rename dk board and more update

7 files changed, 153 insertions, 56 deletions

diff --git a/.idea/cmake.xml b/.idea/cmake.xml
index 101f08078..d12e44789 100644
--- a/.idea/cmake.xml
+++ b/.idea/cmake.xml
@@ -62,6 +62,7 @@
       <configuration PROFILE_NAME="stm32f103_mini_2" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f103_mini_2" />
       <configuration PROFILE_NAME="stm32f411disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f411disco -DLOG=2 -DLOGGER=RTT" />
       <configuration PROFILE_NAME="stm32f769disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f769disco -DLOG=3 -DLOGGER=RTT" />
+      <configuration PROFILE_NAME="stm32h563nucleo" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h563nucleo -DLOG=3 -DLOGGER=RTT -DTRACE_ETM=1" />
       <configuration PROFILE_NAME="stm32h743eval" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743eval -DLOG=3 -DLOGGER=RTT -DTRACE_ETM=1" />
       <configuration PROFILE_NAME="stm32h743nucleo" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743nucleo -DLOG=3" />
       <configuration PROFILE_NAME="stm32l476disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32l476disco" />
diff --git a/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h
index 52dfa095f..34398c448 100644
--- a/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h
+++ b/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h
@@ -44,7 +44,7 @@
 
 // skip if included from IAR assembler
 #ifndef __IASMARM__
-  #include "stm32g0xx.h"
+  #include "stm32h5xx.h"
 #endif
 
 /* Cortex M23/M33 port configuration. */
@@ -143,7 +143,7 @@
 //--------------------------------------------------------------------+
 
 // For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
-#define configPRIO_BITS       2
+#define configPRIO_BITS       4
 
 /* The lowest interrupt priority that can be used in a call to a "set priority" function. */
 #define configLIBRARY_LOWEST_INTERRUPT_PRIORITY       ((1<<configPRIO_BITS) - 1)
diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h
new file mode 100644
index 000000000..fd47d498a
--- /dev/null
+++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h
@@ -0,0 +1,115 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ * Copyright (c) 2023, HiFiPhile
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOG
+#define LED_PIN               GPIO_PIN_4
+#define LED_STATE_ON          1
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PIN_0
+#define BUTTON_STATE_ACTIVE   0
+
+// UART Enable for STLink VCOM
+#define UART_DEV              USART1
+#define UART_CLK_EN           __USART1_CLK_ENABLE
+#define UART_GPIO_PORT        GPIOA
+#define UART_GPIO_AF          GPIO_AF7_USART1
+
+#define UART_TX_PIN           GPIO_PIN_9
+#define UART_RX_PIN           GPIO_PIN_10
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+static inline void SystemClock_Config(void) {
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage */
+  HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  Freq 250MHZ */
+
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS_DIGITAL;
+  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLL1_SOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 5;
+  RCC_OscInitStruct.PLL.PLLN = 100;
+  RCC_OscInitStruct.PLL.PLLP = 2;
+  RCC_OscInitStruct.PLL.PLLQ = 10;
+  RCC_OscInitStruct.PLL.PLLR = 2;
+  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1_VCIRANGE_2;
+  RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1_VCORANGE_WIDE;
+  RCC_OscInitStruct.PLL.PLLFRACN = 0;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /** Initializes the CPU, AHB and APB buses clocks */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
+
+  // Configure CRS clock source
+  __HAL_RCC_CRS_CLK_ENABLE();
+  RCC_CRSInitTypeDef RCC_CRSInitStruct = {0};
+  RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
+  RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
+  RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING;
+  RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000);
+  RCC_CRSInitStruct.ErrorLimitValue = 34;
+  RCC_CRSInitStruct.HSI48CalibrationValue = 32;
+  HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
+
+  /* Select HSI48 as USB clock source */
+  RCC_PeriphCLKInitTypeDef usb_clk = {0 };
+  usb_clk.PeriphClockSelection = RCC_PERIPHCLK_USB;
+  usb_clk.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+  HAL_RCCEx_PeriphCLKConfig(&usb_clk);
+
+  /* Peripheral clock enable */
+  __HAL_RCC_USB_CLK_ENABLE();
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BOARD_H_ */
diff --git a/hw/bsp/stm32h5/boards/stm32h573i-dk/board.cmake b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake
index 92d6d98f0..92d6d98f0 100644
--- a/hw/bsp/stm32h5/boards/stm32h573i-dk/board.cmake
+++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake
diff --git a/hw/bsp/stm32h5/boards/stm32h573i-dk/board.h b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h
index a8808e32b..674cf8e2a 100644
--- a/hw/bsp/stm32h5/boards/stm32h573i-dk/board.h
+++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h
@@ -51,15 +51,10 @@ extern "C" {
 #define UART_TX_PIN           GPIO_PIN_9
 #define UART_RX_PIN           GPIO_PIN_10
 
-
-
-
 //--------------------------------------------------------------------+
 // RCC Clock
 //--------------------------------------------------------------------+
-// Clock configure for STM32stm32h573i-dk
-static inline void board_clock_init(void)
-{
+static inline void SystemClock_Config(void) {
   RCC_OscInitTypeDef RCC_OscInitStruct = {0};
   RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
 
@@ -103,7 +98,6 @@ static inline void board_clock_init(void)
   RCC_CRSInitStruct.HSI48CalibrationValue = 32;
   HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
 
-
   /* Select HSI48 as USB clock source */
   RCC_PeriphCLKInitTypeDef usb_clk = {0 };
   usb_clk.PeriphClockSelection = RCC_PERIPHCLK_USB;
@@ -112,10 +106,6 @@ static inline void board_clock_init(void)
 
   /* Peripheral clock enable */
   __HAL_RCC_USB_CLK_ENABLE();
-
-  SystemCoreClockUpdate();
-
-
 }
 
 #ifdef __cplusplus
diff --git a/hw/bsp/stm32h5/boards/stm32h573i-dk/board.mk b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk
index b24acf89f..b24acf89f 100644
--- a/hw/bsp/stm32h5/boards/stm32h573i-dk/board.mk
+++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk
diff --git a/hw/bsp/stm32h5/family.c b/hw/bsp/stm32h5/family.c
index 6eeba22df..8df163bd9 100644
--- a/hw/bsp/stm32h5/family.c
+++ b/hw/bsp/stm32h5/family.c
@@ -44,8 +44,7 @@
 //--------------------------------------------------------------------+
 // Forward USB interrupt events to TinyUSB IRQ Handler
 //--------------------------------------------------------------------+
-void USB_DRD_FS_IRQHandler(void)
-{
+void USB_DRD_FS_IRQHandler(void) {
   tud_int_handler(0);
 }
 
@@ -54,10 +53,10 @@ void USB_DRD_FS_IRQHandler(void)
 //--------------------------------------------------------------------+
 UART_HandleTypeDef UartHandle;
 
-void board_init(void)
-{
+void board_init(void) {
   HAL_Init(); // required for HAL_RCC_Osc TODO check with freeRTOS
-  board_clock_init();
+  SystemClock_Config(); // implemented in board.h
+  SystemCoreClockUpdate();
 
   // Enable All GPIOs clocks
   __HAL_RCC_GPIOA_CLK_ENABLE();
@@ -65,12 +64,14 @@ void board_init(void)
   __HAL_RCC_GPIOC_CLK_ENABLE();
   __HAL_RCC_GPIOD_CLK_ENABLE();
   __HAL_RCC_GPIOE_CLK_ENABLE();
+  __HAL_RCC_GPIOG_CLK_ENABLE();
+  __HAL_RCC_GPIOH_CLK_ENABLE();
   __HAL_RCC_GPIOI_CLK_ENABLE();
 
   //__HAL_RCC_SYSCFG_CLK_ENABLE();
   //__HAL_RCC_PWR_CLK_ENABLE();
 
-  UART_CLK_EN();
+      UART_CLK_EN();
 
   #if CFG_TUSB_OS == OPT_OS_NONE
   // 1ms tick timer
@@ -103,24 +104,23 @@ void board_init(void)
 
   #ifdef UART_DEV
   // UART
-  GPIO_InitStruct.Pin       = UART_TX_PIN | UART_RX_PIN;
-  GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
-  GPIO_InitStruct.Pull      = GPIO_PULLUP;
-  GPIO_InitStruct.Speed     = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
   GPIO_InitStruct.Alternate = UART_GPIO_AF;
   HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct);
 
-  UartHandle = (UART_HandleTypeDef)
-  {
-    .Instance        = UART_DEV,
-    .Init.BaudRate   = CFG_BOARD_UART_BAUDRATE,
-    .Init.WordLength = UART_WORDLENGTH_8B,
-    .Init.StopBits   = UART_STOPBITS_1,
-    .Init.Parity     = UART_PARITY_NONE,
-    .Init.HwFlowCtl  = UART_HWCONTROL_NONE,
-    .Init.Mode       = UART_MODE_TX_RX,
-    .Init.OverSampling = UART_OVERSAMPLING_16,
-    .AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT
+  UartHandle = (UART_HandleTypeDef) {
+      .Instance        = UART_DEV,
+      .Init.BaudRate   = CFG_BOARD_UART_BAUDRATE,
+      .Init.WordLength = UART_WORDLENGTH_8B,
+      .Init.StopBits   = UART_STOPBITS_1,
+      .Init.Parity     = UART_PARITY_NONE,
+      .Init.HwFlowCtl  = UART_HWCONTROL_NONE,
+      .Init.Mode       = UART_MODE_TX_RX,
+      .Init.OverSampling = UART_OVERSAMPLING_16,
+      .AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT
   };
   HAL_UART_Init(&UartHandle);
   #endif
@@ -144,22 +144,19 @@ void board_init(void)
 // Board porting API
 //--------------------------------------------------------------------+
 
-void board_led_write(bool state)
-{
-  GPIO_PinState pin_state = (GPIO_PinState)(state ? LED_STATE_ON : (1 - LED_STATE_ON));
+void board_led_write(bool state) {
+  GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1 - LED_STATE_ON));
   HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state);
 }
 
-uint32_t board_button_read(void)
-{
+uint32_t board_button_read(void) {
   return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
 }
 
-size_t board_get_unique_id(uint8_t id[], size_t max_len)
-{
+size_t board_get_unique_id(uint8_t id[], size_t max_len) {
   (void) max_len;
-  volatile uint32_t *stm32_uuid = (volatile uint32_t *) UID_BASE;
-  uint32_t *id32 = (uint32_t *)(uintptr_t) id;
+  volatile uint32_t* stm32_uuid = (volatile uint32_t*) UID_BASE;
+  uint32_t* id32 = (uint32_t*) (uintptr_t) id;
   uint8_t const len = 12;
 
   id32[0] = stm32_uuid[0];
@@ -169,17 +166,15 @@ size_t board_get_unique_id(uint8_t id[], size_t max_len)
   return len;
 }
 
-int board_uart_read(uint8_t *buf, int len)
-{
+int board_uart_read(uint8_t* buf, int len) {
   (void) buf;
   (void) len;
   return 0;
 }
 
-int board_uart_write(void const *buf, int len)
-{
+int board_uart_write(void const* buf, int len) {
   #ifdef UART_DEV
-  HAL_UART_Transmit(&UartHandle, (uint8_t *)(uintptr_t) buf, len, 0xffff);
+  HAL_UART_Transmit(&UartHandle, (uint8_t*) (uintptr_t) buf, len, 0xffff);
   return len;
   #else
   (void) buf;
@@ -192,27 +187,23 @@ int board_uart_write(void const *buf, int len)
 #if CFG_TUSB_OS == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
 
-void SysTick_Handler(void)
-{
+void SysTick_Handler(void) {
   system_ticks++;
   HAL_IncTick();
 }
 
-uint32_t board_millis(void)
-{
+uint32_t board_millis(void) {
   return system_ticks;
 }
 
 #endif
 
-void HardFault_Handler(void)
-{
+void HardFault_Handler(void) {
   __asm("BKPT #0\n");
 }
 
 // Required by __libc_init_array in startup code if we are compiling using
 // -nostdlib/-nostartfiles.
-void _init(void)
-{
+void _init(void) {
 
 }