Merge branch 'master' into remove-tud_network_link_state_cb

5 files changed, 46 insertions, 42 deletions

diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt
index 05398b079..76182d6fa 100644
--- a/examples/host/bare_api/CMakeLists.txt
+++ b/examples/host/bare_api/CMakeLists.txt
@@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM)
 # Checks this example is valid for the family and initializes the project
 family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
 
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
 add_executable(${PROJECT})
 
 # Example source
diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile
index 058307c40..0235e08c3 100644
--- a/examples/host/bare_api/Makefile
+++ b/examples/host/bare_api/Makefile
@@ -1,4 +1,4 @@
-include ../../make.mk
+include ../../build_system/make/make.mk
 
 INC += \
 	src \
@@ -10,14 +10,4 @@ EXAMPLE_SOURCE += \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# TinyUSB Host Stack source
-SRC_C += \
-	src/class/cdc/cdc_host.c \
-	src/class/hid/hid_host.c \
-	src/class/msc/msc_host.c \
-	src/host/hub.c \
-	src/host/usbh.c \
-	src/portable/ohci/ohci.c \
-	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
-
-include ../../rules.mk
+include ../../build_system/make/rules.mk
diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt
index f8aa2186f..fee10f9e2 100644
--- a/examples/host/bare_api/only.txt
+++ b/examples/host/bare_api/only.txt
@@ -1,3 +1,4 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX
@@ -10,3 +11,4 @@ mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
 mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c
index 14725996d..670e58498 100644
--- a/examples/host/bare_api/src/main.c
+++ b/examples/host/bare_api/src/main.c
@@ -34,6 +34,7 @@
 
 #include "bsp/board_api.h"
 #include "tusb.h"
+#include "class/hid/hid.h"
 
 // English
 #define LANGUAGE_ID 0x0409
@@ -420,5 +421,5 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) {
     _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len);
     ((uint8_t*) temp_buf)[utf8_len] = '\0';
 
-    printf((char*)temp_buf);
+    printf("%s", (char*)temp_buf);
 }
diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h
index ede9618d3..432446e94 100644
--- a/examples/host/bare_api/src/tusb_config.h
+++ b/examples/host/bare_api/src/tusb_config.h
@@ -30,28 +30,8 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------+
-// Board Specific Configuration
-//--------------------------------------------------------------------+
-
-#if CFG_TUSB_MCU == OPT_MCU_RP2040
-// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
-#define CFG_TUH_RPI_PIO_USB   0
-#define BOARD_TUH_RHPORT      CFG_TUH_RPI_PIO_USB
-#endif
-
-// RHPort number used for host can be defined by board.mk, default to port 0
-#ifndef BOARD_TUH_RHPORT
-#define BOARD_TUH_RHPORT      0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-#ifndef BOARD_TUH_MAX_SPEED
-#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
-#endif
-
 //--------------------------------------------------------------------
-// COMMON CONFIGURATION
+// Common Configuration
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
@@ -67,12 +47,6 @@
 #define CFG_TUSB_DEBUG        0
 #endif
 
-// Enable Host stack
-#define CFG_TUH_ENABLED       1
-
-// Default is max speed that hardware controller could support with on-chip PHY
-#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
-
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -85,11 +59,43 @@
 #endif
 
 #ifndef CFG_TUH_MEM_ALIGN
-#define CFG_TUH_MEM_ALIGN        __attribute__ ((aligned(4)))
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 //--------------------------------------------------------------------
-// CONFIGURATION
+// Driver Configuration
 //--------------------------------------------------------------------
 
 // Size of buffer to hold descriptors and other data used for enumeration