diff options
| author | hathach <[email protected]> | 2014-03-12 17:18:50 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2014-03-12 17:18:50 +0700 |
| commit | d98bc0a64bb7ff468eb0ccede7ef14deb4a90bbf (patch) | |
| tree | 0d19762d58e7cb83e596b893f30266c4deb11132 /demos | |
| parent | a7e14b4646904191899ce4c1b9b88381a5ff4892 (diff) | |
move boards to root folder
Diffstat (limited to 'demos')
45 files changed, 0 insertions, 6344 deletions
diff --git a/demos/bsp/boards/ansi_escape.h b/demos/bsp/boards/ansi_escape.h deleted file mode 100644 index c0b59c074..000000000 --- a/demos/bsp/boards/ansi_escape.h +++ /dev/null @@ -1,106 +0,0 @@ -/**************************************************************************/
-/*!
- @file ansi_esc_code.h
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-/** \file
- * \brief TBD
- *
- * \note TBD
- */
-
-/** \ingroup TBD
- * \defgroup TBD
- * \brief TBD
- *
- * @{
- */
-
-#ifndef _TUSB_ANSI_ESC_CODE_H_
-#define _TUSB_ANSI_ESC_CODE_H_
-
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define CSI_CODE(seq) "\33[" seq
-#define CSI_SGR(x) CSI_CODE(#x) "m"
-
-//------------- Cursor movement -------------//
-#define ANSI_CURSOR_UP(n) CSI_CODE(#n "A")
-#define ANSI_CURSOR_DOWN(n) CSI_CODE(#n "B")
-#define ANSI_CURSOR_FORWARD(n) CSI_CODE(#n "C")
-#define ANSI_CURSOR_BACKWARD(n) CSI_CODE(#n "D")
-#define ANSI_CURSOR_LINE_DOWN(n) CSI_CODE(#n "E")
-#define ANSI_CURSOR_LINE_UP(n) CSI_CODE(#n "F")
-#define ANSI_CURSOR_POSITION(n, m) CSI_CODE(#n ";" #m "H")
-
-#define ANSI_ERASE_SCREEN(n) CSI_CODE(#n "J")
-#define ANSI_ERASE_LINE(n) CSI_CODE(#n "K")
-
-#define ANSI_SCROLL_UP(n) CSI_CODE(#n "S")
-#define ANSI_SCROLL_DOWN(n) CSI_CODE(#n "T")
-
-/** text color */
-#define ANSI_TEXT_BLACK CSI_SGR(30)
-#define ANSI_TEXT_RED CSI_SGR(31)
-#define ANSI_TEXT_GREEN CSI_SGR(32)
-#define ANSI_TEXT_YELLOW CSI_SGR(33)
-#define ANSI_TEXT_BLUE CSI_SGR(34)
-#define ANSI_TEXT_MAGENTA CSI_SGR(35)
-#define ANSI_TEXT_CYAN CSI_SGR(36)
-#define ANSI_TEXT_WHITE CSI_SGR(37)
-#define ANSI_TEXT_DEFAULT CSI_SGR(39)
-
-/** background color */
-#define ANSI_BG_BLACK CSI_SGR(40)
-#define ANSI_BG_RED CSI_SGR(41)
-#define ANSI_BG_GREEN CSI_SGR(42)
-#define ANSI_BG_YELLOW CSI_SGR(43)
-#define ANSI_BG_BLUE CSI_SGR(44)
-#define ANSI_BG_MAGENTA CSI_SGR(45)
-#define ANSI_BG_CYAN CSI_SGR(46)
-#define ANSI_BG_WHITE CSI_SGR(47)
-#define ANSI_BG_DEFAULT CSI_SGR(49)
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_ANSI_ESC_CODE_H_ */
-
-/** @} */
diff --git a/demos/bsp/boards/board.c b/demos/bsp/boards/board.c deleted file mode 100644 index aae65ca25..000000000 --- a/demos/bsp/boards/board.c +++ /dev/null @@ -1,150 +0,0 @@ -/**************************************************************************/
-/*!
- @file board.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "board.h"
-
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
-volatile uint32_t system_ticks = 0;
-
-void SysTick_Handler (void)
-{
- system_ticks++;
- tusb_tick_tock(); // TODO temporarily
-}
-
-#endif
-
-void check_failed(uint8_t *file, uint32_t line)
-{
- (void) file;
- (void) line;
-}
-
-#if 0
-
-/**
- * HardFault_HandlerAsm:
- * Alternative Hard Fault handler to help debug the reason for a fault.
- * To use, edit the vector table to reference this function in the HardFault vector
- * This code is suitable for Cortex-M3 and Cortex-M0 cores
- */
-
-// Use the 'naked' attribute so that C stacking is not used.
-__attribute__((naked))
-void HardFault_HandlerAsm(void){
- /*
- * Get the appropriate stack pointer, depending on our mode,
- * and use it as the parameter to the C handler. This function
- * will never return
- */
-
- __asm( ".syntax unified\n"
- "MOVS R0, #4 \n"
- "MOV R1, LR \n"
- "TST R0, R1 \n"
- "BEQ _MSP \n"
- "MRS R0, PSP \n"
- "B HardFault_HandlerC \n"
- "_MSP: \n"
- "MRS R0, MSP \n"
- "B HardFault_HandlerC \n"
- ".syntax divided\n") ;
-}
-
-/**
- * HardFaultHandler_C:
- * This is called from the HardFault_HandlerAsm with a pointer the Fault stack
- * as the parameter. We can then read the values from the stack and place them
- * into local variables for ease of reading.
- * We then read the various Fault Status and Address Registers to help decode
- * cause of the fault.
- * The function ends with a BKPT instruction to force control back into the debugger
- */
-void HardFault_HandlerC(unsigned long *hardfault_args){
- ATTR_UNUSED volatile unsigned long stacked_r0 ;
- ATTR_UNUSED volatile unsigned long stacked_r1 ;
- ATTR_UNUSED volatile unsigned long stacked_r2 ;
- ATTR_UNUSED volatile unsigned long stacked_r3 ;
- ATTR_UNUSED volatile unsigned long stacked_r12 ;
- ATTR_UNUSED volatile unsigned long stacked_lr ;
- ATTR_UNUSED volatile unsigned long stacked_pc ;
- ATTR_UNUSED volatile unsigned long stacked_psr ;
- ATTR_UNUSED volatile unsigned long _CFSR ;
- ATTR_UNUSED volatile unsigned long _HFSR ;
- ATTR_UNUSED volatile unsigned long _DFSR ;
- ATTR_UNUSED volatile unsigned long _AFSR ;
- ATTR_UNUSED volatile unsigned long _BFAR ;
- ATTR_UNUSED volatile unsigned long _MMAR ;
-
- stacked_r0 = ((unsigned long)hardfault_args[0]) ;
- stacked_r1 = ((unsigned long)hardfault_args[1]) ;
- stacked_r2 = ((unsigned long)hardfault_args[2]) ;
- stacked_r3 = ((unsigned long)hardfault_args[3]) ;
- stacked_r12 = ((unsigned long)hardfault_args[4]) ;
- stacked_lr = ((unsigned long)hardfault_args[5]) ;
- stacked_pc = ((unsigned long)hardfault_args[6]) ;
- stacked_psr = ((unsigned long)hardfault_args[7]) ;
-
- // Configurable Fault Status Register
- // Consists of MMSR, BFSR and UFSR
- _CFSR = (*((volatile unsigned long *)(0xE000ED28))) ;
-
- // Hard Fault Status Register
- _HFSR = (*((volatile unsigned long *)(0xE000ED2C))) ;
-
- // Debug Fault Status Register
- _DFSR = (*((volatile unsigned long *)(0xE000ED30))) ;
-
- // Auxiliary Fault Status Register
- _AFSR = (*((volatile unsigned long *)(0xE000ED3C))) ;
-
- // Read the Fault Address Registers. These may not contain valid values.
- // Check BFARVALID/MMARVALID to see if they are valid values
- // MemManage Fault Address Register
- _MMAR = (*((volatile unsigned long *)(0xE000ED34))) ;
- // Bus Fault Address Register
- _BFAR = (*((volatile unsigned long *)(0xE000ED38))) ;
-
-// if ((CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk)==CoreDebug_DHCSR_C_DEBUGEN_Msk) /* if there is debugger connected */
-// {
-// __asm("BKPT #0\n");
-// }
-
- hal_debugger_breakpoint();
-}
-#endif
diff --git a/demos/bsp/boards/board.h b/demos/bsp/boards/board.h deleted file mode 100644 index 5ac586a1c..000000000 --- a/demos/bsp/boards/board.h +++ /dev/null @@ -1,133 +0,0 @@ -/**************************************************************************/
-/*!
- @file board.h
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-/**
- * \defgroup Group_Board Boards
- * \brief TBD
- *
- * @{
- */
-
-#ifndef _TUSB_BOARD_H_
-#define _TUSB_BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include "ansi_escape.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// BOARD DEFINE
-//--------------------------------------------------------------------+
-#define BOARD_RF1GHZNODE 1
-#define BOARD_LPCXPRESSO1347 2
-
-#define BOARD_NGX4330 3
-#define BOARD_EA4357 4
-#define BOARD_MCB4300 5
-#define BOARD_HITEX4350 6
-#define BOARD_LPCXPRESSO1769 7
-
-#define BOARD_LPC4357USB 8
-#define BOARD_LPCLINK2 9
-
-//--------------------------------------------------------------------+
-// PRINTF TARGET DEFINE
-//--------------------------------------------------------------------+
-#define PRINTF_TARGET_SEMIHOST 1
-#define PRINTF_TARGET_UART 2
-#define PRINTF_TARGET_SWO 3 // aka SWV, ITM
-#define PRINTF_TARGET_NONE 4
-
-#define PRINTF(...) printf(__VA_ARGS__)
-
-#if BOARD == BOARD_NGX4330
- #include "ngx/board_ngx4330.h"
-#elif BOARD == BOARD_LPCXPRESSO1347
- #include "lpcxpresso/board_lpcxpresso1347.h"
-#elif BOARD == BOARD_RF1GHZNODE
- #include "microbuilder/board_rf1ghznode.h"
-#elif BOARD == BOARD_EA4357
- #include "embedded_artists/ea4357/board_ea4357.h"
-#elif BOARD == BOARD_MCB4300
- #include "keil/board_mcb4300.h"
-#elif BOARD == BOARD_HITEX4350
- #include "hitex/board_hitex4350.h"
-#elif BOARD == BOARD_LPCXPRESSO1769
- #include "lpcxpresso/board_lpcxpresso1769.h"
-#elif BOARD == BOARD_LPC4357USB
- #include "microbuilder/board_lpc4357usb.h"
-#elif BOARD == BOARD_LPCLINK2
- #include "lpcxpresso/board_lpclink2.h"
-#else
- #error BOARD is not defined or supported yet
-#endif
-
-//--------------------------------------------------------------------+
-// Common Configuration
-//--------------------------------------------------------------------+
-#define CFG_TICKS_PER_SECOND 1000
-#define CFG_UART_BAUDRATE 115200
-
-//--------------------------------------------------------------------+
-// Board Common API
-//--------------------------------------------------------------------+
-// Init board peripherals : Clock, UART, LEDs, Buttons
-void board_init(void);
-
-void board_leds(uint32_t on_mask, uint32_t off_mask);
-
-uint8_t board_uart_getchar(void);
-void board_uart_putchar(uint8_t c);
-
-uint32_t board_buttons(void);
-
-extern volatile uint32_t system_ticks;
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_BOARD_H_ */
-
-/** @} */
diff --git a/demos/bsp/boards/embedded_artists/ea4357/board_ea4357.c b/demos/bsp/boards/embedded_artists/ea4357/board_ea4357.c deleted file mode 100644 index d0ac98beb..000000000 --- a/demos/bsp/boards/embedded_artists/ea4357/board_ea4357.c +++ /dev/null @@ -1,175 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_ea4357.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#define BOARD_UART_PORT LPC_USART0
-#define BOARD_UART_PIN_PORT 0x0f
-#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
-#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD
-
-const static struct {
- uint8_t mux_port;
- uint8_t mux_pin;
-
- uint8_t gpio_port;
- uint8_t gpio_pin;
-}buttons[] =
-{
- {0x0a, 3, 4, 10 }, // Joystick up
- {0x09, 1, 4, 13 }, // Joystick down
- {0x0a, 2, 4, 9 }, // Joystick left
- {0x09, 0, 4, 12 }, // Joystick right
- {0x0a, 1, 4, 8 }, // Joystick press
- {0x02, 7, 0, 7 }, // SW6
-};
-
-enum {
- BOARD_BUTTON_COUNT = sizeof(buttons) / sizeof(buttons[0])
-};
-
-void board_init(void)
-{
- CGU_Init();
-
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
- SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
-#endif
-
- //------------- USB -------------//
- // USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
- scu_pinmux(0x02, 3, MD_PUP | MD_EZI, FUNC7); // USB0 VBus Power
-
- #if TUSB_CFG_CONTROLLER_0_MODE & TUSB_MODE_DEVICE
- scu_pinmux(0x09, 5, GPIO_PDN, FUNC4); // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low.
- GPIO_SetDir(5, BIT_(18), 1);
- #endif
-
- // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required
- // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host
-
- //------------- LED -------------//
- I2C_Init(LPC_I2C0, 100000);
- I2C_Cmd(LPC_I2C0, ENABLE);
- pca9532_init();
-
- //------------- BUTTON -------------//
- for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++)
- {
- scu_pinmux(buttons[i].mux_port, buttons[i].mux_pin, GPIO_NOPULL, FUNC0);
- GPIO_SetDir(buttons[i].gpio_port, BIT_(buttons[i].gpio_pin), 0);
- }
-
- //------------- UART -------------//
- scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1);
- scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1);
-
- UART_CFG_Type UARTConfigStruct;
- UART_ConfigStructInit(&UARTConfigStruct);
- UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
- UARTConfigStruct.Clock_Speed = 0;
-
- UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
- UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
-
- //------------- NAND Flash (K9FXX) Size = 128M, Page Size = 2K, Block Size = 128K, Number of Block = 1024 -------------//
-// nand_init();
-
-
-#if 0
- //------------- Ethernet -------------//
- LPC_CREG->CREG6 &= ~0x7;
-
- /* RMII mode setup only */
- LPC_CREG->CREG6 |= 0x4;
-
- scu_pinmux(0x1, 18, (MD_EHS | MD_PLN | MD_ZI) , FUNC3); // ENET TXD0
- scu_pinmux(0x1, 20, (MD_EHS | MD_PLN | MD_ZI) , FUNC3); // ENET TXD1
- scu_pinmux(0x0, 1 , (MD_EHS | MD_PLN | MD_ZI) , FUNC6); // ENET TX Enable
-
- scu_pinmux(0x1, 15, (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET RXD0
- scu_pinmux(0x0, 0 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC2); // ENET RXD1
- scu_pinmux(0x1, 16, (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC7); // ENET RX Data Valid
-
- scu_pinmux(0x1, 19, (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC0); // ENET REF CLK
- scu_pinmux(0x1, 17, (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET MDIO
- scu_pinmux(0xC, 1 , (MD_EHS | MD_PLN | MD_ZI) , FUNC3); // ENET MDC
-#endif
-
-}
-
-//--------------------------------------------------------------------+
-// LEDS
-//--------------------------------------------------------------------+
-void board_leds(uint32_t on_mask, uint32_t off_mask)
-{
- pca9532_setLeds( on_mask << 8, off_mask << 8);
-}
-
-//--------------------------------------------------------------------+
-// BUTTONS
-//--------------------------------------------------------------------+
-static bool button_read(uint8_t id)
-{
- return !BIT_TEST_( GPIO_ReadValue(buttons[id].gpio_port), buttons[id].gpio_pin ); // button is active low
-}
-
-uint32_t board_buttons(void)
-{
- uint32_t result = 0;
-
- for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) result |= (button_read(i) ? BIT_(i) : 0);
-
- return result;
-}
-
-//--------------------------------------------------------------------+
-// UART
-//--------------------------------------------------------------------+
-uint8_t board_uart_getchar(void)
-{
- return UART_ReceiveByte(BOARD_UART_PORT);
-}
-void board_uart_putchar(uint8_t c)
-{
- UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING);
-}
-
-#endif
diff --git a/demos/bsp/boards/embedded_artists/ea4357/board_ea4357.h b/demos/bsp/boards/embedded_artists/ea4357/board_ea4357.h deleted file mode 100644 index a4bfe9fa5..000000000 --- a/demos/bsp/boards/embedded_artists/ea4357/board_ea4357.h +++ /dev/null @@ -1,74 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_ea4357.h
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-/** \ingroup TBD
- * \defgroup TBD
- * \brief TBD
- *
- * @{
- */
-
-#ifndef _TUSB_BOARD_EA4357_H_
-#define _TUSB_BOARD_EA4357_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include "LPC43xx.h"
-#include "lpc43xx_scu.h"
-#include "lpc43xx_cgu.h"
-#include "lpc43xx_gpio.h"
-#include "lpc43xx_uart.h"
-#include "lpc43xx_i2c.h"
-
-
-#include "../oem_base_board/pca9532.h" // LEDs
-//#include "../oem_board/nand.h"a
-
-
-//#define CFG_PRINTF_TARGET PRINTF_TARGET_SWO
-#define CFG_PRINTF_TARGET PRINTF_TARGET_UART // FIXME keil's cmsis rtx does not work with UART (work with SWO)
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_BOARD_EA4357_H_ */
-
-/** @} */
diff --git a/demos/bsp/boards/embedded_artists/ea4357/emac.c b/demos/bsp/boards/embedded_artists/ea4357/emac.c deleted file mode 100644 index d7b6ae783..000000000 --- a/demos/bsp/boards/embedded_artists/ea4357/emac.c +++ /dev/null @@ -1,480 +0,0 @@ -/******************************************************************
- ***** *****
- ***** Name: cs8900.c *****
- ***** Ver.: 1.0 *****
- ***** Date: 07/05/2001 *****
- ***** Auth: Andreas Dannenberg *****
- ***** HTWK Leipzig *****
- ***** university of applied sciences *****
- ***** Germany *****
- ***** Func: ethernet packet-driver for use with LAN- *****
- ***** controller CS8900 from Crystal/Cirrus Logic *****
- ***** *****
- ***** NXP: Module modified for use with NXP *****
- ***** lpc43xx EMAC Ethernet controller *****
- ***** *****
- ******************************************************************/
-
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include "EMAC.h"
-//#include "tcpip.h"
-#include "lpc43xx.h"
-#include "lpc43xx_scu.h"
-#include "lpc43xx_rgu.h"
-
-#define TIMEOUT 100000
-
-static unsigned short *rptr;
-static unsigned short *tptr;
-
-static unsigned int TxDescIndex = 0;
-static unsigned int RxDescIndex = 0;
-
-// Keil: function added to write PHY
-static void write_PHY (unsigned int PhyReg, unsigned short Value) {
-
- unsigned int tout;
-
- /* Write a data 'Value' to PHY register 'PhyReg'. */
- while(LPC_ETHERNET->MAC_MII_ADDR & GMII_BUSY); // Check GMII busy bit
- LPC_ETHERNET->MAC_MII_ADDR = (DP83848C_DEF_ADR<<11) | (PhyReg<<6) | GMII_WRITE;
- LPC_ETHERNET->MAC_MII_DATA = Value;
- LPC_ETHERNET->MAC_MII_ADDR |= GMII_BUSY; // Start PHY Write Cycle
-
- /* Wait utill operation completed */
- for (tout = 0; tout < MII_WR_TOUT; tout++) {
- if ((LPC_ETHERNET->MAC_MII_ADDR & GMII_BUSY) == 0) {
- break;
- }
- }
- if (tout == MII_WR_TOUT) // Trap the timeout
- while(1);
-}
-
-
-// Keil: function added to read PHY
-static unsigned short read_PHY (unsigned int PhyReg) {
-
- unsigned int tout, val;
-
- /* Read a PHY register 'PhyReg'. */
- while(LPC_ETHERNET->MAC_MII_ADDR & GMII_BUSY); // Check GMII busy bit
- LPC_ETHERNET->MAC_MII_ADDR = (DP83848C_DEF_ADR<<11) | (PhyReg<<6) | GMII_READ;
- LPC_ETHERNET->MAC_MII_ADDR |= GMII_BUSY; // Start PHY Read Cycle
-
- /* Wait until operation completed */
- for (tout = 0; tout < MII_RD_TOUT; tout++) {
- if ((LPC_ETHERNET->MAC_MII_ADDR & GMII_BUSY) == 0) {
- break;
- }
- }
- if (tout == MII_RD_TOUT) // Trap the timeout
- while(1);
- val = LPC_ETHERNET->MAC_MII_DATA;
- return (val);
-}
-
-
-// Keil: function added to initialize Rx Descriptors
-void rx_descr_init (void)
-{
- unsigned int i;
-
- for (i = 0; i < NUM_RX_DESC; i++) {
- RX_DESC_STAT(i) = OWN_BIT;
- RX_DESC_CTRL(i) = ETH_FRAG_SIZE;
- RX_BUFADDR(i) = RX_BUF(i);
- if (i == (NUM_RX_DESC-1)) // Last Descriptor?
- RX_DESC_CTRL(i) |= RX_END_RING;
- }
-
- /* Set Starting address of RX Descriptor list */
- LPC_ETHERNET->DMA_REC_DES_ADDR = RX_DESC_BASE;
-}
-
-
-// Keil: function added to initialize Tx Descriptors
-void tx_descr_init (void)
-{
- unsigned int i;
-
- for (i = 0; i < NUM_TX_DESC; i++) { // Take it out!!!!
- TX_DESC_STAT(i) = 0;
- TX_DESC_CTRL(i) = 0;
- TX_BUFADDR(i) = 0;
- }
-
- for (i = 0; i < NUM_TX_DESC; i++) {
- TX_DESC_STAT(i) = TX_LAST_SEGM | TX_FIRST_SEGM;
- TX_DESC_CTRL(i) = 0;
- TX_BUFADDR(i) = TX_BUF(i);
- if (i == (NUM_TX_DESC-1)) // Last Descriptor?
- TX_DESC_STAT(i) |= TX_END_RING;
- }
-
- /* Set Starting address of RX Descriptor list */
- LPC_ETHERNET->DMA_TRANS_DES_ADDR = TX_DESC_BASE;
-}
-
-
-
-// configure port-pins for use with LAN-controller,
-// reset it and send the configuration-sequence
-
-void Init_EMAC(void)
-{
- int id1, id2, tout, regv;
- unsigned phy_in_use = 0;
-
- /* Ethernet pins configuration */
-#if MII
- scu_pinmux(0xC ,1 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_MDC: PC_1 -> FUNC3
- scu_pinmux(0x1 ,17 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_MDIO: P1_17 -> FUNC3
- scu_pinmux(0x1 ,18 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TXD0: P1_18 -> FUNC3
- scu_pinmux(0x1 ,20 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TXD1: P1_20 -> FUNC3
- scu_pinmux(0x1 ,19 , (MD_PLN | MD_EZI | MD_ZI), FUNC0); // ENET_REF: P1_19 -> FUNC0 (default)
-
-// scu_pinmux(0xC ,4 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TX_EN: PC_4 -> FUNC3
- scu_pinmux(0x0 ,1 , (MD_PLN | MD_EZI | MD_ZI), FUNC6); // ENET_TX_EN: P0_1 -> FUNC6
-
- scu_pinmux(0x1 ,15 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_RXD0: P1_15 -> FUNC3
- scu_pinmux(0x0 ,0 , (MD_PLN | MD_EZI | MD_ZI), FUNC2); // ENET_RXD1: P0_0 -> FUNC2
-
-// scu_pinmux(0x1 ,16 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_CRS: P1_16 -> FUNC3
- scu_pinmux(0x9 ,0 , (MD_PLN | MD_EZI | MD_ZI), FUNC5); // ENET_CRS: P9_0 -> FUNC5
-
-// scu_pinmux(0xC ,9 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_RX_ER: PC_9 -> FUNC3
- scu_pinmux(0x9 ,1 , (MD_PLN | MD_EZI | MD_ZI), FUNC5); // ENET_RX_ER: P9_1 -> FUNC5
-
-// scu_pinmux(0xC ,8 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_RXDV: PC_8 -> FUNC3
- scu_pinmux(0x1 ,16 , (MD_PLN | MD_EZI | MD_ZI), FUNC7); // ENET_RXDV: P1_16 -> FUNC7
-
-#else
- scu_pinmux(0xC ,1 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_MDC: PC_1 -> FUNC3
- scu_pinmux(0x1 ,17 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_MDIO: P1_17 -> FUNC3
- scu_pinmux(0x1 ,18 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TXD0: P1_18 -> FUNC3
- scu_pinmux(0x1 ,20 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TXD1: P1_20 -> FUNC3
- scu_pinmux(0x1 ,19 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC0); // ENET_REF: P1_19 -> FUNC0 (default)
-// scu_pinmux(0xC ,4 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TX_EN: PC_4 -> FUNC3
- scu_pinmux(0x0 ,1 , (MD_PLN | MD_EZI | MD_ZI), FUNC6); // ENET_TX_EN: P0_1 -> FUNC6
- scu_pinmux(0x1 ,15 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_RXD0: P1_15 -> FUNC3
- scu_pinmux(0x0 ,0 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC2); // ENET_RXD1: P0_0 -> FUNC2
-// scu_pinmux(0x1 ,16 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_CRS: P1_16 -> FUNC3
-// scu_pinmux(0x9 ,0 , (MD_PLN | MD_EZI | MD_ZI), FUNC5); // ENET_CRS: P9_0 -> FUNC5
-// scu_pinmux(0xC ,9 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_RX_ER: PC_9 -> FUNC3
-// scu_pinmux(0x9 ,1 , (MD_PLN | MD_EZI | MD_ZI), FUNC5); // ENET_RX_ER: P9_1 -> FUNC5
-// scu_pinmux(0xC ,8 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_RXDV: PC_8 -> FUNC3
- scu_pinmux(0x1 ,16 , (MD_PLN | MD_EZI | MD_ZI), FUNC7); // ENET_RXDV: P1_16 -> FUNC7
-#endif
-
-
-#if MII /* Select MII interface */ // check MUXING for new Eagle...
-// scu_pinmux(0xC ,6 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_RXD2: PC_6 -> FUNC3
- scu_pinmux(0x9 ,3 , (MD_PLN | MD_EZI | MD_ZI), FUNC5); // ENET_RXD2: P9_3 -> FUNC5
-
-// scu_pinmux(0xC ,7 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_RXD3: PC_7 -> FUNC3
- scu_pinmux(0x9 ,2 , (MD_PLN | MD_EZI | MD_ZI), FUNC5); // ENET_RXD3: P9_2 -> FUNC5
-
- scu_pinmux(0xC ,0 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_RXLK: PC_0 -> FUNC3
-
-// scu_pinmux(0xC ,2 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TXD2: PC_2 -> FUNC3
- scu_pinmux(0x9 ,4 , (MD_PLN | MD_EZI | MD_ZI), FUNC5); // ENET_TXD2: P9_4 -> FUNC5
-
-// scu_pinmux(0xC ,3 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TXD3: PC_3 -> FUNC3
- scu_pinmux(0x9 ,5 , (MD_PLN | MD_EZI | MD_ZI), FUNC5); // ENET_TXD3: P9_5 -> FUNC5
-
-// scu_pinmux(0xC ,5 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TX_ER: PC_5 -> FUNC3
- scu_pinmux(0xC ,5 , (MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET_TX_ER: PC_5 -> FUNC3
-
-// scu_pinmux(0x0 ,1 , (MD_PLN | MD_EZI | MD_ZI), FUNC2); // ENET_COL: P0_1 -> FUNC2
- scu_pinmux(0x9 ,6 , (MD_PLN | MD_EZI | MD_ZI), FUNC5); // ENET_COL: P9_6 -> FUNC5
-#else /* Select RMII interface */
- LPC_CREG->CREG6 |= RMII_SELECT;
-#endif
-
-
- RGU_SoftReset(RGU_SIG_ETHERNET);
- while(1){ // Confirm the reset happened
- if (LPC_RGU->RESET_ACTIVE_STATUS0 & (1<<ETHERNET_RST))
- break;
- }
-
- LPC_ETHERNET->DMA_BUS_MODE |= DMA_SOFT_RESET; // Reset all GMAC Subsystem internal registers and logic
- while(LPC_ETHERNET->DMA_BUS_MODE & DMA_SOFT_RESET); // Wait for software reset completion
-
- /* Put the DP83848C in reset mode */
- write_PHY (PHY_REG_BMCR, PHY_BMCR_RESET);
-
- /* Wait for hardware reset to end. */
- for (tout = 0; tout < TIMEOUT; tout++) {
- regv = read_PHY (PHY_REG_BMCR);
- if (!(regv & PHY_BMCR_RESET)) {
- /* Reset complete */
- break;
- }
- }
-
- /* Check if this is a DP83848C PHY. */
- id1 = read_PHY (PHY_REG_IDR1);
- id2 = read_PHY (PHY_REG_IDR2);
- if (((id1 << 16) | (id2 & 0xFFF0)) == DP83848C_ID) {
- phy_in_use = DP83848C_ID;
- }
- else if (((id1 << 16) | (id2 & 0xFFF0)) == LAN8720_ID) {
- phy_in_use = LAN8720_ID;
- }
-
- if (phy_in_use != 0) {
- /* Configure the PHY device */
-#if !MII
- write_PHY (PHY_REG_RBR, 0x20);
-#endif
-
- /* Use autonegotiation about the link speed. */
- write_PHY (PHY_REG_BMCR, PHY_AUTO_NEG);
- /* Wait to complete Auto_Negotiation. */
- for (tout = 0; tout < TIMEOUT; tout++) {
- regv = read_PHY (PHY_REG_BMSR);
- if (regv & PHY_AUTO_NEG_DONE) {
- /* Autonegotiation Complete. */
- break;
- }
- }
- }
-
-
-
- /* Check the link status. */
- for (tout = 0; tout < TIMEOUT; tout++) {
- regv = read_PHY (PHY_REG_STS);
- if (regv & LINK_VALID_STS) {
- /* Link is on. */
- break;
- }
- }
-
- // Configure the EMAC with the established parameters
- switch (phy_in_use) {
- case DP83848C_ID:
-
- /* Configure Full/Half Duplex mode. */
- if (regv & FULL_DUP_STS) {
- /* Full duplex is enabled. */
- LPC_ETHERNET->MAC_CONFIG |= MAC_DUPMODE;
- }
-
- /* Configure 100MBit/10MBit mode. */
- if (~(regv & SPEED_10M_STS)) {
- /* 100MBit mode. */
- LPC_ETHERNET->MAC_CONFIG |= MAC_100MPS;
- }
-
-// value = ReadFromPHY (PHY_REG_STS); /* PHY Extended Status Register */
-// // Now configure for full/half duplex mode
-// if (value & 0x0004) {
-// // We are in full duplex is enabled mode
-// LPC_ETHERNET->MAC2 |= MAC2_FULL_DUP;
-// LPC_ETHERNET->Command |= CR_FULL_DUP;
-// LPC_ETHERNET->IPGT = IPGT_FULL_DUP;
-// }
-// else {
-// // Otherwise we are in half duplex mode
-// LPC_ETHERNET->IPGT = IPGT_HALF_DUP;
-// }
-
-// // Now configure 100MBit or 10MBit mode
-// if (value & 0x0002) {
-// // 10MBit mode
-// LPC_ETHERNET->SUPP = 0;
-// }
-// else {
-// // 100MBit mode
-// LPC_ETHERNET->SUPP = SUPP_SPEED;
-// }
- break;
-
- case LAN8720_ID:
-
- regv = read_PHY (PHY_REG_SCSR); /* PHY Extended Status Register */
- // Now configure for full/half duplex mode
- if (regv & (1<<4)) { /* bit 4: 1 = Full Duplex, 0 = Half Duplex */
- // We are in full duplex is enabled mode
- LPC_ETHERNET->MAC_CONFIG |= MAC_DUPMODE;
- }
-
- // Now configure 100MBit or 10MBit mode
- if (regv & (1<<3)) { /* bit 3: 1 = 100Mbps, 0 = 10Mbps */
- // 100MBit mode
- LPC_ETHERNET->MAC_CONFIG |= MAC_100MPS;
- }
-
-
- break;
-
- }
-
- /* Set the Ethernet MAC Address registers */
- LPC_ETHERNET->MAC_ADDR0_HIGH = (MYMAC_6 << 8) | MYMAC_5;
- LPC_ETHERNET->MAC_ADDR0_LOW = (MYMAC_4 << 24) | (MYMAC_3 << 16) | (MYMAC_2 << 8) | MYMAC_1;
-
- /* Initialize Descriptor Lists */
- rx_descr_init();
- tx_descr_init();
-
- /* Configure Filter */
- LPC_ETHERNET->MAC_FRAME_FILTER = MAC_PROMISCUOUS | MAC_RECEIVEALL;
-
- /* Enable Receiver and Transmitter */
- LPC_ETHERNET->MAC_CONFIG |= (MAC_TX_ENABLE | MAC_RX_ENABLE);
-
- /* Enable interrupts */
- //LPC_ETHERNET->DMA_INT_EN = DMA_INT_NOR_SUM | DMA_INT_RECEIVE | DMA_INT_TRANSMIT;
-
- /* Start Transmission & Receive processes */
- LPC_ETHERNET->DMA_OP_MODE |= (DMA_SS_TRANSMIT | DMA_SS_RECEIVE );
-
-}
-
-
-// reads a word in little-endian byte order from RX_BUFFER
-
-unsigned short ReadFrame_EMAC(void)
-{
- return (*rptr++);
-}
-
-
-// easyWEB internal function
-// help function to swap the byte order of a WORD
-
-unsigned short SwapBytes(unsigned short Data)
-{
- return (Data >> 8) | (Data << 8);
-}
-
-// reads a word in big-endian byte order from RX_FRAME_PORT
-// (useful to avoid permanent byte-swapping while reading
-// TCP/IP-data)
-
-unsigned short ReadFrameBE_EMAC(void)
-{
- unsigned short ReturnValue;
-
- ReturnValue = SwapBytes (*rptr++);
- return (ReturnValue);
-}
-
-
-// copies bytes from frame port to MCU-memory
-// NOTES: * an odd number of byte may only be transfered
-// if the frame is read to the end!
-// * MCU-memory MUST start at word-boundary
-
-void CopyFromFrame_EMAC(void *Dest, unsigned short Size)
-{
- unsigned short * piDest; // Keil: Pointer added to correct expression
-
- piDest = Dest; // Keil: Line added
- while (Size > 1) {
- *piDest++ = ReadFrame_EMAC();
- Size -= 2;
- }
-
- if (Size) { // check for leftover byte...
- *(unsigned char *)piDest = (char)ReadFrame_EMAC();// the LAN-Controller will return 0
- } // for the highbyte
-}
-
-// does a dummy read on frame-I/O-port
-// NOTE: only an even number of bytes is read!
-
-void DummyReadFrame_EMAC(unsigned short Size) // discards an EVEN number of bytes
-{ // from RX-fifo
- while (Size > 1) {
- ReadFrame_EMAC();
- Size -= 2;
- }
-}
-
-// Reads the length of the received ethernet frame and checks if the
-// destination address is a broadcast message or not
-// returns the frame length
-unsigned short StartReadFrame(void) {
- unsigned short RxLen;
-
- if ((RX_DESC_STAT(RxDescIndex) & OWN_BIT) == 0) {
- RxLen = (RX_DESC_STAT(RxDescIndex) >> 16) & 0x03FFF;
- rptr = (unsigned short *)RX_BUFADDR(RxDescIndex);
- return(RxLen);
- }
- return 0;
-
-}
-
-void EndReadFrame(void) {
-
- RX_DESC_STAT(RxDescIndex) = OWN_BIT;
- RxDescIndex++;
- if (RxDescIndex == NUM_RX_DESC)
- RxDescIndex = 0;
-}
-
-unsigned int CheckFrameReceived(void) { // Packet received ?
-
- if ((RX_DESC_STAT(RxDescIndex) & OWN_BIT) == 0)
- return(1);
- else
- return(0);
-}
-
-// requests space in EMAC memory for storing an outgoing frame
-
-void RequestSend(unsigned short FrameSize)
-{
- tptr = (unsigned short *)TX_BUFADDR(TxDescIndex);
- TX_DESC_CTRL(TxDescIndex) = FrameSize;
-}
-
-// check if ethernet controller is ready to accept the
-// frame we want to send
-
-unsigned int Rdy4Tx(void)
-{
- return (1); // the ethernet controller transmits much faster
-} // than the CPU can load its buffers
-
-
-// writes a word in little-endian byte order to TX_BUFFER
-void WriteFrame_EMAC(unsigned short Data)
-{
- *tptr++ = Data;
-}
-
-// copies bytes from MCU-memory to frame port
-// NOTES: * an odd number of byte may only be transfered
-// if the frame is written to the end!
-// * MCU-memory MUST start at word-boundary
-
-void CopyToFrame_EMAC(void *Source, unsigned int Size)
-{
- unsigned short * piSource;
-// unsigned int idx;
-
- piSource = Source;
- Size = (Size + 1) & 0xFFFE; // round Size up to next even number
- while (Size > 0) {
- WriteFrame_EMAC(*piSource++);
- Size -= 2;
- }
- TX_DESC_STAT(TxDescIndex) |= OWN_BIT;
- LPC_ETHERNET->DMA_TRANS_POLL_DEMAND = 1; // Wake Up the DMA if it's in Suspended Mode
- TxDescIndex++;
- if (TxDescIndex == NUM_TX_DESC)
- TxDescIndex = 0;
-}
-
-#endif
-
diff --git a/demos/bsp/boards/embedded_artists/ea4357/emac.h b/demos/bsp/boards/embedded_artists/ea4357/emac.h deleted file mode 100644 index 03ba5e57d..000000000 --- a/demos/bsp/boards/embedded_artists/ea4357/emac.h +++ /dev/null @@ -1,157 +0,0 @@ -#ifndef __EMAC_H
-#define __EMAC_H
-
-
-/* Configuration */
-
-/* Interface Selection */
-#define MII 0 // =0 RMII - =1 MII
-
-/* MAC Configuration */
-#define MYMAC_1 0x1EU /* our ethernet (MAC) address */
-#define MYMAC_2 0x30U /* (MUST be unique in LAN!) */
-#define MYMAC_3 0x6cU
-#define MYMAC_4 0xa2U
-#define MYMAC_5 0x45U
-#define MYMAC_6 0x5eU
-
-
-#define ETH_FRAG_SIZE 1536
-#define NUM_RX_DESC 3
-#define NUM_TX_DESC 3
-
-/* End of Configuration */
-
-
-/* EMAC Descriptors and Buffers located in 16K SRAM */
-/* Rx Descriptors */
-#define RX_DESC_BASE 0x20008000
-#define RX_STAT_BASE RX_DESC_BASE
-#define RX_CTRL_BASE (RX_STAT_BASE + 4)
-#define RX_BUFADDR_BASE (RX_CTRL_BASE + 4)
-#define RX_NEXTDESC_BASE (RX_BUFADDR_BASE + 4)
-#define RX_BUF_BASE (RX_DESC_BASE + NUM_RX_DESC*16)
-
-#define RX_DESC_STAT(i) (*(unsigned int *)(RX_STAT_BASE + 16*i))
-#define RX_DESC_CTRL(i) (*(unsigned int *)(RX_CTRL_BASE + 16*i))
-#define RX_BUFADDR(i) (*(unsigned int *)(RX_BUFADDR_BASE + 16*i))
-#define RX_NEXTDESC(i) (*(unsigned int *)(RX_NEXTDESC_BASE + 16*i))
-#define RX_BUF(i) (RX_BUF_BASE + ETH_FRAG_SIZE*i)
-
-/* Tx Descriptors */
-#define TX_DESC_BASE RX_BUF_BASE + (ETH_FRAG_SIZE * NUM_RX_DESC)
-#define TX_STAT_BASE TX_DESC_BASE
-#define TX_CTRL_BASE (TX_STAT_BASE + 4)
-#define TX_BUFADDR_BASE (TX_CTRL_BASE + 4)
-#define TX_NEXTDESC_BASE (TX_BUFADDR_BASE + 4)
-#define TX_BUF_BASE (TX_DESC_BASE + NUM_TX_DESC*16)
-
-#define TX_DESC_STAT(i) (*(unsigned int *)(TX_STAT_BASE + 16*i))
-#define TX_DESC_CTRL(i) (*(unsigned int *)(TX_CTRL_BASE + 16*i))
-#define TX_BUFADDR(i) (*(unsigned int *)(TX_BUFADDR_BASE + 16*i))
-#define TX_NEXTDESC(i) (*(unsigned int *)(TX_NEXTDESC_BASE + 16*i))
-#define TX_BUF(i) (TX_BUF_BASE + ETH_FRAG_SIZE*i)
-
-/* Descriptors Fields bits */
-#define OWN_BIT (1U<<31) /* Own bit in RDES0 & TDES0 */
-#define RX_END_RING (1<<15) /* Receive End of Ring bit in RDES1 */
-#define RX_NXTDESC_FLAG (1<<14) /* Second Address Chained bit in RDES1 */
-#define TX_LAST_SEGM (1<<29) /* Last Segment bit in TDES0 */
-#define TX_FIRST_SEGM (1<<28) /* First Segment bit in TDES0 */
-#define TX_END_RING (1<<21) /* Transmit End of Ring bit in TDES0 */
-#define TX_NXTDESC_FLAG (1<<20) /* Second Address Chained bit in TDES0 */
-
-
-
-
-
-/* EMAC Control and Status bits */
-#define MAC_RX_ENABLE (1<<2) /* Receiver Enable in MAC_CONFIG reg */
-#define MAC_TX_ENABLE (1<<3) /* Transmitter Enable in MAC_CONFIG reg */
-#define MAC_PADCRC_STRIP (1<<7) /* Automatic Pad-CRC Stripping in MAC_CONFIG reg */
-#define MAC_DUPMODE (1<<11) /* Duplex Mode in MAC_CONFIG reg */
-#define MAC_100MPS (1<<14) /* Speed is 100Mbps in MAC_CONFIG reg */
-#define MAC_PROMISCUOUS (1U<<0) /* Promiscuous Mode bit in MAC_FRAME_FILTER reg */
-#define MAC_DIS_BROAD (1U<<5) /* Disable Broadcast Frames bit in MAC_FRAME_FILTER reg */
-#define MAC_RECEIVEALL (1U<<31) /* Receive All bit in MAC_FRAME_FILTER reg */
-#define DMA_SOFT_RESET 0x01 /* Software Reset bit in DMA_BUS_MODE reg */
-#define DMA_SS_RECEIVE (1<<1) /* Start/Stop Receive bit in DMA_OP_MODE reg */
-#define DMA_SS_TRANSMIT (1<<13) /* Start/Stop Transmission bit in DMA_OP_MODE reg */
-#define DMA_INT_TRANSMIT (1<<0) /* Transmit Interrupt Enable bit in DMA_INT_EN reg */
-#define DMA_INT_OVERFLOW (1<<4) /* Overflow Interrupt Enable bit in DMA_INT_EN reg */
-#define DMA_INT_UNDERFLW (1<<5) /* Underflow Interrupt Enable bit in DMA_INT_EN reg */
-#define DMA_INT_RECEIVE (1<<6) /* Receive Interrupt Enable bit in DMA_INT_EN reg */
-#define DMA_INT_ABN_SUM (1<<15) /* Abnormal Interrupt Summary Enable bit in DMA_INT_EN reg */
-#define DMA_INT_NOR_SUM (1<<16) /* Normal Interrupt Summary Enable bit in DMA_INT_EN reg */
-
-/* MII Management Command Register */
-#define GMII_READ (0<<1) /* GMII Read PHY */
-#define GMII_WRITE (1<<1) /* GMII Write PHY */
-#define GMII_BUSY 0x00000001 /* GMII is Busy / Start Read/Write */
-#define MII_WR_TOUT 0x00050000 /* MII Write timeout count */
-#define MII_RD_TOUT 0x00050000 /* MII Read timeout count */
-
-/* MII Management Address Register */
-#define MADR_PHY_ADR 0x00001F00 /* PHY Address Mask */
-
-/* DP83848C PHY Registers */
-#define PHY_REG_BMCR 0x00 /* Basic Mode Control Register */
-#define PHY_REG_BMSR 0x01 /* Basic Mode Status Register */
-#define PHY_REG_IDR1 0x02 /* PHY Identifier 1 */
-#define PHY_REG_IDR2 0x03 /* PHY Identifier 2 */
-#define PHY_REG_ANAR 0x04 /* Auto-Negotiation Advertisement */
-#define PHY_REG_ANLPAR 0x05 /* Auto-Neg. Link Partner Abitily */
-#define PHY_REG_ANER 0x06 /* Auto-Neg. Expansion Register */
-#define PHY_REG_ANNPTR 0x07 /* Auto-Neg. Next Page TX */
-
-/* PHY Extended Registers */
-#define PHY_REG_STS 0x10 /* Status Register */
-#define PHY_REG_MICR 0x11 /* MII Interrupt Control Register */
-#define PHY_REG_MISR 0x12 /* MII Interrupt Status Register */
-#define PHY_REG_FCSCR 0x14 /* False Carrier Sense Counter */
-#define PHY_REG_RECR 0x15 /* Receive Error Counter */
-#define PHY_REG_PCSR 0x16 /* PCS Sublayer Config. and Status */
-#define PHY_REG_RBR 0x17 /* RMII and Bypass Register */
-#define PHY_REG_LEDCR 0x18 /* LED Direct Control Register */
-#define PHY_REG_PHYCR 0x19 /* PHY Control Register */
-#define PHY_REG_10BTSCR 0x1A /* 10Base-T Status/Control Register */
-#define PHY_REG_CDCTRL1 0x1B /* CD Test Control and BIST Extens. */
-#define PHY_REG_EDCR 0x1D /* Energy Detect Control Register */
-
-/* PHY Control and Status bits */
-#define PHY_FULLD_100M 0x2100 /* Full Duplex 100Mbit */
-#define PHY_HALFD_100M 0x2000 /* Half Duplex 100Mbit */
-#define PHY_FULLD_10M 0x0100 /* Full Duplex 10Mbit */
-#define PHY_HALFD_10M 0x0000 /* Half Duplex 10MBit */
-#define PHY_AUTO_NEG 0x1000 /* Select Auto Negotiation */
-#define PHY_AUTO_NEG_DONE 0x0020 /* AutoNegotiation Complete in BMSR PHY reg */
-#define PHY_BMCR_RESET 0x8000 /* Reset bit at BMCR PHY reg */
-#define LINK_VALID_STS 0x0001 /* Link Valid Status at REG_STS PHY reg */
-#define FULL_DUP_STS 0x0004 /* Full Duplex Status at REG_STS PHY reg */
-#define SPEED_10M_STS 0x0002 /* 10Mbps Status at REG_STS PHY reg */
-
-#define DP83848C_DEF_ADR 0x01 /* Default PHY device address */
-#define DP83848C_ID 0x20005C90 /* PHY Identifier (without Rev. info */
-
-#define LAN8720_ID 0x0007C0F0 /* PHY Identifier */
-#define PHY_REG_SCSR 0x1F /* PHY Special Control/Status Register */
-
-/* Misc */
-#define ETHERNET_RST 22 /* Reset Output for EMAC at RGU */
-#define RMII_SELECT 0x04 /* Select RMII in EMACCFG */
-
-
-/* Prototypes */
-void Init_EMAC(void);
-unsigned short ReadFrameBE_EMAC(void);
-void CopyToFrame_EMAC(void *Source, unsigned int Size);
-void CopyFromFrame_EMAC(void *Dest, unsigned short Size);
-void DummyReadFrame_EMAC(unsigned short Size);
-unsigned short StartReadFrame(void);
-void EndReadFrame(void);
-unsigned int CheckFrameReceived(void);
-void RequestSend(unsigned short FrameSize);
-unsigned int Rdy4Tx(void);
-
-
-#endif
diff --git a/demos/bsp/boards/embedded_artists/ea4357/nand.c b/demos/bsp/boards/embedded_artists/ea4357/nand.c deleted file mode 100644 index 62b2aea88..000000000 --- a/demos/bsp/boards/embedded_artists/ea4357/nand.c +++ /dev/null @@ -1,546 +0,0 @@ -/*****************************************************************************
- *
- * Copyright(C) 2011, Embedded Artists AB
- * All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-
-
-/******************************************************************************
- * Includes
- *****************************************************************************/
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include "lpc_types.h"
-#include "lpc43xx_scu.h"
-#include "lpc43xx_timer.h"
-#include "nand.h"
-
-
-/******************************************************************************
- * Defines and typedefs
- *****************************************************************************/
-
-#define K9F1G_CLE ((volatile uint8_t *)0x1D100000)
-#define K9F1G_ALE ((volatile uint8_t *)0x1D080000)
-#define K9F1G_DATA ((volatile uint8_t *)0x1D000000)
-
-#define K9FXX_WAIT()
-
-#define K9FXX_READ_1 0x00
-#define K9FXX_READ_2 0x30
-
-#define K9FXX_SET_ADDR_A 0x00
-#define K9FXX_SET_ADDR_B 0x01
-#define K9FXX_SET_ADDR_C 0x50
-#define K9FXX_READ_ID 0x90
-#define K9FXX_RESET 0xff
-#define K9FXX_BLOCK_PROGRAM_1 0x80
-#define K9FXX_BLOCK_PROGRAM_2 0x10
-#define K9FXX_BLOCK_ERASE_1 0x60
-#define K9FXX_BLOCK_ERASE_2 0xd0
-#define K9FXX_READ_STATUS 0x70
-#define K9FXX_BUSY (1 << 6)
-#define K9FXX_OK (1 << 0)
-
-#define ID_MARKER_CODE (0xEC)
-#define ID_SAMSUNG (0xF1)
-
-#define ID_PAGE_SZ_1KB (0x00)
-#define ID_PAGE_SZ_2KB (0x01)
-#define ID_PAGE_SZ_4KB (0x02)
-#define ID_PAGE_SZ_8KB (0x03)
-
-#define ID_BLOCK_SZ_64KB (0x00)
-#define ID_BLOCK_SZ_128KB (0x01)
-#define ID_BLOCK_SZ_256KB (0x02)
-#define ID_BLOCK_SZ_512KB (0x03)
-
-#define ID_PAGE_SZ_1KB (0x00)
-#define ID_PAGE_SZ_2KB (0x01)
-#define ID_PAGE_SZ_4KB (0x02)
-#define ID_PAGE_SZ_8KB (0x03)
-
-#define ID_REDUND_SZ_8 (0x00)
-#define ID_REDUND_SZ_16 (0x01)
-
-
-
-/* This macro could be changed to check the ready pin */
-#define WAIT_READY() (TIM_Waitus(25))
-
-
-/******************************************************************************
- * External global variables
- *****************************************************************************/
-
-/******************************************************************************
- * Local variables
- *****************************************************************************/
-
-static uint32_t pageSize = 0;
-static uint32_t blockSize = 0;
-static uint32_t reduntSize = 0;
-
-
-/******************************************************************************
- * Local Functions
- *****************************************************************************/
-
-static void pinConfig(void)
-{
- /* Set up EMC pin */
- scu_pinmux( 2 , 9 , MD_PLN_FAST , 3 );//A0
- scu_pinmux( 2 , 10 , MD_PLN_FAST , 3 );//A1
- scu_pinmux( 2 , 11 , MD_PLN_FAST , 3 );//A2
- scu_pinmux( 2 , 12 , MD_PLN_FAST , 3 );//A3
- scu_pinmux( 2 , 13 , MD_PLN_FAST , 3 );//A4
- scu_pinmux( 1 , 0 , MD_PLN_FAST , 2 );//A5
- scu_pinmux( 1 , 1 , MD_PLN_FAST , 2 );//A6
- scu_pinmux( 1 , 2 , MD_PLN_FAST , 2 );//A7
- scu_pinmux( 2 , 8 , MD_PLN_FAST , 3 );//A8
- scu_pinmux( 2 , 7 , MD_PLN_FAST , 3 );//A9
- scu_pinmux( 2 , 6 , MD_PLN_FAST , 2 );//A10
- scu_pinmux( 2 , 2 , MD_PLN_FAST , 2 );//A11
- scu_pinmux( 2 , 1 , MD_PLN_FAST , 2 );//A12
- scu_pinmux( 2 , 0 , MD_PLN_FAST , 2 );//A13
- scu_pinmux( 6 , 8 , MD_PLN_FAST , 1 );//A14
- scu_pinmux( 6 , 7 , MD_PLN_FAST , 1 );//A15
- scu_pinmux( 13 , 16 , MD_PLN_FAST , 2 );//A16
- scu_pinmux( 13 , 15 , MD_PLN_FAST , 2 );//A17
- scu_pinmux( 14 , 0 , MD_PLN_FAST , 3 );//A18
- scu_pinmux( 14 , 1 , MD_PLN_FAST , 3 );//A19
- scu_pinmux( 14 , 2 , MD_PLN_FAST , 3 );//A20
- scu_pinmux( 14 , 3 , MD_PLN_FAST , 3 );//A21
- scu_pinmux( 14 , 4 , MD_PLN_FAST , 3 );//A22
- scu_pinmux( 10 , 4 , MD_PLN_FAST , 3 );//A23
-
- scu_pinmux( 1 , 7 , MD_PLN_FAST , 3 );//D0
- scu_pinmux( 1 , 8 , MD_PLN_FAST , 3 );//D1
- scu_pinmux( 1 , 9 , MD_PLN_FAST , 3 );//D2
- scu_pinmux( 1 , 10 , MD_PLN_FAST , 3 );//D3
- scu_pinmux( 1 , 11 , MD_PLN_FAST , 3 );//D4
- scu_pinmux( 1 , 12 , MD_PLN_FAST , 3 );//D5
- scu_pinmux( 1 , 13 , MD_PLN_FAST , 3 );//D6
- scu_pinmux( 1 , 14 , MD_PLN_FAST , 3 );//D7
- scu_pinmux( 5 , 4 , MD_PLN_FAST , 2 );//D8
- scu_pinmux( 5 , 5 , MD_PLN_FAST , 2 );//D9
- scu_pinmux( 5 , 6 , MD_PLN_FAST , 2 );//D10
- scu_pinmux( 5 , 7 , MD_PLN_FAST , 2 );//D11
- scu_pinmux( 5 , 0 , MD_PLN_FAST , 2 );//D12
- scu_pinmux( 5 , 1 , MD_PLN_FAST , 2 );//D13
- scu_pinmux( 5 , 2 , MD_PLN_FAST , 2 );//D14
- scu_pinmux( 5 , 3 , MD_PLN_FAST , 2 );//D15
- scu_pinmux( 13 , 2 , MD_PLN_FAST , 2 );//D16
- scu_pinmux( 13 , 3 , MD_PLN_FAST , 2 );//D17
- scu_pinmux( 13 , 4 , MD_PLN_FAST , 2 );//D18
- scu_pinmux( 13 , 5 , MD_PLN_FAST , 2 );//D19
- scu_pinmux( 13 , 6 , MD_PLN_FAST , 2 );//D20
- scu_pinmux( 13 , 7 , MD_PLN_FAST , 2 );//D21
- scu_pinmux( 13 , 8 , MD_PLN_FAST , 2 );//D22
- scu_pinmux( 13 , 9 , MD_PLN_FAST , 2 );//D23
- scu_pinmux( 14 , 5 , MD_PLN_FAST , 3 );//D24
- scu_pinmux( 14 , 6 , MD_PLN_FAST , 3 );//D25
- scu_pinmux( 14 , 7 , MD_PLN_FAST , 3 );//D26
- scu_pinmux( 14 , 8 , MD_PLN_FAST , 3 );//D27
- scu_pinmux( 14 , 9 , MD_PLN_FAST , 3 );//D28
- scu_pinmux( 14 , 10 , MD_PLN_FAST , 3 );//D29
- scu_pinmux( 14 , 11 , MD_PLN_FAST , 3 );//D30
- scu_pinmux( 14 , 12 , MD_PLN_FAST , 3 );//D31
-
- scu_pinmux( 1 , 3 , MD_PLN_FAST , 3 );//OE
- scu_pinmux( 1 , 6 , MD_PLN_FAST , 3 );//WE
-
- scu_pinmux( 1 , 4 , MD_PLN_FAST , 3 );//BLS0
- scu_pinmux( 6 , 6 , MD_PLN_FAST , 1 );//BLS1
- scu_pinmux( 13 , 13 , MD_PLN_FAST , 2 );//BLS2
- scu_pinmux( 13 , 10 , MD_PLN_FAST , 2 );//BLS3
-
- scu_pinmux( 1 , 5 , MD_PLN_FAST , 3 );//CS0
- scu_pinmux( 6 , 3 , MD_PLN_FAST , 3 );//CS1
- scu_pinmux( 13 , 12 , MD_PLN_FAST , 2 );//CS2
- scu_pinmux( 13 , 11 , MD_PLN_FAST , 2 );//CS3
-}
-
-
-static uint32_t nandReadId(void)
-{
- uint8_t a, b, c, d;
- volatile uint8_t *pCLE;
- volatile uint8_t *pALE;
- volatile uint8_t *pData;
-
- pCLE = K9F1G_CLE;
- pALE = K9F1G_ALE;
- pData = K9F1G_DATA;
-
- *pCLE = K9FXX_READ_ID;
- *pALE = 0;
-
- a = *pData;
- b = *pData;
- c = *pData;
- d = *pData;
-
-
- return (a << 24) | (b << 16) | (c << 8) | d;
-}
-
-static uint8_t nandStatus(void)
-{
- uint8_t status = 0;
- volatile uint8_t *pCLE;
- volatile uint8_t *pALE;
- volatile uint8_t *pData;
-
- pCLE = K9F1G_CLE;
- pALE = K9F1G_ALE;
- pData = K9F1G_DATA;
-
- *pCLE = K9FXX_READ_STATUS;
- *pALE = 0;
-
- status = *pData;
-
- /* remove bits not used */
- return (status & 0xC1);
-}
-
-static void nandWaitReady(void)
-{
- while( !(nandStatus() & (1<<6)) );
-}
-
-/******************************************************************************
- * Public Functions
- *****************************************************************************/
-
-
-
-/******************************************************************************
- *
- * Description:
- * Initialize the NAND Flash
- *
- * Returns:
- * TRUE if initialization successful; otherwise FALSE
- *
- *****************************************************************************/
-uint32_t nand_init (void)
-{
- uint32_t nandId = 0;
- TIM_TIMERCFG_Type timerCfg;
-
-// LPC_SC->PCONP |= 0x00000800;
- LPC_EMC->CONTROL = 0x00000001;
- LPC_EMC->CONFIG = 0x00000000;
-
- pinConfig();
-
- TIM_ConfigStructInit(TIM_TIMER_MODE, &timerCfg);
- TIM_Init(LPC_TIMER0, TIM_TIMER_MODE, &timerCfg);
-
- LPC_EMC->STATICCONFIG1 = 0x00000080;
-
- LPC_EMC->STATICWAITWEN1 = 0x00000002;
- LPC_EMC->STATICWAITOEN1 = 0x00000002;
- LPC_EMC->STATICWAITRD1 = 0x00000008;
- LPC_EMC->STATICWAITPAG1 = 0x0000001f;
- LPC_EMC->STATICWAITWR1 = 0x00000008;
- LPC_EMC->STATICWAITTURN1 = 0x0000000f;
-
- nandId = nandReadId();
-
- if ((nandId & 0xffff0000) !=
- (((uint32_t)(ID_MARKER_CODE) << 24) | ID_SAMSUNG << 16)) {
- /* unknown NAND chip */
- return FALSE;
- }
-
- pageSize = 1024 * (1 << (nandId & 0x03));
- blockSize = 64*1024 * (1 << ((nandId>>4) & 0x03));
- reduntSize = 8 * (1 << ((nandId >> 1) & 0x1));
-
-
- return TRUE;
-}
-
-/******************************************************************************
- *
- * Description:
- * Get the page size of the NAND flash
- *
- * Returns:
- * page size in bytes
- *
- *****************************************************************************/
-uint32_t nand_getPageSize(void)
-{
- return pageSize;
-}
-
-/******************************************************************************
- *
- * Description:
- * Get the block size of the NAND flash
- *
- * Returns:
- * block size in bytes
- *
- *****************************************************************************/
-uint32_t nand_getBlockSize(void)
-{
- return blockSize;
-}
-
-/******************************************************************************
- *
- * Description:
- * Get the redundant (spare) size per page
- *
- * Returns:
- * redundant/spare size in bytes
- *
- *****************************************************************************/
-uint32_t nand_getRedundantSize(void)
-{
- return reduntSize * (pageSize/512);
-}
-
-/******************************************************************************
- *
- * Description:
- * Check if a block is valid
- *
- * Returns:
- * TRUE if the block is valid; otherwise FALSE
- *
- *****************************************************************************/
-uint32_t nand_isBlockValid(uint32_t block)
-{
- uint32_t addr = 0;
- uint32_t page = 0;
-
- volatile uint8_t *pCLE;
- volatile uint8_t *pALE;
- volatile uint8_t *pData;
-
-
- pCLE = K9F1G_CLE;
- pALE = K9F1G_ALE;
- pData = K9F1G_DATA;
-
- if (block >= NAND_NUM_BLOCKS) {
- return FALSE;
- }
-
- addr = block * (blockSize/pageSize);
-
- /*
- * Check page 0 and page 1 in each block. If the first byte
- * in the spare area (of either page 0 or page 1) is != 0xFF
- * the block is invalid.
- */
-
- nandWaitReady();
-
- for (page = 0; page < 2; page++) {
- addr += page;
-
- *pCLE = K9FXX_READ_1;
- *pALE = (uint8_t) (pageSize & 0x00FF);
- *pALE = (uint8_t)((pageSize & 0xFF00) >> 8);
- *pALE = (uint8_t)((addr & 0x00FF));
- *pALE = (uint8_t)((addr & 0xFF00) >> 8);
- *pCLE = K9FXX_READ_2;
-
- WAIT_READY();
-
- if (*pData != 0xFF) {
- return FALSE;
- }
-
- }
-
- return TRUE;
-}
-
-
-/******************************************************************************
- *
- * Description:
- * Read a page from the NAND memory
- *
- * Params:
- * block - block number to read from
- * page - page with�n block to read from
- * pageBuf - data is copied to this buffer. The size must be at least
- * pageSize.
- *
- * Returns:
- * TRUE if read successful; otherwise FALSE
- *
- *****************************************************************************/
-uint32_t nand_readPage(uint32_t block, uint32_t page, uint8_t* pageBuf)
-{
- uint32_t i = 0;
- uint32_t addr = 0;
-
- volatile uint8_t *pCLE;
- volatile uint8_t *pALE;
- volatile uint8_t *pData;
-
-
- pCLE = K9F1G_CLE;
- pALE = K9F1G_ALE;
- pData = K9F1G_DATA;
-
- if (block >= NAND_NUM_BLOCKS) {
- return FALSE;
- }
-
- if (page >= blockSize/pageSize) {
- return FALSE;
- }
-
- addr = block * (blockSize/pageSize) + page;
-
- /*
- * Always reading from start of a page address.
- * This means that the column address is always 0.
- */
-
- *pCLE = K9FXX_READ_1;
- *pALE = 0;
- *pALE = 0;
- *pALE = (uint8_t)((addr & 0x00FF));
- *pALE = (uint8_t)((addr & 0xFF00) >> 8);
- *pCLE = K9FXX_READ_2;
-
- WAIT_READY();
-
-
- for (i = 0; i < pageSize; i++) {
- *pageBuf++ = *pData;
- }
-
-
- return TRUE;
-}
-
-/******************************************************************************
- *
- * Description:
- * Write a page of data to the NAND memory
- *
- * Params:
- * block - block number to write to
- * page - page within block to write to
- * pageBuf - data is copied from this buffer. The size must be at least
- * pageSize.
- *
- * Returns:
- * TRUE if write successful; otherwise FALSE
- *
- *****************************************************************************/
-uint32_t nand_writePage(uint32_t block, uint32_t page, uint8_t* pageBuf)
-{
- uint32_t i = 0;
- uint32_t addr = 0;
-
- volatile uint8_t *pCLE;
- volatile uint8_t *pALE;
- volatile uint8_t *pData;
-
-
- pCLE = K9F1G_CLE;
- pALE = K9F1G_ALE;
- pData = K9F1G_DATA;
-
- if (block >= NAND_NUM_BLOCKS) {
- return FALSE;
- }
-
- if (page >= blockSize/pageSize) {
- return FALSE;
- }
-
- addr = block * (blockSize/pageSize) + page;
-
- /*
- * Always writing to start of a page address.
- * This means that the column address is always 0.
- */
-
- *pCLE = K9FXX_BLOCK_PROGRAM_1;
- *pALE = 0;
- *pALE = 0;
- *pALE = (uint8_t)((addr & 0x00FF));
- *pALE = (uint8_t)((addr & 0xFF00) >> 8);
-
-
- for (i = 0; i < pageSize; i++) {
- *pData = *pageBuf++;
- }
-
- *pCLE = K9FXX_BLOCK_PROGRAM_2;
-
- TIM_Waitus(700);
- nandWaitReady();
-
- return ((nandStatus() & 0x01) != 0x01);
-}
-
-/******************************************************************************
- *
- * Description:
- * Erase a block
- *
- * Params:
- * block - block number to erase
- *
- * Returns:
- * TRUE if eras successful; otherwise FALSE
- *
- *****************************************************************************/
-uint32_t nand_eraseBlock(uint32_t block)
-{
- uint32_t addr = 0;
-
- volatile uint8_t *pCLE;
- volatile uint8_t *pALE;
-
- pCLE = K9F1G_CLE;
- pALE = K9F1G_ALE;
-
- if (block >= NAND_NUM_BLOCKS) {
- return FALSE;
- }
-
- addr = block * (blockSize/pageSize);
-
- *pCLE = K9FXX_BLOCK_ERASE_1;
- *pALE = (uint8_t)(addr & 0x00FF);
- *pALE = (uint8_t)((addr & 0xFF00) >> 8);
- *pCLE = K9FXX_BLOCK_ERASE_2;
-
- TIM_Waitus(700);
- nandWaitReady();
-
- return ((nandStatus() & 0x01) != 0x01);
-}
-
-#endif
diff --git a/demos/bsp/boards/embedded_artists/ea4357/nand.h b/demos/bsp/boards/embedded_artists/ea4357/nand.h deleted file mode 100644 index cb9acf2b9..000000000 --- a/demos/bsp/boards/embedded_artists/ea4357/nand.h +++ /dev/null @@ -1,36 +0,0 @@ -/*****************************************************************************
- *
- * Copyright(C) 2011, Embedded Artists AB
- * All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-#ifndef __NAND_H
-#define __NAND_H
-
-#define NAND_NUM_BLOCKS (1024)
-
-extern uint32_t nand_init (void);
-extern uint32_t nand_getPageSize(void);
-extern uint32_t nand_getBlockSize(void);
-extern uint32_t nand_getRedundantSize(void);
-extern uint32_t nand_isBlockValid(uint32_t blockNum);
-uint32_t nand_readPage(uint32_t block, uint32_t page, uint8_t* pageBuf);
-uint32_t nand_writePage(uint32_t block, uint32_t page, uint8_t* pageBuf);
-uint32_t nand_eraseBlock(uint32_t block);
-
-
-#endif /* end __NAND_H */
-/****************************************************************************
-** End Of File
-*****************************************************************************/
diff --git a/demos/bsp/boards/embedded_artists/ea4357/sdram.c b/demos/bsp/boards/embedded_artists/ea4357/sdram.c deleted file mode 100644 index 92d8cd138..000000000 --- a/demos/bsp/boards/embedded_artists/ea4357/sdram.c +++ /dev/null @@ -1,272 +0,0 @@ -/*****************************************************************************
- *
- * Copyright(C) 2011, Embedded Artists AB
- * All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-
-
-
-/******************************************************************************
- * Includes
- *****************************************************************************/
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include "lpc43xx.h"
-#include "lpc_types.h"
-#include "lpc43xx_scu.h"
-#include "lpc43xx_timer.h"
-#include "lpc43xx_cgu.h"
-#include "sdram.h"
-#include <string.h>
-
-/******************************************************************************
- * Defines and typedefs
- *****************************************************************************/
-
-/* SDRAM refresh time to 16 clock num */
-#define EMC_SDRAM_REFRESH(freq,time) \
- (((uint64_t)((uint64_t)time * freq)/16000000000ull)+1)
-
-/******************************************************************************
- * External global variables
- *****************************************************************************/
-
-/******************************************************************************
- * Local variables
- *****************************************************************************/
-
-/******************************************************************************
- * Local Functions
- *****************************************************************************/
-
-
-/*-------------------------PRIVATE FUNCTIONS------------------------------*/
-/*********************************************************************
- * @brief Calculate EMC Clock from nano second
- * @param[in] freq - frequency of EMC Clk
- * @param[in] time - nano second
- * @return None
- **********************************************************************/
-uint32_t NS2CLK(uint32_t freq, uint32_t time){
- return (((uint64_t)time*freq/1000000000));
-}
-
-static void pinConfig(void)
-{
- /* Set up EMC pin */
- scu_pinmux( 2 , 9 , MD_PLN_FAST , 3 );//A0
- scu_pinmux( 2 , 10 , MD_PLN_FAST , 3 );//A1
- scu_pinmux( 2 , 11 , MD_PLN_FAST , 3 );//A2
- scu_pinmux( 2 , 12 , MD_PLN_FAST , 3 );//A3
- scu_pinmux( 2 , 13 , MD_PLN_FAST , 3 );//A4
- scu_pinmux( 1 , 0 , MD_PLN_FAST , 2 );//A5
- scu_pinmux( 1 , 1 , MD_PLN_FAST , 2 );//A6
- scu_pinmux( 1 , 2 , MD_PLN_FAST , 2 );//A7
- scu_pinmux( 2 , 8 , MD_PLN_FAST , 3 );//A8
- scu_pinmux( 2 , 7 , MD_PLN_FAST , 3 );//A9
- scu_pinmux( 2 , 6 , MD_PLN_FAST , 2 );//A10
- scu_pinmux( 2 , 2 , MD_PLN_FAST , 2 );//A11
- scu_pinmux( 2 , 1 , MD_PLN_FAST , 2 );//A12
- scu_pinmux( 2 , 0 , MD_PLN_FAST , 2 );//A13
- scu_pinmux( 6 , 8 , MD_PLN_FAST , 1 );//A14
- scu_pinmux( 6 , 7 , MD_PLN_FAST , 1 );//A15
- scu_pinmux( 13 , 16 , MD_PLN_FAST , 2 );//A16
- scu_pinmux( 13 , 15 , MD_PLN_FAST , 2 );//A17
- scu_pinmux( 14 , 0 , MD_PLN_FAST , 3 );//A18
- scu_pinmux( 14 , 1 , MD_PLN_FAST , 3 );//A19
- scu_pinmux( 14 , 2 , MD_PLN_FAST , 3 );//A20
- scu_pinmux( 14 , 3 , MD_PLN_FAST , 3 );//A21
- scu_pinmux( 14 , 4 , MD_PLN_FAST , 3 );//A22
- scu_pinmux( 10 , 4 , MD_PLN_FAST , 3 );//A23
-
- scu_pinmux( 1 , 7 , MD_PLN_FAST , 3 );//D0
- scu_pinmux( 1 , 8 , MD_PLN_FAST , 3 );//D1
- scu_pinmux( 1 , 9 , MD_PLN_FAST , 3 );//D2
- scu_pinmux( 1 , 10 , MD_PLN_FAST , 3 );//D3
- scu_pinmux( 1 , 11 , MD_PLN_FAST , 3 );//D4
- scu_pinmux( 1 , 12 , MD_PLN_FAST , 3 );//D5
- scu_pinmux( 1 , 13 , MD_PLN_FAST , 3 );//D6
- scu_pinmux( 1 , 14 , MD_PLN_FAST , 3 );//D7
- scu_pinmux( 5 , 4 , MD_PLN_FAST , 2 );//D8
- scu_pinmux( 5 , 5 , MD_PLN_FAST , 2 );//D9
- scu_pinmux( 5 , 6 , MD_PLN_FAST , 2 );//D10
- scu_pinmux( 5 , 7 , MD_PLN_FAST , 2 );//D11
- scu_pinmux( 5 , 0 , MD_PLN_FAST , 2 );//D12
- scu_pinmux( 5 , 1 , MD_PLN_FAST , 2 );//D13
- scu_pinmux( 5 , 2 , MD_PLN_FAST , 2 );//D14
- scu_pinmux( 5 , 3 , MD_PLN_FAST , 2 );//D15
- scu_pinmux( 13 , 2 , MD_PLN_FAST , 2 );//D16
- scu_pinmux( 13 , 3 , MD_PLN_FAST , 2 );//D17
- scu_pinmux( 13 , 4 , MD_PLN_FAST , 2 );//D18
- scu_pinmux( 13 , 5 , MD_PLN_FAST , 2 );//D19
- scu_pinmux( 13 , 6 , MD_PLN_FAST , 2 );//D20
- scu_pinmux( 13 , 7 , MD_PLN_FAST , 2 );//D21
- scu_pinmux( 13 , 8 , MD_PLN_FAST , 2 );//D22
- scu_pinmux( 13 , 9 , MD_PLN_FAST , 2 );//D23
- scu_pinmux( 14 , 5 , MD_PLN_FAST , 3 );//D24
- scu_pinmux( 14 , 6 , MD_PLN_FAST , 3 );//D25
- scu_pinmux( 14 , 7 , MD_PLN_FAST , 3 );//D26
- scu_pinmux( 14 , 8 , MD_PLN_FAST , 3 );//D27
- scu_pinmux( 14 , 9 , MD_PLN_FAST , 3 );//D28
- scu_pinmux( 14 , 10 , MD_PLN_FAST , 3 );//D29
- scu_pinmux( 14 , 11 , MD_PLN_FAST , 3 );//D30
- scu_pinmux( 14 , 12 , MD_PLN_FAST , 3 );//D31
-
- scu_pinmux( 1 , 3 , MD_PLN_FAST , 3 );//OE
- scu_pinmux( 1 , 6 , MD_PLN_FAST , 3 );//WE
-
- scu_pinmux( 1 , 4 , MD_PLN_FAST , 3 );//BLS0
- scu_pinmux( 6 , 6 , MD_PLN_FAST , 1 );//BLS1
- scu_pinmux( 13 , 13 , MD_PLN_FAST , 2 );//BLS2
- scu_pinmux( 13 , 10 , MD_PLN_FAST , 2 );//BLS3
-
- scu_pinmux( 1 , 5 , MD_PLN_FAST , 3 );//CS0
- scu_pinmux( 6 , 3 , MD_PLN_FAST , 3 );//CS1
- scu_pinmux( 13 , 12 , MD_PLN_FAST , 2 );//CS2
- scu_pinmux( 13 , 11 , MD_PLN_FAST , 2 );//CS3
-
- scu_pinmux( 6 , 4 , MD_PLN_FAST , 3 );//CAS
- scu_pinmux( 6 , 5 , MD_PLN_FAST , 3 );//RAS
-
- scu_pinmux( 6 , 9 , MD_PLN_FAST , 3 );//DYCS0
- scu_pinmux( 6 , 1 , MD_PLN_FAST , 1 );//DYCS1
- scu_pinmux( 13 , 14 , MD_PLN_FAST , 2 );//DYCS2
- scu_pinmux( 15 , 14 , MD_PLN_FAST , 3 );//DYCS3
-
- scu_pinmux( 6 , 11 , MD_PLN_FAST , 3 );//CKEOUT0
- scu_pinmux( 6 , 2 , MD_PLN_FAST , 1 );//CKEOUT1
- scu_pinmux( 13 , 1 , MD_PLN_FAST , 2 );//CKEOUT2
- scu_pinmux( 14 , 15 , MD_PLN_FAST , 3 );//CKEOUT3
-
- scu_pinmux( 6 , 12 , MD_PLN_FAST , 3 );//DQMOUT0
- scu_pinmux( 6 , 10 , MD_PLN_FAST , 3 );//DQMOUT1
- scu_pinmux( 13 , 0 , MD_PLN_FAST , 2 );//DQMOUT2
- scu_pinmux( 14 , 13 , MD_PLN_FAST , 3 );//DQMOUT3
-}
-
-
-
-/******************************************************************************
- * Public Functions
- *****************************************************************************/
-
-
-/******************************************************************************
- *
- * Description:
- * Initialize the SDRAM
- *
- *****************************************************************************/
-uint32_t sdram_init (void)
-{
- uint32_t pclk, temp;
- uint64_t tmpclk;
-
- pinConfig(); //Full 32-bit Data bus, 24-bit Address
-
- /* Select EMC clock-out */
- LPC_SCU->SFSCLK_0 = MD_PLN_FAST;
- LPC_SCU->SFSCLK_1 = MD_PLN_FAST;
- LPC_SCU->SFSCLK_2 = MD_PLN_FAST;
- LPC_SCU->SFSCLK_3 = MD_PLN_FAST;
-
- LPC_EMC->CONTROL = 0x00000001;
- LPC_EMC->CONFIG = 0x00000000;
- LPC_EMC->DYNAMICCONFIG0 = 1<<14 | 0<<12 | 2<<9 | 1<<7; /* 256Mb, 8Mx32, 4 banks, row=12, column=9 */
-
- pclk = CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE);
-
- LPC_EMC->DYNAMICRASCAS0 = 0x00000202; /* 2 RAS, 2 CAS latency */
- LPC_EMC->DYNAMICREADCONFIG = 0x00000001; /* Command delayed strategy, using EMCCLKDELAY */
-
- LPC_EMC->DYNAMICRP = NS2CLK(pclk, 20);
- LPC_EMC->DYNAMICRAS = NS2CLK(pclk, 42);
- LPC_EMC->DYNAMICSREX = NS2CLK(pclk, 63);
- LPC_EMC->DYNAMICAPR = 0x00000005;
- LPC_EMC->DYNAMICDAL = 0x00000005;
- LPC_EMC->DYNAMICWR = 2;
- LPC_EMC->DYNAMICRC = NS2CLK(pclk, 63);
- LPC_EMC->DYNAMICRFC = NS2CLK(pclk, 63);
- LPC_EMC->DYNAMICXSR = NS2CLK(pclk, 63);
- LPC_EMC->DYNAMICRRD = NS2CLK(pclk, 14);
- LPC_EMC->DYNAMICMRD = 0x00000002;
-
- TIM_Waitus(100); /* wait 100ms */
- LPC_EMC->DYNAMICCONTROL = 0x00000183; /* Issue NOP command */
-
- TIM_Waitus(200); /* wait 200ms */
- LPC_EMC->DYNAMICCONTROL = 0x00000103; /* Issue PALL command */
-
- LPC_EMC->DYNAMICREFRESH = EMC_SDRAM_REFRESH(pclk,70); /* ( n * 16 ) -> 32 clock cycles */
-
- //for(i = 0; i < 0x80; i++); /* wait 128 AHB clock cycles */
- TIM_Waitus(200); /* wait 200ms */
-
- tmpclk = (uint64_t)15625*(uint64_t)pclk/1000000000/16;
- LPC_EMC->DYNAMICREFRESH = tmpclk; /* ( n * 16 ) -> 736 clock cycles -> 15.330uS at 48MHz <= 15.625uS ( 64ms / 4096 row ) */
-
- LPC_EMC->DYNAMICCONTROL = 0x00000083; /* Issue MODE command */
-
- //Timing for 48/60/72MHZ Bus
- temp = *((volatile uint32_t *)(SDRAM_BASE | (2<<4| 2)<<(9+2+2))); /* 4 burst, 2 CAS latency */
- temp = temp;
- LPC_EMC->DYNAMICCONTROL = 0x00000000; /* Issue NORMAL command */
-
- //[re]enable buffers
- LPC_EMC->DYNAMICCONFIG0 |= 1<<19;
-
- return TRUE;
-}
-
-uint32_t sdram_test( void )
-{
- volatile uint32_t *wr_ptr;
- volatile uint16_t *short_wr_ptr;
- uint32_t data;
- uint32_t i, j;
-
- wr_ptr = (uint32_t *)SDRAM_BASE;
- short_wr_ptr = (uint16_t *)wr_ptr;
-
- /* 16 bit write */
- for (i = 0; i < SDRAM_SIZE/0x40000; i++)
- {
- for (j = 0; j < 0x100; j++)
- {
- *short_wr_ptr++ = (i + j) & 0xFFFF;
- *short_wr_ptr++ = ((i + j) + 1) & 0xFFFF;
- }
- }
-
- /* Verifying */
- wr_ptr = (uint32_t *)SDRAM_BASE;
- for (i = 0; i < SDRAM_SIZE/0x40000; i++)
- {
- for (j = 0; j < 0x100; j++)
- {
- data = *wr_ptr;
- if (data != (((((i + j) + 1) & 0xFFFF) << 16) | ((i + j) & 0xFFFF)))
- {
- return 0x0;
- }
- wr_ptr++;
- }
- }
- return 0x1;
-}
-
-#endif
diff --git a/demos/bsp/boards/embedded_artists/ea4357/sdram.h b/demos/bsp/boards/embedded_artists/ea4357/sdram.h deleted file mode 100644 index 1ee6f5626..000000000 --- a/demos/bsp/boards/embedded_artists/ea4357/sdram.h +++ /dev/null @@ -1,31 +0,0 @@ -/*****************************************************************************
- *
- * Copyright(C) 2011, Embedded Artists AB
- * All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-#ifndef __SDRAM_H
-#define __SDRAM_H
-
-#define SDRAM_SIZE 0x2000000 /* 256Mbit = 32MB */
-
-#define SDRAM_BASE 0x28000000 /*CS0*/
-
-extern uint32_t sdram_init(void);
-extern uint32_t sdram_test(void);
-
-#endif /* end __SDRAM_H */
-/****************************************************************************
-** End Of File
-*****************************************************************************/
diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/acc.c b/demos/bsp/boards/embedded_artists/oem_base_board/acc.c deleted file mode 100644 index bd6a82042..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/acc.c +++ /dev/null @@ -1,251 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ - - - -/****************************************************************************** - * Includes - *****************************************************************************/ - - -#include "lpc_types.h" -#include "lpc43xx_i2c.h" -#include "acc.h" - -/****************************************************************************** - * Defines and typedefs - *****************************************************************************/ -#define I2C_PORT (LPC_I2C0) - -#define ACC_I2C_ADDR (0x1D) - -#define ACC_ADDR_XOUTL 0x00 -#define ACC_ADDR_XOUTH 0x01 -#define ACC_ADDR_YOUTL 0x02 -#define ACC_ADDR_YOUTX 0x03 -#define ACC_ADDR_ZOUTL 0x04 -#define ACC_ADDR_ZOUTH 0x05 -#define ACC_ADDR_XOUT8 0x06 -#define ACC_ADDR_YOUT8 0x07 -#define ACC_ADDR_ZOUT8 0x08 -#define ACC_ADDR_STATUS 0x09 -#define ACC_ADDR_DETSRC 0x0A -#define ACC_ADDR_TOUT 0x0B -#define ACC_ADDR_I2CAD 0x0D -#define ACC_ADDR_USRINF 0x0E -#define ACC_ADDR_WHOAMI 0x0F -#define ACC_ADDR_XOFFL 0x10 -#define ACC_ADDR_XOFFH 0x11 -#define ACC_ADDR_YOFFL 0x12 -#define ACC_ADDR_YOFFH 0x13 -#define ACC_ADDR_ZOFFL 0x14 -#define ACC_ADDR_ZOFFH 0x15 -#define ACC_ADDR_MCTL 0x16 -#define ACC_ADDR_INTRST 0x17 -#define ACC_ADDR_CTL1 0x18 -#define ACC_ADDR_CTL2 0x19 -#define ACC_ADDR_LDTH 0x1A -#define ACC_ADDR_PDTH 0x1B -#define ACC_ADDR_PW 0x1C -#define ACC_ADDR_LT 0x1D -#define ACC_ADDR_TW 0x1E - -#define ACC_MCTL_MODE(m) ((m) << 0) -#define ACC_MCTL_GLVL(g) ((g) << 2) - - -#define ACC_STATUS_DRDY 0x01 -#define ACC_STATUS_DOVR 0x02 -#define ACC_STATUS_PERR 0x04 - - -/****************************************************************************** - * External global variables - *****************************************************************************/ - -/****************************************************************************** - * Local variables - *****************************************************************************/ - -static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2C_M_SETUP_Type i2cData; - - i2cData.sl_addr7bit = addr; - i2cData.tx_data = buf; - i2cData.tx_length = len; - i2cData.rx_data = NULL; - i2cData.rx_length = 0; - i2cData.retransmissions_max = 3; - - return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING); -} - -static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2C_M_SETUP_Type i2cData; - - i2cData.sl_addr7bit = addr; - i2cData.tx_data = NULL; - i2cData.tx_length = 0; - i2cData.rx_data = buf; - i2cData.rx_length = len; - i2cData.retransmissions_max = 3; - - return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING); -} - - -static uint8_t getStatus(void) -{ - uint8_t buf[1]; - - buf[0] = ACC_ADDR_STATUS; - I2CWrite(ACC_I2C_ADDR, buf, 1); - I2CRead(ACC_I2C_ADDR, buf, 1); - - return buf[0]; -} - -static uint8_t getModeControl(void) -{ - uint8_t buf[1]; - - buf[0] = ACC_ADDR_MCTL; - I2CWrite(ACC_I2C_ADDR, buf, 1); - I2CRead(ACC_I2C_ADDR, buf, 1); - - return buf[0]; -} - -static void setModeControl(uint8_t mctl) -{ - uint8_t buf[2]; - - buf[0] = ACC_ADDR_MCTL; - buf[1] = mctl; - I2CWrite(ACC_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * Local Functions - *****************************************************************************/ - -/****************************************************************************** - * Public Functions - *****************************************************************************/ - -/****************************************************************************** - * - * Description: - * Initialize the ISL29003 Device - * - *****************************************************************************/ -void acc_init (void) -{ - - /* set to measurement mode by default */ - - setModeControl( (ACC_MCTL_MODE(ACC_MODE_MEASURE) - | ACC_MCTL_GLVL(ACC_RANGE_2G) )); - -} - -/****************************************************************************** - * - * Description: - * Read accelerometer data - * - * Params: - * [out] x - read x value - * [out] y - read y value - * [out] z - read z value - * - *****************************************************************************/ -void acc_read (int8_t *x, int8_t *y, int8_t *z) -{ - uint8_t buf[1]; - - /* wait for ready flag */ - while ((getStatus() & ACC_STATUS_DRDY) == 0); - - /* - * Have experienced problems reading all registers - * at once. Change to reading them one-by-one. - */ - buf[0] = ACC_ADDR_XOUT8; - I2CWrite(ACC_I2C_ADDR, buf, 1); - I2CRead(ACC_I2C_ADDR, buf, 1); - - *x = (int8_t)buf[0]; - - buf[0] = ACC_ADDR_YOUT8; - I2CWrite(ACC_I2C_ADDR, buf, 1); - I2CRead(ACC_I2C_ADDR, buf, 1); - - *y = (int8_t)buf[0]; - - buf[0] = ACC_ADDR_ZOUT8; - I2CWrite(ACC_I2C_ADDR, buf, 1); - I2CRead(ACC_I2C_ADDR, buf, 1); - - *z = (int8_t)buf[0]; -} - -/****************************************************************************** - * - * Description: - * Set the g-Range - * - * Params: - * [in] range - the g-Range - * - *****************************************************************************/ -void acc_setRange(acc_range_t range) -{ - uint8_t mctl = 0; - - mctl = getModeControl(); - - mctl &= ~(0x03 << 2); - mctl |= ACC_MCTL_GLVL(range); - - setModeControl(mctl); -} - -/****************************************************************************** - * - * Description: - * Set sensor mode - * - * Params: - * [in] mode - the mode to set - * - *****************************************************************************/ -void acc_setMode(acc_mode_t mode) -{ - uint8_t mctl = 0; - - mctl = getModeControl(); - - mctl &= ~(0x03 << 0); - mctl |= ACC_MCTL_MODE(mode); - - setModeControl(mctl); -} - diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/acc.h b/demos/bsp/boards/embedded_artists/oem_base_board/acc.h deleted file mode 100644 index 3a739e0b0..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/acc.h +++ /dev/null @@ -1,49 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __ACC_H -#define __ACC_H - - -typedef enum -{ - ACC_MODE_STANDBY, - ACC_MODE_MEASURE, - ACC_MODE_LEVEL, /* level detection */ - ACC_MODE_PULSE, /* pulse detection */ -} acc_mode_t; - -typedef enum -{ - ACC_RANGE_8G, - ACC_RANGE_2G, - ACC_RANGE_4G, -} acc_range_t; - - -void acc_init (void); - -void acc_read (int8_t *x, int8_t *y, int8_t *z); -void acc_setRange(acc_range_t range); -void acc_setMode(acc_mode_t mode); - - - -#endif /* end __LIGHT_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/base_eeprom.c b/demos/bsp/boards/embedded_artists/oem_base_board/base_eeprom.c deleted file mode 100644 index a11070d70..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/base_eeprom.c +++ /dev/null @@ -1,195 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ - -/* - * NOTE: I2C must have been initialized before calling any functions in this - * file. - */ - -/****************************************************************************** - * Includes - *****************************************************************************/ - -#include <string.h> -#include <stdio.h> -#include "lpc_types.h" -#include "lpc43xx_i2c.h" -#include "base_eeprom.h" - -/****************************************************************************** - * Defines and typedefs - *****************************************************************************/ - -#define I2C_PORT (LPC_I2C0) - -#ifndef MIN -#define MIN(x, y) ((x) < (y) ? (x) : (y)) -#endif - -#define EEPROM_I2C_ADDR (0x57) - -#define EEPROM_PAGE_SIZE 32 - - -/****************************************************************************** - * External global variables - *****************************************************************************/ - -/****************************************************************************** - * Local variables - *****************************************************************************/ - - -/****************************************************************************** - * Local Functions - *****************************************************************************/ - -static void eepromDelay(void) -{ - volatile int i = 0; - for (i = 0; i <0x20000; i++); -} - -static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2C_M_SETUP_Type i2cData; - - i2cData.sl_addr7bit = addr; - i2cData.tx_data = buf; - i2cData.tx_length = len; - i2cData.rx_data = NULL; - i2cData.rx_length = 0; - i2cData.retransmissions_max = 3; - - return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING); -} - -static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2C_M_SETUP_Type i2cData; - - i2cData.sl_addr7bit = addr; - i2cData.tx_data = NULL; - i2cData.tx_length = 0; - i2cData.rx_data = buf; - i2cData.rx_length = len; - i2cData.retransmissions_max = 3; - - return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING); -} - -/****************************************************************************** - * Public Functions - *****************************************************************************/ - -/****************************************************************************** - * - * Description: - * Initialize the EEPROM Driver - * - *****************************************************************************/ -void base_eeprom_init (void) -{ - I2C_Cmd(I2C_PORT, ENABLE); -} - -/****************************************************************************** - * - * Description: - * Read from the EEPROM - * - * Params: - * [in] buf - read buffer - * [in] offset - offset to start to read from - * [in] len - number of bytes to read - * - * Returns: - * number of read bytes or -1 in case of an error - * - *****************************************************************************/ -int16_t base_eeprom_read(uint8_t* buf, uint16_t offset, uint16_t len) -{ - uint8_t addr = 0; - int i = 0; - uint8_t off[2]; - - if (len > BASE_EEPROM_TOTAL_SIZE || offset+len > BASE_EEPROM_TOTAL_SIZE) { - return -1; - } - - addr = EEPROM_I2C_ADDR; - off[0] = ((offset >> 8) & 0xff); - off[1] = (offset & 0xff); - - I2CWrite((addr << 1), off, 2); - for ( i = 0; i < 0x2000; i++); - I2CRead((addr << 1), buf, len); - - return len; - -} - -/****************************************************************************** - * - * Description: - * Write to the EEPROM - * - * Params: - * [in] buf - data to write - * [in] offset - offset to start to write to - * [in] len - number of bytes to write - * - * Returns: - * number of written bytes or -1 in case of an error - * - *****************************************************************************/ -int16_t base_eeprom_write(uint8_t* buf, uint16_t offset, uint16_t len) -{ - uint8_t addr = 0; - int16_t written = 0; - uint16_t wLen = 0; - uint16_t off = offset; - uint8_t tmp[EEPROM_PAGE_SIZE+2]; - - if (len > BASE_EEPROM_TOTAL_SIZE || offset+len > BASE_EEPROM_TOTAL_SIZE) { - return -1; - } - - addr = EEPROM_I2C_ADDR; - - wLen = EEPROM_PAGE_SIZE - (off % EEPROM_PAGE_SIZE); - wLen = MIN(wLen, len); - - while (len) { - tmp[0] = ((off >> 8) & 0xff); - tmp[1] = (off & 0xff); - memcpy(&tmp[2], (void*)&buf[written], wLen); - I2CWrite((addr << 1), tmp, wLen+2); - - /* delay to wait for a write cycle */ - eepromDelay(); - - len -= wLen; - written += wLen; - off += wLen; - - wLen = MIN(EEPROM_PAGE_SIZE, len); - } - - return written; -} diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/base_eeprom.h b/demos/bsp/boards/embedded_artists/oem_base_board/base_eeprom.h deleted file mode 100644 index 0d7023093..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/base_eeprom.h +++ /dev/null @@ -1,31 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __BASE_EEPROM_H -#define __BASE_EEPROM_H - -#define BASE_EEPROM_TOTAL_SIZE 8192 - -void base_eeprom_init (void); -int16_t base_eeprom_read(uint8_t* buf, uint16_t offset, uint16_t len); -int16_t base_eeprom_write(uint8_t* buf, uint16_t offset, uint16_t len); - - -#endif /* end __BASE_EEPROM_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/joystick.c b/demos/bsp/boards/embedded_artists/oem_base_board/joystick.c deleted file mode 100644 index 49770c00c..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/joystick.c +++ /dev/null @@ -1,155 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ - - -/****************************************************************************** - * Includes - *****************************************************************************/ - - -#include "lpc_types.h" -#include "lpc43xx_gpio.h" -#include "lpc43xx_scu.h" -#include "joystick.h" - -/****************************************************************************** - * Defines and typedefs - *****************************************************************************/ - -#define GPIO_PIN_LEFT (1<<9) -#define GPIO_PIN_RIGHT (1<<12) -#define GPIO_PIN_UP (1<<10) -#define GPIO_PIN_DOWN (1<<13) -#define GPIO_PIN_CENTER (1<<8) - -#define GPIO_PORT 4 - - -/****************************************************************************** - * External global variables - *****************************************************************************/ -// TODO move later -/* Pin mode defines, more in line with the definitions in the LPC1800/4300 user manual */ -/* Defines for SFSPx_y pin configuration registers */ -#define PDN_ENABLE (1 << 3) // Pull-down enable -#define PDN_DISABLE (0 << 3) // Pull-down disable -#define PUP_ENABLE (0 << 4) // Pull-up enable -#define PUP_DISABLE (1 << 4) // Pull-up disable -#define SLEWRATE_SLOW (0 << 5) // Slew rate for low noise with medium speed -#define SLEWRATE_FAST (1 << 5) // Slew rate for medium noise with fast speed -#define INBUF_ENABLE (1 << 6) // Input buffer -#define INBUF_DISABLE (0 << 6) // Input buffer -#define FILTER_ENABLE (0 << 7) // Glitch filter (for signals below 30MHz) -#define FILTER_DISABLE (1 << 7) // No glitch filter (for signals above 30MHz) -#define DRIVE_8MA (1 << 8) // Drive strength of 8mA -#define DRIVE_14MA (1 << 9) // Drive strength of 14mA -#define DRIVE_20MA (3 << 8) // Drive strength of 20mA - - -/* Configuration examples for various I/O pins */ -#define EMC_IO (PUP_ENABLE | PDN_ENABLE | SLEWRATE_FAST | INBUF_ENABLE | FILTER_DISABLE) -#define LCD_PINCONFIG (PUP_DISABLE | PDN_DISABLE | SLEWRATE_FAST | INBUF_ENABLE | FILTER_DISABLE) -#define CLK_IN (PUP_ENABLE | PDN_ENABLE | SLEWRATE_FAST | INBUF_ENABLE | FILTER_DISABLE) -#define CLK_OUT (PUP_ENABLE | PDN_ENABLE | SLEWRATE_FAST | INBUF_ENABLE | FILTER_DISABLE) -#define GPIO_PUP (PUP_ENABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_ENABLE | FILTER_ENABLE ) -#define GPIO_PDN (PUP_DISABLE | PDN_ENABLE | SLEWRATE_SLOW | INBUF_ENABLE | FILTER_ENABLE ) -#define GPIO_NOPULL (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_ENABLE | FILTER_ENABLE ) -#define UART_RX_TX (PUP_DISABLE | PDN_ENABLE | SLEWRATE_SLOW | INBUF_ENABLE | FILTER_ENABLE ) -#define SSP_IO (PUP_ENABLE | PDN_ENABLE | SLEWRATE_FAST | INBUF_ENABLE | FILTER_DISABLE) -/****************************************************************************** - * Local variables - *****************************************************************************/ - - -/****************************************************************************** - * Local Functions - *****************************************************************************/ - - -/****************************************************************************** - * Public Functions - *****************************************************************************/ - -/****************************************************************************** - * - * Description: - * Initialize the Joystick Driver - * - *****************************************************************************/ -void joystick_init (void) -{ - /* set to GPIO function for the 5 pins used with the joystick */ - scu_pinmux( 0xa , 1 , GPIO_NOPULL , FUNC0 );//GPIO4[8] - scu_pinmux( 0xa , 2 , GPIO_NOPULL , FUNC0 );//GPIO4[9] - scu_pinmux( 0xa , 3 , GPIO_NOPULL , FUNC0 );//GPIO4[10] - scu_pinmux( 0x9 , 0 , GPIO_NOPULL , FUNC0 );//GPIO4[12] - scu_pinmux( 0x9 , 1 , GPIO_NOPULL , FUNC0 );//GPIO4[13] - - /* set the pins as inputs */ - GPIO_SetDir(GPIO_PORT, GPIO_PIN_LEFT, 0); - GPIO_SetDir(GPIO_PORT, GPIO_PIN_RIGHT, 0); - GPIO_SetDir(GPIO_PORT, GPIO_PIN_UP, 0); - GPIO_SetDir(GPIO_PORT, GPIO_PIN_DOWN, 0); - GPIO_SetDir(GPIO_PORT, GPIO_PIN_CENTER, 0); -} - -/****************************************************************************** - * - * Description: - * Read the joystick status - * - * Returns: - * The joystick status. The returned value is a bit mask. More than one - * direction may be active at any given time (e.g. UP and RIGHT) - * - *****************************************************************************/ -uint8_t joystick_read(void) -{ - uint8_t status = 0; - uint32_t pinVal = 0; - - pinVal = GPIO_ReadValue(GPIO_PORT); - pinVal = pinVal; - - if ((pinVal & GPIO_PIN_DOWN) == 0) { - status |= JOYSTICK_DOWN; - } - - if ((pinVal & GPIO_PIN_RIGHT) == 0) { - status |= JOYSTICK_RIGHT; - } - - if ((pinVal & GPIO_PIN_UP) == 0) { - status |= JOYSTICK_UP; - } - - if ((pinVal & GPIO_PIN_LEFT) == 0) { - status |= JOYSTICK_LEFT; - } - - if ((pinVal & GPIO_PIN_CENTER) == 0) { - status |= JOYSTICK_CENTER; - } - - return status; -} - - - - - diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/joystick.h b/demos/bsp/boards/embedded_artists/oem_base_board/joystick.h deleted file mode 100644 index 5c466497a..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/joystick.h +++ /dev/null @@ -1,37 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __JOYSTICK_H -#define __JOYSTICK_H - - -#define JOYSTICK_CENTER 0x01 -#define JOYSTICK_UP 0x02 -#define JOYSTICK_DOWN 0x04 -#define JOYSTICK_LEFT 0x08 -#define JOYSTICK_RIGHT 0x10 - - -void joystick_init (void); -uint8_t joystick_read(void); - - - -#endif /* end __JOYSTICK_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/lm75a.c b/demos/bsp/boards/embedded_artists/oem_base_board/lm75a.c deleted file mode 100644 index 5c8b90171..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/lm75a.c +++ /dev/null @@ -1,128 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ - -/* - * NOTE: I2C must have been initialized before calling any functions in this - * file. - */ - -/****************************************************************************** - * Includes - *****************************************************************************/ - -#include <string.h> -#include <stdio.h> -#include "lpc_types.h" -#include "lpc43xx_i2c.h" - - -/****************************************************************************** - * Defines and typedefs - *****************************************************************************/ - -#define I2C_PORT (LPC_I2C0) - -#define LM75A_I2C_ADDR (0x48) - -#define LM75A_CMD_TEMP 0x00 - -#define I2CDEV LPC_I2C2 - - -/****************************************************************************** - * External global variables - *****************************************************************************/ - -/****************************************************************************** - * Local variables - *****************************************************************************/ - - -/****************************************************************************** - * Local Functions - *****************************************************************************/ -static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2C_M_SETUP_Type i2cData; - - i2cData.sl_addr7bit = addr; - i2cData.tx_data = buf; - i2cData.tx_length = len; - i2cData.rx_data = NULL; - i2cData.rx_length = 0; - i2cData.retransmissions_max = 3; - - return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING); -} - -static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2C_M_SETUP_Type i2cData; - - i2cData.sl_addr7bit = addr; - i2cData.tx_data = NULL; - i2cData.tx_length = 0; - i2cData.rx_data = buf; - i2cData.rx_length = len; - i2cData.retransmissions_max = 3; - - return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING); -} - -/****************************************************************************** - * Public Functions - *****************************************************************************/ - -/****************************************************************************** - * - * Description: - * Initialize the EEPROM Driver - * - *****************************************************************************/ -void lm75a_init (void) -{ - -} - -/****************************************************************************** - * - * Description: - * Read the temperature - * - * Params: None - * - * Returns: - * The measured temperature x 100, i.e. 26.50 degrees returned as 2650 - * - *****************************************************************************/ -int32_t lm75a_readTemp(void) -{ - uint8_t temp[2]; - int16_t t = 0; - - I2CWrite(LM75A_I2C_ADDR, LM75A_CMD_TEMP, 1); - I2CRead(LM75A_I2C_ADDR, temp, 2); - - /* 11 MSB bits used. Celcius is calculated as Temp data * 1/8 */ - t = ((temp[0] << 8) | (temp[1])); - - return ((t * 100) >> 8); - -} - - diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/lm75a.h b/demos/bsp/boards/embedded_artists/oem_base_board/lm75a.h deleted file mode 100644 index 0ed6c8dfe..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/lm75a.h +++ /dev/null @@ -1,29 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __LM75A_H -#define __LM75A_H - - -void lm75a_init (void); -int32_t lm75a_readTemp(void); - - -#endif /* end __LM75A_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/memreg.c b/demos/bsp/boards/embedded_artists/oem_base_board/memreg.c deleted file mode 100644 index ef4338bc3..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/memreg.c +++ /dev/null @@ -1,170 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ - - - -/****************************************************************************** - * Includes - *****************************************************************************/ - -#include "lpc43xx.h" -#include "lpc_types.h" -#include "lpc43xx_scu.h" -#include "memreg.h" - - -/****************************************************************************** - * Defines and typedefs - *****************************************************************************/ - - -/****************************************************************************** - * External global variables - *****************************************************************************/ - -/****************************************************************************** - * Local variables - *****************************************************************************/ - -static void pinConfig(void) -{ - /* Set up EMC pin */ - scu_pinmux( 2 , 9 , MD_PLN_FAST , 3 );//A0 - scu_pinmux( 2 , 10 , MD_PLN_FAST , 3 );//A1 - scu_pinmux( 2 , 11 , MD_PLN_FAST , 3 );//A2 - scu_pinmux( 2 , 12 , MD_PLN_FAST , 3 );//A3 - scu_pinmux( 2 , 13 , MD_PLN_FAST , 3 );//A4 - scu_pinmux( 1 , 0 , MD_PLN_FAST , 2 );//A5 - scu_pinmux( 1 , 1 , MD_PLN_FAST , 2 );//A6 - scu_pinmux( 1 , 2 , MD_PLN_FAST , 2 );//A7 - scu_pinmux( 2 , 8 , MD_PLN_FAST , 3 );//A8 - scu_pinmux( 2 , 7 , MD_PLN_FAST , 3 );//A9 - scu_pinmux( 2 , 6 , MD_PLN_FAST , 2 );//A10 - scu_pinmux( 2 , 2 , MD_PLN_FAST , 2 );//A11 - scu_pinmux( 2 , 1 , MD_PLN_FAST , 2 );//A12 - scu_pinmux( 2 , 0 , MD_PLN_FAST , 2 );//A13 - scu_pinmux( 6 , 8 , MD_PLN_FAST , 1 );//A14 - scu_pinmux( 6 , 7 , MD_PLN_FAST , 1 );//A15 - scu_pinmux( 13 , 16 , MD_PLN_FAST , 2 );//A16 - scu_pinmux( 13 , 15 , MD_PLN_FAST , 2 );//A17 - scu_pinmux( 14 , 0 , MD_PLN_FAST , 3 );//A18 - scu_pinmux( 14 , 1 , MD_PLN_FAST , 3 );//A19 - scu_pinmux( 14 , 2 , MD_PLN_FAST , 3 );//A20 - scu_pinmux( 14 , 3 , MD_PLN_FAST , 3 );//A21 - scu_pinmux( 14 , 4 , MD_PLN_FAST , 3 );//A22 - scu_pinmux( 10 , 4 , MD_PLN_FAST , 3 );//A23 - - scu_pinmux( 1 , 7 , MD_PLN_FAST , 3 );//D0 - scu_pinmux( 1 , 8 , MD_PLN_FAST , 3 );//D1 - scu_pinmux( 1 , 9 , MD_PLN_FAST , 3 );//D2 - scu_pinmux( 1 , 10 , MD_PLN_FAST , 3 );//D3 - scu_pinmux( 1 , 11 , MD_PLN_FAST , 3 );//D4 - scu_pinmux( 1 , 12 , MD_PLN_FAST , 3 );//D5 - scu_pinmux( 1 , 13 , MD_PLN_FAST , 3 );//D6 - scu_pinmux( 1 , 14 , MD_PLN_FAST , 3 );//D7 - scu_pinmux( 5 , 4 , MD_PLN_FAST , 2 );//D8 - scu_pinmux( 5 , 5 , MD_PLN_FAST , 2 );//D9 - scu_pinmux( 5 , 6 , MD_PLN_FAST , 2 );//D10 - scu_pinmux( 5 , 7 , MD_PLN_FAST , 2 );//D11 - scu_pinmux( 5 , 0 , MD_PLN_FAST , 2 );//D12 - scu_pinmux( 5 , 1 , MD_PLN_FAST , 2 );//D13 - scu_pinmux( 5 , 2 , MD_PLN_FAST , 2 );//D14 - scu_pinmux( 5 , 3 , MD_PLN_FAST , 2 );//D15 - scu_pinmux( 13 , 2 , MD_PLN_FAST , 2 );//D16 - scu_pinmux( 13 , 3 , MD_PLN_FAST , 2 );//D17 - scu_pinmux( 13 , 4 , MD_PLN_FAST , 2 );//D18 - scu_pinmux( 13 , 5 , MD_PLN_FAST , 2 );//D19 - scu_pinmux( 13 , 6 , MD_PLN_FAST , 2 );//D20 - scu_pinmux( 13 , 7 , MD_PLN_FAST , 2 );//D21 - scu_pinmux( 13 , 8 , MD_PLN_FAST , 2 );//D22 - scu_pinmux( 13 , 9 , MD_PLN_FAST , 2 );//D23 - scu_pinmux( 14 , 5 , MD_PLN_FAST , 3 );//D24 - scu_pinmux( 14 , 6 , MD_PLN_FAST , 3 );//D25 - scu_pinmux( 14 , 7 , MD_PLN_FAST , 3 );//D26 - scu_pinmux( 14 , 8 , MD_PLN_FAST , 3 );//D27 - scu_pinmux( 14 , 9 , MD_PLN_FAST , 3 );//D28 - scu_pinmux( 14 , 10 , MD_PLN_FAST , 3 );//D29 - scu_pinmux( 14 , 11 , MD_PLN_FAST , 3 );//D30 - scu_pinmux( 14 , 12 , MD_PLN_FAST , 3 );//D31 - - scu_pinmux( 1 , 3 , MD_PLN_FAST , 3 );//OE - scu_pinmux( 1 , 6 , MD_PLN_FAST , 3 );//WE - - scu_pinmux( 1 , 4 , MD_PLN_FAST , 3 );//BLS0 - scu_pinmux( 6 , 6 , MD_PLN_FAST , 1 );//BLS1 - scu_pinmux( 13 , 13 , MD_PLN_FAST , 2 );//BLS2 - scu_pinmux( 13 , 10 , MD_PLN_FAST , 2 );//BLS3 - - scu_pinmux( 1 , 5 , MD_PLN_FAST , 3 );//CS0 - scu_pinmux( 6 , 3 , MD_PLN_FAST , 3 );//CS1 - scu_pinmux( 13 , 12 , MD_PLN_FAST , 2 );//CS2 - scu_pinmux( 13 , 11 , MD_PLN_FAST , 2 );//CS3 - - scu_pinmux( 6 , 4 , MD_PLN_FAST , 3 );//CAS - scu_pinmux( 6 , 5 , MD_PLN_FAST , 3 );//RAS - - scu_pinmux( 6 , 9 , MD_PLN_FAST , 3 );//DYCS0 - scu_pinmux( 6 , 1 , MD_PLN_FAST , 1 );//DYCS1 - scu_pinmux( 13 , 14 , MD_PLN_FAST , 2 );//DYCS2 - scu_pinmux( 15 , 14 , MD_PLN_FAST , 3 );//DYCS3 - - scu_pinmux( 6 , 11 , MD_PLN_FAST , 3 );//CKEOUT0 - scu_pinmux( 6 , 2 , MD_PLN_FAST , 1 );//CKEOUT1 - scu_pinmux( 13 , 1 , MD_PLN_FAST , 2 );//CKEOUT2 - scu_pinmux( 14 , 15 , MD_PLN_FAST , 3 );//CKEOUT3 - - scu_pinmux( 6 , 12 , MD_PLN_FAST , 3 );//DQMOUT0 - scu_pinmux( 6 , 10 , MD_PLN_FAST , 3 );//DQMOUT1 - scu_pinmux( 13 , 0 , MD_PLN_FAST , 2 );//DQMOUT2 - scu_pinmux( 14 , 13 , MD_PLN_FAST , 3 );//DQMOUT3 -} - - - -/****************************************************************************** - * Local Functions - *****************************************************************************/ - - - -/****************************************************************************** - * Public Functions - *****************************************************************************/ - - - -/****************************************************************************** - * - * Description: - * Initialize the NOR Flash - * - *****************************************************************************/ -uint32_t memreg_init (void) -{ - LPC_EMC->CONTROL = 0x00000001; - LPC_EMC->CONFIG = 0x00000000; - - pinConfig(); - - // Setup for 16-bit access - LPC_EMC->STATICCONFIG2 = 0x00000001; - - return FALSE; -} - - diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/memreg.h b/demos/bsp/boards/embedded_artists/oem_base_board/memreg.h deleted file mode 100644 index e9ef85f03..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/memreg.h +++ /dev/null @@ -1,30 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __MEMREG_H -#define __MEMREG_H - -#define MEMREG_BASE 0x1e000000 - - -extern uint32_t memreg_init (void); - - -#endif /* end __MEMREG_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/norflash.c b/demos/bsp/boards/embedded_artists/oem_base_board/norflash.c deleted file mode 100644 index 20f1dd8bb..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/norflash.c +++ /dev/null @@ -1,543 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ - - - -/****************************************************************************** - * Includes - *****************************************************************************/ - -#include "lpc_types.h" -#include "lpc43xx_scu.h" -#include "lpc43xx_timer.h" -#include "norflash.h" - - -/****************************************************************************** - * Defines and typedefs - *****************************************************************************/ - -#define CMD_SWID 0x90 -#define CMD_CFI_QRY 0x98 -#define CMD_ID_EXIT 0xF0 - -#define CMD_ERASE_BLOCK 0x0050 -#define CMD_ERASE_SECTOR 0x0030 -#define CMD_ERASE_CHIP 0x0010 - -#define MAN_ID_SST 0x00BF -#define DEV_ID_SST39VF3201 0x235B - -/****************************************************************************** - * External global variables - *****************************************************************************/ - -/****************************************************************************** - * Local variables - *****************************************************************************/ - -static geometry_t chip_info; - -/****************************************************************************** - * Local Functions - *****************************************************************************/ - -static void pinConfig(void) -{ - /* Set up EMC pin */ - scu_pinmux( 2 , 9 , MD_PLN_FAST , 3 );//A0 - scu_pinmux( 2 , 10 , MD_PLN_FAST , 3 );//A1 - scu_pinmux( 2 , 11 , MD_PLN_FAST , 3 );//A2 - scu_pinmux( 2 , 12 , MD_PLN_FAST , 3 );//A3 - scu_pinmux( 2 , 13 , MD_PLN_FAST , 3 );//A4 - scu_pinmux( 1 , 0 , MD_PLN_FAST , 2 );//A5 - scu_pinmux( 1 , 1 , MD_PLN_FAST , 2 );//A6 - scu_pinmux( 1 , 2 , MD_PLN_FAST , 2 );//A7 - scu_pinmux( 2 , 8 , MD_PLN_FAST , 3 );//A8 - scu_pinmux( 2 , 7 , MD_PLN_FAST , 3 );//A9 - scu_pinmux( 2 , 6 , MD_PLN_FAST , 2 );//A10 - scu_pinmux( 2 , 2 , MD_PLN_FAST , 2 );//A11 - scu_pinmux( 2 , 1 , MD_PLN_FAST , 2 );//A12 - scu_pinmux( 2 , 0 , MD_PLN_FAST , 2 );//A13 - scu_pinmux( 6 , 8 , MD_PLN_FAST , 1 );//A14 - scu_pinmux( 6 , 7 , MD_PLN_FAST , 1 );//A15 - scu_pinmux( 13 , 16 , MD_PLN_FAST , 2 );//A16 - scu_pinmux( 13 , 15 , MD_PLN_FAST , 2 );//A17 - scu_pinmux( 14 , 0 , MD_PLN_FAST , 3 );//A18 - scu_pinmux( 14 , 1 , MD_PLN_FAST , 3 );//A19 - scu_pinmux( 14 , 2 , MD_PLN_FAST , 3 );//A20 - scu_pinmux( 14 , 3 , MD_PLN_FAST , 3 );//A21 - scu_pinmux( 14 , 4 , MD_PLN_FAST , 3 );//A22 - scu_pinmux( 10 , 4 , MD_PLN_FAST , 3 );//A23 - - scu_pinmux( 1 , 7 , MD_PLN_FAST , 3 );//D0 - scu_pinmux( 1 , 8 , MD_PLN_FAST , 3 );//D1 - scu_pinmux( 1 , 9 , MD_PLN_FAST , 3 );//D2 - scu_pinmux( 1 , 10 , MD_PLN_FAST , 3 );//D3 - scu_pinmux( 1 , 11 , MD_PLN_FAST , 3 );//D4 - scu_pinmux( 1 , 12 , MD_PLN_FAST , 3 );//D5 - scu_pinmux( 1 , 13 , MD_PLN_FAST , 3 );//D6 - scu_pinmux( 1 , 14 , MD_PLN_FAST , 3 );//D7 - scu_pinmux( 5 , 4 , MD_PLN_FAST , 2 );//D8 - scu_pinmux( 5 , 5 , MD_PLN_FAST , 2 );//D9 - scu_pinmux( 5 , 6 , MD_PLN_FAST , 2 );//D10 - scu_pinmux( 5 , 7 , MD_PLN_FAST , 2 );//D11 - scu_pinmux( 5 , 0 , MD_PLN_FAST , 2 );//D12 - scu_pinmux( 5 , 1 , MD_PLN_FAST , 2 );//D13 - scu_pinmux( 5 , 2 , MD_PLN_FAST , 2 );//D14 - scu_pinmux( 5 , 3 , MD_PLN_FAST , 2 );//D15 - scu_pinmux( 13 , 2 , MD_PLN_FAST , 2 );//D16 - scu_pinmux( 13 , 3 , MD_PLN_FAST , 2 );//D17 - scu_pinmux( 13 , 4 , MD_PLN_FAST , 2 );//D18 - scu_pinmux( 13 , 5 , MD_PLN_FAST , 2 );//D19 - scu_pinmux( 13 , 6 , MD_PLN_FAST , 2 );//D20 - scu_pinmux( 13 , 7 , MD_PLN_FAST , 2 );//D21 - scu_pinmux( 13 , 8 , MD_PLN_FAST , 2 );//D22 - scu_pinmux( 13 , 9 , MD_PLN_FAST , 2 );//D23 - scu_pinmux( 14 , 5 , MD_PLN_FAST , 3 );//D24 - scu_pinmux( 14 , 6 , MD_PLN_FAST , 3 );//D25 - scu_pinmux( 14 , 7 , MD_PLN_FAST , 3 );//D26 - scu_pinmux( 14 , 8 , MD_PLN_FAST , 3 );//D27 - scu_pinmux( 14 , 9 , MD_PLN_FAST , 3 );//D28 - scu_pinmux( 14 , 10 , MD_PLN_FAST , 3 );//D29 - scu_pinmux( 14 , 11 , MD_PLN_FAST , 3 );//D30 - scu_pinmux( 14 , 12 , MD_PLN_FAST , 3 );//D31 - - scu_pinmux( 1 , 3 , MD_PLN_FAST , 3 );//OE - scu_pinmux( 1 , 6 , MD_PLN_FAST , 3 );//WE - - scu_pinmux( 1 , 4 , MD_PLN_FAST , 3 );//BLS0 - scu_pinmux( 6 , 6 , MD_PLN_FAST , 1 );//BLS1 - scu_pinmux( 13 , 13 , MD_PLN_FAST , 2 );//BLS2 - scu_pinmux( 13 , 10 , MD_PLN_FAST , 2 );//BLS3 - - scu_pinmux( 1 , 5 , MD_PLN_FAST , 3 );//CS0 - scu_pinmux( 6 , 3 , MD_PLN_FAST , 3 );//CS1 - scu_pinmux( 13 , 12 , MD_PLN_FAST , 2 );//CS2 - scu_pinmux( 13 , 11 , MD_PLN_FAST , 2 );//CS3 -} - -#if 0 -static void getIdString(uint16_t idString[11]) -{ - int i = 0; - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2aaa)) = 0x0055; - *(GET_ADDR(0x5555)) = CMD_CFI_QRY; - - for (i = 0; i < 11; i++) { - idString[i] = *(GET_ADDR(0x10 + i)); - } - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2aaa)) = 0x0055; - *(GET_ADDR(0x5555)) = CMD_ID_EXIT; -} -#endif - -static void getGeoInfo(uint16_t info[14]) -{ - int i = 0; - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2aaa)) = 0x0055; - *(GET_ADDR(0x5555)) = CMD_CFI_QRY; - - for (i = 0; i < 14; i++) { - info[i] = *(GET_ADDR(0x27 + i)); - } - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2aaa)) = 0x0055; - *(GET_ADDR(0x5555)) = CMD_ID_EXIT; -} - -static uint32_t getProductId(void) -{ - uint16_t manuid = 0; - uint16_t devid = 0; - uint32_t result = 0; - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2aaa)) = 0x0055; - *(GET_ADDR(0x5555)) = CMD_SWID; - - manuid = *(GET_ADDR(0x00)); - devid = *(GET_ADDR(0x01)); - - result = ((manuid << 16) | devid); - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2aaa)) = 0x0055; - *(GET_ADDR(0x5555)) = CMD_ID_EXIT; - - return result; -} - -/****************************************************************************** - * - * Description: - * When the SST39VF160x/320x are in the internal Program operation, any - * attempt to read DQ7 will produce the complement of the true data. Once - * the Program operation is completed, DQ7 will produce true data. Note - * that even though DQ7 may have valid data immediately following the - * completion of an internal Write operation, the remaining data outputs - * may still be invalid: valid data on the entire data bus will appear in - * subsequent successive Read cycles after an interval of 1 �s. During - * internal Erase operation, any attempt to read DQ7 will produce a '0'. - * Once the internal Erase operation is completed, DQ7 will produce a '1'. - * - * Parameters: - * addr The device address - * data The original (true) data - * timeout Maximum number of loops to delay - * - * Returns: - * TRUE if success - * - *****************************************************************************/ -static uint16_t check_data_polling(uint32_t addr, uint16_t data, uint32_t timeout) -{ - volatile uint16_t *p = (uint16_t*) addr; - uint16_t true_data = data & 0x80; - int i; - - for (i = 0; i < timeout; i++) - { - if ( true_data == (*p &0x80) ) - { - TIM_Waitus(1); - return (TRUE); - } - } - return (FALSE); -} - -/****************************************************************************** - * - * Description: - * During the internal Program or Erase operation, any consecutive attempts - * to read DQ6 will produce alternating �1�s and �0�s, i.e., toggling - * between 1 and 0. When the internal Program or Erase operation is - * completed, the DQ6 bit will stop toggling. The device is then ready - * for the next operation. - * - * Parameters: - * addr The device address - * timeout Maximum number of loops to delay - * - * Returns: - * TRUE if success - * - *****************************************************************************/ -static uint16_t check_toggle_ready(uint32_t addr, uint32_t timeout) -{ - volatile uint16_t *p = (uint16_t*) addr; - uint16_t predata, currdata; - int i; - - predata = *p & 0x40; - for (i = 0; i < timeout; i++) - { - currdata = *p & 0x40; - if (predata == currdata) - { - TIM_Waitus(1); - return (TRUE); - } - predata = currdata; - } - return (FALSE); -} - -/****************************************************************************** - * Public Functions - *****************************************************************************/ - - - -/****************************************************************************** - * - * Description: - * Initialize the NOR Flash - * - *****************************************************************************/ -uint32_t norflash_init() -{ - uint32_t prodId = 0; - -// LPC_SC->PCONP |= 0x00000800; - - LPC_EMC->CONTROL = 0x00000001; - - LPC_EMC->CONFIG = 0x00000000; - - //Disable Auto-Byte Addressing (on boards designed for LPC24xx) - //LPC_SC->SCS |= 0x00000001; - - pinConfig(); - - LPC_EMC->STATICCONFIG0 = 0x00000081; - - LPC_EMC->STATICWAITWEN0 = 0x00000003; /* ( n + 1 ) -> 4 clock cycles */ - LPC_EMC->STATICWAITOEN0 = 0x00000003; /* ( n ) -> 0 clock cycles */ - LPC_EMC->STATICWAITRD0 = 0x00000006; /* ( n + 1 ) -> 7 clock cycles */ - LPC_EMC->STATICWAITPAG0 = 0x00000003; /* ( n + 1 ) -> 4 clock cycles */ - LPC_EMC->STATICWAITWR0 = 0x00000005; /* ( n + 2 ) -> 7 clock cycles */ - LPC_EMC->STATICWAITTURN0 = 0x00000003; /* ( n + 1 ) -> 4 clock cycles */ - -#if 0 - M32(0x40086400) = 3;//SFSP8_0, pin config P8_0, FUNC3, (PUP_DISABLE | PDN_DISABLE | INBUF_DISABLE | FILTER_ENABLE) - M32(0x40086404) = 3;//SFSP8_1, pin config P8_1, FUNC3, (PUP_DISABLE | PDN_DISABLE | INBUF_DISABLE | FILTER_ENABLE) - M32(0x40086408) = 3;//SFSP8_2, pin config P8_2, FUNC3, (PUP_DISABLE | PDN_DISABLE | INBUF_DISABLE | FILTER_ENABLE) - M32(0x4008640C) = 3;//SFSP8_3, pin config P8_3, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) - M32(0x40086410) = 3;//SFSP8_4, pin config P8_4, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) - M32(0x40086414) = 3;//SFSP8_5, pin config P8_5, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) - M32(0x40086418) = 3;//SFSP8_6, pin config P8_6, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) - M32(0x4008641C) = 3;//SFSP8_7, pin config P8_7, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) -#endif - - prodId = getProductId(); - - if (prodId == ((MAN_ID_SST << 16) | DEV_ID_SST39VF3201)) { - - uint16_t info[14]; - getGeoInfo(info); - chip_info.device_size = 1 << info[0]; - chip_info.num_sectors = ((info[7] << 8) | info[6]) + 1; - chip_info.sector_size = ((info[9] << 8) | info[8]) * 256; - chip_info.num_blocks = ((info[11] << 8) | info[10]) + 1; - chip_info.block_size = ((info[13] << 8) | info[12]) * 256; - - return TRUE; - } - - return FALSE; -} - -void norflash_getGeometry(geometry_t* geometry) -{ - *geometry = chip_info; -} - - -uint32_t norflash_eraseSector(uint32_t addr) -{ - volatile uint16_t* p; - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = 0x0080; - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - - p = (uint16_t*) addr; - *p = CMD_ERASE_SECTOR; - - return check_data_polling(addr, 0xffff, 500000); -} - -uint32_t norflash_eraseBlock(uint32_t addr) -{ - volatile uint16_t* p; - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = 0x0080; - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - - p = (uint16_t*) addr; - *p = CMD_ERASE_BLOCK; - - return check_toggle_ready(addr, 500000); -} - -uint32_t norflash_eraseEntireChip(void) -{ - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = 0x0080; - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = CMD_ERASE_CHIP; - - return check_toggle_ready(NORFLASH_BASE, 500000); -} - -uint32_t norflash_writeWord(uint32_t addr, uint16_t data) -{ - volatile uint16_t *p; - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = 0x00A0; - - p = (uint16_t*) addr; - *p = data; - - return check_toggle_ready(addr, 500000); -} - -uint32_t norflash_writeBuff(uint32_t addr, uint16_t* data, uint16_t len) -{ - uint16_t i; - for (i = 0; i < len; i++) - { - if (!norflash_writeWord(addr, data[i])) - { - return (FALSE); - } - } - return (TRUE); -} - -/****************************************************************************** - * - * Description: - * Reads the security information from the chip. For an explanation - * see the user manual. - * - * Parameters: - * SST_SecID The factory programmed security segment - * User_SecID The user defined security segment - * - *****************************************************************************/ -void norflash_secid_read(uint16_t SST_SecID[8], uint16_t User_SecID[8]) -{ - uint16_t i; - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = 0x0088; - - for (i = 0; i < 7; i++) - { - SST_SecID[i] = *(GET_ADDR(i)); // SST security is 0x00 - 0x07 - User_SecID[i] = *(GET_ADDR(i + 0x10)); // User security is 0x10 - 0x17 - } - - // exit command - *(GET_ADDR(0x5555)) = CMD_ID_EXIT; -} - -/****************************************************************************** - * - * Description: - * Checks if the user defined security segment has been locked or not. - * See the user manual for more information. - * - * Returns: - * TRUE if the segment is locked - * - *****************************************************************************/ -uint32_t norflash_secid_getLockStatus(void) -{ - uint16_t status; - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = 0x0088; - - // read status - status = *(GET_ADDR(0xff)); - status &= 0x0008; - - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = CMD_ID_EXIT; - - if (!status) - return TRUE; // locked - return FALSE; // not locked -} - -/****************************************************************************** - * - * Description: - * Lock the user security segment. CANNOT BE UNDONE. - * See the user manual for more information. - * - * Returns: - * TRUE if the segment is locked after programming - * - *****************************************************************************/ -uint32_t norflash_secid_lockOut() -{ - // Code not verified. Use at own risk -#if 0 - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = 0x0085; - *(GET_ADDR(0x0 )) = 0x0000; // Write 0x0000 to any address - - if (check_toggle_ready(GET_ADDR(0x0), 500000)) - { - return norflash_secid_getLockStatus(); - } -#endif - return FALSE; -} - -/****************************************************************************** - * - * Description: - * Writes data to the user security segment (0x0010 - 0x0017). - * See the user manual for more information. - * - * Parameters: - * target Must be in the range 0x10 to 0x17 - * data The data to write - * len The number of words to write - * - * Returns: - * TRUE if the programming was successful - * - *****************************************************************************/ -uint32_t norflash_secid_writeWord(uint16_t target, uint16_t* data, uint16_t len) -{ - // Code not verified. Use at own risk -#if 0 - uint16_t i; - - if ((target < 0x10) || (target > 0x17)) - return FALSE; - - if ((len > 8) || ((target + len) > 0x17)) - return FALSE; - - for (i = 0; i < len; i++) - { - *(GET_ADDR(0x5555)) = 0x00AA; - *(GET_ADDR(0x2AAA)) = 0x0055; - *(GET_ADDR(0x5555)) = 0x00A5; - *(GET_ADDR(target + i)) = data; - - data++; - - /* Read the toggle bit to detect end-of-programming for User Sec ID. - Do Not use Data# Polling for User_SecID_Word_Program!! */ - if (!check_toggle_ready(GET_ADDR(target + i), 500000)) - return FALSE; - } -#endif - - return TRUE; -} - diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/norflash.h b/demos/bsp/boards/embedded_artists/oem_base_board/norflash.h deleted file mode 100644 index 11eb675e6..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/norflash.h +++ /dev/null @@ -1,56 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __NORFLASH_H -#define __NORFLASH_H - -#define NORFLASH_SIZE 0x400000 /*Bytes or 0x200000 16bit words*/ -#define NORFLASH_BLOCK_SIZE 0x10000 /*Bytes, or 32K 16bit words*/ -#define NORFLASH_BASE 0x1C000000 - -//16 bit data -#define GET_ADDR(addr) (volatile uint16_t *)(NORFLASH_BASE | ((addr) << 1)) - -typedef struct -{ - uint32_t device_size; /* Device size in bytes */ - uint32_t num_sectors; /* Number of sectors */ - uint32_t sector_size; /* Sector size in bytes */ - uint32_t num_blocks; /* Number of blocks */ - uint32_t block_size; /* Block size in bytes */ -} geometry_t; - -extern uint32_t norflash_init(void); - -extern void norflash_getGeometry(geometry_t* geometry); - -extern uint32_t norflash_eraseBlock(uint32_t addr); -extern uint32_t norflash_eraseSector(uint32_t addr); -extern uint32_t norflash_eraseEntireChip(void); - -extern uint32_t norflash_writeWord(uint32_t addr, uint16_t data); -extern uint32_t norflash_writeBuff(uint32_t addr, uint16_t* data, uint16_t len); - -extern void norflash_secid_read(uint16_t SST_SecID[8], uint16_t user_SecID[8]); -extern uint32_t norflash_secid_getLockStatus(void); -extern uint32_t norflash_secid_lockOut(void); -extern uint32_t norflash_secid_writeWord(uint16_t target, uint16_t* data, uint16_t len); - -#endif /* end __NORFLASH_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/pca9532.c b/demos/bsp/boards/embedded_artists/oem_base_board/pca9532.c deleted file mode 100644 index d663604c3..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/pca9532.c +++ /dev/null @@ -1,349 +0,0 @@ -/*****************************************************************************
- *
- * Copyright(C) 2011, Embedded Artists AB
- * All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-
-/*
- * NOTE: I2C must have been initialized before calling any functions in this
- * file.
- */
-
-/******************************************************************************
- * Includes
- *****************************************************************************/
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include "lpc43xx_i2c.h"
-#include "lpc43xx_cgu.h"
-#include "lpc_types.h"
-#include "pca9532.h"
-
-/******************************************************************************
- * Defines and typedefs
- *****************************************************************************/
-
-#define I2C_PORT (LPC_I2C0)
-
-#define LS_MODE_ON 0x01
-#define LS_MODE_BLINK0 0x02
-#define LS_MODE_BLINK1 0x03
-
-/******************************************************************************
- * External global variables
- *****************************************************************************/
-
-
-/******************************************************************************
- * Local variables
- *****************************************************************************/
-
-static uint16_t blink0Shadow = 0;
-static uint16_t blink1Shadow = 0;
-static uint16_t ledStateShadow = 0;
-
-/******************************************************************************
- * Local Functions
- *****************************************************************************/
-
-static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len)
-{
- I2C_M_SETUP_Type i2cData;
-
- i2cData.sl_addr7bit = addr;
- i2cData.tx_data = buf;
- i2cData.tx_length = len;
- i2cData.rx_data = NULL;
- i2cData.rx_length = 0;
- i2cData.retransmissions_max = 3;
-
- return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len)
-{
- I2C_M_SETUP_Type i2cData;
-
- i2cData.sl_addr7bit = addr;
- i2cData.tx_data = NULL;
- i2cData.tx_length = 0;
- i2cData.rx_data = buf;
- i2cData.rx_length = len;
- i2cData.retransmissions_max = 3;
-
- return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-static void setLsStates(uint16_t states, uint8_t* ls, uint8_t mode)
-{
-#define IS_LED_SET(bit, x) ( ( ((x) & (bit)) != 0 ) ? 1 : 0 )
-
- int i = 0;
-
- for (i = 0; i < 4; i++) {
-
- ls[i] |= ( (IS_LED_SET(0x0001, states)*mode << 0)
- | (IS_LED_SET(0x0002, states)*mode << 2)
- | (IS_LED_SET(0x0004, states)*mode << 4)
- | (IS_LED_SET(0x0008, states)*mode << 6) );
-
- states >>= 4;
- }
-}
-
-static void setLeds(void)
-{
- uint8_t buf[5];
- uint8_t ls[4] = {0,0,0,0};
- uint16_t states = ledStateShadow;
-
- /* LEDs in On/Off state */
- setLsStates(states, ls, LS_MODE_ON);
-
- /* set the LEDs that should blink */
- setLsStates(blink0Shadow, ls, LS_MODE_BLINK0);
- setLsStates(blink1Shadow, ls, LS_MODE_BLINK1);
-
-
- buf[0] = PCA9532_LS0 | PCA9532_AUTO_INC;
- buf[1] = ls[0];
- buf[2] = ls[1];
- buf[3] = ls[2];
- buf[4] = ls[3];
- I2CWrite(PCA9532_I2C_ADDR, buf, 5);
-}
-
-/******************************************************************************
- * Public Functions
- *****************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- * Initialize the PCA9532 Device
- *
- *****************************************************************************/
-void pca9532_init (void)
-{
- /* nothing to initialize */
-}
-
-/******************************************************************************
- *
- * Description:
- * Get the LED states
- *
- * Params:
- * [in] shadow - TRUE if the states should be retrieved from the shadow
- * variables. The shadow variable are updated when any
- * of setLeds, setBlink0Leds and/or setBlink1Leds are
- * called.
- *
- * FALSE if the state should be retrieved from the PCA9532
- * device. A blinkin LED may be reported as on or off
- * depending on the state when calling the function.
- *
- * Returns:
- * A mask where a 1 indicates that a LED is on (or blinking).
- *
- *****************************************************************************/
-uint16_t pca9532_getLedState (uint32_t shadow)
-{
- uint8_t buf[2];
- uint16_t ret = 0;
-
- if (shadow) {
- /* a blink LED is reported as on*/
- ret = (ledStateShadow | blink0Shadow | blink1Shadow);
- }
- else {
-
- /*
- * A blinking LED may be reported as on or off depending on
- * its state when reading the Input register.
- */
-
- buf[0] = PCA9532_INPUT0;
- I2CWrite(PCA9532_I2C_ADDR, buf, 1);
-
- I2CRead(PCA9532_I2C_ADDR, buf, 1);
- ret = buf[0];
-
-
- buf[0] = PCA9532_INPUT1;
- I2CWrite(PCA9532_I2C_ADDR, buf, 1);
-
- I2CRead(PCA9532_I2C_ADDR, buf, 1);
- ret |= (buf[0] << 8);
-
-
- /* invert since LEDs are active low */
- ret = ((~ret) & 0xFFFF);
- }
-
- return (ret & ~PCA9532_NOT_USED);
-}
-
-
-/******************************************************************************
- *
- * Description:
- * Set LED states (on or off).
- *
- * Params:
- * [in] ledOnMask - The LEDs that should be turned on. This mask has
- * priority over ledOffMask
- * [in] ledOffMask - The LEDs that should be turned off.
- *
- *****************************************************************************/
-void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask)
-{
- /* turn off leds */
- ledStateShadow &= (~(ledOffMask) & 0xffff);
-
- /* ledOnMask has priority over ledOffMask */
- ledStateShadow |= ledOnMask;
-
- /* turn off blinking */
- blink0Shadow &= (~(ledOffMask) & 0xffff);
- blink1Shadow &= (~(ledOffMask) & 0xffff);
-
- setLeds();
-}
-
-/******************************************************************************
- *
- * Description:
- * Set the blink period for PWM0. Valid values are 0 - 255 where 0
- * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz.
- *
- * Params:
- * [in] period - the period for pwm0
- *
- *****************************************************************************/
-void pca9532_setBlink0Period(uint8_t period)
-{
- uint8_t buf[2];
-
- buf[0] = PCA9532_PSC0;
- buf[1] = period;
- I2CWrite(PCA9532_I2C_ADDR, buf, 2);
-}
-
-/******************************************************************************
- *
- * Description:
- * Set the duty cycle for PWM0. Valid values are 0 - 100. 25 means the LED
- * is on 25% of the period.
- *
- * Params:
- * [in] duty - duty cycle
- *
- *****************************************************************************/
-void pca9532_setBlink0Duty(uint8_t duty)
-{
- uint8_t buf[2];
- uint32_t tmp = duty;
- if (tmp > 100) {
- tmp = 100;
- }
-
- tmp = (256 * tmp)/100;
-
- buf[0] = PCA9532_PWM0;
- buf[1] = tmp;
- I2CWrite(PCA9532_I2C_ADDR, buf, 2);
-}
-
-/******************************************************************************
- *
- * Description:
- * Set the LEDs that should blink with rate and duty cycle from PWM0.
- * Blinking is turned off with pca9532_setLeds.
- *
- * Params:
- * [in] ledMask - LEDs that should blink.
- *
- *****************************************************************************/
-void pca9532_setBlink0Leds(uint16_t ledMask)
-{
- blink0Shadow |= ledMask;
- setLeds();
-}
-
-/******************************************************************************
- *
- * Description:
- * Set the blink period for PWM1. Valid values are 0 - 255 where 0
- * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz.
- *
- * Params:
- * [in] period - The period for PWM1
- *
- *****************************************************************************/
-void pca9532_setBlink1Period(uint8_t period)
-{
- uint8_t buf[2];
-
- buf[0] = PCA9532_PSC1;
- buf[1] = period;
- I2CWrite(PCA9532_I2C_ADDR, buf, 2);
-}
-
-/******************************************************************************
- *
- * Description:
- * Set the duty cycle for PWM1. Valid values are 0 - 100. 25 means the LED
- * is on 25% of the period.
- *
- * Params:
- * [in] duty - duty cycle.
- *
- *****************************************************************************/
-void pca9532_setBlink1Duty(uint8_t duty)
-{
- uint8_t buf[2];
-
- uint32_t tmp = duty;
- if (tmp > 100) {
- tmp = 100;
- }
-
- tmp = (256 * tmp)/100;
-
- buf[0] = PCA9532_PWM1;
- buf[1] = tmp;
- I2CWrite(PCA9532_I2C_ADDR, buf, 2);
-}
-
-/******************************************************************************
- *
- * Description:
- * Set the LEDs that should blink with rate and duty cycle from PWM1.
- * Blinking is turned off with pca9532_setLeds.
- *
- * Params:
- * [in] ledMask - LEDs that should blink.
- *
- *****************************************************************************/
-void pca9532_setBlink1Leds(uint16_t ledMask)
-{
- blink1Shadow |= ledMask;
- setLeds();
-}
-
-#endif
diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/pca9532.h b/demos/bsp/boards/embedded_artists/oem_base_board/pca9532.h deleted file mode 100644 index 885075326..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/pca9532.h +++ /dev/null @@ -1,94 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __PCA9532C_H -#define __PCA9532C_H - - -#define PCA9532_I2C_ADDR (0x60) - -#define PCA9532_INPUT0 0x00 -#define PCA9532_INPUT1 0x01 -#define PCA9532_PSC0 0x02 -#define PCA9532_PWM0 0x03 -#define PCA9532_PSC1 0x04 -#define PCA9532_PWM1 0x05 -#define PCA9532_LS0 0x06 -#define PCA9532_LS1 0x07 -#define PCA9532_LS2 0x08 -#define PCA9532_LS3 0x09 - -#define PCA9532_AUTO_INC 0x10 - - -/* - * The Keys on the base board are mapped to LED0 -> LED3 on - * the PCA9532. - */ - -#define KEY1 0x0001 -#define KEY2 0x0002 -#define KEY3 0x0004 -#define KEY4 0x0008 - -#define KEY_MASK 0x000F - -/* - * MMC Card Detect and MMC Write Protect are mapped to LED4 - * and LED5 on the PCA9532. Please note that WP is active low. - */ - -#define MMC_CD 0x0010 -#define MMC_WP 0x0020 - -#define MMC_MASK 0x30 - -/* NOTE: LED6 and LED7 on PCA9532 are not connected to anything */ -#define PCA9532_NOT_USED 0xC0 - -/* - * Below are the LED constants to use when enabling/disabling a LED. - * The LED names are the names printed on the base board and not - * the names from the PCA9532 device. base_LED1 -> LED8 on PCA9532, - * base_LED2 -> LED9, and so on. - */ - -#define LED1 0x0100 -#define LED2 0x0200 -#define LED3 0x0400 -#define LED4 0x0800 -#define LED5 0x1000 -#define LED6 0x2000 -#define LED7 0x4000 -#define LED8 0x8000 - -#define LED_MASK 0xFF00 - -void pca9532_init (void); -uint16_t pca9532_getLedState (uint32_t shadow); -void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask); -void pca9532_setBlink0Period(uint8_t period); -void pca9532_setBlink0Duty(uint8_t duty); -void pca9532_setBlink0Leds(uint16_t ledMask); -void pca9532_setBlink1Period(uint8_t period); -void pca9532_setBlink1Duty(uint8_t duty); -void pca9532_setBlink1Leds(uint16_t ledMask); - -#endif /* end __PCA9532C_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/uda1380.c b/demos/bsp/boards/embedded_artists/oem_base_board/uda1380.c deleted file mode 100644 index 3528ac6e0..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/uda1380.c +++ /dev/null @@ -1,156 +0,0 @@ - -#include "lpc43xx_i2c.h" -#include "lpc43xx_scu.h" -#include "uda1380.h" - -//Uda1380 link to I2C0 only -#define UDA1380_I2C LPC_I2C0 - - - -/*********************************************************************//** - * @brief Initialize Uda1380 - * @param[in] i2cClockFreq I2C clock frequency that Uda1380 operate - * @param[in] i2sClockFreq I2S bit clock frequency - * @return None - **********************************************************************/ -int32_t Uda1380_Init(uint32_t i2cClockFreq, uint32_t i2sClockFreq) -{ - int32_t ret; - uint8_t clk; - -// // Config Pin for I2C_SDA and I2C_SCL of I2C0 -// scu_pinmux( 2 , 3 , MD_PLN_FAST, FUNC1 ); -// scu_pinmux( 2 , 4 , MD_PLN_FAST, FUNC1 ); - - I2C_Init(UDA1380_I2C, i2cClockFreq); - - /* Enable I2C1 operation */ - I2C_Cmd(UDA1380_I2C, ENABLE); - - /* Reset */ - ret = Uda1380_WriteData(UDA1380_REG_L3, 0 ); - if(ret != UDA1380_FUNC_OK) - return ret; - - /* Write clock settings */ - ret = Uda1380_WriteData(UDA1380_REG_I2S,0 ); - if(ret != UDA1380_FUNC_OK) - return ret; - - ret = Uda1380_WriteData(UDA1380_REG_MSTRMUTE,0); - if(ret != UDA1380_FUNC_OK) - return ret; - - ret = Uda1380_WriteData(UDA1380_REG_MIXSDO,0); - if(ret != UDA1380_FUNC_OK) - return ret; - -#if UDA1380_SYSCLK_USED //Use SYSCLK - ret = Uda1380_WriteData(UDA1380_REG_EVALCLK, - EVALCLK_DEC_EN | EVALCLK_DAC_EN | EVALCLK_INT_EN | EVALCLK_DAC_SEL_SYSCLK ); - if(ret != UDA1380_FUNC_OK) - return ret; - - ret = Uda1380_WriteData(UDA1380_REG_PWRCTRL, - PWR_PON_HP_EN | PWR_PON_DAC_EN | PWR_PON_BIAS_EN); - if(ret != UDA1380_FUNC_OK) - return ret; - -#else //Use WSPLL - if(i2sClockFreq >= 6250 && i2sClockFreq < 12500) - clk = EVALCLK_WSPLL_SEL6_12K; - else if(i2sClockFreq >= 12501 && i2sClockFreq < 25000) - clk = EVALCLK_WSPLL_SEL12_25K; - else if(i2sClockFreq >= 25001 && i2sClockFreq < 50000) - clk = EVALCLK_WSPLL_SEL25_50K; - else if(i2sClockFreq >= 50001 && i2sClockFreq < 100000) - clk = EVALCLK_WSPLL_SEL50_100K; - else - clk= 0; - - ret = Uda1380_WriteData(UDA1380_REG_EVALCLK, - EVALCLK_DEC_EN | EVALCLK_DAC_EN | EVALCLK_INT_EN | EVALCLK_DAC_SEL_WSPLL | clk); - if(ret != UDA1380_FUNC_OK) - return ret; - - ret = Uda1380_WriteData(UDA1380_REG_PWRCTRL, - PWR_PON_PLL_EN | PWR_PON_HP_EN | PWR_PON_DAC_EN | PWR_PON_BIAS_EN); - if(ret != UDA1380_FUNC_OK) - return ret; -#endif - return UDA1380_FUNC_OK; -} - -/*********************************************************************//** - * @brief Write data to a register of Uda1380 - * @param[in] reg Register address - * @param[out] data data value. - * @return None - **********************************************************************/ -int32_t Uda1380_WriteData(uint8_t reg, uint16_t data) -{ - I2C_M_SETUP_Type i2cData; - uint8_t i2cBuf[UDA1380_CMD_BUFF_SIZE]; - - i2cBuf[0] = reg; - i2cBuf[1] = (data >> 8) & 0xFF; - i2cBuf[2] = data & 0xFF; - - i2cData.sl_addr7bit = UDA1380_SLAVE_ADDR; - i2cData.tx_length = UDA1380_CMD_BUFF_SIZE; - i2cData.tx_data = i2cBuf; - i2cData.rx_data = NULL; - i2cData.rx_length = 0; - i2cData.retransmissions_max = 3; - - if (I2C_MasterTransferData(UDA1380_I2C, &i2cData, I2C_TRANSFER_POLLING) == SUCCESS) - { - uint16_t dataTmp; - if(Uda1380_ReadData(reg, &dataTmp) != UDA1380_FUNC_OK) { - return UDA1380_FUNC_ERR; - } - if(dataTmp != data) - return UDA1380_FUNC_ERR; - - return UDA1380_FUNC_OK; - } - - return UDA1380_FUNC_ERR; -} - - -/*********************************************************************//** - * @brief Read data stored in register of Uda1380 - * @param[in] reg Register address - * @param[out] data point to the buffer which is used for storing data. - * @return None - **********************************************************************/ -int32_t Uda1380_ReadData(uint8_t reg, uint16_t *data) -{ - I2C_M_SETUP_Type i2cData; - uint8_t i2cBuf[UDA1380_CMD_BUFF_SIZE]; - - if(data == NULL) - return UDA1380_FUNC_ERR; - - i2cBuf[0] = reg; - - i2cData.sl_addr7bit = UDA1380_SLAVE_ADDR; - i2cData.tx_length = 1; - i2cData.tx_data = i2cBuf; - i2cData.rx_data = &i2cBuf[1]; - i2cData.rx_length = UDA1380_CMD_BUFF_SIZE - 1; - i2cData.retransmissions_max = 3; - - if (I2C_MasterTransferData(UDA1380_I2C, &i2cData, I2C_TRANSFER_POLLING) == SUCCESS) - { - *data = i2cBuf[1] << 8 | i2cBuf[2]; - return UDA1380_FUNC_OK; - } - - return UDA1380_FUNC_ERR; -} - - - diff --git a/demos/bsp/boards/embedded_artists/oem_base_board/uda1380.h b/demos/bsp/boards/embedded_artists/oem_base_board/uda1380.h deleted file mode 100644 index b953cf501..000000000 --- a/demos/bsp/boards/embedded_artists/oem_base_board/uda1380.h +++ /dev/null @@ -1,93 +0,0 @@ -#ifndef _UDA1380_H_ -#define _UDA1380_H_ - -#include "lpc_types.h" - -#define UDA1380_SYSCLK_USED 0 -#define UDA1380_SLAVE_ADDR 0x1A -#define UDA1380_CMD_BUFF_SIZE 3 - -/** UDA1380 Registers */ -#define UDA1380_REG_EVALCLK 0x00 -#define UDA1380_REG_I2S 0x01 -#define UDA1380_REG_PWRCTRL 0x02 -#define UDA1380_REG_ANAMIX 0x03 -#define UDA1380_REG_HEADAMP 0x04 -#define UDA1380_REG_MSTRVOL 0x10 -#define UDA1380_REG_MIXVOL 0x11 -#define UDA1380_REG_MODEBBT 0x12 -#define UDA1380_REG_MSTRMUTE 0x13 -#define UDA1380_REG_MIXSDO 0x14 -#define UDA1380_REG_DECVOL 0x20 -#define UDA1380_REG_PGA 0x21 -#define UDA1380_REG_ADC 0x22 -#define UDA1380_REG_AGC 0x23 -#define UDA1380_REG_L3 0x7f -#define UDA1380_REG_HEADPHONE 0x18 -#define UDA1380_REG_DEC 0x28 - -// UDA1380_REG_EVALCLK bit defines -#define EVALCLK_ADC_EN 0x0800 // Enable ADC clock -#define EVALCLK_DEC_EN 0x0400 // Enable decimator clock -#define EVALCLK_DAC_EN 0x0200 // Enable DAC clock -#define EVALCLK_INT_EN 0x0100 // Enable interpolator clock -#define EVALCLK_ADC_SEL_WSPLL 0x0020 // Select SYSCLK input for ADC clock -#define EVALCLK_ADC_SEL_SYSCLK 0x0000 // Select WSPLL clock for ADC clock -#define EVALCLK_DAC_SEL_WSPLL 0x0010 // Select SYSCLK input for DAC clock -#define EVALCLK_DAC_SEL_SYSCLK 0x0000 // Select WSPLL clock for DAC clock -#define EVALCLK_SYSDIV_SEL(n) ((n) << 2) // System clock input divider select -#define EVALCLK_WSPLL_SEL6_12K 0x0000 // WSPLL input freq selection = 6.25 to 12.5K -#define EVALCLK_WSPLL_SEL12_25K 0x0001 // WSPLL input freq selection = 12.5K to 25K -#define EVALCLK_WSPLL_SEL25_50K 0x0002 // WSPLL input freq selection = 25K to 50K -#define EVALCLK_WSPLL_SEL50_100K 0x0003 // WSPLL input freq selection = 50K to 100K - -// UDA1380_REG_I2S -#define I2S_SFORI_I2S 0x0000 -#define I2S_SFORI_LSB16 0x0100 -#define I2S_SFORI_LSB18 0x0200 -#define I2S_SFORI_LSB20 0x0300 -#define I2S_SFORI_MSB 0x0500 -#define I2S_SFORI_MASK 0x0700 -#define I2S_SFORO_I2S 0x0000 -#define I2S_SFORO_LSB16 0x0001 -#define I2S_SFORO_LSB18 0x0002 -#define I2S_SFORO_LSB20 0x0003 -#define I2S_SFORO_LSB24 0x0004 -#define I2S_SFORO_MSB 0x0005 -#define I2S_SFORO_MASK 0x0007 -#define I2S_SEL_SOURCE 0x0040 -#define I2S_SIM 0x0010 - -// UDA1380_REG_PWRCTRL bit defines -#define PWR_PON_PLL_EN 0x8000 // WSPLL enable -#define PWR_PON_HP_EN 0x2000 // Headphone driver enable -#define PWR_PON_DAC_EN 0x0400 // DAC power enable -#define PWR_PON_BIAS_EN 0x0100 // Power on bias enable (for ADC, AVC, and FSDAC) -#define PWR_EN_AVC_EN 0x0080 // Analog mixer enable -#define PWR_PON_AVC_EN 0x0040 // Analog mixer power enable -#define PWR_EN_LNA_EN 0x0010 // LNA and SDC power enable -#define PWR_EN_PGAL_EN 0x0008 // PGA left power enable -#define PWR_EN_ADCL_EN 0x0004 // ADC left power enable -#define PWR_EN_PGAR_EN 0x0002 // PGA right power enable -#define PWR_EN_ADCR_EN 0x0001 // ADC right power enable - -// UDA1380_REG_MSTRMUTE bit defines -#define MSTRMUTE_MTM_MUTE_EN 0x4000 // Master mute enable -#define MSRTMUTE_CHANNEL2_MUTE_EN 0x0800 -#define MSRTMUTE_CHANNEL1_MUTE_EN 0x0008 - - -// UDA1380_REG_MODEBBT bit defines -#define MODEBBT_BOOST_FLAT 0x0000 // Bits for selecting flat boost -#define MODEBBT_BOOST_FULL 0xC000 // Bits for selecting maximum boost -#define MODEBBT_BOOST_MASK 0xC000 // Bits for selecting boost mask - -#define UDA1380_FUNC_OK 0 -#define UDA1380_FUNC_ERR -1 - -int32_t Uda1380_Init(uint32_t i2cClockFreq, uint32_t i2sClockFreq); -int32_t Uda1380_WriteData(uint8_t reg, uint16_t data); -int32_t Uda1380_ReadData(uint8_t reg, uint16_t *data); - - -#endif /* _UDA1380_H_ */ diff --git a/demos/bsp/boards/hitex/board_hitex4350.c b/demos/bsp/boards/hitex/board_hitex4350.c deleted file mode 100644 index 5422fad4c..000000000 --- a/demos/bsp/boards/hitex/board_hitex4350.c +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************/ -/*! - @file board_hitex4350.c - @author hathach (tinyusb.org) - - @section LICENSE - - Software License Agreement (BSD License) - - Copyright (c) 2013, hathach (tinyusb.org) - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - 3. Neither the name of the copyright holders nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY - DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - This file is part of the tinyusb stack. -*/ -/**************************************************************************/ - -#include "../board.h" - -#if BOARD == BOARD_HITEX4350 - -//--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF -//--------------------------------------------------------------------+ - -//--------------------------------------------------------------------+ -// INTERNAL OBJECT & FUNCTION DECLARATION -//--------------------------------------------------------------------+ - -//--------------------------------------------------------------------+ -// IMPLEMENTATION -//--------------------------------------------------------------------+ -void board_init(void) -{ - CGU_Init(); - SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer - - //------------- USB Bus power HOST ONLY-------------// - // Hitex VBUS0 is P2_3 - scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7); // USB0_PWR_EN, USB0 VBus function - scu_pinmux(0x6, 3, MD_PUP | MD_EZI, FUNC1); // P6_3 USB0_PWR_EN, USB0 VBus function - - // Hitex VBUS1 is P9_5 - scu_pinmux(0x9, 5, MD_PUP | MD_EZI, FUNC2); // USB1_PWR_EN, USB1 VBus function - - //------------- LEDs init -------------// - // TODO Leds for hitex - - //------------- UART init -------------// - #if CFG_UART_ENABLE - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN , FUNC1); - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE; - UARTConfigStruct.Clock_Speed = 0; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit - #endif - -} - -//--------------------------------------------------------------------+ -// LEDS -//--------------------------------------------------------------------+ -void board_leds(uint32_t on_mask, uint32_t off_mask) -{ - // TODO LED for hitex -} - -//--------------------------------------------------------------------+ -// UART -//--------------------------------------------------------------------+ -#if CFG_UART_ENABLE -uint32_t board_uart_send(uint8_t *buffer, uint32_t length) -{ - return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING); -} - -uint32_t board_uart_recv(uint8_t *buffer, uint32_t length) -{ - return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING); -} -#endif - -#endif diff --git a/demos/bsp/boards/hitex/board_hitex4350.h b/demos/bsp/boards/hitex/board_hitex4350.h deleted file mode 100644 index 0d7a53666..000000000 --- a/demos/bsp/boards/hitex/board_hitex4350.h +++ /dev/null @@ -1,67 +0,0 @@ -/**************************************************************************/ -/*! - @file board_hitex4350.h - @author hathach (tinyusb.org) - - @section LICENSE - - Software License Agreement (BSD License) - - Copyright (c) 2013, hathach (tinyusb.org) - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - 3. Neither the name of the copyright holders nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY - DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - This file is part of the tinyusb stack. -*/ -/**************************************************************************/ - -/** \ingroup TBD - * \defgroup TBD - * \brief TBD - * - * @{ - */ - -#ifndef _TUSB_BOARD_HITEX4350_H_ -#define _TUSB_BOARD_HITEX4350_H_ - -#include "LPC43xx.h" -#include "lpc43xx_scu.h" -#include "lpc43xx_cgu.h" -#include "lpc43xx_gpio.h" -#include "lpc43xx_uart.h" - -#ifdef __cplusplus - extern "C" { -#endif - -#define CFG_PRINTF_TARGET PRINTF_TARGET_SEMIHOST - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_BOARD_HITEX4350_H_ */ - -/** @} */ diff --git a/demos/bsp/boards/keil/board_mcb4300.c b/demos/bsp/boards/keil/board_mcb4300.c deleted file mode 100644 index 773dab4c5..000000000 --- a/demos/bsp/boards/keil/board_mcb4300.c +++ /dev/null @@ -1,148 +0,0 @@ -/**************************************************************************/ -/*! - @file board_mcb4300.c - @author hathach (tinyusb.org) - - @section LICENSE - - Software License Agreement (BSD License) - - Copyright (c) 2013, hathach (tinyusb.org) - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - 3. Neither the name of the copyright holders nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY - DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND - ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - This file is part of the tinyusb stack. -*/ -/**************************************************************************/ - -#include "../board.h" - -#if BOARD == BOARD_MCB4300 - -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ -#define BOARD_MAX_LEDS 8 - -#define BOARD_UART_PORT LPC_USART0 -#define BOARD_UART_PIN_PORT 2 -#define BOARD_UART_PIN_TX 0 -#define BOARD_UART_PIN_RX 1 - -//--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF -//--------------------------------------------------------------------+ -static const uint8_t ledports[] = {6, 6, 6, 6, 6, 4, 4, 4}; -static const uint8_t ledbits[] = {24, 25, 26, 27, 28, 12, 13, 14}; - -const static struct { - uint8_t port; - uint8_t pin; -}leds[BOARD_MAX_LEDS] = { - {6, 24}, {6, 25}, {6, 26}, {6, 27}, - {4, 28}, {4, 12}, {4, 13}, {4, 14}}; - -//--------------------------------------------------------------------+ -// INTERNAL OBJECT & FUNCTION DECLARATION -//--------------------------------------------------------------------+ - -//--------------------------------------------------------------------+ -// IMPLEMENTATION -//--------------------------------------------------------------------+ -void board_init(void) -{ - CGU_Init(); - SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer - - //------------- USB Bus power HOST ONLY-------------// - // Keil VBUS0 is P6_3 - scu_pinmux(0x6, 3, MD_PUP | MD_EZI, FUNC1); // P6_3 USB0_PWR_EN, USB0 VBus function - - // Keil VBUS1 is P9_5 - scu_pinmux(0x9, 5, MD_PUP | MD_EZI, FUNC2); // P9_5 USB1_PWR_EN, USB1 VBus function - - //------------- LEDs init, J21 must be installed -------------// - LPC_SCU->SFSPD_10 = 4; // GPIO6[24] - LPC_SCU->SFSPD_11 = 4; // GPIO6[25] - LPC_SCU->SFSPD_12 = 4; // GPIO6[26] - LPC_SCU->SFSPD_13 = 4; // GPIO6[27] - LPC_SCU->SFSPD_14 = 4; // GPIO6[28] - LPC_SCU->SFSP9_0 = 0; // GPIO4[12] - LPC_SCU->SFSP9_1 = 0; // GPIO4[13] - LPC_SCU->SFSP9_2 = 0; // GPIO4[14] - - for(uint32_t i=0; i<BOARD_MAX_LEDS; i++) - { - GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output - } - - //------------- UART init -------------// - #if CFG_UART_ENABLE - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN , FUNC1); - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE; - UARTConfigStruct.Clock_Speed = 0; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit - #endif - -} - -//--------------------------------------------------------------------+ -// LEDS -//--------------------------------------------------------------------+ -void board_leds(uint32_t on_mask, uint32_t off_mask) -{ - for (uint32_t i=0; i<BOARD_MAX_LEDS; i++) - { - if ( on_mask & BIT_(i)) - { - GPIO_SetValue(leds[i].port, BIT_(leds[i].pin)); - }else if ( off_mask & BIT_(i)) // on_mask take precedence over off_mask - { - GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin)); - } - } -} - -//--------------------------------------------------------------------+ -// UART -//--------------------------------------------------------------------+ -#if CFG_UART_ENABLE -uint32_t board_uart_send(uint8_t *buffer, uint32_t length) -{ - return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING); -} - -uint32_t board_uart_recv(uint8_t *buffer, uint32_t length) -{ - return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING); -} -#endif - -#endif diff --git a/demos/bsp/boards/keil/board_mcb4300.h b/demos/bsp/boards/keil/board_mcb4300.h deleted file mode 100644 index e0c5526af..000000000 --- a/demos/bsp/boards/keil/board_mcb4300.h +++ /dev/null @@ -1,68 +0,0 @@ -/**************************************************************************/ -/*! - @file board_mcb4300.h - @author hathach (tinyusb.org) - - @section LICENSE - - Software License Agreement (BSD License) - - Copyright (c) 2013, hathach (tinyusb.org) - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - 3. Neither the name of the copyright holders nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY - DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - This file is part of the tinyusb stack. -*/ -/**************************************************************************/ - -/** \ingroup TBD - * \defgroup TBD - * \brief TBD - * - * @{ - */ - -#ifndef _TUSB_BOARD_MCB4300_H_ -#define _TUSB_BOARD_MCB4300_H_ - -#include "LPC43xx.h" -#include "lpc43xx_scu.h" -#include "lpc43xx_cgu.h" -#include "lpc43xx_gpio.h" -#include "lpc43xx_uart.h" - -#ifdef __cplusplus - extern "C" { -#endif - -#define CFG_PRINTF_TARGET PRINTF_TARGET_SEMIHOST - - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_BOARD_MCB4300_H_ */ - -/** @} */ diff --git a/demos/bsp/boards/lpcxpresso/board_lpclink2.c b/demos/bsp/boards/lpcxpresso/board_lpclink2.c deleted file mode 100644 index 8792ee933..000000000 --- a/demos/bsp/boards/lpcxpresso/board_lpclink2.c +++ /dev/null @@ -1,126 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_lpclink2.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "../board.h"
-
-#if BOARD == BOARD_LPCLINK2
-
-#define BOARD_UART_PORT LPC_USART0
-#define BOARD_UART_PIN_PORT 0x0f
-#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
-#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD
-
-#define BOARD_MAX_LEDS 1
-
-const static struct {
- uint8_t port;
- uint8_t pin;
-}leds[BOARD_MAX_LEDS] = { {0, 8} };
-
-void board_init(void)
-{
- CGU_Init();
-
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
- SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
-#endif
-
- //------------- USB -------------//
-
-
- //------------- LED -------------//
- for (uint8_t i=0; i<BOARD_MAX_LEDS; i++)
- {
- scu_pinmux(leds[i].port, leds[i].pin, MD_PUP|MD_EZI|MD_ZI, FUNC0);
- GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
- }
-
-
-#if CFG_UART_ENABLE
- //------------- UART -------------//
- scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1);
- scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1);
-
- UART_CFG_Type UARTConfigStruct;
- UART_ConfigStructInit(&UARTConfigStruct);
- UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
- UARTConfigStruct.Clock_Speed = 0;
-
- UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
- UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
-#endif
-}
-
-//--------------------------------------------------------------------+
-// LEDS
-//--------------------------------------------------------------------+
-void board_leds(uint32_t on_mask, uint32_t off_mask)
-{
- for (uint32_t i=0; i<BOARD_MAX_LEDS; i++)
- {
- if ( on_mask & BIT_(i))
- {
- GPIO_SetValue(leds[i].port, BIT_(leds[i].pin));
- }else if ( off_mask & BIT_(i)) // on_mask take precedence over off_mask
- {
- GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin));
- }
- }
-}
-
-//--------------------------------------------------------------------+
-// UART
-//--------------------------------------------------------------------+
-#if CFG_UART_ENABLE
-uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
-{
- return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
-}
-
-uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
-{
- return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
-}
-
-uint8_t board_uart_getchar(void)
-{
- return UART_ReceiveByte(BOARD_UART_PORT);
-}
-#endif
-
-#endif
diff --git a/demos/bsp/boards/lpcxpresso/board_lpclink2.h b/demos/bsp/boards/lpcxpresso/board_lpclink2.h deleted file mode 100644 index 7c947cbdf..000000000 --- a/demos/bsp/boards/lpcxpresso/board_lpclink2.h +++ /dev/null @@ -1,68 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_lpclink2.h
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-/** \ingroup TBD
- * \defgroup TBD
- * \brief TBD
- *
- * @{
- */
-
-#ifndef _TUSB_BOARD_LPCLINK2_H_
-#define _TUSB_BOARD_LPCLINK2_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include "LPC43xx.h"
-#include "lpc43xx_scu.h"
-#include "lpc43xx_cgu.h"a
-#include "lpc43xx_gpio.h"
-#include "lpc43xx_uart.h"
-#include "lpc43xx_i2c.h"
-
-#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_BOARD_LPCLINK2_H_ */
-
-/** @} */
diff --git a/demos/bsp/boards/lpcxpresso/board_lpcxpresso1347.c b/demos/bsp/boards/lpcxpresso/board_lpcxpresso1347.c deleted file mode 100644 index 816e1c951..000000000 --- a/demos/bsp/boards/lpcxpresso/board_lpcxpresso1347.c +++ /dev/null @@ -1,133 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_lpcexpresso1347.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "../board.h"
-
-#if BOARD == BOARD_LPCXPRESSO1347
-
-#define LED_PORT (0)
-#define LED_PIN (7)
-#define LED_ON (1)
-#define LED_OFF (0)
-
-const static struct {
- uint8_t port;
- uint8_t pin;
-} buttons[] =
-{
- {1, 22 }, // Joystick up
- {1, 20 }, // Joystick down
- {1, 23 }, // Joystick left
- {1, 21 }, // Joystick right
- {1, 19 }, // Joystick press
- {0, 1 }, // SW3
-// {1, 4 }, // SW4 (require to remove J28)
-};
-
-enum {
- BOARD_BUTTON_COUNT = sizeof(buttons) / sizeof(buttons[0])
-};
-
-
-void board_init(void)
-{
- SystemInit();
-
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
- SysTick_Config(SystemCoreClock / CFG_TICKS_PER_SECOND); // 1 msec tick timer
-#endif
-
- GPIOInit();
-
- //------------- LED -------------//
- GPIOSetDir(LED_PORT, LED_PIN, 1);
- LPC_GPIO->CLR[LED_PORT] = (1 << LED_PIN);
-
- //------------- BUTTON -------------//
- for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) GPIOSetDir(buttons[i].port, BIT_(buttons[i].pin), 0);
-
- //------------- UART -------------//
- UARTInit(CFG_UART_BAUDRATE);
-
-}
-
-//--------------------------------------------------------------------+
-// LEDS
-//--------------------------------------------------------------------+
-void board_leds(uint32_t on_mask, uint32_t off_mask)
-{
- if (on_mask & BIT_(0))
- {
- GPIOSetBitValue(LED_PORT, LED_PIN, LED_ON);
- }else if (off_mask & BIT_(0))
- {
- GPIOSetBitValue(LED_PORT, LED_PIN, LED_OFF);
- }
-}
-
-//--------------------------------------------------------------------+
-// BUTTONS
-//--------------------------------------------------------------------+
-static bool button_read(uint8_t id)
-{
- return !GPIOGetPinValue(buttons[id].port, buttons[id].pin); // button is active low
-}
-
-uint32_t board_buttons(void)
-{
- uint32_t result = 0;
-
- for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) result |= (button_read(i) ? BIT_(i) : 0);
-
- return result;
-}
-
-//--------------------------------------------------------------------+
-// UART
-//--------------------------------------------------------------------+
-void board_uart_putchar(uint8_t c)
-{
- UARTSend(&c, 1);
-}
-
-uint8_t board_uart_getchar(void)
-{
- return 0;
-}
-
-#endif
diff --git a/demos/bsp/boards/lpcxpresso/board_lpcxpresso1347.h b/demos/bsp/boards/lpcxpresso/board_lpcxpresso1347.h deleted file mode 100644 index 8e59bc970..000000000 --- a/demos/bsp/boards/lpcxpresso/board_lpcxpresso1347.h +++ /dev/null @@ -1,65 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_lpcxpresso1347.h
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-/** \ingroup TBD
- * \defgroup TBD
- * \brief TBD
- *
- * @{
- */
-
-#ifndef _TUSB_BOARD_LPCXPRESSO1347_H_
-#define _TUSB_BOARD_LPCXPRESSO1347_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include "LPC13Uxx.h"
-#include "lpc13uxx/LPC13Uxx_DriverLib/inc/gpio.h"
-#include "lpc13uxx/LPC13Uxx_DriverLib/inc/uart.h"
-
-#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_BOARD_LPCXPRESSO1347_H_ */
-
-/** @} */
diff --git a/demos/bsp/boards/lpcxpresso/board_lpcxpresso1769.c b/demos/bsp/boards/lpcxpresso/board_lpcxpresso1769.c deleted file mode 100644 index 238559d8e..000000000 --- a/demos/bsp/boards/lpcxpresso/board_lpcxpresso1769.c +++ /dev/null @@ -1,159 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_lpcxpresso1769.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "../board.h"
-
-#if BOARD == BOARD_LPCXPRESSO1769
-
-#define BOARD_LED_PORT (0)
-#define BOARD_LED_PIN (22)
-
-const static struct {
- uint8_t port;
- uint8_t pin;
-} buttons[] =
-{
- {2, 3 }, // Joystick up
- {0, 15 }, // Joystick down
- {2, 4 }, // Joystick left
- {0, 16 }, // Joystick right
- {0, 17 }, // Joystick press
- {0, 4 }, // SW3
-// {1, 31 }, // SW4 (require to remove J28)
-};
-
-enum {
- BOARD_BUTTON_COUNT = sizeof(buttons) / sizeof(buttons[0])
-};
-
-#define BOARD_UART_PORT LPC_UART3
-
-void board_init(void)
-{
- SystemInit();
-
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
- SysTick_Config(SystemCoreClock / CFG_TICKS_PER_SECOND); // 1 msec tick timer
-#endif
-
- //------------- LED -------------//
- GPIO_SetDir(BOARD_LED_PORT, BIT_(BOARD_LED_PIN), 1);
-
- //------------- BUTTON -------------//
- for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) GPIO_SetDir(buttons[i].port, BIT_(buttons[i].pin), 0);
-
-#if MODE_DEVICE_SUPPORTED
- //------------- USB Device -------------//
- // VBUS sense is wrongly connected to P0_5 (instead of P1_30). So we need to always pull P1_30 to high
- // so that USB device block can work. However, Device Controller (thus tinyusb) cannot able to determine
- // if device is disconnected or not
- PINSEL_ConfigPin( &(PINSEL_CFG_Type) {
- .Portnum = 1, .Pinnum = 30,
- .Funcnum = 2, .Pinmode = PINSEL_PINMODE_PULLUP} );
-
- //P0_21 instead of P2_9 as USB connect
-#endif
-
- //------------- UART -------------//
- PINSEL_CFG_Type PinCfg =
- {
- .Portnum = 0,
- .Pinnum = 0, // TXD is P0.0
- .Funcnum = 2,
- .OpenDrain = 0,
- .Pinmode = 0
- };
- PINSEL_ConfigPin(&PinCfg);
-
- PinCfg.Portnum = 0;
- PinCfg.Pinnum = 1; // RXD is P0.1
- PINSEL_ConfigPin(&PinCfg);
-
- UART_CFG_Type UARTConfigStruct;
- UART_ConfigStructInit(&UARTConfigStruct);
- UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
-
- UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
- UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
-}
-
-//--------------------------------------------------------------------+
-// LEDS
-//--------------------------------------------------------------------+
-void board_leds(uint32_t on_mask, uint32_t off_mask)
-{
- if (on_mask & BIT_(0))
- {
- GPIO_SetValue(BOARD_LED_PORT, BIT_(BOARD_LED_PIN));
- }else if (off_mask & BIT_(0))
- {
- GPIO_ClearValue(BOARD_LED_PORT, BIT_(BOARD_LED_PIN));
- }
-}
-
-//--------------------------------------------------------------------+
-// BUTTONS
-//--------------------------------------------------------------------+
-static bool button_read(uint8_t id)
-{
- return !BIT_TEST_( GPIO_ReadValue(buttons[id].port), buttons[id].pin ); // button is active low
-}
-
-uint32_t board_buttons(void)
-{
- uint32_t result = 0;
-
- for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) result |= (button_read(i) ? BIT_(i) : 0);
-
- return result;
-}
-
-//--------------------------------------------------------------------+
-// UART
-//--------------------------------------------------------------------+
-void board_uart_putchar(uint8_t c)
-{
- UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING);
-}
-
-uint8_t board_uart_getchar(void)
-{
- return UART_ReceiveByte(BOARD_UART_PORT);
-}
-
-#endif
diff --git a/demos/bsp/boards/lpcxpresso/board_lpcxpresso1769.h b/demos/bsp/boards/lpcxpresso/board_lpcxpresso1769.h deleted file mode 100644 index b9475c7f3..000000000 --- a/demos/bsp/boards/lpcxpresso/board_lpcxpresso1769.h +++ /dev/null @@ -1,70 +0,0 @@ -/**************************************************************************/ -/*! - @file board_lpcxpresso1769.h - @author hathach (tinyusb.org) - - @section LICENSE - - Software License Agreement (BSD License) - - Copyright (c) 2013, hathach (tinyusb.org) - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - 3. Neither the name of the copyright holders nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY - DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - This file is part of the tinyusb stack. -*/ -/**************************************************************************/ - -/** \ingroup TBD - * \defgroup TBD - * \brief TBD - * - * @{ - */ - -#ifndef _TUSB_BOARD_LPCXPRESSO1769_H_ -#define _TUSB_BOARD_LPCXPRESSO1769_H_ - -#include "LPC17xx.h" - -#include "lpc175x_6x/LPC17xx_DriverLib/include/lpc17xx_clkpwr.h" -#include "lpc175x_6x/LPC17xx_DriverLib/include/lpc17xx_pinsel.h" -#include "lpc175x_6x/LPC17xx_DriverLib/include/lpc17xx_gpio.h" -#include "lpc175x_6x/LPC17xx_DriverLib/include/lpc17xx_uart.h" - -#ifdef __cplusplus - extern "C" { -#endif - -#define CFG_PRINTF_TARGET PRINTF_TARGET_UART -//#define CFG_PRINTF_TARGET PRINTF_TARGET_SWO - - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_BOARD_LPCXPRESSO1769_H_ */ - -/** @} */ diff --git a/demos/bsp/boards/microbuilder/board_lpc4357usb.c b/demos/bsp/boards/microbuilder/board_lpc4357usb.c deleted file mode 100644 index 35d800956..000000000 --- a/demos/bsp/boards/microbuilder/board_lpc4357usb.c +++ /dev/null @@ -1,130 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_lpc4357usb.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "../board.h"
-
-#if BOARD == BOARD_LPC4357USB
-
-#define BOARD_UART_PORT (LPC_USART0)
-#define BOARD_UART_PIN_PORT (0x0F)
-#define BOARD_UART_PIN_TX (10) // PF.10 : UART0_TXD
-#define BOARD_UART_PIN_RX (11) // PF.11 : UART0_RXD
-
-#define BOARD_LED0_PORT (0x0C)
-#define BOARD_LED0_PIN (2) // PC.2 = User LED
-#define BOARD_LED0_FUNCTION (4) // GPIO multiplexed as function 4 on PC.2
-#define BOARD_LED0_GPIO_PORT (6)
-#define BOARD_LED0_GPIO_PIN (1) // PC.2 = GPIO 6[1]
-
-void board_init(void)
-{
- CGU_Init();
-
- /* Setup the systick time for 1ms ticks */
- SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND);
-
- /* Configure LED0 as GPIO */
- scu_pinmux(BOARD_LED0_PORT, BOARD_LED0_PIN, MD_PDN, BOARD_LED0_FUNCTION);
- GPIO_SetDir(BOARD_LED0_GPIO_PORT, (1 << BOARD_LED0_GPIO_PIN), 1);
-
- /* Configure TRACE pins */
- scu_pinmux(0xF, 4, MD_PDN, 0x2); /* PF_4 = TRACECLK */
- scu_pinmux(0x7, 4, MD_PDN, 0x5); /* P7_4 = TRACEDATA[0] */
- scu_pinmux(0x7, 5, MD_PDN, 0x5); /* P7_5 = TRACEDATA[1] */
- scu_pinmux(0x7, 6, MD_PDN, 0x5); /* P7_6 = TRACEDATA[2] */
- scu_pinmux(0x7, 7, MD_PDN, 0x5); /* P7_7 = TRACEDATA[3] */
-
- // USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
- scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7); // USB0 VBus Power
-
- // 1.5Kohm pull-up resistor is needed on the USB DP data signal. GPIO28 (base), P9_5 (LPC4357) controls
- //scu_pinmux(0x9, 5, MD_PUP|MD_EZI|MD_ZI, FUNC4); // GPIO5[18]
- //GPIO_SetDir(5, BIT_(18), 1); // output
- //GPIO_ClearValue(5, BIT_(18));
-
- /* Init I2C @ 400kHz */
- I2C_Init(LPC_I2C0, 400000);
- I2C_Cmd(LPC_I2C0, ENABLE);
-
-#if CFG_UART_ENABLE
- //------------- UART init -------------//
- scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN , FUNC1);
- scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
-
- UART_CFG_Type UARTConfigStruct;
- UART_ConfigStructInit(&UARTConfigStruct);
- UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
- UARTConfigStruct.Clock_Speed = 0;
-
- UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
- UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
-#endif
-}
-
-//--------------------------------------------------------------------+
-// LEDS
-//--------------------------------------------------------------------+
-void board_leds(uint32_t on_mask, uint32_t off_mask)
-{
- if (on_mask & 0x01)
- {
- LPC_GPIO_PORT->SET[BOARD_LED0_GPIO_PORT] = (1 << BOARD_LED0_GPIO_PIN);
- }
-
- if (off_mask & 0x01)
- {
- LPC_GPIO_PORT->CLR[BOARD_LED0_GPIO_PORT] = (1 << BOARD_LED0_GPIO_PIN);
- }
-}
-
-//--------------------------------------------------------------------+
-// UART
-//--------------------------------------------------------------------+
-#if CFG_UART_ENABLE
-uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
-{
- return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
-}
-
-uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
-{
- return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
-}
-#endif
-
-#endif
diff --git a/demos/bsp/boards/microbuilder/board_lpc4357usb.h b/demos/bsp/boards/microbuilder/board_lpc4357usb.h deleted file mode 100644 index 96d535c7c..000000000 --- a/demos/bsp/boards/microbuilder/board_lpc4357usb.h +++ /dev/null @@ -1,75 +0,0 @@ -/**************************************************************************/ -/*! - @file board_lpc4357usb.h - @author hathach (tinyusb.org) - - @section LICENSE - - Software License Agreement (BSD License) - - Copyright (c) 2013, hathach (tinyusb.org) - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - 3. Neither the name of the copyright holders nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY - DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND - ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - This file is part of the tinyusb stack. -*/ -/**************************************************************************/ - -/** \file - * \brief TBD - * - * \note TBD - */ - -/** \ingroup TBD - * \defgroup TBD - * \brief TBD - * - * @{ - */ - -#ifndef _TUSB_BOARD_LPC4357USB_H_ -#define _TUSB_BOARD_LPC4357USB_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#include "LPC43xx.h" -#include "lpc43xx_scu.h" -#include "lpc43xx_cgu.h" -#include "lpc43xx_gpio.h" -#include "lpc43xx_uart.h" -#include "lpc43xx_i2c.h" - -#define CFG_PRINTF_TARGET PRINTF_TARGET_SWO -//#define CFG_PRINTF_TARGET PRINTF_TARGET_UART - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_BOARD_LPC4357USB_H_ */ - -/** @} */ diff --git a/demos/bsp/boards/microbuilder/board_lpc4357usb_etminit.ini b/demos/bsp/boards/microbuilder/board_lpc4357usb_etminit.ini deleted file mode 100644 index 67aed412e..000000000 --- a/demos/bsp/boards/microbuilder/board_lpc4357usb_etminit.ini +++ /dev/null @@ -1,31 +0,0 @@ -/*------------------------------------------------------------------- -** Define the function to enable the trace port -**-----------------------------------------------------------------*/ -FUNC void EnableTPIU(void) { - - /* Configure TRACE pins for MCB4357 */ - //_WDWORD(0x40086790, 0x000000B2); // LPC_SCU->SFSPF_4 = 2; - //_WDWORD(0x40086794, 0x000000B3); // LPC_SCU->SFSPF_5 = 3; - //_WDWORD(0x40086798, 0x000000B3); // LPC_SCU->SFSPF_6 = 3; - //_WDWORD(0x4008679C, 0x000000B3); // LPC_SCU->SFSPF_7 = 3; - //_WDWORD(0x400867A0, 0x000000B3); // LPC_SCU->SFSPF_8 = 3; - - /* Configure TRACE pins for LPC4357USB */ - _WDWORD(0x40086790, 0x000000B2); // LPC_SCU->SFSPF_4 = 2 - TRACECLK - _WDWORD(0x40086390, 0x000000B5); // LPC_SCU->SFSP7_4 = 5 - TRACEDATA[0] - _WDWORD(0x40086394, 0x000000B5); // LPC_SCU->SFSP7_5 = 5 - TRACEDATA[1] - _WDWORD(0x40086398, 0x000000B5); // LPC_SCU->SFSP7_6 = 5 - TRACEDATA[2] - _WDWORD(0x4008639C, 0x000000B5); // LPC_SCU->SFSP7_7 = 5 - TRACEDATA[3] -} - -/*------------------------------------------------------------------- -** Invoke the function at debugger startup -**-----------------------------------------------------------------*/ -EnableTPIU(); - -/*------------------------------------------------------------------- -** Execute upon software RESET -**-----------------------------------------------------------------*/ -FUNC void OnResetExec(void) { - EnableTPIU(); -} diff --git a/demos/bsp/boards/microbuilder/board_rf1ghznode.c b/demos/bsp/boards/microbuilder/board_rf1ghznode.c deleted file mode 100644 index 9560472cb..000000000 --- a/demos/bsp/boards/microbuilder/board_rf1ghznode.c +++ /dev/null @@ -1,115 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_rf1ghznode.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "../board.h"
-
-#if BOARD == BOARD_RF1GHZNODE
-
-#define LED_PORT (1)
-#define LED_PIN (31)
-#define LED_ON (0)
-#define LED_OFF (1)
-
-const static struct {
- uint8_t port;
- uint8_t pin;
-} buttons[] = { { 0, 1 } };
-
-enum {
- BOARD_BUTTON_COUNT = sizeof(buttons) / sizeof(buttons[0])
-};
-
-void board_init(void)
-{
- SystemInit();
-
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
- SysTick_Config(SystemCoreClock / CFG_TICKS_PER_SECOND); // 1 msec tick timer
-#endif
-
- GPIOInit();
-
- //------------- LED -------------//
- GPIOSetDir(LED_PORT, LED_PIN, 1);
- board_leds(0x01, 0); // turn off the led first
-
- //------------- BUTTON -------------//
- for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) GPIOSetDir(buttons[i].port, buttons[i].pin, 0);
-
- //------------- UART -------------//
- UARTInit(CFG_UART_BAUDRATE);
-}
-
-//--------------------------------------------------------------------+
-// LEDS
-//--------------------------------------------------------------------+
-void board_leds(uint32_t on_mask, uint32_t off_mask)
-{
- if (on_mask & BIT_(0))
- {
- GPIOSetBitValue(LED_PORT, LED_PIN, LED_ON);
- }else if (off_mask & BIT_(0))
- {
- GPIOSetBitValue(LED_PORT, LED_PIN, LED_OFF);
- }
-}
-
-//--------------------------------------------------------------------+
-// Buttons
-//--------------------------------------------------------------------+
-uint32_t board_buttons(void)
-{
-// for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) GPIOGetPinValue(buttons[i].port, buttons[i].pin);
- return GPIOGetPinValue(buttons[0].port, buttons[0].pin) ? 0 : 1; // button is active low
-}
-
-//--------------------------------------------------------------------+
-// UART
-//--------------------------------------------------------------------+
-void board_uart_putchar(uint8_t c)
-{
- UARTSend(&c, 1);
-}
-
-uint8_t board_uart_getchar(void)
-{
-// *buffer = get_key(); TODO cannot find available code for uart getchar
- return 0;
-}
-
-#endif
diff --git a/demos/bsp/boards/microbuilder/board_rf1ghznode.h b/demos/bsp/boards/microbuilder/board_rf1ghznode.h deleted file mode 100644 index f73c49101..000000000 --- a/demos/bsp/boards/microbuilder/board_rf1ghznode.h +++ /dev/null @@ -1,66 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_rf1ghznode.h
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-/** \ingroup TBD
- * \defgroup TBD
- * \brief TBD
- *
- * @{
- */
-
-#ifndef _TUSB_BOARD_RF1GHZNODE_H_
-#define _TUSB_BOARD_RF1GHZNODE_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include "LPC11Uxx.h"
-#include "lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.h"
-#include "lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.h"
-
-//#define CFG_PRINTF_TARGET PRINTF_TARGET_SEMIHOST
-#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_BOARD_RF1GHZNODE_H_ */
-
-/** @} */
diff --git a/demos/bsp/boards/ngx/board_ngx4330.c b/demos/bsp/boards/ngx/board_ngx4330.c deleted file mode 100644 index 0709db2f9..000000000 --- a/demos/bsp/boards/ngx/board_ngx4330.c +++ /dev/null @@ -1,158 +0,0 @@ -/**************************************************************************/
-/*!
- @file board_ngx4330.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "../board.h"
-
-#if BOARD == BOARD_NGX4330
-
-#define BOARD_UART_PORT LPC_USART0
-
-const static struct {
- uint8_t mux_port;
- uint8_t mux_pin;
-
- uint8_t gpio_port;
- uint8_t gpio_pin;
-}leds[] = { {2, 11, 1, 11}, {2, 12, 1,12} };
-
-enum {
- BOARD_MAX_LEDS = sizeof(leds) / sizeof(leds[0])
-};
-
-const static struct {
- uint8_t mux_port;
- uint8_t mux_pin;
-
- uint8_t gpio_port;
- uint8_t gpio_pin;
-}buttons[] = { {0x02, 7, 0, 7 } };
-
-enum {
- BOARD_BUTTON_COUNT = sizeof(buttons) / sizeof(buttons[0])
-};
-
-void board_init(void)
-{
- CGU_Init();
-
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
- SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/CFG_TICKS_PER_SECOND ); /* 1 ms Timer */
-#endif
-
- //------------- USB Bus power HOST ONLY-------------//
- scu_pinmux(0x1, 7, MD_PUP | MD_EZI, FUNC4); // P1_7 USB0_PWR_EN, USB0 VBus function Xplorer
-
- scu_pinmux(0x2, 6, MD_PUP | MD_EZI, FUNC4); // P2_6 is configured as GPIO5[6] for USB1_PWR_EN
- GPIO_SetDir (5, BIT_(6), 1); // GPIO5[6] is output
- GPIO_SetValue (5, BIT_(6)); // GPIO5[6] output high
-
- //------------- LED -------------//
- for (uint8_t i=0; i<BOARD_MAX_LEDS; i++)
- {
- scu_pinmux(leds[i].mux_port, leds[i].mux_pin, MD_PUP|MD_EZI|MD_ZI, FUNC0);
- GPIO_SetDir(leds[i].gpio_port, BIT_(leds[i].gpio_pin), 1); // output
- }
-
- //------------- BUTTONS -------------//
- for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++)
- {
- scu_pinmux(buttons[i].mux_port, buttons[i].mux_pin, GPIO_NOPULL, FUNC0);
- GPIO_SetDir(buttons[i].gpio_port, BIT_(buttons[i].gpio_pin), 0);
- }
-
- //------------- UART init -------------//
- scu_pinmux(0x6 ,4, MD_PDN | MD_EZI, FUNC2); // UART0_TXD
- scu_pinmux(0x6 ,5, MD_PDN | MD_EZI, FUNC2); // UART0_RXD
-
- UART_CFG_Type UARTConfigStruct;
- UART_ConfigStructInit(&UARTConfigStruct); // default: baud = 9600, 8 bit data, 1 stop bit, no parity
- UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE; // Re-configure baudrate
- UARTConfigStruct.Clock_Speed = 0;
-
- UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
- UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART
-}
-
-//--------------------------------------------------------------------+
-// LEDS
-//--------------------------------------------------------------------+
-void board_leds(uint32_t on_mask, uint32_t off_mask)
-{
- for (uint32_t i=0; i<BOARD_MAX_LEDS; i++)
- {
- if ( on_mask & BIT_(i))
- {
- GPIO_SetValue(leds[i].gpio_port, BIT_(leds[i].gpio_pin));
- }else if ( off_mask & BIT_(i)) // on_mask take precedence over off_mask
- {
- GPIO_ClearValue(leds[i].gpio_port, BIT_(leds[i].gpio_pin));
- }
- }
-}
-
-//--------------------------------------------------------------------+
-// BUTTONS
-//--------------------------------------------------------------------+
-static bool button_read(uint8_t id)
-{
- return !BIT_TEST_( GPIO_ReadValue(buttons[id].gpio_port), buttons[id].gpio_pin ); // button is active low
-}
-
-uint32_t board_buttons(void)
-{
- uint32_t result = 0;
-
- for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) result |= (button_read(i) ? BIT_(i) : 0);
-
- return result;
-}
-
-//--------------------------------------------------------------------+
-// UART
-//--------------------------------------------------------------------+
-uint8_t board_uart_getchar(void)
-{
- return UART_ReceiveByte(BOARD_UART_PORT);
-}
-
-void board_uart_putchar(uint8_t c)
-{
- UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING);
-}
-
-#endif
diff --git a/demos/bsp/boards/ngx/board_ngx4330.h b/demos/bsp/boards/ngx/board_ngx4330.h deleted file mode 100644 index 3ac30ecb8..000000000 --- a/demos/bsp/boards/ngx/board_ngx4330.h +++ /dev/null @@ -1,67 +0,0 @@ -/**************************************************************************/ -/*! - @file board_ngx4330.h - @author hathach (tinyusb.org) - - @section LICENSE - - Software License Agreement (BSD License) - - Copyright (c) 2013, hathach (tinyusb.org) - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - 3. Neither the name of the copyright holders nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY - DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - This file is part of the tinyusb stack. -*/ -/**************************************************************************/ - -/** \ingroup TBD - * \defgroup TBD - * \brief TBD - * - * @{ - */ - -#ifndef _TUSB_BOARD_NGX4330_H_ -#define _TUSB_BOARD_NGX4330_H_ - -#include "LPC43xx.h" -#include "lpc43xx_scu.h" -#include "lpc43xx_cgu.h" -#include "lpc43xx_gpio.h" -#include "lpc43xx_uart.h" - -#ifdef __cplusplus - extern "C" { -#endif - -#define CFG_PRINTF_TARGET PRINTF_TARGET_UART - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_BOARD_NGX4330_H_ */ - -/** @} */ diff --git a/demos/bsp/boards/printf_retarget.c b/demos/bsp/boards/printf_retarget.c deleted file mode 100644 index ee95f25ef..000000000 --- a/demos/bsp/boards/printf_retarget.c +++ /dev/null @@ -1,163 +0,0 @@ -/**************************************************************************/
-/*!
- @file printf_retarget.c
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "board.h"
-
-#if CFG_PRINTF_TARGET != PRINTF_TARGET_SEMIHOST
-
-#if CFG_PRINTF_TARGET == PRINTF_TARGET_UART
- #define retarget_getchar() board_uart_getchar()
- #define retarget_putchar(c) board_uart_putchar(c);
-#elif CFG_PRINTF_TARGET == PRINTF_TARGET_SWO
- volatile int32_t ITM_RxBuffer; // keil variable to read from SWO
- #define retarget_getchar() ITM_ReceiveChar()
- #define retarget_putchar(c) ITM_SendChar(c)
-#else
- #error Target is not implemented yet
-#endif
-
-//--------------------------------------------------------------------+
-// LPCXPRESSO / RED SUITE
-//--------------------------------------------------------------------+
-#if defined __CODE_RED
-
-#if CFG_PRINTF_TARGET == PRINTF_TARGET_SWO
- #error author does not know how to retarget SWO with lpcxpresso/red-suite
-#endif
-
-// Called by bottom level of printf routine within RedLib C library to write
-// a character. With the default semihosting stub, this would write the character
-// to the debugger console window . But this version writes
-// the character to the UART.
-int __sys_write (int iFileHandle, char *buf, int length)
-{
- (void) iFileHandle;
-
- for (int i=0; i<length; i++)
- {
- if (buf[i] == '\n') retarget_putchar('\r');
-
- retarget_putchar( buf[i] );
- }
-
- return length;
-}
-
-// Called by bottom level of scanf routine within RedLib C library to read
-// a character. With the default semihosting stub, this would read the character
-// from the debugger console window (which acts as stdin). But this version reads
-// the character from the UART.
-int __sys_readc (void)
-{
- return (int) retarget_getchar();
-}
-
-//--------------------------------------------------------------------+
-// KEIL
-//--------------------------------------------------------------------+
-#elif defined __CC_ARM // keil
-
-struct __FILE {
- uint32_t handle;
-};
-
-void _ttywrch(int ch)
-{
- if ( ch == '\n' ) retarget_putchar('\r');
-
- retarget_putchar(ch);
-}
-
-int fgetc(FILE *f)
-{
- return retarget_getchar();
-}
-
-int fputc(int ch, FILE *f)
-{
- _ttywrch(ch);
- return ch;
-}
-
-//--------------------------------------------------------------------+
-// IAR
-//--------------------------------------------------------------------+
-#elif defined __ICCARM__ // TODO could not able to retarget to UART with IAR
-
-#if CFG_PRINTF_TARGET == PRINTF_TARGET_UART
-#include <stddef.h>
-
-size_t __write(int handle, const unsigned char *buf, size_t length)
-{
- /* Check for the command to flush all handles */
- if (handle == -1) return 0;
-
- /* Check for stdout and stderr (only necessary if FILE descriptors are enabled.) */
- if (handle != 1 && handle != 2) return -1;
-
- for (size_t i=0; i<length; i++)
- {
- if (buf[i] == '\n') retarget_putchar('\r');
-
- retarget_putchar( buf[i] );
- }
-
- return length;
-}
-
-size_t __read(int handle, unsigned char *buf, size_t bufSize)
-{
- /* Check for stdin (only necessary if FILE descriptors are enabled) */
- if (handle != 0) return -1;
-
- size_t i;
- for (i=0; i<bufSize; i++)
- {
- uint8_t ch = board_uart_getchar();
- if (ch == 0) break;
- buf[i] = ch;
- }
-
- return i;
-}
-
-#endif
-
-#endif
-
-#endif // CFG_PRINTF_TARGET != PRINTF_TARGET_SEMIHOST
|