add OPT_MODE_HIGH_SPEED

4 files changed, 28 insertions, 11 deletions

diff --git a/examples/device/cdc_msc_hid/src/tusb_config.h b/examples/device/cdc_msc_hid/src/tusb_config.h
index 0aa023352..0634c9576 100644
--- a/examples/device/cdc_msc_hid/src/tusb_config.h
+++ b/examples/device/cdc_msc_hid/src/tusb_config.h
@@ -55,7 +55,12 @@
   #error CFG_TUSB_MCU should be defined using compiler flags
 #endif
 
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+#else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
+#endif
+
 #define CFG_TUSB_DEBUG              2
 #define CFG_TUSB_OS                 OPT_OS_NONE
 
@@ -121,7 +126,6 @@
 //--------------------------------------------------------------------
 // MSC
 //--------------------------------------------------------------------
-
 // Number of supported Logical Unit Number (At least 1)
 #define CFG_TUD_MSC_MAXLUN          1
 
diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h
index c4476f56f..b268830ca 100644
--- a/src/class/msc/msc_device.h
+++ b/src/class/msc/msc_device.h
@@ -73,8 +73,12 @@ TU_VERIFY_STATIC(CFG_TUD_MSC_BUFSIZE < UINT16_MAX, "Size is not correct");
 

 // TODO highspeed device is 512

 #ifndef CFG_TUD_MSC_EPSIZE

+#if TUD_OPT_HIGH_SPEED

+#define CFG_TUD_MSC_EPSIZE 512

+#else

 #define CFG_TUD_MSC_EPSIZE 64

 #endif

+#endif

 

 

 #ifdef __cplusplus

diff --git a/src/portable/nxp/lpc43xx_lpc18xx/dcd_lpc43xx.c b/src/portable/nxp/lpc43xx_lpc18xx/dcd_lpc43xx.c
index 2f83f4203..260cc3a45 100644
--- a/src/portable/nxp/lpc43xx_lpc18xx/dcd_lpc43xx.c
+++ b/src/portable/nxp/lpc43xx_lpc18xx/dcd_lpc43xx.c
@@ -288,7 +288,7 @@ bool dcd_edpt_busy(uint8_t rhport, uint8_t ep_addr)
 //  return !p_qhd->qtd_overlay.halted && p_qhd->qtd_overlay.active;

 }

 

-bool  dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)

+bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)

 {

   uint8_t const epnum = edpt_number(ep_addr);

   uint8_t const dir   = edpt_dir(ep_addr);

@@ -301,9 +301,8 @@ bool  dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
     while(LPC_USB[rhport]->ENDPTSETUPSTAT & BIT_(0)) {}

   }

 

-  dcd_data_t* p_dcd = dcd_data_ptr[rhport];

-  dcd_qhd_t * p_qhd = &p_dcd->qhd[ep_idx];

-  dcd_qtd_t * p_qtd = &p_dcd->qtd[ep_idx];

+  dcd_qhd_t * p_qhd = &dcd_data_ptr[rhport]->qhd[ep_idx];

+  dcd_qtd_t * p_qtd = &dcd_data_ptr[rhport]->qtd[ep_idx];

 

   //------------- Prepare qtd -------------//

   qtd_init(p_qtd, buffer, total_bytes);

diff --git a/src/tusb_option.h b/src/tusb_option.h
index 18e1e245e..b64a61e42 100644
--- a/src/tusb_option.h
+++ b/src/tusb_option.h
@@ -83,13 +83,16 @@
 

 //--------------------------------------------------------------------

 // CONTROLLER

+// Only 1 roothub port can be configured to be device and/or host.

+// tinyusb does not support dual devices or dual host configuration

 //--------------------------------------------------------------------

 /** \defgroup group_mode Controller Mode Selection

  * \brief CFG_TUSB_CONTROLLER_N_MODE must be defined with these

  *  @{ */

-#define OPT_MODE_HOST    0x02 ///< Host Mode

-#define OPT_MODE_DEVICE  0x01 ///< Device Mode

-#define OPT_MODE_NONE    0x00 ///< Disabled

+#define OPT_MODE_NONE         0x00 ///< Disabled

+#define OPT_MODE_DEVICE       0x01 ///< Device Mode

+#define OPT_MODE_HOST         0x02 ///< Host Mode

+#define OPT_MODE_HIGH_SPEED   0x10 ///< Highspeed

 /** @} */

 

 #ifndef CFG_TUSB_RHPORT0_MODE

@@ -100,21 +103,28 @@
   #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE

 #endif

 

+#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST)) || \

+    ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE))

+  #error "tinyusb does not support same modes on more than 1 roothub port"

+#endif

+

+// TODO remove

 #define CONTROLLER_HOST_NUMBER (\

     ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 1 : 0) + \

     ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) ? 1 : 0))

 

 #define MODE_HOST_SUPPORTED     (CONTROLLER_HOST_NUMBER > 0)

 

+// Which roothub port is configured as host

 #define TUH_OPT_RHPORT          ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) ? 1 : -1) )

 #define TUSB_OPT_HOST_ENABLED   ( TUH_OPT_RHPORT >= 0 )

 

+// Which roothub port is configured as device

 #define TUD_OPT_RHPORT          ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) ? 1 : -1) )

+#define TUD_OPT_HIGH_SPEED      ( (CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)) || (CFG_TUSB_RHPORT1_MODE & (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)) )

+

 #define TUSB_OPT_DEVICE_ENABLED ( TUD_OPT_RHPORT >= 0 )

 

-#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST)) || ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE))

-  #error "tinyusb does not support same modes on more than 1 roothub port"

-#endif

 

 //--------------------------------------------------------------------+

 // COMMON OPTIONS