Merge branch 'master' into fork/HiFiPhile/dcd_notif

98 files changed, 646 insertions, 1314 deletions

diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt
index 26a808a21..bb7dd0a0f 100644
--- a/examples/device/CMakeLists.txt
+++ b/examples/device/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/CMakePresets.json b/examples/device/CMakePresets.json
new file mode 100644
index 000000000..c22e8c0ec
--- /dev/null
+++ b/examples/device/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt
index 0f5d36193..c8086ae46 100644
--- a/examples/device/audio_4_channel_mic/CMakeLists.txt
+++ b/examples/device/audio_4_channel_mic/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/audio_4_channel_mic/CMakePresets.json b/examples/device/audio_4_channel_mic/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/audio_4_channel_mic/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c
index e8c40309e..f78e48f0c 100644
--- a/examples/device/audio_4_channel_mic/src/main.c
+++ b/examples/device/audio_4_channel_mic/src/main.c
@@ -69,13 +69,8 @@ uint8_t clkValid;
 audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; 			// Volume range state
 audio_control_range_4_n_t(1) sampleFreqRng; 						// Sample frequency range state
 
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-// Audio test data, each buffer contains 2 channels, buffer[0] for CH0-1, buffer[1] for CH1-2
-uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000/CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO];
-#else
 // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3
 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000];
-#endif
 
 void led_blinking_task(void);
 void audio_task(void);
@@ -106,27 +101,6 @@ int main(void)
   sampleFreqRng.subrange[0].bRes = 0;
 
   // Generate dummy data
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-  uint16_t * p_buff = i2s_dummy_buffer[0];
-  uint16_t dataVal = 0;
-  for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
-  {
-    // CH0 saw wave
-    *p_buff++ = dataVal;
-    // CH1 inverted saw wave
-    *p_buff++ = 3200 + AUDIO_SAMPLE_RATE/1000 - dataVal;
-    dataVal+= 32;
-  }
-  p_buff = i2s_dummy_buffer[1];
-  for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
-  {
-    // CH3 square wave
-    *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 3400:5000;
-    // CH4 sinus wave
-    float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000);
-    *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000);
-  }
-#else
   uint16_t * p_buff = i2s_dummy_buffer;
   uint16_t dataVal = 0;
   for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
@@ -142,7 +116,6 @@ int main(void)
     float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000);
     *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000);
   }
-#endif
 
   while (1)
   {
@@ -195,15 +168,7 @@ void audio_task(void)
   uint32_t curr_ms = board_millis();
   if ( start_ms == curr_ms ) return; // not enough time
   start_ms = curr_ms;
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-  // Write I2S buffer into FIFO
-  for (uint8_t cnt=0; cnt < 2; cnt++)
-  {
-    tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX);
-  }
-#else
   tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX);
-#endif
 }
 
 //--------------------------------------------------------------------+
diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h
index 46484f847..446a7a32a 100644
--- a/examples/device/audio_4_channel_mic/src/tusb_config.h
+++ b/examples/device/audio_4_channel_mic/src/tusb_config.h
@@ -115,26 +115,11 @@ extern "C" {
 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX            4         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
 #define CFG_TUD_AUDIO_EP_SZ_IN                        TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX)
 
-#define CFG_TUD_AUDIO_ENABLE_ENCODING                 1
 #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL              1
 
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          CFG_TUD_AUDIO_EP_SZ_IN
-
-#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING          1
-#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX      2         // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
-#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO        (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
-#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ       (TUD_OPT_HIGH_SPEED ? 32 : 4) * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) // Example write FIFO every 1ms, so it should be 8 times larger for HS device
-
-#else
-
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device
 
-#endif
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt b/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt
index 285d4490b..c50d4fef7 100644
--- a/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt
+++ b/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/audio_4_channel_mic_freertos/CMakePresets.json b/examples/device/audio_4_channel_mic_freertos/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/audio_4_channel_mic_freertos/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/audio_4_channel_mic_freertos/Makefile b/examples/device/audio_4_channel_mic_freertos/Makefile
index 0202f631c..bd625b345 100644
--- a/examples/device/audio_4_channel_mic_freertos/Makefile
+++ b/examples/device/audio_4_channel_mic_freertos/Makefile
@@ -1,14 +1,9 @@
+RTOS = freertos
 include ../../build_system/make/make.mk
 
-FREERTOS_SRC = lib/FreeRTOS-Kernel
-FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC)
-
 INC += \
 	src \
-	src/FreeRTOSConfig \
 	$(TOP)/hw \
-	$(TOP)/$(FREERTOS_SRC)/include \
-	$(TOP)/$(FREERTOS_PORTABLE_SRC) \
 
 # Example source
 EXAMPLE_SOURCE = \
@@ -17,21 +12,4 @@ EXAMPLE_SOURCE = \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# FreeRTOS source, all files in port folder
-SRC_C += \
-	$(FREERTOS_SRC)/list.c \
-	$(FREERTOS_SRC)/queue.c \
-	$(FREERTOS_SRC)/tasks.c \
-	$(FREERTOS_SRC)/timers.c \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c))
-
-SRC_S += \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s))
-
-# Suppress FreeRTOS warnings
-CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls
-
-# FreeRTOS (lto + Os) linker issue
-LDFLAGS += -Wl,--undefined=vTaskSwitchContext
-
 include ../../build_system/make/rules.mk
diff --git a/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
deleted file mode 100644
index 902a54f08..000000000
--- a/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * FreeRTOS Kernel V10.0.0
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software. If you wish to use our Amazon
- * FreeRTOS name, please do so in a fair use way that does not cause confusion.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
- *
- * See http://www.freertos.org/a00110.html.
- *----------------------------------------------------------*/
-
-// skip if included from IAR assembler
-#ifndef __IASMARM__
-
-// Include MCU header
-#include "bsp/board_mcu.h"
-
-#if TUSB_MCU_VENDOR_ESPRESSIF
-  #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
-#endif
-
-// TODO fix later
-#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
-  extern u32 SystemCoreClock;
-#else
-  // FIXME cause redundant-decls warnings
-  extern uint32_t SystemCoreClock;
-#endif
-
-#endif
-
-/* Cortex M23/M33 port configuration. */
-#define configENABLE_MPU								        0
-#define configENABLE_FPU								        1
-#define configENABLE_TRUSTZONE					        0
-#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
-#define configRUN_FREERTOS_SECURE_ONLY          1
-
-#define configUSE_PREEMPTION                    1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
-#define configCPU_CLOCK_HZ                      SystemCoreClock
-#define configTICK_RATE_HZ                      ( 1000 )
-#define configMAX_PRIORITIES                    ( 5 )
-#define configMINIMAL_STACK_SIZE                ( 128 )
-#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
-#define configMAX_TASK_NAME_LEN                 16
-#define configUSE_16_BIT_TICKS                  0
-#define configIDLE_SHOULD_YIELD                 1
-#define configUSE_MUTEXES                       1
-#define configUSE_RECURSIVE_MUTEXES             1
-#define configUSE_COUNTING_SEMAPHORES           1
-#define configQUEUE_REGISTRY_SIZE               4
-#define configUSE_QUEUE_SETS                    0
-#define configUSE_TIME_SLICING                  0
-#define configUSE_NEWLIB_REENTRANT              0
-#define configENABLE_BACKWARD_COMPATIBILITY     1
-#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
-
-#define configSUPPORT_STATIC_ALLOCATION         1
-#define configSUPPORT_DYNAMIC_ALLOCATION        0
-
-/* Hook function related definitions. */
-#define configUSE_IDLE_HOOK                    0
-#define configUSE_TICK_HOOK                    0
-#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
-#define configCHECK_FOR_STACK_OVERFLOW         2
-#define configCHECK_HANDLER_INSTALLATION       0
-
-/* Run time and task stats gathering related definitions. */
-#define configGENERATE_RUN_TIME_STATS          0
-#define configUSE_TRACE_FACILITY               1 // legacy trace
-#define configUSE_STATS_FORMATTING_FUNCTIONS   0
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                  0
-#define configMAX_CO_ROUTINE_PRIORITIES        2
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS                       1
-#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
-#define configTIMER_QUEUE_LENGTH               32
-#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
-
-/* Optional functions - most linkers will remove unused functions anyway. */
-#define INCLUDE_vTaskPrioritySet               0
-#define INCLUDE_uxTaskPriorityGet              0
-#define INCLUDE_vTaskDelete                    0
-#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
-#define INCLUDE_xResumeFromISR                 0
-#define INCLUDE_vTaskDelayUntil                1
-#define INCLUDE_vTaskDelay                     1
-#define INCLUDE_xTaskGetSchedulerState         0
-#define INCLUDE_xTaskGetCurrentTaskHandle      0
-#define INCLUDE_uxTaskGetStackHighWaterMark    0
-#define INCLUDE_xTaskGetIdleTaskHandle         0
-#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
-#define INCLUDE_pcTaskGetTaskName              0
-#define INCLUDE_eTaskGetState                  0
-#define INCLUDE_xEventGroupSetBitFromISR       0
-#define INCLUDE_xTimerPendFunctionCall         0
-
-#ifdef __RX__
-/* Renesas RX series */
-#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
-#define vTickISR								              INT_Excep_CMT0_CMI0
-#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
-#define configKERNEL_INTERRUPT_PRIORITY			  1
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
-
-#else
-
-/* FreeRTOS hooks to NVIC vectors */
-#define xPortPendSVHandler    PendSV_Handler
-#define xPortSysTickHandler   SysTick_Handler
-#define vPortSVCHandler       SVC_Handler
-
-//--------------------------------------------------------------------+
-// Interrupt nesting behavior configuration.
-//--------------------------------------------------------------------+
-#if defined(__NVIC_PRIO_BITS)
-  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
-	#define configPRIO_BITS       __NVIC_PRIO_BITS
-
-#elif defined(__ECLIC_INTCTLBITS)
-  // RISC-V Bumblebee core from nuclei
-  #define configPRIO_BITS       __ECLIC_INTCTLBITS
-
-#elif defined(__IASMARM__)
-  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
-  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
-  // IAR user must update this to correct value of the target MCU
-  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
-  #define configPRIO_BITS       2
-
-#else
-  #error "FreeRTOS configPRIO_BITS to be defined"
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-#endif
-
-#endif /* __FREERTOS_CONFIG__H */
diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c
index c9de4029a..d5a34b194 100644
--- a/examples/device/audio_4_channel_mic_freertos/src/main.c
+++ b/examples/device/audio_4_channel_mic_freertos/src/main.c
@@ -39,7 +39,7 @@
 #include "bsp/board_api.h"
 #include "tusb.h"
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   // ESP-IDF need "freertos/" prefix in include path.
   // CFG_TUSB_OS_INC_PATH should be defined accordingly.
   #include "freertos/FreeRTOS.h"
@@ -105,13 +105,8 @@ uint8_t clkValid;
 audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; 			// Volume range state
 audio_control_range_4_n_t(1) sampleFreqRng; 						// Sample frequency range state
 
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-// Audio test data, each buffer contains 2 channels, buffer[0] for CH0-1, buffer[1] for CH1-2
-uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000/CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO];
-#else
 // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3
 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000];
-#endif
 
 void led_blinking_task(void* param);
 void usb_device_task(void* param);
@@ -132,27 +127,6 @@ int main(void)
   sampleFreqRng.subrange[0].bRes = 0;
 
   // Generate dummy data
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-  uint16_t * p_buff = i2s_dummy_buffer[0];
-  uint16_t dataVal = 0;
-  for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
-  {
-    // CH0 saw wave
-    *p_buff++ = dataVal;
-    // CH1 inverted saw wave
-    *p_buff++ = 3200 + AUDIO_SAMPLE_RATE/1000 - dataVal;
-    dataVal+= 32;
-  }
-  p_buff = i2s_dummy_buffer[1];
-  for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
-  {
-    // CH3 square wave
-    *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 3400:5000;
-    // CH4 sinus wave
-    float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000);
-    *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000);
-  }
-#else
   uint16_t * p_buff = i2s_dummy_buffer;
   uint16_t dataVal = 0;
   for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
@@ -168,7 +142,6 @@ int main(void)
     float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000);
     *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000);
   }
-#endif
 
 #if configSUPPORT_STATIC_ALLOCATION
   // blinky task
@@ -185,17 +158,16 @@ int main(void)
   xTaskCreate(audio_task, "audio", AUDIO_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL);
 #endif
 
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-  #if !TUSB_MCU_VENDOR_ESPRESSIF
+  // only start scheduler for non-espressif mcu
+  #ifndef ESP_PLATFORM
     vTaskStartScheduler();
   #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
-void app_main(void)
-{
+#ifdef ESP_PLATFORM
+void app_main(void) {
   main();
 }
 #endif
@@ -269,15 +241,7 @@ void audio_task(void* param)
   // Here we simulate a I2S receive callback every 1ms.
   while (1) {
     vTaskDelay(1);
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-  // Write I2S buffer into FIFO
-    for (uint8_t cnt=0; cnt < 2; cnt++)
-    {
-      tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX);
-    }
-#else
     tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX);
-#endif
   }
 }
 
diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h
index 5cd93b0d6..f7c0efe08 100644
--- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h
+++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@ extern "C" {
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
@@ -121,26 +121,11 @@ extern "C" {
 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX            4         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
 #define CFG_TUD_AUDIO_EP_SZ_IN                        TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX)
 
-#define CFG_TUD_AUDIO_ENABLE_ENCODING                 1
 #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL              1
 
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          CFG_TUD_AUDIO_EP_SZ_IN
-
-#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING          1
-#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX      2         // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
-#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO        (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
-#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ       (TUD_OPT_HIGH_SPEED ? 32 : 4) * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) // Example write FIFO every 1ms, so it should be 8 times larger for HS device
-
-#else
-
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device
 
-#endif
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt
index f61e1b640..6a7e68c3d 100644
--- a/examples/device/audio_test/CMakeLists.txt
+++ b/examples/device/audio_test/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/audio_test/CMakePresets.json b/examples/device/audio_test/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/audio_test/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/audio_test_freertos/CMakeLists.txt b/examples/device/audio_test_freertos/CMakeLists.txt
index 33f3b915f..6ce9e72fe 100644
--- a/examples/device/audio_test_freertos/CMakeLists.txt
+++ b/examples/device/audio_test_freertos/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/audio_test_freertos/CMakePresets.json b/examples/device/audio_test_freertos/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/audio_test_freertos/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/audio_test_freertos/Makefile b/examples/device/audio_test_freertos/Makefile
index 0202f631c..bd625b345 100644
--- a/examples/device/audio_test_freertos/Makefile
+++ b/examples/device/audio_test_freertos/Makefile
@@ -1,14 +1,9 @@
+RTOS = freertos
 include ../../build_system/make/make.mk
 
-FREERTOS_SRC = lib/FreeRTOS-Kernel
-FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC)
-
 INC += \
 	src \
-	src/FreeRTOSConfig \
 	$(TOP)/hw \
-	$(TOP)/$(FREERTOS_SRC)/include \
-	$(TOP)/$(FREERTOS_PORTABLE_SRC) \
 
 # Example source
 EXAMPLE_SOURCE = \
@@ -17,21 +12,4 @@ EXAMPLE_SOURCE = \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# FreeRTOS source, all files in port folder
-SRC_C += \
-	$(FREERTOS_SRC)/list.c \
-	$(FREERTOS_SRC)/queue.c \
-	$(FREERTOS_SRC)/tasks.c \
-	$(FREERTOS_SRC)/timers.c \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c))
-
-SRC_S += \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s))
-
-# Suppress FreeRTOS warnings
-CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls
-
-# FreeRTOS (lto + Os) linker issue
-LDFLAGS += -Wl,--undefined=vTaskSwitchContext
-
 include ../../build_system/make/rules.mk
diff --git a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
deleted file mode 100644
index 902a54f08..000000000
--- a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * FreeRTOS Kernel V10.0.0
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software. If you wish to use our Amazon
- * FreeRTOS name, please do so in a fair use way that does not cause confusion.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
- *
- * See http://www.freertos.org/a00110.html.
- *----------------------------------------------------------*/
-
-// skip if included from IAR assembler
-#ifndef __IASMARM__
-
-// Include MCU header
-#include "bsp/board_mcu.h"
-
-#if TUSB_MCU_VENDOR_ESPRESSIF
-  #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
-#endif
-
-// TODO fix later
-#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
-  extern u32 SystemCoreClock;
-#else
-  // FIXME cause redundant-decls warnings
-  extern uint32_t SystemCoreClock;
-#endif
-
-#endif
-
-/* Cortex M23/M33 port configuration. */
-#define configENABLE_MPU								        0
-#define configENABLE_FPU								        1
-#define configENABLE_TRUSTZONE					        0
-#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
-#define configRUN_FREERTOS_SECURE_ONLY          1
-
-#define configUSE_PREEMPTION                    1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
-#define configCPU_CLOCK_HZ                      SystemCoreClock
-#define configTICK_RATE_HZ                      ( 1000 )
-#define configMAX_PRIORITIES                    ( 5 )
-#define configMINIMAL_STACK_SIZE                ( 128 )
-#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
-#define configMAX_TASK_NAME_LEN                 16
-#define configUSE_16_BIT_TICKS                  0
-#define configIDLE_SHOULD_YIELD                 1
-#define configUSE_MUTEXES                       1
-#define configUSE_RECURSIVE_MUTEXES             1
-#define configUSE_COUNTING_SEMAPHORES           1
-#define configQUEUE_REGISTRY_SIZE               4
-#define configUSE_QUEUE_SETS                    0
-#define configUSE_TIME_SLICING                  0
-#define configUSE_NEWLIB_REENTRANT              0
-#define configENABLE_BACKWARD_COMPATIBILITY     1
-#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
-
-#define configSUPPORT_STATIC_ALLOCATION         1
-#define configSUPPORT_DYNAMIC_ALLOCATION        0
-
-/* Hook function related definitions. */
-#define configUSE_IDLE_HOOK                    0
-#define configUSE_TICK_HOOK                    0
-#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
-#define configCHECK_FOR_STACK_OVERFLOW         2
-#define configCHECK_HANDLER_INSTALLATION       0
-
-/* Run time and task stats gathering related definitions. */
-#define configGENERATE_RUN_TIME_STATS          0
-#define configUSE_TRACE_FACILITY               1 // legacy trace
-#define configUSE_STATS_FORMATTING_FUNCTIONS   0
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                  0
-#define configMAX_CO_ROUTINE_PRIORITIES        2
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS                       1
-#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
-#define configTIMER_QUEUE_LENGTH               32
-#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
-
-/* Optional functions - most linkers will remove unused functions anyway. */
-#define INCLUDE_vTaskPrioritySet               0
-#define INCLUDE_uxTaskPriorityGet              0
-#define INCLUDE_vTaskDelete                    0
-#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
-#define INCLUDE_xResumeFromISR                 0
-#define INCLUDE_vTaskDelayUntil                1
-#define INCLUDE_vTaskDelay                     1
-#define INCLUDE_xTaskGetSchedulerState         0
-#define INCLUDE_xTaskGetCurrentTaskHandle      0
-#define INCLUDE_uxTaskGetStackHighWaterMark    0
-#define INCLUDE_xTaskGetIdleTaskHandle         0
-#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
-#define INCLUDE_pcTaskGetTaskName              0
-#define INCLUDE_eTaskGetState                  0
-#define INCLUDE_xEventGroupSetBitFromISR       0
-#define INCLUDE_xTimerPendFunctionCall         0
-
-#ifdef __RX__
-/* Renesas RX series */
-#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
-#define vTickISR								              INT_Excep_CMT0_CMI0
-#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
-#define configKERNEL_INTERRUPT_PRIORITY			  1
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
-
-#else
-
-/* FreeRTOS hooks to NVIC vectors */
-#define xPortPendSVHandler    PendSV_Handler
-#define xPortSysTickHandler   SysTick_Handler
-#define vPortSVCHandler       SVC_Handler
-
-//--------------------------------------------------------------------+
-// Interrupt nesting behavior configuration.
-//--------------------------------------------------------------------+
-#if defined(__NVIC_PRIO_BITS)
-  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
-	#define configPRIO_BITS       __NVIC_PRIO_BITS
-
-#elif defined(__ECLIC_INTCTLBITS)
-  // RISC-V Bumblebee core from nuclei
-  #define configPRIO_BITS       __ECLIC_INTCTLBITS
-
-#elif defined(__IASMARM__)
-  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
-  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
-  // IAR user must update this to correct value of the target MCU
-  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
-  #define configPRIO_BITS       2
-
-#else
-  #error "FreeRTOS configPRIO_BITS to be defined"
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-#endif
-
-#endif /* __FREERTOS_CONFIG__H */
diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c
index c5143c3fc..3831be87f 100644
--- a/examples/device/audio_test_freertos/src/main.c
+++ b/examples/device/audio_test_freertos/src/main.c
@@ -38,7 +38,7 @@
 #include "bsp/board_api.h"
 #include "tusb.h"
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   // ESP-IDF need "freertos/" prefix in include path.
   // CFG_TUSB_OS_INC_PATH should be defined accordingly.
   #include "freertos/FreeRTOS.h"
@@ -132,15 +132,15 @@ int main(void)
   xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL);
 #endif
 
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-  #if !TUSB_MCU_VENDOR_ESPRESSIF
+  // only start scheduler for non-espressif mcu
+  #ifndef ESP_PLATFORM
     vTaskStartScheduler();
   #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 void app_main(void) {
   main();
 }
diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h
index 61c5cbb96..0fb2106e2 100644
--- a/examples/device/audio_test_freertos/src/tusb_config.h
+++ b/examples/device/audio_test_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@ extern "C" {
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt
index f61e1b640..6a7e68c3d 100644
--- a/examples/device/audio_test_multi_rate/CMakeLists.txt
+++ b/examples/device/audio_test_multi_rate/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/audio_test_multi_rate/CMakePresets.json b/examples/device/audio_test_multi_rate/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/audio_test_multi_rate/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c
index f9dcd1b8a..8fa902a04 100644
--- a/examples/device/audio_test_multi_rate/src/main.c
+++ b/examples/device/audio_test_multi_rate/src/main.c
@@ -85,7 +85,7 @@ audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1];
 
 
 // Audio test data
-CFG_TUSB_MEM_ALIGN uint8_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX];
+CFG_TUD_MEM_ALIGN uint8_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX];
 uint16_t startVal = 0;
 
 void led_blinking_task(void);
diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt
index 012eff095..9a604a732 100644
--- a/examples/device/board_test/CMakeLists.txt
+++ b/examples/device/board_test/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
@@ -15,18 +15,23 @@ if(FAMILY STREQUAL "espressif")
   return()
 endif()
 
-add_executable(${PROJECT})
+if (RTOS STREQUAL zephyr)
+  set(EXE_NAME app)
+else()
+  set(EXE_NAME ${PROJECT})
+  add_executable(${EXE_NAME})
+endif()
 
 # Example source
-target_sources(${PROJECT} PUBLIC
+target_sources(${EXE_NAME} PRIVATE
   ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
   )
 
 # Example include
-target_include_directories(${PROJECT} PUBLIC
+target_include_directories(${EXE_NAME} PUBLIC
   ${CMAKE_CURRENT_SOURCE_DIR}/src
   )
 
 # Configure compilation flags and libraries for the example without RTOS.
 # See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT} noos)
+family_configure_device_example(${EXE_NAME} ${RTOS})
diff --git a/examples/device/board_test/CMakePresets.json b/examples/device/board_test/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/board_test/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c
index 2269d45f1..d91a8760e 100644
--- a/examples/device/board_test/src/main.c
+++ b/examples/device/board_test/src/main.c
@@ -49,25 +49,34 @@ int main(void) {
   while (1) {
     uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED;
 
+    int ch = board_getchar();
+    if (ch > 0) {
+      board_putchar(ch);
+      #ifndef LOGGER_UART
+      board_uart_write(&ch, 1);
+      #endif
+    }
+
     // Blink and print every interval ms
     if (!(board_millis() - start_ms < interval_ms)) {
-      board_uart_write(HELLO_STR, strlen(HELLO_STR));
-
       start_ms = board_millis();
 
+      if (ch < 0) {
+        // skip if echoing
+        printf(HELLO_STR);
+
+        #ifndef LOGGER_UART
+        board_uart_write(HELLO_STR, strlen(HELLO_STR));
+        #endif
+      }
+
       board_led_write(led_state);
       led_state = 1 - led_state; // toggle
     }
-
-    // echo
-    uint8_t ch;
-    if (board_uart_read(&ch, 1) > 0) {
-      board_uart_write(&ch, 1);
-    }
   }
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 void app_main(void) {
   main();
 }
diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h
index 8ac3bc8de..81829d450 100644
--- a/examples/device/board_test/src/tusb_config.h
+++ b/examples/device/board_test/src/tusb_config.h
@@ -44,7 +44,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt
index f61e1b640..6a7e68c3d 100644
--- a/examples/device/cdc_dual_ports/CMakeLists.txt
+++ b/examples/device/cdc_dual_ports/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/cdc_dual_ports/CMakePresets.json b/examples/device/cdc_dual_ports/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/cdc_dual_ports/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt
index c2f9cb095..b07f92342 100644
--- a/examples/device/cdc_msc/CMakeLists.txt
+++ b/examples/device/cdc_msc/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 #set_property(GLOBAL PROPERTY USE_FOLDERS ON)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
@@ -16,20 +16,25 @@ if(FAMILY STREQUAL "espressif")
   return()
 endif()
 
-add_executable(${PROJECT})
+if (RTOS STREQUAL zephyr)
+  set(EXE_NAME app)
+else()
+  set(EXE_NAME ${PROJECT})
+  add_executable(${EXE_NAME})
+endif()
 
 # Example source
-target_sources(${PROJECT} PUBLIC
+target_sources(${EXE_NAME} PRIVATE
   ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
   ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
   ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
   )
 
 # Example include
-target_include_directories(${PROJECT} PUBLIC
+target_include_directories(${EXE_NAME} PUBLIC
   ${CMAKE_CURRENT_SOURCE_DIR}/src
   )
 
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT} noos)
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_device_example(${EXE_NAME} ${RTOS})
diff --git a/examples/device/cdc_msc/CMakePresets.json b/examples/device/cdc_msc/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/cdc_msc/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/cdc_msc/prj.conf b/examples/device/cdc_msc/prj.conf
new file mode 100644
index 000000000..2f5139d9d
--- /dev/null
+++ b/examples/device/cdc_msc/prj.conf
@@ -0,0 +1,6 @@
+CONFIG_GPIO=y
+CONFIG_FPU=y
+CONFIG_NO_OPTIMIZATIONS=y
+CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_NRFX_POWER=y
+CONFIG_NRFX_UARTE0=y
diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c
index d2f8628f1..458681f58 100644
--- a/examples/device/cdc_msc/src/msc_disk.c
+++ b/examples/device/cdc_msc/src/msc_disk.c
@@ -40,17 +40,15 @@ static bool ejected = false;
 If you find any bugs or get any questions, feel free to file an\r\n\
 issue at github.com/hathach/tinyusb"
 
-enum
-{
-  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
+enum {
+  DISK_BLOCK_NUM = 16,// 8KB is the smallest size that windows allow to mount
   DISK_BLOCK_SIZE = 512
 };
 
 #ifdef CFG_EXAMPLE_MSC_READONLY
 const
 #endif
-uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
+uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = {
   //------------- Block0: Boot Sector -------------//
   // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
   // sector_per_cluster = 1; reserved_sectors = 1;
@@ -59,60 +57,59 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
   // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
   // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
   // FAT magic code at offset 510-511
-  {
-      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
-      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
-      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
+{
+    0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
+    0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T', 'i', 'n', 'y', 'U',
+    'S', 'B', ' ', 'M', 'S', 'C', 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
 
-      // Zero up to 2 last bytes of FAT magic code
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    // Zero up to 2 last bytes of FAT magic code
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
-  },
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA},
 
   //------------- Block1: FAT12 Table -------------//
-  {
-      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
+{
+      0xF8, 0xFF, 0xFF, 0xFF, 0x0F// // first 2 entries must be F8FF, third entry is cluster end of readme file
   },
 
   //------------- Block2: Root Directory -------------//
-  {
-      // first entry is volume label
-      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      // second entry is readme file
-      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
-      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
-      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
+{
+    // first entry is volume label
+    'T', 'i', 'n', 'y', 'U', 'S', 'B', ' ', 'M', 'S', 'C', 0x08, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    // second entry is readme file
+    'R', 'E', 'A', 'D', 'M', 'E', ' ', ' ', 'T', 'X', 'T', 0x20, 0x00, 0xC6, 0x52, 0x6D,
+    0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
+    sizeof(README_CONTENTS) - 1, 0x00, 0x00, 0x00// readme's files size (4 Bytes)
   },
 
   //------------- Block3: Readme Content -------------//
@@ -121,23 +118,21 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
 
 // Invoked when received SCSI_CMD_INQUIRY
 // Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
-{
+void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) {
   (void) lun;
 
   const char vid[] = "TinyUSB";
   const char pid[] = "Mass Storage";
   const char rev[] = "1.0";
 
-  memcpy(vendor_id  , vid, strlen(vid));
-  memcpy(product_id , pid, strlen(pid));
+  memcpy(vendor_id, vid, strlen(vid));
+  memcpy(product_id, pid, strlen(pid));
   memcpy(product_rev, rev, strlen(rev));
 }
 
 // Invoked when received Test Unit Ready command.
 // return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun)
-{
+bool tud_msc_test_unit_ready_cb(uint8_t lun) {
   (void) lun;
 
   // RAM disk is ready until ejected
@@ -152,29 +147,24 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun)
 
 // Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
 // Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
-{
+void tud_msc_capacity_cb(uint8_t lun, uint32_t *block_count, uint16_t *block_size) {
   (void) lun;
 
   *block_count = DISK_BLOCK_NUM;
-  *block_size  = DISK_BLOCK_SIZE;
+  *block_size = DISK_BLOCK_SIZE;
 }
 
 // Invoked when received Start Stop Unit command
 // - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
 // - Start = 1 : active mode, if load_eject = 1 : load disk storage
-bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
-{
+bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) {
   (void) lun;
   (void) power_condition;
 
-  if ( load_eject )
-  {
-    if (start)
-    {
+  if (load_eject) {
+    if (start) {
       // load disk storage
-    }else
-    {
+    } else {
       // unload disk storage
       ejected = true;
     }
@@ -185,45 +175,51 @@ bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, boo
 
 // Callback invoked when received READ10 command.
 // Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
-int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
-{
+int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void *buffer, uint32_t bufsize) {
   (void) lun;
 
   // out of ramdisk
-  if ( lba >= DISK_BLOCK_NUM ) return -1;
+  if (lba >= DISK_BLOCK_NUM) {
+    return -1;
+  }
+
+  // Check for overflow of offset + bufsize
+  if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) {
+    return -1;
+  }
 
-  uint8_t const* addr = msc_disk[lba] + offset;
+  uint8_t const *addr = msc_disk[lba] + offset;
   memcpy(buffer, addr, bufsize);
 
   return (int32_t) bufsize;
 }
 
-bool tud_msc_is_writable_cb (uint8_t lun)
-{
+bool tud_msc_is_writable_cb(uint8_t lun) {
   (void) lun;
 
-#ifdef CFG_EXAMPLE_MSC_READONLY
+  #ifdef CFG_EXAMPLE_MSC_READONLY
   return false;
-#else
+  #else
   return true;
-#endif
+  #endif
 }
 
 // Callback invoked when received WRITE10 command.
 // Process data in buffer to disk's storage and return number of written bytes
-int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
-{
+int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t *buffer, uint32_t bufsize) {
   (void) lun;
 
   // out of ramdisk
-  if ( lba >= DISK_BLOCK_NUM ) return -1;
+  if (lba >= DISK_BLOCK_NUM) return -1;
 
-#ifndef CFG_EXAMPLE_MSC_READONLY
-  uint8_t* addr = msc_disk[lba] + offset;
+  #ifndef CFG_EXAMPLE_MSC_READONLY
+  uint8_t *addr = msc_disk[lba] + offset;
   memcpy(addr, buffer, bufsize);
-#else
-  (void) lba; (void) offset; (void) buffer;
-#endif
+  #else
+  (void) lba;
+  (void) offset;
+  (void) buffer;
+  #endif
 
   return (int32_t) bufsize;
 }
@@ -231,42 +227,18 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t*
 // Callback invoked when received an SCSI command not in built-in list below
 // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
 // - READ10 and WRITE10 has their own callbacks
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
-{
-  // read10 & write10 has their own callback and MUST not be handled here
-
-  void const* response = NULL;
-  int32_t resplen = 0;
+int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, uint16_t bufsize) {
+  (void) buffer;
+  (void) bufsize;
 
-  // most scsi handled is input
-  bool in_xfer = true;
-
-  switch (scsi_cmd[0])
-  {
+  switch (scsi_cmd[0]) {
     default:
       // Set Sense = Invalid Command Operation
       tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
 
       // negative means error -> tinyusb could stall and/or response with failed status
-      resplen = -1;
-    break;
-  }
-
-  // return resplen must not larger than bufsize
-  if ( resplen > bufsize ) resplen = bufsize;
-
-  if ( response && (resplen > 0) )
-  {
-    if(in_xfer)
-    {
-      memcpy(buffer, response, (size_t) resplen);
-    }else
-    {
-      // SCSI output
-    }
+      return -1;
   }
-
-  return (int32_t) resplen;
 }
 
 #endif
diff --git a/examples/device/cdc_msc_freertos/CMakeLists.txt b/examples/device/cdc_msc_freertos/CMakeLists.txt
index 32a9e2930..f7636a07a 100644
--- a/examples/device/cdc_msc_freertos/CMakeLists.txt
+++ b/examples/device/cdc_msc_freertos/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/cdc_msc_freertos/CMakePresets.json b/examples/device/cdc_msc_freertos/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/cdc_msc_freertos/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile
index c90922b0c..10cff57a0 100644
--- a/examples/device/cdc_msc_freertos/Makefile
+++ b/examples/device/cdc_msc_freertos/Makefile
@@ -1,14 +1,9 @@
+RTOS = freertos
 include ../../build_system/make/make.mk
 
-FREERTOS_SRC = lib/FreeRTOS-Kernel
-FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC)
-
 INC += \
 	src \
-	src/FreeRTOSConfig \
 	$(TOP)/hw \
-	$(TOP)/$(FREERTOS_SRC)/include \
-	$(TOP)/$(FREERTOS_PORTABLE_SRC) \
 
 # Example source
 EXAMPLE_SOURCE = \
@@ -18,28 +13,4 @@ EXAMPLE_SOURCE = \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# FreeRTOS source, all files in port folder
-SRC_C += \
-	$(FREERTOS_SRC)/list.c \
-	$(FREERTOS_SRC)/queue.c \
-	$(FREERTOS_SRC)/tasks.c \
-	$(FREERTOS_SRC)/timers.c \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c))
-
-SRC_S += \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s))
-
-# include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1
-# SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c
-# CFLAGS += -Wno-error=sign-compare
-
-# Suppress FreeRTOSConfig.h warnings
-CFLAGS_GCC += -Wno-error=redundant-decls
-
-# Suppress FreeRTOS source warnings
-CFLAGS_GCC += -Wno-error=cast-qual
-
-# FreeRTOS (lto + Os) linker issue
-LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext
-
 include ../../build_system/make/rules.mk
diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
deleted file mode 100644
index 902a54f08..000000000
--- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * FreeRTOS Kernel V10.0.0
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software. If you wish to use our Amazon
- * FreeRTOS name, please do so in a fair use way that does not cause confusion.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
- *
- * See http://www.freertos.org/a00110.html.
- *----------------------------------------------------------*/
-
-// skip if included from IAR assembler
-#ifndef __IASMARM__
-
-// Include MCU header
-#include "bsp/board_mcu.h"
-
-#if TUSB_MCU_VENDOR_ESPRESSIF
-  #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
-#endif
-
-// TODO fix later
-#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
-  extern u32 SystemCoreClock;
-#else
-  // FIXME cause redundant-decls warnings
-  extern uint32_t SystemCoreClock;
-#endif
-
-#endif
-
-/* Cortex M23/M33 port configuration. */
-#define configENABLE_MPU								        0
-#define configENABLE_FPU								        1
-#define configENABLE_TRUSTZONE					        0
-#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
-#define configRUN_FREERTOS_SECURE_ONLY          1
-
-#define configUSE_PREEMPTION                    1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
-#define configCPU_CLOCK_HZ                      SystemCoreClock
-#define configTICK_RATE_HZ                      ( 1000 )
-#define configMAX_PRIORITIES                    ( 5 )
-#define configMINIMAL_STACK_SIZE                ( 128 )
-#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
-#define configMAX_TASK_NAME_LEN                 16
-#define configUSE_16_BIT_TICKS                  0
-#define configIDLE_SHOULD_YIELD                 1
-#define configUSE_MUTEXES                       1
-#define configUSE_RECURSIVE_MUTEXES             1
-#define configUSE_COUNTING_SEMAPHORES           1
-#define configQUEUE_REGISTRY_SIZE               4
-#define configUSE_QUEUE_SETS                    0
-#define configUSE_TIME_SLICING                  0
-#define configUSE_NEWLIB_REENTRANT              0
-#define configENABLE_BACKWARD_COMPATIBILITY     1
-#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
-
-#define configSUPPORT_STATIC_ALLOCATION         1
-#define configSUPPORT_DYNAMIC_ALLOCATION        0
-
-/* Hook function related definitions. */
-#define configUSE_IDLE_HOOK                    0
-#define configUSE_TICK_HOOK                    0
-#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
-#define configCHECK_FOR_STACK_OVERFLOW         2
-#define configCHECK_HANDLER_INSTALLATION       0
-
-/* Run time and task stats gathering related definitions. */
-#define configGENERATE_RUN_TIME_STATS          0
-#define configUSE_TRACE_FACILITY               1 // legacy trace
-#define configUSE_STATS_FORMATTING_FUNCTIONS   0
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                  0
-#define configMAX_CO_ROUTINE_PRIORITIES        2
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS                       1
-#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
-#define configTIMER_QUEUE_LENGTH               32
-#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
-
-/* Optional functions - most linkers will remove unused functions anyway. */
-#define INCLUDE_vTaskPrioritySet               0
-#define INCLUDE_uxTaskPriorityGet              0
-#define INCLUDE_vTaskDelete                    0
-#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
-#define INCLUDE_xResumeFromISR                 0
-#define INCLUDE_vTaskDelayUntil                1
-#define INCLUDE_vTaskDelay                     1
-#define INCLUDE_xTaskGetSchedulerState         0
-#define INCLUDE_xTaskGetCurrentTaskHandle      0
-#define INCLUDE_uxTaskGetStackHighWaterMark    0
-#define INCLUDE_xTaskGetIdleTaskHandle         0
-#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
-#define INCLUDE_pcTaskGetTaskName              0
-#define INCLUDE_eTaskGetState                  0
-#define INCLUDE_xEventGroupSetBitFromISR       0
-#define INCLUDE_xTimerPendFunctionCall         0
-
-#ifdef __RX__
-/* Renesas RX series */
-#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
-#define vTickISR								              INT_Excep_CMT0_CMI0
-#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
-#define configKERNEL_INTERRUPT_PRIORITY			  1
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
-
-#else
-
-/* FreeRTOS hooks to NVIC vectors */
-#define xPortPendSVHandler    PendSV_Handler
-#define xPortSysTickHandler   SysTick_Handler
-#define vPortSVCHandler       SVC_Handler
-
-//--------------------------------------------------------------------+
-// Interrupt nesting behavior configuration.
-//--------------------------------------------------------------------+
-#if defined(__NVIC_PRIO_BITS)
-  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
-	#define configPRIO_BITS       __NVIC_PRIO_BITS
-
-#elif defined(__ECLIC_INTCTLBITS)
-  // RISC-V Bumblebee core from nuclei
-  #define configPRIO_BITS       __ECLIC_INTCTLBITS
-
-#elif defined(__IASMARM__)
-  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
-  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
-  // IAR user must update this to correct value of the target MCU
-  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
-  #define configPRIO_BITS       2
-
-#else
-  #error "FreeRTOS configPRIO_BITS to be defined"
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-#endif
-
-#endif /* __FREERTOS_CONFIG__H */
diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c
index c51e8ea81..6fe964153 100644
--- a/examples/device/cdc_msc_freertos/src/main.c
+++ b/examples/device/cdc_msc_freertos/src/main.c
@@ -30,7 +30,7 @@
 #include "bsp/board_api.h"
 #include "tusb.h"
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   #define USBD_STACK_SIZE     4096
 #else
   // Increase stack size when debug log is enabled
@@ -72,7 +72,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
 static void usb_device_task(void *param);
 void led_blinking_task(void* param);
 void cdc_task(void *params);
-
+extern void msc_disk_init(void);
 //--------------------------------------------------------------------+
 // Main
 //--------------------------------------------------------------------+
@@ -91,15 +91,15 @@ int main(void) {
   xTaskCreate(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL);
 #endif
 
-#if !TUSB_MCU_VENDOR_ESPRESSIF
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
+#ifndef ESP_PLATFORM
+  // only start scheduler for non-espressif mcu
   vTaskStartScheduler();
 #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 void app_main(void) {
   main();
 }
@@ -123,6 +123,7 @@ static void usb_device_task(void *param) {
     board_init_after_tusb();
   }
 
+  msc_disk_init();
   // RTOS forever loop
   while (1) {
     // put this thread to waiting state until there is new events
diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c
index d2f8628f1..d1ff2f71b 100644
--- a/examples/device/cdc_msc_freertos/src/msc_disk.c
+++ b/examples/device/cdc_msc_freertos/src/msc_disk.c
@@ -28,6 +28,37 @@
 
 #if CFG_TUD_MSC
 
+// Use async IO in example or not
+#define CFG_EXAMPLE_MSC_ASYNC_IO    1
+
+// Simulate read/write operation delay
+#define CFG_EXAMPLE_MSC_IO_DELAY_MS 0
+
+#if CFG_EXAMPLE_MSC_ASYNC_IO
+#define IO_STACK_SIZE      configMINIMAL_STACK_SIZE
+
+typedef struct {
+  uint8_t lun;
+  bool is_read;
+  uint32_t lba;
+  uint32_t offset;
+  void* buffer;
+  uint32_t bufsize;
+} io_ops_t;
+
+QueueHandle_t io_queue;
+#if configSUPPORT_STATIC_ALLOCATION
+uint8_t io_queue_buf[sizeof(io_ops_t)];
+StaticQueue_t io_queue_static;
+StackType_t  io_stack[IO_STACK_SIZE];
+StaticTask_t io_taskdef;
+#endif
+
+static void io_task(void *params);
+#endif
+
+void msc_disk_init(void);
+
 // whether host does safe-eject
 static bool ejected = false;
 
@@ -40,8 +71,7 @@ static bool ejected = false;
 If you find any bugs or get any questions, feel free to file an\r\n\
 issue at github.com/hathach/tinyusb"
 
-enum
-{
+enum {
   DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
   DISK_BLOCK_SIZE = 512
 };
@@ -119,16 +149,52 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
   README_CONTENTS
 };
 
+#if CFG_EXAMPLE_MSC_ASYNC_IO
+void msc_disk_init() {
+
+#if configSUPPORT_STATIC_ALLOCATION
+  io_queue = xQueueCreateStatic(1, sizeof(io_ops_t), io_queue_buf, &io_queue_static);
+  xTaskCreateStatic(io_task, "io", IO_STACK_SIZE, NULL, 2, io_stack, &io_taskdef);
+#else
+  io_queue = xQueueCreate(1, sizeof(io_ops_t));
+  xTaskCreate(io_task, "io", IO_STACK_SIZE, NULL, 2, NULL);
+#endif
+}
+
+static void io_task(void *params) {
+  (void) params;
+  io_ops_t io_ops;
+  while (1) {
+    if (xQueueReceive(io_queue, &io_ops, portMAX_DELAY)) {
+      const uint8_t* addr = msc_disk[io_ops.lba] + io_ops.offset;
+      int32_t nbytes = io_ops.bufsize;
+      if (io_ops.is_read) {
+        memcpy(io_ops.buffer, addr, io_ops.bufsize);
+      } else {
+#ifndef CFG_EXAMPLE_MSC_READONLY
+        memcpy((uint8_t*) addr, io_ops.buffer, io_ops.bufsize);
+#else
+        nbytes = -1; // failed to write
+#endif
+      }
+
+      tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS);
+      tud_msc_async_io_done(nbytes, false);
+    }
+  }
+}
+
+#else
+void msc_disk_init() {}
+#endif
+
 // Invoked when received SCSI_CMD_INQUIRY
 // Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
-{
+void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) {
   (void) lun;
-
   const char vid[] = "TinyUSB";
   const char pid[] = "Mass Storage";
   const char rev[] = "1.0";
-
   memcpy(vendor_id  , vid, strlen(vid));
   memcpy(product_id , pid, strlen(pid));
   memcpy(product_rev, rev, strlen(rev));
@@ -136,8 +202,7 @@ void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16
 
 // Invoked when received Test Unit Ready command.
 // return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun)
-{
+bool tud_msc_test_unit_ready_cb(uint8_t lun) {
   (void) lun;
 
   // RAM disk is ready until ejected
@@ -152,10 +217,8 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun)
 
 // Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
 // Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
-{
+void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) {
   (void) lun;
-
   *block_count = DISK_BLOCK_NUM;
   *block_size  = DISK_BLOCK_SIZE;
 }
@@ -163,18 +226,14 @@ void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_siz
 // Invoked when received Start Stop Unit command
 // - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
 // - Start = 1 : active mode, if load_eject = 1 : load disk storage
-bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
-{
+bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) {
   (void) lun;
   (void) power_condition;
 
-  if ( load_eject )
-  {
-    if (start)
-    {
+  if (load_eject) {
+    if (start) {
       // load disk storage
-    }else
-    {
+    } else {
       // unload disk storage
       ejected = true;
     }
@@ -185,83 +244,107 @@ bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, boo
 
 // Callback invoked when received READ10 command.
 // Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
-int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
-{
+int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) {
   (void) lun;
 
   // out of ramdisk
-  if ( lba >= DISK_BLOCK_NUM ) return -1;
+  if (lba >= DISK_BLOCK_NUM) {
+    return TUD_MSC_RET_ERROR;
+  }
 
-  uint8_t const* addr = msc_disk[lba] + offset;
-  memcpy(buffer, addr, bufsize);
+  // Check for overflow of offset + bufsize
+  if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) {
+    return TUD_MSC_RET_ERROR;
+  }
 
-  return (int32_t) bufsize;
+  #if CFG_EXAMPLE_MSC_ASYNC_IO
+  io_ops_t io_ops = {.is_read = true, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize};
+
+  // Send IO operation to IO task
+  TU_ASSERT(xQueueSend(io_queue, &io_ops, 0) == pdPASS);
+
+  return TUD_MSC_RET_ASYNC;
+  #else
+  uint8_t const *addr = msc_disk[lba] + offset;
+  memcpy(buffer, addr, bufsize);
+  return bufsize;
+  #endif
 }
 
-bool tud_msc_is_writable_cb (uint8_t lun)
-{
+bool tud_msc_is_writable_cb (uint8_t lun) {
   (void) lun;
 
-#ifdef CFG_EXAMPLE_MSC_READONLY
+  #ifdef CFG_EXAMPLE_MSC_READONLY
   return false;
-#else
+  #else
   return true;
-#endif
+  #endif
 }
 
 // Callback invoked when received WRITE10 command.
 // Process data in buffer to disk's storage and return number of written bytes
-int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
-{
+int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) {
+  // out of ramdisk
+  if (lba >= DISK_BLOCK_NUM) {
+    return TUD_MSC_RET_ERROR;
+  }
+
+  // Check for overflow of offset + bufsize
+  if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) {
+    return TUD_MSC_RET_ERROR;
+  }
+
+  #ifdef CFG_EXAMPLE_MSC_READONLY
   (void) lun;
+  (void) buffer;
+  return bufsize;
+  #endif
 
-  // out of ramdisk
-  if ( lba >= DISK_BLOCK_NUM ) return -1;
+  #if CFG_EXAMPLE_MSC_ASYNC_IO
+  io_ops_t io_ops = {.is_read = false, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize};
 
-#ifndef CFG_EXAMPLE_MSC_READONLY
-  uint8_t* addr = msc_disk[lba] + offset;
+  // Send IO operation to IO task
+  TU_ASSERT(xQueueSend(io_queue, &io_ops, 0) == pdPASS);
+
+  return TUD_MSC_RET_ASYNC;
+  #else
+  uint8_t *addr = msc_disk[lba] + offset;
   memcpy(addr, buffer, bufsize);
-#else
-  (void) lba; (void) offset; (void) buffer;
-#endif
+  tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS);
 
-  return (int32_t) bufsize;
+  return bufsize;
+  #endif
 }
 
 // Callback invoked when received an SCSI command not in built-in list below
 // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
 // - READ10 and WRITE10 has their own callbacks
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
-{
+int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) {
   // read10 & write10 has their own callback and MUST not be handled here
 
-  void const* response = NULL;
+  void const *response = NULL;
   int32_t resplen = 0;
 
   // most scsi handled is input
   bool in_xfer = true;
 
-  switch (scsi_cmd[0])
-  {
+  switch (scsi_cmd[0]) {
     default:
       // Set Sense = Invalid Command Operation
       tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
 
       // negative means error -> tinyusb could stall and/or response with failed status
       resplen = -1;
-    break;
+      break;
   }
 
   // return resplen must not larger than bufsize
-  if ( resplen > bufsize ) resplen = bufsize;
+  if (resplen > bufsize) { resplen = bufsize; }
 
-  if ( response && (resplen > 0) )
-  {
-    if(in_xfer)
-    {
+  if (response && (resplen > 0)) {
+    if (in_xfer) {
       memcpy(buffer, response, (size_t) resplen);
-    }else
-    {
+    } else {
       // SCSI output
     }
   }
diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h
index c3f2f7fb5..71a0e985a 100644
--- a/examples/device/cdc_msc_freertos/src/tusb_config.h
+++ b/examples/device/cdc_msc_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/cdc_uac2/CMakeLists.txt b/examples/device/cdc_uac2/CMakeLists.txt
index 64e4374e9..c8c797637 100644
--- a/examples/device/cdc_uac2/CMakeLists.txt
+++ b/examples/device/cdc_uac2/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/cdc_uac2/CMakePresets.json b/examples/device/cdc_uac2/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/cdc_uac2/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt
index a01eb3456..3da8ee3df 100644
--- a/examples/device/dfu/CMakeLists.txt
+++ b/examples/device/dfu/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/dfu/CMakePresets.json b/examples/device/dfu/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/dfu/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt
index a01eb3456..3da8ee3df 100644
--- a/examples/device/dfu_runtime/CMakeLists.txt
+++ b/examples/device/dfu_runtime/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/dfu_runtime/CMakePresets.json b/examples/device/dfu_runtime/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/dfu_runtime/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt
index 2b20d2234..8a62d6ba2 100644
--- a/examples/device/dynamic_configuration/CMakeLists.txt
+++ b/examples/device/dynamic_configuration/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/dynamic_configuration/CMakePresets.json b/examples/device/dynamic_configuration/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/dynamic_configuration/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt
index a01eb3456..3da8ee3df 100644
--- a/examples/device/hid_boot_interface/CMakeLists.txt
+++ b/examples/device/hid_boot_interface/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/hid_boot_interface/CMakePresets.json b/examples/device/hid_boot_interface/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/hid_boot_interface/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt
index a01eb3456..3da8ee3df 100644
--- a/examples/device/hid_composite/CMakeLists.txt
+++ b/examples/device/hid_composite/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/hid_composite/CMakePresets.json b/examples/device/hid_composite/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/hid_composite/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c
index 5302af3b8..a58107b6f 100644
--- a/examples/device/hid_composite/src/main.c
+++ b/examples/device/hid_composite/src/main.c
@@ -197,11 +197,43 @@ static void send_hid_report(uint8_t report_id, uint32_t btn)
       }
     }
     break;
-
     default: break;
   }
 }
 
+/* use this to send stylus touch signal through USB. */
+static void send_stylus_touch(uint16_t x, uint16_t y, bool state)
+{
+  // skip if hid is not ready yet
+  if ( !tud_hid_ready() ) return;
+
+  static bool has_stylus_pen = false;
+
+  hid_stylus_report_t report =
+  {
+    .attr = 0,
+    .x = 0,
+    .y = 0
+  };
+
+  report.x = x;
+  report.y = y;
+
+  if (state)
+  {
+    report.attr = STYLUS_ATTR_TIP_SWITCH | STYLUS_ATTR_IN_RANGE;
+    tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report));
+
+    has_stylus_pen = true;
+  }else
+  {
+    report.attr = 0;
+    if (has_stylus_pen) tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report));
+    has_stylus_pen = false;
+  }
+
+}
+
 // Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..)
 // tud_hid_report_complete_cb() is used to send the next report after previous one is complete
 void hid_task(void)
@@ -209,6 +241,14 @@ void hid_task(void)
   // Poll every 10ms
   const uint32_t interval_ms = 10;
   static uint32_t start_ms = 0;
+  static uint32_t touch_ms = 0;
+  static bool touch_state = false;
+
+  if (board_millis() - touch_ms < 100) {
+    touch_ms = board_millis();
+    send_stylus_touch(0, 0, touch_state = !touch_state);
+    return;
+  }
 
   if ( board_millis() - start_ms < interval_ms) return; // not enough time
   start_ms += interval_ms;
diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c
index e174db46d..15c6e1f73 100644
--- a/examples/device/hid_composite/src/usb_descriptors.c
+++ b/examples/device/hid_composite/src/usb_descriptors.c
@@ -79,6 +79,7 @@ uint8_t const desc_hid_report[] =
 {
   TUD_HID_REPORT_DESC_KEYBOARD( HID_REPORT_ID(REPORT_ID_KEYBOARD         )),
   TUD_HID_REPORT_DESC_MOUSE   ( HID_REPORT_ID(REPORT_ID_MOUSE            )),
+  TUD_HID_REPORT_DESC_STYLUS_PEN( HID_REPORT_ID(REPORT_ID_STYLUS_PEN     )),
   TUD_HID_REPORT_DESC_CONSUMER( HID_REPORT_ID(REPORT_ID_CONSUMER_CONTROL )),
   TUD_HID_REPORT_DESC_GAMEPAD ( HID_REPORT_ID(REPORT_ID_GAMEPAD          ))
 };
diff --git a/examples/device/hid_composite/src/usb_descriptors.h b/examples/device/hid_composite/src/usb_descriptors.h
index e733d31dd..18d31172b 100644
--- a/examples/device/hid_composite/src/usb_descriptors.h
+++ b/examples/device/hid_composite/src/usb_descriptors.h
@@ -29,6 +29,7 @@ enum
 {
   REPORT_ID_KEYBOARD = 1,
   REPORT_ID_MOUSE,
+  REPORT_ID_STYLUS_PEN,
   REPORT_ID_CONSUMER_CONTROL,
   REPORT_ID_GAMEPAD,
   REPORT_ID_COUNT
diff --git a/examples/device/hid_composite_freertos/CMakeLists.txt b/examples/device/hid_composite_freertos/CMakeLists.txt
index 33f3b915f..6ce9e72fe 100644
--- a/examples/device/hid_composite_freertos/CMakeLists.txt
+++ b/examples/device/hid_composite_freertos/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/hid_composite_freertos/CMakePresets.json b/examples/device/hid_composite_freertos/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/hid_composite_freertos/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile
index 38d842b3a..bd625b345 100644
--- a/examples/device/hid_composite_freertos/Makefile
+++ b/examples/device/hid_composite_freertos/Makefile
@@ -1,16 +1,9 @@
-DEPS_SUBMODULES += lib/FreeRTOS-Kernel
-
+RTOS = freertos
 include ../../build_system/make/make.mk
 
-FREERTOS_SRC = lib/FreeRTOS-Kernel
-FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC)
-
 INC += \
 	src \
-	src/FreeRTOSConfig \
 	$(TOP)/hw \
-	$(TOP)/$(FREERTOS_SRC)/include \
-	$(TOP)/$(FREERTOS_PORTABLE_SRC)
 
 # Example source
 EXAMPLE_SOURCE = \
@@ -19,28 +12,4 @@ EXAMPLE_SOURCE = \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# FreeRTOS source, all files in port folder
-SRC_C += \
-	$(FREERTOS_SRC)/list.c \
-	$(FREERTOS_SRC)/queue.c \
-	$(FREERTOS_SRC)/tasks.c \
-	$(FREERTOS_SRC)/timers.c \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c))
-
-SRC_S += \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s))
-
-# include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1
-# SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c
-# CFLAGS += -Wno-error=sign-compare
-
-# Suppress FreeRTOSConfig.h warnings
-CFLAGS_GCC += -Wno-error=redundant-decls
-
-# Suppress FreeRTOS source warnings
-CFLAGS_GCC += -Wno-error=cast-qual
-
-# FreeRTOS (lto + Os) linker issue
-LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext
-
 include ../../build_system/make/rules.mk
diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
deleted file mode 100644
index 902a54f08..000000000
--- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * FreeRTOS Kernel V10.0.0
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software. If you wish to use our Amazon
- * FreeRTOS name, please do so in a fair use way that does not cause confusion.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
- *
- * See http://www.freertos.org/a00110.html.
- *----------------------------------------------------------*/
-
-// skip if included from IAR assembler
-#ifndef __IASMARM__
-
-// Include MCU header
-#include "bsp/board_mcu.h"
-
-#if TUSB_MCU_VENDOR_ESPRESSIF
-  #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
-#endif
-
-// TODO fix later
-#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
-  extern u32 SystemCoreClock;
-#else
-  // FIXME cause redundant-decls warnings
-  extern uint32_t SystemCoreClock;
-#endif
-
-#endif
-
-/* Cortex M23/M33 port configuration. */
-#define configENABLE_MPU								        0
-#define configENABLE_FPU								        1
-#define configENABLE_TRUSTZONE					        0
-#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
-#define configRUN_FREERTOS_SECURE_ONLY          1
-
-#define configUSE_PREEMPTION                    1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
-#define configCPU_CLOCK_HZ                      SystemCoreClock
-#define configTICK_RATE_HZ                      ( 1000 )
-#define configMAX_PRIORITIES                    ( 5 )
-#define configMINIMAL_STACK_SIZE                ( 128 )
-#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
-#define configMAX_TASK_NAME_LEN                 16
-#define configUSE_16_BIT_TICKS                  0
-#define configIDLE_SHOULD_YIELD                 1
-#define configUSE_MUTEXES                       1
-#define configUSE_RECURSIVE_MUTEXES             1
-#define configUSE_COUNTING_SEMAPHORES           1
-#define configQUEUE_REGISTRY_SIZE               4
-#define configUSE_QUEUE_SETS                    0
-#define configUSE_TIME_SLICING                  0
-#define configUSE_NEWLIB_REENTRANT              0
-#define configENABLE_BACKWARD_COMPATIBILITY     1
-#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
-
-#define configSUPPORT_STATIC_ALLOCATION         1
-#define configSUPPORT_DYNAMIC_ALLOCATION        0
-
-/* Hook function related definitions. */
-#define configUSE_IDLE_HOOK                    0
-#define configUSE_TICK_HOOK                    0
-#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
-#define configCHECK_FOR_STACK_OVERFLOW         2
-#define configCHECK_HANDLER_INSTALLATION       0
-
-/* Run time and task stats gathering related definitions. */
-#define configGENERATE_RUN_TIME_STATS          0
-#define configUSE_TRACE_FACILITY               1 // legacy trace
-#define configUSE_STATS_FORMATTING_FUNCTIONS   0
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                  0
-#define configMAX_CO_ROUTINE_PRIORITIES        2
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS                       1
-#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
-#define configTIMER_QUEUE_LENGTH               32
-#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
-
-/* Optional functions - most linkers will remove unused functions anyway. */
-#define INCLUDE_vTaskPrioritySet               0
-#define INCLUDE_uxTaskPriorityGet              0
-#define INCLUDE_vTaskDelete                    0
-#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
-#define INCLUDE_xResumeFromISR                 0
-#define INCLUDE_vTaskDelayUntil                1
-#define INCLUDE_vTaskDelay                     1
-#define INCLUDE_xTaskGetSchedulerState         0
-#define INCLUDE_xTaskGetCurrentTaskHandle      0
-#define INCLUDE_uxTaskGetStackHighWaterMark    0
-#define INCLUDE_xTaskGetIdleTaskHandle         0
-#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
-#define INCLUDE_pcTaskGetTaskName              0
-#define INCLUDE_eTaskGetState                  0
-#define INCLUDE_xEventGroupSetBitFromISR       0
-#define INCLUDE_xTimerPendFunctionCall         0
-
-#ifdef __RX__
-/* Renesas RX series */
-#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
-#define vTickISR								              INT_Excep_CMT0_CMI0
-#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
-#define configKERNEL_INTERRUPT_PRIORITY			  1
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
-
-#else
-
-/* FreeRTOS hooks to NVIC vectors */
-#define xPortPendSVHandler    PendSV_Handler
-#define xPortSysTickHandler   SysTick_Handler
-#define vPortSVCHandler       SVC_Handler
-
-//--------------------------------------------------------------------+
-// Interrupt nesting behavior configuration.
-//--------------------------------------------------------------------+
-#if defined(__NVIC_PRIO_BITS)
-  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
-	#define configPRIO_BITS       __NVIC_PRIO_BITS
-
-#elif defined(__ECLIC_INTCTLBITS)
-  // RISC-V Bumblebee core from nuclei
-  #define configPRIO_BITS       __ECLIC_INTCTLBITS
-
-#elif defined(__IASMARM__)
-  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
-  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
-  // IAR user must update this to correct value of the target MCU
-  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
-  #define configPRIO_BITS       2
-
-#else
-  #error "FreeRTOS configPRIO_BITS to be defined"
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-#endif
-
-#endif /* __FREERTOS_CONFIG__H */
diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c
index 30c0331ef..3f5e8a91c 100644
--- a/examples/device/hid_composite_freertos/src/main.c
+++ b/examples/device/hid_composite_freertos/src/main.c
@@ -31,7 +31,7 @@
 #include "tusb.h"
 #include "usb_descriptors.h"
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   // ESP-IDF need "freertos/" prefix in include path.
   // CFG_TUSB_OS_INC_PATH should be defined accordingly.
   #include "freertos/FreeRTOS.h"
@@ -112,17 +112,16 @@ int main(void)
 
   xTimerStart(blinky_tm, 0);
 
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-#if !TUSB_MCU_VENDOR_ESPRESSIF
+  // only start scheduler for non-espressif mcu
+#ifndef ESP_PLATFORM
   vTaskStartScheduler();
 #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
-void app_main(void)
-{
+#ifdef ESP_PLATFORM
+void app_main(void) {
   main();
 }
 #endif
diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h
index 6ec38b95c..b28033a0c 100644
--- a/examples/device/hid_composite_freertos/src/tusb_config.h
+++ b/examples/device/hid_composite_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt
index a01eb3456..3da8ee3df 100644
--- a/examples/device/hid_generic_inout/CMakeLists.txt
+++ b/examples/device/hid_generic_inout/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/hid_generic_inout/CMakePresets.json b/examples/device/hid_generic_inout/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/hid_generic_inout/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt
index a01eb3456..3da8ee3df 100644
--- a/examples/device/hid_multiple_interface/CMakeLists.txt
+++ b/examples/device/hid_multiple_interface/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/hid_multiple_interface/CMakePresets.json b/examples/device/hid_multiple_interface/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/hid_multiple_interface/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt
index f61e1b640..6a7e68c3d 100644
--- a/examples/device/midi_test/CMakeLists.txt
+++ b/examples/device/midi_test/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/midi_test/CMakePresets.json b/examples/device/midi_test/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/midi_test/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/midi_test_freertos/CMakeLists.txt b/examples/device/midi_test_freertos/CMakeLists.txt
index 33f3b915f..6ce9e72fe 100644
--- a/examples/device/midi_test_freertos/CMakeLists.txt
+++ b/examples/device/midi_test_freertos/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/midi_test_freertos/CMakePresets.json b/examples/device/midi_test_freertos/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/midi_test_freertos/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/midi_test_freertos/Makefile b/examples/device/midi_test_freertos/Makefile
index 0f504bbe6..26cd83486 100644
--- a/examples/device/midi_test_freertos/Makefile
+++ b/examples/device/midi_test_freertos/Makefile
@@ -1,14 +1,9 @@
+RTOS = freertos
 include ../../build_system/make/make.mk
 
-FREERTOS_SRC = lib/FreeRTOS-Kernel
-FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC)
-
 INC += \
 	src \
 	$(TOP)/hw \
-	${TOP}/${FAMILY_PATH}/FreeRTOSConfig \
-	$(TOP)/$(FREERTOS_SRC)/include \
-	$(TOP)/$(FREERTOS_PORTABLE_SRC) \
 
 # Example source
 EXAMPLE_SOURCE += \
@@ -17,24 +12,4 @@ EXAMPLE_SOURCE += \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# FreeRTOS source, all files in port folder
-SRC_C += \
-	$(FREERTOS_SRC)/list.c \
-	$(FREERTOS_SRC)/queue.c \
-	$(FREERTOS_SRC)/tasks.c \
-	$(FREERTOS_SRC)/timers.c \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c))
-
-SRC_S += \
-	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s))
-
-# Suppress FreeRTOSConfig.h warnings
-CFLAGS_GCC += -Wno-error=redundant-decls
-
-# Suppress FreeRTOS source warnings
-CFLAGS_GCC += -Wno-error=cast-qual
-
-# FreeRTOS (lto + Os) linker issue
-LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext
-
 include ../../build_system/make/rules.mk
diff --git a/examples/device/midi_test_freertos/src/main.c b/examples/device/midi_test_freertos/src/main.c
index dbe89080c..3e406d38d 100644
--- a/examples/device/midi_test_freertos/src/main.c
+++ b/examples/device/midi_test_freertos/src/main.c
@@ -40,7 +40,7 @@
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF PROTYPES
 //--------------------------------------------------------------------+
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   #define USBD_STACK_SIZE     4096
 #else
   // Increase stack size when debug log is enabled
@@ -95,15 +95,15 @@ int main(void) {
   xTaskCreate(midi_task, "midi", MIDI_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, NULL);
 #endif
 
-#if !TUSB_MCU_VENDOR_ESPRESSIF
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
+#ifndef ESP_PLATFORM
+  // only start scheduler for non-espressif mcu
   vTaskStartScheduler();
 #endif
 
   return 0;
 }
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 void app_main(void) {
   main();
 }
diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt
index e69fead35..3955bfb49 100644
--- a/examples/device/msc_dual_lun/CMakeLists.txt
+++ b/examples/device/msc_dual_lun/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
@@ -15,20 +15,25 @@ if(FAMILY STREQUAL "espressif")
   return()
 endif()
 
-add_executable(${PROJECT})
+if (RTOS STREQUAL zephyr)
+  set(EXE_NAME app)
+else()
+  set(EXE_NAME ${PROJECT})
+  add_executable(${EXE_NAME})
+endif()
 
 # Example source
-target_sources(${PROJECT} PUBLIC
+target_sources(${EXE_NAME} PRIVATE
   ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
   ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c
   ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
   )
 
 # Example include
-target_include_directories(${PROJECT} PUBLIC
+target_include_directories(${EXE_NAME} PUBLIC
   ${CMAKE_CURRENT_SOURCE_DIR}/src
   )
 
 # Configure compilation flags and libraries for the example without RTOS.
 # See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT} noos)
+family_configure_device_example(${EXE_NAME} ${RTOS})
diff --git a/examples/device/msc_dual_lun/CMakePresets.json b/examples/device/msc_dual_lun/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/msc_dual_lun/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/msc_dual_lun/prj.conf b/examples/device/msc_dual_lun/prj.conf
new file mode 100644
index 000000000..2f5139d9d
--- /dev/null
+++ b/examples/device/msc_dual_lun/prj.conf
@@ -0,0 +1,6 @@
+CONFIG_GPIO=y
+CONFIG_FPU=y
+CONFIG_NO_OPTIMIZATIONS=y
+CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_NRFX_POWER=y
+CONFIG_NRFX_UARTE0=y
diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c
index b44b77c6c..1f7fb98c7 100644
--- a/examples/device/msc_dual_lun/src/msc_disk_dual.c
+++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c
@@ -55,8 +55,7 @@ If you find any bugs or get any questions, feel free to file an\r\n\
 issue at github.com/hathach/tinyusb"
 
 
-MSC_CONST uint8_t msc_disk0[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
+MSC_CONST uint8_t msc_disk0[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = {
   //------------- Block0: Boot Sector -------------//
   // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
   // sector_per_cluster = 1; reserved_sectors = 1;
@@ -283,9 +282,11 @@ bool tud_msc_is_writable_cb(uint8_t lun) {
 // Process data in buffer to disk's storage and return number of written bytes
 int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) {
   // out of ramdisk
-  if (lba >= DISK_BLOCK_NUM) return -1;
+  if (lba >= DISK_BLOCK_NUM) {
+    return -1;
+  }
 
-#if defined(CFG_EXAMPLE_MSC_READONLY) || defined(CFG_EXAMPLE_MSC_DUAL_READONLY)
+  #if defined(CFG_EXAMPLE_MSC_READONLY) || defined(CFG_EXAMPLE_MSC_DUAL_READONLY)
   (void) lun;
   (void) lba;
   (void) offset;
@@ -302,11 +303,8 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t*
 // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
 // - READ10 and WRITE10 has their own callbacks (MUST not be handled here)
 int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) {
-  void const* response = NULL;
-  int32_t resplen = 0;
-
-  // most scsi handled is input
-  bool in_xfer = true;
+  (void) buffer;
+  (void) bufsize;
 
   switch (scsi_cmd[0]) {
     default:
@@ -316,19 +314,6 @@ int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, u
       // negative means error -> tinyusb could stall and/or response with failed status
       return -1;
   }
-
-  // return resplen must not larger than bufsize
-  if (resplen > bufsize) resplen = bufsize;
-
-  if (response && (resplen > 0)) {
-    if (in_xfer) {
-      memcpy(buffer, response, (size_t) resplen);
-    } else {
-      // SCSI output
-    }
-  }
-
-  return resplen;
 }
 
 #endif
diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt
index 13923b583..87b92f4dc 100644
--- a/examples/device/net_lwip_webserver/CMakeLists.txt
+++ b/examples/device/net_lwip_webserver/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_LIST_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/net_lwip_webserver/CMakePresets.json b/examples/device/net_lwip_webserver/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/net_lwip_webserver/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile
index 141532466..4ad110dec 100644
--- a/examples/device/net_lwip_webserver/Makefile
+++ b/examples/device/net_lwip_webserver/Makefile
@@ -1,5 +1,3 @@
-DEPS_SUBMODULES += lib/lwip
-
 include ../../build_system/make/make.mk
 
 # suppress warning caused by lwip
diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt
index 5ebe71612..20a264387 100644
--- a/examples/device/net_lwip_webserver/skip.txt
+++ b/examples/device/net_lwip_webserver/skip.txt
@@ -10,6 +10,8 @@ mcu:SAMD11
 mcu:STM32L0
 mcu:STM32F0
 mcu:KINETIS_KL
+mcu:STM32H7RS
+mcu:STM32N6
 family:broadcom_64bit
 family:broadcom_32bit
 family:espressif
diff --git a/examples/device/net_lwip_webserver/src/lwipopts.h b/examples/device/net_lwip_webserver/src/lwipopts.h
index 41e8f0d67..04949cef9 100644
--- a/examples/device/net_lwip_webserver/src/lwipopts.h
+++ b/examples/device/net_lwip_webserver/src/lwipopts.h
@@ -58,6 +58,7 @@
 #define LWIP_HTTPD_SSI_INCLUDE_TAG      0
 
 #define LWIP_SINGLE_NETIF               1
+#define LWIP_NETIF_LINK_CALLBACK        1
 
 #define PBUF_POOL_SIZE                  4
 
diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c
index 36f402332..4bdddf6c5 100644
--- a/examples/device/net_lwip_webserver/src/main.c
+++ b/examples/device/net_lwip_webserver/src/main.c
@@ -31,6 +31,12 @@ this appears as either a RNDIS or CDC-ECM USB virtual network adapter; the OS pi
 RNDIS should be valid on Linux and Windows hosts, and CDC-ECM should be valid on Linux and macOS hosts
 
 The MCU appears to the host as IP address 192.168.7.1, and provides a DHCP server, DNS server, and web server.
+
+Link State Control:
+- Press the user button to toggle the network link state (UP/DOWN)
+- This simulates "ethernet cable unplugged/plugged" events
+- The host OS will see the network interface as disconnected/connected accordingly
+- Use this to test network error handling and recovery in host applications
 */
 /*
 Some smartphones *may* work with this implementation as well, but likely have limited (broken) drivers,
@@ -63,9 +69,6 @@ try changing the first byte of tud_network_mac_address[] below from 0x02 to 0x00
 /* lwip context */
 static struct netif netif_data;
 
-/* shared between tud_network_recv_cb() and service_traffic() */
-static struct pbuf *received_frame;
-
 /* this is used by this code, ./class/net/net_driver.c, and usb_descriptors.c */
 /* ideally speaking, this should be generated from the hardware's unique ID (if available) */
 /* it is suggested that the first byte is 0x02 to indicate a link-local address */
@@ -137,6 +140,12 @@ static err_t netif_init_cb(struct netif *netif) {
   return ERR_OK;
 }
 
+/* notifies the USB host about the link state change. */
+static void usbnet_netif_link_callback(struct netif *netif) {
+    bool link_up = netif_is_link_up(netif);
+    tud_network_link_state(BOARD_TUD_RHPORT, link_up);
+}
+
 static void init_lwip(void) {
   struct netif *netif = &netif_data;
 
@@ -147,11 +156,19 @@ static void init_lwip(void) {
   memcpy(netif->hwaddr, tud_network_mac_address, sizeof(tud_network_mac_address));
   netif->hwaddr[5] ^= 0x01;
 
-  netif = netif_add(netif, &ipaddr, &netmask, &gateway, NULL, netif_init_cb, ip_input);
+  netif = netif_add(netif, &ipaddr, &netmask, &gateway, NULL, netif_init_cb, ethernet_input);
 #if LWIP_IPV6
   netif_create_ip6_linklocal_address(netif, 1);
 #endif
   netif_set_default(netif);
+
+#if LWIP_NETIF_LINK_CALLBACK
+  // Set the link callback to notify USB host about link state changes
+  netif_set_link_callback(netif, usbnet_netif_link_callback);
+  netif_set_link_up(netif);
+#else
+  tud_network_link_state(BOARD_TUD_RHPORT, true);
+#endif
 }
 
 /* handle any DNS requests from dns-server */
@@ -164,20 +181,29 @@ bool dns_query_proc(const char *name, ip4_addr_t *addr) {
 }
 
 bool tud_network_recv_cb(const uint8_t *src, uint16_t size) {
-  /* this shouldn't happen, but if we get another packet before
-  parsing the previous, we must signal our inability to accept it */
-  if (received_frame) return false;
+  struct netif *netif = &netif_data;
 
   if (size) {
     struct pbuf *p = pbuf_alloc(PBUF_RAW, size, PBUF_POOL);
 
-    if (p) {
-      /* pbuf_alloc() has already initialized struct; all we need to do is copy the data */
-      memcpy(p->payload, src, size);
+    if (p == NULL) {
+      printf("ERROR: Failed to allocate pbuf of size %d\n", size);
+      return false;
+    }
+
+    /* Copy buf to pbuf */
+    pbuf_take(p, src, size);
 
-      /* store away the pointer for service_traffic() to later handle */
-      received_frame = p;
+    // Surrender ownership of our pbuf unless there was an error
+    // Only call pbuf_free if not Ok else it will panic with "pbuf_free: p->ref > 0"
+    // or steal it from whatever took ownership of it with undefined consequences.
+    // See: https://savannah.nongnu.org/patch/index.php?10121
+    if (netif->input(p, netif) != ERR_OK) {
+      printf("ERROR: netif input failed\n");
+      pbuf_free(p);
     }
+    // Signal tinyusb that the current frame has been processed.
+    tud_network_recv_renew();
   }
 
   return true;
@@ -191,29 +217,26 @@ uint16_t tud_network_xmit_cb(uint8_t *dst, void *ref, uint16_t arg) {
   return pbuf_copy_partial(p, dst, p->tot_len, 0);
 }
 
-static void service_traffic(void) {
-  /* handle any packet received by tud_network_recv_cb() */
-  if (received_frame) {
-    // Surrender ownership of our pbuf unless there was an error
-    // Only call pbuf_free if not Ok else it will panic with "pbuf_free: p->ref > 0"
-    // or steal it from whatever took ownership of it with undefined consequences.
-    // See: https://savannah.nongnu.org/patch/index.php?10121
-    if (ethernet_input(received_frame, &netif_data)!=ERR_OK) {
-        pbuf_free(received_frame);
+static void handle_link_state_switch(void) {
+  /* Check for button press to toggle link state */
+  static bool last_link_state = true;
+  static bool last_button_state = false;
+  bool current_button_state = board_button_read();
+
+  if (current_button_state && !last_button_state) {
+    /* Button pressed - toggle link state */
+    last_link_state = !last_link_state;
+    if (last_link_state) {
+      printf("Link state: UP\n");
+      netif_set_link_up(&netif_data);
+    } else {
+      printf("Link state: DOWN\n");
+      netif_set_link_down(&netif_data);
     }
-    received_frame = NULL;
-    tud_network_recv_renew();
+    /* LWIP callback will notify USB host about the change */
   }
+  last_button_state = current_button_state;
 
-  sys_check_timeouts();
-}
-
-void tud_network_init_cb(void) {
-  /* if the network is re-initializing and we have a leftover packet, we must do a cleanup */
-  if (received_frame) {
-    pbuf_free(received_frame);
-    received_frame = NULL;
-  }
 }
 
 int main(void) {
@@ -243,15 +266,23 @@ int main(void) {
   lwiperf_start_tcp_server_default(NULL, NULL);
 #endif
 
+#if CFG_TUD_NCM
+  printf("USB NCM network interface initialized\n");
+#elif CFG_TUD_ECM_RNDIS
+  printf("USB RNDIS/ECM network interface initialized\n");
+#endif
+
   while (1) {
     tud_task();
-    service_traffic();
+    sys_check_timeouts(); // service lwip
+    handle_link_state_switch();
   }
 
   return 0;
 }
 
 /* lwip has provision for using a mutex, when applicable */
+/* This implementation is for single-threaded use only */
 sys_prot_t sys_arch_protect(void) {
   return 0;
 }
diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h
index 22082fc81..c774f59ff 100644
--- a/examples/device/net_lwip_webserver/src/tusb_config.h
+++ b/examples/device/net_lwip_webserver/src/tusb_config.h
@@ -85,6 +85,7 @@ extern "C" {
 #endif
 
 // Use different configurations to test all net devices (also due to resource limitations)
+#ifndef USE_ECM
 #if TU_CHECK_MCU(OPT_MCU_LPC15XX, OPT_MCU_LPC40XX, OPT_MCU_LPC51UXX, OPT_MCU_LPC54)
   #define USE_ECM 1
 #elif TU_CHECK_MCU(OPT_MCU_SAMD21, OPT_MCU_SAML21, OPT_MCU_SAML22)
@@ -97,6 +98,7 @@ extern "C" {
   #define USE_ECM 0
   #define INCLUDE_IPERF
 #endif
+#endif
 
 //--------------------------------------------------------------------
 // NCM CLASS CONFIGURATION, SEE "ncm.h" FOR PERFORMANCE TUNING
diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt
index e92a57148..ced98a909 100644
--- a/examples/device/uac2_headset/CMakeLists.txt
+++ b/examples/device/uac2_headset/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/uac2_headset/CMakePresets.json b/examples/device/uac2_headset/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/uac2_headset/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/uac2_speaker_fb/CMakeLists.txt b/examples/device/uac2_speaker_fb/CMakeLists.txt
index f40ca8716..0ed3db646 100644
--- a/examples/device/uac2_speaker_fb/CMakeLists.txt
+++ b/examples/device/uac2_speaker_fb/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/uac2_speaker_fb/CMakePresets.json b/examples/device/uac2_speaker_fb/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/uac2_speaker_fb/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt
index a63ca2d81..d2deb72d5 100644
--- a/examples/device/usbtmc/CMakeLists.txt
+++ b/examples/device/usbtmc/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/usbtmc/CMakePresets.json b/examples/device/usbtmc/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/usbtmc/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt
index 80dc39ca5..90788fa60 100644
--- a/examples/device/video_capture/CMakeLists.txt
+++ b/examples/device/video_capture/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/video_capture/CMakePresets.json b/examples/device/video_capture/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/video_capture/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c
index 8bb924c61..0406279fd 100644
--- a/examples/device/video_capture/src/main.c
+++ b/examples/device/video_capture/src/main.c
@@ -185,7 +185,7 @@ static void fill_color_bar(uint8_t* buffer, unsigned start_position) {
 
 #endif
 
-void video_send_frame(void) {
+static void video_send_frame(void) {
   static unsigned start_ms = 0;
   static unsigned already_sent = 0;
 
@@ -292,7 +292,7 @@ void led_blinking_task(void* param) {
 #define BLINKY_STACK_SIZE   configMINIMAL_STACK_SIZE
 #define VIDEO_STACK_SIZE    (configMINIMAL_STACK_SIZE*4)
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   #define USBD_STACK_SIZE     4096
   int main(void);
   void app_main(void) {
@@ -351,8 +351,8 @@ void freertos_init_task(void) {
   xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL);
   #endif
 
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-  #if !TUSB_MCU_VENDOR_ESPRESSIF
+  // only start scheduler for non-espressif mcu
+  #ifndef ESP_PLATFORM
   vTaskStartScheduler();
   #endif
 }
diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h
index 6dbd6f2a5..4ba86ca65 100644
--- a/examples/device/video_capture/src/tusb_config.h
+++ b/examples/device/video_capture/src/tusb_config.h
@@ -58,7 +58,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/video_capture_2ch/CMakeLists.txt b/examples/device/video_capture_2ch/CMakeLists.txt
index 80dc39ca5..90788fa60 100644
--- a/examples/device/video_capture_2ch/CMakeLists.txt
+++ b/examples/device/video_capture_2ch/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/video_capture_2ch/CMakePresets.json b/examples/device/video_capture_2ch/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/video_capture_2ch/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}
diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c
index 245e7abb8..dc616e3fa 100644
--- a/examples/device/video_capture_2ch/src/main.c
+++ b/examples/device/video_capture_2ch/src/main.c
@@ -300,7 +300,7 @@ void led_blinking_task(void* param) {
 #define BLINKY_STACK_SIZE   configMINIMAL_STACK_SIZE
 #define VIDEO_STACK_SIZE    (configMINIMAL_STACK_SIZE*4)
 
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
   #define USBD_STACK_SIZE     4096
   int main(void);
   void app_main(void) {
@@ -359,8 +359,8 @@ void freertos_init_task(void) {
   xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL);
   #endif
 
-  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-  #if !TUSB_MCU_VENDOR_ESPRESSIF
+  // only start scheduler for non-espressif mcu
+  #ifndef ESP_PLATFORM
   vTaskStartScheduler();
   #endif
 }
diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h
index 91775a327..e84e49879 100644
--- a/examples/device/video_capture_2ch/src/tusb_config.h
+++ b/examples/device/video_capture_2ch/src/tusb_config.h
@@ -58,7 +58,7 @@
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUSB_MCU_VENDOR_ESPRESSIF
+#ifdef ESP_PLATFORM
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt
index e92a57148..ced98a909 100644
--- a/examples/device/webusb_serial/CMakeLists.txt
+++ b/examples/device/webusb_serial/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.17)
+cmake_minimum_required(VERSION 3.20)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
diff --git a/examples/device/webusb_serial/CMakePresets.json b/examples/device/webusb_serial/CMakePresets.json
new file mode 100644
index 000000000..5cd8971e9
--- /dev/null
+++ b/examples/device/webusb_serial/CMakePresets.json
@@ -0,0 +1,6 @@
+{
+  "version": 6,
+  "include": [
+    "../../../hw/bsp/BoardPresets.json"
+  ]
+}