Merge pull request #1183 from kkitayam/add_msp_exp432e401y

Add support for TI MSP-EXP432E401Y

4 files changed, 21 insertions, 5 deletions

diff --git a/examples/device/99-tinyusb.rules b/examples/device/99-tinyusb.rules
index e6372ed58..d306bada5 100644
--- a/examples/device/99-tinyusb.rules
+++ b/examples/device/99-tinyusb.rules
@@ -12,3 +12,10 @@ ATTRS{idVendor}=="cafe", MODE="0666", GROUP="dialout"
 
 # Rule to blacklist TinyUSB example from being manipulated by ModemManager.
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="cafe", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+# Xplained Pro SamG55 Device
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2111", MODE="0666", GROUP="users", ENV{ID_MM_DEVICE_IGNORE}="1"
+SUBSYSTEMS=="tty", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2111", MODE="0666", GROUP="users", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+# TI Stellaris/Tiva-C Launchpad ICDI
+SUBSYSTEM=="usb", ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666"
diff --git a/examples/device/dfu/.skip.MCU_TM4C123 b/examples/device/dfu/.skip.MCU_TM4C123
new file mode 100644
index 000000000..6260e6e25
--- /dev/null
+++ b/examples/device/dfu/.skip.MCU_TM4C123
@@ -0,0 +1,4 @@
+LINK _build/ek-tm4c123gxl/dfu.elf
+/home/runner/cache/toolchain/xpack-arm-none-eabi-gcc-10.2.1-1.1/bin/../lib/gcc/arm-none-eabi/10.2.1/../../../../arm-none-eabi/bin/ld: section .ARM.exidx.text._close LMA [0000000000002980,0000000000002987] overlaps section .data LMA [0000000000002980,0000000000002a03]
+collect2: error: ld returned 1 exit status
+make: *** [../../rules.mk:94: _build/ek-tm4c123gxl/dfu.elf] Error 1
\ No newline at end of file
diff --git a/examples/device/dfu/src/tusb_config.h b/examples/device/dfu/src/tusb_config.h
index 66e357021..012d50019 100644
--- a/examples/device/dfu/src/tusb_config.h
+++ b/examples/device/dfu/src/tusb_config.h
@@ -80,7 +80,7 @@
 #define CFG_TUD_DFU    1
 
 // DFU buffer size, it has to be set to the buffer size used in TUD_DFU_DESCRIPTOR
-#define CFG_TUD_DFU_XFER_BUFSIZE    512
+#define CFG_TUD_DFU_XFER_BUFSIZE    ( OPT_MODE_HIGH_SPEED ? 512 : 64 )
 
 #ifdef __cplusplus
  }
diff --git a/examples/rules.mk b/examples/rules.mk
index 92fa4e14d..4cc35cb22 100644
--- a/examples/rules.mk
+++ b/examples/rules.mk
@@ -158,13 +158,14 @@ endif
 # Flash Targets
 # ---------------------------------------
 
-# Flash binary using Jlink
+# Jlink binary
 ifeq ($(OS),Windows_NT)
   JLINKEXE = JLink.exe
 else
   JLINKEXE = JLinkExe
 endif
 
+# Jlink Interface
 JLINK_IF ?= swd
 
 # Flash using jlink
@@ -177,18 +178,22 @@ flash-jlink: $(BUILD)/$(PROJECT).hex
 	@echo exit >> $(BUILD)/$(BOARD).jlink
 	$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink
 
-# flash STM32 MCU using stlink with STM32 Cube Programmer CLI
+# Flash STM32 MCU using stlink with STM32 Cube Programmer CLI
 flash-stlink: $(BUILD)/$(PROJECT).elf
 	STM32_Programmer_CLI --connect port=swd --write $< --go
 
-# flash with pyocd
+# Flash using pyocd
 PYOCD_OPTION ?=
 flash-pyocd: $(BUILD)/$(PROJECT).hex
 	pyocd flash -t $(PYOCD_TARGET) $(PYOCD_OPTION) $<
 	pyocd reset -t $(PYOCD_TARGET)
 
-# flash with Black Magic Probe
+# Flash using openocd
+OPENOCD_OPTION ?=
+flash-openocd: $(BUILD)/$(PROJECT).elf
+	openocd $(OPENOCD_OPTION) -c "program $< verify reset exit"
 
+# flash with Black Magic Probe
 # This symlink is created by https://github.com/blacksphere/blackmagic/blob/master/driver/99-blackmagic.rules
 BMP ?= /dev/ttyBmpGdb