move make.mk and rules.mk to build_system/make

1 files changed, 0 insertions, 173 deletions

diff --git a/examples/rules.mk b/examples/rules.mk
deleted file mode 100644
index b02665cdd..000000000
--- a/examples/rules.mk
+++ /dev/null
@@ -1,173 +0,0 @@
-# ---------------------------------------
-# Common make rules for all examples
-# ---------------------------------------
-
-# Set all as default goal
-.DEFAULT_GOAL := all
-
-# ---------------- GNU Make Start -----------------------
-# ESP32-Sx and RP2040 has its own CMake build system
-ifeq (,$(findstring $(FAMILY),espressif rp2040))
-
-# ---------------------------------------
-# Compiler Flags
-# ---------------------------------------
-
-CFLAGS += $(addprefix -I,$(INC))
-
-# Verbose mode
-ifeq ("$(V)","1")
-$(info CFLAGS  $(CFLAGS) ) $(info )
-$(info LDFLAGS $(LDFLAGS)) $(info )
-$(info ASFLAGS $(ASFLAGS)) $(info )
-endif
-
-# ---------------------------------------
-# Rules
-# ---------------------------------------
-
-all: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex size
-
-uf2: $(BUILD)/$(PROJECT).uf2
-
-# We set vpath to point to the top of the tree so that the source files
-# can be located. By following this scheme, it allows a single build rule
-# to be used to compile all .c files.
-vpath %.c . $(TOP)
-vpath %.s . $(TOP)
-vpath %.S . $(TOP)
-
-include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN)_rules.mk
-
-
-OBJ_DIRS = $(sort $(dir $(OBJ)))
-$(OBJ): | $(OBJ_DIRS)
-$(OBJ_DIRS):
-ifeq ($(CMDEXE),1)
-	-@$(MKDIR) $(subst /,\,$@)
-else
-	@$(MKDIR) -p $@
-endif
-
-# UF2 generation, iMXRT need to strip to text only before conversion
-ifneq ($(FAMILY),imxrt)
-$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).hex
-	@echo CREATE $@
-	$(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -c -o $@ $^
-endif
-
-copy-artifact: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex $(BUILD)/$(PROJECT).uf2
-
-endif
-# ---------------- GNU Make End -----------------------
-
-.PHONY: clean
-clean:
-ifeq ($(CMDEXE),1)
-	rd /S /Q $(subst /,\,$(BUILD))
-else
-	$(RM) -rf $(BUILD)
-endif
-
-# get depenecies
-.PHONY: get-deps
-get-deps:
-	$(PYTHON) $(TOP)/tools/get_deps.py ${FAMILY}
-
-.PHONY: size
-size: $(BUILD)/$(PROJECT).elf
-	-@echo ''
-	@$(SIZE) $<
-	-@echo ''
-
-# linkermap must be install previously at https://github.com/hathach/linkermap
-linkermap: $(BUILD)/$(PROJECT).elf
-	@linkermap -v $<.map
-
-# ---------------------------------------
-# Flash Targets
-# ---------------------------------------
-
-# --------------- Jlink -----------------
-ifeq ($(OS),Windows_NT)
-  JLINKEXE = JLink.exe
-else
-  JLINKEXE = JLinkExe
-endif
-
-# Jlink Interface
-JLINK_IF ?= swd
-
-# Jlink script
-$(BUILD)/$(BOARD).jlink: $(BUILD)/$(PROJECT).hex
-	@echo halt > $@
-	@echo loadfile $^ >> $@
-	@echo r >> $@
-	@echo go >> $@
-	@echo exit >> $@
-
-# Flash using jlink
-flash-jlink: $(BUILD)/$(BOARD).jlink
-	$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $<
-
-# --------------- stm32 cube programmer -----------------
-# Flash STM32 MCU using stlink with STM32 Cube Programmer CLI
-flash-stlink: $(BUILD)/$(PROJECT).elf
-	STM32_Programmer_CLI --connect port=swd --write $< --go
-
-# --------------- xfel -----------------
-$(BUILD)/$(PROJECT)-sunxi.bin: $(BUILD)/$(PROJECT).bin
-	$(PYTHON) $(TOP)/tools/mksunxi.py $< $@
-
-flash-xfel: $(BUILD)/$(PROJECT)-sunxi.bin
-	xfel spinor write 0 $<
-	xfel reset
-
-# --------------- pyocd -----------------
-PYOCD_OPTION ?=
-flash-pyocd: $(BUILD)/$(PROJECT).hex
-	pyocd flash -t $(PYOCD_TARGET) $(PYOCD_OPTION) $<
-	#pyocd reset -t $(PYOCD_TARGET)
-
-# --------------- openocd -----------------
-OPENOCD_OPTION ?=
-flash-openocd: $(BUILD)/$(PROJECT).elf
-	openocd $(OPENOCD_OPTION) -c "program $< verify reset exit"
-
-# --------------- dfu-util -----------------
-DFU_UTIL_OPTION ?= -a 0
-flash-dfu-util: $(BUILD)/$(PROJECT).bin
-	dfu-util -R $(DFU_UTIL_OPTION) -D $<
-
-# --------------- Black Magic -----------------
-# This symlink is created by https://github.com/blacksphere/blackmagic/blob/master/driver/99-blackmagic.rules
-BMP ?= /dev/ttyBmpGdb
-
-flash-bmp: $(BUILD)/$(PROJECT).elf
-	$(GDB) --batch -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' -ex load  $<
-
-debug-bmp: $(BUILD)/$(PROJECT).elf
-	$(GDB) -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' $<
-
-#-------------- Artifacts --------------
-
-# Create binary directory
-$(BIN):
-ifeq ($(CMDEXE),1)
-	@$(MKDIR) $(subst /,\,$@)
-else
-	@$(MKDIR) -p $@
-endif
-
-# Copy binaries .elf, .bin, .hex, .uf2 to BIN for upload
-# due to large size of combined artifacts, only uf2 is uploaded for now
-copy-artifact: $(BIN)
-	@$(CP) $(BUILD)/$(PROJECT).uf2 $(BIN)
-	#@$(CP) $(BUILD)/$(PROJECT).bin $(BIN)
-	#@$(CP) $(BUILD)/$(PROJECT).hex $(BIN)
-	#@$(CP) $(BUILD)/$(PROJECT).elf $(BIN)
-
-# Print out the value of a make variable.
-# https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile
-print-%:
-	@echo $* = $($*)