Merge branch 'master' into MCX

17 files changed, 250 insertions, 136 deletions

diff --git a/.github/workflows/labeler.yml b/.github/workflows/labeler.yml
index 4733c6f06..947b08ca2 100644
--- a/.github/workflows/labeler.yml
+++ b/.github/workflows/labeler.yml
@@ -28,29 +28,31 @@ jobs:
               issueOrPrNumber = context.payload.pull_request.number;
             }
 
-            // Check for Adafruit membership
-            const adafruitResponse = await github.rest.orgs.checkMembershipForUser({
-              org: 'adafruit',
-              username: username
-            });
-
-            if (adafruitResponse.status === 204) {
-              console.log('Adafruit Member');
-              label = 'Prio Urgent';
-            } else {
-              // Check if the user is a contributor
-              const collaboratorResponse = await github.rest.repos.checkCollaborator({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
+            try {
+              // Check for Adafruit membership
+              const adafruitResponse = await github.rest.orgs.checkMembershipForUser({
+                org: 'adafruit',
                 username: username
               });
 
-              if (collaboratorResponse.status === 204) {
-                console.log('Contributor');
-                label = 'Prio Higher';
+              if (adafruitResponse.status === 204) {
+                console.log('Adafruit Member');
+                label = 'Prio Urgent';
               } else {
-                console.log('Not a contributor or Adafruit member');
+                // If not a Adafruit member, check if the user is a contributor
+                const collaboratorResponse = await github.rest.repos.checkCollaborator({
+                  owner: context.repo.owner,
+                  repo: context.repo.repo,
+                  username: username
+                });
+
+                if (collaboratorResponse.status === 204) {
+                  console.log('Contributor');
+                  label = 'Prio Higher';
+                }
               }
+            } catch (error) {
+              console.log(`Error processing user ${username}: ${error.message}`);
             }
 
             if (label !== '') {
diff --git a/examples/build_system/make/make.mk b/examples/build_system/make/make.mk
index e1113aa52..772befca4 100644
--- a/examples/build_system/make/make.mk
+++ b/examples/build_system/make/make.mk
@@ -113,6 +113,7 @@ CFLAGS += -DBOARD_$(BOARD_UPPER)
 ifeq (${MAX3421_HOST},1)
   SRC_C += src/portable/analog/max3421/hcd_max3421.c
   CFLAGS += -DCFG_TUH_MAX3421=1
+  CMAKE_DEFSYM +=	-DMAX3421_HOST=1
 endif
 
 # Log level is mapped to TUSB DEBUG option
diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c
index 0ab72b2f3..35b7ac94b 100644
--- a/examples/device/uac2_headset/src/main.c
+++ b/examples/device/uac2_headset/src/main.c
@@ -96,6 +96,7 @@ uint8_t current_resolution;
 
 void led_blinking_task(void);
 void audio_task(void);
+void audio_control_task(void);
 
 /*------------- MAIN -------------*/
 int main(void)
@@ -115,6 +116,7 @@ int main(void)
   {
     tud_task(); // TinyUSB device task
     audio_task();
+    audio_control_task();
     led_blinking_task();
   }
 }
@@ -428,6 +430,45 @@ void audio_task(void)
   }
 }
 
+void audio_control_task(void)
+{
+  // Press on-board button to control volume
+  // Open host volume control, volume should switch between 10% and 100%
+
+  // Poll every 50ms
+  const uint32_t interval_ms = 50;
+  static uint32_t start_ms = 0;
+  static uint32_t btn_prev = 0;
+
+  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  uint32_t btn = board_button_read();
+
+  if (!btn_prev && btn)
+  {
+    // Adjust volume between 0dB (100%) and -30dB (10%)
+    for (int i = 0; i < CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1; i++)
+    {
+      volume[i] = volume[i] == 0 ? -VOLUME_CTRL_30_DB : 0;
+    }
+
+    // 6.1 Interrupt Data Message
+    const audio_interrupt_data_t data = {
+      .bInfo = 0,                                       // Class-specific interrupt, originated from an interface
+      .bAttribute = AUDIO_CS_REQ_CUR,                   // Caused by current settings
+      .wValue_cn_or_mcn = 0,                            // CH0: master volume
+      .wValue_cs = AUDIO_FU_CTRL_VOLUME,                // Volume change
+      .wIndex_ep_or_int = 0,                            // From the interface itself
+      .wIndex_entity_id = UAC2_ENTITY_SPK_FEATURE_UNIT, // From feature unit
+    };
+
+    tud_audio_int_write(&data);
+  }
+
+  btn_prev = btn;
+}
+
 //--------------------------------------------------------------------+
 // BLINKING TASK
 //--------------------------------------------------------------------+
diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h
index b770483dc..4b08fa676 100644
--- a/examples/device/uac2_headset/src/tusb_config.h
+++ b/examples/device/uac2_headset/src/tusb_config.h
@@ -105,6 +105,9 @@ extern "C" {
 // AUDIO CLASS DRIVER CONFIGURATION
 //--------------------------------------------------------------------
 
+// Allow volume controlled by on-baord button
+#define CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP                            1
+
 #define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                                TUD_AUDIO_HEADSET_STEREO_DESC_LEN
 
 // How many formats are used, need to adjust USB descriptor if changed
diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c
index 6d1e6a23f..ff4dc2acc 100644
--- a/examples/device/uac2_headset/src/usb_descriptors.c
+++ b/examples/device/uac2_headset/src/usb_descriptors.c
@@ -82,27 +82,32 @@ uint8_t const * tud_descriptor_device_cb(void)
   // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
   #define EPNUM_AUDIO_IN    0x03
   #define EPNUM_AUDIO_OUT   0x03
+  #define EPNUM_AUDIO_INT   0x01
 
 #elif CFG_TUSB_MCU == OPT_MCU_NRF5X
   // ISO endpoints for NRF5x are fixed to 0x08 (0x88)
   #define EPNUM_AUDIO_IN    0x08
   #define EPNUM_AUDIO_OUT   0x08
+  #define EPNUM_AUDIO_INT   0x01
 
 #elif CFG_TUSB_MCU == OPT_MCU_SAMG  || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
   // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
   //    e.g EP1 OUT & EP1 IN cannot exist together
   #define EPNUM_AUDIO_IN    0x01
   #define EPNUM_AUDIO_OUT   0x02
+  #define EPNUM_AUDIO_INT   0x03
 
 #elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X
   // FT9XX doesn't support a same endpoint number with different direction IN and OUT
   //    e.g EP1 OUT & EP1 IN cannot exist together
   #define EPNUM_AUDIO_IN    0x01
   #define EPNUM_AUDIO_OUT   0x02
+  #define EPNUM_AUDIO_INT   0x03
 
 #else
   #define EPNUM_AUDIO_IN    0x01
   #define EPNUM_AUDIO_OUT   0x01
+  #define EPNUM_AUDIO_INT   0x02
 #endif
 
 uint8_t const desc_configuration[] =
@@ -111,7 +116,7 @@ uint8_t const desc_configuration[] =
     TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
 
     // Interface number, string index, EP Out & EP In address, EP size
-    TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80)
+    TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80, EPNUM_AUDIO_INT | 0x80)
 };
 
 // Invoked when received GET CONFIGURATION DESCRIPTOR
diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h
index d7e170162..da0da83e8 100644
--- a/examples/device/uac2_headset/src/usb_descriptors.h
+++ b/examples/device/uac2_headset/src/usb_descriptors.h
@@ -55,6 +55,7 @@ enum
     + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\
     + TUD_AUDIO_DESC_INPUT_TERM_LEN\
     + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\
+    + TUD_AUDIO_DESC_STD_AC_INT_EP_LEN\
     /* Interface 1, Alternate 0 */\
     + TUD_AUDIO_DESC_STD_AS_INT_LEN\
     /* Interface 1, Alternate 1 */\
@@ -84,11 +85,11 @@ enum
     + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\
     + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN)
 
-#define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin) \
+#define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin, _epint) \
     /* Standard Interface Association Descriptor (IAD) */\
     TUD_AUDIO_DESC_IAD(/*_firstitf*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\
     /* Standard AC Interface Descriptor(4.7.1) */\
-    TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\
+    TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\
     /* Class-Specific AC Interface Header Descriptor(4.7.2) */\
     TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\
     /* Clock Source Descriptor(4.7.2.1) */\
@@ -103,6 +104,8 @@ enum
     TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\
     /* Output Terminal Descriptor(4.7.2.5) */\
     TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\
+    /* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */\
+    TUD_AUDIO_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \
     /* Standard AS Interface Descriptor(4.9.1) */\
     /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\
     TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\
@@ -114,7 +117,7 @@ enum
     /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
     TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\
     /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\
+    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\
     /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
     TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\
     /* Interface 1, Alternate 2 - alternate interface for data streaming */\
@@ -124,7 +127,7 @@ enum
     /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
     TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\
     /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\
+    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\
     /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
     TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\
     /* Standard AS Interface Descriptor(4.9.1) */\
@@ -138,7 +141,7 @@ enum
     /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
     TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\
     /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\
+    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\
     /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
     TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\
     /* Interface 2, Alternate 2 - alternate interface for data streaming */\
@@ -148,7 +151,7 @@ enum
     /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
     TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\
     /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\
+    TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\
     /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
     TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
diff --git a/examples/host/cdc_msc_hid_freertos/skip.txt b/examples/host/cdc_msc_hid_freertos/skip.txt
new file mode 100644
index 000000000..2ba4438fd
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/skip.txt
@@ -0,0 +1 @@
+mcu:RP2040
diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake
index d84077ed8..4ccd6e4f2 100644
--- a/hw/bsp/family_support.cmake
+++ b/hw/bsp/family_support.cmake
@@ -79,48 +79,37 @@ set(WARNING_FLAGS_IAR "")
 function(family_filter RESULT DIR)
   get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR})
 
-  if (EXISTS "${DIR}/only.txt")
-    file(READ "${DIR}/only.txt" ONLYS)
-    # Replace newlines with semicolon so that it is treated as a list by CMake
-    string(REPLACE "\n" ";" ONLYS_LINES ${ONLYS})
-
-    # For each mcu
+  if (EXISTS "${DIR}/skip.txt")
+    file(STRINGS "${DIR}/skip.txt" SKIPS_LINES)
     foreach(MCU IN LISTS FAMILY_MCUS)
       # For each line in only.txt
-      foreach(_line ${ONLYS_LINES})
-        # If mcu:xxx exists for this mcu or board:xxx then include
-        if (${_line} STREQUAL "mcu:${MCU}" OR ${_line} STREQUAL "board:${BOARD}")
-          set(${RESULT} 1 PARENT_SCOPE)
+      foreach(_line ${SKIPS_LINES})
+        # If mcu:xxx exists for this mcu then skip
+        if (${_line} STREQUAL "mcu:${MCU}" OR ${_line} STREQUAL "board:${BOARD}" OR ${_line} STREQUAL "family:${FAMILY}")
+          set(${RESULT} 0 PARENT_SCOPE)
           return()
         endif()
       endforeach()
     endforeach()
+  endif ()
 
-    # Didn't find it in only file so don't build
-    set(${RESULT} 0 PARENT_SCOPE)
-
-  elseif (EXISTS "${DIR}/skip.txt")
-    file(READ "${DIR}/skip.txt" SKIPS)
-    # Replace newlines with semicolon so that it is treated as a list by CMake
-    string(REPLACE "\n" ";" SKIPS_LINES ${SKIPS})
-
-    # For each mcu
+  if (EXISTS "${DIR}/only.txt")
+    file(STRINGS "${DIR}/only.txt" ONLYS_LINES)
     foreach(MCU IN LISTS FAMILY_MCUS)
       # For each line in only.txt
-      foreach(_line ${SKIPS_LINES})
-        # If mcu:xxx exists for this mcu then skip
-        if (${_line} STREQUAL "mcu:${MCU}")
-          set(${RESULT} 0 PARENT_SCOPE)
+      foreach(_line ${ONLYS_LINES})
+        # If mcu:xxx exists for this mcu or board:xxx then include
+        if (${_line} STREQUAL "mcu:${MCU}" OR ${_line} STREQUAL "board:${BOARD}" OR ${_line} STREQUAL "family:${FAMILY}")
+          set(${RESULT} 1 PARENT_SCOPE)
           return()
         endif()
       endforeach()
     endforeach()
 
-    # Didn't find in skip file so build
-    set(${RESULT} 1 PARENT_SCOPE)
+    # Didn't find it in only file so don't build
+    set(${RESULT} 0 PARENT_SCOPE)
   else()
-
-    # Didn't find skip or only file so build
+    # only.txt not exist so build
     set(${RESULT} 1 PARENT_SCOPE)
   endif()
 endfunction()
diff --git a/hw/bsp/rp2040/boards/feather_rp2040_max3421/board.cmake b/hw/bsp/rp2040/boards/feather_rp2040_max3421/board.cmake
new file mode 100644
index 000000000..b8e5890f3
--- /dev/null
+++ b/hw/bsp/rp2040/boards/feather_rp2040_max3421/board.cmake
@@ -0,0 +1,4 @@
+set(PICO_BOARD adafruit_feather_rp2040)
+
+# Enable MAX3421E USB Host
+set(MAX3421_HOST 1)
diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h
index 70d431282..d6f3e22e2 100644
--- a/src/class/audio/audio.h
+++ b/src/class/audio/audio.h
@@ -924,6 +924,31 @@ typedef struct TU_ATTR_PACKED {
     } subrange[numSubRanges];                   \
 }
 
+// 6.1 Interrupt Data Message Format
+typedef struct TU_ATTR_PACKED
+{
+  uint8_t bInfo;
+  uint8_t bAttribute;
+  union
+  {
+    uint16_t wValue;
+    struct
+    {
+      uint8_t wValue_cn_or_mcn;
+      uint8_t wValue_cs;
+    };
+  };
+  union
+  {
+    uint16_t wIndex;
+    struct
+    {
+      uint8_t wIndex_ep_or_int;
+      uint8_t wIndex_entity_id;
+    };
+  };
+} audio_interrupt_data_t;
+
 /** @} */
 
 #ifdef __cplusplus
diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c
index 293defd96..9a361419b 100644
--- a/src/class/audio/audio_device.c
+++ b/src/class/audio/audio_device.c
@@ -301,10 +301,12 @@ typedef struct
 
 #endif
 
-#if CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
-  uint8_t ep_int_ctr;           // Audio control interrupt EP.
+#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
+  uint8_t ep_int;               // Audio control interrupt EP.
 #endif
 
+  bool mounted;                 // Device opened
+
   /*------------- From this point, data is not cleared by bus reset -------------*/
 
   uint16_t desc_length;         // Length of audio function descriptor
@@ -358,8 +360,8 @@ typedef struct
 #endif
 
   // Audio control interrupt buffer - no FIFO - 6 Bytes according to UAC 2 specification (p. 74)
-#if CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
-  CFG_TUSB_MEM_ALIGN uint8_t ep_int_ctr_buf[CFG_TUD_AUDIO_INT_CTR_EP_IN_SW_BUFFER_SIZE];
+#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
+  CFG_TUSB_MEM_ALIGN uint8_t ep_int_buf[6];
 #endif
 
   // Decoding parameters - parameters are set when alternate AS interface is set by host
@@ -486,23 +488,7 @@ bool tud_audio_n_mounted(uint8_t func_id)
   TU_VERIFY(func_id < CFG_TUD_AUDIO);
   audiod_function_t* audio = &_audiod_fct[func_id];
 
-#if CFG_TUD_AUDIO_ENABLE_EP_OUT
-  if (audio->ep_out == 0) return false;
-#endif
-
-#if CFG_TUD_AUDIO_ENABLE_EP_IN
-  if (audio->ep_in == 0) return false;
-#endif
-
-#if CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
-  if (audio->ep_int_ctr == 0) return false;
-#endif
-
-#if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP
-  if (audio->ep_fb == 0) return false;
-#endif
-
-  return true;
+  return audio->mounted;
 }
 
 //--------------------------------------------------------------------+
@@ -825,24 +811,30 @@ tu_fifo_t* tud_audio_n_get_tx_support_ff(uint8_t func_id, uint8_t ff_idx)
 #endif
 
 
-#if CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
-
-// If no interrupt transmit is pending bytes get written into buffer and a transmit is scheduled - once transmit completed tud_audio_int_ctr_done_cb() is called in inform user
-uint16_t tud_audio_int_ctr_n_write(uint8_t func_id, uint8_t const* buffer, uint16_t len)
+#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
+// If no interrupt transmit is pending bytes get written into buffer and a transmit is scheduled - once transmit completed tud_audio_int_done_cb() is called in inform user
+bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t * data)
 {
   TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL);
 
-  // We write directly into the EP's buffer - abort if previous transfer not complete
-  TU_VERIFY(!usbd_edpt_busy(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int_ctr));
+  TU_VERIFY(_audiod_fct[func_id].ep_int != 0);
 
-  TU_VERIFY(tu_memcpy_s(_audiod_fct[func_id].ep_int_ctr_buf, CFG_TUD_AUDIO_INT_CTR_EP_IN_SW_BUFFER_SIZE,  buffer, len)==0);
+  // We write directly into the EP's buffer - abort if previous transfer not complete
+  TU_VERIFY(usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int));
 
-  // Schedule transmit
-  TU_VERIFY(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int_ctr, _audiod_fct[func_id].ep_int_ctr_buf, len));
+  // Check length
+  if (tu_memcpy_s(_audiod_fct[func_id].ep_int_buf, sizeof(_audiod_fct[func_id].ep_int_buf),  data, sizeof(audio_interrupt_data_t)) == 0)
+  {
+    // Schedule transmit
+    TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, _audiod_fct[func_id].ep_int_buf, sizeof(_audiod_fct[func_id].ep_int_buf)), 0);
+  } else
+  {
+    // Release endpoint since we don't make any transfer
+    usbd_edpt_release(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int);
+  }
 
   return true;
 }
-
 #endif
 
 // This function is called once a transmit of an audio packet was successfully completed. Here, we encode samples and place it in IN EP's buffer for next transmission.
@@ -1447,10 +1439,11 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin
   // Verify version is correct - this check can be omitted
   TU_VERIFY(itf_desc->bInterfaceProtocol == AUDIO_INT_PROTOCOL_CODE_V2);
 
-  // Verify interrupt control EP is enabled if demanded by descriptor - this should be best some static check however - this check can be omitted
-  if (itf_desc->bNumEndpoints == 1) // 0 or 1 EPs are allowed
+  // Verify interrupt control EP is enabled if demanded by descriptor
+  TU_ASSERT(itf_desc->bNumEndpoints <= 1); // 0 or 1 EPs are allowed
+  if (itf_desc->bNumEndpoints == 1)
   {
-    TU_VERIFY(CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN > 0);
+    TU_ASSERT(CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP);
   }
 
   // Alternate setting MUST be zero - this check can be omitted
@@ -1594,6 +1587,32 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin
       }
 #endif // CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL
 
+#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
+      {
+        uint8_t const *p_desc = _audiod_fct[i].p_desc;
+        uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN;
+        // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning
+        while (p_desc_end - p_desc > 0)
+        {
+          // For each endpoint
+          if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT)
+          {
+            tusb_desc_endpoint_t const* desc_ep = (tusb_desc_endpoint_t const *) p_desc;
+            uint8_t const ep_addr = desc_ep->bEndpointAddress;
+            // If endpoint is input-direction and interrupt-type
+            if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && desc_ep->bmAttributes.xfer == TUSB_XFER_INTERRUPT)
+            {
+              // Store endpoint number and open endpoint
+              _audiod_fct[i].ep_int = ep_addr;
+              TU_ASSERT(usbd_edpt_open(_audiod_fct[i].rhport, desc_ep));
+            }
+          }
+          p_desc = tu_desc_next(p_desc);
+        }
+      }
+#endif
+
+      _audiod_fct[i].mounted = true;
       break;
     }
   }
@@ -2120,10 +2139,10 @@ bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3
   {
     audiod_function_t* audio = &_audiod_fct[func_id];
 
-#if CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
+#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
 
     // Data transmission of control interrupt finished
-    if (audio->ep_int_ctr == ep_addr)
+    if (audio->ep_int == ep_addr)
     {
       // According to USB2 specification, maximum payload of interrupt EP is 8 bytes on low speed, 64 bytes on full speed, and 1024 bytes on high speed (but only if an alternate interface other than 0 is used - see specification p. 49)
       // In case there is nothing to send we have to return a NAK - this is taken care of by PHY ???
@@ -2132,7 +2151,8 @@ bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3
       // I assume here, that things above are handled by PHY
       // All transmission is done - what remains to do is to inform job was completed
 
-      if (tud_audio_int_ctr_done_cb) TU_VERIFY(tud_audio_int_ctr_done_cb(rhport, (uint16_t) xferred_bytes));
+      if (tud_audio_int_done_cb) tud_audio_int_done_cb(rhport);
+      return true;
     }
 
 #endif
diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h
index ef3e12a06..040a760d6 100644
--- a/src/class/audio/audio_device.h
+++ b/src/class/audio/audio_device.h
@@ -196,13 +196,9 @@
 #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION     0                             // 0 or 1
 #endif
 
-// Audio interrupt control EP size - disabled if 0
-#ifndef CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
-#define CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN                     0                             // Audio interrupt control - if required - 6 Bytes according to UAC 2 specification (p. 74)
-#endif
-
-#ifndef CFG_TUD_AUDIO_INT_CTR_EP_IN_SW_BUFFER_SIZE
-#define CFG_TUD_AUDIO_INT_CTR_EP_IN_SW_BUFFER_SIZE          6                             // Buffer size of audio control interrupt EP - 6 Bytes according to UAC 2 specification (p. 74)
+// Enable/disable interrupt EP (required for notifying host of control changes)
+#ifndef CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
+#define CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP                   0                             // Feedback - 0 or 1
 #endif
 
 // Use software encoding/decoding
@@ -393,8 +389,8 @@ uint16_t tud_audio_n_write_support_ff             (uint8_t func_id, uint8_t ff_i
 tu_fifo_t* tud_audio_n_get_tx_support_ff          (uint8_t func_id, uint8_t ff_idx);
 #endif
 
-#if CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
-uint16_t    tud_audio_int_ctr_n_write             (uint8_t func_id, uint8_t const* buffer, uint16_t len);
+#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
+bool    tud_audio_int_n_write                     (uint8_t func_id, const audio_interrupt_data_t * data);
 #endif
 
 
@@ -437,8 +433,8 @@ static inline tu_fifo_t* tud_audio_get_tx_support_ff        (uint8_t ff_idx);
 
 // INT CTR API
 
-#if CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
-static inline uint16_t tud_audio_int_ctr_write              (uint8_t const* buffer, uint16_t len);
+#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
+static inline bool tud_audio_int_write                      (const audio_interrupt_data_t * data);
 #endif
 
 // Buffer control EP data and schedule a transmit
@@ -537,8 +533,8 @@ TU_ATTR_WEAK TU_ATTR_FAST_FUNC void tud_audio_feedback_interval_isr(uint8_t func
 
 #endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP
 
-#if CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
-TU_ATTR_WEAK bool tud_audio_int_ctr_done_cb(uint8_t rhport, uint16_t n_bytes_copied);
+#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
+TU_ATTR_WEAK void tud_audio_int_done_cb(uint8_t rhport);
 #endif
 
 // Invoked when audio set interface request received
@@ -669,10 +665,10 @@ static inline tu_fifo_t* tud_audio_get_tx_support_ff(uint8_t ff_idx)
 
 #endif
 
-#if CFG_TUD_AUDIO_INT_CTR_EPSIZE_IN
-static inline uint16_t tud_audio_int_ctr_write(uint8_t const* buffer, uint16_t len)
+#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP
+static inline bool tud_audio_int_write(const audio_interrupt_data_t * data)
 {
-  return tud_audio_int_ctr_n_write(0, buffer, len);
+  return tud_audio_int_n_write(0, data);
 }
 #endif
 
diff --git a/src/device/usbd.c b/src/device/usbd.c
index 96d0b698b..8f98862c6 100644
--- a/src/device/usbd.c
+++ b/src/device/usbd.c
@@ -1181,6 +1181,11 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t t
   // TU_VERIFY(tud_ready());
 
   TU_LOG_USBD("  Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes);
+#if CFG_TUD_LOG_LEVEL >= 3
+  if(dir == TUSB_DIR_IN) {
+    TU_LOG_MEM(CFG_TUD_LOG_LEVEL, buffer, total_bytes, 2);
+  }
+#endif
 
   // Attempt to transfer on a busy endpoint, sound like an race condition !
   TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0);
diff --git a/src/device/usbd.h b/src/device/usbd.h
index cf500143a..2e3987b99 100644
--- a/src/device/usbd.h
+++ b/src/device/usbd.h
@@ -393,6 +393,11 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 
 // For more channels, add definitions here
 
+/* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */
+#define TUD_AUDIO_DESC_STD_AC_INT_EP_LEN 7
+#define TUD_AUDIO_DESC_STD_AC_INT_EP(_ep, _interval) \
+  TUD_AUDIO_DESC_STD_AC_INT_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(6), _interval
+
 /* Standard AS Interface Descriptor(4.9.1) */
 #define TUD_AUDIO_DESC_STD_AS_INT_LEN 9
 #define TUD_AUDIO_DESC_STD_AS_INT(_itfnum, _altset, _nEPs, _stridx) \
@@ -468,7 +473,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -517,7 +522,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -565,7 +570,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\
   /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\
diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c
index 61a7e2703..059f674cd 100644
--- a/src/portable/analog/max3421/hcd_max3421.c
+++ b/src/portable/analog/max3421/hcd_max3421.c
@@ -451,10 +451,10 @@ static max3421_ep_t * find_next_pending_ep(max3421_ep_t * cur_ep) {
 // optional hcd configuration, called by tuh_configure()
 bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) {
   (void) rhport;
-  TU_VERIFY(cfg_id == TUH_CFGID_MAX3421);
+  TU_VERIFY(cfg_id == TUH_CFGID_MAX3421 && cfg_param != NULL);
 
   tuh_configure_param_t const* cfg = (tuh_configure_param_t const*) cfg_param;
-  _max_nak = cfg->max3421.max_nak;
+  _max_nak = tu_min8(cfg->max3421.max_nak, EP_STATE_ATTEMPT_MAX-EP_STATE_ATTEMPT_1);
   return true;
 }
 
@@ -654,7 +654,7 @@ static void xact_generic(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool
 
     // status
     if (ep->buf == NULL || ep->total_len == 0) {
-      uint8_t const hxfr = HXFR_HS | (ep->hxfr_bm.is_out ? HXFR_OUT_NIN : 0);
+      uint8_t const hxfr = (uint8_t) (HXFR_HS | (ep->hxfr & HXFR_OUT_NIN));
       peraddr_write(rhport, ep->daddr, in_isr);
       hxfr_write(rhport, hxfr, in_isr);
       return;
@@ -676,19 +676,18 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buf
   max3421_ep_t* ep = find_opened_ep(daddr, ep_num, ep_dir);
   TU_VERIFY(ep);
 
-  // control transfer can switch direction
-  ep->hxfr_bm.is_out = ep_dir ? 0u : 1u;
+  if (ep_num == 0) {
+    // control transfer can switch direction
+    ep->hxfr_bm.is_out = ep_dir ? 0 : 1;
+    ep->hxfr_bm.is_setup = 0;
+    ep->data_toggle = 1;
+  }
 
   ep->buf = buffer;
   ep->total_len = buflen;
   ep->xferred_len = 0;
   ep->state = EP_STATE_ATTEMPT_1;
 
-  if (ep_num == 0) {
-    ep->hxfr_bm.is_setup = 0;
-    ep->data_toggle = 1;
-  }
-
   // carry out transfer if not busy
   if (!atomic_flag_test_and_set(&_hcd_data.busy)) {
     xact_generic(rhport, ep, true, false);
diff --git a/src/portable/sony/cxd56/dcd_cxd56.c b/src/portable/sony/cxd56/dcd_cxd56.c
index 6677891a5..41814370e 100644
--- a/src/portable/sony/cxd56/dcd_cxd56.c
+++ b/src/portable/sony/cxd56/dcd_cxd56.c
@@ -102,17 +102,25 @@ static int _dcd_bind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_
   usbdev = dev;
   usbdcd_driver.ep[0] = dev->ep0;
 
+  #ifdef EP_ALLOCREQ
+  // SDK v2
   usbdcd_driver.req[0] = EP_ALLOCREQ(usbdcd_driver.ep[0]);
-  if (usbdcd_driver.req[0] != NULL)
-  {
+  if (usbdcd_driver.req[0] != NULL) {
     usbdcd_driver.req[0]->len = 64;
     usbdcd_driver.req[0]->buf = EP_ALLOCBUFFER(usbdcd_driver.ep[0], 64);
-    if (!usbdcd_driver.req[0]->buf)
-    {
+    if (!usbdcd_driver.req[0]->buf) {
       EP_FREEREQ(usbdcd_driver.ep[0], usbdcd_driver.req[0]);
       usbdcd_driver.req[0] = NULL;
+      return ENOMEM;
     }
   }
+  #else
+  // SDK v3
+  usbdcd_driver.req[0] = usbdev_allocreq(usbdcd_driver.ep[0], 64);
+  if (usbdcd_driver.req[0] == NULL) {
+    return ENOMEM;
+  }
+  #endif
 
   usbdcd_driver.req[0]->callback = usbdcd_ep0incomplete;
 
@@ -295,13 +303,19 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc)
   }
 
   usbdcd_driver.req[epnum] = NULL;
+
+  #ifdef EP_ALLOCREQ
+  // sdk v2
   usbdcd_driver.req[epnum] = EP_ALLOCREQ(usbdcd_driver.ep[epnum]);
-  if (usbdcd_driver.req[epnum] != NULL)
-  {
+  if (usbdcd_driver.req[epnum] != NULL) {
     usbdcd_driver.req[epnum]->len = ep_mps;
   }
-  else
-  {
+  #else
+  // sdk v3
+  usbdcd_driver.req[epnum] = usbdev_allocreq(usbdcd_driver.ep[epnum], ep_mps);
+  #endif
+
+  if(usbdcd_driver.req[epnum] == NULL) {
     return false;
   }
 
diff --git a/tools/build_utils.py b/tools/build_utils.py
index 5d735bc17..b66b64b97 100644
--- a/tools/build_utils.py
+++ b/tools/build_utils.py
@@ -64,18 +64,19 @@ def skip_example(example, board):
     skip_file = ex_dir / "skip.txt"
     only_file = ex_dir / "only.txt"
 
-    if skip_file.exists() and only_file.exists():
-        raise RuntimeError("Only have a skip or only file. Not both.")
-    elif skip_file.exists():
+    if skip_file.exists():
         skips = skip_file.read_text().split()
-        return ("mcu:" + mcu in skips or
-                "board:" + board in skips or
-                "family:" + family in skips)
-    elif only_file.exists():
+        if ("mcu:" + mcu in skips or
+            "board:" + board in skips or
+            "family:" + family in skips):
+            return True
+
+    if only_file.exists():
         onlys = only_file.read_text().split()
-        return not ("mcu:" + mcu in onlys or
-                    "board:" + board in onlys or
-                    "family:" + family in onlys)
+        if not ("mcu:" + mcu in onlys or
+                "board:" + board in onlys or
+                "family:" + family in onlys):
+            return True
 
     return False