Merge remote-tracking branch 'origin/master' into xfer_isr

# Conflicts:
#	examples/device/audio_4_channel_mic_freertos/src/main.c
#	examples/device/audio_test_freertos/src/main.c
#	src/class/audio/audio_device.c

25 files changed, 263 insertions, 169 deletions

diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c
index 3f82398a2..9c76380a2 100644
--- a/examples/device/audio_4_channel_mic_freertos/src/main.c
+++ b/examples/device/audio_4_channel_mic_freertos/src/main.c
@@ -39,7 +39,7 @@
 #include "bsp/board_api.h"
 #include "tusb.h"
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   // ESP-IDF need "freertos/" prefix in include path.
   // CFG_TUSB_OS_INC_PATH should be defined accordingly.
   #include "freertos/FreeRTOS.h"
@@ -157,15 +157,15 @@ int main(void) {
   xTaskCreate(audio_isr_task, "audio", AUDIO_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL);
 #endif
 
-// skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-#if !TUSB_MCU_VENDOR_ESPRESSIF
-  vTaskStartScheduler();
-#endif
+  // only start scheduler for non-espressif mcu
+  #ifndef ESP_PLATFORM
+    vTaskStartScheduler();
+  #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 void app_main(void) {
   main();
 }
diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h
index 5ac51b153..f7c0efe08 100644
--- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h
+++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@ extern "C" {
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c
index 0a6cdfd4f..b1119c888 100644
--- a/examples/device/audio_test_freertos/src/main.c
+++ b/examples/device/audio_test_freertos/src/main.c
@@ -38,7 +38,7 @@
 #include "bsp/board_api.h"
 #include "tusb.h"
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   // ESP-IDF need "freertos/" prefix in include path.
   // CFG_TUSB_OS_INC_PATH should be defined accordingly.
   #include "freertos/FreeRTOS.h"
@@ -140,15 +140,15 @@ int main(void) {
   xTaskCreate(audio_isr_task, "audio", AUDIO_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL);
 #endif
 
-// skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-#if !TUSB_MCU_VENDOR_ESPRESSIF
-  vTaskStartScheduler();
-#endif
+  // only start scheduler for non-espressif mcu
+  #ifndef ESP_PLATFORM
+    vTaskStartScheduler();
+  #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 void app_main(void) {
   main();
 }
diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h
index 4b61e72bc..b708e2541 100644
--- a/examples/device/audio_test_freertos/src/tusb_config.h
+++ b/examples/device/audio_test_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@ extern "C" {
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c
index 2269d45f1..d91a8760e 100644
--- a/examples/device/board_test/src/main.c
+++ b/examples/device/board_test/src/main.c
@@ -49,25 +49,34 @@ int main(void) {
   while (1) {
     uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED;
 
+    int ch = board_getchar();
+    if (ch > 0) {
+      board_putchar(ch);
+      #ifndef LOGGER_UART
+      board_uart_write(&ch, 1);
+      #endif
+    }
+
     // Blink and print every interval ms
     if (!(board_millis() - start_ms < interval_ms)) {
-      board_uart_write(HELLO_STR, strlen(HELLO_STR));
-
       start_ms = board_millis();
 
+      if (ch < 0) {
+        // skip if echoing
+        printf(HELLO_STR);
+
+        #ifndef LOGGER_UART
+        board_uart_write(HELLO_STR, strlen(HELLO_STR));
+        #endif
+      }
+
       board_led_write(led_state);
       led_state = 1 - led_state; // toggle
     }
-
-    // echo
-    uint8_t ch;
-    if (board_uart_read(&ch, 1) > 0) {
-      board_uart_write(&ch, 1);
-    }
   }
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 void app_main(void) {
   main();
 }
diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h
index 8ac3bc8de..81829d450 100644
--- a/examples/device/board_test/src/tusb_config.h
+++ b/examples/device/board_test/src/tusb_config.h
@@ -44,7 +44,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c
index 63ae8a8c9..5a3e18358 100644
--- a/examples/device/cdc_dual_ports/src/main.c
+++ b/examples/device/cdc_dual_ports/src/main.c
@@ -98,27 +98,33 @@ void tud_umount_cb(void) {
   blink_interval_ms = BLINK_NOT_MOUNTED;
 }
 
-
 //--------------------------------------------------------------------+
 // USB CDC
 //--------------------------------------------------------------------+
 static void cdc_task(void) {
-  uint8_t itf;
-
-  for (itf = 0; itf < CFG_TUD_CDC; itf++) {
+  for (uint8_t itf = 0; itf < CFG_TUD_CDC; itf++) {
     // connected() check for DTR bit
     // Most but not all terminal client set this when making connection
     // if ( tud_cdc_n_connected(itf) )
     {
       if (tud_cdc_n_available(itf)) {
         uint8_t buf[64];
-
         uint32_t count = tud_cdc_n_read(itf, buf, sizeof(buf));
 
         // echo back to both serial ports
         echo_serial_port(0, buf, count);
         echo_serial_port(1, buf, count);
       }
+
+      // Press on-board button to send Uart status notification
+      static uint32_t btn_prev = 0;
+      static cdc_notify_uart_state_t uart_state = { .value = 0 };
+      const uint32_t btn = board_button_read();
+      if (!btn_prev && btn) {
+        uart_state.dsr ^= 1;
+        tud_cdc_notify_uart_state(&uart_state);
+      }
+      btn_prev = btn;
     }
   }
 }
diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h
index 070f08ed1..7f7df3909 100644
--- a/examples/device/cdc_dual_ports/src/tusb_config.h
+++ b/examples/device/cdc_dual_ports/src/tusb_config.h
@@ -97,6 +97,8 @@
 #define CFG_TUD_MIDI              0
 #define CFG_TUD_VENDOR            0
 
+#define CFG_TUD_CDC_NOTIFY        1 // Enable use of notification endpoint
+
 // CDC FIFO size of TX and RX
 #define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
 #define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c
index 7776eb958..bbcb479f5 100644
--- a/examples/device/cdc_dual_ports/src/usb_descriptors.c
+++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c
@@ -42,8 +42,7 @@
 //--------------------------------------------------------------------+
 // Device Descriptors
 //--------------------------------------------------------------------+
-tusb_desc_device_t const desc_device =
-{
+tusb_desc_device_t const desc_device = {
     .bLength            = sizeof(tusb_desc_device_t),
     .bDescriptorType    = TUSB_DESC_DEVICE,
     .bcdUSB             = USB_BCD,
@@ -68,16 +67,14 @@ tusb_desc_device_t const desc_device =
 
 // Invoked when received GET DEVICE DESCRIPTOR
 // Application return pointer to descriptor
-uint8_t const * tud_descriptor_device_cb(void)
-{
+uint8_t const *tud_descriptor_device_cb(void) {
   return (uint8_t const *) &desc_device;
 }
 
 //--------------------------------------------------------------------+
 // Configuration Descriptor
 //--------------------------------------------------------------------+
-enum
-{
+enum {
   ITF_NUM_CDC_0 = 0,
   ITF_NUM_CDC_0_DATA,
   ITF_NUM_CDC_1,
@@ -130,36 +127,32 @@ enum
   #define EPNUM_CDC_1_IN      0x84
 #endif
 
-uint8_t const desc_fs_configuration[] =
-{
+uint8_t const desc_fs_configuration[] = {
   // Config number, interface count, string index, total length, attribute, power in mA
   TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
 
   // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 64),
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 16, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 64),
 
   // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 64),
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 16, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 64),
 };
 
 #if TUD_OPT_HIGH_SPEED
 // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration
-
-uint8_t const desc_hs_configuration[] =
-{
+uint8_t const desc_hs_configuration[] = {
   // Config number, interface count, string index, total length, attribute, power in mA
   TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
 
   // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 512),
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 16, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 512),
 
   // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 512),
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 16, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 512),
 };
 
 // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
-tusb_desc_device_qualifier_t const desc_device_qualifier =
-{
+tusb_desc_device_qualifier_t const desc_device_qualifier = {
   .bLength            = sizeof(tusb_desc_device_t),
   .bDescriptorType    = TUSB_DESC_DEVICE,
   .bcdUSB             = USB_BCD,
@@ -177,34 +170,31 @@ tusb_desc_device_qualifier_t const desc_device_qualifier =
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
 // device_qualifier descriptor describes information about a high-speed capable device that would
 // change if the device were operating at the other speed. If not highspeed capable stall this request.
-uint8_t const* tud_descriptor_device_qualifier_cb(void)
-{
-  return (uint8_t const*) &desc_device_qualifier;
+uint8_t const *tud_descriptor_device_qualifier_cb(void) {
+  return (uint8_t const *) &desc_device_qualifier;
 }
 
 // Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
 // Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
-uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
-{
-  (void) index; // for multiple configurations
+uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) {
+  (void) index;// for multiple configurations
 
   // if link speed is high return fullspeed config, and vice versa
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_fs_configuration : desc_hs_configuration;
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration;
 }
 
-#endif // highspeed
+#endif// highspeed
 
 // Invoked when received GET CONFIGURATION DESCRIPTOR
 // Application return pointer to descriptor
 // Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
+uint8_t const *tud_descriptor_configuration_cb(uint8_t index) {
   (void) index; // for multiple configurations
 
 #if TUD_OPT_HIGH_SPEED
   // Although we are highspeed, host may be fullspeed.
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration;
 #else
   return desc_fs_configuration;
 #endif
@@ -223,8 +213,7 @@ enum {
 };
 
 // array of pointer to string descriptors
-char const *string_desc_arr[] =
-{
+char const *string_desc_arr[] = {
   (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
   "TinyUSB",                     // 1: Manufacturer
   "TinyUSB Device",              // 2: Product
@@ -254,14 +243,14 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) {
       // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
       // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
 
-      if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL;
+      if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) { return NULL; }
 
       const char *str = string_desc_arr[index];
 
       // Cap at max char
       chr_count = strlen(str);
       size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type
-      if ( chr_count > max_count ) chr_count = max_count;
+      if ( chr_count > max_count ) { chr_count = max_count; }
 
       // Convert ASCII string into UTF-16
       for ( size_t i = 0; i < chr_count; i++ ) {
@@ -272,6 +261,5 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) {
 
   // first byte is length (including header), second byte is string type
   _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2));
-
   return _desc_str;
 }
diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c
index f36c910d7..5cd93e7dd 100644
--- a/examples/device/cdc_msc/src/main.c
+++ b/examples/device/cdc_msc/src/main.c
@@ -119,6 +119,16 @@ void cdc_task(void) {
       tud_cdc_write(buf, count);
       tud_cdc_write_flush();
     }
+
+    // Press on-board button to send Uart status notification
+    static uint32_t btn_prev = 0;
+    static cdc_notify_uart_state_t uart_state = { .value = 0 };
+    const uint32_t btn = board_button_read();
+    if (!btn_prev && btn) {
+      uart_state.dsr ^= 1;
+      tud_cdc_notify_uart_state(&uart_state);
+    }
+    btn_prev = btn;
   }
 }
 
diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c
index 9645f4bfc..458681f58 100644
--- a/examples/device/cdc_msc/src/msc_disk.c
+++ b/examples/device/cdc_msc/src/msc_disk.c
@@ -184,7 +184,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void *buff
   }
 
   // Check for overflow of offset + bufsize
-  if (offset + bufsize > DISK_BLOCK_SIZE) {
+  if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) {
     return -1;
   }
 
diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h
index 03e0e649c..811d464e9 100644
--- a/examples/device/cdc_msc/src/tusb_config.h
+++ b/examples/device/cdc_msc/src/tusb_config.h
@@ -87,7 +87,7 @@
 //--------------------------------------------------------------------
 
 #ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
+#define CFG_TUD_ENDPOINT0_SIZE   64
 #endif
 
 //------------- CLASS -------------//
@@ -97,6 +97,8 @@
 #define CFG_TUD_MIDI             0
 #define CFG_TUD_VENDOR           0
 
+#define CFG_TUD_CDC_NOTIFY        1 // Enable use of notification endpoint
+
 // CDC FIFO size of TX and RX
 #define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
 #define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c
index 4b6b88041..edcee0462 100644
--- a/examples/device/cdc_msc/src/usb_descriptors.c
+++ b/examples/device/cdc_msc/src/usb_descriptors.c
@@ -52,7 +52,6 @@ tusb_desc_device_t const desc_device = {
     .bDeviceClass       = TUSB_CLASS_MISC,
     .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
     .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-
     .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
 
     .idVendor           = USB_VID,
@@ -131,7 +130,7 @@ uint8_t const desc_fs_configuration[] = {
     TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
 
     // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-    TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
+    TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 16, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
 
     // Interface number, string index, EP Out & EP In address, EP size
     TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
@@ -146,7 +145,7 @@ uint8_t const desc_hs_configuration[] = {
     TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
 
     // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-    TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
+    TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 16, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
 
     // Interface number, string index, EP Out & EP In address, EP size
     TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
@@ -197,7 +196,6 @@ uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) {
 
 #endif // highspeed
 
-
 // Invoked when received GET CONFIGURATION DESCRIPTOR
 // Application return pointer to descriptor
 // Descriptor contents must exist long enough for transfer to complete
@@ -256,14 +254,14 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) {
       // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
       // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
 
-      if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL;
+      if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) { return NULL; }
 
       const char *str = string_desc_arr[index];
 
       // Cap at max char
       chr_count = strlen(str);
       size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type
-      if ( chr_count > max_count ) chr_count = max_count;
+      if ( chr_count > max_count ) { chr_count = max_count; }
 
       // Convert ASCII string into UTF-16
       for ( size_t i = 0; i < chr_count; i++ ) {
@@ -274,6 +272,5 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) {
 
   // first byte is length (including header), second byte is string type
   _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2));
-
   return _desc_str;
 }
diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c
index c51e8ea81..09ccc9bf3 100644
--- a/examples/device/cdc_msc_freertos/src/main.c
+++ b/examples/device/cdc_msc_freertos/src/main.c
@@ -30,7 +30,7 @@
 #include "bsp/board_api.h"
 #include "tusb.h"
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   #define USBD_STACK_SIZE     4096
 #else
   // Increase stack size when debug log is enabled
@@ -72,7 +72,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
 static void usb_device_task(void *param);
 void led_blinking_task(void* param);
 void cdc_task(void *params);
-
+extern void msc_disk_init(void);
 //--------------------------------------------------------------------+
 // Main
 //--------------------------------------------------------------------+
@@ -91,15 +91,15 @@ int main(void) {
   xTaskCreate(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL);
 #endif
 
-#if !TUSB_MCU_VENDOR_ESPRESSIF
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
+#ifndef ESP_PLATFORM
+  // only start scheduler for non-espressif mcu
   vTaskStartScheduler();
 #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 void app_main(void) {
   main();
 }
@@ -123,6 +123,7 @@ static void usb_device_task(void *param) {
     board_init_after_tusb();
   }
 
+  msc_disk_init();
   // RTOS forever loop
   while (1) {
     // put this thread to waiting state until there is new events
@@ -188,6 +189,16 @@ void cdc_task(void *params) {
       }
 
       tud_cdc_write_flush();
+
+      // Press on-board button to send Uart status notification
+      static uint32_t btn_prev = 0;
+      static cdc_notify_uart_state_t uart_state = { .value = 0 };
+      const uint32_t btn = board_button_read();
+      if (!btn_prev && btn) {
+        uart_state.dsr ^= 1;
+        tud_cdc_notify_uart_state(&uart_state);
+      }
+      btn_prev = btn;
     }
 
     // For ESP32-Sx this delay is essential to allow idle how to run and reset watchdog
diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c
index d325d77fa..d1ff2f71b 100644
--- a/examples/device/cdc_msc_freertos/src/msc_disk.c
+++ b/examples/device/cdc_msc_freertos/src/msc_disk.c
@@ -28,6 +28,37 @@
 
 #if CFG_TUD_MSC
 
+// Use async IO in example or not
+#define CFG_EXAMPLE_MSC_ASYNC_IO    1
+
+// Simulate read/write operation delay
+#define CFG_EXAMPLE_MSC_IO_DELAY_MS 0
+
+#if CFG_EXAMPLE_MSC_ASYNC_IO
+#define IO_STACK_SIZE      configMINIMAL_STACK_SIZE
+
+typedef struct {
+  uint8_t lun;
+  bool is_read;
+  uint32_t lba;
+  uint32_t offset;
+  void* buffer;
+  uint32_t bufsize;
+} io_ops_t;
+
+QueueHandle_t io_queue;
+#if configSUPPORT_STATIC_ALLOCATION
+uint8_t io_queue_buf[sizeof(io_ops_t)];
+StaticQueue_t io_queue_static;
+StackType_t  io_stack[IO_STACK_SIZE];
+StaticTask_t io_taskdef;
+#endif
+
+static void io_task(void *params);
+#endif
+
+void msc_disk_init(void);
+
 // whether host does safe-eject
 static bool ejected = false;
 
@@ -40,8 +71,7 @@ static bool ejected = false;
 If you find any bugs or get any questions, feel free to file an\r\n\
 issue at github.com/hathach/tinyusb"
 
-enum
-{
+enum {
   DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
   DISK_BLOCK_SIZE = 512
 };
@@ -119,16 +149,52 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
   README_CONTENTS
 };
 
+#if CFG_EXAMPLE_MSC_ASYNC_IO
+void msc_disk_init() {
+
+#if configSUPPORT_STATIC_ALLOCATION
+  io_queue = xQueueCreateStatic(1, sizeof(io_ops_t), io_queue_buf, &io_queue_static);
+  xTaskCreateStatic(io_task, "io", IO_STACK_SIZE, NULL, 2, io_stack, &io_taskdef);
+#else
+  io_queue = xQueueCreate(1, sizeof(io_ops_t));
+  xTaskCreate(io_task, "io", IO_STACK_SIZE, NULL, 2, NULL);
+#endif
+}
+
+static void io_task(void *params) {
+  (void) params;
+  io_ops_t io_ops;
+  while (1) {
+    if (xQueueReceive(io_queue, &io_ops, portMAX_DELAY)) {
+      const uint8_t* addr = msc_disk[io_ops.lba] + io_ops.offset;
+      int32_t nbytes = io_ops.bufsize;
+      if (io_ops.is_read) {
+        memcpy(io_ops.buffer, addr, io_ops.bufsize);
+      } else {
+#ifndef CFG_EXAMPLE_MSC_READONLY
+        memcpy((uint8_t*) addr, io_ops.buffer, io_ops.bufsize);
+#else
+        nbytes = -1; // failed to write
+#endif
+      }
+
+      tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS);
+      tud_msc_async_io_done(nbytes, false);
+    }
+  }
+}
+
+#else
+void msc_disk_init() {}
+#endif
+
 // Invoked when received SCSI_CMD_INQUIRY
 // Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
-{
+void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) {
   (void) lun;
-
   const char vid[] = "TinyUSB";
   const char pid[] = "Mass Storage";
   const char rev[] = "1.0";
-
   memcpy(vendor_id  , vid, strlen(vid));
   memcpy(product_id , pid, strlen(pid));
   memcpy(product_rev, rev, strlen(rev));
@@ -136,8 +202,7 @@ void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16
 
 // Invoked when received Test Unit Ready command.
 // return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun)
-{
+bool tud_msc_test_unit_ready_cb(uint8_t lun) {
   (void) lun;
 
   // RAM disk is ready until ejected
@@ -152,10 +217,8 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun)
 
 // Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
 // Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
-{
+void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) {
   (void) lun;
-
   *block_count = DISK_BLOCK_NUM;
   *block_size  = DISK_BLOCK_SIZE;
 }
@@ -163,18 +226,14 @@ void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_siz
 // Invoked when received Start Stop Unit command
 // - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
 // - Start = 1 : active mode, if load_eject = 1 : load disk storage
-bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
-{
+bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) {
   (void) lun;
   (void) power_condition;
 
-  if ( load_eject )
-  {
-    if (start)
-    {
+  if (load_eject) {
+    if (start) {
       // load disk storage
-    }else
-    {
+    } else {
       // unload disk storage
       ejected = true;
     }
@@ -185,90 +244,107 @@ bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, boo
 
 // Callback invoked when received READ10 command.
 // Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
-int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
-{
+int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) {
   (void) lun;
 
   // out of ramdisk
-  if ( lba >= DISK_BLOCK_NUM ) {
-    return -1;
+  if (lba >= DISK_BLOCK_NUM) {
+    return TUD_MSC_RET_ERROR;
   }
 
   // Check for overflow of offset + bufsize
-  if ( offset + bufsize > DISK_BLOCK_SIZE ) {
-    return -1;
+  if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) {
+    return TUD_MSC_RET_ERROR;
   }
 
-  uint8_t const* addr = msc_disk[lba] + offset;
-  memcpy(buffer, addr, bufsize);
+  #if CFG_EXAMPLE_MSC_ASYNC_IO
+  io_ops_t io_ops = {.is_read = true, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize};
 
-  return (int32_t) bufsize;
+  // Send IO operation to IO task
+  TU_ASSERT(xQueueSend(io_queue, &io_ops, 0) == pdPASS);
+
+  return TUD_MSC_RET_ASYNC;
+  #else
+  uint8_t const *addr = msc_disk[lba] + offset;
+  memcpy(buffer, addr, bufsize);
+  return bufsize;
+  #endif
 }
 
-bool tud_msc_is_writable_cb (uint8_t lun)
-{
+bool tud_msc_is_writable_cb (uint8_t lun) {
   (void) lun;
 
-#ifdef CFG_EXAMPLE_MSC_READONLY
+  #ifdef CFG_EXAMPLE_MSC_READONLY
   return false;
-#else
+  #else
   return true;
-#endif
+  #endif
 }
 
 // Callback invoked when received WRITE10 command.
 // Process data in buffer to disk's storage and return number of written bytes
-int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
-{
+int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) {
+  // out of ramdisk
+  if (lba >= DISK_BLOCK_NUM) {
+    return TUD_MSC_RET_ERROR;
+  }
+
+  // Check for overflow of offset + bufsize
+  if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) {
+    return TUD_MSC_RET_ERROR;
+  }
+
+  #ifdef CFG_EXAMPLE_MSC_READONLY
   (void) lun;
+  (void) buffer;
+  return bufsize;
+  #endif
 
-  // out of ramdisk
-  if ( lba >= DISK_BLOCK_NUM ) return -1;
+  #if CFG_EXAMPLE_MSC_ASYNC_IO
+  io_ops_t io_ops = {.is_read = false, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize};
 
-#ifndef CFG_EXAMPLE_MSC_READONLY
-  uint8_t* addr = msc_disk[lba] + offset;
+  // Send IO operation to IO task
+  TU_ASSERT(xQueueSend(io_queue, &io_ops, 0) == pdPASS);
+
+  return TUD_MSC_RET_ASYNC;
+  #else
+  uint8_t *addr = msc_disk[lba] + offset;
   memcpy(addr, buffer, bufsize);
-#else
-  (void) lba; (void) offset; (void) buffer;
-#endif
+  tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS);
 
-  return (int32_t) bufsize;
+  return bufsize;
+  #endif
 }
 
 // Callback invoked when received an SCSI command not in built-in list below
 // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
 // - READ10 and WRITE10 has their own callbacks
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
-{
+int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) {
   // read10 & write10 has their own callback and MUST not be handled here
 
-  void const* response = NULL;
+  void const *response = NULL;
   int32_t resplen = 0;
 
   // most scsi handled is input
   bool in_xfer = true;
 
-  switch (scsi_cmd[0])
-  {
+  switch (scsi_cmd[0]) {
     default:
       // Set Sense = Invalid Command Operation
       tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
 
       // negative means error -> tinyusb could stall and/or response with failed status
       resplen = -1;
-    break;
+      break;
   }
 
   // return resplen must not larger than bufsize
-  if ( resplen > bufsize ) resplen = bufsize;
+  if (resplen > bufsize) { resplen = bufsize; }
 
-  if ( response && (resplen > 0) )
-  {
-    if(in_xfer)
-    {
+  if (response && (resplen > 0)) {
+    if (in_xfer) {
       memcpy(buffer, response, (size_t) resplen);
-    }else
-    {
+    } else {
       // SCSI output
     }
   }
diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h
index c3f2f7fb5..9cc3a18d1 100644
--- a/examples/device/cdc_msc_freertos/src/tusb_config.h
+++ b/examples/device/cdc_msc_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
@@ -104,6 +104,8 @@
 #define CFG_TUD_MIDI             0
 #define CFG_TUD_VENDOR           0
 
+#define CFG_TUD_CDC_NOTIFY        1 // Enable use of notification endpoint
+
 // CDC FIFO size of TX and RX
 #define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
 #define CFG_TUD_CDC_TX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c
index 405a57fe4..a55fa3675 100644
--- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c
+++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c
@@ -52,7 +52,6 @@ tusb_desc_device_t const desc_device = {
     .bDeviceClass       = TUSB_CLASS_MISC,
     .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
     .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-
     .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
 
     .idVendor           = USB_VID,
@@ -131,7 +130,7 @@ uint8_t const desc_fs_configuration[] =
   TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
 
   // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 16, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
 
   // Interface number, string index, EP Out & EP In address, EP size
   TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
@@ -147,7 +146,7 @@ uint8_t const desc_hs_configuration[] =
   TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
 
   // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 16, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),
 
   // Interface number, string index, EP Out & EP In address, EP size
   TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
@@ -176,16 +175,14 @@ tusb_desc_device_qualifier_t const desc_device_qualifier =
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
 // device_qualifier descriptor describes information about a high-speed capable device that would
 // change if the device were operating at the other speed. If not highspeed capable stall this request.
-uint8_t const* tud_descriptor_device_qualifier_cb(void)
-{
+uint8_t const* tud_descriptor_device_qualifier_cb(void) {
   return (uint8_t const*) &desc_device_qualifier;
 }
 
 // Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
 // Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
-uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
-{
+uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) {
   (void) index; // for multiple configurations
 
   // if link speed is high return fullspeed config, and vice versa
@@ -204,13 +201,12 @@ uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
 // Invoked when received GET CONFIGURATION DESCRIPTOR
 // Application return pointer to descriptor
 // Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
-{
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index) {
   (void) index; // for multiple configurations
 
 #if TUD_OPT_HIGH_SPEED
   // Although we are highspeed, host may be fullspeed.
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration;
 #else
   return desc_fs_configuration;
 #endif
@@ -229,8 +225,7 @@ enum {
 };
 
 // array of pointer to string descriptors
-char const *string_desc_arr[] =
-{
+char const *string_desc_arr[] = {
   (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
   "TinyUSB",                     // 1: Manufacturer
   "TinyUSB Device",              // 2: Product
@@ -261,14 +256,14 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) {
       // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
       // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
 
-      if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL;
+      if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) { return NULL; }
 
       const char *str = string_desc_arr[index];
 
       // Cap at max char
       chr_count = strlen(str);
       size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type
-      if ( chr_count > max_count ) chr_count = max_count;
+      if ( chr_count > max_count ) { chr_count = max_count; }
 
       // Convert ASCII string into UTF-16
       for ( size_t i = 0; i < chr_count; i++ ) {
@@ -279,6 +274,5 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) {
 
   // first byte is length (including header), second byte is string type
   _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2));
-
   return _desc_str;
 }
diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c
index 30c0331ef..3f5e8a91c 100644
--- a/examples/device/hid_composite_freertos/src/main.c
+++ b/examples/device/hid_composite_freertos/src/main.c
@@ -31,7 +31,7 @@
 #include "tusb.h"
 #include "usb_descriptors.h"
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   // ESP-IDF need "freertos/" prefix in include path.
   // CFG_TUSB_OS_INC_PATH should be defined accordingly.
   #include "freertos/FreeRTOS.h"
@@ -112,17 +112,16 @@ int main(void)
 
   xTimerStart(blinky_tm, 0);
 
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-#if !TUSB_MCU_VENDOR_ESPRESSIF
+  // only start scheduler for non-espressif mcu
+#ifndef ESP_PLATFORM
   vTaskStartScheduler();
 #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
-void app_main(void)
-{
+#ifdef ESP_PLATFORM
+void app_main(void) {
   main();
 }
 #endif
diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h
index 6ec38b95c..b28033a0c 100644
--- a/examples/device/hid_composite_freertos/src/tusb_config.h
+++ b/examples/device/hid_composite_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/midi_test_freertos/src/main.c b/examples/device/midi_test_freertos/src/main.c
index dbe89080c..3e406d38d 100644
--- a/examples/device/midi_test_freertos/src/main.c
+++ b/examples/device/midi_test_freertos/src/main.c
@@ -40,7 +40,7 @@
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF PROTYPES
 //--------------------------------------------------------------------+
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   #define USBD_STACK_SIZE     4096
 #else
   // Increase stack size when debug log is enabled
@@ -95,15 +95,15 @@ int main(void) {
   xTaskCreate(midi_task, "midi", MIDI_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, NULL);
 #endif
 
-#if !TUSB_MCU_VENDOR_ESPRESSIF
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
+#ifndef ESP_PLATFORM
+  // only start scheduler for non-espressif mcu
   vTaskStartScheduler();
 #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 void app_main(void) {
   main();
 }
diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile
index 141532466..4ad110dec 100644
--- a/examples/device/net_lwip_webserver/Makefile
+++ b/examples/device/net_lwip_webserver/Makefile
@@ -1,5 +1,3 @@
-DEPS_SUBMODULES += lib/lwip
-
 include ../../build_system/make/make.mk
 
 # suppress warning caused by lwip
diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c
index 04d4af4e5..0406279fd 100644
--- a/examples/device/video_capture/src/main.c
+++ b/examples/device/video_capture/src/main.c
@@ -292,7 +292,7 @@ void led_blinking_task(void* param) {
 #define BLINKY_STACK_SIZE   configMINIMAL_STACK_SIZE
 #define VIDEO_STACK_SIZE    (configMINIMAL_STACK_SIZE*4)
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   #define USBD_STACK_SIZE     4096
   int main(void);
   void app_main(void) {
@@ -351,8 +351,8 @@ void freertos_init_task(void) {
   xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL);
   #endif
 
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-  #if !TUSB_MCU_VENDOR_ESPRESSIF
+  // only start scheduler for non-espressif mcu
+  #ifndef ESP_PLATFORM
   vTaskStartScheduler();
   #endif
 }
diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h
index 6dbd6f2a5..4ba86ca65 100644
--- a/examples/device/video_capture/src/tusb_config.h
+++ b/examples/device/video_capture/src/tusb_config.h
@@ -58,7 +58,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c
index 245e7abb8..dc616e3fa 100644
--- a/examples/device/video_capture_2ch/src/main.c
+++ b/examples/device/video_capture_2ch/src/main.c
@@ -300,7 +300,7 @@ void led_blinking_task(void* param) {
 #define BLINKY_STACK_SIZE   configMINIMAL_STACK_SIZE
 #define VIDEO_STACK_SIZE    (configMINIMAL_STACK_SIZE*4)
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   #define USBD_STACK_SIZE     4096
   int main(void);
   void app_main(void) {
@@ -359,8 +359,8 @@ void freertos_init_task(void) {
   xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL);
   #endif
 
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-  #if !TUSB_MCU_VENDOR_ESPRESSIF
+  // only start scheduler for non-espressif mcu
+  #ifndef ESP_PLATFORM
   vTaskStartScheduler();
   #endif
 }
diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h
index 91775a327..e84e49879 100644
--- a/examples/device/video_capture_2ch/src/tusb_config.h
+++ b/examples/device/video_capture_2ch/src/tusb_config.h
@@ -58,7 +58,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif