try to add lpc4357usb board

5 files changed, 1302 insertions, 3 deletions

diff --git a/demos/bsp/boards/board.h b/demos/bsp/boards/board.h
index c8651bdc6..bf8b6a8ee 100644
--- a/demos/bsp/boards/board.h
+++ b/demos/bsp/boards/board.h
@@ -73,6 +73,8 @@
 #define BOARD_HITEX4350             6
 #define BOARD_LPCXPRESSO1769        7
 
+#define BOARD_LPC4357USB            8
+
 //--------------------------------------------------------------------+
 // PRINTF TARGET DEFINE
 //--------------------------------------------------------------------+
@@ -99,6 +101,8 @@
   #include "hitex/board_hitex4350.h"
 #elif BOARD == BOARD_LPCXPRESSO1769
   #include "lpcxpresso/board_lpcxpresso1769.h"
+#elif BOARD == BOARD_LPC4357USB
+  #include "microbuilder/board_lpc4357usb.h"
 #else
   #error BOARD is not defined or supported yet
 #endif
diff --git a/demos/bsp/boards/embedded_artists/board_ea4357.c b/demos/bsp/boards/embedded_artists/board_ea4357.c
index 0e2854e53..a6aa4347f 100644
--- a/demos/bsp/boards/embedded_artists/board_ea4357.c
+++ b/demos/bsp/boards/embedded_artists/board_ea4357.c
@@ -42,9 +42,9 @@
 
 
 #define BOARD_UART_PORT           LPC_USART0
-#define BOARD_UART_PIN_PORT 0x0f
-#define BOARD_UART_PIN_TX   10 // PF.10 : UART0_TXD
-#define BOARD_UART_PIN_RX   11 // PF.11 : UART0_RXD
+#define BOARD_UART_PIN_PORT       0x0f
+#define BOARD_UART_PIN_TX         10 // PF.10 : UART0_TXD
+#define BOARD_UART_PIN_RX         11 // PF.11 : UART0_RXD
 
 void board_init(void)
 {
diff --git a/demos/bsp/boards/microbuilder/board_lpc4357usb.c b/demos/bsp/boards/microbuilder/board_lpc4357usb.c
new file mode 100644
index 000000000..09fe5ab7a
--- /dev/null
+++ b/demos/bsp/boards/microbuilder/board_lpc4357usb.c
@@ -0,0 +1,123 @@
+/**************************************************************************/
+/*!
+    @file     board_lpc4357usb.c
+    @author   hathach (tinyusb.org)
+
+    @section LICENSE
+
+    Software License Agreement (BSD License)
+
+    Copyright (c) 2013, hathach (tinyusb.org)
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+    1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holders nor the
+    names of its contributors may be used to endorse or promote products
+    derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+    This file is part of the tinyusb stack.
+*/
+/**************************************************************************/
+
+#include "../board.h"
+
+#if BOARD == BOARD_LPC4357USB
+
+#define BOARD_MAX_LEDS  1
+const static struct {
+  uint8_t port;
+  uint8_t pin;
+}leds[BOARD_MAX_LEDS] = { {6, 1} };
+
+#define BOARD_UART_PORT           LPC_USART0
+#define BOARD_UART_PIN_PORT       0x0f
+#define BOARD_UART_PIN_TX         10 // PF.10 : UART0_TXD
+#define BOARD_UART_PIN_RX         11 // PF.11 : UART0_RXD
+
+
+void board_init(void)
+{
+  SystemInit();
+  CGU_Init();
+	SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/CFG_TICKS_PER_SECOND );	/* 1 ms Timer */
+
+	//------------- USB Bus power HOST ONLY-------------//
+//	scu_pinmux(0x1, 7, MD_PUP | MD_EZI, FUNC4);	// P1_7 USB0_PWR_EN, USB0 VBus function Xplorer
+//
+//	scu_pinmux(0x2, 6, MD_PUP | MD_EZI, FUNC4); // P2_6 is configured as GPIO5[6] for USB1_PWR_EN
+//	GPIO_SetDir   (5, BIT_(6), 1);              // GPIO5[6] is output
+//	GPIO_SetValue (5, BIT_(6));                 // GPIO5[6] output high
+
+	//------------- Led Init -------------//
+	for (uint8_t i=0; i<BOARD_MAX_LEDS; i++)
+	{
+	  scu_pinmux(leds[i].port, leds[i].pin, MD_PUP|MD_EZI|MD_ZI, FUNC4);
+	  GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
+	}
+
+#if CFG_UART_ENABLE
+  //------------- UART init -------------//
+	scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN             , FUNC1);
+	scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
+
+	UART_CFG_Type UARTConfigStruct;
+  UART_ConfigStructInit(&UARTConfigStruct);
+	UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
+	UARTConfigStruct.Clock_Speed = 0;
+
+	UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
+	UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
+#endif
+
+}
+
+//--------------------------------------------------------------------+
+// LEDS
+//--------------------------------------------------------------------+
+void board_leds(uint32_t on_mask, uint32_t off_mask)
+{
+  for (uint32_t i=0; i<BOARD_MAX_LEDS; i++)
+  {
+    if ( on_mask & BIT_(i))
+    {
+      GPIO_SetValue(leds[i].port, BIT_(leds[i].pin));
+    }else if ( off_mask & BIT_(i)) // on_mask take precedence over off_mask
+    {
+      GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin));
+    }
+  }
+}
+
+//--------------------------------------------------------------------+
+// UART
+//--------------------------------------------------------------------+
+#if CFG_UART_ENABLE
+uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
+{
+  return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
+}
+
+uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
+{
+  return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
+}
+#endif
+
+#endif
diff --git a/demos/bsp/boards/microbuilder/board_lpc4357usb.h b/demos/bsp/boards/microbuilder/board_lpc4357usb.h
new file mode 100644
index 000000000..ac051a409
--- /dev/null
+++ b/demos/bsp/boards/microbuilder/board_lpc4357usb.h
@@ -0,0 +1,67 @@
+/**************************************************************************/
+/*!
+    @file     board_lpc4357usb.h
+    @author   hathach (tinyusb.org)
+
+    @section LICENSE
+
+    Software License Agreement (BSD License)
+
+    Copyright (c) 2013, hathach (tinyusb.org)
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+    1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holders nor the
+    names of its contributors may be used to endorse or promote products
+    derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+    This file is part of the tinyusb stack.
+*/
+/**************************************************************************/
+
+/** \ingroup TBD
+ *  \defgroup TBD
+ *  \brief TBD
+ *
+ *  @{
+ */
+
+#ifndef _TUSB_BOARD_LPC4357USB_H_
+#define _TUSB_BOARD_LPC4357USB_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "LPC43xx.h"
+#include "lpc43xx_scu.h"
+#include "lpc43xx_cgu.h"
+#include "lpc43xx_gpio.h"
+#include "lpc43xx_uart.h"
+
+#define CFG_PRINTF_TARGET PRINTF_TARGET_DEBUG_CONSOLE // PRINTF_TARGET_UART
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_BOARD_LPC4357USB_H_ */
+
+/** @} */
diff --git a/demos/host/host_os_none/.cproject b/demos/host/host_os_none/.cproject
index 9c3ada1a0..b6e58c291 100644
--- a/demos/host/host_os_none/.cproject
+++ b/demos/host/host_os_none/.cproject
@@ -4432,6 +4432,1111 @@
 				</scannerConfigBuildInfo>
 			</storageModule>
 		</cconfiguration>
+		<cconfiguration id="com.crt.advproject.config.exe.debug.1239969983.131108573">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.crt.advproject.config.exe.debug.1239969983.131108573" moduleId="org.eclipse.cdt.core.settings" name="Board LPC4357USB">
+				<macros>
+					<stringMacro name="CFLAGS_OFF" type="VALUE_TEXT" value=""/>
+					<stringMacro name="CFLAGS" type="VALUE_TEXT" value="${CFLAGS_OFF}"/>
+					<stringMacro name="CFLAGS_ON" type="VALUE_TEXT" value="-pedantic -Wextra -Wswitch-default -Wunsafe-loop-optimizations -Wcast-align -Wlogical-op -Wpacked-bitfield-compat -Wpadded -Wnested-externs -Wredundant-decls -Winline -Wpacked"/>
+				</macros>
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.MakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactExtension="axf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="microbuilder.eu" errorParsers="org.eclipse.cdt.core.MakeErrorParser;org.eclipse.cdt.core.GCCErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.CWDLocator;org.eclipse.cdt.core.GmakeErrorParser" id="com.crt.advproject.config.exe.debug.1239969983.131108573" name="Board LPC4357USB" parent="com.crt.advproject.config.exe.debug" postannouncebuildStep="Performing post-build steps" postbuildStep="arm-none-eabi-size &quot;${BuildArtifactFileName}&quot;; # arm-none-eabi-objcopy -O binary &quot;${BuildArtifactFileName}&quot; &quot;${BuildArtifactFileBaseName}.bin&quot; ; checksum -p ${TargetChip} -d &quot;${BuildArtifactFileBaseName}.bin&quot;;  " preannouncebuildStep="" prebuildStep="">
+					<folderInfo id="com.crt.advproject.config.exe.debug.1239969983.131108573." name="/" resourcePath="">
+						<toolChain errorParsers="" id="com.crt.advproject.toolchain.exe.debug.1698231974" name="Code Red MCU Tools" superClass="com.crt.advproject.toolchain.exe.debug">
+							<targetPlatform binaryParser="org.eclipse.cdt.core.ELF;org.eclipse.cdt.core.GNU_ELF" id="com.crt.advproject.platform.exe.debug.1405370013" name="ARM-based MCU (Debug)" superClass="com.crt.advproject.platform.exe.debug"/>
+							<builder buildPath="${workspace_loc:/host/Debug}" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.461931673" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
+							<tool id="com.crt.advproject.cpp.exe.debug.1477382307" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
+							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${CFLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.1697270528" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
+								<option id="com.crt.advproject.gcc.arch.114241566" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gcc.thumb.1955499807" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
+								<option id="gnu.c.compiler.option.preprocessor.def.symbols.1199696484" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="__REDLIB__"/>
+									<listOptionValue builtIn="false" value="__USE_CMSIS=CMSISv2p10_LPC43xx_DriverLib"/>
+									<listOptionValue builtIn="false" value="CORE_M4"/>
+									<listOptionValue builtIn="false" value="MCU=MCU_LPC43XX"/>
+									<listOptionValue builtIn="false" value="BOARD=BOARD_LPC4357USB"/>
+									<listOptionValue builtIn="false" value="TUSB_CFG_OS=TUSB_OS_NONE"/>
+									<listOptionValue builtIn="false" value="DEBUG"/>
+									<listOptionValue builtIn="false" value="__CODE_RED"/>
+								</option>
+								<option id="gnu.c.compiler.option.misc.other.2112915306" name="Other flags" superClass="gnu.c.compiler.option.misc.other" value="-c -fmessage-length=0 -fno-builtin -ffunction-sections -fdata-sections" valueType="string"/>
+								<option id="gnu.c.compiler.option.include.paths.309905550" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" valueType="includePath">
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/inc}&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}}&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/bsp}&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/tinyusb}&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/src}&quot;"/>
+								</option>
+								<option id="com.crt.advproject.c.misc.dialect.55190406" name="C Dialect" superClass="com.crt.advproject.c.misc.dialect" value="com.crt.advproject.misc.dialect.gnu99" valueType="enumerated"/>
+								<inputType id="com.crt.advproject.compiler.input.1484600680" superClass="com.crt.advproject.compiler.input"/>
+							</tool>
+							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.gas.exe.debug.114684693" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.debug">
+								<option id="com.crt.advproject.gas.arch.1766999311" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gas.thumb.1230003385" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
+								<option id="gnu.both.asm.option.flags.crt.364080237" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -D__REDLIB__ -DDEBUG -D__CODE_RED" valueType="string"/>
+								<inputType id="com.crt.advproject.assembler.input.53005881" name="Additional Assembly Source Files" superClass="com.crt.advproject.assembler.input"/>
+								<inputType id="cdt.managedbuild.tool.gnu.assembler.input.969460207" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
+							</tool>
+							<tool id="com.crt.advproject.link.cpp.exe.debug.754491315" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.debug"/>
+							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.crt.advproject.link.exe.debug.906566981" name="MCU Linker" superClass="com.crt.advproject.link.exe.debug">
+								<option id="com.crt.advproject.link.arch.967278694" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.thumb.1538519930" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
+								<option id="com.crt.advproject.link.script.852885755" name="Linker script" superClass="com.crt.advproject.link.script" value="&quot;host_os_none_Board_LPC4357USB.ld&quot;" valueType="string"/>
+								<option id="com.crt.advproject.link.manage.1045150248" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
+								<option id="gnu.c.link.option.nostdlibs.1624426698" name="No startup or default libs (-nostdlib)" superClass="gnu.c.link.option.nostdlibs" value="true" valueType="boolean"/>
+								<option id="gnu.c.link.option.other.2063199486" name="Other options (-Xlinker [option])" superClass="gnu.c.link.option.other" valueType="stringList">
+									<listOptionValue builtIn="false" value="-Map=&quot;${BuildArtifactFileBaseName}.map&quot;"/>
+									<listOptionValue builtIn="false" value="--gc-sections"/>
+								</option>
+								<option id="gnu.c.link.option.libs.1973103706" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
+								<option id="gnu.c.link.option.paths.909013832" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1101482430" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
+								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1196932037" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
+									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
+								</inputType>
+							</tool>
+						</toolChain>
+					</folderInfo>
+					<sourceEntries>
+						<entry excluding="bsp/lpc175x_6x|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_wwdt.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_i2s.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_sct.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_rit.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_rgu.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_qei.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_rtc.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_mcpwm.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_lcd.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_gpdma.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/debug_frmwrk.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_evrt.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_emc.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_dac.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_can.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_atimer.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_adc.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/LCDTerm.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/Font5x7.c|bsp/boards/embedded_artists/oem_base_board|bsp/boards/embedded_artists/oem_base_board/acc.c|bsp/boards/embedded_artists/oem_base_board/base_eeprom.c|ngx|bsp/boards/embedded_artists/oem_base_board/joystick.c|bsp/lpc11uxx|bsp/boards/embedded_artists/oem_base_board/lm75a.c|bsp/boards/embedded_artists/oem_base_board/uda1380.c|bsp/lpc13uxx|bsp/boards/embedded_artists/oem_base_board/memreg.c|bsp/boards/embedded_artists/oem_base_board/norflash.c" flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name=""/>
+					</sourceEntries>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+			<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
+			<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+			<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
+			<storageModule moduleId="scannerConfiguration">
+				<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+				<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+					<buildOutputProvider>
+						<openAction enabled="false" filePath=""/>
+						<parser enabled="false"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="com.crt.advproject.specsFile">
+						<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+					<buildOutputProvider>
+						<openAction enabled="false" filePath=""/>
+						<parser enabled="false"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="com.crt.advproject.specsFile">
+						<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+					<buildOutputProvider>
+						<openAction enabled="false" filePath=""/>
+						<parser enabled="false"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="com.crt.advproject.specsFile">
+						<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+					<buildOutputProvider>
+						<openAction enabled="true" filePath=""/>
+						<parser enabled="true"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="specsFile">
+						<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+					<buildOutputProvider>
+						<openAction enabled="true" filePath=""/>
+						<parser enabled="true"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="makefileGenerator">
+						<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+					<buildOutputProvider>
+						<openAction enabled="true" filePath=""/>
+						<parser enabled="true"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="specsFile">
+						<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+					<buildOutputProvider>
+						<openAction enabled="true" filePath=""/>
+						<parser enabled="true"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="specsFile">
+						<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+					<buildOutputProvider>
+						<openAction enabled="true" filePath=""/>
+						<parser enabled="true"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="specsFile">
+						<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+					<buildOutputProvider>
+						<openAction enabled="true" filePath=""/>
+						<parser enabled="true"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="specsFile">
+						<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+					<buildOutputProvider>
+						<openAction enabled="true" filePath=""/>
+						<parser enabled="true"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="specsFile">
+						<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+					<buildOutputProvider>
+						<openAction enabled="true" filePath=""/>
+						<parser enabled="true"/>
+					</buildOutputProvider>
+					<scannerInfoProvider id="specsFile">
+						<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
+						<parser enabled="true"/>
+					</scannerInfoProvider>
+				</profile>
+				<scannerConfigBuildInfo instanceId="com.crt.advproject.config.exe.debug.1239969983.636406670;com.crt.advproject.config.exe.debug.1239969983.636406670.;com.crt.advproject.gas.exe.debug.973267950;com.crt.advproject.assembler.input.1834537770">
+					<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.crt.advproject.GCCManagedMakePerProjectProfile"/>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="makefileGenerator">
+							<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+				</scannerConfigBuildInfo>
+				<scannerConfigBuildInfo instanceId="com.crt.advproject.config.exe.debug.1239969983.636406670;com.crt.advproject.config.exe.debug.1239969983.636406670.843927143;com.crt.advproject.gcc.exe.debug.635604216;com.crt.advproject.compiler.input.1053530279">
+					<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.crt.advproject.GCCManagedMakePerProjectProfile"/>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="makefileGenerator">
+							<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+				</scannerConfigBuildInfo>
+				<scannerConfigBuildInfo instanceId="com.crt.advproject.config.exe.debug.1239969983;com.crt.advproject.config.exe.debug.1239969983.413673793;com.crt.advproject.gcc.exe.debug.77440694;com.crt.advproject.compiler.input.1175112591">
+					<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.crt.advproject.GCCManagedMakePerProjectProfile"/>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="makefileGenerator">
+							<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+				</scannerConfigBuildInfo>
+				<scannerConfigBuildInfo instanceId="com.crt.advproject.config.exe.debug.1239969983.636406670;com.crt.advproject.config.exe.debug.1239969983.636406670.;com.crt.advproject.gcc.exe.debug.502985594;com.crt.advproject.compiler.input.772057054">
+					<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.crt.advproject.GCCManagedMakePerProjectProfile"/>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="makefileGenerator">
+							<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+				</scannerConfigBuildInfo>
+				<scannerConfigBuildInfo instanceId="com.crt.advproject.config.exe.debug.1239969983;com.crt.advproject.config.exe.debug.1239969983.;com.crt.advproject.gcc.exe.debug.597047349;com.crt.advproject.compiler.input.217124913">
+					<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.crt.advproject.GCCManagedMakePerProjectProfile"/>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="makefileGenerator">
+							<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+				</scannerConfigBuildInfo>
+				<scannerConfigBuildInfo instanceId="com.crt.advproject.config.exe.debug.1239969983.636406670;com.crt.advproject.config.exe.debug.1239969983.636406670.843927143;com.crt.advproject.gas.exe.debug.1552571445;com.crt.advproject.assembler.input.73063310">
+					<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.crt.advproject.GCCManagedMakePerProjectProfile"/>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="makefileGenerator">
+							<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+				</scannerConfigBuildInfo>
+				<scannerConfigBuildInfo instanceId="com.crt.advproject.config.exe.debug.1239969983;com.crt.advproject.config.exe.debug.1239969983.413673793;com.crt.advproject.gas.exe.debug.1378146670;com.crt.advproject.assembler.input.625657547">
+					<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.crt.advproject.GCCManagedMakePerProjectProfile"/>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="makefileGenerator">
+							<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+				</scannerConfigBuildInfo>
+				<scannerConfigBuildInfo instanceId="com.crt.advproject.config.exe.debug.1239969983;com.crt.advproject.config.exe.debug.1239969983.;com.crt.advproject.gas.exe.debug.1376287865;com.crt.advproject.assembler.input.1812008425">
+					<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.crt.advproject.GCCManagedMakePerProjectProfile"/>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-c++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file} " command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="com.crt.advproject.GASManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="false" filePath=""/>
+							<parser enabled="false"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="com.crt.advproject.specsFile">
+							<runAction arguments="-x assembler-with-cpp -E -P -v -dD ${plugin_state_location}/${specs_file}" command="arm-none-eabi-gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="makefileGenerator">
+							<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+					<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+						<buildOutputProvider>
+							<openAction enabled="true" filePath=""/>
+							<parser enabled="true"/>
+						</buildOutputProvider>
+						<scannerInfoProvider id="specsFile">
+							<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
+							<parser enabled="true"/>
+						</scannerInfoProvider>
+					</profile>
+				</scannerConfigBuildInfo>
+			</storageModule>
+		</cconfiguration>
 	</storageModule>
 	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
 		<project id="host.com.crt.advproject.projecttype.exe.1859815870" name="Executable" projectType="com.crt.advproject.projecttype.exe"/>