merge samd51 and same5x

36 files changed, 403 insertions, 749 deletions

diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml
index 55c4bd204..40dc77593 100644
--- a/.github/workflows/build_arm.yml
+++ b/.github/workflows/build_arm.yml
@@ -36,7 +36,7 @@ jobs:
         family:
         # Alphabetical order
         - 'mm32'
-        - 'samd11 same5x'
+        - 'same5x'
         - 'tm4c123 xmc4000'
     steps:
     - name: Setup Python
diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml
index be24c09d4..75ce707aa 100644
--- a/.github/workflows/build_cmake.yml
+++ b/.github/workflows/build_cmake.yml
@@ -48,7 +48,7 @@ jobs:
           - 'nrf'
           - 'ra'
           - 'rp2040'
-          - 'samd21 saml2x samd51'
+          - 'samd11 samd21 saml2x samd51'
           - 'stm32f0'
           - 'stm32f1'
           - 'stm32f2'
diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake
index 33b309873..c0d1f5a7e 100644
--- a/hw/bsp/samd11/family.cmake
+++ b/hw/bsp/samd11/family.cmake
@@ -1,7 +1,7 @@
 include_guard()
 
-set(MCU_VARIANT samd11)
-set(SDK_DIR ${TOP}/hw/mcu/microchip/${MCU_VARIANT})
+set(SAM_FAMILY samd11)
+set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY})
 set(CMSIS_5 ${TOP}/lib/CMSIS_5)
 
 include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
@@ -27,11 +27,11 @@ function(add_board_target BOARD_TARGET)
     message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined")
   endif ()
 
-  set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${MCU_VARIANT}.c)
+  set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c)
   set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
 
   add_library(${BOARD_TARGET} STATIC
-    ${SDK_DIR}/gcc/system_${MCU_VARIANT}.c
+    ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c
     ${SDK_DIR}/hal/src/hal_atomic.c
     ${SDK_DIR}/hpl/gclk/hpl_gclk.c
     ${SDK_DIR}/hpl/pm/hpl_pm.c
diff --git a/hw/bsp/samd51/boards/d5035_01/board.cmake b/hw/bsp/samd51/boards/d5035_01/board.cmake
new file mode 100644
index 000000000..adf4f6a6d
--- /dev/null
+++ b/hw/bsp/samd51/boards/d5035_01/board.cmake
@@ -0,0 +1,13 @@
+set(SAM_FAMILY same51)
+
+set(JLINK_DEVICE ATSAME51J19)
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/same51j19a_flash.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    __SAME51J19A__
+    SVC_Handler=SVCall_Handler
+    CONF_CPU_FREQUENCY=80000000
+    CONF_GCLK_USB_FREQUENCY=48000000
+    )
+endfunction()
diff --git a/hw/bsp/samd51/boards/d5035_01/board.h b/hw/bsp/samd51/boards/d5035_01/board.h
new file mode 100644
index 000000000..2cf59f5d1
--- /dev/null
+++ b/hw/bsp/samd51/boards/d5035_01/board.h
@@ -0,0 +1,198 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PIN               PIN_PA02
+#define LED_STATE_ON          1
+
+// Button: no button
+
+// UART: HWREV < 3: SERCOM5 on PB02, otherwise SERCOM0 on PA08
+// XTAL configure is also different for HWREV as well
+
+#if 0
+static inline void init_clock(void) {
+  /* AUTOWS is enabled by default in REG_NVMCTRL_CTRLA - no need to change the number of wait states when changing the core clock */
+#if HWREV == 1
+  /* configure XOSC1 for a 16MHz crystal connected to XIN1/XOUT1 */
+  OSCCTRL->XOSCCTRL[1].reg =
+    OSCCTRL_XOSCCTRL_STARTUP(6) |    // 1,953 ms
+    OSCCTRL_XOSCCTRL_RUNSTDBY |
+    OSCCTRL_XOSCCTRL_ENALC |
+    OSCCTRL_XOSCCTRL_IMULT(4) |
+    OSCCTRL_XOSCCTRL_IPTAT(3) |
+    OSCCTRL_XOSCCTRL_XTALEN |
+    OSCCTRL_XOSCCTRL_ENABLE;
+  while(0 == OSCCTRL->STATUS.bit.XOSCRDY1);
+
+  OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 8, input = XOSC1 */
+  OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */
+  OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE;
+  while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */
+
+  OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 16, input = XOSC1 */
+  OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */
+  OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE;
+  while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */
+#else // HWREV >= 1
+  /* configure XOSC0 for a 16MHz crystal connected to XIN0/XOUT0 */
+  OSCCTRL->XOSCCTRL[0].reg =
+      OSCCTRL_XOSCCTRL_STARTUP(6) |    // 1,953 ms
+      OSCCTRL_XOSCCTRL_RUNSTDBY |
+      OSCCTRL_XOSCCTRL_ENALC |
+      OSCCTRL_XOSCCTRL_IMULT(4) |
+      OSCCTRL_XOSCCTRL_IPTAT(3) |
+      OSCCTRL_XOSCCTRL_XTALEN |
+      OSCCTRL_XOSCCTRL_ENABLE;
+  while (0 == OSCCTRL->STATUS.bit.XOSCRDY0);
+
+  OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(
+      OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 8, input = XOSC1 */
+  OSCCTRL->Dpll[0].DPLLRATIO.reg =
+      OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */
+  OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE;
+  while (0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */
+
+  OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(
+      OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 16, input = XOSC1 */
+  OSCCTRL->Dpll[1].DPLLRATIO.reg =
+      OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */
+  OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE;
+  while (0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */
+#endif // HWREV
+
+  /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */
+  GCLK->GENCTRL[0].reg =
+      GCLK_GENCTRL_DIV(0) |
+      GCLK_GENCTRL_RUNSTDBY |
+      GCLK_GENCTRL_GENEN |
+      GCLK_GENCTRL_SRC_DPLL0 |  /* DPLL0 */
+      GCLK_GENCTRL_IDC;
+  while (1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */
+
+  /* configure clock-generator 1 to use DPLL1 as source -> for use with some peripheral */
+  GCLK->GENCTRL[1].reg =
+      GCLK_GENCTRL_DIV(0) |
+      GCLK_GENCTRL_RUNSTDBY |
+      GCLK_GENCTRL_GENEN |
+      GCLK_GENCTRL_SRC_DPLL1 |
+      GCLK_GENCTRL_IDC;
+  while (1 == GCLK->SYNCBUSY.bit.GENCTRL1); /* wait for the synchronization between clock domains to be complete */
+
+  /* configure clock-generator 2 to use DPLL0 as source -> for use with SERCOM */
+  GCLK->GENCTRL[2].reg =
+      GCLK_GENCTRL_DIV(1) |  /* 80MHz */
+      GCLK_GENCTRL_RUNSTDBY |
+      GCLK_GENCTRL_GENEN |
+      GCLK_GENCTRL_SRC_DPLL0 |
+      GCLK_GENCTRL_IDC;
+  while (1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */
+}
+
+static inline void uart_init(void) {
+#if HWREV < 3
+  /* configure SERCOM5 on PB02 */
+  PORT->Group[1].WRCONFIG.reg =
+      PORT_WRCONFIG_WRPINCFG |
+      PORT_WRCONFIG_WRPMUX |
+      PORT_WRCONFIG_PMUX(3) |    /* function D */
+      PORT_WRCONFIG_DRVSTR |
+      PORT_WRCONFIG_PINMASK(0x0004) | /* PB02 */
+      PORT_WRCONFIG_PMUXEN;
+
+  MCLK->APBDMASK.bit.SERCOM5_ = 1;
+  GCLK->PCHCTRL[SERCOM5_GCLK_ID_CORE].reg =
+      GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */
+
+  SERCOM5->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */
+  while (SERCOM5->USART.SYNCBUSY.bit.ENABLE);
+
+  SERCOM5->USART.CTRLA.reg =  /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */
+      SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */
+      //    SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */
+      SERCOM_USART_CTRLA_DORD | /* LSB first */
+      SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */
+      SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */
+      SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */
+
+  SERCOM5->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */
+      SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */
+  SERCOM5->USART.CTRLC.reg = 0x00;
+  // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E
+  SERCOM5->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21);
+
+//  SERCOM5->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC;
+  SERCOM5->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */
+  while (SERCOM5->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */
+#else
+  /* configure SERCOM0 on PA08 */
+    PORT->Group[0].WRCONFIG.reg =
+      PORT_WRCONFIG_WRPINCFG |
+      PORT_WRCONFIG_WRPMUX |
+      PORT_WRCONFIG_PMUX(2) |    /* function C */
+      PORT_WRCONFIG_DRVSTR |
+      PORT_WRCONFIG_PINMASK(0x0100) | /* PA08 */
+      PORT_WRCONFIG_PMUXEN;
+
+    MCLK->APBAMASK.bit.SERCOM0_ = 1;
+    GCLK->PCHCTRL[SERCOM0_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */
+
+    SERCOM0->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */
+    while(SERCOM0->USART.SYNCBUSY.bit.ENABLE);
+
+    SERCOM0->USART.CTRLA.reg  =  /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */
+      SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */
+  //    SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */
+      SERCOM_USART_CTRLA_DORD | /* LSB first */
+      SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */
+      SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */
+      SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */
+
+    SERCOM0->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */
+      SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */
+    SERCOM0->USART.CTRLC.reg = 0x00;
+    // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E
+    SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21);
+
+  //  SERCOM0->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC;
+    SERCOM0->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */
+    while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */
+#endif
+}
+#endif
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */
diff --git a/hw/bsp/same5x/boards/d5035_01/board.mk b/hw/bsp/samd51/boards/d5035_01/board.mk
index c53411bb8..4aa6b89fe 100644
--- a/hw/bsp/same5x/boards/d5035_01/board.mk
+++ b/hw/bsp/samd51/boards/d5035_01/board.mk
@@ -1,4 +1,4 @@
-MCU = same51
+SAM_FAMILY = same51
 
 HWREV ?= 1
 
diff --git a/hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld b/hw/bsp/samd51/boards/d5035_01/same51j19a_flash.ld
index 486043f22..59afb604b 100644
--- a/hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld
+++ b/hw/bsp/samd51/boards/d5035_01/same51j19a_flash.ld
@@ -44,6 +44,8 @@ MEMORY
 /* The stack size used by the application. NOTE: you need to adjust according to your application. */
 STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x1000;
 
+ENTRY(Reset_Handler)
+
 /* Section Definitions */
 SECTIONS
 {
diff --git a/hw/bsp/samd51/boards/feather_m4_express/board.cmake b/hw/bsp/samd51/boards/feather_m4_express/board.cmake
index d83211d9e..86d12ca24 100644
--- a/hw/bsp/samd51/boards/feather_m4_express/board.cmake
+++ b/hw/bsp/samd51/boards/feather_m4_express/board.cmake
@@ -1,3 +1,5 @@
+set(SAM_FAMILY samd51)
+
 set(JLINK_DEVICE ATSAMD51J19)
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
 
diff --git a/hw/bsp/samd51/boards/feather_m4_express/board.mk b/hw/bsp/samd51/boards/feather_m4_express/board.mk
index a8a98a987..811c5f4e3 100644
--- a/hw/bsp/samd51/boards/feather_m4_express/board.mk
+++ b/hw/bsp/samd51/boards/feather_m4_express/board.mk
@@ -1,3 +1,5 @@
+SAM_FAMILY = samd51
+
 CFLAGS += -D__SAMD51J19A__
 
 LD_FILE = $(BOARD_PATH)/$(BOARD).ld
diff --git a/hw/bsp/samd51/boards/itsybitsy_m4/board.cmake b/hw/bsp/samd51/boards/itsybitsy_m4/board.cmake
index d83211d9e..86d12ca24 100644
--- a/hw/bsp/samd51/boards/itsybitsy_m4/board.cmake
+++ b/hw/bsp/samd51/boards/itsybitsy_m4/board.cmake
@@ -1,3 +1,5 @@
+set(SAM_FAMILY samd51)
+
 set(JLINK_DEVICE ATSAMD51J19)
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
 
diff --git a/hw/bsp/samd51/boards/itsybitsy_m4/board.mk b/hw/bsp/samd51/boards/itsybitsy_m4/board.mk
index 57a680e91..eba7070c1 100644
--- a/hw/bsp/samd51/boards/itsybitsy_m4/board.mk
+++ b/hw/bsp/samd51/boards/itsybitsy_m4/board.mk
@@ -1,3 +1,5 @@
+SAM_FAMILY = samd51
+
 CFLAGS += -D__SAMD51J19A__
 
 # All source paths should be relative to the top level.
diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.cmake b/hw/bsp/samd51/boards/metro_m4_express/board.cmake
index d83211d9e..86d12ca24 100644
--- a/hw/bsp/samd51/boards/metro_m4_express/board.cmake
+++ b/hw/bsp/samd51/boards/metro_m4_express/board.cmake
@@ -1,3 +1,5 @@
+set(SAM_FAMILY samd51)
+
 set(JLINK_DEVICE ATSAMD51J19)
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
 
diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.mk b/hw/bsp/samd51/boards/metro_m4_express/board.mk
index 57a680e91..eba7070c1 100644
--- a/hw/bsp/samd51/boards/metro_m4_express/board.mk
+++ b/hw/bsp/samd51/boards/metro_m4_express/board.mk
@@ -1,3 +1,5 @@
+SAM_FAMILY = samd51
+
 CFLAGS += -D__SAMD51J19A__
 
 # All source paths should be relative to the top level.
diff --git a/hw/bsp/samd51/boards/pybadge/board.cmake b/hw/bsp/samd51/boards/pybadge/board.cmake
index d83211d9e..86d12ca24 100644
--- a/hw/bsp/samd51/boards/pybadge/board.cmake
+++ b/hw/bsp/samd51/boards/pybadge/board.cmake
@@ -1,3 +1,5 @@
+set(SAM_FAMILY samd51)
+
 set(JLINK_DEVICE ATSAMD51J19)
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
 
diff --git a/hw/bsp/samd51/boards/pybadge/board.mk b/hw/bsp/samd51/boards/pybadge/board.mk
index a8a98a987..811c5f4e3 100644
--- a/hw/bsp/samd51/boards/pybadge/board.mk
+++ b/hw/bsp/samd51/boards/pybadge/board.mk
@@ -1,3 +1,5 @@
+SAM_FAMILY = samd51
+
 CFLAGS += -D__SAMD51J19A__
 
 LD_FILE = $(BOARD_PATH)/$(BOARD).ld
diff --git a/hw/bsp/samd51/boards/pyportal/board.cmake b/hw/bsp/samd51/boards/pyportal/board.cmake
index d83211d9e..86d12ca24 100644
--- a/hw/bsp/samd51/boards/pyportal/board.cmake
+++ b/hw/bsp/samd51/boards/pyportal/board.cmake
@@ -1,3 +1,5 @@
+set(SAM_FAMILY samd51)
+
 set(JLINK_DEVICE ATSAMD51J19)
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
 
diff --git a/hw/bsp/samd51/boards/pyportal/board.mk b/hw/bsp/samd51/boards/pyportal/board.mk
index a8a98a987..811c5f4e3 100644
--- a/hw/bsp/samd51/boards/pyportal/board.mk
+++ b/hw/bsp/samd51/boards/pyportal/board.mk
@@ -1,3 +1,5 @@
+SAM_FAMILY = samd51
+
 CFLAGS += -D__SAMD51J19A__
 
 LD_FILE = $(BOARD_PATH)/$(BOARD).ld
diff --git a/hw/bsp/samd51/boards/same54_xplained/board.cmake b/hw/bsp/samd51/boards/same54_xplained/board.cmake
new file mode 100644
index 000000000..4d98205bc
--- /dev/null
+++ b/hw/bsp/samd51/boards/same54_xplained/board.cmake
@@ -0,0 +1,10 @@
+set(SAM_FAMILY same54)
+
+set(JLINK_DEVICE ATSAME54P20)
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/same54p20a_flash.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    __SAME54P20A__
+    )
+endfunction()
diff --git a/hw/bsp/samd51/boards/same54_xplained/board.h b/hw/bsp/samd51/boards/same54_xplained/board.h
new file mode 100644
index 000000000..faaa52b8e
--- /dev/null
+++ b/hw/bsp/samd51/boards/same54_xplained/board.h
@@ -0,0 +1,50 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PIN               PIN_PC18
+#define LED_STATE_ON          1
+
+// Button: D5
+#define BUTTON_PIN            PIN_PB31
+#define BUTTON_STATE_ACTIVE   0
+
+// UART: SERCOM2
+//#define UART_TX_PIN           23
+//#define UART_RX_PIN           22
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */
diff --git a/hw/bsp/same5x/boards/same54_xplained/board.mk b/hw/bsp/samd51/boards/same54_xplained/board.mk
index 41cf95bfc..d10e9e34c 100644
--- a/hw/bsp/same5x/boards/same54_xplained/board.mk
+++ b/hw/bsp/samd51/boards/same54_xplained/board.mk
@@ -1,9 +1,6 @@
-MCU = same54
+SAM_FAMILY = same54
 
-CFLAGS += \
-  -DCONF_CPU_FREQUENCY=48000000 \
-  -D__SAME54P20A__ \
-  -DBOARD_NAME="\"Microchip SAM E54 Xplained Pro\""
+CFLAGS += -D__SAME54P20A__
 
 # All source paths should be relative to the top level.
 LD_FILE = $(BOARD_PATH)/same54p20a_flash.ld
diff --git a/hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld b/hw/bsp/samd51/boards/same54_xplained/same54p20a_flash.ld
index 7a7f1be46..8a9fd7d9f 100644
--- a/hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld
+++ b/hw/bsp/samd51/boards/same54_xplained/same54p20a_flash.ld
@@ -44,6 +44,8 @@ MEMORY
 /* The stack size used by the application. NOTE: you need to adjust according to your application. */
 STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x10000;
 
+ENTRY(Reset_Handler)
+
 /* Section Definitions */
 SECTIONS
 {
@@ -160,4 +162,5 @@ SECTIONS
 
     . = ALIGN(4);
     _end = . ;
+    end = .;
 }
diff --git a/hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld b/hw/bsp/samd51/boards/same54_xplained/same54p20a_sram.ld
index c768f9c9a..c88617729 100644
--- a/hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld
+++ b/hw/bsp/samd51/boards/same54_xplained/same54p20a_sram.ld
@@ -43,6 +43,8 @@ MEMORY
 /* The stack size used by the application. NOTE: you need to adjust according to your application. */
 STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x10000;
 
+ENTRY(Reset_Handler)
+
 /* Section Definitions */
 SECTIONS
 {
@@ -159,4 +161,5 @@ SECTIONS
 
     . = ALIGN(4);
     _end = . ;
+    end = .;
 }
diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c
index d56d9f695..abaee353b 100644
--- a/hw/bsp/samd51/family.c
+++ b/hw/bsp/samd51/family.c
@@ -34,8 +34,8 @@
 #pragma GCC diagnostic ignored "-Wcast-qual"
 #endif
 
-#include "hal/include/hal_gpio.h"
-#include "hal/include/hal_init.h"
+#include "hal_gpio.h"
+#include "hal_init.h"
 #include "hpl/gclk/hpl_gclk_base.h"
 #include "hpl_mclk_config.h"
 
@@ -106,9 +106,11 @@ void board_init(void) {
   gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
   gpio_set_pin_level(LED_PIN, 0);
 
+#ifdef BUTTON_PIN
   // Button init
   gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
   gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
+#endif
 
 #if CFG_TUSB_OS == OPT_OS_FREERTOS
   // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
@@ -154,7 +156,11 @@ void board_led_write(bool state) {
 
 uint32_t board_button_read(void) {
   // button is active low
+  #ifdef BUTTON_PIN
   return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1;
+  #else
+  return 0;
+  #endif
 }
 
 size_t board_get_unique_id(uint8_t id[], size_t max_len) {
@@ -194,6 +200,53 @@ uint32_t board_millis(void) {
   return system_ticks;
 }
 
+#if 0
+/* Initialize SERCOM2 for 115200 bps 8N1 using a 48 MHz clock */
+static inline void uart_init(void) {
+  gpio_set_pin_function(PIN_PB24, PINMUX_PB24D_SERCOM2_PAD1);
+  gpio_set_pin_function(PIN_PB25, PINMUX_PB25D_SERCOM2_PAD0);
+
+  MCLK->APBBMASK.bit.SERCOM2_ = 1;
+  GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN;
+
+  BOARD_SERCOM->USART.CTRLA.bit.SWRST = 1; /* reset and disable SERCOM -> enable configuration */
+  while (BOARD_SERCOM->USART.SYNCBUSY.bit.SWRST);
+
+  BOARD_SERCOM->USART.CTRLA.reg =
+      SERCOM_USART_CTRLA_SAMPR(0) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */
+      SERCOM_USART_CTRLA_SAMPA(0) | /* 16x over sampling */
+      SERCOM_USART_CTRLA_FORM(0) | /* 0x0 USART frame, 0x1 USART frame with parity, ... */
+      SERCOM_USART_CTRLA_DORD | /* LSB first */
+      SERCOM_USART_CTRLA_MODE(1) | /* 0x0 USART with external clock, 0x1 USART with internal clock */
+      SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */
+      SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */
+
+  BOARD_SERCOM->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */
+      SERCOM_USART_CTRLB_TXEN | /* transmitter enabled */
+      SERCOM_USART_CTRLB_RXEN; /* receiver enabled */
+  // BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); /* 48000000/(16*115200) = 26.041666667 */
+  BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_BAUD(63019); /* 65536*(1−16*115200/48000000) */
+
+  BOARD_SERCOM->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */
+  while (BOARD_SERCOM->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */
+}
+
+static inline void uart_send_buffer(uint8_t const* text, size_t len) {
+  for (size_t i = 0; i < len; ++i) {
+    BOARD_SERCOM->USART.DATA.reg = text[i];
+    while ((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0);
+  }
+}
+
+static inline void uart_send_str(const char* text) {
+  while (*text) {
+    BOARD_SERCOM->USART.DATA.reg = *text++;
+    while ((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0);
+  }
+}
+
+#endif
+
 #endif
 
 //--------------------------------------------------------------------+
diff --git a/hw/bsp/samd51/family.cmake b/hw/bsp/samd51/family.cmake
index 3ddd2e290..6d64a5fe4 100644
--- a/hw/bsp/samd51/family.cmake
+++ b/hw/bsp/samd51/family.cmake
@@ -1,16 +1,15 @@
 include_guard()
 
-set(SDK_DIR ${TOP}/hw/mcu/microchip/samd51)
-set(CMSIS_5 ${TOP}/lib/CMSIS_5)
-
-# include board specific
 include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
 
+set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
 # toolchain set up
 set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
 set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
-set(FAMILY_MCUS SAMD51 CACHE INTERNAL "")
+set(FAMILY_MCUS SAMD51 SAME54 CACHE INTERNAL "")
 set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -c \"set CHIPNAME samd51\" -f target/atsame5x.cfg")
 
 #------------------------------------
@@ -27,22 +26,20 @@ function(add_board_target BOARD_TARGET)
     message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined")
   endif ()
 
-  if (NOT DEFINED STARTUP_FILE_GNU)
-    set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_samd51.c)
-  endif ()
+  set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c)
   set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
 
   add_library(${BOARD_TARGET} STATIC
-    ${SDK_DIR}/gcc/system_samd51.c
+    ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c
+    ${SDK_DIR}/hal/src/hal_atomic.c
     ${SDK_DIR}/hpl/gclk/hpl_gclk.c
     ${SDK_DIR}/hpl/mclk/hpl_mclk.c
     ${SDK_DIR}/hpl/osc32kctrl/hpl_osc32kctrl.c
     ${SDK_DIR}/hpl/oscctrl/hpl_oscctrl.c
-    ${SDK_DIR}/hal/src/hal_atomic.c
     ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
     )
   target_include_directories(${BOARD_TARGET} PUBLIC
-    ${SDK_DIR}/
+    ${SDK_DIR}
     ${SDK_DIR}/config
     ${SDK_DIR}/include
     ${SDK_DIR}/hal/include
diff --git a/hw/bsp/samd51/family.mk b/hw/bsp/samd51/family.mk
index 7b90efad0..9b1a23db4 100644
--- a/hw/bsp/samd51/family.mk
+++ b/hw/bsp/samd51/family.mk
@@ -1,9 +1,10 @@
 UF2_FAMILY_ID = 0x55114460
-DEPS_SUBMODULES += hw/mcu/microchip
 
 include $(TOP)/$(BOARD_PATH)/board.mk
 CPU_CORE ?= cortex-m4
 
+SDK_DIR = hw/mcu/microchip/${SAM_FAMILY}
+
 CFLAGS += \
   -flto \
   -DCFG_TUSB_MCU=OPT_MCU_SAMD51
@@ -17,23 +18,23 @@ LDFLAGS_GCC += \
 
 SRC_C += \
 	src/portable/microchip/samd/dcd_samd.c \
-	hw/mcu/microchip/samd51/gcc/gcc/startup_samd51.c \
-	hw/mcu/microchip/samd51/gcc/system_samd51.c \
-	hw/mcu/microchip/samd51/hpl/gclk/hpl_gclk.c \
-	hw/mcu/microchip/samd51/hpl/mclk/hpl_mclk.c \
-	hw/mcu/microchip/samd51/hpl/osc32kctrl/hpl_osc32kctrl.c \
-	hw/mcu/microchip/samd51/hpl/oscctrl/hpl_oscctrl.c \
-	hw/mcu/microchip/samd51/hal/src/hal_atomic.c
+	${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c \
+	${SDK_DIR}/gcc/system_${SAM_FAMILY}.c \
+	${SDK_DIR}/hpl/gclk/hpl_gclk.c \
+	${SDK_DIR}/hpl/mclk/hpl_mclk.c \
+	${SDK_DIR}/hpl/osc32kctrl/hpl_osc32kctrl.c \
+	${SDK_DIR}/hpl/oscctrl/hpl_oscctrl.c \
+	${SDK_DIR}/hal/src/hal_atomic.c
 
 INC += \
 	$(TOP)/$(BOARD_PATH) \
-	$(TOP)/hw/mcu/microchip/samd51/ \
-	$(TOP)/hw/mcu/microchip/samd51/config \
-	$(TOP)/hw/mcu/microchip/samd51/include \
-	$(TOP)/hw/mcu/microchip/samd51/hal/include \
-	$(TOP)/hw/mcu/microchip/samd51/hal/utils/include \
-	$(TOP)/hw/mcu/microchip/samd51/hpl/port \
-	$(TOP)/hw/mcu/microchip/samd51/hri \
+	$(TOP)/${SDK_DIR} \
+	$(TOP)/${SDK_DIR}/config \
+	$(TOP)/${SDK_DIR}/include \
+	$(TOP)/${SDK_DIR}/hal/include \
+	$(TOP)/${SDK_DIR}/hal/utils/include \
+	$(TOP)/${SDK_DIR}/hpl/port \
+	$(TOP)/${SDK_DIR}/hri \
 	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
 
 # flash using bossac at least version 1.8
@@ -44,3 +45,7 @@ BOSSAC = bossac
 flash-bossac: $(BUILD)/$(PROJECT).bin
 	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
 	$(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R
+
+# flash using edbg from https://github.com/ataradov/edbg
+flash-edbg: $(BUILD)/$(PROJECT).bin
+	edbg --verbose -t $(MCU) -pv -f $<
diff --git a/hw/bsp/same5x/boards/d5035_01/d5035_01.c b/hw/bsp/same5x/boards/d5035_01/d5035_01.c
deleted file mode 100644
index eb5768d0d..000000000
--- a/hw/bsp/same5x/boards/d5035_01/d5035_01.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2020 Jean Gressmann <[email protected]>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <sam.h>
-#include "bsp/board_api.h"
-
-#include <hal/include/hal_gpio.h>
-
-#if CONF_CPU_FREQUENCY != 80000000
-#	error "CONF_CPU_FREQUENCY" must 80000000
-#endif
-
-#if CONF_GCLK_USB_FREQUENCY != 48000000
-#	error "CONF_GCLK_USB_FREQUENCY" must 48000000
-#endif
-
-#if !defined(HWREV)
-#	error Define "HWREV"
-#endif
-
-//--------------------------------------------------------------------+
-// Forward USB interrupt events to TinyUSB IRQ Handler
-//--------------------------------------------------------------------+
-void USB_0_Handler (void)
-{
-	tud_int_handler(0);
-}
-
-void USB_1_Handler (void)
-{
-	tud_int_handler(0);
-}
-
-void USB_2_Handler (void)
-{
-	tud_int_handler(0);
-}
-
-void USB_3_Handler (void)
-{
-	tud_int_handler(0);
-}
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-#define LED_PIN PIN_PA02
-
-#if HWREV < 3
-# define BOARD_SERCOM SERCOM5
-#else
-# define BOARD_SERCOM SERCOM0
-#endif
-
-static inline void init_clock(void)
-{
-	/* AUTOWS is enabled by default in REG_NVMCTRL_CTRLA - no need to change the number of wait states when changing the core clock */
-#if HWREV == 1
-	/* configure XOSC1 for a 16MHz crystal connected to XIN1/XOUT1 */
-	OSCCTRL->XOSCCTRL[1].reg =
-		OSCCTRL_XOSCCTRL_STARTUP(6) |    // 1,953 ms
-		OSCCTRL_XOSCCTRL_RUNSTDBY |
-		OSCCTRL_XOSCCTRL_ENALC |
-		OSCCTRL_XOSCCTRL_IMULT(4) |
-		OSCCTRL_XOSCCTRL_IPTAT(3) |
-		OSCCTRL_XOSCCTRL_XTALEN |
-		OSCCTRL_XOSCCTRL_ENABLE;
-	while(0 == OSCCTRL->STATUS.bit.XOSCRDY1);
-
-	OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 8, input = XOSC1 */
-	OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */
-	OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE;
-	while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */
-
-	OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 16, input = XOSC1 */
-	OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */
-	OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE;
-	while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */
-#else // HWREV >= 1
-	/* configure XOSC0 for a 16MHz crystal connected to XIN0/XOUT0 */
-	OSCCTRL->XOSCCTRL[0].reg =
-		OSCCTRL_XOSCCTRL_STARTUP(6) |    // 1,953 ms
-		OSCCTRL_XOSCCTRL_RUNSTDBY |
-		OSCCTRL_XOSCCTRL_ENALC |
-		OSCCTRL_XOSCCTRL_IMULT(4) |
-		OSCCTRL_XOSCCTRL_IPTAT(3) |
-		OSCCTRL_XOSCCTRL_XTALEN |
-		OSCCTRL_XOSCCTRL_ENABLE;
-	while(0 == OSCCTRL->STATUS.bit.XOSCRDY0);
-
-	OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 8, input = XOSC1 */
-	OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */
-	OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE;
-	while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */
-
-	OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 16, input = XOSC1 */
-	OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */
-	OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE;
-	while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */
-#endif // HWREV
-
-	/* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */
-	GCLK->GENCTRL[0].reg =
-		GCLK_GENCTRL_DIV(0) |
-		GCLK_GENCTRL_RUNSTDBY |
-		GCLK_GENCTRL_GENEN |
-		GCLK_GENCTRL_SRC_DPLL0 |  /* DPLL0 */
-		GCLK_GENCTRL_IDC ;
-	while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */
-
-	/* configure clock-generator 1 to use DPLL1 as source -> for use with some peripheral */
-	GCLK->GENCTRL[1].reg =
-		GCLK_GENCTRL_DIV(0) |
-		GCLK_GENCTRL_RUNSTDBY |
-		GCLK_GENCTRL_GENEN |
-		GCLK_GENCTRL_SRC_DPLL1 |
-		GCLK_GENCTRL_IDC ;
-	while(1 == GCLK->SYNCBUSY.bit.GENCTRL1); /* wait for the synchronization between clock domains to be complete */
-
-	/* configure clock-generator 2 to use DPLL0 as source -> for use with SERCOM */
-	GCLK->GENCTRL[2].reg =
-		GCLK_GENCTRL_DIV(1) |	/* 80MHz */
-		GCLK_GENCTRL_RUNSTDBY |
-		GCLK_GENCTRL_GENEN |
-		GCLK_GENCTRL_SRC_DPLL0 |
-		GCLK_GENCTRL_IDC ;
-	while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */
-}
-
-static inline void uart_init(void)
-{
-#if HWREV < 3
-	/* configure SERCOM5 on PB02 */
-	PORT->Group[1].WRCONFIG.reg =
-		PORT_WRCONFIG_WRPINCFG |
-		PORT_WRCONFIG_WRPMUX |
-		PORT_WRCONFIG_PMUX(3) |    /* function D */
-		PORT_WRCONFIG_DRVSTR |
-		PORT_WRCONFIG_PINMASK(0x0004) | /* PB02 */
-		PORT_WRCONFIG_PMUXEN;
-
-	MCLK->APBDMASK.bit.SERCOM5_ = 1;
-	GCLK->PCHCTRL[SERCOM5_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */
-
-	SERCOM5->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */
-	while(SERCOM5->USART.SYNCBUSY.bit.ENABLE);
-
-	SERCOM5->USART.CTRLA.reg  =  /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */
-		SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */
-//    SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */
-		SERCOM_USART_CTRLA_DORD | /* LSB first */
-		SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */
-		SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */
-		SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */
-
-	SERCOM5->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */
-		SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */
-	SERCOM5->USART.CTRLC.reg = 0x00;
-	// 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E
-	SERCOM5->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21);
-
-//  SERCOM5->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC;
-	SERCOM5->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */
-	while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */
-#else
-/* configure SERCOM0 on PA08 */
-	PORT->Group[0].WRCONFIG.reg =
-		PORT_WRCONFIG_WRPINCFG |
-		PORT_WRCONFIG_WRPMUX |
-		PORT_WRCONFIG_PMUX(2) |    /* function C */
-		PORT_WRCONFIG_DRVSTR |
-		PORT_WRCONFIG_PINMASK(0x0100) | /* PA08 */
-		PORT_WRCONFIG_PMUXEN;
-
-	MCLK->APBAMASK.bit.SERCOM0_ = 1;
-	GCLK->PCHCTRL[SERCOM0_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */
-
-	SERCOM0->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */
-	while(SERCOM0->USART.SYNCBUSY.bit.ENABLE);
-
-	SERCOM0->USART.CTRLA.reg  =  /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */
-		SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */
-//    SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */
-		SERCOM_USART_CTRLA_DORD | /* LSB first */
-		SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */
-		SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */
-		SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */
-
-	SERCOM0->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */
-		SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */
-	SERCOM0->USART.CTRLC.reg = 0x00;
-	// 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E
-	SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21);
-
-//  SERCOM0->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC;
-	SERCOM0->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */
-	while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */
-#endif
-}
-
-static inline void uart_send_buffer(uint8_t const *text, size_t len)
-{
-	for (size_t i = 0; i < len; ++i) {
-		BOARD_SERCOM->USART.DATA.reg = text[i];
-		while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0);
-	}
-}
-
-static inline void uart_send_str(const char* text)
-{
-	while (*text) {
-		BOARD_SERCOM->USART.DATA.reg = *text++;
-		while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0);
-	}
-}
-
-
-void board_init(void)
-{
-	init_clock();
-
-	SystemCoreClock = CONF_CPU_FREQUENCY;
-
-#if CFG_TUSB_OS  == OPT_OS_NONE
-	SysTick_Config(CONF_CPU_FREQUENCY / 1000);
-#endif
-
-	uart_init();
-#if CFG_TUSB_DEBUG >= 2
-	uart_send_str(BOARD_NAME " UART initialized\n");
-	tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg);
-#endif
-
-	// Led init
-	gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
-	gpio_set_pin_level(LED_PIN, 0);
-
-#if CFG_TUSB_DEBUG >= 2
-	uart_send_str(BOARD_NAME " LED pin configured\n");
-#endif
-
-#if CFG_TUSB_OS == OPT_OS_FREERTOS
-	// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-	NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-	NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-	NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-	NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-#endif
-
-
-#if CFG_TUD_ENABLED
-#if CFG_TUSB_DEBUG >= 2
-	uart_send_str(BOARD_NAME " USB device enabled\n");
-#endif
-
-	/* USB clock init
-	 * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock
-	 * for low speed and full speed operation. */
-	hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN);
-	hri_mclk_set_AHBMASK_USB_bit(MCLK);
-	hri_mclk_set_APBBMASK_USB_bit(MCLK);
-
-	// USB pin init
-	gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT);
-	gpio_set_pin_level(PIN_PA24, false);
-	gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF);
-	gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT);
-	gpio_set_pin_level(PIN_PA25, false);
-	gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF);
-
-	gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM);
-	gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP);
-
-
-#if CFG_TUSB_DEBUG >= 2
-	uart_send_str(BOARD_NAME " USB device configured\n");
-#endif
-#endif
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-	gpio_set_pin_level(LED_PIN, state);
-}
-
-uint32_t board_button_read(void)
-{
-	// this board has no button
-	return 0;
-}
-
-int board_uart_read(uint8_t* buf, int len)
-{
-	(void) buf; (void) len;
-	return 0;
-}
-
-int board_uart_write(void const * buf, int len)
-{
-	if (len < 0) {
-		uart_send_str(buf);
-	} else {
-		uart_send_buffer(buf, len);
-	}
-	return len;
-}
-
-#if CFG_TUSB_OS  == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-
-void SysTick_Handler(void)
-{
-	system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-	return system_ticks;
-}
-#endif
-
-// Required by __libc_init_array in startup code if we are compiling using
-// -nostdlib/-nostartfiles.
-void _init(void)
-{
-
-}
diff --git a/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c b/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c
deleted file mode 100644
index 93adea63e..000000000
--- a/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2021 Jean Gressmann <[email protected]>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <sam.h>
-#include "bsp/board_api.h"
-
-#include <hal/include/hal_gpio.h>
-
-
-//--------------------------------------------------------------------+
-// Forward USB interrupt events to TinyUSB IRQ Handler
-//--------------------------------------------------------------------+
-void USB_0_Handler(void)
-{
-	tud_int_handler(0);
-}
-
-void USB_1_Handler(void)
-{
-	tud_int_handler(0);
-}
-
-void USB_2_Handler(void)
-{
-	tud_int_handler(0);
-}
-
-void USB_3_Handler(void)
-{
-	tud_int_handler(0);
-}
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-#define LED_PIN PIN_PC18
-#define BUTTON_PIN PIN_PB31
-#define BOARD_SERCOM SERCOM2
-
-/** Initializes the clocks from the external 12 MHz crystal
- *
- * The goal of this setup is to preserve the second PLL
- * for the application code while still having a reasonable
- * 48 MHz clock for USB / UART.
- *
- * GCLK0:   CONF_CPU_FREQUENCY (default 120 MHz) from PLL0
- * GCLK1:   unused
- * GCLK2:   12 MHz from XOSC1
- * DFLL48M: closed loop from GLCK2
- * GCLK3:   48 MHz
- */
-static inline void init_clock_xtal(void)
-{
-	/* configure for a 12MHz crystal connected to XIN1/XOUT1 */
-	OSCCTRL->XOSCCTRL[1].reg =
-		OSCCTRL_XOSCCTRL_STARTUP(6) | // 1.953 ms
-		OSCCTRL_XOSCCTRL_RUNSTDBY |
-		OSCCTRL_XOSCCTRL_ENALC |
-		OSCCTRL_XOSCCTRL_IMULT(4) | OSCCTRL_XOSCCTRL_IPTAT(3) | // 8MHz to 16MHz
-		OSCCTRL_XOSCCTRL_XTALEN |
-		OSCCTRL_XOSCCTRL_ENABLE;
-	while(0 == OSCCTRL->STATUS.bit.XOSCRDY1);
-
-	OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(2) | OSCCTRL_DPLLCTRLB_REFCLK_XOSC1; /* 12MHz / 6 = 2Mhz, input = XOSC1 */
-	OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR((CONF_CPU_FREQUENCY / 1000000 / 2) - 1); /* multiply to get CONF_CPU_FREQUENCY (default = 120MHz) */
-	OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE;
-	while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */
-
-	/* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */
-	GCLK->GENCTRL[0].reg =
-		GCLK_GENCTRL_DIV(0) |
-		GCLK_GENCTRL_RUNSTDBY |
-		GCLK_GENCTRL_GENEN |
-		GCLK_GENCTRL_SRC_DPLL0 |
-		GCLK_GENCTRL_IDC;
-	while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */
-
-	// configure GCLK2 for 12MHz from XOSC1
-	GCLK->GENCTRL[2].reg =
-		GCLK_GENCTRL_DIV(0) |
-		GCLK_GENCTRL_RUNSTDBY |
-		GCLK_GENCTRL_GENEN |
-		GCLK_GENCTRL_SRC_XOSC1 |
-		GCLK_GENCTRL_IDC;
-	while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */
-
-	 /* setup DFLL48M to use GLCK2 */
-	GCLK->PCHCTRL[OSCCTRL_GCLK_ID_DFLL48].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN;
-
-	OSCCTRL->DFLLCTRLA.reg = 0;
-	while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE);
-
-	OSCCTRL->DFLLCTRLB.reg = OSCCTRL_DFLLCTRLB_MODE | OSCCTRL_DFLLCTRLB_WAITLOCK;
-	OSCCTRL->DFLLMUL.bit.MUL = 4; // 4 * 12MHz -> 48MHz
-
-	OSCCTRL->DFLLCTRLA.reg =
-		OSCCTRL_DFLLCTRLA_ENABLE |
-		OSCCTRL_DFLLCTRLA_RUNSTDBY;
-	while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE);
-
-	// setup 48 MHz GCLK3 from DFLL48M
-	GCLK->GENCTRL[3].reg =
-		GCLK_GENCTRL_DIV(0) |
-		GCLK_GENCTRL_RUNSTDBY |
-		GCLK_GENCTRL_GENEN |
-		GCLK_GENCTRL_SRC_DFLL |
-		GCLK_GENCTRL_IDC;
-	while(1 == GCLK->SYNCBUSY.bit.GENCTRL3);
-}
-
-/* Initialize SERCOM2 for 115200 bps 8N1 using a 48 MHz clock */
-static inline void uart_init(void)
-{
-	gpio_set_pin_function(PIN_PB24, PINMUX_PB24D_SERCOM2_PAD1);
-	gpio_set_pin_function(PIN_PB25, PINMUX_PB25D_SERCOM2_PAD0);
-
-	MCLK->APBBMASK.bit.SERCOM2_ = 1;
-	GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN;
-
-	BOARD_SERCOM->USART.CTRLA.bit.SWRST = 1; /* reset and disable SERCOM -> enable configuration */
-	while (BOARD_SERCOM->USART.SYNCBUSY.bit.SWRST);
-
-	BOARD_SERCOM->USART.CTRLA.reg  =
-		SERCOM_USART_CTRLA_SAMPR(0) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */
-		SERCOM_USART_CTRLA_SAMPA(0) | /* 16x over sampling */
-		SERCOM_USART_CTRLA_FORM(0) | /* 0x0 USART frame, 0x1 USART frame with parity, ... */
-		SERCOM_USART_CTRLA_DORD | /* LSB first */
-		SERCOM_USART_CTRLA_MODE(1) | /* 0x0 USART with external clock, 0x1 USART with internal clock */
-		SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */
-		SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */
-
-	BOARD_SERCOM->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */
-		SERCOM_USART_CTRLB_TXEN | /* transmitter enabled */
-		SERCOM_USART_CTRLB_RXEN; /* receiver enabled */
-	// BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); /* 48000000/(16*115200) = 26.041666667 */
-	BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_BAUD(63019); /* 65536*(1−16*115200/48000000) */
-
-	BOARD_SERCOM->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */
-	while (BOARD_SERCOM->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */
-}
-
-static inline void uart_send_buffer(uint8_t const *text, size_t len)
-{
-	for (size_t i = 0; i < len; ++i) {
-		BOARD_SERCOM->USART.DATA.reg = text[i];
-		while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0);
-	}
-}
-
-static inline void uart_send_str(const char* text)
-{
-	while (*text) {
-		BOARD_SERCOM->USART.DATA.reg = *text++;
-		while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0);
-	}
-}
-
-
-void board_init(void)
-{
-	// Uncomment this line and change the GCLK for UART/USB to run off the XTAL.
-	// init_clock_xtal();
-
-	SystemCoreClock = CONF_CPU_FREQUENCY;
-
-#if CFG_TUSB_OS  == OPT_OS_NONE
-	SysTick_Config(CONF_CPU_FREQUENCY / 1000);
-#endif
-
-	uart_init();
-
-#if CFG_TUSB_DEBUG >= 2
-	uart_send_str(BOARD_NAME " UART initialized\n");
-	tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg);
-#endif
-
-	// LED0 init
-	gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF);
-	gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
-	board_led_write(0);
-
-#if CFG_TUSB_DEBUG >= 2
-	uart_send_str(BOARD_NAME " LED pin configured\n");
-#endif
-
-	// BTN0 init
-	gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF);
-	gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
-	gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
-
-#if CFG_TUSB_DEBUG >= 2
-	uart_send_str(BOARD_NAME " Button pin configured\n");
-#endif
-
-#if CFG_TUSB_OS == OPT_OS_FREERTOS
-	// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-	NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-	NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-	NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-	NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-#endif
-
-
-#if CFG_TUD_ENABLED
-#if CFG_TUSB_DEBUG >= 2
-	uart_send_str(BOARD_NAME " USB device enabled\n");
-#endif
-
-	/* USB clock init
-	 * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock
-	 * for low speed and full speed operation.
-	 */
-	hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK0_Val | GCLK_PCHCTRL_CHEN);
-	hri_mclk_set_AHBMASK_USB_bit(MCLK);
-	hri_mclk_set_APBBMASK_USB_bit(MCLK);
-
-	// USB pin init
-	gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT);
-	gpio_set_pin_level(PIN_PA24, false);
-	gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF);
-	gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT);
-	gpio_set_pin_level(PIN_PA25, false);
-	gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF);
-
-	gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM);
-	gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP);
-
-
-#if CFG_TUSB_DEBUG >= 2
-	uart_send_str(BOARD_NAME " USB device configured\n");
-#endif
-#endif
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-	gpio_set_pin_level(LED_PIN, !state);
-}
-
-uint32_t board_button_read(void)
-{
-	return (PORT->Group[1].IN.reg & 0x80000000) != 0x80000000;
-}
-
-int board_uart_read(uint8_t* buf, int len)
-{
-  (void) buf; (void) len;
-  return 0;
-}
-
-int board_uart_write(void const * buf, int len)
-{
-	if (len < 0) {
-		uart_send_str(buf);
-	} else {
-		uart_send_buffer(buf, len);
-	}
-	return len;
-}
-
-#if CFG_TUSB_OS  == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-
-void SysTick_Handler(void)
-{
-	system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-	return system_ticks;
-}
-#endif
-
-// Required by __libc_init_array in startup code if we are compiling using
-// -nostdlib/-nostartfiles.
-void _init(void)
-{
-
-}
diff --git a/hw/bsp/same5x/family.mk b/hw/bsp/same5x/family.mk
deleted file mode 100644
index b2bf0d359..000000000
--- a/hw/bsp/same5x/family.mk
+++ /dev/null
@@ -1,38 +0,0 @@
-DEPS_SUBMODULES += hw/mcu/microchip
-
-SDK_DIR = hw/mcu/microchip/$(MCU)
-include $(TOP)/$(BOARD_PATH)/board.mk
-CPU_CORE ?= cortex-m4
-
-CFLAGS += \
-  -mthumb \
-  -mlong-calls \
-  -nostdlib -nostartfiles \
-  -DCFG_TUSB_MCU=OPT_MCU_SAME5X
-
-# SAM driver is flooded with -Wcast-qual which slow down complication significantly
-CFLAGS_SKIP += -Wcast-qual
-
-LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs
-
-SRC_C += \
-  src/portable/microchip/samd/dcd_samd.c \
-  $(SDK_DIR)/gcc/gcc/startup_$(MCU).c \
-  $(SDK_DIR)/gcc/system_$(MCU).c \
-  $(SDK_DIR)/hal/utils/src/utils_syscalls.c
-
-INC += \
-	$(TOP)/$(SDK_DIR) \
-	$(TOP)/$(SDK_DIR)/config \
-	$(TOP)/$(SDK_DIR)/include \
-	$(TOP)/$(SDK_DIR)/hal/include \
-	$(TOP)/$(SDK_DIR)/hal/utils/include \
-	$(TOP)/$(SDK_DIR)/hpl/port \
-	$(TOP)/$(SDK_DIR)/hri \
-	$(TOP)/$(SDK_DIR)/CMSIS/Include
-
-# flash using edbg from https://github.com/ataradov/edbg
-flash-edbg: $(BUILD)/$(PROJECT).bin
-	edbg --verbose -t $(MCU) -pv -f $<
-
-flash: flash-edbg
diff --git a/hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake b/hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake
index 6312ff89d..874b741cc 100644
--- a/hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake
+++ b/hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake
@@ -1,4 +1,4 @@
-set(MCU_VARIANT saml21)
+set(SAM_FAMILY saml21)
 set(JLINK_DEVICE ATSAML21J18)
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/saml21j18b_flash.ld)
 
diff --git a/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk b/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk
index 75179fc58..4ebfa7e71 100644
--- a/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk
+++ b/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk
@@ -1,4 +1,4 @@
-MCU_VARIANT = saml21
+SAM_FAMILY = saml21
 
 CFLAGS += -D__SAML21J18B__
 
diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.cmake b/hw/bsp/saml2x/boards/saml22_feather/board.cmake
index 7db751e45..7fd79d2ce 100644
--- a/hw/bsp/saml2x/boards/saml22_feather/board.cmake
+++ b/hw/bsp/saml2x/boards/saml22_feather/board.cmake
@@ -1,4 +1,4 @@
-set(MCU_VARIANT saml22)
+set(SAM_FAMILY saml22)
 set(JLINK_DEVICE ATSAML22J18)
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
 
diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.mk b/hw/bsp/saml2x/boards/saml22_feather/board.mk
index 76d86de25..c7817ff70 100644
--- a/hw/bsp/saml2x/boards/saml22_feather/board.mk
+++ b/hw/bsp/saml2x/boards/saml22_feather/board.mk
@@ -1,4 +1,4 @@
-MCU_VARIANT = saml22
+SAM_FAMILY = saml22
 
 CFLAGS += -D__SAML22J18A__
 
diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake b/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake
index 162ef127b..67d26475f 100644
--- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake
+++ b/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake
@@ -1,4 +1,4 @@
-set(MCU_VARIANT saml22)
+set(SAM_FAMILY saml22)
 set(JLINK_DEVICE ATSAML21J18)
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
 
diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk b/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk
index 76d86de25..c7817ff70 100644
--- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk
+++ b/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk
@@ -1,4 +1,4 @@
-MCU_VARIANT = saml22
+SAM_FAMILY = saml22
 
 CFLAGS += -D__SAML22J18A__
 
diff --git a/hw/bsp/saml2x/family.cmake b/hw/bsp/saml2x/family.cmake
index d8a62aef3..8390cdc9c 100644
--- a/hw/bsp/saml2x/family.cmake
+++ b/hw/bsp/saml2x/family.cmake
@@ -3,7 +3,7 @@ include_guard()
 # include board specific
 include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
 
-set(SDK_DIR ${TOP}/hw/mcu/microchip/${MCU_VARIANT})
+set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY})
 set(CMSIS_5 ${TOP}/lib/CMSIS_5)
 
 # toolchain set up
@@ -27,11 +27,11 @@ function(add_board_target BOARD_TARGET)
     message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined")
   endif ()
 
-  set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${MCU_VARIANT}.c)
+  set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c)
   set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
 
   add_library(${BOARD_TARGET} STATIC
-    ${SDK_DIR}/gcc/system_${MCU_VARIANT}.c
+    ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c
     ${SDK_DIR}/hal/src/hal_atomic.c
     ${SDK_DIR}/hpl/gclk/hpl_gclk.c
     ${SDK_DIR}/hpl/mclk/hpl_mclk.c
diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk
index e01d7522e..65dfe5032 100644
--- a/hw/bsp/saml2x/family.mk
+++ b/hw/bsp/saml2x/family.mk
@@ -1,5 +1,5 @@
 UF2_FAMILY_ID = 0x68ed2b88
-SDK_DIR = hw/mcu/microchip/$(MCU_VARIANT)
+SDK_DIR = hw/mcu/microchip/$(SAM_FAMILY)
 
 include $(TOP)/$(BOARD_PATH)/board.mk
 CPU_CORE ?= cortex-m0plus
@@ -22,8 +22,8 @@ LDFLAGS_GCC += \
 
 SRC_C += \
 	src/portable/microchip/samd/dcd_samd.c \
-	$(SDK_DIR)/gcc/gcc/startup_$(MCU_VARIANT).c \
-	$(SDK_DIR)/gcc/system_$(MCU_VARIANT).c \
+	$(SDK_DIR)/gcc/gcc/startup_$(SAM_FAMILY).c \
+	$(SDK_DIR)/gcc/system_$(SAM_FAMILY).c \
 	$(SDK_DIR)/hal/src/hal_atomic.c \
 	$(SDK_DIR)/hpl/gclk/hpl_gclk.c \
 	$(SDK_DIR)/hpl/mclk/hpl_mclk.c \