rename board specific macro for example

- BOARD_DEVICE/HOST_RHPORT_NUM to  BOARD_TUD/H_RHPORT
- BOARD_DEVICE/HOST_RHPORT_SPEED to  BOARD_TUD/H_MAX_SPEED

17 files changed, 155 insertions, 141 deletions

diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h
index f93606092..037fc8290 100644
--- a/examples/device/cdc_dual_ports/src/tusb_config.h
+++ b/examples/device/cdc_dual_ports/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h
index 6507cef19..3849ad4d0 100644
--- a/examples/device/cdc_msc/src/tusb_config.h
+++ b/examples/device/cdc_msc/src/tusb_config.h
@@ -39,31 +39,45 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
+// This example doesn't use an RTOS
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS               OPT_OS_NONE
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
 
-// This example doesn't use an RTOS
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+
+
+// Device max speed, default is max speed that hardware controller could support without external PHY
+// BOARD_TUD_MAX_SPEED can be used to change value (e.g for board features external PHY).
+#ifdef BOARD_TUD_MAX_SPEED
+  #define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+#else
+  #define CFG_TUD_MAX_SPEED     OPT_MODE_DEFAULT_SPEED
 #endif
 
+
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0
 
diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h
index 55e84c62d..d8eeda07d 100644
--- a/examples/device/cdc_msc_freertos/src/tusb_config.h
+++ b/examples/device/cdc_msc_freertos/src/tusb_config.h
@@ -40,26 +40,26 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
   #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
        CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+    #define BOARD_TUD_MAX_SPEED   OPT_MODE_HIGH_SPEED
   #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+    #define BOARD_TUD_MAX_SPEED   OPT_MODE_FULL_SPEED
   #endif
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/dfu/src/tusb_config.h b/examples/device/dfu/src/tusb_config.h
index d4779b2e1..924ede47a 100644
--- a/examples/device/dfu/src/tusb_config.h
+++ b/examples/device/dfu/src/tusb_config.h
@@ -22,21 +22,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/dfu_runtime/src/tusb_config.h b/examples/device/dfu_runtime/src/tusb_config.h
index e15ae7997..f31c9c970 100644
--- a/examples/device/dfu_runtime/src/tusb_config.h
+++ b/examples/device/dfu_runtime/src/tusb_config.h
@@ -22,21 +22,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h
index ddc295dcc..333b62e03 100644
--- a/examples/device/dynamic_configuration/src/tusb_config.h
+++ b/examples/device/dynamic_configuration/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h
index 8bc85b722..e3c50aa3f 100644
--- a/examples/device/hid_boot_interface/src/tusb_config.h
+++ b/examples/device/hid_boot_interface/src/tusb_config.h
@@ -41,24 +41,24 @@
 
 // Use raspberry pio-usb for device
 // #define CFG_TUD_RPI_PIO_USB     1
-// #define BOARD_DEVICE_RHPORT_NUM 1
+// #define BOARD_TUD_RHPORT 1
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h
index d0f2b513f..1a9223f5b 100644
--- a/examples/device/hid_composite/src/tusb_config.h
+++ b/examples/device/hid_composite/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h
index 7522bd714..8fd6498e6 100644
--- a/examples/device/hid_composite_freertos/src/tusb_config.h
+++ b/examples/device/hid_composite_freertos/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h
index 9db50269c..e5ae4b0cc 100644
--- a/examples/device/hid_generic_inout/src/tusb_config.h
+++ b/examples/device/hid_generic_inout/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/hid_multiple_interface/src/tusb_config.h b/examples/device/hid_multiple_interface/src/tusb_config.h
index 32e8c2843..766b8e518 100644
--- a/examples/device/hid_multiple_interface/src/tusb_config.h
+++ b/examples/device/hid_multiple_interface/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h
index 967c71403..a7673245e 100644
--- a/examples/device/midi_test/src/tusb_config.h
+++ b/examples/device/midi_test/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h
index f617f5a4c..2778e61b0 100644
--- a/examples/device/msc_dual_lun/src/tusb_config.h
+++ b/examples/device/msc_dual_lun/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h
index b1b48598b..5042c0e5d 100644
--- a/examples/device/net_lwip_webserver/src/tusb_config.h
+++ b/examples/device/net_lwip_webserver/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h
index 5b2215be5..0b2df291a 100644
--- a/examples/device/usbtmc/src/tusb_config.h
+++ b/examples/device/usbtmc/src/tusb_config.h
@@ -22,21 +22,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h
index 3a079e66b..85bf80a64 100644
--- a/examples/device/video_capture/src/tusb_config.h
+++ b/examples/device/video_capture/src/tusb_config.h
@@ -35,21 +35,21 @@
 //--------------------------------------------------------------------
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif
diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h
index f5e4694e3..eab1d6387 100644
--- a/examples/device/webusb_serial/src/tusb_config.h
+++ b/examples/device/webusb_serial/src/tusb_config.h
@@ -40,21 +40,21 @@
 #endif
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+  #define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
 // Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+  #define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#if   BOARD_TUD_RHPORT == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
+#elif BOARD_TUD_RHPORT == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
 #else
   #error "Incorrect RHPort configuration"
 #endif