Merge branch 'master' into fork/HiFiPhile/lwip_fix

5 files changed, 12 insertions, 123 deletions

diff --git a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
index 869500ad2..902a54f08 100644
--- a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
+++ b/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
@@ -48,7 +48,7 @@
 // Include MCU header
 #include "bsp/board_mcu.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
+#if TUSB_MCU_VENDOR_ESPRESSIF
   #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
 #endif
 
diff --git a/examples/device/audio_test_freertos/src/freertos_hook.c b/examples/device/audio_test_freertos/src/freertos_hook.c
deleted file mode 100644
index 4920e3fae..000000000
--- a/examples/device/audio_test_freertos/src/freertos_hook.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-//--------------------------------------------------------------------+
-// INCLUDE
-//--------------------------------------------------------------------+
-#include "FreeRTOS.h"
-#include "task.h"
-#include "common/tusb_common.h"
-
-
-void vApplicationMallocFailedHook(void)
-{
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName)
-{
-  (void) pxTask;
-  (void) pcTaskName;
-
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
- * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
- * used by the Idle task. */
-void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize )
-{
-  /* If the buffers to be provided to the Idle task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xIdleTaskTCB;
-  static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
-    state will be stored. */
-  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
-
-  /* Pass out the array that will be used as the Idle task's stack. */
-  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
-  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
-}
-
-/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
- * application must provide an implementation of vApplicationGetTimerTaskMemory()
- * to provide the memory that is used by the Timer service task. */
-void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize )
-{
-  /* If the buffers to be provided to the Timer task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xTimerTaskTCB;
-  static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Timer
-    task's state will be stored. */
-  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
-
-  /* Pass out the array that will be used as the Timer task's stack. */
-  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
-  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
-}
-
-#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X
-#include "iodefine.h"
-void vApplicationSetupTimerInterrupt(void)
-{
-  /* Enable CMT0 */
-  unsigned short oldPRCR = SYSTEM.PRCR.WORD;
-  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
-  MSTP(CMT0)       = 0;
-  SYSTEM.PRCR.WORD = (0xA5u<<8) | oldPRCR;
-
-  CMT0.CMCNT      = 0;
-  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
-  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
-  IR(CMT0, CMI0)  = 0;
-  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
-  IEN(CMT0, CMI0) = 1;
-  CMT.CMSTR0.BIT.STR0 = 1;
-}
-#endif
diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c
index a3751da40..c5143c3fc 100644
--- a/examples/device/audio_test_freertos/src/main.c
+++ b/examples/device/audio_test_freertos/src/main.c
@@ -38,7 +38,7 @@
 #include "bsp/board_api.h"
 #include "tusb.h"
 
-#if TUP_MCU_ESPRESSIF
+#if TUSB_MCU_VENDOR_ESPRESSIF
   // ESP-IDF need "freertos/" prefix in include path.
   // CFG_TUSB_OS_INC_PATH should be defined accordingly.
   #include "freertos/FreeRTOS.h"
@@ -133,16 +133,15 @@ int main(void)
 #endif
 
   // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-  #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+  #if !TUSB_MCU_VENDOR_ESPRESSIF
     vTaskStartScheduler();
   #endif
 
   return 0;
 }
 
-#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
-void app_main(void)
-{
+#if TUSB_MCU_VENDOR_ESPRESSIF
+void app_main(void) {
   main();
 }
 #endif
@@ -156,7 +155,11 @@ void usb_device_task(void* param)
   // init device stack on configured roothub port
   // This should be called after scheduler/kernel is started.
   // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
-  tud_init(BOARD_TUD_RHPORT);
+  tusb_rhport_init_t dev_init = {
+    .role = TUSB_ROLE_DEVICE,
+    .speed = TUSB_SPEED_AUTO
+  };
+  tusb_init(BOARD_TUD_RHPORT, &dev_init);
 
   if (board_init_after_tusb) {
     board_init_after_tusb();
diff --git a/examples/device/audio_test_freertos/src/plot_audio_samples.py b/examples/device/audio_test_freertos/src/plot_audio_samples.py
index 304b2d5de..46738eb3f 100644..100755
--- a/examples/device/audio_test_freertos/src/plot_audio_samples.py
+++ b/examples/device/audio_test_freertos/src/plot_audio_samples.py
@@ -1,3 +1,4 @@
+#!/usr/bin/env python3
 import sounddevice as sd
 import matplotlib.pyplot as plt
 import numpy as np
diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h
index 8b376a4c3..61c5cbb96 100644
--- a/examples/device/audio_test_freertos/src/tusb_config.h
+++ b/examples/device/audio_test_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@ extern "C" {
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUP_MCU_ESPRESSIF
+#if TUSB_MCU_VENDOR_ESPRESSIF
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif