diff options
| author | Ha Thach <[email protected]> | 2026-06-11 10:17:28 +0700 |
|---|---|---|
| committer | GitHub <[email protected]> | 2026-06-11 10:17:28 +0700 |
| commit | dffc57135846a4b00aca06b2f588daa6d13b67ef (patch) | |
| tree | dd8a91ac8368add6cb7616a33d38d34ed45d38a3 /docs/conf.py | |
| parent | 6f35e76667f4015ef429ace5730e20cc0037e042 (diff) | |
Fix stm32f723disco host/cdc_msc_hid HIL: UART RX starvation + DWC2 DMA split-IN NAK storm (#3677)
Fix stm32f723disco host HIL: UART RX starvation + DWC2 split bulk NAK/XactErr handling (#3677)
stm32f7 BSP — UART RX starvation
- The host console USART shared interrupt priority with the USB OTG ISR, so a long
OTG interrupt could starve RXNE and drop received bytes. Raise the USART RX IRQ
above OTG_FS/OTG_HS in both the bare-metal and FreeRTOS init paths, guarded by
#ifdef UART_ID so boards without a UART console keep the default OTG priority.
dwc2 host — split NAK/XactErr handling
- Slave mode: a persistently-NAKing split bulk/control IN poll re-armed the
start-split immediately, storming the ISR and starving task context. Throttle by
disabling the channel and re-arming on the resulting halt (no frame deferral).
- Buffer-DMA mode: a pure split bulk-OUT NAK was unhandled, leaving the channel
halted and stalling the transfer — the dominant cause of CDC echo truncation.
Handle it by rewinding the buffer pointers and retrying the start-split
(Programming Guide v4.20a 5.1.4.2).
- Buffer-DMA mode: a split bulk-OUT XactErr was retried immediately, exhausting
HCD_XFER_ERROR_MAX before the transient cleared. Throttle via channel_disable +
re-arm to give the hub TT a recovery gap, mirroring slave mode.
- All three are scoped to split transfers (hcsplt.split_en); non-split NAK/XactErr
keep the core-handled / immediate-retry behavior. The OUT XactErr throttle also
excludes periodic split, where channel_disable() is a no-op and would wedge the
channel. The nak_disabled flag is generalized to retry_disabled and honors
xfer->closing so an endpoint close during a throttled retry tears down cleanly.
Verified on stm32f723disco HIL (slave + CFG_TUH_DWC2_DMA_ENABLE): host/cdc_msc_hid,
msc_file_explorer, and device_info all pass on both variants; DMA CDC echo went
from ~15-25% raw failure to 10/10 clean.
Diffstat (limited to 'docs/conf.py')
0 files changed, 0 insertions, 0 deletions
