Merge branch 'master' into vendor_class_zero_length_transfer

45 files changed, 3762 insertions, 238 deletions

diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt
index c70d11d5b..e6a2ece14 100644
--- a/examples/host/CMakeLists.txt
+++ b/examples/host/CMakeLists.txt
@@ -1,9 +1,13 @@
-cmake_minimum_required(VERSION 3.5)
+cmake_minimum_required(VERSION 3.17)
 
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/${FAMILY}/family.cmake)
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake)
 
-project(tinyusb_host_examples)
+project(tinyusb_host_examples C CXX ASM)
 family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR})
 
 # family_add_subdirectory will filter what to actually add based on selected FAMILY
+family_add_subdirectory(bare_api)
 family_add_subdirectory(cdc_msc_hid)
+family_add_subdirectory(cdc_msc_hid_freertos)
+family_add_subdirectory(hid_controller)
+family_add_subdirectory(msc_file_explorer)
diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt
new file mode 100644
index 000000000..76182d6fa
--- /dev/null
+++ b/examples/host/bare_api/CMakeLists.txt
@@ -0,0 +1,32 @@
+cmake_minimum_required(VERSION 3.17)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT} C CXX ASM)
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} noos)
diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile
new file mode 100644
index 000000000..0235e08c3
--- /dev/null
+++ b/examples/host/bare_api/Makefile
@@ -0,0 +1,13 @@
+include ../../build_system/make/make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += \
+	src/main.c
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../build_system/make/rules.mk
diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt
new file mode 100644
index 000000000..fee10f9e2
--- /dev/null
+++ b/examples/host/bare_api/only.txt
@@ -0,0 +1,14 @@
+mcu:KINETIS_KL
+mcu:LPC175X_6X
+mcu:LPC177X_8X
+mcu:LPC18XX
+mcu:LPC40XX
+mcu:LPC43XX
+mcu:MIMXRT1XXX
+mcu:MIMXRT10XX
+mcu:MIMXRT11XX
+mcu:RP2040
+mcu:MSP432E4
+mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c
new file mode 100644
index 000000000..670e58498
--- /dev/null
+++ b/examples/host/bare_api/src/main.c
@@ -0,0 +1,425 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* This example current worked and tested with following controller
+ * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc
+ */
+
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board_api.h"
+#include "tusb.h"
+#include "class/hid/hid.h"
+
+// English
+#define LANGUAGE_ID 0x0409
+#define BUF_COUNT   4
+
+
+tusb_desc_device_t desc_device;
+
+uint8_t buf_pool[BUF_COUNT][64];
+uint8_t buf_owner[BUF_COUNT] = { 0 }; // device address that owns buffer
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+void led_blinking_task(void);
+
+static void print_utf16(uint16_t *temp_buf, size_t buf_len);
+void print_device_descriptor(tuh_xfer_t* xfer);
+void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg);
+
+uint8_t* get_hid_buf(uint8_t daddr);
+void free_hid_buf(uint8_t daddr);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  printf("TinyUSB Bare API Example\r\n");
+
+  // init host stack on configured roothub port
+  tuh_init(BOARD_TUH_RHPORT);
+
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
+  while (1)
+  {
+    // tinyusb host task
+    tuh_task();
+    led_blinking_task();
+  }
+
+  return 0;
+}
+
+/*------------- TinyUSB Callbacks -------------*/
+
+// Invoked when device is mounted (configured)
+void tuh_mount_cb (uint8_t daddr)
+{
+  printf("Device attached, address = %d\r\n", daddr);
+
+  // Get Device Descriptor
+  // TODO: invoking control transfer now has issue with mounting hub with multiple devices attached, fix later
+  tuh_descriptor_get_device(daddr, &desc_device, 18, print_device_descriptor, 0);
+}
+
+/// Invoked when device is unmounted (bus reset/unplugged)
+void tuh_umount_cb(uint8_t daddr)
+{
+  printf("Device removed, address = %d\r\n", daddr);
+  free_hid_buf(daddr);
+}
+
+//--------------------------------------------------------------------+
+// Device Descriptor
+//--------------------------------------------------------------------+
+
+void print_device_descriptor(tuh_xfer_t* xfer)
+{
+  if ( XFER_RESULT_SUCCESS != xfer->result )
+  {
+    printf("Failed to get device descriptor\r\n");
+    return;
+  }
+
+  uint8_t const daddr = xfer->daddr;
+
+  printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct);
+  printf("Device Descriptor:\r\n");
+  printf("  bLength             %u\r\n"     , desc_device.bLength);
+  printf("  bDescriptorType     %u\r\n"     , desc_device.bDescriptorType);
+  printf("  bcdUSB              %04x\r\n"   , desc_device.bcdUSB);
+  printf("  bDeviceClass        %u\r\n"     , desc_device.bDeviceClass);
+  printf("  bDeviceSubClass     %u\r\n"     , desc_device.bDeviceSubClass);
+  printf("  bDeviceProtocol     %u\r\n"     , desc_device.bDeviceProtocol);
+  printf("  bMaxPacketSize0     %u\r\n"     , desc_device.bMaxPacketSize0);
+  printf("  idVendor            0x%04x\r\n" , desc_device.idVendor);
+  printf("  idProduct           0x%04x\r\n" , desc_device.idProduct);
+  printf("  bcdDevice           %04x\r\n"   , desc_device.bcdDevice);
+
+  // Get String descriptor using Sync API
+  uint16_t temp_buf[128];
+
+  printf("  iManufacturer       %u     "     , desc_device.iManufacturer);
+  if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)) )
+  {
+    print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf));
+  }
+  printf("\r\n");
+
+  printf("  iProduct            %u     "     , desc_device.iProduct);
+  if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)))
+  {
+    print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf));
+  }
+  printf("\r\n");
+
+  printf("  iSerialNumber       %u     "     , desc_device.iSerialNumber);
+  if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)))
+  {
+    print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf));
+  }
+  printf("\r\n");
+
+  printf("  bNumConfigurations  %u\r\n"     , desc_device.bNumConfigurations);
+
+  // Get configuration descriptor with sync API
+  if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf)))
+  {
+    parse_config_descriptor(daddr, (tusb_desc_configuration_t*) temp_buf);
+  }
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+// count total length of an interface
+uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len);
+
+void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len);
+
+// simple configuration parser to open and listen to HID Endpoint IN
+void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg)
+{
+  uint8_t const* desc_end = ((uint8_t const*) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength);
+  uint8_t const* p_desc   = tu_desc_next(desc_cfg);
+
+  // parse each interfaces
+  while( p_desc < desc_end )
+  {
+    uint8_t assoc_itf_count = 1;
+
+    // Class will always starts with Interface Association (if any) and then Interface descriptor
+    if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) )
+    {
+      tusb_desc_interface_assoc_t const * desc_iad = (tusb_desc_interface_assoc_t const *) p_desc;
+      assoc_itf_count = desc_iad->bInterfaceCount;
+
+      p_desc = tu_desc_next(p_desc); // next to Interface
+    }
+
+    // must be interface from now
+    if( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) ) return;
+    tusb_desc_interface_t const* desc_itf = (tusb_desc_interface_t const*) p_desc;
+
+    uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end-p_desc));
+
+    // probably corrupted descriptor
+    if(drv_len < sizeof(tusb_desc_interface_t)) return;
+
+    // only open and listen to HID endpoint IN
+    if (desc_itf->bInterfaceClass == TUSB_CLASS_HID)
+    {
+      open_hid_interface(dev_addr, desc_itf, drv_len);
+    }
+
+    // next Interface or IAD descriptor
+    p_desc += drv_len;
+  }
+}
+
+uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len)
+{
+  uint8_t const* p_desc = (uint8_t const*) desc_itf;
+  uint16_t len = 0;
+
+  while (itf_count--)
+  {
+    // Next on interface desc
+    len += tu_desc_len(desc_itf);
+    p_desc = tu_desc_next(p_desc);
+
+    while (len < max_len)
+    {
+      // return on IAD regardless of itf count
+      if ( tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION ) return len;
+
+      if ( (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) &&
+           ((tusb_desc_interface_t const*) p_desc)->bAlternateSetting == 0 )
+      {
+        break;
+      }
+
+      len += tu_desc_len(p_desc);
+      p_desc = tu_desc_next(p_desc);
+    }
+  }
+
+  return len;
+}
+
+//--------------------------------------------------------------------+
+// HID Interface
+//--------------------------------------------------------------------+
+
+void hid_report_received(tuh_xfer_t* xfer);
+
+void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len)
+{
+  // len = interface + hid + n*endpoints
+  uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) +
+                                       desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t));
+
+  // corrupted descriptor
+  if (max_len < drv_len) return;
+
+  uint8_t const *p_desc = (uint8_t const *) desc_itf;
+
+  // HID descriptor
+  p_desc = tu_desc_next(p_desc);
+  tusb_hid_descriptor_hid_t const *desc_hid = (tusb_hid_descriptor_hid_t const *) p_desc;
+  if(HID_DESC_TYPE_HID != desc_hid->bDescriptorType) return;
+
+  // Endpoint descriptor
+  p_desc = tu_desc_next(p_desc);
+  tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc;
+
+  for(int i = 0; i < desc_itf->bNumEndpoints; i++)
+  {
+    if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) return;
+
+    if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN)
+    {
+      // skip if failed to open endpoint
+      if ( ! tuh_edpt_open(daddr, desc_ep) ) return;
+
+      uint8_t* buf = get_hid_buf(daddr);
+      if (!buf) return; // out of memory
+
+      tuh_xfer_t xfer =
+      {
+        .daddr       = daddr,
+        .ep_addr     = desc_ep->bEndpointAddress,
+        .buflen      = 64,
+        .buffer      = buf,
+        .complete_cb = hid_report_received,
+        .user_data   = (uintptr_t) buf, // since buffer is not available in callback, use user data to store the buffer
+      };
+
+      // submit transfer for this EP
+      tuh_edpt_xfer(&xfer);
+
+      printf("Listen to [dev %u: ep %02x]\r\n", daddr, desc_ep->bEndpointAddress);
+    }
+
+    p_desc = tu_desc_next(p_desc);
+    desc_ep = (tusb_desc_endpoint_t const *) p_desc;
+  }
+}
+
+void hid_report_received(tuh_xfer_t* xfer)
+{
+  // Note: not all field in xfer is available for use (i.e filled by tinyusb stack) in callback to save sram
+  // For instance, xfer->buffer is NULL. We have used user_data to store buffer when submitted callback
+  uint8_t* buf = (uint8_t*) xfer->user_data;
+
+  if (xfer->result == XFER_RESULT_SUCCESS)
+  {
+    printf("[dev %u: ep %02x] HID Report:", xfer->daddr, xfer->ep_addr);
+    for(uint32_t i=0; i<xfer->actual_len; i++)
+    {
+      if (i%16 == 0) printf("\r\n  ");
+      printf("%02X ", buf[i]);
+    }
+    printf("\r\n");
+  }
+
+  // continue to submit transfer, with updated buffer
+  // other field remain the same
+  xfer->buflen = 64;
+  xfer->buffer = buf;
+
+  tuh_edpt_xfer(xfer);
+}
+
+//--------------------------------------------------------------------+
+// Buffer helper
+//--------------------------------------------------------------------+
+
+// get an buffer from pool
+uint8_t* get_hid_buf(uint8_t daddr)
+{
+  for(size_t i=0; i<BUF_COUNT; i++)
+  {
+    if (buf_owner[i] == 0)
+    {
+      buf_owner[i] = daddr;
+      return buf_pool[i];
+    }
+  }
+
+  // out of memory, increase BUF_COUNT
+  return NULL;
+}
+
+// free all buffer owned by device
+void free_hid_buf(uint8_t daddr)
+{
+  for(size_t i=0; i<BUF_COUNT; i++)
+  {
+    if (buf_owner[i] == daddr) buf_owner[i] = 0;
+  }
+}
+
+//--------------------------------------------------------------------+
+// Blinking Task
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  const uint32_t interval_ms = 1000;
+  static uint32_t start_ms = 0;
+
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
+
+//--------------------------------------------------------------------+
+// String Descriptor Helper
+//--------------------------------------------------------------------+
+
+static void _convert_utf16le_to_utf8(const uint16_t *utf16, size_t utf16_len, uint8_t *utf8, size_t utf8_len) {
+    // TODO: Check for runover.
+    (void)utf8_len;
+    // Get the UTF-16 length out of the data itself.
+
+    for (size_t i = 0; i < utf16_len; i++) {
+        uint16_t chr = utf16[i];
+        if (chr < 0x80) {
+            *utf8++ = chr & 0xffu;
+        } else if (chr < 0x800) {
+            *utf8++ = (uint8_t)(0xC0 | (chr >> 6 & 0x1F));
+            *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F));
+        } else {
+            // TODO: Verify surrogate.
+            *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F));
+            *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F));
+            *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F));
+        }
+        // TODO: Handle UTF-16 code points that take two entries.
+    }
+}
+
+// Count how many bytes a utf-16-le encoded string will take in utf-8.
+static int _count_utf8_bytes(const uint16_t *buf, size_t len) {
+    size_t total_bytes = 0;
+    for (size_t i = 0; i < len; i++) {
+        uint16_t chr = buf[i];
+        if (chr < 0x80) {
+            total_bytes += 1;
+        } else if (chr < 0x800) {
+            total_bytes += 2;
+        } else {
+            total_bytes += 3;
+        }
+        // TODO: Handle UTF-16 code points that take two entries.
+    }
+    return (int) total_bytes;
+}
+
+static void print_utf16(uint16_t *temp_buf, size_t buf_len) {
+    if ((temp_buf[0] & 0xff) == 0) return;  // empty
+    size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t);
+    size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len);
+    _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len);
+    ((uint8_t*) temp_buf)[utf8_len] = '\0';
+
+    printf("%s", (char*)temp_buf);
+}
diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h
new file mode 100644
index 000000000..432446e94
--- /dev/null
+++ b/examples/host/bare_api/src/tusb_config.h
@@ -0,0 +1,121 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUH_MEM_SECTION
+#define CFG_TUH_MEM_SECTION
+#endif
+
+#ifndef CFG_TUH_MEM_ALIGN
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// Driver Configuration
+//--------------------------------------------------------------------
+
+// Size of buffer to hold descriptors and other data used for enumeration
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+
+// only hub class is enabled
+#define CFG_TUH_HUB                 1
+
+// max device support (excluding hub device)
+// 1 hub typically has 4 ports
+#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)
+
+// Max endpoint per device
+#define CFG_TUH_ENDPOINT_MAX        8
+
+// Enable tuh_edpt_xfer() API
+#define CFG_TUH_API_EDPT_XFER       1
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */
diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X b/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/host/cdc_msc_hid/.only.MCU_LPC175X_6X
+++ /dev/null
diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X b/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/host/cdc_msc_hid/.only.MCU_LPC177X_8X
+++ /dev/null
diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC18XX b/examples/host/cdc_msc_hid/.only.MCU_LPC18XX
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/host/cdc_msc_hid/.only.MCU_LPC18XX
+++ /dev/null
diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC40XX b/examples/host/cdc_msc_hid/.only.MCU_LPC40XX
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/host/cdc_msc_hid/.only.MCU_LPC40XX
+++ /dev/null
diff --git a/examples/host/cdc_msc_hid/.only.MCU_LPC43XX b/examples/host/cdc_msc_hid/.only.MCU_LPC43XX
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/host/cdc_msc_hid/.only.MCU_LPC43XX
+++ /dev/null
diff --git a/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX b/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/host/cdc_msc_hid/.only.MCU_MIMXRT10XX
+++ /dev/null
diff --git a/examples/host/cdc_msc_hid/.only.MCU_RP2040 b/examples/host/cdc_msc_hid/.only.MCU_RP2040
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/host/cdc_msc_hid/.only.MCU_RP2040
+++ /dev/null
diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt
index ad0f412e2..a7c372a34 100644
--- a/examples/host/cdc_msc_hid/CMakeLists.txt
+++ b/examples/host/cdc_msc_hid/CMakeLists.txt
@@ -1,29 +1,35 @@
-cmake_minimum_required(VERSION 3.5)
+cmake_minimum_required(VERSION 3.17)
 
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
 
 # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
 family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
 
-project(${PROJECT})
+project(${PROJECT} C CXX ASM)
 
 # Checks this example is valid for the family and initializes the project
 family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
 
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
 add_executable(${PROJECT})
 
 # Example source
 target_sources(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
-        )
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
+  )
 
 # Example include
 target_include_directories(${PROJECT} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+  )
 
-# Configure compilation flags and libraries for the example... see the corresponding function
-# in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
\ No newline at end of file
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} noos)
diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile
index 6a2b4d902..213c02f9c 100644
--- a/examples/host/cdc_msc_hid/Makefile
+++ b/examples/host/cdc_msc_hid/Makefile
@@ -1,27 +1,16 @@
-include ../../../tools/top.mk
-include ../../make.mk
+include ../../build_system/make/make.mk
 
 INC += \
 	src \
 	$(TOP)/hw \
 
 # Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-CFLAGS += -Wno-error=cast-align
+EXAMPLE_SOURCE = \
+  src/cdc_app.c \
+  src/hid_app.c \
+  src/main.c \
+  src/msc_app.c \
 
-# TinyUSB Host Stack source
-SRC_C += \
-	src/class/cdc/cdc_host.c \
-	src/class/hid/hid_host.c \
-	src/class/msc/msc_host.c \
-	src/host/hub.c \
-	src/host/usbh.c \
-	src/host/usbh_control.c \
-	src/portable/ehci/ehci.c \
-	src/portable/ohci/ohci.c \
-	src/portable/nxp/transdimension/hcd_transdimension.c \
-	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-include ../../rules.mk
+include ../../build_system/make/rules.mk
diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt
new file mode 100644
index 000000000..fee10f9e2
--- /dev/null
+++ b/examples/host/cdc_msc_hid/only.txt
@@ -0,0 +1,14 @@
+mcu:KINETIS_KL
+mcu:LPC175X_6X
+mcu:LPC177X_8X
+mcu:LPC18XX
+mcu:LPC40XX
+mcu:LPC43XX
+mcu:MIMXRT1XXX
+mcu:MIMXRT10XX
+mcu:MIMXRT11XX
+mcu:RP2040
+mcu:MSP432E4
+mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c
new file mode 100644
index 000000000..4a13f8b27
--- /dev/null
+++ b/examples/host/cdc_msc_hid/src/cdc_app.c
@@ -0,0 +1,109 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb.h"
+#include "bsp/board_api.h"
+
+size_t get_console_inputs(uint8_t* buf, size_t bufsize) {
+  size_t count = 0;
+  while (count < bufsize) {
+    int ch = board_getchar();
+    if (ch <= 0) break;
+
+    buf[count] = (uint8_t) ch;
+    count++;
+  }
+
+  return count;
+}
+
+void cdc_app_task(void) {
+  uint8_t buf[64 + 1]; // +1 for extra null character
+  uint32_t const bufsize = sizeof(buf) - 1;
+
+  uint32_t count = get_console_inputs(buf, bufsize);
+  buf[count] = 0;
+
+  // loop over all mounted interfaces
+  for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) {
+    if (tuh_cdc_mounted(idx)) {
+      // console --> cdc interfaces
+      if (count) {
+        tuh_cdc_write(idx, buf, count);
+        tuh_cdc_write_flush(idx);
+      }
+    }
+  }
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when received new data
+void tuh_cdc_rx_cb(uint8_t idx) {
+  uint8_t buf[64 + 1]; // +1 for extra null character
+  uint32_t const bufsize = sizeof(buf) - 1;
+
+  // forward cdc interfaces -> console
+  uint32_t count = tuh_cdc_read(idx, buf, bufsize);
+  buf[count] = 0;
+
+  printf("%s", (char*) buf);
+}
+
+// Invoked when a device with CDC interface is mounted
+// idx is index of cdc interface in the internal pool.
+void tuh_cdc_mount_cb(uint8_t idx) {
+  tuh_itf_info_t itf_info = {0};
+  tuh_cdc_itf_get_info(idx, &itf_info);
+
+  printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr,
+         itf_info.desc.bInterfaceNumber);
+
+#ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM
+  // If CFG_TUH_CDC_LINE_CODING_ON_ENUM is defined, line coding will be set by tinyusb stack
+  // while eneumerating new cdc device
+  cdc_line_coding_t line_coding = {0};
+  if (tuh_cdc_get_local_line_coding(idx, &line_coding)) {
+    printf("  Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits);
+    printf("  Parity  : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits);
+  }
+#else
+  // Set Line Coding upon mounted
+  cdc_line_coding_t new_line_coding = { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 };
+  tuh_cdc_set_line_coding(idx, &new_line_coding, NULL, 0);
+#endif
+}
+
+// Invoked when a device with CDC interface is unmounted
+void tuh_cdc_umount_cb(uint8_t idx) {
+  tuh_itf_info_t itf_info = {0};
+  tuh_cdc_itf_get_info(idx, &itf_info);
+
+  printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr,
+         itf_info.desc.bInterfaceNumber);
+}
diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c
index 23ab12404..f0d42a08f 100644
--- a/examples/host/cdc_msc_hid/src/hid_app.c
+++ b/examples/host/cdc_msc_hid/src/hid_app.c
@@ -23,14 +23,15 @@
  *
  */
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 //--------------------------------------------------------------------+
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION
 //--------------------------------------------------------------------+
 
-// If your host terminal support ansi escape code, it can be use to simulate mouse cursor
+// If your host terminal support ansi escape code such as TeraTerm
+// it can be use to simulate mouse cursor movement within terminal
 #define USE_ANSI_ESCAPE   0
 
 #define MAX_REPORT  4
@@ -38,11 +39,15 @@
 static uint8_t const keycode2ascii[128][2] =  { HID_KEYCODE_TO_ASCII };
 
 // Each HID instance can has multiple reports
-static uint8_t _report_count[CFG_TUH_HID];
-static tuh_hid_report_info_t _report_info_arr[CFG_TUH_HID][MAX_REPORT];
+static struct
+{
+  uint8_t report_count;
+  tuh_hid_report_info_t report_info[MAX_REPORT];
+}hid_info[CFG_TUH_HID];
 
 static void process_kbd_report(hid_keyboard_report_t const *report);
 static void process_mouse_report(hid_mouse_report_t const * report);
+static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len);
 
 void hid_app_task(void)
 {
@@ -56,17 +61,32 @@ void hid_app_task(void)
 // Invoked when device with hid interface is mounted
 // Report descriptor is also available for use. tuh_hid_parse_report_descriptor()
 // can be used to parse common/simple enough descriptor.
+// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped
+// therefore report_desc = NULL, desc_len = 0
 void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len)
 {
   printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance);
 
-  // Interface protocol
-  const char* protocol_str[] = { "None", "Keyboard", "Mouse" }; // hid_protocol_type_t
-  uint8_t const interface_protocol = tuh_hid_interface_protocol(dev_addr, instance);
+  // Interface protocol (hid_interface_protocol_enum_t)
+  const char* protocol_str[] = { "None", "Keyboard", "Mouse" };
+  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
+
+  printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]);
 
-  // Parse report descriptor with built-in parser
-  _report_count[instance] = tuh_hid_parse_report_descriptor(_report_info_arr[instance], MAX_REPORT, desc_report, desc_len);
-  printf("HID has %u reports and interface protocol = %s\r\n", _report_count[instance], protocol_str[interface_protocol]);
+  // By default host stack will use activate boot protocol on supported interface.
+  // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser)
+  if ( itf_protocol == HID_ITF_PROTOCOL_NONE )
+  {
+    hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT, desc_report, desc_len);
+    printf("HID has %u reports \r\n", hid_info[instance].report_count);
+  }
+
+  // request to receive report
+  // tuh_hid_report_received_cb() will be invoked when report is available
+  if ( !tuh_hid_receive_report(dev_addr, instance) )
+  {
+    printf("Error: cannot request to receive report\r\n");
+  }
 }
 
 // Invoked when device with hid interface is un-mounted
@@ -78,59 +98,30 @@ void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance)
 // Invoked when received report from device via interrupt endpoint
 void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len)
 {
-  (void) dev_addr;
-
-  uint8_t const rpt_count = _report_count[instance];
-  tuh_hid_report_info_t* rpt_info_arr = _report_info_arr[instance];
-  tuh_hid_report_info_t* rpt_info = NULL;
+  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
 
-  if ( rpt_count == 1 && rpt_info_arr[0].report_id == 0)
-  {
-    // Simple report without report ID as 1st byte
-    rpt_info = &rpt_info_arr[0];
-  }else
+  switch (itf_protocol)
   {
-    // Composite report, 1st byte is report ID, data starts from 2nd byte
-    uint8_t const rpt_id = report[0];
-
-    // Find report id in the arrray
-    for(uint8_t i=0; i<rpt_count; i++)
-    {
-      if (rpt_id == rpt_info_arr[i].report_id )
-      {
-        rpt_info = &rpt_info_arr[i];
-        break;
-      }
-    }
+    case HID_ITF_PROTOCOL_KEYBOARD:
+      TU_LOG2("HID receive boot keyboard report\r\n");
+      process_kbd_report( (hid_keyboard_report_t const*) report );
+    break;
 
-    report++;
-    len--;
-  }
+    case HID_ITF_PROTOCOL_MOUSE:
+      TU_LOG2("HID receive boot mouse report\r\n");
+      process_mouse_report( (hid_mouse_report_t const*) report );
+    break;
 
-  if (!rpt_info)
-  {
-    printf("Couldn't find the report info for this report !\r\n");
-    return;
+    default:
+      // Generic report requires matching ReportID and contents with previous parsed report info
+      process_generic_report(dev_addr, instance, report, len);
+    break;
   }
 
-  if ( rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP )
+  // continue to request to receive report
+  if ( !tuh_hid_receive_report(dev_addr, instance) )
   {
-    switch (rpt_info->usage)
-    {
-      case HID_USAGE_DESKTOP_KEYBOARD:
-        TU_LOG1("HID receive keyboard report\r\n");
-        // Assume keyboard follow boot report layout
-        process_kbd_report( (hid_keyboard_report_t const*) report );
-      break;
-
-      case HID_USAGE_DESKTOP_MOUSE:
-        TU_LOG1("HID receive mouse report\r\n");
-        // Assume mouse follow boot report layout
-        process_mouse_report( (hid_mouse_report_t const*) report );
-      break;
-
-      default: break;
-    }
+    printf("Error: cannot request to receive report\r\n");
   }
 }
 
@@ -164,12 +155,14 @@ static void process_kbd_report(hid_keyboard_report_t const *report)
       }else
       {
         // not existed in previous report means the current key is pressed
-        bool const is_shift =  report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT);
+        bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT);
         uint8_t ch = keycode2ascii[report->keycode[i]][is_shift ? 1 : 0];
         putchar(ch);
         if ( ch == '\r' ) putchar('\n'); // added new line for enter key
 
+        #ifndef __ICCARM__ // TODO IAR doesn't support stream control ?
         fflush(stdout); // flush right away, else nanolib will wait for newline
+        #endif
       }
     }
     // TODO example skips key released
@@ -235,3 +228,71 @@ static void process_mouse_report(hid_mouse_report_t const * report)
   //------------- cursor movement -------------//
   cursor_movement(report->x, report->y, report->wheel);
 }
+
+//--------------------------------------------------------------------+
+// Generic Report
+//--------------------------------------------------------------------+
+static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len)
+{
+  (void) dev_addr;
+
+  uint8_t const rpt_count = hid_info[instance].report_count;
+  tuh_hid_report_info_t* rpt_info_arr = hid_info[instance].report_info;
+  tuh_hid_report_info_t* rpt_info = NULL;
+
+  if ( rpt_count == 1 && rpt_info_arr[0].report_id == 0)
+  {
+    // Simple report without report ID as 1st byte
+    rpt_info = &rpt_info_arr[0];
+  }else
+  {
+    // Composite report, 1st byte is report ID, data starts from 2nd byte
+    uint8_t const rpt_id = report[0];
+
+    // Find report id in the array
+    for(uint8_t i=0; i<rpt_count; i++)
+    {
+      if (rpt_id == rpt_info_arr[i].report_id )
+      {
+        rpt_info = &rpt_info_arr[i];
+        break;
+      }
+    }
+
+    report++;
+    len--;
+  }
+
+  if (!rpt_info)
+  {
+    printf("Couldn't find report info !\r\n");
+    return;
+  }
+
+  // For complete list of Usage Page & Usage checkout src/class/hid/hid.h. For examples:
+  // - Keyboard                     : Desktop, Keyboard
+  // - Mouse                        : Desktop, Mouse
+  // - Gamepad                      : Desktop, Gamepad
+  // - Consumer Control (Media Key) : Consumer, Consumer Control
+  // - System Control (Power key)   : Desktop, System Control
+  // - Generic (vendor)             : 0xFFxx, xx
+  if ( rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP )
+  {
+    switch (rpt_info->usage)
+    {
+      case HID_USAGE_DESKTOP_KEYBOARD:
+        TU_LOG1("HID receive keyboard report\r\n");
+        // Assume keyboard follow boot report layout
+        process_kbd_report( (hid_keyboard_report_t const*) report );
+      break;
+
+      case HID_USAGE_DESKTOP_MOUSE:
+        TU_LOG1("HID receive mouse report\r\n");
+        // Assume mouse follow boot report layout
+        process_mouse_report( (hid_mouse_report_t const*) report );
+      break;
+
+      default: break;
+    }
+  }
+}
diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c
index 7ae814e38..a3b80e030 100644
--- a/examples/host/cdc_msc_hid/src/main.c
+++ b/examples/host/cdc_msc_hid/src/main.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -27,127 +27,79 @@
 #include <stdio.h>
 #include <string.h>
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF PROTYPES
 //--------------------------------------------------------------------+
-void print_greeting(void);
 void led_blinking_task(void);
-
-extern void cdc_task(void);
+extern void cdc_app_task(void);
 extern void hid_app_task(void);
 
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+// API to read/rite MAX3421's register. Implemented by TinyUSB
+extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr);
+extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr);
+#endif
+
 /*------------- MAIN -------------*/
-int main(void)
-{
+int main(void) {
   board_init();
-  print_greeting();
 
-  tusb_init();
+  printf("TinyUSB Host CDC MSC HID Example\r\n");
 
-  while (1)
-  {
-    // tinyusb host task
-    tuh_task();
-    led_blinking_task();
+  // init host stack on configured roothub port
+  tuh_init(BOARD_TUH_RHPORT);
+
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
 
-#if CFG_TUH_CDC
-    cdc_task();
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+  // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable
+  enum { IOPINS1_ADDR  = 20u << 3, /* 0xA0 */ };
+  tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false);
 #endif
 
-#if CFG_TUH_HID
+  while (1) {
+    // tinyusb host task
+    tuh_task();
+
+    led_blinking_task();
+    cdc_app_task();
     hid_app_task();
-#endif
   }
-
-  return 0;
 }
 
 //--------------------------------------------------------------------+
-// USB CDC
+// TinyUSB Callbacks
 //--------------------------------------------------------------------+
-#if CFG_TUH_CDC
-CFG_TUSB_MEM_SECTION static char serial_in_buffer[64] = { 0 };
 
-void tuh_mount_cb(uint8_t dev_addr)
-{
+void tuh_mount_cb(uint8_t dev_addr) {
   // application set-up
   printf("A device with address %d is mounted\r\n", dev_addr);
-
-  tuh_cdc_receive(dev_addr, serial_in_buffer, sizeof(serial_in_buffer), true); // schedule first transfer
 }
 
-void tuh_umount_cb(uint8_t dev_addr)
-{
+void tuh_umount_cb(uint8_t dev_addr) {
   // application tear-down
   printf("A device with address %d is unmounted \r\n", dev_addr);
 }
 
-// invoked ISR context
-void tuh_cdc_xfer_isr(uint8_t dev_addr, xfer_result_t event, cdc_pipeid_t pipe_id, uint32_t xferred_bytes)
-{
-  (void) event;
-  (void) pipe_id;
-  (void) xferred_bytes;
-
-  printf(serial_in_buffer);
-  tu_memclr(serial_in_buffer, sizeof(serial_in_buffer));
-
-  tuh_cdc_receive(dev_addr, serial_in_buffer, sizeof(serial_in_buffer), true); // waiting for next data
-}
-
-void cdc_task(void)
-{
-
-}
-
-#endif
-
-//--------------------------------------------------------------------+
-// TinyUSB Callbacks
-//--------------------------------------------------------------------+
 
 //--------------------------------------------------------------------+
 // Blinking Task
 //--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
+void led_blinking_task(void) {
   const uint32_t interval_ms = 1000;
   static uint32_t start_ms = 0;
 
   static bool led_state = false;
 
   // Blink every interval ms
-  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  if (board_millis() - start_ms < interval_ms) return; // not enough time
   start_ms += interval_ms;
 
   board_led_write(led_state);
   led_state = 1 - led_state; // toggle
 }
-
-//--------------------------------------------------------------------+
-// HELPER FUNCTION
-//--------------------------------------------------------------------+
-void print_greeting(void)
-{
-  char const * const rtos_name[] =
-  {
-      [OPT_OS_NONE]      = "None",
-      [OPT_OS_FREERTOS]  = "FreeRTOS",
-      [OPT_OS_MYNEWT]    = "Mynewt OS",
-      [OPT_OS_CUSTOM]    = "Custom OS implemnted by application",
-      [OPT_OS_PICO]      = "Raspberry Pi Pico SDK",
-      [OPT_OS_RTTHREAD]  = "RT-Thread"
-  };
-
-  printf("----------------------------------------------------\r\n");
-  printf("TinyUSB Host Example\r\n");
-  printf("If you find any bugs or problems, feel free to open\r\n");
-  printf("an issue at https://github.com/hathach/tinyusb\r\n");
-  printf("----------------------------------------------------\r\n\r\n");
-
-  printf("This Host demo is configured to support:\r\n");
-  printf("  - RTOS = %s\r\n", rtos_name[CFG_TUSB_OS]);
-}
diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c
index 3657a3d35..1d7e18e6e 100644
--- a/examples/host/cdc_msc_hid/src/msc_app.c
+++ b/examples/host/cdc_msc_hid/src/msc_app.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -25,15 +25,16 @@
 
 #include "tusb.h"
 
-#if CFG_TUH_MSC
-
 //--------------------------------------------------------------------+
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION
 //--------------------------------------------------------------------+
 static scsi_inquiry_resp_t inquiry_resp;
 
-bool inquiry_complete_cb(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw)
+bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data)
 {
+  msc_cbw_t const* cbw = cb_data->cbw;
+  msc_csw_t const* csw = cb_data->csw;
+
   if (csw->status != 0)
   {
     printf("Inquiry failed\r\n");
@@ -47,8 +48,8 @@ bool inquiry_complete_cb(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const
   uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun);
   uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun);
 
-  printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size));
-  printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size);
+  printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size));
+  printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size);
 
   return true;
 }
@@ -59,48 +60,11 @@ void tuh_msc_mount_cb(uint8_t dev_addr)
   printf("A MassStorage device is mounted\r\n");
 
   uint8_t const lun = 0;
-  tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb);
-//
-//  //------------- file system (only 1 LUN support) -------------//
-//  uint8_t phy_disk = dev_addr-1;
-//  disk_initialize(phy_disk);
-//
-//  if ( disk_is_ready(phy_disk) )
-//  {
-//    if ( f_mount(phy_disk, &fatfs[phy_disk]) != FR_OK )
-//    {
-//      puts("mount failed");
-//      return;
-//    }
-//
-//    f_chdrive(phy_disk); // change to newly mounted drive
-//    f_chdir("/"); // root as current dir
-//
-//    cli_init();
-//  }
+  tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb, 0);
 }
 
 void tuh_msc_umount_cb(uint8_t dev_addr)
 {
   (void) dev_addr;
   printf("A MassStorage device is unmounted\r\n");
-
-//  uint8_t phy_disk = dev_addr-1;
-//
-//  f_mount(phy_disk, NULL); // unmount disk
-//  disk_deinitialize(phy_disk);
-//
-//  if ( phy_disk == f_get_current_drive() )
-//  { // active drive is unplugged --> change to other drive
-//    for(uint8_t i=0; i<CFG_TUSB_HOST_DEVICE_MAX; i++)
-//    {
-//      if ( disk_is_ready(i) )
-//      {
-//        f_chdrive(i);
-//        cli_init(); // refractor, rename
-//      }
-//    }
-//  }
 }
-
-#endif
diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h
index 8253964c0..a59a0ffb9 100644
--- a/examples/host/cdc_msc_hid/src/tusb_config.h
+++ b/examples/host/cdc_msc_hid/src/tusb_config.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -31,26 +31,21 @@
 #endif
 
 //--------------------------------------------------------------------
-// COMMON CONFIGURATION
+// Common Configuration
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
 #ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-  #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
-#else
-  #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_HOST
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -59,32 +54,79 @@
  * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
  * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
  */
-#ifndef CFG_TUSB_MEM_SECTION
-#define CFG_TUSB_MEM_SECTION
+#ifndef CFG_TUH_MEM_SECTION
+#define CFG_TUH_MEM_SECTION
 #endif
 
-#ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#ifndef CFG_TUH_MEM_ALIGN
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
-// CONFIGURATION
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// Driver Configuration
 //--------------------------------------------------------------------
 
 // Size of buffer to hold descriptors and other data used for enumeration
-#define CFG_TUH_ENUMERATION_BUFSZIE 256
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
 
-#define CFG_TUH_HUB                 1
-#define CFG_TUH_CDC                 1
-#define CFG_TUH_HID                 2
+#define CFG_TUH_HUB                 1 // number of supported hubs
+#define CFG_TUH_CDC                 1 // CDC ACM
+#define CFG_TUH_CDC_FTDI            1 // FTDI Serial.  FTDI is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_CDC_CP210X          1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_CDC_CH34X           1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_HID                 (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces
 #define CFG_TUH_MSC                 1
 #define CFG_TUH_VENDOR              0
 
-#define CFG_TUSB_HOST_DEVICE_MAX    (CFG_TUH_HUB ? 5 : 1) // normal hub has 4 ports
+// max device support (excluding hub device): 1 hub typically has 4 ports
+#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)
 
 //------------- HID -------------//
+#define CFG_TUH_HID_EPIN_BUFSIZE    64
+#define CFG_TUH_HID_EPOUT_BUFSIZE   64
+
+//------------- CDC -------------//
+
+// Set Line Control state on enumeration/mounted:
+// DTR ( bit 0), RTS (bit 1)
+#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM    0x03
+
+// Set Line Coding on enumeration/mounted, value for cdc_line_coding_t
+// bit rate = 115200, 1 stop bit, no parity, 8 bit data width
+#define CFG_TUH_CDC_LINE_CODING_ON_ENUM   { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }
 
-#define CFG_TUH_HID_EP_BUFSIZE      64
 
 #ifdef __cplusplus
  }
diff --git a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt
new file mode 100644
index 000000000..2e95a18e0
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt
@@ -0,0 +1,36 @@
+cmake_minimum_required(VERSION 3.17)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT} C CXX ASM)
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/freertos_hook.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
+  )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+  )
+
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} freertos)
diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile
new file mode 100644
index 000000000..bf4725f47
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/Makefile
@@ -0,0 +1,34 @@
+include ../../build_system/make/make.mk
+
+FREERTOS_SRC = lib/FreeRTOS-Kernel
+FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC)
+
+INC += \
+	src \
+	src/FreeRTOSConfig \
+	$(TOP)/hw \
+	$(TOP)/$(FREERTOS_SRC)/include \
+	$(TOP)/$(FREERTOS_PORTABLE_SRC) \
+
+# Example source
+EXAMPLE_SOURCE = \
+  src/cdc_app.c \
+  src/freertos_hook.c \
+  src/hid_app.c \
+  src/main.c \
+  src/msc_app.c \
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+# FreeRTOS source, all files in port folder
+SRC_C += \
+	$(FREERTOS_SRC)/list.c \
+	$(FREERTOS_SRC)/queue.c \
+	$(FREERTOS_SRC)/tasks.c \
+	$(FREERTOS_SRC)/timers.c \
+	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c))
+
+SRC_S += \
+	$(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s))
+
+include ../../build_system/make/rules.mk
diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt
new file mode 100644
index 000000000..81d993ffa
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/only.txt
@@ -0,0 +1,12 @@
+mcu:LPC175X_6X
+mcu:LPC177X_8X
+mcu:LPC18XX
+mcu:LPC40XX
+mcu:LPC43XX
+mcu:MIMXRT1XXX
+mcu:MIMXRT10XX
+mcu:MIMXRT11XX
+mcu:MSP432E4
+mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/cdc_msc_hid_freertos/skip.txt b/examples/host/cdc_msc_hid_freertos/skip.txt
new file mode 100644
index 000000000..2ba4438fd
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/skip.txt
@@ -0,0 +1 @@
+mcu:RP2040
diff --git a/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt
new file mode 100644
index 000000000..6f057c106
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt
@@ -0,0 +1,6 @@
+# This file is for ESP-IDF only
+idf_component_register(SRCS "cdc_app.c" "hid_app.c" "main.c" "msc_app.c"
+                    INCLUDE_DIRS "."
+                    REQUIRES boards tinyusb_src)
+
+target_compile_options(${COMPONENT_LIB} PRIVATE -Wno-error=format)
diff --git a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..bd754518d
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,199 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+
+// Include MCU header
+#include "bsp/board_mcu.h"
+
+#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
+  #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
+#endif
+
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wredundant-decls"
+#endif
+
+// TODO fix later
+// FIXME cause redundant-decls warnings
+#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
+  extern u32 SystemCoreClock;
+#else
+  extern uint32_t SystemCoreClock;
+#endif
+
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      0
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */
diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c
new file mode 100644
index 000000000..f3495ab28
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c
@@ -0,0 +1,145 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb.h"
+#include "bsp/board_api.h"
+
+#if TUP_MCU_ESPRESSIF
+// ESP-IDF need "freertos/" prefix in include path.
+// CFG_TUSB_OS_INC_PATH should be defined accordingly.
+  #include "freertos/FreeRTOS.h"
+  #include "freertos/semphr.h"
+  #include "freertos/queue.h"
+  #include "freertos/task.h"
+  #include "freertos/timers.h"
+
+  #define CDC_STACK_SZIE      2048
+#else
+  #include "FreeRTOS.h"
+  #include "semphr.h"
+  #include "queue.h"
+  #include "task.h"
+  #include "timers.h"
+
+  #define CDC_STACK_SZIE     (3*configMINIMAL_STACK_SIZE/2)
+#endif
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+#if configSUPPORT_STATIC_ALLOCATION
+StackType_t  cdc_stack[CDC_STACK_SZIE];
+StaticTask_t cdc_taskdef;
+#endif
+
+static void cdc_app_task(void* param);
+
+void cdc_app_init(void) {
+  #if configSUPPORT_STATIC_ALLOCATION
+  xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef);
+  #else
+  xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL);
+  #endif
+}
+
+// helper
+size_t get_console_inputs(uint8_t *buf, size_t bufsize) {
+  size_t count = 0;
+  while (count < bufsize) {
+    int ch = board_getchar();
+    if (ch <= 0) break;
+
+    buf[count] = (uint8_t) ch;
+    count++;
+  }
+
+  return count;
+}
+
+static void cdc_app_task(void* param) {
+  (void) param;
+
+  uint8_t buf[64 + 1]; // +1 for extra null character
+  uint32_t const bufsize = sizeof(buf) - 1;
+
+  while (1) {
+    uint32_t count = get_console_inputs(buf, bufsize);
+    buf[count] = 0;
+
+    if (count) {
+      // loop over all mounted interfaces
+      for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) {
+        if (tuh_cdc_mounted(idx)) {
+          // console --> cdc interfaces
+          tuh_cdc_write(idx, buf, count);
+          tuh_cdc_write_flush(idx);
+        }
+      }
+    }
+
+    vTaskDelay(1);
+  }
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when received new data
+void tuh_cdc_rx_cb(uint8_t idx) {
+  uint8_t buf[64 + 1]; // +1 for extra null character
+  uint32_t const bufsize = sizeof(buf) - 1;
+
+  // forward cdc interfaces -> console
+  uint32_t count = tuh_cdc_read(idx, buf, bufsize);
+  buf[count] = 0;
+
+  printf("%s", (char *) buf);
+}
+
+void tuh_cdc_mount_cb(uint8_t idx) {
+  tuh_itf_info_t itf_info = { 0 };
+  tuh_cdc_itf_get_info(idx, &itf_info);
+
+  printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber);
+
+#ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM
+  // CFG_TUH_CDC_LINE_CODING_ON_ENUM must be defined for line coding is set by tinyusb in enumeration
+  // otherwise you need to call tuh_cdc_set_line_coding() first
+  cdc_line_coding_t line_coding = { 0 };
+  if (tuh_cdc_get_local_line_coding(idx, &line_coding)) {
+    printf("  Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits);
+    printf("  Parity  : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits);
+  }
+#endif
+}
+
+void tuh_cdc_umount_cb(uint8_t idx) {
+  tuh_itf_info_t itf_info = { 0 };
+  tuh_cdc_itf_get_info(idx, &itf_info);
+
+  printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber);
+}
diff --git a/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c b/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c
new file mode 100644
index 000000000..07d159fd5
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c
@@ -0,0 +1,111 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+//--------------------------------------------------------------------+
+// INCLUDE
+//--------------------------------------------------------------------+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "common/tusb_common.h"
+
+void vApplicationMallocFailedHook(void) {
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false,);
+}
+
+void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) {
+  (void) pxTask;
+  (void) pcTaskName;
+
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false,);
+}
+
+/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
+ * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
+ * used by the Idle task. */
+void vApplicationGetIdleTaskMemory(StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer,
+                                   uint32_t *pulIdleTaskStackSize) {
+  /* If the buffers to be provided to the Idle task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xIdleTaskTCB;
+  static StackType_t uxIdleTaskStack[configMINIMAL_STACK_SIZE];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
+    state will be stored. */
+  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
+
+  /* Pass out the array that will be used as the Idle task's stack. */
+  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
+  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
+}
+
+/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
+ * application must provide an implementation of vApplicationGetTimerTaskMemory()
+ * to provide the memory that is used by the Timer service task. */
+void vApplicationGetTimerTaskMemory(StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer,
+                                    uint32_t *pulTimerTaskStackSize) {
+  /* If the buffers to be provided to the Timer task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xTimerTaskTCB;
+  static StackType_t uxTimerTaskStack[configTIMER_TASK_STACK_DEPTH];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Timer
+    task's state will be stored. */
+  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
+
+  /* Pass out the array that will be used as the Timer task's stack. */
+  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
+  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
+}
+
+#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X
+#include "iodefine.h"
+void vApplicationSetupTimerInterrupt(void)
+{
+  /* Enable CMT0 */
+  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
+  MSTP(CMT0)       = 0;
+  SYSTEM.PRCR.WORD = (0xA5u<<8);
+
+  CMT0.CMCNT      = 0;
+  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
+  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
+  IR(CMT0, CMI0)  = 0;
+  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
+  IEN(CMT0, CMI0) = 1;
+  CMT.CMSTR0.BIT.STR0 = 1;
+}
+#endif
diff --git a/examples/host/cdc_msc_hid_freertos/src/hid_app.c b/examples/host/cdc_msc_hid_freertos/src/hid_app.c
new file mode 100644
index 000000000..9ea5c1be0
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/hid_app.c
@@ -0,0 +1,267 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "bsp/board_api.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+
+// If your host terminal support ansi escape code such as TeraTerm
+// it can be use to simulate mouse cursor movement within terminal
+#define USE_ANSI_ESCAPE   0
+
+#define MAX_REPORT  4
+
+static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII };
+
+// Each HID instance can has multiple reports
+static struct {
+  uint8_t report_count;
+  tuh_hid_report_info_t report_info[MAX_REPORT];
+} hid_info[CFG_TUH_HID];
+
+static void process_kbd_report(hid_keyboard_report_t const *report);
+static void process_mouse_report(hid_mouse_report_t const *report);
+static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len);
+
+void hid_app_init(void) {
+  // nothing to do
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device with hid interface is mounted
+// Report descriptor is also available for use. tuh_hid_parse_report_descriptor()
+// can be used to parse common/simple enough descriptor.
+// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped
+// therefore report_desc = NULL, desc_len = 0
+void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *desc_report, uint16_t desc_len) {
+  printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance);
+
+  // Interface protocol (hid_interface_protocol_enum_t)
+  const char *protocol_str[] = { "None", "Keyboard", "Mouse" };
+  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
+
+  printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]);
+
+  // By default host stack will use activate boot protocol on supported interface.
+  // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser)
+  if (itf_protocol == HID_ITF_PROTOCOL_NONE) {
+    hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT,
+                                                                      desc_report, desc_len);
+    printf("HID has %u reports \r\n", hid_info[instance].report_count);
+  }
+
+  // request to receive report
+  // tuh_hid_report_received_cb() will be invoked when report is available
+  if (!tuh_hid_receive_report(dev_addr, instance)) {
+    printf("Error: cannot request to receive report\r\n");
+  }
+}
+
+// Invoked when device with hid interface is un-mounted
+void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) {
+  printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance);
+}
+
+// Invoked when received report from device via interrupt endpoint
+void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) {
+  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
+
+  switch (itf_protocol) {
+    case HID_ITF_PROTOCOL_KEYBOARD:
+      TU_LOG2("HID receive boot keyboard report\r\n");
+      process_kbd_report((hid_keyboard_report_t const *) report);
+      break;
+
+    case HID_ITF_PROTOCOL_MOUSE:
+      TU_LOG2("HID receive boot mouse report\r\n");
+      process_mouse_report((hid_mouse_report_t const *) report);
+      break;
+
+    default:
+      // Generic report requires matching ReportID and contents with previous parsed report info
+      process_generic_report(dev_addr, instance, report, len);
+      break;
+  }
+
+  // continue to request to receive report
+  if (!tuh_hid_receive_report(dev_addr, instance)) {
+    printf("Error: cannot request to receive report\r\n");
+  }
+}
+
+//--------------------------------------------------------------------+
+// Keyboard
+//--------------------------------------------------------------------+
+
+// look up new key in previous keys
+static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) {
+  for (uint8_t i = 0; i < 6; i++) {
+    if (report->keycode[i] == keycode) return true;
+  }
+
+  return false;
+}
+
+static void process_kbd_report(hid_keyboard_report_t const *report) {
+  static hid_keyboard_report_t prev_report = { 0, 0, { 0 } }; // previous report to check key released
+
+  //------------- example code ignore control (non-printable) key affects -------------//
+  for (uint8_t i = 0; i < 6; i++) {
+    if (report->keycode[i]) {
+      if (find_key_in_report(&prev_report, report->keycode[i])) {
+        // exist in previous report means the current key is holding
+      } else {
+        // not existed in previous report means the current key is pressed
+        bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT);
+        uint8_t ch = keycode2ascii[report->keycode[i]][is_shift ? 1 : 0];
+        putchar(ch);
+        if (ch == '\r') putchar('\n'); // added new line for enter key
+
+        #ifndef __ICCARM__ // TODO IAR doesn't support stream control ?
+        fflush(stdout); // flush right away, else nanolib will wait for newline
+        #endif
+      }
+    }
+    // TODO example skips key released
+  }
+
+  prev_report = *report;
+}
+
+//--------------------------------------------------------------------+
+// Mouse
+//--------------------------------------------------------------------+
+
+void cursor_movement(int8_t x, int8_t y, int8_t wheel) {
+#if USE_ANSI_ESCAPE
+  // Move X using ansi escape
+  if ( x < 0) {
+    printf(ANSI_CURSOR_BACKWARD(%d), (-x)); // move left
+  }else if ( x > 0) {
+    printf(ANSI_CURSOR_FORWARD(%d), x); // move right
+  }
+
+  // Move Y using ansi escape
+  if ( y < 0) {
+    printf(ANSI_CURSOR_UP(%d), (-y)); // move up
+  }else if ( y > 0) {
+    printf(ANSI_CURSOR_DOWN(%d), y); // move down
+  }
+
+  // Scroll using ansi escape
+  if (wheel < 0) {
+    printf(ANSI_SCROLL_UP(%d), (-wheel)); // scroll up
+  }else if (wheel > 0) {
+    printf(ANSI_SCROLL_DOWN(%d), wheel); // scroll down
+  }
+
+  printf("\r\n");
+#else
+  printf("(%d %d %d)\r\n", x, y, wheel);
+#endif
+}
+
+static void process_mouse_report(hid_mouse_report_t const *report) {
+  static hid_mouse_report_t prev_report = { 0 };
+
+  //------------- button state  -------------//
+  uint8_t button_changed_mask = report->buttons ^ prev_report.buttons;
+  if (button_changed_mask & report->buttons) {
+    printf(" %c%c%c ",
+           report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-',
+           report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-',
+           report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-');
+  }
+
+  //------------- cursor movement -------------//
+  cursor_movement(report->x, report->y, report->wheel);
+}
+
+//--------------------------------------------------------------------+
+// Generic Report
+//--------------------------------------------------------------------+
+static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) {
+  (void) dev_addr;
+
+  uint8_t const rpt_count = hid_info[instance].report_count;
+  tuh_hid_report_info_t *rpt_info_arr = hid_info[instance].report_info;
+  tuh_hid_report_info_t *rpt_info = NULL;
+
+  if (rpt_count == 1 && rpt_info_arr[0].report_id == 0) {
+    // Simple report without report ID as 1st byte
+    rpt_info = &rpt_info_arr[0];
+  } else {
+    // Composite report, 1st byte is report ID, data starts from 2nd byte
+    uint8_t const rpt_id = report[0];
+
+    // Find report id in the array
+    for (uint8_t i = 0; i < rpt_count; i++) {
+      if (rpt_id == rpt_info_arr[i].report_id) {
+        rpt_info = &rpt_info_arr[i];
+        break;
+      }
+    }
+
+    report++;
+    len--;
+  }
+
+  if (!rpt_info) {
+    printf("Couldn't find report info !\r\n");
+    return;
+  }
+
+  // For complete list of Usage Page & Usage checkout src/class/hid/hid.h. For examples:
+  // - Keyboard                     : Desktop, Keyboard
+  // - Mouse                        : Desktop, Mouse
+  // - Gamepad                      : Desktop, Gamepad
+  // - Consumer Control (Media Key) : Consumer, Consumer Control
+  // - System Control (Power key)   : Desktop, System Control
+  // - Generic (vendor)             : 0xFFxx, xx
+  if (rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP) {
+    switch (rpt_info->usage) {
+      case HID_USAGE_DESKTOP_KEYBOARD:
+        TU_LOG1("HID receive keyboard report\r\n");
+        // Assume keyboard follow boot report layout
+        process_kbd_report((hid_keyboard_report_t const *) report);
+        break;
+
+      case HID_USAGE_DESKTOP_MOUSE:
+        TU_LOG1("HID receive mouse report\r\n");
+        // Assume mouse follow boot report layout
+        process_mouse_report((hid_mouse_report_t const *) report);
+        break;
+
+      default:
+        break;
+    }
+  }
+}
diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c
new file mode 100644
index 000000000..fa799aede
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/main.c
@@ -0,0 +1,180 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board_api.h"
+#include "tusb.h"
+
+#if TUP_MCU_ESPRESSIF
+  // ESP-IDF need "freertos/" prefix in include path.
+  // CFG_TUSB_OS_INC_PATH should be defined accordingly.
+  #include "freertos/FreeRTOS.h"
+  #include "freertos/semphr.h"
+  #include "freertos/queue.h"
+  #include "freertos/task.h"
+  #include "freertos/timers.h"
+
+  #define USBH_STACK_SIZE     4096
+#else
+  #include "FreeRTOS.h"
+  #include "semphr.h"
+  #include "queue.h"
+  #include "task.h"
+  #include "timers.h"
+
+  // Increase stack size when debug log is enabled
+  #define USBH_STACK_SIZE    (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1)
+#endif
+
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTOTYPES
+//--------------------------------------------------------------------+
+/* Blink pattern
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+// static timer & task
+#if configSUPPORT_STATIC_ALLOCATION
+StaticTimer_t blinky_tmdef;
+
+StackType_t  usb_host_stack[USBH_STACK_SIZE];
+StaticTask_t usb_host_taskdef;
+#endif
+
+TimerHandle_t blinky_tm;
+
+static void led_blinky_cb(TimerHandle_t xTimer);
+static void usb_host_task(void* param);
+
+extern void cdc_app_init(void);
+extern void hid_app_init(void);
+extern void msc_app_init(void);
+
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+// API to read/rite MAX3421's register. Implemented by TinyUSB
+extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr);
+extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr);
+#endif
+
+/*------------- MAIN -------------*/
+int main(void) {
+  board_init();
+
+  printf("TinyUSB Host CDC MSC HID with FreeRTOS Example\r\n");
+
+  // Create soft timer for blinky, task for tinyusb stack
+#if configSUPPORT_STATIC_ALLOCATION
+  blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef);
+  xTaskCreateStatic(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_host_stack, &usb_host_taskdef);
+#else
+  blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb);
+  xTaskCreate(usb_host_task, "usbd", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL);
+#endif
+
+  xTimerStart(blinky_tm, 0);
+
+  // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
+#if !TUP_MCU_ESPRESSIF
+  vTaskStartScheduler();
+#endif
+
+  return 0;
+}
+
+#if TUP_MCU_ESPRESSIF
+void app_main(void) {
+  main();
+}
+#endif
+
+// USB Host task
+// This top level thread process all usb events and invoke callbacks
+static void usb_host_task(void *param) {
+  (void) param;
+
+  // init host stack on configured roothub port
+  if (!tuh_init(BOARD_TUH_RHPORT)) {
+    printf("Failed to init USB Host Stack\r\n");
+    vTaskSuspend(NULL);
+  }
+
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+  // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable
+  enum { IOPINS1_ADDR  = 20u << 3, /* 0xA0 */ };
+  tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false);
+#endif
+
+  cdc_app_init();
+  hid_app_init();
+  msc_app_init();
+
+  // RTOS forever loop
+  while (1) {
+    // put this thread to waiting state until there is new events
+    tuh_task();
+
+    // following code only run if tuh_task() process at least 1 event
+  }
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+void tuh_mount_cb(uint8_t dev_addr) {
+  // application set-up
+  printf("A device with address %d is mounted\r\n", dev_addr);
+}
+
+void tuh_umount_cb(uint8_t dev_addr) {
+  // application tear-down
+  printf("A device with address %d is unmounted \r\n", dev_addr);
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+static void led_blinky_cb(TimerHandle_t xTimer) {
+  (void) xTimer;
+  static bool led_state = false;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c
new file mode 100644
index 000000000..9ffd5d965
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c
@@ -0,0 +1,67 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+static scsi_inquiry_resp_t inquiry_resp;
+
+void msc_app_init(void) {
+  // nothing to do
+}
+
+bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_data) {
+  msc_cbw_t const *cbw = cb_data->cbw;
+  msc_csw_t const *csw = cb_data->csw;
+
+  if (csw->status != 0) {
+    printf("Inquiry failed\r\n");
+    return false;
+  }
+
+  // Print out Vendor ID, Product ID and Rev
+  printf("%.8s %.16s rev %.4s\r\n", inquiry_resp.vendor_id, inquiry_resp.product_id, inquiry_resp.product_rev);
+
+  // Get capacity of device
+  uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun);
+  uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun);
+
+  printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024 * 1024) / block_size));
+  printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size);
+
+  return true;
+}
+
+//------------- IMPLEMENTATION -------------//
+void tuh_msc_mount_cb(uint8_t dev_addr) {
+  printf("A MassStorage device is mounted\r\n");
+
+  uint8_t const lun = 0;
+  tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb, 0);
+}
+
+void tuh_msc_umount_cb(uint8_t dev_addr) {
+  (void) dev_addr;
+  printf("A MassStorage device is unmounted\r\n");
+}
diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h
new file mode 100644
index 000000000..0aab2cd2f
--- /dev/null
+++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h
@@ -0,0 +1,140 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_FREERTOS
+#endif
+
+// Espressif IDF requires "freertos/" prefix in include path
+#if TUP_MCU_ESPRESSIF
+#define CFG_TUSB_OS_INC_PATH  freertos/
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUH_MEM_SECTION
+#define CFG_TUH_MEM_SECTION
+#endif
+
+#ifndef CFG_TUH_MEM_ALIGN
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// Driver Configuration
+//--------------------------------------------------------------------
+
+// Size of buffer to hold descriptors and other data used for enumeration
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+
+#define CFG_TUH_HUB                 1 // number of supported hubs
+#define CFG_TUH_CDC                 1 // CDC ACM
+#define CFG_TUH_CDC_FTDI            1 // FTDI Serial.  FTDI is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_CDC_CP210X          1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_CDC_CH34X           1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API
+#define CFG_TUH_HID                 (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces
+#define CFG_TUH_MSC                 1
+#define CFG_TUH_VENDOR              0
+
+// max device support (excluding hub device): 1 hub typically has 4 ports
+#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)
+
+//------------- HID -------------//
+#define CFG_TUH_HID_EPIN_BUFSIZE    64
+#define CFG_TUH_HID_EPOUT_BUFSIZE   64
+
+//------------- CDC -------------//
+
+// Set Line Control state on enumeration/mounted:
+// DTR ( bit 0), RTS (bit 1)
+#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM    0x03
+
+// Set Line Coding on enumeration/mounted, value for cdc_line_coding_t
+// bit rate = 115200, 1 stop bit, no parity, 8 bit data width
+#define CFG_TUH_CDC_LINE_CODING_ON_ENUM   { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }
+
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */
diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt
new file mode 100644
index 000000000..c1b500dd8
--- /dev/null
+++ b/examples/host/hid_controller/CMakeLists.txt
@@ -0,0 +1,33 @@
+cmake_minimum_required(VERSION 3.17)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT} C CXX ASM)
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+  )
+
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} noos)
diff --git a/examples/host/hid_controller/Makefile b/examples/host/hid_controller/Makefile
new file mode 100644
index 000000000..1377f1f90
--- /dev/null
+++ b/examples/host/hid_controller/Makefile
@@ -0,0 +1,14 @@
+include ../../build_system/make/make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += \
+	src/hid_app.c \
+	src/main.c
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../build_system/make/rules.mk
diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt
new file mode 100644
index 000000000..fee10f9e2
--- /dev/null
+++ b/examples/host/hid_controller/only.txt
@@ -0,0 +1,14 @@
+mcu:KINETIS_KL
+mcu:LPC175X_6X
+mcu:LPC177X_8X
+mcu:LPC18XX
+mcu:LPC40XX
+mcu:LPC43XX
+mcu:MIMXRT1XXX
+mcu:MIMXRT10XX
+mcu:MIMXRT11XX
+mcu:RP2040
+mcu:MSP432E4
+mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c
new file mode 100644
index 000000000..bff830ca2
--- /dev/null
+++ b/examples/host/hid_controller/src/hid_app.c
@@ -0,0 +1,324 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "bsp/board_api.h"
+#include "tusb.h"
+
+/* From https://www.kernel.org/doc/html/latest/input/gamepad.html
+          ____________________________              __
+         / [__ZL__]          [__ZR__] \               |
+        / [__ TL __]        [__ TR __] \              | Front Triggers
+     __/________________________________\__         __|
+    /                                  _   \          |
+   /      /\           __             (N)   \         |
+  /       ||      __  |MO|  __     _       _ \        | Main Pad
+ |    <===DP===> |SE|      |ST|   (W) -|- (E) |       |
+  \       ||    ___          ___       _     /        |
+  /\      \/   /   \        /   \     (S)   /\      __|
+ /  \________ | LS  | ____ |  RS | ________/  \       |
+|         /  \ \___/ /    \ \___/ /  \         |      | Control Sticks
+|        /    \_____/      \_____/    \        |    __|
+|       /                              \       |
+ \_____/                                \_____/
+
+     |________|______|    |______|___________|
+       D-Pad    Left       Right   Action Pad
+               Stick       Stick
+
+                 |_____________|
+                    Menu Pad
+
+  Most gamepads have the following features:
+  - Action-Pad 4 buttons in diamonds-shape (on the right side) NORTH, SOUTH, WEST and EAST.
+  - D-Pad (Direction-pad) 4 buttons (on the left side) that point up, down, left and right.
+  - Menu-Pad Different constellations, but most-times 2 buttons: SELECT - START.
+  - Analog-Sticks provide freely moveable sticks to control directions, Analog-sticks may also
+  provide a digital button if you press them.
+  - Triggers are located on the upper-side of the pad in vertical direction. The upper buttons
+  are normally named Left- and Right-Triggers, the lower buttons Z-Left and Z-Right.
+  - Rumble Many devices provide force-feedback features. But are mostly just simple rumble motors.
+ */
+
+// Sony DS4 report layout detail https://www.psdevwiki.com/ps4/DS4-USB
+typedef struct TU_ATTR_PACKED
+{
+  uint8_t x, y, z, rz; // joystick
+
+  struct {
+    uint8_t dpad     : 4; // (hat format, 0x08 is released, 0=N, 1=NE, 2=E, 3=SE, 4=S, 5=SW, 6=W, 7=NW)
+    uint8_t square   : 1; // west
+    uint8_t cross    : 1; // south
+    uint8_t circle   : 1; // east
+    uint8_t triangle : 1; // north
+  };
+
+  struct {
+    uint8_t l1     : 1;
+    uint8_t r1     : 1;
+    uint8_t l2     : 1;
+    uint8_t r2     : 1;
+    uint8_t share  : 1;
+    uint8_t option : 1;
+    uint8_t l3     : 1;
+    uint8_t r3     : 1;
+  };
+
+  struct {
+    uint8_t ps      : 1; // playstation button
+    uint8_t tpad    : 1; // track pad click
+    uint8_t counter : 6; // +1 each report
+  };
+
+  uint8_t l2_trigger; // 0 released, 0xff fully pressed
+  uint8_t r2_trigger; // as above
+
+  //  uint16_t timestamp;
+  //  uint8_t  battery;
+  //
+  //  int16_t gyro[3];  // x, y, z;
+  //  int16_t accel[3]; // x, y, z
+
+  // there is still lots more info
+
+} sony_ds4_report_t;
+
+typedef struct TU_ATTR_PACKED {
+  // First 16 bits set what data is pertinent in this structure (1 = set; 0 = not set)
+  uint8_t set_rumble : 1;
+  uint8_t set_led : 1;
+  uint8_t set_led_blink : 1;
+  uint8_t set_ext_write : 1;
+  uint8_t set_left_volume : 1;
+  uint8_t set_right_volume : 1;
+  uint8_t set_mic_volume : 1;
+  uint8_t set_speaker_volume : 1;
+  uint8_t set_flags2;
+
+  uint8_t reserved;
+
+  uint8_t motor_right;
+  uint8_t motor_left;
+
+  uint8_t lightbar_red;
+  uint8_t lightbar_green;
+  uint8_t lightbar_blue;
+  uint8_t lightbar_blink_on;
+  uint8_t lightbar_blink_off;
+
+  uint8_t ext_data[8];
+
+  uint8_t volume_left;
+  uint8_t volume_right;
+  uint8_t volume_mic;
+  uint8_t volume_speaker;
+
+  uint8_t other[9];
+} sony_ds4_output_report_t;
+
+static bool ds4_mounted = false;
+static uint8_t ds4_dev_addr = 0;
+static uint8_t ds4_instance = 0;
+static uint8_t motor_left = 0;
+static uint8_t motor_right = 0;
+
+// check if device is Sony DualShock 4
+static inline bool is_sony_ds4(uint8_t dev_addr)
+{
+  uint16_t vid, pid;
+  tuh_vid_pid_get(dev_addr, &vid, &pid);
+
+  return ( (vid == 0x054c && (pid == 0x09cc || pid == 0x05c4)) // Sony DualShock4
+           || (vid == 0x0f0d && pid == 0x005e)                 // Hori FC4
+           || (vid == 0x0f0d && pid == 0x00ee)                 // Hori PS4 Mini (PS4-099U)
+           || (vid == 0x1f4f && pid == 0x1002)                 // ASW GG xrd controller
+         );
+}
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+
+void hid_app_task(void)
+{
+  if (ds4_mounted)
+  {
+    const uint32_t interval_ms = 200;
+    static uint32_t start_ms = 0;
+
+    uint32_t current_time_ms = board_millis();
+    if ( current_time_ms - start_ms >= interval_ms)
+    {
+      start_ms = current_time_ms;
+
+      sony_ds4_output_report_t output_report = {0};
+      output_report.set_rumble = 1;
+      output_report.motor_left = motor_left;
+      output_report.motor_right = motor_right;
+      tuh_hid_send_report(ds4_dev_addr, ds4_instance, 5, &output_report, sizeof(output_report));
+    }
+  }
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device with hid interface is mounted
+// Report descriptor is also available for use. tuh_hid_parse_report_descriptor()
+// can be used to parse common/simple enough descriptor.
+// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped
+// therefore report_desc = NULL, desc_len = 0
+void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len)
+{
+  (void)desc_report;
+  (void)desc_len;
+  uint16_t vid, pid;
+  tuh_vid_pid_get(dev_addr, &vid, &pid);
+
+  printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance);
+  printf("VID = %04x, PID = %04x\r\n", vid, pid);
+
+  // Sony DualShock 4 [CUH-ZCT2x]
+  if ( is_sony_ds4(dev_addr) )
+  {
+    if (!ds4_mounted)
+    {
+      ds4_dev_addr = dev_addr;
+      ds4_instance = instance;
+      motor_left = 0;
+      motor_right = 0;
+      ds4_mounted = true;
+    }
+    // request to receive report
+    // tuh_hid_report_received_cb() will be invoked when report is available
+    if ( !tuh_hid_receive_report(dev_addr, instance) )
+    {
+      printf("Error: cannot request to receive report\r\n");
+    }
+  }
+}
+
+// Invoked when device with hid interface is un-mounted
+void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance)
+{
+  printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance);
+  if (ds4_mounted && ds4_dev_addr == dev_addr && ds4_instance == instance)
+  {
+    ds4_mounted = false;
+  }
+}
+
+// check if different than 2
+bool diff_than_2(uint8_t x, uint8_t y)
+{
+  return (x - y > 2) || (y - x > 2);
+}
+
+// check if 2 reports are different enough
+bool diff_report(sony_ds4_report_t const* rpt1, sony_ds4_report_t const* rpt2)
+{
+  bool result;
+
+  // x, y, z, rz must different than 2 to be counted
+  result = diff_than_2(rpt1->x, rpt2->x) || diff_than_2(rpt1->y , rpt2->y ) ||
+           diff_than_2(rpt1->z, rpt2->z) || diff_than_2(rpt1->rz, rpt2->rz);
+
+  // check the rest with mem compare
+  result |= memcmp(&rpt1->rz + 1, &rpt2->rz + 1, sizeof(sony_ds4_report_t)-6);
+
+  return result;
+}
+
+void process_sony_ds4(uint8_t const* report, uint16_t len)
+{
+  const char* dpad_str[] = { "N", "NE", "E", "SE", "S", "SW", "W", "NW", "none" };
+
+  // previous report used to compare for changes
+  static sony_ds4_report_t prev_report = { 0 };
+
+  uint8_t const report_id = report[0];
+  report++;
+  len--;
+
+  // all buttons state is stored in ID 1
+  if (report_id == 1)
+  {
+    sony_ds4_report_t ds4_report;
+    memcpy(&ds4_report, report, sizeof(ds4_report));
+
+    // counter is +1, assign to make it easier to compare 2 report
+    prev_report.counter = ds4_report.counter;
+
+    // only print if changes since it is polled ~ 5ms
+    // Since count+1 after each report and  x, y, z, rz fluctuate within 1 or 2
+    // We need more than memcmp to check if report is different enough
+    if ( diff_report(&prev_report, &ds4_report) )
+    {
+      printf("(x, y, z, rz) = (%u, %u, %u, %u)\r\n", ds4_report.x, ds4_report.y, ds4_report.z, ds4_report.rz);
+      printf("DPad = %s ", dpad_str[ds4_report.dpad]);
+
+      if (ds4_report.square   ) printf("Square ");
+      if (ds4_report.cross    ) printf("Cross ");
+      if (ds4_report.circle   ) printf("Circle ");
+      if (ds4_report.triangle ) printf("Triangle ");
+
+      if (ds4_report.l1       ) printf("L1 ");
+      if (ds4_report.r1       ) printf("R1 ");
+      if (ds4_report.l2       ) printf("L2 ");
+      if (ds4_report.r2       ) printf("R2 ");
+
+      if (ds4_report.share    ) printf("Share ");
+      if (ds4_report.option   ) printf("Option ");
+      if (ds4_report.l3       ) printf("L3 ");
+      if (ds4_report.r3       ) printf("R3 ");
+
+      if (ds4_report.ps       ) printf("PS ");
+      if (ds4_report.tpad     ) printf("TPad ");
+
+      printf("\r\n");
+    }
+
+    // The left and right triggers control the intensity of the left and right rumble motors
+    motor_left = ds4_report.l2_trigger;
+    motor_right = ds4_report.r2_trigger;
+
+    prev_report = ds4_report;
+  }
+}
+
+// Invoked when received report from device via interrupt endpoint
+void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len)
+{
+  if ( is_sony_ds4(dev_addr) )
+  {
+    process_sony_ds4(report, len);
+  }
+
+  // continue to request to receive report
+  if ( !tuh_hid_receive_report(dev_addr, instance) )
+  {
+    printf("Error: cannot request to receive report\r\n");
+  }
+}
diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c
new file mode 100644
index 000000000..05a5ae176
--- /dev/null
+++ b/examples/host/hid_controller/src/main.c
@@ -0,0 +1,97 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* This example current worked and tested with following controller
+ * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc
+ */
+
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board_api.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+void led_blinking_task(void);
+
+extern void cdc_task(void);
+extern void hid_app_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  printf("TinyUSB Host HID Controller Example\r\n");
+  printf("Note: Events only displayed for explicit supported controllers\r\n");
+
+  // init host stack on configured roothub port
+  tuh_init(BOARD_TUH_RHPORT);
+
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
+  while (1)
+  {
+    // tinyusb host task
+    tuh_task();
+    led_blinking_task();
+
+#if CFG_TUH_CDC
+    cdc_task();
+#endif
+
+#if CFG_TUH_HID
+    hid_app_task();
+#endif
+  }
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+//--------------------------------------------------------------------+
+// Blinking Task
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  const uint32_t interval_ms = 1000;
+  static uint32_t start_ms = 0;
+
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h
new file mode 100644
index 000000000..3ac591d8f
--- /dev/null
+++ b/examples/host/hid_controller/src/tusb_config.h
@@ -0,0 +1,121 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUH_MEM_SECTION
+#define CFG_TUH_MEM_SECTION
+#endif
+
+#ifndef CFG_TUH_MEM_ALIGN
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// Driver Configuration
+//--------------------------------------------------------------------
+
+// Size of buffer to hold descriptors and other data used for enumeration
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+
+#define CFG_TUH_HUB                 0
+#define CFG_TUH_CDC                 0
+#define CFG_TUH_HID                 (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces
+#define CFG_TUH_MSC                 0
+#define CFG_TUH_VENDOR              0
+
+// max device support (excluding hub device): 1 hub typically has 4 ports
+#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)
+
+//------------- HID -------------//
+
+#define CFG_TUH_HID_EP_BUFSIZE      64
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */
diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt
new file mode 100644
index 000000000..1a57c7466
--- /dev/null
+++ b/examples/host/msc_file_explorer/CMakeLists.txt
@@ -0,0 +1,47 @@
+cmake_minimum_required(VERSION 3.17)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT} C CXX ASM)
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+# Espressif has its own cmake build system
+if(FAMILY STREQUAL "espressif")
+  return()
+endif()
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+  ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
+  ${TOP}/lib/fatfs/source/ff.c
+  ${TOP}/lib/fatfs/source/ffsystem.c
+  ${TOP}/lib/fatfs/source/ffunicode.c
+  )
+
+# Suppress warnings on fatfs
+if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+  set_source_files_properties(
+    ${TOP}/lib/fatfs/source/ff.c
+    PROPERTIES
+    COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual"
+    )
+endif ()
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+  ${CMAKE_CURRENT_SOURCE_DIR}/src
+  ${TOP}/lib/fatfs/source
+  ${TOP}/lib/embedded-cli
+  )
+
+# Configure compilation flags and libraries for the example without RTOS.
+# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT} noos)
diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile
new file mode 100644
index 000000000..c7d6a7cae
--- /dev/null
+++ b/examples/host/msc_file_explorer/Makefile
@@ -0,0 +1,27 @@
+include ../../build_system/make/make.mk
+
+FATFS_PATH = lib/fatfs/source
+
+INC += \
+	src \
+	$(TOP)/hw \
+	$(TOP)/$(FATFS_PATH) \
+	$(TOP)/lib/embedded-cli \
+
+# Example source
+EXAMPLE_SOURCE = \
+  src/main.c \
+  src/msc_app.c \
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+# FatFS source
+SRC_C += \
+  $(FATFS_PATH)/ff.c \
+  $(FATFS_PATH)/ffsystem.c \
+  $(FATFS_PATH)/ffunicode.c \
+
+# suppress warning caused by fatfs
+CFLAGS += -Wno-error=cast-qual
+
+include ../../build_system/make/rules.mk
diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt
new file mode 100644
index 000000000..fee10f9e2
--- /dev/null
+++ b/examples/host/msc_file_explorer/only.txt
@@ -0,0 +1,14 @@
+mcu:KINETIS_KL
+mcu:LPC175X_6X
+mcu:LPC177X_8X
+mcu:LPC18XX
+mcu:LPC40XX
+mcu:LPC43XX
+mcu:MIMXRT1XXX
+mcu:MIMXRT10XX
+mcu:MIMXRT11XX
+mcu:RP2040
+mcu:MSP432E4
+mcu:RX65X
+mcu:RAXXX
+mcu:MAX3421
diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c
new file mode 100644
index 000000000..f6b6810f5
--- /dev/null
+++ b/examples/host/msc_file_explorer/src/main.c
@@ -0,0 +1,127 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* Example to show how to navigate mass storage device with built-in command line.
+ * Type help for list of supported commands and syntax (mostly linux commands)
+
+ > help
+ * help
+        Print list of commands
+ * cat
+        Usage: cat [FILE]...
+        Concatenate FILE(s) to standard output..
+ * cd
+        Usage: cd [DIR]...
+        Change the current directory to DIR.
+ * cp
+        Usage: cp SOURCE DEST
+        Copy SOURCE to DEST.
+ * ls
+        Usage: ls [DIR]...
+        List information about the FILEs (the current directory by default).
+ * pwd
+        Usage: pwd
+        Print the name of the current working directory.
+ * mkdir
+        Usage: mkdir DIR...
+        Create the DIRECTORY(ies), if they do not already exist..
+ * mv
+        Usage: mv SOURCE DEST...
+        Rename SOURCE to DEST.
+ * rm
+        Usage: rm [FILE]...
+        Remove (unlink) the FILE(s).
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board_api.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+void led_blinking_task(void);
+
+// from msc_app.c
+extern bool msc_app_init(void);
+extern void msc_app_task(void);
+
+/*------------- MAIN -------------*/
+int main(void) {
+  board_init();
+
+  printf("TinyUSB Host MassStorage Explorer Example\r\n");
+
+  // init host stack on configured roothub port
+  tuh_init(BOARD_TUH_RHPORT);
+
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
+  msc_app_init();
+
+  while (1) {
+    // tinyusb host task
+    tuh_task();
+
+    msc_app_task();
+    led_blinking_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// TinyUSB Callbacks
+//--------------------------------------------------------------------+
+
+void tuh_mount_cb(uint8_t dev_addr) {
+  (void) dev_addr;
+}
+
+void tuh_umount_cb(uint8_t dev_addr) {
+  (void) dev_addr;
+}
+
+//--------------------------------------------------------------------+
+// Blinking Task
+//--------------------------------------------------------------------+
+void led_blinking_task(void) {
+  const uint32_t interval_ms = 1000;
+  static uint32_t start_ms = 0;
+
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if (board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c
new file mode 100644
index 000000000..ddd39c674
--- /dev/null
+++ b/examples/host/msc_file_explorer/src/msc_app.c
@@ -0,0 +1,642 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <ctype.h>
+#include "tusb.h"
+#include "bsp/board_api.h"
+
+#include "ff.h"
+#include "diskio.h"
+
+// lib/embedded-cli
+#define EMBEDDED_CLI_IMPL
+#include "embedded_cli.h"
+
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+
+//------------- embedded-cli -------------//
+#define CLI_BUFFER_SIZE     512
+#define CLI_RX_BUFFER_SIZE  16
+#define CLI_CMD_BUFFER_SIZE 64
+#define CLI_HISTORY_SIZE    32
+#define CLI_BINDING_COUNT   8
+
+static EmbeddedCli *_cli;
+static CLI_UINT cli_buffer[BYTES_TO_CLI_UINTS(CLI_BUFFER_SIZE)];
+
+//------------- Elm Chan FatFS -------------//
+static FATFS fatfs[CFG_TUH_DEVICE_MAX]; // for simplicity only support 1 LUN per device
+static volatile bool _disk_busy[CFG_TUH_DEVICE_MAX];
+
+static scsi_inquiry_resp_t inquiry_resp;
+
+//--------------------------------------------------------------------+
+//
+//--------------------------------------------------------------------+
+
+bool cli_init(void);
+
+bool msc_app_init(void)
+{
+  for(size_t i=0; i<CFG_TUH_DEVICE_MAX; i++) _disk_busy[i] = false;
+
+  // disable stdout buffered for echoing typing command
+  #ifndef __ICCARM__ // TODO IAR doesn't support stream control ?
+  setbuf(stdout, NULL);
+  #endif
+
+  cli_init();
+
+  return true;
+}
+
+void msc_app_task(void)
+{
+  if (!_cli) return;
+
+  int ch = board_getchar();
+  if ( ch > 0 )
+  {
+    while( ch > 0 )
+    {
+      embeddedCliReceiveChar(_cli, (char) ch);
+      ch = board_getchar();
+    }
+    embeddedCliProcess(_cli);
+  }
+}
+
+//--------------------------------------------------------------------+
+//
+//--------------------------------------------------------------------+
+
+bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data)
+{
+  msc_cbw_t const* cbw = cb_data->cbw;
+  msc_csw_t const* csw = cb_data->csw;
+
+  if (csw->status != 0)
+  {
+    printf("Inquiry failed\r\n");
+    return false;
+  }
+
+  // Print out Vendor ID, Product ID and Rev
+  printf("%.8s %.16s rev %.4s\r\n", inquiry_resp.vendor_id, inquiry_resp.product_id, inquiry_resp.product_rev);
+
+  // Get capacity of device
+  uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun);
+  uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun);
+
+  printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size));
+  // printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size);
+
+  // For simplicity: we only mount 1 LUN per device
+  uint8_t const drive_num = dev_addr-1;
+  char drive_path[3] = "0:";
+  drive_path[0] += drive_num;
+
+  if ( f_mount(&fatfs[drive_num], drive_path, 1) != FR_OK )
+  {
+    puts("mount failed");
+  }
+
+  // change to newly mounted drive
+  f_chdir(drive_path);
+
+  // print the drive label
+//  char label[34];
+//  if ( FR_OK == f_getlabel(drive_path, label, NULL) )
+//  {
+//    puts(label);
+//  }
+
+  return true;
+}
+
+//------------- IMPLEMENTATION -------------//
+void tuh_msc_mount_cb(uint8_t dev_addr)
+{
+  printf("A MassStorage device is mounted\r\n");
+
+  uint8_t const lun = 0;
+  tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb, 0);
+}
+
+void tuh_msc_umount_cb(uint8_t dev_addr)
+{
+  printf("A MassStorage device is unmounted\r\n");
+
+  uint8_t const drive_num = dev_addr-1;
+  char drive_path[3] = "0:";
+  drive_path[0] += drive_num;
+
+  f_unmount(drive_path);
+
+//  if ( phy_disk == f_get_current_drive() )
+//  { // active drive is unplugged --> change to other drive
+//    for(uint8_t i=0; i<CFG_TUH_DEVICE_MAX; i++)
+//    {
+//      if ( disk_is_ready(i) )
+//      {
+//        f_chdrive(i);
+//        cli_init(); // refractor, rename
+//      }
+//    }
+//  }
+}
+
+//--------------------------------------------------------------------+
+// DiskIO
+//--------------------------------------------------------------------+
+
+static void wait_for_disk_io(BYTE pdrv)
+{
+  while(_disk_busy[pdrv])
+  {
+    tuh_task();
+  }
+}
+
+static bool disk_io_complete(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data)
+{
+  (void) dev_addr; (void) cb_data;
+  _disk_busy[dev_addr-1] = false;
+  return true;
+}
+
+DSTATUS disk_status (
+	BYTE pdrv		/* Physical drive nmuber to identify the drive */
+)
+{
+  uint8_t dev_addr = pdrv + 1;
+  return tuh_msc_mounted(dev_addr) ? 0 : STA_NODISK;
+}
+
+DSTATUS disk_initialize (
+	BYTE pdrv				/* Physical drive nmuber to identify the drive */
+)
+{
+  (void) pdrv;
+	return 0; // nothing to do
+}
+
+DRESULT disk_read (
+	BYTE pdrv,		/* Physical drive nmuber to identify the drive */
+	BYTE *buff,		/* Data buffer to store read data */
+	LBA_t sector,	/* Start sector in LBA */
+	UINT count		/* Number of sectors to read */
+)
+{
+	uint8_t const dev_addr = pdrv + 1;
+	uint8_t const lun = 0;
+
+	_disk_busy[pdrv] = true;
+	tuh_msc_read10(dev_addr, lun, buff, sector, (uint16_t) count, disk_io_complete, 0);
+	wait_for_disk_io(pdrv);
+
+	return RES_OK;
+}
+
+#if FF_FS_READONLY == 0
+
+DRESULT disk_write (
+	BYTE pdrv,			/* Physical drive nmuber to identify the drive */
+	const BYTE *buff,	/* Data to be written */
+	LBA_t sector,		/* Start sector in LBA */
+	UINT count			/* Number of sectors to write */
+)
+{
+	uint8_t const dev_addr = pdrv + 1;
+	uint8_t const lun = 0;
+
+	_disk_busy[pdrv] = true;
+	tuh_msc_write10(dev_addr, lun, buff, sector, (uint16_t) count, disk_io_complete, 0);
+	wait_for_disk_io(pdrv);
+
+	return RES_OK;
+}
+
+#endif
+
+DRESULT disk_ioctl (
+	BYTE pdrv,		/* Physical drive nmuber (0..) */
+	BYTE cmd,		/* Control code */
+	void *buff		/* Buffer to send/receive control data */
+)
+{
+  uint8_t const dev_addr = pdrv + 1;
+  uint8_t const lun = 0;
+  switch ( cmd )
+  {
+    case CTRL_SYNC:
+      // nothing to do since we do blocking
+      return RES_OK;
+
+    case GET_SECTOR_COUNT:
+      *((DWORD*) buff) = (WORD) tuh_msc_get_block_count(dev_addr, lun);
+      return RES_OK;
+
+    case GET_SECTOR_SIZE:
+      *((WORD*) buff) = (WORD) tuh_msc_get_block_size(dev_addr, lun);
+      return RES_OK;
+
+    case GET_BLOCK_SIZE:
+      *((DWORD*) buff) = 1;    // erase block size in units of sector size
+      return RES_OK;
+
+    default:
+      return RES_PARERR;
+  }
+
+	return RES_OK;
+}
+
+//--------------------------------------------------------------------+
+// CLI Commands
+//--------------------------------------------------------------------+
+
+void cli_cmd_cat(EmbeddedCli *cli, char *args, void *context);
+void cli_cmd_cd(EmbeddedCli *cli, char *args, void *context);
+void cli_cmd_cp(EmbeddedCli *cli, char *args, void *context);
+void cli_cmd_ls(EmbeddedCli *cli, char *args, void *context);
+void cli_cmd_pwd(EmbeddedCli *cli, char *args, void *context);
+void cli_cmd_mkdir(EmbeddedCli *cli, char *args, void *context);
+void cli_cmd_mv(EmbeddedCli *cli, char *args, void *context);
+void cli_cmd_rm(EmbeddedCli *cli, char *args, void *context);
+
+void cli_write_char(EmbeddedCli *cli, char c)
+{
+  (void) cli;
+  putchar((int) c);
+}
+
+void cli_cmd_unknown(EmbeddedCli *cli, CliCommand *command)
+{
+  (void) cli;
+  printf("%s: command not found\r\n", command->name);
+}
+
+bool cli_init(void)
+{
+  EmbeddedCliConfig *config = embeddedCliDefaultConfig();
+  config->cliBuffer         = cli_buffer;
+  config->cliBufferSize     = CLI_BUFFER_SIZE;
+  config->rxBufferSize      = CLI_RX_BUFFER_SIZE;
+  config->cmdBufferSize     = CLI_CMD_BUFFER_SIZE;
+  config->historyBufferSize = CLI_HISTORY_SIZE;
+  config->maxBindingCount   = CLI_BINDING_COUNT;
+
+  TU_ASSERT(embeddedCliRequiredSize(config) <= CLI_BUFFER_SIZE);
+
+  _cli = embeddedCliNew(config);
+  TU_ASSERT(_cli != NULL);
+
+  _cli->writeChar = cli_write_char;
+
+  embeddedCliAddBinding(_cli, (CliCommandBinding) {
+    "cat",
+    "Usage: cat [FILE]...\r\n\tConcatenate FILE(s) to standard output..",
+    true,
+    NULL,
+    cli_cmd_cat
+  });
+
+  embeddedCliAddBinding(_cli, (CliCommandBinding) {
+    "cd",
+    "Usage: cd [DIR]...\r\n\tChange the current directory to DIR.",
+    true,
+    NULL,
+    cli_cmd_cd
+  });
+
+  embeddedCliAddBinding(_cli, (CliCommandBinding) {
+    "cp",
+    "Usage: cp SOURCE DEST\r\n\tCopy SOURCE to DEST.",
+    true,
+    NULL,
+    cli_cmd_cp
+  });
+
+  embeddedCliAddBinding(_cli, (CliCommandBinding) {
+    "ls",
+    "Usage: ls [DIR]...\r\n\tList information about the FILEs (the current directory by default).",
+    true,
+    NULL,
+    cli_cmd_ls
+  });
+
+  embeddedCliAddBinding(_cli, (CliCommandBinding) {
+    "pwd",
+    "Usage: pwd\r\n\tPrint the name of the current working directory.",
+    true,
+    NULL,
+    cli_cmd_pwd
+  });
+
+  embeddedCliAddBinding(_cli, (CliCommandBinding) {
+    "mkdir",
+    "Usage: mkdir DIR...\r\n\tCreate the DIRECTORY(ies), if they do not already exist..",
+    true,
+    NULL,
+    cli_cmd_mkdir
+  });
+
+  embeddedCliAddBinding(_cli, (CliCommandBinding) {
+    "mv",
+    "Usage: mv SOURCE DEST...\r\n\tRename SOURCE to DEST.",
+    true,
+    NULL,
+    cli_cmd_mv
+  });
+
+  embeddedCliAddBinding(_cli, (CliCommandBinding) {
+    "rm",
+    "Usage: rm [FILE]...\r\n\tRemove (unlink) the FILE(s).",
+    true,
+    NULL,
+    cli_cmd_rm
+  });
+
+  return true;
+}
+
+void cli_cmd_cat(EmbeddedCli *cli, char *args, void *context)
+{
+  (void) cli; (void) context;
+
+  uint16_t argc = embeddedCliGetTokenCount(args);
+
+  // need at least 1 argument
+  if ( argc == 0 )
+  {
+    printf("invalid arguments\r\n");
+    return;
+  }
+
+  for(uint16_t i=0; i<argc; i++)
+  {
+    FIL fi;
+    const char* fpath = embeddedCliGetToken(args, i+1); // token count from 1
+
+    if ( FR_OK != f_open(&fi, fpath, FA_READ) )
+    {
+      printf("%s: No such file or directory\r\n", fpath);
+    }else
+    {
+      uint8_t buf[512];
+      UINT count = 0;
+      while ( (FR_OK == f_read(&fi, buf, sizeof(buf), &count)) && (count > 0) )
+      {
+        for(UINT c = 0; c < count; c++)
+        {
+          const uint8_t ch = buf[c];
+          if (isprint(ch) || iscntrl(ch))
+          {
+            putchar(ch);
+          }else
+          {
+            putchar('.');
+          }
+        }
+      }
+    }
+
+    f_close(&fi);
+  }
+}
+
+void cli_cmd_cd(EmbeddedCli *cli, char *args, void *context)
+{
+  (void) cli; (void) context;
+
+  uint16_t argc = embeddedCliGetTokenCount(args);
+
+  // only support 1 argument
+  if ( argc != 1 )
+  {
+    printf("invalid arguments\r\n");
+    return;
+  }
+
+  // default is current directory
+  const char* dpath = args;
+
+  if ( FR_OK != f_chdir(dpath) )
+  {
+    printf("%s: No such file or directory\r\n", dpath);
+    return;
+  }
+}
+
+void cli_cmd_cp(EmbeddedCli *cli, char *args, void *context)
+{
+  (void) cli; (void) context;
+
+  uint16_t argc = embeddedCliGetTokenCount(args);
+  if ( argc != 2 )
+  {
+    printf("invalid arguments\r\n");
+    return;
+  }
+
+  // default is current directory
+  const char* src = embeddedCliGetToken(args, 1);
+  const char* dst = embeddedCliGetToken(args, 2);
+
+  FIL f_src;
+  FIL f_dst;
+
+  if ( FR_OK != f_open(&f_src, src, FA_READ) )
+  {
+    printf("cannot stat '%s': No such file or directory\r\n", src);
+    return;
+  }
+
+  if ( FR_OK != f_open(&f_dst, dst, FA_WRITE | FA_CREATE_ALWAYS) )
+  {
+    printf("cannot create '%s'\r\n", dst);
+    return;
+  }else
+  {
+    uint8_t buf[512];
+    UINT rd_count = 0;
+    while ( (FR_OK == f_read(&f_src, buf, sizeof(buf), &rd_count)) && (rd_count > 0) )
+    {
+      UINT wr_count = 0;
+
+      if ( FR_OK != f_write(&f_dst, buf, rd_count, &wr_count) )
+      {
+        printf("cannot write to '%s'\r\n", dst);
+        break;
+      }
+    }
+  }
+
+  f_close(&f_src);
+  f_close(&f_dst);
+}
+
+void cli_cmd_ls(EmbeddedCli *cli, char *args, void *context)
+{
+  (void) cli; (void) context;
+
+  uint16_t argc = embeddedCliGetTokenCount(args);
+
+  // only support 1 argument
+  if ( argc > 1 )
+  {
+    printf("invalid arguments\r\n");
+    return;
+  }
+
+  // default is current directory
+  const char* dpath = ".";
+  if (argc) dpath = args;
+
+  DIR dir;
+  if ( FR_OK != f_opendir(&dir, dpath) )
+  {
+    printf("cannot access '%s': No such file or directory\r\n", dpath);
+    return;
+  }
+
+  FILINFO fno;
+  while( (f_readdir(&dir, &fno) == FR_OK) && (fno.fname[0] != 0) )
+  {
+    if ( fno.fname[0] != '.' ) // ignore . and .. entry
+    {
+      if ( fno.fattrib & AM_DIR )
+      {
+        // directory
+        printf("/%s\r\n", fno.fname);
+      }else
+      {
+        printf("%-40s", fno.fname);
+        if (fno.fsize < 1024)
+        {
+          printf("%" PRIu32 " B\r\n", fno.fsize);
+        }else
+        {
+          printf("%" PRIu32 " KB\r\n", fno.fsize / 1024);
+        }
+      }
+    }
+  }
+
+  f_closedir(&dir);
+}
+
+void cli_cmd_pwd(EmbeddedCli *cli, char *args, void *context)
+{
+  (void) cli; (void) context;
+  uint16_t argc = embeddedCliGetTokenCount(args);
+
+  if (argc != 0)
+  {
+    printf("invalid arguments\r\n");
+    return;
+  }
+
+  char path[256];
+  if (FR_OK != f_getcwd(path, sizeof(path)))
+  {
+    printf("cannot get current working directory\r\n");
+  }
+
+  puts(path);
+}
+
+void cli_cmd_mkdir(EmbeddedCli *cli, char *args, void *context)
+{
+  (void) cli; (void) context;
+
+  uint16_t argc = embeddedCliGetTokenCount(args);
+
+  // only support 1 argument
+  if ( argc != 1 )
+  {
+    printf("invalid arguments\r\n");
+    return;
+  }
+
+  // default is current directory
+  const char* dpath = args;
+
+  if ( FR_OK != f_mkdir(dpath) )
+  {
+    printf("%s: cannot create this directory\r\n", dpath);
+    return;
+  }
+}
+
+void cli_cmd_mv(EmbeddedCli *cli, char *args, void *context)
+{
+  (void) cli; (void) context;
+
+  uint16_t argc = embeddedCliGetTokenCount(args);
+  if ( argc != 2 )
+  {
+    printf("invalid arguments\r\n");
+    return;
+  }
+
+  // default is current directory
+  const char* src = embeddedCliGetToken(args, 1);
+  const char* dst = embeddedCliGetToken(args, 2);
+
+  if ( FR_OK != f_rename(src, dst) )
+  {
+    printf("cannot mv %s to %s\r\n", src, dst);
+    return;
+  }
+}
+
+void cli_cmd_rm(EmbeddedCli *cli, char *args, void *context)
+{
+  (void) cli; (void) context;
+
+  uint16_t argc = embeddedCliGetTokenCount(args);
+
+  // need at least 1 argument
+  if ( argc == 0 )
+  {
+    printf("invalid arguments\r\n");
+    return;
+  }
+
+  for(uint16_t i=0; i<argc; i++)
+  {
+    const char* fpath = embeddedCliGetToken(args, i+1); // token count from 1
+
+    if ( FR_OK != f_unlink(fpath) )
+    {
+      printf("cannot remove '%s': No such file or directory\r\n", fpath);
+    }
+  }
+}
diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h
new file mode 100644
index 000000000..c798b4383
--- /dev/null
+++ b/examples/host/msc_file_explorer/src/tusb_config.h
@@ -0,0 +1,120 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUH_MEM_SECTION
+#define CFG_TUH_MEM_SECTION
+#endif
+
+#ifndef CFG_TUH_MEM_ALIGN
+#define CFG_TUH_MEM_ALIGN     __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// Host Configuration
+//--------------------------------------------------------------------
+
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
+
+  // host roothub port is 1 if using either pio-usb or max3421
+  #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
+    #define BOARD_TUH_RHPORT      1
+  #endif
+#endif
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+//------------------------- Board Specific --------------------------
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+//--------------------------------------------------------------------
+// Driver Configuration
+//--------------------------------------------------------------------
+
+// Size of buffer to hold descriptors and other data used for enumeration
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+
+#define CFG_TUH_HUB                 1 // number of supported hubs
+#define CFG_TUH_MSC                 1
+#define CFG_TUH_CDC                 0
+#define CFG_TUH_HID                 0 // typical keyboard + mouse device can have 3-4 HID interfaces
+#define CFG_TUH_VENDOR              0
+
+// max device support (excluding hub device): 1 hub typically has 4 ports
+#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)
+
+//------------- MSC -------------//
+#define CFG_TUH_MSC_MAXLUN    4 // typical for most card reader
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */