rename PIO_USB_PIN_DP to PIO_USB_DP_PIN and change from 2 to 20 & moved to board.h

add support for  PIO_USB_VBUSEN_PIN and its state.

2 files changed, 19 insertions, 4 deletions

diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h
index 237f29dc2..56b8fec84 100644
--- a/hw/bsp/rp2040/board.h
+++ b/hw/bsp/rp2040/board.h
@@ -46,6 +46,18 @@
 #define UART_RX_PIN           PICO_DEFAULT_UART_RX_PIN
 #endif
 
+// PIO_USB_DP_PIN_DEFAULT is 0, which conflict with UART, change to other pin
+#ifndef PIO_USB_DP_PIN
+#define PIO_USB_DP_PIN        20
+#endif
+
+// VBUS enable pin and its active state
+// #define PIO_USB_VBUSEN_PIN    22
+
+#ifndef PIO_USB_VBUSEN_STATE
+#define PIO_USB_VBUSEN_STATE  1
+#endif
+
 #ifdef __cplusplus
  }
 #endif
diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c
index 90e2192c0..ee5a73ff6 100644
--- a/hw/bsp/rp2040/family.c
+++ b/hw/bsp/rp2040/family.c
@@ -39,9 +39,6 @@
 #include "pio_usb.h"
 #endif
 
-// PIO_USB_DP_PIN_DEFAULT is 0, which conflict with UART, change to 2
-#define PICO_PIO_USB_PIN_DP   2
-
 #ifdef BUTTON_BOOTSEL
 // This example blinks the Picoboard LED when the BOOTSEL button is pressed.
 //
@@ -138,10 +135,16 @@ void board_init(void)
   // Set the system clock to a multiple of 120mhz for bitbanging USB with pico-usb
   set_sys_clock_khz(120000, true);
 
+#ifdef PIO_USB_VBUSEN_PIN
+  gpio_init(PIO_USB_VBUSEN_PIN);
+  gpio_set_dir(PIO_USB_VBUSEN_PIN, GPIO_OUT);
+  gpio_put(PIO_USB_VBUSEN_PIN, PIO_USB_VBUSEN_STATE);
+#endif
+
   // rp2040 use pico-pio-usb for host tuh_configure() can be used to passed pio configuration to the host stack
   // Note: tuh_configure() must be called before tuh_init()
   pio_usb_configuration_t pio_cfg = PIO_USB_DEFAULT_CONFIG;
-  pio_cfg.pin_dp = PICO_PIO_USB_PIN_DP;
+  pio_cfg.pin_dp = PIO_USB_DP_PIN;
   tuh_configure(BOARD_TUH_RHPORT, TUH_CFGID_RPI_PIO_USB_CONFIGURATION, &pio_cfg);
 #endif