xmc4500 ported, cdc msc example run fine

5 files changed, 161 insertions, 1 deletions

diff --git a/hw/bsp/xmc4000/family.c b/hw/bsp/xmc4000/family.c
index 8b5f82f15..bf6684736 100644
--- a/hw/bsp/xmc4000/family.c
+++ b/hw/bsp/xmc4000/family.c
@@ -30,6 +30,15 @@
 #include "bsp/board.h"
 #include "board.h"
 
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USB0_0_IRQHandler(void)
+{
+  tud_int_handler(0);
+}
+
 void board_init(void)
 {
   board_clock_init();
@@ -58,6 +67,10 @@ void board_init(void)
   // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
   NVIC_SetPriority(USB0_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
 #endif
+
+  // USB Power Enable
+  XMC_SCU_RESET_DeassertPeripheralReset(XMC_SCU_PERIPHERAL_RESET_USB0);
+  XMC_SCU_POWER_EnableUsb();
 }
 
 //--------------------------------------------------------------------+
diff --git a/hw/bsp/xmc4000/family.mk b/hw/bsp/xmc4000/family.mk
index e5b9f7b1a..0b32bdeb5 100644
--- a/hw/bsp/xmc4000/family.mk
+++ b/hw/bsp/xmc4000/family.mk
@@ -18,6 +18,8 @@ CFLAGS += \
 # mcu driver cause following warnings
 #CFLAGS += -Wno-error=shadow -Wno-error=cast-align
 
+SKIP_NANOLIB = 1
+
 SRC_C += \
 	src/portable/synopsys/dwc2/dcd_dwc2.c \
 	$(MCU_DIR)/Newlib/syscalls.c \
@@ -25,6 +27,7 @@ SRC_C += \
 	$(MCU_DIR)/XMCLib/src/xmc4_gpio.c \
 	$(MCU_DIR)/XMCLib/src/xmc4_scu.c
 
+
 SRC_S += $(MCU_DIR)/CMSIS/Infineon/COMPONENT_$(MCU_VARIANT)/Source/TOOLCHAIN_GCC_ARM/startup_$(MCU_VARIANT).S
 
 INC += \
diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c
index 3967f225e..44a5f8932 100644
--- a/src/portable/synopsys/dwc2/dcd_dwc2.c
+++ b/src/portable/synopsys/dwc2/dcd_dwc2.c
@@ -33,7 +33,7 @@
 #if TUSB_OPT_DEVICE_ENABLED && \
     ( defined(DCD_ATTR_DWC2_STM32) || \
       TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_GD32VF103) || \
-      TU_CHECK_MCU(OPT_MCU_EFM32GG, OPT_MCU_BCM2711) )
+      TU_CHECK_MCU(OPT_MCU_EFM32GG, OPT_MCU_BCM2711, OPT_MCU_XMC4000) )
 
 #include "device/dcd.h"
 #include "dwc2_type.h"
@@ -48,6 +48,8 @@
   #include "dwc2_bcm.h"
 #elif TU_CHECK_MCU(OPT_MCU_EFM32GG)
   #include "dwc2_efm32.h"
+#elif TU_CHECK_MCU(OPT_MCU_XMC4000)
+  #include "dwc2_xmc.h"
 #else
   #error "Unsupported MCUs"
 #endif
diff --git a/src/portable/synopsys/dwc2/dwc2_xmc.h b/src/portable/synopsys/dwc2/dwc2_xmc.h
new file mode 100644
index 000000000..4e6bebb01
--- /dev/null
+++ b/src/portable/synopsys/dwc2/dwc2_xmc.h
@@ -0,0 +1,87 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Rafael Silva (@perigoso)
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _DWC2_XMC_H_
+#define _DWC2_XMC_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "xmc_device.h"
+
+// XMC has custom control register before DWC registers
+#define DWC2_REG_BASE       USB0_BASE
+#define DWC2_EP_MAX         7
+#define DWC2_EP_FIFO_SIZE   2048
+
+TU_ATTR_ALWAYS_INLINE
+static inline void dwc2_dcd_int_enable(uint8_t rhport)
+{
+  (void) rhport;
+  NVIC_EnableIRQ(USB0_0_IRQn);
+}
+
+TU_ATTR_ALWAYS_INLINE
+static inline void dwc2_dcd_int_disable (uint8_t rhport)
+{
+  (void) rhport;
+  NVIC_DisableIRQ(USB0_0_IRQn);
+}
+
+static inline void dwc2_remote_wakeup_delay(void)
+{
+  // try to delay for 1 ms
+//  uint32_t count = SystemCoreClock / 1000;
+//  while ( count-- ) __NOP();
+}
+
+// MCU specific PHY init, called BEFORE core reset
+static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type)
+{
+  (void) dwc2;
+  (void) hs_phy_type;
+
+  // Enable PHY
+  //USB->ROUTE = USB_ROUTE_PHYPEN;
+}
+
+// MCU specific PHY update, it is called AFTER init() and core reset
+static inline void dwc2_phy_update(dwc2_regs_t * dwc2, uint8_t hs_phy_type)
+{
+  (void) dwc2;
+  (void) hs_phy_type;
+
+  // XMC Manual: turn around must be 5 (reset & default value)
+  // dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_TRDT_Msk) | (5u << GUSBCFG_TRDT_Pos);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/src/portable/synopsys/dwc2/hwcfg_list.md b/src/portable/synopsys/dwc2/hwcfg_list.md
index 495a30fd0..b5590da00 100644
--- a/src/portable/synopsys/dwc2/hwcfg_list.md
+++ b/src/portable/synopsys/dwc2/hwcfg_list.md
@@ -720,3 +720,58 @@ hw_cfg4->dedicated_fifos = 0
 hw_cfg4->num_dev_in_eps = 0
 hw_cfg4->dma_desc_enable = 0
 hw_cfg4->dma_dynamic = 0
+
+## XMC4500
+
+dwc2->guid = AEC000
+dwc2->gsnpsid = 4F54292A
+dwc2->ghwcfg1 = 0
+
+dwc2->ghwcfg2 = 228F5930
+hw_cfg2->op_mode = 0
+hw_cfg2->arch = 2
+hw_cfg2->point2point = 1
+hw_cfg2->hs_phy_type = 0
+hw_cfg2->fs_phy_type = 1
+hw_cfg2->num_dev_ep = 6
+hw_cfg2->num_host_ch = 13
+hw_cfg2->period_channel_support = 1
+hw_cfg2->enable_dynamic_fifo = 1
+hw_cfg2->mul_cpu_int = 0
+hw_cfg2->nperiod_tx_q_depth = 2
+hw_cfg2->host_period_tx_q_depth = 2
+hw_cfg2->dev_token_q_depth = 8
+hw_cfg2->otg_enable_ic_usb = 0
+
+dwc2->ghwcfg3 = 27A01E5
+hw_cfg3->xfer_size_width = 5
+hw_cfg3->packet_size_width = 6
+hw_cfg3->otg_enable = 1
+hw_cfg3->i2c_enable = 1
+hw_cfg3->vendor_ctrl_itf = 0
+hw_cfg3->optional_feature_removed = 0
+hw_cfg3->synch_reset = 0
+hw_cfg3->otg_adp_support = 0
+hw_cfg3->otg_enable_hsic = 0
+hw_cfg3->battery_charger_support = 0
+hw_cfg3->lpm_mode = 0
+hw_cfg3->total_fifo_size = 634
+
+dwc2->ghwcfg4 = DBF08030
+hw_cfg4->num_dev_period_in_ep = 0
+hw_cfg4->power_optimized = 1
+hw_cfg4->ahb_freq_min = 1
+hw_cfg4->hibernation = 0
+hw_cfg4->service_interval_mode = 0
+hw_cfg4->ipg_isoc_en = 0
+hw_cfg4->acg_enable = 0
+hw_cfg4->utmi_phy_data_width = 2
+hw_cfg4->dev_ctrl_ep_num = 0
+hw_cfg4->iddg_filter_enabled = 1
+hw_cfg4->vbus_valid_filter_enabled = 1
+hw_cfg4->a_valid_filter_enabled = 1
+hw_cfg4->b_valid_filter_enabled = 1
+hw_cfg4->dedicated_fifos = 1
+hw_cfg4->num_dev_in_eps = 13
+hw_cfg4->dma_desc_enable = 0
+hw_cfg4->dma_dynamic = 1