diff options
| author | hathach <[email protected]> | 2026-03-10 17:16:47 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2026-03-10 17:16:47 +0700 |
| commit | 131a078821db3f4cd0e2dbab09bbb4633046228d (patch) | |
| tree | a56411f3ceab174c476508f38478914f0908f47a | |
| parent | e658e2343589d2f37afbf62c0a6766038739b84d (diff) | |
update lpc55 bsp to use mcx config tool, move led/button/uart and usb port power to generated pinmux
42 files changed, 13163 insertions, 242 deletions
diff --git a/hw/bsp/lpc55/boards/double_m33_express/board.h b/hw/bsp/lpc55/boards/double_m33_express/board.h index dc11e47fc..fec7e9067 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/board.h +++ b/hw/bsp/lpc55/boards/double_m33_express/board.h @@ -37,26 +37,17 @@ #endif // LED -#define LED_PORT 0 -#define LED_PIN 1 +#define LED_PORT BOARD_INITLEDSPINS_LED_PORT +#define LED_PIN BOARD_INITLEDSPINS_LED_PIN #define LED_STATE_ON 1 // WAKE button -#define BUTTON_PORT 0 -#define BUTTON_PIN 5 +#define BUTTON_PORT BOARD_INITBUTTONSPINS_S1_PORT +#define BUTTON_PIN BOARD_INITBUTTONSPINS_S1_PIN #define BUTTON_STATE_ACTIVE 0 -// Number of neopixels -#define NEOPIXEL_NUMBER 2 -#define NEOPIXEL_PORT 0 -#define NEOPIXEL_PIN 27 -#define NEOPIXEL_CH 6 -#define NEOPIXEL_TYPE 0 - // UART #define UART_DEV USART0 -#define UART_RX_PINMUX 0U, 29U, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0U, 30U, IOCON_PIO_DIG_FUNC1_EN // XTAL #define XTAL0_CLK_HZ (16 * 1000 * 1000U) diff --git a/hw/bsp/lpc55/boards/double_m33_express/board.mk b/hw/bsp/lpc55/boards/double_m33_express/board.mk index d28700ca7..c0282686f 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/board.mk +++ b/hw/bsp/lpc55/boards/double_m33_express/board.mk @@ -1,10 +1,17 @@ MCU_VARIANT = LPC55S69 MCU_CORE = LPC55S69_cm33_core0 -PORT ?= 1 +RHPORT_DEVICE ?= 1 CFLAGS += -DCPU_LPC55S69JBD100_cm33_core0 LD_FILE = $(BOARD_PATH)/LPC55S69_cm33_core0_uf2.ld +SRC_C += \ + $(TOP)/$(BOARD_PATH)/board/clock_config.c \ + $(TOP)/$(BOARD_PATH)/board/pin_mux.c \ + $(TOP)/$(BOARD_PATH)/board/peripherals.c + +INC += $(TOP)/$(BOARD_PATH)/board + JLINK_DEVICE = LPC55S69 PYOCD_TARGET = LPC55S69 diff --git a/hw/bsp/lpc55/boards/double_m33_express/board/clock_config.c b/hw/bsp/lpc55/boards/double_m33_express/board/clock_config.c new file mode 100644 index 000000000..99a738f18 --- /dev/null +++ b/hw/bsp/lpc55/boards/double_m33_express/board/clock_config.c @@ -0,0 +1,328 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to set up clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v18.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S69 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_power.h" +#include "fsl_clock.h" +#include "clock_config.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockPLL150M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: System_clock.outFreq, value: 12 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF96M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFROHF96M +outputs: +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable} +- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk} +sources: +- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +void BOARD_BootClockFROHF96M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */ + + POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL100M +outputs: +- {id: System_clock.outFreq, value: 100 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +void BOARD_BootClockPLL100M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + + POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U), + .pllndec = SYSCON_PLL0NDEC_NDIV(4U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(2U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 100000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL150M +called_from_default_init: true +outputs: +- {id: FXCOM0_clock.outFreq, value: 48 MHz} +- {id: System_clock.outFreq, value: 144 MHz} +- {id: USB0_clock.outFreq, value: 48 MHz} +- {id: USB1_PHY_clock.outFreq, value: 16 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: PLL1_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_PLL_USB_OUT, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.FCCLKSEL0.sel, value: SYSCON.PLL0DIV} +- {id: SYSCON.FRGCTRL0_DIV.scale, value: '400'} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL1_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0DIV.scale, value: '2'} +- {id: SYSCON.PLL0M_MULT.scale, value: '150', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '8', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '2', locked: true} +- {id: SYSCON.PLL1CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL1M_MULT.scale, value: '18'} +- {id: SYSCON.PLL1_PDEC.scale, value: '2'} +- {id: SYSCON.USB0CLKDIV.scale, value: '3'} +- {id: SYSCON.USB0CLKSEL.sel, value: SYSCON.MAINCLKSELB} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +void BOARD_BootClockPLL150M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_PLL_USB_OUT_MASK; /* Enable clk_in to HS USB */ + + POWER_SetVoltageForFreq(144000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(144000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(31U), + .pllndec = SYSCON_PLL0NDEC_NDIV(8U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(1U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(150U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 150000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up PLL1 */ + CLOCK_AttachClk(kEXT_CLK_to_PLL1); /*!< Switch PLL1CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL1); /* Ensure PLL is on */ + const pll_setup_t pll1Setup = { + .pllctrl = SYSCON_PLL1CTRL_CLKEN_MASK | SYSCON_PLL1CTRL_SELI(11U) | SYSCON_PLL1CTRL_SELP(5U), + .pllndec = SYSCON_PLL1NDEC_NDIV(1U), + .pllpdec = SYSCON_PLL1PDEC_PDIV(1U), + .pllmdec = SYSCON_PLL1MDEC_MDIV(18U), + .pllRate = 144000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */ + + /*!< Set up dividers */ + #if FSL_CLOCK_DRIVER_VERSION >= MAKE_VERSION(2, 3, 4) + CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 144U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */ + #else + CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 37120U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */ + #endif + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 0U, true); /*!< Reset USB0CLKDIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 3U, false); /*!< Set USB0CLKDIV divider to value 3 */ + CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 0U, true); /*!< Reset PLL0DIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 2U, false); /*!< Set PLL0DIV divider to value 2 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */ + CLOCK_AttachClk(kMAIN_CLK_to_USB0_CLK); /*!< Switch USB0_CLK to MAIN_CLK */ + CLOCK_AttachClk(kPLL0_DIV_to_FLEXCOMM0); /*!< Switch FLEXCOMM0 to PLL0_DIV */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK; +#endif +} diff --git a/hw/bsp/lpc55/boards/double_m33_express/board/clock_config.h b/hw/bsp/lpc55/boards/double_m33_express/board/clock_config.h new file mode 100644 index 000000000..9112ede78 --- /dev/null +++ b/hw/bsp/lpc55/boards/double_m33_express/board/clock_config.h @@ -0,0 +1,290 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal frequency in Hz */ +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO12M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKFRO12M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKFRO12M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFRO12M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKFRO12M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKFRO12M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKFRO12M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKFRO12M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO12M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF96M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFROHF96M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFROHF96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKFROHF96M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKFROHF96M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFROHF96M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKFROHF96M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKFROHF96M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKFROHF96M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFROHF96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKFROHF96M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFROHF96M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFROHF96M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFROHF96M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKPLL100M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKPLL100M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKPLL100M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKPLL100M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL100M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKPLL100M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKPLL100M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKPLL100M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SYSTEM_CLOCK 100000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKPLL100M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKPLL100M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKPLL100M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL100M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKPLL100M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL100M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK 144000000U /*!< Core clock frequency: 144000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKPLL150M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKPLL150M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM0_CLOCK 48000000UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKPLL150M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKPLL150M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL150M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKPLL150M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKPLL150M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKPLL150M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SYSTEM_CLOCK 144000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKPLL150M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKPLL150M_USB0_CLOCK 48000000UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKPLL150M_USB1_PHY_CLOCK 16000000UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL150M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKPLL150M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL150M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/lpc55/boards/double_m33_express/board/peripherals.c b/hw/bsp/lpc55/boards/double_m33_express/board/peripherals.c new file mode 100644 index 000000000..890a20fc6 --- /dev/null +++ b/hw/bsp/lpc55/boards/double_m33_express/board/peripherals.c @@ -0,0 +1,160 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Peripherals v15.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S69 +functionalGroups: +- name: BOARD_InitPeripherals_cm33_core0 + UUID: 61d0725d-b300-49cb-9c66-b5edfbf8ffc1 + called_from_default_init: true + selectedCore: cm33_core0 +- name: BOARD_InitPeripherals_cm33_core1 + UUID: e2041cd4-ebb6-45a5-807f-e0c2dc047d48 + selectedCore: cm33_core1 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'system' +- type_id: 'system' +- global_system_definitions: + - user_definitions: '' + - user_includes: '' + - global_init: '' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'uart_cmsis_common' +- type_id: 'uart_cmsis_common' +- global_USART_CMSIS_common: + - quick_selection: 'default' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'gpio_adapter_common' +- type_id: 'gpio_adapter_common' +- global_gpio_adapter_common: + - quick_selection: 'default' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/*********************************************************************************************************************** + * Included files + **********************************************************************************************************************/ +#include "peripherals.h" + +/*********************************************************************************************************************** + * BOARD_InitPeripherals_cm33_core0 functional group + **********************************************************************************************************************/ +/*********************************************************************************************************************** + * DEBUG_UART initialization code + **********************************************************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +instance: +- name: 'DEBUG_UART' +- type: 'flexcomm_usart' +- mode: 'polling' +- custom_name_enabled: 'true' +- type_id: 'flexcomm_usart_2.2.0' +- functional_group: 'BOARD_InitPeripherals_cm33_core0' +- peripheral: 'FLEXCOMM0' +- config_sets: + - usartConfig_t: + - usartConfig: + - clockSource: 'FXCOMFunctionClock' + - clockSourceFreq: 'ClocksTool_DefaultInit' + - baudRate_Bps: '115200' + - syncMode: 'kUSART_SyncModeDisabled' + - parityMode: 'kUSART_ParityDisabled' + - stopBitCount: 'kUSART_OneStopBit' + - bitCountPerChar: 'kUSART_8BitsPerChar' + - loopback: 'false' + - txWatermark: 'kUSART_TxFifo0' + - rxWatermark: 'kUSART_RxFifo1' + - enableRx: 'true' + - enableTx: 'true' + - clockPolarity: 'kUSART_RxSampleOnFallingEdge' + - enableContinuousSCLK: 'false' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ +const usart_config_t DEBUG_UART_config = { + .baudRate_Bps = 115200UL, + .syncMode = kUSART_SyncModeDisabled, + .parityMode = kUSART_ParityDisabled, + .stopBitCount = kUSART_OneStopBit, + .bitCountPerChar = kUSART_8BitsPerChar, + .loopback = false, + .txWatermark = kUSART_TxFifo0, + .rxWatermark = kUSART_RxFifo1, + .enableRx = true, + .enableTx = true, + .enableMode32k = false, + .clockPolarity = kUSART_RxSampleOnFallingEdge, + .enableContinuousSCLK = false +}; + +static void DEBUG_UART_init(void) { + /* Reset FLEXCOMM device */ + RESET_PeripheralReset(kFC0_RST_SHIFT_RSTn); + USART_Init(DEBUG_UART_PERIPHERAL, &DEBUG_UART_config, DEBUG_UART_CLOCK_SOURCE); +} + +/*********************************************************************************************************************** + * NVIC initialization code + **********************************************************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +instance: +- name: 'NVIC' +- type: 'nvic' +- mode: 'general' +- custom_name_enabled: 'false' +- type_id: 'nvic' +- functional_group: 'BOARD_InitPeripherals_cm33_core0' +- peripheral: 'NVIC' +- config_sets: + - nvic: + - interrupt_table: [] + - interrupts: [] + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/* Empty initialization function (commented out) +static void NVIC_init(void) { +} */ + +/*********************************************************************************************************************** + * Initialization functions + **********************************************************************************************************************/ +void BOARD_InitPeripherals_cm33_core0(void) +{ + /* Initialize components */ + DEBUG_UART_init(); +} + +/*********************************************************************************************************************** + * BOARD_InitBootPeripherals function + **********************************************************************************************************************/ +void BOARD_InitBootPeripherals(void) +{ + BOARD_InitPeripherals_cm33_core0(); +} diff --git a/hw/bsp/lpc55/boards/double_m33_express/board/peripherals.h b/hw/bsp/lpc55/boards/double_m33_express/board/peripherals.h new file mode 100644 index 000000000..fc4d72c33 --- /dev/null +++ b/hw/bsp/lpc55/boards/double_m33_express/board/peripherals.h @@ -0,0 +1,57 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PERIPHERALS_H_ +#define _PERIPHERALS_H_ + +/*********************************************************************************************************************** + * Included files + **********************************************************************************************************************/ +#include "fsl_common.h" +#include "fsl_reset.h" +#include "fsl_usart.h" +#include "fsl_clock.h" + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ +/* Definitions for BOARD_InitPeripherals_cm33_core0 functional group */ +/* Definition of peripheral ID */ +#define DEBUG_UART_PERIPHERAL ((USART_Type *)FLEXCOMM0) +/* Definition of the clock source frequency */ +#define DEBUG_UART_CLOCK_SOURCE 48000000UL + +/*********************************************************************************************************************** + * Global variables + **********************************************************************************************************************/ +extern const usart_config_t DEBUG_UART_config; + +/*********************************************************************************************************************** + * Initialization functions + **********************************************************************************************************************/ + +void BOARD_InitPeripherals_cm33_core0(void); + +/*********************************************************************************************************************** + * BOARD_InitBootPeripherals function + **********************************************************************************************************************/ +void BOARD_InitBootPeripherals(void); + +#if defined(__cplusplus) +} +#endif + +#endif /* _PERIPHERALS_H_ */ diff --git a/hw/bsp/lpc55/boards/double_m33_express/board/pin_mux.c b/hw/bsp/lpc55/boards/double_m33_express/board/pin_mux.c new file mode 100644 index 000000000..16e112dfc --- /dev/null +++ b/hw/bsp/lpc55/boards/double_m33_express/board/pin_mux.c @@ -0,0 +1,736 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v17.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S69 +pin_labels: +- {pin_num: '7', pin_signal: PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1, label: 'P18[2]/SD1_CLK', identifier: LED} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_gpio.h" +#include "fsl_iocon.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitDEBUG_UARTPins(); + BOARD_InitUSBPins(); + BOARD_InitLEDsPins(); + BOARD_InitBUTTONsPins(); + BOARD_InitPins_Core0(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive, + slew_rate: standard, invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitDEBUG_UARTPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t DEBUG_UART_RX = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, DEBUG_UART_RX); + + const uint32_t DEBUG_UART_TX = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, DEBUG_UART_TX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSWD_DEBUGPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '13', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9, mode: pullDown, + slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '12', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '21', peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, identifier: DEBUG_SWD_SWO, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSWD_DEBUGPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitSWD_DEBUGPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t DEBUG_SWD_SWO = (/* Pin is configured as SWO */ + IOCON_PIO_FUNC6 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is open (disabled) */ + IOCON_PIO_ASW_DI); + /* PORT0 PIN10 (coords: 21) is configured as SWO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN, DEBUG_SWD_SWO); + + if (Chip_GetVersion()==1) + { + const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */ + IOCON_PIO_FUNC6 | + /* Selects pull-down function */ + IOCON_PIO_MODE_PULLDOWN | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN11 (coords: 13) is configured as SWCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK); + } + else + { + const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */ + IOCON_PIO_FUNC6 | + /* Selects pull-down function */ + IOCON_PIO_MODE_PULLDOWN | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled), only for A0 version */ + IOCON_PIO_ASW_DIS_EN); + /* PORT0 PIN11 (coords: 13) is configured as SWCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK); + } + + if (Chip_GetVersion()==1) + { + const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */ + IOCON_PIO_FUNC6 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN12 (coords: 12) is configured as SWDIO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO); + } + else + { + const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */ + IOCON_PIO_FUNC6 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled), only for A0 version */ + IOCON_PIO_ASW_DIS_EN); + /* PORT0 PIN12 (coords: 12) is configured as SWDIO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO); + } +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSBPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '97', peripheral: USBFSH, signal: USB_DP, pin_signal: USB0_DP} + - {pin_num: '98', peripheral: USBFSH, signal: USB_DM, pin_signal: USB0_DM} + - {pin_num: '78', peripheral: USBFSH, signal: USB_VBUS, pin_signal: PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '35', peripheral: USBHSH, signal: USB_DM, pin_signal: USB1_DM} + - {pin_num: '34', peripheral: USBHSH, signal: USB_DP, pin_signal: USB1_DP} + - {pin_num: '36', peripheral: USBHSH, signal: USB_VBUS, pin_signal: USB1_VBUS} + - {pin_num: '65', peripheral: USBHSH, signal: USB_OVERCURRENTN, pin_signal: PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1, mode: pullUp} + - {pin_num: '66', peripheral: USBFSH, signal: USB_OVERCURRENTN, pin_signal: PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28, + mode: pullUp} + - {pin_num: '67', peripheral: USBFSH, signal: USB_PORTPWRN, pin_signal: PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2, mode: pullUp} + - {pin_num: '80', peripheral: USBHSH, signal: USB_PORTPWRN, pin_signal: PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2, mode: pullUp} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSBPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitUSBPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t USB0_VBUS = (/* Pin is configured as USB0_VBUS */ + IOCON_PIO_FUNC7 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN22 (coords: 78) is configured as USB0_VBUS */ + IOCON_PinMuxSet(IOCON, BOARD_INITUSBPINS_USB0_VBUS_PORT, BOARD_INITUSBPINS_USB0_VBUS_PIN, USB0_VBUS); + + IOCON->PIO[0][28] = ((IOCON->PIO[0][28] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT028 (pin 66) is configured as USB0_OVERCURRENTN. */ + | IOCON_PIO_FUNC(PIO0_28_FUNC_ALT7) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO0_28_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO0_28_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][12] = ((IOCON->PIO[1][12] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT112 (pin 67) is configured as USB0_PORTPWRN. */ + | IOCON_PIO_FUNC(PIO1_12_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_12_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_12_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][29] = ((IOCON->PIO[1][29] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT129 (pin 80) is configured as USB1_PORTPWRN. */ + | IOCON_PIO_FUNC(PIO1_29_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_29_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_29_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][30] = ((IOCON->PIO[1][30] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT130 (pin 65) is configured as USB1_OVERCURRENTN. */ + | IOCON_PIO_FUNC(PIO1_30_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_30_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_30_DIGIMODE_DIGITAL)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLEDsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '7', peripheral: GPIO, signal: 'PIO0, 1', pin_signal: PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1, direction: OUTPUT} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLEDsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitLEDsPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO0 module */ + CLOCK_EnableClock(kCLOCK_Gpio0); + + gpio_pin_config_t LED_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO0_1 (pin 7) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_GPIO, BOARD_INITLEDSPINS_LED_PORT, BOARD_INITLEDSPINS_LED_PIN, &LED_config); + + IOCON->PIO[0][1] = ((IOCON->PIO[0][1] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT01 (pin 7) is configured as PIO0_1. */ + | IOCON_PIO_FUNC(PIO0_1_FUNC_ALT0) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO0_1_DIGIMODE_DIGITAL)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitBUTTONsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '88', peripheral: GPIO, signal: 'PIO0, 5', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, direction: INPUT, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '32', peripheral: SYSCON, signal: RESET, pin_signal: RESETN} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBUTTONsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitBUTTONsPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO0 module */ + CLOCK_EnableClock(kCLOCK_Gpio0); + + gpio_pin_config_t S1_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO0_5 (pin 88) */ + GPIO_PinInit(BOARD_INITBUTTONSPINS_S1_GPIO, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, &S1_config); + + const uint32_t S1 = (/* Pin is configured as PIO0_5 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN5 (coords: 88) is configured as PIO0_5 */ + IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, S1); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins_Core0: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: [] + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins_Core0 + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitPins_Core0(void) +{ +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitI2SPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp, + slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, mode: inactive, slew_rate: standard, invert: disabled, + open_drain: disabled} + - {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '21', peripheral: FLEXCOMM6, signal: SCK, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, + identifier: FC6_I2S_CLK, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '87', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitI2SPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitI2SPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t FC6_I2S_CLK = (/* Pin is configured as FC6_SCK */ + IOCON_PIO_FUNC1 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN10 (coords: 21) is configured as FC6_SCK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_CLK_PORT, BOARD_INITI2SPINS_FC6_I2S_CLK_PIN, FC6_I2S_CLK); + + const uint32_t FC7_I2S_WS = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_WS_PORT, BOARD_INITI2SPINS_FC7_I2S_WS_PIN, FC7_I2S_WS); + + const uint32_t FC7_I2S_TX = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_TX_PORT, BOARD_INITI2SPINS_FC7_I2S_TX_PIN, FC7_I2S_TX); + + const uint32_t FC7_I2S_SCK = (/* Pin is configured as FC7_SCK */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_SCK_PORT, BOARD_INITI2SPINS_FC7_I2S_SCK_PIN, FC7_I2S_SCK); + + const uint32_t FC6_I2S_RX = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC2 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_RX_PORT, BOARD_INITI2SPINS_FC6_I2S_RX_PIN, FC6_I2S_RX); + + const uint32_t FC6_I2S_WS = (/* Pin is configured as FC6_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC2 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN16 (coords: 87) is configured as FC6_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_WS_PORT, BOARD_INITI2SPINS_FC6_I2S_WS_PIN, FC6_I2S_WS); + + const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SCL_PORT, BOARD_INITI2SPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL); + + const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SDA_PORT, BOARD_INITI2SPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA); + + const uint32_t MCLK = (/* Pin is configured as MCLK */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN31 (coords: 91) is configured as MCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_MCLK_PORT, BOARD_INITI2SPINS_MCLK_PIN, MCLK); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitACCELPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp, + slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '58', peripheral: GPIO, signal: 'PIO1, 19', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF, direction: INPUT, mode: inactive, + slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitACCELPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitACCELPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO1 module */ + CLOCK_EnableClock(kCLOCK_Gpio1); + + gpio_pin_config_t ACCL_INTR_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO1_19 (pin 58) */ + GPIO_PinInit(BOARD_INITACCELPINS_ACCL_INTR_GPIO, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, &ACCL_INTR_config); + + const uint32_t ACCL_INTR = (/* Pin is configured as PIO1_19 */ + IOCON_PIO_FUNC0 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is open (disabled) */ + IOCON_PIO_ASW_DI); + /* PORT1 PIN19 (coords: 58) is configured as PIO1_19 */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, ACCL_INTR); + + const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SCL_PORT, BOARD_INITACCELPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL); + + const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SDA_PORT, BOARD_INITACCELPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/lpc55/boards/double_m33_express/board/pin_mux.h b/hw/bsp/lpc55/boards/double_m33_express/board/pin_mux.h new file mode 100644 index 000000000..33f000d0a --- /dev/null +++ b/hw/bsp/lpc55/boards/double_m33_express/board/pin_mux.h @@ -0,0 +1,383 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_29 (number 92), P8[2]/U6[13]/FC0_USART_RXD + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 29U +/*! + * @brief PORT pin mask */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 29U) +/* @} */ + +/*! @name PIO0_30 (number 94), P8[3]/U6[12]/FC0_USART_TXD + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 30U +/*! + * @brief PORT pin mask */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 30U) +/* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */ +#define IOCON_PIO_ASW_DIS_EN 0x00u /*!<@brief Analog switch is closed (enabled), only for A0 version */ +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC6 0x06u /*!<@brief Selects pin function 6 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLDOWN 0x10u /*!<@brief Selects pull-down function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_11 (number 13), U14[4]/SWDCLK_TRGT + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 11U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 11U) +/* @} */ + +/*! @name PIO0_12 (number 12), U15[4]/D7/P7[2]/IF_SWDIO + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 12U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 12U) +/* @} */ + +/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN 10U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN_MASK (1U << 10U) +/* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Enables digital function */ +#define IOCON_PIO_DIGITAL_EN 0x0100u +/*! + * @brief Selects pin function 7 */ +#define IOCON_PIO_FUNC7 0x07u +/*! + * @brief Input function is not inverted */ +#define IOCON_PIO_INV_DI 0x00u +/*! + * @brief No addition pin function */ +#define IOCON_PIO_MODE_INACT 0x00u +/*! + * @brief Open drain is disabled */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u +/*! + * @brief Standard mode, output slew rate control is enabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO0_28_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 7. */ +#define PIO0_28_FUNC_ALT7 0x07u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO0_28_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_12_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_12_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_12_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_29_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_29_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_29_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_30_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_30_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_30_MODE_PULL_UP 0x02u + +/*! @name PIO0_22 (number 78), P10[1]/USB0_VBUS + @{ */ +#define BOARD_INITUSBPINS_USB0_VBUS_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITUSBPINS_USB0_VBUS_PIN 22U /*!<@brief PORT pin number */ +#define BOARD_INITUSBPINS_USB0_VBUS_PIN_MASK (1U << 22U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSBPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define PIO0_1_DIGIMODE_DIGITAL 0x01u /*!<@brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO0_1_FUNC_ALT0 0x00u /*!<@brief Selects pin function.: Alternative connection 0. */ + +/*! @name PIO0_1 (number 7), P18[2]/SD1_CLK + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_INIT_GPIO_VALUE 0U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_GPIO_PIN_MASK (1U << 1U) /*!<@brief GPIO pin mask */ +#define BOARD_INITLEDSPINS_LED_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_PIN 1U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_PIN_MASK (1U << 1U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLEDsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_5 (number 88), S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1 + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_S1_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S1_GPIO_PIN_MASK (1U << 5U) /*!<@brief GPIO pin mask */ +#define BOARD_INITBUTTONSPINS_S1_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S1_PIN 5U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_S1_PIN_MASK (1U << 5U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitBUTTONsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins_Core0(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_FUNC2 0x02u /*!<@brief Selects pin function 2 */ +#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */ +#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD + @{ */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD + @{ */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_31 (number 91), P19[7]/P19[8]/PLU_IN0/GPIO + @{ */ +#define BOARD_INITI2SPINS_MCLK_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_MCLK_PIN 31U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_MCLK_PIN_MASK (1U << 31U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_21 (number 76), P17[14]/FC7_I2S_SCK + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_20 (number 74), P17[10]/FC7_I2S_TX + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_19 (number 90), P17[12]/FC7_I2S_WS + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN 19U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN 10U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN_MASK (1U << 10U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_13 (number 2), P17[20]/FC6_I2S_RX + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN 13U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_16 (number 87), P18[17]/SD1_PWR_EN + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN 16U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN_MASK (1U << 16U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitI2SPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */ +#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD + @{ */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD + @{ */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_19 (number 58), U7[3]/P18[14]/PLU_OUT1/GPIO + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITACCELPINS_ACCL_INTR_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITACCELPINS_ACCL_INTR_GPIO_PIN_MASK (1U << 19U) /*!<@brief GPIO pin mask */ +#define BOARD_INITACCELPINS_ACCL_INTR_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_ACCL_INTR_PIN 19U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_ACCL_INTR_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitACCELPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/lpc55/boards/double_m33_express/double_m33_express.mex b/hw/bsp/lpc55/boards/double_m33_express/double_m33_express.mex new file mode 100644 index 000000000..47d0909d6 --- /dev/null +++ b/hw/bsp/lpc55/boards/double_m33_express/double_m33_express.mex @@ -0,0 +1,1283 @@ +<?xml version="1.0" encoding= "UTF-8" ?> +<configuration name="LPCXpresso55S69" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_19 http://mcuxpresso.nxp.com/XSD/mex_configuration_19.xsd" uuid="acf73d26-2bf9-4855-b3be-26068672d98a" version="19" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_19" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> + <common> + <processor>LPC55S69</processor> + <package>LPC55S69JBD100</package> + <board>LPCXpresso55S69</board> + <board_revision>A2</board_revision> + <mcu_data>ksdk2_0</mcu_data> + <cores selected="cm33_core0"> + <core name="Cortex-M33 (Core #0)" id="cm33_core0" description=""/> + <core name="Cortex-M33 (Core #1)" id="cm33_core1" description=""/> + </cores> + <description></description> + </common> + <preferences> + <validate_boot_init_only>true</validate_boot_init_only> + <generate_code_modified_registers_only>false</generate_code_modified_registers_only> + <custom_copyright> + <text>/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +</text> + <enabled>true</enabled> + </custom_copyright> + <update_include_paths>true</update_include_paths> + <enable_parallel_routing>true</enable_parallel_routing> + <generate_registers_defines>false</generate_registers_defines> + </preferences> + <tools> + <pins name="Pins" version="17.0" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/pin_mux.c" update_enabled="true"/> + <file path="board/pin_mux.h" update_enabled="true"/> + </generated_project_files> + <pins_profile> + <processor_version>25.09.10</processor_version> + <pin_labels> + <pin_label pin_num="7" pin_signal="PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1" label="P18[2]/SD1_CLK" identifier="LED"/> + </pin_labels> + </pins_profile> + <functions_list> + <function name="BOARD_InitDEBUG_UARTPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM0" description="Peripheral FLEXCOMM0 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM0" signal="RXD_SDA_MOSI_DATA" pin_num="92" pin_signal="PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM0" signal="TXD_SCL_MISO_WS" pin_num="94" pin_signal="PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitSWD_DEBUGPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="SWD" description="Peripheral SWD signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="SWD" signal="SWCLK" pin_num="13" pin_signal="PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9"> + <pin_features> + <pin_feature name="mode" value="pullDown"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SWD" signal="SWDIO" pin_num="12" pin_signal="PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SWD" signal="SWO" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1"> + <pin_features> + <pin_feature name="identifier" value="DEBUG_SWD_SWO"/> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitUSBPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="USBFSH" description="Peripheral USBFSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="USBHSH" description="Peripheral USBHSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="USBFSH" signal="USB_DP" pin_num="97" pin_signal="USB0_DP"/> + <pin peripheral="USBFSH" signal="USB_DM" pin_num="98" pin_signal="USB0_DM"/> + <pin peripheral="USBFSH" signal="USB_VBUS" pin_num="78" pin_signal="PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="USBHSH" signal="USB_DM" pin_num="35" pin_signal="USB1_DM"/> + <pin peripheral="USBHSH" signal="USB_DP" pin_num="34" pin_signal="USB1_DP"/> + <pin peripheral="USBHSH" signal="USB_VBUS" pin_num="36" pin_signal="USB1_VBUS"/> + <pin peripheral="USBHSH" signal="USB_OVERCURRENTN" pin_num="65" pin_signal="PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBFSH" signal="USB_OVERCURRENTN" pin_num="66" pin_signal="PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBFSH" signal="USB_PORTPWRN" pin_num="67" pin_signal="PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBHSH" signal="USB_PORTPWRN" pin_num="80" pin_signal="PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitLEDsPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="GPIO" signal="PIO0, 1" pin_num="7" pin_signal="PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1"> + <pin_features> + <pin_feature name="direction" value="OUTPUT"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitBUTTONsPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="GPIO" signal="PIO0, 5" pin_num="88" pin_signal="PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="SYSCON" signal="RESET" pin_num="32" pin_signal="RESETN"/> + </pins> + </function> + <function name="BOARD_InitPins_Core0"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins_Core0"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins/> + </function> + <function name="BOARD_InitPins_Core1"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core1</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins_Core1"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins/> + </function> + <function name="BOARD_InitI2SPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM7" description="Peripheral FLEXCOMM7 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM6" description="Peripheral FLEXCOMM6 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="SYSCON" signal="MCLK" pin_num="91" pin_signal="PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="SCK" pin_num="76" pin_signal="PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="RXD_SDA_MOSI_DATA" pin_num="74" pin_signal="PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="TXD_SCL_MISO_WS" pin_num="90" pin_signal="PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="SCK" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1"> + <pin_features> + <pin_feature name="identifier" value="FC6_I2S_CLK"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="RXD_SDA_MOSI_DATA" pin_num="2" pin_signal="PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="TXD_SCL_MISO_WS" pin_num="87" pin_signal="PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitACCELPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitACCELPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 19" pin_num="58" pin_signal="PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + </functions_list> + </pins> + <clocks name="Clocks" version="18.0" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/clock_config.c" update_enabled="true"/> + <file path="board/clock_config.h" update_enabled="true"/> + </generated_project_files> + <clocks_profile> + <processor_version>25.09.10</processor_version> + </clocks_profile> + <clock_configurations> + <clock_configuration name="BOARD_BootClockFRO12M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources/> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="12 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings/> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockFROHF96M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="ANACTRL.fro_hf.outFreq" value="96 MHz" locked="false" enabled="false"/> + </clock_sources> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="96 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG" value="Enable" locked="false"/> + <setting id="SYSCON.MAINCLKSELA.sel" value="ANACTRL.fro_hf_clk" locked="false"/> + </clock_settings> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockPLL100M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="direction" evaluation=""> + <data>INPUT</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="direction" evaluation=""> + <data>OUTPUT</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/> + </clock_sources> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="100 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="PLL0_Mode" value="Normal" locked="false"/> + <setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/> + <setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/> + <setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL0_BYPASS" locked="false"/> + <setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL0M_MULT.scale" value="100" locked="true"/> + <setting id="SYSCON.PLL0N_DIV.scale" value="4" locked="true"/> + <setting id="SYSCON.PLL0_PDEC.scale" value="4" locked="true"/> + </clock_settings> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockPLL150M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="direction" evaluation=""> + <data>INPUT</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="direction" evaluation=""> + <data>OUTPUT</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/> + </clock_sources> + <clock_outputs> + <clock_output id="FXCOM0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/> + <clock_output id="System_clock.outFreq" value="144 MHz" locked="false" accuracy=""/> + <clock_output id="USB0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/> + <clock_output id="USB1_PHY_clock.outFreq" value="16 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="PLL0_Mode" value="Normal" locked="false"/> + <setting id="PLL1_Mode" value="Normal" locked="false"/> + <setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/> + <setting id="ENABLE_PLL_USB_OUT" value="Enabled" locked="false"/> + <setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/> + <setting id="SYSCON.FCCLKSEL0.sel" value="SYSCON.PLL0DIV" locked="false"/> + <setting id="SYSCON.FRGCTRL0_DIV.scale" value="400" locked="false"/> + <setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL1_BYPASS" locked="false"/> + <setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL0DIV.scale" value="2" locked="false"/> + <setting id="SYSCON.PLL0M_MULT.scale" value="150" locked="true"/> + <setting id="SYSCON.PLL0N_DIV.scale" value="8" locked="true"/> + <setting id="SYSCON.PLL0_PDEC.scale" value="2" locked="true"/> + <setting id="SYSCON.PLL1CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL1M_MULT.scale" value="18" locked="false"/> + <setting id="SYSCON.PLL1_PDEC.scale" value="2" locked="false"/> + <setting id="SYSCON.USB0CLKDIV.scale" value="3" locked="false"/> + <setting id="SYSCON.USB0CLKSEL.sel" value="SYSCON.MAINCLKSELB" locked="false"/> + </clock_settings> + <called_from_default_init>true</called_from_default_init> + </clock_configuration> + </clock_configurations> + </clocks> + <dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <dcdx_profile> + <processor_version>0.0.0</processor_version> + </dcdx_profile> + <dcdx_configurations/> + </dcdx> + <periphs name="Peripherals" version="15.0" enabled="true" update_project_code="true"> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="FLEXCOMM USART Driver is not found in the toolchain/IDE project. The project will not compile!" problem_level="2" source="Peripherals"> + <feature name="enabled" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="An unsupported version of the FLEXCOMM USART Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. The project might not compile correctly." problem_level="1" source="Peripherals"> + <feature name="version" evaluation="equivalent"> + <data type="Version">2.2.0</data> + </feature> + </dependency> + <dependency resourceType="Tool" resourceId="Clocks" description="The Clocks tool is required by the Peripherals tool, but it is disabled." problem_level="2" source="Peripherals"> + <feature name="enabled" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <generated_project_files> + <file path="board/peripherals.c" update_enabled="true"/> + <file path="board/peripherals.h" update_enabled="true"/> + </generated_project_files> + <peripherals_profile> + <processor_version>25.09.10</processor_version> + </peripherals_profile> + <functional_groups> + <functional_group name="BOARD_InitPeripherals_cm33_core0" uuid="61d0725d-b300-49cb-9c66-b5edfbf8ffc1" called_from_default_init="true" id_prefix="" core="cm33_core0"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="ClockOutput" resourceId="FXCOM0_clock" description="FXCOM0 clock is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals_cm33_core0"> + <feature name="frequency" evaluation="greaterThan"> + <data type="Frequency" unit="Hz">0</data> + </feature> + </dependency> + <dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_rxd" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals_cm33_core0"> + <feature name="routed" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + <dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_txd" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals_cm33_core0"> + <feature name="routed" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + </dependencies> + <instances> + <instance name="ACCEL" uuid="b999c56a-0d01-4089-9311-9224db5272f4" type="flexcomm_i2c" type_id="flexcomm_i2c_2.3.0" mode="I2C_Polling" peripheral="FLEXCOMM4" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="fsl_i2c" quick_selection="QS_I2C_Master"> + <setting name="i2c_mode" value="kI2C_Master"/> + <setting name="clockSource" value="FXCOMFunctionClock"/> + <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/> + <struct name="i2c_master_config"> + <setting name="enableMaster" value="true"/> + <setting name="baudRate_Bps" value="100000"/> + <setting name="enableTimeout" value="false"/> + <setting name="timeout_Ms" value="35"/> + </struct> + </config_set> + </instance> + <instance name="DEBUG_UART" uuid="9fb0504c-6159-43e2-98bb-51d75f06133a" type="flexcomm_usart" type_id="flexcomm_usart_2.2.0" mode="polling" peripheral="FLEXCOMM0" enabled="true" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="usartConfig_t"> + <struct name="usartConfig"> + <setting name="clockSource" value="FXCOMFunctionClock"/> + <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/> + <setting name="baudRate_Bps" value="115200"/> + <setting name="syncMode" value="kUSART_SyncModeDisabled"/> + <setting name="parityMode" value="kUSART_ParityDisabled"/> + <setting name="stopBitCount" value="kUSART_OneStopBit"/> + <setting name="bitCountPerChar" value="kUSART_8BitsPerChar"/> + <setting name="loopback" value="false"/> + <setting name="txWatermark" value="kUSART_TxFifo0"/> + <setting name="rxWatermark" value="kUSART_RxFifo1"/> + <setting name="enableRx" value="true"/> + <setting name="enableTx" value="true"/> + <setting name="clockPolarity" value="kUSART_RxSampleOnFallingEdge"/> + <setting name="enableContinuousSCLK" value="false"/> + </struct> + </config_set> + </instance> + <instance name="LEDS" uuid="f5ad3a56-404b-44cb-8abc-7b25b5551d33" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="lpc_gpio"/> + </instance> + <instance name="SW" uuid="d57ddfca-dc72-486c-a145-c7a2ab1e1a66" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="lpc_gpio"/> + </instance> + <instance name="NVIC" uuid="56761ad9-9b77-4074-917d-de0fde10cd48" type="nvic" type_id="nvic" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false"> + <config_set name="nvic"> + <array name="interrupt_table"/> + <array name="interrupts"/> + </config_set> + </instance> + </instances> + </functional_group> + <functional_group name="BOARD_InitPeripherals_cm33_core1" uuid="e2041cd4-ebb6-45a5-807f-e0c2dc047d48" called_from_default_init="false" id_prefix="" core="cm33_core1"> + <description></description> + <options/> + <dependencies/> + <instances> + <instance name="NVIC_2" uuid="db546092-4c45-40af-938a-8cc58edd1c4f" type="nvic" type_id="nvic" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false"> + <config_set name="nvic"> + <array name="interrupt_table"/> + <array name="interrupts"/> + </config_set> + </instance> + </instances> + </functional_group> + </functional_groups> + <components> + <component name="system" uuid="905d2747-654a-47d9-91f9-81a5c6f9c407" type_id="system"> + <config_set_global name="global_system_definitions"> + <setting name="user_definitions" value=""/> + <setting name="user_includes" value=""/> + <setting name="global_init" value=""/> + </config_set_global> + </component> + <component name="msg" uuid="64cbcd7c-424d-4baf-9681-a60878969fb6" type_id="msg"> + <config_set_global name="global_messages"/> + </component> + <component name="generic_can" uuid="b9b018dd-ef4e-41f6-b456-f91b855cb391" type_id="generic_can"> + <config_set_global name="global_can"/> + </component> + <component name="uart_cmsis_common" uuid="bafa6375-9184-4272-8102-06ea086041d7" type_id="uart_cmsis_common"> + <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/> + </component> + <component name="generic_uart" uuid="1710dc7f-381f-4b37-8f78-0fd2f923b3ac" type_id="generic_uart"> + <config_set_global name="global_uart"/> + </component> + <component name="generic_enet" uuid="c7fc4395-b141-4b13-a326-4145e765b2b7" type_id="generic_enet"> + <config_set_global name="global_enet"/> + </component> + <component name="gpio_adapter_common" uuid="b6ee89c2-4c58-4181-94dc-af13d8ae8ea5" type_id="gpio_adapter_common"> + <config_set_global name="global_gpio_adapter_common" quick_selection="default"/> + </component> + </components> + </periphs> + <tee name="TEE" version="10.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <tee_profile> + <processor_version>0.0.0</processor_version> + <tool_options> + <option id="_output_type_" value="c_code"/> + <option id="_legacy_source_names_" value="yes"/> + </tool_options> + </tee_profile> + <functional_group name="BOARD_InitTrustZone" called_from_default_init="true" id_prefix="" prefix_user_defined="true"> + <description></description> + <options/> + <ahb> + <relative_region start="0" size="655360" security="s_priv" memory="PROGRAM_FLASH"/> + <relative_region start="0" size="131072" security="s_priv" memory="BootROM"/> + <relative_region start="0" size="32768" security="s_priv" memory="SRAMX"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM0"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM1"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM2"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM3"/> + <relative_region start="0" size="16384" security="s_priv" memory="SRAM4"/> + <relative_region start="0" size="16384" security="s_priv" memory="AHBperipherals_port10_ahb_secure_ctrl_area"/> + <relative_region start="0" size="16384" security="s_priv" memory="USB_RAM"/> + <masters> + <master id="HASH" security="ns_user"/> + <master id="MCM33C" security="ns_user"/> + <master id="MCM33S" security="ns_user"/> + <master id="PQ" security="ns_user"/> + <master id="SDIO" security="ns_user"/> + <master id="SDMA0" security="ns_user"/> + <master id="SDMA1" security="ns_user"/> + <master id="USBFSD" security="ns_user"/> + <master id="USBFSH" security="ns_user"/> + </masters> + <peripherals> + <peripheral id="ADC0" security="s_priv"/> + <peripheral id="AHB_SECURE_CTRL" security="s_priv"/> + <peripheral id="ANACTRL" security="s_priv"/> + <peripheral id="CASPER" security="s_priv"/> + <peripheral id="CRC_ENGINE" security="s_priv"/> + <peripheral id="CTIMER0" security="s_priv"/> + <peripheral id="CTIMER1" security="s_priv"/> + <peripheral id="CTIMER2" security="s_priv"/> + <peripheral id="CTIMER3" security="s_priv"/> + <peripheral id="CTIMER4" security="s_priv"/> + <peripheral id="DBGMAILBOX" security="s_priv"/> + <peripheral id="DMA0" security="s_priv"/> + <peripheral id="DMA1" security="s_priv"/> + <peripheral id="FLASH" security="s_priv"/> + <peripheral id="FLEXCOMM0" security="s_priv"/> + <peripheral id="FLEXCOMM1" security="s_priv"/> + <peripheral id="FLEXCOMM2" security="s_priv"/> + <peripheral id="FLEXCOMM3" security="s_priv"/> + <peripheral id="FLEXCOMM4" security="s_priv"/> + <peripheral id="FLEXCOMM5" security="s_priv"/> + <peripheral id="FLEXCOMM6" security="s_priv"/> + <peripheral id="FLEXCOMM7" security="s_priv"/> + <peripheral id="GINT0" security="s_priv"/> + <peripheral id="GINT1" security="s_priv"/> + <peripheral id="GPIO" security="s_priv"/> + <peripheral id="HASHCRYPT" security="s_priv"/> + <peripheral id="INPUTMUX" security="s_priv"/> + <peripheral id="IOCON" security="s_priv"/> + <peripheral id="MAILBOX" security="s_priv"/> + <peripheral id="MRT0" security="s_priv"/> + <peripheral id="OSTIMER" security="s_priv"/> + <peripheral id="PINT" security="s_priv"/> + <peripheral id="PLU" security="s_priv"/> + <peripheral id="PMC" security="s_priv"/> + <peripheral id="POWERQUAD" security="s_priv"/> + <peripheral id="PRINCE" security="s_priv"/> + <peripheral id="PUF" security="s_priv"/> + <peripheral id="RNG" security="s_priv"/> + <peripheral id="RTC" security="s_priv"/> + <peripheral id="SCT0" security="s_priv"/> + <peripheral id="SDIF" security="s_priv"/> + <peripheral id="SECGPIO" security="s_priv"/> + <peripheral id="SECPINT" security="s_priv"/> + <peripheral id="SPI8" security="s_priv"/> + <peripheral id="SYSCON" security="s_priv"/> + <peripheral id="SYSCTL" security="s_priv"/> + <peripheral id="USB0" security="s_priv"/> + <peripheral id="USBFSH" security="s_priv"/> + <peripheral id="USBHSD" security="s_priv"/> + <peripheral id="USBHSH" security="s_priv"/> + <peripheral id="USBPHY" security="s_priv"/> + <peripheral id="UTICK0" security="s_priv"/> + <peripheral id="WWDT" security="s_priv"/> + </peripherals> + <interrupts> + <masking> + <interrupt id="acmp_capt_irq" masked="Masked"/> + <interrupt id="adc_irq" masked="Masked"/> + <interrupt id="casper_irq" masked="Masked"/> + <interrupt id="ctimer0_irq" masked="Masked"/> + <interrupt id="ctimer1_irq" masked="Masked"/> + <interrupt id="ctimer2_irq" masked="Masked"/> + <interrupt id="ctimer3_irq" masked="Masked"/> + <interrupt id="ctimer4_irq" masked="Masked"/> + <interrupt id="flexcomm0_irq" masked="Masked"/> + <interrupt id="flexcomm1_irq" masked="Masked"/> + <interrupt id="flexcomm2_irq" masked="Masked"/> + <interrupt id="flexcomm3_irq" masked="Masked"/> + <interrupt id="flexcomm4_irq" masked="Masked"/> + <interrupt id="flexcomm5_irq" masked="Masked"/> + <interrupt id="flexcomm6_irq" masked="Masked"/> + <interrupt id="flexcomm7_irq" masked="Masked"/> + <interrupt id="global_irq0" masked="Masked"/> + <interrupt id="global_irq1" masked="Masked"/> + <interrupt id="lspi_hs_irq" masked="Masked"/> + <interrupt id="mailbox_irq" masked="Masked"/> + <interrupt id="mrt_irq" masked="Masked"/> + <interrupt id="os_event_irq" masked="Masked"/> + <interrupt id="pin_int4" masked="Masked"/> + <interrupt id="pin_int5" masked="Masked"/> + <interrupt id="pin_int6" masked="Masked"/> + <interrupt id="pin_int7" masked="Masked"/> + <interrupt id="pin_irq0" masked="Masked"/> + <interrupt id="pin_irq1" masked="Masked"/> + <interrupt id="pin_irq2" masked="Masked"/> + <interrupt id="pin_irq3" masked="Masked"/> + <interrupt id="plu_irq" masked="Masked"/> + <interrupt id="pq_irq" masked="Masked"/> + <interrupt id="qddkey_irq" masked="Masked"/> + <interrupt id="rtc_irq" masked="Masked"/> + <interrupt id="sct_irq" masked="Masked"/> + <interrupt id="sdio_irq" masked="Masked"/> + <interrupt id="sdma0_irq" masked="Masked"/> + <interrupt id="sdma1_irq" masked="Masked"/> + <interrupt id="sec_hypervisor_call_irq" masked="Masked"/> + <interrupt id="sec_int0" masked="Masked"/> + <interrupt id="sec_int1" masked="Masked"/> + <interrupt id="sec_vio_irq" masked="Masked"/> + <interrupt id="sha_irq" masked="Masked"/> + <interrupt id="sys_irq" masked="Masked"/> + <interrupt id="usb0_irq" masked="Masked"/> + <interrupt id="usb0_needclk_irq" masked="Masked"/> + <interrupt id="usb1_irq" masked="Masked"/> + <interrupt id="usb1_needclk_irq" masked="Masked"/> + <interrupt id="usb1_utmi_irq" masked="Masked"/> + <interrupt id="utick_irq" masked="Masked"/> + </masking> + <security> + <interrupt id="acmp_capt_irq" secure="Secure"/> + <interrupt id="adc_irq" secure="Secure"/> + <interrupt id="casper_irq" secure="Secure"/> + <interrupt id="ctimer0_irq" secure="Secure"/> + <interrupt id="ctimer1_irq" secure="Secure"/> + <interrupt id="ctimer2_irq" secure="Secure"/> + <interrupt id="ctimer3_irq" secure="Secure"/> + <interrupt id="ctimer4_irq" secure="Secure"/> + <interrupt id="flexcomm0_irq" secure="Secure"/> + <interrupt id="flexcomm1_irq" secure="Secure"/> + <interrupt id="flexcomm2_irq" secure="Secure"/> + <interrupt id="flexcomm3_irq" secure="Secure"/> + <interrupt id="flexcomm4_irq" secure="Secure"/> + <interrupt id="flexcomm5_irq" secure="Secure"/> + <interrupt id="flexcomm6_irq" secure="Secure"/> + <interrupt id="flexcomm7_irq" secure="Secure"/> + <interrupt id="global_irq0" secure="Secure"/> + <interrupt id="global_irq1" secure="Secure"/> + <interrupt id="lspi_hs_irq" secure="Secure"/> + <interrupt id="mailbox_irq" secure="Secure"/> + <interrupt id="mrt_irq" secure="Secure"/> + <interrupt id="os_event_irq" secure="Secure"/> + <interrupt id="pin_int4" secure="Secure"/> + <interrupt id="pin_int5" secure="Secure"/> + <interrupt id="pin_int6" secure="Secure"/> + <interrupt id="pin_int7" secure="Secure"/> + <interrupt id="pin_irq0" secure="Secure"/> + <interrupt id="pin_irq1" secure="Secure"/> + <interrupt id="pin_irq2" secure="Secure"/> + <interrupt id="pin_irq3" secure="Secure"/> + <interrupt id="plu_irq" secure="Secure"/> + <interrupt id="pq_irq" secure="Secure"/> + <interrupt id="qddkey_irq" secure="Secure"/> + <interrupt id="rtc_irq" secure="Secure"/> + <interrupt id="sct_irq" secure="Secure"/> + <interrupt id="sdio_irq" secure="Secure"/> + <interrupt id="sdma0_irq" secure="Secure"/> + <interrupt id="sdma1_irq" secure="Secure"/> + <interrupt id="sec_hypervisor_call_irq" secure="Secure"/> + <interrupt id="sec_int0" secure="Secure"/> + <interrupt id="sec_int1" secure="Secure"/> + <interrupt id="sec_vio_irq" secure="Secure"/> + <interrupt id="sha_irq" secure="Secure"/> + <interrupt id="sys_irq" secure="Secure"/> + <interrupt id="usb0_irq" secure="Secure"/> + <interrupt id="usb0_needclk_irq" secure="Secure"/> + <interrupt id="usb1_irq" secure="Secure"/> + <interrupt id="usb1_needclk_irq" secure="Secure"/> + <interrupt id="usb1_utmi_irq" secure="Secure"/> + <interrupt id="utick_irq" secure="Secure"/> + </security> + </interrupts> + <ports> + <port id="pio0"> + <pin_mask id="0" masked="Masked"/> + <pin_mask id="1" masked="Masked"/> + <pin_mask id="10" masked="Masked"/> + <pin_mask id="11" masked="Masked"/> + <pin_mask id="12" masked="Masked"/> + <pin_mask id="13" masked="Masked"/> + <pin_mask id="14" masked="Masked"/> + <pin_mask id="15" masked="Masked"/> + <pin_mask id="16" masked="Masked"/> + <pin_mask id="17" masked="Masked"/> + <pin_mask id="18" masked="Masked"/> + <pin_mask id="19" masked="Masked"/> + <pin_mask id="2" masked="Masked"/> + <pin_mask id="20" masked="Masked"/> + <pin_mask id="21" masked="Masked"/> + <pin_mask id="22" masked="Masked"/> + <pin_mask id="23" masked="Masked"/> + <pin_mask id="24" masked="Masked"/> + <pin_mask id="25" masked="Masked"/> + <pin_mask id="26" masked="Masked"/> + <pin_mask id="27" masked="Masked"/> + <pin_mask id="28" masked="Masked"/> + <pin_mask id="29" masked="Masked"/> + <pin_mask id="3" masked="Masked"/> + <pin_mask id="30" masked="Masked"/> + <pin_mask id="31" masked="Masked"/> + <pin_mask id="4" masked="Masked"/> + <pin_mask id="5" masked="Masked"/> + <pin_mask id="6" masked="Masked"/> + <pin_mask id="7" masked="Masked"/> + <pin_mask id="8" masked="Masked"/> + <pin_mask id="9" masked="Masked"/> + </port> + <port id="pio1"> + <pin_mask id="0" masked="Masked"/> + <pin_mask id="1" masked="Masked"/> + <pin_mask id="10" masked="Masked"/> + <pin_mask id="11" masked="Masked"/> + <pin_mask id="12" masked="Masked"/> + <pin_mask id="13" masked="Masked"/> + <pin_mask id="14" masked="Masked"/> + <pin_mask id="15" masked="Masked"/> + <pin_mask id="16" masked="Masked"/> + <pin_mask id="17" masked="Masked"/> + <pin_mask id="18" masked="Masked"/> + <pin_mask id="19" masked="Masked"/> + <pin_mask id="2" masked="Masked"/> + <pin_mask id="20" masked="Masked"/> + <pin_mask id="21" masked="Masked"/> + <pin_mask id="22" masked="Masked"/> + <pin_mask id="23" masked="Masked"/> + <pin_mask id="24" masked="Masked"/> + <pin_mask id="25" masked="Masked"/> + <pin_mask id="26" masked="Masked"/> + <pin_mask id="27" masked="Masked"/> + <pin_mask id="28" masked="Masked"/> + <pin_mask id="29" masked="Masked"/> + <pin_mask id="3" masked="Masked"/> + <pin_mask id="30" masked="Masked"/> + <pin_mask id="31" masked="Masked"/> + <pin_mask id="4" masked="Masked"/> + <pin_mask id="5" masked="Masked"/> + <pin_mask id="6" masked="Masked"/> + <pin_mask id="7" masked="Masked"/> + <pin_mask id="8" masked="Masked"/> + <pin_mask id="9" masked="Masked"/> + </port> + </ports> + </ahb> + <saus> + <sau enabled="true" all_non_secure="false" generate_code_for_disabled_regions="false"> + <region start="0" size="268435456" security="ns" enabled="true" index="0"/> + <region start="536870912" size="3221225472" security="ns" enabled="true" index="1"/> + <region start="0" size="32" security="ns" enabled="false" index="2"/> + <region start="0" size="32" security="ns" enabled="false" index="3"/> + <region start="0" size="32" security="ns" enabled="false" index="4"/> + <region start="0" size="32" security="ns" enabled="false" index="5"/> + <region start="0" size="32" security="ns" enabled="false" index="6"/> + <region start="0" size="32" security="ns" enabled="false" index="7"/> + </sau> + </saus> + <global_options> + <option id="AIRCR_PRIS" value="no"/> + <option id="AIRCR_BFHFNMINS" value="no"/> + <option id="AIRCR_SYSRESETREQS" value="no"/> + <option id="SCR_SLEEPDEEPS" value="no"/> + <option id="SHCSR_SECUREFAULTENA" value="no"/> + <option id="CPACR_CP0" value="3"/> + <option id="CPACR_CP1" value="3"/> + <option id="CPACR_CP2" value="0"/> + <option id="CPACR_CP3" value="0"/> + <option id="CPACR_CP4" value="0"/> + <option id="CPACR_CP5" value="0"/> + <option id="CPACR_CP6" value="0"/> + <option id="CPACR_CP7" value="0"/> + <option id="CPACR_CP10" value="3"/> + <option id="CPACR_CP11" value="3"/> + <option id="NSACR_CP0" value="yes"/> + <option id="NSACR_CP1" value="yes"/> + <option id="NSACR_CP2" value="no"/> + <option id="NSACR_CP3" value="no"/> + <option id="NSACR_CP4" value="no"/> + <option id="NSACR_CP5" value="no"/> + <option id="NSACR_CP6" value="no"/> + <option id="NSACR_CP7" value="no"/> + <option id="NSACR_CP10" value="yes"/> + <option id="NSACR_CP11" value="yes"/> + <option id="CPPWR_SU0" value="no"/> + <option id="CPPWR_SUS0" value="no"/> + <option id="CPPWR_SU1" value="no"/> + <option id="CPPWR_SUS1" value="no"/> + <option id="CPPWR_SU2" value="no"/> + <option id="CPPWR_SUS2" value="no"/> + <option id="CPPWR_SU3" value="no"/> + <option id="CPPWR_SUS3" value="no"/> + <option id="CPPWR_SU4" value="no"/> + <option id="CPPWR_SUS4" value="no"/> + <option id="CPPWR_SU5" value="no"/> + <option id="CPPWR_SUS5" value="no"/> + <option id="CPPWR_SU6" value="no"/> + <option id="CPPWR_SUS6" value="no"/> + <option id="CPPWR_SU7" value="no"/> + <option id="CPPWR_SUS7" value="no"/> + <option id="CPPWR_SU10" value="no"/> + <option id="CPPWR_SUS10" value="no"/> + <option id="CPPWR_SU11" value="no"/> + <option id="CPPWR_SUS11" value="no"/> + <option id="SEC_GPIO_MASK0_LOCK" value="no"/> + <option id="SEC_GPIO_MASK1_LOCK" value="no"/> + <option id="SEC_CPU1_INT_MASK0_LOCK" value="no"/> + <option id="SEC_CPU1_INT_MASK1_LOCK" value="no"/> + <option id="MASTER_SEC_LEVEL_LOCK" value="no"/> + <option id="CPU0_LOCK_NS_VTOR" value="no"/> + <option id="CPU0_LOCK_NS_MPU" value="no"/> + <option id="CPU0_LOCK_S_VTAIRCR" value="no"/> + <option id="CPU0_LOCK_S_MPU" value="no"/> + <option id="CPU0_LOCK_SAU" value="no"/> + <option id="CPU0_LOCK_REG_LOCK" value="no"/> + <option id="CPU1_LOCK_NS_VTOR" value="no"/> + <option id="CPU1_LOCK_NS_MPU" value="no"/> + <option id="CPU1_LOCK_REG_LOCK" value="no"/> + <option id="AHB_MISC_CTRL_REG_ENABLE_SECURE_CHECKING" value="yes"/> + <option id="AHB_MISC_CTRL_REG_ENABLE_S_PRIV_CHECK" value="yes"/> + <option id="AHB_MISC_CTRL_REG_ENABLE_NS_PRIV_CHECK" value="yes"/> + <option id="AHB_MISC_CTRL_REG_DISABLE_VIOLATION_ABORT" value="no"/> + <option id="AHB_MISC_CTRL_REG_DISABLE_SIMPLE_MASTER_STRICT_MODE" value="no"/> + <option id="AHB_MISC_CTRL_REG_DISABLE_SMART_MASTER_STRICT_MODE" value="no"/> + <option id="AHB_MISC_CTRL_REG_IDAU_ALL_NS" value="no"/> + <option id="AHB_MISC_CTRL_REG_WRITE_LOCK" value="yes"/> + </global_options> + <mpus> + <mpu enabled="false" priv_default_map="false" handler_enabled="false" id="s" generate_code_for_disabled_regions="false"> + <attributes> + <group index="0" id="Code" memory_type="normal" device="nGnRE"/> + <group index="1" id="RAM" memory_type="normal" device="nGnRE"/> + <group index="2" id="Peripheral" memory_type="device" device="nGnRE"/> + <group index="3" id="3" memory_type="device" device="nGnRE"/> + <group index="4" id="4" memory_type="device" device="nGnRE"/> + <group index="5" id="5" memory_type="device" device="nGnRE"/> + <group index="6" id="6" memory_type="device" device="nGnRE"/> + <group index="7" id="7" memory_type="device" device="nGnRE"/> + </attributes> + <regions> + <region start="0" size="32" security="priv" enabled="false" index="0" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="1" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="2" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="3" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="4" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="5" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="6" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="7" executable="false" read_only="false" attributes_index="0"/> + </regions> + </mpu> + <mpu enabled="false" priv_default_map="false" handler_enabled="false" id="ns" generate_code_for_disabled_regions="false"> + <attributes> + <group index="0" id="Code" memory_type="normal" device="nGnRE"/> + <group index="1" id="RAM" memory_type="normal" device="nGnRE"/> + <group index="2" id="Peripheral" memory_type="device" device="nGnRE"/> + <group index="3" id="3" memory_type="device" device="nGnRE"/> + <group index="4" id="4" memory_type="device" device="nGnRE"/> + <group index="5" id="5" memory_type="device" device="nGnRE"/> + <group index="6" id="6" memory_type="device" device="nGnRE"/> + <group index="7" id="7" memory_type="device" device="nGnRE"/> + </attributes> + <regions> + <region start="0" size="32" security="priv" enabled="false" index="0" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="1" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="2" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="3" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="4" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="5" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="6" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="7" executable="false" read_only="false" attributes_index="0"/> + </regions> + </mpu> + </mpus> + </functional_group> + </tee> + </tools> +</configuration> diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/LPCXpresso55S28.mex b/hw/bsp/lpc55/boards/lpcxpresso55s28/LPCXpresso55S28.mex new file mode 100644 index 000000000..cc59745f9 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/LPCXpresso55S28.mex @@ -0,0 +1,856 @@ +<?xml version="1.0" encoding= "UTF-8" ?> +<configuration name="LPCXpresso55S28" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_19 http://mcuxpresso.nxp.com/XSD/mex_configuration_19.xsd" uuid="485a5299-e2fe-41ab-bc43-80d8d2a4ae02" version="19" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_19" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> + <common> + <processor>LPC55S28</processor> + <package>LPC55S28JBD100</package> + <board>LPCXpresso55S28</board> + <board_revision>A2</board_revision> + <mcu_data>ksdk2_0</mcu_data> + <cores selected="cm33_core0"> + <core name="Cortex-M33 (Core #0)" id="cm33_core0" description=""/> + </cores> + <description></description> + </common> + <preferences> + <validate_boot_init_only>true</validate_boot_init_only> + <generate_code_modified_registers_only>false</generate_code_modified_registers_only> + <custom_copyright> + <text>/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +</text> + <enabled>true</enabled> + </custom_copyright> + <update_include_paths>true</update_include_paths> + <enable_parallel_routing>true</enable_parallel_routing> + <generate_registers_defines>false</generate_registers_defines> + </preferences> + <tools> + <pins name="Pins" version="17.0" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/pin_mux.c" update_enabled="true"/> + <file path="board/pin_mux.h" update_enabled="true"/> + </generated_project_files> + <pins_profile> + <processor_version>25.09.10</processor_version> + <external_user_signals> + <properties/> + </external_user_signals> + </pins_profile> + <functions_list> + <function name="BOARD_InitDEBUG_UARTPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM0" description="Peripheral FLEXCOMM0 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM0" signal="RXD_SDA_MOSI_DATA" pin_num="92" pin_signal="PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM0" signal="TXD_SCL_MISO_WS" pin_num="94" pin_signal="PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitSWD_DEBUGPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="SWD" description="Peripheral SWD signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="SWD" signal="SWCLK" pin_num="13" pin_signal="PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9"> + <pin_features> + <pin_feature name="mode" value="pullDown"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SWD" signal="SWDIO" pin_num="12" pin_signal="PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SWD" signal="SWO" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1"> + <pin_features> + <pin_feature name="identifier" value="DEBUG_SWD_SWO"/> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitUSBPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="USBFSH" description="Peripheral USBFSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="USBHSH" description="Peripheral USBHSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="USBFSH" signal="USB_DP" pin_num="97" pin_signal="USB0_DP"/> + <pin peripheral="USBFSH" signal="USB_DM" pin_num="98" pin_signal="USB0_DM"/> + <pin peripheral="USBFSH" signal="USB_VBUS" pin_num="78" pin_signal="PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="USBHSH" signal="USB_DM" pin_num="35" pin_signal="USB1_DM"/> + <pin peripheral="USBHSH" signal="USB_DP" pin_num="34" pin_signal="USB1_DP"/> + <pin peripheral="USBHSH" signal="USB_VBUS" pin_num="36" pin_signal="USB1_VBUS"/> + <pin peripheral="USBHSH" signal="USB_PORTPWRN" pin_num="80" pin_signal="PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBFSH" signal="USB_PORTPWRN" pin_num="67" pin_signal="PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBFSH" signal="USB_OVERCURRENTN" pin_num="66" pin_signal="PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBHSH" signal="USB_OVERCURRENTN" pin_num="65" pin_signal="PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitLEDsPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="GPIO" signal="PIO1, 4" pin_num="1" pin_signal="PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A"> + <pin_features> + <pin_feature name="direction" value="OUTPUT"/> + <pin_feature name="gpio_init_state" value="true"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 6" pin_num="5" pin_signal="PIO1_6/FC0_TXD_SCL_MISO_WS/SD0_D3/CTIMER2_MAT1/SCT_GPI3"> + <pin_features> + <pin_feature name="direction" value="OUTPUT"/> + <pin_feature name="gpio_init_state" value="true"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 7" pin_num="9" pin_signal="PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4"> + <pin_features> + <pin_feature name="direction" value="OUTPUT"/> + <pin_feature name="gpio_init_state" value="true"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitBUTTONsPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="GPIO" signal="PIO0, 5" pin_num="88" pin_signal="PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 18" pin_num="64" pin_signal="PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 9" pin_num="10" pin_signal="PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SYSCON" signal="RESET" pin_num="32" pin_signal="RESETN"/> + </pins> + </function> + <function name="BOARD_InitPins_Core0"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins_Core0"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins/> + </function> + <function name="BOARD_InitI2SPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM7" description="Peripheral FLEXCOMM7 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM6" description="Peripheral FLEXCOMM6 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="SYSCON" signal="MCLK" pin_num="91" pin_signal="PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="SCK" pin_num="76" pin_signal="PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="RXD_SDA_MOSI_DATA" pin_num="74" pin_signal="PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="TXD_SCL_MISO_WS" pin_num="90" pin_signal="PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="SCK" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1"> + <pin_features> + <pin_feature name="identifier" value="FC6_I2S_CLK"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="RXD_SDA_MOSI_DATA" pin_num="2" pin_signal="PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="TXD_SCL_MISO_WS" pin_num="87" pin_signal="PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitACCELPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitACCELPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 19" pin_num="58" pin_signal="PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + </functions_list> + </pins> + <clocks name="Clocks" version="18.0" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/clock_config.c" update_enabled="true"/> + <file path="board/clock_config.h" update_enabled="true"/> + </generated_project_files> + <clocks_profile> + <processor_version>25.09.10</processor_version> + </clocks_profile> + <clock_configurations> + <clock_configuration name="BOARD_BootClockFRO12M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources/> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="12 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="PLL1_Mode" value="Normal" locked="false"/> + </clock_settings> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockFROHF96M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="ANACTRL.fro_hf.outFreq" value="96 MHz" locked="false" enabled="false"/> + </clock_sources> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="96 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG" value="Enable" locked="false"/> + <setting id="SYSCON.MAINCLKSELA.sel" value="ANACTRL.fro_hf_clk" locked="false"/> + </clock_settings> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockPLL100M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="direction" evaluation=""> + <data>INPUT</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="direction" evaluation=""> + <data>OUTPUT</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/> + </clock_sources> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="100 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="PLL0_Mode" value="Normal" locked="false"/> + <setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/> + <setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/> + <setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL0_BYPASS" locked="false"/> + <setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL0M_MULT.scale" value="100" locked="true"/> + <setting id="SYSCON.PLL0N_DIV.scale" value="4" locked="true"/> + <setting id="SYSCON.PLL0_PDEC.scale" value="4" locked="true"/> + </clock_settings> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockPLL150M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="direction" evaluation=""> + <data>INPUT</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="direction" evaluation=""> + <data>OUTPUT</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/> + </clock_sources> + <clock_outputs> + <clock_output id="FXCOM0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/> + <clock_output id="SYSTICK0_clock.outFreq" value="144 MHz" locked="false" accuracy=""/> + <clock_output id="System_clock.outFreq" value="144 MHz" locked="false" accuracy=""/> + <clock_output id="USB0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/> + <clock_output id="USB1_PHY_clock.outFreq" value="16 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="PLL0_Mode" value="Normal" locked="false"/> + <setting id="PLL1_Mode" value="Normal" locked="false"/> + <setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/> + <setting id="ENABLE_PLL_USB_OUT" value="Enabled" locked="false"/> + <setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/> + <setting id="SYSCON.FCCLKSEL0.sel" value="SYSCON.PLL0DIV" locked="false"/> + <setting id="SYSCON.FRGCTRL0_DIV.scale" value="400" locked="false"/> + <setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL1_BYPASS" locked="false"/> + <setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL0DIV.scale" value="2" locked="false"/> + <setting id="SYSCON.PLL0M_MULT.scale" value="150" locked="true"/> + <setting id="SYSCON.PLL0N_DIV.scale" value="8" locked="true"/> + <setting id="SYSCON.PLL0_PDEC.scale" value="2" locked="true"/> + <setting id="SYSCON.PLL1CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL1M_MULT.scale" value="18" locked="false"/> + <setting id="SYSCON.PLL1_PDEC.scale" value="2" locked="false"/> + <setting id="SYSCON.SYSTICKCLKSEL0.sel" value="SYSCON.SYSTICKCLKDIV0" locked="false"/> + <setting id="SYSCON.USB0CLKDIV.scale" value="3" locked="false"/> + <setting id="SYSCON.USB0CLKSEL.sel" value="SYSCON.MAINCLKSELB" locked="false"/> + </clock_settings> + <called_from_default_init>true</called_from_default_init> + </clock_configuration> + </clock_configurations> + </clocks> + <dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <dcdx_profile> + <processor_version>N/A</processor_version> + </dcdx_profile> + <dcdx_configurations/> + </dcdx> + <periphs name="Peripherals" version="15.0" enabled="true" update_project_code="true"> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="FLEXCOMM USART Driver is not found in the toolchain/IDE project. The project will not compile!" problem_level="2" source="Peripherals"> + <feature name="enabled" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="An unsupported version of the FLEXCOMM USART Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. The project might not compile correctly." problem_level="1" source="Peripherals"> + <feature name="version" evaluation="equivalent"> + <data type="Version">2.2.0</data> + </feature> + </dependency> + <dependency resourceType="Tool" resourceId="Clocks" description="The Clocks tool is required by the Peripherals tool, but it is disabled." problem_level="2" source="Peripherals"> + <feature name="enabled" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <generated_project_files> + <file path="board/peripherals.c" update_enabled="true"/> + <file path="board/peripherals.h" update_enabled="true"/> + </generated_project_files> + <peripherals_profile> + <processor_version>25.09.10</processor_version> + </peripherals_profile> + <functional_groups> + <functional_group name="BOARD_InitPeripherals" uuid="61d0725d-b300-49cb-9c66-b5edfbf8ffc1" called_from_default_init="true" id_prefix="" core="cm33_core0"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="ClockOutput" resourceId="FXCOM0_clock" description="FXCOM0 clock is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals"> + <feature name="frequency" evaluation="greaterThan"> + <data type="Frequency" unit="Hz">0</data> + </feature> + </dependency> + <dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_rxd" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals"> + <feature name="routed" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + <dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_txd" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals"> + <feature name="routed" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + </dependencies> + <instances> + <instance name="DEBUG_UART" uuid="30367b6e-4b43-4345-bc10-e4052723fa66" type="flexcomm_usart" type_id="flexcomm_usart_2.2.0" mode="polling" peripheral="FLEXCOMM0" enabled="true" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="usartConfig_t"> + <struct name="usartConfig"> + <setting name="clockSource" value="FXCOMFunctionClock"/> + <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/> + <setting name="baudRate_Bps" value="115200"/> + <setting name="syncMode" value="kUSART_SyncModeDisabled"/> + <setting name="parityMode" value="kUSART_ParityDisabled"/> + <setting name="stopBitCount" value="kUSART_OneStopBit"/> + <setting name="bitCountPerChar" value="kUSART_8BitsPerChar"/> + <setting name="loopback" value="false"/> + <setting name="txWatermark" value="kUSART_TxFifo0"/> + <setting name="rxWatermark" value="kUSART_RxFifo1"/> + <setting name="enableRx" value="true"/> + <setting name="enableTx" value="true"/> + <setting name="clockPolarity" value="kUSART_RxSampleOnFallingEdge"/> + <setting name="enableContinuousSCLK" value="false"/> + </struct> + </config_set> + </instance> + <instance name="ACCEL" uuid="796441cb-6cbf-48af-8003-54caaeb9a132" type="flexcomm_i2c" type_id="flexcomm_i2c_2.0.1" mode="I2C_Polling" peripheral="FLEXCOMM4" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="fsl_i2c" quick_selection="QS_I2C_Master"> + <setting name="i2c_mode" value="kI2C_Master"/> + <setting name="clockSource" value="FXCOMFunctionClock"/> + <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/> + <struct name="i2c_master_config"> + <setting name="enableMaster" value="true"/> + <setting name="baudRate_Bps" value="100000"/> + <setting name="enableTimeout" value="false"/> + </struct> + </config_set> + </instance> + <instance name="SW" uuid="723cdb07-2d95-4daf-94b4-1dfaf0ce6c04" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="lpc_gpio"/> + </instance> + <instance name="LEDS" uuid="7ec70f15-5deb-44fa-b8cf-2d12230a37ac" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="lpc_gpio"/> + </instance> + <instance name="NVIC" uuid="d00e8bd3-19f3-445c-9444-103d6461e0d1" type="nvic" type_id="nvic" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false"> + <config_set name="nvic"> + <array name="interrupt_table"/> + <array name="interrupts"/> + </config_set> + </instance> + </instances> + </functional_group> + </functional_groups> + <components> + <component name="system" uuid="4e239a4c-f368-4554-b66e-d1af6e8b1f5d" type_id="system_54b53072540eeeb8f8e9343e71f28176"> + <config_set_global name="global_system_definitions"> + <setting name="user_definitions" value=""/> + <setting name="user_includes" value=""/> + <setting name="global_init" value=""/> + </config_set_global> + </component> + <component name="msg" uuid="7bbbd3b5-f7c2-4cb2-8b95-c037fdaf8e02" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7"> + <config_set_global name="global_messages"/> + </component> + <component name="generic_can" uuid="1560ea56-1bfb-4123-a192-daeeed8f2a1d" type_id="generic_can"> + <config_set_global name="global_can"/> + </component> + <component name="uart_cmsis_common" uuid="4305ffdd-d7f2-418a-b81b-8a042e7e4c75" type_id="uart_cmsis_common"> + <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/> + </component> + <component name="generic_uart" uuid="fe22d2c9-7984-4e79-a7b1-8d26fad750be" type_id="generic_uart"> + <config_set_global name="global_uart"/> + </component> + <component name="generic_enet" uuid="f5a27f2d-a41b-4143-ad53-b9ee09903619" type_id="generic_enet"> + <config_set_global name="global_enet"/> + </component> + <component name="gpio_adapter_common" uuid="03fd1bc8-0fd6-4b47-a53c-1c40e2aa781e" type_id="gpio_adapter_common"> + <config_set_global name="global_gpio_adapter_common" quick_selection="default"/> + </component> + </components> + </periphs> + <tee name="TEE" version="10.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <tee_profile> + <processor_version>N/A</processor_version> + </tee_profile> + </tee> + </tools> +</configuration> diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake index d935b70e6..b3d6ec722 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake @@ -1,10 +1,17 @@ set(MCU_VARIANT LPC55S28) set(MCU_CORE LPC55S28) +set(MCU_DRIVER_VARIANT LPC55S69) set(JLINK_DEVICE LPC55S28) +set(JLINK_OPTION "-USB 000727031389") + set(PYOCD_TARGET LPC55S28) set(NXPLINK_DEVICE LPC55S28:LPCXpresso55S28) +# device fullspeed, host highspeed +set(RHPORT_DEVICE 0) +set(RHPORT_HOST 1) + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S28JBD100 diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h index 025172d0f..c8d3a2b8f 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h @@ -36,33 +36,22 @@ extern "C" { #endif -// LED -#define LED_PORT 1 -#define LED_PIN 6 +// LED: use red LED from generated pin_mux +#define LED_PORT BOARD_INITLEDSPINS_LED_RED_PORT +#define LED_PIN BOARD_INITLEDSPINS_LED_RED_PIN #define LED_STATE_ON 0 -// WAKE button -#define BUTTON_PORT 1 -#define BUTTON_PIN 18 +// WAKE button: use S2 from generated pin_mux +#define BUTTON_PORT BOARD_INITBUTTONSPINS_S2_PORT +#define BUTTON_PIN BOARD_INITBUTTONSPINS_S2_PIN #define BUTTON_STATE_ACTIVE 0 // UART #define UART_DEV USART0 -#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN // XTAL #define XTAL0_CLK_HZ (16 * 1000 * 1000U) -// Power switch -#define USBFS_POWER_PORT 1 -#define USBFS_POWER_PIN 12 -#define USBFS_POWER_STATE_ON 0 - -#define USBHS_POWER_PORT 1 -#define USBHS_POWER_PIN 29 -#define USBHS_POWER_STATE_ON 0 - #ifdef __cplusplus } #endif diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk index ec0828e41..db2e11fd7 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk @@ -1,9 +1,20 @@ MCU_VARIANT = LPC55S28 MCU_CORE = LPC55S28 -PORT ?= 1 +MCU_DRIVER_VARIANT = LPC55S69 + +# device fullspeed, host highspeed +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 1 CFLAGS += -DCPU_LPC55S28JBD100 +SRC_C += \ + $(TOP)/$(BOARD_PATH)/board/clock_config.c \ + $(TOP)/$(BOARD_PATH)/board/pin_mux.c \ + $(TOP)/$(BOARD_PATH)/board/peripherals.c + +INC += $(TOP)/$(BOARD_PATH)/board + JLINK_DEVICE = LPC55S28 PYOCD_TARGET = LPC55S28 diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board/clock_config.c b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/clock_config.c new file mode 100644 index 000000000..c1e8e0575 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/clock_config.c @@ -0,0 +1,335 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to set up clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v18.0 +processor: LPC55S28 +package_id: LPC55S28JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S28 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_power.h" +#include "fsl_clock.h" +#include "clock_config.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockPLL150M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: System_clock.outFreq, value: 12 MHz} +settings: +- {id: PLL1_Mode, value: Normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF96M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFROHF96M +outputs: +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable} +- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk} +sources: +- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +void BOARD_BootClockFROHF96M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */ + + POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL100M +outputs: +- {id: System_clock.outFreq, value: 100 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +void BOARD_BootClockPLL100M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + + POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U), + .pllndec = SYSCON_PLL0NDEC_NDIV(4U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(2U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 100000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL150M +called_from_default_init: true +outputs: +- {id: FXCOM0_clock.outFreq, value: 48 MHz} +- {id: SYSTICK0_clock.outFreq, value: 144 MHz} +- {id: System_clock.outFreq, value: 144 MHz} +- {id: USB0_clock.outFreq, value: 48 MHz} +- {id: USB1_PHY_clock.outFreq, value: 16 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: PLL1_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_PLL_USB_OUT, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.FCCLKSEL0.sel, value: SYSCON.PLL0DIV} +- {id: SYSCON.FRGCTRL0_DIV.scale, value: '400'} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL1_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0DIV.scale, value: '2'} +- {id: SYSCON.PLL0M_MULT.scale, value: '150', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '8', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '2', locked: true} +- {id: SYSCON.PLL1CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL1M_MULT.scale, value: '18'} +- {id: SYSCON.PLL1_PDEC.scale, value: '2'} +- {id: SYSCON.SYSTICKCLKSEL0.sel, value: SYSCON.SYSTICKCLKDIV0} +- {id: SYSCON.USB0CLKDIV.scale, value: '3'} +- {id: SYSCON.USB0CLKSEL.sel, value: SYSCON.MAINCLKSELB} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +void BOARD_BootClockPLL150M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_PLL_USB_OUT_MASK; /* Enable clk_in to HS USB */ + + POWER_SetVoltageForFreq(144000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(144000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(31U), + .pllndec = SYSCON_PLL0NDEC_NDIV(8U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(1U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(150U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 150000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up PLL1 */ + CLOCK_AttachClk(kEXT_CLK_to_PLL1); /*!< Switch PLL1CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL1); /* Ensure PLL is on */ + const pll_setup_t pll1Setup = { + .pllctrl = SYSCON_PLL1CTRL_CLKEN_MASK | SYSCON_PLL1CTRL_SELI(11U) | SYSCON_PLL1CTRL_SELP(5U), + .pllndec = SYSCON_PLL1NDEC_NDIV(1U), + .pllpdec = SYSCON_PLL1PDEC_PDIV(1U), + .pllmdec = SYSCON_PLL1MDEC_MDIV(18U), + .pllRate = 144000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivSystickClk0, 0U, true); /*!< Reset SYSTICKCLKDIV0 divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivSystickClk0, 1U, false); /*!< Set SYSTICKCLKDIV0 divider to value 1 */ + #if FSL_CLOCK_DRIVER_VERSION >= MAKE_VERSION(2, 3, 4) + CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 144U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */ + #else + CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 37120U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */ + #endif + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 0U, true); /*!< Reset USB0CLKDIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 3U, false); /*!< Set USB0CLKDIV divider to value 3 */ + CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 0U, true); /*!< Reset PLL0DIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 2U, false); /*!< Set PLL0DIV divider to value 2 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */ + CLOCK_AttachClk(kMAIN_CLK_to_USB0_CLK); /*!< Switch USB0_CLK to MAIN_CLK */ + CLOCK_AttachClk(kPLL0_DIV_to_FLEXCOMM0); /*!< Switch FLEXCOMM0 to PLL0_DIV */ + CLOCK_AttachClk(kSYSTICK_DIV0_to_SYSTICK0); /*!< Switch SYSTICK0 to SYSTICK_DIV0 */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK; +#endif +} diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board/clock_config.h b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/clock_config.h new file mode 100644 index 000000000..fdd472793 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/clock_config.h @@ -0,0 +1,286 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal frequency in Hz */ +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO12M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKFRO12M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKFRO12M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFRO12M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKFRO12M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKFRO12M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKFRO12M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKFRO12M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO12M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF96M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFROHF96M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFROHF96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKFROHF96M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKFROHF96M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFROHF96M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKFROHF96M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKFROHF96M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKFROHF96M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFROHF96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKFROHF96M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFROHF96M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFROHF96M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFROHF96M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKPLL100M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKPLL100M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKPLL100M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKPLL100M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL100M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKPLL100M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKPLL100M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKPLL100M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SYSTEM_CLOCK 100000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKPLL100M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKPLL100M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKPLL100M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL100M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKPLL100M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL100M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK 144000000U /*!< Core clock frequency: 144000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKPLL150M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKPLL150M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM0_CLOCK 48000000UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKPLL150M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKPLL150M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL150M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKPLL150M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKPLL150M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKPLL150M_SYSTICK0_CLOCK 144000000UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SYSTEM_CLOCK 144000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKPLL150M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKPLL150M_USB0_CLOCK 48000000UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKPLL150M_USB1_PHY_CLOCK 16000000UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL150M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKPLL150M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL150M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board/peripherals.c b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/peripherals.c new file mode 100644 index 000000000..f3b986b6c --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/peripherals.c @@ -0,0 +1,157 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Peripherals v15.0 +processor: LPC55S28 +package_id: LPC55S28JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S28 +functionalGroups: +- name: BOARD_InitPeripherals + UUID: 61d0725d-b300-49cb-9c66-b5edfbf8ffc1 + called_from_default_init: true + selectedCore: cm33_core0 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'system' +- type_id: 'system_54b53072540eeeb8f8e9343e71f28176' +- global_system_definitions: + - user_definitions: '' + - user_includes: '' + - global_init: '' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'uart_cmsis_common' +- type_id: 'uart_cmsis_common' +- global_USART_CMSIS_common: + - quick_selection: 'default' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'gpio_adapter_common' +- type_id: 'gpio_adapter_common' +- global_gpio_adapter_common: + - quick_selection: 'default' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/*********************************************************************************************************************** + * Included files + **********************************************************************************************************************/ +#include "peripherals.h" + +/*********************************************************************************************************************** + * BOARD_InitPeripherals functional group + **********************************************************************************************************************/ +/*********************************************************************************************************************** + * DEBUG_UART initialization code + **********************************************************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +instance: +- name: 'DEBUG_UART' +- type: 'flexcomm_usart' +- mode: 'polling' +- custom_name_enabled: 'true' +- type_id: 'flexcomm_usart_2.2.0' +- functional_group: 'BOARD_InitPeripherals' +- peripheral: 'FLEXCOMM0' +- config_sets: + - usartConfig_t: + - usartConfig: + - clockSource: 'FXCOMFunctionClock' + - clockSourceFreq: 'ClocksTool_DefaultInit' + - baudRate_Bps: '115200' + - syncMode: 'kUSART_SyncModeDisabled' + - parityMode: 'kUSART_ParityDisabled' + - stopBitCount: 'kUSART_OneStopBit' + - bitCountPerChar: 'kUSART_8BitsPerChar' + - loopback: 'false' + - txWatermark: 'kUSART_TxFifo0' + - rxWatermark: 'kUSART_RxFifo1' + - enableRx: 'true' + - enableTx: 'true' + - clockPolarity: 'kUSART_RxSampleOnFallingEdge' + - enableContinuousSCLK: 'false' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ +const usart_config_t DEBUG_UART_config = { + .baudRate_Bps = 115200UL, + .syncMode = kUSART_SyncModeDisabled, + .parityMode = kUSART_ParityDisabled, + .stopBitCount = kUSART_OneStopBit, + .bitCountPerChar = kUSART_8BitsPerChar, + .loopback = false, + .txWatermark = kUSART_TxFifo0, + .rxWatermark = kUSART_RxFifo1, + .enableRx = true, + .enableTx = true, + .enableMode32k = false, + .clockPolarity = kUSART_RxSampleOnFallingEdge, + .enableContinuousSCLK = false +}; + +static void DEBUG_UART_init(void) { + /* Reset FLEXCOMM device */ + RESET_PeripheralReset(kFC0_RST_SHIFT_RSTn); + USART_Init(DEBUG_UART_PERIPHERAL, &DEBUG_UART_config, DEBUG_UART_CLOCK_SOURCE); +} + +/*********************************************************************************************************************** + * NVIC initialization code + **********************************************************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +instance: +- name: 'NVIC' +- type: 'nvic' +- mode: 'general' +- custom_name_enabled: 'false' +- type_id: 'nvic' +- functional_group: 'BOARD_InitPeripherals' +- peripheral: 'NVIC' +- config_sets: + - nvic: + - interrupt_table: [] + - interrupts: [] + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/* Empty initialization function (commented out) +static void NVIC_init(void) { +} */ + +/*********************************************************************************************************************** + * Initialization functions + **********************************************************************************************************************/ +void BOARD_InitPeripherals(void) +{ + /* Initialize components */ + DEBUG_UART_init(); +} + +/*********************************************************************************************************************** + * BOARD_InitBootPeripherals function + **********************************************************************************************************************/ +void BOARD_InitBootPeripherals(void) +{ + BOARD_InitPeripherals(); +} diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board/peripherals.h b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/peripherals.h new file mode 100644 index 000000000..3f498f4af --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/peripherals.h @@ -0,0 +1,57 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PERIPHERALS_H_ +#define _PERIPHERALS_H_ + +/*********************************************************************************************************************** + * Included files + **********************************************************************************************************************/ +#include "fsl_common.h" +#include "fsl_reset.h" +#include "fsl_usart.h" +#include "fsl_clock.h" + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ +/* Definitions for BOARD_InitPeripherals functional group */ +/* Definition of peripheral ID */ +#define DEBUG_UART_PERIPHERAL ((USART_Type *)FLEXCOMM0) +/* Definition of the clock source frequency */ +#define DEBUG_UART_CLOCK_SOURCE 48000000UL + +/*********************************************************************************************************************** + * Global variables + **********************************************************************************************************************/ +extern const usart_config_t DEBUG_UART_config; + +/*********************************************************************************************************************** + * Initialization functions + **********************************************************************************************************************/ + +void BOARD_InitPeripherals(void); + +/*********************************************************************************************************************** + * BOARD_InitBootPeripherals function + **********************************************************************************************************************/ +void BOARD_InitBootPeripherals(void); + +#if defined(__cplusplus) +} +#endif + +#endif /* _PERIPHERALS_H_ */ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board/pin_mux.c b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/pin_mux.c new file mode 100644 index 000000000..924961d42 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/pin_mux.c @@ -0,0 +1,795 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v17.0 +processor: LPC55S28 +package_id: LPC55S28JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S28 +external_user_signals: {} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_gpio.h" +#include "fsl_iocon.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitDEBUG_UARTPins(); + BOARD_InitUSBPins(); + BOARD_InitLEDsPins(); + BOARD_InitBUTTONsPins(); + BOARD_InitPins_Core0(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive, + slew_rate: standard, invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitDEBUG_UARTPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t DEBUG_UART_RX = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, DEBUG_UART_RX); + + const uint32_t DEBUG_UART_TX = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, DEBUG_UART_TX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSWD_DEBUGPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '13', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9, mode: pullDown, + slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '12', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '21', peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, identifier: DEBUG_SWD_SWO, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSWD_DEBUGPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitSWD_DEBUGPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t DEBUG_SWD_SWO = (/* Pin is configured as SWO */ + IOCON_PIO_FUNC6 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is open (disabled) */ + IOCON_PIO_ASW_DI); + /* PORT0 PIN10 (coords: 21) is configured as SWO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN, DEBUG_SWD_SWO); + + const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */ + IOCON_PIO_FUNC6 | + /* Selects pull-down function */ + IOCON_PIO_MODE_PULLDOWN | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN11 (coords: 13) is configured as SWCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK); + + const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */ + IOCON_PIO_FUNC6 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN12 (coords: 12) is configured as SWDIO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSBPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '97', peripheral: USBFSH, signal: USB_DP, pin_signal: USB0_DP} + - {pin_num: '98', peripheral: USBFSH, signal: USB_DM, pin_signal: USB0_DM} + - {pin_num: '78', peripheral: USBFSH, signal: USB_VBUS, pin_signal: PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '35', peripheral: USBHSH, signal: USB_DM, pin_signal: USB1_DM} + - {pin_num: '34', peripheral: USBHSH, signal: USB_DP, pin_signal: USB1_DP} + - {pin_num: '36', peripheral: USBHSH, signal: USB_VBUS, pin_signal: USB1_VBUS} + - {pin_num: '80', peripheral: USBHSH, signal: USB_PORTPWRN, pin_signal: PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2, mode: pullUp} + - {pin_num: '67', peripheral: USBFSH, signal: USB_PORTPWRN, pin_signal: PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2, mode: pullUp} + - {pin_num: '66', peripheral: USBFSH, signal: USB_OVERCURRENTN, pin_signal: PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28, + mode: pullUp} + - {pin_num: '65', peripheral: USBHSH, signal: USB_OVERCURRENTN, pin_signal: PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1, mode: pullUp} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSBPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitUSBPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t USB0_VBUS = (/* Pin is configured as USB0_VBUS */ + IOCON_PIO_FUNC7 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN22 (coords: 78) is configured as USB0_VBUS */ + IOCON_PinMuxSet(IOCON, BOARD_INITUSBPINS_USB0_VBUS_PORT, BOARD_INITUSBPINS_USB0_VBUS_PIN, USB0_VBUS); + + IOCON->PIO[0][28] = ((IOCON->PIO[0][28] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT028 (pin 66) is configured as USB0_OVERCURRENTN. */ + | IOCON_PIO_FUNC(PIO0_28_FUNC_ALT7) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO0_28_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO0_28_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][12] = ((IOCON->PIO[1][12] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT112 (pin 67) is configured as USB0_PORTPWRN. */ + | IOCON_PIO_FUNC(PIO1_12_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_12_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_12_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][29] = ((IOCON->PIO[1][29] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT129 (pin 80) is configured as USB1_PORTPWRN. */ + | IOCON_PIO_FUNC(PIO1_29_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_29_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_29_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][30] = ((IOCON->PIO[1][30] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT130 (pin 65) is configured as USB1_OVERCURRENTN. */ + | IOCON_PIO_FUNC(PIO1_30_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_30_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_30_DIGIMODE_DIGITAL)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLEDsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '1', peripheral: GPIO, signal: 'PIO1, 4', pin_signal: PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A, direction: OUTPUT, gpio_init_state: 'true', + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '5', peripheral: GPIO, signal: 'PIO1, 6', pin_signal: PIO1_6/FC0_TXD_SCL_MISO_WS/SD0_D3/CTIMER2_MAT1/SCT_GPI3, direction: OUTPUT, gpio_init_state: 'true', + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '9', peripheral: GPIO, signal: 'PIO1, 7', pin_signal: PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4, direction: OUTPUT, gpio_init_state: 'true', + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLEDsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitLEDsPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO1 module */ + CLOCK_EnableClock(kCLOCK_Gpio1); + + gpio_pin_config_t LED_BLUE_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO1_4 (pin 1) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config); + + gpio_pin_config_t LED_RED_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO1_6 (pin 5) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config); + + gpio_pin_config_t LED_GREEN_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO1_7 (pin 9) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config); + + const uint32_t LED_BLUE = (/* Pin is configured as PIO1_4 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN4 (coords: 1) is configured as PIO1_4 */ + IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, LED_BLUE); + + const uint32_t LED_RED = (/* Pin is configured as PIO1_6 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN6 (coords: 5) is configured as PIO1_6 */ + IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, LED_RED); + + const uint32_t LED_GREEN = (/* Pin is configured as PIO1_7 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN7 (coords: 9) is configured as PIO1_7 */ + IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, LED_GREEN); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitBUTTONsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '88', peripheral: GPIO, signal: 'PIO0, 5', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, direction: INPUT, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '64', peripheral: GPIO, signal: 'PIO1, 18', pin_signal: PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0, direction: INPUT, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '10', peripheral: GPIO, signal: 'PIO1, 9', pin_signal: PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12, direction: INPUT, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '32', peripheral: SYSCON, signal: RESET, pin_signal: RESETN} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBUTTONsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitBUTTONsPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO0 module */ + CLOCK_EnableClock(kCLOCK_Gpio0); + + /* Enables the clock for the GPIO1 module */ + CLOCK_EnableClock(kCLOCK_Gpio1); + + gpio_pin_config_t S1_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO0_5 (pin 88) */ + GPIO_PinInit(BOARD_INITBUTTONSPINS_S1_GPIO, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, &S1_config); + + gpio_pin_config_t S3_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO1_9 (pin 10) */ + GPIO_PinInit(BOARD_INITBUTTONSPINS_S3_GPIO, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, &S3_config); + + gpio_pin_config_t S2_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO1_18 (pin 64) */ + GPIO_PinInit(BOARD_INITBUTTONSPINS_S2_GPIO, BOARD_INITBUTTONSPINS_S2_PORT, BOARD_INITBUTTONSPINS_S2_PIN, &S2_config); + + const uint32_t S1 = (/* Pin is configured as PIO0_5 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN5 (coords: 88) is configured as PIO0_5 */ + IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, S1); + + const uint32_t S2 = (/* Pin is configured as PIO1_18 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN18 (coords: 64) is configured as PIO1_18 */ + IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S2_PORT, BOARD_INITBUTTONSPINS_S2_PIN, S2); + + const uint32_t S3 = (/* Pin is configured as PIO1_9 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT1 PIN9 (coords: 10) is configured as PIO1_9 */ + IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, S3); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins_Core0: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: [] + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins_Core0 + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitPins_Core0(void) +{ +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitI2SPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp, + slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, mode: inactive, slew_rate: standard, invert: disabled, + open_drain: disabled} + - {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '21', peripheral: FLEXCOMM6, signal: SCK, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, + identifier: FC6_I2S_CLK, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '87', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitI2SPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitI2SPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t FC6_I2S_CLK = (/* Pin is configured as FC6_SCK */ + IOCON_PIO_FUNC1 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN10 (coords: 21) is configured as FC6_SCK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_CLK_PORT, BOARD_INITI2SPINS_FC6_I2S_CLK_PIN, FC6_I2S_CLK); + + const uint32_t FC7_I2S_WS = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_WS_PORT, BOARD_INITI2SPINS_FC7_I2S_WS_PIN, FC7_I2S_WS); + + const uint32_t FC7_I2S_TX = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_TX_PORT, BOARD_INITI2SPINS_FC7_I2S_TX_PIN, FC7_I2S_TX); + + const uint32_t FC7_I2S_SCK = (/* Pin is configured as FC7_SCK */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_SCK_PORT, BOARD_INITI2SPINS_FC7_I2S_SCK_PIN, FC7_I2S_SCK); + + const uint32_t FC6_I2S_RX = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC2 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_RX_PORT, BOARD_INITI2SPINS_FC6_I2S_RX_PIN, FC6_I2S_RX); + + const uint32_t FC6_I2S_WS = (/* Pin is configured as FC6_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC2 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN16 (coords: 87) is configured as FC6_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_WS_PORT, BOARD_INITI2SPINS_FC6_I2S_WS_PIN, FC6_I2S_WS); + + const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SCL_PORT, BOARD_INITI2SPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL); + + const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SDA_PORT, BOARD_INITI2SPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA); + + const uint32_t MCLK = (/* Pin is configured as MCLK */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN31 (coords: 91) is configured as MCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_MCLK_PORT, BOARD_INITI2SPINS_MCLK_PIN, MCLK); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitACCELPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp, + slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '58', peripheral: GPIO, signal: 'PIO1, 19', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF, direction: INPUT, mode: inactive, + slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitACCELPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitACCELPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO1 module */ + CLOCK_EnableClock(kCLOCK_Gpio1); + + gpio_pin_config_t ACCL_INTR_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO1_19 (pin 58) */ + GPIO_PinInit(BOARD_INITACCELPINS_ACCL_INTR_GPIO, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, &ACCL_INTR_config); + + const uint32_t ACCL_INTR = (/* Pin is configured as PIO1_19 */ + IOCON_PIO_FUNC0 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is open (disabled) */ + IOCON_PIO_ASW_DI); + /* PORT1 PIN19 (coords: 58) is configured as PIO1_19 */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, ACCL_INTR); + + const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SCL_PORT, BOARD_INITACCELPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL); + + const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SDA_PORT, BOARD_INITACCELPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board/pin_mux.h b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/pin_mux.h new file mode 100644 index 000000000..2a99795ef --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board/pin_mux.h @@ -0,0 +1,433 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_29 (number 92), P8[2]/U6[13]/FC0_USART_RXD + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 29U +/*! + * @brief PORT pin mask */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 29U) +/* @} */ + +/*! @name PIO0_30 (number 94), P8[3]/U6[12]/FC0_USART_TXD + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 30U +/*! + * @brief PORT pin mask */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 30U) +/* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */ +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC6 0x06u /*!<@brief Selects pin function 6 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLDOWN 0x10u /*!<@brief Selects pull-down function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_11 (number 13), U14[4]/SWDCLK_TRGT + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 11U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 11U) +/* @} */ + +/*! @name PIO0_12 (number 12), U15[4]/D7/P7[2]/IF_SWDIO + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 12U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 12U) +/* @} */ + +/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN 10U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN_MASK (1U << 10U) +/* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Enables digital function */ +#define IOCON_PIO_DIGITAL_EN 0x0100u +/*! + * @brief Selects pin function 7 */ +#define IOCON_PIO_FUNC7 0x07u +/*! + * @brief Input function is not inverted */ +#define IOCON_PIO_INV_DI 0x00u +/*! + * @brief No addition pin function */ +#define IOCON_PIO_MODE_INACT 0x00u +/*! + * @brief Open drain is disabled */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u +/*! + * @brief Standard mode, output slew rate control is enabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO0_28_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 7. */ +#define PIO0_28_FUNC_ALT7 0x07u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO0_28_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_12_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_12_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_12_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_29_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_29_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_29_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_30_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_30_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_30_MODE_PULL_UP 0x02u + +/*! @name PIO0_22 (number 78), P10[1]/USB0_VBUS + @{ */ +#define BOARD_INITUSBPINS_USB0_VBUS_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITUSBPINS_USB0_VBUS_PIN 22U /*!<@brief PORT pin number */ +#define BOARD_INITUSBPINS_USB0_VBUS_PIN_MASK (1U << 22U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSBPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_4 (number 1), R78/P18[5]/LEDR/PWM_ARD + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN_MASK (1U << 4U) /*!<@brief GPIO pin mask */ +#define BOARD_INITLEDSPINS_LED_BLUE_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN 4U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN_MASK (1U << 4U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_6 (number 5), R80/P18[9]/LEDB/PWM_ARD + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN_MASK (1U << 6U) /*!<@brief GPIO pin mask */ +#define BOARD_INITLEDSPINS_LED_RED_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_PIN 6U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_RED_PIN_MASK (1U << 6U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_7 (number 9), R79/P18[7]/LEDG/PWM_ARD + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN_MASK (1U << 7U) /*!<@brief GPIO pin mask */ +#define BOARD_INITLEDSPINS_LED_GREEN_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN 7U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN_MASK (1U << 7U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLEDsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_5 (number 88), S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1 + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_S1_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S1_GPIO_PIN_MASK (1U << 5U) /*!<@brief GPIO pin mask */ +#define BOARD_INITBUTTONSPINS_S1_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S1_PIN 5U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_S1_PIN_MASK (1U << 5U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_18 (number 64), S2/P18[16]/P24[2]/WAKE/GPIO + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_S2_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S2_GPIO_PIN_MASK (1U << 18U) /*!<@brief GPIO pin mask */ +#define BOARD_INITBUTTONSPINS_S2_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S2_PIN 18U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_S2_PIN_MASK (1U << 18U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_9 (number 10), S3/P18[1]/PIO1_9_GPIO_ARD + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_S3_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S3_GPIO_PIN_MASK (1U << 9U) /*!<@brief GPIO pin mask */ +#define BOARD_INITBUTTONSPINS_S3_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S3_PIN 9U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_S3_PIN_MASK (1U << 9U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitBUTTONsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins_Core0(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_FUNC2 0x02u /*!<@brief Selects pin function 2 */ +#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */ +#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD + @{ */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD + @{ */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_31 (number 91), P19[7]/P19[8]/PLU_IN0/GPIO + @{ */ +#define BOARD_INITI2SPINS_MCLK_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_MCLK_PIN 31U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_MCLK_PIN_MASK (1U << 31U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_21 (number 76), P17[14]/FC7_I2S_SCK + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_20 (number 74), P17[10]/FC7_I2S_TX + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_19 (number 90), P17[12]/FC7_I2S_WS + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN 19U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN 10U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN_MASK (1U << 10U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_13 (number 2), P17[20]/FC6_I2S_RX + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN 13U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_16 (number 87), P18[17]/SD1_PWR_EN + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN 16U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN_MASK (1U << 16U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitI2SPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */ +#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD + @{ */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD + @{ */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_19 (number 58), U7[3]/P18[14]/PLU_OUT1/GPIO + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITACCELPINS_ACCL_INTR_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITACCELPINS_ACCL_INTR_GPIO_PIN_MASK (1U << 19U) /*!<@brief GPIO pin mask */ +#define BOARD_INITACCELPINS_ACCL_INTR_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_ACCL_INTR_PIN 19U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_ACCL_INTR_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitACCELPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/LPCXpresso55S69.mex b/hw/bsp/lpc55/boards/lpcxpresso55s69/LPCXpresso55S69.mex new file mode 100644 index 000000000..9e31688b7 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/LPCXpresso55S69.mex @@ -0,0 +1,1329 @@ +<?xml version="1.0" encoding= "UTF-8" ?> +<configuration name="LPCXpresso55S69" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_19 http://mcuxpresso.nxp.com/XSD/mex_configuration_19.xsd" uuid="acf73d26-2bf9-4855-b3be-26068672d98a" version="19" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_19" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> + <common> + <processor>LPC55S69</processor> + <package>LPC55S69JBD100</package> + <board>LPCXpresso55S69</board> + <board_revision>A2</board_revision> + <mcu_data>ksdk2_0</mcu_data> + <cores selected="cm33_core0"> + <core name="Cortex-M33 (Core #0)" id="cm33_core0" description=""/> + <core name="Cortex-M33 (Core #1)" id="cm33_core1" description=""/> + </cores> + <description></description> + </common> + <preferences> + <validate_boot_init_only>true</validate_boot_init_only> + <generate_code_modified_registers_only>false</generate_code_modified_registers_only> + <custom_copyright> + <text>/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +</text> + <enabled>true</enabled> + </custom_copyright> + <update_include_paths>true</update_include_paths> + <enable_parallel_routing>true</enable_parallel_routing> + <generate_registers_defines>false</generate_registers_defines> + </preferences> + <tools> + <pins name="Pins" version="17.0" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/pin_mux.c" update_enabled="true"/> + <file path="board/pin_mux.h" update_enabled="true"/> + </generated_project_files> + <pins_profile> + <processor_version>25.09.10</processor_version> + </pins_profile> + <functions_list> + <function name="BOARD_InitDEBUG_UARTPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM0" description="Peripheral FLEXCOMM0 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM0" signal="RXD_SDA_MOSI_DATA" pin_num="92" pin_signal="PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM0" signal="TXD_SCL_MISO_WS" pin_num="94" pin_signal="PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitSWD_DEBUGPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="SWD" description="Peripheral SWD signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="SWD" signal="SWCLK" pin_num="13" pin_signal="PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9"> + <pin_features> + <pin_feature name="mode" value="pullDown"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SWD" signal="SWDIO" pin_num="12" pin_signal="PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SWD" signal="SWO" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1"> + <pin_features> + <pin_feature name="identifier" value="DEBUG_SWD_SWO"/> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitUSBPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="USBFSH" description="Peripheral USBFSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="USBHSH" description="Peripheral USBHSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="USBFSH" signal="USB_DP" pin_num="97" pin_signal="USB0_DP"/> + <pin peripheral="USBFSH" signal="USB_DM" pin_num="98" pin_signal="USB0_DM"/> + <pin peripheral="USBFSH" signal="USB_VBUS" pin_num="78" pin_signal="PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="USBHSH" signal="USB_DM" pin_num="35" pin_signal="USB1_DM"/> + <pin peripheral="USBHSH" signal="USB_DP" pin_num="34" pin_signal="USB1_DP"/> + <pin peripheral="USBHSH" signal="USB_VBUS" pin_num="36" pin_signal="USB1_VBUS"/> + <pin peripheral="USBHSH" signal="USB_OVERCURRENTN" pin_num="65" pin_signal="PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBFSH" signal="USB_OVERCURRENTN" pin_num="66" pin_signal="PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBFSH" signal="USB_PORTPWRN" pin_num="67" pin_signal="PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBHSH" signal="USB_PORTPWRN" pin_num="80" pin_signal="PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitLEDsPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="GPIO" signal="PIO1, 4" pin_num="1" pin_signal="PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A"> + <pin_features> + <pin_feature name="direction" value="OUTPUT"/> + <pin_feature name="gpio_init_state" value="true"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 6" pin_num="5" pin_signal="PIO1_6/FC0_TXD_SCL_MISO_WS/SD0_D3/CTIMER2_MAT1/SCT_GPI3"> + <pin_features> + <pin_feature name="direction" value="OUTPUT"/> + <pin_feature name="gpio_init_state" value="true"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 7" pin_num="9" pin_signal="PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4"> + <pin_features> + <pin_feature name="direction" value="OUTPUT"/> + <pin_feature name="gpio_init_state" value="true"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitBUTTONsPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="GPIO" signal="PIO0, 5" pin_num="88" pin_signal="PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 18" pin_num="64" pin_signal="PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 9" pin_num="10" pin_signal="PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SYSCON" signal="RESET" pin_num="32" pin_signal="RESETN"/> + </pins> + </function> + <function name="BOARD_InitPins_Core0"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins_Core0"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins/> + </function> + <function name="BOARD_InitPins_Core1"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core1</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins_Core1"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins/> + </function> + <function name="BOARD_InitI2SPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM7" description="Peripheral FLEXCOMM7 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM6" description="Peripheral FLEXCOMM6 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="SYSCON" signal="MCLK" pin_num="91" pin_signal="PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="SCK" pin_num="76" pin_signal="PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="RXD_SDA_MOSI_DATA" pin_num="74" pin_signal="PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="TXD_SCL_MISO_WS" pin_num="90" pin_signal="PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="SCK" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1"> + <pin_features> + <pin_feature name="identifier" value="FC6_I2S_CLK"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="RXD_SDA_MOSI_DATA" pin_num="2" pin_signal="PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="TXD_SCL_MISO_WS" pin_num="87" pin_signal="PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitACCELPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitACCELPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 19" pin_num="58" pin_signal="PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + </functions_list> + </pins> + <clocks name="Clocks" version="18.0" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/clock_config.c" update_enabled="true"/> + <file path="board/clock_config.h" update_enabled="true"/> + </generated_project_files> + <clocks_profile> + <processor_version>25.09.10</processor_version> + </clocks_profile> + <clock_configurations> + <clock_configuration name="BOARD_BootClockFRO12M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources/> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="12 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings/> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockFROHF96M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="ANACTRL.fro_hf.outFreq" value="96 MHz" locked="false" enabled="false"/> + </clock_sources> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="96 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG" value="Enable" locked="false"/> + <setting id="SYSCON.MAINCLKSELA.sel" value="ANACTRL.fro_hf_clk" locked="false"/> + </clock_settings> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockPLL100M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="direction" evaluation=""> + <data>INPUT</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="direction" evaluation=""> + <data>OUTPUT</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/> + </clock_sources> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="100 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="PLL0_Mode" value="Normal" locked="false"/> + <setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/> + <setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/> + <setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL0_BYPASS" locked="false"/> + <setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL0M_MULT.scale" value="100" locked="true"/> + <setting id="SYSCON.PLL0N_DIV.scale" value="4" locked="true"/> + <setting id="SYSCON.PLL0_PDEC.scale" value="4" locked="true"/> + </clock_settings> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockPLL150M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="direction" evaluation=""> + <data>INPUT</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="direction" evaluation=""> + <data>OUTPUT</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/> + </clock_sources> + <clock_outputs> + <clock_output id="FXCOM0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/> + <clock_output id="System_clock.outFreq" value="144 MHz" locked="false" accuracy=""/> + <clock_output id="USB0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/> + <clock_output id="USB1_PHY_clock.outFreq" value="16 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="PLL0_Mode" value="Normal" locked="false"/> + <setting id="PLL1_Mode" value="Normal" locked="false"/> + <setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/> + <setting id="ENABLE_PLL_USB_OUT" value="Enabled" locked="false"/> + <setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/> + <setting id="SYSCON.FCCLKSEL0.sel" value="SYSCON.PLL0DIV" locked="false"/> + <setting id="SYSCON.FRGCTRL0_DIV.scale" value="400" locked="false"/> + <setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL1_BYPASS" locked="false"/> + <setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL0DIV.scale" value="2" locked="false"/> + <setting id="SYSCON.PLL0M_MULT.scale" value="150" locked="true"/> + <setting id="SYSCON.PLL0N_DIV.scale" value="8" locked="true"/> + <setting id="SYSCON.PLL0_PDEC.scale" value="2" locked="true"/> + <setting id="SYSCON.PLL1CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL1M_MULT.scale" value="18" locked="false"/> + <setting id="SYSCON.PLL1_PDEC.scale" value="2" locked="false"/> + <setting id="SYSCON.USB0CLKDIV.scale" value="3" locked="false"/> + <setting id="SYSCON.USB0CLKSEL.sel" value="SYSCON.MAINCLKSELB" locked="false"/> + </clock_settings> + <called_from_default_init>true</called_from_default_init> + </clock_configuration> + </clock_configurations> + </clocks> + <dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <dcdx_profile> + <processor_version>0.0.0</processor_version> + </dcdx_profile> + <dcdx_configurations/> + </dcdx> + <periphs name="Peripherals" version="15.0" enabled="true" update_project_code="true"> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="FLEXCOMM USART Driver is not found in the toolchain/IDE project. The project will not compile!" problem_level="2" source="Peripherals"> + <feature name="enabled" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="An unsupported version of the FLEXCOMM USART Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. The project might not compile correctly." problem_level="1" source="Peripherals"> + <feature name="version" evaluation="equivalent"> + <data type="Version">2.2.0</data> + </feature> + </dependency> + <dependency resourceType="Tool" resourceId="Clocks" description="The Clocks tool is required by the Peripherals tool, but it is disabled." problem_level="2" source="Peripherals"> + <feature name="enabled" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <generated_project_files> + <file path="board/peripherals.c" update_enabled="true"/> + <file path="board/peripherals.h" update_enabled="true"/> + </generated_project_files> + <peripherals_profile> + <processor_version>25.09.10</processor_version> + </peripherals_profile> + <functional_groups> + <functional_group name="BOARD_InitPeripherals_cm33_core0" uuid="61d0725d-b300-49cb-9c66-b5edfbf8ffc1" called_from_default_init="true" id_prefix="" core="cm33_core0"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="ClockOutput" resourceId="FXCOM0_clock" description="FXCOM0 clock is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals_cm33_core0"> + <feature name="frequency" evaluation="greaterThan"> + <data type="Frequency" unit="Hz">0</data> + </feature> + </dependency> + <dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_rxd" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals_cm33_core0"> + <feature name="routed" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + <dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_txd" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals_cm33_core0"> + <feature name="routed" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + </dependencies> + <instances> + <instance name="ACCEL" uuid="b999c56a-0d01-4089-9311-9224db5272f4" type="flexcomm_i2c" type_id="flexcomm_i2c_2.3.0" mode="I2C_Polling" peripheral="FLEXCOMM4" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="fsl_i2c" quick_selection="QS_I2C_Master"> + <setting name="i2c_mode" value="kI2C_Master"/> + <setting name="clockSource" value="FXCOMFunctionClock"/> + <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/> + <struct name="i2c_master_config"> + <setting name="enableMaster" value="true"/> + <setting name="baudRate_Bps" value="100000"/> + <setting name="enableTimeout" value="false"/> + <setting name="timeout_Ms" value="35"/> + </struct> + </config_set> + </instance> + <instance name="DEBUG_UART" uuid="9fb0504c-6159-43e2-98bb-51d75f06133a" type="flexcomm_usart" type_id="flexcomm_usart_2.2.0" mode="polling" peripheral="FLEXCOMM0" enabled="true" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="usartConfig_t"> + <struct name="usartConfig"> + <setting name="clockSource" value="FXCOMFunctionClock"/> + <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/> + <setting name="baudRate_Bps" value="115200"/> + <setting name="syncMode" value="kUSART_SyncModeDisabled"/> + <setting name="parityMode" value="kUSART_ParityDisabled"/> + <setting name="stopBitCount" value="kUSART_OneStopBit"/> + <setting name="bitCountPerChar" value="kUSART_8BitsPerChar"/> + <setting name="loopback" value="false"/> + <setting name="txWatermark" value="kUSART_TxFifo0"/> + <setting name="rxWatermark" value="kUSART_RxFifo1"/> + <setting name="enableRx" value="true"/> + <setting name="enableTx" value="true"/> + <setting name="clockPolarity" value="kUSART_RxSampleOnFallingEdge"/> + <setting name="enableContinuousSCLK" value="false"/> + </struct> + </config_set> + </instance> + <instance name="LEDS" uuid="f5ad3a56-404b-44cb-8abc-7b25b5551d33" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="lpc_gpio"/> + </instance> + <instance name="SW" uuid="d57ddfca-dc72-486c-a145-c7a2ab1e1a66" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="lpc_gpio"/> + </instance> + <instance name="NVIC" uuid="56761ad9-9b77-4074-917d-de0fde10cd48" type="nvic" type_id="nvic" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false"> + <config_set name="nvic"> + <array name="interrupt_table"/> + <array name="interrupts"/> + </config_set> + </instance> + </instances> + </functional_group> + <functional_group name="BOARD_InitPeripherals_cm33_core1" uuid="e2041cd4-ebb6-45a5-807f-e0c2dc047d48" called_from_default_init="false" id_prefix="" core="cm33_core1"> + <description></description> + <options/> + <dependencies/> + <instances> + <instance name="NVIC_2" uuid="db546092-4c45-40af-938a-8cc58edd1c4f" type="nvic" type_id="nvic" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false"> + <config_set name="nvic"> + <array name="interrupt_table"/> + <array name="interrupts"/> + </config_set> + </instance> + </instances> + </functional_group> + </functional_groups> + <components> + <component name="system" uuid="905d2747-654a-47d9-91f9-81a5c6f9c407" type_id="system"> + <config_set_global name="global_system_definitions"> + <setting name="user_definitions" value=""/> + <setting name="user_includes" value=""/> + <setting name="global_init" value=""/> + </config_set_global> + </component> + <component name="msg" uuid="64cbcd7c-424d-4baf-9681-a60878969fb6" type_id="msg"> + <config_set_global name="global_messages"/> + </component> + <component name="generic_can" uuid="b9b018dd-ef4e-41f6-b456-f91b855cb391" type_id="generic_can"> + <config_set_global name="global_can"/> + </component> + <component name="uart_cmsis_common" uuid="bafa6375-9184-4272-8102-06ea086041d7" type_id="uart_cmsis_common"> + <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/> + </component> + <component name="generic_uart" uuid="1710dc7f-381f-4b37-8f78-0fd2f923b3ac" type_id="generic_uart"> + <config_set_global name="global_uart"/> + </component> + <component name="generic_enet" uuid="c7fc4395-b141-4b13-a326-4145e765b2b7" type_id="generic_enet"> + <config_set_global name="global_enet"/> + </component> + <component name="gpio_adapter_common" uuid="b6ee89c2-4c58-4181-94dc-af13d8ae8ea5" type_id="gpio_adapter_common"> + <config_set_global name="global_gpio_adapter_common" quick_selection="default"/> + </component> + </components> + </periphs> + <tee name="TEE" version="10.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <tee_profile> + <processor_version>0.0.0</processor_version> + <tool_options> + <option id="_output_type_" value="c_code"/> + <option id="_legacy_source_names_" value="yes"/> + </tool_options> + </tee_profile> + <functional_group name="BOARD_InitTrustZone" called_from_default_init="true" id_prefix="" prefix_user_defined="true"> + <description></description> + <options/> + <ahb> + <relative_region start="0" size="655360" security="s_priv" memory="PROGRAM_FLASH"/> + <relative_region start="0" size="131072" security="s_priv" memory="BootROM"/> + <relative_region start="0" size="32768" security="s_priv" memory="SRAMX"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM0"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM1"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM2"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM3"/> + <relative_region start="0" size="16384" security="s_priv" memory="SRAM4"/> + <relative_region start="0" size="16384" security="s_priv" memory="AHBperipherals_port10_ahb_secure_ctrl_area"/> + <relative_region start="0" size="16384" security="s_priv" memory="USB_RAM"/> + <masters> + <master id="HASH" security="ns_user"/> + <master id="MCM33C" security="ns_user"/> + <master id="MCM33S" security="ns_user"/> + <master id="PQ" security="ns_user"/> + <master id="SDIO" security="ns_user"/> + <master id="SDMA0" security="ns_user"/> + <master id="SDMA1" security="ns_user"/> + <master id="USBFSD" security="ns_user"/> + <master id="USBFSH" security="ns_user"/> + </masters> + <peripherals> + <peripheral id="ADC0" security="s_priv"/> + <peripheral id="AHB_SECURE_CTRL" security="s_priv"/> + <peripheral id="ANACTRL" security="s_priv"/> + <peripheral id="CASPER" security="s_priv"/> + <peripheral id="CRC_ENGINE" security="s_priv"/> + <peripheral id="CTIMER0" security="s_priv"/> + <peripheral id="CTIMER1" security="s_priv"/> + <peripheral id="CTIMER2" security="s_priv"/> + <peripheral id="CTIMER3" security="s_priv"/> + <peripheral id="CTIMER4" security="s_priv"/> + <peripheral id="DBGMAILBOX" security="s_priv"/> + <peripheral id="DMA0" security="s_priv"/> + <peripheral id="DMA1" security="s_priv"/> + <peripheral id="FLASH" security="s_priv"/> + <peripheral id="FLEXCOMM0" security="s_priv"/> + <peripheral id="FLEXCOMM1" security="s_priv"/> + <peripheral id="FLEXCOMM2" security="s_priv"/> + <peripheral id="FLEXCOMM3" security="s_priv"/> + <peripheral id="FLEXCOMM4" security="s_priv"/> + <peripheral id="FLEXCOMM5" security="s_priv"/> + <peripheral id="FLEXCOMM6" security="s_priv"/> + <peripheral id="FLEXCOMM7" security="s_priv"/> + <peripheral id="GINT0" security="s_priv"/> + <peripheral id="GINT1" security="s_priv"/> + <peripheral id="GPIO" security="s_priv"/> + <peripheral id="HASHCRYPT" security="s_priv"/> + <peripheral id="INPUTMUX" security="s_priv"/> + <peripheral id="IOCON" security="s_priv"/> + <peripheral id="MAILBOX" security="s_priv"/> + <peripheral id="MRT0" security="s_priv"/> + <peripheral id="OSTIMER" security="s_priv"/> + <peripheral id="PINT" security="s_priv"/> + <peripheral id="PLU" security="s_priv"/> + <peripheral id="PMC" security="s_priv"/> + <peripheral id="POWERQUAD" security="s_priv"/> + <peripheral id="PRINCE" security="s_priv"/> + <peripheral id="PUF" security="s_priv"/> + <peripheral id="RNG" security="s_priv"/> + <peripheral id="RTC" security="s_priv"/> + <peripheral id="SCT0" security="s_priv"/> + <peripheral id="SDIF" security="s_priv"/> + <peripheral id="SECGPIO" security="s_priv"/> + <peripheral id="SECPINT" security="s_priv"/> + <peripheral id="SPI8" security="s_priv"/> + <peripheral id="SYSCON" security="s_priv"/> + <peripheral id="SYSCTL" security="s_priv"/> + <peripheral id="USB0" security="s_priv"/> + <peripheral id="USBFSH" security="s_priv"/> + <peripheral id="USBHSD" security="s_priv"/> + <peripheral id="USBHSH" security="s_priv"/> + <peripheral id="USBPHY" security="s_priv"/> + <peripheral id="UTICK0" security="s_priv"/> + <peripheral id="WWDT" security="s_priv"/> + </peripherals> + <interrupts> + <masking> + <interrupt id="acmp_capt_irq" masked="Masked"/> + <interrupt id="adc_irq" masked="Masked"/> + <interrupt id="casper_irq" masked="Masked"/> + <interrupt id="ctimer0_irq" masked="Masked"/> + <interrupt id="ctimer1_irq" masked="Masked"/> + <interrupt id="ctimer2_irq" masked="Masked"/> + <interrupt id="ctimer3_irq" masked="Masked"/> + <interrupt id="ctimer4_irq" masked="Masked"/> + <interrupt id="flexcomm0_irq" masked="Masked"/> + <interrupt id="flexcomm1_irq" masked="Masked"/> + <interrupt id="flexcomm2_irq" masked="Masked"/> + <interrupt id="flexcomm3_irq" masked="Masked"/> + <interrupt id="flexcomm4_irq" masked="Masked"/> + <interrupt id="flexcomm5_irq" masked="Masked"/> + <interrupt id="flexcomm6_irq" masked="Masked"/> + <interrupt id="flexcomm7_irq" masked="Masked"/> + <interrupt id="global_irq0" masked="Masked"/> + <interrupt id="global_irq1" masked="Masked"/> + <interrupt id="lspi_hs_irq" masked="Masked"/> + <interrupt id="mailbox_irq" masked="Masked"/> + <interrupt id="mrt_irq" masked="Masked"/> + <interrupt id="os_event_irq" masked="Masked"/> + <interrupt id="pin_int4" masked="Masked"/> + <interrupt id="pin_int5" masked="Masked"/> + <interrupt id="pin_int6" masked="Masked"/> + <interrupt id="pin_int7" masked="Masked"/> + <interrupt id="pin_irq0" masked="Masked"/> + <interrupt id="pin_irq1" masked="Masked"/> + <interrupt id="pin_irq2" masked="Masked"/> + <interrupt id="pin_irq3" masked="Masked"/> + <interrupt id="plu_irq" masked="Masked"/> + <interrupt id="pq_irq" masked="Masked"/> + <interrupt id="qddkey_irq" masked="Masked"/> + <interrupt id="rtc_irq" masked="Masked"/> + <interrupt id="sct_irq" masked="Masked"/> + <interrupt id="sdio_irq" masked="Masked"/> + <interrupt id="sdma0_irq" masked="Masked"/> + <interrupt id="sdma1_irq" masked="Masked"/> + <interrupt id="sec_hypervisor_call_irq" masked="Masked"/> + <interrupt id="sec_int0" masked="Masked"/> + <interrupt id="sec_int1" masked="Masked"/> + <interrupt id="sec_vio_irq" masked="Masked"/> + <interrupt id="sha_irq" masked="Masked"/> + <interrupt id="sys_irq" masked="Masked"/> + <interrupt id="usb0_irq" masked="Masked"/> + <interrupt id="usb0_needclk_irq" masked="Masked"/> + <interrupt id="usb1_irq" masked="Masked"/> + <interrupt id="usb1_needclk_irq" masked="Masked"/> + <interrupt id="usb1_utmi_irq" masked="Masked"/> + <interrupt id="utick_irq" masked="Masked"/> + </masking> + <security> + <interrupt id="acmp_capt_irq" secure="Secure"/> + <interrupt id="adc_irq" secure="Secure"/> + <interrupt id="casper_irq" secure="Secure"/> + <interrupt id="ctimer0_irq" secure="Secure"/> + <interrupt id="ctimer1_irq" secure="Secure"/> + <interrupt id="ctimer2_irq" secure="Secure"/> + <interrupt id="ctimer3_irq" secure="Secure"/> + <interrupt id="ctimer4_irq" secure="Secure"/> + <interrupt id="flexcomm0_irq" secure="Secure"/> + <interrupt id="flexcomm1_irq" secure="Secure"/> + <interrupt id="flexcomm2_irq" secure="Secure"/> + <interrupt id="flexcomm3_irq" secure="Secure"/> + <interrupt id="flexcomm4_irq" secure="Secure"/> + <interrupt id="flexcomm5_irq" secure="Secure"/> + <interrupt id="flexcomm6_irq" secure="Secure"/> + <interrupt id="flexcomm7_irq" secure="Secure"/> + <interrupt id="global_irq0" secure="Secure"/> + <interrupt id="global_irq1" secure="Secure"/> + <interrupt id="lspi_hs_irq" secure="Secure"/> + <interrupt id="mailbox_irq" secure="Secure"/> + <interrupt id="mrt_irq" secure="Secure"/> + <interrupt id="os_event_irq" secure="Secure"/> + <interrupt id="pin_int4" secure="Secure"/> + <interrupt id="pin_int5" secure="Secure"/> + <interrupt id="pin_int6" secure="Secure"/> + <interrupt id="pin_int7" secure="Secure"/> + <interrupt id="pin_irq0" secure="Secure"/> + <interrupt id="pin_irq1" secure="Secure"/> + <interrupt id="pin_irq2" secure="Secure"/> + <interrupt id="pin_irq3" secure="Secure"/> + <interrupt id="plu_irq" secure="Secure"/> + <interrupt id="pq_irq" secure="Secure"/> + <interrupt id="qddkey_irq" secure="Secure"/> + <interrupt id="rtc_irq" secure="Secure"/> + <interrupt id="sct_irq" secure="Secure"/> + <interrupt id="sdio_irq" secure="Secure"/> + <interrupt id="sdma0_irq" secure="Secure"/> + <interrupt id="sdma1_irq" secure="Secure"/> + <interrupt id="sec_hypervisor_call_irq" secure="Secure"/> + <interrupt id="sec_int0" secure="Secure"/> + <interrupt id="sec_int1" secure="Secure"/> + <interrupt id="sec_vio_irq" secure="Secure"/> + <interrupt id="sha_irq" secure="Secure"/> + <interrupt id="sys_irq" secure="Secure"/> + <interrupt id="usb0_irq" secure="Secure"/> + <interrupt id="usb0_needclk_irq" secure="Secure"/> + <interrupt id="usb1_irq" secure="Secure"/> + <interrupt id="usb1_needclk_irq" secure="Secure"/> + <interrupt id="usb1_utmi_irq" secure="Secure"/> + <interrupt id="utick_irq" secure="Secure"/> + </security> + </interrupts> + <ports> + <port id="pio0"> + <pin_mask id="0" masked="Masked"/> + <pin_mask id="1" masked="Masked"/> + <pin_mask id="10" masked="Masked"/> + <pin_mask id="11" masked="Masked"/> + <pin_mask id="12" masked="Masked"/> + <pin_mask id="13" masked="Masked"/> + <pin_mask id="14" masked="Masked"/> + <pin_mask id="15" masked="Masked"/> + <pin_mask id="16" masked="Masked"/> + <pin_mask id="17" masked="Masked"/> + <pin_mask id="18" masked="Masked"/> + <pin_mask id="19" masked="Masked"/> + <pin_mask id="2" masked="Masked"/> + <pin_mask id="20" masked="Masked"/> + <pin_mask id="21" masked="Masked"/> + <pin_mask id="22" masked="Masked"/> + <pin_mask id="23" masked="Masked"/> + <pin_mask id="24" masked="Masked"/> + <pin_mask id="25" masked="Masked"/> + <pin_mask id="26" masked="Masked"/> + <pin_mask id="27" masked="Masked"/> + <pin_mask id="28" masked="Masked"/> + <pin_mask id="29" masked="Masked"/> + <pin_mask id="3" masked="Masked"/> + <pin_mask id="30" masked="Masked"/> + <pin_mask id="31" masked="Masked"/> + <pin_mask id="4" masked="Masked"/> + <pin_mask id="5" masked="Masked"/> + <pin_mask id="6" masked="Masked"/> + <pin_mask id="7" masked="Masked"/> + <pin_mask id="8" masked="Masked"/> + <pin_mask id="9" masked="Masked"/> + </port> + <port id="pio1"> + <pin_mask id="0" masked="Masked"/> + <pin_mask id="1" masked="Masked"/> + <pin_mask id="10" masked="Masked"/> + <pin_mask id="11" masked="Masked"/> + <pin_mask id="12" masked="Masked"/> + <pin_mask id="13" masked="Masked"/> + <pin_mask id="14" masked="Masked"/> + <pin_mask id="15" masked="Masked"/> + <pin_mask id="16" masked="Masked"/> + <pin_mask id="17" masked="Masked"/> + <pin_mask id="18" masked="Masked"/> + <pin_mask id="19" masked="Masked"/> + <pin_mask id="2" masked="Masked"/> + <pin_mask id="20" masked="Masked"/> + <pin_mask id="21" masked="Masked"/> + <pin_mask id="22" masked="Masked"/> + <pin_mask id="23" masked="Masked"/> + <pin_mask id="24" masked="Masked"/> + <pin_mask id="25" masked="Masked"/> + <pin_mask id="26" masked="Masked"/> + <pin_mask id="27" masked="Masked"/> + <pin_mask id="28" masked="Masked"/> + <pin_mask id="29" masked="Masked"/> + <pin_mask id="3" masked="Masked"/> + <pin_mask id="30" masked="Masked"/> + <pin_mask id="31" masked="Masked"/> + <pin_mask id="4" masked="Masked"/> + <pin_mask id="5" masked="Masked"/> + <pin_mask id="6" masked="Masked"/> + <pin_mask id="7" masked="Masked"/> + <pin_mask id="8" masked="Masked"/> + <pin_mask id="9" masked="Masked"/> + </port> + </ports> + </ahb> + <saus> + <sau enabled="true" all_non_secure="false" generate_code_for_disabled_regions="false"> + <region start="0" size="268435456" security="ns" enabled="true" index="0"/> + <region start="536870912" size="3221225472" security="ns" enabled="true" index="1"/> + <region start="0" size="32" security="ns" enabled="false" index="2"/> + <region start="0" size="32" security="ns" enabled="false" index="3"/> + <region start="0" size="32" security="ns" enabled="false" index="4"/> + <region start="0" size="32" security="ns" enabled="false" index="5"/> + <region start="0" size="32" security="ns" enabled="false" index="6"/> + <region start="0" size="32" security="ns" enabled="false" index="7"/> + </sau> + </saus> + <global_options> + <option id="AIRCR_PRIS" value="no"/> + <option id="AIRCR_BFHFNMINS" value="no"/> + <option id="AIRCR_SYSRESETREQS" value="no"/> + <option id="SCR_SLEEPDEEPS" value="no"/> + <option id="SHCSR_SECUREFAULTENA" value="no"/> + <option id="CPACR_CP0" value="3"/> + <option id="CPACR_CP1" value="3"/> + <option id="CPACR_CP2" value="0"/> + <option id="CPACR_CP3" value="0"/> + <option id="CPACR_CP4" value="0"/> + <option id="CPACR_CP5" value="0"/> + <option id="CPACR_CP6" value="0"/> + <option id="CPACR_CP7" value="0"/> + <option id="CPACR_CP10" value="3"/> + <option id="CPACR_CP11" value="3"/> + <option id="NSACR_CP0" value="yes"/> + <option id="NSACR_CP1" value="yes"/> + <option id="NSACR_CP2" value="no"/> + <option id="NSACR_CP3" value="no"/> + <option id="NSACR_CP4" value="no"/> + <option id="NSACR_CP5" value="no"/> + <option id="NSACR_CP6" value="no"/> + <option id="NSACR_CP7" value="no"/> + <option id="NSACR_CP10" value="yes"/> + <option id="NSACR_CP11" value="yes"/> + <option id="CPPWR_SU0" value="no"/> + <option id="CPPWR_SUS0" value="no"/> + <option id="CPPWR_SU1" value="no"/> + <option id="CPPWR_SUS1" value="no"/> + <option id="CPPWR_SU2" value="no"/> + <option id="CPPWR_SUS2" value="no"/> + <option id="CPPWR_SU3" value="no"/> + <option id="CPPWR_SUS3" value="no"/> + <option id="CPPWR_SU4" value="no"/> + <option id="CPPWR_SUS4" value="no"/> + <option id="CPPWR_SU5" value="no"/> + <option id="CPPWR_SUS5" value="no"/> + <option id="CPPWR_SU6" value="no"/> + <option id="CPPWR_SUS6" value="no"/> + <option id="CPPWR_SU7" value="no"/> + <option id="CPPWR_SUS7" value="no"/> + <option id="CPPWR_SU10" value="no"/> + <option id="CPPWR_SUS10" value="no"/> + <option id="CPPWR_SU11" value="no"/> + <option id="CPPWR_SUS11" value="no"/> + <option id="SEC_GPIO_MASK0_LOCK" value="no"/> + <option id="SEC_GPIO_MASK1_LOCK" value="no"/> + <option id="SEC_CPU1_INT_MASK0_LOCK" value="no"/> + <option id="SEC_CPU1_INT_MASK1_LOCK" value="no"/> + <option id="MASTER_SEC_LEVEL_LOCK" value="no"/> + <option id="CPU0_LOCK_NS_VTOR" value="no"/> + <option id="CPU0_LOCK_NS_MPU" value="no"/> + <option id="CPU0_LOCK_S_VTAIRCR" value="no"/> + <option id="CPU0_LOCK_S_MPU" value="no"/> + <option id="CPU0_LOCK_SAU" value="no"/> + <option id="CPU0_LOCK_REG_LOCK" value="no"/> + <option id="CPU1_LOCK_NS_VTOR" value="no"/> + <option id="CPU1_LOCK_NS_MPU" value="no"/> + <option id="CPU1_LOCK_REG_LOCK" value="no"/> + <option id="AHB_MISC_CTRL_REG_ENABLE_SECURE_CHECKING" value="yes"/> + <option id="AHB_MISC_CTRL_REG_ENABLE_S_PRIV_CHECK" value="yes"/> + <option id="AHB_MISC_CTRL_REG_ENABLE_NS_PRIV_CHECK" value="yes"/> + <option id="AHB_MISC_CTRL_REG_DISABLE_VIOLATION_ABORT" value="no"/> + <option id="AHB_MISC_CTRL_REG_DISABLE_SIMPLE_MASTER_STRICT_MODE" value="no"/> + <option id="AHB_MISC_CTRL_REG_DISABLE_SMART_MASTER_STRICT_MODE" value="no"/> + <option id="AHB_MISC_CTRL_REG_IDAU_ALL_NS" value="no"/> + <option id="AHB_MISC_CTRL_REG_WRITE_LOCK" value="yes"/> + </global_options> + <mpus> + <mpu enabled="false" priv_default_map="false" handler_enabled="false" id="s" generate_code_for_disabled_regions="false"> + <attributes> + <group index="0" id="Code" memory_type="normal" device="nGnRE"/> + <group index="1" id="RAM" memory_type="normal" device="nGnRE"/> + <group index="2" id="Peripheral" memory_type="device" device="nGnRE"/> + <group index="3" id="3" memory_type="device" device="nGnRE"/> + <group index="4" id="4" memory_type="device" device="nGnRE"/> + <group index="5" id="5" memory_type="device" device="nGnRE"/> + <group index="6" id="6" memory_type="device" device="nGnRE"/> + <group index="7" id="7" memory_type="device" device="nGnRE"/> + </attributes> + <regions> + <region start="0" size="32" security="priv" enabled="false" index="0" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="1" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="2" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="3" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="4" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="5" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="6" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="7" executable="false" read_only="false" attributes_index="0"/> + </regions> + </mpu> + <mpu enabled="false" priv_default_map="false" handler_enabled="false" id="ns" generate_code_for_disabled_regions="false"> + <attributes> + <group index="0" id="Code" memory_type="normal" device="nGnRE"/> + <group index="1" id="RAM" memory_type="normal" device="nGnRE"/> + <group index="2" id="Peripheral" memory_type="device" device="nGnRE"/> + <group index="3" id="3" memory_type="device" device="nGnRE"/> + <group index="4" id="4" memory_type="device" device="nGnRE"/> + <group index="5" id="5" memory_type="device" device="nGnRE"/> + <group index="6" id="6" memory_type="device" device="nGnRE"/> + <group index="7" id="7" memory_type="device" device="nGnRE"/> + </attributes> + <regions> + <region start="0" size="32" security="priv" enabled="false" index="0" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="1" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="2" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="3" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="4" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="5" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="6" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="7" executable="false" read_only="false" attributes_index="0"/> + </regions> + </mpu> + </mpus> + </functional_group> + </tee> + </tools> +</configuration> diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake index f46775b27..59f7d6329 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake @@ -2,9 +2,15 @@ set(MCU_VARIANT LPC55S69) set(MCU_CORE LPC55S69_cm33_core0) set(JLINK_DEVICE LPC55S69_M33_0) +set(JLINK_OPTION "-USB 000727648789") + set(PYOCD_TARGET LPC55S69) set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) +# device highspeed, host fullspeed +set(RHPORT_DEVICE 1) +set(RHPORT_HOST 0) + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S69JBD100_cm33_core0 diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h index 61b47646f..3b81411a1 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h @@ -36,34 +36,22 @@ extern "C" { #endif -// LED -#define LED_PORT 1 -#define LED_PIN 6 +// LED: use red LED from generated pin_mux +#define LED_PORT BOARD_INITLEDSPINS_LED_RED_PORT +#define LED_PIN BOARD_INITLEDSPINS_LED_RED_PIN #define LED_STATE_ON 0 -// WAKE button -#define BUTTON_PORT 1 -#define BUTTON_PIN 18 +// WAKE button: use S2 from generated pin_mux +#define BUTTON_PORT BOARD_INITBUTTONSPINS_S2_PORT +#define BUTTON_PIN BOARD_INITBUTTONSPINS_S2_PIN #define BUTTON_STATE_ACTIVE 0 // UART #define UART_DEV USART0 -#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN // XTAL #define XTAL0_CLK_HZ (16 * 1000 * 1000U) -// Power switch -#define USBFS_POWER_PORT 1 -#define USBFS_POWER_PIN 12 -#define USBFS_POWER_STATE_ON 0 - -#define USBHS_POWER_PORT 1 -#define USBHS_POWER_PIN 29 -#define USBHS_POWER_STATE_ON 0 - - #ifdef __cplusplus } #endif diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk index 73edc88a9..e92c46f05 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk @@ -1,9 +1,19 @@ MCU_VARIANT = LPC55S69 MCU_CORE = LPC55S69_cm33_core0 -PORT ?= 1 + +# device highspeed, host fullspeed +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 CFLAGS += -DCPU_LPC55S69JBD100_cm33_core0 +SRC_C += \ + $(TOP)/$(BOARD_PATH)/board/clock_config.c \ + $(TOP)/$(BOARD_PATH)/board/pin_mux.c \ + $(TOP)/$(BOARD_PATH)/board/peripherals.c + +INC += $(TOP)/$(BOARD_PATH)/board + JLINK_DEVICE = LPC55S69 PYOCD_TARGET = LPC55S69 diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board/clock_config.c b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/clock_config.c new file mode 100644 index 000000000..99a738f18 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/clock_config.c @@ -0,0 +1,328 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to set up clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v18.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S69 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_power.h" +#include "fsl_clock.h" +#include "clock_config.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockPLL150M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: System_clock.outFreq, value: 12 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF96M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFROHF96M +outputs: +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable} +- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk} +sources: +- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +void BOARD_BootClockFROHF96M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */ + + POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL100M +outputs: +- {id: System_clock.outFreq, value: 100 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +void BOARD_BootClockPLL100M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + + POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U), + .pllndec = SYSCON_PLL0NDEC_NDIV(4U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(2U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 100000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL150M +called_from_default_init: true +outputs: +- {id: FXCOM0_clock.outFreq, value: 48 MHz} +- {id: System_clock.outFreq, value: 144 MHz} +- {id: USB0_clock.outFreq, value: 48 MHz} +- {id: USB1_PHY_clock.outFreq, value: 16 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: PLL1_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_PLL_USB_OUT, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.FCCLKSEL0.sel, value: SYSCON.PLL0DIV} +- {id: SYSCON.FRGCTRL0_DIV.scale, value: '400'} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL1_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0DIV.scale, value: '2'} +- {id: SYSCON.PLL0M_MULT.scale, value: '150', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '8', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '2', locked: true} +- {id: SYSCON.PLL1CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL1M_MULT.scale, value: '18'} +- {id: SYSCON.PLL1_PDEC.scale, value: '2'} +- {id: SYSCON.USB0CLKDIV.scale, value: '3'} +- {id: SYSCON.USB0CLKSEL.sel, value: SYSCON.MAINCLKSELB} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +void BOARD_BootClockPLL150M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_PLL_USB_OUT_MASK; /* Enable clk_in to HS USB */ + + POWER_SetVoltageForFreq(144000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(144000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(31U), + .pllndec = SYSCON_PLL0NDEC_NDIV(8U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(1U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(150U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 150000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up PLL1 */ + CLOCK_AttachClk(kEXT_CLK_to_PLL1); /*!< Switch PLL1CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL1); /* Ensure PLL is on */ + const pll_setup_t pll1Setup = { + .pllctrl = SYSCON_PLL1CTRL_CLKEN_MASK | SYSCON_PLL1CTRL_SELI(11U) | SYSCON_PLL1CTRL_SELP(5U), + .pllndec = SYSCON_PLL1NDEC_NDIV(1U), + .pllpdec = SYSCON_PLL1PDEC_PDIV(1U), + .pllmdec = SYSCON_PLL1MDEC_MDIV(18U), + .pllRate = 144000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */ + + /*!< Set up dividers */ + #if FSL_CLOCK_DRIVER_VERSION >= MAKE_VERSION(2, 3, 4) + CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 144U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */ + #else + CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 37120U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */ + #endif + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 0U, true); /*!< Reset USB0CLKDIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 3U, false); /*!< Set USB0CLKDIV divider to value 3 */ + CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 0U, true); /*!< Reset PLL0DIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 2U, false); /*!< Set PLL0DIV divider to value 2 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */ + CLOCK_AttachClk(kMAIN_CLK_to_USB0_CLK); /*!< Switch USB0_CLK to MAIN_CLK */ + CLOCK_AttachClk(kPLL0_DIV_to_FLEXCOMM0); /*!< Switch FLEXCOMM0 to PLL0_DIV */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK; +#endif +} diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board/clock_config.h b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/clock_config.h new file mode 100644 index 000000000..9112ede78 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/clock_config.h @@ -0,0 +1,290 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal frequency in Hz */ +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO12M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKFRO12M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKFRO12M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFRO12M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKFRO12M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKFRO12M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKFRO12M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKFRO12M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO12M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF96M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFROHF96M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFROHF96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKFROHF96M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKFROHF96M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFROHF96M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKFROHF96M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKFROHF96M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKFROHF96M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFROHF96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKFROHF96M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFROHF96M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFROHF96M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFROHF96M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKPLL100M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKPLL100M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKPLL100M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKPLL100M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL100M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKPLL100M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKPLL100M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKPLL100M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SYSTEM_CLOCK 100000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKPLL100M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKPLL100M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKPLL100M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL100M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKPLL100M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL100M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK 144000000U /*!< Core clock frequency: 144000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKPLL150M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKPLL150M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM0_CLOCK 48000000UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKPLL150M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKPLL150M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL150M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKPLL150M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKPLL150M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKPLL150M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SYSTEM_CLOCK 144000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKPLL150M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKPLL150M_USB0_CLOCK 48000000UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKPLL150M_USB1_PHY_CLOCK 16000000UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL150M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKPLL150M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL150M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board/peripherals.c b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/peripherals.c new file mode 100644 index 000000000..890a20fc6 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/peripherals.c @@ -0,0 +1,160 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Peripherals v15.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S69 +functionalGroups: +- name: BOARD_InitPeripherals_cm33_core0 + UUID: 61d0725d-b300-49cb-9c66-b5edfbf8ffc1 + called_from_default_init: true + selectedCore: cm33_core0 +- name: BOARD_InitPeripherals_cm33_core1 + UUID: e2041cd4-ebb6-45a5-807f-e0c2dc047d48 + selectedCore: cm33_core1 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'system' +- type_id: 'system' +- global_system_definitions: + - user_definitions: '' + - user_includes: '' + - global_init: '' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'uart_cmsis_common' +- type_id: 'uart_cmsis_common' +- global_USART_CMSIS_common: + - quick_selection: 'default' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'gpio_adapter_common' +- type_id: 'gpio_adapter_common' +- global_gpio_adapter_common: + - quick_selection: 'default' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/*********************************************************************************************************************** + * Included files + **********************************************************************************************************************/ +#include "peripherals.h" + +/*********************************************************************************************************************** + * BOARD_InitPeripherals_cm33_core0 functional group + **********************************************************************************************************************/ +/*********************************************************************************************************************** + * DEBUG_UART initialization code + **********************************************************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +instance: +- name: 'DEBUG_UART' +- type: 'flexcomm_usart' +- mode: 'polling' +- custom_name_enabled: 'true' +- type_id: 'flexcomm_usart_2.2.0' +- functional_group: 'BOARD_InitPeripherals_cm33_core0' +- peripheral: 'FLEXCOMM0' +- config_sets: + - usartConfig_t: + - usartConfig: + - clockSource: 'FXCOMFunctionClock' + - clockSourceFreq: 'ClocksTool_DefaultInit' + - baudRate_Bps: '115200' + - syncMode: 'kUSART_SyncModeDisabled' + - parityMode: 'kUSART_ParityDisabled' + - stopBitCount: 'kUSART_OneStopBit' + - bitCountPerChar: 'kUSART_8BitsPerChar' + - loopback: 'false' + - txWatermark: 'kUSART_TxFifo0' + - rxWatermark: 'kUSART_RxFifo1' + - enableRx: 'true' + - enableTx: 'true' + - clockPolarity: 'kUSART_RxSampleOnFallingEdge' + - enableContinuousSCLK: 'false' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ +const usart_config_t DEBUG_UART_config = { + .baudRate_Bps = 115200UL, + .syncMode = kUSART_SyncModeDisabled, + .parityMode = kUSART_ParityDisabled, + .stopBitCount = kUSART_OneStopBit, + .bitCountPerChar = kUSART_8BitsPerChar, + .loopback = false, + .txWatermark = kUSART_TxFifo0, + .rxWatermark = kUSART_RxFifo1, + .enableRx = true, + .enableTx = true, + .enableMode32k = false, + .clockPolarity = kUSART_RxSampleOnFallingEdge, + .enableContinuousSCLK = false +}; + +static void DEBUG_UART_init(void) { + /* Reset FLEXCOMM device */ + RESET_PeripheralReset(kFC0_RST_SHIFT_RSTn); + USART_Init(DEBUG_UART_PERIPHERAL, &DEBUG_UART_config, DEBUG_UART_CLOCK_SOURCE); +} + +/*********************************************************************************************************************** + * NVIC initialization code + **********************************************************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +instance: +- name: 'NVIC' +- type: 'nvic' +- mode: 'general' +- custom_name_enabled: 'false' +- type_id: 'nvic' +- functional_group: 'BOARD_InitPeripherals_cm33_core0' +- peripheral: 'NVIC' +- config_sets: + - nvic: + - interrupt_table: [] + - interrupts: [] + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/* Empty initialization function (commented out) +static void NVIC_init(void) { +} */ + +/*********************************************************************************************************************** + * Initialization functions + **********************************************************************************************************************/ +void BOARD_InitPeripherals_cm33_core0(void) +{ + /* Initialize components */ + DEBUG_UART_init(); +} + +/*********************************************************************************************************************** + * BOARD_InitBootPeripherals function + **********************************************************************************************************************/ +void BOARD_InitBootPeripherals(void) +{ + BOARD_InitPeripherals_cm33_core0(); +} diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board/peripherals.h b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/peripherals.h new file mode 100644 index 000000000..fc4d72c33 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/peripherals.h @@ -0,0 +1,57 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PERIPHERALS_H_ +#define _PERIPHERALS_H_ + +/*********************************************************************************************************************** + * Included files + **********************************************************************************************************************/ +#include "fsl_common.h" +#include "fsl_reset.h" +#include "fsl_usart.h" +#include "fsl_clock.h" + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ +/* Definitions for BOARD_InitPeripherals_cm33_core0 functional group */ +/* Definition of peripheral ID */ +#define DEBUG_UART_PERIPHERAL ((USART_Type *)FLEXCOMM0) +/* Definition of the clock source frequency */ +#define DEBUG_UART_CLOCK_SOURCE 48000000UL + +/*********************************************************************************************************************** + * Global variables + **********************************************************************************************************************/ +extern const usart_config_t DEBUG_UART_config; + +/*********************************************************************************************************************** + * Initialization functions + **********************************************************************************************************************/ + +void BOARD_InitPeripherals_cm33_core0(void); + +/*********************************************************************************************************************** + * BOARD_InitBootPeripherals function + **********************************************************************************************************************/ +void BOARD_InitBootPeripherals(void); + +#if defined(__cplusplus) +} +#endif + +#endif /* _PERIPHERALS_H_ */ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board/pin_mux.c b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/pin_mux.c new file mode 100644 index 000000000..979e7d065 --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/pin_mux.c @@ -0,0 +1,860 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v17.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S69 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_gpio.h" +#include "fsl_iocon.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitDEBUG_UARTPins(); + BOARD_InitUSBPins(); + BOARD_InitLEDsPins(); + BOARD_InitBUTTONsPins(); + BOARD_InitPins_Core0(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive, + slew_rate: standard, invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitDEBUG_UARTPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t DEBUG_UART_RX = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, DEBUG_UART_RX); + + const uint32_t DEBUG_UART_TX = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, DEBUG_UART_TX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSWD_DEBUGPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '13', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9, mode: pullDown, + slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '12', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '21', peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, identifier: DEBUG_SWD_SWO, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSWD_DEBUGPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitSWD_DEBUGPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t DEBUG_SWD_SWO = (/* Pin is configured as SWO */ + IOCON_PIO_FUNC6 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is open (disabled) */ + IOCON_PIO_ASW_DI); + /* PORT0 PIN10 (coords: 21) is configured as SWO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN, DEBUG_SWD_SWO); + + if (Chip_GetVersion()==1) + { + const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */ + IOCON_PIO_FUNC6 | + /* Selects pull-down function */ + IOCON_PIO_MODE_PULLDOWN | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN11 (coords: 13) is configured as SWCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK); + } + else + { + const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */ + IOCON_PIO_FUNC6 | + /* Selects pull-down function */ + IOCON_PIO_MODE_PULLDOWN | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled), only for A0 version */ + IOCON_PIO_ASW_DIS_EN); + /* PORT0 PIN11 (coords: 13) is configured as SWCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK); + } + + if (Chip_GetVersion()==1) + { + const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */ + IOCON_PIO_FUNC6 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN12 (coords: 12) is configured as SWDIO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO); + } + else + { + const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */ + IOCON_PIO_FUNC6 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled), only for A0 version */ + IOCON_PIO_ASW_DIS_EN); + /* PORT0 PIN12 (coords: 12) is configured as SWDIO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO); + } +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSBPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '97', peripheral: USBFSH, signal: USB_DP, pin_signal: USB0_DP} + - {pin_num: '98', peripheral: USBFSH, signal: USB_DM, pin_signal: USB0_DM} + - {pin_num: '78', peripheral: USBFSH, signal: USB_VBUS, pin_signal: PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '35', peripheral: USBHSH, signal: USB_DM, pin_signal: USB1_DM} + - {pin_num: '34', peripheral: USBHSH, signal: USB_DP, pin_signal: USB1_DP} + - {pin_num: '36', peripheral: USBHSH, signal: USB_VBUS, pin_signal: USB1_VBUS} + - {pin_num: '65', peripheral: USBHSH, signal: USB_OVERCURRENTN, pin_signal: PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1, mode: pullUp} + - {pin_num: '66', peripheral: USBFSH, signal: USB_OVERCURRENTN, pin_signal: PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28, + mode: pullUp} + - {pin_num: '67', peripheral: USBFSH, signal: USB_PORTPWRN, pin_signal: PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2, mode: pullUp} + - {pin_num: '80', peripheral: USBHSH, signal: USB_PORTPWRN, pin_signal: PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2, mode: pullUp} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSBPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitUSBPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t USB0_VBUS = (/* Pin is configured as USB0_VBUS */ + IOCON_PIO_FUNC7 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN22 (coords: 78) is configured as USB0_VBUS */ + IOCON_PinMuxSet(IOCON, BOARD_INITUSBPINS_USB0_VBUS_PORT, BOARD_INITUSBPINS_USB0_VBUS_PIN, USB0_VBUS); + + IOCON->PIO[0][28] = ((IOCON->PIO[0][28] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT028 (pin 66) is configured as USB0_OVERCURRENTN. */ + | IOCON_PIO_FUNC(PIO0_28_FUNC_ALT7) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO0_28_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO0_28_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][12] = ((IOCON->PIO[1][12] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT112 (pin 67) is configured as USB0_PORTPWRN. */ + | IOCON_PIO_FUNC(PIO1_12_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_12_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_12_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][29] = ((IOCON->PIO[1][29] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT129 (pin 80) is configured as USB1_PORTPWRN. */ + | IOCON_PIO_FUNC(PIO1_29_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_29_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_29_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][30] = ((IOCON->PIO[1][30] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT130 (pin 65) is configured as USB1_OVERCURRENTN. */ + | IOCON_PIO_FUNC(PIO1_30_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_30_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_30_DIGIMODE_DIGITAL)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLEDsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '1', peripheral: GPIO, signal: 'PIO1, 4', pin_signal: PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A, direction: OUTPUT, gpio_init_state: 'true', + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '5', peripheral: GPIO, signal: 'PIO1, 6', pin_signal: PIO1_6/FC0_TXD_SCL_MISO_WS/SD0_D3/CTIMER2_MAT1/SCT_GPI3, direction: OUTPUT, gpio_init_state: 'true', + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '9', peripheral: GPIO, signal: 'PIO1, 7', pin_signal: PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4, direction: OUTPUT, gpio_init_state: 'true', + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLEDsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitLEDsPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO1 module */ + CLOCK_EnableClock(kCLOCK_Gpio1); + + gpio_pin_config_t LED_BLUE_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO1_4 (pin 1) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config); + + gpio_pin_config_t LED_RED_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO1_6 (pin 5) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config); + + gpio_pin_config_t LED_GREEN_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO1_7 (pin 9) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config); + + const uint32_t LED_BLUE = (/* Pin is configured as PIO1_4 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN4 (coords: 1) is configured as PIO1_4 */ + IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, LED_BLUE); + + const uint32_t LED_RED = (/* Pin is configured as PIO1_6 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN6 (coords: 5) is configured as PIO1_6 */ + IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, LED_RED); + + const uint32_t LED_GREEN = (/* Pin is configured as PIO1_7 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN7 (coords: 9) is configured as PIO1_7 */ + IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, LED_GREEN); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitBUTTONsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '88', peripheral: GPIO, signal: 'PIO0, 5', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, direction: INPUT, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '64', peripheral: GPIO, signal: 'PIO1, 18', pin_signal: PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0, direction: INPUT, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '10', peripheral: GPIO, signal: 'PIO1, 9', pin_signal: PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12, direction: INPUT, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '32', peripheral: SYSCON, signal: RESET, pin_signal: RESETN} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBUTTONsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitBUTTONsPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO0 module */ + CLOCK_EnableClock(kCLOCK_Gpio0); + + /* Enables the clock for the GPIO1 module */ + CLOCK_EnableClock(kCLOCK_Gpio1); + + gpio_pin_config_t S1_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO0_5 (pin 88) */ + GPIO_PinInit(BOARD_INITBUTTONSPINS_S1_GPIO, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, &S1_config); + + gpio_pin_config_t S3_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO1_9 (pin 10) */ + GPIO_PinInit(BOARD_INITBUTTONSPINS_S3_GPIO, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, &S3_config); + + gpio_pin_config_t S2_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO1_18 (pin 64) */ + GPIO_PinInit(BOARD_INITBUTTONSPINS_S2_GPIO, BOARD_INITBUTTONSPINS_S2_PORT, BOARD_INITBUTTONSPINS_S2_PIN, &S2_config); + + const uint32_t S1 = (/* Pin is configured as PIO0_5 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN5 (coords: 88) is configured as PIO0_5 */ + IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, S1); + + const uint32_t S2 = (/* Pin is configured as PIO1_18 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN18 (coords: 64) is configured as PIO1_18 */ + IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S2_PORT, BOARD_INITBUTTONSPINS_S2_PIN, S2); + + if (Chip_GetVersion()==1) + { + const uint32_t S3 = (/* Pin is configured as PIO1_9 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT1 PIN9 (coords: 10) is configured as PIO1_9 */ + IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, S3); + } + else + { + const uint32_t S3 = (/* Pin is configured as PIO1_9 */ + IOCON_PIO_FUNC0 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled), only for A0 version */ + IOCON_PIO_ASW_DIS_EN); + /* PORT1 PIN9 (coords: 10) is configured as PIO1_9 */ + IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, S3); + } +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins_Core0: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: [] + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins_Core0 + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitPins_Core0(void) +{ +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitI2SPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp, + slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, mode: inactive, slew_rate: standard, invert: disabled, + open_drain: disabled} + - {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '21', peripheral: FLEXCOMM6, signal: SCK, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, + identifier: FC6_I2S_CLK, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '87', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitI2SPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitI2SPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t FC6_I2S_CLK = (/* Pin is configured as FC6_SCK */ + IOCON_PIO_FUNC1 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN10 (coords: 21) is configured as FC6_SCK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_CLK_PORT, BOARD_INITI2SPINS_FC6_I2S_CLK_PIN, FC6_I2S_CLK); + + const uint32_t FC7_I2S_WS = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_WS_PORT, BOARD_INITI2SPINS_FC7_I2S_WS_PIN, FC7_I2S_WS); + + const uint32_t FC7_I2S_TX = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_TX_PORT, BOARD_INITI2SPINS_FC7_I2S_TX_PIN, FC7_I2S_TX); + + const uint32_t FC7_I2S_SCK = (/* Pin is configured as FC7_SCK */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_SCK_PORT, BOARD_INITI2SPINS_FC7_I2S_SCK_PIN, FC7_I2S_SCK); + + const uint32_t FC6_I2S_RX = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC2 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_RX_PORT, BOARD_INITI2SPINS_FC6_I2S_RX_PIN, FC6_I2S_RX); + + const uint32_t FC6_I2S_WS = (/* Pin is configured as FC6_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC2 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN16 (coords: 87) is configured as FC6_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_WS_PORT, BOARD_INITI2SPINS_FC6_I2S_WS_PIN, FC6_I2S_WS); + + const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SCL_PORT, BOARD_INITI2SPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL); + + const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SDA_PORT, BOARD_INITI2SPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA); + + const uint32_t MCLK = (/* Pin is configured as MCLK */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN31 (coords: 91) is configured as MCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_MCLK_PORT, BOARD_INITI2SPINS_MCLK_PIN, MCLK); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitACCELPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp, + slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '58', peripheral: GPIO, signal: 'PIO1, 19', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF, direction: INPUT, mode: inactive, + slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitACCELPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitACCELPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO1 module */ + CLOCK_EnableClock(kCLOCK_Gpio1); + + gpio_pin_config_t ACCL_INTR_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO1_19 (pin 58) */ + GPIO_PinInit(BOARD_INITACCELPINS_ACCL_INTR_GPIO, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, &ACCL_INTR_config); + + const uint32_t ACCL_INTR = (/* Pin is configured as PIO1_19 */ + IOCON_PIO_FUNC0 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is open (disabled) */ + IOCON_PIO_ASW_DI); + /* PORT1 PIN19 (coords: 58) is configured as PIO1_19 */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, ACCL_INTR); + + const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SCL_PORT, BOARD_INITACCELPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL); + + const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SDA_PORT, BOARD_INITACCELPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board/pin_mux.h b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/pin_mux.h new file mode 100644 index 000000000..3925c937a --- /dev/null +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board/pin_mux.h @@ -0,0 +1,435 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_29 (number 92), P8[2]/U6[13]/FC0_USART_RXD + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 29U +/*! + * @brief PORT pin mask */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 29U) +/* @} */ + +/*! @name PIO0_30 (number 94), P8[3]/U6[12]/FC0_USART_TXD + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 30U +/*! + * @brief PORT pin mask */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 30U) +/* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */ +#define IOCON_PIO_ASW_DIS_EN 0x00u /*!<@brief Analog switch is closed (enabled), only for A0 version */ +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC6 0x06u /*!<@brief Selects pin function 6 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLDOWN 0x10u /*!<@brief Selects pull-down function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_11 (number 13), U14[4]/SWDCLK_TRGT + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 11U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 11U) +/* @} */ + +/*! @name PIO0_12 (number 12), U15[4]/D7/P7[2]/IF_SWDIO + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 12U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 12U) +/* @} */ + +/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN 10U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN_MASK (1U << 10U) +/* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Enables digital function */ +#define IOCON_PIO_DIGITAL_EN 0x0100u +/*! + * @brief Selects pin function 7 */ +#define IOCON_PIO_FUNC7 0x07u +/*! + * @brief Input function is not inverted */ +#define IOCON_PIO_INV_DI 0x00u +/*! + * @brief No addition pin function */ +#define IOCON_PIO_MODE_INACT 0x00u +/*! + * @brief Open drain is disabled */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u +/*! + * @brief Standard mode, output slew rate control is enabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO0_28_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 7. */ +#define PIO0_28_FUNC_ALT7 0x07u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO0_28_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_12_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_12_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_12_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_29_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_29_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_29_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_30_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_30_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_30_MODE_PULL_UP 0x02u + +/*! @name PIO0_22 (number 78), P10[1]/USB0_VBUS + @{ */ +#define BOARD_INITUSBPINS_USB0_VBUS_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITUSBPINS_USB0_VBUS_PIN 22U /*!<@brief PORT pin number */ +#define BOARD_INITUSBPINS_USB0_VBUS_PIN_MASK (1U << 22U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSBPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_4 (number 1), R78/P18[5]/LEDR/PWM_ARD + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN_MASK (1U << 4U) /*!<@brief GPIO pin mask */ +#define BOARD_INITLEDSPINS_LED_BLUE_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN 4U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN_MASK (1U << 4U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_6 (number 5), R80/P18[9]/LEDB/PWM_ARD + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN_MASK (1U << 6U) /*!<@brief GPIO pin mask */ +#define BOARD_INITLEDSPINS_LED_RED_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_PIN 6U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_RED_PIN_MASK (1U << 6U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_7 (number 9), R79/P18[7]/LEDG/PWM_ARD + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN_MASK (1U << 7U) /*!<@brief GPIO pin mask */ +#define BOARD_INITLEDSPINS_LED_GREEN_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN 7U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN_MASK (1U << 7U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLEDsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_DIS_EN 0x00u /*!<@brief Analog switch is closed (enabled), only for A0 version */ +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_5 (number 88), S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1 + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_S1_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S1_GPIO_PIN_MASK (1U << 5U) /*!<@brief GPIO pin mask */ +#define BOARD_INITBUTTONSPINS_S1_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S1_PIN 5U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_S1_PIN_MASK (1U << 5U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_18 (number 64), S2/P18[16]/P24[2]/WAKE/GPIO + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_S2_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S2_GPIO_PIN_MASK (1U << 18U) /*!<@brief GPIO pin mask */ +#define BOARD_INITBUTTONSPINS_S2_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S2_PIN 18U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_S2_PIN_MASK (1U << 18U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_9 (number 10), S3/P18[1]/PIO1_9_GPIO_ARD + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_S3_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S3_GPIO_PIN_MASK (1U << 9U) /*!<@brief GPIO pin mask */ +#define BOARD_INITBUTTONSPINS_S3_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_S3_PIN 9U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_S3_PIN_MASK (1U << 9U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitBUTTONsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins_Core0(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_FUNC2 0x02u /*!<@brief Selects pin function 2 */ +#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */ +#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD + @{ */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD + @{ */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_31 (number 91), P19[7]/P19[8]/PLU_IN0/GPIO + @{ */ +#define BOARD_INITI2SPINS_MCLK_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_MCLK_PIN 31U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_MCLK_PIN_MASK (1U << 31U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_21 (number 76), P17[14]/FC7_I2S_SCK + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_20 (number 74), P17[10]/FC7_I2S_TX + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_19 (number 90), P17[12]/FC7_I2S_WS + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN 19U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN 10U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN_MASK (1U << 10U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_13 (number 2), P17[20]/FC6_I2S_RX + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN 13U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_16 (number 87), P18[17]/SD1_PWR_EN + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN 16U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN_MASK (1U << 16U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitI2SPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */ +#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD + @{ */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD + @{ */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_19 (number 58), U7[3]/P18[14]/PLU_OUT1/GPIO + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITACCELPINS_ACCL_INTR_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITACCELPINS_ACCL_INTR_GPIO_PIN_MASK (1U << 19U) /*!<@brief GPIO pin mask */ +#define BOARD_INITACCELPINS_ACCL_INTR_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_ACCL_INTR_PIN 19U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_ACCL_INTR_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitACCELPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/lpc55/boards/mcu_link/board.cmake b/hw/bsp/lpc55/boards/mcu_link/board.cmake index fd7cb6de6..bbaaf6648 100644 --- a/hw/bsp/lpc55/boards/mcu_link/board.cmake +++ b/hw/bsp/lpc55/boards/mcu_link/board.cmake @@ -7,8 +7,6 @@ set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC - CPU_LPC55S69JBD100_cm33_core0 - # port 1 is highspeed - # BOARD_TUD_RHPORT=1 + CPU_LPC55S69JBD64_cm33_core0 ) endfunction() diff --git a/hw/bsp/lpc55/boards/mcu_link/board.h b/hw/bsp/lpc55/boards/mcu_link/board.h index 1d71b3e79..d3c133f40 100644 --- a/hw/bsp/lpc55/boards/mcu_link/board.h +++ b/hw/bsp/lpc55/boards/mcu_link/board.h @@ -37,19 +37,17 @@ #endif // LED -#define LED_PORT 0 -#define LED_PIN 5 +#define LED_PORT BOARD_INITLEDSPINS_LED_PORT +#define LED_PIN BOARD_INITLEDSPINS_LED_PIN #define LED_STATE_ON 0 // WAKE button (Dummy, use unused pin -#define BUTTON_PORT 0 -#define BUTTON_PIN 30 +#define BUTTON_PORT BOARD_INITBUTTONSPINS_BUTTON_PORT +#define BUTTON_PIN BOARD_INITBUTTONSPINS_BUTTON_PIN #define BUTTON_STATE_ACTIVE 0 // UART #define UART_DEV USART0 -#define UART_RX_PINMUX 0, 24, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0, 25, IOCON_PIO_DIG_FUNC1_EN // XTAL #define XTAL0_CLK_HZ (16 * 1000 * 1000U) diff --git a/hw/bsp/lpc55/boards/mcu_link/board.mk b/hw/bsp/lpc55/boards/mcu_link/board.mk index ceb1d0ebc..4f686a88f 100644 --- a/hw/bsp/lpc55/boards/mcu_link/board.mk +++ b/hw/bsp/lpc55/boards/mcu_link/board.mk @@ -1,9 +1,16 @@ MCU_VARIANT = LPC55S69 MCU_CORE = LPC55S69_cm33_core0 -PORT ?= 1 +RHPORT_DEVICE ?= 1 CFLAGS += -DCPU_LPC55S69JBD64_cm33_core0 +SRC_C += \ + $(TOP)/$(BOARD_PATH)/board/clock_config.c \ + $(TOP)/$(BOARD_PATH)/board/pin_mux.c \ + $(TOP)/$(BOARD_PATH)/board/peripherals.c + +INC += $(TOP)/$(BOARD_PATH)/board + JLINK_DEVICE = LPC55S69 PYOCD_TARGET = LPC55S69 diff --git a/hw/bsp/lpc55/boards/mcu_link/board/clock_config.c b/hw/bsp/lpc55/boards/mcu_link/board/clock_config.c new file mode 100644 index 000000000..99a738f18 --- /dev/null +++ b/hw/bsp/lpc55/boards/mcu_link/board/clock_config.c @@ -0,0 +1,328 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to set up clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v18.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S69 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_power.h" +#include "fsl_clock.h" +#include "clock_config.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockPLL150M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: System_clock.outFreq, value: 12 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF96M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFROHF96M +outputs: +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable} +- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk} +sources: +- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +void BOARD_BootClockFROHF96M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */ + + POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL100M +outputs: +- {id: System_clock.outFreq, value: 100 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +void BOARD_BootClockPLL100M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + + POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U), + .pllndec = SYSCON_PLL0NDEC_NDIV(4U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(2U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 100000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL150M +called_from_default_init: true +outputs: +- {id: FXCOM0_clock.outFreq, value: 48 MHz} +- {id: System_clock.outFreq, value: 144 MHz} +- {id: USB0_clock.outFreq, value: 48 MHz} +- {id: USB1_PHY_clock.outFreq, value: 16 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: PLL1_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_PLL_USB_OUT, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.FCCLKSEL0.sel, value: SYSCON.PLL0DIV} +- {id: SYSCON.FRGCTRL0_DIV.scale, value: '400'} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL1_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0DIV.scale, value: '2'} +- {id: SYSCON.PLL0M_MULT.scale, value: '150', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '8', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '2', locked: true} +- {id: SYSCON.PLL1CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL1M_MULT.scale, value: '18'} +- {id: SYSCON.PLL1_PDEC.scale, value: '2'} +- {id: SYSCON.USB0CLKDIV.scale, value: '3'} +- {id: SYSCON.USB0CLKSEL.sel, value: SYSCON.MAINCLKSELB} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +void BOARD_BootClockPLL150M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_PLL_USB_OUT_MASK; /* Enable clk_in to HS USB */ + + POWER_SetVoltageForFreq(144000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(144000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(31U), + .pllndec = SYSCON_PLL0NDEC_NDIV(8U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(1U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(150U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 150000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up PLL1 */ + CLOCK_AttachClk(kEXT_CLK_to_PLL1); /*!< Switch PLL1CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL1); /* Ensure PLL is on */ + const pll_setup_t pll1Setup = { + .pllctrl = SYSCON_PLL1CTRL_CLKEN_MASK | SYSCON_PLL1CTRL_SELI(11U) | SYSCON_PLL1CTRL_SELP(5U), + .pllndec = SYSCON_PLL1NDEC_NDIV(1U), + .pllpdec = SYSCON_PLL1PDEC_PDIV(1U), + .pllmdec = SYSCON_PLL1MDEC_MDIV(18U), + .pllRate = 144000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */ + + /*!< Set up dividers */ + #if FSL_CLOCK_DRIVER_VERSION >= MAKE_VERSION(2, 3, 4) + CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 144U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */ + #else + CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 37120U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */ + #endif + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 0U, true); /*!< Reset USB0CLKDIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 3U, false); /*!< Set USB0CLKDIV divider to value 3 */ + CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 0U, true); /*!< Reset PLL0DIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 2U, false); /*!< Set PLL0DIV divider to value 2 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */ + CLOCK_AttachClk(kMAIN_CLK_to_USB0_CLK); /*!< Switch USB0_CLK to MAIN_CLK */ + CLOCK_AttachClk(kPLL0_DIV_to_FLEXCOMM0); /*!< Switch FLEXCOMM0 to PLL0_DIV */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK; +#endif +} diff --git a/hw/bsp/lpc55/boards/mcu_link/board/clock_config.h b/hw/bsp/lpc55/boards/mcu_link/board/clock_config.h new file mode 100644 index 000000000..9112ede78 --- /dev/null +++ b/hw/bsp/lpc55/boards/mcu_link/board/clock_config.h @@ -0,0 +1,290 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal frequency in Hz */ +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO12M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKFRO12M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKFRO12M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKFRO12M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFRO12M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKFRO12M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFRO12M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKFRO12M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKFRO12M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKFRO12M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO12M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF96M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFROHF96M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFROHF96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKFROHF96M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKFROHF96M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKFROHF96M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKFROHF96M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFROHF96M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKFROHF96M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKFROHF96M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKFROHF96M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKFROHF96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKFROHF96M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFROHF96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKFROHF96M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKFROHF96M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFROHF96M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFROHF96M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKPLL100M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKPLL100M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKPLL100M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKPLL100M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKPLL100M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKPLL100M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL100M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKPLL100M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL100M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKPLL100M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKPLL100M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL100M_SYSTEM_CLOCK 100000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKPLL100M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKPLL100M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKPLL100M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL100M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKPLL100M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL100M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK 144000000U /*!< Core clock frequency: 144000000Hz */ + + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKPLL150M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */ +#define BOARD_BOOTCLOCKPLL150M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */ +#define BOARD_BOOTCLOCKPLL150M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM0_CLOCK 48000000UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */ +#define BOARD_BOOTCLOCKPLL150M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */ +#define BOARD_BOOTCLOCKPLL150M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */ +#define BOARD_BOOTCLOCKPLL150M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL150M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */ +#define BOARD_BOOTCLOCKPLL150M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */ +#define BOARD_BOOTCLOCKPLL150M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */ +#define BOARD_BOOTCLOCKPLL150M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */ +#define BOARD_BOOTCLOCKPLL150M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */ +#define BOARD_BOOTCLOCKPLL150M_SYSTEM_CLOCK 144000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */ +#define BOARD_BOOTCLOCKPLL150M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKPLL150M_USB0_CLOCK 48000000UL /* Clock consumers of USB0_clock output : USB0, USBFSH */ +#define BOARD_BOOTCLOCKPLL150M_USB1_PHY_CLOCK 16000000UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */ +#define BOARD_BOOTCLOCKPLL150M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKPLL150M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */ + +/******************************************************************************* + * API for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL150M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/lpc55/boards/mcu_link/board/peripherals.c b/hw/bsp/lpc55/boards/mcu_link/board/peripherals.c new file mode 100644 index 000000000..890a20fc6 --- /dev/null +++ b/hw/bsp/lpc55/boards/mcu_link/board/peripherals.c @@ -0,0 +1,160 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Peripherals v15.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S69 +functionalGroups: +- name: BOARD_InitPeripherals_cm33_core0 + UUID: 61d0725d-b300-49cb-9c66-b5edfbf8ffc1 + called_from_default_init: true + selectedCore: cm33_core0 +- name: BOARD_InitPeripherals_cm33_core1 + UUID: e2041cd4-ebb6-45a5-807f-e0c2dc047d48 + selectedCore: cm33_core1 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'system' +- type_id: 'system' +- global_system_definitions: + - user_definitions: '' + - user_includes: '' + - global_init: '' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'uart_cmsis_common' +- type_id: 'uart_cmsis_common' +- global_USART_CMSIS_common: + - quick_selection: 'default' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +component: +- type: 'gpio_adapter_common' +- type_id: 'gpio_adapter_common' +- global_gpio_adapter_common: + - quick_selection: 'default' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/*********************************************************************************************************************** + * Included files + **********************************************************************************************************************/ +#include "peripherals.h" + +/*********************************************************************************************************************** + * BOARD_InitPeripherals_cm33_core0 functional group + **********************************************************************************************************************/ +/*********************************************************************************************************************** + * DEBUG_UART initialization code + **********************************************************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +instance: +- name: 'DEBUG_UART' +- type: 'flexcomm_usart' +- mode: 'polling' +- custom_name_enabled: 'true' +- type_id: 'flexcomm_usart_2.2.0' +- functional_group: 'BOARD_InitPeripherals_cm33_core0' +- peripheral: 'FLEXCOMM0' +- config_sets: + - usartConfig_t: + - usartConfig: + - clockSource: 'FXCOMFunctionClock' + - clockSourceFreq: 'ClocksTool_DefaultInit' + - baudRate_Bps: '115200' + - syncMode: 'kUSART_SyncModeDisabled' + - parityMode: 'kUSART_ParityDisabled' + - stopBitCount: 'kUSART_OneStopBit' + - bitCountPerChar: 'kUSART_8BitsPerChar' + - loopback: 'false' + - txWatermark: 'kUSART_TxFifo0' + - rxWatermark: 'kUSART_RxFifo1' + - enableRx: 'true' + - enableTx: 'true' + - clockPolarity: 'kUSART_RxSampleOnFallingEdge' + - enableContinuousSCLK: 'false' + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ +const usart_config_t DEBUG_UART_config = { + .baudRate_Bps = 115200UL, + .syncMode = kUSART_SyncModeDisabled, + .parityMode = kUSART_ParityDisabled, + .stopBitCount = kUSART_OneStopBit, + .bitCountPerChar = kUSART_8BitsPerChar, + .loopback = false, + .txWatermark = kUSART_TxFifo0, + .rxWatermark = kUSART_RxFifo1, + .enableRx = true, + .enableTx = true, + .enableMode32k = false, + .clockPolarity = kUSART_RxSampleOnFallingEdge, + .enableContinuousSCLK = false +}; + +static void DEBUG_UART_init(void) { + /* Reset FLEXCOMM device */ + RESET_PeripheralReset(kFC0_RST_SHIFT_RSTn); + USART_Init(DEBUG_UART_PERIPHERAL, &DEBUG_UART_config, DEBUG_UART_CLOCK_SOURCE); +} + +/*********************************************************************************************************************** + * NVIC initialization code + **********************************************************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +instance: +- name: 'NVIC' +- type: 'nvic' +- mode: 'general' +- custom_name_enabled: 'false' +- type_id: 'nvic' +- functional_group: 'BOARD_InitPeripherals_cm33_core0' +- peripheral: 'NVIC' +- config_sets: + - nvic: + - interrupt_table: [] + - interrupts: [] + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/* Empty initialization function (commented out) +static void NVIC_init(void) { +} */ + +/*********************************************************************************************************************** + * Initialization functions + **********************************************************************************************************************/ +void BOARD_InitPeripherals_cm33_core0(void) +{ + /* Initialize components */ + DEBUG_UART_init(); +} + +/*********************************************************************************************************************** + * BOARD_InitBootPeripherals function + **********************************************************************************************************************/ +void BOARD_InitBootPeripherals(void) +{ + BOARD_InitPeripherals_cm33_core0(); +} diff --git a/hw/bsp/lpc55/boards/mcu_link/board/peripherals.h b/hw/bsp/lpc55/boards/mcu_link/board/peripherals.h new file mode 100644 index 000000000..fc4d72c33 --- /dev/null +++ b/hw/bsp/lpc55/boards/mcu_link/board/peripherals.h @@ -0,0 +1,57 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PERIPHERALS_H_ +#define _PERIPHERALS_H_ + +/*********************************************************************************************************************** + * Included files + **********************************************************************************************************************/ +#include "fsl_common.h" +#include "fsl_reset.h" +#include "fsl_usart.h" +#include "fsl_clock.h" + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + +/*********************************************************************************************************************** + * Definitions + **********************************************************************************************************************/ +/* Definitions for BOARD_InitPeripherals_cm33_core0 functional group */ +/* Definition of peripheral ID */ +#define DEBUG_UART_PERIPHERAL ((USART_Type *)FLEXCOMM0) +/* Definition of the clock source frequency */ +#define DEBUG_UART_CLOCK_SOURCE 48000000UL + +/*********************************************************************************************************************** + * Global variables + **********************************************************************************************************************/ +extern const usart_config_t DEBUG_UART_config; + +/*********************************************************************************************************************** + * Initialization functions + **********************************************************************************************************************/ + +void BOARD_InitPeripherals_cm33_core0(void); + +/*********************************************************************************************************************** + * BOARD_InitBootPeripherals function + **********************************************************************************************************************/ +void BOARD_InitBootPeripherals(void); + +#if defined(__cplusplus) +} +#endif + +#endif /* _PERIPHERALS_H_ */ diff --git a/hw/bsp/lpc55/boards/mcu_link/board/pin_mux.c b/hw/bsp/lpc55/boards/mcu_link/board/pin_mux.c new file mode 100644 index 000000000..a673302e5 --- /dev/null +++ b/hw/bsp/lpc55/boards/mcu_link/board/pin_mux.c @@ -0,0 +1,839 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v17.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: LPCXpresso55S69 +expansion_headers: +- id: lpc_style_arduino + name: LPCXpresso V3 (Arduino compatible) + connectors: + - id: C1 + name: P16 + pins: + - {id: 8, name: 3.3V, external_signal_types: power_supply_3.3V} + - {id: 10, name: RESET, pin_num: '32', pin_signal: RESETN} + - {id: 12, name: 3.3V, external_signal_types: power_supply_3.3V} + - {id: 14, name: 5V, external_signal_types: power_supply_5V} + - {id: 16, name: GND, external_signal_types: ground} + - {id: 18, name: GND, external_signal_types: ground} + - {id: 20, name: 5V, external_signal_types: power_supply_5V} + - id: C2 + name: P17 + pins: + - {id: 1, name: D15, pin_num: '4', pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2} + - {id: 3, name: D14, pin_num: '30', pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3} + - {id: 5, name: 3.3V, external_signal_types: power_supply_3.3V} + - {id: 6, pin_num: '93', pin_signal: PIO1_11/FC1_TXD_SCL_MISO_WS/CT_INP5/USB0_VBUS} + - {id: 7, name: GND, external_signal_types: ground} + - {id: 8, pin_num: '88', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5} + - {id: 9, name: D13, pin_num: '61', pin_signal: PIO1_2/CTIMER0_MAT3/SCT_GPI6/HS_SPI_SCK/USB1_PORTPWRN/PLU_OUT5} + - {id: 10, pin_num: '74', pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS} + - {id: 11, name: D12, pin_num: '62', pin_signal: PIO1_3/SCT0_OUT4/HS_SPI_MISO/USB0_PORTPWRN/PLU_OUT6} + - {id: 12, pin_num: '90', pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19} + - {id: 13, name: D11, pin_num: '60', pin_signal: PIO0_26/FC2_RXD_SDA_MOSI_DATA/CLKOUT/CT_INP14/SCT0_OUT5/USB0_IDVALUE/FC0_SCK/HS_SPI_MOSI/SECURE_GPIO0_26} + - {id: 14, pin_num: '76', pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21} + - {id: 15, name: D10, pin_num: '59', pin_signal: PIO1_1/FC3_RXD_SDA_MOSI_DATA/CT_INP3/SCT_GPI5/HS_SPI_SSEL1/USB1_OVERCURRENTN/PLU_OUT4} + - {id: 16, pin_num: '85', pin_signal: PIO1_27/FC2_RTS_SCL_SSEL1/SD0_D4/CTIMER0_MAT3/CLKOUT/PLU_IN4} + - {id: 17, name: D9, pin_num: '31', pin_signal: PIO1_5/FC0_RXD_SDA_MOSI_DATA/SD0_D2/CTIMER2_MAT0/SCT_GPI0} + - {id: 18, pin_num: '73', pin_signal: PIO1_28/FC7_SCK/SD0_D5/CT_INP2/PLU_IN3} + - {id: 19, name: D8, pin_num: '24', pin_signal: PIO1_8/FC0_CTS_SDA_SSEL0/SD0_CLK/SCT0_OUT1/FC4_SSEL2/ADC0_4} + - {id: 20, pin_num: '2', pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N} + - id: C3 + name: P18 + pins: + - {id: 1, name: D7, pin_num: '10', pin_signal: PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12} + - {id: 2, pin_num: '7', pin_signal: PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1} + - {id: 3, name: D6, pin_num: '40', pin_signal: PIO1_10/FC1_RXD_SDA_MOSI_DATA/CTIMER1_MAT0/SCT0_OUT3} + - {id: 4, pin_num: '57', pin_signal: PIO1_14/UTICK_CAP2/CTIMER1_MAT2/FC5_CTS_SDA_SSEL0/USB0_LEDN/SD1_CMD/ACMP0_D} + - {id: 5, name: D5, pin_num: '1', pin_signal: PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A} + - {id: 6, pin_num: '77', pin_signal: PIO1_25/FC2_TXD_SCL_MISO_WS/SCT0_OUT2/SD1_D0/UTICK_CAP0/PLU_CLKIN} + - {id: 7, name: D4-LED_GREEN, pin_num: '9', pin_signal: PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4} + - {id: 8, pin_num: '42', pin_signal: PIO1_23/FC2_SCK/SCT0_OUT0/SD1_D3/FC3_SSEL2/PLU_OUT5} + - {id: 10, pin_num: '3', pin_signal: PIO1_24/FC2_RXD_SDA_MOSI_DATA/SCT0_OUT1/SD1_D1/FC3_SSEL3/PLU_OUT6} + - {id: 11, name: D2, pin_num: '22', pin_signal: PIO0_15/FC6_CTS_SDA_SSEL0/UTICK_CAP2/CT_INP16/SCT0_OUT2/SD0_WR_PRT/SECURE_GPIO0_15/ADC0_2} + - {id: 12, pin_num: '82', pin_signal: PIO1_15/UTICK_CAP3/CT_INP7/FC5_RTS_SCL_SSEL1/FC4_RTS_SCL_SSEL1/SD1_D2} + - {id: 13, name: D1, pin_num: '27', pin_signal: PIO0_27/FC2_TXD_SCL_MISO_WS/CTIMER3_MAT2/SCT0_OUT6/FC7_RXD_SDA_MOSI_DATA/PLU_OUT0/SECURE_GPIO0_27} + - {id: 14, pin_num: '58', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF} + - {id: 15, name: D0, pin_num: '3', pin_signal: PIO1_24/FC2_RXD_SDA_MOSI_DATA/SCT0_OUT1/SD1_D1/FC3_SSEL3/PLU_OUT6} + - {id: 16, pin_num: '64', pin_signal: PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0} + - {id: 17, pin_num: '87', pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD} + - {id: 18, pin_num: '68', pin_signal: PIO1_26/FC2_CTS_SDA_SSEL0/SCT0_OUT3/CT_INP3/UTICK_CAP1/HS_SPI_SSEL3/PLU_IN5} + - {id: 19, pin_num: '43', pin_signal: PIO1_17/FC6_RTS_SCL_SSEL1/SCT0_OUT4/SD1_CARD_INT_N/SD1_CARD_DET_N} + - {id: 20, pin_num: '56', pin_signal: PIO0_18/FC4_CTS_SDA_SSEL0/SD0_WR_PRT/CTIMER1_MAT0/SCT0_OUT1/PLU_IN3/SECURE_GPIO0_18/ACMP0_C} + - id: C4 + name: P19 + pins: + - {id: 2, name: A0, pin_num: '14', pin_signal: PIO0_16/FC4_TXD_SCL_MISO_WS/CLKOUT/CT_INP4/SECURE_GPIO0_16/ADC0_8} + - {id: 4, name: A1, pin_num: '20', pin_signal: PIO0_23/MCLK/CTIMER1_MAT2/CTIMER3_MAT3/SCT0_OUT4/FC0_CTS_SDA_SSEL0/SD1_D1/SECURE_GPIO0_23/ADC0_0} + - {id: 6, name: A2, pin_num: '54', pin_signal: PIO0_0/FC3_SCK/CTIMER0_MAT0/SCT_GPI0/SD1_CARD_INT_N/SECURE_GPIO0_0/ACMP0_A} + - {id: 7, pin_num: '91', pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0} + - {id: 8, name: A3, pin_num: '91', pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0} + - {id: 9, pin_num: '71', pin_signal: PIO0_13/FC1_CTS_SDA_SSEL0/UTICK_CAP0/CT_INP0/SCT_GPI0/FC1_RXD_SDA_MOSI_DATA/PLU_IN0/SECURE_GPIO0_13} + - {id: 10, name: A4, pin_num: '71', pin_signal: PIO0_13/FC1_CTS_SDA_SSEL0/UTICK_CAP0/CT_INP0/SCT_GPI0/FC1_RXD_SDA_MOSI_DATA/PLU_IN0/SECURE_GPIO0_13} + - {id: 11, pin_num: '72', pin_signal: PIO0_14/FC1_RTS_SCL_SSEL1/UTICK_CAP1/CT_INP1/SCT_GPI1/FC1_TXD_SCL_MISO_WS/PLU_IN1/SECURE_GPIO0_14} + - {id: 12, name: A5, pin_num: '72', pin_signal: PIO0_14/FC1_RTS_SCL_SSEL1/UTICK_CAP1/CT_INP1/SCT_GPI1/FC1_TXD_SCL_MISO_WS/PLU_IN1/SECURE_GPIO0_14} +pin_labels: +- {pin_num: '7', pin_signal: PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1, label: 'P18[2]/SD1_CLK', identifier: LED_RED} +- {pin_num: '88', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, label: 'S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1', + identifier: LED} +- {pin_num: '11', pin_signal: PIO1_0/FC0_RTS_SCL_SSEL1/SD0_D3/CT_INP2/SCT_GPI4/PLU_OUT3/ADC0_11, label: 'U20[2]/SD0_D3', identifier: BUTTON} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_gpio.h" +#include "fsl_iocon.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitDEBUG_UARTPins(); + BOARD_InitUSBPins(); + BOARD_InitLEDsPins(); + BOARD_InitBUTTONsPins(); + BOARD_InitPins_Core0(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive, + slew_rate: standard, invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitDEBUG_UARTPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t DEBUG_UART_RX = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, DEBUG_UART_RX); + + const uint32_t DEBUG_UART_TX = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, DEBUG_UART_TX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSWD_DEBUGPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '13', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9, mode: pullDown, + slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '12', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '21', peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, identifier: DEBUG_SWD_SWO, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSWD_DEBUGPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitSWD_DEBUGPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t DEBUG_SWD_SWO = (/* Pin is configured as SWO */ + IOCON_PIO_FUNC6 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is open (disabled) */ + IOCON_PIO_ASW_DI); + /* PORT0 PIN10 (coords: 21) is configured as SWO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN, DEBUG_SWD_SWO); + + if (Chip_GetVersion()==1) + { + const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */ + IOCON_PIO_FUNC6 | + /* Selects pull-down function */ + IOCON_PIO_MODE_PULLDOWN | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN11 (coords: 13) is configured as SWCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK); + } + else + { + const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */ + IOCON_PIO_FUNC6 | + /* Selects pull-down function */ + IOCON_PIO_MODE_PULLDOWN | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled), only for A0 version */ + IOCON_PIO_ASW_DIS_EN); + /* PORT0 PIN11 (coords: 13) is configured as SWCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK); + } + + if (Chip_GetVersion()==1) + { + const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */ + IOCON_PIO_FUNC6 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN12 (coords: 12) is configured as SWDIO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO); + } + else + { + const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */ + IOCON_PIO_FUNC6 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled), only for A0 version */ + IOCON_PIO_ASW_DIS_EN); + /* PORT0 PIN12 (coords: 12) is configured as SWDIO */ + IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO); + } +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitUSBPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '97', peripheral: USBFSH, signal: USB_DP, pin_signal: USB0_DP} + - {pin_num: '98', peripheral: USBFSH, signal: USB_DM, pin_signal: USB0_DM} + - {pin_num: '78', peripheral: USBFSH, signal: USB_VBUS, pin_signal: PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22, + mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '35', peripheral: USBHSH, signal: USB_DM, pin_signal: USB1_DM} + - {pin_num: '34', peripheral: USBHSH, signal: USB_DP, pin_signal: USB1_DP} + - {pin_num: '36', peripheral: USBHSH, signal: USB_VBUS, pin_signal: USB1_VBUS} + - {pin_num: '65', peripheral: USBHSH, signal: USB_OVERCURRENTN, pin_signal: PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1, mode: pullUp} + - {pin_num: '66', peripheral: USBFSH, signal: USB_OVERCURRENTN, pin_signal: PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28, + mode: pullUp} + - {pin_num: '67', peripheral: USBFSH, signal: USB_PORTPWRN, pin_signal: PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2, mode: pullUp} + - {pin_num: '80', peripheral: USBHSH, signal: USB_PORTPWRN, pin_signal: PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2, mode: pullUp} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitUSBPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitUSBPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t USB0_VBUS = (/* Pin is configured as USB0_VBUS */ + IOCON_PIO_FUNC7 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN22 (coords: 78) is configured as USB0_VBUS */ + IOCON_PinMuxSet(IOCON, BOARD_INITUSBPINS_USB0_VBUS_PORT, BOARD_INITUSBPINS_USB0_VBUS_PIN, USB0_VBUS); + + IOCON->PIO[0][28] = ((IOCON->PIO[0][28] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT028 (pin 66) is configured as USB0_OVERCURRENTN. */ + | IOCON_PIO_FUNC(PIO0_28_FUNC_ALT7) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO0_28_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO0_28_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][12] = ((IOCON->PIO[1][12] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT112 (pin 67) is configured as USB0_PORTPWRN. */ + | IOCON_PIO_FUNC(PIO1_12_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_12_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_12_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][29] = ((IOCON->PIO[1][29] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT129 (pin 80) is configured as USB1_PORTPWRN. */ + | IOCON_PIO_FUNC(PIO1_29_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_29_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_29_DIGIMODE_DIGITAL)); + + IOCON->PIO[1][30] = ((IOCON->PIO[1][30] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT130 (pin 65) is configured as USB1_OVERCURRENTN. */ + | IOCON_PIO_FUNC(PIO1_30_FUNC_ALT4) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_30_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_30_DIGIMODE_DIGITAL)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLEDsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '88', peripheral: GPIO, signal: 'PIO0, 5', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, direction: OUTPUT, + gpio_init_state: 'true', mode: pullUp} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLEDsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitLEDsPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO0 module */ + CLOCK_EnableClock(kCLOCK_Gpio0); + + gpio_pin_config_t LED_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO0_5 (pin 88) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_GPIO, BOARD_INITLEDSPINS_LED_PORT, BOARD_INITLEDSPINS_LED_PIN, &LED_config); + + IOCON->PIO[0][5] = ((IOCON->PIO[0][5] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT05 (pin 88) is configured as PIO0_5. */ + | IOCON_PIO_FUNC(PIO0_5_FUNC_ALT0) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO0_5_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO0_5_DIGIMODE_DIGITAL)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitBUTTONsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '32', peripheral: SYSCON, signal: RESET, pin_signal: RESETN} + - {pin_num: '11', peripheral: GPIO, signal: 'PIO1, 0', pin_signal: PIO1_0/FC0_RTS_SCL_SSEL1/SD0_D3/CT_INP2/SCT_GPI4/PLU_OUT3/ADC0_11, direction: INPUT, mode: pullUp} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBUTTONsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitBUTTONsPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO1 module */ + CLOCK_EnableClock(kCLOCK_Gpio1); + + gpio_pin_config_t BUTTON_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO1_0 (pin 11) */ + GPIO_PinInit(BOARD_INITBUTTONSPINS_BUTTON_GPIO, BOARD_INITBUTTONSPINS_BUTTON_PORT, BOARD_INITBUTTONSPINS_BUTTON_PIN, &BUTTON_config); + + if (Chip_GetVersion()==1) + { + IOCON->PIO[1][0] = ((IOCON->PIO[1][0] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT10 (pin 11) is configured as PIO1_0. */ + | IOCON_PIO_FUNC(PIO1_0_FUNC_ALT0) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_0_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_0_DIGIMODE_DIGITAL)); + } + else + { + IOCON->PIO[1][0] = ((IOCON->PIO[1][0] & + /* Mask bits to zero which are setting */ + (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK))) + + /* Selects pin function. + * : PORT10 (pin 11) is configured as PIO1_0. */ + | IOCON_PIO_FUNC(PIO1_0_FUNC_ALT0) + + /* Selects function mode (on-chip pull-up/pull-down resistor control). + * : Pull-up. + * Pull-up resistor enabled. */ + | IOCON_PIO_MODE(PIO1_0_MODE_PULL_UP) + + /* Select Digital mode. + * : Enable Digital mode. + * Digital input is enabled. */ + | IOCON_PIO_DIGIMODE(PIO1_0_DIGIMODE_DIGITAL)); + } +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins_Core0: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: [] + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins_Core0 + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitPins_Core0(void) +{ +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitI2SPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp, + slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, mode: inactive, slew_rate: standard, invert: disabled, + open_drain: disabled} + - {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '21', peripheral: FLEXCOMM6, signal: SCK, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, + identifier: FC6_I2S_CLK, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled} + - {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N, + mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '87', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitI2SPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitI2SPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + const uint32_t FC6_I2S_CLK = (/* Pin is configured as FC6_SCK */ + IOCON_PIO_FUNC1 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is closed (enabled) */ + IOCON_PIO_ASW_EN); + /* PORT0 PIN10 (coords: 21) is configured as FC6_SCK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_CLK_PORT, BOARD_INITI2SPINS_FC6_I2S_CLK_PIN, FC6_I2S_CLK); + + const uint32_t FC7_I2S_WS = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_WS_PORT, BOARD_INITI2SPINS_FC7_I2S_WS_PIN, FC7_I2S_WS); + + const uint32_t FC7_I2S_TX = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_TX_PORT, BOARD_INITI2SPINS_FC7_I2S_TX_PIN, FC7_I2S_TX); + + const uint32_t FC7_I2S_SCK = (/* Pin is configured as FC7_SCK */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_SCK_PORT, BOARD_INITI2SPINS_FC7_I2S_SCK_PIN, FC7_I2S_SCK); + + const uint32_t FC6_I2S_RX = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC2 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_RX_PORT, BOARD_INITI2SPINS_FC6_I2S_RX_PIN, FC6_I2S_RX); + + const uint32_t FC6_I2S_WS = (/* Pin is configured as FC6_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC2 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN16 (coords: 87) is configured as FC6_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_WS_PORT, BOARD_INITI2SPINS_FC6_I2S_WS_PIN, FC6_I2S_WS); + + const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SCL_PORT, BOARD_INITI2SPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL); + + const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SDA_PORT, BOARD_INITI2SPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA); + + const uint32_t MCLK = (/* Pin is configured as MCLK */ + IOCON_PIO_FUNC1 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN31 (coords: 91) is configured as MCLK */ + IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_MCLK_PORT, BOARD_INITI2SPINS_MCLK_PIN, MCLK); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitACCELPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp, + slew_rate: standard, invert: disabled, open_drain: disabled} + - {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard, + invert: disabled, open_drain: disabled} + - {pin_num: '58', peripheral: GPIO, signal: 'PIO1, 19', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF, direction: INPUT, mode: inactive, + slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitACCELPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 (Core #0) */ +void BOARD_InitACCELPins(void) +{ + /* Enables the clock for the I/O controller.: Enable Clock. */ + CLOCK_EnableClock(kCLOCK_Iocon); + + /* Enables the clock for the GPIO1 module */ + CLOCK_EnableClock(kCLOCK_Gpio1); + + gpio_pin_config_t ACCL_INTR_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO1_19 (pin 58) */ + GPIO_PinInit(BOARD_INITACCELPINS_ACCL_INTR_GPIO, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, &ACCL_INTR_config); + + const uint32_t ACCL_INTR = (/* Pin is configured as PIO1_19 */ + IOCON_PIO_FUNC0 | + /* No addition pin function */ + IOCON_PIO_MODE_INACT | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI | + /* Analog switch is open (disabled) */ + IOCON_PIO_ASW_DI); + /* PORT1 PIN19 (coords: 58) is configured as PIO1_19 */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, ACCL_INTR); + + const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SCL_PORT, BOARD_INITACCELPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL); + + const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PIO_FUNC5 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */ + IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SDA_PORT, BOARD_INITACCELPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/lpc55/boards/mcu_link/board/pin_mux.h b/hw/bsp/lpc55/boards/mcu_link/board/pin_mux.h new file mode 100644 index 000000000..3e14d6baf --- /dev/null +++ b/hw/bsp/lpc55/boards/mcu_link/board/pin_mux.h @@ -0,0 +1,393 @@ +/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_29 (number 92), P8[2]/U6[13]/FC0_USART_RXD + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 29U +/*! + * @brief PORT pin mask */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 29U) +/* @} */ + +/*! @name PIO0_30 (number 94), P8[3]/U6[12]/FC0_USART_TXD + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 30U +/*! + * @brief PORT pin mask */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 30U) +/* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */ +#define IOCON_PIO_ASW_DIS_EN 0x00u /*!<@brief Analog switch is closed (enabled), only for A0 version */ +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC6 0x06u /*!<@brief Selects pin function 6 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLDOWN 0x10u /*!<@brief Selects pull-down function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO0_11 (number 13), U14[4]/SWDCLK_TRGT + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 11U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 11U) +/* @} */ + +/*! @name PIO0_12 (number 12), U15[4]/D7/P7[2]/IF_SWDIO + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 12U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 12U) +/* @} */ + +/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT + @{ */ +/*! + * @brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT 0U +/*! + * @brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN 10U +/*! + * @brief PORT pin mask */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN_MASK (1U << 10U) +/* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Enables digital function */ +#define IOCON_PIO_DIGITAL_EN 0x0100u +/*! + * @brief Selects pin function 7 */ +#define IOCON_PIO_FUNC7 0x07u +/*! + * @brief Input function is not inverted */ +#define IOCON_PIO_INV_DI 0x00u +/*! + * @brief No addition pin function */ +#define IOCON_PIO_MODE_INACT 0x00u +/*! + * @brief Open drain is disabled */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u +/*! + * @brief Standard mode, output slew rate control is enabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO0_28_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 7. */ +#define PIO0_28_FUNC_ALT7 0x07u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO0_28_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_12_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_12_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_12_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_29_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_29_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_29_MODE_PULL_UP 0x02u +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_30_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 4. */ +#define PIO1_30_FUNC_ALT4 0x04u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_30_MODE_PULL_UP 0x02u + +/*! @name PIO0_22 (number 78), P10[1]/USB0_VBUS + @{ */ +#define BOARD_INITUSBPINS_USB0_VBUS_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITUSBPINS_USB0_VBUS_PIN 22U /*!<@brief PORT pin number */ +#define BOARD_INITUSBPINS_USB0_VBUS_PIN_MASK (1U << 22U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitUSBPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO0_5_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 0. */ +#define PIO0_5_FUNC_ALT0 0x00u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO0_5_MODE_PULL_UP 0x02u + +/*! @name PIO0_5 (number 88), S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1 + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_GPIO_PIN_MASK (1U << 5U) /*!<@brief GPIO pin mask */ +#define BOARD_INITLEDSPINS_LED_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_PIN 5U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_PIN_MASK (1U << 5U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLEDsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_0_DIGIMODE_DIGITAL 0x01u +/*! + * @brief Selects pin function.: Alternative connection 0. */ +#define PIO1_0_FUNC_ALT0 0x00u +/*! + * @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */ +#define PIO1_0_MODE_PULL_UP 0x02u + +/*! @name PIO1_0 (number 11), U20[2]/SD0_D3 + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_BUTTON_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_BUTTON_GPIO_PIN_MASK (1U << 0U) /*!<@brief GPIO pin mask */ +#define BOARD_INITBUTTONSPINS_BUTTON_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_BUTTON_PIN 0U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_BUTTON_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitBUTTONsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins_Core0(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_FUNC2 0x02u /*!<@brief Selects pin function 2 */ +#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */ +#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD + @{ */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD + @{ */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_31 (number 91), P19[7]/P19[8]/PLU_IN0/GPIO + @{ */ +#define BOARD_INITI2SPINS_MCLK_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_MCLK_PIN 31U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_MCLK_PIN_MASK (1U << 31U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_21 (number 76), P17[14]/FC7_I2S_SCK + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_20 (number 74), P17[10]/FC7_I2S_TX + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_19 (number 90), P17[12]/FC7_I2S_WS + @{ */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN 19U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN 10U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN_MASK (1U << 10U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_13 (number 2), P17[20]/FC6_I2S_RX + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN 13U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_16 (number 87), P18[17]/SD1_PWR_EN + @{ */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN 16U /*!<@brief PORT pin number */ +#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN_MASK (1U << 16U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitI2SPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */ +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */ +#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ + +/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD + @{ */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD + @{ */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_19 (number 58), U7[3]/P18[14]/PLU_OUT1/GPIO + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITACCELPINS_ACCL_INTR_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITACCELPINS_ACCL_INTR_GPIO_PIN_MASK (1U << 19U) /*!<@brief GPIO pin mask */ +#define BOARD_INITACCELPINS_ACCL_INTR_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITACCELPINS_ACCL_INTR_PIN 19U /*!<@brief PORT pin number */ +#define BOARD_INITACCELPINS_ACCL_INTR_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitACCELPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/lpc55/boards/mcu_link/mcu_link.mex b/hw/bsp/lpc55/boards/mcu_link/mcu_link.mex new file mode 100644 index 000000000..c78dba808 --- /dev/null +++ b/hw/bsp/lpc55/boards/mcu_link/mcu_link.mex @@ -0,0 +1,1354 @@ +<?xml version="1.0" encoding= "UTF-8" ?> +<configuration name="LPCXpresso55S69" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_19 http://mcuxpresso.nxp.com/XSD/mex_configuration_19.xsd" uuid="acf73d26-2bf9-4855-b3be-26068672d98a" version="19" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_19" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> + <common> + <processor>LPC55S69</processor> + <package>LPC55S69JBD100</package> + <board>LPCXpresso55S69</board> + <board_revision>A2</board_revision> + <mcu_data>ksdk2_0</mcu_data> + <cores selected="cm33_core0"> + <core name="Cortex-M33 (Core #0)" id="cm33_core0" description=""/> + <core name="Cortex-M33 (Core #1)" id="cm33_core1" description=""/> + </cores> + <description></description> + </common> + <preferences> + <validate_boot_init_only>true</validate_boot_init_only> + <generate_code_modified_registers_only>false</generate_code_modified_registers_only> + <custom_copyright> + <text>/* + * Copyright 2026 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +</text> + <enabled>true</enabled> + </custom_copyright> + <update_include_paths>true</update_include_paths> + <enable_parallel_routing>true</enable_parallel_routing> + <generate_registers_defines>false</generate_registers_defines> + </preferences> + <tools> + <pins name="Pins" version="17.0" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/pin_mux.c" update_enabled="true"/> + <file path="board/pin_mux.h" update_enabled="true"/> + </generated_project_files> + <pins_profile> + <processor_version>25.09.10</processor_version> + <pin_labels> + <pin_label pin_num="7" pin_signal="PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1" label="P18[2]/SD1_CLK" identifier="LED_RED"/> + <pin_label pin_num="88" pin_signal="PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5" label="S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1" identifier="LED"/> + <pin_label pin_num="11" pin_signal="PIO1_0/FC0_RTS_SCL_SSEL1/SD0_D3/CT_INP2/SCT_GPI4/PLU_OUT3/ADC0_11" label="U20[2]/SD0_D3" identifier="BUTTON"/> + </pin_labels> + <expansion_headers> + <expansion_header id="lpc_style_arduino" name="LPCXpresso V3 (Arduino compatible)"> + <connectors> + <connector id="C1" name="P16"> + <pins> + <pin id="8" external_signal_types="power_supply_3.3V" name="3.3V"/> + <pin id="10" pin_num="32" pin_signal="RESETN" name="RESET"/> + <pin id="12" external_signal_types="power_supply_3.3V" name="3.3V"/> + <pin id="14" external_signal_types="power_supply_5V" name="5V"/> + <pin id="16" external_signal_types="ground" name="GND"/> + <pin id="18" external_signal_types="ground" name="GND"/> + <pin id="20" external_signal_types="power_supply_5V" name="5V"/> + </pins> + </connector> + <connector id="C2" name="P17"> + <pins> + <pin id="1" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2" name="D15"/> + <pin id="3" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3" name="D14"/> + <pin id="5" external_signal_types="power_supply_3.3V" name="3.3V"/> + <pin id="6" pin_num="93" pin_signal="PIO1_11/FC1_TXD_SCL_MISO_WS/CT_INP5/USB0_VBUS"/> + <pin id="7" external_signal_types="ground" name="GND"/> + <pin id="8" pin_num="88" pin_signal="PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5"/> + <pin id="9" pin_num="61" pin_signal="PIO1_2/CTIMER0_MAT3/SCT_GPI6/HS_SPI_SCK/USB1_PORTPWRN/PLU_OUT5" name="D13"/> + <pin id="10" pin_num="74" pin_signal="PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS"/> + <pin id="11" pin_num="62" pin_signal="PIO1_3/SCT0_OUT4/HS_SPI_MISO/USB0_PORTPWRN/PLU_OUT6" name="D12"/> + <pin id="12" pin_num="90" pin_signal="PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19"/> + <pin id="13" pin_num="60" pin_signal="PIO0_26/FC2_RXD_SDA_MOSI_DATA/CLKOUT/CT_INP14/SCT0_OUT5/USB0_IDVALUE/FC0_SCK/HS_SPI_MOSI/SECURE_GPIO0_26" name="D11"/> + <pin id="14" pin_num="76" pin_signal="PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21"/> + <pin id="15" pin_num="59" pin_signal="PIO1_1/FC3_RXD_SDA_MOSI_DATA/CT_INP3/SCT_GPI5/HS_SPI_SSEL1/USB1_OVERCURRENTN/PLU_OUT4" name="D10"/> + <pin id="16" pin_num="85" pin_signal="PIO1_27/FC2_RTS_SCL_SSEL1/SD0_D4/CTIMER0_MAT3/CLKOUT/PLU_IN4"/> + <pin id="17" pin_num="31" pin_signal="PIO1_5/FC0_RXD_SDA_MOSI_DATA/SD0_D2/CTIMER2_MAT0/SCT_GPI0" name="D9"/> + <pin id="18" pin_num="73" pin_signal="PIO1_28/FC7_SCK/SD0_D5/CT_INP2/PLU_IN3"/> + <pin id="19" pin_num="24" pin_signal="PIO1_8/FC0_CTS_SDA_SSEL0/SD0_CLK/SCT0_OUT1/FC4_SSEL2/ADC0_4" name="D8"/> + <pin id="20" pin_num="2" pin_signal="PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N"/> + </pins> + </connector> + <connector id="C3" name="P18"> + <pins> + <pin id="1" pin_num="10" pin_signal="PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12" name="D7"/> + <pin id="2" pin_num="7" pin_signal="PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1"/> + <pin id="3" pin_num="40" pin_signal="PIO1_10/FC1_RXD_SDA_MOSI_DATA/CTIMER1_MAT0/SCT0_OUT3" name="D6"/> + <pin id="4" pin_num="57" pin_signal="PIO1_14/UTICK_CAP2/CTIMER1_MAT2/FC5_CTS_SDA_SSEL0/USB0_LEDN/SD1_CMD/ACMP0_D"/> + <pin id="5" pin_num="1" pin_signal="PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A" name="D5"/> + <pin id="6" pin_num="77" pin_signal="PIO1_25/FC2_TXD_SCL_MISO_WS/SCT0_OUT2/SD1_D0/UTICK_CAP0/PLU_CLKIN"/> + <pin id="7" pin_num="9" pin_signal="PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4" name="D4-LED_GREEN"/> + <pin id="8" pin_num="42" pin_signal="PIO1_23/FC2_SCK/SCT0_OUT0/SD1_D3/FC3_SSEL2/PLU_OUT5"/> + <pin id="10" pin_num="3" pin_signal="PIO1_24/FC2_RXD_SDA_MOSI_DATA/SCT0_OUT1/SD1_D1/FC3_SSEL3/PLU_OUT6"/> + <pin id="11" pin_num="22" pin_signal="PIO0_15/FC6_CTS_SDA_SSEL0/UTICK_CAP2/CT_INP16/SCT0_OUT2/SD0_WR_PRT/SECURE_GPIO0_15/ADC0_2" name="D2"/> + <pin id="12" pin_num="82" pin_signal="PIO1_15/UTICK_CAP3/CT_INP7/FC5_RTS_SCL_SSEL1/FC4_RTS_SCL_SSEL1/SD1_D2"/> + <pin id="13" pin_num="27" pin_signal="PIO0_27/FC2_TXD_SCL_MISO_WS/CTIMER3_MAT2/SCT0_OUT6/FC7_RXD_SDA_MOSI_DATA/PLU_OUT0/SECURE_GPIO0_27" name="D1"/> + <pin id="14" pin_num="58" pin_signal="PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF"/> + <pin id="15" pin_num="3" pin_signal="PIO1_24/FC2_RXD_SDA_MOSI_DATA/SCT0_OUT1/SD1_D1/FC3_SSEL3/PLU_OUT6" name="D0"/> + <pin id="16" pin_num="64" pin_signal="PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0"/> + <pin id="17" pin_num="87" pin_signal="PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD"/> + <pin id="18" pin_num="68" pin_signal="PIO1_26/FC2_CTS_SDA_SSEL0/SCT0_OUT3/CT_INP3/UTICK_CAP1/HS_SPI_SSEL3/PLU_IN5"/> + <pin id="19" pin_num="43" pin_signal="PIO1_17/FC6_RTS_SCL_SSEL1/SCT0_OUT4/SD1_CARD_INT_N/SD1_CARD_DET_N"/> + <pin id="20" pin_num="56" pin_signal="PIO0_18/FC4_CTS_SDA_SSEL0/SD0_WR_PRT/CTIMER1_MAT0/SCT0_OUT1/PLU_IN3/SECURE_GPIO0_18/ACMP0_C"/> + </pins> + </connector> + <connector id="C4" name="P19"> + <pins> + <pin id="2" pin_num="14" pin_signal="PIO0_16/FC4_TXD_SCL_MISO_WS/CLKOUT/CT_INP4/SECURE_GPIO0_16/ADC0_8" name="A0"/> + <pin id="4" pin_num="20" pin_signal="PIO0_23/MCLK/CTIMER1_MAT2/CTIMER3_MAT3/SCT0_OUT4/FC0_CTS_SDA_SSEL0/SD1_D1/SECURE_GPIO0_23/ADC0_0" name="A1"/> + <pin id="6" pin_num="54" pin_signal="PIO0_0/FC3_SCK/CTIMER0_MAT0/SCT_GPI0/SD1_CARD_INT_N/SECURE_GPIO0_0/ACMP0_A" name="A2"/> + <pin id="7" pin_num="91" pin_signal="PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0"/> + <pin id="8" pin_num="91" pin_signal="PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0" name="A3"/> + <pin id="9" pin_num="71" pin_signal="PIO0_13/FC1_CTS_SDA_SSEL0/UTICK_CAP0/CT_INP0/SCT_GPI0/FC1_RXD_SDA_MOSI_DATA/PLU_IN0/SECURE_GPIO0_13"/> + <pin id="10" pin_num="71" pin_signal="PIO0_13/FC1_CTS_SDA_SSEL0/UTICK_CAP0/CT_INP0/SCT_GPI0/FC1_RXD_SDA_MOSI_DATA/PLU_IN0/SECURE_GPIO0_13" name="A4"/> + <pin id="11" pin_num="72" pin_signal="PIO0_14/FC1_RTS_SCL_SSEL1/UTICK_CAP1/CT_INP1/SCT_GPI1/FC1_TXD_SCL_MISO_WS/PLU_IN1/SECURE_GPIO0_14"/> + <pin id="12" pin_num="72" pin_signal="PIO0_14/FC1_RTS_SCL_SSEL1/UTICK_CAP1/CT_INP1/SCT_GPI1/FC1_TXD_SCL_MISO_WS/PLU_IN1/SECURE_GPIO0_14" name="A5"/> + </pins> + </connector> + </connectors> + </expansion_header> + </expansion_headers> + </pins_profile> + <functions_list> + <function name="BOARD_InitDEBUG_UARTPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM0" description="Peripheral FLEXCOMM0 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM0" signal="RXD_SDA_MOSI_DATA" pin_num="92" pin_signal="PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM0" signal="TXD_SCL_MISO_WS" pin_num="94" pin_signal="PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitSWD_DEBUGPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="SWD" description="Peripheral SWD signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="SWD" signal="SWCLK" pin_num="13" pin_signal="PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9"> + <pin_features> + <pin_feature name="mode" value="pullDown"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SWD" signal="SWDIO" pin_num="12" pin_signal="PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="SWD" signal="SWO" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1"> + <pin_features> + <pin_feature name="identifier" value="DEBUG_SWD_SWO"/> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitUSBPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="USBFSH" description="Peripheral USBFSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="USBHSH" description="Peripheral USBHSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="USBFSH" signal="USB_DP" pin_num="97" pin_signal="USB0_DP"/> + <pin peripheral="USBFSH" signal="USB_DM" pin_num="98" pin_signal="USB0_DM"/> + <pin peripheral="USBFSH" signal="USB_VBUS" pin_num="78" pin_signal="PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="USBHSH" signal="USB_DM" pin_num="35" pin_signal="USB1_DM"/> + <pin peripheral="USBHSH" signal="USB_DP" pin_num="34" pin_signal="USB1_DP"/> + <pin peripheral="USBHSH" signal="USB_VBUS" pin_num="36" pin_signal="USB1_VBUS"/> + <pin peripheral="USBHSH" signal="USB_OVERCURRENTN" pin_num="65" pin_signal="PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBFSH" signal="USB_OVERCURRENTN" pin_num="66" pin_signal="PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBFSH" signal="USB_PORTPWRN" pin_num="67" pin_signal="PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + <pin peripheral="USBHSH" signal="USB_PORTPWRN" pin_num="80" pin_signal="PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitLEDsPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="GPIO" signal="PIO0, 5" pin_num="88" pin_signal="PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5"> + <pin_features> + <pin_feature name="direction" value="OUTPUT"/> + <pin_feature name="gpio_init_state" value="true"/> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitBUTTONsPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="SYSCON" signal="RESET" pin_num="32" pin_signal="RESETN"/> + <pin peripheral="GPIO" signal="PIO1, 0" pin_num="11" pin_signal="PIO1_0/FC0_RTS_SCL_SSEL1/SD0_D3/CT_INP2/SCT_GPI4/PLU_OUT3/ADC0_11"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="pullUp"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitPins_Core0"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins_Core0"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins/> + </function> + <function name="BOARD_InitPins_Core1"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>true</callFromInitBoot> + <coreID>cm33_core1</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins_Core1"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins/> + </function> + <function name="BOARD_InitI2SPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM7" description="Peripheral FLEXCOMM7 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM6" description="Peripheral FLEXCOMM6 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="SYSCON" signal="MCLK" pin_num="91" pin_signal="PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0"> + <pin_features> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="SCK" pin_num="76" pin_signal="PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="RXD_SDA_MOSI_DATA" pin_num="74" pin_signal="PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM7" signal="TXD_SCL_MISO_WS" pin_num="90" pin_signal="PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="SCK" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1"> + <pin_features> + <pin_feature name="identifier" value="FC6_I2S_CLK"/> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="enabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="RXD_SDA_MOSI_DATA" pin_num="2" pin_signal="PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM6" signal="TXD_SCL_MISO_WS" pin_num="87" pin_signal="PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + <function name="BOARD_InitACCELPins"> + <description>Configures pin routing and optionally pin electrical features.</description> + <options> + <callFromInitBoot>false</callFromInitBoot> + <coreID>cm33_core0</coreID> + <enableClock>true</enableClock> + </options> + <dependencies> + <dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitACCELPins"> + <feature name="initialized" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <pins> + <pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2"> + <pin_features> + <pin_feature name="mode" value="pullUp"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + </pin_features> + </pin> + <pin peripheral="GPIO" signal="PIO1, 19" pin_num="58" pin_signal="PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF"> + <pin_features> + <pin_feature name="direction" value="INPUT"/> + <pin_feature name="mode" value="inactive"/> + <pin_feature name="slew_rate" value="standard"/> + <pin_feature name="invert" value="disabled"/> + <pin_feature name="open_drain" value="disabled"/> + <pin_feature name="asw" value="disabled"/> + </pin_features> + </pin> + </pins> + </function> + </functions_list> + </pins> + <clocks name="Clocks" version="18.0" enabled="true" update_project_code="true"> + <generated_project_files> + <file path="board/clock_config.c" update_enabled="true"/> + <file path="board/clock_config.h" update_enabled="true"/> + </generated_project_files> + <clocks_profile> + <processor_version>25.09.10</processor_version> + </clocks_profile> + <clock_configurations> + <clock_configuration name="BOARD_BootClockFRO12M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources/> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="12 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings/> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockFROHF96M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="ANACTRL.fro_hf.outFreq" value="96 MHz" locked="false" enabled="false"/> + </clock_sources> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="96 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG" value="Enable" locked="false"/> + <setting id="SYSCON.MAINCLKSELA.sel" value="ANACTRL.fro_hf_clk" locked="false"/> + </clock_settings> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockPLL100M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="direction" evaluation=""> + <data>INPUT</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="direction" evaluation=""> + <data>OUTPUT</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/> + </clock_sources> + <clock_outputs> + <clock_output id="System_clock.outFreq" value="100 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="PLL0_Mode" value="Normal" locked="false"/> + <setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/> + <setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/> + <setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL0_BYPASS" locked="false"/> + <setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL0M_MULT.scale" value="100" locked="true"/> + <setting id="SYSCON.PLL0N_DIV.scale" value="4" locked="true"/> + <setting id="SYSCON.PLL0_PDEC.scale" value="4" locked="true"/> + </clock_settings> + <called_from_default_init>false</called_from_default_init> + </clock_configuration> + <clock_configuration name="BOARD_BootClockPLL150M" id_prefix="" prefix_user_defined="false"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="direction" evaluation=""> + <data>INPUT</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="routed" evaluation=""> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="direction" evaluation=""> + <data>OUTPUT</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core1"> + <data>true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M"> + <feature name="enabled" evaluation="equal" configuration="cm33_core0"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <clock_sources> + <clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/> + </clock_sources> + <clock_outputs> + <clock_output id="FXCOM0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/> + <clock_output id="System_clock.outFreq" value="144 MHz" locked="false" accuracy=""/> + <clock_output id="USB0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/> + <clock_output id="USB1_PHY_clock.outFreq" value="16 MHz" locked="false" accuracy=""/> + </clock_outputs> + <clock_settings> + <setting id="PLL0_Mode" value="Normal" locked="false"/> + <setting id="PLL1_Mode" value="Normal" locked="false"/> + <setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/> + <setting id="ENABLE_PLL_USB_OUT" value="Enabled" locked="false"/> + <setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/> + <setting id="SYSCON.FCCLKSEL0.sel" value="SYSCON.PLL0DIV" locked="false"/> + <setting id="SYSCON.FRGCTRL0_DIV.scale" value="400" locked="false"/> + <setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL1_BYPASS" locked="false"/> + <setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL0DIV.scale" value="2" locked="false"/> + <setting id="SYSCON.PLL0M_MULT.scale" value="150" locked="true"/> + <setting id="SYSCON.PLL0N_DIV.scale" value="8" locked="true"/> + <setting id="SYSCON.PLL0_PDEC.scale" value="2" locked="true"/> + <setting id="SYSCON.PLL1CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/> + <setting id="SYSCON.PLL1M_MULT.scale" value="18" locked="false"/> + <setting id="SYSCON.PLL1_PDEC.scale" value="2" locked="false"/> + <setting id="SYSCON.USB0CLKDIV.scale" value="3" locked="false"/> + <setting id="SYSCON.USB0CLKSEL.sel" value="SYSCON.MAINCLKSELB" locked="false"/> + </clock_settings> + <called_from_default_init>true</called_from_default_init> + </clock_configuration> + </clock_configurations> + </clocks> + <dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <dcdx_profile> + <processor_version>0.0.0</processor_version> + </dcdx_profile> + <dcdx_configurations/> + </dcdx> + <periphs name="Peripherals" version="15.0" enabled="true" update_project_code="true"> + <dependencies> + <dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="FLEXCOMM USART Driver is not found in the toolchain/IDE project. The project will not compile!" problem_level="2" source="Peripherals"> + <feature name="enabled" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + <dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="An unsupported version of the FLEXCOMM USART Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. The project might not compile correctly." problem_level="1" source="Peripherals"> + <feature name="version" evaluation="equivalent"> + <data type="Version">2.2.0</data> + </feature> + </dependency> + <dependency resourceType="Tool" resourceId="Clocks" description="The Clocks tool is required by the Peripherals tool, but it is disabled." problem_level="2" source="Peripherals"> + <feature name="enabled" evaluation="equal"> + <data>true</data> + </feature> + </dependency> + </dependencies> + <generated_project_files> + <file path="board/peripherals.c" update_enabled="true"/> + <file path="board/peripherals.h" update_enabled="true"/> + </generated_project_files> + <peripherals_profile> + <processor_version>25.09.10</processor_version> + </peripherals_profile> + <functional_groups> + <functional_group name="BOARD_InitPeripherals_cm33_core0" uuid="61d0725d-b300-49cb-9c66-b5edfbf8ffc1" called_from_default_init="true" id_prefix="" core="cm33_core0"> + <description></description> + <options/> + <dependencies> + <dependency resourceType="ClockOutput" resourceId="FXCOM0_clock" description="FXCOM0 clock is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals_cm33_core0"> + <feature name="frequency" evaluation="greaterThan"> + <data type="Frequency" unit="Hz">0</data> + </feature> + </dependency> + <dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_rxd" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals_cm33_core0"> + <feature name="routed" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + <dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_txd" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals_cm33_core0"> + <feature name="routed" evaluation="equal"> + <data type="Boolean">true</data> + </feature> + </dependency> + </dependencies> + <instances> + <instance name="ACCEL" uuid="b999c56a-0d01-4089-9311-9224db5272f4" type="flexcomm_i2c" type_id="flexcomm_i2c_2.3.0" mode="I2C_Polling" peripheral="FLEXCOMM4" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="fsl_i2c" quick_selection="QS_I2C_Master"> + <setting name="i2c_mode" value="kI2C_Master"/> + <setting name="clockSource" value="FXCOMFunctionClock"/> + <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/> + <struct name="i2c_master_config"> + <setting name="enableMaster" value="true"/> + <setting name="baudRate_Bps" value="100000"/> + <setting name="enableTimeout" value="false"/> + <setting name="timeout_Ms" value="35"/> + </struct> + </config_set> + </instance> + <instance name="DEBUG_UART" uuid="9fb0504c-6159-43e2-98bb-51d75f06133a" type="flexcomm_usart" type_id="flexcomm_usart_2.2.0" mode="polling" peripheral="FLEXCOMM0" enabled="true" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="usartConfig_t"> + <struct name="usartConfig"> + <setting name="clockSource" value="FXCOMFunctionClock"/> + <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/> + <setting name="baudRate_Bps" value="115200"/> + <setting name="syncMode" value="kUSART_SyncModeDisabled"/> + <setting name="parityMode" value="kUSART_ParityDisabled"/> + <setting name="stopBitCount" value="kUSART_OneStopBit"/> + <setting name="bitCountPerChar" value="kUSART_8BitsPerChar"/> + <setting name="loopback" value="false"/> + <setting name="txWatermark" value="kUSART_TxFifo0"/> + <setting name="rxWatermark" value="kUSART_RxFifo1"/> + <setting name="enableRx" value="true"/> + <setting name="enableTx" value="true"/> + <setting name="clockPolarity" value="kUSART_RxSampleOnFallingEdge"/> + <setting name="enableContinuousSCLK" value="false"/> + </struct> + </config_set> + </instance> + <instance name="LEDS" uuid="f5ad3a56-404b-44cb-8abc-7b25b5551d33" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="lpc_gpio"/> + </instance> + <instance name="SW" uuid="d57ddfca-dc72-486c-a145-c7a2ab1e1a66" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false"> + <config_set name="lpc_gpio"/> + </instance> + <instance name="NVIC" uuid="56761ad9-9b77-4074-917d-de0fde10cd48" type="nvic" type_id="nvic" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false"> + <config_set name="nvic"> + <array name="interrupt_table"/> + <array name="interrupts"/> + </config_set> + </instance> + </instances> + </functional_group> + <functional_group name="BOARD_InitPeripherals_cm33_core1" uuid="e2041cd4-ebb6-45a5-807f-e0c2dc047d48" called_from_default_init="false" id_prefix="" core="cm33_core1"> + <description></description> + <options/> + <dependencies/> + <instances> + <instance name="NVIC_2" uuid="db546092-4c45-40af-938a-8cc58edd1c4f" type="nvic" type_id="nvic" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false"> + <config_set name="nvic"> + <array name="interrupt_table"/> + <array name="interrupts"/> + </config_set> + </instance> + </instances> + </functional_group> + </functional_groups> + <components> + <component name="system" uuid="905d2747-654a-47d9-91f9-81a5c6f9c407" type_id="system"> + <config_set_global name="global_system_definitions"> + <setting name="user_definitions" value=""/> + <setting name="user_includes" value=""/> + <setting name="global_init" value=""/> + </config_set_global> + </component> + <component name="msg" uuid="64cbcd7c-424d-4baf-9681-a60878969fb6" type_id="msg"> + <config_set_global name="global_messages"/> + </component> + <component name="generic_can" uuid="b9b018dd-ef4e-41f6-b456-f91b855cb391" type_id="generic_can"> + <config_set_global name="global_can"/> + </component> + <component name="uart_cmsis_common" uuid="bafa6375-9184-4272-8102-06ea086041d7" type_id="uart_cmsis_common"> + <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/> + </component> + <component name="generic_uart" uuid="1710dc7f-381f-4b37-8f78-0fd2f923b3ac" type_id="generic_uart"> + <config_set_global name="global_uart"/> + </component> + <component name="generic_enet" uuid="c7fc4395-b141-4b13-a326-4145e765b2b7" type_id="generic_enet"> + <config_set_global name="global_enet"/> + </component> + <component name="gpio_adapter_common" uuid="b6ee89c2-4c58-4181-94dc-af13d8ae8ea5" type_id="gpio_adapter_common"> + <config_set_global name="global_gpio_adapter_common" quick_selection="default"/> + </component> + </components> + </periphs> + <tee name="TEE" version="10.0" enabled="false" update_project_code="true"> + <generated_project_files/> + <tee_profile> + <processor_version>0.0.0</processor_version> + <tool_options> + <option id="_output_type_" value="c_code"/> + <option id="_legacy_source_names_" value="yes"/> + </tool_options> + </tee_profile> + <functional_group name="BOARD_InitTrustZone" called_from_default_init="true" id_prefix="" prefix_user_defined="true"> + <description></description> + <options/> + <ahb> + <relative_region start="0" size="655360" security="s_priv" memory="PROGRAM_FLASH"/> + <relative_region start="0" size="131072" security="s_priv" memory="BootROM"/> + <relative_region start="0" size="32768" security="s_priv" memory="SRAMX"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM0"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM1"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM2"/> + <relative_region start="0" size="65536" security="s_priv" memory="SRAM3"/> + <relative_region start="0" size="16384" security="s_priv" memory="SRAM4"/> + <relative_region start="0" size="16384" security="s_priv" memory="AHBperipherals_port10_ahb_secure_ctrl_area"/> + <relative_region start="0" size="16384" security="s_priv" memory="USB_RAM"/> + <masters> + <master id="HASH" security="ns_user"/> + <master id="MCM33C" security="ns_user"/> + <master id="MCM33S" security="ns_user"/> + <master id="PQ" security="ns_user"/> + <master id="SDIO" security="ns_user"/> + <master id="SDMA0" security="ns_user"/> + <master id="SDMA1" security="ns_user"/> + <master id="USBFSD" security="ns_user"/> + <master id="USBFSH" security="ns_user"/> + </masters> + <peripherals> + <peripheral id="ADC0" security="s_priv"/> + <peripheral id="AHB_SECURE_CTRL" security="s_priv"/> + <peripheral id="ANACTRL" security="s_priv"/> + <peripheral id="CASPER" security="s_priv"/> + <peripheral id="CRC_ENGINE" security="s_priv"/> + <peripheral id="CTIMER0" security="s_priv"/> + <peripheral id="CTIMER1" security="s_priv"/> + <peripheral id="CTIMER2" security="s_priv"/> + <peripheral id="CTIMER3" security="s_priv"/> + <peripheral id="CTIMER4" security="s_priv"/> + <peripheral id="DBGMAILBOX" security="s_priv"/> + <peripheral id="DMA0" security="s_priv"/> + <peripheral id="DMA1" security="s_priv"/> + <peripheral id="FLASH" security="s_priv"/> + <peripheral id="FLEXCOMM0" security="s_priv"/> + <peripheral id="FLEXCOMM1" security="s_priv"/> + <peripheral id="FLEXCOMM2" security="s_priv"/> + <peripheral id="FLEXCOMM3" security="s_priv"/> + <peripheral id="FLEXCOMM4" security="s_priv"/> + <peripheral id="FLEXCOMM5" security="s_priv"/> + <peripheral id="FLEXCOMM6" security="s_priv"/> + <peripheral id="FLEXCOMM7" security="s_priv"/> + <peripheral id="GINT0" security="s_priv"/> + <peripheral id="GINT1" security="s_priv"/> + <peripheral id="GPIO" security="s_priv"/> + <peripheral id="HASHCRYPT" security="s_priv"/> + <peripheral id="INPUTMUX" security="s_priv"/> + <peripheral id="IOCON" security="s_priv"/> + <peripheral id="MAILBOX" security="s_priv"/> + <peripheral id="MRT0" security="s_priv"/> + <peripheral id="OSTIMER" security="s_priv"/> + <peripheral id="PINT" security="s_priv"/> + <peripheral id="PLU" security="s_priv"/> + <peripheral id="PMC" security="s_priv"/> + <peripheral id="POWERQUAD" security="s_priv"/> + <peripheral id="PRINCE" security="s_priv"/> + <peripheral id="PUF" security="s_priv"/> + <peripheral id="RNG" security="s_priv"/> + <peripheral id="RTC" security="s_priv"/> + <peripheral id="SCT0" security="s_priv"/> + <peripheral id="SDIF" security="s_priv"/> + <peripheral id="SECGPIO" security="s_priv"/> + <peripheral id="SECPINT" security="s_priv"/> + <peripheral id="SPI8" security="s_priv"/> + <peripheral id="SYSCON" security="s_priv"/> + <peripheral id="SYSCTL" security="s_priv"/> + <peripheral id="USB0" security="s_priv"/> + <peripheral id="USBFSH" security="s_priv"/> + <peripheral id="USBHSD" security="s_priv"/> + <peripheral id="USBHSH" security="s_priv"/> + <peripheral id="USBPHY" security="s_priv"/> + <peripheral id="UTICK0" security="s_priv"/> + <peripheral id="WWDT" security="s_priv"/> + </peripherals> + <interrupts> + <masking> + <interrupt id="acmp_capt_irq" masked="Masked"/> + <interrupt id="adc_irq" masked="Masked"/> + <interrupt id="casper_irq" masked="Masked"/> + <interrupt id="ctimer0_irq" masked="Masked"/> + <interrupt id="ctimer1_irq" masked="Masked"/> + <interrupt id="ctimer2_irq" masked="Masked"/> + <interrupt id="ctimer3_irq" masked="Masked"/> + <interrupt id="ctimer4_irq" masked="Masked"/> + <interrupt id="flexcomm0_irq" masked="Masked"/> + <interrupt id="flexcomm1_irq" masked="Masked"/> + <interrupt id="flexcomm2_irq" masked="Masked"/> + <interrupt id="flexcomm3_irq" masked="Masked"/> + <interrupt id="flexcomm4_irq" masked="Masked"/> + <interrupt id="flexcomm5_irq" masked="Masked"/> + <interrupt id="flexcomm6_irq" masked="Masked"/> + <interrupt id="flexcomm7_irq" masked="Masked"/> + <interrupt id="global_irq0" masked="Masked"/> + <interrupt id="global_irq1" masked="Masked"/> + <interrupt id="lspi_hs_irq" masked="Masked"/> + <interrupt id="mailbox_irq" masked="Masked"/> + <interrupt id="mrt_irq" masked="Masked"/> + <interrupt id="os_event_irq" masked="Masked"/> + <interrupt id="pin_int4" masked="Masked"/> + <interrupt id="pin_int5" masked="Masked"/> + <interrupt id="pin_int6" masked="Masked"/> + <interrupt id="pin_int7" masked="Masked"/> + <interrupt id="pin_irq0" masked="Masked"/> + <interrupt id="pin_irq1" masked="Masked"/> + <interrupt id="pin_irq2" masked="Masked"/> + <interrupt id="pin_irq3" masked="Masked"/> + <interrupt id="plu_irq" masked="Masked"/> + <interrupt id="pq_irq" masked="Masked"/> + <interrupt id="qddkey_irq" masked="Masked"/> + <interrupt id="rtc_irq" masked="Masked"/> + <interrupt id="sct_irq" masked="Masked"/> + <interrupt id="sdio_irq" masked="Masked"/> + <interrupt id="sdma0_irq" masked="Masked"/> + <interrupt id="sdma1_irq" masked="Masked"/> + <interrupt id="sec_hypervisor_call_irq" masked="Masked"/> + <interrupt id="sec_int0" masked="Masked"/> + <interrupt id="sec_int1" masked="Masked"/> + <interrupt id="sec_vio_irq" masked="Masked"/> + <interrupt id="sha_irq" masked="Masked"/> + <interrupt id="sys_irq" masked="Masked"/> + <interrupt id="usb0_irq" masked="Masked"/> + <interrupt id="usb0_needclk_irq" masked="Masked"/> + <interrupt id="usb1_irq" masked="Masked"/> + <interrupt id="usb1_needclk_irq" masked="Masked"/> + <interrupt id="usb1_utmi_irq" masked="Masked"/> + <interrupt id="utick_irq" masked="Masked"/> + </masking> + <security> + <interrupt id="acmp_capt_irq" secure="Secure"/> + <interrupt id="adc_irq" secure="Secure"/> + <interrupt id="casper_irq" secure="Secure"/> + <interrupt id="ctimer0_irq" secure="Secure"/> + <interrupt id="ctimer1_irq" secure="Secure"/> + <interrupt id="ctimer2_irq" secure="Secure"/> + <interrupt id="ctimer3_irq" secure="Secure"/> + <interrupt id="ctimer4_irq" secure="Secure"/> + <interrupt id="flexcomm0_irq" secure="Secure"/> + <interrupt id="flexcomm1_irq" secure="Secure"/> + <interrupt id="flexcomm2_irq" secure="Secure"/> + <interrupt id="flexcomm3_irq" secure="Secure"/> + <interrupt id="flexcomm4_irq" secure="Secure"/> + <interrupt id="flexcomm5_irq" secure="Secure"/> + <interrupt id="flexcomm6_irq" secure="Secure"/> + <interrupt id="flexcomm7_irq" secure="Secure"/> + <interrupt id="global_irq0" secure="Secure"/> + <interrupt id="global_irq1" secure="Secure"/> + <interrupt id="lspi_hs_irq" secure="Secure"/> + <interrupt id="mailbox_irq" secure="Secure"/> + <interrupt id="mrt_irq" secure="Secure"/> + <interrupt id="os_event_irq" secure="Secure"/> + <interrupt id="pin_int4" secure="Secure"/> + <interrupt id="pin_int5" secure="Secure"/> + <interrupt id="pin_int6" secure="Secure"/> + <interrupt id="pin_int7" secure="Secure"/> + <interrupt id="pin_irq0" secure="Secure"/> + <interrupt id="pin_irq1" secure="Secure"/> + <interrupt id="pin_irq2" secure="Secure"/> + <interrupt id="pin_irq3" secure="Secure"/> + <interrupt id="plu_irq" secure="Secure"/> + <interrupt id="pq_irq" secure="Secure"/> + <interrupt id="qddkey_irq" secure="Secure"/> + <interrupt id="rtc_irq" secure="Secure"/> + <interrupt id="sct_irq" secure="Secure"/> + <interrupt id="sdio_irq" secure="Secure"/> + <interrupt id="sdma0_irq" secure="Secure"/> + <interrupt id="sdma1_irq" secure="Secure"/> + <interrupt id="sec_hypervisor_call_irq" secure="Secure"/> + <interrupt id="sec_int0" secure="Secure"/> + <interrupt id="sec_int1" secure="Secure"/> + <interrupt id="sec_vio_irq" secure="Secure"/> + <interrupt id="sha_irq" secure="Secure"/> + <interrupt id="sys_irq" secure="Secure"/> + <interrupt id="usb0_irq" secure="Secure"/> + <interrupt id="usb0_needclk_irq" secure="Secure"/> + <interrupt id="usb1_irq" secure="Secure"/> + <interrupt id="usb1_needclk_irq" secure="Secure"/> + <interrupt id="usb1_utmi_irq" secure="Secure"/> + <interrupt id="utick_irq" secure="Secure"/> + </security> + </interrupts> + <ports> + <port id="pio0"> + <pin_mask id="0" masked="Masked"/> + <pin_mask id="1" masked="Masked"/> + <pin_mask id="10" masked="Masked"/> + <pin_mask id="11" masked="Masked"/> + <pin_mask id="12" masked="Masked"/> + <pin_mask id="13" masked="Masked"/> + <pin_mask id="14" masked="Masked"/> + <pin_mask id="15" masked="Masked"/> + <pin_mask id="16" masked="Masked"/> + <pin_mask id="17" masked="Masked"/> + <pin_mask id="18" masked="Masked"/> + <pin_mask id="19" masked="Masked"/> + <pin_mask id="2" masked="Masked"/> + <pin_mask id="20" masked="Masked"/> + <pin_mask id="21" masked="Masked"/> + <pin_mask id="22" masked="Masked"/> + <pin_mask id="23" masked="Masked"/> + <pin_mask id="24" masked="Masked"/> + <pin_mask id="25" masked="Masked"/> + <pin_mask id="26" masked="Masked"/> + <pin_mask id="27" masked="Masked"/> + <pin_mask id="28" masked="Masked"/> + <pin_mask id="29" masked="Masked"/> + <pin_mask id="3" masked="Masked"/> + <pin_mask id="30" masked="Masked"/> + <pin_mask id="31" masked="Masked"/> + <pin_mask id="4" masked="Masked"/> + <pin_mask id="5" masked="Masked"/> + <pin_mask id="6" masked="Masked"/> + <pin_mask id="7" masked="Masked"/> + <pin_mask id="8" masked="Masked"/> + <pin_mask id="9" masked="Masked"/> + </port> + <port id="pio1"> + <pin_mask id="0" masked="Masked"/> + <pin_mask id="1" masked="Masked"/> + <pin_mask id="10" masked="Masked"/> + <pin_mask id="11" masked="Masked"/> + <pin_mask id="12" masked="Masked"/> + <pin_mask id="13" masked="Masked"/> + <pin_mask id="14" masked="Masked"/> + <pin_mask id="15" masked="Masked"/> + <pin_mask id="16" masked="Masked"/> + <pin_mask id="17" masked="Masked"/> + <pin_mask id="18" masked="Masked"/> + <pin_mask id="19" masked="Masked"/> + <pin_mask id="2" masked="Masked"/> + <pin_mask id="20" masked="Masked"/> + <pin_mask id="21" masked="Masked"/> + <pin_mask id="22" masked="Masked"/> + <pin_mask id="23" masked="Masked"/> + <pin_mask id="24" masked="Masked"/> + <pin_mask id="25" masked="Masked"/> + <pin_mask id="26" masked="Masked"/> + <pin_mask id="27" masked="Masked"/> + <pin_mask id="28" masked="Masked"/> + <pin_mask id="29" masked="Masked"/> + <pin_mask id="3" masked="Masked"/> + <pin_mask id="30" masked="Masked"/> + <pin_mask id="31" masked="Masked"/> + <pin_mask id="4" masked="Masked"/> + <pin_mask id="5" masked="Masked"/> + <pin_mask id="6" masked="Masked"/> + <pin_mask id="7" masked="Masked"/> + <pin_mask id="8" masked="Masked"/> + <pin_mask id="9" masked="Masked"/> + </port> + </ports> + </ahb> + <saus> + <sau enabled="true" all_non_secure="false" generate_code_for_disabled_regions="false"> + <region start="0" size="268435456" security="ns" enabled="true" index="0"/> + <region start="536870912" size="3221225472" security="ns" enabled="true" index="1"/> + <region start="0" size="32" security="ns" enabled="false" index="2"/> + <region start="0" size="32" security="ns" enabled="false" index="3"/> + <region start="0" size="32" security="ns" enabled="false" index="4"/> + <region start="0" size="32" security="ns" enabled="false" index="5"/> + <region start="0" size="32" security="ns" enabled="false" index="6"/> + <region start="0" size="32" security="ns" enabled="false" index="7"/> + </sau> + </saus> + <global_options> + <option id="AIRCR_PRIS" value="no"/> + <option id="AIRCR_BFHFNMINS" value="no"/> + <option id="AIRCR_SYSRESETREQS" value="no"/> + <option id="SCR_SLEEPDEEPS" value="no"/> + <option id="SHCSR_SECUREFAULTENA" value="no"/> + <option id="CPACR_CP0" value="3"/> + <option id="CPACR_CP1" value="3"/> + <option id="CPACR_CP2" value="0"/> + <option id="CPACR_CP3" value="0"/> + <option id="CPACR_CP4" value="0"/> + <option id="CPACR_CP5" value="0"/> + <option id="CPACR_CP6" value="0"/> + <option id="CPACR_CP7" value="0"/> + <option id="CPACR_CP10" value="3"/> + <option id="CPACR_CP11" value="3"/> + <option id="NSACR_CP0" value="yes"/> + <option id="NSACR_CP1" value="yes"/> + <option id="NSACR_CP2" value="no"/> + <option id="NSACR_CP3" value="no"/> + <option id="NSACR_CP4" value="no"/> + <option id="NSACR_CP5" value="no"/> + <option id="NSACR_CP6" value="no"/> + <option id="NSACR_CP7" value="no"/> + <option id="NSACR_CP10" value="yes"/> + <option id="NSACR_CP11" value="yes"/> + <option id="CPPWR_SU0" value="no"/> + <option id="CPPWR_SUS0" value="no"/> + <option id="CPPWR_SU1" value="no"/> + <option id="CPPWR_SUS1" value="no"/> + <option id="CPPWR_SU2" value="no"/> + <option id="CPPWR_SUS2" value="no"/> + <option id="CPPWR_SU3" value="no"/> + <option id="CPPWR_SUS3" value="no"/> + <option id="CPPWR_SU4" value="no"/> + <option id="CPPWR_SUS4" value="no"/> + <option id="CPPWR_SU5" value="no"/> + <option id="CPPWR_SUS5" value="no"/> + <option id="CPPWR_SU6" value="no"/> + <option id="CPPWR_SUS6" value="no"/> + <option id="CPPWR_SU7" value="no"/> + <option id="CPPWR_SUS7" value="no"/> + <option id="CPPWR_SU10" value="no"/> + <option id="CPPWR_SUS10" value="no"/> + <option id="CPPWR_SU11" value="no"/> + <option id="CPPWR_SUS11" value="no"/> + <option id="SEC_GPIO_MASK0_LOCK" value="no"/> + <option id="SEC_GPIO_MASK1_LOCK" value="no"/> + <option id="SEC_CPU1_INT_MASK0_LOCK" value="no"/> + <option id="SEC_CPU1_INT_MASK1_LOCK" value="no"/> + <option id="MASTER_SEC_LEVEL_LOCK" value="no"/> + <option id="CPU0_LOCK_NS_VTOR" value="no"/> + <option id="CPU0_LOCK_NS_MPU" value="no"/> + <option id="CPU0_LOCK_S_VTAIRCR" value="no"/> + <option id="CPU0_LOCK_S_MPU" value="no"/> + <option id="CPU0_LOCK_SAU" value="no"/> + <option id="CPU0_LOCK_REG_LOCK" value="no"/> + <option id="CPU1_LOCK_NS_VTOR" value="no"/> + <option id="CPU1_LOCK_NS_MPU" value="no"/> + <option id="CPU1_LOCK_REG_LOCK" value="no"/> + <option id="AHB_MISC_CTRL_REG_ENABLE_SECURE_CHECKING" value="yes"/> + <option id="AHB_MISC_CTRL_REG_ENABLE_S_PRIV_CHECK" value="yes"/> + <option id="AHB_MISC_CTRL_REG_ENABLE_NS_PRIV_CHECK" value="yes"/> + <option id="AHB_MISC_CTRL_REG_DISABLE_VIOLATION_ABORT" value="no"/> + <option id="AHB_MISC_CTRL_REG_DISABLE_SIMPLE_MASTER_STRICT_MODE" value="no"/> + <option id="AHB_MISC_CTRL_REG_DISABLE_SMART_MASTER_STRICT_MODE" value="no"/> + <option id="AHB_MISC_CTRL_REG_IDAU_ALL_NS" value="no"/> + <option id="AHB_MISC_CTRL_REG_WRITE_LOCK" value="yes"/> + </global_options> + <mpus> + <mpu enabled="false" priv_default_map="false" handler_enabled="false" id="s" generate_code_for_disabled_regions="false"> + <attributes> + <group index="0" id="Code" memory_type="normal" device="nGnRE"/> + <group index="1" id="RAM" memory_type="normal" device="nGnRE"/> + <group index="2" id="Peripheral" memory_type="device" device="nGnRE"/> + <group index="3" id="3" memory_type="device" device="nGnRE"/> + <group index="4" id="4" memory_type="device" device="nGnRE"/> + <group index="5" id="5" memory_type="device" device="nGnRE"/> + <group index="6" id="6" memory_type="device" device="nGnRE"/> + <group index="7" id="7" memory_type="device" device="nGnRE"/> + </attributes> + <regions> + <region start="0" size="32" security="priv" enabled="false" index="0" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="1" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="2" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="3" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="4" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="5" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="6" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="7" executable="false" read_only="false" attributes_index="0"/> + </regions> + </mpu> + <mpu enabled="false" priv_default_map="false" handler_enabled="false" id="ns" generate_code_for_disabled_regions="false"> + <attributes> + <group index="0" id="Code" memory_type="normal" device="nGnRE"/> + <group index="1" id="RAM" memory_type="normal" device="nGnRE"/> + <group index="2" id="Peripheral" memory_type="device" device="nGnRE"/> + <group index="3" id="3" memory_type="device" device="nGnRE"/> + <group index="4" id="4" memory_type="device" device="nGnRE"/> + <group index="5" id="5" memory_type="device" device="nGnRE"/> + <group index="6" id="6" memory_type="device" device="nGnRE"/> + <group index="7" id="7" memory_type="device" device="nGnRE"/> + </attributes> + <regions> + <region start="0" size="32" security="priv" enabled="false" index="0" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="1" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="2" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="3" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="4" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="5" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="6" executable="false" read_only="false" attributes_index="0"/> + <region start="0" size="32" security="priv" enabled="false" index="7" executable="false" read_only="false" attributes_index="0"/> + </regions> + </mpu> + </mpus> + </functional_group> + </tee> + </tools> +</configuration> diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 115c41bfb..b5d097234 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -33,9 +33,12 @@ #include "fsl_device_registers.h" #include "fsl_gpio.h" #include "fsl_power.h" -#include "fsl_iocon.h" #include "fsl_usart.h" +#include "board/pin_mux.h" +#include "board/clock_config.h" +#include "board/peripherals.h" + #ifdef NEOPIXEL_PIN #include "fsl_sctimer.h" #include "sct_neopixel.h" @@ -45,23 +48,6 @@ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -// IOCON pin mux -#define IOCON_PIO_DIGITAL_EN 0x0100u // Enables digital function -#define IOCON_PIO_FUNC0 0x00u // Selects pin function 0 -#define IOCON_PIO_FUNC1 0x01u // Selects pin function 1 -#define IOCON_PIO_FUNC4 0x04u // Selects pin function 4 -#define IOCON_PIO_FUNC7 0x07u // Selects pin function 7 -#define IOCON_PIO_INV_DI 0x00u // Input function is not inverted -#define IOCON_PIO_MODE_INACT 0x00u // No addition pin function -#define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled -#define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled -#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ - -#define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC0) // Digital pin function 0 enabled -#define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC1) // Digital pin function 1 enabled -#define IOCON_PIO_DIG_FUNC4_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC4) // Digital pin function 2 enabled -#define IOCON_PIO_DIG_FUNC7_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC7) // Digital pin function 2 enabled - //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ @@ -73,74 +59,12 @@ void USB1_IRQHandler(void) { tusb_int_handler(1, true); } -/**************************************************************** -name: BOARD_BootClockPLL100M -outputs: -- {id: System_clock.outFreq, value: 100 MHz} -settings: -- {id: PLL0_Mode, value: Normal} -- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable} -- {id: ENABLE_CLKIN_ENA, value: Enabled} -- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} -- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS} -- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} -- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true} -- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true} -- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true} -sources: -- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz} -- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} -******************************************************************/ -void BOARD_BootClockPLL100M(void) -{ - /*!< Set up the clock sources */ - /*!< Configure FRO192M */ - POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ - CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ - CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ - - CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */ - - /*!< Configure XTAL32M */ - POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ - POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ - CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ - SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ - ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ - - POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ - CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */ - - /*!< Set up PLL */ - CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ - POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ - POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); - const pll_setup_t pll0Setup = { - .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U), - .pllndec = SYSCON_PLL0NDEC_NDIV(4U), - .pllpdec = SYSCON_PLL0PDEC_PDIV(2U), - .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, - .pllRate = 100000000U, - .flags = PLL_SETUPFLAG_WAITLOCK - }; - CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ - - /*!< Set up dividers */ - CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */ - - /*< Set SystemCoreClock variable. */ - SystemCoreClock = 100000000U; -} - void board_init(void) { - // Enable IOCON clock - CLOCK_EnableClock(kCLOCK_Iocon); + BOARD_InitBootPins(); + BOARD_InitBootClocks(); + BOARD_InitBootPeripherals(); - // Init 100 MHz clock - BOARD_BootClockPLL100M(); + board_led_write(0); #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer @@ -155,54 +79,8 @@ void board_init(void) { NVIC_SetPriority(USB1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif - // Init all GPIO ports - GPIO_PortInit(GPIO, 0); - GPIO_PortInit(GPIO, 1); - - // LED - IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN); - gpio_pin_config_t const led_config = {kGPIO_DigitalOutput, 1}; - GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); - - board_led_write(0); - -#ifdef NEOPIXEL_PIN - // Neopixel - static uint32_t pixelData[NEOPIXEL_NUMBER]; - IOCON_PinMuxSet(IOCON, NEOPIXEL_PORT, NEOPIXEL_PIN, IOCON_PIO_DIG_FUNC4_EN); - - sctpix_init(NEOPIXEL_TYPE); - sctpix_addCh(NEOPIXEL_CH, pixelData, NEOPIXEL_NUMBER); - sctpix_setPixel(NEOPIXEL_CH, 0, 0x100010); - sctpix_setPixel(NEOPIXEL_CH, 1, 0x100010); - sctpix_show(); -#endif - - // Button - IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN); - gpio_pin_config_t const button_config = {kGPIO_DigitalInput, 0}; - GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); - -#ifdef UART_DEV - // UART - IOCON_PinMuxSet(IOCON, UART_RX_PINMUX); - IOCON_PinMuxSet(IOCON, UART_TX_PINMUX); - - // Enable UART when debug log is on - CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0); - usart_config_t uart_config; - USART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - USART_Init(UART_DEV, &uart_config, 12000000); -#endif - #if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 0) - /* PORT0 PIN22 configured as USB0_VBUS */ - IOCON_PinMuxSet(IOCON, 0U, 22U, IOCON_PIO_DIG_FUNC7_EN); // Port0 is Full Speed - NVIC_ClearPendingIRQ(USB0_IRQn); NVIC_ClearPendingIRQ(USB0_NEEDCLK_IRQn); @@ -227,13 +105,6 @@ void board_init(void) { /* enable USB Device clock */ CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); } else { - #ifdef USBFS_POWER_PORT - /* Configure USB0 Power Switch Pin */ - IOCON_PinMuxSet(IOCON, USBFS_POWER_PORT, USBFS_POWER_PIN, IOCON_PIO_DIG_FUNC0_EN); - - gpio_pin_config_t const power_pin_config = {kGPIO_DigitalOutput, USBFS_POWER_STATE_ON}; - GPIO_PinInit(GPIO, USBFS_POWER_PORT, USBFS_POWER_PIN, &power_pin_config); - #endif CLOCK_EnableUsbfs0HostClock(kCLOCK_UsbfsSrcPll1, 48000000U); USBFSH->PORTMODE &= ~USBFSH_PORTMODE_DEV_ENABLE_MASK; } @@ -262,13 +133,6 @@ void board_init(void) { /* enable USB Device clock */ CLOCK_EnableUsbhs0DeviceClock(kCLOCK_UsbSrcUnused, 0U); } else { - #ifdef USBHS_POWER_PORT - /* Configure USB1 Power Switch Pin */ - IOCON_PinMuxSet(IOCON, USBHS_POWER_PORT, USBHS_POWER_PIN, IOCON_PIO_DIG_FUNC0_EN); - - gpio_pin_config_t const power_pin_config = {kGPIO_DigitalOutput, USBHS_POWER_STATE_ON}; - GPIO_PinInit(GPIO, USBHS_POWER_PORT, USBHS_POWER_PIN, &power_pin_config); - #endif CLOCK_EnableUsbhs0HostClock(kCLOCK_UsbSrcUnused, 0U); } @@ -283,7 +147,7 @@ void board_init(void) { USBPHY->CTRL_SET = USBPHY_CTRL_SET_ENAUTOCLR_CLKGATE_MASK; USBPHY->CTRL_SET = USBPHY_CTRL_SET_ENAUTOCLR_PHY_PWD_MASK; - // PHY calibration values for LPCXPRESSO55S69 from mcux-sdk + // PHY Tx calibration USBPHY->TX = ((USBPHY->TX & (~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK))) | (USBPHY_TX_D_CAL(0x05U) | USBPHY_TX_TXCAL45DP(0x0AU) | USBPHY_TX_TXCAL45DM(0x0AU))); @@ -299,17 +163,6 @@ void board_init(void) { void board_led_write(bool state) { GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); - -#ifdef NEOPIXEL_PIN - if (state) { - sctpix_setPixel(NEOPIXEL_CH, 0, 0x100000); - sctpix_setPixel(NEOPIXEL_CH, 1, 0x101010); - } else { - sctpix_setPixel(NEOPIXEL_CH, 0, 0x001000); - sctpix_setPixel(NEOPIXEL_CH, 1, 0x000010); - } - sctpix_show(); -#endif } uint32_t board_button_read(void) { diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index a6f3bc167..2dc1c33f3 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -1,7 +1,7 @@ include_guard() set(MCUX_DIR ${TOP}/hw/mcu/nxp/mcuxsdk-core) -set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-devices-lpc) +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-devices-lpc/LPC5500) set(CMSIS_DIR ${TOP}/lib/CMSIS_6) # include board specific @@ -22,7 +22,7 @@ if (NOT DEFINED RHPORT_DEVICE) set(RHPORT_DEVICE 1) endif () if (NOT DEFINED RHPORT_HOST) - set(RHPORT_HOST 1) + set(RHPORT_HOST 0) endif () # port 0 is fullspeed, port 1 is highspeed @@ -41,38 +41,46 @@ cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_ # Startup & Linker script #------------------------------------ if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${SDK_DIR}/LPC5500/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + set(LD_FILE_GNU ${SDK_DIR}/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) endif () set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/LPC5500/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + set(STARTUP_FILE_GNU ${SDK_DIR}/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) endif () set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) if (NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${SDK_DIR}/LPC5500/${MCU_VARIANT}/iar/${MCU_CORE}_flash.icf) + set(LD_FILE_IAR ${SDK_DIR}/${MCU_VARIANT}/iar/${MCU_CORE}_flash.icf) endif () if (NOT DEFINED STARTUP_FILE_IAR) - set(STARTUP_FILE_IAR ${SDK_DIR}/LPC5500/${MCU_VARIANT}/iar/startup_${MCU_CORE}.s) + set(STARTUP_FILE_IAR ${SDK_DIR}/${MCU_VARIANT}/iar/startup_${MCU_CORE}.s) endif () #------------------------------------ # Board Target #------------------------------------ function(family_add_board BOARD_TARGET) + # Some variants (e.g. LPC55S28) share drivers with another variant (e.g. LPC55S69) + if (NOT DEFINED MCU_DRIVER_VARIANT) + set(MCU_DRIVER_VARIANT ${MCU_VARIANT}) + endif () + add_library(${BOARD_TARGET} STATIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/clock_config.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/pin_mux.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/peripherals.c # driver ${MCUX_DIR}/drivers/lpc_gpio/fsl_gpio.c ${MCUX_DIR}/drivers/common/fsl_common_arm.c ${MCUX_DIR}/drivers/flexcomm/fsl_flexcomm.c ${MCUX_DIR}/drivers/flexcomm/usart/fsl_usart.c # mcu - ${SDK_DIR}/LPC5500/${MCU_VARIANT}/system_${MCU_CORE}.c - ${SDK_DIR}/LPC5500/${MCU_VARIANT}/drivers/fsl_clock.c - ${SDK_DIR}/LPC5500/${MCU_VARIANT}/drivers/fsl_power.c - ${SDK_DIR}/LPC5500/${MCU_VARIANT}/drivers/fsl_reset.c + ${SDK_DIR}/${MCU_VARIANT}/system_${MCU_CORE}.c + ${SDK_DIR}/${MCU_DRIVER_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/${MCU_DRIVER_VARIANT}/drivers/fsl_power.c + ${SDK_DIR}/${MCU_DRIVER_VARIANT}/drivers/fsl_reset.c ) target_include_directories(${BOARD_TARGET} PUBLIC ${TOP}/lib/sct_neopixel @@ -84,9 +92,9 @@ function(family_add_board BOARD_TARGET) ${MCUX_DIR}/drivers/lpc_gpio ${MCUX_DIR}/drivers/sctimer # mcu - ${SDK_DIR}/LPC5500/${MCU_VARIANT} - ${SDK_DIR}/LPC5500/${MCU_VARIANT}/drivers - ${SDK_DIR}/LPC5500/periph + ${SDK_DIR}/${MCU_VARIANT} + ${SDK_DIR}/${MCU_DRIVER_VARIANT}/drivers + ${SDK_DIR}/periph ${CMSIS_DIR}/CMSIS/Core/Include ) target_compile_definitions(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index a7d06d70a..d33259bbf 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -5,24 +5,36 @@ CPU_CORE ?= cortex-m33 MCUX_DIR = hw/mcu/nxp/mcuxsdk-core SDK_DIR = hw/mcu/nxp/mcux-devices-lpc -# Default to Highspeed PORT1 -PORT ?= 1 +# Some variants (e.g. LPC55S28) share drivers with another variant (e.g. LPC55S69) +MCU_DRIVER_VARIANT ?= $(MCU_VARIANT) + +# Default device port to USB1 highspeed, host to USB0 fullspeed +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 CFLAGS += \ -flto \ -D__STARTUP_CLEAR_BSS \ -DCFG_TUSB_MCU=OPT_MCU_LPC55XX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' \ - -DBOARD_TUD_RHPORT=$(PORT) \ + -DBOARD_TUD_RHPORT=$(RHPORT_DEVICE) \ + -DBOARD_TUH_RHPORT=$(RHPORT_HOST) \ -ifeq ($(PORT), 1) - $(info "PORT1 High Speed") +# port 0 is fullspeed, port 1 is highspeed +ifeq ($(RHPORT_DEVICE), 1) CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + # Port1 controller can only access USB_SRAM + CFLAGS += -DCFG_TUD_MEM_SECTION='__attribute__((section("m_usb_global")))' +else + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED +endif - # LPC55 Highspeed Port1 can only write to USB_SRAM region - CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' +ifeq ($(RHPORT_HOST), 1) + CFLAGS += -DBOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED + CFLAGS += -DCFG_TUH_MEM_SECTION='__attribute__((section("m_usb_global")))' + CFLAGS += -DCFG_TUH_USBIP_IP3516=1 else - $(info "PORT0 Full Speed") + CFLAGS += -DBOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED endif # mcu driver cause following warnings @@ -40,9 +52,9 @@ LD_FILE ?= $(SDK_DIR)/LPC5500/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld SRC_C += \ $(TOP)/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_VARIANT)/system_$(MCU_CORE).c \ - $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_VARIANT)/drivers/fsl_clock.c \ - $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_VARIANT)/drivers/fsl_power.c \ - $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_VARIANT)/drivers/fsl_reset.c \ + $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_DRIVER_VARIANT)/drivers/fsl_clock.c \ + $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_DRIVER_VARIANT)/drivers/fsl_power.c \ + $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_DRIVER_VARIANT)/drivers/fsl_reset.c \ $(TOP)/$(MCUX_DIR)/drivers/lpc_gpio/fsl_gpio.c \ $(TOP)/$(MCUX_DIR)/drivers/common/fsl_common_arm.c \ $(TOP)/$(MCUX_DIR)/drivers/flexcomm/fsl_flexcomm.c \ @@ -54,7 +66,7 @@ INC += \ $(TOP)/lib/sct_neopixel \ $(TOP)/lib/CMSIS_6/CMSIS/Core/Include \ $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_VARIANT) \ - $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_VARIANT)/drivers \ + $(TOP)/$(SDK_DIR)/LPC5500/$(MCU_DRIVER_VARIANT)/drivers \ $(TOP)/$(SDK_DIR)/LPC5500/periph \ $(TOP)/$(MCUX_DIR)/drivers/common \ $(TOP)/$(MCUX_DIR)/drivers/flexcomm/usart \ |