add high speed into examples\device\video_capture

1 files changed, 80 insertions, 2 deletions

diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c
index 292d86cd9..49919fc58 100644
--- a/examples/device/video_capture/src/usb_descriptors.c
+++ b/examples/device/video_capture/src/usb_descriptors.c
@@ -37,6 +37,9 @@
 #define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
     _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VIDEO, 5) | _PID_MAP(VENDOR, 6) )
 
+#define USB_VID   0xCafe
+#define USB_BCD   0x0200
+
 //--------------------------------------------------------------------+
 // Device Descriptors
 //--------------------------------------------------------------------+
@@ -44,7 +47,7 @@ tusb_desc_device_t const desc_device =
 {
     .bLength            = sizeof(tusb_desc_device_t),
     .bDescriptorType    = TUSB_DESC_DEVICE,
-    .bcdUSB             = 0x0200,
+    .bcdUSB             = USB_BCD,
 
     // Use Interface Association Descriptor (IAD) for Video
     // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
@@ -54,7 +57,7 @@ tusb_desc_device_t const desc_device =
 
     .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
 
-    .idVendor           = 0xCafe,
+    .idVendor           = USB_VID,
     .idProduct          = USB_PID,
     .bcdDevice          = 0x0100,
 
@@ -137,6 +140,76 @@ uint8_t const desc_fs_configuration[] =
 #endif
 };
 
+#if TUD_OPT_HIGH_SPEED
+// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration
+
+uint8_t const desc_hs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0, 500),
+
+  // IAD for Video Control
+#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG)
+# if 1 == CFG_TUD_VIDEO_STREAMING_BULK
+  TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPEG_BULK(4, EPNUM_VIDEO_IN,
+                                          FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE,
+                                          512)
+# else
+  TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPEG(4, EPNUM_VIDEO_IN,
+                                     FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE,
+                                     CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE)
+# endif
+#else
+# if 1 == CFG_TUD_VIDEO_STREAMING_BULK
+  TUD_VIDEO_CAPTURE_DESCRIPTOR_UNCOMPR_BULK(4, EPNUM_VIDEO_IN,
+                                            FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE,
+                                            512)
+# else
+  TUD_VIDEO_CAPTURE_DESCRIPTOR_UNCOMPR(4, EPNUM_VIDEO_IN,
+                                       FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE,
+                                       CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE)
+# endif
+#endif
+};
+
+// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
+tusb_desc_device_qualifier_t const desc_device_qualifier =
+{
+  .bLength            = sizeof(tusb_desc_device_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE,
+  .bcdUSB             = USB_BCD,
+
+  .bDeviceClass       = TUSB_CLASS_MISC,
+  .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+  .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+  .bNumConfigurations = 0x01,
+  .bReserved          = 0x00
+};
+
+// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
+// device_qualifier descriptor describes information about a high-speed capable device that would
+// change if the device were operating at the other speed. If not highspeed capable stall this request.
+uint8_t const* tud_descriptor_device_qualifier_cb(void)
+{
+  return (uint8_t const*) &desc_device_qualifier;
+}
+
+// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
+uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+
+  // if link speed is high return fullspeed config, and vice versa
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_fs_configuration : desc_hs_configuration;
+}
+
+#endif // highspeed
+
 // Invoked when received GET CONFIGURATION DESCRIPTOR
 // Application return pointer to descriptor
 // Descriptor contents must exist long enough for transfer to complete
@@ -144,7 +217,12 @@ uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
 {
   (void) index; // for multiple configurations
 
+#if TUD_OPT_HIGH_SPEED
+  // Although we are highspeed, host may be fullspeed.
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
+#else
   return desc_fs_configuration;
+#endif
 }
 
 //--------------------------------------------------------------------+