update example to work with featherwing max3421, set max3421 GPIO0 for vbus

tested with feather nrf52840, m0, m4

2 files changed, 30 insertions, 12 deletions

diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c
index 405bf8c06..a3b80e030 100644
--- a/examples/host/cdc_msc_hid/src/main.c
+++ b/examples/host/cdc_msc_hid/src/main.c
@@ -34,13 +34,17 @@
 // MACRO CONSTANT TYPEDEF PROTYPES
 //--------------------------------------------------------------------+
 void led_blinking_task(void);
-
 extern void cdc_app_task(void);
 extern void hid_app_task(void);
 
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+// API to read/rite MAX3421's register. Implemented by TinyUSB
+extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr);
+extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr);
+#endif
+
 /*------------- MAIN -------------*/
-int main(void)
-{
+int main(void) {
   board_init();
 
   printf("TinyUSB Host CDC MSC HID Example\r\n");
@@ -52,8 +56,13 @@ int main(void)
     board_init_after_tusb();
   }
 
-  while (1)
-  {
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+  // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable
+  enum { IOPINS1_ADDR  = 20u << 3, /* 0xA0 */ };
+  tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false);
+#endif
+
+  while (1) {
     // tinyusb host task
     tuh_task();
 
@@ -67,14 +76,12 @@ int main(void)
 // TinyUSB Callbacks
 //--------------------------------------------------------------------+
 
-void tuh_mount_cb(uint8_t dev_addr)
-{
+void tuh_mount_cb(uint8_t dev_addr) {
   // application set-up
   printf("A device with address %d is mounted\r\n", dev_addr);
 }
 
-void tuh_umount_cb(uint8_t dev_addr)
-{
+void tuh_umount_cb(uint8_t dev_addr) {
   // application tear-down
   printf("A device with address %d is unmounted \r\n", dev_addr);
 }
@@ -83,15 +90,14 @@ void tuh_umount_cb(uint8_t dev_addr)
 //--------------------------------------------------------------------+
 // Blinking Task
 //--------------------------------------------------------------------+
-void led_blinking_task(void)
-{
+void led_blinking_task(void) {
   const uint32_t interval_ms = 1000;
   static uint32_t start_ms = 0;
 
   static bool led_state = false;
 
   // Blink every interval ms
-  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  if (board_millis() - start_ms < interval_ms) return; // not enough time
   start_ms += interval_ms;
 
   board_led_write(led_state);
diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c
index 691ff3e29..069cbdc90 100644
--- a/examples/host/cdc_msc_hid_freertos/src/main.c
+++ b/examples/host/cdc_msc_hid_freertos/src/main.c
@@ -83,6 +83,12 @@ extern void cdc_app_init(void);
 extern void hid_app_init(void);
 extern void msc_app_init(void);
 
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+// API to read/rite MAX3421's register. Implemented by TinyUSB
+extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr);
+extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr);
+#endif
+
 /*------------- MAIN -------------*/
 int main(void) {
   board_init();
@@ -126,6 +132,12 @@ static void usb_host_task(void *param) {
     board_init_after_tusb();
   }
 
+#if CFG_TUH_ENABLED && CFG_TUH_MAX3421
+  // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable
+  enum { IOPINS1_ADDR  = 20u << 3, /* 0xA0 */ };
+  tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false);
+#endif
+
   cdc_app_init();
   hid_app_init();
   msc_app_init();