Bunny brain board created, but not modified yet

Bunny brain board created, but not modified yet

7 files changed, 805 insertions, 0 deletions

diff --git a/hw/bsp/mcx/boards/bunny-brain/board.cmake b/hw/bsp/mcx/boards/bunny-brain/board.cmake
new file mode 100644
index 000000000..8c3280743
--- /dev/null
+++ b/hw/bsp/mcx/boards/bunny-brain/board.cmake
@@ -0,0 +1,21 @@
+set(MCU_VARIANT MCXN947)
+set(MCU_CORE MCXN947_cm33_core0)
+
+set(JLINK_DEVICE MCXN947_M33_0)
+set(PYOCD_TARGET MCXN947)
+set(NXPLINK_DEVICE MCXN947:MCXN947)
+
+set(PORT 1)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MCXN947VDF_cm33_core0
+    BOARD_TUD_RHPORT=${PORT}
+    # port 0 is fullspeed, port 1 is highspeed
+    BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    )
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c
+    )
+endfunction()
diff --git a/hw/bsp/mcx/boards/bunny-brain/board.h b/hw/bsp/mcx/boards/bunny-brain/board.h
new file mode 100644
index 000000000..eae98bfa7
--- /dev/null
+++ b/hw/bsp/mcx/boards/bunny-brain/board.h
@@ -0,0 +1,66 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_GPIO              GPIO3
+#define LED_CLK               kCLOCK_Gpio3
+#define LED_PIN               4 // red
+#define LED_STATE_ON          0
+
+// WAKE button (Dummy, use unused pin
+#define BUTTON_GPIO           GPIO0
+#define BUTTON_CLK            kCLOCK_Gpio0
+#define BUTTON_PIN            6
+#define BUTTON_STATE_ACTIVE   0
+
+// UART
+#define UART_DEV              LPUART4
+
+static inline void board_uart_init_clock(void) {
+  /* attach FRO 12M to FLEXCOMM4 */
+  CLOCK_SetClkDiv(kCLOCK_DivFlexcom4Clk, 1u);
+  CLOCK_AttachClk(kFRO12M_to_FLEXCOMM4);
+  RESET_ClearPeripheralReset(kFC4_RST_SHIFT_RSTn);
+}
+
+//#define UART_RX_PINMUX        0, 24, IOCON_PIO_DIG_FUNC1_EN
+//#define UART_TX_PINMUX        0, 25, IOCON_PIO_DIG_FUNC1_EN
+
+// XTAL
+#define XTAL0_CLK_HZ          (24 * 1000 * 1000U)
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif
diff --git a/hw/bsp/mcx/boards/bunny-brain/board.mk b/hw/bsp/mcx/boards/bunny-brain/board.mk
new file mode 100644
index 000000000..aaad5e73e
--- /dev/null
+++ b/hw/bsp/mcx/boards/bunny-brain/board.mk
@@ -0,0 +1,11 @@
+MCU_VARIANT = MCXN947
+MCU_CORE = MCXN947_cm33_core0
+PORT ?= 1
+
+CFLAGS += -DCPU_MCXN947VDF_cm33_core0
+
+JLINK_DEVICE = MCXN947_M33_0
+PYOCD_TARGET = MCXN947
+
+# flash using pyocd
+flash: flash-jlink
diff --git a/hw/bsp/mcx/boards/bunny-brain/clock_config.c b/hw/bsp/mcx/boards/bunny-brain/clock_config.c
new file mode 100644
index 000000000..37d2b4dfc
--- /dev/null
+++ b/hw/bsp/mcx/boards/bunny-brain/clock_config.c
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Setup clock sources.
+ *
+ * 2. Set up wait states of the flash.
+ *
+ * 3. Set up all dividers.
+ *
+ * 4. Set up all selectors to provide selected clocks.
+ *
+ */
+
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v10.0
+processor: MCXN947
+package_id: MCXN947VDF
+mcu_data: ksdk2_0
+processor_version: 0.12.3
+board: MCX-N9XX-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+#include "clock_config.h"
+#include "fsl_clock.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+/* System clock frequency. */
+// extern uint32_t SystemCoreClock;
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockPLL150M();
+}
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO12M **********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFRO12M
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: MAIN_clock.outFreq, value: 12 MHz}
+- {id: Slow_clock.outFreq, value: 3 MHz}
+- {id: System_clock.outFreq, value: 12 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: SCGMode, value: SIRC}
+- {id: SCG.SCSSEL.sel, value: SCG.SIRC}
+- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+void BOARD_BootClockFRO12M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kFRO12M_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to FRO12M */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U);           /*!< Set AHBCLKDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK;
+}
+
+/*******************************************************************************
+ ******************* Configuration BOARD_BootClockFROHF48M *********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFROHF48M
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_clock.outFreq, value: 48 MHz}
+- {id: MAIN_clock.outFreq, value: 48 MHz}
+- {id: Slow_clock.outFreq, value: 12 MHz}
+- {id: System_clock.outFreq, value: 48 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: SYSCON.FLEXCAN0CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FLEXCAN1CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFROHF48M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFROHF48M configuration
+ ******************************************************************************/
+void BOARD_BootClockFROHF48M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    CLOCK_SetupFROHFClocking(48000000U);                /*!< Enable FRO HF(48MHz) output */
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to FRO_HF */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U);           /*!< Set AHBCLKDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFROHF48M_CORE_CLOCK;
+}
+
+/*******************************************************************************
+ ******************* Configuration BOARD_BootClockFROHF144M ********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFROHF144M
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_clock.outFreq, value: 144 MHz}
+- {id: MAIN_clock.outFreq, value: 144 MHz}
+- {id: Slow_clock.outFreq, value: 18 MHz}
+- {id: System_clock.outFreq, value: 72 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: SYSCON.AHBCLKDIV.scale, value: '2', locked: true}
+- {id: SYSCON.FLEXCAN0CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FLEXCAN1CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+sources:
+- {id: SCG.FIRC.outFreq, value: 144 MHz}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFROHF144M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFROHF144M configuration
+ ******************************************************************************/
+void BOARD_BootClockFROHF144M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    CLOCK_SetupFROHFClocking(144000000U);               /*!< Enable FRO HF(144MHz) output */
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to FRO_HF */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 2U);           /*!< Set AHBCLKDIV divider to value 2 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFROHF144M_CORE_CLOCK;
+}
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockPLL150M *********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockPLL150M
+called_from_default_init: true
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_clock.outFreq, value: 48 MHz}
+- {id: MAIN_clock.outFreq, value: 150 MHz}
+- {id: PLL0_CLK_clock.outFreq, value: 150 MHz}
+- {id: Slow_clock.outFreq, value: 37.5 MHz}
+- {id: System_clock.outFreq, value: 150 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: PLL0_Mode, value: Normal}
+- {id: RunPowerMode, value: OD}
+- {id: SCGMode, value: PLL0}
+- {id: SCG.PLL0M_MULT.scale, value: '50', locked: true}
+- {id: SCG.PLL0SRCSEL.sel, value: SCG.FIRC_48M}
+- {id: SCG.PLL0_NDIV.scale, value: '8', locked: true}
+- {id: SCG.SCSSEL.sel, value: SCG.PLL0_CLK}
+- {id: SYSCON.FLEXCAN0CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FLEXCAN1CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockPLL150M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockPLL150M configuration
+ ******************************************************************************/
+void BOARD_BootClockPLL150M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    CLOCK_SetupFROHFClocking(48000000U);                /*!< Enable FRO HF(48MHz) output */
+
+    /*!< Set up PLL0 */
+    const pll_setup_t pll0Setup = {
+        .pllctrl = SCG_APLLCTRL_SOURCE(1U) | SCG_APLLCTRL_SELI(27U) | SCG_APLLCTRL_SELP(13U),
+        .pllndiv = SCG_APLLNDIV_NDIV(8U),
+        .pllpdiv = SCG_APLLPDIV_PDIV(1U),
+        .pllmdiv = SCG_APLLMDIV_MDIV(50U),
+        .pllRate = 150000000U
+    };
+    CLOCK_SetPLL0Freq(&pll0Setup);                       /*!< Configure PLL0 to the desired values */
+    CLOCK_SetPll0MonitorMode(kSCG_Pll0MonitorDisable);    /* Pll0 Monitor is disabled */
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kPLL0_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to PLL0 */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U);           /*!< Set AHBCLKDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK;
+}
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockPLL100M *********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockPLL100M
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: CLK_IN_clock.outFreq, value: 24 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: MAIN_clock.outFreq, value: 100 MHz}
+- {id: PLL1_CLK_clock.outFreq, value: 100 MHz}
+- {id: Slow_clock.outFreq, value: 25 MHz}
+- {id: System_clock.outFreq, value: 100 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: PLL1_Mode, value: Normal}
+- {id: SCGMode, value: PLL1}
+- {id: SCG.PLL1M_MULT.scale, value: '100', locked: true}
+- {id: SCG.PLL1_NDIV.scale, value: '6', locked: true}
+- {id: SCG.PLL1_PDIV.scale, value: '4', locked: true}
+- {id: SCG.SCSSEL.sel, value: SCG.PLL1_CLK}
+- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled}
+- {id: SCG_SOSCCSR_SOSCEN_CFG, value: Enabled}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+sources:
+- {id: SCG.SOSC.outFreq, value: 24 MHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockPLL100M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockPLL100M configuration
+ ******************************************************************************/
+void BOARD_BootClockPLL100M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    CLOCK_SetupExtClocking(24000000U);
+    CLOCK_SetSysOscMonitorMode(kSCG_SysOscMonitorDisable);    /* System OSC Clock Monitor is disabled */
+
+    /*!< Set up PLL1 */
+    const pll_setup_t pll1Setup = {
+        .pllctrl = SCG_SPLLCTRL_SOURCE(0U) | SCG_SPLLCTRL_SELI(53U) | SCG_SPLLCTRL_SELP(26U),
+        .pllndiv = SCG_SPLLNDIV_NDIV(6U),
+        .pllpdiv = SCG_SPLLPDIV_PDIV(2U),
+        .pllmdiv = SCG_SPLLMDIV_MDIV(100U),
+        .pllRate = 100000000U
+    };
+    CLOCK_SetPLL1Freq(&pll1Setup);                       /*!< Configure PLL1 to the desired values */
+    CLOCK_SetPll1MonitorMode(kSCG_Pll1MonitorDisable);    /* Pll1 Monitor is disabled */
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kPLL1_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to PLL1 */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U);           /*!< Set AHBCLKDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK;
+}
diff --git a/hw/bsp/mcx/boards/bunny-brain/clock_config.h b/hw/bsp/mcx/boards/bunny-brain/clock_config.h
new file mode 100644
index 000000000..c238a0423
--- /dev/null
+++ b/hw/bsp/mcx/boards/bunny-brain/clock_config.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal frequency in Hz */
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32K frequency in Hz */
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO12M **********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK           12000000U  /*!< Core clock frequency: 12000000Hz */
+#define BOARD_BOOTCLOCKFRO12M_ROSC_CLOCK                  0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFRO12M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************* Configuration BOARD_BootClockFROHF48M *********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFROHF48M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFROHF48M_CORE_CLOCK         48000000U  /*!< Core clock frequency: 48000000Hz */
+#define BOARD_BOOTCLOCKFROHF48M_ROSC_CLOCK                0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFROHF48M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFROHF48M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************* Configuration BOARD_BootClockFROHF144M ********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFROHF144M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFROHF144M_CORE_CLOCK       144000000U  /*!< Core clock frequency: 144000000Hz */
+#define BOARD_BOOTCLOCKFROHF144M_ROSC_CLOCK               0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFROHF144M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFROHF144M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockPLL150M *********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockPLL150M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK         150000000U  /*!< Core clock frequency: 150000000Hz */
+#define BOARD_BOOTCLOCKPLL150M_ROSC_CLOCK                 0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockPLL150M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockPLL150M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockPLL100M *********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockPLL100M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK         100000000U  /*!< Core clock frequency: 100000000Hz */
+#define BOARD_BOOTCLOCKPLL100M_ROSC_CLOCK                 0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockPLL100M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockPLL100M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/mcx/boards/bunny-brain/pin_mux.c b/hw/bsp/mcx/boards/bunny-brain/pin_mux.c
new file mode 100644
index 000000000..acc2f3e45
--- /dev/null
+++ b/hw/bsp/mcx/boards/bunny-brain/pin_mux.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v12.0
+processor: MCXN947
+package_id: MCXN947VDF
+mcu_data: ksdk2_0
+processor_version: 0.12.3
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+#include "fsl_common.h"
+#include "fsl_port.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void)
+{
+    BOARD_InitPins();
+}
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: A1, peripheral: LPFlexcomm4, signal: LPFLEXCOMM_P0, pin_signal: PIO1_8/WUU0_IN10/LPTMR1_ALT3/TRACE_DATA0/FC4_P0/FC5_P4/CT_INP8/SCT0_OUT2/FLEXIO0_D16/PLU_OUT0/ENET0_TXD2/I3C1_SDA/TSI0_CH17/ADC1_A8,
+    slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, passive_filter: disable, pull_value: low, input_buffer: enable,
+    invert_input: normal}
+  - {pin_num: B1, peripheral: LPFlexcomm4, signal: LPFLEXCOMM_P1, pin_signal: PIO1_9/TRACE_DATA1/FC4_P1/FC5_P5/CT_INP9/SCT0_OUT3/FLEXIO0_D17/PLU_OUT1/ENET0_TXD3/I3C1_SCL/TSI0_CH18/ADC1_A9,
+    slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, passive_filter: disable, input_buffer: enable, invert_input: normal}
+  - {pin_num: F14, peripheral: GPIO3, signal: 'GPIO, 4', pin_signal: PIO3_4/FC7_P2/CT_INP18/PWM0_X2/FLEXIO0_D12/SIM1_CLK, slew_rate: fast, open_drain: disable, drive_strength: low,
+    pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void)
+{
+    /* Enables the clock for PORT1: Enables clock */
+    CLOCK_EnableClock(kCLOCK_Port1);
+    /* Enables the clock for PORT3: Enables clock */
+    CLOCK_EnableClock(kCLOCK_Port3);
+
+    const port_pin_config_t port1_8_pinA1_config = {/* Internal pull-up/down resistor is disabled */
+                                                    kPORT_PullDisable,
+                                                    /* Low internal pull resistor value is selected. */
+                                                    kPORT_LowPullResistor,
+                                                    /* Fast slew rate is configured */
+                                                    kPORT_FastSlewRate,
+                                                    /* Passive input filter is disabled */
+                                                    kPORT_PassiveFilterDisable,
+                                                    /* Open drain output is disabled */
+                                                    kPORT_OpenDrainDisable,
+                                                    /* Low drive strength is configured */
+                                                    kPORT_LowDriveStrength,
+                                                    /* Pin is configured as FC4_P0 */
+                                                    kPORT_MuxAlt2,
+                                                    /* Digital input enabled */
+                                                    kPORT_InputBufferEnable,
+                                                    /* Digital input is not inverted */
+                                                    kPORT_InputNormal,
+                                                    /* Pin Control Register fields [15:0] are not locked */
+                                                    kPORT_UnlockRegister};
+    /* PORT1_8 (pin A1) is configured as FC4_P0 */
+    PORT_SetPinConfig(PORT1, 8U, &port1_8_pinA1_config);
+
+    const port_pin_config_t port1_9_pinB1_config = {/* Internal pull-up/down resistor is disabled */
+                                                    kPORT_PullDisable,
+                                                    /* Low internal pull resistor value is selected. */
+                                                    kPORT_LowPullResistor,
+                                                    /* Fast slew rate is configured */
+                                                    kPORT_FastSlewRate,
+                                                    /* Passive input filter is disabled */
+                                                    kPORT_PassiveFilterDisable,
+                                                    /* Open drain output is disabled */
+                                                    kPORT_OpenDrainDisable,
+                                                    /* Low drive strength is configured */
+                                                    kPORT_LowDriveStrength,
+                                                    /* Pin is configured as FC4_P1 */
+                                                    kPORT_MuxAlt2,
+                                                    /* Digital input enabled */
+                                                    kPORT_InputBufferEnable,
+                                                    /* Digital input is not inverted */
+                                                    kPORT_InputNormal,
+                                                    /* Pin Control Register fields [15:0] are not locked */
+                                                    kPORT_UnlockRegister};
+    /* PORT1_9 (pin B1) is configured as FC4_P1 */
+    PORT_SetPinConfig(PORT1, 9U, &port1_9_pinB1_config);
+
+    const port_pin_config_t port3_4_pinF14_config = {/* Internal pull-up/down resistor is disabled */
+                                                     kPORT_PullDisable,
+                                                     /* Low internal pull resistor value is selected. */
+                                                     kPORT_LowPullResistor,
+                                                     /* Fast slew rate is configured */
+                                                     kPORT_FastSlewRate,
+                                                     /* Passive input filter is disabled */
+                                                     kPORT_PassiveFilterDisable,
+                                                     /* Open drain output is disabled */
+                                                     kPORT_OpenDrainDisable,
+                                                     /* Low drive strength is configured */
+                                                     kPORT_LowDriveStrength,
+                                                     /* Pin is configured as PIO3_4 */
+                                                     kPORT_MuxAlt0,
+                                                     /* Digital input enabled */
+                                                     kPORT_InputBufferEnable,
+                                                     /* Digital input is not inverted */
+                                                     kPORT_InputNormal,
+                                                     /* Pin Control Register fields [15:0] are not locked */
+                                                     kPORT_UnlockRegister};
+    /* PORT3_4 (pin F14) is configured as PIO3_4 */
+    PORT_SetPinConfig(PORT3, 4U, &port3_4_pinF14_config);
+}
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/mcx/boards/bunny-brain/pin_mux.h b/hw/bsp/mcx/boards/bunny-brain/pin_mux.h
new file mode 100644
index 000000000..40968c275
--- /dev/null
+++ b/hw/bsp/mcx/boards/bunny-brain/pin_mux.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/