add imxrt1170 evkb

1 files changed, 15 insertions, 28 deletions

diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c
index 172f48ae0..0d3f97c8f 100644
--- a/examples/device/cdc_msc/src/main.c
+++ b/examples/device/cdc_msc/src/main.c
@@ -39,7 +39,7 @@
  * - 1000 ms : device mounted
  * - 2500 ms : device is suspended
  */
-enum  {
+enum {
   BLINK_NOT_MOUNTED = 250,
   BLINK_MOUNTED = 1000,
   BLINK_SUSPENDED = 2500,
@@ -51,8 +51,7 @@ void led_blinking_task(void);
 void cdc_task(void);
 
 /*------------- MAIN -------------*/
-int main(void)
-{
+int main(void) {
   board_init();
 
   // init device stack on configured roothub port
@@ -62,8 +61,7 @@ int main(void)
     board_init_after_tusb();
   }
 
-  while (1)
-  {
+  while (1) {
     tud_task(); // tinyusb device task
     led_blinking_task();
 
@@ -76,29 +74,25 @@ int main(void)
 //--------------------------------------------------------------------+
 
 // Invoked when device is mounted
-void tud_mount_cb(void)
-{
+void tud_mount_cb(void) {
   blink_interval_ms = BLINK_MOUNTED;
 }
 
 // Invoked when device is unmounted
-void tud_umount_cb(void)
-{
+void tud_umount_cb(void) {
   blink_interval_ms = BLINK_NOT_MOUNTED;
 }
 
 // Invoked when usb bus is suspended
 // remote_wakeup_en : if host allow us  to perform remote wakeup
 // Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
-{
+void tud_suspend_cb(bool remote_wakeup_en) {
   (void) remote_wakeup_en;
   blink_interval_ms = BLINK_SUSPENDED;
 }
 
 // Invoked when usb bus is resumed
-void tud_resume_cb(void)
-{
+void tud_resume_cb(void) {
   blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED;
 }
 
@@ -106,15 +100,13 @@ void tud_resume_cb(void)
 //--------------------------------------------------------------------+
 // USB CDC
 //--------------------------------------------------------------------+
-void cdc_task(void)
-{
+void cdc_task(void) {
   // connected() check for DTR bit
   // Most but not all terminal client set this when making connection
   // if ( tud_cdc_connected() )
   {
     // connected and there are data available
-    if ( tud_cdc_available() )
-    {
+    if (tud_cdc_available()) {
       // read data
       char buf[64];
       uint32_t count = tud_cdc_read(buf, sizeof(buf));
@@ -131,37 +123,32 @@ void cdc_task(void)
 }
 
 // Invoked when cdc when line state changed e.g connected/disconnected
-void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
-{
+void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) {
   (void) itf;
   (void) rts;
 
   // TODO set some indicator
-  if ( dtr )
-  {
+  if (dtr) {
     // Terminal connected
-  }else
-  {
+  } else {
     // Terminal disconnected
   }
 }
 
 // Invoked when CDC interface received data from host
-void tud_cdc_rx_cb(uint8_t itf)
-{
+void tud_cdc_rx_cb(uint8_t itf) {
   (void) itf;
 }
 
 //--------------------------------------------------------------------+
 // BLINKING TASK
 //--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
+void led_blinking_task(void) {
   static uint32_t start_ms = 0;
   static bool led_state = false;
 
   // Blink every interval ms
-  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  if (board_millis() - start_ms < blink_interval_ms) return; // not enough time
   start_ms += blink_interval_ms;
 
   board_led_write(led_state);