Add timer1 on pi4 for blinky

this get usb irq triggered even without ISB() in previous commit

3 files changed, 30 insertions, 55 deletions

diff --git a/README.rst b/README.rst
index 329c0da53..1db022fc8 100644
--- a/README.rst
+++ b/README.rst
@@ -35,7 +35,7 @@ The stack supports the following MCUs:
 - **Dialog:** DA1469x
 - **Espressif:** ESP32-S2, ESP32-S3
 - **MicroChip:** SAMD11, SAMD21, SAMD51, SAME5x, SAMG55, SAML21, SAML22, SAME7x
-- **NordicSemi:** nRF52833, nRF52840
+- **NordicSemi:** nRF52833, nRF52840, nRF5340
 - **Nuvoton:** NUC120, NUC121/NUC125, NUC126, NUC505
 - **NXP:**
 
@@ -45,9 +45,9 @@ The stack supports the following MCUs:
 
 - **Raspberry Pi:** RP2040
 - **Renesas:** RX63N, RX65N
-- **Silabs:** EFM32GG12
+- **Silabs:** EFM32GG
 - **Sony:** CXD56
-- **ST:** STM32 series: L0, L1, L4, F0, F1, F2, F3, F4, F7, H7 both FullSpeed and HighSpeed
+- **ST:** STM32 series: L0, L1, L4, L4+, F0, F1, F2, F3, F4, F7, H7
 - **TI:** MSP430
 - **ValentyUSB:** eptri
 
diff --git a/hw/bsp/raspberrypi4/family.c b/hw/bsp/raspberrypi4/family.c
index 7a7a0e9ff..ba0b2700a 100644
--- a/hw/bsp/raspberrypi4/family.c
+++ b/hw/bsp/raspberrypi4/family.c
@@ -33,6 +33,14 @@
 #include "broadcom/caches.h"
 #include "broadcom/vcmailbox.h"
 
+// LED
+#define LED_PIN               18
+#define LED_STATE_ON          1
+
+// Button
+#define BUTTON_PIN            16
+#define BUTTON_STATE_ACTIVE   0
+
 //--------------------------------------------------------------------+
 // Forward USB interrupt events to TinyUSB IRQ Handler
 //--------------------------------------------------------------------+
@@ -50,63 +58,27 @@ void USB_IRQHandler(void)
 //--------------------------------------------------------------------+
 void board_init(void)
 {
-  gpio_initOutputPinWithPullNone(18);
-  gpio_initOutputPinWithPullNone(19);
-  gpio_initOutputPinWithPullNone(20);
-  gpio_initOutputPinWithPullNone(21);
-  gpio_setPinOutputBool(18, true);
-  gpio_initOutputPinWithPullNone(42);
   setup_mmu_flat_map();
   init_caches();
 
-  // gpio_initOutputPinWithPullNone(23);
-  // gpio_initOutputPinWithPullNone(24);
-  // gpio_initOutputPinWithPullNone(25);
-  gpio_setPinOutputBool(18, false);
+  // LED
+  gpio_initOutputPinWithPullNone(LED_PIN);
+  board_led_write(true);
+
+  // Button
+  // TODO
+
+  // Uart
   uart_init();
-  gpio_setPinOutputBool(18, true);
-  gpio_setPinOutputBool(18, false);
-  for (size_t i = 0; i < 5; i++) {
-  // while (true) {
-    for (size_t j = 0; j < 1000000; j++) {
-      __asm__("nop");
-    }
-    gpio_setPinOutputBool(42, true);
-    gpio_setPinOutputBool(18, true);
-    gpio_setPinOutputBool(19, true);
-    gpio_setPinOutputBool(20, true);
-    gpio_setPinOutputBool(21, true);
-    for (size_t j = 0; j < 1000000; j++) {
-      __asm__("nop");
-    }
-    gpio_setPinOutputBool(42, false);
-    gpio_setPinOutputBool(18, false);
-    gpio_setPinOutputBool(19, false);
-    gpio_setPinOutputBool(20, false);
-    gpio_setPinOutputBool(21, false);
-  }
-  // uart_writeText("hello from io\n");
-  // gpio_setPinOutputBool(24, true);
-  // gpio_setPinOutputBool(24, false);
-  // gpio_setPinOutputBool(25, true);
-  // print();
-  // gpio_setPinOutputBool(25, false);
-  // while (true) {
-  // // for (size_t i = 0; i < 5; i++) {
-  //   for (size_t j = 0; j < 10000000000; j++) {
-  //     __asm__("nop");
-  //   }
-  //   gpio_setPinOutputBool(42, true);
-  //   for (size_t j = 0; j < 10000000000; j++) {
-  //     __asm__("nop");
-  //   }
-  //   gpio_setPinOutputBool(42, false);
-  // }
-  // while (1) uart_update();
 
   // Turn on USB peripheral.
   vcmailbox_set_power_state(VCMAILBOX_DEVICE_USB_HCD, true);
 
+  // Timer 1/1024 second tick
+  SYSTMR->CS_b.M1 = 1;
+  SYSTMR->C1 = SYSTMR->CLO + 977;
+  BP_EnableIRQ(TIMER_1_IRQn);
+
   BP_SetPriority(USB_IRQn, 0x00);
   BP_ClearPendingIRQ(USB_IRQn);
   BP_EnableIRQ(USB_IRQn);
@@ -115,7 +87,7 @@ void board_init(void)
 
 void board_led_write(bool state)
 {
-  gpio_setPinOutputBool(42, state);
+  gpio_setPinOutputBool(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
 }
 
 uint32_t board_button_read(void)
@@ -145,9 +117,12 @@ int board_uart_write(void const * buf, int len)
 
 #if CFG_TUSB_OS  == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
-void SysTick_Handler (void)
+
+void TIMER_1_IRQHandler(void)
 {
   system_ticks++;
+  SYSTMR->C1 += 977;
+  SYSTMR->CS_b.M1 = 1;
 }
 
 uint32_t board_millis(void)
diff --git a/hw/bsp/raspberrypi4/family.mk b/hw/bsp/raspberrypi4/family.mk
index 475cfa4ff..c65070a71 100644
--- a/hw/bsp/raspberrypi4/family.mk
+++ b/hw/bsp/raspberrypi4/family.mk
@@ -48,4 +48,4 @@ $(BUILD)/kernel8.img: $(BUILD)/$(PROJECT).elf
 # Copy to kernel to netboot drive or SD card
 # Change destinaation to fit your need
 flash: $(BUILD)/kernel8.img
-	@$(CP) $< /home/$(USER)/Documents/code/pi4_tinyusb/boot_cpy
+	$(CP) $< /home/$(USER)/Documents/code/pi4_tinyusb/boot_cpy