Merge branch 'master' into dwc2-interrupts

37 files changed, 1520 insertions, 293 deletions

diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt
index 758973ab2..e6a2ece14 100644
--- a/examples/host/CMakeLists.txt
+++ b/examples/host/CMakeLists.txt
@@ -1,12 +1,13 @@
-cmake_minimum_required(VERSION 3.5)
+cmake_minimum_required(VERSION 3.17)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake)
 
-project(tinyusb_host_examples)
+project(tinyusb_host_examples C CXX ASM)
 family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR})
 
 # family_add_subdirectory will filter what to actually add based on selected FAMILY
 family_add_subdirectory(bare_api)
 family_add_subdirectory(cdc_msc_hid)
+family_add_subdirectory(cdc_msc_hid_freertos)
 family_add_subdirectory(hid_controller)
 family_add_subdirectory(msc_file_explorer)
diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt
index 616edd4ac..76182d6fa 100644
--- a/examples/host/bare_api/CMakeLists.txt
+++ b/examples/host/bare_api/CMakeLists.txt
@@ -1,15 +1,20 @@
-cmake_minimum_required(VERSION 3.5)
+cmake_minimum_required(VERSION 3.17)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
 # gets PROJECT name for the example
 family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
 
-project(${PROJECT})
+project(${PROJECT} C CXX ASM)
 
 # Checks this example is valid for the family and initializes the project
 family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
 
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
 add_executable(${PROJECT})
 
 # Example source
@@ -22,11 +27,6 @@ target_include_directories(${PROJECT} PUBLIC
         ${CMAKE_CURRENT_SOURCE_DIR}/src
         )
 
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
-
-# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host
-if(FAMILY STREQUAL "rp2040")
-  family_add_pico_pio_usb(${PROJECT})
-endif()
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} noos)
diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile
index 058307c40..0235e08c3 100644
--- a/examples/host/bare_api/Makefile
+++ b/examples/host/bare_api/Makefile
@@ -1,4 +1,4 @@
-include ../../make.mk
+include ../../build_system/make/make.mk
 
 INC += \
 	src \
@@ -10,14 +10,4 @@ EXAMPLE_SOURCE += \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# TinyUSB Host Stack source
-SRC_C += \
-	src/class/cdc/cdc_host.c \
-	src/class/hid/hid_host.c \
-	src/class/msc/msc_host.c \
-	src/host/hub.c \
-	src/host/usbh.c \
-	src/portable/ohci/ohci.c \
-	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
-
-include ../../rules.mk
+include ../../build_system/make/rules.mk
diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt
index fa9c14857..fee10f9e2 100644
--- a/examples/host/bare_api/only.txt
+++ b/examples/host/bare_api/only.txt
@@ -1,11 +1,14 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
-mcu:MIMXRT
+mcu:MIMXRT1XXX
 mcu:MIMXRT10XX
 mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c
index bb7fa850e..14725996d 100644
--- a/examples/host/bare_api/src/main.c
+++ b/examples/host/bare_api/src/main.c
@@ -32,7 +32,7 @@
 #include <stdio.h>
 #include <string.h>
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 // English
@@ -67,6 +67,10 @@ int main(void)
   // init host stack on configured roothub port
   tuh_init(BOARD_TUH_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     // tinyusb host task
@@ -410,6 +414,7 @@ static int _count_utf8_bytes(const uint16_t *buf, size_t len) {
 }
 
 static void print_utf16(uint16_t *temp_buf, size_t buf_len) {
+    if ((temp_buf[0] & 0xff) == 0) return;  // empty
     size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t);
     size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len);
     _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len);
diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h
index ede9618d3..432446e94 100644
--- a/examples/host/bare_api/src/tusb_config.h
+++ b/examples/host/bare_api/src/tusb_config.h
@@ -30,28 +30,8 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------+
-// Board Specific Configuration
-//--------------------------------------------------------------------+
-
-#if CFG_TUSB_MCU == OPT_MCU_RP2040
-// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
-#define CFG_TUH_RPI_PIO_USB   0
-#define BOARD_TUH_RHPORT      CFG_TUH_RPI_PIO_USB
-#endif
-
-// RHPort number used for host can be defined by board.mk, default to port 0
-#ifndef BOARD_TUH_RHPORT
-#define BOARD_TUH_RHPORT      0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-#ifndef BOARD_TUH_MAX_SPEED
-#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
-#endif
-
 //--------------------------------------------------------------------
-// COMMON CONFIGURATION
+// Common Configuration
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
@@ -67,12 +47,6 @@
 #define CFG_TUSB_DEBUG        0
 #endif
 
-// Enable Host stack
-#define CFG_TUH_ENABLED       1
-
-// Default is max speed that hardware controller could support with on-chip PHY
-#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
-
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -85,11 +59,43 @@
 #endif
 
 #ifndef CFG_TUH_MEM_ALIGN
-#define CFG_TUH_MEM_ALIGN        __attribute__ ((aligned(4)))
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 //--------------------------------------------------------------------
-// CONFIGURATION
+// Driver Configuration
 //--------------------------------------------------------------------
 
 // Size of buffer to hold descriptors and other data used for enumeration
diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt
index b66ff2382..a7c372a34 100644
--- a/examples/host/cdc_msc_hid/CMakeLists.txt
+++ b/examples/host/cdc_msc_hid/CMakeLists.txt
@@ -5,31 +5,31 @@ include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
 family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
 
-project(${PROJECT})
+project(${PROJECT} C CXX ASM)
 
 # Checks this example is valid for the family and initializes the project
 family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
 
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
 add_executable(${PROJECT})
 
 # Example source
 target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
-        )
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
+  )
 
 # Example include
 target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+  )
 
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
-
-# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host
-if(FAMILY STREQUAL "rp2040")
-  family_add_pico_pio_usb(${PROJECT})
-endif()
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} noos)
diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile
index 7c16b39d3..213c02f9c 100644
--- a/examples/host/cdc_msc_hid/Makefile
+++ b/examples/host/cdc_msc_hid/Makefile
@@ -1,4 +1,4 @@
-include ../../make.mk
+include ../../build_system/make/make.mk
 
 INC += \
 	src \
@@ -13,14 +13,4 @@ EXAMPLE_SOURCE = \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# TinyUSB Host Stack source
-SRC_C += \
-	src/class/cdc/cdc_host.c \
-	src/class/hid/hid_host.c \
-	src/class/msc/msc_host.c \
-	src/host/hub.c \
-	src/host/usbh.c \
-	src/portable/ohci/ohci.c \
-	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
-
-include ../../rules.mk
+include ../../build_system/make/rules.mk
diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt
index fa9c14857..fee10f9e2 100644
--- a/examples/host/cdc_msc_hid/only.txt
+++ b/examples/host/cdc_msc_hid/only.txt
@@ -1,11 +1,14 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
-mcu:MIMXRT
+mcu:MIMXRT1XXX
 mcu:MIMXRT10XX
 mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c
index 7769d109e..e275e7943 100644
--- a/examples/host/cdc_msc_hid/src/cdc_app.c
+++ b/examples/host/cdc_msc_hid/src/cdc_app.c
@@ -25,22 +25,13 @@
  */
 
 #include "tusb.h"
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-
-
-//------------- IMPLEMENTATION -------------//
-
-size_t get_console_inputs(uint8_t* buf, size_t bufsize)
-{
+size_t get_console_inputs(uint8_t* buf, size_t bufsize) {
   size_t count = 0;
-  while (count < bufsize)
-  {
+  while (count < bufsize) {
     int ch = board_getchar();
-    if ( ch <= 0 ) break;
+    if (ch <= 0) break;
 
     buf[count] = (uint8_t) ch;
     count++;
@@ -49,22 +40,18 @@ size_t get_console_inputs(uint8_t* buf, size_t bufsize)
   return count;
 }
 
-void cdc_app_task(void)
-{
-  uint8_t buf[64+1]; // +1 for extra null character
-  uint32_t const bufsize = sizeof(buf)-1;
+void cdc_app_task(void) {
+  uint8_t buf[64 + 1]; // +1 for extra null character
+  uint32_t const bufsize = sizeof(buf) - 1;
 
   uint32_t count = get_console_inputs(buf, bufsize);
   buf[count] = 0;
 
   // loop over all mounted interfaces
-  for(uint8_t idx=0; idx<CFG_TUH_CDC; idx++)
-  {
-    if ( tuh_cdc_mounted(idx) )
-    {
+  for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) {
+    if (tuh_cdc_mounted(idx)) {
       // console --> cdc interfaces
-      if (count)
-      {
+      if (count) {
         tuh_cdc_write(idx, buf, count);
         tuh_cdc_write_flush(idx);
       }
@@ -72,11 +59,14 @@ void cdc_app_task(void)
   }
 }
 
+//--------------------------------------------------------------------+
+// TinyUSB callbacks
+//--------------------------------------------------------------------+
+
 // Invoked when received new data
-void tuh_cdc_rx_cb(uint8_t idx)
-{
-  uint8_t buf[64+1]; // +1 for extra null character
-  uint32_t const bufsize = sizeof(buf)-1;
+void tuh_cdc_rx_cb(uint8_t idx) {
+  uint8_t buf[64 + 1]; // +1 for extra null character
+  uint32_t const bufsize = sizeof(buf) - 1;
 
   // forward cdc interfaces -> console
   uint32_t count = tuh_cdc_read(idx, buf, bufsize);
@@ -85,29 +75,35 @@ void tuh_cdc_rx_cb(uint8_t idx)
   printf((char*) buf);
 }
 
-void tuh_cdc_mount_cb(uint8_t idx)
-{
-  tuh_itf_info_t itf_info = { 0 };
+// Invoked when a device with CDC interface is mounted
+// idx is index of cdc interface in the internal pool.
+void tuh_cdc_mount_cb(uint8_t idx) {
+  tuh_itf_info_t itf_info = {0};
   tuh_cdc_itf_get_info(idx, &itf_info);
 
-  printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber);
+  printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr,
+         itf_info.desc.bInterfaceNumber);
 
 #ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM
-  // CFG_TUH_CDC_LINE_CODING_ON_ENUM must be defined for line coding is set by tinyusb in enumeration
-  // otherwise you need to call tuh_cdc_set_line_coding() first
-  cdc_line_coding_t line_coding = { 0 };
-  if ( tuh_cdc_get_local_line_coding(idx, &line_coding) )
-  {
+  // If CFG_TUH_CDC_LINE_CODING_ON_ENUM is defined, line coding will be set by tinyusb stack
+  // while eneumerating new cdc device
+  cdc_line_coding_t line_coding = {0};
+  if (tuh_cdc_get_local_line_coding(idx, &line_coding)) {
     printf("  Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits);
-    printf("  Parity  : %u, Data Width: %u\r\n", line_coding.parity  , line_coding.data_bits);
+    printf("  Parity  : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits);
   }
+#else
+  // Set Line Coding upon mounted
+  cdc_line_coding_t new_line_coding = { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 };
+  tuh_cdc_set_line_coding(idx, &new_line_coding, NULL, 0);
 #endif
 }
 
-void tuh_cdc_umount_cb(uint8_t idx)
-{
-  tuh_itf_info_t itf_info = { 0 };
+// Invoked when a device with CDC interface is unmounted
+void tuh_cdc_umount_cb(uint8_t idx) {
+  tuh_itf_info_t itf_info = {0};
   tuh_cdc_itf_get_info(idx, &itf_info);
 
-  printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber);
+  printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr,
+         itf_info.desc.bInterfaceNumber);
 }
diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c
index ed53c502d..f0d42a08f 100644
--- a/examples/host/cdc_msc_hid/src/hid_app.c
+++ b/examples/host/cdc_msc_hid/src/hid_app.c
@@ -23,7 +23,7 @@
  *
  */
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 //--------------------------------------------------------------------+
@@ -160,7 +160,9 @@ static void process_kbd_report(hid_keyboard_report_t const *report)
         putchar(ch);
         if ( ch == '\r' ) putchar('\n'); // added new line for enter key
 
+        #ifndef __ICCARM__ // TODO IAR doesn't support stream control ?
         fflush(stdout); // flush right away, else nanolib will wait for newline
+        #endif
       }
     }
     // TODO example skips key released
@@ -263,7 +265,7 @@ static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t c
 
   if (!rpt_info)
   {
-    printf("Couldn't find the report info for this report !\r\n");
+    printf("Couldn't find report info !\r\n");
     return;
   }
 
diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c
index 1f4acb822..a3b80e030 100644
--- a/examples/host/cdc_msc_hid/src/main.c
+++ b/examples/host/cdc_msc_hid/src/main.c
@@ -27,20 +27,24 @@
 #include <stdio.h>
 #include <string.h>
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF PROTYPES
 //--------------------------------------------------------------------+
 void led_blinking_task(void);
-
 extern void cdc_app_task(void);
 extern void hid_app_task(void);
 
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+// API to read/rite MAX3421's register. Implemented by TinyUSB
+extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr);
+extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr);
+#endif
+
 /*------------- MAIN -------------*/
-int main(void)
-{
+int main(void) {
   board_init();
 
   printf("TinyUSB Host CDC MSC HID Example\r\n");
@@ -48,8 +52,17 @@ int main(void)
   // init host stack on configured roothub port
   tuh_init(BOARD_TUH_RHPORT);
 
-  while (1)
-  {
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+  // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable
+  enum { IOPINS1_ADDR  = 20u << 3, /* 0xA0 */ };
+  tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false);
+#endif
+
+  while (1) {
     // tinyusb host task
     tuh_task();
 
@@ -63,14 +76,12 @@ int main(void)
 // TinyUSB Callbacks
 //--------------------------------------------------------------------+
 
-void tuh_mount_cb(uint8_t dev_addr)
-{
+void tuh_mount_cb(uint8_t dev_addr) {
   // application set-up
   printf("A device with address %d is mounted\r\n", dev_addr);
 }
 
-void tuh_umount_cb(uint8_t dev_addr)
-{
+void tuh_umount_cb(uint8_t dev_addr) {
   // application tear-down
   printf("A device with address %d is unmounted \r\n", dev_addr);
 }
@@ -79,15 +90,14 @@ void tuh_umount_cb(uint8_t dev_addr)
 //--------------------------------------------------------------------+
 // Blinking Task
 //--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
+void led_blinking_task(void) {
   const uint32_t interval_ms = 1000;
   static uint32_t start_ms = 0;
 
   static bool led_state = false;
 
   // Blink every interval ms
-  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  if (board_millis() - start_ms < interval_ms) return; // not enough time
   start_ms += interval_ms;
 
   board_led_write(led_state);
diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h
index abb75f068..a59a0ffb9 100644
--- a/examples/host/cdc_msc_hid/src/tusb_config.h
+++ b/examples/host/cdc_msc_hid/src/tusb_config.h
@@ -30,28 +30,8 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------+
-// Board Specific Configuration
-//--------------------------------------------------------------------+
-
-#if CFG_TUSB_MCU == OPT_MCU_RP2040
-// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
-#define CFG_TUH_RPI_PIO_USB   0
-#define BOARD_TUH_RHPORT      CFG_TUH_RPI_PIO_USB
-#endif
-
-// RHPort number used for host can be defined by board.mk, default to port 0
-#ifndef BOARD_TUH_RHPORT
-#define BOARD_TUH_RHPORT      0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-#ifndef BOARD_TUH_MAX_SPEED
-#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
-#endif
-
 //--------------------------------------------------------------------
-// COMMON CONFIGURATION
+// Common Configuration
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
@@ -67,12 +47,6 @@
 #define CFG_TUSB_DEBUG        0
 #endif
 
-// Enable Host stack
-#define CFG_TUH_ENABLED       1
-
-// Default is max speed that hardware controller could support with on-chip PHY
-#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
-
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -85,11 +59,43 @@
 #endif
 
 #ifndef CFG_TUH_MEM_ALIGN
-#define CFG_TUH_MEM_ALIGN        __attribute__ ((aligned(4)))
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 //--------------------------------------------------------------------
-// CONFIGURATION
+// Driver Configuration
 //--------------------------------------------------------------------
 
 // Size of buffer to hold descriptors and other data used for enumeration
@@ -99,6 +105,7 @@
 #define CFG_TUH_CDC                 1 // CDC ACM
 #define CFG_TUH_CDC_FTDI            1 // FTDI Serial.  FTDI is not part of CDC class, only to re-use CDC driver API
 #define CFG_TUH_CDC_CP210X          1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_CDC_CH34X           1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API
 #define CFG_TUH_HID                 (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces
 #define CFG_TUH_MSC                 1
 #define CFG_TUH_VENDOR              0
@@ -118,7 +125,7 @@
 
 // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t
 // bit rate = 115200, 1 stop bit, no parity, 8 bit data width
-#define CFG_TUH_CDC_LINE_CODING_ON_ENUM   { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }
+#define CFG_TUH_CDC_LINE_CODING_ON_ENUM   { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }
 
 
 #ifdef __cplusplus
diff --git a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt
new file mode 100644
index 000000000..2e95a18e0
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt
@@ -0,0 +1,36 @@
+cmake_minimum_required(VERSION 3.17)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT} C CXX ASM)
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/freertos_hook.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
+  )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+  )
+
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} freertos)
diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile
new file mode 100644
index 000000000..5351a6248
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/Makefile
@@ -0,0 +1,34 @@
+include ../../build_system/make/make.mk
+
+FREERTOS_SRC = lib/FreeRTOS-Kernel
+FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC)
+
+INC += \
+	src \
+	src/FreeRTOSConfig \
+	$(TOP)/hw \
+	$(TOP)/$(FREERTOS_SRC)/include \
+	$(TOP)/$(FREERTOS_PORTABLE_SRC) \
+
+# Example source
+EXAMPLE_SOURCE = \
+  src/cdc_app.c \
+  src/freertos_hook.c \
+  src/hid_app.c \
+  src/main.c \
+  src/msc_app.c \
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+# FreeRTOS source, all files in port folder
+SRC_C += \
+	$(FREERTOS_SRC)/list.c \
+	$(FREERTOS_SRC)/queue.c \
+	$(FREERTOS_SRC)/tasks.c \
+	$(FREERTOS_SRC)/timers.c \
+	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c))
+
+SRC_S += \
+	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s))
+
+include ../../build_system/make/rules.mk
diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt
new file mode 100644
index 000000000..81d993ffa
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/only.txt
@@ -0,0 +1,12 @@
+mcu:LPC175X_6X
+mcu:LPC177X_8X
+mcu:LPC18XX
+mcu:LPC40XX
+mcu:LPC43XX
+mcu:MIMXRT1XXX
+mcu:MIMXRT10XX
+mcu:MIMXRT11XX
+mcu:MSP432E4
+mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/cdc_msc_hid_freertos/skip.txt b/examples/host/cdc_msc_hid_freertos/skip.txt
new file mode 100644
index 000000000..2ba4438fd
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/skip.txt
@@ -0,0 +1 @@
+mcu:RP2040
diff --git a/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt
new file mode 100644
index 000000000..6f057c106
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt
@@ -0,0 +1,6 @@
+# This file is for ESP-IDF only
+idf_component_register(SRCS "cdc_app.c" "hid_app.c" "main.c" "msc_app.c"
+                    INCLUDE_DIRS "."
+                    REQUIRES boards tinyusb_src)
+
+target_compile_options(${COMPONENT_LIB} PRIVATE -Wno-error=format)
diff --git a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..bd754518d
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,199 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+
+// Include MCU header
+#include "bsp/board_mcu.h"
+
+#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
+  #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
+#endif
+
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wredundant-decls"
+#endif
+
+// TODO fix later
+// FIXME cause redundant-decls warnings
+#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
+  extern u32 SystemCoreClock;
+#else
+  extern uint32_t SystemCoreClock;
+#endif
+
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      0
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */
diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c
new file mode 100644
index 000000000..6ff513be1
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c
@@ -0,0 +1,145 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb.h"
+#include "bsp/board_api.h"
+
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+// ESP-IDF need "freertos/" prefix in include path.
+// CFG_TUSB_OS_INC_PATH should be defined accordingly.
+  #include "freertos/FreeRTOS.h"
+  #include "freertos/semphr.h"
+  #include "freertos/queue.h"
+  #include "freertos/task.h"
+  #include "freertos/timers.h"
+
+  #define CDC_STACK_SZIE      2048
+#else
+  #include "FreeRTOS.h"
+  #include "semphr.h"
+  #include "queue.h"
+  #include "task.h"
+  #include "timers.h"
+
+  #define CDC_STACK_SZIE     (3*configMINIMAL_STACK_SIZE/2)
+#endif
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+#if configSUPPORT_STATIC_ALLOCATION
+StackType_t  cdc_stack[CDC_STACK_SZIE];
+StaticTask_t cdc_taskdef;
+#endif
+
+static void cdc_app_task(void* param);
+
+void cdc_app_init(void) {
+  #if configSUPPORT_STATIC_ALLOCATION
+  xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef);
+  #else
+  xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL);
+  #endif
+}
+
+// helper
+size_t get_console_inputs(uint8_t *buf, size_t bufsize) {
+  size_t count = 0;
+  while (count < bufsize) {
+    int ch = board_getchar();
+    if (ch <= 0) break;
+
+    buf[count] = (uint8_t) ch;
+    count++;
+  }
+
+  return count;
+}
+
+static void cdc_app_task(void* param) {
+  (void) param;
+
+  uint8_t buf[64 + 1]; // +1 for extra null character
+  uint32_t const bufsize = sizeof(buf) - 1;
+
+  while (1) {
+    uint32_t count = get_console_inputs(buf, bufsize);
+    buf[count] = 0;
+
+    if (count) {
+      // loop over all mounted interfaces
+      for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) {
+        if (tuh_cdc_mounted(idx)) {
+          // console --> cdc interfaces
+          tuh_cdc_write(idx, buf, count);
+          tuh_cdc_write_flush(idx);
+        }
+      }
+    }
+
+    vTaskDelay(1);
+  }
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when received new data
+void tuh_cdc_rx_cb(uint8_t idx) {
+  uint8_t buf[64 + 1]; // +1 for extra null character
+  uint32_t const bufsize = sizeof(buf) - 1;
+
+  // forward cdc interfaces -> console
+  uint32_t count = tuh_cdc_read(idx, buf, bufsize);
+  buf[count] = 0;
+
+  printf((char *) buf);
+}
+
+void tuh_cdc_mount_cb(uint8_t idx) {
+  tuh_itf_info_t itf_info = { 0 };
+  tuh_cdc_itf_get_info(idx, &itf_info);
+
+  printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber);
+
+#ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM
+  // CFG_TUH_CDC_LINE_CODING_ON_ENUM must be defined for line coding is set by tinyusb in enumeration
+  // otherwise you need to call tuh_cdc_set_line_coding() first
+  cdc_line_coding_t line_coding = { 0 };
+  if (tuh_cdc_get_local_line_coding(idx, &line_coding)) {
+    printf("  Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits);
+    printf("  Parity  : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits);
+  }
+#endif
+}
+
+void tuh_cdc_umount_cb(uint8_t idx) {
+  tuh_itf_info_t itf_info = { 0 };
+  tuh_cdc_itf_get_info(idx, &itf_info);
+
+  printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber);
+}
diff --git a/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c b/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c
new file mode 100644
index 000000000..07d159fd5
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c
@@ -0,0 +1,111 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+//--------------------------------------------------------------------+
+// INCLUDE
+//--------------------------------------------------------------------+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "common/tusb_common.h"
+
+void vApplicationMallocFailedHook(void) {
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false,);
+}
+
+void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) {
+  (void) pxTask;
+  (void) pcTaskName;
+
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false,);
+}
+
+/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
+ * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
+ * used by the Idle task. */
+void vApplicationGetIdleTaskMemory(StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer,
+                                   uint32_t *pulIdleTaskStackSize) {
+  /* If the buffers to be provided to the Idle task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xIdleTaskTCB;
+  static StackType_t uxIdleTaskStack[configMINIMAL_STACK_SIZE];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
+    state will be stored. */
+  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
+
+  /* Pass out the array that will be used as the Idle task's stack. */
+  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
+  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
+}
+
+/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
+ * application must provide an implementation of vApplicationGetTimerTaskMemory()
+ * to provide the memory that is used by the Timer service task. */
+void vApplicationGetTimerTaskMemory(StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer,
+                                    uint32_t *pulTimerTaskStackSize) {
+  /* If the buffers to be provided to the Timer task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xTimerTaskTCB;
+  static StackType_t uxTimerTaskStack[configTIMER_TASK_STACK_DEPTH];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Timer
+    task's state will be stored. */
+  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
+
+  /* Pass out the array that will be used as the Timer task's stack. */
+  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
+  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
+}
+
+#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X
+#include "iodefine.h"
+void vApplicationSetupTimerInterrupt(void)
+{
+  /* Enable CMT0 */
+  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
+  MSTP(CMT0)       = 0;
+  SYSTEM.PRCR.WORD = (0xA5u<<8);
+
+  CMT0.CMCNT      = 0;
+  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
+  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
+  IR(CMT0, CMI0)  = 0;
+  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
+  IEN(CMT0, CMI0) = 1;
+  CMT.CMSTR0.BIT.STR0 = 1;
+}
+#endif
diff --git a/examples/host/cdc_msc_hid_freertos/src/hid_app.c b/examples/host/cdc_msc_hid_freertos/src/hid_app.c
new file mode 100644
index 000000000..9ea5c1be0
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/hid_app.c
@@ -0,0 +1,267 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "bsp/board_api.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+
+// If your host terminal support ansi escape code such as TeraTerm
+// it can be use to simulate mouse cursor movement within terminal
+#define USE_ANSI_ESCAPE   0
+
+#define MAX_REPORT  4
+
+static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII };
+
+// Each HID instance can has multiple reports
+static struct {
+  uint8_t report_count;
+  tuh_hid_report_info_t report_info[MAX_REPORT];
+} hid_info[CFG_TUH_HID];
+
+static void process_kbd_report(hid_keyboard_report_t const *report);
+static void process_mouse_report(hid_mouse_report_t const *report);
+static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len);
+
+void hid_app_init(void) {
+  // nothing to do
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device with hid interface is mounted
+// Report descriptor is also available for use. tuh_hid_parse_report_descriptor()
+// can be used to parse common/simple enough descriptor.
+// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped
+// therefore report_desc = NULL, desc_len = 0
+void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *desc_report, uint16_t desc_len) {
+  printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance);
+
+  // Interface protocol (hid_interface_protocol_enum_t)
+  const char *protocol_str[] = { "None", "Keyboard", "Mouse" };
+  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
+
+  printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]);
+
+  // By default host stack will use activate boot protocol on supported interface.
+  // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser)
+  if (itf_protocol == HID_ITF_PROTOCOL_NONE) {
+    hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT,
+                                                                      desc_report, desc_len);
+    printf("HID has %u reports \r\n", hid_info[instance].report_count);
+  }
+
+  // request to receive report
+  // tuh_hid_report_received_cb() will be invoked when report is available
+  if (!tuh_hid_receive_report(dev_addr, instance)) {
+    printf("Error: cannot request to receive report\r\n");
+  }
+}
+
+// Invoked when device with hid interface is un-mounted
+void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) {
+  printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance);
+}
+
+// Invoked when received report from device via interrupt endpoint
+void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) {
+  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
+
+  switch (itf_protocol) {
+    case HID_ITF_PROTOCOL_KEYBOARD:
+      TU_LOG2("HID receive boot keyboard report\r\n");
+      process_kbd_report((hid_keyboard_report_t const *) report);
+      break;
+
+    case HID_ITF_PROTOCOL_MOUSE:
+      TU_LOG2("HID receive boot mouse report\r\n");
+      process_mouse_report((hid_mouse_report_t const *) report);
+      break;
+
+    default:
+      // Generic report requires matching ReportID and contents with previous parsed report info
+      process_generic_report(dev_addr, instance, report, len);
+      break;
+  }
+
+  // continue to request to receive report
+  if (!tuh_hid_receive_report(dev_addr, instance)) {
+    printf("Error: cannot request to receive report\r\n");
+  }
+}
+
+//--------------------------------------------------------------------+
+// Keyboard
+//--------------------------------------------------------------------+
+
+// look up new key in previous keys
+static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) {
+  for (uint8_t i = 0; i < 6; i++) {
+    if (report->keycode[i] == keycode) return true;
+  }
+
+  return false;
+}
+
+static void process_kbd_report(hid_keyboard_report_t const *report) {
+  static hid_keyboard_report_t prev_report = { 0, 0, { 0 } }; // previous report to check key released
+
+  //------------- example code ignore control (non-printable) key affects -------------//
+  for (uint8_t i = 0; i < 6; i++) {
+    if (report->keycode[i]) {
+      if (find_key_in_report(&prev_report, report->keycode[i])) {
+        // exist in previous report means the current key is holding
+      } else {
+        // not existed in previous report means the current key is pressed
+        bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT);
+        uint8_t ch = keycode2ascii[report->keycode[i]][is_shift ? 1 : 0];
+        putchar(ch);
+        if (ch == '\r') putchar('\n'); // added new line for enter key
+
+        #ifndef __ICCARM__ // TODO IAR doesn't support stream control ?
+        fflush(stdout); // flush right away, else nanolib will wait for newline
+        #endif
+      }
+    }
+    // TODO example skips key released
+  }
+
+  prev_report = *report;
+}
+
+//--------------------------------------------------------------------+
+// Mouse
+//--------------------------------------------------------------------+
+
+void cursor_movement(int8_t x, int8_t y, int8_t wheel) {
+#if USE_ANSI_ESCAPE
+  // Move X using ansi escape
+  if ( x < 0) {
+    printf(ANSI_CURSOR_BACKWARD(%d), (-x)); // move left
+  }else if ( x > 0) {
+    printf(ANSI_CURSOR_FORWARD(%d), x); // move right
+  }
+
+  // Move Y using ansi escape
+  if ( y < 0) {
+    printf(ANSI_CURSOR_UP(%d), (-y)); // move up
+  }else if ( y > 0) {
+    printf(ANSI_CURSOR_DOWN(%d), y); // move down
+  }
+
+  // Scroll using ansi escape
+  if (wheel < 0) {
+    printf(ANSI_SCROLL_UP(%d), (-wheel)); // scroll up
+  }else if (wheel > 0) {
+    printf(ANSI_SCROLL_DOWN(%d), wheel); // scroll down
+  }
+
+  printf("\r\n");
+#else
+  printf("(%d %d %d)\r\n", x, y, wheel);
+#endif
+}
+
+static void process_mouse_report(hid_mouse_report_t const *report) {
+  static hid_mouse_report_t prev_report = { 0 };
+
+  //------------- button state  -------------//
+  uint8_t button_changed_mask = report->buttons ^ prev_report.buttons;
+  if (button_changed_mask & report->buttons) {
+    printf(" %c%c%c ",
+           report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-',
+           report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-',
+           report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-');
+  }
+
+  //------------- cursor movement -------------//
+  cursor_movement(report->x, report->y, report->wheel);
+}
+
+//--------------------------------------------------------------------+
+// Generic Report
+//--------------------------------------------------------------------+
+static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) {
+  (void) dev_addr;
+
+  uint8_t const rpt_count = hid_info[instance].report_count;
+  tuh_hid_report_info_t *rpt_info_arr = hid_info[instance].report_info;
+  tuh_hid_report_info_t *rpt_info = NULL;
+
+  if (rpt_count == 1 && rpt_info_arr[0].report_id == 0) {
+    // Simple report without report ID as 1st byte
+    rpt_info = &rpt_info_arr[0];
+  } else {
+    // Composite report, 1st byte is report ID, data starts from 2nd byte
+    uint8_t const rpt_id = report[0];
+
+    // Find report id in the array
+    for (uint8_t i = 0; i < rpt_count; i++) {
+      if (rpt_id == rpt_info_arr[i].report_id) {
+        rpt_info = &rpt_info_arr[i];
+        break;
+      }
+    }
+
+    report++;
+    len--;
+  }
+
+  if (!rpt_info) {
+    printf("Couldn't find report info !\r\n");
+    return;
+  }
+
+  // For complete list of Usage Page & Usage checkout src/class/hid/hid.h. For examples:
+  // - Keyboard                     : Desktop, Keyboard
+  // - Mouse                        : Desktop, Mouse
+  // - Gamepad                      : Desktop, Gamepad
+  // - Consumer Control (Media Key) : Consumer, Consumer Control
+  // - System Control (Power key)   : Desktop, System Control
+  // - Generic (vendor)             : 0xFFxx, xx
+  if (rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP) {
+    switch (rpt_info->usage) {
+      case HID_USAGE_DESKTOP_KEYBOARD:
+        TU_LOG1("HID receive keyboard report\r\n");
+        // Assume keyboard follow boot report layout
+        process_kbd_report((hid_keyboard_report_t const *) report);
+        break;
+
+      case HID_USAGE_DESKTOP_MOUSE:
+        TU_LOG1("HID receive mouse report\r\n");
+        // Assume mouse follow boot report layout
+        process_mouse_report((hid_mouse_report_t const *) report);
+        break;
+
+      default:
+        break;
+    }
+  }
+}
diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c
new file mode 100644
index 000000000..069cbdc90
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/main.c
@@ -0,0 +1,177 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board_api.h"
+#include "tusb.h"
+
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+  // ESP-IDF need "freertos/" prefix in include path.
+  // CFG_TUSB_OS_INC_PATH should be defined accordingly.
+  #include "freertos/FreeRTOS.h"
+  #include "freertos/semphr.h"
+  #include "freertos/queue.h"
+  #include "freertos/task.h"
+  #include "freertos/timers.h"
+
+  #define USBH_STACK_SIZE     4096
+#else
+  #include "FreeRTOS.h"
+  #include "semphr.h"
+  #include "queue.h"
+  #include "task.h"
+  #include "timers.h"
+
+  // Increase stack size when debug log is enabled
+  #define USBH_STACK_SIZE    (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1)
+#endif
+
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTOTYPES
+//--------------------------------------------------------------------+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+// static timer & task
+#if configSUPPORT_STATIC_ALLOCATION
+StaticTimer_t blinky_tmdef;
+
+StackType_t  usb_host_stack[USBH_STACK_SIZE];
+StaticTask_t usb_host_taskdef;
+#endif
+
+TimerHandle_t blinky_tm;
+
+static void led_blinky_cb(TimerHandle_t xTimer);
+static void usb_host_task(void* param);
+
+extern void cdc_app_init(void);
+extern void hid_app_init(void);
+extern void msc_app_init(void);
+
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+// API to read/rite MAX3421's register. Implemented by TinyUSB
+extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr);
+extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr);
+#endif
+
+/*------------- MAIN -------------*/
+int main(void) {
+  board_init();
+
+  printf("TinyUSB Host CDC MSC HID with FreeRTOS Example\r\n");
+
+  // Create soft timer for blinky, task for tinyusb stack
+#if configSUPPORT_STATIC_ALLOCATION
+  blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef);
+  xTaskCreateStatic(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_host_stack, &usb_host_taskdef);
+#else
+  blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb);
+  xTaskCreate(usb_host_task, "usbd", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL);
+#endif
+
+  xTimerStart(blinky_tm, 0);
+
+  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
+#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+  vTaskStartScheduler();
+#endif
+
+  return 0;
+}
+
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+void app_main(void) {
+  main();
+}
+#endif
+
+// USB Host task
+// This top level thread process all usb events and invoke callbacks
+static void usb_host_task(void *param) {
+  (void) param;
+
+  // init host stack on configured roothub port
+  tuh_init(BOARD_TUH_RHPORT);
+
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+  // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable
+  enum { IOPINS1_ADDR  = 20u << 3, /* 0xA0 */ };
+  tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false);
+#endif
+
+  cdc_app_init();
+  hid_app_init();
+  msc_app_init();
+
+  // RTOS forever loop
+  while (1) {
+    // put this thread to waiting state until there is new events
+    tuh_task();
+
+    // following code only run if tuh_task() process at least 1 event
+  }
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+void tuh_mount_cb(uint8_t dev_addr) {
+  // application set-up
+  printf("A device with address %d is mounted\r\n", dev_addr);
+}
+
+void tuh_umount_cb(uint8_t dev_addr) {
+  // application tear-down
+  printf("A device with address %d is unmounted \r\n", dev_addr);
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+static void led_blinky_cb(TimerHandle_t xTimer) {
+  (void) xTimer;
+  static bool led_state = false;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c
new file mode 100644
index 000000000..ee02ba917
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c
@@ -0,0 +1,67 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+static scsi_inquiry_resp_t inquiry_resp;
+
+void msc_app_init(void) {
+  // nothing to do
+}
+
+bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_data) {
+  msc_cbw_t const *cbw = cb_data->cbw;
+  msc_csw_t const *csw = cb_data->csw;
+
+  if (csw->status != 0) {
+    printf("Inquiry failed\r\n");
+    return false;
+  }
+
+  // Print out Vendor ID, Product ID and Rev
+  printf("%.8s %.16s rev %.4s\r\n", inquiry_resp.vendor_id, inquiry_resp.product_id, inquiry_resp.product_rev);
+
+  // Get capacity of device
+  uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun);
+  uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun);
+
+  printf("Disk Size: %lu MB\r\n", block_count / ((1024 * 1024) / block_size));
+  printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size);
+
+  return true;
+}
+
+//------------- IMPLEMENTATION -------------//
+void tuh_msc_mount_cb(uint8_t dev_addr) {
+  printf("A MassStorage device is mounted\r\n");
+
+  uint8_t const lun = 0;
+  tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb, 0);
+}
+
+void tuh_msc_umount_cb(uint8_t dev_addr) {
+  (void) dev_addr;
+  printf("A MassStorage device is unmounted\r\n");
+}
diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h
new file mode 100644
index 000000000..35de5ee50
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h
@@ -0,0 +1,140 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_FREERTOS
+#endif
+
+// Espressif IDF requires "freertos/" prefix in include path
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+#define CFG_TUSB_OS_INC_PATH  freertos/
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUH_MEM_SECTION
+#define CFG_TUH_MEM_SECTION
+#endif
+
+#ifndef CFG_TUH_MEM_ALIGN
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// Driver Configuration
+//--------------------------------------------------------------------
+
+// Size of buffer to hold descriptors and other data used for enumeration
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+
+#define CFG_TUH_HUB                 1 // number of supported hubs
+#define CFG_TUH_CDC                 1 // CDC ACM
+#define CFG_TUH_CDC_FTDI            1 // FTDI Serial.  FTDI is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_CDC_CP210X          1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_CDC_CH34X           1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_HID                 (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces
+#define CFG_TUH_MSC                 1
+#define CFG_TUH_VENDOR              0
+
+// max device support (excluding hub device): 1 hub typically has 4 ports
+#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)
+
+//------------- HID -------------//
+#define CFG_TUH_HID_EPIN_BUFSIZE    64
+#define CFG_TUH_HID_EPOUT_BUFSIZE   64
+
+//------------- CDC -------------//
+
+// Set Line Control state on enumeration/mounted:
+// DTR ( bit 0), RTS (bit 1)
+#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM    0x03
+
+// Set Line Coding on enumeration/mounted, value for cdc_line_coding_t
+// bit rate = 115200, 1 stop bit, no parity, 8 bit data width
+#define CFG_TUH_CDC_LINE_CODING_ON_ENUM   { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }
+
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */
diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt
index ac3070b82..c1b500dd8 100644
--- a/examples/host/hid_controller/CMakeLists.txt
+++ b/examples/host/hid_controller/CMakeLists.txt
@@ -1,33 +1,33 @@
-cmake_minimum_required(VERSION 3.5)
+cmake_minimum_required(VERSION 3.17)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
 # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
 family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
 
-project(${PROJECT})
+project(${PROJECT} C CXX ASM)
 
 # Checks this example is valid for the family and initializes the project
 family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
 
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
 add_executable(${PROJECT})
 
 # Example source
 target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        )
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  )
 
 # Example include
 target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+  )
 
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
-
-# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host
-if(FAMILY STREQUAL "rp2040")
-  family_add_pico_pio_usb(${PROJECT})
-endif()
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} noos)
diff --git a/examples/host/hid_controller/Makefile b/examples/host/hid_controller/Makefile
index cda2977bc..1377f1f90 100644
--- a/examples/host/hid_controller/Makefile
+++ b/examples/host/hid_controller/Makefile
@@ -1,4 +1,4 @@
-include ../../make.mk
+include ../../build_system/make/make.mk
 
 INC += \
 	src \
@@ -11,14 +11,4 @@ EXAMPLE_SOURCE += \
 
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-# TinyUSB Host Stack source
-SRC_C += \
-	src/class/cdc/cdc_host.c \
-	src/class/hid/hid_host.c \
-	src/class/msc/msc_host.c \
-	src/host/hub.c \
-	src/host/usbh.c \
-	src/portable/ohci/ohci.c \
-	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
-
-include ../../rules.mk
+include ../../build_system/make/rules.mk
diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt
index fa9c14857..fee10f9e2 100644
--- a/examples/host/hid_controller/only.txt
+++ b/examples/host/hid_controller/only.txt
@@ -1,11 +1,14 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
-mcu:MIMXRT
+mcu:MIMXRT1XXX
 mcu:MIMXRT10XX
 mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c
index 76de97b41..bff830ca2 100644
--- a/examples/host/hid_controller/src/hid_app.c
+++ b/examples/host/hid_controller/src/hid_app.c
@@ -23,7 +23,7 @@
  *
  */
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 /* From https://www.kernel.org/doc/html/latest/input/gamepad.html
diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c
index 4dcc92587..05a5ae176 100644
--- a/examples/host/hid_controller/src/main.c
+++ b/examples/host/hid_controller/src/main.c
@@ -32,7 +32,7 @@
 #include <stdio.h>
 #include <string.h>
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 //--------------------------------------------------------------------+
@@ -54,6 +54,10 @@ int main(void)
   // init host stack on configured roothub port
   tuh_init(BOARD_TUH_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     // tinyusb host task
diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h
index d37fc02d2..3ac591d8f 100644
--- a/examples/host/hid_controller/src/tusb_config.h
+++ b/examples/host/hid_controller/src/tusb_config.h
@@ -30,28 +30,8 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------+
-// Board Specific Configuration
-//--------------------------------------------------------------------+
-
- #if CFG_TUSB_MCU == OPT_MCU_RP2040
-// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
-#define CFG_TUH_RPI_PIO_USB   0
-#define BOARD_TUH_RHPORT      CFG_TUH_RPI_PIO_USB
-#endif
-
-// RHPort number used for host can be defined by board.mk, default to port 0
-#ifndef BOARD_TUH_RHPORT
-#define BOARD_TUH_RHPORT      0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-#ifndef BOARD_TUH_MAX_SPEED
-#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
-#endif
-
 //--------------------------------------------------------------------
-// COMMON CONFIGURATION
+// Common Configuration
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
@@ -67,12 +47,6 @@
 #define CFG_TUSB_DEBUG        0
 #endif
 
-// Enable Host stack
-#define CFG_TUH_ENABLED       1
-
-// Default is max speed that hardware controller could support with on-chip PHY
-#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
-
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -85,11 +59,43 @@
 #endif
 
 #ifndef CFG_TUH_MEM_ALIGN
-#define CFG_TUH_MEM_ALIGN        __attribute__ ((aligned(4)))
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 //--------------------------------------------------------------------
-// CONFIGURATION
+// Driver Configuration
 //--------------------------------------------------------------------
 
 // Size of buffer to hold descriptors and other data used for enumeration
diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt
index 7955b3078..1a57c7466 100644
--- a/examples/host/msc_file_explorer/CMakeLists.txt
+++ b/examples/host/msc_file_explorer/CMakeLists.txt
@@ -1,38 +1,47 @@
-cmake_minimum_required(VERSION 3.5)
+cmake_minimum_required(VERSION 3.17)
 
 include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
 # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
 family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
 
-project(${PROJECT})
+project(${PROJECT} C CXX ASM)
 
 # Checks this example is valid for the family and initializes the project
 family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
 
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
 add_executable(${PROJECT})
 
 # Example source
 target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
-        ${TOP}/lib/fatfs/source/ff.c
-        ${TOP}/lib/fatfs/source/ffsystem.c
-        ${TOP}/lib/fatfs/source/ffunicode.c
-        )
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
+  ${TOP}/lib/fatfs/source/ff.c
+  ${TOP}/lib/fatfs/source/ffsystem.c
+  ${TOP}/lib/fatfs/source/ffunicode.c
+  )
+
+# Suppress warnings on fatfs
+if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+  set_source_files_properties(
+    ${TOP}/lib/fatfs/source/ff.c
+    PROPERTIES
+    COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual"
+    )
+endif ()
 
 # Example include
 target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        ${TOP}/lib/fatfs/source
-        ${TOP}/lib/embedded-cli
-        )
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+  ${TOP}/lib/fatfs/source
+  ${TOP}/lib/embedded-cli
+  )
 
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
-
-# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host
-if(FAMILY STREQUAL "rp2040")
-  family_add_pico_pio_usb(${PROJECT})
-endif()
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} noos)
diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile
index 1fda72b18..c7d6a7cae 100644
--- a/examples/host/msc_file_explorer/Makefile
+++ b/examples/host/msc_file_explorer/Makefile
@@ -1,4 +1,4 @@
-include ../../make.mk
+include ../../build_system/make/make.mk
 
 FATFS_PATH = lib/fatfs/source
 
@@ -24,14 +24,4 @@ SRC_C += \
 # suppress warning caused by fatfs
 CFLAGS += -Wno-error=cast-qual
 
-# TinyUSB Host Stack source
-SRC_C += \
-	src/class/cdc/cdc_host.c \
-	src/class/hid/hid_host.c \
-	src/class/msc/msc_host.c \
-	src/host/hub.c \
-	src/host/usbh.c \
-	src/portable/ohci/ohci.c \
-	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
-
-include ../../rules.mk
+include ../../build_system/make/rules.mk
diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt
index fa9c14857..fee10f9e2 100644
--- a/examples/host/msc_file_explorer/only.txt
+++ b/examples/host/msc_file_explorer/only.txt
@@ -1,11 +1,14 @@
+mcu:KINETIS_KL
 mcu:LPC175X_6X
 mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
-mcu:MIMXRT
+mcu:MIMXRT1XXX
 mcu:MIMXRT10XX
 mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c
index 7b1c2ef27..73f3e9eb5 100644
--- a/examples/host/msc_file_explorer/src/main.c
+++ b/examples/host/msc_file_explorer/src/main.c
@@ -59,7 +59,7 @@
 #include <stdio.h>
 #include <string.h>
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 //--------------------------------------------------------------------+
@@ -80,6 +80,11 @@ int main(void)
 
   // init host stack on configured roothub port
   tuh_init(BOARD_TUH_RHPORT);
+
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   msc_app_init();
 
   while (1)
diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c
index 003e2865b..ecea614a2 100644
--- a/examples/host/msc_file_explorer/src/msc_app.c
+++ b/examples/host/msc_file_explorer/src/msc_app.c
@@ -25,7 +25,7 @@
 
 #include <ctype.h>
 #include "tusb.h"
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 
 #include "ff.h"
 #include "diskio.h"
@@ -66,7 +66,10 @@ bool msc_app_init(void)
   for(size_t i=0; i<CFG_TUH_DEVICE_MAX; i++) _disk_busy[i] = false;
 
   // disable stdout buffered for echoing typing command
+  #ifndef __ICCARM__ // TODO IAR doesn't support stream control ?
   setbuf(stdout, NULL);
+  #endif
+
   cli_init();
 
   return true;
diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h
index 1e0d067bf..c798b4383 100644
--- a/examples/host/msc_file_explorer/src/tusb_config.h
+++ b/examples/host/msc_file_explorer/src/tusb_config.h
@@ -30,28 +30,8 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------+
-// Board Specific Configuration
-//--------------------------------------------------------------------+
-
-#if CFG_TUSB_MCU == OPT_MCU_RP2040
-// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
-#define CFG_TUH_RPI_PIO_USB   0
-#define BOARD_TUH_RHPORT      CFG_TUH_RPI_PIO_USB
-#endif
-
-// RHPort number used for host can be defined by board.mk, default to port 0
-#ifndef BOARD_TUH_RHPORT
-#define BOARD_TUH_RHPORT      0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-#ifndef BOARD_TUH_MAX_SPEED
-#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
-#endif
-
 //--------------------------------------------------------------------
-// COMMON CONFIGURATION
+// Common Configuration
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
@@ -67,12 +47,6 @@
 #define CFG_TUSB_DEBUG        0
 #endif
 
-// Enable Host stack
-#define CFG_TUH_ENABLED       1
-
-// Default is max speed that hardware controller could support with on-chip PHY
-#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
-
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -85,11 +59,43 @@
 #endif
 
 #ifndef CFG_TUH_MEM_ALIGN
-#define CFG_TUH_MEM_ALIGN        __attribute__ ((aligned(4)))
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 //--------------------------------------------------------------------
-// CONFIGURATION
+// Driver Configuration
 //--------------------------------------------------------------------
 
 // Size of buffer to hold descriptors and other data used for enumeration