Merge remote-tracking branch 'upstream/master' into pr/1702

5 files changed, 63 insertions, 55 deletions

diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt
index bc04b01a7..76182d6fa 100644
--- a/examples/host/bare_api/CMakeLists.txt
+++ b/examples/host/bare_api/CMakeLists.txt
@@ -1,15 +1,20 @@
-cmake_minimum_required(VERSION 3.5)
+cmake_minimum_required(VERSION 3.17)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
 # gets PROJECT name for the example
 family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
 
-project(${PROJECT})
+project(${PROJECT} C CXX ASM)
 
 # Checks this example is valid for the family and initializes the project
 family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
 
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
 add_executable(${PROJECT})
 
 # Example source
@@ -22,9 +27,6 @@ target_include_directories(${PROJECT} PUBLIC
         ${CMAKE_CURRENT_SOURCE_DIR}/src
         )
 
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
-
-# For rp2040, un-comment to enable pico-pio-usb
-# family_add_pico_pio_usb(${PROJECT})
\ No newline at end of file
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} noos)
diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile
index 13e14df53..0235e08c3 100644
--- a/examples/host/bare_api/Makefile
+++ b/examples/host/bare_api/Makefile
@@ -1,5 +1,4 @@
-include ../../../tools/top.mk
-include ../../make.mk
+include ../../build_system/make/make.mk
 
 INC += \
 	src \
@@ -11,17 +10,4 @@ EXAMPLE_SOURCE += \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# TODO: suppress warning caused by host stack
-CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference
-
-# TinyUSB Host Stack source
-SRC_C += \
-	src/class/cdc/cdc_host.c \
-	src/class/hid/hid_host.c \
-	src/class/msc/msc_host.c \
-	src/host/hub.c \
-	src/host/usbh.c \
-	src/portable/ohci/ohci.c \
-	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
-
-include ../../rules.mk
+include ../../build_system/make/rules.mk
diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt
index fa9c14857..fee10f9e2 100644
--- a/examples/host/bare_api/only.txt
+++ b/examples/host/bare_api/only.txt
@@ -1,11 +1,14 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
-mcu:MIMXRT
+mcu:MIMXRT1XXX
 mcu:MIMXRT10XX
 mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c
index 51cab2de0..14725996d 100644
--- a/examples/host/bare_api/src/main.c
+++ b/examples/host/bare_api/src/main.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -32,7 +32,7 @@
 #include <stdio.h>
 #include <string.h>
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 // English
@@ -67,6 +67,10 @@ int main(void)
   // init host stack on configured roothub port
   tuh_init(BOARD_TUH_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     // tinyusb host task
@@ -410,6 +414,7 @@ static int _count_utf8_bytes(const uint16_t *buf, size_t len) {
 }
 
 static void print_utf16(uint16_t *temp_buf, size_t buf_len) {
+    if ((temp_buf[0] & 0xff) == 0) return;  // empty
     size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t);
     size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len);
     _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len);
diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h
index ed0aaf7da..432446e94 100644
--- a/examples/host/bare_api/src/tusb_config.h
+++ b/examples/host/bare_api/src/tusb_config.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -30,22 +30,8 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------+
-// Board Specific Configuration
-//--------------------------------------------------------------------+
-
-// RHPort number used for host can be defined by board.mk, default to port 0
-#ifndef BOARD_TUH_RHPORT
-#define BOARD_TUH_RHPORT      0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-#ifndef BOARD_TUH_MAX_SPEED
-#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
-#endif
-
 //--------------------------------------------------------------------
-// COMMON CONFIGURATION
+// Common Configuration
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
@@ -61,12 +47,6 @@
 #define CFG_TUSB_DEBUG        0
 #endif
 
-// Enable Host stack
-#define CFG_TUH_ENABLED       1
-
-// Default is max speed that hardware controller could support with on-chip PHY
-#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
-
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -74,16 +54,48 @@
  * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
  * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
  */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
+#ifndef CFG_TUH_MEM_SECTION
+#define CFG_TUH_MEM_SECTION
+#endif
+
+#ifndef CFG_TUH_MEM_ALIGN
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
 #endif
 
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 //--------------------------------------------------------------------
-// CONFIGURATION
+// Driver Configuration
 //--------------------------------------------------------------------
 
 // Size of buffer to hold descriptors and other data used for enumeration
@@ -94,7 +106,7 @@
 
 // max device support (excluding hub device)
 // 1 hub typically has 4 ports
-#define CFG_TUH_DEVICE_MAX          (CFG_TUH_HUB ? 4 : 1)
+#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)
 
 // Max endpoint per device
 #define CFG_TUH_ENDPOINT_MAX        8