add cmake for lpc15

6 files changed, 307 insertions, 1 deletions

diff --git a/hw/bsp/lpc15/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc15/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..33bc22b37
--- /dev/null
+++ b/hw/bsp/lpc15/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,179 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #ifdef __GNUC__
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-parameter"
+  #pragma GCC diagnostic ignored "-Wstrict-prototypes"
+  #endif
+
+  #include "chip.h"
+
+  #ifdef __GNUC__
+  #pragma GCC diagnostic pop
+  #endif
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#if defined(__ARM_FP) && __ARM_FP >= 4
+  #define configENABLE_FPU                      1
+#else
+  #define configENABLE_FPU                      0
+#endif
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       3
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif /* __FREERTOS_CONFIG__H */
diff --git a/hw/bsp/lpc15/boards/lpcxpresso1549/board.cmake b/hw/bsp/lpc15/boards/lpcxpresso1549/board.cmake
new file mode 100644
index 000000000..1e893b554
--- /dev/null
+++ b/hw/bsp/lpc15/boards/lpcxpresso1549/board.cmake
@@ -0,0 +1,11 @@
+set(JLINK_DEVICE lpc1549)
+set(PYOCD_TARGET lpc1549)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/lpc1549.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    CFG_EXAMPLE_MSC_READONLY
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()
diff --git a/hw/bsp/lpc15/family.c b/hw/bsp/lpc15/family.c
index cd5c9ab15..b9ce39648 100644
--- a/hw/bsp/lpc15/family.c
+++ b/hw/bsp/lpc15/family.c
@@ -24,7 +24,18 @@
  * This file is part of the TinyUSB stack.
  */
 
+#ifdef __GNUC__
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wstrict-prototypes"
+  #pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
 #include "chip.h"
+
+#ifdef __GNUC__
+  #pragma GCC diagnostic pop
+#endif
+
 #include "bsp/board_api.h"
 #include "board.h"
 
diff --git a/hw/bsp/lpc15/family.cmake b/hw/bsp/lpc15/family.cmake
new file mode 100644
index 000000000..61b47d852
--- /dev/null
+++ b/hw/bsp/lpc15/family.cmake
@@ -0,0 +1,104 @@
+include_guard()
+
+set(LPC_FAMILY 15xx)
+set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc${LPC_FAMILY}/lpc_chip_${LPC_FAMILY})
+set(CMSIS_DIR ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS LPC15XX CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  add_library(${BOARD_TARGET} STATIC
+    ${SDK_DIR}/../gcc/cr_startup_lpc${LPC_FAMILY}.c
+    ${SDK_DIR}/src/chip_${LPC_FAMILY}.c
+    ${SDK_DIR}/src/clock_${LPC_FAMILY}.c
+    ${SDK_DIR}/src/gpio_${LPC_FAMILY}.c
+    ${SDK_DIR}/src/iocon_${LPC_FAMILY}.c
+    ${SDK_DIR}/src/swm_${LPC_FAMILY}.c
+    ${SDK_DIR}/src/sysctl_${LPC_FAMILY}.c
+    ${SDK_DIR}/src/sysinit_${LPC_FAMILY}.c
+    ${SDK_DIR}/src/uart_${LPC_FAMILY}.c
+    )
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    __USE_LPCOPEN
+    #__VTOR_PRESENT=0
+    CORE_M3
+    CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\)
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${SDK_DIR}/inc
+    ${CMSIS_DIR}/CMSIS/Core/Include
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_compile_options(${BOARD_TARGET} PUBLIC -nostdlib)
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_LPC15XX ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_jlink(${TARGET})
+  #family_flash_nxplink(${TARGET})
+endfunction()
diff --git a/hw/bsp/lpc15/family.mk b/hw/bsp/lpc15/family.mk
index 28ab1db7b..b83e008e8 100644
--- a/hw/bsp/lpc15/family.mk
+++ b/hw/bsp/lpc15/family.mk
@@ -28,8 +28,8 @@ SRC_C += \
 	$(MCU_DIR)/src/iocon_15xx.c \
 	$(MCU_DIR)/src/swm_15xx.c \
 	$(MCU_DIR)/src/sysctl_15xx.c \
+	$(MCU_DIR)/src/sysinit_15xx.c \
 	$(MCU_DIR)/src/uart_15xx.c \
-	$(MCU_DIR)/src/sysinit_15xx.c
 
 INC += \
 	$(TOP)/$(BOARD_PATH) \
diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
index 6bb440743..cc18cf59b 100644
--- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
+++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
@@ -45,6 +45,7 @@
   #ifdef __GNUC__
   #pragma GCC diagnostic push
   #pragma GCC diagnostic ignored "-Wunused-parameter"
+  #pragma GCC diagnostic ignored "-Wstrict-prototypes"
   #endif
 
   #include "chip.h"