2 files changed, 10 insertions, 1 deletions
diff --git a/examples/device/cdc_msc_hid/Makefile b/examples/device/cdc_msc_hid/Makefile index 5d968e85c..a8430b4af 100644 --- a/examples/device/cdc_msc_hid/Makefile +++ b/examples/device/cdc_msc_hid/Makefile @@ -95,6 +95,8 @@ SRC_S := $(SRC_S:.S=.s) OBJ += $(addprefix $(BUILD)/obj/, $(SRC_C:.c=.o)) OBJ += $(addprefix $(BUILD)/obj/, $(SRC_S:.s=.o)) +# Set all as default goal +.DEFAULT_GOAL := all all: $(BUILD)/$(BOARD)-firmware.bin size OBJ_DIRS = $(sort $(dir $(OBJ))) @@ -108,7 +110,7 @@ $(BUILD)/$(BOARD)-firmware.elf: $(OBJ) $(BUILD)/$(BOARD)-firmware.bin: $(BUILD)/$(BOARD)-firmware.elf @echo CREATE $@ - $(OBJCOPY) -O binary -j .vectors -j .text -j .data $^ $@ + @$(OBJCOPY) -O binary -j .vectors -j .text -j .data $^ $@ # We set vpath to point to the top of the tree so that the source files # can be located. By following this scheme, it allows a single build rule diff --git a/hw/bsp/stm32f407g_disc1/board.mk b/hw/bsp/stm32f407g_disc1/board.mk index bc8396723..0fc35cee7 100644 --- a/hw/bsp/stm32f407g_disc1/board.mk +++ b/hw/bsp/stm32f407g_disc1/board.mk @@ -25,3 +25,10 @@ INC += \ VENDOR = st CHIP_FAMILY = stm32f4 + +# Path to STM32 Cube Programmer CLI +STM32Prog = STM32_Programmer_CLI + +# flash target to download +flash: $(BUILD)/$(BOARD)-firmware.elf + $(STM32Prog) --connect port=swd --write $< --go |