diff options
| author | Ha Thach <[email protected]> | 2024-12-17 11:14:57 +0700 |
|---|---|---|
| committer | GitHub <[email protected]> | 2024-12-17 11:14:57 +0700 |
| commit | b1eae1e5e41dacfb70688ae8aeb950b7b68b8046 (patch) | |
| tree | 5a59ed7a186a0bc6c528f702349d2b1ce001a6af | |
| parent | 8eeddaab364e413153ebd0a8302f85dfb2e60e9f (diff) | |
| parent | f74ee9c4ed21795e26fdc96af0195657fa404811 (diff) | |
Merge pull request #2906 from hathach/add-ra8m1
Add ra8m1_ek
163 files changed, 13378 insertions, 1669 deletions
diff --git a/.circleci/config2.yml b/.circleci/config2.yml index e6ae87e77..c3bf2a270 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -16,7 +16,7 @@ commands: "arm-gcc": "https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v13.2.1-1.1/xpack-arm-none-eabi-gcc-13.2.1-1.1-linux-x64.tar.gz", "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", - "rx-gcc": "https://llvm-gcc-renesas.com/downloads/get.php?f=rx/8.3.0.202004-gnurx/gcc-8.3.0.202004-GNURX-ELF.run", + "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run", "arm-iar": "https://updates.iar.com/FileStore/STANDARD/001/003/322/cxarm-9.60.3.deb" }' toolchain_url=$(echo $TOOLCHAIN_JSON | jq -r '.["<< parameters.toolchain >>"]') diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index 8406a812d..484001cda 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -41,7 +41,7 @@ runs: "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", - "rx-gcc": "http://gcc-renesas.com/downloads/get.php?f=rx/8.3.0.202004-gnurx/gcc-8.3.0.202004-GNURX-ELF.run" + "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run" }' TOOLCHAIN_URL=$(echo $TOOLCHAIN_JSON | jq -r '.["${{ inputs.toolchain }}"]') echo "toolchain_url=$TOOLCHAIN_URL" diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index 530484079..ed0efd66e 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -33,6 +33,8 @@ jobs: - name: Build Fuzzer run: | + sudo apt install libc++-dev libc++abi-dev + clang --version export CC=clang export CXX=clang++ fuzz_harness=$(ls -d test/fuzz/device/*/) diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 5af6d7722..e4c189251 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -118,10 +118,13 @@ <configuration PROFILE_NAME="stm32wb55nucleo" ENABLED="false" GENERATION_OPTIONS="-DBOARD=stm32wb55nucleo" /> <configuration PROFILE_NAME="ra2a1_ek" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=ra2a1_ek -DLOG=1 -DLOGGER=RTT" /> <configuration PROFILE_NAME="ra4m1_ek" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=ra4m1_ek -DLOG=1 -DLOGGER=RTT" /> + <configuration PROFILE_NAME="ra4m3_ek" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=ra4m3_ek -DLOG=1 -DLOGGER=RTT" /> <configuration PROFILE_NAME="ra6m1_ek" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=ra6m1_ek -DLOG=1 -DLOGGER=RTT" /> <configuration PROFILE_NAME="ra6m5_ek" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=ra6m5_ek -DLOG=1 -DLOGGER=RTT -DTRACE_ETM=1" /> - <configuration PROFILE_NAME="ra6m5_ek PORT0" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=ra6m5_ek -DLOG=1 -DLOGGER=RTT -DTRACE_ETM=1 -DPORT=0" /> - <configuration PROFILE_NAME="uno_r4" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=uno_r4 -DLOG=4 -DLOGGER=RTT" /> + <configuration PROFILE_NAME="ra6m5_ek PORT0" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=ra6m5_ek -DLOG=1 -DLOGGER=RTT -DTRACE_ETM=1 -DRHPORT_DEVICE=0" /> + <configuration PROFILE_NAME="ra8m1_ek" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=ra8m1_ek -DLOG=2 -DLOGGER=RTT -DTRACE_ETM=1" /> + <configuration PROFILE_NAME="ra8m1_ek PORT0" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=ra8m1_ek -DLOG=2 -DLOGGER=RTT -DTRACE_ETM=1 -DRHPORT_DEVICE=0" /> + <configuration PROFILE_NAME="uno_r4" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=uno_r4 -DLOG=1 -DLOGGER=RTT" /> <configuration PROFILE_NAME="portenta_c33" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=portenta_c33 -DLOG=1" /> <configuration PROFILE_NAME="lpcxpresso11u37" ENABLED="false" GENERATION_OPTIONS="-DBOARD=lpcxpresso11u37" /> <configuration PROFILE_NAME="lpcxpresso11u68" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=lpcxpresso11u68 -DLOG=1 -DLOGGER=RTT" /> diff --git a/examples/build_system/cmake/cpu/cortex-m85.cmake b/examples/build_system/cmake/cpu/cortex-m85.cmake new file mode 100644 index 000000000..30314acbc --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m85.cmake @@ -0,0 +1,25 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m85 + -mfloat-abi=hard + -mfpu=fpv5-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM85_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=cortex-m85 + -mfpu=fpv5-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM85_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m85 + --fpu VFPv5_D16 + ) + set(FREERTOS_PORT IAR_ARM_CM85_NTZ_NONSECURE CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/make/cpu/cortex-m85.mk b/examples/build_system/make/cpu/cortex-m85.mk new file mode 100644 index 000000000..75e8f3aaf --- /dev/null +++ b/examples/build_system/make/cpu/cortex-m85.mk @@ -0,0 +1,27 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m85 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + --target=arm-none-eabi \ + -mcpu=cortex-m85 \ + -mfpu=fpv5-d16 \ + +else ifeq ($(TOOLCHAIN),iar) + CFLAGS += \ + --cpu cortex-m85 \ + --fpu VFPv5_D16 \ + + ASFLAGS += \ + --cpu cortex-m85 \ + --fpu VFPv5_D16 \ + +else + $(error "TOOLCHAIN is not supported") +endif + +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM85_NTZ/non_secure diff --git a/hw/bsp/ra/board_cfg.h b/hw/bsp/ra/board_cfg.h index baed46b5f..825f8cd32 100644 --- a/hw/bsp/ra/board_cfg.h +++ b/hw/bsp/ra/board_cfg.h @@ -1,45 +1,13 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2023 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#ifndef _BOARD_CFG_H -#define _BOARD_CFG_H - +/* generated configuration header file - do not edit */ +#ifndef BOARD_CFG_H_ +#define BOARD_CFG_H_ #ifdef __cplusplus -extern "C" { -#endif - -#if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8) - #define BOARD_HAS_USB_HIGHSPEED -#endif + extern "C" { + #endif -// for SystemInit() -void bsp_init(void * p_args); - - -#ifdef __cplusplus -} -#endif + void bsp_init(void * p_args); -#endif + #ifdef __cplusplus + } + #endif +#endif /* BOARD_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/board.cmake b/hw/bsp/ra/boards/portenta_c33/board.cmake index 1837d8450..520686daa 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.cmake +++ b/hw/bsp/ra/boards/portenta_c33/board.cmake @@ -4,22 +4,13 @@ set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) set(DFU_UTIL_VID_PID 2341:0368) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) -set(PORT 1) +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) endif() - -# Host port will be the other port -set(HOST_PORT $<NOT:${PORT}>) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - BOARD_TUD_RHPORT=${PORT} - BOARD_TUH_RHPORT=${HOST_PORT} - # port 0 is fullspeed, port 1 is highspeed - BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> - BOARD_TUH_MAX_SPEED=$<IF:${HOST_PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> - ) endfunction() diff --git a/hw/bsp/ra/boards/portenta_c33/board.h b/hw/bsp/ra/boards/portenta_c33/board.h index 7841ec8b8..ba663d040 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.h +++ b/hw/bsp/ra/boards/portenta_c33/board.h @@ -31,36 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_01_PIN_07 // Red LED #define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_04_PIN_08 // D12 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW }, - { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT }, - - // USB FS - { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH }, - { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, - { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, - - // USB HS - { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS }, - { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, - { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, - - // ETM Trace - #ifdef TRACE_ETM - { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - #endif -}; - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/portenta_c33/board.mk b/hw/bsp/ra/boards/portenta_c33/board.mk index 6a5c2ffce..ab814cda6 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.mk +++ b/hw/bsp/ra/boards/portenta_c33/board.mk @@ -1,10 +1,9 @@ CPU_CORE = cortex-m33 MCU_VARIANT = ra6m5 -LD_FILE = ${BOARD_PATH}/${BOARD}.ld - # Port 1 is highspeed -PORT ?= 1 +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 JLINK_DEVICE = R7FA6M5BH DFU_UTIL_OPTION = -d 2341:0368 -a 0 diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 33d381850..000000000 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,63 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (2) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) -#else - #define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x1000) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 6845183db..000000000 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA6M5BH3CFC -#define BSP_MCU_FEATURE_SET ('B') -#define BSP_ROM_SIZE_BYTES (2097152) -#define BSP_RAM_SIZE_BYTES (524288) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (176) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld b/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld deleted file mode 100644 index ba15588e6..000000000 --- a/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld +++ /dev/null @@ -1,25 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x80000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x200000; -DATA_FLASH_START = 0x08000000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x0100A100; -OPTION_SETTING_LENGTH = 0x100; -OPTION_SETTING_S_START = 0x0100A200; -OPTION_SETTING_S_LENGTH = 0x100; -ID_CODE_START = 0x00000000; -ID_CODE_LENGTH = 0x0; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x68000000; -OSPI_DEVICE_0_LENGTH = 0x8000000; -OSPI_DEVICE_1_START = 0x70000000; -OSPI_DEVICE_1_LENGTH = 0x10000000; - -/* Board has bootloader */ -FLASH_IMAGE_START = 0x10000; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..90afbdef3 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x1000) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h index bd6a901c3..bd6a901c3 100644 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..e532478f8 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA6M5BH3CFC + #define BSP_MCU_FEATURE_SET ('B') + #define BSP_ROM_SIZE_BYTES (2097152) + #define BSP_RAM_SIZE_BYTES (524288) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (176) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index d5428540f..c01219377 100644 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -5,80 +5,80 @@ extern "C" { #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA6M5 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA6M5 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif -#define BSP_CFG_FLL_ENABLE (0) + #define BSP_CFG_FLL_ENABLE (0) -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#if defined(_RA_TZ_SECURE) + #if defined(_RA_TZ_SECURE) #define BSP_TZ_SECURE_BUILD (1) #define BSP_TZ_NONSECURE_BUILD (0) #elif defined(_RA_TZ_NONSECURE) #define BSP_TZ_SECURE_BUILD (0) #define BSP_TZ_NONSECURE_BUILD (1) #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (0) + #endif -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + /* TrustZone Settings */ + #define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) + #define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) + #define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) + /* CMSIS TrustZone Settings */ + #define SCB_CSR_AIRCR_INIT (1) + #define SCB_AIRCR_BFHFNMINS_VAL (0) + #define SCB_AIRCR_SYSRESETREQS_VAL (1) + #define SCB_AIRCR_PRIS_VAL (0) + #define TZ_FPU_NS_USAGE (1) #ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) + #define SCB_NSACR_CP10_11_VAL (3U) #endif #ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) + #define FPU_FPCCR_TS_VAL (1U) #endif -#define FPU_FPCCR_CLRONRETS_VAL (1) + #define FPU_FPCCR_CLRONRETS_VAL (1) #ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) + #define FPU_FPCCR_CLRONRET_VAL (1) #endif -/* The C-Cache line size that is configured during startup. */ + /* The C-Cache line size that is configured during startup. */ #ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) + #define BSP_CFG_C_CACHE_LINE_SIZE (1U) #endif -/* Type 1 Peripheral Security Attribution */ + /* Type 1 Peripheral Security Attribution */ -/* Peripheral Security Attribution Register (PSAR) Settings */ + /* Peripheral Security Attribution Register (PSAR) Settings */ #ifndef BSP_TZ_CFG_PSARB #define BSP_TZ_CFG_PSARB (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* USBFS */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ @@ -146,19 +146,19 @@ extern "C" { 0xfffffffc) /* Unused */ #endif -/* Type 2 Peripheral Security Attribution */ + /* Type 2 Peripheral Security Attribution */ -/* Security attribution for Cache registers. */ + /* Security attribution for Cache registers. */ #ifndef BSP_TZ_CFG_CSAR #define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) #endif -/* Security attribution for RSTSRn registers. */ + /* Security attribution for RSTSRn registers. */ #ifndef BSP_TZ_CFG_RSTSAR #define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) #endif -/* Security attribution for registers of LVD channels. */ + /* Security attribution for registers of LVD channels. */ #ifndef BSP_TZ_CFG_LVDSAR #define BSP_TZ_CFG_LVDSAR (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ @@ -166,16 +166,16 @@ extern "C" { 0xFFFFFFFCU) #endif -/* Security attribution for LPM registers. */ + /* Security attribution for LPM registers. */ #ifndef BSP_TZ_CFG_LPMSAR #define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) #endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ + /* Deep Standby Interrupt Factor Security Attribution Register. */ #ifndef BSP_TZ_CFG_DPFSAR #define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) #endif -/* Security attribution for CGC registers. */ + /* Security attribution for CGC registers. */ #ifndef BSP_TZ_CFG_CGFSAR #if BSP_CFG_CLOCKS_SECURE /* Protect all CGC registers from Non-secure write access. */ @@ -186,12 +186,12 @@ extern "C" { #endif #endif -/* Security attribution for Battery Backup registers. */ + /* Security attribution for Battery Backup registers. */ #ifndef BSP_TZ_CFG_BBFSAR #define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) #endif -/* Security attribution for registers for IRQ channels. */ + /* Security attribution for registers for IRQ channels. */ #ifndef BSP_TZ_CFG_ICUSARA #define BSP_TZ_CFG_ICUSARA (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ @@ -213,12 +213,12 @@ extern "C" { 0xFFFF0000U) #endif -/* Security attribution for NMI registers. */ + /* Security attribution for NMI registers. */ #ifndef BSP_TZ_CFG_ICUSARB #define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ #endif -/* Security attribution for registers for DMAC channels */ + /* Security attribution for registers for DMAC channels */ #ifndef BSP_TZ_CFG_ICUSARC #define BSP_TZ_CFG_ICUSARC (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ @@ -232,29 +232,29 @@ extern "C" { 0xFFFFFF00U) #endif -/* Security attribution registers for SELSR0. */ + /* Security attribution registers for SELSR0. */ #ifndef BSP_TZ_CFG_ICUSARD #define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN0. */ + /* Security attribution registers for WUPEN0. */ #ifndef BSP_TZ_CFG_ICUSARE #define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN1. */ + /* Security attribution registers for WUPEN1. */ #ifndef BSP_TZ_CFG_ICUSARF #define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) #endif -/* Set DTCSTSAR if the Secure program uses the DTC. */ + /* Set DTCSTSAR if the Secure program uses the DTC. */ #if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) + #define BSP_TZ_CFG_DTC_USED (0U) #else #define BSP_TZ_CFG_DTC_USED (1U) #endif -/* Security attribution of FLWT and FCKMHZ registers. */ + /* Security attribution of FLWT and FCKMHZ registers. */ #ifndef BSP_TZ_CFG_FSAR /* If the CGC registers are only accessible in Secure mode, than there is no * reason for nonsecure applications to access FLWT and FCKMHZ. */ @@ -267,118 +267,123 @@ extern "C" { #endif #endif -/* Security attribution for SRAM registers. */ + /* Security attribution for SRAM registers. */ #ifndef BSP_TZ_CFG_SRAMSAR /* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ + #define BSP_TZ_CFG_SRAMSAR (\ 1 | \ ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ 4 | \ 0xFFFFFFF8U) #endif -/* Security attribution for Standby RAM registers. */ + /* Security attribution for Standby RAM registers. */ #ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) + #define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) #endif -/* Security attribution for the DMAC Bus Master MPU settings. */ + /* Security attribution for the DMAC Bus Master MPU settings. */ #ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) + /* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ + #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) #endif -/* Security Attribution Register A for BUS Control registers. */ + /* Security Attribution Register A for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) #endif -/* Security Attribution Register B for BUS Control registers. */ + /* Security Attribution Register B for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) #endif -/* Enable Uninitialized Non-Secure Application Fallback. */ + /* Enable Uninitialized Non-Secure Application Fallback. */ #ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) + #define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) #endif -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -/* Option Function Select Register 1 Security Attribution */ + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + + /* Option Function Select Register 1 Security Attribution */ #ifndef BSP_CFG_ROM_REG_OFS1_SEL #if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((0U << 0U)) | ((0U << 2U)) | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U)) #else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) #endif #endif -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* Dual Mode Select Register */ + /* Dual Mode Select Register */ #ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) + #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) #endif -/* Block Protection Register 0 */ + /* Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS0 (~( 0U)) #endif -/* Block Protection Register 1 */ + /* Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS1 (~( 0U)) #endif -/* Block Protection Register 2 */ + /* Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS2 (~( 0U)) #endif -/* Block Protection Register 3 */ + /* Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) #endif -/* Permanent Block Protection Register 0 */ + /* Permanent Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) #endif -/* Permanent Block Protection Register 1 */ + /* Permanent Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) #endif -/* Permanent Block Protection Register 2 */ + /* Permanent Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) #endif -/* Permanent Block Protection Register 3 */ + /* Permanent Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) #endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) + #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) #endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) + #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) #endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) + #define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) #endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) + #define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif + /* Security Attribution for Bank Select Register */ +#ifndef BSP_CFG_ROM_REG_BANKSEL_SEL + #define BSP_CFG_ROM_REG_BANKSEL_SEL (0xFFFFFFFFU) #endif #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) #endif #ifdef __cplusplus diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..c411386c1 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define LED1 (BSP_IO_PORT_01_PIN_07) +#define SW1 (BSP_IO_PORT_04_PIN_08) +extern const ioport_cfg_t g_bsp_pin_cfg; /* R7FA6M5BH3CFC.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/r_ioport_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/r_ioport_cfg.h index cb7c07932..d2688bf5b 100644 --- a/hw/bsp/ra/r_ioport_cfg.h +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -1,7 +1,13 @@ /* generated configuration header file - do not edit */ #ifndef R_IOPORT_CFG_H_ #define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif #define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) +#ifdef __cplusplus +} +#endif #endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..91b9de11e --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,35 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(25U,0U) /* PLL Mul x25.0 */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL2 Mul x20.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ +#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ +#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ +#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ +#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ +#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ +#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ +#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ +#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.c b/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.h b/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include <stdint.h> +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_gen/pin_data.c b/hw/bsp/ra/boards/portenta_c33/ra_gen/pin_data.c new file mode 100644 index 000000000..fad79741a --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_gen/pin_data.c @@ -0,0 +1,71 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_01_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_11_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/linker/gcc/fsp.ld b/hw/bsp/ra/boards/portenta_c33/script/fsp.ld index 453d46f24..605eef7d2 100644 --- a/hw/bsp/ra/linker/gcc/fsp.ld +++ b/hw/bsp/ra/boards/portenta_c33/script/fsp.ld @@ -1,3 +1,9 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + /* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ /* XIP_SECONDARY_SLOT_IMAGE = 1; @@ -14,8 +20,6 @@ ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; -NS_OFFSET_START = DEFINED(NS_OFFSET_START) ? NS_OFFSET_START : 0; -NS_IMAGE_OFFSET = DEFINED(PROJECT_NONSECURE) ? NS_OFFSET_START : 0; RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; @@ -32,20 +36,21 @@ PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE) USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); __bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : - FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; __bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; __bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; __bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; __bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; __bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; __bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : - __bl_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH; + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; __bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; @@ -55,7 +60,7 @@ __bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : __bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; -__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); __bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; @@ -67,30 +72,34 @@ FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; /* Define memory regions. */ MEMORY { - ITCM (rx) : ORIGIN = ITCM_START + NS_IMAGE_OFFSET, LENGTH = ITCM_LENGTH - DTCM (rwx) : ORIGIN = DTCM_START + NS_IMAGE_OFFSET, LENGTH = DTCM_LENGTH - FLASH (rx) : ORIGIN = FLASH_ORIGIN + NS_IMAGE_OFFSET, LENGTH = LIMITED_FLASH_LENGTH - RAM (rwx) : ORIGIN = RAM_START + NS_IMAGE_OFFSET, LENGTH = RAM_LENGTH - DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START + NS_IMAGE_OFFSET, LENGTH = DATA_FLASH_LENGTH - QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH - OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH - OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH - OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH - OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH - SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH - OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_LENGTH - OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = 0x18 - OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET + 0x34, LENGTH = OPTION_SETTING_LENGTH - 0x34 - OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_S_LENGTH - ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH } /* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) +GROUP(libgcc.a libc.a libm.a) /* Linker script to place sections and symbol values. Should be used together * with other linker script that defines memory regions FLASH and RAM. @@ -144,27 +153,6 @@ ENTRY(Reset_Handler) SECTIONS { - /* Initialized ITCM data. */ - .itcm_data : - { - /* Start of ITCM Secure Trustzone region. */ - __tz_ITCM_S = ABSOLUTE(ITCM_START); - - /* All ITCM data start */ - __itcm_data_start__ = .; - - KEEP(*(.itcm_data*)) - - /* All ITCM data end */ - __itcm_data_end__ = .; - - /* - * Start of the ITCM Non-Secure Trustzone region. - * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. - */ - __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end__, 8192); - } > ITCM - .text : { __tz_FLASH_S = ABSOLUTE(FLASH_START); @@ -177,6 +165,10 @@ SECTIONS KEEP(*(.application_vectors*)) __Vectors_End = .; + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; KEEP(*(.rom_registers*)) @@ -187,7 +179,6 @@ SECTIONS /* Allocate flash write-boundary-aligned * space for sce9 wrapped public keys for mcuboot if the module is used. */ - . = ALIGN(128); KEEP(*(.mcuboot_sce9_key*)) *(.text*) @@ -233,16 +224,54 @@ SECTIONS __Vectors_Size = __Vectors_End - __Vectors; - .ARM.extab : + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; __exidx_start = .; - .ARM.exidx : + /DISCARD/ : { + *(.ARM.extab* .gnu.linkonce.armextab.*) *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH + } __exidx_end = .; /* To copy multiple ROM to RAM sections, @@ -337,50 +366,76 @@ SECTIONS } > RAM AT > FLASH - /* Start address of the initial values for .dtcm_data. */ - __dtcm_data_init_start = __etext + __data_end__ - __data_start__; + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); /* Initialized DTCM data. */ - .dtcm_data : + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) { /* Start of DTCM Secure Trustzone region. */ __tz_DTCM_S = ABSOLUTE(DTCM_START); /* Initialized DTCM data start */ - __dtcm_data_start__ = .; + __dtcm_data_start = .; KEEP(*(.dtcm_data*)) + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + /* Initialized DTCM data end */ - __dtcm_data_end__ = .; - } > DTCM AT > FLASH + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + . = __dtcm_data_end; /* Uninitialized DTCM data. */ - .dtcm_noinit (NOLOAD): + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : { /* Uninitialized DTCM data start */ - __dtcm_noinit_start = .; + __dtcm_bss_start = .; - KEEP(*(.dtcm_noinit*)) + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); /* Uninitialized DTCM data end */ - __dtcm_noinit_end = .; + __dtcm_bss_end = .; /* * Start of the DTCM Non-Secure Trustzone region. - * DTCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. */ - __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_noinit_end, 8192); + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); } > DTCM - /* TrustZone Secure Gateway Stubs Section. */ + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; - /* Some arithmetic is needed to eliminate unnecessary FILL for secure projects. */ - /* 1. Get the address to the next block after the .data section in FLASH. */ - DATA_END = LOADADDR(.data) + SIZEOF(.data); - /* 2. Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block after .data */ - SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(DATA_END, 1024); - /* 3. Manually specify the start location for .gnu.sgstubs */ + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) { __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); @@ -407,8 +462,8 @@ SECTIONS __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ - __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__); - .qspi_non_retentive : AT (__qspi_flash_code_addr__) + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) { __qspi_non_retentive_start__ = .; KEEP(*(.qspi_non_retentive*)) @@ -456,8 +511,8 @@ SECTIONS __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__) + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) { __ospi_device_0_non_retentive_start__ = .; KEEP(*(.ospi_device_0_non_retentive*)) @@ -486,8 +541,8 @@ SECTIONS __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__) + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) { __ospi_device_1_non_retentive_start__ = .; KEEP(*(.ospi_device_1_non_retentive*)) @@ -527,7 +582,6 @@ SECTIONS { . = ALIGN(8); __HeapBase = .; - PROVIDE(end = .); /* Place the STD heap here. */ KEEP(*(.heap)) __HeapLimit = .; @@ -615,7 +669,6 @@ SECTIONS __ID_Code_End = .; } > ID_CODE - /* Symbol required for RA Configuration tool. */ __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); diff --git a/hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld b/hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld new file mode 100644 index 000000000..74c648329 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld @@ -0,0 +1,25 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x80000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x200000; + DATA_FLASH_START = 0x08000000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x0100A100; + OPTION_SETTING_LENGTH = 0x100; + OPTION_SETTING_S_START = 0x0100A200; + OPTION_SETTING_S_LENGTH = 0x100; + ID_CODE_START = 0x00000000; + ID_CODE_LENGTH = 0x0; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x68000000; + OSPI_DEVICE_0_LENGTH = 0x8000000; + OSPI_DEVICE_1_START = 0x70000000; + OSPI_DEVICE_1_LENGTH = 0x10000000; + +/* Board has bootloader */ +FLASH_IMAGE_START = 0x10000; diff --git a/hw/bsp/ra/boards/portenta_c33/smart_configurator/configuration.xml b/hw/bsp/ra/boards/portenta_c33/smart_configurator/configuration.xml new file mode 100644 index 000000000..fcc9d711d --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/smart_configurator/configuration.xml @@ -0,0 +1,240 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<raConfiguration version="9"> + <generalSettings> + <option key="#Board#" value="board.custom"/> + <option key="CPU" value="RA6M5"/> + <option key="Core" value="CM33"/> + <option key="#TargetName#" value="R7FA6M5BH3CFC"/> + <option key="#TargetARCHITECTURE#" value="cortex-m33"/> + <option key="#DeviceCommand#" value="R7FA6M5BH"/> + <option key="#RTOS#" value="_none"/> + <option key="#pinconfiguration#" value="R7FA6M5BH3CFC.pincfg"/> + <option key="#FSPVersion#" value="5.6.0"/> + <option key="#SELECTED_TOOLCHAIN#" value="com.renesas.cdt.managedbuild.gnuarm.toolchain."/> + </generalSettings> + <raBspConfiguration> + <config id="config.bsp.ra6m5.R7FA6M5BH3CFC"> + <property id="config.bsp.part_number" value="config.bsp.part_number.value"/> + <property id="config.bsp.rom_size_bytes" value="config.bsp.rom_size_bytes.value"/> + <property id="config.bsp.rom_size_bytes_hidden" value="2097152"/> + <property id="config.bsp.ram_size_bytes" value="config.bsp.ram_size_bytes.value"/> + <property id="config.bsp.data_flash_size_bytes" value="config.bsp.data_flash_size_bytes.value"/> + <property id="config.bsp.package_style" value="config.bsp.package_style.value"/> + <property id="config.bsp.package_pins" value="config.bsp.package_pins.value"/> + <property id="config.bsp.irq_count_hidden" value="96"/> + </config> + <config id="config.bsp.ra6m5"> + <property id="config.bsp.series" value="config.bsp.series.value"/> + </config> + <config id="config.bsp.ra6m5.fsp"> + <property id="config.bsp.fsp.inline_irq_functions" value="config.bsp.common.inline_irq_functions.enabled"/> + <property id="config.bsp.fsp.tz.exception_response" value="config.bsp.fsp.tz.exception_response.nmi"/> + <property id="config.bsp.fsp.tz.cmsis.bfhfnmins" value="config.bsp.fsp.tz.cmsis.bfhfnmins.secure"/> + <property id="config.bsp.fsp.tz.cmsis.sysresetreqs" value="config.bsp.fsp.tz.cmsis.sysresetreqs.secure_only"/> + <property id="config.bsp.fsp.tz.cmsis.s_priority_boost" value="config.bsp.fsp.tz.cmsis.s_priority_boost.disabled"/> + <property id="config.bsp.fsp.tz.csar" value="config.bsp.fsp.tz.csar.both"/> + <property id="config.bsp.fsp.tz.rstsar" value="config.bsp.fsp.tz.rstsar.both"/> + <property id="config.bsp.fsp.tz.bbfsar" value="config.bsp.fsp.tz.bbfsar.both"/> + <property id="config.bsp.fsp.tz.sramsar.sramprcr" value="config.bsp.fsp.tz.sramsar.sramprcr.both"/> + <property id="config.bsp.fsp.tz.sramsar.sramecc" value="config.bsp.fsp.tz.sramsar.sramecc.both"/> + <property id="config.bsp.fsp.tz.stbramsar" value="config.bsp.fsp.tz.stbramsar.both"/> + <property id="config.bsp.fsp.tz.bussara" value="config.bsp.fsp.tz.bussara.both"/> + <property id="config.bsp.fsp.tz.bussarb" value="config.bsp.fsp.tz.bussarb.both"/> + <property id="config.bsp.fsp.tz.banksel_sel" value="config.bsp.fsp.tz.banksel_sel.both"/> + <property id="config.bsp.fsp.tz.uninitialized_ns_application_fallback" value="config.bsp.fsp.tz.uninitialized_ns_application_fallback.enabled"/> + <property id="config.bsp.fsp.cache_line_size" value="config.bsp.fsp.cache_line_size.32"/> + <property id="config.bsp.fsp.OFS0.iwdt_start_mode" value="config.bsp.fsp.OFS0.iwdt_start_mode.disabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_timeout" value="config.bsp.fsp.OFS0.iwdt_timeout.2048"/> + <property id="config.bsp.fsp.OFS0.iwdt_divisor" value="config.bsp.fsp.OFS0.iwdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_end" value="config.bsp.fsp.OFS0.iwdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_start" value="config.bsp.fsp.OFS0.iwdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.iwdt_reset_interrupt" value="config.bsp.fsp.OFS0.iwdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.iwdt_stop_control" value="config.bsp.fsp.OFS0.iwdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS0.wdt_start_mode" value="config.bsp.fsp.OFS0.wdt_start_mode.register"/> + <property id="config.bsp.fsp.OFS0.wdt_timeout" value="config.bsp.fsp.OFS0.wdt_timeout.16384"/> + <property id="config.bsp.fsp.OFS0.wdt_divisor" value="config.bsp.fsp.OFS0.wdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.wdt_window_end" value="config.bsp.fsp.OFS0.wdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.wdt_window_start" value="config.bsp.fsp.OFS0.wdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.wdt_reset_interrupt" value="config.bsp.fsp.OFS0.wdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.wdt_stop_control" value="config.bsp.fsp.OFS0.wdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS1_SEL.voltage_detection0_level" value="config.bsp.fsp.OFS1_SEL.voltage_detection0_level.secure"/> + <property id="config.bsp.fsp.OFS1_SEL.voltage_detection0.start" value="config.bsp.fsp.OFS1_SEL.voltage_detection0.start.secure"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0.start" value="config.bsp.fsp.OFS1.voltage_detection0.start.disabled"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0_level" value="config.bsp.fsp.OFS1.voltage_detection0_level.280"/> + <property id="config.bsp.fsp.OFS1.hoco_osc" value="config.bsp.fsp.OFS1.hoco_osc.disabled"/> + <property id="config.bsp.fsp.BPS.BPS0" value=""/> + <property id="config.bsp.fsp.BPS.BPS1" value=""/> + <property id="config.bsp.fsp.BPS.BPS2" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS0" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS1" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS2" value=""/> + <property id="config.bsp.fsp.dual_bank" value="config.bsp.fsp.dual_bank.disabled"/> + <property id="config.bsp.fsp.hoco_fll" value="config.bsp.fsp.hoco_fll.disabled"/> + <property id="config.bsp.common.main_osc_wait" value="config.bsp.common.main_osc_wait.wait_8163"/> + <property id="config.bsp.fsp.mcu.adc.max_freq_hz" value="50000000"/> + <property id="config.bsp.fsp.mcu.sci_uart.max_baud" value="16666666"/> + <property id="config.bsp.fsp.mcu.adc.sample_and_hold" value="0"/> + <property id="config.bsp.fsp.mcu.adc.sensors_are_exclusive" value="0"/> + <property id="config.bsp.fsp.mcu.sci_spi.max_bitrate" value="25000000"/> + <property id="config.bsp.fsp.mcu.spi.max_bitrate" value="50000000"/> + <property id="config.bsp.fsp.mcu.iic_master.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_master.fastplus_channels" value="0x3"/> + <property id="config.bsp.fsp.mcu.iic_slave.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_slave.fastplus_channels" value="0x3"/> + <property id="config.bsp.fsp.mcu.canfd.num_channels" value="2"/> + <property id="config.bsp.fsp.mcu.canfd.rx_fifos" value="8"/> + <property id="config.bsp.fsp.mcu.canfd.buffer_ram" value="4864"/> + <property id="config.bsp.fsp.mcu.canfd.afl_rules" value="128"/> + <property id="config.bsp.fsp.mcu.canfd.afl_rules_each_chnl" value="64"/> + <property id="config.bsp.fsp.mcu.canfd.max_data_rate_hz" value="5"/> + <property id="config.bsp.fsp.mcu.sci_uart.cstpen_channels" value="0x03F9"/> + <property id="config.bsp.fsp.mcu.gpt.pin_count_source_channels" value="0xFFFF"/> + <property id="config.bsp.fsp.mcu.adc_dmac.samples_per_channel" value="65535"/> + </config> + <config id="config.bsp.ra"> + <property id="config.bsp.common.main" value="0x1000"/> + <property id="config.bsp.common.heap" value="0x1000"/> + <property id="config.bsp.common.vcc" value="3300"/> + <property id="config.bsp.common.checking" value="config.bsp.common.checking.disabled"/> + <property id="config.bsp.common.assert" value="config.bsp.common.assert.none"/> + <property id="config.bsp.common.error_log" value="config.bsp.common.error_log.none"/> + <property id="config.bsp.common.soft_reset" value="config.bsp.common.soft_reset.disabled"/> + <property id="config.bsp.common.main_osc_populated" value="config.bsp.common.main_osc_populated.enabled"/> + <property id="config.bsp.common.pfs_protect" value="config.bsp.common.pfs_protect.enabled"/> + <property id="config.bsp.common.c_runtime_init" value="config.bsp.common.c_runtime_init.enabled"/> + <property id="config.bsp.common.early_init" value="config.bsp.common.early_init.disabled"/> + <property id="config.bsp.common.main_osc_clock_source" value="config.bsp.common.main_osc_clock_source.crystal"/> + <property id="config.bsp.common.subclock_populated" value="config.bsp.common.subclock_populated.enabled"/> + <property id="config.bsp.common.subclock_drive" value="config.bsp.common.subclock_drive.standard"/> + <property id="config.bsp.common.subclock_stabilization_ms" value="1000"/> + </config> + </raBspConfiguration> + <raClockConfiguration> + <node id="board.clock.xtal.freq" mul="24000000" option="_edit"/> + <node id="board.clock.hoco.freq" option="board.clock.hoco.freq.20m"/> + <node id="board.clock.loco.freq" option="board.clock.loco.freq.32768"/> + <node id="board.clock.moco.freq" option="board.clock.moco.freq.8m"/> + <node id="board.clock.subclk.freq" option="board.clock.subclk.freq.32768"/> + <node id="board.clock.pll.source" option="board.clock.pll.source.xtal"/> + <node id="board.clock.pll.div" option="board.clock.pll.div.3"/> + <node id="board.clock.pll.mul" option="board.clock.pll.mul.250"/> + <node id="board.clock.pll.display" option="board.clock.pll.display.value"/> + <node id="board.clock.pll2.source" option="board.clock.pll2.source.xtal"/> + <node id="board.clock.pll2.div" option="board.clock.pll2.div.2"/> + <node id="board.clock.pll2.mul" option="board.clock.pll2.mul.200"/> + <node id="board.clock.pll2.display" option="board.clock.pll2.display.value"/> + <node id="board.clock.clock.source" option="board.clock.clock.source.pll"/> + <node id="board.clock.clkout.source" option="board.clock.clkout.source.disabled"/> + <node id="board.clock.uclk.source" option="board.clock.uclk.source.pll2"/> + <node id="board.clock.u60ck.source" option="board.clock.u60ck.source.pll2"/> + <node id="board.clock.octaspiclk.source" option="board.clock.octaspiclk.source.disabled"/> + <node id="board.clock.canfdclk.source" option="board.clock.canfdclk.source.disabled"/> + <node id="board.clock.cecclk.source" option="board.clock.cecclk.source.disabled"/> + <node id="board.clock.iclk.div" option="board.clock.iclk.div.1"/> + <node id="board.clock.pclka.div" option="board.clock.pclka.div.2"/> + <node id="board.clock.pclkb.div" option="board.clock.pclkb.div.4"/> + <node id="board.clock.pclkc.div" option="board.clock.pclkc.div.4"/> + <node id="board.clock.pclkd.div" option="board.clock.pclkd.div.2"/> + <node id="board.clock.bclk.div" option="board.clock.bclk.div.2"/> + <node id="board.clock.bclkout.div" option="board.clock.bclkout.div.2"/> + <node id="board.clock.fclk.div" option="board.clock.fclk.div.4"/> + <node id="board.clock.clkout.div" option="board.clock.clkout.div.1"/> + <node id="board.clock.uclk.div" option="board.clock.uclk.div.5"/> + <node id="board.clock.u60ck.div" option="board.clock.u60ck.div.4"/> + <node id="board.clock.octaspiclk.div" option="board.clock.octaspiclk.div.1"/> + <node id="board.clock.canfdclk.div" option="board.clock.canfdclk.div.1"/> + <node id="board.clock.cecclk.div" option="board.clock.cecclk.div.1"/> + <node id="board.clock.iclk.display" option="board.clock.iclk.display.value"/> + <node id="board.clock.pclka.display" option="board.clock.pclka.display.value"/> + <node id="board.clock.pclkb.display" option="board.clock.pclkb.display.value"/> + <node id="board.clock.pclkc.display" option="board.clock.pclkc.display.value"/> + <node id="board.clock.pclkd.display" option="board.clock.pclkd.display.value"/> + <node id="board.clock.bclk.display" option="board.clock.bclk.display.value"/> + <node id="board.clock.bclkout.display" option="board.clock.bclkout.display.value"/> + <node id="board.clock.fclk.display" option="board.clock.fclk.display.value"/> + <node id="board.clock.clkout.display" option="board.clock.clkout.display.value"/> + <node id="board.clock.uclk.display" option="board.clock.uclk.display.value"/> + <node id="board.clock.u60ck.display" option="board.clock.u60ck.display.value"/> + <node id="board.clock.octaspiclk.display" option="board.clock.octaspiclk.display.value"/> + <node id="board.clock.canfdclk.display" option="board.clock.canfdclk.display.value"/> + <node id="board.clock.cecclk.display" option="board.clock.cecclk.display.value"/> + </raClockConfiguration> + <raComponentSelection> + <component apiversion="" class="Common" condition="" group="all" subgroup="fsp_common" variant="" vendor="Renesas" version="5.6.0"> + <description>Board Support Package Common Files</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_ioport" variant="" vendor="Renesas" version="5.6.0"> + <description>I/O Port</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="CMSIS" condition="" group="CMSIS5" subgroup="CoreM" variant="" vendor="Arm" version="6.1.0+fsp.5.6.0"> + <description>Arm CMSIS Version 6 - Core (M)</description> + <originalPack>Arm.CMSIS6.6.1.0+fsp.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="Board" subgroup="custom" variant="" vendor="Renesas" version="5.6.0"> + <description>Custom Board Support Files</description> + <originalPack>Renesas.RA_board_custom.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m5" subgroup="device" variant="R7FA6M5BH3CFC" vendor="Renesas" version="5.6.0"> + <description>Board support package for R7FA6M5BH3CFC</description> + <originalPack>Renesas.RA_mcu_ra6m5.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m5" subgroup="device" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA6M5</description> + <originalPack>Renesas.RA_mcu_ra6m5.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m5" subgroup="fsp" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA6M5 - FSP Data</description> + <originalPack>Renesas.RA_mcu_ra6m5.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m5" subgroup="events" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA6M5 - Events</description> + <originalPack>Renesas.RA_mcu_ra6m5.5.6.0.pack</originalPack> + </component> + </raComponentSelection> + <raElcConfiguration/> + <raIcuConfiguration/> + <raModuleConfiguration> + <module id="module.driver.ioport_on_ioport.0"> + <property id="module.driver.ioport.name" value="g_ioport"/> + <property id="module.driver.ioport.elc_trigger_ioport1" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport2" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport3" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport4" value="_disabled"/> + <property id="module.driver.ioport.pincfg" value="g_bsp_pin_cfg"/> + </module> + <context id="_hal.0"> + <stack module="module.driver.ioport_on_ioport.0"/> + </context> + <config id="config.driver.ioport"> + <property id="config.driver.ioport.checking" value="config.driver.ioport.checking.system"/> + </config> + </raModuleConfiguration> + <raPinConfiguration> + <symbolicName propertyId="p107.symbolic_name" value="LED1"/> + <symbolicName propertyId="p408.symbolic_name" value="SW1"/> + <pincfg active="true" name="R7FA6M5BH3CFC.pincfg" selected="true" symbol="g_bsp_pin_cfg"> + <configSetting altId="debug0.mode.swd" configurationId="debug0.mode"/> + <configSetting altId="debug0.swclk.p300" configurationId="debug0.swclk"/> + <configSetting altId="debug0.swdio.p108" configurationId="debug0.swdio"/> + <configSetting altId="p107.output.low" configurationId="p107"/> + <configSetting altId="p107.gpio_mode.gpio_mode_out.low" configurationId="p107.gpio_mode"/> + <configSetting altId="p108.debug0.swdio" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p300.debug0.swclk" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + <configSetting altId="p407.usbfs0.vbus" configurationId="p407"/> + <configSetting altId="p407.gpio_mode.gpio_mode_peripheral" configurationId="p407.gpio_mode"/> + <configSetting altId="p408.input" configurationId="p408"/> + <configSetting altId="p408.gpio_mode.gpio_mode_in" configurationId="p408.gpio_mode"/> + <configSetting altId="p408.gpio_pupd.gpio_pupd_ip_up" configurationId="p408.gpio_pupd"/> + <configSetting altId="pb01.usbhs0.vbus" configurationId="pb01"/> + <configSetting altId="pb01.gpio_mode.gpio_mode_peripheral" configurationId="pb01.gpio_mode"/> + <configSetting altId="usbfs0.mode.device" configurationId="usbfs0.mode"/> + <configSetting altId="usbfs0.vbus.p407" configurationId="usbfs0.vbus"/> + <configSetting altId="usbhs0.mode.device" configurationId="usbhs0.mode"/> + <configSetting altId="usbhs0.vbus.pb01" configurationId="usbhs0.vbus"/> + </pincfg> + </raPinConfiguration> +</raConfiguration> diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.h b/hw/bsp/ra/boards/ra2a1_ek/board.h index 1c2b666d2..ba663d040 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/board.h +++ b/hw/bsp/ra/boards/ra2a1_ek/board.h @@ -31,21 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_02_PIN_05 -#define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_02_PIN_06 +#define LED_STATE_ON 1 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, - {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, - // USB FS D+, D-, VBus - {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, -}; - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 30637c17b..000000000 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,62 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ -#ifdef __cplusplus - extern "C" { - #endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (2) - #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) - #else -#define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) - #endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x400) -#define BSP_CFG_HEAP_BYTES (0x400) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus - } - #endif -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 710e85b28..000000000 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA2A1AB3CFM -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (64) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index 6caef62cc..000000000 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,84 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ -#ifdef __cplusplus - extern "C" { - #endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" -#define BSP_MCU_GROUP_RA2A1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) - #elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) - #elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) - #else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" - #endif - -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) - #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) - #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#ifdef __cplusplus - } - #endif -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..bf1fe0cc6 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x400) + #define BSP_CFG_HEAP_BYTES (0x400) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h index eb82f4697..eb82f4697 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..6970e4c33 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA2A1AB3CFM + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (262144) + #define BSP_RAM_SIZE_BYTES (32768) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (64) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..24e3efaa2 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,89 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA2A1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (0) + + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) + #define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC) + #define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF) + #define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC) + #define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) + #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #endif + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + + /* + ID Code + Note: To lock and disable the debug interface define BSP_ID_CODE_LOCKED in compiler settings. + WARNING: This will disable debug access to the part. However, ALeRASE command will be accepted, which will clear (reset) the ID code. After clearing ID code, debug access will be enabled. + */ + #if defined(BSP_ID_CODE_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) + #endif + + #if (0) + #define BSP_SECTION_FLASH_GAP BSP_PLACE_IN_SECTION(".flash_gap") + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..fc48a5809 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define LED1 (BSP_IO_PORT_02_PIN_05) +#define SW1 (BSP_IO_PORT_02_PIN_06) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA2A1-EK.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h index cd9d135f7..6b41669d3 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h @@ -8,7 +8,7 @@ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ #define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ #define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ #define BSP_CFG_SDADC_CLOCK_SOURCE (0) /* SDADCCLK Src: HOCO */ #define BSP_CFG_SDADCCLK_DIV (7) /* SDADCCLK Div /12 */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include <stdint.h> +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..7fed32687 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/pin_data.c @@ -0,0 +1,115 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_00_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_02_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_04_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_09_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra2a1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra2a1_ek/script/fsp.ld new file mode 100644 index 000000000..605eef7d2 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/script/fsp.ld @@ -0,0 +1,769 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra2a1_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra2a1_ek/script/memory_regions.ld new file mode 100644 index 000000000..2d6992fed --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x8000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x40000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x01010018; + ID_CODE_LENGTH = 0x20; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x0; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra2a1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra2a1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..beeeb67f2 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/smart_configurator/configuration.xml @@ -0,0 +1,258 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<raConfiguration version="9"> + <generalSettings> + <option key="#Board#" value="board.ra2a1_ek"/> + <option key="CPU" value="RA2A1"/> + <option key="Core" value="CM23"/> + <option key="#TargetName#" value="R7FA2A1AB3CFM"/> + <option key="#TargetARCHITECTURE#" value="cortex-m23"/> + <option key="#DeviceCommand#" value="R7FA2A1AB"/> + <option key="#RTOS#" value="_none"/> + <option key="#pinconfiguration#" value="R7FA2A1AB3CFM.pincfg"/> + <option key="#FSPVersion#" value="5.6.0"/> + <option key="#ConfigurationFragments#" value="Renesas##BSP##Board##ra2a1_ek##"/> + <option key="#SELECTED_TOOLCHAIN#" value="com.renesas.cdt.managedbuild.gnuarm.toolchain."/> + </generalSettings> + <raBspConfiguration> + <config id="config.bsp.ra2a1.R7FA2A1AB3CFM"> + <property id="config.bsp.part_number" value="config.bsp.part_number.value"/> + <property id="config.bsp.rom_size_bytes" value="config.bsp.rom_size_bytes.value"/> + <property id="config.bsp.rom_size_bytes_hidden" value="262144"/> + <property id="config.bsp.ram_size_bytes" value="config.bsp.ram_size_bytes.value"/> + <property id="config.bsp.data_flash_size_bytes" value="config.bsp.data_flash_size_bytes.value"/> + <property id="config.bsp.package_style" value="config.bsp.package_style.value"/> + <property id="config.bsp.package_pins" value="config.bsp.package_pins.value"/> + <property id="config.bsp.irq_count_hidden" value="32"/> + </config> + <config id="config.bsp.ra2a1"> + <property id="config.bsp.series" value="config.bsp.series.value"/> + </config> + <config id="config.bsp.ra2a1.fsp"> + <property id="config.bsp.fsp.inline_irq_functions" value="config.bsp.common.inline_irq_functions.disabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_start_mode" value="config.bsp.fsp.OFS0.iwdt_start_mode.disabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_timeout" value="config.bsp.fsp.OFS0.iwdt_timeout.2048"/> + <property id="config.bsp.fsp.OFS0.iwdt_divisor" value="config.bsp.fsp.OFS0.iwdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_end" value="config.bsp.fsp.OFS0.iwdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_start" value="config.bsp.fsp.OFS0.iwdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.iwdt_reset_interrupt" value="config.bsp.fsp.OFS0.iwdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.iwdt_stop_control" value="config.bsp.fsp.OFS0.iwdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS0.wdt_start_mode" value="config.bsp.fsp.OFS0.wdt_start_mode.register"/> + <property id="config.bsp.fsp.OFS0.wdt_timeout" value="config.bsp.fsp.OFS0.wdt_timeout.16384"/> + <property id="config.bsp.fsp.OFS0.wdt_divisor" value="config.bsp.fsp.OFS0.wdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.wdt_window_end" value="config.bsp.fsp.OFS0.wdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.wdt_window_start" value="config.bsp.fsp.OFS0.wdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.wdt_reset_interrupt" value="config.bsp.fsp.OFS0.wdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.wdt_stop_control" value="config.bsp.fsp.OFS0.wdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0.start" value="config.bsp.fsp.OFS1.voltage_detection0.start.disabled"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0_level" value="config.bsp.fsp.OFS1.voltage_detection0_level.190"/> + <property id="config.bsp.fsp.OFS1.hoco_osc" value="config.bsp.fsp.OFS1.hoco_osc.enabled"/> + <property id="config.bsp.low_voltage_mode" value="config.bsp.low_voltage_mode.disabled"/> + <property id="config.bsp.fsp.mpu_pc0_enable" value="config.bsp.fsp.mpu_pc0_enable.disabled"/> + <property id="config.bsp.fsp.mpu_pc0_start" value="0x000FFFFC"/> + <property id="config.bsp.fsp.mpu_pc0_end" value="0x000FFFFF"/> + <property id="config.bsp.fsp.mpu_pc1_enable" value="config.bsp.fsp.mpu_pc1_enable.disabled"/> + <property id="config.bsp.fsp.mpu_pc1_start" value="0x000FFFFC"/> + <property id="config.bsp.fsp.mpu_pc1_end" value="0x000FFFFF"/> + <property id="config.bsp.fsp.mpu_reg0_enable" value="config.bsp.fsp.mpu_reg0_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg0_start" value="0x000FFFFC"/> + <property id="config.bsp.fsp.mpu_reg0_end" value="0x000FFFFF"/> + <property id="config.bsp.fsp.mpu_reg1_enable" value="config.bsp.fsp.mpu_reg1_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg1_start" value="0x200FFFFC"/> + <property id="config.bsp.fsp.mpu_reg1_end" value="0x200FFFFF"/> + <property id="config.bsp.fsp.mpu_reg2_enable" value="config.bsp.fsp.mpu_reg2_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg2_start" value="0x407FFFFC"/> + <property id="config.bsp.fsp.mpu_reg2_end" value="0x407FFFFF"/> + <property id="config.bsp.fsp.mpu_reg3_enable" value="config.bsp.fsp.mpu_reg3_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg3_start" value="0x400DFFFC"/> + <property id="config.bsp.fsp.mpu_reg3_end" value="0x400DFFFF"/> + <property id="config.bsp.common.main_osc_wait" value="config.bsp.common.main_osc_wait.wait_8163"/> + <property id="config.bsp.fsp.mcu.adc.max_freq_hz" value="32000000"/> + <property id="config.bsp.fsp.mcu.sci_uart.max_baud" value="3333333"/> + <property id="config.bsp.fsp.mcu.adc.sample_and_hold" value="0"/> + <property id="config.bsp.fsp.mcu.adc.sensors_are_exclusive" value="1"/> + <property id="config.bsp.fsp.mcu.sci_spi.max_bitrate" value="8000000"/> + <property id="config.bsp.fsp.mcu.spi.max_bitrate" value="16000000"/> + <property id="config.bsp.fsp.mcu.iic_master.rate.rate_fastplus" value="0"/> + <property id="config.bsp.fsp.mcu.iic_master.fastplus_channels" value="0"/> + <property id="config.bsp.fsp.mcu.iic_slave.rate.rate_fastplus" value="0"/> + <property id="config.bsp.fsp.mcu.iic_slave.fastplus_channels" value="0x0"/> + <property id="config.bsp.fsp.mcu.sci_uart.cstpen_channels" value="0x0"/> + <property id="config.bsp.fsp.mcu.gpt.pin_count_source_channels" value="0xFFFF"/> + <property id="config.bsp.common.id_mode" value="config.bsp.common.id_mode.unlocked"/> + <property id="config.bsp.common.id_code" value="FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"/> + <property id="config.bsp.common.id1" value=""/> + <property id="config.bsp.common.id2" value=""/> + <property id="config.bsp.common.id3" value=""/> + <property id="config.bsp.common.id4" value=""/> + <property id="config.bsp.common.id_fixed" value=""/> + <property id="config.bsp.common.fill_flash_gap" value="config.bsp.common.fill_flash_gap.disabled"/> + </config> + <config id="config.bsp.ra"> + <property id="config.bsp.common.main" value="0x400"/> + <property id="config.bsp.common.heap" value="0x400"/> + <property id="config.bsp.common.vcc" value="3300"/> + <property id="config.bsp.common.checking" value="config.bsp.common.checking.disabled"/> + <property id="config.bsp.common.assert" value="config.bsp.common.assert.none"/> + <property id="config.bsp.common.error_log" value="config.bsp.common.error_log.none"/> + <property id="config.bsp.common.soft_reset" value="config.bsp.common.soft_reset.disabled"/> + <property id="config.bsp.common.main_osc_populated" value="config.bsp.common.main_osc_populated.enabled"/> + <property id="config.bsp.common.pfs_protect" value="config.bsp.common.pfs_protect.enabled"/> + <property id="config.bsp.common.c_runtime_init" value="config.bsp.common.c_runtime_init.enabled"/> + <property id="config.bsp.common.early_init" value="config.bsp.common.early_init.disabled"/> + <property id="config.bsp.common.main_osc_clock_source" value="config.bsp.common.main_osc_clock_source.crystal"/> + <property id="config.bsp.common.subclock_populated" value="config.bsp.common.subclock_populated.enabled"/> + <property id="config.bsp.common.subclock_drive" value="config.bsp.common.subclock_drive.standard"/> + <property id="config.bsp.common.subclock_stabilization_ms" value="1000"/> + </config> + </raBspConfiguration> + <raClockConfiguration> + <node id="board.clock.xtal.freq" mul="12000000" option="_edit"/> + <node id="board.clock.hoco.freq" option="board.clock.hoco.freq.48m"/> + <node id="board.clock.loco.freq" option="board.clock.loco.freq.32768"/> + <node id="board.clock.moco.freq" option="board.clock.moco.freq.8m"/> + <node id="board.clock.subclk.freq" option="board.clock.subclk.freq.32768"/> + <node id="board.clock.clock.source" option="board.clock.clock.source.hoco"/> + <node id="board.clock.iclk.div" option="board.clock.iclk.div.1"/> + <node id="board.clock.iclk.display" option="board.clock.iclk.display.value"/> + <node id="board.clock.pclkb.div" option="board.clock.pclkb.div.2"/> + <node id="board.clock.pclkb.display" option="board.clock.pclkb.display.value"/> + <node id="board.clock.pclkd.div" option="board.clock.pclkd.div.1"/> + <node id="board.clock.pclkd.display" option="board.clock.pclkd.display.value"/> + <node id="board.clock.fclk.div" option="board.clock.fclk.div.2"/> + <node id="board.clock.fclk.display" option="board.clock.fclk.display.value"/> + <node id="board.clock.uclk.display" option="board.clock.uclk.display.value"/> + <node id="board.clock.sdadcclk.source" option="board.clock.sdadcclk.source.hoco"/> + <node id="board.clock.sdadcclk.div" option="board.clock.sdadcclk.div.12"/> + <node id="board.clock.sdadcclk.display" option="board.clock.sdadcclk.display.value"/> + <node id="board.clock.clkout.source" option="board.clock.clkout.source.disabled"/> + <node id="board.clock.clkout.div" option="board.clock.clkout.div.1"/> + <node id="board.clock.clkout.display" option="board.clock.clkout.display.value"/> + </raClockConfiguration> + <raComponentSelection> + <component apiversion="" class="Projects" condition="" group="all" subgroup="baremetal_blinky" variant="" vendor="Renesas" version="5.6.0"> + <description>Simple application that blinks an LED. No RTOS included.</description> + <originalPack>Renesas.RA_baremetal_blinky.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="Common" condition="" group="all" subgroup="fsp_common" variant="" vendor="Renesas" version="5.6.0"> + <description>Board Support Package Common Files</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_ioport" variant="" vendor="Renesas" version="5.6.0"> + <description>I/O Port</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="CMSIS" condition="" group="CMSIS5" subgroup="CoreM" variant="" vendor="Arm" version="6.1.0+fsp.5.6.0"> + <description>Arm CMSIS Version 6 - Core (M)</description> + <originalPack>Arm.CMSIS6.6.1.0+fsp.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="Board" subgroup="ra2a1_ek" variant="" vendor="Renesas" version="5.6.0"> + <description>RA2A1-EK Board Support Files</description> + <originalPack>Renesas.RA_board_ra2a1_ek.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra2a1" subgroup="device" variant="R7FA2A1AB3CFM" vendor="Renesas" version="5.6.0"> + <description>Board support package for R7FA2A1AB3CFM</description> + <originalPack>Renesas.RA_mcu_ra2a1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra2a1" subgroup="device" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA2A1</description> + <originalPack>Renesas.RA_mcu_ra2a1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra2a1" subgroup="fsp" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA2A1 - FSP Data</description> + <originalPack>Renesas.RA_mcu_ra2a1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra2a1" subgroup="events" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA2A1 - Events</description> + <originalPack>Renesas.RA_mcu_ra2a1.5.6.0.pack</originalPack> + </component> + </raComponentSelection> + <raElcConfiguration/> + <raIcuConfiguration/> + <raModuleConfiguration> + <module id="module.driver.ioport_on_ioport.0"> + <property id="module.driver.ioport.name" value="g_ioport"/> + <property id="module.driver.ioport.elc_trigger_ioport1" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport2" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport3" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport4" value="_disabled"/> + <property id="module.driver.ioport.pincfg" value="g_bsp_pin_cfg"/> + </module> + <context id="_hal.0"> + <stack module="module.driver.ioport_on_ioport.0"/> + </context> + <config id="config.driver.ioport"> + <property id="config.driver.ioport.checking" value="config.driver.ioport.checking.system"/> + </config> + </raModuleConfiguration> + <raPinConfiguration> + <symbolicName propertyId="p205.symbolic_name" value="LED1"/> + <symbolicName propertyId="p206.symbolic_name" value="SW1"/> + <pincfg active="true" name="RA2A1-EK.pincfg" selected="true" symbol="g_bsp_pin_cfg"> + <configSetting altId="adc0.an06.p003" configurationId="adc0.an06"/> + <configSetting altId="adc0.mode.custom" configurationId="adc0.mode"/> + <configSetting altId="ctsu0.mode.enabled" configurationId="ctsu0.mode"/> + <configSetting altId="ctsu0.ts15.p001" configurationId="ctsu0.ts15"/> + <configSetting altId="ctsu0.tscap.p409" configurationId="ctsu0.tscap"/> + <configSetting altId="debug0.mode.swd" configurationId="debug0.mode"/> + <configSetting altId="debug0.swclk.p300" configurationId="debug0.swclk"/> + <configSetting altId="debug0.swdio.p108" configurationId="debug0.swdio"/> + <configSetting altId="p001.ctsu0.ts15" configurationId="p001"/> + <configSetting altId="p001.gpio_mode.gpio_mode_peripheral" configurationId="p001.gpio_mode"/> + <configSetting altId="p003.adc0.an06" configurationId="p003"/> + <configSetting altId="p003.gpio_mode.gpio_mode_an" configurationId="p003.gpio_mode"/> + <configSetting altId="p108.debug0.swdio" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p111.spi0.rspck" configurationId="p111"/> + <configSetting altId="p111.gpio_mode.gpio_mode_peripheral" configurationId="p111.gpio_mode"/> + <configSetting altId="p112.spi0.ssl0" configurationId="p112"/> + <configSetting altId="p112.gpio_mode.gpio_mode_peripheral" configurationId="p112.gpio_mode"/> + <configSetting altId="p201.input" configurationId="p201"/> + <configSetting altId="p201.gpio_mode.gpio_mode_in" configurationId="p201.gpio_mode"/> + <configSetting altId="p204.sci0.rxd" configurationId="p204"/> + <configSetting altId="p204.gpio_mode.gpio_mode_peripheral" configurationId="p204.gpio_mode"/> + <configSetting altId="p205.output.low" configurationId="p205"/> + <configSetting altId="p205.gpio_mode.gpio_mode_out.low" configurationId="p205.gpio_mode"/> + <configSetting altId="p206.input" configurationId="p206"/> + <configSetting altId="p206.gpio_mode.gpio_mode_in" configurationId="p206.gpio_mode"/> + <configSetting altId="p206.gpio_pupd.gpio_pupd_ip_up" configurationId="p206.gpio_pupd"/> + <configSetting altId="p300.debug0.swclk" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + <configSetting altId="p303.spi0.mosi" configurationId="p303"/> + <configSetting altId="p303.gpio_mode.gpio_mode_peripheral" configurationId="p303.gpio_mode"/> + <configSetting altId="p304.spi0.miso" configurationId="p304"/> + <configSetting altId="p304.gpio_mode.gpio_mode_peripheral" configurationId="p304.gpio_mode"/> + <configSetting altId="p407.usbfs0.vbus" configurationId="p407"/> + <configSetting altId="p407.gpio_mode.gpio_mode_peripheral" configurationId="p407.gpio_mode"/> + <configSetting altId="p409.ctsu0.tscap" configurationId="p409"/> + <configSetting altId="p409.gpio_mode.gpio_mode_peripheral" configurationId="p409.gpio_mode"/> + <configSetting altId="p411.sci0.txd" configurationId="p411"/> + <configSetting altId="p411.gpio_mode.gpio_mode_peripheral" configurationId="p411.gpio_mode"/> + <configSetting altId="p914.usbfs0.dp" configurationId="p914"/> + <configSetting altId="p914.gpio_mode.gpio_mode_peripheral" configurationId="p914.gpio_mode"/> + <configSetting altId="p915.usbfs0.dm" configurationId="p915"/> + <configSetting altId="p915.gpio_mode.gpio_mode_peripheral" configurationId="p915.gpio_mode"/> + <configSetting altId="sci0.mode.asynchronous.free" configurationId="sci0.mode"/> + <configSetting altId="sci0.rxd.p204" configurationId="sci0.rxd"/> + <configSetting altId="sci0.txd.p411" configurationId="sci0.txd"/> + <configSetting altId="spi0.miso.p304" configurationId="spi0.miso"/> + <configSetting altId="spi0.mode.enabled.b" configurationId="spi0.mode"/> + <configSetting altId="spi0.mosi.p303" configurationId="spi0.mosi"/> + <configSetting altId="spi0.pairing.b" configurationId="spi0.pairing"/> + <configSetting altId="spi0.rspck.p111" configurationId="spi0.rspck"/> + <configSetting altId="spi0.ssl0.p112" configurationId="spi0.ssl0"/> + <configSetting altId="usbfs0.dm.p915" configurationId="usbfs0.dm"/> + <configSetting altId="usbfs0.dp.p914" configurationId="usbfs0.dp"/> + <configSetting altId="usbfs0.mode.device" configurationId="usbfs0.mode"/> + <configSetting altId="usbfs0.vbus.p407" configurationId="usbfs0.vbus"/> + </pincfg> + <pincfg active="false" name="R7FA2A1AB3CFM.pincfg" selected="false" symbol=""> + <configSetting altId="debug0.mode.swd" configurationId="debug0.mode"/> + <configSetting altId="debug0.swclk.p300" configurationId="debug0.swclk"/> + <configSetting altId="debug0.swdio.p108" configurationId="debug0.swdio"/> + <configSetting altId="p108.debug0.swdio" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p300.debug0.swclk" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + </pincfg> + </raPinConfiguration> +</raConfiguration> diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.h b/hw/bsp/ra/boards/ra4m1_ek/board.h index c132387bc..ba663d040 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/board.h +++ b/hw/bsp/ra/boards/ra4m1_ek/board.h @@ -31,21 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_01_PIN_06 -#define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_01_PIN_05 +#define LED_STATE_ON 1 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, - {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, - // USB FS D+, D-, VBus - {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, -}; - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 11d5795df..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,35 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#undef RA_NOT_DEFINED -#define BSP_CFG_RTOS (0) -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) - -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 - -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index d810dabb2..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA4M1AB3CFP -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (100) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index 72cdb89e6..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,78 +0,0 @@ -/* generated configuration header file through renesas e2 studio */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA4M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 - #define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) -#elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) -#elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) - #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) - #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..43b0f5b65 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x800) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h index 444d32e56..444d32e56 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..243fad9b6 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M1AB3CFP + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (262144) + #define BSP_RAM_SIZE_BYTES (32768) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (100) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..3d482b2b6 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,84 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra4m1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA4M1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) + + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) + #define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) + #define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) + #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #endif + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + + /* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ + #if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..f77a5bcec --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define SW1 (BSP_IO_PORT_01_PIN_05) +#define LED1 (BSP_IO_PORT_01_PIN_06) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA4M1-EK.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h index 554126523..81ac5dc11 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h @@ -7,7 +7,7 @@ #define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ #define BSP_CFG_HOCO_FREQUENCY (0) /* HOCO 24MHz */ #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */ -#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(8u,0u)) /* PLL Mul x8 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(8U,0U) /* PLL Mul x8 */ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include <stdint.h> +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..baa713443 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/pin_data.c @@ -0,0 +1,119 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_04_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_04_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_04_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld new file mode 100644 index 000000000..605eef7d2 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld @@ -0,0 +1,769 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra4m1_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra4m1_ek/script/memory_regions.ld new file mode 100644 index 000000000..2d6992fed --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x8000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x40000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x01010018; + ID_CODE_LENGTH = 0x20; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x0; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra4m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra4m1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..2ca7fe595 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/smart_configurator/configuration.xml @@ -0,0 +1,271 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<raConfiguration version="9"> + <generalSettings> + <option key="#Board#" value="board.ra4m1ek"/> + <option key="CPU" value="RA4M1"/> + <option key="Core" value="CM4"/> + <option key="#TargetName#" value="R7FA4M1AB3CFP"/> + <option key="#TargetARCHITECTURE#" value="cortex-m4"/> + <option key="#DeviceCommand#" value="R7FA4M1AB"/> + <option key="#RTOS#" value="_none"/> + <option key="#pinconfiguration#" value="R7FA4M1AB3CFP.pincfg"/> + <option key="#FSPVersion#" value="5.6.0"/> + <option key="#ConfigurationFragments#" value="Renesas##BSP##Board##ra4m1_ek##"/> + <option key="#SELECTED_TOOLCHAIN#" value="com.renesas.cdt.managedbuild.gnuarm.toolchain."/> + </generalSettings> + <raBspConfiguration> + <config id="config.bsp.ra4m1.R7FA4M1AB3CFP"> + <property id="config.bsp.part_number" value="config.bsp.part_number.value"/> + <property id="config.bsp.rom_size_bytes" value="config.bsp.rom_size_bytes.value"/> + <property id="config.bsp.rom_size_bytes_hidden" value="262144"/> + <property id="config.bsp.ram_size_bytes" value="config.bsp.ram_size_bytes.value"/> + <property id="config.bsp.data_flash_size_bytes" value="config.bsp.data_flash_size_bytes.value"/> + <property id="config.bsp.package_style" value="config.bsp.package_style.value"/> + <property id="config.bsp.package_pins" value="config.bsp.package_pins.value"/> + <property id="config.bsp.irq_count_hidden" value="32"/> + </config> + <config id="config.bsp.ra4m1"> + <property id="config.bsp.series" value="config.bsp.series.value"/> + </config> + <config id="config.bsp.ra4m1.fsp"> + <property id="config.bsp.fsp.inline_irq_functions" value="config.bsp.common.inline_irq_functions.enabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_start_mode" value="config.bsp.fsp.OFS0.iwdt_start_mode.disabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_timeout" value="config.bsp.fsp.OFS0.iwdt_timeout.2048"/> + <property id="config.bsp.fsp.OFS0.iwdt_divisor" value="config.bsp.fsp.OFS0.iwdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_end" value="config.bsp.fsp.OFS0.iwdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_start" value="config.bsp.fsp.OFS0.iwdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.iwdt_reset_interrupt" value="config.bsp.fsp.OFS0.iwdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.iwdt_stop_control" value="config.bsp.fsp.OFS0.iwdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS0.wdt_start_mode" value="config.bsp.fsp.OFS0.wdt_start_mode.register"/> + <property id="config.bsp.fsp.OFS0.wdt_timeout" value="config.bsp.fsp.OFS0.wdt_timeout.16384"/> + <property id="config.bsp.fsp.OFS0.wdt_divisor" value="config.bsp.fsp.OFS0.wdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.wdt_window_end" value="config.bsp.fsp.OFS0.wdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.wdt_window_start" value="config.bsp.fsp.OFS0.wdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.wdt_reset_interrupt" value="config.bsp.fsp.OFS0.wdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.wdt_stop_control" value="config.bsp.fsp.OFS0.wdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0.start" value="config.bsp.fsp.OFS1.voltage_detection0.start.disabled"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0_level" value="config.bsp.fsp.OFS1.voltage_detection0_level.190"/> + <property id="config.bsp.fsp.OFS1.hoco_osc" value="config.bsp.fsp.OFS1.hoco_osc.enabled"/> + <property id="config.bsp.low_voltage_mode" value="config.bsp.low_voltage_mode.disabled"/> + <property id="config.bsp.fsp.mpu_pc0_enable" value="config.bsp.fsp.mpu_pc0_enable.disabled"/> + <property id="config.bsp.fsp.mpu_pc0_start" value="0x00FFFFFC"/> + <property id="config.bsp.fsp.mpu_pc0_end" value="0x00FFFFFF"/> + <property id="config.bsp.fsp.mpu_pc1_enable" value="config.bsp.fsp.mpu_pc1_enable.disabled"/> + <property id="config.bsp.fsp.mpu_pc1_start" value="0x00FFFFFC"/> + <property id="config.bsp.fsp.mpu_pc1_end" value="0x00FFFFFF"/> + <property id="config.bsp.fsp.mpu_reg0_enable" value="config.bsp.fsp.mpu_reg0_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg0_start" value="0x00FFFFFC"/> + <property id="config.bsp.fsp.mpu_reg0_end" value="0x00FFFFFF"/> + <property id="config.bsp.fsp.mpu_reg1_enable" value="config.bsp.fsp.mpu_reg1_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg1_start" value="0x200FFFFC"/> + <property id="config.bsp.fsp.mpu_reg1_end" value="0x200FFFFF"/> + <property id="config.bsp.fsp.mpu_reg2_enable" value="config.bsp.fsp.mpu_reg2_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg2_start" value="0x407FFFFC"/> + <property id="config.bsp.fsp.mpu_reg2_end" value="0x407FFFFF"/> + <property id="config.bsp.fsp.mpu_reg3_enable" value="config.bsp.fsp.mpu_reg3_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg3_start" value="0x400DFFFC"/> + <property id="config.bsp.fsp.mpu_reg3_end" value="0x400DFFFF"/> + <property id="config.bsp.common.main_osc_wait" value="config.bsp.common.main_osc_wait.wait_8163"/> + <property id="config.bsp.fsp.mcu.adc.max_freq_hz" value="64000000"/> + <property id="config.bsp.fsp.mcu.sci_uart.max_baud" value="6666666"/> + <property id="config.bsp.fsp.mcu.adc.sample_and_hold" value="0"/> + <property id="config.bsp.fsp.mcu.adc.sensors_are_exclusive" value="1"/> + <property id="config.bsp.fsp.mcu.sci_spi.max_bitrate" value="12000000"/> + <property id="config.bsp.fsp.mcu.spi.max_bitrate" value="24000000"/> + <property id="config.bsp.fsp.mcu.iic_master.rate.rate_fastplus" value="0"/> + <property id="config.bsp.fsp.mcu.iic_master.fastplus_channels" value="0"/> + <property id="config.bsp.fsp.mcu.iic_slave.rate.rate_fastplus" value="0"/> + <property id="config.bsp.fsp.mcu.iic_slave.fastplus_channels" value="0x0"/> + <property id="config.bsp.fsp.mcu.sci_uart.cstpen_channels" value="0x0"/> + <property id="config.bsp.fsp.mcu.gpt.pin_count_source_channels" value="0xFFFF"/> + <property id="config.bsp.fsp.mcu.slcdc.1_4_bias_method" value="1"/> + <property id="config.bsp.common.id_mode" value="config.bsp.common.id_mode.unlocked"/> + <property id="config.bsp.common.id_code" value="FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"/> + <property id="config.bsp.common.id1" value=""/> + <property id="config.bsp.common.id2" value=""/> + <property id="config.bsp.common.id3" value=""/> + <property id="config.bsp.common.id4" value=""/> + <property id="config.bsp.common.id_fixed" value=""/> + </config> + <config id="config.bsp.ra"> + <property id="config.bsp.common.main" value="0x800"/> + <property id="config.bsp.common.heap" value="0x1000"/> + <property id="config.bsp.common.vcc" value="3300"/> + <property id="config.bsp.common.checking" value="config.bsp.common.checking.disabled"/> + <property id="config.bsp.common.assert" value="config.bsp.common.assert.none"/> + <property id="config.bsp.common.error_log" value="config.bsp.common.error_log.none"/> + <property id="config.bsp.common.soft_reset" value="config.bsp.common.soft_reset.disabled"/> + <property id="config.bsp.common.main_osc_populated" value="config.bsp.common.main_osc_populated.enabled"/> + <property id="config.bsp.common.pfs_protect" value="config.bsp.common.pfs_protect.enabled"/> + <property id="config.bsp.common.c_runtime_init" value="config.bsp.common.c_runtime_init.enabled"/> + <property id="config.bsp.common.early_init" value="config.bsp.common.early_init.disabled"/> + <property id="config.bsp.common.main_osc_clock_source" value="config.bsp.common.main_osc_clock_source.crystal"/> + <property id="config.bsp.common.subclock_populated" value="config.bsp.common.subclock_populated.enabled"/> + <property id="config.bsp.common.subclock_drive" value="config.bsp.common.subclock_drive.standard"/> + <property id="config.bsp.common.subclock_stabilization_ms" value="1000"/> + </config> + </raBspConfiguration> + <raClockConfiguration> + <node id="board.clock.xtal.freq" mul="12000000" option="_edit"/> + <node id="board.clock.pll.source" option="board.clock.pll.source.xtal"/> + <node id="board.clock.hoco.freq" option="board.clock.hoco.freq.24m"/> + <node id="board.clock.loco.freq" option="board.clock.loco.freq.32768"/> + <node id="board.clock.moco.freq" option="board.clock.moco.freq.8m"/> + <node id="board.clock.subclk.freq" option="board.clock.subclk.freq.32768"/> + <node id="board.clock.pll.div" option="board.clock.pll.div.2"/> + <node id="board.clock.pll.mul" option="board.clock.pll.mul.8"/> + <node id="board.clock.pll.display" option="board.clock.pll.display.value"/> + <node id="board.clock.clock.source" option="board.clock.clock.source.pll"/> + <node id="board.clock.iclk.div" option="board.clock.iclk.div.1"/> + <node id="board.clock.iclk.display" option="board.clock.iclk.display.value"/> + <node id="board.clock.pclka.div" option="board.clock.pclka.div.1"/> + <node id="board.clock.pclka.display" option="board.clock.pclka.display.value"/> + <node id="board.clock.pclkb.div" option="board.clock.pclkb.div.2"/> + <node id="board.clock.pclkb.display" option="board.clock.pclkb.display.value"/> + <node id="board.clock.pclkc.div" option="board.clock.pclkc.div.1"/> + <node id="board.clock.pclkc.display" option="board.clock.pclkc.display.value"/> + <node id="board.clock.pclkd.div" option="board.clock.pclkd.div.1"/> + <node id="board.clock.pclkd.display" option="board.clock.pclkd.display.value"/> + <node id="board.clock.fclk.div" option="board.clock.fclk.div.2"/> + <node id="board.clock.fclk.display" option="board.clock.fclk.display.value"/> + <node id="board.clock.clkout.source" option="board.clock.clkout.source.disabled"/> + <node id="board.clock.clkout.div" option="board.clock.clkout.div.1"/> + <node id="board.clock.clkout.display" option="board.clock.clkout.display.value"/> + <node id="board.clock.uclk.source" option="board.clock.uclk.source.pll"/> + <node id="board.clock.uclk.display" option="board.clock.clkout.display.value"/> + </raClockConfiguration> + <raComponentSelection> + <component apiversion="" class="Projects" condition="" group="all" subgroup="baremetal_blinky" variant="" vendor="Renesas" version="5.6.0"> + <description>Simple application that blinks an LED. No RTOS included.</description> + <originalPack>Renesas.RA_baremetal_blinky.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="Common" condition="" group="all" subgroup="fsp_common" variant="" vendor="Renesas" version="5.6.0"> + <description>Board Support Package Common Files</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_ioport" variant="" vendor="Renesas" version="5.6.0"> + <description>I/O Port</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="CMSIS" condition="" group="CMSIS5" subgroup="CoreM" variant="" vendor="Arm" version="6.1.0+fsp.5.6.0"> + <description>Arm CMSIS Version 6 - Core (M)</description> + <originalPack>Arm.CMSIS6.6.1.0+fsp.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="Board" subgroup="ra4m1_ek" variant="" vendor="Renesas" version="5.6.0"> + <description>RA4M1-EK Board Support Files</description> + <originalPack>Renesas.RA_board_ra4m1_ek.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m1" subgroup="device" variant="R7FA4M1AB3CFP" vendor="Renesas" version="5.6.0"> + <description>Board support package for R7FA4M1AB3CFP</description> + <originalPack>Renesas.RA_mcu_ra4m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m1" subgroup="device" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA4M1</description> + <originalPack>Renesas.RA_mcu_ra4m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m1" subgroup="fsp" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA4M1 - FSP Data</description> + <originalPack>Renesas.RA_mcu_ra4m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m1" subgroup="events" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA4M1 - Events</description> + <originalPack>Renesas.RA_mcu_ra4m1.5.6.0.pack</originalPack> + </component> + </raComponentSelection> + <raElcConfiguration/> + <raIcuConfiguration/> + <raModuleConfiguration> + <module id="module.driver.ioport_on_ioport.0"> + <property id="module.driver.ioport.name" value="g_ioport"/> + <property id="module.driver.ioport.elc_trigger_ioport1" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport2" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport3" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport4" value="_disabled"/> + <property id="module.driver.ioport.pincfg" value="g_bsp_pin_cfg"/> + </module> + <context id="_hal.0"> + <stack module="module.driver.ioport_on_ioport.0"/> + </context> + <config id="config.driver.ioport"> + <property id="config.driver.ioport.checking" value="config.driver.ioport.checking.system"/> + </config> + </raModuleConfiguration> + <raPinConfiguration> + <symbolicName propertyId="p105.symbolic_name" value="SW1"/> + <symbolicName propertyId="p106.symbolic_name" value="LED1"/> + <pincfg active="true" name="RA4M1-EK.pincfg" selected="true" symbol="g_bsp_pin_cfg"> + <configSetting altId="adc0.an04.p004" configurationId="adc0.an04"/> + <configSetting altId="adc0.mode.custom" configurationId="adc0.mode"/> + <configSetting altId="ctsu0.mode.enabled" configurationId="ctsu0.mode"/> + <configSetting altId="ctsu0.ts35.p115" configurationId="ctsu0.ts35"/> + <configSetting altId="ctsu0.tscap.p205" configurationId="ctsu0.tscap"/> + <configSetting altId="debug0.mode.swd" configurationId="debug0.mode"/> + <configSetting altId="debug0.swclk.p300" configurationId="debug0.swclk"/> + <configSetting altId="debug0.swdio.p108" configurationId="debug0.swdio"/> + <configSetting altId="p004.adc0.an04" configurationId="p004"/> + <configSetting altId="p004.gpio_mode.gpio_mode_an" configurationId="p004.gpio_mode"/> + <configSetting altId="p100.spi0.miso" configurationId="p100"/> + <configSetting altId="p100.gpio_mode.gpio_mode_peripheral" configurationId="p100.gpio_mode"/> + <configSetting altId="p101.spi0.mosi" configurationId="p101"/> + <configSetting altId="p101.gpio_mode.gpio_mode_peripheral" configurationId="p101.gpio_mode"/> + <configSetting altId="p102.spi0.rspck" configurationId="p102"/> + <configSetting altId="p102.gpio_mode.gpio_mode_peripheral" configurationId="p102.gpio_mode"/> + <configSetting altId="p103.spi0.ssl0" configurationId="p103"/> + <configSetting altId="p103.gpio_mode.gpio_mode_peripheral" configurationId="p103.gpio_mode"/> + <configSetting altId="p105.input" configurationId="p105"/> + <configSetting altId="p105.gpio_mode.gpio_mode_in" configurationId="p105.gpio_mode"/> + <configSetting altId="p105.gpio_pupd.gpio_pupd_ip_up" configurationId="p105.gpio_pupd"/> + <configSetting altId="p106.output.low" configurationId="p106"/> + <configSetting altId="p106.gpio_mode.gpio_mode_out.low" configurationId="p106.gpio_mode"/> + <configSetting altId="p108.debug0.swdio" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p115.ctsu0.ts35" configurationId="p115"/> + <configSetting altId="p115.gpio_mode.gpio_mode_peripheral" configurationId="p115.gpio_mode"/> + <configSetting altId="p205.ctsu0.tscap" configurationId="p205"/> + <configSetting altId="p205.gpio_mode.gpio_mode_peripheral" configurationId="p205.gpio_mode"/> + <configSetting altId="p300.debug0.swclk" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + <configSetting altId="p400.output.low" configurationId="p400"/> + <configSetting altId="p400.gpio_mode.gpio_mode_out.low" configurationId="p400.gpio_mode"/> + <configSetting altId="p401.sci1.txd" configurationId="p401"/> + <configSetting altId="p401.gpio_mode.gpio_mode_peripheral" configurationId="p401.gpio_mode"/> + <configSetting altId="p402.sci1.rxd" configurationId="p402"/> + <configSetting altId="p402.gpio_mode.gpio_mode_peripheral" configurationId="p402.gpio_mode"/> + <configSetting altId="p403.output.low" configurationId="p403"/> + <configSetting altId="p403.gpio_mode.gpio_mode_out.low" configurationId="p403.gpio_mode"/> + <configSetting altId="p407.usbfs0.vbus" configurationId="p407"/> + <configSetting altId="p407.gpio_mode.gpio_mode_peripheral" configurationId="p407.gpio_mode"/> + <configSetting altId="p914.usbfs0.usbdp" configurationId="p914"/> + <configSetting altId="p914.gpio_mode.gpio_mode_peripheral" configurationId="p914.gpio_mode"/> + <configSetting altId="p915.usbfs0.usbdm" configurationId="p915"/> + <configSetting altId="p915.gpio_mode.gpio_mode_peripheral" configurationId="p915.gpio_mode"/> + <configSetting altId="sci1.mode.asynchronous.free" configurationId="sci1.mode"/> + <configSetting altId="sci1.rxd.p402" configurationId="sci1.rxd"/> + <configSetting altId="sci1.txd.p401" configurationId="sci1.txd"/> + <configSetting altId="spi0.miso.p100" configurationId="spi0.miso"/> + <configSetting altId="spi0.mode.enabled.a" configurationId="spi0.mode"/> + <configSetting altId="spi0.mosi.p101" configurationId="spi0.mosi"/> + <configSetting altId="spi0.rspck.p102" configurationId="spi0.rspck"/> + <configSetting altId="spi0.ssl0.p103" configurationId="spi0.ssl0"/> + <configSetting altId="usbfs0.mode.device" configurationId="usbfs0.mode"/> + <configSetting altId="usbfs0.usbdm.p915" configurationId="usbfs0.usbdm"/> + <configSetting altId="usbfs0.usbdp.p914" configurationId="usbfs0.usbdp"/> + <configSetting altId="usbfs0.vbus.p407" configurationId="usbfs0.vbus"/> + </pincfg> + <pincfg active="false" name="R7FA4M1AB3CFP.pincfg" selected="false" symbol=""> + <configSetting altId="debug0.mode.jtag" configurationId="debug0.mode"/> + <configSetting altId="debug0.tck.p300" configurationId="debug0.tck"/> + <configSetting altId="debug0.tdi.p110" configurationId="debug0.tdi"/> + <configSetting altId="debug0.tdo.p109" configurationId="debug0.tdo"/> + <configSetting altId="debug0.tms.p108" configurationId="debug0.tms"/> + <configSetting altId="p108.debug0.tms" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p109.debug0.tdo" configurationId="p109"/> + <configSetting altId="p109.gpio_mode.gpio_mode_peripheral" configurationId="p109.gpio_mode"/> + <configSetting altId="p110.debug0.tdi" configurationId="p110"/> + <configSetting altId="p110.gpio_mode.gpio_mode_peripheral" configurationId="p110.gpio_mode"/> + <configSetting altId="p300.debug0.tck" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + </pincfg> + </raPinConfiguration> +</raConfiguration> diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 862ec25b7..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,63 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) -#define BSP_CFG_RTOS (1) -#else -#define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x800) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 1a0bc02e2..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA4M3AF3CFB -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (1048576) -#define BSP_RAM_SIZE_BYTES (131072) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (144) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..96087fa0d --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x800) + #define BSP_CFG_HEAP_BYTES (0x800) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h index 444d32e56..444d32e56 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..1aaa4be0a --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M3AF3CFB + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (1048576) + #define BSP_RAM_SIZE_BYTES (131072) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (144) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index d5428540f..cb9429057 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -5,80 +5,80 @@ extern "C" { #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA6M5 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra4m3/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA4M3 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif -#define BSP_CFG_FLL_ENABLE (0) + #define BSP_CFG_FLL_ENABLE (0) -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#if defined(_RA_TZ_SECURE) + #if defined(_RA_TZ_SECURE) #define BSP_TZ_SECURE_BUILD (1) #define BSP_TZ_NONSECURE_BUILD (0) #elif defined(_RA_TZ_NONSECURE) #define BSP_TZ_SECURE_BUILD (0) #define BSP_TZ_NONSECURE_BUILD (1) #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (0) + #endif -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + /* TrustZone Settings */ + #define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) + #define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) + #define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) + /* CMSIS TrustZone Settings */ + #define SCB_CSR_AIRCR_INIT (1) + #define SCB_AIRCR_BFHFNMINS_VAL (0) + #define SCB_AIRCR_SYSRESETREQS_VAL (1) + #define SCB_AIRCR_PRIS_VAL (0) + #define TZ_FPU_NS_USAGE (1) #ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) + #define SCB_NSACR_CP10_11_VAL (3U) #endif #ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) + #define FPU_FPCCR_TS_VAL (1U) #endif -#define FPU_FPCCR_CLRONRETS_VAL (1) + #define FPU_FPCCR_CLRONRETS_VAL (1) #ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) + #define FPU_FPCCR_CLRONRET_VAL (1) #endif -/* The C-Cache line size that is configured during startup. */ + /* The C-Cache line size that is configured during startup. */ #ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) + #define BSP_CFG_C_CACHE_LINE_SIZE (1U) #endif -/* Type 1 Peripheral Security Attribution */ + /* Type 1 Peripheral Security Attribution */ -/* Peripheral Security Attribution Register (PSAR) Settings */ + /* Peripheral Security Attribution Register (PSAR) Settings */ #ifndef BSP_TZ_CFG_PSARB #define BSP_TZ_CFG_PSARB (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* USBFS */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ @@ -146,19 +146,19 @@ extern "C" { 0xfffffffc) /* Unused */ #endif -/* Type 2 Peripheral Security Attribution */ + /* Type 2 Peripheral Security Attribution */ -/* Security attribution for Cache registers. */ + /* Security attribution for Cache registers. */ #ifndef BSP_TZ_CFG_CSAR #define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) #endif -/* Security attribution for RSTSRn registers. */ + /* Security attribution for RSTSRn registers. */ #ifndef BSP_TZ_CFG_RSTSAR #define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) #endif -/* Security attribution for registers of LVD channels. */ + /* Security attribution for registers of LVD channels. */ #ifndef BSP_TZ_CFG_LVDSAR #define BSP_TZ_CFG_LVDSAR (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ @@ -166,16 +166,16 @@ extern "C" { 0xFFFFFFFCU) #endif -/* Security attribution for LPM registers. */ + /* Security attribution for LPM registers. */ #ifndef BSP_TZ_CFG_LPMSAR #define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) #endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ + /* Deep Standby Interrupt Factor Security Attribution Register. */ #ifndef BSP_TZ_CFG_DPFSAR #define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) #endif -/* Security attribution for CGC registers. */ + /* Security attribution for CGC registers. */ #ifndef BSP_TZ_CFG_CGFSAR #if BSP_CFG_CLOCKS_SECURE /* Protect all CGC registers from Non-secure write access. */ @@ -186,12 +186,12 @@ extern "C" { #endif #endif -/* Security attribution for Battery Backup registers. */ + /* Security attribution for Battery Backup registers. */ #ifndef BSP_TZ_CFG_BBFSAR #define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) #endif -/* Security attribution for registers for IRQ channels. */ + /* Security attribution for registers for IRQ channels. */ #ifndef BSP_TZ_CFG_ICUSARA #define BSP_TZ_CFG_ICUSARA (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ @@ -213,12 +213,12 @@ extern "C" { 0xFFFF0000U) #endif -/* Security attribution for NMI registers. */ + /* Security attribution for NMI registers. */ #ifndef BSP_TZ_CFG_ICUSARB #define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ #endif -/* Security attribution for registers for DMAC channels */ + /* Security attribution for registers for DMAC channels */ #ifndef BSP_TZ_CFG_ICUSARC #define BSP_TZ_CFG_ICUSARC (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ @@ -232,29 +232,29 @@ extern "C" { 0xFFFFFF00U) #endif -/* Security attribution registers for SELSR0. */ + /* Security attribution registers for SELSR0. */ #ifndef BSP_TZ_CFG_ICUSARD #define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN0. */ + /* Security attribution registers for WUPEN0. */ #ifndef BSP_TZ_CFG_ICUSARE #define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN1. */ + /* Security attribution registers for WUPEN1. */ #ifndef BSP_TZ_CFG_ICUSARF #define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) #endif -/* Set DTCSTSAR if the Secure program uses the DTC. */ + /* Set DTCSTSAR if the Secure program uses the DTC. */ #if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) + #define BSP_TZ_CFG_DTC_USED (0U) #else #define BSP_TZ_CFG_DTC_USED (1U) #endif -/* Security attribution of FLWT and FCKMHZ registers. */ + /* Security attribution of FLWT and FCKMHZ registers. */ #ifndef BSP_TZ_CFG_FSAR /* If the CGC registers are only accessible in Secure mode, than there is no * reason for nonsecure applications to access FLWT and FCKMHZ. */ @@ -267,118 +267,119 @@ extern "C" { #endif #endif -/* Security attribution for SRAM registers. */ + /* Security attribution for SRAM registers. */ #ifndef BSP_TZ_CFG_SRAMSAR /* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ + #define BSP_TZ_CFG_SRAMSAR (\ 1 | \ ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ 4 | \ 0xFFFFFFF8U) #endif -/* Security attribution for Standby RAM registers. */ + /* Security attribution for Standby RAM registers. */ #ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) + #define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) #endif -/* Security attribution for the DMAC Bus Master MPU settings. */ + /* Security attribution for the DMAC Bus Master MPU settings. */ #ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) + /* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ + #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) #endif -/* Security Attribution Register A for BUS Control registers. */ + /* Security Attribution Register A for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) #endif -/* Security Attribution Register B for BUS Control registers. */ + /* Security Attribution Register B for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) #endif -/* Enable Uninitialized Non-Secure Application Fallback. */ + /* Enable Uninitialized Non-Secure Application Fallback. */ #ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) + #define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) #endif -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -/* Option Function Select Register 1 Security Attribution */ + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + + /* Option Function Select Register 1 Security Attribution */ #ifndef BSP_CFG_ROM_REG_OFS1_SEL #if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((0U << 0U)) | ((0U << 2U)) | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U)) #else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) #endif #endif -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* Dual Mode Select Register */ + /* Dual Mode Select Register */ #ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) + #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU) #endif -/* Block Protection Register 0 */ + /* Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS0 (~( 0U)) #endif -/* Block Protection Register 1 */ + /* Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS1 (~( 0U)) #endif -/* Block Protection Register 2 */ + /* Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU) #endif -/* Block Protection Register 3 */ + /* Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) #endif -/* Permanent Block Protection Register 0 */ + /* Permanent Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) #endif -/* Permanent Block Protection Register 1 */ + /* Permanent Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) #endif -/* Permanent Block Protection Register 2 */ + /* Permanent Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU) #endif -/* Permanent Block Protection Register 3 */ + /* Permanent Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) #endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) + #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) #endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) + #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) #endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) + #define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU) #endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) + #define BSP_CFG_ROM_REG_BPS_SEL3 (0xFFFFFFFFU) #endif #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) #endif #ifdef __cplusplus diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..8ed58a11b --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,67 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define ARDUINO_A0_MIKROBUS_AN (BSP_IO_PORT_00_PIN_00) +#define ARDUINO_A1 (BSP_IO_PORT_00_PIN_01) +#define ARDUINO_A2 (BSP_IO_PORT_00_PIN_03) +#define SW1 (BSP_IO_PORT_00_PIN_05) +#define SW2 (BSP_IO_PORT_00_PIN_06) +#define ARDUINO_A3 (BSP_IO_PORT_00_PIN_07) +#define PMOD1_INT (BSP_IO_PORT_00_PIN_08) +#define ARDUINO_A4 (BSP_IO_PORT_00_PIN_14) +#define ARDUINO_A5 (BSP_IO_PORT_00_PIN_15) +#define ARDUINO_RX_MIKROBUS_RX (BSP_IO_PORT_01_PIN_00) +#define ARDUINO_TX_MIKROBUS_TX (BSP_IO_PORT_01_PIN_01) +#define ARDUINO_D2 (BSP_IO_PORT_01_PIN_05) +#define ARDUINO_D3 (BSP_IO_PORT_01_PIN_11) +#define MIKROBUS_RST (BSP_IO_PORT_01_PIN_15) +#define ARDUINO_MISO_MIKROBUS_MISO_PMOD1_MISO (BSP_IO_PORT_02_PIN_02) +#define ARDUINO_MOSI_MIKROBUS_MOSI_PMOD1_MOSI (BSP_IO_PORT_02_PIN_03) +#define ARDUINO_CLK_MIKROBUS_CLK_PMOD1_CLK (BSP_IO_PORT_02_PIN_04) +#define ARDUINO_SS_MIKCRBUS_SS (BSP_IO_PORT_02_PIN_05) +#define PMOD1_SS1 (BSP_IO_PORT_02_PIN_06) +#define PMOD1_SS2 (BSP_IO_PORT_02_PIN_07) +#define PMOD1_SS3 (BSP_IO_PORT_03_PIN_02) +#define ARDUINO_D9 (BSP_IO_PORT_03_PIN_03) +#define ARDUINO_D7 (BSP_IO_PORT_03_PIN_04) +#define QSPI_CLK (BSP_IO_PORT_03_PIN_05) +#define QSPI_SSL (BSP_IO_PORT_03_PIN_06) +#define QSPI_IO0 (BSP_IO_PORT_03_PIN_07) +#define QSPI_IO1 (BSP_IO_PORT_03_PIN_08) +#define QSPI_IO2 (BSP_IO_PORT_03_PIN_09) +#define QSPI_IO3 (BSP_IO_PORT_03_PIN_10) +#define PMOD1_RST (BSP_IO_PORT_03_PIN_11) +#define LED3 (BSP_IO_PORT_04_PIN_00) +#define LED2 (BSP_IO_PORT_04_PIN_04) +#define USB_VBUS (BSP_IO_PORT_04_PIN_07) +#define ARDUINO_D6_MIKROBUS_PWM (BSP_IO_PORT_04_PIN_08) +#define MIKROBUS_INT (BSP_IO_PORT_04_PIN_09) +#define PMOD2_INT (BSP_IO_PORT_04_PIN_14) +#define LED1 (BSP_IO_PORT_04_PIN_15) +#define USB_VBUS_EN (BSP_IO_PORT_05_PIN_00) +#define USB_VBUS_OC (BSP_IO_PORT_05_PIN_01) +#define GROVE2_AN1 (BSP_IO_PORT_05_PIN_05) +#define GROVE2_AN2 (BSP_IO_PORT_05_PIN_06) +#define GROVE1_SDA_QWIIC_SDA (BSP_IO_PORT_05_PIN_11) +#define GROVE1_SCL_QWIIC_SCL (BSP_IO_PORT_05_PIN_12) +#define ARDUINO_SCL_MIKROBUS_SCL (BSP_IO_PORT_06_PIN_01) +#define ARDUINO_SDA_MIKROBUS_SDA (BSP_IO_PORT_06_PIN_02) +#define ARDUINO_D8 (BSP_IO_PORT_06_PIN_11) +#define ARDUINO_RST (BSP_IO_PORT_06_PIN_12) +#define PMOD2_RST (BSP_IO_PORT_07_PIN_08) +#define PMOD2_SS2 (BSP_IO_PORT_07_PIN_09) +#define PMOD2_SS3 (BSP_IO_PORT_07_PIN_10) +#define ARDUINO_D5 (BSP_IO_PORT_07_PIN_12) +#define ARDUINO_D4 (BSP_IO_PORT_07_PIN_13) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA4M3 EK */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h index 80641945d..3eac2985e 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h @@ -7,10 +7,10 @@ #define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ #define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ -#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL Mul x24.0 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(25U,0U) /* PLL Mul x25.0 */ #define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ -#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL2 Div /3 */ -#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL2 Mul x24.0 */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL2 Mul x20.0 */ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ #define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ #define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ @@ -21,5 +21,5 @@ #define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ #define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ #define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_4) /* UCLK Div /4 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ #endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include <stdint.h> +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..bf30782cf --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/pin_data.c @@ -0,0 +1,263 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_03_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_03_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_GPT1) + }, + { + .pin = BSP_IO_PORT_04_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_04_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_04_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_05_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_05_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_05_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_05_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_06_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_NMOS_ENABLE | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_06_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_NMOS_ENABLE | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_06_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_06_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld b/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld new file mode 100644 index 000000000..605eef7d2 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld @@ -0,0 +1,769 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra4m3_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra4m3_ek/script/memory_regions.ld new file mode 100644 index 000000000..04d7de497 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x20000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x100000; + DATA_FLASH_START = 0x08000000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x0100A100; + OPTION_SETTING_LENGTH = 0x100; + OPTION_SETTING_S_START = 0x0100A200; + OPTION_SETTING_S_LENGTH = 0x100; + ID_CODE_START = 0x00000000; + ID_CODE_LENGTH = 0x0; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra4m3_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra4m3_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..1d75f1b72 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/smart_configurator/configuration.xml @@ -0,0 +1,432 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<raConfiguration version="9"> + <generalSettings> + <option key="#Board#" value="board.ra4m3ek"/> + <option key="CPU" value="RA4M3"/> + <option key="Core" value="CM33"/> + <option key="#TargetName#" value="R7FA4M3AF3CFB"/> + <option key="#TargetARCHITECTURE#" value="cortex-m33"/> + <option key="#DeviceCommand#" value="R7FA4M3AF"/> + <option key="#RTOS#" value="_none"/> + <option key="#pinconfiguration#" value="R7FA4M3AF3CFB.pincfg"/> + <option key="#FSPVersion#" value="5.6.0"/> + <option key="#ConfigurationFragments#" value="Renesas##BSP##Board##ra4m3_ek##"/> + <option key="#SELECTED_TOOLCHAIN#" value="com.renesas.cdt.managedbuild.gnuarm.toolchain."/> + </generalSettings> + <raBspConfiguration> + <config id="config.bsp.ra4m3.R7FA4M3AF3CFB"> + <property id="config.bsp.part_number" value="config.bsp.part_number.value"/> + <property id="config.bsp.rom_size_bytes" value="config.bsp.rom_size_bytes.value"/> + <property id="config.bsp.rom_size_bytes_hidden" value="1048576"/> + <property id="config.bsp.ram_size_bytes" value="config.bsp.ram_size_bytes.value"/> + <property id="config.bsp.data_flash_size_bytes" value="config.bsp.data_flash_size_bytes.value"/> + <property id="config.bsp.package_style" value="config.bsp.package_style.value"/> + <property id="config.bsp.package_pins" value="config.bsp.package_pins.value"/> + <property id="config.bsp.irq_count_hidden" value="96"/> + </config> + <config id="config.bsp.ra4m3"> + <property id="config.bsp.series" value="config.bsp.series.value"/> + </config> + <config id="config.bsp.ra4m3.fsp"> + <property id="config.bsp.fsp.inline_irq_functions" value="config.bsp.common.inline_irq_functions.enabled"/> + <property id="config.bsp.fsp.tz.exception_response" value="config.bsp.fsp.tz.exception_response.nmi"/> + <property id="config.bsp.fsp.tz.cmsis.bfhfnmins" value="config.bsp.fsp.tz.cmsis.bfhfnmins.secure"/> + <property id="config.bsp.fsp.tz.cmsis.sysresetreqs" value="config.bsp.fsp.tz.cmsis.sysresetreqs.secure_only"/> + <property id="config.bsp.fsp.tz.cmsis.s_priority_boost" value="config.bsp.fsp.tz.cmsis.s_priority_boost.disabled"/> + <property id="config.bsp.fsp.tz.csar" value="config.bsp.fsp.tz.csar.both"/> + <property id="config.bsp.fsp.tz.rstsar" value="config.bsp.fsp.tz.rstsar.both"/> + <property id="config.bsp.fsp.tz.bbfsar" value="config.bsp.fsp.tz.bbfsar.both"/> + <property id="config.bsp.fsp.tz.sramsar.sramprcr" value="config.bsp.fsp.tz.sramsar.sramprcr.both"/> + <property id="config.bsp.fsp.tz.sramsar.sramecc" value="config.bsp.fsp.tz.sramsar.sramecc.both"/> + <property id="config.bsp.fsp.tz.stbramsar" value="config.bsp.fsp.tz.stbramsar.both"/> + <property id="config.bsp.fsp.tz.bussara" value="config.bsp.fsp.tz.bussara.both"/> + <property id="config.bsp.fsp.tz.bussarb" value="config.bsp.fsp.tz.bussarb.both"/> + <property id="config.bsp.fsp.tz.uninitialized_ns_application_fallback" value="config.bsp.fsp.tz.uninitialized_ns_application_fallback.enabled"/> + <property id="config.bsp.fsp.cache_line_size" value="config.bsp.fsp.cache_line_size.32"/> + <property id="config.bsp.fsp.OFS0.iwdt_start_mode" value="config.bsp.fsp.OFS0.iwdt_start_mode.disabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_timeout" value="config.bsp.fsp.OFS0.iwdt_timeout.2048"/> + <property id="config.bsp.fsp.OFS0.iwdt_divisor" value="config.bsp.fsp.OFS0.iwdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_end" value="config.bsp.fsp.OFS0.iwdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_start" value="config.bsp.fsp.OFS0.iwdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.iwdt_reset_interrupt" value="config.bsp.fsp.OFS0.iwdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.iwdt_stop_control" value="config.bsp.fsp.OFS0.iwdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS0.wdt_start_mode" value="config.bsp.fsp.OFS0.wdt_start_mode.register"/> + <property id="config.bsp.fsp.OFS0.wdt_timeout" value="config.bsp.fsp.OFS0.wdt_timeout.16384"/> + <property id="config.bsp.fsp.OFS0.wdt_divisor" value="config.bsp.fsp.OFS0.wdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.wdt_window_end" value="config.bsp.fsp.OFS0.wdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.wdt_window_start" value="config.bsp.fsp.OFS0.wdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.wdt_reset_interrupt" value="config.bsp.fsp.OFS0.wdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.wdt_stop_control" value="config.bsp.fsp.OFS0.wdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS1_SEL.voltage_detection0_level" value="config.bsp.fsp.OFS1_SEL.voltage_detection0_level.secure"/> + <property id="config.bsp.fsp.OFS1_SEL.voltage_detection0.start" value="config.bsp.fsp.OFS1_SEL.voltage_detection0.start.secure"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0.start" value="config.bsp.fsp.OFS1.voltage_detection0.start.disabled"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0_level" value="config.bsp.fsp.OFS1.voltage_detection0_level.280"/> + <property id="config.bsp.fsp.OFS1.hoco_osc" value="config.bsp.fsp.OFS1.hoco_osc.disabled"/> + <property id="config.bsp.fsp.BPS.BPS0" value=""/> + <property id="config.bsp.fsp.BPS.BPS1" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS0" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS1" value=""/> + <property id="config.bsp.fsp.hoco_fll" value="config.bsp.fsp.hoco_fll.disabled"/> + <property id="config.bsp.common.main_osc_wait" value="config.bsp.common.main_osc_wait.wait_8163"/> + <property id="config.bsp.fsp.mcu.adc.max_freq_hz" value="50000000"/> + <property id="config.bsp.fsp.mcu.sci_uart.max_baud" value="16666666"/> + <property id="config.bsp.fsp.mcu.adc.sensors_are_exclusive" value="0"/> + <property id="config.bsp.fsp.mcu.sci_spi.max_bitrate" value="25000000"/> + <property id="config.bsp.fsp.mcu.spi.max_bitrate" value="50000000"/> + <property id="config.bsp.fsp.mcu.iic_master.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_master.fastplus_channels" value="0x1"/> + <property id="config.bsp.fsp.mcu.iic_slave.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_slave.fastplus_channels" value="0x1"/> + <property id="config.bsp.fsp.mcu.sci_uart.cstpen_channels" value="0x0219"/> + <property id="config.bsp.fsp.mcu.gpt.pin_count_source_channels" value="0xFFFF"/> + <property id="config.bsp.fsp.mcu.adc_dmac.samples_per_channel" value="32767"/> + </config> + <config id="config.bsp.ra"> + <property id="config.bsp.common.main" value="0x800"/> + <property id="config.bsp.common.heap" value="0x800"/> + <property id="config.bsp.common.vcc" value="3300"/> + <property id="config.bsp.common.checking" value="config.bsp.common.checking.disabled"/> + <property id="config.bsp.common.assert" value="config.bsp.common.assert.none"/> + <property id="config.bsp.common.error_log" value="config.bsp.common.error_log.none"/> + <property id="config.bsp.common.soft_reset" value="config.bsp.common.soft_reset.disabled"/> + <property id="config.bsp.common.main_osc_populated" value="config.bsp.common.main_osc_populated.enabled"/> + <property id="config.bsp.common.pfs_protect" value="config.bsp.common.pfs_protect.enabled"/> + <property id="config.bsp.common.c_runtime_init" value="config.bsp.common.c_runtime_init.enabled"/> + <property id="config.bsp.common.early_init" value="config.bsp.common.early_init.disabled"/> + <property id="config.bsp.common.main_osc_clock_source" value="config.bsp.common.main_osc_clock_source.crystal"/> + <property id="config.bsp.common.subclock_populated" value="config.bsp.common.subclock_populated.enabled"/> + <property id="config.bsp.common.subclock_drive" value="config.bsp.common.subclock_drive.standard"/> + <property id="config.bsp.common.subclock_stabilization_ms" value="1000"/> + </config> + </raBspConfiguration> + <raClockConfiguration> + <node id="board.clock.xtal.freq" mul="24000000" option="_edit"/> + <node id="board.clock.hoco.freq" option="board.clock.hoco.freq.20m"/> + <node id="board.clock.loco.freq" option="board.clock.loco.freq.32768"/> + <node id="board.clock.moco.freq" option="board.clock.moco.freq.8m"/> + <node id="board.clock.subclk.freq" option="board.clock.subclk.freq.32768"/> + <node id="board.clock.pll.source" option="board.clock.pll.source.xtal"/> + <node id="board.clock.pll.div" option="board.clock.pll.div.3"/> + <node id="board.clock.pll.mul" option="board.clock.pll.mul.250"/> + <node id="board.clock.pll.display" option="board.clock.pll.display.value"/> + <node id="board.clock.pll2.source" option="board.clock.pll2.source.xtal"/> + <node id="board.clock.pll2.div" option="board.clock.pll2.div.2"/> + <node id="board.clock.pll2.mul" option="board.clock.pll2.mul.200"/> + <node id="board.clock.pll2.display" option="board.clock.pll2.display.value"/> + <node id="board.clock.clock.source" option="board.clock.clock.source.pll"/> + <node id="board.clock.clkout.source" option="board.clock.clkout.source.disabled"/> + <node id="board.clock.uclk.source" option="board.clock.uclk.source.pll2"/> + <node id="board.clock.iclk.div" option="board.clock.iclk.div.2"/> + <node id="board.clock.pclka.div" option="board.clock.pclka.div.2"/> + <node id="board.clock.pclkb.div" option="board.clock.pclkb.div.4"/> + <node id="board.clock.pclkc.div" option="board.clock.pclkc.div.4"/> + <node id="board.clock.pclkd.div" option="board.clock.pclkd.div.2"/> + <node id="board.clock.fclk.div" option="board.clock.fclk.div.4"/> + <node id="board.clock.clkout.div" option="board.clock.clkout.div.1"/> + <node id="board.clock.uclk.div" option="board.clock.uclk.div.5"/> + <node id="board.clock.iclk.display" option="board.clock.iclk.display.value"/> + <node id="board.clock.pclka.display" option="board.clock.pclka.display.value"/> + <node id="board.clock.pclkb.display" option="board.clock.pclkb.display.value"/> + <node id="board.clock.pclkc.display" option="board.clock.pclkc.display.value"/> + <node id="board.clock.pclkd.display" option="board.clock.pclkd.display.value"/> + <node id="board.clock.fclk.display" option="board.clock.fclk.display.value"/> + <node id="board.clock.clkout.display" option="board.clock.clkout.display.value"/> + <node id="board.clock.uclk.display" option="board.clock.uclk.display.value"/> + </raClockConfiguration> + <raComponentSelection> + <component apiversion="" class="Projects" condition="" group="all" subgroup="baremetal_blinky" variant="" vendor="Renesas" version="5.6.0"> + <description>Simple application that blinks an LED. No RTOS included.</description> + <originalPack>Renesas.RA_baremetal_blinky.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="Common" condition="" group="all" subgroup="fsp_common" variant="" vendor="Renesas" version="5.6.0"> + <description>Board Support Package Common Files</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_ioport" variant="" vendor="Renesas" version="5.6.0"> + <description>I/O Port</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="CMSIS" condition="" group="CMSIS5" subgroup="CoreM" variant="" vendor="Arm" version="6.1.0+fsp.5.6.0"> + <description>Arm CMSIS Version 6 - Core (M)</description> + <originalPack>Arm.CMSIS6.6.1.0+fsp.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m3" subgroup="device" variant="R7FA4M3AF3CFB" vendor="Renesas" version="5.6.0"> + <description>Board support package for R7FA4M3AF3CFB</description> + <originalPack>Renesas.RA_mcu_ra4m3.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m3" subgroup="device" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA4M3</description> + <originalPack>Renesas.RA_mcu_ra4m3.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m3" subgroup="fsp" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA4M3 - FSP Data</description> + <originalPack>Renesas.RA_mcu_ra4m3.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m3" subgroup="events" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA4M3 - Events</description> + <originalPack>Renesas.RA_mcu_ra4m3.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="Board" subgroup="ra4m3_ek" variant="" vendor="Renesas" version="5.6.0"> + <description>RA4M3-EK Board Support Files</description> + <originalPack>Renesas.RA_board_ra4m3_ek.5.6.0.pack</originalPack> + </component> + </raComponentSelection> + <raElcConfiguration/> + <raIcuConfiguration/> + <raModuleConfiguration> + <module id="module.driver.ioport_on_ioport.0"> + <property id="module.driver.ioport.name" value="g_ioport"/> + <property id="module.driver.ioport.elc_trigger_ioport1" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport2" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport3" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport4" value="_disabled"/> + <property id="module.driver.ioport.pincfg" value="g_bsp_pin_cfg"/> + </module> + <context id="_hal.0"> + <stack module="module.driver.ioport_on_ioport.0"/> + </context> + <config id="config.driver.ioport"> + <property id="config.driver.ioport.checking" value="config.driver.ioport.checking.system"/> + </config> + </raModuleConfiguration> + <raPinConfiguration> + <symbolicName propertyId="p000.symbolic_name" value="ARDUINO_A0_MIKROBUS_AN"/> + <symbolicName propertyId="p001.symbolic_name" value="ARDUINO_A1"/> + <symbolicName propertyId="p003.symbolic_name" value="ARDUINO_A2"/> + <symbolicName propertyId="p005.symbolic_name" value="SW1"/> + <symbolicName propertyId="p006.symbolic_name" value="SW2"/> + <symbolicName propertyId="p007.symbolic_name" value="ARDUINO_A3"/> + <symbolicName propertyId="p008.symbolic_name" value="PMOD1_INT"/> + <symbolicName propertyId="p014.symbolic_name" value="ARDUINO_A4"/> + <symbolicName propertyId="p015.symbolic_name" value="ARDUINO_A5"/> + <symbolicName propertyId="p100.symbolic_name" value="ARDUINO_RX_MIKROBUS_RX"/> + <symbolicName propertyId="p101.symbolic_name" value="ARDUINO_TX_MIKROBUS_TX"/> + <symbolicName propertyId="p105.symbolic_name" value="ARDUINO_D2"/> + <symbolicName propertyId="p111.symbolic_name" value="ARDUINO_D3"/> + <symbolicName propertyId="p115.symbolic_name" value="MIKROBUS_RST"/> + <symbolicName propertyId="p202.symbolic_name" value="ARDUINO_MISO_MIKROBUS_MISO_PMOD1_MISO"/> + <symbolicName propertyId="p203.symbolic_name" value="ARDUINO_MOSI_MIKROBUS_MOSI_PMOD1_MOSI"/> + <symbolicName propertyId="p204.symbolic_name" value="ARDUINO_CLK_MIKROBUS_CLK_PMOD1_CLK"/> + <symbolicName propertyId="p205.symbolic_name" value="ARDUINO_SS_MIKCRBUS_SS"/> + <symbolicName propertyId="p206.symbolic_name" value="PMOD1_SS1"/> + <symbolicName propertyId="p207.symbolic_name" value="PMOD1_SS2"/> + <symbolicName propertyId="p302.symbolic_name" value="PMOD1_SS3"/> + <symbolicName propertyId="p303.symbolic_name" value="ARDUINO_D9"/> + <symbolicName propertyId="p304.symbolic_name" value="ARDUINO_D7"/> + <symbolicName propertyId="p305.symbolic_name" value="QSPI_CLK"/> + <symbolicName propertyId="p306.symbolic_name" value="QSPI_SSL"/> + <symbolicName propertyId="p307.symbolic_name" value="QSPI_IO0"/> + <symbolicName propertyId="p308.symbolic_name" value="QSPI_IO1"/> + <symbolicName propertyId="p309.symbolic_name" value="QSPI_IO2"/> + <symbolicName propertyId="p310.symbolic_name" value="QSPI_IO3"/> + <symbolicName propertyId="p311.symbolic_name" value="PMOD1_RST"/> + <symbolicName propertyId="p400.symbolic_name" value="LED3"/> + <symbolicName propertyId="p404.symbolic_name" value="LED2"/> + <symbolicName propertyId="p407.symbolic_name" value="USB_VBUS"/> + <symbolicName propertyId="p408.symbolic_name" value="ARDUINO_D6_MIKROBUS_PWM"/> + <symbolicName propertyId="p409.symbolic_name" value="MIKROBUS_INT"/> + <symbolicName propertyId="p414.symbolic_name" value="PMOD2_INT"/> + <symbolicName propertyId="p415.symbolic_name" value="LED1"/> + <symbolicName propertyId="p500.symbolic_name" value="USB_VBUS_EN"/> + <symbolicName propertyId="p501.symbolic_name" value="USB_VBUS_OC"/> + <symbolicName propertyId="p505.symbolic_name" value="GROVE2_AN1"/> + <symbolicName propertyId="p506.symbolic_name" value="GROVE2_AN2"/> + <symbolicName propertyId="p511.symbolic_name" value="GROVE1_SDA_QWIIC_SDA"/> + <symbolicName propertyId="p512.symbolic_name" value="GROVE1_SCL_QWIIC_SCL"/> + <symbolicName propertyId="p601.symbolic_name" value="ARDUINO_SCL_MIKROBUS_SCL"/> + <symbolicName propertyId="p602.symbolic_name" value="ARDUINO_SDA_MIKROBUS_SDA"/> + <symbolicName propertyId="p611.symbolic_name" value="ARDUINO_D8"/> + <symbolicName propertyId="p612.symbolic_name" value="ARDUINO_RST"/> + <symbolicName propertyId="p708.symbolic_name" value="PMOD2_RST"/> + <symbolicName propertyId="p709.symbolic_name" value="PMOD2_SS2"/> + <symbolicName propertyId="p710.symbolic_name" value="PMOD2_SS3"/> + <symbolicName propertyId="p712.symbolic_name" value="ARDUINO_D5"/> + <symbolicName propertyId="p713.symbolic_name" value="ARDUINO_D4"/> + <pincfg active="true" name="RA4M3 EK" selected="true" symbol="g_bsp_pin_cfg"> + <configSetting altId="adc0.an00.p000" configurationId="adc0.an00"/> + <configSetting altId="adc0.an01.p001" configurationId="adc0.an01"/> + <configSetting altId="adc0.an03.p003" configurationId="adc0.an03"/> + <configSetting altId="adc0.an07.p007" configurationId="adc0.an07"/> + <configSetting altId="adc0.an12.p014" configurationId="adc0.an12"/> + <configSetting altId="adc0.an13.p015" configurationId="adc0.an13"/> + <configSetting altId="adc0.mode.custom" configurationId="adc0.mode"/> + <configSetting altId="adc1.an21.p505" configurationId="adc1.an21"/> + <configSetting altId="adc1.an22.p506" configurationId="adc1.an22"/> + <configSetting altId="adc1.mode.custom" configurationId="adc1.mode"/> + <configSetting altId="cgc0.extal.p212" configurationId="cgc0.extal"/> + <configSetting altId="cgc0.mode.mainsub" configurationId="cgc0.mode"/> + <configSetting altId="cgc0.xtal.p213" configurationId="cgc0.xtal"/> + <configSetting altId="debug0.mode.swd" configurationId="debug0.mode"/> + <configSetting altId="debug0.swclk.p300" configurationId="debug0.swclk"/> + <configSetting altId="debug0.swdio.p108" configurationId="debug0.swdio"/> + <configSetting altId="gpt6.gtiocb.p408" configurationId="gpt6.gtiocb"/> + <configSetting altId="gpt6.mode.gtiocaorgtiocb.free" configurationId="gpt6.mode"/> + <configSetting altId="iic1.mode.enabled.a" configurationId="iic1.mode"/> + <configSetting altId="iic1.scl.p512" configurationId="iic1.scl"/> + <configSetting altId="iic1.sda.p511" configurationId="iic1.sda"/> + <configSetting altId="p000.asel" configurationId="p000"/> + <configSetting altId="p000.gpio_mode.gpio_mode_an" configurationId="p000.gpio_mode"/> + <configSetting altId="p001.asel" configurationId="p001"/> + <configSetting altId="p001.gpio_mode.gpio_mode_an" configurationId="p001.gpio_mode"/> + <configSetting altId="p003.asel" configurationId="p003"/> + <configSetting altId="p003.gpio_mode.gpio_mode_an" configurationId="p003.gpio_mode"/> + <configSetting altId="p005.input" configurationId="p005"/> + <configSetting altId="p005.gpio_mode.gpio_mode_in" configurationId="p005.gpio_mode"/> + <configSetting altId="p006.input" configurationId="p006"/> + <configSetting altId="p006.gpio_irq.gpio_irq_enabled" configurationId="p006.gpio_irq"/> + <configSetting altId="p006.gpio_mode.gpio_mode_in" configurationId="p006.gpio_mode"/> + <configSetting altId="p007.asel" configurationId="p007"/> + <configSetting altId="p007.gpio_mode.gpio_mode_an" configurationId="p007.gpio_mode"/> + <configSetting altId="p008.input" configurationId="p008"/> + <configSetting altId="p008.gpio_irq.gpio_irq_enabled" configurationId="p008.gpio_irq"/> + <configSetting altId="p008.gpio_mode.gpio_mode_in" configurationId="p008.gpio_mode"/> + <configSetting altId="p008.gpio_pupd.gpio_pupd_ip_up" configurationId="p008.gpio_pupd"/> + <configSetting altId="p014.asel" configurationId="p014"/> + <configSetting altId="p014.gpio_mode.gpio_mode_an" configurationId="p014.gpio_mode"/> + <configSetting altId="p015.asel" configurationId="p015"/> + <configSetting altId="p015.gpio_mode.gpio_mode_an" configurationId="p015.gpio_mode"/> + <configSetting altId="p100.sci0.rxd" configurationId="p100"/> + <configSetting altId="p100.gpio_mode.gpio_mode_peripheral" configurationId="p100.gpio_mode"/> + <configSetting altId="p101.sci0.txd" configurationId="p101"/> + <configSetting altId="p101.gpio_mode.gpio_mode_peripheral" configurationId="p101.gpio_mode"/> + <configSetting altId="p105.output.low" configurationId="p105"/> + <configSetting altId="p105.gpio_mode.gpio_mode_out.low" configurationId="p105.gpio_mode"/> + <configSetting altId="p108.debug0.swdio" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p111.output.low" configurationId="p111"/> + <configSetting altId="p111.gpio_mode.gpio_mode_out.low" configurationId="p111.gpio_mode"/> + <configSetting altId="p115.output.low" configurationId="p115"/> + <configSetting altId="p115.gpio_mode.gpio_mode_out.low" configurationId="p115.gpio_mode"/> + <configSetting altId="p202.spi0.miso" configurationId="p202"/> + <configSetting altId="p202.gpio_mode.gpio_mode_peripheral" configurationId="p202.gpio_mode"/> + <configSetting altId="p203.spi0.mosi" configurationId="p203"/> + <configSetting altId="p203.gpio_mode.gpio_mode_peripheral" configurationId="p203.gpio_mode"/> + <configSetting altId="p204.spi0.rspck" configurationId="p204"/> + <configSetting altId="p204.gpio_mode.gpio_mode_peripheral" configurationId="p204.gpio_mode"/> + <configSetting altId="p205.spi0.ssl0" configurationId="p205"/> + <configSetting altId="p205.gpio_mode.gpio_mode_peripheral" configurationId="p205.gpio_mode"/> + <configSetting altId="p206.spi0.ssl1" configurationId="p206"/> + <configSetting altId="p206.gpio_mode.gpio_mode_peripheral" configurationId="p206.gpio_mode"/> + <configSetting altId="p207.spi0.ssl2" configurationId="p207"/> + <configSetting altId="p207.gpio_mode.gpio_mode_peripheral" configurationId="p207.gpio_mode"/> + <configSetting altId="p212.cgc0.extal" configurationId="p212"/> + <configSetting altId="p212.gpio_mode.gpio_mode_peripheral" configurationId="p212.gpio_mode"/> + <configSetting altId="p213.cgc0.xtal" configurationId="p213"/> + <configSetting altId="p213.gpio_mode.gpio_mode_peripheral" configurationId="p213.gpio_mode"/> + <configSetting altId="p300.debug0.swclk" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + <configSetting altId="p302.spi0.ssl3" configurationId="p302"/> + <configSetting altId="p302.gpio_mode.gpio_mode_peripheral" configurationId="p302.gpio_mode"/> + <configSetting altId="p303.output.low" configurationId="p303"/> + <configSetting altId="p303.gpio_mode.gpio_mode_out.low" configurationId="p303.gpio_mode"/> + <configSetting altId="p304.output.low" configurationId="p304"/> + <configSetting altId="p304.gpio_mode.gpio_mode_out.low" configurationId="p304.gpio_mode"/> + <configSetting altId="p305.qspi0.qspclk" configurationId="p305"/> + <configSetting altId="p305.gpio_mode.gpio_mode_peripheral" configurationId="p305.gpio_mode"/> + <configSetting altId="p306.qspi0.qssl" configurationId="p306"/> + <configSetting altId="p306.gpio_mode.gpio_mode_peripheral" configurationId="p306.gpio_mode"/> + <configSetting altId="p307.qspi0.qio0" configurationId="p307"/> + <configSetting altId="p307.gpio_mode.gpio_mode_peripheral" configurationId="p307.gpio_mode"/> + <configSetting altId="p308.qspi0.qio1" configurationId="p308"/> + <configSetting altId="p308.gpio_mode.gpio_mode_peripheral" configurationId="p308.gpio_mode"/> + <configSetting altId="p309.qspi0.qio2" configurationId="p309"/> + <configSetting altId="p309.gpio_mode.gpio_mode_peripheral" configurationId="p309.gpio_mode"/> + <configSetting altId="p310.qspi0.qio3" configurationId="p310"/> + <configSetting altId="p310.gpio_mode.gpio_mode_peripheral" configurationId="p310.gpio_mode"/> + <configSetting altId="p311.output.low" configurationId="p311"/> + <configSetting altId="p311.gpio_mode.gpio_mode_out.low" configurationId="p311.gpio_mode"/> + <configSetting altId="p400.output.low" configurationId="p400"/> + <configSetting altId="p400.gpio_mode.gpio_mode_out.low" configurationId="p400.gpio_mode"/> + <configSetting altId="p404.output.low" configurationId="p404"/> + <configSetting altId="p404.gpio_mode.gpio_mode_out.low" configurationId="p404.gpio_mode"/> + <configSetting altId="p407.usbfs0.vbus" configurationId="p407"/> + <configSetting altId="p407.gpio_mode.gpio_mode_peripheral" configurationId="p407.gpio_mode"/> + <configSetting altId="p408.gpt6.gtiocb" configurationId="p408"/> + <configSetting altId="p408.gpio_mode.gpio_mode_peripheral" configurationId="p408.gpio_mode"/> + <configSetting altId="p409.input" configurationId="p409"/> + <configSetting altId="p409.gpio_irq.gpio_irq_enabled" configurationId="p409.gpio_irq"/> + <configSetting altId="p409.gpio_mode.gpio_mode_in" configurationId="p409.gpio_mode"/> + <configSetting altId="p409.gpio_pupd.gpio_pupd_ip_up" configurationId="p409.gpio_pupd"/> + <configSetting altId="p414.input" configurationId="p414"/> + <configSetting altId="p414.gpio_irq.gpio_irq_enabled" configurationId="p414.gpio_irq"/> + <configSetting altId="p414.gpio_mode.gpio_mode_in" configurationId="p414.gpio_mode"/> + <configSetting altId="p414.gpio_pupd.gpio_pupd_ip_up" configurationId="p414.gpio_pupd"/> + <configSetting altId="p415.output.low" configurationId="p415"/> + <configSetting altId="p415.gpio_mode.gpio_mode_out.low" configurationId="p415.gpio_mode"/> + <configSetting altId="p500.usbfs0.vbusen" configurationId="p500"/> + <configSetting altId="p500.gpio_mode.gpio_mode_peripheral" configurationId="p500.gpio_mode"/> + <configSetting altId="p501.usbfs0.ovrcura" configurationId="p501"/> + <configSetting altId="p501.gpio_mode.gpio_mode_peripheral" configurationId="p501.gpio_mode"/> + <configSetting altId="p505.asel" configurationId="p505"/> + <configSetting altId="p505.gpio_mode.gpio_mode_an" configurationId="p505.gpio_mode"/> + <configSetting altId="p506.asel" configurationId="p506"/> + <configSetting altId="p506.gpio_mode.gpio_mode_an" configurationId="p506.gpio_mode"/> + <configSetting altId="p511.iic1.sda" configurationId="p511"/> + <configSetting altId="p511.gpio_mode.gpio_mode_peripheral" configurationId="p511.gpio_mode"/> + <configSetting altId="p512.iic1.scl" configurationId="p512"/> + <configSetting altId="p512.gpio_mode.gpio_mode_peripheral" configurationId="p512.gpio_mode"/> + <configSetting altId="p601.sci9.scl" configurationId="p601"/> + <configSetting altId="p601.gpio_mode.gpio_mode_peripheral" configurationId="p601.gpio_mode"/> + <configSetting altId="p601.gpio_otype.gpio_otype_n_ch_od" configurationId="p601.gpio_otype"/> + <configSetting altId="p602.sci9.sda" configurationId="p602"/> + <configSetting altId="p602.gpio_mode.gpio_mode_peripheral" configurationId="p602.gpio_mode"/> + <configSetting altId="p602.gpio_otype.gpio_otype_n_ch_od" configurationId="p602.gpio_otype"/> + <configSetting altId="p611.output.low" configurationId="p611"/> + <configSetting altId="p611.gpio_mode.gpio_mode_out.low" configurationId="p611.gpio_mode"/> + <configSetting altId="p612.output.low" configurationId="p612"/> + <configSetting altId="p612.gpio_mode.gpio_mode_out.low" configurationId="p612.gpio_mode"/> + <configSetting altId="p708.output.low" configurationId="p708"/> + <configSetting altId="p708.gpio_mode.gpio_mode_out.low" configurationId="p708.gpio_mode"/> + <configSetting altId="p709.output.low" configurationId="p709"/> + <configSetting altId="p709.gpio_mode.gpio_mode_out.low" configurationId="p709.gpio_mode"/> + <configSetting altId="p710.output.low" configurationId="p710"/> + <configSetting altId="p710.gpio_mode.gpio_mode_out.low" configurationId="p710.gpio_mode"/> + <configSetting altId="p712.output.low" configurationId="p712"/> + <configSetting altId="p712.gpio_mode.gpio_mode_out.low" configurationId="p712.gpio_mode"/> + <configSetting altId="p713.output.low" configurationId="p713"/> + <configSetting altId="p713.gpio_mode.gpio_mode_out.low" configurationId="p713.gpio_mode"/> + <configSetting altId="qspi0.mode.quad.b" configurationId="qspi0.mode"/> + <configSetting altId="qspi0.pairing.b" configurationId="qspi0.pairing"/> + <configSetting altId="qspi0.qio0.p307" configurationId="qspi0.qio0"/> + <configSetting altId="qspi0.qio1.p308" configurationId="qspi0.qio1"/> + <configSetting altId="qspi0.qio2.p309" configurationId="qspi0.qio2"/> + <configSetting altId="qspi0.qio3.p310" configurationId="qspi0.qio3"/> + <configSetting altId="qspi0.qspclk.p305" configurationId="qspi0.qspclk"/> + <configSetting altId="qspi0.qssl.p306" configurationId="qspi0.qssl"/> + <configSetting altId="sci0.mode.asynchronous.free" configurationId="sci0.mode"/> + <configSetting altId="sci0.rxd.p100" configurationId="sci0.rxd"/> + <configSetting altId="sci0.txd.p101" configurationId="sci0.txd"/> + <configSetting altId="sci9.mode.iic.free" configurationId="sci9.mode"/> + <configSetting altId="sci9.scl.p601" configurationId="sci9.scl"/> + <configSetting altId="sci9.sda.p602" configurationId="sci9.sda"/> + <configSetting altId="spi0.miso.p202" configurationId="spi0.miso"/> + <configSetting altId="spi0.mode.enabled.free" configurationId="spi0.mode"/> + <configSetting altId="spi0.mosi.p203" configurationId="spi0.mosi"/> + <configSetting altId="spi0.pairing.free" configurationId="spi0.pairing"/> + <configSetting altId="spi0.rspck.p204" configurationId="spi0.rspck"/> + <configSetting altId="spi0.ssl0.p205" configurationId="spi0.ssl0"/> + <configSetting altId="spi0.ssl1.p206" configurationId="spi0.ssl1"/> + <configSetting altId="spi0.ssl2.p207" configurationId="spi0.ssl2"/> + <configSetting altId="spi0.ssl3.p302" configurationId="spi0.ssl3"/> + <configSetting altId="usbfs0.mode.custom" configurationId="usbfs0.mode"/> + <configSetting altId="usbfs0.ovrcura.p501" configurationId="usbfs0.ovrcura"/> + <configSetting altId="usbfs0.vbus.p407" configurationId="usbfs0.vbus"/> + <configSetting altId="usbfs0.vbusen.p500" configurationId="usbfs0.vbusen"/> + </pincfg> + <pincfg active="false" name="R7FA4M3AF3CFB.pincfg" selected="false" symbol=""> + <configSetting altId="debug0.mode.jtag" configurationId="debug0.mode"/> + <configSetting altId="debug0.tck.p300" configurationId="debug0.tck"/> + <configSetting altId="debug0.tdi.p110" configurationId="debug0.tdi"/> + <configSetting altId="debug0.tdo.p109" configurationId="debug0.tdo"/> + <configSetting altId="debug0.tms.p108" configurationId="debug0.tms"/> + <configSetting altId="p108.debug0.tms" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p109.debug0.tdo" configurationId="p109"/> + <configSetting altId="p109.gpio_mode.gpio_mode_peripheral" configurationId="p109.gpio_mode"/> + <configSetting altId="p110.debug0.tdi" configurationId="p110"/> + <configSetting altId="p110.gpio_mode.gpio_mode_peripheral" configurationId="p110.gpio_mode"/> + <configSetting altId="p300.debug0.tck" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + </pincfg> + </raPinConfiguration> +</raConfiguration> diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.h b/hw/bsp/ra/boards/ra6m1_ek/board.h index f73a08fc0..ba663d040 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/board.h +++ b/hw/bsp/ra/boards/ra6m1_ek/board.h @@ -31,19 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_01_PIN_12 -#define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_04_PIN_15 +#define LED_STATE_ON 1 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT }, - { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT }, - // USB FS - { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS }, -}; - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 772e5e5b1..000000000 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,68 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (2) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) -#else - #define BSP_CFG_RTOS (0) -#endif -#endif - -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif - -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) -#endif - -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x1000) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 40bb3a3bf..000000000 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA6M1AD3CFP -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (524288) -#define BSP_RAM_SIZE_BYTES (262144) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (100) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index 5fedd754f..000000000 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,84 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m1/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA6M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif - -#define BSP_CFG_FLL_ENABLE (0) - -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0xFFFFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0xFFFFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0xFFFFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0xFFFFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) - #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) -#else - /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ - #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) - #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) - #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) - #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..90afbdef3 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x1000) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h index bd6a901c3..bd6a901c3 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..5e7841442 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA6M1AD3CFP + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (524288) + #define BSP_RAM_SIZE_BYTES (262144) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (100) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..16349b5ff --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,84 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra6m1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA6M1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + + #define BSP_CFG_FLL_ENABLE (0) + + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) + + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + #define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC0_START (0xFFFFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC0_END (0xFFFFFFFF) + #define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC1_START (0xFFFFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC1_END (0xFFFFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) + #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #endif + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + + /* + ID Code + Note: To lock and disable the debug interface define BSP_ID_CODE_LOCKED in compiler settings. + WARNING: This will disable debug access to the part. However, ALeRASE command will be accepted, which will clear (reset) the ID code. After clearing ID code, debug access will be enabled. + */ + #if defined(BSP_ID_CODE_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..8ba9aafba --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define LED1 (BSP_IO_PORT_01_PIN_12) +#define SW1 (BSP_IO_PORT_04_PIN_15) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA6M1-EK.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/bsp_clock_cfg.h index 945a6010b..945a6010b 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/bsp_clock_cfg.h diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include <stdint.h> +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..80774b0a5 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/pin_data.c @@ -0,0 +1,115 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_01_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_02_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld new file mode 100644 index 000000000..605eef7d2 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld @@ -0,0 +1,769 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld new file mode 100644 index 000000000..9d973c737 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x1FFE0000; + RAM_LENGTH = 0x40000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x80000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x0100A150; + ID_CODE_LENGTH = 0x10; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..4c5d77ed0 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml @@ -0,0 +1,270 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<raConfiguration version="9"> + <generalSettings> + <option key="#Board#" value="board.ra6m1ek"/> + <option key="CPU" value="RA6M1"/> + <option key="Core" value="CM4"/> + <option key="#TargetName#" value="R7FA6M1AD3CFP"/> + <option key="#TargetARCHITECTURE#" value="cortex-m4"/> + <option key="#DeviceCommand#" value="R7FA6M1AD"/> + <option key="#RTOS#" value="_none"/> + <option key="#pinconfiguration#" value="R7FA6M1AD3CFP.pincfg"/> + <option key="#FSPVersion#" value="5.6.0"/> + <option key="#ConfigurationFragments#" value="Renesas##BSP##Board##ra6m1_ek##"/> + <option key="#SELECTED_TOOLCHAIN#" value="com.renesas.cdt.managedbuild.gnuarm.toolchain."/> + </generalSettings> + <raBspConfiguration> + <config id="config.bsp.ra6m1.R7FA6M1AD3CFP"> + <property id="config.bsp.part_number" value="config.bsp.part_number.value"/> + <property id="config.bsp.rom_size_bytes" value="config.bsp.rom_size_bytes.value"/> + <property id="config.bsp.rom_size_bytes_hidden" value="524288"/> + <property id="config.bsp.ram_size_bytes" value="config.bsp.ram_size_bytes.value"/> + <property id="config.bsp.data_flash_size_bytes" value="config.bsp.data_flash_size_bytes.value"/> + <property id="config.bsp.package_style" value="config.bsp.package_style.value"/> + <property id="config.bsp.package_pins" value="config.bsp.package_pins.value"/> + <property id="config.bsp.irq_count_hidden" value="96"/> + </config> + <config id="config.bsp.ra6m1"> + <property id="config.bsp.series" value="config.bsp.series.value"/> + </config> + <config id="config.bsp.ra6m1.fsp"> + <property id="config.bsp.fsp.inline_irq_functions" value="config.bsp.common.inline_irq_functions.enabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_start_mode" value="config.bsp.fsp.OFS0.iwdt_start_mode.disabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_timeout" value="config.bsp.fsp.OFS0.iwdt_timeout.2048"/> + <property id="config.bsp.fsp.OFS0.iwdt_divisor" value="config.bsp.fsp.OFS0.iwdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_end" value="config.bsp.fsp.OFS0.iwdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_start" value="config.bsp.fsp.OFS0.iwdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.iwdt_reset_interrupt" value="config.bsp.fsp.OFS0.iwdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.iwdt_stop_control" value="config.bsp.fsp.OFS0.iwdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS0.wdt_start_mode" value="config.bsp.fsp.OFS0.wdt_start_mode.register"/> + <property id="config.bsp.fsp.OFS0.wdt_timeout" value="config.bsp.fsp.OFS0.wdt_timeout.16384"/> + <property id="config.bsp.fsp.OFS0.wdt_divisor" value="config.bsp.fsp.OFS0.wdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.wdt_window_end" value="config.bsp.fsp.OFS0.wdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.wdt_window_start" value="config.bsp.fsp.OFS0.wdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.wdt_reset_interrupt" value="config.bsp.fsp.OFS0.wdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.wdt_stop_control" value="config.bsp.fsp.OFS0.wdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0.start" value="config.bsp.fsp.OFS1.voltage_detection0.start.disabled"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0_level" value="config.bsp.fsp.OFS1.voltage_detection0_level.280"/> + <property id="config.bsp.fsp.OFS1.hoco_osc" value="config.bsp.fsp.OFS1.hoco_osc.disabled"/> + <property id="config.bsp.fsp.mpu_pc0_enable" value="config.bsp.fsp.mpu_pc0_enable.disabled"/> + <property id="config.bsp.fsp.mpu_pc0_start" value="0xFFFFFFFC"/> + <property id="config.bsp.fsp.mpu_pc0_end" value="0xFFFFFFFF"/> + <property id="config.bsp.fsp.mpu_pc1_enable" value="config.bsp.fsp.mpu_pc1_enable.disabled"/> + <property id="config.bsp.fsp.mpu_pc1_start" value="0xFFFFFFFC"/> + <property id="config.bsp.fsp.mpu_pc1_end" value="0xFFFFFFFF"/> + <property id="config.bsp.fsp.mpu_reg0_enable" value="config.bsp.fsp.mpu_reg0_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg0_start" value="0x00FFFFFC"/> + <property id="config.bsp.fsp.mpu_reg0_end" value="0x00FFFFFF"/> + <property id="config.bsp.fsp.mpu_reg1_enable" value="config.bsp.fsp.mpu_reg1_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg1_start" value="0x200FFFFC"/> + <property id="config.bsp.fsp.mpu_reg1_end" value="0x200FFFFF"/> + <property id="config.bsp.fsp.mpu_reg2_enable" value="config.bsp.fsp.mpu_reg2_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg2_start" value="0x407FFFFC"/> + <property id="config.bsp.fsp.mpu_reg2_end" value="0x407FFFFF"/> + <property id="config.bsp.fsp.mpu_reg3_enable" value="config.bsp.fsp.mpu_reg3_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg3_start" value="0x400DFFFC"/> + <property id="config.bsp.fsp.mpu_reg3_end" value="0x400DFFFF"/> + <property id="config.bsp.fsp.hoco_fll" value="config.bsp.fsp.hoco_fll.disabled"/> + <property id="config.bsp.common.main_osc_wait" value="config.bsp.common.main_osc_wait.wait_8163"/> + <property id="config.bsp.fsp.mcu.adc.max_freq_hz" value="60000000"/> + <property id="config.bsp.fsp.mcu.sci_uart.max_baud" value="20000000"/> + <property id="config.bsp.fsp.mcu.adc.sample_and_hold" value="1"/> + <property id="config.bsp.fsp.mcu.adc.sensors_are_exclusive" value="0"/> + <property id="config.bsp.fsp.mcu.sci_spi.max_bitrate" value="30000000"/> + <property id="config.bsp.fsp.mcu.spi.max_bitrate" value="30000000"/> + <property id="config.bsp.fsp.mcu.iic_master.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_master.fastplus_channels" value="0x1"/> + <property id="config.bsp.fsp.mcu.iic_slave.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_slave.fastplus_channels" value="0x1"/> + <property id="config.bsp.fsp.mcu.sci_uart.cstpen_channels" value="0x0"/> + <property id="config.bsp.fsp.mcu.gpt.pin_count_source_channels" value="0xFFFF"/> + <property id="config.bsp.common.id_mode" value="config.bsp.common.id_mode.unlocked"/> + <property id="config.bsp.common.id_code" value="FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"/> + <property id="config.bsp.common.id1" value=""/> + <property id="config.bsp.common.id2" value=""/> + <property id="config.bsp.common.id3" value=""/> + <property id="config.bsp.common.id4" value=""/> + <property id="config.bsp.common.id_fixed" value=""/> + </config> + <config id="config.bsp.ra"> + <property id="config.bsp.common.main" value="0x1000"/> + <property id="config.bsp.common.heap" value="0x1000"/> + <property id="config.bsp.common.vcc" value="3300"/> + <property id="config.bsp.common.checking" value="config.bsp.common.checking.disabled"/> + <property id="config.bsp.common.assert" value="config.bsp.common.assert.none"/> + <property id="config.bsp.common.error_log" value="config.bsp.common.error_log.none"/> + <property id="config.bsp.common.soft_reset" value="config.bsp.common.soft_reset.disabled"/> + <property id="config.bsp.common.main_osc_populated" value="config.bsp.common.main_osc_populated.enabled"/> + <property id="config.bsp.common.pfs_protect" value="config.bsp.common.pfs_protect.enabled"/> + <property id="config.bsp.common.c_runtime_init" value="config.bsp.common.c_runtime_init.enabled"/> + <property id="config.bsp.common.early_init" value="config.bsp.common.early_init.disabled"/> + <property id="config.bsp.common.main_osc_clock_source" value="config.bsp.common.main_osc_clock_source.crystal"/> + <property id="config.bsp.common.subclock_populated" value="config.bsp.common.subclock_populated.enabled"/> + <property id="config.bsp.common.subclock_drive" value="config.bsp.common.subclock_drive.standard"/> + <property id="config.bsp.common.subclock_stabilization_ms" value="1000"/> + </config> + </raBspConfiguration> + <raClockConfiguration> + <node id="board.clock.xtal.freq" mul="12000000" option="_edit"/> + <node id="board.clock.pll.source" option="board.clock.pll.source.xtal"/> + <node id="board.clock.hoco.freq" option="board.clock.hoco.freq.20m"/> + <node id="board.clock.loco.freq" option="board.clock.loco.freq.32768"/> + <node id="board.clock.moco.freq" option="board.clock.moco.freq.8m"/> + <node id="board.clock.subclk.freq" option="board.clock.subclk.freq.32768"/> + <node id="board.clock.pll.div" option="board.clock.pll.div.1"/> + <node id="board.clock.pll.mul" option="board.clock.pll.mul.200"/> + <node id="board.clock.pll.display" option="board.clock.pll.display.value"/> + <node id="board.clock.clock.source" option="board.clock.clock.source.pll"/> + <node id="board.clock.iclk.div" option="board.clock.iclk.div.2"/> + <node id="board.clock.iclk.display" option="board.clock.iclk.display.value"/> + <node id="board.clock.pclka.div" option="board.clock.pclka.div.2"/> + <node id="board.clock.pclka.display" option="board.clock.pclka.display.value"/> + <node id="board.clock.pclkb.div" option="board.clock.pclkb.div.4"/> + <node id="board.clock.pclkb.display" option="board.clock.pclkb.display.value"/> + <node id="board.clock.pclkc.div" option="board.clock.pclkc.div.4"/> + <node id="board.clock.pclkc.display" option="board.clock.pclkc.display.value"/> + <node id="board.clock.pclkd.div" option="board.clock.pclkd.div.2"/> + <node id="board.clock.pclkd.display" option="board.clock.pclkd.display.value"/> + <node id="board.clock.bclk.div" option="board.clock.bclk.div.2"/> + <node id="board.clock.bclk.display" option="board.clock.bclk.display.value"/> + <node id="board.clock.bclkout.div" option="board.clock.bclkout.div.2"/> + <node id="board.clock.bclkout.display" option="board.clock.bclkout.display.value"/> + <node id="board.clock.uclk.div" option="board.clock.uclk.div.5"/> + <node id="board.clock.uclk.display" option="board.clock.uclk.display.value"/> + <node id="board.clock.fclk.div" option="board.clock.fclk.div.4"/> + <node id="board.clock.fclk.display" option="board.clock.fclk.display.value"/> + <node id="board.clock.clkout.source" option="board.clock.clkout.source.disabled"/> + <node id="board.clock.clkout.div" option="board.clock.clkout.div.1"/> + <node id="board.clock.clkout.display" option="board.clock.clkout.display.value"/> + </raClockConfiguration> + <raComponentSelection> + <component apiversion="" class="Projects" condition="" group="all" subgroup="baremetal_blinky" variant="" vendor="Renesas" version="5.6.0"> + <description>Simple application that blinks an LED. No RTOS included.</description> + <originalPack>Renesas.RA_baremetal_blinky.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="Common" condition="" group="all" subgroup="fsp_common" variant="" vendor="Renesas" version="5.6.0"> + <description>Board Support Package Common Files</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_ioport" variant="" vendor="Renesas" version="5.6.0"> + <description>I/O Port</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="CMSIS" condition="" group="CMSIS5" subgroup="CoreM" variant="" vendor="Arm" version="6.1.0+fsp.5.6.0"> + <description>Arm CMSIS Version 6 - Core (M)</description> + <originalPack>Arm.CMSIS6.6.1.0+fsp.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="Board" subgroup="ra6m1_ek" variant="" vendor="Renesas" version="5.6.0"> + <description>RA6M1-EK Board Support Files</description> + <originalPack>Renesas.RA_board_ra6m1_ek.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m1" subgroup="device" variant="R7FA6M1AD3CFP" vendor="Renesas" version="5.6.0"> + <description>Board support package for R7FA6M1AD3CFP</description> + <originalPack>Renesas.RA_mcu_ra6m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m1" subgroup="device" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA6M1</description> + <originalPack>Renesas.RA_mcu_ra6m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m1" subgroup="fsp" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA6M1 - FSP Data</description> + <originalPack>Renesas.RA_mcu_ra6m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m1" subgroup="events" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA6M1 - Events</description> + <originalPack>Renesas.RA_mcu_ra6m1.5.6.0.pack</originalPack> + </component> + </raComponentSelection> + <raElcConfiguration/> + <raIcuConfiguration/> + <raModuleConfiguration> + <module id="module.driver.ioport_on_ioport.0"> + <property id="module.driver.ioport.name" value="g_ioport"/> + <property id="module.driver.ioport.elc_trigger_ioport1" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport2" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport3" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport4" value="_disabled"/> + <property id="module.driver.ioport.pincfg" value="g_bsp_pin_cfg"/> + </module> + <context id="_hal.0"> + <stack module="module.driver.ioport_on_ioport.0"/> + </context> + <config id="config.driver.ioport"> + <property id="config.driver.ioport.checking" value="config.driver.ioport.checking.system"/> + </config> + </raModuleConfiguration> + <raPinConfiguration> + <symbolicName propertyId="p112.symbolic_name" value="LED1"/> + <symbolicName propertyId="p415.symbolic_name" value="SW1"/> + <pincfg active="true" name="RA6M1-EK.pincfg" selected="true" symbol="g_bsp_pin_cfg"> + <configSetting altId="adc1.an00.p004" configurationId="adc1.an00"/> + <configSetting altId="adc1.mode.custom" configurationId="adc1.mode"/> + <configSetting altId="ctsu0.mode.enabled" configurationId="ctsu0.mode"/> + <configSetting altId="ctsu0.ts02.p207" configurationId="ctsu0.ts02"/> + <configSetting altId="ctsu0.tscap.p205" configurationId="ctsu0.tscap"/> + <configSetting altId="debug0.mode.swd" configurationId="debug0.mode"/> + <configSetting altId="debug0.swclk.p300" configurationId="debug0.swclk"/> + <configSetting altId="debug0.swdio.p108" configurationId="debug0.swdio"/> + <configSetting altId="p004.asel" configurationId="p004"/> + <configSetting altId="p004.gpio_mode.gpio_mode_an" configurationId="p004.gpio_mode"/> + <configSetting altId="p100.spi0.miso" configurationId="p100"/> + <configSetting altId="p100.gpio_mode.gpio_mode_peripheral" configurationId="p100.gpio_mode"/> + <configSetting altId="p101.spi0.mosi" configurationId="p101"/> + <configSetting altId="p101.gpio_mode.gpio_mode_peripheral" configurationId="p101.gpio_mode"/> + <configSetting altId="p102.spi0.rspck" configurationId="p102"/> + <configSetting altId="p102.gpio_mode.gpio_mode_peripheral" configurationId="p102.gpio_mode"/> + <configSetting altId="p103.spi0.ssl0" configurationId="p103"/> + <configSetting altId="p103.gpio_mode.gpio_mode_peripheral" configurationId="p103.gpio_mode"/> + <configSetting altId="p104.sci8.rxd" configurationId="p104"/> + <configSetting altId="p104.gpio_mode.gpio_mode_peripheral" configurationId="p104.gpio_mode"/> + <configSetting altId="p105.sci8.txd" configurationId="p105"/> + <configSetting altId="p105.gpio_mode.gpio_mode_peripheral" configurationId="p105.gpio_mode"/> + <configSetting altId="p106.output.low" configurationId="p106"/> + <configSetting altId="p106.gpio_mode.gpio_mode_out.low" configurationId="p106.gpio_mode"/> + <configSetting altId="p107.output.low" configurationId="p107"/> + <configSetting altId="p107.gpio_mode.gpio_mode_out.low" configurationId="p107.gpio_mode"/> + <configSetting altId="p108.debug0.swdio" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p112.output.low" configurationId="p112"/> + <configSetting altId="p112.gpio_mode.gpio_mode_out.low" configurationId="p112.gpio_mode"/> + <configSetting altId="p201.input" configurationId="p201"/> + <configSetting altId="p201.gpio_mode.gpio_mode_in" configurationId="p201.gpio_mode"/> + <configSetting altId="p205.ctsu0.tscap" configurationId="p205"/> + <configSetting altId="p205.gpio_mode.gpio_mode_peripheral" configurationId="p205.gpio_mode"/> + <configSetting altId="p207.ctsu0.ts02" configurationId="p207"/> + <configSetting altId="p207.gpio_mode.gpio_mode_peripheral" configurationId="p207.gpio_mode"/> + <configSetting altId="p300.debug0.swclk" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + <configSetting altId="p407.usbfs0.vbus" configurationId="p407"/> + <configSetting altId="p407.gpio_mode.gpio_mode_peripheral" configurationId="p407.gpio_mode"/> + <configSetting altId="p415.input" configurationId="p415"/> + <configSetting altId="p415.gpio_mode.gpio_mode_in" configurationId="p415.gpio_mode"/> + <configSetting altId="p415.gpio_pupd.gpio_pupd_ip_up" configurationId="p415.gpio_pupd"/> + <configSetting altId="sci8.mode.asynchronous.free" configurationId="sci8.mode"/> + <configSetting altId="sci8.rxd.p104" configurationId="sci8.rxd"/> + <configSetting altId="sci8.txd.p105" configurationId="sci8.txd"/> + <configSetting altId="spi0.miso.p100" configurationId="spi0.miso"/> + <configSetting altId="spi0.mode.enabled.a" configurationId="spi0.mode"/> + <configSetting altId="spi0.mosi.p101" configurationId="spi0.mosi"/> + <configSetting altId="spi0.rspck.p102" configurationId="spi0.rspck"/> + <configSetting altId="spi0.ssl0.p103" configurationId="spi0.ssl0"/> + <configSetting altId="usbfs0.mode.device" configurationId="usbfs0.mode"/> + <configSetting altId="usbfs0.vbus.p407" configurationId="usbfs0.vbus"/> + </pincfg> + <pincfg active="false" name="R7FA6M1AD3CFP.pincfg" selected="false" symbol=""> + <configSetting altId="debug0.mode.jtag" configurationId="debug0.mode"/> + <configSetting altId="debug0.tck.p300" configurationId="debug0.tck"/> + <configSetting altId="debug0.tdi.p110" configurationId="debug0.tdi"/> + <configSetting altId="debug0.tdo.p109" configurationId="debug0.tdo"/> + <configSetting altId="debug0.tms.p108" configurationId="debug0.tms"/> + <configSetting altId="p108.debug0.tms" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p109.debug0.tdo" configurationId="p109"/> + <configSetting altId="p109.gpio_mode.gpio_mode_peripheral" configurationId="p109.gpio_mode"/> + <configSetting altId="p110.debug0.tdi" configurationId="p110"/> + <configSetting altId="p110.gpio_mode.gpio_mode_peripheral" configurationId="p110.gpio_mode"/> + <configSetting altId="p300.debug0.tck" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + </pincfg> + </raPinConfiguration> +</raConfiguration> diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake index c91d48a32..568d5d78f 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.cmake +++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake @@ -2,21 +2,15 @@ set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) +set(JLINK_OPTION "-USB 000831915224") -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) -set(PORT 1) +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) endif() - -# Host port will be the other port -set(HOST_PORT $<NOT:${PORT}>) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - BOARD_TUD_RHPORT=${PORT} - BOARD_TUH_RHPORT=${HOST_PORT} - # port 0 is fullspeed, port 1 is highspeed - BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> - BOARD_TUH_MAX_SPEED=$<IF:${HOST_PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> - ) endfunction() diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.h b/hw/bsp/ra/boards/ra6m5_ek/board.h index 779f71810..33dda99b4 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.h +++ b/hw/bsp/ra/boards/ra6m5_ek/board.h @@ -31,35 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_00_PIN_08 #define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_00_PIN_05 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW }, - { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT }, - - // USB FS - { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH }, - { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, - { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, - - // USB HS - { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS }, - { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, - { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, - - // ETM Trace - #ifdef TRACE_ETM - { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - #endif -}; #ifdef __cplusplus } diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.mk b/hw/bsp/ra/boards/ra6m5_ek/board.mk index a5c933764..5fcc1d0f1 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.mk +++ b/hw/bsp/ra/boards/ra6m5_ek/board.mk @@ -5,6 +5,7 @@ MCU_VARIANT = ra6m5 JLINK_DEVICE = R7FA6M5BH # Port 1 is highspeed -PORT ?= 1 +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 33d381850..000000000 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,63 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (2) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) -#else - #define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x1000) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 6845183db..000000000 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA6M5BH3CFC -#define BSP_MCU_FEATURE_SET ('B') -#define BSP_ROM_SIZE_BYTES (2097152) -#define BSP_RAM_SIZE_BYTES (524288) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (176) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h deleted file mode 100644 index 0eb5e0516..000000000 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h +++ /dev/null @@ -1,37 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CLOCK_CFG_H_ -#define BSP_CLOCK_CFG_H_ - -#define BSP_CFG_CLOCKS_SECURE (0) -#define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ -#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ -#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ -#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(25U,0U)) /* PLL Mul x25.0 */ -#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ -#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ -#define BSP_CFG_PLL2_MUL (BSP_CLOCKS_PLL_MUL(20U,0U)) /* PLL2 Mul x20.0 */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ -#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ -#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ -#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ -#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ -#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ -#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ -#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ -#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ -#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ -#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ -#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ -#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ -#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ - -#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug index 7b8ee9c95..ca18fed7c 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug +++ b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug @@ -20,9 +20,7 @@ void OnProjectLoad (void) { Project.SetTraceSource ("Trace Pins"); Project.SetTracePortWidth (4); - //File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf"); - //File.Open ("../../../../../../examples/dual/cmake-build-ra6m5/host_hid_to_device_cdc/host_hid_to_device_cdc.elf"); - File.Open ("../../../../../../examples/cmake-build-ra6m5/host/cdc_msc_hid/cdc_msc_hid.elf"); + File.Open ("../../../../../../examples/cmake-build-ra6m5_ek/device/cdc_msc/cdc_msc.elf"); } /********************************************************************* * diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..90afbdef3 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x1000) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h index bd6a901c3..bd6a901c3 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..e532478f8 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA6M5BH3CFC + #define BSP_MCU_FEATURE_SET ('B') + #define BSP_ROM_SIZE_BYTES (2097152) + #define BSP_RAM_SIZE_BYTES (524288) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (176) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index 26e184a94..c01219377 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -5,17 +5,17 @@ extern "C" { #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra4m3/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" -#define BSP_MCU_GROUP_RA4M3 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA6M5 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 #define BSP_HOCO_HZ (18000000) #elif BSP_CFG_HOCO_FREQUENCY == 2 #define BSP_HOCO_HZ (20000000) @@ -23,61 +23,62 @@ extern "C" { #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" #endif -#define BSP_CFG_FLL_ENABLE (0) + #define BSP_CFG_FLL_ENABLE (0) -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#if defined(_RA_TZ_SECURE) + #if defined(_RA_TZ_SECURE) #define BSP_TZ_SECURE_BUILD (1) #define BSP_TZ_NONSECURE_BUILD (0) #elif defined(_RA_TZ_NONSECURE) #define BSP_TZ_SECURE_BUILD (0) #define BSP_TZ_NONSECURE_BUILD (1) #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (0) + #endif -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + /* TrustZone Settings */ + #define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) + #define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) + #define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) + /* CMSIS TrustZone Settings */ + #define SCB_CSR_AIRCR_INIT (1) + #define SCB_AIRCR_BFHFNMINS_VAL (0) + #define SCB_AIRCR_SYSRESETREQS_VAL (1) + #define SCB_AIRCR_PRIS_VAL (0) + #define TZ_FPU_NS_USAGE (1) #ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) + #define SCB_NSACR_CP10_11_VAL (3U) #endif #ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) + #define FPU_FPCCR_TS_VAL (1U) #endif -#define FPU_FPCCR_CLRONRETS_VAL (1) + #define FPU_FPCCR_CLRONRETS_VAL (1) #ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) + #define FPU_FPCCR_CLRONRET_VAL (1) #endif -/* The C-Cache line size that is configured during startup. */ + /* The C-Cache line size that is configured during startup. */ #ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) + #define BSP_CFG_C_CACHE_LINE_SIZE (1U) #endif -/* Type 1 Peripheral Security Attribution */ + /* Type 1 Peripheral Security Attribution */ -/* Peripheral Security Attribution Register (PSAR) Settings */ + /* Peripheral Security Attribution Register (PSAR) Settings */ #ifndef BSP_TZ_CFG_PSARB #define BSP_TZ_CFG_PSARB (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* USBFS */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ @@ -114,7 +115,7 @@ extern "C" { (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ - (((1 > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ 0xffae07f0) /* Unused */ @@ -129,13 +130,13 @@ extern "C" { (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ - (((1 > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ - (((1 > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ - (((1 > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ - (((1 > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ 0x3f3ff8) /* Unused */ #endif #ifndef BSP_TZ_CFG_MSSAR @@ -145,19 +146,19 @@ extern "C" { 0xfffffffc) /* Unused */ #endif -/* Type 2 Peripheral Security Attribution */ + /* Type 2 Peripheral Security Attribution */ -/* Security attribution for Cache registers. */ + /* Security attribution for Cache registers. */ #ifndef BSP_TZ_CFG_CSAR #define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) #endif -/* Security attribution for RSTSRn registers. */ + /* Security attribution for RSTSRn registers. */ #ifndef BSP_TZ_CFG_RSTSAR #define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) #endif -/* Security attribution for registers of LVD channels. */ + /* Security attribution for registers of LVD channels. */ #ifndef BSP_TZ_CFG_LVDSAR #define BSP_TZ_CFG_LVDSAR (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ @@ -165,16 +166,16 @@ extern "C" { 0xFFFFFFFCU) #endif -/* Security attribution for LPM registers. */ + /* Security attribution for LPM registers. */ #ifndef BSP_TZ_CFG_LPMSAR #define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) #endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ + /* Deep Standby Interrupt Factor Security Attribution Register. */ #ifndef BSP_TZ_CFG_DPFSAR #define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) #endif -/* Security attribution for CGC registers. */ + /* Security attribution for CGC registers. */ #ifndef BSP_TZ_CFG_CGFSAR #if BSP_CFG_CLOCKS_SECURE /* Protect all CGC registers from Non-secure write access. */ @@ -185,12 +186,12 @@ extern "C" { #endif #endif -/* Security attribution for Battery Backup registers. */ + /* Security attribution for Battery Backup registers. */ #ifndef BSP_TZ_CFG_BBFSAR #define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) #endif -/* Security attribution for registers for IRQ channels. */ + /* Security attribution for registers for IRQ channels. */ #ifndef BSP_TZ_CFG_ICUSARA #define BSP_TZ_CFG_ICUSARA (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ @@ -203,8 +204,8 @@ extern "C" { (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ - (((1 > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ - (((1 > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ @@ -212,12 +213,12 @@ extern "C" { 0xFFFF0000U) #endif -/* Security attribution for NMI registers. */ + /* Security attribution for NMI registers. */ #ifndef BSP_TZ_CFG_ICUSARB #define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ #endif -/* Security attribution for registers for DMAC channels */ + /* Security attribution for registers for DMAC channels */ #ifndef BSP_TZ_CFG_ICUSARC #define BSP_TZ_CFG_ICUSARC (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ @@ -231,29 +232,29 @@ extern "C" { 0xFFFFFF00U) #endif -/* Security attribution registers for SELSR0. */ + /* Security attribution registers for SELSR0. */ #ifndef BSP_TZ_CFG_ICUSARD #define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN0. */ + /* Security attribution registers for WUPEN0. */ #ifndef BSP_TZ_CFG_ICUSARE #define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN1. */ + /* Security attribution registers for WUPEN1. */ #ifndef BSP_TZ_CFG_ICUSARF #define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) #endif -/* Set DTCSTSAR if the Secure program uses the DTC. */ + /* Set DTCSTSAR if the Secure program uses the DTC. */ #if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) + #define BSP_TZ_CFG_DTC_USED (0U) #else #define BSP_TZ_CFG_DTC_USED (1U) #endif -/* Security attribution of FLWT and FCKMHZ registers. */ + /* Security attribution of FLWT and FCKMHZ registers. */ #ifndef BSP_TZ_CFG_FSAR /* If the CGC registers are only accessible in Secure mode, than there is no * reason for nonsecure applications to access FLWT and FCKMHZ. */ @@ -266,118 +267,123 @@ extern "C" { #endif #endif -/* Security attribution for SRAM registers. */ + /* Security attribution for SRAM registers. */ #ifndef BSP_TZ_CFG_SRAMSAR /* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ + #define BSP_TZ_CFG_SRAMSAR (\ 1 | \ ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ 4 | \ 0xFFFFFFF8U) #endif -/* Security attribution for Standby RAM registers. */ + /* Security attribution for Standby RAM registers. */ #ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) + #define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) #endif -/* Security attribution for the DMAC Bus Master MPU settings. */ + /* Security attribution for the DMAC Bus Master MPU settings. */ #ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) + /* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ + #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) #endif -/* Security Attribution Register A for BUS Control registers. */ + /* Security Attribution Register A for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) #endif -/* Security Attribution Register B for BUS Control registers. */ + /* Security Attribution Register B for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) #endif -/* Enable Uninitialized Non-Secure Application Fallback. */ + /* Enable Uninitialized Non-Secure Application Fallback. */ #ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) + #define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) #endif -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -/* Option Function Select Register 1 Security Attribution */ + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + + /* Option Function Select Register 1 Security Attribution */ #ifndef BSP_CFG_ROM_REG_OFS1_SEL #if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((0U << 0U)) | ((0U << 2U)) | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U)) #else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) #endif #endif -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* Dual Mode Select Register */ + /* Dual Mode Select Register */ #ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) #endif -/* Block Protection Register 0 */ + /* Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS0 (~( 0U)) #endif -/* Block Protection Register 1 */ + /* Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS1 (~( 0U)) #endif -/* Block Protection Register 2 */ + /* Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS2 (~( 0U)) #endif -/* Block Protection Register 3 */ + /* Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) #endif -/* Permanent Block Protection Register 0 */ + /* Permanent Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) #endif -/* Permanent Block Protection Register 1 */ + /* Permanent Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) #endif -/* Permanent Block Protection Register 2 */ + /* Permanent Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) #endif -/* Permanent Block Protection Register 3 */ + /* Permanent Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) #endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) + #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) #endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) + #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) #endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) #endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif + /* Security Attribution for Bank Select Register */ +#ifndef BSP_CFG_ROM_REG_BANKSEL_SEL + #define BSP_CFG_ROM_REG_BANKSEL_SEL (0xFFFFFFFFU) #endif #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) #endif #ifdef __cplusplus diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..d2eec08ae --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,99 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define MIKROBUS_AN_ARDUINO_A0 (BSP_IO_PORT_00_PIN_00) +#define ARDUINO_A1 (BSP_IO_PORT_00_PIN_01) +#define ARDUINO_A2 (BSP_IO_PORT_00_PIN_02) +#define ARDUINO_A3 (BSP_IO_PORT_00_PIN_03) +#define SW2 (BSP_IO_PORT_00_PIN_04) +#define SW1 (BSP_IO_PORT_00_PIN_05) +#define LED1 (BSP_IO_PORT_00_PIN_06) +#define LED2 (BSP_IO_PORT_00_PIN_07) +#define LED3 (BSP_IO_PORT_00_PIN_08) +#define ARDUINO_A4 (BSP_IO_PORT_00_PIN_14) +#define ARDUINO_A5 (BSP_IO_PORT_00_PIN_15) +#define OSPI_CLK (BSP_IO_PORT_01_PIN_00) +#define OSPI_SIO7 (BSP_IO_PORT_01_PIN_01) +#define OSPI_SIO1 (BSP_IO_PORT_01_PIN_02) +#define OSPI_SIO6 (BSP_IO_PORT_01_PIN_03) +#define OSPI_DQS (BSP_IO_PORT_01_PIN_04) +#define OSPI_SIO5 (BSP_IO_PORT_01_PIN_05) +#define OSPI_SIO0 (BSP_IO_PORT_01_PIN_06) +#define OSPI_SIO3 (BSP_IO_PORT_01_PIN_07) +#define MIKROBUS_PWM_ARDUINO_D3_PWM (BSP_IO_PORT_01_PIN_11) +#define ARDUINO_D4 (BSP_IO_PORT_01_PIN_12) +#define ARDUINO_D5 (BSP_IO_PORT_01_PIN_13) +#define ARDUINO_D6 (BSP_IO_PORT_01_PIN_14) +#define ARDUINO_D9 (BSP_IO_PORT_01_PIN_15) +#define MIKROBUS_MISO_ARDUINO_MISO_PMOD1_MISO (BSP_IO_PORT_02_PIN_02) +#define MIKROBUS_MOSI_ARDUINO_MOSI_PMOD1_MOSI (BSP_IO_PORT_02_PIN_03) +#define MIKROBUS_SCK_ARDUINO_SCK_PMOD1_SCK (BSP_IO_PORT_02_PIN_04) +#define MIKROBUS_SS_ARDUINO_SS (BSP_IO_PORT_02_PIN_05) +#define PMOD1_SS (BSP_IO_PORT_02_PIN_06) +#define ARDUINO_D8 (BSP_IO_PORT_02_PIN_07) +#define PMOD1_SS2 (BSP_IO_PORT_03_PIN_01) +#define PMOD1_SS3 (BSP_IO_PORT_03_PIN_02) +#define MIKROBUS_RESET_ARDUINO_RESET (BSP_IO_PORT_03_PIN_03) +#define QSPI_CLK (BSP_IO_PORT_03_PIN_05) +#define QSPI_CS (BSP_IO_PORT_03_PIN_06) +#define QSPI_IO0 (BSP_IO_PORT_03_PIN_07) +#define QSPI_IO1 (BSP_IO_PORT_03_PIN_08) +#define QSPI_IO2 (BSP_IO_PORT_03_PIN_09) +#define QSPI_IO3 (BSP_IO_PORT_03_PIN_10) +#define PMOD1_RST (BSP_IO_PORT_03_PIN_11) +#define PMOD2_INT (BSP_IO_PORT_04_PIN_00) +#define ETH_MDC (BSP_IO_PORT_04_PIN_01) +#define ETH_MDIO (BSP_IO_PORT_04_PIN_02) +#define ETH_RST (BSP_IO_PORT_04_PIN_03) +#define PMOD2_RST (BSP_IO_PORT_04_PIN_04) +#define ETH_TXEN (BSP_IO_PORT_04_PIN_05) +#define ETH_TXD1 (BSP_IO_PORT_04_PIN_06) +#define USBFS_VBUS (BSP_IO_PORT_04_PIN_07) +#define PMOD2_SS2 (BSP_IO_PORT_04_PIN_08) +#define MIKROBUS_INT_ARDUINO_INT0 (BSP_IO_PORT_04_PIN_09) +#define PMOD2_MISO (BSP_IO_PORT_04_PIN_10) +#define PMOD2_MOSI (BSP_IO_PORT_04_PIN_11) +#define PMOD2_SCK (BSP_IO_PORT_04_PIN_12) +#define PMOS2_SS (BSP_IO_PORT_04_PIN_13) +#define GROVE1_SDA_QWIIC_SDA (BSP_IO_PORT_04_PIN_14) +#define GROVE1_SCL_QWIIC_SCL (BSP_IO_PORT_04_PIN_15) +#define USBFS_VBUS_EN (BSP_IO_PORT_05_PIN_00) +#define USBFS_OVERCURA (BSP_IO_PORT_05_PIN_01) +#define GROVE2_SCL (BSP_IO_PORT_05_PIN_05) +#define GROVE2_SDA (BSP_IO_PORT_05_PIN_06) +#define MIKROBUS_SDA_ARDUINO_SDA (BSP_IO_PORT_05_PIN_11) +#define MIKROBUS_SCL_ARDUINO_SCL (BSP_IO_PORT_05_PIN_12) +#define OSPI_SIO4 (BSP_IO_PORT_06_PIN_00) +#define OSPI_SIO2 (BSP_IO_PORT_06_PIN_01) +#define OSPI_CS1 (BSP_IO_PORT_06_PIN_02) +#define ARDUINO_D7 (BSP_IO_PORT_06_PIN_08) +#define CAN_TXD (BSP_IO_PORT_06_PIN_09) +#define CAN_RDX (BSP_IO_PORT_06_PIN_10) +#define CAN_STBY (BSP_IO_PORT_06_PIN_11) +#define MIKROBUS_TX_ARDUINO_TX (BSP_IO_PORT_06_PIN_13) +#define MIKROBUS_RX_ARDUINO_RX (BSP_IO_PORT_06_PIN_14) +#define OSPI_RST (BSP_IO_PORT_06_PIN_15) +#define ETH_TXD0 (BSP_IO_PORT_07_PIN_00) +#define ETH_50REF (BSP_IO_PORT_07_PIN_01) +#define ETH_RXD0 (BSP_IO_PORT_07_PIN_02) +#define ETH_RXD1 (BSP_IO_PORT_07_PIN_03) +#define ETH_RXERR (BSP_IO_PORT_07_PIN_04) +#define ETH_CRSDV (BSP_IO_PORT_07_PIN_05) +#define ETH_INT (BSP_IO_PORT_07_PIN_06) +#define USBHS_OVERCURA (BSP_IO_PORT_07_PIN_07) +#define PMOD2_SS3 (BSP_IO_PORT_07_PIN_08) +#define PMOD1_INT (BSP_IO_PORT_09_PIN_05) +#define USBHS_VBUS_EN (BSP_IO_PORT_11_PIN_00) +#define USBHS_VBUS (BSP_IO_PORT_11_PIN_01) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA6M5 EK */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/bsp_clock_cfg.h index 0eb5e0516..0eb5e0516 100644 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/bsp_clock_cfg.h diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include <stdint.h> +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..6b814d74a --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/pin_data.c @@ -0,0 +1,411 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_00_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_00_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_00_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_GPT1) + }, + { + .pin = BSP_IO_PORT_01_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_03_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_04_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_04_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_04_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_HIGH) + }, + { + .pin = BSP_IO_PORT_04_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_04_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_04_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_04_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_05_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_NMOS_ENABLE | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_05_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_NMOS_ENABLE | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_05_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_05_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_06_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_06_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_06_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_06_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_06_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CAN) + }, + { + .pin = BSP_IO_PORT_06_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CAN) + }, + { + .pin = BSP_IO_PORT_06_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_06_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_06_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_06_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_MID | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_HIGH) + }, + { + .pin = BSP_IO_PORT_07_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_07_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, + { + .pin = BSP_IO_PORT_07_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_09_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_11_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, + { + .pin = BSP_IO_PORT_11_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld b/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld new file mode 100644 index 000000000..605eef7d2 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld @@ -0,0 +1,769 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld new file mode 100644 index 000000000..19864683f --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x80000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x200000; + DATA_FLASH_START = 0x08000000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x0100A100; + OPTION_SETTING_LENGTH = 0x100; + OPTION_SETTING_S_START = 0x0100A200; + OPTION_SETTING_S_LENGTH = 0x100; + ID_CODE_START = 0x00000000; + ID_CODE_LENGTH = 0x0; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x68000000; + OSPI_DEVICE_0_LENGTH = 0x8000000; + OSPI_DEVICE_1_START = 0x70000000; + OSPI_DEVICE_1_LENGTH = 0x10000000; diff --git a/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..4544d0f2a --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml @@ -0,0 +1,670 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<raConfiguration version="9"> + <generalSettings> + <option key="#Board#" value="board.ra6m5ek"/> + <option key="CPU" value="RA6M5"/> + <option key="Core" value="CM33"/> + <option key="#TargetName#" value="R7FA6M5BH3CFC"/> + <option key="#TargetARCHITECTURE#" value="cortex-m33"/> + <option key="#DeviceCommand#" value="R7FA6M5BH"/> + <option key="#RTOS#" value="_none"/> + <option key="#pinconfiguration#" value="R7FA6M5BH3CFC.pincfg"/> + <option key="#FSPVersion#" value="5.6.0"/> + <option key="#ConfigurationFragments#" value="Renesas##BSP##Board##ra6m5_ek##"/> + <option key="#SELECTED_TOOLCHAIN#" value="com.renesas.cdt.managedbuild.gnuarm.toolchain."/> + </generalSettings> + <raBspConfiguration> + <config id="config.bsp.ra6m5.R7FA6M5BH3CFC"> + <property id="config.bsp.part_number" value="config.bsp.part_number.value"/> + <property id="config.bsp.rom_size_bytes" value="config.bsp.rom_size_bytes.value"/> + <property id="config.bsp.rom_size_bytes_hidden" value="2097152"/> + <property id="config.bsp.ram_size_bytes" value="config.bsp.ram_size_bytes.value"/> + <property id="config.bsp.data_flash_size_bytes" value="config.bsp.data_flash_size_bytes.value"/> + <property id="config.bsp.package_style" value="config.bsp.package_style.value"/> + <property id="config.bsp.package_pins" value="config.bsp.package_pins.value"/> + <property id="config.bsp.irq_count_hidden" value="96"/> + </config> + <config id="config.bsp.ra6m5"> + <property id="config.bsp.series" value="config.bsp.series.value"/> + </config> + <config id="config.bsp.ra6m5.fsp"> + <property id="config.bsp.fsp.inline_irq_functions" value="config.bsp.common.inline_irq_functions.enabled"/> + <property id="config.bsp.fsp.tz.exception_response" value="config.bsp.fsp.tz.exception_response.nmi"/> + <property id="config.bsp.fsp.tz.cmsis.bfhfnmins" value="config.bsp.fsp.tz.cmsis.bfhfnmins.secure"/> + <property id="config.bsp.fsp.tz.cmsis.sysresetreqs" value="config.bsp.fsp.tz.cmsis.sysresetreqs.secure_only"/> + <property id="config.bsp.fsp.tz.cmsis.s_priority_boost" value="config.bsp.fsp.tz.cmsis.s_priority_boost.disabled"/> + <property id="config.bsp.fsp.tz.csar" value="config.bsp.fsp.tz.csar.both"/> + <property id="config.bsp.fsp.tz.rstsar" value="config.bsp.fsp.tz.rstsar.both"/> + <property id="config.bsp.fsp.tz.bbfsar" value="config.bsp.fsp.tz.bbfsar.both"/> + <property id="config.bsp.fsp.tz.sramsar.sramprcr" value="config.bsp.fsp.tz.sramsar.sramprcr.both"/> + <property id="config.bsp.fsp.tz.sramsar.sramecc" value="config.bsp.fsp.tz.sramsar.sramecc.both"/> + <property id="config.bsp.fsp.tz.stbramsar" value="config.bsp.fsp.tz.stbramsar.both"/> + <property id="config.bsp.fsp.tz.bussara" value="config.bsp.fsp.tz.bussara.both"/> + <property id="config.bsp.fsp.tz.bussarb" value="config.bsp.fsp.tz.bussarb.both"/> + <property id="config.bsp.fsp.tz.banksel_sel" value="config.bsp.fsp.tz.banksel_sel.both"/> + <property id="config.bsp.fsp.tz.uninitialized_ns_application_fallback" value="config.bsp.fsp.tz.uninitialized_ns_application_fallback.enabled"/> + <property id="config.bsp.fsp.cache_line_size" value="config.bsp.fsp.cache_line_size.32"/> + <property id="config.bsp.fsp.OFS0.iwdt_start_mode" value="config.bsp.fsp.OFS0.iwdt_start_mode.disabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_timeout" value="config.bsp.fsp.OFS0.iwdt_timeout.2048"/> + <property id="config.bsp.fsp.OFS0.iwdt_divisor" value="config.bsp.fsp.OFS0.iwdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_end" value="config.bsp.fsp.OFS0.iwdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_start" value="config.bsp.fsp.OFS0.iwdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.iwdt_reset_interrupt" value="config.bsp.fsp.OFS0.iwdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.iwdt_stop_control" value="config.bsp.fsp.OFS0.iwdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS0.wdt_start_mode" value="config.bsp.fsp.OFS0.wdt_start_mode.register"/> + <property id="config.bsp.fsp.OFS0.wdt_timeout" value="config.bsp.fsp.OFS0.wdt_timeout.16384"/> + <property id="config.bsp.fsp.OFS0.wdt_divisor" value="config.bsp.fsp.OFS0.wdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.wdt_window_end" value="config.bsp.fsp.OFS0.wdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.wdt_window_start" value="config.bsp.fsp.OFS0.wdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.wdt_reset_interrupt" value="config.bsp.fsp.OFS0.wdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.wdt_stop_control" value="config.bsp.fsp.OFS0.wdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS1_SEL.voltage_detection0_level" value="config.bsp.fsp.OFS1_SEL.voltage_detection0_level.secure"/> + <property id="config.bsp.fsp.OFS1_SEL.voltage_detection0.start" value="config.bsp.fsp.OFS1_SEL.voltage_detection0.start.secure"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0.start" value="config.bsp.fsp.OFS1.voltage_detection0.start.disabled"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0_level" value="config.bsp.fsp.OFS1.voltage_detection0_level.280"/> + <property id="config.bsp.fsp.OFS1.hoco_osc" value="config.bsp.fsp.OFS1.hoco_osc.disabled"/> + <property id="config.bsp.fsp.BPS.BPS0" value=""/> + <property id="config.bsp.fsp.BPS.BPS1" value=""/> + <property id="config.bsp.fsp.BPS.BPS2" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS0" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS1" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS2" value=""/> + <property id="config.bsp.fsp.dual_bank" value="config.bsp.fsp.dual_bank.disabled"/> + <property id="config.bsp.fsp.hoco_fll" value="config.bsp.fsp.hoco_fll.disabled"/> + <property id="config.bsp.common.main_osc_wait" value="config.bsp.common.main_osc_wait.wait_8163"/> + <property id="config.bsp.fsp.mcu.adc.max_freq_hz" value="50000000"/> + <property id="config.bsp.fsp.mcu.sci_uart.max_baud" value="16666666"/> + <property id="config.bsp.fsp.mcu.adc.sample_and_hold" value="0"/> + <property id="config.bsp.fsp.mcu.adc.sensors_are_exclusive" value="0"/> + <property id="config.bsp.fsp.mcu.sci_spi.max_bitrate" value="25000000"/> + <property id="config.bsp.fsp.mcu.spi.max_bitrate" value="50000000"/> + <property id="config.bsp.fsp.mcu.iic_master.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_master.fastplus_channels" value="0x3"/> + <property id="config.bsp.fsp.mcu.iic_slave.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_slave.fastplus_channels" value="0x3"/> + <property id="config.bsp.fsp.mcu.canfd.num_channels" value="2"/> + <property id="config.bsp.fsp.mcu.canfd.rx_fifos" value="8"/> + <property id="config.bsp.fsp.mcu.canfd.buffer_ram" value="4864"/> + <property id="config.bsp.fsp.mcu.canfd.afl_rules" value="128"/> + <property id="config.bsp.fsp.mcu.canfd.afl_rules_each_chnl" value="64"/> + <property id="config.bsp.fsp.mcu.canfd.max_data_rate_hz" value="5"/> + <property id="config.bsp.fsp.mcu.sci_uart.cstpen_channels" value="0x03F9"/> + <property id="config.bsp.fsp.mcu.gpt.pin_count_source_channels" value="0xFFFF"/> + <property id="config.bsp.fsp.mcu.adc_dmac.samples_per_channel" value="65535"/> + </config> + <config id="config.bsp.ra"> + <property id="config.bsp.common.main" value="0x1000"/> + <property id="config.bsp.common.heap" value="0x1000"/> + <property id="config.bsp.common.vcc" value="3300"/> + <property id="config.bsp.common.checking" value="config.bsp.common.checking.disabled"/> + <property id="config.bsp.common.assert" value="config.bsp.common.assert.none"/> + <property id="config.bsp.common.error_log" value="config.bsp.common.error_log.none"/> + <property id="config.bsp.common.soft_reset" value="config.bsp.common.soft_reset.disabled"/> + <property id="config.bsp.common.main_osc_populated" value="config.bsp.common.main_osc_populated.enabled"/> + <property id="config.bsp.common.pfs_protect" value="config.bsp.common.pfs_protect.enabled"/> + <property id="config.bsp.common.c_runtime_init" value="config.bsp.common.c_runtime_init.enabled"/> + <property id="config.bsp.common.early_init" value="config.bsp.common.early_init.disabled"/> + <property id="config.bsp.common.main_osc_clock_source" value="config.bsp.common.main_osc_clock_source.crystal"/> + <property id="config.bsp.common.subclock_populated" value="config.bsp.common.subclock_populated.enabled"/> + <property id="config.bsp.common.subclock_drive" value="config.bsp.common.subclock_drive.standard"/> + <property id="config.bsp.common.subclock_stabilization_ms" value="1000"/> + </config> + </raBspConfiguration> + <raClockConfiguration> + <node id="board.clock.xtal.freq" mul="24000000" option="_edit"/> + <node id="board.clock.hoco.freq" option="board.clock.hoco.freq.20m"/> + <node id="board.clock.loco.freq" option="board.clock.loco.freq.32768"/> + <node id="board.clock.moco.freq" option="board.clock.moco.freq.8m"/> + <node id="board.clock.subclk.freq" option="board.clock.subclk.freq.32768"/> + <node id="board.clock.pll.source" option="board.clock.pll.source.xtal"/> + <node id="board.clock.pll.div" option="board.clock.pll.div.3"/> + <node id="board.clock.pll.mul" option="board.clock.pll.mul.250"/> + <node id="board.clock.pll.display" option="board.clock.pll.display.value"/> + <node id="board.clock.pll2.source" option="board.clock.pll2.source.disabled"/> + <node id="board.clock.pll2.div" option="board.clock.pll2.div.2"/> + <node id="board.clock.pll2.mul" option="board.clock.pll2.mul.200"/> + <node id="board.clock.pll2.display" option="board.clock.pll2.display.value"/> + <node id="board.clock.clock.source" option="board.clock.clock.source.pll"/> + <node id="board.clock.clkout.source" option="board.clock.clkout.source.disabled"/> + <node id="board.clock.uclk.source" option="board.clock.uclk.source.disabled"/> + <node id="board.clock.u60ck.source" option="board.clock.u60ck.source.disabled"/> + <node id="board.clock.octaspiclk.source" option="board.clock.octaspiclk.source.disabled"/> + <node id="board.clock.canfdclk.source" option="board.clock.canfdclk.source.disabled"/> + <node id="board.clock.cecclk.source" option="board.clock.cecclk.source.disabled"/> + <node id="board.clock.iclk.div" option="board.clock.iclk.div.1"/> + <node id="board.clock.pclka.div" option="board.clock.pclka.div.2"/> + <node id="board.clock.pclkb.div" option="board.clock.pclkb.div.4"/> + <node id="board.clock.pclkc.div" option="board.clock.pclkc.div.4"/> + <node id="board.clock.pclkd.div" option="board.clock.pclkd.div.2"/> + <node id="board.clock.bclk.div" option="board.clock.bclk.div.2"/> + <node id="board.clock.bclkout.div" option="board.clock.bclkout.div.2"/> + <node id="board.clock.fclk.div" option="board.clock.fclk.div.4"/> + <node id="board.clock.clkout.div" option="board.clock.clkout.div.1"/> + <node id="board.clock.uclk.div" option="board.clock.uclk.div.5"/> + <node id="board.clock.u60ck.div" option="board.clock.u60ck.div.1"/> + <node id="board.clock.octaspiclk.div" option="board.clock.octaspiclk.div.1"/> + <node id="board.clock.canfdclk.div" option="board.clock.canfdclk.div.6"/> + <node id="board.clock.cecclk.div" option="board.clock.cecclk.div.1"/> + <node id="board.clock.iclk.display" option="board.clock.iclk.display.value"/> + <node id="board.clock.pclka.display" option="board.clock.pclka.display.value"/> + <node id="board.clock.pclkb.display" option="board.clock.pclkb.display.value"/> + <node id="board.clock.pclkc.display" option="board.clock.pclkc.display.value"/> + <node id="board.clock.pclkd.display" option="board.clock.pclkd.display.value"/> + <node id="board.clock.bclk.display" option="board.clock.bclk.display.value"/> + <node id="board.clock.bclkout.display" option="board.clock.bclkout.display.value"/> + <node id="board.clock.fclk.display" option="board.clock.fclk.display.value"/> + <node id="board.clock.clkout.display" option="board.clock.clkout.display.value"/> + <node id="board.clock.uclk.display" option="board.clock.uclk.display.value"/> + <node id="board.clock.u60ck.display" option="board.clock.u60ck.display.value"/> + <node id="board.clock.octaspiclk.display" option="board.clock.octaspiclk.display.value"/> + <node id="board.clock.canfdclk.display" option="board.clock.canfdclk.display.value"/> + <node id="board.clock.cecclk.display" option="board.clock.cecclk.display.value"/> + </raClockConfiguration> + <raComponentSelection> + <component apiversion="" class="Projects" condition="" group="all" subgroup="baremetal_blinky" variant="" vendor="Renesas" version="5.6.0"> + <description>Simple application that blinks an LED. No RTOS included.</description> + <originalPack>Renesas.RA_baremetal_blinky.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="Common" condition="" group="all" subgroup="fsp_common" variant="" vendor="Renesas" version="5.6.0"> + <description>Board Support Package Common Files</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_ioport" variant="" vendor="Renesas" version="5.6.0"> + <description>I/O Port</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="CMSIS" condition="" group="CMSIS5" subgroup="CoreM" variant="" vendor="Arm" version="6.1.0+fsp.5.6.0"> + <description>Arm CMSIS Version 6 - Core (M)</description> + <originalPack>Arm.CMSIS6.6.1.0+fsp.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="Board" subgroup="ra6m5_ek" variant="" vendor="Renesas" version="5.6.0"> + <description>RA6M5-EK Board Support Files</description> + <originalPack>Renesas.RA_board_ra6m5_ek.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m5" subgroup="device" variant="R7FA6M5BH3CFC" vendor="Renesas" version="5.6.0"> + <description>Board support package for R7FA6M5BH3CFC</description> + <originalPack>Renesas.RA_mcu_ra6m5.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m5" subgroup="device" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA6M5</description> + <originalPack>Renesas.RA_mcu_ra6m5.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m5" subgroup="fsp" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA6M5 - FSP Data</description> + <originalPack>Renesas.RA_mcu_ra6m5.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra6m5" subgroup="events" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA6M5 - Events</description> + <originalPack>Renesas.RA_mcu_ra6m5.5.6.0.pack</originalPack> + </component> + </raComponentSelection> + <raElcConfiguration/> + <raIcuConfiguration/> + <raModuleConfiguration> + <module id="module.driver.ioport_on_ioport.0"> + <property id="module.driver.ioport.name" value="g_ioport"/> + <property id="module.driver.ioport.elc_trigger_ioport1" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport2" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport3" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport4" value="_disabled"/> + <property id="module.driver.ioport.pincfg" value="g_bsp_pin_cfg"/> + </module> + <context id="_hal.0"> + <stack module="module.driver.ioport_on_ioport.0"/> + </context> + <config id="config.driver.ioport"> + <property id="config.driver.ioport.checking" value="config.driver.ioport.checking.system"/> + </config> + </raModuleConfiguration> + <raPinConfiguration> + <symbolicName propertyId="p000.symbolic_name" value="MIKROBUS_AN_ARDUINO_A0"/> + <symbolicName propertyId="p001.symbolic_name" value="ARDUINO_A1"/> + <symbolicName propertyId="p002.symbolic_name" value="ARDUINO_A2"/> + <symbolicName propertyId="p003.symbolic_name" value="ARDUINO_A3"/> + <symbolicName propertyId="p004.symbolic_name" value="SW2"/> + <symbolicName propertyId="p005.symbolic_name" value="SW1"/> + <symbolicName propertyId="p006.symbolic_name" value="LED1"/> + <symbolicName propertyId="p007.symbolic_name" value="LED2"/> + <symbolicName propertyId="p008.symbolic_name" value="LED3"/> + <symbolicName propertyId="p014.symbolic_name" value="ARDUINO_A4"/> + <symbolicName propertyId="p015.symbolic_name" value="ARDUINO_A5"/> + <symbolicName propertyId="p100.symbolic_name" value="OSPI_CLK"/> + <symbolicName propertyId="p101.symbolic_name" value="OSPI_SIO7"/> + <symbolicName propertyId="p102.symbolic_name" value="OSPI_SIO1"/> + <symbolicName propertyId="p103.symbolic_name" value="OSPI_SIO6"/> + <symbolicName propertyId="p104.symbolic_name" value="OSPI_DQS"/> + <symbolicName propertyId="p105.symbolic_name" value="OSPI_SIO5"/> + <symbolicName propertyId="p106.symbolic_name" value="OSPI_SIO0"/> + <symbolicName propertyId="p107.symbolic_name" value="OSPI_SIO3"/> + <symbolicName propertyId="p111.symbolic_name" value="MIKROBUS_PWM_ARDUINO_D3_PWM"/> + <symbolicName propertyId="p112.symbolic_name" value="ARDUINO_D4"/> + <symbolicName propertyId="p113.symbolic_name" value="ARDUINO_D5"/> + <symbolicName propertyId="p114.symbolic_name" value="ARDUINO_D6"/> + <symbolicName propertyId="p115.symbolic_name" value="ARDUINO_D9"/> + <symbolicName propertyId="p202.symbolic_name" value="MIKROBUS_MISO_ARDUINO_MISO_PMOD1_MISO"/> + <symbolicName propertyId="p203.symbolic_name" value="MIKROBUS_MOSI_ARDUINO_MOSI_PMOD1_MOSI"/> + <symbolicName propertyId="p204.symbolic_name" value="MIKROBUS_SCK_ARDUINO_SCK_PMOD1_SCK"/> + <symbolicName propertyId="p205.symbolic_name" value="MIKROBUS_SS_ARDUINO_SS"/> + <symbolicName propertyId="p206.symbolic_name" value="PMOD1_SS"/> + <symbolicName propertyId="p207.symbolic_name" value="ARDUINO_D8"/> + <symbolicName propertyId="p301.symbolic_name" value="PMOD1_SS2"/> + <symbolicName propertyId="p302.symbolic_name" value="PMOD1_SS3"/> + <symbolicName propertyId="p303.symbolic_name" value="MIKROBUS_RESET_ARDUINO_RESET"/> + <symbolicName propertyId="p305.symbolic_name" value="QSPI_CLK"/> + <symbolicName propertyId="p306.symbolic_name" value="QSPI_CS"/> + <symbolicName propertyId="p307.symbolic_name" value="QSPI_IO0"/> + <symbolicName propertyId="p308.symbolic_name" value="QSPI_IO1"/> + <symbolicName propertyId="p309.symbolic_name" value="QSPI_IO2"/> + <symbolicName propertyId="p310.symbolic_name" value="QSPI_IO3"/> + <symbolicName propertyId="p311.symbolic_name" value="PMOD1_RST"/> + <symbolicName propertyId="p400.symbolic_name" value="PMOD2_INT"/> + <symbolicName propertyId="p401.symbolic_name" value="ETH_MDC"/> + <symbolicName propertyId="p402.symbolic_name" value="ETH_MDIO"/> + <symbolicName propertyId="p403.symbolic_name" value="ETH_RST"/> + <symbolicName propertyId="p404.symbolic_name" value="PMOD2_RST"/> + <symbolicName propertyId="p405.symbolic_name" value="ETH_TXEN"/> + <symbolicName propertyId="p406.symbolic_name" value="ETH_TXD1"/> + <symbolicName propertyId="p407.symbolic_name" value="USBFS_VBUS"/> + <symbolicName propertyId="p408.symbolic_name" value="PMOD2_SS2"/> + <symbolicName propertyId="p409.symbolic_name" value="MIKROBUS_INT_ARDUINO_INT0"/> + <symbolicName propertyId="p410.symbolic_name" value="PMOD2_MISO"/> + <symbolicName propertyId="p411.symbolic_name" value="PMOD2_MOSI"/> + <symbolicName propertyId="p412.symbolic_name" value="PMOD2_SCK"/> + <symbolicName propertyId="p413.symbolic_name" value="PMOS2_SS"/> + <symbolicName propertyId="p414.symbolic_name" value="GROVE1_SDA_QWIIC_SDA"/> + <symbolicName propertyId="p415.symbolic_name" value="GROVE1_SCL_QWIIC_SCL"/> + <symbolicName propertyId="p500.symbolic_name" value="USBFS_VBUS_EN"/> + <symbolicName propertyId="p501.symbolic_name" value="USBFS_OVERCURA"/> + <symbolicName propertyId="p505.symbolic_name" value="GROVE2_SCL"/> + <symbolicName propertyId="p506.symbolic_name" value="GROVE2_SDA"/> + <symbolicName propertyId="p511.symbolic_name" value="MIKROBUS_SDA_ARDUINO_SDA"/> + <symbolicName propertyId="p512.symbolic_name" value="MIKROBUS_SCL_ARDUINO_SCL"/> + <symbolicName propertyId="p600.symbolic_name" value="OSPI_SIO4"/> + <symbolicName propertyId="p601.symbolic_name" value="OSPI_SIO2"/> + <symbolicName propertyId="p602.symbolic_name" value="OSPI_CS1"/> + <symbolicName propertyId="p608.symbolic_name" value="ARDUINO_D7"/> + <symbolicName propertyId="p609.symbolic_name" value="CAN_TXD"/> + <symbolicName propertyId="p610.symbolic_name" value="CAN_RDX"/> + <symbolicName propertyId="p611.symbolic_name" value="CAN_STBY"/> + <symbolicName propertyId="p613.symbolic_name" value="MIKROBUS_TX_ARDUINO_TX"/> + <symbolicName propertyId="p614.symbolic_name" value="MIKROBUS_RX_ARDUINO_RX"/> + <symbolicName propertyId="p615.symbolic_name" value="OSPI_RST"/> + <symbolicName propertyId="p700.symbolic_name" value="ETH_TXD0"/> + <symbolicName propertyId="p701.symbolic_name" value="ETH_50REF"/> + <symbolicName propertyId="p702.symbolic_name" value="ETH_RXD0"/> + <symbolicName propertyId="p703.symbolic_name" value="ETH_RXD1"/> + <symbolicName propertyId="p704.symbolic_name" value="ETH_RXERR"/> + <symbolicName propertyId="p705.symbolic_name" value="ETH_CRSDV"/> + <symbolicName propertyId="p706.symbolic_name" value="ETH_INT"/> + <symbolicName propertyId="p707.symbolic_name" value="USBHS_OVERCURA"/> + <symbolicName propertyId="p708.symbolic_name" value="PMOD2_SS3"/> + <symbolicName propertyId="p905.symbolic_name" value="PMOD1_INT"/> + <symbolicName propertyId="pb00.symbolic_name" value="USBHS_VBUS_EN"/> + <symbolicName propertyId="pb01.symbolic_name" value="USBHS_VBUS"/> + <pincfg active="true" name="RA6M5 EK" selected="true" symbol="g_bsp_pin_cfg"> + <configSetting altId="adc0.an00.p000" configurationId="adc0.an00"/> + <configSetting altId="adc0.an01.p001" configurationId="adc0.an01"/> + <configSetting altId="adc0.an02.p002" configurationId="adc0.an02"/> + <configSetting altId="adc0.an03.p003" configurationId="adc0.an03"/> + <configSetting altId="adc0.an12.p014" configurationId="adc0.an12"/> + <configSetting altId="adc0.an13.p015" configurationId="adc0.an13"/> + <configSetting altId="adc0.mode.custom" configurationId="adc0.mode"/> + <configSetting altId="can1.crx.p610" configurationId="can1.crx"/> + <configSetting altId="can1.ctx.p609" configurationId="can1.ctx"/> + <configSetting altId="can1.mode.enabled.free" configurationId="can1.mode"/> + <configSetting altId="cgc0.extal.p212" configurationId="cgc0.extal"/> + <configSetting altId="cgc0.mode.mainsub" configurationId="cgc0.mode"/> + <configSetting altId="cgc0.xtal.p213" configurationId="cgc0.xtal"/> + <configSetting altId="debug0.mode.swd" configurationId="debug0.mode"/> + <configSetting altId="debug0.swclk.p300" configurationId="debug0.swclk"/> + <configSetting altId="debug0.swdio.p108" configurationId="debug0.swdio"/> + <configSetting altId="etherc0.rmii.crs_dv.p705" configurationId="etherc0.rmii.crs_dv"/> + <configSetting altId="etherc0.rmii.mdc.p401" configurationId="etherc0.rmii.mdc"/> + <configSetting altId="etherc0.rmii.mdio.p402" configurationId="etherc0.rmii.mdio"/> + <configSetting altId="etherc0.rmii.mode.rmii.free" configurationId="etherc0.rmii.mode"/> + <configSetting altId="etherc0.rmii.pairing.free" configurationId="etherc0.rmii.pairing"/> + <configSetting altId="etherc0.rmii.ref50ck.p701" configurationId="etherc0.rmii.ref50ck"/> + <configSetting altId="etherc0.rmii.rx_er.p704" configurationId="etherc0.rmii.rx_er"/> + <configSetting altId="etherc0.rmii.rxd0.p702" configurationId="etherc0.rmii.rxd0"/> + <configSetting altId="etherc0.rmii.rxd1.p703" configurationId="etherc0.rmii.rxd1"/> + <configSetting altId="etherc0.rmii.txd0.p700" configurationId="etherc0.rmii.txd0"/> + <configSetting altId="etherc0.rmii.txd1.p406" configurationId="etherc0.rmii.txd1"/> + <configSetting altId="etherc0.rmii.txd_en.p405" configurationId="etherc0.rmii.txd_en"/> + <configSetting altId="gpt3.gtioca.p111" configurationId="gpt3.gtioca"/> + <configSetting altId="gpt3.mode.gtiocaorgtiocb.free" configurationId="gpt3.mode"/> + <configSetting altId="iic1.mode.enabled.a" configurationId="iic1.mode"/> + <configSetting altId="iic1.scl.p512" configurationId="iic1.scl"/> + <configSetting altId="iic1.sda.p511" configurationId="iic1.sda"/> + <configSetting altId="iic2.mode.enabled.free" configurationId="iic2.mode"/> + <configSetting altId="iic2.pairing.free" configurationId="iic2.pairing"/> + <configSetting altId="iic2.scl.p415" configurationId="iic2.scl"/> + <configSetting altId="iic2.sda.p414" configurationId="iic2.sda"/> + <configSetting altId="ospi0.mode.custom.free" configurationId="ospi0.mode"/> + <configSetting altId="ospi0.omcs1.p602" configurationId="ospi0.omcs1"/> + <configSetting altId="ospi0.omdqs.p104" configurationId="ospi0.omdqs"/> + <configSetting altId="ospi0.omsclk.p100" configurationId="ospi0.omsclk"/> + <configSetting altId="ospi0.omsio0.p106" configurationId="ospi0.omsio0"/> + <configSetting altId="ospi0.omsio1.p102" configurationId="ospi0.omsio1"/> + <configSetting altId="ospi0.omsio2.p601" configurationId="ospi0.omsio2"/> + <configSetting altId="ospi0.omsio3.p107" configurationId="ospi0.omsio3"/> + <configSetting altId="ospi0.omsio4.p600" configurationId="ospi0.omsio4"/> + <configSetting altId="ospi0.omsio5.p105" configurationId="ospi0.omsio5"/> + <configSetting altId="ospi0.omsio6.p103" configurationId="ospi0.omsio6"/> + <configSetting altId="ospi0.omsio7.p101" configurationId="ospi0.omsio7"/> + <configSetting altId="ospi0.pairing.free" configurationId="ospi0.pairing"/> + <configSetting altId="p000.asel" configurationId="p000"/> + <configSetting altId="p000.gpio_mode.gpio_mode_an" configurationId="p000.gpio_mode"/> + <configSetting altId="p001.asel" configurationId="p001"/> + <configSetting altId="p001.gpio_mode.gpio_mode_an" configurationId="p001.gpio_mode"/> + <configSetting altId="p002.asel" configurationId="p002"/> + <configSetting altId="p002.gpio_mode.gpio_mode_an" configurationId="p002.gpio_mode"/> + <configSetting altId="p003.asel" configurationId="p003"/> + <configSetting altId="p003.gpio_mode.gpio_mode_an" configurationId="p003.gpio_mode"/> + <configSetting altId="p004.input" configurationId="p004"/> + <configSetting altId="p004.gpio_irq.gpio_irq_enabled" configurationId="p004.gpio_irq"/> + <configSetting altId="p004.gpio_mode.gpio_mode_in" configurationId="p004.gpio_mode"/> + <configSetting altId="p005.input" configurationId="p005"/> + <configSetting altId="p005.gpio_irq.gpio_irq_enabled" configurationId="p005.gpio_irq"/> + <configSetting altId="p005.gpio_mode.gpio_mode_in" configurationId="p005.gpio_mode"/> + <configSetting altId="p006.output.low" configurationId="p006"/> + <configSetting altId="p006.gpio_mode.gpio_mode_out.low" configurationId="p006.gpio_mode"/> + <configSetting altId="p007.output.low" configurationId="p007"/> + <configSetting altId="p007.gpio_mode.gpio_mode_out.low" configurationId="p007.gpio_mode"/> + <configSetting altId="p008.output.low" configurationId="p008"/> + <configSetting altId="p008.gpio_mode.gpio_mode_out.low" configurationId="p008.gpio_mode"/> + <configSetting altId="p014.asel" configurationId="p014"/> + <configSetting altId="p014.gpio_mode.gpio_mode_an" configurationId="p014.gpio_mode"/> + <configSetting altId="p015.asel" configurationId="p015"/> + <configSetting altId="p015.gpio_mode.gpio_mode_an" configurationId="p015.gpio_mode"/> + <configSetting altId="p100.ospi0.omsclk" configurationId="p100"/> + <configSetting altId="p100.gpio_speed.gpio_speed_highspeedhigh" configurationId="p100.gpio_drivecapacity"/> + <configSetting altId="p100.gpio_mode.gpio_mode_peripheral" configurationId="p100.gpio_mode"/> + <configSetting altId="p101.ospi0.omsio7" configurationId="p101"/> + <configSetting altId="p101.gpio_speed.gpio_speed_highspeedhigh" configurationId="p101.gpio_drivecapacity"/> + <configSetting altId="p101.gpio_mode.gpio_mode_peripheral" configurationId="p101.gpio_mode"/> + <configSetting altId="p102.ospi0.omsio1" configurationId="p102"/> + <configSetting altId="p102.gpio_speed.gpio_speed_highspeedhigh" configurationId="p102.gpio_drivecapacity"/> + <configSetting altId="p102.gpio_mode.gpio_mode_peripheral" configurationId="p102.gpio_mode"/> + <configSetting altId="p103.ospi0.omsio6" configurationId="p103"/> + <configSetting altId="p103.gpio_speed.gpio_speed_highspeedhigh" configurationId="p103.gpio_drivecapacity"/> + <configSetting altId="p103.gpio_mode.gpio_mode_peripheral" configurationId="p103.gpio_mode"/> + <configSetting altId="p104.ospi0.omdqs" configurationId="p104"/> + <configSetting altId="p104.gpio_speed.gpio_speed_highspeedhigh" configurationId="p104.gpio_drivecapacity"/> + <configSetting altId="p104.gpio_mode.gpio_mode_peripheral" configurationId="p104.gpio_mode"/> + <configSetting altId="p105.ospi0.omsio5" configurationId="p105"/> + <configSetting altId="p105.gpio_speed.gpio_speed_highspeedhigh" configurationId="p105.gpio_drivecapacity"/> + <configSetting altId="p105.gpio_mode.gpio_mode_peripheral" configurationId="p105.gpio_mode"/> + <configSetting altId="p106.ospi0.omsio0" configurationId="p106"/> + <configSetting altId="p106.gpio_speed.gpio_speed_highspeedhigh" configurationId="p106.gpio_drivecapacity"/> + <configSetting altId="p106.gpio_mode.gpio_mode_peripheral" configurationId="p106.gpio_mode"/> + <configSetting altId="p107.ospi0.omsio3" configurationId="p107"/> + <configSetting altId="p107.gpio_speed.gpio_speed_highspeedhigh" configurationId="p107.gpio_drivecapacity"/> + <configSetting altId="p107.gpio_mode.gpio_mode_peripheral" configurationId="p107.gpio_mode"/> + <configSetting altId="p108.debug0.swdio" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p111.gpt3.gtioca" configurationId="p111"/> + <configSetting altId="p111.gpio_speed.gpio_speed_high" configurationId="p111.gpio_drivecapacity"/> + <configSetting altId="p111.gpio_mode.gpio_mode_peripheral" configurationId="p111.gpio_mode"/> + <configSetting altId="p112.output.low" configurationId="p112"/> + <configSetting altId="p112.gpio_speed.gpio_speed_high" configurationId="p112.gpio_drivecapacity"/> + <configSetting altId="p112.gpio_mode.gpio_mode_out.low" configurationId="p112.gpio_mode"/> + <configSetting altId="p113.output.low" configurationId="p113"/> + <configSetting altId="p113.gpio_speed.gpio_speed_high" configurationId="p113.gpio_drivecapacity"/> + <configSetting altId="p113.gpio_mode.gpio_mode_out.low" configurationId="p113.gpio_mode"/> + <configSetting altId="p114.output.low" configurationId="p114"/> + <configSetting altId="p114.gpio_speed.gpio_speed_high" configurationId="p114.gpio_drivecapacity"/> + <configSetting altId="p114.gpio_mode.gpio_mode_out.low" configurationId="p114.gpio_mode"/> + <configSetting altId="p115.output.low" configurationId="p115"/> + <configSetting altId="p115.gpio_speed.gpio_speed_high" configurationId="p115.gpio_drivecapacity"/> + <configSetting altId="p115.gpio_mode.gpio_mode_out.low" configurationId="p115.gpio_mode"/> + <configSetting altId="p202.spi0.miso" configurationId="p202"/> + <configSetting altId="p202.gpio_speed.gpio_speed_high" configurationId="p202.gpio_drivecapacity"/> + <configSetting altId="p202.gpio_mode.gpio_mode_peripheral" configurationId="p202.gpio_mode"/> + <configSetting altId="p203.spi0.mosi" configurationId="p203"/> + <configSetting altId="p203.gpio_speed.gpio_speed_high" configurationId="p203.gpio_drivecapacity"/> + <configSetting altId="p203.gpio_mode.gpio_mode_peripheral" configurationId="p203.gpio_mode"/> + <configSetting altId="p204.spi0.rspck" configurationId="p204"/> + <configSetting altId="p204.gpio_speed.gpio_speed_high" configurationId="p204.gpio_drivecapacity"/> + <configSetting altId="p204.gpio_mode.gpio_mode_peripheral" configurationId="p204.gpio_mode"/> + <configSetting altId="p205.spi0.ssl0" configurationId="p205"/> + <configSetting altId="p205.gpio_speed.gpio_speed_high" configurationId="p205.gpio_drivecapacity"/> + <configSetting altId="p205.gpio_mode.gpio_mode_peripheral" configurationId="p205.gpio_mode"/> + <configSetting altId="p206.spi0.ssl1" configurationId="p206"/> + <configSetting altId="p206.gpio_speed.gpio_speed_high" configurationId="p206.gpio_drivecapacity"/> + <configSetting altId="p206.gpio_mode.gpio_mode_peripheral" configurationId="p206.gpio_mode"/> + <configSetting altId="p207.output.low" configurationId="p207"/> + <configSetting altId="p207.gpio_speed.gpio_speed_high" configurationId="p207.gpio_drivecapacity"/> + <configSetting altId="p207.gpio_mode.gpio_mode_out.low" configurationId="p207.gpio_mode"/> + <configSetting altId="p208.trace0.tdata3" configurationId="p208"/> + <configSetting altId="p208.gpio_mode.gpio_mode_peripheral" configurationId="p208.gpio_mode"/> + <configSetting altId="p209.trace0.tdata2" configurationId="p209"/> + <configSetting altId="p209.gpio_mode.gpio_mode_peripheral" configurationId="p209.gpio_mode"/> + <configSetting altId="p210.trace0.tdata1" configurationId="p210"/> + <configSetting altId="p210.gpio_mode.gpio_mode_peripheral" configurationId="p210.gpio_mode"/> + <configSetting altId="p211.trace0.tdata0" configurationId="p211"/> + <configSetting altId="p211.gpio_mode.gpio_mode_peripheral" configurationId="p211.gpio_mode"/> + <configSetting altId="p212.cgc0.extal" configurationId="p212"/> + <configSetting altId="p212.gpio_mode.gpio_mode_peripheral" configurationId="p212.gpio_mode"/> + <configSetting altId="p213.cgc0.xtal" configurationId="p213"/> + <configSetting altId="p213.gpio_mode.gpio_mode_peripheral" configurationId="p213.gpio_mode"/> + <configSetting altId="p214.trace0.tclk" configurationId="p214"/> + <configSetting altId="p214.gpio_mode.gpio_mode_peripheral" configurationId="p214.gpio_mode"/> + <configSetting altId="p300.debug0.swclk" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + <configSetting altId="p301.spi0.ssl2" configurationId="p301"/> + <configSetting altId="p301.gpio_speed.gpio_speed_high" configurationId="p301.gpio_drivecapacity"/> + <configSetting altId="p301.gpio_mode.gpio_mode_peripheral" configurationId="p301.gpio_mode"/> + <configSetting altId="p302.spi0.ssl3" configurationId="p302"/> + <configSetting altId="p302.gpio_speed.gpio_speed_high" configurationId="p302.gpio_drivecapacity"/> + <configSetting altId="p302.gpio_mode.gpio_mode_peripheral" configurationId="p302.gpio_mode"/> + <configSetting altId="p303.output.low" configurationId="p303"/> + <configSetting altId="p303.gpio_speed.gpio_speed_high" configurationId="p303.gpio_drivecapacity"/> + <configSetting altId="p303.gpio_mode.gpio_mode_out.low" configurationId="p303.gpio_mode"/> + <configSetting altId="p305.qspi0.qspclk" configurationId="p305"/> + <configSetting altId="p305.gpio_speed.gpio_speed_high" configurationId="p305.gpio_drivecapacity"/> + <configSetting altId="p305.gpio_mode.gpio_mode_peripheral" configurationId="p305.gpio_mode"/> + <configSetting altId="p306.qspi0.qssl" configurationId="p306"/> + <configSetting altId="p306.gpio_speed.gpio_speed_high" configurationId="p306.gpio_drivecapacity"/> + <configSetting altId="p306.gpio_mode.gpio_mode_peripheral" configurationId="p306.gpio_mode"/> + <configSetting altId="p307.qspi0.qio0" configurationId="p307"/> + <configSetting altId="p307.gpio_speed.gpio_speed_high" configurationId="p307.gpio_drivecapacity"/> + <configSetting altId="p307.gpio_mode.gpio_mode_peripheral" configurationId="p307.gpio_mode"/> + <configSetting altId="p308.qspi0.qio1" configurationId="p308"/> + <configSetting altId="p308.gpio_speed.gpio_speed_high" configurationId="p308.gpio_drivecapacity"/> + <configSetting altId="p308.gpio_mode.gpio_mode_peripheral" configurationId="p308.gpio_mode"/> + <configSetting altId="p309.qspi0.qio2" configurationId="p309"/> + <configSetting altId="p309.gpio_speed.gpio_speed_high" configurationId="p309.gpio_drivecapacity"/> + <configSetting altId="p309.gpio_mode.gpio_mode_peripheral" configurationId="p309.gpio_mode"/> + <configSetting altId="p310.qspi0.qio3" configurationId="p310"/> + <configSetting altId="p310.gpio_speed.gpio_speed_high" configurationId="p310.gpio_drivecapacity"/> + <configSetting altId="p310.gpio_mode.gpio_mode_peripheral" configurationId="p310.gpio_mode"/> + <configSetting altId="p311.output.low" configurationId="p311"/> + <configSetting altId="p311.gpio_speed.gpio_speed_high" configurationId="p311.gpio_drivecapacity"/> + <configSetting altId="p311.gpio_mode.gpio_mode_out.low" configurationId="p311.gpio_mode"/> + <configSetting altId="p400.input" configurationId="p400"/> + <configSetting altId="p400.gpio_irq.gpio_irq_enabled" configurationId="p400.gpio_irq"/> + <configSetting altId="p400.gpio_mode.gpio_mode_in" configurationId="p400.gpio_mode"/> + <configSetting altId="p400.gpio_pupd.gpio_pupd_ip_up" configurationId="p400.gpio_pupd"/> + <configSetting altId="p401.etherc0.rmii.mdc" configurationId="p401"/> + <configSetting altId="p401.gpio_speed.gpio_speed_high" configurationId="p401.gpio_drivecapacity"/> + <configSetting altId="p401.gpio_mode.gpio_mode_peripheral" configurationId="p401.gpio_mode"/> + <configSetting altId="p402.etherc0.rmii.mdio" configurationId="p402"/> + <configSetting altId="p402.gpio_speed.gpio_speed_high" configurationId="p402.gpio_drivecapacity"/> + <configSetting altId="p402.gpio_mode.gpio_mode_peripheral" configurationId="p402.gpio_mode"/> + <configSetting altId="p403.output.high" configurationId="p403"/> + <configSetting altId="p403.gpio_speed.gpio_speed_high" configurationId="p403.gpio_drivecapacity"/> + <configSetting altId="p403.gpio_mode.gpio_mode_out.high" configurationId="p403.gpio_mode"/> + <configSetting altId="p404.output.low" configurationId="p404"/> + <configSetting altId="p404.gpio_speed.gpio_speed_high" configurationId="p404.gpio_drivecapacity"/> + <configSetting altId="p404.gpio_mode.gpio_mode_out.low" configurationId="p404.gpio_mode"/> + <configSetting altId="p405.etherc0.rmii.txd_en" configurationId="p405"/> + <configSetting altId="p405.gpio_speed.gpio_speed_high" configurationId="p405.gpio_drivecapacity"/> + <configSetting altId="p405.gpio_mode.gpio_mode_peripheral" configurationId="p405.gpio_mode"/> + <configSetting altId="p406.etherc0.rmii.txd1" configurationId="p406"/> + <configSetting altId="p406.gpio_speed.gpio_speed_high" configurationId="p406.gpio_drivecapacity"/> + <configSetting altId="p406.gpio_mode.gpio_mode_peripheral" configurationId="p406.gpio_mode"/> + <configSetting altId="p407.usbfs0.vbus" configurationId="p407"/> + <configSetting altId="p407.gpio_speed.gpio_speed_high" configurationId="p407.gpio_drivecapacity"/> + <configSetting altId="p407.gpio_mode.gpio_mode_peripheral" configurationId="p407.gpio_mode"/> + <configSetting altId="p408.output.low" configurationId="p408"/> + <configSetting altId="p408.gpio_speed.gpio_speed_high" configurationId="p408.gpio_drivecapacity"/> + <configSetting altId="p408.gpio_mode.gpio_mode_out.low" configurationId="p408.gpio_mode"/> + <configSetting altId="p409.input" configurationId="p409"/> + <configSetting altId="p409.gpio_irq.gpio_irq_enabled" configurationId="p409.gpio_irq"/> + <configSetting altId="p409.gpio_mode.gpio_mode_in" configurationId="p409.gpio_mode"/> + <configSetting altId="p409.gpio_pupd.gpio_pupd_ip_up" configurationId="p409.gpio_pupd"/> + <configSetting altId="p410.spi1.miso" configurationId="p410"/> + <configSetting altId="p410.gpio_speed.gpio_speed_high" configurationId="p410.gpio_drivecapacity"/> + <configSetting altId="p410.gpio_mode.gpio_mode_peripheral" configurationId="p410.gpio_mode"/> + <configSetting altId="p411.spi1.mosi" configurationId="p411"/> + <configSetting altId="p411.gpio_speed.gpio_speed_high" configurationId="p411.gpio_drivecapacity"/> + <configSetting altId="p411.gpio_mode.gpio_mode_peripheral" configurationId="p411.gpio_mode"/> + <configSetting altId="p412.spi1.rspck" configurationId="p412"/> + <configSetting altId="p412.gpio_speed.gpio_speed_high" configurationId="p412.gpio_drivecapacity"/> + <configSetting altId="p412.gpio_mode.gpio_mode_peripheral" configurationId="p412.gpio_mode"/> + <configSetting altId="p413.spi1.ssl0" configurationId="p413"/> + <configSetting altId="p413.gpio_speed.gpio_speed_high" configurationId="p413.gpio_drivecapacity"/> + <configSetting altId="p413.gpio_mode.gpio_mode_peripheral" configurationId="p413.gpio_mode"/> + <configSetting altId="p414.iic2.sda" configurationId="p414"/> + <configSetting altId="p414.gpio_speed.gpio_speed_high" configurationId="p414.gpio_drivecapacity"/> + <configSetting altId="p414.gpio_mode.gpio_mode_peripheral" configurationId="p414.gpio_mode"/> + <configSetting altId="p415.iic2.scl" configurationId="p415"/> + <configSetting altId="p415.gpio_speed.gpio_speed_high" configurationId="p415.gpio_drivecapacity"/> + <configSetting altId="p415.gpio_mode.gpio_mode_peripheral" configurationId="p415.gpio_mode"/> + <configSetting altId="p500.usbfs0.vbusen" configurationId="p500"/> + <configSetting altId="p500.gpio_speed.gpio_speed_high" configurationId="p500.gpio_drivecapacity"/> + <configSetting altId="p500.gpio_mode.gpio_mode_peripheral" configurationId="p500.gpio_mode"/> + <configSetting altId="p501.usbfs0.ovrcura" configurationId="p501"/> + <configSetting altId="p501.gpio_speed.gpio_speed_high" configurationId="p501.gpio_drivecapacity"/> + <configSetting altId="p501.gpio_mode.gpio_mode_peripheral" configurationId="p501.gpio_mode"/> + <configSetting altId="p505.sci6.scl" configurationId="p505"/> + <configSetting altId="p505.gpio_speed.gpio_speed_high" configurationId="p505.gpio_drivecapacity"/> + <configSetting altId="p505.gpio_mode.gpio_mode_peripheral" configurationId="p505.gpio_mode"/> + <configSetting altId="p505.gpio_otype.gpio_otype_n_ch_od" configurationId="p505.gpio_otype"/> + <configSetting altId="p506.sci6.sda" configurationId="p506"/> + <configSetting altId="p506.gpio_speed.gpio_speed_high" configurationId="p506.gpio_drivecapacity"/> + <configSetting altId="p506.gpio_mode.gpio_mode_peripheral" configurationId="p506.gpio_mode"/> + <configSetting altId="p506.gpio_otype.gpio_otype_n_ch_od" configurationId="p506.gpio_otype"/> + <configSetting altId="p511.iic1.sda" configurationId="p511"/> + <configSetting altId="p511.gpio_speed.gpio_speed_high" configurationId="p511.gpio_drivecapacity"/> + <configSetting altId="p511.gpio_mode.gpio_mode_peripheral" configurationId="p511.gpio_mode"/> + <configSetting altId="p512.iic1.scl" configurationId="p512"/> + <configSetting altId="p512.gpio_speed.gpio_speed_high" configurationId="p512.gpio_drivecapacity"/> + <configSetting altId="p512.gpio_mode.gpio_mode_peripheral" configurationId="p512.gpio_mode"/> + <configSetting altId="p600.ospi0.omsio4" configurationId="p600"/> + <configSetting altId="p600.gpio_speed.gpio_speed_highspeedhigh" configurationId="p600.gpio_drivecapacity"/> + <configSetting altId="p600.gpio_mode.gpio_mode_peripheral" configurationId="p600.gpio_mode"/> + <configSetting altId="p601.ospi0.omsio2" configurationId="p601"/> + <configSetting altId="p601.gpio_speed.gpio_speed_highspeedhigh" configurationId="p601.gpio_drivecapacity"/> + <configSetting altId="p601.gpio_mode.gpio_mode_peripheral" configurationId="p601.gpio_mode"/> + <configSetting altId="p602.ospi0.omcs1" configurationId="p602"/> + <configSetting altId="p602.gpio_mode.gpio_mode_peripheral" configurationId="p602.gpio_mode"/> + <configSetting altId="p608.output.low" configurationId="p608"/> + <configSetting altId="p608.gpio_speed.gpio_speed_high" configurationId="p608.gpio_drivecapacity"/> + <configSetting altId="p608.gpio_mode.gpio_mode_out.low" configurationId="p608.gpio_mode"/> + <configSetting altId="p609.can1.ctx" configurationId="p609"/> + <configSetting altId="p609.gpio_mode.gpio_mode_peripheral" configurationId="p609.gpio_mode"/> + <configSetting altId="p610.can1.crx" configurationId="p610"/> + <configSetting altId="p610.gpio_mode.gpio_mode_peripheral" configurationId="p610.gpio_mode"/> + <configSetting altId="p611.output.low" configurationId="p611"/> + <configSetting altId="p611.gpio_speed.gpio_speed_high" configurationId="p611.gpio_drivecapacity"/> + <configSetting altId="p611.gpio_mode.gpio_mode_out.low" configurationId="p611.gpio_mode"/> + <configSetting altId="p613.sci7.txd" configurationId="p613"/> + <configSetting altId="p613.gpio_mode.gpio_mode_peripheral" configurationId="p613.gpio_mode"/> + <configSetting altId="p614.sci7.rxd" configurationId="p614"/> + <configSetting altId="p614.gpio_mode.gpio_mode_peripheral" configurationId="p614.gpio_mode"/> + <configSetting altId="p615.output.high" configurationId="p615"/> + <configSetting altId="p615.gpio_speed.gpio_speed_medium" configurationId="p615.gpio_drivecapacity"/> + <configSetting altId="p615.gpio_mode.gpio_mode_out.high" configurationId="p615.gpio_mode"/> + <configSetting altId="p700.etherc0.rmii.txd0" configurationId="p700"/> + <configSetting altId="p700.gpio_speed.gpio_speed_high" configurationId="p700.gpio_drivecapacity"/> + <configSetting altId="p700.gpio_mode.gpio_mode_peripheral" configurationId="p700.gpio_mode"/> + <configSetting altId="p701.etherc0.rmii.ref50ck" configurationId="p701"/> + <configSetting altId="p701.gpio_speed.gpio_speed_high" configurationId="p701.gpio_drivecapacity"/> + <configSetting altId="p701.gpio_mode.gpio_mode_peripheral" configurationId="p701.gpio_mode"/> + <configSetting altId="p702.etherc0.rmii.rxd0" configurationId="p702"/> + <configSetting altId="p702.gpio_speed.gpio_speed_high" configurationId="p702.gpio_drivecapacity"/> + <configSetting altId="p702.gpio_mode.gpio_mode_peripheral" configurationId="p702.gpio_mode"/> + <configSetting altId="p703.etherc0.rmii.rxd1" configurationId="p703"/> + <configSetting altId="p703.gpio_speed.gpio_speed_high" configurationId="p703.gpio_drivecapacity"/> + <configSetting altId="p703.gpio_mode.gpio_mode_peripheral" configurationId="p703.gpio_mode"/> + <configSetting altId="p704.etherc0.rmii.rx_er" configurationId="p704"/> + <configSetting altId="p704.gpio_speed.gpio_speed_high" configurationId="p704.gpio_drivecapacity"/> + <configSetting altId="p704.gpio_mode.gpio_mode_peripheral" configurationId="p704.gpio_mode"/> + <configSetting altId="p705.etherc0.rmii.crs_dv" configurationId="p705"/> + <configSetting altId="p705.gpio_speed.gpio_speed_high" configurationId="p705.gpio_drivecapacity"/> + <configSetting altId="p705.gpio_mode.gpio_mode_peripheral" configurationId="p705.gpio_mode"/> + <configSetting altId="p706.input" configurationId="p706"/> + <configSetting altId="p706.gpio_irq.gpio_irq_enabled" configurationId="p706.gpio_irq"/> + <configSetting altId="p706.gpio_mode.gpio_mode_in" configurationId="p706.gpio_mode"/> + <configSetting altId="p707.usbhs0.ovrcura" configurationId="p707"/> + <configSetting altId="p707.gpio_mode.gpio_mode_peripheral" configurationId="p707.gpio_mode"/> + <configSetting altId="p708.spi1.ssl3" configurationId="p708"/> + <configSetting altId="p708.gpio_speed.gpio_speed_high" configurationId="p708.gpio_drivecapacity"/> + <configSetting altId="p708.gpio_mode.gpio_mode_peripheral" configurationId="p708.gpio_mode"/> + <configSetting altId="p905.input" configurationId="p905"/> + <configSetting altId="p905.gpio_irq.gpio_irq_enabled" configurationId="p905.gpio_irq"/> + <configSetting altId="p905.gpio_mode.gpio_mode_in" configurationId="p905.gpio_mode"/> + <configSetting altId="p905.gpio_pupd.gpio_pupd_ip_up" configurationId="p905.gpio_pupd"/> + <configSetting altId="pb00.usbhs0.vbusen" configurationId="pb00"/> + <configSetting altId="pb00.gpio_speed.gpio_speed_high" configurationId="pb00.gpio_drivecapacity"/> + <configSetting altId="pb00.gpio_mode.gpio_mode_peripheral" configurationId="pb00.gpio_mode"/> + <configSetting altId="pb01.usbhs0.vbus" configurationId="pb01"/> + <configSetting altId="pb01.gpio_speed.gpio_speed_high" configurationId="pb01.gpio_drivecapacity"/> + <configSetting altId="pb01.gpio_mode.gpio_mode_peripheral" configurationId="pb01.gpio_mode"/> + <configSetting altId="qspi0.mode.quad.free" configurationId="qspi0.mode"/> + <configSetting altId="qspi0.pairing.free" configurationId="qspi0.pairing"/> + <configSetting altId="qspi0.qio0.p307" configurationId="qspi0.qio0"/> + <configSetting altId="qspi0.qio1.p308" configurationId="qspi0.qio1"/> + <configSetting altId="qspi0.qio2.p309" configurationId="qspi0.qio2"/> + <configSetting altId="qspi0.qio3.p310" configurationId="qspi0.qio3"/> + <configSetting altId="qspi0.qspclk.p305" configurationId="qspi0.qspclk"/> + <configSetting altId="qspi0.qssl.p306" configurationId="qspi0.qssl"/> + <configSetting altId="sci6.mode.iic.free" configurationId="sci6.mode"/> + <configSetting altId="sci6.scl.p505" configurationId="sci6.scl"/> + <configSetting altId="sci6.sda.p506" configurationId="sci6.sda"/> + <configSetting altId="sci7.mode.asynchronous.free" configurationId="sci7.mode"/> + <configSetting altId="sci7.rxd.p614" configurationId="sci7.rxd"/> + <configSetting altId="sci7.txd.p613" configurationId="sci7.txd"/> + <configSetting altId="spi0.miso.p202" configurationId="spi0.miso"/> + <configSetting altId="spi0.mode.custom.free" configurationId="spi0.mode"/> + <configSetting altId="spi0.mosi.p203" configurationId="spi0.mosi"/> + <configSetting altId="spi0.pairing.free" configurationId="spi0.pairing"/> + <configSetting altId="spi0.rspck.p204" configurationId="spi0.rspck"/> + <configSetting altId="spi0.ssl0.p205" configurationId="spi0.ssl0"/> + <configSetting altId="spi0.ssl1.p206" configurationId="spi0.ssl1"/> + <configSetting altId="spi0.ssl2.p301" configurationId="spi0.ssl2"/> + <configSetting altId="spi0.ssl3.p302" configurationId="spi0.ssl3"/> + <configSetting altId="spi1.miso.p410" configurationId="spi1.miso"/> + <configSetting altId="spi1.mode.enabled.free" configurationId="spi1.mode"/> + <configSetting altId="spi1.mosi.p411" configurationId="spi1.mosi"/> + <configSetting altId="spi1.pairing.free" configurationId="spi1.pairing"/> + <configSetting altId="spi1.rspck.p412" configurationId="spi1.rspck"/> + <configSetting altId="spi1.ssl0.p413" configurationId="spi1.ssl0"/> + <configSetting altId="spi1.ssl3.p708" configurationId="spi1.ssl3"/> + <configSetting altId="trace0.mode.trace4bit" configurationId="trace0.mode"/> + <configSetting altId="trace0.tclk.p214" configurationId="trace0.tclk"/> + <configSetting altId="trace0.tdata0.p211" configurationId="trace0.tdata0"/> + <configSetting altId="trace0.tdata1.p210" configurationId="trace0.tdata1"/> + <configSetting altId="trace0.tdata2.p209" configurationId="trace0.tdata2"/> + <configSetting altId="trace0.tdata3.p208" configurationId="trace0.tdata3"/> + <configSetting altId="usbfs0.mode.custom" configurationId="usbfs0.mode"/> + <configSetting altId="usbfs0.ovrcura.p501" configurationId="usbfs0.ovrcura"/> + <configSetting altId="usbfs0.vbus.p407" configurationId="usbfs0.vbus"/> + <configSetting altId="usbfs0.vbusen.p500" configurationId="usbfs0.vbusen"/> + <configSetting altId="usbhs0.mode.custom" configurationId="usbhs0.mode"/> + <configSetting altId="usbhs0.ovrcura.p707" configurationId="usbhs0.ovrcura"/> + <configSetting altId="usbhs0.vbus.pb01" configurationId="usbhs0.vbus"/> + <configSetting altId="usbhs0.vbusen.pb00" configurationId="usbhs0.vbusen"/> + </pincfg> + <pincfg active="false" name="R7FA6M5BH3CFC.pincfg" selected="false" symbol=""> + <configSetting altId="debug0.mode.swd" configurationId="debug0.mode"/> + <configSetting altId="debug0.swclk.p300" configurationId="debug0.swclk"/> + <configSetting altId="debug0.swdio.p108" configurationId="debug0.swdio"/> + <configSetting altId="p108.debug0.swdio" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p300.debug0.swclk" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + </pincfg> + </raPinConfiguration> +</raConfiguration> diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.cmake b/hw/bsp/ra/boards/ra8m1_ek/board.cmake new file mode 100644 index 000000000..9c797c3b7 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/board.cmake @@ -0,0 +1,16 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m85 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra8m1) + +set(JLINK_DEVICE R7FA8M1AH) +#set(JLINK_OPTION "-USB 001083115236") + +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif() + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.h b/hw/bsp/ra/boards/ra8m1_ek/board.h new file mode 100644 index 000000000..33dda99b4 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/board.h @@ -0,0 +1,42 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED_STATE_ON 1 +#define BUTTON_STATE_ACTIVE 0 + + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.mk b/hw/bsp/ra/boards/ra8m1_ek/board.mk new file mode 100644 index 000000000..2e56b3781 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/board.mk @@ -0,0 +1,11 @@ +CPU_CORE = cortex-m85 +MCU_VARIANT = ra8m1 + +# For flash-jlink target +JLINK_DEVICE = R7FA8M1AH + +# Port 1 is highspeed +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra8m1_ek/ozone/Renesas_RA8_TracePins.pex b/hw/bsp/ra/boards/ra8m1_ek/ozone/Renesas_RA8_TracePins.pex Binary files differnew file mode 100644 index 000000000..70dd323ec --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ozone/Renesas_RA8_TracePins.pex diff --git a/hw/bsp/ra/boards/ra8m1_ek/ozone/ra8m1.jdebug b/hw/bsp/ra/boards/ra8m1_ek/ozone/ra8m1.jdebug new file mode 100644 index 000000000..242a15db9 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ozone/ra8m1.jdebug @@ -0,0 +1,231 @@ + +/********************************************************************* +* +* OnProjectLoad +* +* Function description +* Project load routine. Required. +* +********************************************************************** +*/ +void OnProjectLoad (void) { + Project.SetTraceSource ("Trace Pins"); + Project.SetDevice ("R7FA8M1AH"); + Project.SetHostIF ("USB", ""); + Project.SetTargetIF ("SWD"); + Project.SetTIFSpeed ("50 MHz"); + + Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M85F.svd"); + Project.AddSvdFile ("../../../../../../../cmsis-svd-data/data/Renesas/R7FA6M5BH.svd"); + + File.Open ("../../../../../../examples/cmake-build-ra8m1_ek/device/cdc_msc/cdc_msc.elf"); +} +/********************************************************************* +* +* BeforeTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +void BeforeTargetConnect (void) { + // Trace pin init is done by J-Link script file as J-Link script files are IDE independent + //Project.SetJLinkScript("../../../debug.jlinkscript"); + Project.SetJLinkScript ("$(ProjectDir)/Renesas_RA8_TracePins.pex"); +} + +/********************************************************************* +* +* AfterTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetConnect (void) { +//} + +/********************************************************************* +* +* TargetDownload +* +* Function description +* Replaces the default program download routine. Optional. +* +********************************************************************** +*/ +//void TargetDownload (void) { +//} + +/********************************************************************* +* +* BeforeTargetDownload +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDownload (void) { +//} + +/********************************************************************* +* +* AfterTargetDownload +* +* Function description +* Event handler routine. Optional. +* The default implementation initializes SP and PC to reset values. +* +********************************************************************** +*/ +void AfterTargetDownload (void) { + _SetupTarget(); +} + +/********************************************************************* +* +* BeforeTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetHalt +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetHalt (void) { +//} + +/********************************************************************* +* +* BeforeTargetResume +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetResume (void) { +//} + +/********************************************************************* +* +* OnSnapshotLoad +* +* Function description +* Called upon loading a snapshot. Optional. +* +* Additional information +* This function is used to restore the target state in cases +* where values cannot simply be written to the target. +* Typical use: GPIO clock needs to be enabled, before +* GPIO is configured. +* +********************************************************************** +*/ +//void OnSnapshotLoad (void) { +//} + +/********************************************************************* +* +* OnSnapshotSave +* +* Function description +* Called upon saving a snapshot. Optional. +* +* Additional information +* This function is usually used to save values of the target +* state which can either not be trivially read, +* or need to be restored in a specific way or order. +* Typically use: Memory Mapped Registers, +* such as PLL and GPIO configuration. +* +********************************************************************** +*/ +//void OnSnapshotSave (void) { +//} + +/********************************************************************* +* +* OnError +* +* Function description +* Called when an error occurred. Optional. +* +********************************************************************** +*/ +//void OnError (void) { +//} + +/********************************************************************* +* +* AfterProjectLoad +* +* Function description +* After Project load routine. Optional. +* +********************************************************************** +*/ +//void AfterProjectLoad (void) { +//} + +/********************************************************************* +* +* _SetupTarget +* +* Function description +* Setup the target. +* Called by AfterTargetReset() and AfterTargetDownload(). +* +* Auto-generated function. May be overridden by Ozone. +* +********************************************************************** +*/ +void _SetupTarget(void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + VectorTableAddr = Elf.GetBaseAddr(); + // + // Set up initial stack pointer + // + SP = Target.ReadU32(VectorTableAddr); + if (SP != 0xFFFFFFFF) { + Target.SetReg("SP", SP); + } + // + // Set up entry point PC + // + PC = Elf.GetEntryPointPC(); + if (PC != 0xFFFFFFFF) { + Target.SetReg("PC", PC); + } else { + Util.Error("Project script error: failed to set up entry point PC", 1); + } +} diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..90afbdef3 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x1000) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..92e7ddcdb --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (8) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..a22da075d --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA8M1AHECBD + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (2064384) + #define BSP_RAM_SIZE_BYTES (917504) + #define BSP_DATA_FLASH_SIZE_BYTES (12288) + #define BSP_PACKAGE_BGA + #define BSP_PACKAGE_PINS (224) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..94f09c61f --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,526 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra8m1/bsp_override.h" + #include "../../../ra/fsp/src/bsp/mcu/ra8m1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA8M1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (0) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 7 + #define BSP_HOCO_HZ (48000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + + #define BSP_CFG_FLL_ENABLE (0) + + #define BSP_CFG_CLOCK_SETTLING_DELAY_ENABLE (1) + #define BSP_CFG_SLEEP_MODE_DELAY_ENABLE (1) + #define BSP_CFG_MSTP_CHANGE_DELAY_ENABLE (1) + #define BSP_CFG_RTOS_IDLE_SLEEP (0) + #define BSP_CFG_CLOCK_SETTLING_DELAY_US (150) + + #if defined(BSP_PACKAGE_LQFP) && (BSP_PACKAGE_PINS == 100) + #define BSP_MAX_CLOCK_CHANGE_THRESHOLD (180000000U) + #elif defined(BSP_PACKAGE_LQFP) + #define BSP_MAX_CLOCK_CHANGE_THRESHOLD (200000000U) + #else + #define BSP_MAX_CLOCK_CHANGE_THRESHOLD (240000000U) + #endif + + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) + + #if defined(_RA_TZ_SECURE) + #define BSP_TZ_SECURE_BUILD (1) + #define BSP_TZ_NONSECURE_BUILD (0) + #elif defined(_RA_TZ_NONSECURE) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (1) + #else + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (0) + #endif + + /* TrustZone Settings */ + #define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) + #define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) + #define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + + /* CMSIS TrustZone Settings */ + #define SCB_CSR_AIRCR_INIT (1) + #define SCB_AIRCR_BFHFNMINS_VAL (0) + #define SCB_AIRCR_SYSRESETREQS_VAL (1) + #define SCB_AIRCR_PRIS_VAL (0) + #define TZ_FPU_NS_USAGE (1) +#ifndef SCB_NSACR_CP10_11_VAL + #define SCB_NSACR_CP10_11_VAL (3U) +#endif + +#ifndef FPU_FPCCR_TS_VAL + #define FPU_FPCCR_TS_VAL (1U) +#endif + #define FPU_FPCCR_CLRONRETS_VAL (1) + +#ifndef FPU_FPCCR_CLRONRET_VAL + #define FPU_FPCCR_CLRONRET_VAL (1) +#endif + + /* Type 1 Peripheral Security Attribution */ + + /* Peripheral Security Attribution Register (PSAR) Settings */ +#ifndef BSP_TZ_CFG_PSARB +#define BSP_TZ_CFG_PSARB (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4) /* I3C */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* USBHS */ | \ + (1 << 15) /* ETHERC/EDMAC */ | \ + (1 << 16) /* OSPI */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */) +#endif +#ifndef BSP_TZ_CFG_PSARC +#define BSP_TZ_CFG_PSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7) /* SSIE1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* SDHI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* CEU */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* CANFD1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* CANFD0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* RSIP-E51A */) +#endif +#ifndef BSP_TZ_CFG_PSARD +#define BSP_TZ_CFG_PSARD (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4) /* AGT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5) /* AGT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC121 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC120 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC120 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* ACMPHS1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* ACMPHS0 */) +#endif +#ifndef BSP_TZ_CFG_PSARE +#define BSP_TZ_CFG_PSARE (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* WDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* IWDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* RTC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* ULPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* ULPT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* GPT13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* GPT12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* GPT11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 21) /* GPT10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */) +#endif +#ifndef BSP_TZ_CFG_MSSAR +#define BSP_TZ_CFG_MSSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* DTC_DMAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* ELC */) +#endif + + /* Type 2 Peripheral Security Attribution */ + + /* Security attribution for RSTSRn registers. */ +#ifndef BSP_TZ_CFG_RSTSAR +#define BSP_TZ_CFG_RSTSAR (0x00000007U) +#endif + + /* Security attribution for registers of LVD channels. */ +#ifndef BSP_TZ_CFG_LVDSAR + /* The LVD driver needs to access both channels. This means that the security attribution for both channels must be the same. */ +#if (RA_NOT_DEFINED > 0) || (RA_NOT_DEFINED > 0) +#define BSP_TZ_CFG_LVDSAR (0U) +#else +#define BSP_TZ_CFG_LVDSAR (3U) +#endif +#endif + + /* Security attribution for LPM registers. + * - OPCCR based on clock security. + * - Set remaining registers based on LPM security. + */ +#ifndef BSP_TZ_CFG_LPMSAR +#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? BSP_CFG_CLOCKS_SECURE == 0 : (\ + 0x002E0106U | \ + (BSP_CFG_CLOCKS_SECURE == 0))) +#endif + /* Deep Standby Interrupt Factor Security Attribution Register. */ +#ifndef BSP_TZ_CFG_DPFSAR +#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0U : 0xAF1FFFFFU) +#endif + /* RAM Standby Control Security Attribution Register. */ +#ifndef BSP_TZ_CFG_RSCSAR +#define BSP_TZ_CFG_RSCSAR ((RA_NOT_DEFINED > 0) ? 0U : 0x00037FFFU) +#endif + + /* Security attribution for CGC registers. */ +#ifndef BSP_TZ_CFG_CGFSAR +#if BSP_CFG_CLOCKS_SECURE +/* Protect all CGC registers from Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0U) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0x047F3BFDU) +#endif +#endif + + /* Security attribution for Battery Backup registers. */ +#ifndef BSP_TZ_CFG_BBFSAR +#if 0 +#define BSP_TZ_CFG_BBFSAR (0U) +#else +#define BSP_TZ_CFG_BBFSAR (0x1FU) +#endif +#endif + + /* Security attribution for Battery Backup registers (VBTBKRn). */ +#ifndef BSP_TZ_CFG_VBRSABAR +#if 0 +#define BSP_TZ_CFG_VBRSABAR (0xFFE0) +#else +#define BSP_TZ_CFG_VBRSABAR (0xED00) +#endif +#endif + + /* Security attribution for registers for IRQ channels. */ +#ifndef BSP_TZ_CFG_ICUSARA +#define BSP_TZ_CFG_ICUSARA (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */) +#endif + + /* Security attribution for NMI registers. */ +#ifndef BSP_TZ_CFG_ICUSARB +#define BSP_TZ_CFG_ICUSARB (0 | 0U) /* Should match AIRCR.BFHFNMINS. */ +#endif + + /* Security attribution for registers for DMAC channels */ +#ifndef BSP_TZ_CFG_DMACCHSAR +#define BSP_TZ_CFG_DMACCHSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */) +#endif + + /* Security attribution registers for WUPEN0. */ +#ifndef BSP_TZ_CFG_ICUSARE +#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0U : 0xFF1D0000U) +#endif + + /* Security attribution registers for WUPEN1. */ +#ifndef BSP_TZ_CFG_ICUSARF +#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0U : 0x00007F08U) +#endif + + /* Trusted Event Route Control Register for IELSR, DMAC.DELSR and ELC.ELSR. Note that currently Trusted Event Route Control is not supported. */ +#ifndef BSP_TZ_CFG_TEVTRCR +#define BSP_TZ_CFG_TEVTRCR (0) +#endif + + /* Security attribution register for ELCR, ELSEGR0, ELSEGR1 Security Attribution. */ +#ifndef BSP_TZ_CFG_ELCSARA + #define BSP_TZ_CFG_ELCSARA (0x00000007U) +#endif + + /* Set DTCSTSAR if the Secure program uses the DTC. */ +#if RA_NOT_DEFINED == RA_NOT_DEFINED + #define BSP_TZ_CFG_DTC_USED (0U) +#else + #define BSP_TZ_CFG_DTC_USED (1U) +#endif + + /* Security attribution of FLWT and FCKMHZ registers. */ +#ifndef BSP_TZ_CFG_FSAR +/* If the CGC registers are only accessible in Secure mode, than there is no + * reason for nonsecure applications to access FLWT and FCKMHZ. */ +#define BSP_TZ_CFG_FSAR (\ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 0) : 0U) | /* FLWTSA */\ + ((RA_NOT_DEFINED) > 0 ? 0U: (1U << 1)) | /* FCACHESA */\ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 8) : 0U) | /* FCKMHZSA */ \ + ((RA_NOT_DEFINED) > 0 ? 0U : (1U << 9U)) | /* FACICMISA */\ + ((RA_NOT_DEFINED) > 0 ? 0U: (1U << 10U)) /* FACICMRSA */) +#endif + + /* Security attribution for SRAM registers. */ +#ifndef BSP_TZ_CFG_SRAMSAR +/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access + * SRAM0WTEN and therefore there is no reason to access PRCR2. */ + #define BSP_TZ_CFG_SRAMSAR (\ + ((1U) << 0U) | /* SRAMSA0 */\ + ((1U) << 1U) | /* SRAMSA1 */\ + ((1U) << 7U) | /* STBRAMSA */\ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 8U) : 0U) /* SRAMWTSA */) +#endif + + /* Security attribution for the DMAC Bus Master MPU settings. */ +#ifndef BSP_TZ_CFG_MMPUSARA + /* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ + #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_DMACCHSAR) +#endif + + /* Security Attribution Register A for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARA + #define BSP_TZ_CFG_BUSSARA (1U) +#endif + /* Security Attribution Register B for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARB + #define BSP_TZ_CFG_BUSSARB (1U) +#endif + /* Security Attribution Register C for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARC + #define BSP_TZ_CFG_BUSSARC (1U) +#endif + + /* Enable Uninitialized Non-Secure Application Fallback. */ +#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK + #define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) +#endif + + + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + + #define BSP_CFG_ROM_REG_OFS2 ((1 << 0) | 0xFFFFFFFEU) + + /* Option Function Select Register 1 Security Attribution */ +#ifndef BSP_CFG_ROM_REG_OFS1_SEL +#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) + #define BSP_CFG_ROM_REG_OFS1_SEL (0x00000000U | ((0U << 0U)) | ((0U << 3U)) | ((0U << 5U)) | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0xF00U : 0U) | ((0U << 24U)) | ((0U << 25U))) +#else + #define BSP_CFG_ROM_REG_OFS1_SEL (0x00000000U) +#endif +#endif + #define BSP_CFG_ROM_REG_OFS1_INITECCEN (0 << 25) + #define BSP_CFG_ROM_REG_OFS1 (0xFCFFFED0 | (1 << 3) | (7) | (1 << 5) | (1 << 8) | (1 << 24) | (BSP_CFG_ROM_REG_OFS1_INITECCEN)) + + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + + /* Dual Mode Select Register */ +#ifndef BSP_CFG_ROM_REG_DUALSEL + #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) +#endif + + /* Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_BPS0 + #define BSP_CFG_ROM_REG_BPS0 (~( 0U)) +#endif + /* Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_BPS1 + #define BSP_CFG_ROM_REG_BPS1 (~( 0U)) +#endif + /* Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_BPS2 + #define BSP_CFG_ROM_REG_BPS2 (~( 0U)) +#endif + /* Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_BPS3 + #define BSP_CFG_ROM_REG_BPS3 (~( 0U)) +#endif + /* Permanent Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_PBPS0 + #define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) +#endif + /* Permanent Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_PBPS1 + #define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) +#endif + /* Permanent Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_PBPS2 + #define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) +#endif + /* Permanent Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_PBPS3 + #define BSP_CFG_ROM_REG_PBPS3 (~( 0U)) +#endif + /* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL0 + #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) +#endif + /* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL1 + #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) +#endif + /* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL2 + #define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) +#endif + /* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL3 + #define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif + /* Security Attribution for Bank Select Register */ +#ifndef BSP_CFG_ROM_REG_BANKSEL_SEL + #define BSP_CFG_ROM_REG_BANKSEL_SEL (0xFFFFFFFFU) +#endif +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif + + /* FSBL Control Register 0 */ +#ifndef BSP_CFG_ROM_REG_FSBLCTRL0 +#define BSP_CFG_ROM_REG_FSBLCTRL0 ( \ + (7 << R_OFS_DATAFLASH_FSBLCTRL0_FSBLEN_Pos) | \ + (7 << R_OFS_DATAFLASH_FSBLCTRL0_FSBLSKIPSW_Pos) | \ + (7 << R_OFS_DATAFLASH_FSBLCTRL0_FSBLSKIPDS_Pos) | \ + (7 << R_OFS_DATAFLASH_FSBLCTRL0_FSBLCLK_Pos) | \ + 0xFFFFF000) +#endif + + /* FSBL Control Register 1 */ +#ifndef BSP_CFG_ROM_REG_FSBLCTRL1 +#define BSP_CFG_ROM_REG_FSBLCTRL1 ( \ + (3 << R_OFS_DATAFLASH_FSBLCTRL1_FSBLEXMD_Pos) | \ + 0xFFFFFFFC) +#endif + + /* FSBL Control Register 2 */ +#ifndef BSP_CFG_ROM_REG_FSBLCTRL2 +#define BSP_CFG_ROM_REG_FSBLCTRL2 ( \ + (15 << R_OFS_DATAFLASH_FSBLCTRL2_PORTPN_Pos) | \ + (0x1F << R_OFS_DATAFLASH_FSBLCTRL2_PORTGN_Pos) | \ + 0xFFFFFE00) +#endif + + /* Start Address of Code Certificate Register 0 */ +#ifndef BSP_CFG_ROM_REG_SACC0 +#define BSP_CFG_ROM_REG_SACC0 (0xFFFFFFFF) +#endif + + /* Start Address of Code Certificate Register 1 */ +#ifndef BSP_CFG_ROM_REG_SACC1 +#define BSP_CFG_ROM_REG_SACC1 (0xFFFFFFFF) +#endif + + /* Start Address of Measurement Report Register */ +#ifndef BSP_CFG_ROM_REG_SAMR +#define BSP_CFG_ROM_REG_SAMR (0xFFFFFFFF) +#endif + +#ifndef BSP_CFG_DCACHE_ENABLED +#define BSP_CFG_DCACHE_ENABLED (0) +#endif + + +#ifndef BSP_CFG_SDRAM_ENABLED + #define BSP_CFG_SDRAM_ENABLED (0) +#endif + +#ifndef BSP_CFG_SDRAM_TRAS + #define BSP_CFG_SDRAM_TRAS (6) +#endif + +#ifndef BSP_CFG_SDRAM_TRCD + #define BSP_CFG_SDRAM_TRCD (3) +#endif + +#ifndef BSP_CFG_SDRAM_TRP + #define BSP_CFG_SDRAM_TRP (3) +#endif + +#ifndef BSP_CFG_SDRAM_TWR + #define BSP_CFG_SDRAM_TWR (2) +#endif + +#ifndef BSP_CFG_SDRAM_TCL + #define BSP_CFG_SDRAM_TCL (3) +#endif + +#ifndef BSP_CFG_SDRAM_TRFC + #define BSP_CFG_SDRAM_TRFC (937) +#endif + +#ifndef BSP_CFG_SDRAM_TREFW + #define BSP_CFG_SDRAM_TREFW (8) +#endif + +#ifndef BSP_CFG_SDRAM_INIT_ARFI + #define BSP_CFG_SDRAM_INIT_ARFI (10) +#endif + +#ifndef BSP_CFG_SDRAM_INIT_ARFC + #define BSP_CFG_SDRAM_INIT_ARFC (8) +#endif + +#ifndef BSP_CFG_SDRAM_INIT_PRC + #define BSP_CFG_SDRAM_INIT_PRC (3) +#endif + +#ifndef BSP_CFG_SDRAM_MULTIPLEX_ADDR_SHIFT + #define BSP_CFG_SDRAM_MULTIPLEX_ADDR_SHIFT (1) +#endif + +#ifndef BSP_CFG_SDRAM_ENDIAN_MODE + #define BSP_CFG_SDRAM_ENDIAN_MODE (0) +#endif + +#ifndef BSP_CFG_SDRAM_ACCESS_MODE + #define BSP_CFG_SDRAM_ACCESS_MODE (1) +#endif + +#ifndef BSP_CFG_SDRAM_BUS_WIDTH + #define BSP_CFG_SDRAM_BUS_WIDTH (0) +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..883363437 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,127 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define ENET_RMII_INT (BSP_IO_PORT_00_PIN_00) +#define ARDUINO_A3 (BSP_IO_PORT_00_PIN_01) +#define GROVE2_AN102 (BSP_IO_PORT_00_PIN_02) +#define ARDUINO_A1 (BSP_IO_PORT_00_PIN_03) +#define ARDUINO_A0_MIKROBUS_AN000 (BSP_IO_PORT_00_PIN_04) +#define GROVE2_AN001 (BSP_IO_PORT_00_PIN_05) +#define PMOD1_IRQ11 (BSP_IO_PORT_00_PIN_06) +#define ARDUINO_A004 (BSP_IO_PORT_00_PIN_07) +#define USER_S2 (BSP_IO_PORT_00_PIN_08) +#define SW1 (BSP_IO_PORT_00_PIN_09) +#define MIKROBUS_IRQ14 (BSP_IO_PORT_00_PIN_10) +#define ARDUINO_A4 (BSP_IO_PORT_00_PIN_14) +#define ARDUINO_A5 (BSP_IO_PORT_00_PIN_15) +#define OSPI_DQ0 (BSP_IO_PORT_01_PIN_00) +#define OSPI_DQ3 (BSP_IO_PORT_01_PIN_01) +#define OSPI_DQ4 (BSP_IO_PORT_01_PIN_02) +#define OSPI_DQ2 (BSP_IO_PORT_01_PIN_03) +#define OSPI_CS (BSP_IO_PORT_01_PIN_04) +#define OSPI_INT (BSP_IO_PORT_01_PIN_05) +#define OSPI_RESET (BSP_IO_PORT_01_PIN_06) +#define LED3 (BSP_IO_PORT_01_PIN_07) +#define ETH_A_RMII_RMII_RXDV (BSP_IO_PORT_01_PIN_12) +#define ETH_A_LINKSTA (BSP_IO_PORT_01_PIN_14) +#define MPLX_CTRL (BSP_IO_PORT_01_PIN_15) +#define NMI (BSP_IO_PORT_02_PIN_00) +#define MD (BSP_IO_PORT_02_PIN_01) +#define CAN_STB (BSP_IO_PORT_02_PIN_07) +#define TDI (BSP_IO_PORT_02_PIN_08) +#define TDO (BSP_IO_PORT_02_PIN_09) +#define SWDIO (BSP_IO_PORT_02_PIN_10) +#define SWCLK (BSP_IO_PORT_02_PIN_11) +#define EXTAL (BSP_IO_PORT_02_PIN_12) +#define XTAL (BSP_IO_PORT_02_PIN_13) +#define ETH_A_RXER (BSP_IO_PORT_03_PIN_00) +#define ETH_A_RXD1 (BSP_IO_PORT_03_PIN_01) +#define ETH_A_RXD0 (BSP_IO_PORT_03_PIN_02) +#define ETH_A_REFCLK (BSP_IO_PORT_03_PIN_03) +#define ETH_A_TXD0 (BSP_IO_PORT_03_PIN_04) +#define ETH_A_TXD1 (BSP_IO_PORT_03_PIN_05) +#define ETH_A_TXEN (BSP_IO_PORT_03_PIN_06) +#define ETH_A_MDIO (BSP_IO_PORT_03_PIN_07) +#define ETH_A_MDC (BSP_IO_PORT_03_PIN_08) +#define ARDUINO_D0_MIKROBUS_RXD3 (BSP_IO_PORT_03_PIN_09) +#define ARDUINO_D1_MIKROBUS_TXD3 (BSP_IO_PORT_03_PIN_10) +#define CAN_RXD (BSP_IO_PORT_03_PIN_11) +#define CAN_TXD (BSP_IO_PORT_03_PIN_12) +#define I3C_SCL0_ARDUINO_MIKROBUS_PMOD1_3_qwiic (BSP_IO_PORT_04_PIN_00) +#define I3C_SDA0_ARDUINO_MIKROBUS_PMOD1_4_qwiic (BSP_IO_PORT_04_PIN_01) +#define ETH_B_MDIO (BSP_IO_PORT_04_PIN_02) +#define ETH_B_LINKSTA (BSP_IO_PORT_04_PIN_03) +#define ETH_B_RST_N (BSP_IO_PORT_04_PIN_04) +#define ETH_B_TXEN (BSP_IO_PORT_04_PIN_05) +#define ETH_B_TXD1 (BSP_IO_PORT_04_PIN_06) +#define USBFS_VBUS (BSP_IO_PORT_04_PIN_07) +#define USBHS_VBUSEN (BSP_IO_PORT_04_PIN_08) +#define USBHS_OVRCURA (BSP_IO_PORT_04_PIN_09) +#define MISOB_B_ARDUINO_MIKROBUS (BSP_IO_PORT_04_PIN_10) +#define MOSIB_B_ARDUINO_MIKROBUS (BSP_IO_PORT_04_PIN_11) +#define RSPCKB_B_ARDUINO_MIKROBUS (BSP_IO_PORT_04_PIN_12) +#define SSLB0_B_ARDUINO_D10_MIKROBUS (BSP_IO_PORT_04_PIN_13) +#define LED2 (BSP_IO_PORT_04_PIN_14) +#define USBFS_VBUS_EN (BSP_IO_PORT_05_PIN_00) +#define USBFS_OVERCURA (BSP_IO_PORT_05_PIN_01) +#define MIKROBUS_RESET (BSP_IO_PORT_05_PIN_02) +#define PMOD2_7_IRQ1 (BSP_IO_PORT_05_PIN_08) +#define GROVE2_IIC_SDA1 (BSP_IO_PORT_05_PIN_11) +#define GROVE2_IIC_SCL1 (BSP_IO_PORT_05_PIN_12) +#define LED1 (BSP_IO_PORT_06_PIN_00) +#define ARDUINO_D5 (BSP_IO_PORT_06_PIN_01) +#define ARDUINO_D6 (BSP_IO_PORT_06_PIN_02) +#define ARDUINO_D9 (BSP_IO_PORT_06_PIN_03) +#define PMOD1_3_MISO0_RXD0_SCL0 (BSP_IO_PORT_06_PIN_09) +#define PMOD1_2_MOSI0_TXD0 (BSP_IO_PORT_06_PIN_10) +#define PMOD1_4_SCK0 (BSP_IO_PORT_06_PIN_11) +#define PMOD1_1_SSL0_CTS_RTS (BSP_IO_PORT_06_PIN_12) +#define PMOD1_1_CTS0 (BSP_IO_PORT_06_PIN_13) +#define PMOD1_9_GPIO (BSP_IO_PORT_06_PIN_14) +#define PMOD1_10_GPIO (BSP_IO_PORT_06_PIN_15) +#define ETH_B_TXD0 (BSP_IO_PORT_07_PIN_00) +#define ETH_B_REFCLK (BSP_IO_PORT_07_PIN_01) +#define ETH_B_RXD0 (BSP_IO_PORT_07_PIN_02) +#define ETH_B_RXD1 (BSP_IO_PORT_07_PIN_03) +#define ETH_B_RXER (BSP_IO_PORT_07_PIN_04) +#define ETH_B_RMII_RXDV (BSP_IO_PORT_07_PIN_05) +#define I3C_SDA0_PULLUP (BSP_IO_PORT_07_PIN_11) +#define OSPI_DQ5 (BSP_IO_PORT_08_PIN_00) +#define OSPI_DS (BSP_IO_PORT_08_PIN_01) +#define OSPI_DQ6 (BSP_IO_PORT_08_PIN_02) +#define OSPI_DQ1 (BSP_IO_PORT_08_PIN_03) +#define OSPI_DQ7 (BSP_IO_PORT_08_PIN_04) +#define OSPI_CK (BSP_IO_PORT_08_PIN_08) +#define PMOD2_8_RESET (BSP_IO_PORT_08_PIN_09) +#define PMOD2_9_GPIO (BSP_IO_PORT_08_PIN_10) +#define PMOD2_10_GPIO (BSP_IO_PORT_08_PIN_11) +#define ARDUINO_RESET (BSP_IO_PORT_08_PIN_12) +#define USBFS_P (BSP_IO_PORT_08_PIN_14) +#define USBFS_N (BSP_IO_PORT_08_PIN_15) +#define ARDUINO_D4 (BSP_IO_PORT_09_PIN_05) +#define ARDUINO_D2 (BSP_IO_PORT_09_PIN_06) +#define ARDUINO_D3_MIKROBUS_GTIOC13A (BSP_IO_PORT_09_PIN_07) +#define ARDUINO_D7 (BSP_IO_PORT_09_PIN_08) +#define ARDUINO_D8 (BSP_IO_PORT_09_PIN_09) +#define PMOD2_3_MISO2_RXD2 (BSP_IO_PORT_10_PIN_02) +#define PMOD2_2_MOSI2_TXD2 (BSP_IO_PORT_10_PIN_03) +#define PMOD2_4_SCK2 (BSP_IO_PORT_10_PIN_04) +#define PMOD2_1_CTS_RTS_SSL2 (BSP_IO_PORT_10_PIN_05) +#define PMOD2_1_CTS2 (BSP_IO_PORT_10_PIN_06) +#define PMOD1_8_RESET (BSP_IO_PORT_10_PIN_08) +#define JLOB_COMS_TX (BSP_IO_PORT_10_PIN_14) +#define JLOB_COMS_RX (BSP_IO_PORT_10_PIN_15) +#define I3C_SCL0_PULLUP (BSP_IO_PORT_11_PIN_00) +#define USBHS_VBUS (BSP_IO_PORT_11_PIN_01) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA8M1 EK */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..f2f1ae0c9 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,56 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (20000000) /* XTAL 20000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (7) /* HOCO 48MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(96,0) /* PLL Mul x80-99|Mul x96|PLL Mul x96.00 */ +#define BSP_CFG_PLL_FREQUENCY_HZ (960000000) /* PLL 960000000Hz */ +#define BSP_CFG_PLODIVP (BSP_CLOCKS_PLL_DIV_2) /* PLL1P Div /2 */ +#define BSP_CFG_PLL1P_FREQUENCY_HZ (480000000) /* PLL1P 480000000Hz */ +#define BSP_CFG_PLODIVQ (BSP_CLOCKS_PLL_DIV_4) /* PLL1Q Div /4 */ +#define BSP_CFG_PLL1Q_FREQUENCY_HZ (240000000) /* PLL1Q 240000000Hz */ +#define BSP_CFG_PLODIVR (BSP_CLOCKS_PLL_DIV_2) /* PLL1R Div /2 */ +#define BSP_CFG_PLL1R_FREQUENCY_HZ (480000000) /* PLL1R 480000000Hz */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL2 Disabled */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(96,0) /* PLL2 Mul x80-99|Mul x96|PLL2 Mul x96.00 */ +#define BSP_CFG_PLL2_FREQUENCY_HZ (0) /* PLL2 0Hz */ +#define BSP_CFG_PL2ODIVP (BSP_CLOCKS_PLL_DIV_2) /* PLL2P Div /2 */ +#define BSP_CFG_PLL2P_FREQUENCY_HZ (0) /* PLL2P 0Hz */ +#define BSP_CFG_PL2ODIVQ (BSP_CLOCKS_PLL_DIV_2) /* PLL2Q Div /2 */ +#define BSP_CFG_PLL2Q_FREQUENCY_HZ (0) /* PLL2Q 0Hz */ +#define BSP_CFG_PL2ODIVR (BSP_CLOCKS_PLL_DIV_2) /* PLL2R Div /2 */ +#define BSP_CFG_PLL2R_FREQUENCY_HZ (0) /* PLL2R 0Hz */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL1P) /* Clock Src: PLL1P */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_SCICLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* SCICLK Disabled */ +#define BSP_CFG_SPICLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* SPICLK Disabled */ +#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ +#define BSP_CFG_I3CCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* I3CCLK Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL1Q) /* UCK Src: PLL1Q */ +#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL1P) /* U60CK Src: PLL1P */ +#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ +#define BSP_CFG_CPUCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CPUCLK Div /1 */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKA Div /4 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_8) /* PCLKB Div /8 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_8) /* PCLKC Div /8 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKD Div /4 */ +#define BSP_CFG_PCLKE_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKE Div /2 */ +#define BSP_CFG_SDCLK_OUTPUT (1) /* SDCLK Enabled */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* BCLK Div /4 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_8) /* FCLK Div /8 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_SCICLK_DIV (BSP_CLOCKS_SCI_CLOCK_DIV_4) /* SCICLK Div /4 */ +#define BSP_CFG_SPICLK_DIV (BSP_CLOCKS_SPI_CLOCK_DIV_4) /* SPICLK Div /4 */ +#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_8) /* CANFDCLK Div /8 */ +#define BSP_CFG_I3CCLK_DIV (BSP_CLOCKS_I3C_CLOCK_DIV_3) /* I3CCLK Div /3 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCK Div /5 */ +#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_8) /* U60CK Div /8 */ +#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_4) /* OCTASPICLK Div /4 */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include <stdint.h> +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..b92421739 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/pin_data.c @@ -0,0 +1,275 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_02_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, + { + .pin = BSP_IO_PORT_04_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, + { + .pin = BSP_IO_PORT_04_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_05_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_MID | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_05_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_MID | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_06_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_08_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_08_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_08_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_10_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_10_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_10_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_10_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_10_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_10_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_10_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_11_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld new file mode 100644 index 000000000..d7f78a915 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld @@ -0,0 +1,823 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; +OPTION_SETTING_DATA_FLASH_S_START = DEFINED(OPTION_SETTING_DATA_FLASH_S_START) ? OPTION_SETTING_DATA_FLASH_S_START : 0; +OPTION_SETTING_DATA_FLASH_S_LENGTH = DEFINED(OPTION_SETTING_DATA_FLASH_S_LENGTH) ? OPTION_SETTING_DATA_FLASH_S_LENGTH : 0; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_DATA_FLASH = PROJECT_SECURE_OR_FLAT && (OPTION_SETTING_DATA_FLASH_S_LENGTH != 0); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + OPTION_SETTING_DATA_FLASH_S (r) : ORIGIN = OPTION_SETTING_DATA_FLASH_S_START, LENGTH = OPTION_SETTING_DATA_FLASH_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __FLASH_NSC_START = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + . = .; + __nocache_pre_location = .; + .nocache ALIGN(32) (NOLOAD): + { + __nocache_start = .; + + KEEP(*(.nocache)) + + . = ALIGN(32); + __nocache_end = .; + } > RAM + . = (SIZEOF(.nocache) > 0) ? __nocache_end : __nocache_pre_location; + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __RAM_NSC_START = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(FLASH_BOOTLOADER_LENGTH) ? (RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH) : DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_NSC_START, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + . = .; + __nocache_sdram_pre_location = .; + .nocache_sdram ALIGN(32) (NOLOAD): + { + __nocache_sdram_start = .; + + KEEP(*(.nocache_sdram)) + + . = ALIGN(32); + __nocache_sdram_end = .; + } > SDRAM + . = (SIZEOF(.nocache_sdram) > 0) ? __nocache_sdram_end : __nocache_sdram_pre_location; + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_DATA_FLASH_S_S = ORIGIN(OPTION_SETTING_DATA_FLASH_S); + + .option_setting_data_flash_s : + { + __OPTION_SETTING_DATA_FLASH_S_Start = .; + KEEP(*(.option_setting_data_flash_fsblctrl0)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x04 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_fsblctrl1)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x08 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_fsblctrl2)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x0C : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_sacc0)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x10 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_sacc1)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x14 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_samr)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x2E0 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_hoemrtpk)) + __OPTION_SETTING_DATA_FLASH_S_End = .; + } > OPTION_SETTING_DATA_FLASH_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_DATA_FLASH_S_N = __OPTION_SETTING_DATA_FLASH_S_End; +} diff --git a/hw/bsp/ra/boards/ra8m1_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra8m1_ek/script/memory_regions.ld new file mode 100644 index 000000000..2bc162511 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/script/memory_regions.ld @@ -0,0 +1,30 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x22000000; + RAM_LENGTH = 0xE0000; + FLASH_START = 0x02000000; + FLASH_LENGTH = 0x1F8000; + DATA_FLASH_START = 0x27000000; + DATA_FLASH_LENGTH = 0x3000; + OPTION_SETTING_START = 0x0300A100; + OPTION_SETTING_LENGTH = 0x100; + OPTION_SETTING_S_START = 0x0300A200; + OPTION_SETTING_S_LENGTH = 0x100; + OPTION_SETTING_DATA_FLASH_S_START = 0x27030080; + OPTION_SETTING_DATA_FLASH_S_LENGTH = 0x800; + ID_CODE_START = 0x00000000; + ID_CODE_LENGTH = 0x0; + SDRAM_START = 0x68000000; + SDRAM_LENGTH = 0x8000000; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x0; + OSPI_DEVICE_0_START = 0x80000000; + OSPI_DEVICE_0_LENGTH = 0x10000000; + OSPI_DEVICE_1_START = 0x90000000; + OSPI_DEVICE_1_LENGTH = 0x10000000; + ITCM_START = 0x00000000; + ITCM_LENGTH = 0x10000; + DTCM_START = 0x20000000; + DTCM_LENGTH = 0x10000; + NS_OFFSET_START = 0x10000000; + NS_OFFSET_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..0f83b4a11 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml @@ -0,0 +1,680 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<raConfiguration version="9"> + <generalSettings> + <option key="#Board#" value="board.ra8m1ek"/> + <option key="CPU" value="RA8M1"/> + <option key="Core" value="CM85"/> + <option key="#TargetName#" value="R7FA8M1AHECBD"/> + <option key="#TargetARCHITECTURE#" value="cortex-m85"/> + <option key="#DeviceCommand#" value="R7FA8M1AH"/> + <option key="#RTOS#" value="_none"/> + <option key="#pinconfiguration#" value="R7FA8M1AHECBD.pincfg"/> + <option key="#FSPVersion#" value="5.6.0"/> + <option key="#ConfigurationFragments#" value="Renesas##BSP##Board##ra8m1_ek##"/> + <option key="#SELECTED_TOOLCHAIN#" value="com.renesas.cdt.managedbuild.gnuarm.toolchain."/> + </generalSettings> + <raBspConfiguration> + <config id="config.bsp.ra8m1.R7FA8M1AHECBD"> + <property id="config.bsp.part_number" value="config.bsp.part_number.value"/> + <property id="config.bsp.rom_size_bytes" value="config.bsp.rom_size_bytes.value"/> + <property id="config.bsp.rom_size_bytes_hidden" value="2064384"/> + <property id="config.bsp.ram_size_bytes" value="config.bsp.ram_size_bytes.value"/> + <property id="config.bsp.data_flash_size_bytes" value="config.bsp.data_flash_size_bytes.value"/> + <property id="config.bsp.package_style" value="config.bsp.package_style.value"/> + <property id="config.bsp.package_pins" value="config.bsp.package_pins.value"/> + <property id="config.bsp.irq_count_hidden" value="96"/> + </config> + <config id="config.bsp.ra8m1"> + <property id="config.bsp.series" value="config.bsp.series.value"/> + </config> + <config id="config.bsp.ra8m1.fsp"> + <property id="config.bsp.fsp.inline_irq_functions" value="config.bsp.common.inline_irq_functions.enabled"/> + <property id="config.bsp.fsp.sdram.enabled" value="config.bsp.fsp.sdram.enabled.disabled"/> + <property id="config.bsp.fsp.sdram.tras" value="config.bsp.fsp.sdram.tras.6"/> + <property id="config.bsp.fsp.sdram.trcd" value="config.bsp.fsp.sdram.trcd.3"/> + <property id="config.bsp.fsp.sdram.trp" value="config.bsp.fsp.sdram.trp.3"/> + <property id="config.bsp.fsp.sdram.twr" value="config.bsp.fsp.sdram.twr.2"/> + <property id="config.bsp.fsp.sdram.tcl" value="config.bsp.fsp.sdram.tcl.3"/> + <property id="config.bsp.fsp.sdram.trfc" value="937"/> + <property id="config.bsp.fsp.sdram.trefw" value="config.bsp.fsp.sdram.trefw.8"/> + <property id="config.bsp.fsp.sdram.arfi" value="config.bsp.fsp.sdram.arfi.10"/> + <property id="config.bsp.fsp.sdram.arfc" value="config.bsp.fsp.sdram.arfc.8"/> + <property id="config.bsp.fsp.sdram.prc" value="config.bsp.fsp.sdram.prc.3"/> + <property id="config.bsp.fsp.sdram.addr_shift" value="config.bsp.fsp.sdram.addr_shift.9"/> + <property id="config.bsp.fsp.sdram.endian_mode" value="config.bsp.fsp.sdram.endian_mode.little"/> + <property id="config.bsp.fsp.sdram.continuous_access_mode" value="config.bsp.fsp.sdram.continuous_access_mode.enabled"/> + <property id="config.bsp.fsp.sdram.bus_width" value="config.bsp.fsp.sdram.bus_width.16"/> + <property id="config.bsp.fsp.tz.exception_response" value="config.bsp.fsp.tz.exception_response.nmi"/> + <property id="config.bsp.fsp.tz.cmsis.bfhfnmins" value="config.bsp.fsp.tz.cmsis.bfhfnmins.secure"/> + <property id="config.bsp.fsp.tz.cmsis.sysresetreqs" value="config.bsp.fsp.tz.cmsis.sysresetreqs.secure_only"/> + <property id="config.bsp.fsp.tz.cmsis.s_priority_boost" value="config.bsp.fsp.tz.cmsis.s_priority_boost.disabled"/> + <property id="config.bsp.fsp.tz.rstsar" value="config.bsp.fsp.tz.rstsar.both"/> + <property id="config.bsp.fsp.tz.bbfsar" value="config.bsp.fsp.tz.bbfsar.both"/> + <property id="config.bsp.fsp.tz.sramsar.sramsa0" value="config.bsp.fsp.tz.sramsar.sramsa0.both"/> + <property id="config.bsp.fsp.tz.sramsar.sramsa1" value="config.bsp.fsp.tz.sramsar.sramsa1.both"/> + <property id="config.bsp.fsp.tz.sramsar.stbramsa" value="config.bsp.fsp.tz.sramsar.stbramsa.both"/> + <property id="config.bsp.fsp.tz.bussara" value="config.bsp.fsp.tz.bussara.both"/> + <property id="config.bsp.fsp.tz.bussarb" value="config.bsp.fsp.tz.bussarb.both"/> + <property id="config.bsp.fsp.tz.bussarc" value="config.bsp.fsp.tz.bussarc.both"/> + <property id="config.bsp.fsp.tz.banksel_sel" value="config.bsp.fsp.tz.banksel_sel.both"/> + <property id="config.bsp.fsp.tz.uninitialized_ns_application_fallback" value="config.bsp.fsp.tz.uninitialized_ns_application_fallback.enabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_start_mode" value="config.bsp.fsp.OFS0.iwdt_start_mode.disabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_timeout" value="config.bsp.fsp.OFS0.iwdt_timeout.2048"/> + <property id="config.bsp.fsp.OFS0.iwdt_divisor" value="config.bsp.fsp.OFS0.iwdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_end" value="config.bsp.fsp.OFS0.iwdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_start" value="config.bsp.fsp.OFS0.iwdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.iwdt_reset_interrupt" value="config.bsp.fsp.OFS0.iwdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.iwdt_stop_control" value="config.bsp.fsp.OFS0.iwdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS0.wdt_start_mode" value="config.bsp.fsp.OFS0.wdt_start_mode.register"/> + <property id="config.bsp.fsp.OFS0.wdt_timeout" value="config.bsp.fsp.OFS0.wdt_timeout.16384"/> + <property id="config.bsp.fsp.OFS0.wdt_divisor" value="config.bsp.fsp.OFS0.wdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.wdt_window_end" value="config.bsp.fsp.OFS0.wdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.wdt_window_start" value="config.bsp.fsp.OFS0.wdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.wdt_reset_interrupt" value="config.bsp.fsp.OFS0.wdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.wdt_stop_control" value="config.bsp.fsp.OFS0.wdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS1_SEL.voltage_detection0_level" value="config.bsp.fsp.OFS1_SEL.voltage_detection0_level.secure"/> + <property id="config.bsp.fsp.OFS1_SEL.voltage_detection0.start" value="config.bsp.fsp.OFS1_SEL.voltage_detection0.start.secure"/> + <property id="config.bsp.fsp.OFS1_SEL.voltage_detection0.low_power_consumption" value="config.bsp.fsp.OFS1_SEL.voltage_detection0.low_power_consumption.secure"/> + <property id="config.bsp.fsp.OFS1_SEL.swdbg" value="config.bsp.fsp.OFS1_SEL.swdbg.secure"/> + <property id="config.bsp.fsp.OFS1_SEL.initeccen" value="config.bsp.fsp.OFS1_SEL.initeccen.secure"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0.start" value="config.bsp.fsp.OFS1.voltage_detection0.start.disabled"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0_level" value="config.bsp.fsp.OFS1.voltage_detection0_level.160"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0.low_power_consumption" value="config.bsp.fsp.OFS1.voltage_detection0.low_power_consumption.disabled"/> + <property id="config.bsp.fsp.OFS1.hoco_osc" value="config.bsp.fsp.OFS1.hoco_osc.disabled"/> + <property id="config.bsp.fsp.OFS1.swdbg" value="config.bsp.fsp.OFS1.swdbg.disabled"/> + <property id="config.bsp.fsp.OFS1.initeccen" value="config.bsp.fsp.OFS1.initeccen.disabled"/> + <property id="config.bsp.fsp.OFS2.dcdc" value="config.bsp.fsp.OFS2.dcdc.enabled"/> + <property id="config.bsp.fsp.BPS.BPS0" value=""/> + <property id="config.bsp.fsp.BPS.BPS1" value=""/> + <property id="config.bsp.fsp.BPS.BPS2" value=""/> + <property id="config.bsp.fsp.BPS.BPS3" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS0" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS1" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS2" value=""/> + <property id="config.bsp.fsp.PBPS.PBPS3" value=""/> + <property id="config.bsp.fsp.dual_bank" value="config.bsp.fsp.dual_bank.disabled"/> + <property id="config.bsp.fsp.FSBLCTRL0.FSBLEN" value="config.bsp.fsp.FSBLCTRL0.FSBLEN.disabled"/> + <property id="config.bsp.fsp.FSBLCTRL0.FSBLSKIPSW" value="config.bsp.fsp.FSBLCTRL0.FSBLSKIPSW.disabled"/> + <property id="config.bsp.fsp.FSBLCTRL0.FSBLSKIPDS" value="config.bsp.fsp.FSBLCTRL0.FSBLSKIPDS.disabled"/> + <property id="config.bsp.fsp.FSBLCTRL0.FSBLCLK" value="config.bsp.fsp.FSBLCTRL0.FSBLCLK.240"/> + <property id="config.bsp.fsp.FSBLCTRL1.FSBLEXMD" value="config.bsp.fsp.FSBLCTRL1.FSBLEXMD.secure_report"/> + <property id="config.bsp.fsp.FSBLCTRL2.PORTPN" value="config.bsp.fsp.FSBLCTRL2.PORTPN.15"/> + <property id="config.bsp.fsp.FSBLCTRL2.PORTGN" value="config.bsp.fsp.FSBLCTRL2.PORTGN.reserved"/> + <property id="config.bsp.fsp.SACC0" value="0xFFFFFFFF"/> + <property id="config.bsp.fsp.SACC1" value="0xFFFFFFFF"/> + <property id="config.bsp.fsp.SAMR" value="0xFFFFFFFF"/> + <property id="config.bsp.fsp.hoco_fll" value="config.bsp.fsp.hoco_fll.disabled"/> + <property id="config.bsp.fsp.clock_settling_delay" value="config.bsp.fsp.clock_settling_delay.enabled"/> + <property id="config.bsp.fsp.sleep_mode_delays" value="config.bsp.fsp.sleep_mode_delays.enabled"/> + <property id="config.bsp.fsp.rtos_idle_sleep" value="config.bsp.fsp.rtos_idle_sleep.disabled"/> + <property id="config.bsp.fsp.mstp_change_delays" value="config.bsp.fsp.mstp_change_delays.enabled"/> + <property id="config.bsp.fsp.settling_delay_us" value="150"/> + <property id="config.bsp.common.main_osc_wait" value="config.bsp.common.main_osc_wait.wait_8163"/> + <property id="config.bsp.fsp.mcu.adc.max_freq_hz" value="60000000"/> + <property id="config.bsp.fsp.mcu.sci_b_uart.max_baud" value="30000000"/> + <property id="config.bsp.fsp.mcu.sci_b_uart.ctspen_channels" value="0x021F"/> + <property id="config.bsp.fsp.mcu.adc.sample_and_hold" value="1"/> + <property id="config.bsp.fsp.mcu.adc.sensors_are_exclusive" value="0"/> + <property id="config.bsp.fsp.mcu.sci_spi.max_bitrate" value="30000000"/> + <property id="config.bsp.fsp.mcu.spi.max_bitrate" value="60000000"/> + <property id="config.bsp.fsp.mcu.iic_master.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_master.fastplus_channels" value="0x3"/> + <property id="config.bsp.fsp.mcu.iic_slave.rate.rate_fastplus" value="1"/> + <property id="config.bsp.fsp.mcu.iic_slave.fastplus_channels" value="0x3"/> + <property id="config.bsp.fsp.mcu.gpt.pin_count_source_channels" value="0x3FFF"/> + <property id="config.bsp.fsp.mcu.canfd.num_channels" value="2"/> + <property id="config.bsp.fsp.mcu.canfd.rx_fifos" value="2"/> + <property id="config.bsp.fsp.mcu.canfd.buffer_ram" value="1216"/> + <property id="config.bsp.fsp.mcu.canfd.afl_rules" value="32"/> + <property id="config.bsp.fsp.mcu.canfd.afl_rules_each_chnl" value="16"/> + <property id="config.bsp.fsp.mcu.canfd.max_data_rate_hz" value="8"/> + <property id="config.bsp.fsp.mcu.adc_dmac.samples_per_channel" value="32767"/> + <property id="config.bsp.fsp.mcu.sci_b_lin.max_baud" value="7500000"/> + <property id="config.bsp.fsp.dcache" value="config.bsp.fsp.dcache.disabled"/> + </config> + <config id="config.bsp.ra"> + <property id="config.bsp.common.main" value="0x1000"/> + <property id="config.bsp.common.heap" value="0x1000"/> + <property id="config.bsp.common.vcc" value="3300"/> + <property id="config.bsp.common.checking" value="config.bsp.common.checking.disabled"/> + <property id="config.bsp.common.assert" value="config.bsp.common.assert.none"/> + <property id="config.bsp.common.error_log" value="config.bsp.common.error_log.none"/> + <property id="config.bsp.common.soft_reset" value="config.bsp.common.soft_reset.disabled"/> + <property id="config.bsp.common.main_osc_populated" value="config.bsp.common.main_osc_populated.enabled"/> + <property id="config.bsp.common.pfs_protect" value="config.bsp.common.pfs_protect.enabled"/> + <property id="config.bsp.common.c_runtime_init" value="config.bsp.common.c_runtime_init.enabled"/> + <property id="config.bsp.common.early_init" value="config.bsp.common.early_init.disabled"/> + <property id="config.bsp.common.main_osc_clock_source" value="config.bsp.common.main_osc_clock_source.crystal"/> + <property id="config.bsp.common.subclock_populated" value="config.bsp.common.subclock_populated.enabled"/> + <property id="config.bsp.common.subclock_drive" value="config.bsp.common.subclock_drive.standard"/> + <property id="config.bsp.common.subclock_stabilization_ms" value="1000"/> + </config> + </raBspConfiguration> + <raClockConfiguration> + <node id="board.clock.xtal.freq" mul="20000000" option="_edit"/> + <node id="board.clock.hoco.freq" option="board.clock.hoco.freq.48m"/> + <node id="board.clock.loco.freq" option="board.clock.loco.freq.32768"/> + <node id="board.clock.moco.freq" option="board.clock.moco.freq.8m"/> + <node id="board.clock.subclk.freq" option="board.clock.subclk.freq.32768"/> + <node id="board.clock.pll.source" option="board.clock.pll.source.xtal"/> + <node id="board.clock.pll.div" option="board.clock.pll.div.2"/> + <node id="board.clock.pll.mul" option="board.clock.pll.mul.96_00"/> + <node id="board.clock.pll.display" option="board.clock.pll.display.value"/> + <node id="board.clock.pll1p.div" option="board.clock.pll1p.div.2"/> + <node id="board.clock.pll1p.display" option="board.clock.pll1p.display.value"/> + <node id="board.clock.pll1q.div" option="board.clock.pll1q.div.4"/> + <node id="board.clock.pll1q.display" option="board.clock.pll1q.display.value"/> + <node id="board.clock.pll1r.div" option="board.clock.pll1r.div.2"/> + <node id="board.clock.pll1r.display" option="board.clock.pll1r.display.value"/> + <node id="board.clock.pll2.source" option="board.clock.pll2.source.disabled"/> + <node id="board.clock.pll2.div" option="board.clock.pll2.div.2"/> + <node id="board.clock.pll2.mul" option="board.clock.pll2.mul.96_00"/> + <node id="board.clock.pll2.display" option="board.clock.pll2.display.value"/> + <node id="board.clock.pll2p.div" option="board.clock.pll2p.div.2"/> + <node id="board.clock.pll2p.display" option="board.clock.pll2p.display.value"/> + <node id="board.clock.pll2q.div" option="board.clock.pll2q.div.2"/> + <node id="board.clock.pll2q.display" option="board.clock.pll2q.display.value"/> + <node id="board.clock.pll2r.div" option="board.clock.pll2r.div.2"/> + <node id="board.clock.pll2r.display" option="board.clock.pll2r.display.value"/> + <node id="board.clock.clock.source" option="board.clock.clock.source.pll1p"/> + <node id="board.clock.clkout.source" option="board.clock.clkout.source.disabled"/> + <node id="board.clock.sciclk.source" option="board.clock.sciclk.source.disabled"/> + <node id="board.clock.spiclk.source" option="board.clock.spiclk.source.disabled"/> + <node id="board.clock.canfdclk.source" option="board.clock.canfdclk.source.disabled"/> + <node id="board.clock.i3cclk.source" option="board.clock.i3cclk.source.disabled"/> + <node id="board.clock.uck.source" option="board.clock.uck.source.pll1q"/> + <node id="board.clock.u60ck.source" option="board.clock.u60ck.source.pll1p"/> + <node id="board.clock.octaspiclk.source" option="board.clock.octaspiclk.source.disabled"/> + <node id="board.clock.cpuclk.div" option="board.clock.cpuclk.div.1"/> + <node id="board.clock.iclk.div" option="board.clock.iclk.div.2"/> + <node id="board.clock.pclka.div" option="board.clock.pclka.div.4"/> + <node id="board.clock.pclkb.div" option="board.clock.pclkb.div.8"/> + <node id="board.clock.pclkc.div" option="board.clock.pclkc.div.8"/> + <node id="board.clock.pclkd.div" option="board.clock.pclkd.div.4"/> + <node id="board.clock.pclke.div" option="board.clock.pclke.div.2"/> + <node id="board.clock.sdclkout.enable" option="board.clock.sdclkout.enable.enabled"/> + <node id="board.clock.bclk.div" option="board.clock.bclk.div.4"/> + <node id="board.clock.bclkout.div" option="board.clock.bclkout.div.2"/> + <node id="board.clock.fclk.div" option="board.clock.fclk.div.8"/> + <node id="board.clock.clkout.div" option="board.clock.clkout.div.1"/> + <node id="board.clock.sciclk.div" option="board.clock.sciclk.div.4"/> + <node id="board.clock.spiclk.div" option="board.clock.spiclk.div.4"/> + <node id="board.clock.canfdclk.div" option="board.clock.canfdclk.div.8"/> + <node id="board.clock.i3cclk.div" option="board.clock.i3cclk.div.3"/> + <node id="board.clock.uck.div" option="board.clock.uck.div.5"/> + <node id="board.clock.u60ck.div" option="board.clock.u60ck.div.8"/> + <node id="board.clock.octaspiclk.div" option="board.clock.octaspiclk.div.4"/> + <node id="board.clock.cpuclk.display" option="board.clock.cpuclk.display.value"/> + <node id="board.clock.iclk.display" option="board.clock.iclk.display.value"/> + <node id="board.clock.pclka.display" option="board.clock.pclka.display.value"/> + <node id="board.clock.pclkb.display" option="board.clock.pclkb.display.value"/> + <node id="board.clock.pclkc.display" option="board.clock.pclkc.display.value"/> + <node id="board.clock.pclkd.display" option="board.clock.pclkd.display.value"/> + <node id="board.clock.pclke.display" option="board.clock.pclke.display.value"/> + <node id="board.clock.sdclkout.display" option="board.clock.sdclkout.display.value"/> + <node id="board.clock.bclk.display" option="board.clock.bclk.display.value"/> + <node id="board.clock.bclkout.display" option="board.clock.bclkout.display.value"/> + <node id="board.clock.fclk.display" option="board.clock.fclk.display.value"/> + <node id="board.clock.clkout.display" option="board.clock.clkout.display.value"/> + <node id="board.clock.sciclk.display" option="board.clock.sciclk.display.value"/> + <node id="board.clock.spiclk.display" option="board.clock.spiclk.display.value"/> + <node id="board.clock.canfdclk.display" option="board.clock.canfdclk.display.value"/> + <node id="board.clock.i3cclk.display" option="board.clock.i3cclk.display.value"/> + <node id="board.clock.uck.display" option="board.clock.uck.display.value"/> + <node id="board.clock.u60ck.display" option="board.clock.u60ck.display.value"/> + <node id="board.clock.octaspiclk.display" option="board.clock.octaspiclk.display.value"/> + </raClockConfiguration> + <raComponentSelection> + <component apiversion="" class="Projects" condition="" group="all" subgroup="baremetal_blinky" variant="" vendor="Renesas" version="5.6.0"> + <description>Simple application that blinks an LED. No RTOS included.</description> + <originalPack>Renesas.RA_baremetal_blinky.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="Common" condition="" group="all" subgroup="fsp_common" variant="" vendor="Renesas" version="5.6.0"> + <description>Board Support Package Common Files</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_ioport" variant="" vendor="Renesas" version="5.6.0"> + <description>I/O Port</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="CMSIS" condition="" group="CMSIS5" subgroup="CoreM" variant="" vendor="Arm" version="6.1.0+fsp.5.6.0"> + <description>Arm CMSIS Version 6 - Core (M)</description> + <originalPack>Arm.CMSIS6.6.1.0+fsp.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="Board" subgroup="ra8m1_ek" variant="" vendor="Renesas" version="5.6.0"> + <description>RA8M1-EK Board Support Files</description> + <originalPack>Renesas.RA_board_ra8m1_ek.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra8m1" subgroup="device" variant="R7FA8M1AHECBD" vendor="Renesas" version="5.6.0"> + <description>Board support package for R7FA8M1AHECBD</description> + <originalPack>Renesas.RA_mcu_ra8m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra8m1" subgroup="device" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA8M1</description> + <originalPack>Renesas.RA_mcu_ra8m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra8m1" subgroup="fsp" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA8M1 - FSP Data</description> + <originalPack>Renesas.RA_mcu_ra8m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra8m1" subgroup="events" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA8M1 - Events</description> + <originalPack>Renesas.RA_mcu_ra8m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_usb_basic" variant="" vendor="Renesas" version="5.6.0"> + <description>USB Basic</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_usb_pcdc" variant="" vendor="Renesas" version="5.6.0"> + <description>USB Peripheral Communications Device Class</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + </raComponentSelection> + <raElcConfiguration/> + <raIcuConfiguration/> + <raModuleConfiguration> + <module id="module.driver.ioport_on_ioport.0"> + <property id="module.driver.ioport.name" value="g_ioport"/> + <property id="module.driver.ioport.elc_trigger_ioport1" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport2" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport3" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport4" value="_disabled"/> + <property id="module.driver.ioport.pincfg" value="g_bsp_pin_cfg"/> + </module> + <module id="module.driver.pcdc_on_usb.216998869"> + <property id="module.driver.pcdc.name" value="g_pcdc0"/> + </module> + <module id="module.driver.basic_on_usb.877233012"> + <property id="module.driver.basic.name" value="g_basic1"/> + <property id="module.driver.usb_basic.usb_mode" value="module.driver.usb_basic.usb_mode.host"/> + <property id="module.driver.usb_basic.usb_speed" value="module.driver.usb_basic.usb_speed.hs"/> + <property id="module.driver.usb_basic.usb_modulenumber" value="module.driver.usb_basic.usb_modulenumber.1"/> + <property id="module.driver.usb_basic.usb_classtype" value="module.driver.usb_basic.usb_classtype.pcdc"/> + <property id="module.driver.usb_basic.p_usb_reg" value="g_usb_descriptor"/> + <property id="module.driver.usb_basic.complience_cb" value="NULL"/> + <property id="module.driver.usb_basic.ipl" value="board.icu.common.irq.priority12"/> + <property id="module.driver.usb_basic.ipl_r" value="board.icu.common.irq.priority12"/> + <property id="module.driver.usb_basic.ipl_d0" value="board.icu.common.irq.priority12"/> + <property id="module.driver.usb_basic.ipl_d1" value="board.icu.common.irq.priority12"/> + <property id="module.driver.usb_basic.hsipl" value="board.icu.common.irq.priority12"/> + <property id="module.driver.usb_basic.hsipl_d0" value="board.icu.common.irq.priority12"/> + <property id="module.driver.usb_basic.hsipl_d1" value="board.icu.common.irq.priority12"/> + <property id="module.driver.usb_basic.rtos_callback" value="NULL"/> + <property id="module.driver.usb_basic.other_context" value="NULL"/> + </module> + <context id="_hal.0"> + <stack module="module.driver.ioport_on_ioport.0"/> + <stack module="module.driver.pcdc_on_usb.216998869"> + <stack module="module.driver.basic_on_usb.877233012" requires="module.driver.basic_on_usb.requires.basic"/> + </stack> + </context> + <config id="config.driver.usb_basic"> + <property id="config.driver.usb_basic.param_checking_enable" value="config.driver.usb_basic.param_checking_enable.bsp"/> + <property id="config.driver.usb_basic.pll_clock_frequency" value="config.driver.usb_basic.pll_clock_frequency.20mhz"/> + <property id="config.driver.usb_basic.buswait" value="config.driver.usb_basic.buswait.7"/> + <property id="config.driver.usb_basic.bc_function" value="config.driver.usb_basic.bc_function.enable"/> + <property id="config.driver.usb_basic.power_source" value="config.driver.usb_basic.power_source.high"/> + <property id="config.driver.usb_basic.dcp_function" value="config.driver.usb_basic.dcp_function.disable"/> + <property id="config.driver.usb_basic.request" value="config.driver.usb_basic.request.enable"/> + <property id="config.driver.usb_basic.dblb" value="config.driver.usb_basic.dblb.enable"/> + <property id="config.driver.usb_basic.cntmd" value="config.driver.usb_basic.cntmd.disable"/> + <property id="config.driver.usb_basic.ldo_regulator" value="config.driver.usb_basic.ldo_regulator.disable"/> + <property id="config.driver.usb_basic.type_c" value="config.driver.usb_basic.type_c.disable"/> + <property id="config.driver.usb_basic.dma" value="config.driver.usb_basic.dma.disable"/> + <property id="config.driver.usb_basic.source_address" value="config.driver.usb_basic.source_address.none"/> + <property id="config.driver.usb_basic.dest_address" value="config.driver.usb_basic.dest_address.none"/> + <property id="config.driver.usb_basic.compliance_mode" value="config.driver.usb_basic.compliance_mode.disable"/> + <property id="config.driver.usb_basic.tpl_table" value="NULL"/> + </config> + <config id="config.driver.usb_pcdc"> + <property id="config.driver.usb_pcdc.bulk_in" value="config.driver.usb_pcdc.bulk_in.pipe4"/> + <property id="config.driver.usb_pcdc.bulk_out" value="config.driver.usb_pcdc.bulk_out.pipe5"/> + <property id="config.driver.usb_pcdc.int_in" value="config.driver.usb_pcdc.int_in.pipe6"/> + </config> + <config id="config.driver.usb_pcdc_class"/> + <config id="config.driver.ioport"> + <property id="config.driver.ioport.checking" value="config.driver.ioport.checking.system"/> + </config> + </raModuleConfiguration> + <raPinConfiguration> + <symbolicName propertyId="p000.symbolic_name" value="ENET_RMII_INT"/> + <symbolicName propertyId="p001.symbolic_name" value="ARDUINO_A3"/> + <symbolicName propertyId="p002.symbolic_name" value="GROVE2_AN102"/> + <symbolicName propertyId="p003.symbolic_name" value="ARDUINO_A1"/> + <symbolicName propertyId="p004.symbolic_name" value="ARDUINO_A0_MIKROBUS_AN000"/> + <symbolicName propertyId="p005.symbolic_name" value="GROVE2_AN001"/> + <symbolicName propertyId="p006.symbolic_name" value="PMOD1_IRQ11"/> + <symbolicName propertyId="p007.symbolic_name" value="ARDUINO_A004"/> + <symbolicName propertyId="p008.symbolic_name" value="USER_S2"/> + <symbolicName propertyId="p009.symbolic_name" value="SW1"/> + <symbolicName propertyId="p010.symbolic_name" value="MIKROBUS_IRQ14"/> + <symbolicName propertyId="p014.symbolic_name" value="ARDUINO_A4"/> + <symbolicName propertyId="p015.symbolic_name" value="ARDUINO_A5"/> + <symbolicName propertyId="p100.symbolic_name" value="OSPI_DQ0"/> + <symbolicName propertyId="p101.symbolic_name" value="OSPI_DQ3"/> + <symbolicName propertyId="p102.symbolic_name" value="OSPI_DQ4"/> + <symbolicName propertyId="p103.symbolic_name" value="OSPI_DQ2"/> + <symbolicName propertyId="p104.symbolic_name" value="OSPI_CS"/> + <symbolicName propertyId="p105.symbolic_name" value="OSPI_INT"/> + <symbolicName propertyId="p106.symbolic_name" value="OSPI_RESET"/> + <symbolicName propertyId="p107.symbolic_name" value="LED3"/> + <symbolicName propertyId="p112.symbolic_name" value="ETH_A_RMII_RMII_RXDV"/> + <symbolicName propertyId="p114.symbolic_name" value="ETH_A_LINKSTA"/> + <symbolicName propertyId="p115.symbolic_name" value="MPLX_CTRL"/> + <symbolicName propertyId="p200.symbolic_name" value="NMI"/> + <symbolicName propertyId="p201.symbolic_name" value="MD"/> + <symbolicName propertyId="p207.symbolic_name" value="CAN_STB"/> + <symbolicName propertyId="p208.symbolic_name" value="TDI"/> + <symbolicName propertyId="p209.symbolic_name" value="TDO"/> + <symbolicName propertyId="p210.symbolic_name" value="SWDIO"/> + <symbolicName propertyId="p211.symbolic_name" value="SWCLK"/> + <symbolicName propertyId="p212.symbolic_name" value="EXTAL"/> + <symbolicName propertyId="p213.symbolic_name" value="XTAL"/> + <symbolicName propertyId="p300.symbolic_name" value="ETH_A_RXER"/> + <symbolicName propertyId="p301.symbolic_name" value="ETH_A_RXD1"/> + <symbolicName propertyId="p302.symbolic_name" value="ETH_A_RXD0"/> + <symbolicName propertyId="p303.symbolic_name" value="ETH_A_REFCLK"/> + <symbolicName propertyId="p304.symbolic_name" value="ETH_A_TXD0"/> + <symbolicName propertyId="p305.symbolic_name" value="ETH_A_TXD1"/> + <symbolicName propertyId="p306.symbolic_name" value="ETH_A_TXEN"/> + <symbolicName propertyId="p307.symbolic_name" value="ETH_A_MDIO"/> + <symbolicName propertyId="p308.symbolic_name" value="ETH_A_MDC"/> + <symbolicName propertyId="p309.symbolic_name" value="ARDUINO_D0_MIKROBUS_RXD3"/> + <symbolicName propertyId="p310.symbolic_name" value="ARDUINO_D1_MIKROBUS_TXD3"/> + <symbolicName propertyId="p311.symbolic_name" value="CAN_RXD"/> + <symbolicName propertyId="p312.symbolic_name" value="CAN_TXD"/> + <symbolicName propertyId="p400.symbolic_name" value="I3C_SCL0_ARDUINO_MIKROBUS_PMOD1_3_qwiic"/> + <symbolicName propertyId="p401.symbolic_name" value="I3C_SDA0_ARDUINO_MIKROBUS_PMOD1_4_qwiic"/> + <symbolicName propertyId="p402.symbolic_name" value="ETH_B_MDIO"/> + <symbolicName propertyId="p403.symbolic_name" value="ETH_B_LINKSTA"/> + <symbolicName propertyId="p404.symbolic_name" value="ETH_B_RST_N"/> + <symbolicName propertyId="p405.symbolic_name" value="ETH_B_TXEN"/> + <symbolicName propertyId="p406.symbolic_name" value="ETH_B_TXD1"/> + <symbolicName propertyId="p407.symbolic_name" value="USBFS_VBUS"/> + <symbolicName propertyId="p408.symbolic_name" value="USBHS_VBUSEN"/> + <symbolicName propertyId="p409.symbolic_name" value="USBHS_OVRCURA"/> + <symbolicName propertyId="p410.symbolic_name" value="MISOB_B_ARDUINO_MIKROBUS"/> + <symbolicName propertyId="p411.symbolic_name" value="MOSIB_B_ARDUINO_MIKROBUS"/> + <symbolicName propertyId="p412.symbolic_name" value="RSPCKB_B_ARDUINO_MIKROBUS"/> + <symbolicName propertyId="p413.symbolic_name" value="SSLB0_B_ARDUINO_D10_MIKROBUS"/> + <symbolicName propertyId="p414.symbolic_name" value="LED2"/> + <symbolicName propertyId="p500.symbolic_name" value="USBFS_VBUS_EN"/> + <symbolicName propertyId="p501.symbolic_name" value="USBFS_OVERCURA"/> + <symbolicName propertyId="p502.symbolic_name" value="MIKROBUS_RESET"/> + <symbolicName propertyId="p508.symbolic_name" value="PMOD2_7_IRQ1"/> + <symbolicName propertyId="p511.symbolic_name" value="GROVE2_IIC_SDA1"/> + <symbolicName propertyId="p512.symbolic_name" value="GROVE2_IIC_SCL1"/> + <symbolicName propertyId="p600.symbolic_name" value="LED1"/> + <symbolicName propertyId="p601.symbolic_name" value="ARDUINO_D5"/> + <symbolicName propertyId="p602.symbolic_name" value="ARDUINO_D6"/> + <symbolicName propertyId="p603.symbolic_name" value="ARDUINO_D9"/> + <symbolicName propertyId="p609.symbolic_name" value="PMOD1_3_MISO0_RXD0_SCL0"/> + <symbolicName propertyId="p610.symbolic_name" value="PMOD1_2_MOSI0_TXD0"/> + <symbolicName propertyId="p611.symbolic_name" value="PMOD1_4_SCK0"/> + <symbolicName propertyId="p612.symbolic_name" value="PMOD1_1_SSL0_CTS_RTS"/> + <symbolicName propertyId="p613.symbolic_name" value="PMOD1_1_CTS0"/> + <symbolicName propertyId="p614.symbolic_name" value="PMOD1_9_GPIO"/> + <symbolicName propertyId="p615.symbolic_name" value="PMOD1_10_GPIO"/> + <symbolicName propertyId="p700.symbolic_name" value="ETH_B_TXD0"/> + <symbolicName propertyId="p701.symbolic_name" value="ETH_B_REFCLK"/> + <symbolicName propertyId="p702.symbolic_name" value="ETH_B_RXD0"/> + <symbolicName propertyId="p703.symbolic_name" value="ETH_B_RXD1"/> + <symbolicName propertyId="p704.symbolic_name" value="ETH_B_RXER"/> + <symbolicName propertyId="p705.symbolic_name" value="ETH_B_RMII_RXDV"/> + <symbolicName propertyId="p711.symbolic_name" value="I3C_SDA0_PULLUP"/> + <symbolicName propertyId="p800.symbolic_name" value="OSPI_DQ5"/> + <symbolicName propertyId="p801.symbolic_name" value="OSPI_DS"/> + <symbolicName propertyId="p802.symbolic_name" value="OSPI_DQ6"/> + <symbolicName propertyId="p803.symbolic_name" value="OSPI_DQ1"/> + <symbolicName propertyId="p804.symbolic_name" value="OSPI_DQ7"/> + <symbolicName propertyId="p808.symbolic_name" value="OSPI_CK"/> + <symbolicName propertyId="p809.symbolic_name" value="PMOD2_8_RESET"/> + <symbolicName propertyId="p810.symbolic_name" value="PMOD2_9_GPIO"/> + <symbolicName propertyId="p811.symbolic_name" value="PMOD2_10_GPIO"/> + <symbolicName propertyId="p812.symbolic_name" value="ARDUINO_RESET"/> + <symbolicName propertyId="p814.symbolic_name" value="USBFS_P"/> + <symbolicName propertyId="p815.symbolic_name" value="USBFS_N"/> + <symbolicName propertyId="p905.symbolic_name" value="ARDUINO_D4"/> + <symbolicName propertyId="p906.symbolic_name" value="ARDUINO_D2"/> + <symbolicName propertyId="p907.symbolic_name" value="ARDUINO_D3_MIKROBUS_GTIOC13A"/> + <symbolicName propertyId="p908.symbolic_name" value="ARDUINO_D7"/> + <symbolicName propertyId="p909.symbolic_name" value="ARDUINO_D8"/> + <symbolicName propertyId="pa02.symbolic_name" value="PMOD2_3_MISO2_RXD2"/> + <symbolicName propertyId="pa03.symbolic_name" value="PMOD2_2_MOSI2_TXD2"/> + <symbolicName propertyId="pa04.symbolic_name" value="PMOD2_4_SCK2"/> + <symbolicName propertyId="pa05.symbolic_name" value="PMOD2_1_CTS_RTS_SSL2"/> + <symbolicName propertyId="pa06.symbolic_name" value="PMOD2_1_CTS2"/> + <symbolicName propertyId="pa08.symbolic_name" value="PMOD1_8_RESET"/> + <symbolicName propertyId="pa14.symbolic_name" value="JLOB_COMS_TX"/> + <symbolicName propertyId="pa15.symbolic_name" value="JLOB_COMS_RX"/> + <symbolicName propertyId="pb00.symbolic_name" value="I3C_SCL0_PULLUP"/> + <symbolicName propertyId="pb01.symbolic_name" value="USBHS_VBUS"/> + <pincfg active="true" name="RA8M1 EK" selected="true" symbol="g_bsp_pin_cfg"> + <configSetting altId="adc0.an000.p004" configurationId="adc0.an000"/> + <configSetting altId="adc0.an001.p005" configurationId="adc0.an001"/> + <configSetting altId="adc0.an004.p007" configurationId="adc0.an004"/> + <configSetting altId="adc0.an007.p014" configurationId="adc0.an007"/> + <configSetting altId="adc0.mode.custom.free" configurationId="adc0.mode"/> + <configSetting altId="adc1.an102.p002" configurationId="adc1.an102"/> + <configSetting altId="adc1.an104.p003" configurationId="adc1.an104"/> + <configSetting altId="adc1.an105.p015" configurationId="adc1.an105"/> + <configSetting altId="adc1.an106.p011" configurationId="adc1.an106"/> + <configSetting altId="adc1.mode.custom.free" configurationId="adc1.mode"/> + <configSetting altId="ether_rmii.pairing.a" configurationId="ether_rmii.pairing"/> + <configSetting altId="iic1.mode.enabled.a" configurationId="iic1.mode"/> + <configSetting altId="iic1.scl1.p512" configurationId="iic1.scl1"/> + <configSetting altId="iic1.sda1.p511" configurationId="iic1.sda1"/> + <configSetting altId="irq12.irq12_dash_ds.p008" configurationId="irq12.irq12_dash_ds"/> + <configSetting altId="irq12.mode.custom.free" configurationId="irq12.mode"/> + <configSetting altId="irq13.irq13_dash_ds.p009" configurationId="irq13.irq13_dash_ds"/> + <configSetting altId="irq13.mode.custom.free" configurationId="irq13.mode"/> + <configSetting altId="irq9.mode.custom.free" configurationId="irq9.mode"/> + <configSetting altId="jtag_fslash_swd.mode.swd.free" configurationId="jtag_fslash_swd.mode"/> + <configSetting altId="jtag_fslash_swd.swclk.p211" configurationId="jtag_fslash_swd.swclk"/> + <configSetting altId="jtag_fslash_swd.swdio.p210" configurationId="jtag_fslash_swd.swdio"/> + <configSetting altId="ospi.mode.custom.free" configurationId="ospi.mode"/> + <configSetting altId="ospi.om_cs1.p104" configurationId="ospi.om_cs1"/> + <configSetting altId="ospi.om_dqs.p801" configurationId="ospi.om_dqs"/> + <configSetting altId="ospi.om_ecsint1.p105" configurationId="ospi.om_ecsint1"/> + <configSetting altId="ospi.om_reset.p106" configurationId="ospi.om_reset"/> + <configSetting altId="ospi.om_sclk.p808" configurationId="ospi.om_sclk"/> + <configSetting altId="ospi.om_sio0.p100" configurationId="ospi.om_sio0"/> + <configSetting altId="ospi.om_sio1.p803" configurationId="ospi.om_sio1"/> + <configSetting altId="ospi.om_sio2.p103" configurationId="ospi.om_sio2"/> + <configSetting altId="ospi.om_sio3.p101" configurationId="ospi.om_sio3"/> + <configSetting altId="ospi.om_sio4.p102" configurationId="ospi.om_sio4"/> + <configSetting altId="ospi.om_sio5.p800" configurationId="ospi.om_sio5"/> + <configSetting altId="ospi.om_sio6.p802" configurationId="ospi.om_sio6"/> + <configSetting altId="ospi.om_sio7.p804" configurationId="ospi.om_sio7"/> + <configSetting altId="p000.input" configurationId="p000"/> + <configSetting altId="p000.gpio_mode.gpio_mode_in" configurationId="p000.gpio_mode"/> + <configSetting altId="p002.adc1.an102" configurationId="p002"/> + <configSetting altId="p002.gpio_mode.gpio_mode_an" configurationId="p002.gpio_mode"/> + <configSetting altId="p003.adc1.an104" configurationId="p003"/> + <configSetting altId="p003.gpio_mode.gpio_mode_an" configurationId="p003.gpio_mode"/> + <configSetting altId="p004.adc0.an000" configurationId="p004"/> + <configSetting altId="p004.gpio_mode.gpio_mode_an" configurationId="p004.gpio_mode"/> + <configSetting altId="p005.adc0.an001" configurationId="p005"/> + <configSetting altId="p005.gpio_mode.gpio_mode_an" configurationId="p005.gpio_mode"/> + <configSetting altId="p007.adc0.an004" configurationId="p007"/> + <configSetting altId="p007.gpio_mode.gpio_mode_an" configurationId="p007.gpio_mode"/> + <configSetting altId="p008.irq12.irq12_dash_ds" configurationId="p008"/> + <configSetting altId="p008.gpio_irq.gpio_irq_enabled" configurationId="p008.gpio_irq"/> + <configSetting altId="p008.gpio_mode.gpio_mode_irq" configurationId="p008.gpio_mode"/> + <configSetting altId="p009.irq13.irq13_dash_ds" configurationId="p009"/> + <configSetting altId="p009.gpio_irq.gpio_irq_enabled" configurationId="p009.gpio_irq"/> + <configSetting altId="p009.gpio_mode.gpio_mode_irq" configurationId="p009.gpio_mode"/> + <configSetting altId="p011.adc1.an106" configurationId="p011"/> + <configSetting altId="p011.gpio_mode.gpio_mode_an" configurationId="p011.gpio_mode"/> + <configSetting altId="p014.adc0.an007" configurationId="p014"/> + <configSetting altId="p014.gpio_mode.gpio_mode_an" configurationId="p014.gpio_mode"/> + <configSetting altId="p015.adc1.an105" configurationId="p015"/> + <configSetting altId="p015.gpio_mode.gpio_mode_an" configurationId="p015.gpio_mode"/> + <configSetting altId="p100.ospi.om_sio0" configurationId="p100"/> + <configSetting altId="p100.gpio_speed.gpio_speed_hh" configurationId="p100.gpio_drivecapacity"/> + <configSetting altId="p100.gpio_mode.gpio_mode_peripheral" configurationId="p100.gpio_mode"/> + <configSetting altId="p101.ospi.om_sio3" configurationId="p101"/> + <configSetting altId="p101.gpio_speed.gpio_speed_hh" configurationId="p101.gpio_drivecapacity"/> + <configSetting altId="p101.gpio_mode.gpio_mode_peripheral" configurationId="p101.gpio_mode"/> + <configSetting altId="p102.ospi.om_sio4" configurationId="p102"/> + <configSetting altId="p102.gpio_speed.gpio_speed_hh" configurationId="p102.gpio_drivecapacity"/> + <configSetting altId="p102.gpio_mode.gpio_mode_peripheral" configurationId="p102.gpio_mode"/> + <configSetting altId="p103.ospi.om_sio2" configurationId="p103"/> + <configSetting altId="p103.gpio_speed.gpio_speed_hh" configurationId="p103.gpio_drivecapacity"/> + <configSetting altId="p103.gpio_mode.gpio_mode_peripheral" configurationId="p103.gpio_mode"/> + <configSetting altId="p104.ospi.om_cs1" configurationId="p104"/> + <configSetting altId="p104.gpio_speed.gpio_speed_h" configurationId="p104.gpio_drivecapacity"/> + <configSetting altId="p104.gpio_mode.gpio_mode_peripheral" configurationId="p104.gpio_mode"/> + <configSetting altId="p105.ospi.om_ecsint1" configurationId="p105"/> + <configSetting altId="p105.gpio_mode.gpio_mode_peripheral" configurationId="p105.gpio_mode"/> + <configSetting altId="p106.ospi.om_reset" configurationId="p106"/> + <configSetting altId="p106.gpio_mode.gpio_mode_peripheral" configurationId="p106.gpio_mode"/> + <configSetting altId="p107.output.low" configurationId="p107"/> + <configSetting altId="p107.gpio_mode.gpio_mode_out.low" configurationId="p107.gpio_mode"/> + <configSetting altId="p209.trace.traceswo" configurationId="p209"/> + <configSetting altId="p209.gpio_mode.gpio_mode_peripheral" configurationId="p209.gpio_mode"/> + <configSetting altId="p210.jtag_fslash_swd.swdio" configurationId="p210"/> + <configSetting altId="p210.gpio_mode.gpio_mode_peripheral" configurationId="p210.gpio_mode"/> + <configSetting altId="p211.jtag_fslash_swd.swclk" configurationId="p211"/> + <configSetting altId="p211.gpio_mode.gpio_mode_peripheral" configurationId="p211.gpio_mode"/> + <configSetting altId="p304.trace.tdata3" configurationId="p304"/> + <configSetting altId="p304.gpio_mode.gpio_mode_peripheral" configurationId="p304.gpio_mode"/> + <configSetting altId="p305.trace.tdata2" configurationId="p305"/> + <configSetting altId="p305.gpio_mode.gpio_mode_peripheral" configurationId="p305.gpio_mode"/> + <configSetting altId="p306.trace.tdata1" configurationId="p306"/> + <configSetting altId="p306.gpio_mode.gpio_mode_peripheral" configurationId="p306.gpio_mode"/> + <configSetting altId="p307.trace.tdata0" configurationId="p307"/> + <configSetting altId="p307.gpio_mode.gpio_mode_peripheral" configurationId="p307.gpio_mode"/> + <configSetting altId="p308.trace.tclk" configurationId="p308"/> + <configSetting altId="p308.gpio_mode.gpio_mode_peripheral" configurationId="p308.gpio_mode"/> + <configSetting altId="p407.usbfs.usb_vbus" configurationId="p407"/> + <configSetting altId="p407.gpio_mode.gpio_mode_peripheral" configurationId="p407.gpio_mode"/> + <configSetting altId="p408.usbhs.usbhs_vbusen" configurationId="p408"/> + <configSetting altId="p408.gpio_mode.gpio_mode_peripheral" configurationId="p408.gpio_mode"/> + <configSetting altId="p409.usbhs.usbhs_ovrcura" configurationId="p409"/> + <configSetting altId="p409.gpio_mode.gpio_mode_peripheral" configurationId="p409.gpio_mode"/> + <configSetting altId="p410.spi1.miso1" configurationId="p410"/> + <configSetting altId="p410.gpio_speed.gpio_speed_h" configurationId="p410.gpio_drivecapacity"/> + <configSetting altId="p410.gpio_mode.gpio_mode_peripheral" configurationId="p410.gpio_mode"/> + <configSetting altId="p411.spi1.mosi1" configurationId="p411"/> + <configSetting altId="p411.gpio_speed.gpio_speed_h" configurationId="p411.gpio_drivecapacity"/> + <configSetting altId="p411.gpio_mode.gpio_mode_peripheral" configurationId="p411.gpio_mode"/> + <configSetting altId="p412.spi1.rspck1" configurationId="p412"/> + <configSetting altId="p412.gpio_speed.gpio_speed_h" configurationId="p412.gpio_drivecapacity"/> + <configSetting altId="p412.gpio_mode.gpio_mode_peripheral" configurationId="p412.gpio_mode"/> + <configSetting altId="p413.spi1.sslb0" configurationId="p413"/> + <configSetting altId="p413.gpio_speed.gpio_speed_h" configurationId="p413.gpio_drivecapacity"/> + <configSetting altId="p413.gpio_mode.gpio_mode_peripheral" configurationId="p413.gpio_mode"/> + <configSetting altId="p414.output.low" configurationId="p414"/> + <configSetting altId="p414.gpio_mode.gpio_mode_out.low" configurationId="p414.gpio_mode"/> + <configSetting altId="p500.usbfs.usb_vbusen" configurationId="p500"/> + <configSetting altId="p500.gpio_mode.gpio_mode_peripheral" configurationId="p500.gpio_mode"/> + <configSetting altId="p501.usbfs.usb_ovrcura" configurationId="p501"/> + <configSetting altId="p501.gpio_mode.gpio_mode_peripheral" configurationId="p501.gpio_mode"/> + <configSetting altId="p511.iic1.sda1" configurationId="p511"/> + <configSetting altId="p511.gpio_speed.gpio_speed_m" configurationId="p511.gpio_drivecapacity"/> + <configSetting altId="p511.gpio_mode.gpio_mode_peripheral" configurationId="p511.gpio_mode"/> + <configSetting altId="p512.iic1.scl1" configurationId="p512"/> + <configSetting altId="p512.gpio_speed.gpio_speed_m" configurationId="p512.gpio_drivecapacity"/> + <configSetting altId="p512.gpio_mode.gpio_mode_peripheral" configurationId="p512.gpio_mode"/> + <configSetting altId="p600.output.low" configurationId="p600"/> + <configSetting altId="p600.gpio_mode.gpio_mode_out.low" configurationId="p600.gpio_mode"/> + <configSetting altId="p800.ospi.om_sio5" configurationId="p800"/> + <configSetting altId="p800.gpio_speed.gpio_speed_hh" configurationId="p800.gpio_drivecapacity"/> + <configSetting altId="p800.gpio_mode.gpio_mode_peripheral" configurationId="p800.gpio_mode"/> + <configSetting altId="p801.ospi.om_dqs" configurationId="p801"/> + <configSetting altId="p801.gpio_speed.gpio_speed_hh" configurationId="p801.gpio_drivecapacity"/> + <configSetting altId="p801.gpio_mode.gpio_mode_peripheral" configurationId="p801.gpio_mode"/> + <configSetting altId="p802.ospi.om_sio6" configurationId="p802"/> + <configSetting altId="p802.gpio_speed.gpio_speed_hh" configurationId="p802.gpio_drivecapacity"/> + <configSetting altId="p802.gpio_mode.gpio_mode_peripheral" configurationId="p802.gpio_mode"/> + <configSetting altId="p803.ospi.om_sio1" configurationId="p803"/> + <configSetting altId="p803.gpio_speed.gpio_speed_hh" configurationId="p803.gpio_drivecapacity"/> + <configSetting altId="p803.gpio_mode.gpio_mode_peripheral" configurationId="p803.gpio_mode"/> + <configSetting altId="p804.ospi.om_sio7" configurationId="p804"/> + <configSetting altId="p804.gpio_speed.gpio_speed_hh" configurationId="p804.gpio_drivecapacity"/> + <configSetting altId="p804.gpio_mode.gpio_mode_peripheral" configurationId="p804.gpio_mode"/> + <configSetting altId="p808.ospi.om_sclk" configurationId="p808"/> + <configSetting altId="p808.gpio_speed.gpio_speed_hh" configurationId="p808.gpio_drivecapacity"/> + <configSetting altId="p808.gpio_mode.gpio_mode_peripheral" configurationId="p808.gpio_mode"/> + <configSetting altId="p809.output.low" configurationId="p809"/> + <configSetting altId="p809.gpio_mode.gpio_mode_out.low" configurationId="p809.gpio_mode"/> + <configSetting altId="p814.usbfs.usb_dp" configurationId="p814"/> + <configSetting altId="p814.gpio_mode.gpio_mode_peripheral" configurationId="p814.gpio_mode"/> + <configSetting altId="p815.usbfs.usb_dm" configurationId="p815"/> + <configSetting altId="p815.gpio_mode.gpio_mode_peripheral" configurationId="p815.gpio_mode"/> + <configSetting altId="pa02.sci2.rxd2" configurationId="pa02"/> + <configSetting altId="pa02.gpio_speed.gpio_speed_h" configurationId="pa02.gpio_drivecapacity"/> + <configSetting altId="pa02.gpio_mode.gpio_mode_peripheral" configurationId="pa02.gpio_mode"/> + <configSetting altId="pa03.sci2.txd2" configurationId="pa03"/> + <configSetting altId="pa03.gpio_speed.gpio_speed_h" configurationId="pa03.gpio_drivecapacity"/> + <configSetting altId="pa03.gpio_mode.gpio_mode_peripheral" configurationId="pa03.gpio_mode"/> + <configSetting altId="pa04.sci2.sck2" configurationId="pa04"/> + <configSetting altId="pa04.gpio_speed.gpio_speed_h" configurationId="pa04.gpio_drivecapacity"/> + <configSetting altId="pa04.gpio_mode.gpio_mode_peripheral" configurationId="pa04.gpio_mode"/> + <configSetting altId="pa05.sci2.cts_rts2" configurationId="pa05"/> + <configSetting altId="pa05.gpio_speed.gpio_speed_h" configurationId="pa05.gpio_drivecapacity"/> + <configSetting altId="pa05.gpio_mode.gpio_mode_peripheral" configurationId="pa05.gpio_mode"/> + <configSetting altId="pa06.input" configurationId="pa06"/> + <configSetting altId="pa06.gpio_mode.gpio_mode_in" configurationId="pa06.gpio_mode"/> + <configSetting altId="pa14.sci9.txd9" configurationId="pa14"/> + <configSetting altId="pa14.gpio_speed.gpio_speed_h" configurationId="pa14.gpio_drivecapacity"/> + <configSetting altId="pa14.gpio_mode.gpio_mode_peripheral" configurationId="pa14.gpio_mode"/> + <configSetting altId="pa15.sci9.rxd9" configurationId="pa15"/> + <configSetting altId="pa15.gpio_speed.gpio_speed_h" configurationId="pa15.gpio_drivecapacity"/> + <configSetting altId="pa15.gpio_mode.gpio_mode_peripheral" configurationId="pa15.gpio_mode"/> + <configSetting altId="pb01.usbhs.usbhs_vbus" configurationId="pb01"/> + <configSetting altId="pb01.gpio_speed.gpio_speed_h" configurationId="pb01.gpio_drivecapacity"/> + <configSetting altId="pb01.gpio_mode.gpio_mode_peripheral" configurationId="pb01.gpio_mode"/> + <configSetting altId="sci0.mode.custom.free" configurationId="sci0.mode"/> + <configSetting altId="sci1.mode.custom.free" configurationId="sci1.mode"/> + <configSetting altId="sci2.cts_rts2.pa05" configurationId="sci2.cts_rts2"/> + <configSetting altId="sci2.mode.custom.free" configurationId="sci2.mode"/> + <configSetting altId="sci2.rxd2.pa02" configurationId="sci2.rxd2"/> + <configSetting altId="sci2.sck2.pa04" configurationId="sci2.sck2"/> + <configSetting altId="sci2.txd2.pa03" configurationId="sci2.txd2"/> + <configSetting altId="sci4.mode.custom.free" configurationId="sci4.mode"/> + <configSetting altId="sci9.mode.custom.free" configurationId="sci9.mode"/> + <configSetting altId="sci9.rxd9.pa15" configurationId="sci9.rxd9"/> + <configSetting altId="sci9.txd9.pa14" configurationId="sci9.txd9"/> + <configSetting altId="spi1.miso1.p410" configurationId="spi1.miso1"/> + <configSetting altId="spi1.mode.custom.free" configurationId="spi1.mode"/> + <configSetting altId="spi1.mosi1.p411" configurationId="spi1.mosi1"/> + <configSetting altId="spi1.rspck1.p412" configurationId="spi1.rspck1"/> + <configSetting altId="spi1.sslb0.p413" configurationId="spi1.sslb0"/> + <configSetting altId="system.mode.custom.free" configurationId="system.mode"/> + <configSetting altId="trace.mode.custom.free" configurationId="trace.mode"/> + <configSetting altId="trace.tclk.p308" configurationId="trace.tclk"/> + <configSetting altId="trace.tdata0.p307" configurationId="trace.tdata0"/> + <configSetting altId="trace.tdata1.p306" configurationId="trace.tdata1"/> + <configSetting altId="trace.tdata2.p305" configurationId="trace.tdata2"/> + <configSetting altId="trace.tdata3.p304" configurationId="trace.tdata3"/> + <configSetting altId="trace.traceswo.p209" configurationId="trace.traceswo"/> + <configSetting altId="usbfs.mode.custom.free" configurationId="usbfs.mode"/> + <configSetting altId="usbfs.usb_dm.p815" configurationId="usbfs.usb_dm"/> + <configSetting altId="usbfs.usb_dp.p814" configurationId="usbfs.usb_dp"/> + <configSetting altId="usbfs.usb_ovrcura.p501" configurationId="usbfs.usb_ovrcura"/> + <configSetting altId="usbfs.usb_vbus.p407" configurationId="usbfs.usb_vbus"/> + <configSetting altId="usbfs.usb_vbusen.p500" configurationId="usbfs.usb_vbusen"/> + <configSetting altId="usbhs.mode.custom.free" configurationId="usbhs.mode"/> + <configSetting altId="usbhs.usbhs_ovrcura.p409" configurationId="usbhs.usbhs_ovrcura"/> + <configSetting altId="usbhs.usbhs_vbus.pb01" configurationId="usbhs.usbhs_vbus"/> + <configSetting altId="usbhs.usbhs_vbusen.p408" configurationId="usbhs.usbhs_vbusen"/> + </pincfg> + <pincfg active="false" name="R7FA8M1AHECBD.pincfg" selected="false" symbol=""> + <configSetting altId="jtag_fslash_swd.mode.jtag.free" configurationId="jtag_fslash_swd.mode"/> + <configSetting altId="jtag_fslash_swd.tck.p211" configurationId="jtag_fslash_swd.tck"/> + <configSetting altId="jtag_fslash_swd.tdi.p208" configurationId="jtag_fslash_swd.tdi"/> + <configSetting altId="jtag_fslash_swd.tdo.p209" configurationId="jtag_fslash_swd.tdo"/> + <configSetting altId="jtag_fslash_swd.tms.p210" configurationId="jtag_fslash_swd.tms"/> + <configSetting altId="p208.jtag_fslash_swd.tdi" configurationId="p208"/> + <configSetting altId="p208.gpio_mode.gpio_mode_peripheral" configurationId="p208.gpio_mode"/> + <configSetting altId="p209.jtag_fslash_swd.tdo" configurationId="p209"/> + <configSetting altId="p209.gpio_mode.gpio_mode_peripheral" configurationId="p209.gpio_mode"/> + <configSetting altId="p210.jtag_fslash_swd.tms" configurationId="p210"/> + <configSetting altId="p210.gpio_mode.gpio_mode_peripheral" configurationId="p210.gpio_mode"/> + <configSetting altId="p211.jtag_fslash_swd.tck" configurationId="p211"/> + <configSetting altId="p211.gpio_mode.gpio_mode_peripheral" configurationId="p211.gpio_mode"/> + </pincfg> + </raPinConfiguration> +</raConfiguration> diff --git a/hw/bsp/ra/boards/uno_r4/board.cmake b/hw/bsp/ra/boards/uno_r4/board.cmake index 9d59bc4f7..3aa6045be 100644 --- a/hw/bsp/ra/boards/uno_r4/board.cmake +++ b/hw/bsp/ra/boards/uno_r4/board.cmake @@ -1,13 +1,9 @@ set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra4m1) - set(JLINK_DEVICE R7FA4M1AB) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CFG_EXAMPLE_VIDEO_READONLY ) -# target_sources(${TARGET} PRIVATE) -# target_include_directories(${BOARD_TARGET} PUBLIC) endfunction() diff --git a/hw/bsp/ra/boards/uno_r4/board.h b/hw/bsp/ra/boards/uno_r4/board.h index 72abda27f..2c262bb9b 100644 --- a/hw/bsp/ra/boards/uno_r4/board.h +++ b/hw/bsp/ra/boards/uno_r4/board.h @@ -31,20 +31,8 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_01_PIN_11 // D13 -#define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_01_PIN_10 // D12 -#define BUTTON_STATE_ACTIVE 0 - -static const ioport_pin_cfg_t board_pin_cfg[] = { - {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, - {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, - // USB FS D+, D-, VBus - {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, -}; +#define LED_STATE_ON 1 +#define BUTTON_STATE_ACTIVE 0 #ifdef __cplusplus } diff --git a/hw/bsp/ra/boards/uno_r4/board.mk b/hw/bsp/ra/boards/uno_r4/board.mk index b7075eec0..f257c0000 100644 --- a/hw/bsp/ra/boards/uno_r4/board.mk +++ b/hw/bsp/ra/boards/uno_r4/board.mk @@ -1,8 +1,6 @@ CPU_CORE = cortex-m4 MCU_VARIANT = ra4m1 -LD_FILE = ${BOARD_PATH}/${BOARD}.ld - # For flash-jlink target JLINK_DEVICE = R7FA4M1AB diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index c1d1022cc..000000000 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,35 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#undef RA_NOT_DEFINED -#define BSP_CFG_RTOS (0) -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) - -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 - -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 336918800..000000000 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA4M1AB3CNE -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_QFN -#define BSP_PACKAGE_PINS (48) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index fc604eb3b..000000000 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,87 +0,0 @@ -/* generated configuration header file through renesas e2 studio */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA4M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 - #define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) -#elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) -#elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) -#define BSP_MCU_VBATT_SUPPORT (1) - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) - #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) - #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..4eef62a0e --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x800) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h index 444d32e56..444d32e56 100644 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..3f1d02b0d --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M1AB3CNE + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (262144) + #define BSP_RAM_SIZE_BYTES (32768) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_QFN + #define BSP_PACKAGE_PINS (48) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..3d482b2b6 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,84 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra4m1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA4M1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) + + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) + #define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) + #define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) + #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #endif + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + + /* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ + #if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..5440b293b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define SW1 (BSP_IO_PORT_01_PIN_10) /* active low */ +#define LED1 (BSP_IO_PORT_01_PIN_11) /* active high */ +extern const ioport_cfg_t g_bsp_pin_cfg; /* R7FA4M1AB3CNE.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h index 63618ec4b..559000a7a 100644 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h @@ -4,10 +4,10 @@ #define BSP_CFG_CLOCKS_SECURE (0) #define BSP_CFG_CLOCKS_OVERRIDE (0) #define BSP_CFG_XTAL_HZ (0) /* XTAL 0Hz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: Disabled */ #define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_4) /* PLL Div /4 */ -#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12, 0) /* PLL Mul x12 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12U,0U) /* PLL Mul x12 */ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ @@ -15,7 +15,7 @@ #define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ #define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ #define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Src: SUBCLK */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ #define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ #define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* UCLK Src: HOCO */ #endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.c b/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.h b/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include <stdint.h> +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_gen/pin_data.c b/hw/bsp/ra/boards/uno_r4/ra_gen/pin_data.c new file mode 100644 index 000000000..58262de8b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/pin_data.c @@ -0,0 +1,75 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/uno_r4/script/fsp.ld b/hw/bsp/ra/boards/uno_r4/script/fsp.ld new file mode 100644 index 000000000..605eef7d2 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/script/fsp.ld @@ -0,0 +1,769 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/uno_r4/script/memory_regions.ld b/hw/bsp/ra/boards/uno_r4/script/memory_regions.ld new file mode 100644 index 000000000..22775395c --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/script/memory_regions.ld @@ -0,0 +1,25 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x8000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x40000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x01010018; + ID_CODE_LENGTH = 0x20; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x0; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; + +/* Uno R4 has bootloader */ +FLASH_IMAGE_START = 0x4000; diff --git a/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml b/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml new file mode 100644 index 000000000..b716c8ec9 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml @@ -0,0 +1,218 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<raConfiguration version="9"> + <generalSettings> + <option key="#Board#" value="board.custom"/> + <option key="CPU" value="RA4M1"/> + <option key="Core" value="CM4"/> + <option key="#TargetName#" value="R7FA4M1AB3CNE"/> + <option key="#TargetARCHITECTURE#" value="cortex-m4"/> + <option key="#DeviceCommand#" value="R7FA4M1AB"/> + <option key="#RTOS#" value="_none"/> + <option key="#pinconfiguration#" value="R7FA4M1AB3CNE.pincfg"/> + <option key="#FSPVersion#" value="5.6.0"/> + <option key="#SELECTED_TOOLCHAIN#" value="com.renesas.cdt.managedbuild.gnuarm.toolchain."/> + </generalSettings> + <raBspConfiguration> + <config id="config.bsp.ra4m1.R7FA4M1AB3CNE"> + <property id="config.bsp.part_number" value="config.bsp.part_number.value"/> + <property id="config.bsp.rom_size_bytes" value="config.bsp.rom_size_bytes.value"/> + <property id="config.bsp.rom_size_bytes_hidden" value="262144"/> + <property id="config.bsp.ram_size_bytes" value="config.bsp.ram_size_bytes.value"/> + <property id="config.bsp.data_flash_size_bytes" value="config.bsp.data_flash_size_bytes.value"/> + <property id="config.bsp.package_style" value="config.bsp.package_style.value"/> + <property id="config.bsp.package_pins" value="config.bsp.package_pins.value"/> + <property id="config.bsp.irq_count_hidden" value="32"/> + </config> + <config id="config.bsp.ra4m1"> + <property id="config.bsp.series" value="config.bsp.series.value"/> + </config> + <config id="config.bsp.ra4m1.fsp"> + <property id="config.bsp.fsp.inline_irq_functions" value="config.bsp.common.inline_irq_functions.enabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_start_mode" value="config.bsp.fsp.OFS0.iwdt_start_mode.disabled"/> + <property id="config.bsp.fsp.OFS0.iwdt_timeout" value="config.bsp.fsp.OFS0.iwdt_timeout.2048"/> + <property id="config.bsp.fsp.OFS0.iwdt_divisor" value="config.bsp.fsp.OFS0.iwdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_end" value="config.bsp.fsp.OFS0.iwdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.iwdt_window_start" value="config.bsp.fsp.OFS0.iwdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.iwdt_reset_interrupt" value="config.bsp.fsp.OFS0.iwdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.iwdt_stop_control" value="config.bsp.fsp.OFS0.iwdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS0.wdt_start_mode" value="config.bsp.fsp.OFS0.wdt_start_mode.register"/> + <property id="config.bsp.fsp.OFS0.wdt_timeout" value="config.bsp.fsp.OFS0.wdt_timeout.16384"/> + <property id="config.bsp.fsp.OFS0.wdt_divisor" value="config.bsp.fsp.OFS0.wdt_divisor.128"/> + <property id="config.bsp.fsp.OFS0.wdt_window_end" value="config.bsp.fsp.OFS0.wdt_window_end.0"/> + <property id="config.bsp.fsp.OFS0.wdt_window_start" value="config.bsp.fsp.OFS0.wdt_window_start.100"/> + <property id="config.bsp.fsp.OFS0.wdt_reset_interrupt" value="config.bsp.fsp.OFS0.wdt_reset_interrupt.Reset"/> + <property id="config.bsp.fsp.OFS0.wdt_stop_control" value="config.bsp.fsp.OFS0.wdt_stop_control.stops"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0.start" value="config.bsp.fsp.OFS1.voltage_detection0.start.disabled"/> + <property id="config.bsp.fsp.OFS1.voltage_detection0_level" value="config.bsp.fsp.OFS1.voltage_detection0_level.190"/> + <property id="config.bsp.fsp.OFS1.hoco_osc" value="config.bsp.fsp.OFS1.hoco_osc.enabled"/> + <property id="config.bsp.low_voltage_mode" value="config.bsp.low_voltage_mode.disabled"/> + <property id="config.bsp.fsp.mpu_pc0_enable" value="config.bsp.fsp.mpu_pc0_enable.disabled"/> + <property id="config.bsp.fsp.mpu_pc0_start" value="0x00FFFFFC"/> + <property id="config.bsp.fsp.mpu_pc0_end" value="0x00FFFFFF"/> + <property id="config.bsp.fsp.mpu_pc1_enable" value="config.bsp.fsp.mpu_pc1_enable.disabled"/> + <property id="config.bsp.fsp.mpu_pc1_start" value="0x00FFFFFC"/> + <property id="config.bsp.fsp.mpu_pc1_end" value="0x00FFFFFF"/> + <property id="config.bsp.fsp.mpu_reg0_enable" value="config.bsp.fsp.mpu_reg0_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg0_start" value="0x00FFFFFC"/> + <property id="config.bsp.fsp.mpu_reg0_end" value="0x00FFFFFF"/> + <property id="config.bsp.fsp.mpu_reg1_enable" value="config.bsp.fsp.mpu_reg1_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg1_start" value="0x200FFFFC"/> + <property id="config.bsp.fsp.mpu_reg1_end" value="0x200FFFFF"/> + <property id="config.bsp.fsp.mpu_reg2_enable" value="config.bsp.fsp.mpu_reg2_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg2_start" value="0x407FFFFC"/> + <property id="config.bsp.fsp.mpu_reg2_end" value="0x407FFFFF"/> + <property id="config.bsp.fsp.mpu_reg3_enable" value="config.bsp.fsp.mpu_reg3_enable.disabled"/> + <property id="config.bsp.fsp.mpu_reg3_start" value="0x400DFFFC"/> + <property id="config.bsp.fsp.mpu_reg3_end" value="0x400DFFFF"/> + <property id="config.bsp.common.main_osc_wait" value="config.bsp.common.main_osc_wait.wait_8163"/> + <property id="config.bsp.fsp.mcu.adc.max_freq_hz" value="64000000"/> + <property id="config.bsp.fsp.mcu.sci_uart.max_baud" value="6666666"/> + <property id="config.bsp.fsp.mcu.adc.sample_and_hold" value="0"/> + <property id="config.bsp.fsp.mcu.adc.sensors_are_exclusive" value="1"/> + <property id="config.bsp.fsp.mcu.sci_spi.max_bitrate" value="12000000"/> + <property id="config.bsp.fsp.mcu.spi.max_bitrate" value="24000000"/> + <property id="config.bsp.fsp.mcu.iic_master.rate.rate_fastplus" value="0"/> + <property id="config.bsp.fsp.mcu.iic_master.fastplus_channels" value="0"/> + <property id="config.bsp.fsp.mcu.iic_slave.rate.rate_fastplus" value="0"/> + <property id="config.bsp.fsp.mcu.iic_slave.fastplus_channels" value="0x0"/> + <property id="config.bsp.fsp.mcu.sci_uart.cstpen_channels" value="0x0"/> + <property id="config.bsp.fsp.mcu.gpt.pin_count_source_channels" value="0xFFFF"/> + <property id="config.bsp.fsp.mcu.slcdc.1_4_bias_method" value="1"/> + <property id="config.bsp.common.id_mode" value="config.bsp.common.id_mode.unlocked"/> + <property id="config.bsp.common.id_code" value="FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"/> + <property id="config.bsp.common.id1" value=""/> + <property id="config.bsp.common.id2" value=""/> + <property id="config.bsp.common.id3" value=""/> + <property id="config.bsp.common.id4" value=""/> + <property id="config.bsp.common.id_fixed" value=""/> + </config> + <config id="config.bsp.ra"> + <property id="config.bsp.common.main" value="0x800"/> + <property id="config.bsp.common.heap" value="0x1000"/> + <property id="config.bsp.common.vcc" value="3300"/> + <property id="config.bsp.common.checking" value="config.bsp.common.checking.disabled"/> + <property id="config.bsp.common.assert" value="config.bsp.common.assert.none"/> + <property id="config.bsp.common.error_log" value="config.bsp.common.error_log.none"/> + <property id="config.bsp.common.soft_reset" value="config.bsp.common.soft_reset.disabled"/> + <property id="config.bsp.common.main_osc_populated" value="config.bsp.common.main_osc_populated.disabled"/> + <property id="config.bsp.common.pfs_protect" value="config.bsp.common.pfs_protect.enabled"/> + <property id="config.bsp.common.c_runtime_init" value="config.bsp.common.c_runtime_init.enabled"/> + <property id="config.bsp.common.early_init" value="config.bsp.common.early_init.disabled"/> + <property id="config.bsp.common.main_osc_clock_source" value="config.bsp.common.main_osc_clock_source.crystal"/> + <property id="config.bsp.common.subclock_populated" value="config.bsp.common.subclock_populated.disabled"/> + <property id="config.bsp.common.subclock_drive" value="config.bsp.common.subclock_drive.standard"/> + <property id="config.bsp.common.subclock_stabilization_ms" value="1000"/> + </config> + </raBspConfiguration> + <raClockConfiguration> + <node id="board.clock.xtal.freq" mul="0" option="_edit"/> + <node id="board.clock.pll.source" option="board.clock.pll.source.disabled"/> + <node id="board.clock.hoco.freq" option="board.clock.hoco.freq.48m"/> + <node id="board.clock.loco.freq" option="board.clock.loco.freq.32768"/> + <node id="board.clock.moco.freq" option="board.clock.moco.freq.8m"/> + <node id="board.clock.subclk.freq" option="board.clock.subclk.freq.32768"/> + <node id="board.clock.pll.div" option="board.clock.pll.div.4"/> + <node id="board.clock.pll.mul" option="board.clock.pll.mul.12"/> + <node id="board.clock.pll.display" option="board.clock.pll.display.value"/> + <node id="board.clock.clock.source" option="board.clock.clock.source.hoco"/> + <node id="board.clock.iclk.div" option="board.clock.iclk.div.1"/> + <node id="board.clock.iclk.display" option="board.clock.iclk.display.value"/> + <node id="board.clock.pclka.div" option="board.clock.pclka.div.1"/> + <node id="board.clock.pclka.display" option="board.clock.pclka.display.value"/> + <node id="board.clock.pclkb.div" option="board.clock.pclkb.div.2"/> + <node id="board.clock.pclkb.display" option="board.clock.pclkb.display.value"/> + <node id="board.clock.pclkc.div" option="board.clock.pclkc.div.1"/> + <node id="board.clock.pclkc.display" option="board.clock.pclkc.display.value"/> + <node id="board.clock.pclkd.div" option="board.clock.pclkd.div.1"/> + <node id="board.clock.pclkd.display" option="board.clock.pclkd.display.value"/> + <node id="board.clock.fclk.div" option="board.clock.fclk.div.2"/> + <node id="board.clock.fclk.display" option="board.clock.fclk.display.value"/> + <node id="board.clock.clkout.source" option="board.clock.clkout.source.disabled"/> + <node id="board.clock.clkout.div" option="board.clock.clkout.div.1"/> + <node id="board.clock.clkout.display" option="board.clock.clkout.display.value"/> + <node id="board.clock.uclk.source" option="board.clock.uclk.source.hoco"/> + <node id="board.clock.uclk.display" option="board.clock.clkout.display.value"/> + </raClockConfiguration> + <raComponentSelection> + <component apiversion="" class="Common" condition="" group="all" subgroup="fsp_common" variant="" vendor="Renesas" version="5.6.0"> + <description>Board Support Package Common Files</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="HAL Drivers" condition="" group="all" subgroup="r_ioport" variant="" vendor="Renesas" version="5.6.0"> + <description>I/O Port</description> + <originalPack>Renesas.RA.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="CMSIS" condition="" group="CMSIS5" subgroup="CoreM" variant="" vendor="Arm" version="6.1.0+fsp.5.6.0"> + <description>Arm CMSIS Version 6 - Core (M)</description> + <originalPack>Arm.CMSIS6.6.1.0+fsp.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="Board" subgroup="custom" variant="" vendor="Renesas" version="5.6.0"> + <description>Custom Board Support Files</description> + <originalPack>Renesas.RA_board_custom.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m1" subgroup="device" variant="R7FA4M1AB3CNE" vendor="Renesas" version="5.6.0"> + <description>Board support package for R7FA4M1AB3CNE</description> + <originalPack>Renesas.RA_mcu_ra4m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m1" subgroup="device" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA4M1</description> + <originalPack>Renesas.RA_mcu_ra4m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m1" subgroup="fsp" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA4M1 - FSP Data</description> + <originalPack>Renesas.RA_mcu_ra4m1.5.6.0.pack</originalPack> + </component> + <component apiversion="" class="BSP" condition="" group="ra4m1" subgroup="events" variant="" vendor="Renesas" version="5.6.0"> + <description>Board support package for RA4M1 - Events</description> + <originalPack>Renesas.RA_mcu_ra4m1.5.6.0.pack</originalPack> + </component> + </raComponentSelection> + <raElcConfiguration/> + <raIcuConfiguration/> + <raModuleConfiguration> + <module id="module.driver.ioport_on_ioport.0"> + <property id="module.driver.ioport.name" value="g_ioport"/> + <property id="module.driver.ioport.elc_trigger_ioport1" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport2" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport3" value="_disabled"/> + <property id="module.driver.ioport.elc_trigger_ioport4" value="_disabled"/> + <property id="module.driver.ioport.pincfg" value="g_bsp_pin_cfg"/> + </module> + <context id="_hal.0"> + <stack module="module.driver.ioport_on_ioport.0"/> + </context> + <config id="config.driver.ioport"> + <property id="config.driver.ioport.checking" value="config.driver.ioport.checking.system"/> + </config> + </raModuleConfiguration> + <raPinConfiguration> + <symbolicName propertyId="p110.symbolic_name" value="SW1"/> + <symbolicName propertyId="p111.symbolic_name" value="LED1"/> + <comment propertyId="p110.comment" value="active low"/> + <comment propertyId="p111.comment" value="active high"/> + <pincfg active="true" name="R7FA4M1AB3CNE.pincfg" selected="true" symbol="g_bsp_pin_cfg"> + <configSetting altId="debug0.mode.swd" configurationId="debug0.mode"/> + <configSetting altId="debug0.swclk.p300" configurationId="debug0.swclk"/> + <configSetting altId="debug0.swdio.p108" configurationId="debug0.swdio"/> + <configSetting altId="p108.debug0.swdio" configurationId="p108"/> + <configSetting altId="p108.gpio_mode.gpio_mode_peripheral" configurationId="p108.gpio_mode"/> + <configSetting altId="p110.input" configurationId="p110"/> + <configSetting altId="p110.gpio_mode.gpio_mode_in" configurationId="p110.gpio_mode"/> + <configSetting altId="p110.gpio_pupd.gpio_pupd_ip_up" configurationId="p110.gpio_pupd"/> + <configSetting altId="p111.output.low" configurationId="p111"/> + <configSetting altId="p111.gpio_mode.gpio_mode_out.low" configurationId="p111.gpio_mode"/> + <configSetting altId="p300.debug0.swclk" configurationId="p300"/> + <configSetting altId="p300.gpio_mode.gpio_mode_peripheral" configurationId="p300.gpio_mode"/> + <configSetting altId="p407.usbfs0.vbus" configurationId="p407"/> + <configSetting altId="p407.gpio_mode.gpio_mode_peripheral" configurationId="p407.gpio_mode"/> + <configSetting altId="p914.usbfs0.usbdp" configurationId="p914"/> + <configSetting altId="p914.gpio_mode.gpio_mode_peripheral" configurationId="p914.gpio_mode"/> + <configSetting altId="p915.usbfs0.usbdm" configurationId="p915"/> + <configSetting altId="p915.gpio_mode.gpio_mode_peripheral" configurationId="p915.gpio_mode"/> + <configSetting altId="usbfs0.mode.device" configurationId="usbfs0.mode"/> + <configSetting altId="usbfs0.usbdm.p915" configurationId="usbfs0.usbdm"/> + <configSetting altId="usbfs0.usbdp.p914" configurationId="usbfs0.usbdp"/> + <configSetting altId="usbfs0.vbus.p407" configurationId="usbfs0.vbus"/> + </pincfg> + </raPinConfiguration> +</raConfiguration> diff --git a/hw/bsp/ra/boards/uno_r4/uno_r4.ld b/hw/bsp/ra/boards/uno_r4/uno_r4.ld deleted file mode 100644 index 45f11dfb1..000000000 --- a/hw/bsp/ra/boards/uno_r4/uno_r4.ld +++ /dev/null @@ -1,25 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x8000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x40000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x01010018; -ID_CODE_LENGTH = 0x20; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x0; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -/* Uno R4 has bootloader */ -FLASH_IMAGE_START = 0x4000; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 87f7b4a22..523b6ff55 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -30,14 +30,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" #pragma GCC diagnostic ignored "-Wundef" - -// extra push due to https://github.com/renesas/fsp/pull/278 -#pragma GCC diagnostic push #endif -#include "bsp_api.h" -#include "r_ioport.h" -#include "r_ioport_api.h" +#include "common_data.h" #include "renesas.h" #ifdef __GNUC__ @@ -50,12 +45,6 @@ /* Key code for writing PRCR register. */ #define BSP_PRV_PRCR_KEY (0xA500U) -static const ioport_cfg_t family_pin_cfg = { - .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t), - .p_pin_cfg_data = board_pin_cfg, -}; -static ioport_instance_ctrl_t port_ctrl; - //--------------------------------------------------------------------+ // Vector Data //--------------------------------------------------------------------+ @@ -103,7 +92,7 @@ void board_init(void) { __enable_irq(); /* Configure pins. */ - R_IOPORT_Open(&port_ctrl, &family_pin_cfg); + R_IOPORT_Open(&IOPORT_CFG_CTRL, &IOPORT_CFG_NAME); #ifdef TRACE_ETM // TRCKCR is protected by PRCR bit0 register @@ -138,12 +127,12 @@ void board_init_after_tusb(void) { } void board_led_write(bool state) { - R_IOPORT_PinWrite(&port_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON); + R_IOPORT_PinWrite(&IOPORT_CFG_CTRL, LED1, state ? LED_STATE_ON : !LED_STATE_ON); } uint32_t board_button_read(void) { bsp_io_level_t lvl = !BUTTON_STATE_ACTIVE; - R_IOPORT_PinRead(&port_ctrl, SW1, &lvl); + R_IOPORT_PinRead(&IOPORT_CFG_CTRL, SW1, &lvl); return lvl == BUTTON_STATE_ACTIVE; } @@ -211,7 +200,6 @@ void usbfs_d1fifo_handler(void) { //------------- USB1 HighSpeed -------------// #ifdef BOARD_HAS_USB_HIGHSPEED - void usbhs_interrupt_handler(void) { IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); @@ -230,7 +218,6 @@ void usbhs_d1fifo_handler(void) { R_BSP_IrqStatusClear(irq); // TODO not used yet } - #endif //--------------------------------------------------------------------+ diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 426e1ca8f..ceb1e48bd 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -4,7 +4,7 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () -set(CMSIS_DIR ${TOP}/lib/CMSIS_5) +set(CMSIS_DIR ${TOP}/lib/CMSIS_6) set(FSP_RA ${TOP}/hw/mcu/renesas/fsp/ra/fsp) # include board specific @@ -15,6 +15,28 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS RAXXX ${MCU_VARIANT} CACHE INTERNAL "") +# ---------------------- +# Port & Speed Selection +# ---------------------- +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + +if (NOT DEFINED RHPORT_SPEED) + set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) +endif () +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) + #------------------------------------ # BOARD_TARGET #------------------------------------ @@ -32,10 +54,11 @@ function(add_board_target BOARD_TARGET) ${FSP_RA}/src/bsp/mcu/all/bsp_io.c ${FSP_RA}/src/bsp/mcu/all/bsp_irq.c ${FSP_RA}/src/bsp/mcu/all/bsp_register_protection.c - ${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c ${FSP_RA}/src/bsp/mcu/all/bsp_sbrk.c ${FSP_RA}/src/bsp/mcu/all/bsp_security.c ${FSP_RA}/src/r_ioport/r_ioport.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/common_data.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/pin_data.c ) target_compile_options(${BOARD_TARGET} PUBLIC @@ -44,8 +67,9 @@ function(add_board_target BOARD_TARGET) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg/bsp + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_cfg/fsp_cfg + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_cfg/fsp_cfg/bsp + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen ${CMSIS_DIR}/CMSIS/Core/Include ${FSP_RA}/inc ${FSP_RA}/inc/api @@ -54,22 +78,27 @@ function(add_board_target BOARD_TARGET) ${FSP_RA}/src/bsp/mcu/all ${FSP_RA}/src/bsp/mcu/${MCU_VARIANT} ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) update_board(${BOARD_TARGET}) if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script/fsp.ld) endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC # linker file "LINKER:--script=${LD_FILE_GNU}" - -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc + -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script + -Wl,--defsym=end=__bss_end__ -nostartfiles - # nanolib - --specs=nano.specs - --specs=nosys.specs + --specs=nano.specs --specs=nosys.specs ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC @@ -95,12 +124,18 @@ function(family_configure_example TARGET RTOS) # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + # Explicitly added bsp_rom_registers here, otherwise MCU can be bricked if g_bsp_rom_registers is dropped by linker + ${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c ) target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ) + target_compile_options(${TARGET} PUBLIC + -Wno-error=undef + -Wno-error=strict-prototypes + ) # # RA has custom freertos port # if (NOT TARGET freertos_kernel_port) diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index 4447e8499..6ac7c262f 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -1,42 +1,67 @@ -DEPS_SUBMODULES += hw/mcu/renesas/fsp lib/CMSIS_5 - FSP_RA = hw/mcu/renesas/fsp/ra/fsp include $(TOP)/$(BOARD_PATH)/board.mk # Don't include options setting in .bin file since it create unnecessary large file due to padding OBJCOPY_BIN_OPTION = --only-section .text --only-section .data --only-section .rodata --only-section .bss -# Default to port 0 fullspeed, board with port 1 highspeed should override this in board.mk -PORT ?= 0 +# ---------------------- +# Port & Speed Selection +# ---------------------- +RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 + +# Determine RHPORT_DEVICE_SPEED if not defined +ifndef RHPORT_DEVICE_SPEED +ifeq ($(RHPORT_DEVICE), 0) + RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif +# Determine RHPORT_HOST_SPEED if not defined +ifndef RHPORT_HOST_SPEED +ifeq ($(RHPORT_HOST), 0) + RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# -------------- +# Compiler Flags +# -------------- CFLAGS += \ - -flto \ -DCFG_TUSB_MCU=OPT_MCU_RAXXX \ - -DBOARD_TUD_RHPORT=$(PORT) \ + -DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \ + -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ + -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ + -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + +CFLAGS_GCC += \ + -flto \ -Wno-error=undef \ -Wno-error=strict-prototypes \ -Wno-error=cast-align \ -Wno-error=cast-qual \ -Wno-error=unused-but-set-variable \ -Wno-error=unused-variable \ - -nostdlib \ - -nostartfiles \ -ffreestanding -ifeq ($(PORT), 1) - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - $(info "Using PORT 1 HighSpeed") -else - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED - $(info "Using PORT 0 FullSpeed") -endif - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs +LDFLAGS_GCC += \ + -nostartfiles -nostdlib \ + -specs=nosys.specs -specs=nano.specs +# ----------------- +# Sources & Include +# ----------------- SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ src/portable/renesas/rusb2/rusb2_common.c \ + ${BOARD_PATH}/ra_gen/common_data.c \ + ${BOARD_PATH}/ra_gen/pin_data.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/startup.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/system.c \ $(FSP_RA)/src/bsp/mcu/all/bsp_clocks.c \ @@ -53,10 +78,11 @@ SRC_C += \ $(FSP_RA)/src/r_ioport/r_ioport.c \ INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(BOARD_PATH)/fsp_cfg \ - $(TOP)/$(BOARD_PATH)/fsp_cfg/bsp \ + $(TOP)/$(BOARD_PATH)/ra_cfg/fsp_cfg \ + $(TOP)/$(BOARD_PATH)/ra_cfg/fsp_cfg/bsp \ + $(TOP)/$(BOARD_PATH)/ra_gen \ + $(TOP)/lib/CMSIS_6/CMSIS/Core/Include \ $(TOP)/$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Include \ $(TOP)/$(FSP_RA)/inc \ $(TOP)/$(FSP_RA)/inc/api \ @@ -65,10 +91,11 @@ INC += \ $(TOP)/$(FSP_RA)/src/bsp/mcu/$(MCU_VARIANT) \ ifndef LD_FILE -LD_FILE = $(FAMILY_PATH)/linker/gcc/$(MCU_VARIANT).ld +LD_FILE = $(BOARD_PATH)/script/fsp.ld endif -LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc +LDFLAGS += -L$(TOP)/$(BOARD_PATH)/script +LDFLAGS += -Wl,--defsym=end=__bss_end__ # For freeRTOS port source # hack to use the port provided by renesas diff --git a/hw/bsp/ra/linker/gcc/ra2a1.ld b/hw/bsp/ra/linker/gcc/ra2a1.ld deleted file mode 100644 index 218acbb2a..000000000 --- a/hw/bsp/ra/linker/gcc/ra2a1.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x8000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x40000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x01010018; -ID_CODE_LENGTH = 0x20; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x0; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra4m1.ld b/hw/bsp/ra/linker/gcc/ra4m1.ld deleted file mode 100644 index 218acbb2a..000000000 --- a/hw/bsp/ra/linker/gcc/ra4m1.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x8000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x40000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x01010018; -ID_CODE_LENGTH = 0x20; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x0; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra4m3.ld b/hw/bsp/ra/linker/gcc/ra4m3.ld deleted file mode 100644 index 7b3a63fbe..000000000 --- a/hw/bsp/ra/linker/gcc/ra4m3.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x20000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x100000; -DATA_FLASH_START = 0x08000000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x0100A100; -OPTION_SETTING_LENGTH = 0x100; -OPTION_SETTING_S_START = 0x0100A200; -OPTION_SETTING_S_LENGTH = 0x100; -ID_CODE_START = 0x00000000; -ID_CODE_LENGTH = 0x0; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra6m1.ld b/hw/bsp/ra/linker/gcc/ra6m1.ld deleted file mode 100644 index 91d27f74c..000000000 --- a/hw/bsp/ra/linker/gcc/ra6m1.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x1FFE0000; -RAM_LENGTH = 0x40000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x80000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x0100A150; -ID_CODE_LENGTH = 0x10; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra6m5.ld b/hw/bsp/ra/linker/gcc/ra6m5.ld deleted file mode 100644 index af747fd9b..000000000 --- a/hw/bsp/ra/linker/gcc/ra6m5.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x80000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x200000; -DATA_FLASH_START = 0x08000000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x0100A100; -OPTION_SETTING_LENGTH = 0x100; -OPTION_SETTING_S_START = 0x0100A200; -OPTION_SETTING_S_LENGTH = 0x100; -ID_CODE_START = 0x00000000; -ID_CODE_LENGTH = 0x0; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x68000000; -OSPI_DEVICE_0_LENGTH = 0x8000000; -OSPI_DEVICE_1_START = 0x70000000; -OSPI_DEVICE_1_LENGTH = 0x10000000; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/vector_data.h b/hw/bsp/ra/vector_data.h index 2b3b7d837..a85d064bd 100644 --- a/hw/bsp/ra/vector_data.h +++ b/hw/bsp/ra/vector_data.h @@ -6,6 +6,10 @@ extern "C" { #endif +#if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8) +#define BOARD_HAS_USB_HIGHSPEED +#endif + /* ISR prototypes */ void usbfs_interrupt_handler(void); void usbfs_resume_handler(void); diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index d964a75d0..c9700fd9d 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -44,10 +44,6 @@ TU_ATTR_WEAK void dcd_edpt0_status_complete(uint8_t rhport, const tusb_control_r // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL -extern void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback); -#endif - enum { EDPT_CTRL_OUT = 0x00, EDPT_CTRL_IN = 0x80 diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 90f37db3e..190d6fd7f 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -127,6 +127,11 @@ void usbd_sof_enable(uint8_t rhport, sof_consumer_t consumer, bool en); bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in); void usbd_defer_func(osal_task_func_t func, void *param, bool in_isr); + +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL +void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback); +#endif + #ifdef __cplusplus } #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index dca1e4109..8b1a6af01 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -152,7 +152,7 @@ #define OPT_MCU_RX63X 1400 ///< Renesas RX63N/631 #define OPT_MCU_RX65X 1401 ///< Renesas RX65N/RX651 #define OPT_MCU_RX72N 1402 ///< Renesas RX72N -#define OPT_MCU_RAXXX 1403 ///< Renesas RAxxx families +#define OPT_MCU_RAXXX 1420 ///< Renesas RA generic // Mind Motion #define OPT_MCU_MM32F327X 1500 ///< Mind Motion MM32F327 diff --git a/tools/get_deps.py b/tools/get_deps.py index 58709414c..c8459c1f1 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -62,7 +62,7 @@ deps_optional = { 'fe9133fc513b82cc3dc62c67cb51f2339cf29ef7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', - 'd52e5a6a59b7c638da860c2bb309b6e78e752ff8', + 'edcc97d684b6f716728a60d7a6fea049d9870bd6', 'ra'], 'hw/mcu/renesas/rx': ['https://github.com/kkitayam/rx_device.git', '706b4e0cf485605c32351e2f90f5698267996023', @@ -194,13 +194,16 @@ deps_optional = { '77c4095087e5ed2c548ec9058e655d0b8757663b', 'ch32f20x'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', - '20285262657d1b482d132d20d755c8c330d55c1f', - 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x ' + '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', + 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb ' 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg ' 'tm4c '], + 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', + 'b0bbb0423b278ca632cfe1474eb227961d835fd2', + 'ra'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], |