summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorhathach <[email protected]>2018-12-03 16:33:54 +0700
committerhathach <[email protected]>2018-12-03 16:33:54 +0700
commitea37c96d159a198ffb2dc8cf91660920c0a1357a (patch)
treeb1de06440df360ca975693964657393def58ffae
parentb2b1704f10e18cd7ae8a1448c299f34ca2c183c6 (diff)
remove legacy lpc11u chip driver
Diffstat
-rw-r--r--hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/history.txt35
-rw-r--r--hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/LPC11Uxx.h670
-rw-r--r--hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/power_api.h82
-rw-r--r--hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/system_LPC11Uxx.h64
-rw-r--r--hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/liblinks.xml32
-rw-r--r--hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/src/system_LPC11Uxx.c451
-rw-r--r--hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.c819
-rw-r--r--hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.h64
-rw-r--r--hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.c238
-rw-r--r--hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.h55
-rw-r--r--hw/mcu/nxp/lpc11uxx/hal_mcu/hal_lpc11uxx.c81
-rw-r--r--hw/mcu/nxp/lpc11uxx/hal_mcu/hal_mcu.h53
12 files changed, 0 insertions, 2644 deletions
diff --git a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/history.txt b/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/history.txt
deleted file mode 100644
index 577ef686a..000000000
--- a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/history.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-History of updates to CMSIS_CORE_LPC11Uxx
-===========================================
-
-18 July 2013
-------------
-CMSIS library project using ARM Cortex-M0 CMSIS files as
-supplied in ARM's CMSIS 3.20 March 2013 release, together
-with NXP's device specific files taken from old
-CMSISv2p00_LPC11Uxx project.
-
-Note files are built -Os for both Debug and Release
-
-
-History of updates to CMSISv2p00_LPC11Uxx
-=========================================
-
-2 June 2011
------------
-Updated version of core_cm0.h from ARM (V2.03, dated
-23. May 2011) - with main change being removal of
-core debug registers (which are not accessible from
-application code on Cortex-M0).
-
-8 April 2011
-------------
-Minor fix to LPC11Uxx.h to change LPC_CT32B1_BASE from
-0x40014000 to 0x40018000
-
-23 March 2011
--------------
-LPC11Uxx CMSIS 2.0 library project using ARM
-Cortex-M0 CMSIS files as supplied in ARM's CMSIS 2.0
-December 2010 release, together with device/board
-specific files from NXP.
-
diff --git a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/LPC11Uxx.h b/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/LPC11Uxx.h
deleted file mode 100644
index bc3f737aa..000000000
--- a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/LPC11Uxx.h
+++ /dev/null
@@ -1,670 +0,0 @@
-
-/****************************************************************************************************//**
- * @file LPC11Uxx.h
- *
- *
- * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File for
- * default LPC11Uxx Device Series
- *
- * @version V0.1
- * @date 21. March 2011
- *
- * @note Generated with SFDGen V2.6 Build 3j (beta) on Thursday, 17.03.2011 13:19:45
- *
- * from CMSIS SVD File 'LPC11U1x_svd.xml' Version 0.1,
- * created on Wednesday, 16.03.2011 20:30:42, last modified on Thursday, 17.03.2011 20:19:40
- *
- *******************************************************************************************************/
-
-// ################################################################################
-// Minor fix 8 April 2011 - changed LPC_CT32B1_BASE from 0x40014000 to 0x40018000
-// ################################################################################
-
-/** @addtogroup NXP
- * @{
- */
-
-/** @addtogroup LPC11Uxx
- * @{
- */
-
-#ifndef __LPC11UXX_H__
-#define __LPC11UXX_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-#if defined ( __CC_ARM )
- #pragma anon_unions
-#endif
-
- /* Interrupt Number Definition */
-
-typedef enum {
-// ------------------------- Cortex-M0 Processor Exceptions Numbers -----------------------------
- Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
- NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
- HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
- SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
- DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
- PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
- SysTick_IRQn = -1, /*!< 15 System Tick Timer */
-// --------------------------- LPC11Uxx Specific Interrupt Numbers ------------------------------
-FLEX_INT0_IRQn = 0, /*!< All I/O pins can be routed to below 8 interrupts. */
- FLEX_INT1_IRQn = 1,
- FLEX_INT2_IRQn = 2,
- FLEX_INT3_IRQn = 3,
- FLEX_INT4_IRQn = 4,
- FLEX_INT5_IRQn = 5,
- FLEX_INT6_IRQn = 6,
- FLEX_INT7_IRQn = 7,
- GINT0_IRQn = 8, /*!< Grouped Interrupt 0 */
- GINT1_IRQn = 9, /*!< Grouped Interrupt 1 */
- Reserved0_IRQn = 10, /*!< Reserved Interrupt */
- Reserved1_IRQn = 11,
- Reserved2_IRQn = 12,
- Reserved3_IRQn = 13,
- SSP1_IRQn = 14, /*!< SSP1 Interrupt */
- I2C_IRQn = 15, /*!< I2C Interrupt */
- TIMER_16_0_IRQn = 16, /*!< 16-bit Timer0 Interrupt */
- TIMER_16_1_IRQn = 17, /*!< 16-bit Timer1 Interrupt */
- TIMER_32_0_IRQn = 18, /*!< 32-bit Timer0 Interrupt */
- TIMER_32_1_IRQn = 19, /*!< 32-bit Timer1 Interrupt */
- SSP0_IRQn = 20, /*!< SSP0 Interrupt */
- UART_IRQn = 21, /*!< UART Interrupt */
- USB_IRQn = 22, /*!< USB IRQ Interrupt */
- USB_FIQn = 23, /*!< USB FIQ Interrupt */
- ADC_IRQn = 24, /*!< A/D Converter Interrupt */
- WDT_IRQn = 25, /*!< Watchdog timer Interrupt */
- BOD_IRQn = 26, /*!< Brown Out Detect(BOD) Interrupt */
- FMC_IRQn = 27, /*!< Flash Memory Controller Interrupt */
- Reserved4_IRQn = 28, /*!< Reserved Interrupt */
- Reserved5_IRQn = 29, /*!< Reserved Interrupt */
- USBWakeup_IRQn = 30, /*!< USB wakeup Interrupt */
- Reserved6_IRQn = 31, /*!< Reserved Interrupt */
-} IRQn_Type;
-
-
-/** @addtogroup Configuration_of_CMSIS
- * @{
- */
-
-/* Processor and Core Peripheral Section */ /* Configuration of the Cortex-M0 Processor and Core Peripherals */
-
-#define __MPU_PRESENT 0 /*!< MPU present or not */
-#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-/** @} */ /* End of group Configuration_of_CMSIS */
-
-#include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */
-#include "system_LPC11Uxx.h" /*!< LPC11Uxx System */
-
-/** @addtogroup Device_Peripheral_Registers
- * @{
- */
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- I2C -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x I2C-bus controller Modification date=3/16/2011 Major revision=0 Minor revision=3 (I2C)
- */
-
-typedef struct { /*!< (@ 0x40000000) I2C Structure */
- __IO uint32_t CONSET; /*!< (@ 0x40000000) I2C Control Set Register */
- __I uint32_t STAT; /*!< (@ 0x40000004) I2C Status Register */
- __IO uint32_t DAT; /*!< (@ 0x40000008) I2C Data Register. */
- __IO uint32_t ADR0; /*!< (@ 0x4000000C) I2C Slave Address Register 0 */
- __IO uint32_t SCLH; /*!< (@ 0x40000010) SCH Duty Cycle Register High Half Word */
- __IO uint32_t SCLL; /*!< (@ 0x40000014) SCL Duty Cycle Register Low Half Word */
- __IO uint32_t CONCLR; /*!< (@ 0x40000018) I2C Control Clear Register*/
- __IO uint32_t MMCTRL; /*!< (@ 0x4000001C) Monitor mode control register*/
- __IO uint32_t ADR1; /*!< (@ 0x40000020) I2C Slave Address Register 1*/
- __IO uint32_t ADR2; /*!< (@ 0x40000024) I2C Slave Address Register 2*/
- __IO uint32_t ADR3; /*!< (@ 0x40000028) I2C Slave Address Register 3*/
- __I uint32_t DATA_BUFFER; /*!< (@ 0x4000002C) Data buffer register */
-union{
- __IO uint32_t MASK[4]; /*!< (@ 0x40000030) I2C Slave address mask register */
- struct{
- __IO uint32_t MASK0;
- __IO uint32_t MASK1;
- __IO uint32_t MASK2;
- __IO uint32_t MASK3;
- };
- };
-} LPC_I2C_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- WWDT -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x Windowed Watchdog Timer (WWDT) Modification date=3/16/2011 Major revision=0 Minor revision=3 (WWDT)
- */
-
-typedef struct { /*!< (@ 0x40004000) WWDT Structure */
- __IO uint32_t MOD; /*!< (@ 0x40004000) Watchdog mode register*/
- __IO uint32_t TC; /*!< (@ 0x40004004) Watchdog timer constant register */
- __IO uint32_t FEED; /*!< (@ 0x40004008) Watchdog feed sequence register */
- __I uint32_t TV; /*!< (@ 0x4000400C) Watchdog timer value register */
- __IO uint32_t CLKSEL; /*!< (@ 0x40004010) Watchdog clock select register. */
- __IO uint32_t WARNINT; /*!< (@ 0x40004014) Watchdog Warning Interrupt compare value. */
- __IO uint32_t WINDOW; /*!< (@ 0x40004018) Watchdog Window compare value. */
-} LPC_WWDT_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- USART -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x USART Modification date=3/16/2011 Major revision=0 Minor revision=3 (USART)
- */
-
-typedef struct { /*!< (@ 0x40008000) USART Structure */
-
- union {
- __IO uint32_t DLL; /*!< (@ 0x40008000) Divisor Latch LSB. Least significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
- __O uint32_t THR; /*!< (@ 0x40008000) Transmit Holding Register. The next character to be transmitted is written here. (DLAB=0) */
- __I uint32_t RBR; /*!< (@ 0x40008000) Receiver Buffer Register. Contains the next received character to be read. (DLAB=0) */
- };
-
- union {
- __IO uint32_t IER; /*!< (@ 0x40008004) Interrupt Enable Register. Contains individual interrupt enable bits for the 7 potential USART interrupts. (DLAB=0) */
- __IO uint32_t DLM; /*!< (@ 0x40008004) Divisor Latch MSB. Most significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
- };
-
- union {
- __O uint32_t FCR; /*!< (@ 0x40008008) FIFO Control Register. Controls USART FIFO usage and modes. */
- __I uint32_t IIR; /*!< (@ 0x40008008) Interrupt ID Register. Identifies which interrupt(s) are pending. */
- };
- __IO uint32_t LCR; /*!< (@ 0x4000800C) Line Control Register. Contains controls for frame formatting and break generation. */
- __IO uint32_t MCR; /*!< (@ 0x40008010) Modem Control Register. */
- __I uint32_t LSR; /*!< (@ 0x40008014) Line Status Register. Contains flags for transmit and receive status, including line errors. */
- __I uint32_t MSR; /*!< (@ 0x40008018) Modem Status Register. */
- __IO uint32_t SCR; /*!< (@ 0x4000801C) Scratch Pad Register. Eight-bit temporary storage for software. */
- __IO uint32_t ACR; /*!< (@ 0x40008020) Auto-baud Control Register. Contains controls for the auto-baud feature. */
- __IO uint32_t ICR; /*!< (@ 0x40008024) IrDA Control Register. Enables and configures the IrDA (remote control) mode. */
- __IO uint32_t FDR; /*!< (@ 0x40008028) Fractional Divider Register. Generates a clock input for the baud rate divider. */
- __IO uint32_t OSR; /*!< (@ 0x4000802C) Oversampling Register. Controls the degree of oversampling during each bit time. */
- __IO uint32_t TER; /*!< (@ 0x40008030) Transmit Enable Register. Turns off USART transmitter for use with software flow control. */
- __I uint32_t RESERVED0[3];
- __IO uint32_t HDEN; /*!< (@ 0x40008040) Half duplex enable register. */
- __I uint32_t RESERVED1;
- __IO uint32_t SCICTRL; /*!< (@ 0x40008048) Smart Card Interface Control register. Enables and configures the Smart Card Interface feature. */
- __IO uint32_t RS485CTRL; /*!< (@ 0x4000804C) RS-485/EIA-485 Control. Contains controls to configure various aspects of RS-485/EIA-485 modes. */
- __IO uint32_t RS485ADRMATCH; /*!< (@ 0x40008050) RS-485/EIA-485 address match. Contains the address match value for RS-485/EIA-485 mode. */
- __IO uint32_t RS485DLY; /*!< (@ 0x40008054) RS-485/EIA-485 direction control delay. */
- __IO uint32_t SYNCCTRL;
-} LPC_USART_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- Timer -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x 32-bitcounter/timers CT32B0/1 Modification date=3/16/2011 Major revision=0 Minor revision=3
- */
-
-typedef struct { /*!< (@ 0x40014000) CT32B0 Structure */
- __IO uint32_t IR; /*!< (@ 0x40014000) Interrupt Register */
- __IO uint32_t TCR; /*!< (@ 0x40014004) Timer Control Register */
- __IO uint32_t TC; /*!< (@ 0x40014008) Timer Counter */
- __IO uint32_t PR; /*!< (@ 0x4001400C) Prescale Register */
- __IO uint32_t PC; /*!< (@ 0x40014010) Prescale Counter */
- __IO uint32_t MCR; /*!< (@ 0x40014014) Match Control Register */
- union {
- __IO uint32_t MR[4]; /*!< (@ 0x40014018) Match Register */
- struct{
- __IO uint32_t MR0; /*!< (@ 0x40018018) Match Register. MR0 */
- __IO uint32_t MR1; /*!< (@ 0x4001801C) Match Register. MR1 */
- __IO uint32_t MR2; /*!< (@ 0x40018020) Match Register. MR2 */
- __IO uint32_t MR3; /*!< (@ 0x40018024) Match Register. MR3 */
- };
- };
- __IO uint32_t CCR; /*!< (@ 0x40014028) Capture Control Register */
- union{
- __I uint32_t CR[4]; /*!< (@ 0x4001402C) Capture Register */
- struct{
- __I uint32_t CR0; /*!< (@ 0x4001802C) Capture Register. CR 0 */
- __I uint32_t CR1; /*!< (@ 0x40018030) Capture Register. CR 1 */
- __I uint32_t CR2; /*!< (@ 0x40018034) Capture Register. CR 2 */
- __I uint32_t CR3; /*!< (@ 0x40018038) Capture Register. CR 3 */
- };
- };
-__IO uint32_t EMR; /*!< (@ 0x4001403C) External Match Register */
- __I uint32_t RESERVED0[12];
- __IO uint32_t CTCR; /*!< (@ 0x40014070) Count Control Register */
- __IO uint32_t PWMC; /*!< (@ 0x40014074) PWM Control Register */
-} LPC_CTxxBx_Type;
-
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- ADC -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x ADC Modification date=3/16/2011 Major revision=0 Minor revision=3 (ADC)
- */
-
-typedef struct { /*!< (@ 0x4001C000) ADC Structure */
- __IO uint32_t CR; /*!< (@ 0x4001C000) A/D Control Register */
- __IO uint32_t GDR; /*!< (@ 0x4001C004) A/D Global Data Register */
- __I uint32_t RESERVED0[1];
- __IO uint32_t INTEN; /*!< (@ 0x4001C00C) A/D Interrupt Enable Register */
- union{
- __I uint32_t DR[8]; /*!< (@ 0x4001C010) A/D Channel Data Register*/
- struct{
- __IO uint32_t DR0; /*!< (@ 0x40020010) A/D Channel Data Register 0*/
- __IO uint32_t DR1; /*!< (@ 0x40020014) A/D Channel Data Register 1*/
- __IO uint32_t DR2; /*!< (@ 0x40020018) A/D Channel Data Register 2*/
- __IO uint32_t DR3; /*!< (@ 0x4002001C) A/D Channel Data Register 3*/
- __IO uint32_t DR4; /*!< (@ 0x40020020) A/D Channel Data Register 4*/
- __IO uint32_t DR5; /*!< (@ 0x40020024) A/D Channel Data Register 5*/
- __IO uint32_t DR6; /*!< (@ 0x40020028) A/D Channel Data Register 6*/
- __IO uint32_t DR7; /*!< (@ 0x4002002C) A/D Channel Data Register 7*/
- };
- };
- __I uint32_t STAT; /*!< (@ 0x4001C030) A/D Status Register. */
-} LPC_ADC_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- PMU -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x Power Management Unit (PMU) Modification date=3/16/2011 Major revision=0 Minor revision=3 (PMU)
- */
-
-typedef struct { /*!< (@ 0x40038000) PMU Structure */
- __IO uint32_t PCON; /*!< (@ 0x40038000) Power control register */
- union{
- __IO uint32_t GPREG[4]; /*!< (@ 0x40038004) General purpose register 0 */
- struct{
- __IO uint32_t GPREG0; /*!< (@ 0x40038004) General purpose register 0 */
- __IO uint32_t GPREG1; /*!< (@ 0x40038008) General purpose register 1 */
- __IO uint32_t GPREG2; /*!< (@ 0x4003800C) General purpose register 2 */
- __IO uint32_t GPREG3; /*!< (@ 0x40038010) General purpose register 3 */
- };
- };
-} LPC_PMU_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- FLASHCTRL -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x Flash programming firmware Modification date=3/17/2011 Major revision=0 Minor revision=3 (FLASHCTRL)
- */
-
-typedef struct { /*!< (@ 0x4003C000) FLASHCTRL Structure */
- __I uint32_t RESERVED0[4];
- __IO uint32_t FLASHCFG; /*!< (@ 0x4003C010) Flash memory access time configuration register */
- __I uint32_t RESERVED1[3];
- __IO uint32_t FMSSTART; /*!< (@ 0x4003C020) Signature start address register */
- __IO uint32_t FMSSTOP; /*!< (@ 0x4003C024) Signature stop-address register */
- __I uint32_t RESERVED2[1];
- __I uint32_t FMSW0; /*!< (@ 0x4003C02C) Word 0 [31:0] */
- __I uint32_t FMSW1; /*!< (@ 0x4003C030) Word 1 [63:32] */
- __I uint32_t FMSW2; /*!< (@ 0x4003C034) Word 2 [95:64] */
- __I uint32_t FMSW3; /*!< (@ 0x4003C038) Word 3 [127:96] */
- __I uint32_t RESERVED3[1001];
- __I uint32_t FMSTAT; /*!< (@ 0x4003CFE0) Signature generation status register */
- __I uint32_t RESERVED4[1];
- __IO uint32_t FMSTATCLR; /*!< (@ 0x4003CFE8) Signature generation status clear register */
-} LPC_FLASHCTRL_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- SSP0/1 -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x SSP/SPI Modification date=3/16/2011 Major revision=0 Minor revision=3 (SSP0)
- */
-
-typedef struct { /*!< (@ 0x40040000) SSP0 Structure */
- __IO uint32_t CR0; /*!< (@ 0x40040000) Control Register 0. Selects the serial clock rate, bus type, and data size. */
- __IO uint32_t CR1; /*!< (@ 0x40040004) Control Register 1. Selects master/slave and other modes. */
- __IO uint32_t DR; /*!< (@ 0x40040008) Data Register. Writes fill the transmit FIFO, and reads empty the receive FIFO. */
- __I uint32_t SR; /*!< (@ 0x4004000C) Status Register */
- __IO uint32_t CPSR; /*!< (@ 0x40040010) Clock Prescale Register */
- __IO uint32_t IMSC; /*!< (@ 0x40040014) Interrupt Mask Set and Clear Register */
- __I uint32_t RIS; /*!< (@ 0x40040018) Raw Interrupt Status Register */
- __I uint32_t MIS; /*!< (@ 0x4004001C) Masked Interrupt Status Register */
- __IO uint32_t ICR; /*!< (@ 0x40040020) SSPICR Interrupt Clear Register */
-} LPC_SSPx_Type;
-
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- IOCONFIG -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x I/O configuration Modification date=3/16/2011 Major revision=0 Minor revision=3 (IOCONFIG)
- */
-
-typedef struct { /*!< (@ 0x40044000) IOCONFIG Structure */
- __IO uint32_t RESET_PIO0_0; /*!< (@ 0x40044000) I/O configuration for pin RESET/PIO0_0 */
- __IO uint32_t PIO0_1; /*!< (@ 0x40044004) I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2/USB_FTOGGLE */
- __IO uint32_t PIO0_2; /*!< (@ 0x40044008) I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 */
- __IO uint32_t PIO0_3; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_3/USB_VBUS */
- __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4/SCL */
- __IO uint32_t PIO0_5; /*!< (@ 0x40044014) I/O configuration for pin PIO0_5/SDA */
- __IO uint32_t PIO0_6; /*!< (@ 0x40044018) I/O configuration for pin PIO0_6/USB_CONNECT/SCK0 */
- __IO uint32_t PIO0_7; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_7/CTS */
- __IO uint32_t PIO0_8; /*!< (@ 0x40044020) I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0 */
- __IO uint32_t PIO0_9; /*!< (@ 0x40044024) I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1 */
- __IO uint32_t SWCLK_PIO0_10; /*!< (@ 0x40044028) I/O configuration for pin SWCLK/PIO0_10/ SCK0/CT16B0_MAT2 */
- __IO uint32_t TDI_PIO0_11; /*!< (@ 0x4004402C) I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 */
- __IO uint32_t TMS_PIO0_12; /*!< (@ 0x40044030) I/O configuration for pin TMS/PIO0_12/AD1/CT32B1_CAP0 */
- __IO uint32_t TDO_PIO0_13; /*!< (@ 0x40044034) I/O configuration for pin TDO/PIO0_13/AD2/CT32B1_MAT0 */
- __IO uint32_t TRST_PIO0_14; /*!< (@ 0x40044038) I/O configuration for pin TRST/PIO0_14/AD3/CT32B1_MAT1 */
- __IO uint32_t SWDIO_PIO0_15; /*!< (@ 0x4004403C) I/O configuration for pin SWDIO/PIO0_15/AD4/CT32B1_MAT2 */
- __IO uint32_t PIO0_16; /*!< (@ 0x40044040) I/O configuration for pin PIO0_16/AD5/CT32B1_MAT3/ WAKEUP */
- __IO uint32_t PIO0_17; /*!< (@ 0x40044044) I/O configuration for pin PIO0_17/RTS/CT32B0_CAP0/SCLK */
- __IO uint32_t PIO0_18; /*!< (@ 0x40044048) I/O configuration for pin PIO0_18/RXD/CT32B0_MAT0 */
- __IO uint32_t PIO0_19; /*!< (@ 0x4004404C) I/O configuration for pin PIO0_19/TXD/CT32B0_MAT1 */
- __IO uint32_t PIO0_20; /*!< (@ 0x40044050) I/O configuration for pin PIO0_20/CT16B1_CAP0 */
- __IO uint32_t PIO0_21; /*!< (@ 0x40044054) I/O configuration for pin PIO0_21/CT16B1_MAT0/MOSI1 */
- __IO uint32_t PIO0_22; /*!< (@ 0x40044058) I/O configuration for pin PIO0_22/AD6/CT16B1_MAT1/MISO1 */
- __IO uint32_t PIO0_23; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_23/AD7 */
- __IO uint32_t PIO1_0; /*!< Offset: 0x060 */
- __IO uint32_t PIO1_1;
- __IO uint32_t PIO1_2;
- __IO uint32_t PIO1_3;
- __IO uint32_t PIO1_4; /*!< Offset: 0x070 */
- __IO uint32_t PIO1_5; /*!< (@ 0x40044074) I/O configuration for pin PIO1_5/CT32B1_CAP1 */
- __IO uint32_t PIO1_6;
- __IO uint32_t PIO1_7;
- __IO uint32_t PIO1_8; /*!< Offset: 0x080 */
- __IO uint32_t PIO1_9;
- __IO uint32_t PIO1_10;
- __IO uint32_t PIO1_11;
- __IO uint32_t PIO1_12; /*!< Offset: 0x090 */
- __IO uint32_t PIO1_13; /*!< (@ 0x40044094) I/O configuration for pin PIO1_13/DTR/CT16B0_MAT0/TXD */
- __IO uint32_t PIO1_14; /*!< (@ 0x40044098) I/O configuration for pin PIO1_14/DSR/CT16B0_MAT1/RXD */
- __IO uint32_t PIO1_15; /*!< (@ 0x4004409C) I/O configuration for pin PIO1_15/DCD/ CT16B0_MAT2/SCK1 */
- __IO uint32_t PIO1_16; /*!< (@ 0x400440A0) I/O configuration for pin PIO1_16/RI/CT16B0_CAP0 */
- __IO uint32_t PIO1_17;
- __IO uint32_t PIO1_18;
- __IO uint32_t PIO1_19; /*!< (@ 0x400440AC) I/O configuration for pin PIO1_19/DTR/SSEL1 */
- __IO uint32_t PIO1_20; /*!< (@ 0x400440B0) I/O configuration for pin PIO1_20/DSR/SCK1 */
- __IO uint32_t PIO1_21; /*!< (@ 0x400440B4) I/O configuration for pin PIO1_21/DCD/MISO1 */
- __IO uint32_t PIO1_22; /*!< (@ 0x400440B8) I/O configuration for pin PIO1_22/RI/MOSI1 */
- __IO uint32_t PIO1_23; /*!< (@ 0x400440BC) I/O configuration for pin PIO1_23/CT16B1_MAT1/SSEL1 */
- __IO uint32_t PIO1_24; /*!< (@ 0x400440C0) I/O configuration for pin PIO1_24/ CT32B0_MAT0 */
- __IO uint32_t PIO1_25; /*!< (@ 0x400440C4) I/O configuration for pin PIO1_25/CT32B0_MAT1 */
- __IO uint32_t PIO1_26; /*!< (@ 0x400440C8) I/O configuration for pin PIO1_26/CT32B0_MAT2/ RXD */
- __IO uint32_t PIO1_27; /*!< (@ 0x400440CC) I/O configuration for pin PIO1_27/CT32B0_MAT3/ TXD */
- __IO uint32_t PIO1_28; /*!< (@ 0x400440D0) I/O configuration for pin PIO1_28/CT32B0_CAP0/ SCLK */
- __IO uint32_t PIO1_29; /*!< (@ 0x400440D4) I/O configuration for pin PIO1_29/SCK0/ CT32B0_CAP1 */
- __IO uint32_t PIO1_30;
- __IO uint32_t PIO1_31; /*!< (@ 0x400440DC) I/O configuration for pin PIO1_31 */
-} LPC_IOCON_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- SYSCON -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x System control block Modification date=3/16/2011 Major revision=0 Minor revision=3 (SYSCON)
- */
-
-typedef struct { /*!< (@ 0x40048000) SYSCON Structure */
- __IO uint32_t SYSMEMREMAP; /*!< (@ 0x40048000) System memory remap */
- __IO uint32_t PRESETCTRL; /*!< (@ 0x40048004) Peripheral reset control */
- __IO uint32_t SYSPLLCTRL; /*!< (@ 0x40048008) System PLL control */
- __I uint32_t SYSPLLSTAT; /*!< (@ 0x4004800C) System PLL status */
- __IO uint32_t USBPLLCTRL; /*!< (@ 0x40048010) USB PLL control */
- __I uint32_t USBPLLSTAT; /*!< (@ 0x40048014) USB PLL status */
- __I uint32_t RESERVED0[2];
- __IO uint32_t SYSOSCCTRL; /*!< (@ 0x40048020) System oscillator control */
- __IO uint32_t WDTOSCCTRL; /*!< (@ 0x40048024) Watchdog oscillator control */
- __I uint32_t RESERVED1[2];
- __IO uint32_t SYSRSTSTAT; /*!< (@ 0x40048030) System reset status register */
- __I uint32_t RESERVED2[3];
- __IO uint32_t SYSPLLCLKSEL; /*!< (@ 0x40048040) System PLL clock source select */
- __IO uint32_t SYSPLLCLKUEN; /*!< (@ 0x40048044) System PLL clock source update enable */
- __IO uint32_t USBPLLCLKSEL; /*!< (@ 0x40048048) USB PLL clock source select */
- __IO uint32_t USBPLLCLKUEN; /*!< (@ 0x4004804C) USB PLL clock source update enable */
- __I uint32_t RESERVED3[8];
- __IO uint32_t MAINCLKSEL; /*!< (@ 0x40048070) Main clock source select */
- __IO uint32_t MAINCLKUEN; /*!< (@ 0x40048074) Main clock source update enable */
- __IO uint32_t SYSAHBCLKDIV; /*!< (@ 0x40048078) System clock divider */
- __I uint32_t RESERVED4[1];
- __IO uint32_t SYSAHBCLKCTRL; /*!< (@ 0x40048080) System clock control */
- __I uint32_t RESERVED5[4];
- __IO uint32_t SSP0CLKDIV; /*!< (@ 0x40048094) SSP0 clock divider */
- __IO uint32_t UARTCLKDIV; /*!< (@ 0x40048098) UART clock divider */
- __IO uint32_t SSP1CLKDIV; /*!< (@ 0x4004809C) SSP1 clock divider */
- __I uint32_t RESERVED6[8];
- __IO uint32_t USBCLKSEL; /*!< (@ 0x400480C0) USB clock source select */
- __IO uint32_t USBCLKUEN; /*!< (@ 0x400480C4) USB clock source update enable */
- __IO uint32_t USBCLKDIV; /*!< (@ 0x400480C8) USB clock source divider */
- __I uint32_t RESERVED7[5];
- __IO uint32_t CLKOUTSEL; /*!< (@ 0x400480E0) CLKOUT clock source select */
- __IO uint32_t CLKOUTUEN; /*!< (@ 0x400480E4) CLKOUT clock source update enable */
- __IO uint32_t CLKOUTDIV; /*!< (@ 0x400480E8) CLKOUT clock divider */
- __I uint32_t RESERVED8[5];
- __I uint32_t PIOPORCAP0; /*!< (@ 0x40048100) POR captured PIO status 0 */
- __I uint32_t PIOPORCAP1; /*!< (@ 0x40048104) POR captured PIO status 1 */
- __I uint32_t RESERVED9[18];
- __IO uint32_t BODCTRL; /*!< (@ 0x40048150) Brown-Out Detect */
- __IO uint32_t SYSTCKCAL; /*!< (@ 0x40048154) System tick counter calibration */
- __I uint32_t RESERVED10[6];
- __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IQR delay */
- __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */
- __IO uint32_t PINTSEL[8]; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register 0 */
- __IO uint32_t USBCLKCTRL; /*!< (@ 0x40048198) USB clock control */
- __I uint32_t USBCLKST; /*!< (@ 0x4004819C) USB clock status */
- __I uint32_t RESERVED11[25];
- __IO uint32_t STARTERP0; /*!< (@ 0x40048204) Start logic 0 interrupt wake-up enable register 0 */
- __I uint32_t RESERVED12[3];
- __IO uint32_t STARTERP1; /*!< (@ 0x40048214) Start logic 1 interrupt wake-up enable register 1 */
- __I uint32_t RESERVED13[6];
- __IO uint32_t PDSLEEPCFG; /*!< (@ 0x40048230) Power-down states in deep-sleep mode */
- __IO uint32_t PDAWAKECFG; /*!< (@ 0x40048234) Power-down states for wake-up from deep-sleep */
- __IO uint32_t PDRUNCFG; /*!< (@ 0x40048238) Power configuration register */
- __I uint32_t RESERVED14[110];
- __I uint32_t DEVICE_ID; /*!< (@ 0x400483F4) Device ID */
-} LPC_SYSCON_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- GPIO_PIN_INT -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PIN_INT)
- */
-
-typedef struct { /*!< (@ 0x4004C000) GPIO_PIN_INT Structure */
- __IO uint32_t ISEL; /*!< (@ 0x4004C000) Pin Interrupt Mode register */
- __IO uint32_t IENR; /*!< (@ 0x4004C004) Pin Interrupt Enable (Rising) register */
- __IO uint32_t SIENR; /*!< (@ 0x4004C008) Set Pin Interrupt Enable (Rising) register */
- __IO uint32_t CIENR; /*!< (@ 0x4004C00C) Clear Pin Interrupt Enable (Rising) register */
- __IO uint32_t IENF; /*!< (@ 0x4004C010) Pin Interrupt Enable Falling Edge / Active Level register */
- __IO uint32_t SIENF; /*!< (@ 0x4004C014) Set Pin Interrupt Enable Falling Edge / Active Level register */
- __IO uint32_t CIENF; /*!< (@ 0x4004C018) Clear Pin Interrupt Enable Falling Edge / Active Level address */
- __IO uint32_t RISE; /*!< (@ 0x4004C01C) Pin Interrupt Rising Edge register */
- __IO uint32_t FALL; /*!< (@ 0x4004C020) Pin Interrupt Falling Edge register */
- __IO uint32_t IST; /*!< (@ 0x4004C024) Pin Interrupt Status register */
-} LPC_GPIO_PIN_INT_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- GPIO_GROUP_INT0/1 -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_GROUP_INT0)
- */
-
-typedef struct { /*!< (@ 0x4005C000) GPIO_GROUP_INT0 Structure */
- __IO uint32_t CTRL; /*!< (@ 0x4005C000) GPIO grouped interrupt control register */
- __I uint32_t RESERVED0[7];
- __IO uint32_t PORT_POL[2]; /*!< (@ 0x4005C020) GPIO grouped interrupt port 0 polarity register */
- __I uint32_t RESERVED1[6];
- __IO uint32_t PORT_ENA[2]; /*!< (@ 0x4005C040) GPIO grouped interrupt port 0/1 enable register */
-} LPC_GPIO_GROUP_INTx_Type;
-
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- USB -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x USB2.0device controller Modification date=3/16/2011 Major revision=0 Minor revision=3 (USB)
- */
-
-typedef struct { /*!< (@ 0x40080000) USB Structure */
- __IO uint32_t DEVCMDSTAT; /*!< (@ 0x40080000) USB Device Command/Status register */
- __IO uint32_t INFO; /*!< (@ 0x40080004) USB Info register */
- __IO uint32_t EPLISTSTART; /*!< (@ 0x40080008) USB EP Command/Status List start address */
- __IO uint32_t DATABUFSTART; /*!< (@ 0x4008000C) USB Data buffer start address */
- __IO uint32_t LPM; /*!< (@ 0x40080010) Link Power Management register */
- __IO uint32_t EPSKIP; /*!< (@ 0x40080014) USB Endpoint skip */
- __IO uint32_t EPINUSE; /*!< (@ 0x40080018) USB Endpoint Buffer in use */
- __IO uint32_t EPBUFCFG; /*!< (@ 0x4008001C) USB Endpoint Buffer Configuration register */
- __IO uint32_t INTSTAT; /*!< (@ 0x40080020) USB interrupt status register */
- __IO uint32_t INTEN; /*!< (@ 0x40080024) USB interrupt enable register */
- __IO uint32_t INTSETSTAT; /*!< (@ 0x40080028) USB set interrupt status register */
- __IO uint32_t INTROUTING; /*!< (@ 0x4008002C) USB interrupt routing register */
- __I uint32_t RESERVED0[1];
- __I uint32_t EPTOGGLE; /*!< (@ 0x40080034) USB Endpoint toggle register */
-} LPC_USB_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- GPIO_PORT -----
-// ------------------------------------------------------------------------------------------------
-
-
-/**
- * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PORT)
- */
-
-typedef struct {
- union {
- struct {
- __IO uint8_t B0[32]; /*!< (@ 0x50000000) Byte pin registers port 0; pins PIO0_0 to PIO0_31 */
- __IO uint8_t B1[32]; /*!< (@ 0x50000020) Byte pin registers port 1 */
- };
- __IO uint8_t B[64]; /*!< (@ 0x50000000) Byte pin registers port 0/1 */
- };
- __I uint32_t RESERVED0[1008];
- union {
- struct {
- __IO uint32_t W0[32]; /*!< (@ 0x50001000) Word pin registers port 0 */
- __IO uint32_t W1[32]; /*!< (@ 0x50001080) Word pin registers port 1 */
- };
- __IO uint32_t W[64]; /*!< (@ 0x50001000) Word pin registers port 0/1 */
- };
- uint32_t RESERVED1[960];
- __IO uint32_t DIR[2]; /* 0x2000 */
- uint32_t RESERVED2[30];
- __IO uint32_t MASK[2]; /* 0x2080 */
- uint32_t RESERVED3[30];
- __IO uint32_t PIN[2]; /* 0x2100 */
- uint32_t RESERVED4[30];
- __IO uint32_t MPIN[2]; /* 0x2180 */
- uint32_t RESERVED5[30];
- __IO uint32_t SET[2]; /* 0x2200 */
- uint32_t RESERVED6[30];
- __O uint32_t CLR[2]; /* 0x2280 */
- uint32_t RESERVED7[30];
- __O uint32_t NOT[2]; /* 0x2300 */
-} LPC_GPIO_Type;
-
-
-#if defined ( __CC_ARM )
- #pragma no_anon_unions
-#endif
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- Peripheral memory map -----
-// ------------------------------------------------------------------------------------------------
-
-#define LPC_I2C_BASE (0x40000000)
-#define LPC_WWDT_BASE (0x40004000)
-#define LPC_USART_BASE (0x40008000)
-#define LPC_CT16B0_BASE (0x4000C000)
-#define LPC_CT16B1_BASE (0x40010000)
-#define LPC_CT32B0_BASE (0x40014000)
-#define LPC_CT32B1_BASE (0x40018000)
-#define LPC_ADC_BASE (0x4001C000)
-#define LPC_PMU_BASE (0x40038000)
-#define LPC_FLASHCTRL_BASE (0x4003C000)
-#define LPC_SSP0_BASE (0x40040000)
-#define LPC_SSP1_BASE (0x40058000)
-#define LPC_IOCON_BASE (0x40044000)
-#define LPC_SYSCON_BASE (0x40048000)
-#define LPC_GPIO_PIN_INT_BASE (0x4004C000)
-#define LPC_GPIO_GROUP_INT0_BASE (0x4005C000)
-#define LPC_GPIO_GROUP_INT1_BASE (0x40060000)
-#define LPC_USB_BASE (0x40080000)
-#define LPC_GPIO_BASE (0x50000000)
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- Peripheral declaration -----
-// ------------------------------------------------------------------------------------------------
-
-#define LPC_I2C ((LPC_I2C_Type *) LPC_I2C_BASE)
-#define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE)
-#define LPC_USART ((LPC_USART_Type *) LPC_USART_BASE)
-#define LPC_CT16B0 ((LPC_CTxxBx_Type *) LPC_CT16B0_BASE)
-#define LPC_CT16B1 ((LPC_CTxxBx_Type *) LPC_CT16B1_BASE)
-#define LPC_CT32B0 ((LPC_CTxxBx_Type *) LPC_CT32B0_BASE)
-#define LPC_CT32B1 ((LPC_CTxxBx_Type *) LPC_CT32B1_BASE)
-#define LPC_ADC ((LPC_ADC_Type *) LPC_ADC_BASE)
-#define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE)
-#define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE)
-#define LPC_SSP0 ((LPC_SSPx_Type *) LPC_SSP0_BASE)
-#define LPC_SSP1 ((LPC_SSPx_Type *) LPC_SSP1_BASE)
-#define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE)
-#define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE)
-#define LPC_GPIO_PIN_INT ((LPC_GPIO_PIN_INT_Type *) LPC_GPIO_PIN_INT_BASE)
-#define LPC_GPIO_GROUP_INT0 ((LPC_GPIO_GROUP_INTx_Type*) LPC_GPIO_GROUP_INT0_BASE)
-#define LPC_GPIO_GROUP_INT1 ((LPC_GPIO_GROUP_INTx_Type*) LPC_GPIO_GROUP_INT1_BASE)
-#define LPC_USB ((LPC_USB_Type *) LPC_USB_BASE)
-#define LPC_GPIO ((LPC_GPIO_Type *) LPC_GPIO_BASE)
-
-
-/** @} */ /* End of group Device_Peripheral_Registers */
-/** @} */ /* End of group (null) */
-/** @} */ /* End of group LPC11Uxx */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif // __LPC11UXX_H__
diff --git a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/power_api.h b/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/power_api.h
deleted file mode 100644
index 23296c5ff..000000000
--- a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/power_api.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/****************************************************************************
- * $Id:: power_api.h 6249 2011-01-25 19:23:47Z usb01267 $
- * Project: NXP LPC11Uxx software example
- *
- * Description:
- * Power API Header File for NXP LPC11Uxx Device Series
- *
- ****************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * NXP Semiconductors assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. NXP Semiconductors
- * reserves the right to make changes in the software without
- * notification. NXP Semiconductors also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
-****************************************************************************/
-#ifndef __LPC11UXX_POWER_API_H__
-#define __LPC11UXX_POWER_API_H__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define PWRROMD_PRESENT
-
-typedef struct _PWRD {
- void (*set_pll)(unsigned int cmd[], unsigned int resp[]);
- void (*set_power)(unsigned int cmd[], unsigned int resp[]);
-} PWRD;
-
-typedef struct _ROM {
-#ifdef USBROMD_PRESENT
- const USB * pUSBD;
-#else
- const unsigned p_usbd;
-#endif /* USBROMD_PRESENT */
- const unsigned p_clib;
- const unsigned p_cand;
-#ifdef PWRROMD_PRESENT
- const PWRD * pPWRD;
-#else
- const unsigned p_pwrd;
-#endif /* PWRROMD_PRESENT */
- const unsigned p_dev1;
- const unsigned p_dev2;
- const unsigned p_dev3;
- const unsigned p_dev4;
-} ROM;
-
-//PLL setup related definitions
-#define CPU_FREQ_EQU 0 //main PLL freq must be equal to the specified
-#define CPU_FREQ_LTE 1 //main PLL freq must be less than or equal the specified
-#define CPU_FREQ_GTE 2 //main PLL freq must be greater than or equal the specified
-#define CPU_FREQ_APPROX 3 //main PLL freq must be as close as possible the specified
-
-#define PLL_CMD_SUCCESS 0 //PLL setup successfully found
-#define PLL_INVALID_FREQ 1 //specified freq out of range (either input or output)
-#define PLL_INVALID_MODE 2 //invalid mode (see above for valid) specified
-#define PLL_FREQ_NOT_FOUND 3 //specified freq not found under specified conditions
-#define PLL_NOT_LOCKED 4 //PLL not locked => no changes to the PLL setup
-
-//power setup elated definitions
-#define PARAM_DEFAULT 0 //default power settings (voltage regulator, flash interface)
-#define PARAM_CPU_PERFORMANCE 1 //setup for maximum CPU performance (higher current, more computation)
-#define PARAM_EFFICIENCY 2 //balanced setting (power vs CPU performance)
-#define PARAM_LOW_CURRENT 3 //lowest active current, lowest CPU performance
-
-#define PARAM_CMD_SUCCESS 0 //power setting successfully found
-#define PARAM_INVALID_FREQ 1 //specified freq out of range (=0 or > 50 MHz)
-#define PARAM_INVALID_MODE 2 //specified mode not valid (see above for valid)
-
-#define MAX_CLOCK_KHZ_PARAM 50000
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __LPC11UXX_POWER_API_H__ */
-
diff --git a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/system_LPC11Uxx.h b/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/system_LPC11Uxx.h
deleted file mode 100644
index aaf73f705..000000000
--- a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/inc/system_LPC11Uxx.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/**************************************************************************//**
- * @file system_LPC11Uxx.h
- * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File
- * for the NXP LPC11Uxx Device Series
- * @version V1.10
- * @date 24. November 2010
- *
- * @note
- * Copyright (C) 2009-2010 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-
-#ifndef __SYSTEM_LPC11Uxx_H
-#define __SYSTEM_LPC11Uxx_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdint.h>
-
-extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
-
-
-/**
- * Initialize the system
- *
- * @param none
- * @return none
- *
- * @brief Setup the microcontroller system.
- * Initialize the System and update the SystemCoreClock variable.
- */
-extern void SystemInit (void);
-
-/**
- * Update SystemCoreClock variable
- *
- * @param none
- * @return none
- *
- * @brief Updates the SystemCoreClock with current core Clock
- * retrieved from cpu registers.
- */
-extern void SystemCoreClockUpdate (void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __SYSTEM_LPC11Uxx_H */
diff --git a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/liblinks.xml b/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/liblinks.xml
deleted file mode 100644
index 7ed75897a..000000000
--- a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/liblinks.xml
+++ /dev/null
@@ -1,32 +0,0 @@
-<!-- liblinks.xml
-
- LPCXpresso "Smart update wizard" script file
- When executed on a particular application project, will
- add appropriate links to the specified library project.
-
- Note that this script assumes that the application project
- contains the standard 'Debug' and 'Release' build
- configurations.
--->
-
-<project name="" update="true">
- <setting id="all.compiler.inc">
- <value>${workspace_loc:/CMSIS_CORE_LPC11Uxx/inc}</value>
- </setting>
- <setting id="all.compiler.def">
- <value>__USE_CMSIS=CMSIS_CORE_LPC11Uxx</value>
- </setting>
- <setting id="linker.libs">
- <value>CMSIS_CORE_LPC11Uxx</value>
- </setting>
- <setting id="linker.paths" buildType="Debug">
- <value>${workspace_loc:/CMSIS_CORE_LPC11Uxx/Debug}</value>
- </setting>
- <setting id="linker.paths" buildType="Release">
- <value>${workspace_loc:/CMSIS_CORE_LPC11Uxx/Release}</value>
- </setting>
- <requires msg="Library project `CMSIS_CORE_LPC11Uxx` not found">
- <value>CMSIS_CORE_LPC11Uxx</value>
- </requires>
-</project>
-
diff --git a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/src/system_LPC11Uxx.c b/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/src/system_LPC11Uxx.c
deleted file mode 100644
index 387601587..000000000
--- a/hw/mcu/nxp/lpc11uxx/CMSIS_CORE_LPC11Uxx/src/system_LPC11Uxx.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/******************************************************************************
- * @file system_LPC11Uxx.c
- * @purpose CMSIS Cortex-M3 Device Peripheral Access Layer Source File
- * for the NXP LPC13xx Device Series
- * @version V1.10
- * @date 24. November 2010
- *
- * @note
- * Copyright (C) 2009-2010 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-
-#include <stdint.h>
-#include "LPC11Uxx.h"
-
-/*
-//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
-*/
-
-/*--------------------- Clock Configuration ----------------------------------
-//
-// <e> Clock Configuration
-// <h> System Oscillator Control Register (SYSOSCCTRL)
-// <o1.0> BYPASS: System Oscillator Bypass Enable
-// <i> If enabled then PLL input (sys_osc_clk) is fed
-// <i> directly from XTALIN and XTALOUT pins.
-// <o1.9> FREQRANGE: System Oscillator Frequency Range
-// <i> Determines frequency range for Low-power oscillator.
-// <0=> 1 - 20 MHz
-// <1=> 15 - 25 MHz
-// </h>
-//
-// <h> Watchdog Oscillator Control Register (WDTOSCCTRL)
-// <o2.0..4> DIVSEL: Select Divider for Fclkana
-// <i> wdt_osc_clk = Fclkana/ (2 � (1 + DIVSEL))
-// <0-31>
-// <o2.5..8> FREQSEL: Select Watchdog Oscillator Analog Output Frequency (Fclkana)
-// <0=> Undefined
-// <1=> 0.5 MHz
-// <2=> 0.8 MHz
-// <3=> 1.1 MHz
-// <4=> 1.4 MHz
-// <5=> 1.6 MHz
-// <6=> 1.8 MHz
-// <7=> 2.0 MHz
-// <8=> 2.2 MHz
-// <9=> 2.4 MHz
-// <10=> 2.6 MHz
-// <11=> 2.7 MHz
-// <12=> 2.9 MHz
-// <13=> 3.1 MHz
-// <14=> 3.2 MHz
-// <15=> 3.4 MHz
-// </h>
-//
-// <h> System PLL Control Register (SYSPLLCTRL)
-// <i> F_clkout = M * F_clkin = F_CCO / (2 * P)
-// <i> F_clkin must be in the range of 10 MHz to 25 MHz
-// <i> F_CCO must be in the range of 156 MHz to 320 MHz
-// <o3.0..4> MSEL: Feedback Divider Selection
-// <i> M = MSEL + 1
-// <0-31>
-// <o3.5..6> PSEL: Post Divider Selection
-// <0=> P = 1
-// <1=> P = 2
-// <2=> P = 4
-// <3=> P = 8
-// </h>
-//
-// <h> System PLL Clock Source Select Register (SYSPLLCLKSEL)
-// <o4.0..1> SEL: System PLL Clock Source
-// <0=> IRC Oscillator
-// <1=> System Oscillator
-// <2=> Reserved
-// <3=> Reserved
-// </h>
-//
-// <h> Main Clock Source Select Register (MAINCLKSEL)
-// <o5.0..1> SEL: Clock Source for Main Clock
-// <0=> IRC Oscillator
-// <1=> Input Clock to System PLL
-// <2=> WDT Oscillator
-// <3=> System PLL Clock Out
-// </h>
-//
-// <h> System AHB Clock Divider Register (SYSAHBCLKDIV)
-// <o6.0..7> DIV: System AHB Clock Divider
-// <i> Divides main clock to provide system clock to core, memories, and peripherals.
-// <i> 0 = is disabled
-// <0-255>
-// </h>
-//
-// <h> USB PLL Control Register (USBPLLCTRL)
-// <i> F_clkout = M * F_clkin = F_CCO / (2 * P)
-// <i> F_clkin must be in the range of 10 MHz to 25 MHz
-// <i> F_CCO must be in the range of 156 MHz to 320 MHz
-// <o7.0..4> MSEL: Feedback Divider Selection
-// <i> M = MSEL + 1
-// <0-31>
-// <o7.5..6> PSEL: Post Divider Selection
-// <0=> P = 1
-// <1=> P = 2
-// <2=> P = 4
-// <3=> P = 8
-// </h>
-//
-// <h> USB PLL Clock Source Select Register (USBPLLCLKSEL)
-// <o8.0..1> SEL: USB PLL Clock Source
-// <i> USB PLL clock source must be switched to System Oscillator for correct USB operation
-// <0=> IRC Oscillator
-// <1=> System Oscillator
-// <2=> Reserved
-// <3=> Reserved
-// </h>
-//
-// <h> USB Clock Source Select Register (USBCLKSEL)
-// <o9.0..1> SEL: System PLL Clock Source
-// <0=> USB PLL out
-// <1=> Main clock
-// <2=> Reserved
-// <3=> Reserved
-// </h>
-//
-// <h> USB Clock Divider Register (USBCLKDIV)
-// <o10.0..7> DIV: USB Clock Divider
-// <i> Divides USB clock to 48 MHz.
-// <i> 0 = is disabled
-// <0-255>
-// </h>
-// </e>
-*/
-#define CLOCK_SETUP 1
-#define SYSOSCCTRL_Val 0x00000000 // Reset: 0x000
-#define WDTOSCCTRL_Val 0x00000000 // Reset: 0x000
-#define SYSPLLCTRL_Val 0x00000023 // Reset: 0x000
-#define SYSPLLCLKSEL_Val 0x00000001 // Reset: 0x000
-#define MAINCLKSEL_Val 0x00000003 // Reset: 0x000
-#define SYSAHBCLKDIV_Val 0x00000001 // Reset: 0x001
-#define USBPLLCTRL_Val 0x00000023 // Reset: 0x000
-#define USBPLLCLKSEL_Val 0x00000001 // Reset: 0x000
-#define USBCLKSEL_Val 0x00000000 // Reset: 0x000
-#define USBCLKDIV_Val 0x00000001 // Reset: 0x001
-
-/*
-//-------- <<< end of configuration section >>> ------------------------------
-*/
-
-/*----------------------------------------------------------------------------
- Check the register settings
- *----------------------------------------------------------------------------*/
-#define CHECK_RANGE(val, min, max) ((val < min) || (val > max))
-#define CHECK_RSVD(val, mask) (val & mask)
-
-/* Clock Configuration -------------------------------------------------------*/
-#if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003))
- #error "SYSOSCCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF))
- #error "WDTOSCCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2))
- #error "SYSPLLCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF))
- #error "SYSPLLCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003))
- #error "MAINCLKSEL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255))
- #error "SYSAHBCLKDIV: Value out of range!"
-#endif
-
-#if (CHECK_RANGE((USBPLLCLKSEL_Val), 0, 1))
- #error "USBPLLCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RSVD((USBPLLCTRL_Val), ~0x000001FF))
- #error "USBPLLCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((USBCLKSEL_Val), 0, 1))
- #error "USBCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RANGE((USBCLKDIV_Val), 0, 255))
- #error "USBCLKDIV: Value out of range!"
-#endif
-
-
-/*----------------------------------------------------------------------------
- DEFINES
- *----------------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------------
- Define clocks
- *----------------------------------------------------------------------------*/
-#define __XTAL (12000000UL) /* Oscillator frequency */
-#define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */
-#define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */
-
-
-#define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F)
-#define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2)
-
-#if (CLOCK_SETUP) /* Clock Setup */
- #if (__FREQSEL == 0)
- #define __WDT_OSC_CLK ( 0) /* undefined */
- #elif (__FREQSEL == 1)
- #define __WDT_OSC_CLK ( 500000 / __DIVSEL)
- #elif (__FREQSEL == 2)
- #define __WDT_OSC_CLK ( 800000 / __DIVSEL)
- #elif (__FREQSEL == 3)
- #define __WDT_OSC_CLK (1100000 / __DIVSEL)
- #elif (__FREQSEL == 4)
- #define __WDT_OSC_CLK (1400000 / __DIVSEL)
- #elif (__FREQSEL == 5)
- #define __WDT_OSC_CLK (1600000 / __DIVSEL)
- #elif (__FREQSEL == 6)
- #define __WDT_OSC_CLK (1800000 / __DIVSEL)
- #elif (__FREQSEL == 7)
- #define __WDT_OSC_CLK (2000000 / __DIVSEL)
- #elif (__FREQSEL == 8)
- #define __WDT_OSC_CLK (2200000 / __DIVSEL)
- #elif (__FREQSEL == 9)
- #define __WDT_OSC_CLK (2400000 / __DIVSEL)
- #elif (__FREQSEL == 10)
- #define __WDT_OSC_CLK (2600000 / __DIVSEL)
- #elif (__FREQSEL == 11)
- #define __WDT_OSC_CLK (2700000 / __DIVSEL)
- #elif (__FREQSEL == 12)
- #define __WDT_OSC_CLK (2900000 / __DIVSEL)
- #elif (__FREQSEL == 13)
- #define __WDT_OSC_CLK (3100000 / __DIVSEL)
- #elif (__FREQSEL == 14)
- #define __WDT_OSC_CLK (3200000 / __DIVSEL)
- #else
- #define __WDT_OSC_CLK (3400000 / __DIVSEL)
- #endif
-
- /* sys_pllclkin calculation */
- #if ((SYSPLLCLKSEL_Val & 0x03) == 0)
- #define __SYS_PLLCLKIN (__IRC_OSC_CLK)
- #elif ((SYSPLLCLKSEL_Val & 0x03) == 1)
- #define __SYS_PLLCLKIN (__SYS_OSC_CLK)
- #else
- #define __SYS_PLLCLKIN (0)
- #endif
-
- #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1))
-
- /* main clock calculation */
- #if ((MAINCLKSEL_Val & 0x03) == 0)
- #define __MAIN_CLOCK (__IRC_OSC_CLK)
- #elif ((MAINCLKSEL_Val & 0x03) == 1)
- #define __MAIN_CLOCK (__SYS_PLLCLKIN)
- #elif ((MAINCLKSEL_Val & 0x03) == 2)
- #if (__FREQSEL == 0)
- #error "MAINCLKSEL: WDT Oscillator selected but FREQSEL is undefined!"
- #else
- #define __MAIN_CLOCK (__WDT_OSC_CLK)
- #endif
- #elif ((MAINCLKSEL_Val & 0x03) == 3)
- #define __MAIN_CLOCK (__SYS_PLLCLKOUT)
- #else
- #define __MAIN_CLOCK (0)
- #endif
-
- #define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val)
-
-#else
- #define __SYSTEM_CLOCK (__IRC_OSC_CLK)
-#endif // CLOCK_SETUP
-
-
-/*----------------------------------------------------------------------------
- Clock Variable definitions
- *----------------------------------------------------------------------------*/
-uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/
-
-
-/*----------------------------------------------------------------------------
- Clock functions
- *----------------------------------------------------------------------------*/
-void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */
-{
- uint32_t wdt_osc = 0;
-
- /* Determine clock frequency according to clock register values */
- switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) {
- case 0: wdt_osc = 0; break;
- case 1: wdt_osc = 500000; break;
- case 2: wdt_osc = 800000; break;
- case 3: wdt_osc = 1100000; break;
- case 4: wdt_osc = 1400000; break;
- case 5: wdt_osc = 1600000; break;
- case 6: wdt_osc = 1800000; break;
- case 7: wdt_osc = 2000000; break;
- case 8: wdt_osc = 2200000; break;
- case 9: wdt_osc = 2400000; break;
- case 10: wdt_osc = 2600000; break;
- case 11: wdt_osc = 2700000; break;
- case 12: wdt_osc = 2900000; break;
- case 13: wdt_osc = 3100000; break;
- case 14: wdt_osc = 3200000; break;
- case 15: wdt_osc = 3400000; break;
- }
- wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2;
-
- switch (LPC_SYSCON->MAINCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- SystemCoreClock = __IRC_OSC_CLK;
- break;
- case 1: /* Input Clock to System PLL */
- switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- SystemCoreClock = __IRC_OSC_CLK;
- break;
- case 1: /* System oscillator */
- SystemCoreClock = __SYS_OSC_CLK;
- break;
- case 2: /* Reserved */
- case 3: /* Reserved */
- SystemCoreClock = 0;
- break;
- }
- break;
- case 2: /* WDT Oscillator */
- SystemCoreClock = wdt_osc;
- break;
- case 3: /* System PLL Clock Out */
- switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
- SystemCoreClock = __IRC_OSC_CLK;
- } else {
- SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
- }
- break;
- case 1: /* System oscillator */
- if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
- SystemCoreClock = __SYS_OSC_CLK;
- } else {
- SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
- }
- break;
- case 2: /* Reserved */
- case 3: /* Reserved */
- SystemCoreClock = 0;
- break;
- }
- break;
- }
-
- SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV;
-
-}
-
-/**
- * Initialize the system
- *
- * @param none
- * @return none
- *
- * @brief Setup the microcontroller system.
- * Initialize the System.
- */
-void SystemInit (void) {
- volatile uint32_t i;
-
-#if (CLOCK_SETUP) /* Clock Setup */
-
-#if ((SYSPLLCLKSEL_Val & 0x03) == 1)
- LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */
- LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val;
- for (i = 0; i < 200; i++) __NOP();
-#endif
-
- LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */
- LPC_SYSCON->SYSPLLCLKUEN = 0x01; /* Update Clock Source */
- LPC_SYSCON->SYSPLLCLKUEN = 0x00; /* Toggle Update Register */
- LPC_SYSCON->SYSPLLCLKUEN = 0x01;
- while (!(LPC_SYSCON->SYSPLLCLKUEN & 0x01)); /* Wait Until Updated */
-#if ((MAINCLKSEL_Val & 0x03) == 3) /* Main Clock is PLL Out */
- LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val;
- LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */
- while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */
-#endif
-
-#if (((MAINCLKSEL_Val & 0x03) == 2) )
- LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val;
- LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */
- for (i = 0; i < 200; i++) __NOP();
-#endif
-
- LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */
- LPC_SYSCON->MAINCLKUEN = 0x01; /* Update MCLK Clock Source */
- LPC_SYSCON->MAINCLKUEN = 0x00; /* Toggle Update Register */
- LPC_SYSCON->MAINCLKUEN = 0x01;
- while (!(LPC_SYSCON->MAINCLKUEN & 0x01)); /* Wait Until Updated */
-
- LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val;
-
-#if ((USBCLKDIV_Val & 0x1FF) != 0) /* USB clock is used */
- LPC_SYSCON->PDRUNCFG &= ~(1 << 10); /* Power-up USB PHY */
-
-#if ((USBCLKSEL_Val & 0x003) == 0) /* USB clock is USB PLL out */
- LPC_SYSCON->PDRUNCFG &= ~(1 << 8); /* Power-up USB PLL */
- LPC_SYSCON->USBPLLCLKSEL = USBPLLCLKSEL_Val; /* Select PLL Input */
- LPC_SYSCON->USBPLLCLKUEN = 0x01; /* Update Clock Source */
- LPC_SYSCON->USBPLLCLKUEN = 0x00; /* Toggle Update Register */
- LPC_SYSCON->USBPLLCLKUEN = 0x01;
- while (!(LPC_SYSCON->USBPLLCLKUEN & 0x01)); /* Wait Until Updated */
- LPC_SYSCON->USBPLLCTRL = USBPLLCTRL_Val;
- while (!(LPC_SYSCON->USBPLLSTAT & 0x01)); /* Wait Until PLL Locked */
- LPC_SYSCON->USBCLKSEL = 0x00; /* Select USB PLL */
-#endif
-
- LPC_SYSCON->USBCLKSEL = USBCLKSEL_Val; /* Select USB Clock */
- LPC_SYSCON->USBCLKDIV = USBCLKDIV_Val; /* Set USB clock divider */
-
-#else /* USB clock is not used */
- LPC_SYSCON->PDRUNCFG |= (1 << 10); /* Power-down USB PHY */
- LPC_SYSCON->PDRUNCFG |= (1 << 8); /* Power-down USB PLL */
-#endif
-
-#endif
-
- /* System clock to the IOCON needs to be enabled or
- most of the I/O related peripherals won't work. */
- LPC_SYSCON->SYSAHBCLKCTRL |= (1<<16);
-
-}
diff --git a/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.c b/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.c
deleted file mode 100644
index e867fcd4b..000000000
--- a/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.c
+++ /dev/null
@@ -1,819 +0,0 @@
-/****************************************************************************
- * $Id:: gpio.c 6172 2011-01-13 18:22:51Z usb00423 $
- * Project: NXP LPC11Uxx GPIO example
- *
- * Description:
- * This file contains GPIO code example which include GPIO
- * initialization, GPIO interrupt handler, and related APIs for
- * GPIO access.
- *
- ****************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * NXP Semiconductors assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. NXP Semiconductors
- * reserves the right to make changes in the software without
- * notification. NXP Semiconductors also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
-****************************************************************************/
-#include "LPC11Uxx.h" /* LPC11Uxx Peripheral Registers */
-#include "lpc11uxx_gpio.h"
-
-volatile uint32_t flex_int0_counter = 0;
-volatile uint32_t flex_int1_counter = 0;
-volatile uint32_t flex_int2_counter = 0;
-volatile uint32_t flex_int3_counter = 0;
-volatile uint32_t flex_int4_counter = 0;
-volatile uint32_t flex_int5_counter = 0;
-volatile uint32_t flex_int6_counter = 0;
-volatile uint32_t flex_int7_counter = 0;
-volatile uint32_t gint0_counter = 0;
-volatile uint32_t gint1_counter = 0;
-volatile uint32_t flex_int0_level_counter = 0;
-volatile uint32_t flex_int0_rising_edge_counter = 0;
-volatile uint32_t flex_int0_falling_edge_counter = 0;
-volatile uint32_t flex_int1_level_counter = 0;
-volatile uint32_t flex_int1_rising_edge_counter = 0;
-volatile uint32_t flex_int1_falling_edge_counter = 0;
-volatile uint32_t flex_int2_level_counter = 0;
-volatile uint32_t flex_int2_rising_edge_counter = 0;
-volatile uint32_t flex_int2_falling_edge_counter = 0;
-volatile uint32_t flex_int3_level_counter = 0;
-volatile uint32_t flex_int3_rising_edge_counter = 0;
-volatile uint32_t flex_int3_falling_edge_counter = 0;
-volatile uint32_t flex_int4_level_counter = 0;
-volatile uint32_t flex_int4_rising_edge_counter = 0;
-volatile uint32_t flex_int4_falling_edge_counter = 0;
-volatile uint32_t flex_int5_level_counter = 0;
-volatile uint32_t flex_int5_rising_edge_counter = 0;
-volatile uint32_t flex_int5_falling_edge_counter = 0;
-volatile uint32_t flex_int6_level_counter = 0;
-volatile uint32_t flex_int6_rising_edge_counter = 0;
-volatile uint32_t flex_int6_falling_edge_counter = 0;
-volatile uint32_t flex_int7_level_counter = 0;
-volatile uint32_t flex_int7_rising_edge_counter = 0;
-volatile uint32_t flex_int7_falling_edge_counter = 0;
-volatile uint32_t gint0_level_counter = 0;
-volatile uint32_t gint0_edge_counter = 0;
-volatile uint32_t gint1_level_counter = 0;
-volatile uint32_t gint1_edge_counter = 0;
-
-/*****************************************************************************
-** Function name: FLEX_INT0_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void FLEX_INT0_IRQHandler(void)
-{
- flex_int0_counter++;
- if ( LPC_GPIO_PIN_INT->IST & (0x1<<0) )
- {
- if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<0) )
- {
- flex_int0_level_counter++;
- }
- else
- {
- if ( LPC_GPIO_PIN_INT->RISE & (0x1<<0) )
- {
- flex_int0_rising_edge_counter++;
- LPC_GPIO_PIN_INT->RISE = 0x1<<0;
- }
- else if ( LPC_GPIO_PIN_INT->FALL & (0x1<<0) )
- {
- flex_int0_falling_edge_counter++;
- LPC_GPIO_PIN_INT->FALL = 0x1<<0;
- }
- LPC_GPIO_PIN_INT->IST = 0x1<<0;
- }
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: FLEX_INT1_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void FLEX_INT1_IRQHandler(void)
-{
- flex_int1_counter++;
- if ( LPC_GPIO_PIN_INT->IST & (0x1<<1) )
- {
- if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<1) )
- {
- flex_int1_level_counter++;
- }
- else
- {
- if ( LPC_GPIO_PIN_INT->RISE & (0x1<<1) )
- {
- flex_int1_rising_edge_counter++;
- LPC_GPIO_PIN_INT->RISE = 0x1<<1;
- }
- else if ( LPC_GPIO_PIN_INT->FALL & (0x1<<1) )
- {
- flex_int1_falling_edge_counter++;
- LPC_GPIO_PIN_INT->FALL = 0x1<<1;
- }
- LPC_GPIO_PIN_INT->IST = 0x1<<1;
- }
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: FLEX_INT2_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void FLEX_INT2_IRQHandler(void)
-{
- flex_int2_counter++;
- if ( LPC_GPIO_PIN_INT->IST & (0x1<<2) )
- {
- if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<2) )
- {
- flex_int2_level_counter++;
- }
- else
- {
- if ( LPC_GPIO_PIN_INT->RISE & (0x1<<2) )
- {
- flex_int2_rising_edge_counter++;
- LPC_GPIO_PIN_INT->RISE = 0x1<<2;
- }
- else if ( LPC_GPIO_PIN_INT->FALL & (0x1<<2) )
- {
- flex_int2_falling_edge_counter++;
- LPC_GPIO_PIN_INT->FALL = 0x1<<2;
- }
- LPC_GPIO_PIN_INT->IST = 0x1<<2;
- }
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: FLEX_INT3_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void FLEX_INT3_IRQHandler(void)
-{
- flex_int3_counter++;
- if ( LPC_GPIO_PIN_INT->IST & (0x1<<3) )
- {
- if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<3) )
- {
- flex_int3_level_counter++;
- }
- else
- {
- if ( LPC_GPIO_PIN_INT->RISE & (0x1<<3) )
- {
- flex_int3_rising_edge_counter++;
- LPC_GPIO_PIN_INT->RISE = 0x1<<3;
- }
- else if ( LPC_GPIO_PIN_INT->FALL & (0x1<<3) )
- {
- flex_int3_falling_edge_counter++;
- LPC_GPIO_PIN_INT->FALL = 0x1<<3;
- }
- LPC_GPIO_PIN_INT->IST = 0x1<<3;
- }
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: FLEX_INT4_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void FLEX_INT4_IRQHandler(void)
-{
- flex_int4_counter++;
- if ( LPC_GPIO_PIN_INT->IST & (0x1<<4) )
- {
- if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<4) )
- {
- flex_int4_level_counter++;
- }
- else
- {
- if ( LPC_GPIO_PIN_INT->RISE & (0x1<<4) )
- {
- flex_int4_rising_edge_counter++;
- LPC_GPIO_PIN_INT->RISE = 0x1<<4;
- }
- else if ( LPC_GPIO_PIN_INT->FALL & (0x1<<4) )
- {
- flex_int4_falling_edge_counter++;
- LPC_GPIO_PIN_INT->FALL = 0x1<<4;
- }
- LPC_GPIO_PIN_INT->IST = 0x1<<4;
- }
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: FLEX_INT5_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void FLEX_INT5_IRQHandler(void)
-{
- flex_int5_counter++;
- if ( LPC_GPIO_PIN_INT->IST & (0x1<<5) )
- {
- if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<5) )
- {
- flex_int5_level_counter++;
- }
- else
- {
- if ( LPC_GPIO_PIN_INT->RISE & (0x1<<5) )
- {
- flex_int5_rising_edge_counter++;
- LPC_GPIO_PIN_INT->RISE = 0x1<<5;
- }
- else if ( LPC_GPIO_PIN_INT->FALL & (0x1<<5) )
- {
- flex_int5_falling_edge_counter++;
- LPC_GPIO_PIN_INT->FALL = 0x1<<5;
- }
- LPC_GPIO_PIN_INT->IST = 0x1<<5;
- }
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: FLEX_INT6_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void FLEX_INT6_IRQHandler(void)
-{
- flex_int6_counter++;
- if ( LPC_GPIO_PIN_INT->IST & (0x1<<6) )
- {
- if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<6) )
- {
- flex_int6_level_counter++;
- }
- else
- {
- if ( LPC_GPIO_PIN_INT->RISE & (0x1<<6) )
- {
- flex_int6_rising_edge_counter++;
- LPC_GPIO_PIN_INT->RISE = 0x1<<6;
- }
- else if ( LPC_GPIO_PIN_INT->FALL & (0x1<<6) )
- {
- flex_int6_falling_edge_counter++;
- LPC_GPIO_PIN_INT->FALL = 0x1<<6;
- }
- LPC_GPIO_PIN_INT->IST = 0x1<<6;
- }
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: FLEX_INT7_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void FLEX_INT7_IRQHandler(void)
-{
- flex_int7_counter++;
- if ( LPC_GPIO_PIN_INT->IST & (0x1<<7) )
- {
- if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<7) )
- {
- flex_int7_level_counter++;
- }
- else
- {
- if ( LPC_GPIO_PIN_INT->RISE & (0x1<<7) )
- {
- flex_int7_rising_edge_counter++;
- LPC_GPIO_PIN_INT->RISE = 0x1<<7;
- }
- else if ( LPC_GPIO_PIN_INT->FALL & (0x1<<7) )
- {
- flex_int7_falling_edge_counter++;
- LPC_GPIO_PIN_INT->FALL = 0x1<<7;
- }
- LPC_GPIO_PIN_INT->IST = 0x1<<7;
- }
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: GINT0_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void GINT0_IRQHandler(void)
-{
- gint0_counter++;
- if ( LPC_GPIO_GROUP_INT0->CTRL & 0x1 )
- {
- if ( LPC_GPIO_GROUP_INT0->CTRL & (0x1<<4) )
- {
- gint0_level_counter++;
- }
- else
- {
- gint0_edge_counter++;
- }
- LPC_GPIO_GROUP_INT0->CTRL |= 0x1;
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: GINT1_IRQHandler
-**
-** Descriptions: Use one GPIO pin as interrupt source
-**
-** parameters: None
-**
-** Returned value: None
-**
-*****************************************************************************/
-void GINT1_IRQHandler(void)
-{
- gint1_counter++;
- if ( LPC_GPIO_GROUP_INT1->CTRL & 0x1 )
- {
- if ( LPC_GPIO_GROUP_INT1->CTRL & (0x1<<4) )
- {
- gint1_level_counter++;
- }
- else
- {
- gint1_edge_counter++;
- }
- LPC_GPIO_GROUP_INT1->CTRL |= 0x1;
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: GPIOInit
-**
-** Descriptions: Initialize GPIO, install the
-** GPIO interrupt handler
-**
-** parameters: None
-**
-** Returned value: true or false, return false if the VIC table
-** is full and GPIO interrupt handler can be
-** installed.
-**
-*****************************************************************************/
-void GPIOInit( void )
-{
- /* Enable AHB clock to the GPIO domain. */
- LPC_SYSCON->SYSAHBCLKCTRL |= (1<<6);
-
- /* Enable AHB clock to the FlexInt, GroupedInt domain. */
- LPC_SYSCON->SYSAHBCLKCTRL |= ((1<<19) | (1<<23) | (1<<24));
-
- return;
-}
-
-/*****************************************************************************
-** Function name: GPIOSetFlexInterrupt
-**
-** Descriptions: Set interrupt sense, event, etc.
-** sense: edge or level, 0 is edge, 1 is level
-** event/polarity: 0 is active low/falling, 1 is high/rising.
-**
-** parameters: channel #, port #, bit position, sense, event(polarity)
-**
-** Returned value: None
-**
-*****************************************************************************/
-void GPIOSetFlexInterrupt( uint32_t channelNum, uint32_t portNum, uint32_t bitPosi,
- uint32_t sense, uint32_t event )
-{
- switch ( channelNum )
- {
- case CHANNEL0:
- if ( portNum )
- {
- LPC_SYSCON->PINTSEL[0] = bitPosi + 24;
- }
- else
- {
- LPC_SYSCON->PINTSEL[0] = bitPosi;
- }
- NVIC_EnableIRQ(FLEX_INT0_IRQn);
- break;
- case CHANNEL1:
- if ( portNum )
- {
- LPC_SYSCON->PINTSEL[1] = bitPosi + 24;
- }
- else
- {
- LPC_SYSCON->PINTSEL[1] = bitPosi;
- }
- NVIC_EnableIRQ(FLEX_INT1_IRQn);
- break;
- case CHANNEL2:
- if ( portNum )
- {
- LPC_SYSCON->PINTSEL[2] = bitPosi + 24;
- }
- else
- {
- LPC_SYSCON->PINTSEL[2] = bitPosi;
- }
- NVIC_EnableIRQ(FLEX_INT2_IRQn);
- break;
- case CHANNEL3:
- if ( portNum )
- {
- LPC_SYSCON->PINTSEL[3] = bitPosi + 24;
- }
- else
- {
- LPC_SYSCON->PINTSEL[3] = bitPosi;
- }
- NVIC_EnableIRQ(FLEX_INT3_IRQn);
- break;
- case CHANNEL4:
- if ( portNum )
- {
- LPC_SYSCON->PINTSEL[4] = bitPosi + 24;
- }
- else
- {
- LPC_SYSCON->PINTSEL[4] = bitPosi;
- }
- NVIC_EnableIRQ(FLEX_INT4_IRQn);
- break;
- case CHANNEL5:
- if ( portNum )
- {
- LPC_SYSCON->PINTSEL[5] = bitPosi + 24;
- }
- else
- {
- LPC_SYSCON->PINTSEL[5] = bitPosi;
- }
- NVIC_EnableIRQ(FLEX_INT5_IRQn);
- break;
- case CHANNEL6:
- if ( portNum )
- {
- LPC_SYSCON->PINTSEL[6] = bitPosi + 24;
- }
- else
- {
- LPC_SYSCON->PINTSEL[6] = bitPosi;
- }
- NVIC_EnableIRQ(FLEX_INT6_IRQn);
- break;
- case CHANNEL7:
- if ( portNum )
- {
- LPC_SYSCON->PINTSEL[7] = bitPosi + 24;
- }
- else
- {
- LPC_SYSCON->PINTSEL[7] = bitPosi;
- }
- NVIC_EnableIRQ(FLEX_INT7_IRQn);
- break;
- default:
- break;
- }
- if ( sense == 0 )
- {
- LPC_GPIO_PIN_INT->ISEL &= ~(0x1<<channelNum); /* Edge trigger */
- if ( event == 0 )
- {
- LPC_GPIO_PIN_INT->IENF |= (0x1<<channelNum); /* faling edge */
- }
- else
- {
- LPC_GPIO_PIN_INT->IENR |= (0x1<<channelNum); /* Rising edge */
- }
- }
- else
- {
- LPC_GPIO_PIN_INT->ISEL |= (0x1<<channelNum); /* Level trigger. */
- LPC_GPIO_PIN_INT->IENR |= (0x1<<channelNum); /* Level enable */
- if ( event == 0 )
- {
- LPC_GPIO_PIN_INT->IENF &= ~(0x1<<channelNum); /* active-low */
- }
- else
- {
- LPC_GPIO_PIN_INT->IENF |= (0x1<<channelNum); /* active-high */
- }
- }
-
- return;
-}
-
-/*****************************************************************************
-** Function name: GPIOFlexIntEnable
-**
-** Descriptions: Enable Interrupt
-**
-** parameters: channel num, event(0 is falling edge, 1 is rising edge)
-** Returned value: None
-**
-*****************************************************************************/
-void GPIOFlexIntEnable( uint32_t channelNum, uint32_t event )
-{
- if ( !( LPC_GPIO_PIN_INT->ISEL & (0x1<<channelNum) ) )
- {
- if ( event == 0 )
- {
- LPC_GPIO_PIN_INT->SIENF |= (0x1<<channelNum); /* faling edge */
- }
- else
- {
- LPC_GPIO_PIN_INT->SIENR |= (0x1<<channelNum); /* Rising edge */
- }
- }
- else
- {
- LPC_GPIO_PIN_INT->SIENR |= (0x1<<channelNum); /* Level */
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: GPIOFlexIntDisable
-**
-** Descriptions: Disable Interrupt
-**
-** parameters: channel num, event(0 is falling edge, 1 is rising edge)
-**
-** Returned value: None
-**
-*****************************************************************************/
-void GPIOFlexIntDisable( uint32_t channelNum, uint32_t event )
-{
- if ( !( LPC_GPIO_PIN_INT->ISEL & (0x1<<channelNum) ) )
- {
- if ( event == 0 )
- {
- LPC_GPIO_PIN_INT->CIENF |= (0x1<<channelNum); /* faling edge */
- }
- else
- {
- LPC_GPIO_PIN_INT->CIENR |= (0x1<<channelNum); /* Rising edge */
- }
- }
- else
- {
- LPC_GPIO_PIN_INT->CIENR |= (0x1<<channelNum); /* Level */
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: GPIOFlexIntStatus
-**
-** Descriptions: Get Interrupt status
-**
-** parameters: channel num
-**
-** Returned value: None
-**
-*****************************************************************************/
-uint32_t GPIOFlexIntStatus( uint32_t channelNum )
-{
- if ( LPC_GPIO_PIN_INT->IST & (0x1<<channelNum) )
- {
- return( 1 );
- }
- else
- {
- return( 0 );
- }
-}
-
-/*****************************************************************************
-** Function name: GPIOFlexIntClear
-**
-** Descriptions: Clear Interrupt
-**
-** parameters: channel num
-**
-** Returned value: None
-**
-*****************************************************************************/
-void GPIOFlexIntClear( uint32_t channelNum )
-{
- if ( !( LPC_GPIO_PIN_INT->ISEL & (0x1<<channelNum) ) )
- {
- LPC_GPIO_PIN_INT->IST = (1<<channelNum);
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: GPIOSetGroupedInterrupt
-**
-** Descriptions: Set interrupt logic, sense, eventPattern, etc.
-** logic: AND or OR, 0 is OR, 1 is AND
-** sensePattern: edge or level, 0 is edge, 1 is level
-** event/polarity: 0 is active low/falling, 1 is high/rising.
-**
-** parameters: group #, bit pattern, logic, sense, event(polarity) pattern
-**
-** Returned value: None
-**
-*****************************************************************************/
-void GPIOSetGroupedInterrupt( uint32_t groupNum, uint32_t *bitPattern, uint32_t logic,
- uint32_t sense, uint32_t *eventPattern )
-{
- switch ( groupNum )
- {
- case GROUP0:
- if ( sense == 0 )
- {
- LPC_GPIO_GROUP_INT0->CTRL &= ~(0x1<<2); /* Edge trigger */
- }
- else
- {
- LPC_GPIO_GROUP_INT0->CTRL |= (0x1<<2); /* Level trigger. */
- }
- LPC_GPIO_GROUP_INT0->CTRL |= (logic<<1);
- LPC_GPIO_GROUP_INT0->PORT_POL[0] = *((uint32_t *)(eventPattern + 0));
- LPC_GPIO_GROUP_INT0->PORT_POL[1] = *((uint32_t *)(eventPattern + 1));
- LPC_GPIO_GROUP_INT0->PORT_ENA[0] = *((uint32_t *)(bitPattern + 0));
- LPC_GPIO_GROUP_INT0->PORT_ENA[1] = *((uint32_t *)(bitPattern + 1));
- /* as soon as enabled, an edge may be generated */
- /* clear interrupt flag and NVIC pending interrupt to */
- /* workaround the potential edge generated as enabled */
- LPC_GPIO_GROUP_INT0->CTRL |= (1<<0);
- NVIC_ClearPendingIRQ(GINT0_IRQn);
- NVIC_EnableIRQ(GINT0_IRQn);
- break;
- case GROUP1:
- if ( sense == 0 )
- {
- LPC_GPIO_GROUP_INT1->CTRL &= ~(0x1<<2); /* Edge trigger */
- }
- else
- {
- LPC_GPIO_GROUP_INT1->CTRL |= (0x1<<2); /* Level trigger. */
- }
- LPC_GPIO_GROUP_INT1->CTRL |= (logic<<1);
- LPC_GPIO_GROUP_INT1->PORT_POL[0] = *((uint32_t *)(eventPattern + 0));
- LPC_GPIO_GROUP_INT1->PORT_POL[1] = *((uint32_t *)(eventPattern + 1));
- LPC_GPIO_GROUP_INT1->PORT_ENA[0] = *((uint32_t *)(bitPattern + 0));
- LPC_GPIO_GROUP_INT1->PORT_ENA[1] = *((uint32_t *)(bitPattern + 1));
- /* as soon as enabled, an edge may be generated */
- /* clear interrupt flag and NVIC pending interrupt to */
- /* workaround the potential edge generated as enabled */
- LPC_GPIO_GROUP_INT1->CTRL |= (1<<0);
- NVIC_ClearPendingIRQ(GINT1_IRQn);
- NVIC_EnableIRQ(GINT1_IRQn);
- break;
- default:
- break;
- }
-
- return;
-}
-
-/*****************************************************************************
-** Function name: GPIOGetPinValue
-**
-** Descriptions: Read Current state of port pin, PIN register value
-**
-** parameters: port num, bit position
-** Returned value: None
-**
-*****************************************************************************/
-uint32_t GPIOGetPinValue( uint32_t portNum, uint32_t bitPosi )
-{
- uint32_t regVal = 0;
-
- if( bitPosi < 0x20 )
- {
- if ( LPC_GPIO->PIN[portNum] & (0x1<<bitPosi) )
- {
- regVal = 1;
- }
- }
- else if( bitPosi == 0xFF )
- {
- regVal = LPC_GPIO->PIN[portNum];
- }
- return ( regVal );
-}
-
-/*****************************************************************************
-** Function name: GPIOSetBitValue
-**
-** Descriptions: Set/clear a bit in a specific position
-**
-** parameters: port num, bit position, bit value
-**
-** Returned value: None
-**
-*****************************************************************************/
-void GPIOSetBitValue( uint32_t portNum, uint32_t bitPosi, uint32_t bitVal )
-{
- if ( bitVal )
- {
- LPC_GPIO->SET[portNum] = 1<<bitPosi;
- }
- else
- {
- LPC_GPIO->CLR[portNum] = 1<<bitPosi;
- }
- return;
-}
-
-/*****************************************************************************
-** Function name: GPIOSetDir
-**
-** Descriptions: Set the direction in GPIO port
-**
-** parameters: portNum, bit position, direction (1 out, 0 input)
-**
-** Returned value: None
-**
-*****************************************************************************/
-void GPIOSetDir( uint32_t portNum, uint32_t bitPosi, uint32_t dir )
-{
- if( dir )
- {
- LPC_GPIO->DIR[portNum] |= (1<<bitPosi);
- }
- else
- {
- LPC_GPIO->DIR[portNum] &= ~(1<<bitPosi);
- }
- return;
-}
-
-/******************************************************************************
-** End Of File
-******************************************************************************/
diff --git a/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.h b/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.h
deleted file mode 100644
index 1bc87427a..000000000
--- a/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/****************************************************************************
- * $Id:: gpio.h 6172 2011-01-13 18:22:51Z usb00423 $
- * Project: NXP LPC11Uxx software example
- *
- * Description:
- * This file contains definition and prototype for GPIO.
- *
- ****************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * NXP Semiconductors assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. NXP Semiconductors
- * reserves the right to make changes in the software without
- * notification. NXP Semiconductors also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
-****************************************************************************/
-#ifndef __GPIO_H
-#define __GPIO_H
-
-#define CHANNEL0 0
-#define CHANNEL1 1
-#define CHANNEL2 2
-#define CHANNEL3 3
-#define CHANNEL4 4
-#define CHANNEL5 5
-#define CHANNEL6 6
-#define CHANNEL7 7
-
-#define PORT0 0
-#define PORT1 1
-
-#define GROUP0 0
-#define GROUP1 1
-
-void FLEX_INT0_IRQHandler(void);
-void FLEX_INT1_IRQHandler(void);
-void FLEX_INT2_IRQHandler(void);
-void FLEX_INT3_IRQHandler(void);
-void FLEX_INT4_IRQHandler(void);
-void FLEX_INT5_IRQHandler(void);
-void FLEX_INT6_IRQHandler(void);
-void FLEX_INT7_IRQHandler(void);
-void GINT0_IRQHandler(void);
-void GINT1_IRQHandler(void);
-void GPIOInit( void );
-void GPIOSetFlexInterrupt( uint32_t channelNum, uint32_t portNum, uint32_t bitPosi,
- uint32_t sense, uint32_t event );
-void GPIOFlexIntEnable( uint32_t channelNum, uint32_t event );
-void GPIOFlexIntDisable( uint32_t channelNum, uint32_t event );
-uint32_t GPIOFlexIntStatus( uint32_t channelNum );
-void GPIOFlexIntClear( uint32_t channelNum );
-void GPIOSetGroupedInterrupt( uint32_t groupNum, uint32_t *bitPattern, uint32_t logic,
- uint32_t sense, uint32_t *eventPattern );
-uint32_t GPIOGetPinValue( uint32_t portNum, uint32_t bitPosi );
-void GPIOSetBitValue( uint32_t portNum, uint32_t bitPosi, uint32_t bitVal );
-void GPIOSetDir( uint32_t portNum, uint32_t bitPosi, uint32_t dir );
-
-#endif /* end __GPIO_H */
-/*****************************************************************************
-** End Of File
-******************************************************************************/
diff --git a/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.c b/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.c
deleted file mode 100644
index d3c2cc8d1..000000000
--- a/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*****************************************************************************
- * uart.c: UART API file for NXP LPC11xx Family Microprocessors
- *
- * Copyright(C) 2008, NXP Semiconductor
- * All rights reserved.
- *
- * History
- * 2009.12.07 ver 1.00 Preliminary version, first Release
- *
-******************************************************************************/
-
-#include <stdint.h>
-#include "LPC11Uxx.h"
-#include "lpc11uxx_uart.h"
-
-volatile uint32_t UARTStatus;
-volatile uint8_t UARTTxEmpty = 1;
-volatile uint8_t UARTBuffer[BUFSIZE];
-volatile uint32_t UARTCount = 0;
-
-/*****************************************************************************
-** Function name: UART_IRQHandler
-**
-** Descriptions: UART interrupt handler
-**
-** parameters: None
-** Returned value: None
-**
-*****************************************************************************/
-void UART_IRQHandler(void)
-{
- uint8_t IIRValue, LSRValue;
- uint8_t Dummy = Dummy;
-
- IIRValue = LPC_USART->IIR;
-
- IIRValue >>= 1; /* skip pending bit in IIR */
- IIRValue &= 0x07; /* check bit 1~3, interrupt identification */
- if (IIRValue == IIR_RLS) /* Receive Line Status */
- {
- LSRValue = LPC_USART->LSR;
- /* Receive Line Status */
- if (LSRValue & (LSR_OE | LSR_PE | LSR_FE | LSR_RXFE | LSR_BI))
- {
- /* There are errors or break interrupt */
- /* Read LSR will clear the interrupt */
- UARTStatus = LSRValue;
- Dummy = LPC_USART->RBR; /* Dummy read on RX to clear
- interrupt, then bail out */
- return;
- }
- if (LSRValue & LSR_RDR) /* Receive Data Ready */
- {
- /* If no error on RLS, normal ready, save into the data buffer. */
- /* Note: read RBR will clear the interrupt */
- UARTBuffer[UARTCount++] = LPC_USART->RBR;
- if (UARTCount == BUFSIZE)
- {
- UARTCount = 0; /* buffer overflow */
- }
- }
- }
- else if (IIRValue == IIR_RDA) /* Receive Data Available */
- {
- /* Receive Data Available */
- UARTBuffer[UARTCount++] = LPC_USART->RBR;
- if (UARTCount == BUFSIZE)
- {
- UARTCount = 0; /* buffer overflow */
- }
- }
- else if (IIRValue == IIR_CTI) /* Character timeout indicator */
- {
- /* Character Time-out indicator */
- UARTStatus |= 0x100; /* Bit 9 as the CTI error */
- }
- else if (IIRValue == IIR_THRE) /* THRE, transmit holding register empty */
- {
- /* THRE interrupt */
- LSRValue = LPC_USART->LSR; /* Check status in the LSR to see if
- valid data in U0THR or not */
- if (LSRValue & LSR_THRE)
- {
- UARTTxEmpty = 1;
- }
- else
- {
- UARTTxEmpty = 0;
- }
- }
- return;
-}
-
-#if MODEM_TEST
-/*****************************************************************************
-** Function name: ModemInit
-**
-** Descriptions: Initialize UART0 port as modem, setup pin select.
-**
-** parameters: None
-** Returned value: None
-**
-*****************************************************************************/
-void ModemInit( void )
-{
- LPC_IOCON->PIO2_0 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO2_0 |= 0x01; /* UART DTR */
- LPC_IOCON->PIO0_7 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO0_7 |= 0x01; /* UART CTS */
- LPC_IOCON->PIO1_5 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO1_5 |= 0x01; /* UART RTS */
-#if 1
- LPC_IOCON->DSR_LOC = 0;
- LPC_IOCON->PIO2_1 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO2_1 |= 0x01; /* UART DSR */
-
- LPC_IOCON->DCD_LOC = 0;
- LPC_IOCON->PIO2_2 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO2_2 |= 0x01; /* UART DCD */
-
- LPC_IOCON->RI_LOC = 0;
- LPC_IOCON->PIO2_3 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO2_3 |= 0x01; /* UART RI */
-
-#else
- LPC_IOCON->DSR_LOC = 1;
- LPC_IOCON->PIO3_1 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO3_1 |= 0x01; /* UART DSR */
-
- LPC_IOCON->DCD_LOC = 1;
- LPC_IOCON->PIO3_2 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO3_2 |= 0x01; /* UART DCD */
-
- LPC_IOCON->RI_LOC = 1;
- LPC_IOCON->PIO3_3 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO3_3 |= 0x01; /* UART RI */
-#endif
- LPC_USART->MCR = 0xC0; /* Enable Auto RTS and Auto CTS. */
- return;
-}
-#endif
-
-/*****************************************************************************
-** Function name: UARTInit
-**
-** Descriptions: Initialize UART0 port, setup pin select,
-** clock, parity, stop bits, FIFO, etc.
-**
-** parameters: UART baudrate
-** Returned value: None
-**
-*****************************************************************************/
-void UARTInit(uint32_t baudrate)
-{
- uint32_t Fdiv;
- uint32_t regVal;
-
- UARTTxEmpty = 1;
- UARTCount = 0;
-
- NVIC_DisableIRQ(UART_IRQn);
-
- LPC_IOCON->PIO0_18 &= ~0x07; /* UART I/O config */
- LPC_IOCON->PIO0_18 |= 0x01; /* UART RXD */
- LPC_IOCON->PIO0_19 &= ~0x07;
- LPC_IOCON->PIO0_19 |= 0x01; /* UART TXD */
- /* Enable UART clock */
- LPC_SYSCON->SYSAHBCLKCTRL |= (1<<12);
- LPC_SYSCON->UARTCLKDIV = 0x1; /* divided by 1 */
-
- LPC_USART->LCR = 0x83; /* 8 bits, no Parity, 1 Stop bit */
- regVal = LPC_SYSCON->UARTCLKDIV;
-
- Fdiv = (((SystemCoreClock*LPC_SYSCON->SYSAHBCLKDIV)/regVal)/16)/baudrate ; /*baud rate */
-
- LPC_USART->DLM = Fdiv / 256;
- LPC_USART->DLL = Fdiv % 256;
- LPC_USART->LCR = 0x03; /* DLAB = 0 */
- LPC_USART->FCR = 0x07; /* Enable and reset TX and RX FIFO. */
-
- /* Read to clear the line status. */
- regVal = LPC_USART->LSR;
-
- /* Ensure a clean start, no data in either TX or RX FIFO. */
-// CodeRed - added parentheses around comparison in operand of &
- while (( LPC_USART->LSR & (LSR_THRE|LSR_TEMT)) != (LSR_THRE|LSR_TEMT) );
- while ( LPC_USART->LSR & LSR_RDR )
- {
- regVal = LPC_USART->RBR; /* Dump data from RX FIFO */
- }
-
- /* Enable the UART Interrupt */
- NVIC_EnableIRQ(UART_IRQn);
-
-#if CONFIG_UART_ENABLE_INTERRUPT==1
-#if CONFIG_UART_ENABLE_TX_INTERRUPT==1
- LPC_USART->IER = IER_RBR | IER_THRE | IER_RLS; /* Enable UART interrupt */
-#else
- LPC_USART->IER = IER_RBR | IER_RLS; /* Enable UART interrupt */
-#endif
-#endif
- return;
-}
-
-/*****************************************************************************
-** Function name: UARTSend
-**
-** Descriptions: Send a block of data to the UART 0 port based
-** on the data length
-**
-** parameters: buffer pointer, and data length
-** Returned value: None
-**
-*****************************************************************************/
-void UARTSend(uint8_t *BufferPtr, uint32_t Length)
-{
-
- while ( Length != 0 )
- {
- /* THRE status, contain valid data */
-#if CONFIG_UART_ENABLE_TX_INTERRUPT==1
- /* Below flag is set inside the interrupt handler when THRE occurs. */
- while ( !(UARTTxEmpty & 0x01) );
- LPC_USART->THR = *BufferPtr;
- UARTTxEmpty = 0; /* not empty in the THR until it shifts out */
-#else
- while ( !(LPC_USART->LSR & LSR_THRE) );
- LPC_USART->THR = *BufferPtr;
-#endif
- BufferPtr++;
- Length--;
- }
- return;
-}
-
-/******************************************************************************
-** End Of File
-******************************************************************************/
diff --git a/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.h b/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.h
deleted file mode 100644
index 8b8d2eb86..000000000
--- a/hw/mcu/nxp/lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*****************************************************************************
- * uart.h: Header file for NXP LPC1xxx Family Microprocessors
- *
- * Copyright(C) 2008, NXP Semiconductor
- * All rights reserved.
- *
- * History
- * 2009.12.07 ver 1.00 Preliminary version, first Release
- *
-******************************************************************************/
-#ifndef __UART_H
-#define __UART_H
-
-#define RS485_ENABLED 0
-#define TX_INTERRUPT 0 /* 0 if TX uses polling, 1 interrupt driven. */
-#define MODEM_TEST 0
-
-#define IER_RBR 0x01
-#define IER_THRE 0x02
-#define IER_RLS 0x04
-
-#define IIR_PEND 0x01
-#define IIR_RLS 0x03
-#define IIR_RDA 0x02
-#define IIR_CTI 0x06
-#define IIR_THRE 0x01
-
-#define LSR_RDR 0x01
-#define LSR_OE 0x02
-#define LSR_PE 0x04
-#define LSR_FE 0x08
-#define LSR_BI 0x10
-#define LSR_THRE 0x20
-#define LSR_TEMT 0x40
-#define LSR_RXFE 0x80
-
-#define BUFSIZE 0x40
-
-/* RS485 mode definition. */
-#define RS485_NMMEN (0x1<<0)
-#define RS485_RXDIS (0x1<<1)
-#define RS485_AADEN (0x1<<2)
-#define RS485_SEL (0x1<<3)
-#define RS485_DCTRL (0x1<<4)
-#define RS485_OINV (0x1<<5)
-
-void ModemInit( void );
-void UARTInit(uint32_t Baudrate);
-void UART_IRQHandler(void);
-void UARTSend(uint8_t *BufferPtr, uint32_t Length);
-
-#endif /* end __UART_H */
-/*****************************************************************************
-** End Of File
-******************************************************************************/
diff --git a/hw/mcu/nxp/lpc11uxx/hal_mcu/hal_lpc11uxx.c b/hw/mcu/nxp/lpc11uxx/hal_mcu/hal_lpc11uxx.c
deleted file mode 100644
index 5797d7c5b..000000000
--- a/hw/mcu/nxp/lpc11uxx/hal_mcu/hal_lpc11uxx.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/**************************************************************************/
-/*!
- @file hal_lpc11uxx.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "common/tusb_common.h"
-#include "hal.h"
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC11UXX
-
-void tusb_hal_int_enable(uint8_t rhport)
-{
- (void) rhport; // discard compiler's warning
- NVIC_EnableIRQ(USB_IRQn);
-}
-
-void tusb_hal_int_disable(uint8_t rhport)
-{
- (void) rhport; // discard compiler's warning
- NVIC_DisableIRQ(USB_IRQn);
-}
-
-bool tusb_hal_init(void)
-{
- // TODO remove magic number
- /* Enable AHB clock to the USB block and USB RAM. */
- LPC_SYSCON->SYSAHBCLKCTRL |= ((0x1<<14) | (0x1<<27));
- LPC_SYSCON->PDRUNCFG &= ~( BIT_(8) | BIT_(10) ); // enable USB PLL & USB transceiver
-
- /* Pull-down is needed, or internally, VBUS will be floating. This is to
- address the wrong status in VBUSDebouncing bit in CmdStatus register. */
- // set PIO0_3 as USB_VBUS
- LPC_IOCON->PIO0_3 &= ~0x1F;
- LPC_IOCON->PIO0_3 |= (0x01<<0) | (1 << 3); /* Secondary function VBUS */
-
- // set PIO0_6 as usb connect
- LPC_IOCON->PIO0_6 &= ~0x07;
- LPC_IOCON->PIO0_6 |= (0x01<<0); /* Secondary function SoftConn */
-
- return true;
-}
-
-void USB_IRQHandler(void)
-{
- hal_dcd_isr(0);
-}
-
-#endif
diff --git a/hw/mcu/nxp/lpc11uxx/hal_mcu/hal_mcu.h b/hw/mcu/nxp/lpc11uxx/hal_mcu/hal_mcu.h
deleted file mode 100644
index 7e17fe53a..000000000
--- a/hw/mcu/nxp/lpc11uxx/hal_mcu/hal_mcu.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/**************************************************************************/
-/*!
- @file hal_lpc11uxx.h
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#ifndef _TUSB_HAL_MCU_H_
-#define _TUSB_HAL_MCU_H_
-
-#include "LPC11Uxx.h"
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_HAL_MCU_H_ */
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-17 11:27:59 +0000