diff options
| author | hathach <[email protected]> | 2021-10-13 17:31:57 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2021-10-13 17:32:34 +0700 |
| commit | 5cfe2930012d1dbec85e0923e0eda2d9aec867e6 (patch) | |
| tree | 0cb085ef234c696baab7ebd291e3ae4d7e386837 | |
| parent | 9da234cd7c73786624970206d7b7b7361275a6b7 (diff) | |
update changelog and increase version for 0.12.0
| -rw-r--r-- | CONTRIBUTORS.rst | 3 | ||||
| -rw-r--r-- | docs/info/changelog.rst | 33 | ||||
| -rw-r--r-- | docs/reference/getting_started.rst | 2 | ||||
| -rw-r--r-- | src/tusb_option.h | 2 |
4 files changed, 35 insertions, 5 deletions
diff --git a/CONTRIBUTORS.rst b/CONTRIBUTORS.rst index 121d37789..55a291222 100644 --- a/CONTRIBUTORS.rst +++ b/CONTRIBUTORS.rst @@ -177,8 +177,7 @@ Notable contributors - Add new DCD port for Synopsys DesignWare for STM32 L4, F2, F4, F7, H7 etc ... - Add new DCD port for TI MSP430 -- Board support for STM32F407 Discovery, STM32H743 Nucleo, pyboard - v1.1, msp\_exp430f5529lp etc ... +- Board support for STM32F407 Discovery, STM32H743 Nucleo, pyboard v1.1, msp\_exp430f5529lp etc ... `Zixun Li <https://github.com/HiFiPhile>`__ diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index 4325ff2ca..4cb30799c 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -2,6 +2,37 @@ Changelog ********* +0.12.0 +====== + +- add CFG_TUSB_OS_INC_PATH for os include path + +Device Controller Driver (DCD) +------------------------------ + +- Getting device stack to pass USB Compliance Verification test (chapter9, HID, MSC). Ports are tested: + nRF, SAMD 21/51, rp2040, stm32f4, Renesas RX, iMXRT, ESP32-S2/3, Kinetic KL25/32 +- Added dcd_edpt_close_all() for switching configuration +- [Transdimension] Support dcd_edpt_xfer_fifo() with auto wrap over if fifo buffer is 4K aligned and size is multiple of 4K. +- [Da146xx] Improve vbus, reset, suspend, resume detection, and remote wakeup. + +Device Stack +------------ + +- Add new network driver Network Control Model (CDC-NCM), update net_lwip_webserver to work with NCM (need re-configure example) +- Add new USB Video Class UVC 1.5 driver and video_capture example ((work in progress) +- Fix potential buffer overflow for HID, bluetooth drivers + +Host Controller Driver (HCD) +---------------------------- + +No notable changes + +Host Stack +---------- + +No notable changes + 0.11.0 (2021-08-29) =================== @@ -26,7 +57,7 @@ Synopsys ^^^^^^^^ - Fix Synopsys set address bug which could cause re-enumeration failed -- Fix for dcd_synopsys driver integer overflow in HS mode (issue #968) +- Fix dcd_synopsys driver integer overflow in HS mode (issue #968) nRF5x ^^^^^ diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 044792993..875372c81 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -122,7 +122,7 @@ Logger By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: -* `LOGGER=rtt`: use [Segger RTT protocol](https://www.segger.com/products/debug-probes/j-link/technology/about-real-time-transfer/) +* `LOGGER=rtt`: use `Segger RTT protocol <https://www.segger.com/products/debug-probes/j-link/technology/about-real-time-transfer/>`_ * Cons: requires jlink as the debugger. * Pros: work with most if not all MCUs diff --git a/src/tusb_option.h b/src/tusb_option.h index b2ebfdf66..e49fc0119 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -28,7 +28,7 @@ #define _TUSB_OPTION_H_ #define TUSB_VERSION_MAJOR 0 -#define TUSB_VERSION_MINOR 11 +#define TUSB_VERSION_MINOR 12 #define TUSB_VERSION_REVISION 0 #define TUSB_VERSION_STRING TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION) |