auto detect max rhport speed based on mcu

22 files changed, 90 insertions, 163 deletions

diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h
index 44be5a0d7..023faa7e2 100644
--- a/examples/device/audio_4_channel_mic/src/tusb_config.h
+++ b/examples/device/audio_4_channel_mic/src/tusb_config.h
@@ -39,11 +39,7 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
 
 #ifndef CFG_TUSB_OS
 #define CFG_TUSB_OS                 OPT_OS_NONE
diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h
index 683a1a567..9b8514265 100644
--- a/examples/device/audio_test/src/tusb_config.h
+++ b/examples/device/audio_test/src/tusb_config.h
@@ -39,11 +39,7 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
 
 #ifndef CFG_TUSB_OS
 #define CFG_TUSB_OS                 OPT_OS_NONE
diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h
index ff8535d1a..f93606092 100644
--- a/examples/device/cdc_dual_ports/src/tusb_config.h
+++ b/examples/device/cdc_dual_ports/src/tusb_config.h
@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h
index e74e80541..6507cef19 100644
--- a/examples/device/cdc_msc/src/tusb_config.h
+++ b/examples/device/cdc_msc/src/tusb_config.h
@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/dfu/src/tusb_config.h b/examples/device/dfu/src/tusb_config.h
index 012d50019..d4779b2e1 100644
--- a/examples/device/dfu/src/tusb_config.h
+++ b/examples/device/dfu/src/tusb_config.h
@@ -27,14 +27,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/dfu_runtime/src/tusb_config.h b/examples/device/dfu_runtime/src/tusb_config.h
index bdae1d2e9..e15ae7997 100644
--- a/examples/device/dfu_runtime/src/tusb_config.h
+++ b/examples/device/dfu_runtime/src/tusb_config.h
@@ -27,14 +27,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h
index 23073faf3..ddc295dcc 100644
--- a/examples/device/dynamic_configuration/src/tusb_config.h
+++ b/examples/device/dynamic_configuration/src/tusb_config.h
@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h
index 1381dd6b2..1c8fa40b2 100644
--- a/examples/device/hid_boot_interface/src/tusb_config.h
+++ b/examples/device/hid_boot_interface/src/tusb_config.h
@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X || \
-       CFG_TUSB_MCU == OPT_MCU_FT90X   || CFG_TUSB_MCU == OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h
index 449efbc7e..d0f2b513f 100644
--- a/examples/device/hid_composite/src/tusb_config.h
+++ b/examples/device/hid_composite/src/tusb_config.h
@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h
index 062f32ac3..7522bd714 100644
--- a/examples/device/hid_composite_freertos/src/tusb_config.h
+++ b/examples/device/hid_composite_freertos/src/tusb_config.h
@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h
index 1b8b91c41..9db50269c 100644
--- a/examples/device/hid_generic_inout/src/tusb_config.h
+++ b/examples/device/hid_generic_inout/src/tusb_config.h
@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/hid_multiple_interface/src/tusb_config.h b/examples/device/hid_multiple_interface/src/tusb_config.h
index c034b086e..32e8c2843 100644
--- a/examples/device/hid_multiple_interface/src/tusb_config.h
+++ b/examples/device/hid_multiple_interface/src/tusb_config.h
@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || \
-       CFG_TUSB_MCU == OPT_MCU_FT90X   || CFG_TUSB_MCU == OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h
index a40d7605c..967c71403 100644
--- a/examples/device/midi_test/src/tusb_config.h
+++ b/examples/device/midi_test/src/tusb_config.h
@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || \
-       CFG_TUSB_MCU == OPT_MCU_FT90X   || CFG_TUSB_MCU == OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h
index 44da21e54..f617f5a4c 100644
--- a/examples/device/msc_dual_lun/src/tusb_config.h
+++ b/examples/device/msc_dual_lun/src/tusb_config.h
@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h
index 114961cb7..b1b48598b 100644
--- a/examples/device/net_lwip_webserver/src/tusb_config.h
+++ b/examples/device/net_lwip_webserver/src/tusb_config.h
@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h
index e8d93f56a..3b2f7df48 100644
--- a/examples/device/uac2_headset/src/tusb_config.h
+++ b/examples/device/uac2_headset/src/tusb_config.h
@@ -42,10 +42,10 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
+// RHPort max operational speed can defined by board.mk
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 #ifndef CFG_TUSB_OS
diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h
index a192d0dbc..5b2215be5 100644
--- a/examples/device/usbtmc/src/tusb_config.h
+++ b/examples/device/usbtmc/src/tusb_config.h
@@ -27,14 +27,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h
index 4feb6a48a..3a079e66b 100644
--- a/examples/device/video_capture/src/tusb_config.h
+++ b/examples/device/video_capture/src/tusb_config.h
@@ -40,14 +40,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h
index 26b81b389..f5e4694e3 100644
--- a/examples/device/webusb_serial/src/tusb_config.h
+++ b/examples/device/webusb_serial/src/tusb_config.h
@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
diff --git a/src/device/dcd_attr.h b/src/device/dcd_attr.h
index e16a5ccca..e14a3f134 100644
--- a/src/device/dcd_attr.h
+++ b/src/device/dcd_attr.h
@@ -33,7 +33,8 @@
 // - ENDPOINT_MAX: max (logical) number of endpoint
 // - ENDPOINT_EXCLUSIVE_NUMBER: endpoint number with different direction IN and OUT aren't allowed,
 //                              e.g EP1 OUT & EP1 IN cannot exist together
-// - PORT_HIGHSPEED: mask to indicate which port support highspeed mode, bit0 for port0 and so on.
+// - RHPORT_HIGHSPEED: mask to indicate which port support highspeed mode (without external PHY)
+//                     bit0 for port0 and so on.
 
 //------------- NXP -------------//
 #if   TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX)
@@ -45,7 +46,8 @@
 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
   // TODO USB0 has 6, USB1 has 4
   #define DCD_ATTR_CONTROLLER_CHIPIDEA_HS
-  #define DCD_ATTR_ENDPOINT_MAX   6
+  #define DCD_ATTR_ENDPOINT_MAX     6
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01 // Port0 HS, Port1 FS
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX)
    #define DCD_ATTR_ENDPOINT_MAX   5
@@ -60,7 +62,8 @@
 
 #elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX)
   #define DCD_ATTR_CONTROLLER_CHIPIDEA_HS
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define DCD_ATTR_ENDPOINT_MAX     8
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x03 // Port0 HS, Port1 HS
 
 #elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX, OPT_MCU_K32L2BXX)
   #define DCD_ATTR_ENDPOINT_MAX   16
@@ -83,7 +86,8 @@
   #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
 
 #elif TU_CHECK_MCU(OPT_MCU_SAMX7X)
-  #define DCD_ATTR_ENDPOINT_MAX   10
+  #define DCD_ATTR_ENDPOINT_MAX     10
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
   #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
 
 #elif TU_CHECK_MCU(OPT_MCU_PIC32MZ)
@@ -145,7 +149,8 @@
 
 //------------- Sony -------------//
 #elif TU_CHECK_MCU(OPT_MCU_CXD56)
-  #define DCD_ATTR_ENDPOINT_MAX   7
+  #define DCD_ATTR_ENDPOINT_MAX     7
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
   #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
 
 //------------- TI -------------//
@@ -167,7 +172,8 @@
   #define DCD_ATTR_ENDPOINT_MAX   6
 
 #elif TU_CHECK_MCU(OPT_MCU_NUC505)
-  #define DCD_ATTR_ENDPOINT_MAX   12
+  #define DCD_ATTR_ENDPOINT_MAX     12
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
 
 //------------- Espressif -------------//
 #elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
@@ -195,7 +201,8 @@
 
 //------------- Broadcom -------------//
 #elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define DCD_ATTR_ENDPOINT_MAX     8
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
 
 //------------- Broadcom -------------//
 #elif TU_CHECK_MCU(OPT_MCU_XMC4000)
@@ -203,10 +210,12 @@
 
 //------------- BridgeTek -------------//
 #elif TU_CHECK_MCU(OPT_MCU_FT90X)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define DCD_ATTR_ENDPOINT_MAX     8
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
 
 #elif TU_CHECK_MCU(OPT_MCU_FT93X)
-  #define DCD_ATTR_ENDPOINT_MAX   16
+  #define DCD_ATTR_ENDPOINT_MAX     16
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
 
 //------------ Allwinner -------------//
 #elif TU_CHECK_MCU(OPT_MCU_F1C100S)
@@ -218,8 +227,8 @@
 #endif
 
 // Default to fullspeed if not defined
-//#ifndef PORT_HIGHSPEED
-//  #define DCD_ATTR_PORT_HIGHSPEED 0x00
-//#endif
+#ifndef DCD_ATTR_RHPORT_HIGHSPEED
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x00
+#endif
 
 #endif
diff --git a/src/device/usbd.h b/src/device/usbd.h
index ec34817fa..b2bf8ba9d 100644
--- a/src/device/usbd.h
+++ b/src/device/usbd.h
@@ -453,7 +453,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -502,7 +502,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -550,7 +550,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\
   /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\
@@ -558,7 +558,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 
 //   Calculate wMaxPacketSize of Endpoints
 #define TUD_AUDIO_EP_SIZE(_maxFrequency, _nBytesPerSample, _nChannels) \
-    ((((_maxFrequency + ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 7999 : 999)) / ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels)
+    ((((_maxFrequency + (TUD_OPT_HIGH_SPEED ? 7999 : 999)) / (TUD_OPT_HIGH_SPEED ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels)
 
 
 //--------------------------------------------------------------------+
diff --git a/src/tusb_option.h b/src/tusb_option.h
index 714c6ed9e..5d104e31c 100644
--- a/src/tusb_option.h
+++ b/src/tusb_option.h
@@ -172,20 +172,24 @@
   #include "tusb_config.h"
 #endif
 
+#include "device/dcd_attr.h"
+
 //--------------------------------------------------------------------
 // RootHub Mode Configuration
 // CFG_TUSB_RHPORTx_MODE contains operation mode and speed for that port
 //--------------------------------------------------------------------
 
-// Lower 4-bit is operational mode
-#define OPT_MODE_NONE         0x00 ///< Disabled
-#define OPT_MODE_DEVICE       0x01 ///< Device Mode
-#define OPT_MODE_HOST         0x02 ///< Host Mode
+// Low byte is operational mode
+#define OPT_MODE_NONE           0x0000 ///< Disabled
+#define OPT_MODE_DEVICE         0x0001 ///< Device Mode
+#define OPT_MODE_HOST           0x0002 ///< Host Mode
 
-// Higher 4-bit is max operational speed (corresponding to tusb_speed_t)
-#define OPT_MODE_FULL_SPEED   0x00 ///< Max Full Speed
-#define OPT_MODE_LOW_SPEED    0x10 ///< Max Low Speed
-#define OPT_MODE_HIGH_SPEED   0x20 ///< Max High Speed
+// High byte is max operational speed (corresponding to tusb_speed_t)
+#define OPT_MODE_DEFAULT_SPEED  0x0000 ///< Default (max) speed supported by MCU
+#define OPT_MODE_LOW_SPEED      0x0100 ///< Low Speed
+#define OPT_MODE_FULL_SPEED     0x0200 ///< Full Speed
+#define OPT_MODE_HIGH_SPEED     0x0400 ///< High Speed
+#define OPT_MODE_SPEED_MASK     0xff00
 
 #ifndef CFG_TUSB_RHPORT0_MODE
   #define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE
@@ -200,20 +204,27 @@
   #error "TinyUSB currently does not support same modes on more than 1 roothub port"
 #endif
 
-// Which roothub port is configured as host
-#define TUH_OPT_RHPORT      ( ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST) ? 0 : (((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HOST) ? 1 : -1) )
-#define CFG_TUH_ENABLED     ( TUH_OPT_RHPORT >= 0 )
-
-// Which roothub port is configured as device
-#define TUD_OPT_RHPORT      ( ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) ? 0 : (((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE) ? 1 : -1) )
+//------------- Roothub as Device -------------//
 
-#if TUD_OPT_RHPORT == 0
-#define TUD_OPT_HIGH_SPEED  ( (CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HIGH_SPEED )
+#if (CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE
+  #define TUD_RHPORT_MODE  (CFG_TUSB_RHPORT0_MODE)
+  #define TUD_OPT_RHPORT   0
+#elif (CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE
+  #define TUD_RHPORT_MODE  (CFG_TUSB_RHPORT1_MODE)
+  #define TUD_OPT_RHPORT   1
 #else
-#define TUD_OPT_HIGH_SPEED  ( (CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HIGH_SPEED )
+  #define TUD_RHPORT_MODE   OPT_MODE_NONE
+  #define TUD_OPT_RHPORT   -1
 #endif
 
-#define CFG_TUD_ENABLED ( TUD_OPT_RHPORT >= 0 )
+#define CFG_TUD_ENABLED     ( TUD_RHPORT_MODE & OPT_MODE_DEVICE )
+#define TUD_OPT_HIGH_SPEED  ( (TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK) ? (TUD_RHPORT_MODE & OPT_MODE_HIGH_SPEED) : (DCD_ATTR_RHPORT_HIGHSPEED & (1 << TUD_OPT_RHPORT)) )
+
+// CFG_TUD_SPEED    OPT_MODE_HIGH_SPEED
+
+//------------- Roothub as Host -------------//
+#define TUH_OPT_RHPORT      ( ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST) ? 0 : (((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HOST) ? 1 : -1) )
+#define CFG_TUH_ENABLED     ( TUH_OPT_RHPORT >= 0 )
 
 // For backward compatible
 #define TUSB_OPT_DEVICE_ENABLED CFG_TUD_ENABLED