Merge branch 'master' into fork/atoktoto/midihost

# Conflicts:
#	hw/bsp/rp2040/family.cmake
#	src/class/midi/midi.h
#	src/class/midi/midi_device.c
#	src/device/usbd_control.c
#	src/host/hcd.h
#	src/host/usbh.c
#	src/host/usbh.h

2 files changed, 57 insertions, 39 deletions

diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c
index 51cab2de0..f582f4f5a 100644
--- a/examples/host/bare_api/src/main.c
+++ b/examples/host/bare_api/src/main.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -23,17 +23,14 @@
  *
  */
 
-/* This example current worked and tested with following controller
- * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc
- */
-
 
 #include <stdlib.h>
 #include <stdio.h>
 #include <string.h>
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
+#include "class/hid/hid.h"
 
 // English
 #define LANGUAGE_ID 0x0409
@@ -65,7 +62,15 @@ int main(void)
   printf("TinyUSB Bare API Example\r\n");
 
   // init host stack on configured roothub port
-  tuh_init(BOARD_TUH_RHPORT);
+  tusb_rhport_init_t host_init = {
+    .role = TUSB_ROLE_HOST,
+    .speed = TUSB_SPEED_AUTO
+  };
+  tusb_init(BOARD_TUH_RHPORT, &host_init);
+
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
 
   while (1)
   {
@@ -410,10 +415,11 @@ static int _count_utf8_bytes(const uint16_t *buf, size_t len) {
 }
 
 static void print_utf16(uint16_t *temp_buf, size_t buf_len) {
+    if ((temp_buf[0] & 0xff) == 0) return;  // empty
     size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t);
     size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len);
     _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len);
     ((uint8_t*) temp_buf)[utf8_len] = '\0';
 
-    printf((char*)temp_buf);
+    printf("%s", (char*)temp_buf);
 }
diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h
index ed0aaf7da..fab233be0 100644
--- a/examples/host/bare_api/src/tusb_config.h
+++ b/examples/host/bare_api/src/tusb_config.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -23,29 +23,15 @@
  *
  */
 
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
+#ifndef TUSB_CONFIG_H_
+#define TUSB_CONFIG_H_
 
 #ifdef __cplusplus
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------+
-// Board Specific Configuration
-//--------------------------------------------------------------------+
-
-// RHPort number used for host can be defined by board.mk, default to port 0
-#ifndef BOARD_TUH_RHPORT
-#define BOARD_TUH_RHPORT      0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-#ifndef BOARD_TUH_MAX_SPEED
-#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
-#endif
-
 //--------------------------------------------------------------------
-// COMMON CONFIGURATION
+// Common Configuration
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
@@ -61,12 +47,6 @@
 #define CFG_TUSB_DEBUG        0
 #endif
 
-// Enable Host stack
-#define CFG_TUH_ENABLED       1
-
-// Default is max speed that hardware controller could support with on-chip PHY
-#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
-
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -74,16 +54,48 @@
  * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
  * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
  */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
+#ifndef CFG_TUH_MEM_SECTION
+#define CFG_TUH_MEM_SECTION
 #endif
 
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#ifndef CFG_TUH_MEM_ALIGN
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
-// CONFIGURATION
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// Driver Configuration
 //--------------------------------------------------------------------
 
 // Size of buffer to hold descriptors and other data used for enumeration
@@ -94,7 +106,7 @@
 
 // max device support (excluding hub device)
 // 1 hub typically has 4 ports
-#define CFG_TUH_DEVICE_MAX          (CFG_TUH_HUB ? 4 : 1)
+#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)
 
 // Max endpoint per device
 #define CFG_TUH_ENDPOINT_MAX        8
@@ -106,4 +118,4 @@
  }
 #endif
 
-#endif /* _TUSB_CONFIG_H_ */
+#endif