Merge branch 'master' into rp2040-hcd-bulk

100 files changed, 1448 insertions, 854 deletions

diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c
index d085dd43a..a6af5fd19 100644
--- a/examples/device/audio_4_channel_mic/src/main.c
+++ b/examples/device/audio_4_channel_mic/src/main.c
@@ -81,7 +81,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   // Init values
   sampFreq = AUDIO_SAMPLE_RATE;
@@ -220,7 +221,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *
         // Request uses format layout 2
         TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t));
 
-        volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur;
+        volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur;
 
         TU_LOG2("    Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum);
       return true;
diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h
index 023faa7e2..5cf6d07c3 100644
--- a/examples/device/audio_4_channel_mic/src/tusb_config.h
+++ b/examples/device/audio_4_channel_mic/src/tusb_config.h
@@ -30,6 +30,20 @@
 extern "C" {
 #endif
 
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
 //--------------------------------------------------------------------
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
@@ -39,18 +53,19 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
+#define CFG_TUSB_OS               OPT_OS_NONE
 #endif
 
 #ifndef CFG_TUSB_DEBUG
-#define CFG_TUSB_DEBUG              0
+#define CFG_TUSB_DEBUG            0
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+// Enable Device stack
+#define CFG_TUD_ENABLED           1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED         BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -64,7 +79,7 @@ extern "C" {
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
@@ -76,11 +91,11 @@ extern "C" {
 #endif
 
 //------------- CLASS -------------//
+#define CFG_TUD_AUDIO             1
 #define CFG_TUD_CDC               0
 #define CFG_TUD_MSC               0
 #define CFG_TUD_HID               0
 #define CFG_TUD_MIDI              0
-#define CFG_TUD_AUDIO             1
 #define CFG_TUD_VENDOR            0
 
 //--------------------------------------------------------------------
@@ -89,23 +104,23 @@ extern "C" {
 
 // Have a look into audio_device.h for all configurations
 
-#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                                 TUD_AUDIO_MIC_FOUR_CH_DESC_LEN
+#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                 TUD_AUDIO_MIC_FOUR_CH_DESC_LEN
 
-#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT                                 1
-#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ                              64
+#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT                 1
+#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ              64
 
-#define CFG_TUD_AUDIO_ENABLE_EP_IN                                    1
-#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX                    2         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
-#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX                            4         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
-#define CFG_TUD_AUDIO_EP_SZ_IN                                        (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX      // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX                             CFG_TUD_AUDIO_EP_SZ_IN
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ                          CFG_TUD_AUDIO_EP_SZ_IN
+#define CFG_TUD_AUDIO_ENABLE_EP_IN                    1
+#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX    2         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
+#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX            4         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
+#define CFG_TUD_AUDIO_EP_SZ_IN                        (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX      // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error
+#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
+#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          CFG_TUD_AUDIO_EP_SZ_IN
 
-#define CFG_TUD_AUDIO_ENABLE_ENCODING                                 1
-#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING                          1
-#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX                      2         // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
-#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO                        (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
-#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ                       (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO)
+#define CFG_TUD_AUDIO_ENABLE_ENCODING                 1
+#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING          1
+#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX      2         // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
+#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO        (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
+#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ       (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO)
 
 #ifdef __cplusplus
 }
diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c
index 93ae2ea47..8929f3057 100644
--- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c
+++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c
@@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     for(uint8_t i=0; i<chr_count; i++)
@@ -159,7 +159,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c
index ed13ce993..d0849c7ac 100644
--- a/examples/device/audio_test/src/main.c
+++ b/examples/device/audio_test/src/main.c
@@ -82,7 +82,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   // Init values
   sampFreq = AUDIO_SAMPLE_RATE;
@@ -221,7 +222,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *
         // Request uses format layout 2
         TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t));
 
-        volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur;
+        volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur;
 
         TU_LOG2("    Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum);
       return true;
diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h
index 9b8514265..355ed1011 100644
--- a/examples/device/audio_test/src/tusb_config.h
+++ b/examples/device/audio_test/src/tusb_config.h
@@ -30,6 +30,20 @@
 extern "C" {
 #endif
 
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
 //--------------------------------------------------------------------
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
@@ -39,8 +53,6 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-
 #ifndef CFG_TUSB_OS
 #define CFG_TUSB_OS                 OPT_OS_NONE
 #endif
@@ -49,6 +61,12 @@ extern "C" {
 #define CFG_TUSB_DEBUG              0
 #endif
 
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0
 
@@ -76,11 +94,11 @@ extern "C" {
 #endif
 
 //------------- CLASS -------------//
+#define CFG_TUD_AUDIO             1
 #define CFG_TUD_CDC               0
 #define CFG_TUD_MSC               0
 #define CFG_TUD_HID               0
 #define CFG_TUD_MIDI              0
-#define CFG_TUD_AUDIO             1
 #define CFG_TUD_VENDOR            0
 
 //--------------------------------------------------------------------
diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c
index 09b2a2d45..da3e203d7 100644
--- a/examples/device/audio_test/src/usb_descriptors.c
+++ b/examples/device/audio_test/src/usb_descriptors.c
@@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     for(uint8_t i=0; i<chr_count; i++)
@@ -159,7 +159,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h
index da33729e7..5aea4fd2c 100644
--- a/examples/device/board_test/src/tusb_config.h
+++ b/examples/device/board_test/src/tusb_config.h
@@ -43,7 +43,9 @@
   #define CFG_TUSB_OS               OPT_OS_NONE
 #endif
 
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_NONE
+// This example only test LED & GPIO, disable both device and host stack
+#define CFG_TUD_ENABLED   0
+#define CFG_TUH_ENABLED   0
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0
@@ -63,21 +65,6 @@
 #define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
 #endif
 
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE   64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_CDC             0
-#define CFG_TUD_MSC             0
-#define CFG_TUD_HID             0
-#define CFG_TUD_MIDI            0
-#define CFG_TUD_VENDOR          0
-
 #ifdef __cplusplus
  }
 #endif
diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c
index 34cd29edd..0264f0566 100644
--- a/examples/device/cdc_dual_ports/src/main.c
+++ b/examples/device/cdc_dual_ports/src/main.c
@@ -39,7 +39,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
@@ -54,17 +55,19 @@ int main(void)
 // with Serial0 as all lower case, Serial1 as all upper case
 static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count)
 {
+  uint8_t const case_diff = 'a' - 'A';
+
   for(uint32_t i=0; i<count; i++)
   {
     if (itf == 0)
     {
       // echo back 1st port as lower case
-      if (isupper(buf[i])) buf[i] += 'a' - 'A';
+      if (isupper(buf[i])) buf[i] += case_diff;
     }
     else
     {
       // echo back 2nd port as upper case
-      if (islower(buf[i])) buf[i] -= 'a' - 'A';
+      if (islower(buf[i])) buf[i] -= case_diff;
     }
 
     tud_cdc_n_write_char(itf, buf[i]);
diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h
index f93606092..070f08ed1 100644
--- a/examples/device/cdc_dual_ports/src/tusb_config.h
+++ b/examples/device/cdc_dual_ports/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
 //--------------------------------------------------------------------
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
 // defined by board.mk
 #ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
+#error CFG_TUSB_MCU must be defined
 #endif
 
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
 #endif
 
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
-#endif
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c
index aa400d486..cda1b63b6 100644
--- a/examples/device/cdc_dual_ports/src/usb_descriptors.c
+++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c
@@ -236,7 +236,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -247,7 +247,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c
index 131ae6549..c3666763b 100644
--- a/examples/device/cdc_msc/src/main.c
+++ b/examples/device/cdc_msc/src/main.c
@@ -54,7 +54,9 @@ void cdc_task(void);
 int main(void)
 {
   board_init();
-  tusb_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h
index 6507cef19..03e0e649c 100644
--- a/examples/device/cdc_msc/src/tusb_config.h
+++ b/examples/device/cdc_msc/src/tusb_config.h
@@ -30,42 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
-// This example doesn't use an RTOS
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -79,7 +79,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN    __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c
index 09894cf1b..6b59ed50f 100644
--- a/examples/device/cdc_msc/src/usb_descriptors.c
+++ b/examples/device/cdc_msc/src/usb_descriptors.c
@@ -282,7 +282,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/cdc_msc_freertos/.skip.MCU_F1C100S b/examples/device/cdc_msc_freertos/.skip.MCU_F1C100S
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/device/cdc_msc_freertos/.skip.MCU_F1C100S
+++ /dev/null
diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile
index a155d6cb7..3352dd37d 100644
--- a/examples/device/cdc_msc_freertos/Makefile
+++ b/examples/device/cdc_msc_freertos/Makefile
@@ -30,7 +30,7 @@ SRC_C += \
 	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c))
 
 # Suppress FreeRTOS warnings
-CFLAGS += -Wno-error=cast-qual
+CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls
 
 # FreeRTOS (lto + Os) linker issue
 LDFLAGS += -Wl,--undefined=vTaskSwitchContext
diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt
index 7137b78af..1ee51a9d4 100644
--- a/examples/device/cdc_msc_freertos/skip.txt
+++ b/examples/device/cdc_msc_freertos/skip.txt
@@ -1,10 +1,11 @@
 mcu:CXD56
-mcu:MSP430x5xx
-mcu:SAMD11
-mcu:VALENTYUSB_EPTRI
+mcu:F1C100S
+mcu:GD32VF103
 mcu:MKL25ZXX
+mcu:MSP430x5xx
 mcu:RP2040
+mcu:SAMD11
 mcu:SAMX7X
-mcu:GD32VF103
-family:broadcom_64bit
-family:broadcom_32bit
\ No newline at end of file
+mcu:VALENTYUSB_EPTRI
+family:broadcom_32bit
+family:broadcom_64bit
\ No newline at end of file
diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
index ccb620720..6a3630dbc 100644
--- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
+++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
@@ -53,6 +53,7 @@
 #if CFG_TUSB_MCU == OPT_MCU_MM32F327X
   extern u32 SystemCoreClock;
 #else
+  // FIXME cause redundant-decls warnings
   extern uint32_t SystemCoreClock;
 #endif
 
diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c
index 0a1c964ae..755220c13 100644
--- a/examples/device/cdc_msc_freertos/src/main.c
+++ b/examples/device/cdc_msc_freertos/src/main.c
@@ -123,15 +123,19 @@ void usb_device_task(void* param)
 {
   (void) param;
 
+  // init device stack on configured roothub port
   // This should be called after scheduler/kernel is started.
   // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
-  tusb_init();
+  tud_init(BOARD_TUD_RHPORT);
 
   // RTOS forever loop
   while (1)
   {
-    // tinyusb device task
+    // put this thread to waiting state until there is new events
     tud_task();
+
+    // following code only run if tud_task() process at least 1 event
+    tud_cdc_write_flush();
   }
 }
 
@@ -181,7 +185,7 @@ void cdc_task(void* params)
     // if ( tud_cdc_connected() )
     {
       // There are data available
-      if ( tud_cdc_available() )
+      while ( tud_cdc_available() )
       {
         uint8_t buf[64];
 
@@ -194,12 +198,13 @@ void cdc_task(void* params)
         // for throughput test e.g
         //    $ dd if=/dev/zero of=/dev/ttyACM0 count=10000
         tud_cdc_write(buf, count);
-        tud_cdc_write_flush();
       }
+
+      tud_cdc_write_flush();
     }
 
-    // For ESP32-S2 this delay is essential to allow idle how to run and reset wdt
-    vTaskDelay(pdMS_TO_TICKS(10));
+    // For ESP32-Sx this delay is essential to allow idle how to run and reset watchdog
+    vTaskDelay(1);
   }
 }
 
diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h
index 55e84c62d..0ec8896b9 100644
--- a/examples/device/cdc_msc_freertos/src/tusb_config.h
+++ b/examples/device/cdc_msc_freertos/src/tusb_config.h
@@ -30,53 +30,48 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by board.mk
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 // This examples use FreeRTOS
-#define CFG_TUSB_OS               OPT_OS_FREERTOS
+#define CFG_TUSB_OS           OPT_OS_FREERTOS
 
 // Espressif IDF requires "freertos/" prefix in include path
 #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
-  #define CFG_TUSB_OS_INC_PATH    freertos/
+#define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
 // can be defined by compiler in DEBUG build
 #ifndef CFG_TUSB_DEBUG
-  #define CFG_TUSB_DEBUG           0
+#define CFG_TUSB_DEBUG        0
 #endif
 
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -89,7 +84,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN    __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
@@ -97,7 +92,7 @@
 //--------------------------------------------------------------------
 
 #ifndef CFG_TUD_ENDPOINT0_SIZE
-#define CFG_TUD_ENDPOINT0_SIZE    64
+#define CFG_TUD_ENDPOINT0_SIZE   64
 #endif
 
 //------------- CLASS -------------//
diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c
index 9585822a3..30a712275 100644
--- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c
+++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c
@@ -247,7 +247,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -258,7 +258,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt
index abc4d91da..acaa54198 100644
--- a/examples/device/dfu/CMakeLists.txt
+++ b/examples/device/dfu/CMakeLists.txt
@@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC
 
 # Configure compilation flags and libraries for the example... see the corresponding function
 # in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
+family_configure_device_example(${PROJECT})
diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c
index 5c8464526..6bb183819 100644
--- a/examples/device/dfu/src/main.c
+++ b/examples/device/dfu/src/main.c
@@ -74,7 +74,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
diff --git a/examples/device/dfu/src/tusb_config.h b/examples/device/dfu/src/tusb_config.h
index d4779b2e1..38064147c 100644
--- a/examples/device/dfu/src/tusb_config.h
+++ b/examples/device/dfu/src/tusb_config.h
@@ -12,41 +12,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -60,7 +61,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
@@ -72,10 +73,10 @@
 #endif
 
 //------------- CLASS -------------//
-#define CFG_TUD_DFU    1
+#define CFG_TUD_DFU               1
 
 // DFU buffer size, it has to be set to the buffer size used in TUD_DFU_DESCRIPTOR
-#define CFG_TUD_DFU_XFER_BUFSIZE    ( OPT_MODE_HIGH_SPEED ? 512 : 64 )
+#define CFG_TUD_DFU_XFER_BUFSIZE  (TUD_OPT_HIGH_SPEED ? 512 : 64)
 
 #ifdef __cplusplus
  }
diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c
index 350334aa5..51a0d09f5 100644
--- a/examples/device/dfu/src/usb_descriptors.c
+++ b/examples/device/dfu/src/usb_descriptors.c
@@ -152,7 +152,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) {
       chr_count = 31;
     }
diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c
index 823c71ae5..55b380353 100644
--- a/examples/device/dfu_runtime/src/main.c
+++ b/examples/device/dfu_runtime/src/main.c
@@ -69,7 +69,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
diff --git a/examples/device/dfu_runtime/src/tusb_config.h b/examples/device/dfu_runtime/src/tusb_config.h
index e15ae7997..fa1ae6ed3 100644
--- a/examples/device/dfu_runtime/src/tusb_config.h
+++ b/examples/device/dfu_runtime/src/tusb_config.h
@@ -12,41 +12,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c
index 060943289..1b0a60551 100644
--- a/examples/device/dfu_runtime/src/usb_descriptors.c
+++ b/examples/device/dfu_runtime/src/usb_descriptors.c
@@ -147,7 +147,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) {
       chr_count = 31;
     }
@@ -160,7 +160,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u));
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c
index 4c10f55b0..33a603343 100644
--- a/examples/device/dynamic_configuration/src/main.c
+++ b/examples/device/dynamic_configuration/src/main.c
@@ -55,7 +55,9 @@ void midi_task(void);
 int main(void)
 {
   board_init();
-  tusb_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
@@ -179,7 +181,7 @@ void midi_task(void)
   start_ms += 286;
 
   // Previous positions in the note sequence.
-  int previous = note_pos - 1;
+  int previous = (int) (note_pos - 1);
 
   // If we currently are at position 0, set the
   // previous position to the last note in the sequence.
diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c
index a895f4738..e8cb03fdd 100644
--- a/examples/device/dynamic_configuration/src/msc_disk.c
+++ b/examples/device/dynamic_configuration/src/msc_disk.c
@@ -184,7 +184,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff
   uint8_t const* addr = msc_disk[lba] + offset;
   memcpy(buffer, addr, bufsize);
 
-  return bufsize;
+  return (int32_t) bufsize;
 }
 
 // Callback invoked when received WRITE10 command.
@@ -203,7 +203,7 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t*
   (void) lba; (void) offset; (void) buffer;
 #endif
 
-  return bufsize;
+  return (int32_t) bufsize;
 }
 
 // Callback invoked when received an SCSI command not in built-in list below
@@ -237,7 +237,7 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer,
   {
     if(in_xfer)
     {
-      memcpy(buffer, response, resplen);
+      memcpy(buffer, response, (size_t) resplen);
     }else
     {
       // SCSI output
diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h
index ddc295dcc..b9b3878cc 100644
--- a/examples/device/dynamic_configuration/src/tusb_config.h
+++ b/examples/device/dynamic_configuration/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -78,7 +79,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c
index 3352972a5..457f774d0 100644
--- a/examples/device/dynamic_configuration/src/usb_descriptors.c
+++ b/examples/device/dynamic_configuration/src/usb_descriptors.c
@@ -163,7 +163,7 @@ uint8_t const desc_configuration_0[] =
   TUD_CONFIG_DESCRIPTOR(1, ITF_0_NUM_TOTAL, 0, CONFIG_0_TOTAL_LEN, 0x00, 100),
 
   // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, 64),
+  TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
 
   // Interface number, string index, EP Out & EP In address, EP size
   TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
@@ -226,7 +226,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -237,7 +237,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c
index e5e2f6856..71afa3f46 100644
--- a/examples/device/hid_boot_interface/src/main.c
+++ b/examples/device/hid_boot_interface/src/main.c
@@ -55,7 +55,9 @@ void hid_task(void);
 int main(void)
 {
   board_init();
-  tusb_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
@@ -179,7 +181,7 @@ void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol)
 // Invoked when sent REPORT successfully to host
 // Application can use this to send the next report
 // Note: For composite reports, report[0] is report ID
-void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len)
+void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len)
 {
   (void) instance;
   (void) report;
diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h
index 1c8fa40b2..52723e09f 100644
--- a/examples/device/hid_boot_interface/src/tusb_config.h
+++ b/examples/device/hid_boot_interface/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -78,7 +79,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c
index 3fa48d98d..a0d7e9f15 100644
--- a/examples/device/hid_boot_interface/src/usb_descriptors.c
+++ b/examples/device/hid_boot_interface/src/usb_descriptors.c
@@ -163,7 +163,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -174,7 +174,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c
index fd25e620a..f7d76cfc7 100644
--- a/examples/device/hid_composite/src/main.c
+++ b/examples/device/hid_composite/src/main.c
@@ -56,7 +56,9 @@ void hid_task(void);
 int main(void)
 {
   board_init();
-  tusb_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
@@ -223,12 +225,12 @@ void hid_task(void)
 // Invoked when sent REPORT successfully to host
 // Application can use this to send the next report
 // Note: For composite reports, report[0] is report ID
-void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len)
+void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len)
 {
   (void) instance;
   (void) len;
 
-  uint8_t next_report_id = report[0] + 1;
+  uint8_t next_report_id = report[0] + 1u;
 
   if (next_report_id < REPORT_ID_COUNT)
   {
diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h
index d0f2b513f..6bd32c427 100644
--- a/examples/device/hid_composite/src/tusb_config.h
+++ b/examples/device/hid_composite/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c
index e760b20ba..2988baee2 100644
--- a/examples/device/hid_composite/src/usb_descriptors.c
+++ b/examples/device/hid_composite/src/usb_descriptors.c
@@ -210,7 +210,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -221,7 +221,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/hid_composite_freertos/.skip.MCU_F1C100S b/examples/device/hid_composite_freertos/.skip.MCU_F1C100S
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/device/hid_composite_freertos/.skip.MCU_F1C100S
+++ /dev/null
diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile
index c9b7abdf5..6c8c43ddd 100644
--- a/examples/device/hid_composite_freertos/Makefile
+++ b/examples/device/hid_composite_freertos/Makefile
@@ -29,7 +29,7 @@ SRC_C += \
 	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c))
 
 # Suppress FreeRTOS warnings
-CFLAGS += -Wno-error=cast-qual
+CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls
 
 # FreeRTOS (lto + Os) linker issue
 LDFLAGS += -Wl,--undefined=vTaskSwitchContext
diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt
index e64187fd4..1ee51a9d4 100644
--- a/examples/device/hid_composite_freertos/skip.txt
+++ b/examples/device/hid_composite_freertos/skip.txt
@@ -1,9 +1,11 @@
 mcu:CXD56
+mcu:F1C100S
+mcu:GD32VF103
+mcu:MKL25ZXX
 mcu:MSP430x5xx
-mcu:SAMD11
-mcu:VALENTYUSB_EPTRI
 mcu:RP2040
+mcu:SAMD11
 mcu:SAMX7X
-mcu:GD32VF103
-family:broadcom_64bit
-family:broadcom_32bit
\ No newline at end of file
+mcu:VALENTYUSB_EPTRI
+family:broadcom_32bit
+family:broadcom_64bit
\ No newline at end of file
diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c
index 1695f968c..b67c10937 100644
--- a/examples/device/hid_composite_freertos/src/main.c
+++ b/examples/device/hid_composite_freertos/src/main.c
@@ -125,15 +125,18 @@ void usb_device_task(void* param)
 {
   (void) param;
 
+  // init device stack on configured roothub port
   // This should be called after scheduler/kernel is started.
   // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
-  tusb_init();
+  tud_init(BOARD_TUD_RHPORT);
 
   // RTOS forever loop
   while (1)
   {
-    // tinyusb device task
+    // put this thread to waiting state until there is new events
     tud_task();
+
+    // following code only run if tud_task() process at least 1 event
   }
 }
 
@@ -291,7 +294,7 @@ void hid_task(void* param)
 // Invoked when sent REPORT successfully to host
 // Application can use this to send the next report
 // Note: For composite reports, report[0] is report ID
-void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len)
+void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len)
 {
   (void) instance;
   (void) len;
diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h
index 7522bd714..935ae9453 100644
--- a/examples/device/hid_composite_freertos/src/tusb_config.h
+++ b/examples/device/hid_composite_freertos/src/tusb_config.h
@@ -30,48 +30,48 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT     0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by board.mk
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 // This examples use FreeRTOS
-#define CFG_TUSB_OS               OPT_OS_FREERTOS
+#define CFG_TUSB_OS           OPT_OS_FREERTOS
 
 // Espressif IDF requires "freertos/" prefix in include path
 #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
-  #define CFG_TUSB_OS_INC_PATH    freertos/
+#define CFG_TUSB_OS_INC_PATH  freertos/
 #endif
 
-
+// can be defined by compiler in DEBUG build
 #ifndef CFG_TUSB_DEBUG
-#define CFG_TUSB_DEBUG           0
+#define CFG_TUSB_DEBUG        0
 #endif
 
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c
index 791813fdf..4df12d3db 100644
--- a/examples/device/hid_composite_freertos/src/usb_descriptors.c
+++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c
@@ -208,7 +208,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -219,7 +219,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c
index 32185560e..5b7daf118 100644
--- a/examples/device/hid_generic_inout/src/main.c
+++ b/examples/device/hid_generic_inout/src/main.c
@@ -80,7 +80,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h
index 9db50269c..98143ac4d 100644
--- a/examples/device/hid_generic_inout/src/tusb_config.h
+++ b/examples/device/hid_generic_inout/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -78,7 +79,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c
index 5dabf42a3..c2b4792c8 100644
--- a/examples/device/hid_generic_inout/src/usb_descriptors.c
+++ b/examples/device/hid_generic_inout/src/usb_descriptors.c
@@ -153,7 +153,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -164,7 +164,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c
index 7cb1d75a7..29ba74398 100644
--- a/examples/device/hid_multiple_interface/src/main.c
+++ b/examples/device/hid_multiple_interface/src/main.c
@@ -60,7 +60,9 @@ void hid_task(void);
 int main(void)
 {
   board_init();
-  tusb_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
diff --git a/examples/device/hid_multiple_interface/src/tusb_config.h b/examples/device/hid_multiple_interface/src/tusb_config.h
index 32e8c2843..49dc962fe 100644
--- a/examples/device/hid_multiple_interface/src/tusb_config.h
+++ b/examples/device/hid_multiple_interface/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
diff --git a/examples/device/hid_multiple_interface/src/usb_descriptors.c b/examples/device/hid_multiple_interface/src/usb_descriptors.c
index 9eef21504..42471a961 100644
--- a/examples/device/hid_multiple_interface/src/usb_descriptors.c
+++ b/examples/device/hid_multiple_interface/src/usb_descriptors.c
@@ -171,7 +171,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -182,7 +182,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c
index 193748477..3310348bd 100644
--- a/examples/device/midi_test/src/main.c
+++ b/examples/device/midi_test/src/main.c
@@ -62,7 +62,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
@@ -139,7 +140,7 @@ void midi_task(void)
   start_ms += 286;
 
   // Previous positions in the note sequence.
-  int previous = note_pos - 1;
+  int previous = (int) (note_pos - 1);
 
   // If we currently are at position 0, set the
   // previous position to the last note in the sequence.
diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h
index 967c71403..314dde438 100644
--- a/examples/device/midi_test/src/tusb_config.h
+++ b/examples/device/midi_test/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -78,7 +79,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c
index 8444237c6..c84a873b1 100644
--- a/examples/device/midi_test/src/usb_descriptors.c
+++ b/examples/device/midi_test/src/usb_descriptors.c
@@ -166,7 +166,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -177,7 +177,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c
index 0293261ad..96790d20c 100644
--- a/examples/device/msc_dual_lun/src/main.c
+++ b/examples/device/msc_dual_lun/src/main.c
@@ -54,7 +54,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c
index 37446ebc3..2b773b43b 100644
--- a/examples/device/msc_dual_lun/src/msc_disk_dual.c
+++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c
@@ -277,7 +277,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff
   uint8_t const* addr = (lun ? msc_disk1[lba] : msc_disk0[lba]) + offset;
   memcpy(buffer, addr, bufsize);
 
-  return bufsize;
+  return (int32_t) bufsize;
 }
 
 bool tud_msc_is_writable_cb (uint8_t lun)
@@ -305,7 +305,7 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t*
   (void) lun; (void) lba; (void) offset; (void) buffer;
 #endif
 
-  return bufsize;
+  return (int32_t) bufsize;
 }
 
 // Callback invoked when received an SCSI command not in built-in list below
@@ -339,7 +339,7 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer,
   {
     if(in_xfer)
     {
-      memcpy(buffer, response, resplen);
+      memcpy(buffer, response, (size_t) resplen);
     }else
     {
       // SCSI output
diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h
index f617f5a4c..9cbbbade9 100644
--- a/examples/device/msc_dual_lun/src/tusb_config.h
+++ b/examples/device/msc_dual_lun/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -78,7 +79,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c
index 2afd391af..68a671c91 100644
--- a/examples/device/msc_dual_lun/src/usb_descriptors.c
+++ b/examples/device/msc_dual_lun/src/usb_descriptors.c
@@ -168,7 +168,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -179,7 +179,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt
index 7500f6e9e..9fe1a325e 100644
--- a/examples/device/net_lwip_webserver/CMakeLists.txt
+++ b/examples/device/net_lwip_webserver/CMakeLists.txt
@@ -69,11 +69,13 @@ if (EXISTS ${TOP}/lib/lwip/src)
             ${TOP}/lib/networking/rndis_reports.c
             )
 
-    target_compile_definitions(${PROJECT} PUBLIC
-            PBUF_POOL_SIZE=2
-            TCP_WND=2*TCP_MSS
-            HTTPD_USE_CUSTOM_FSDATA=0
-            )
+    # due to warnings from other net source, we need to prevent error from some of the warnings options
+    target_compile_options(${PROJECT} PUBLIC
+        -Wno-error=null-dereference
+        -Wno-error=conversion
+        -Wno-error=sign-conversion
+        -Wno-error=sign-compare
+        )
 
     # Configure compilation flags and libraries for the example... see the corresponding function
     # in hw/bsp/FAMILY/family.cmake for details.
diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c
index 30bb3577b..33b4d38b6 100644
--- a/examples/device/net_lwip_webserver/src/main.c
+++ b/examples/device/net_lwip_webserver/src/main.c
@@ -228,7 +228,9 @@ int main(void)
 {
   /* initialize TinyUSB */
   board_init();
-  tusb_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   /* initialize lwip, dhcp-server, dns-server, and http */
   init_lwip();
diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h
index b1b48598b..fe72ecdfe 100644
--- a/examples/device/net_lwip_webserver/src/tusb_config.h
+++ b/examples/device/net_lwip_webserver/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -78,7 +79,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c
index 2b4b2a0c3..bee51790a 100644
--- a/examples/device/net_lwip_webserver/src/usb_descriptors.c
+++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c
@@ -231,7 +231,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > (TU_ARRAY_SIZE(_desc_str) - 1)) chr_count = TU_ARRAY_SIZE(_desc_str) - 1;
 
     // Convert ASCII string into UTF-16
@@ -242,7 +242,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/uac2_headset/skip.txt b/examples/device/uac2_headset/skip.txt
index 9471822a4..70d8e8838 100644
--- a/examples/device/uac2_headset/skip.txt
+++ b/examples/device/uac2_headset/skip.txt
@@ -3,4 +3,5 @@ mcu:LPC13XX
 mcu:NUC121
 mcu:SAMD11
 mcu:SAME5X
-mcu:SAMG
\ No newline at end of file
+mcu:SAMG
+board:stm32l052dap52
diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c
index 67e287d3e..003dc2a74 100644
--- a/examples/device/uac2_headset/src/main.c
+++ b/examples/device/uac2_headset/src/main.c
@@ -102,7 +102,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   TU_LOG1("Headset running\r\n");
 
@@ -156,9 +157,9 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t
   {
     if (request->bRequest == AUDIO_CS_REQ_CUR)
     {
-      TU_LOG1("Clock get current freq %u\r\n", current_sample_rate);
+      TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate);
 
-      audio_control_cur_4_t curf = { tu_htole32(current_sample_rate) };
+      audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) };
       return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf));
     }
     else if (request->bRequest == AUDIO_CS_REQ_RANGE)
@@ -170,8 +171,8 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t
       TU_LOG1("Clock get %d freq ranges\r\n", N_SAMPLE_RATES);
       for(uint8_t i = 0; i < N_SAMPLE_RATES; i++)
       {
-        rangef.subrange[i].bMin = sample_rates[i];
-        rangef.subrange[i].bMax = sample_rates[i];
+        rangef.subrange[i].bMin = (int32_t) sample_rates[i];
+        rangef.subrange[i].bMax = (int32_t) sample_rates[i];
         rangef.subrange[i].bRes = 0;
         TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes);
       }
@@ -203,9 +204,9 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t
   {
     TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t));
 
-    current_sample_rate = ((audio_control_cur_4_t const *)buf)->bCur;
+    current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur;
 
-    TU_LOG1("Clock set current freq: %d\r\n", current_sample_rate);
+    TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate);
 
     return true;
   }
@@ -402,9 +403,9 @@ void audio_task(void)
         // Combine two channels into one
         int32_t left = *src++;
         int32_t right = *src++;
-        *dst++ = (left >> 1) + (right >> 1);
+        *dst++ = (int16_t) ((left >> 1) + (right >> 1));
       }
-      tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2);
+      tud_audio_write((uint8_t *)mic_buf, (uint16_t) (spk_data_size / 2));
       spk_data_size = 0;
     }
     else if (current_resolution == 24)
@@ -417,9 +418,9 @@ void audio_task(void)
         // Combine two channels into one
         int32_t left = *src++;
         int32_t right = *src++;
-        *dst++ = ((left >> 1) + (right >> 1)) & 0xffffff00;
+        *dst++ = (int32_t) ((uint32_t) ((left >> 1) + (right >> 1)) & 0xffffff00ul);
       }
-      tud_audio_write((uint8_t *)mic_buf, spk_data_size / 2);
+      tud_audio_write((uint8_t *)mic_buf, (uint16_t) (spk_data_size / 2));
       spk_data_size = 0;
     }
   }
diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h
index 2a1189a79..1a3e23e95 100644
--- a/examples/device/uac2_headset/src/tusb_config.h
+++ b/examples/device/uac2_headset/src/tusb_config.h
@@ -31,30 +31,45 @@
 extern "C" {
 #endif
 
+#include "usb_descriptors.h"
+
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
 //--------------------------------------------------------------------
-// COMMON CONFIGURATION
+// Common Configuration
 //--------------------------------------------------------------------
 
-#include "usb_descriptors.h"
-
 // defined by compiler flags for flexibility
 #ifndef CFG_TUSB_MCU
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
 #ifndef CFG_TUSB_DEBUG
-// Can be set during compilation i.e.: make LOG=<value for CFG_TUSB_DEBUG> BOARD=<bsp>
-// Keep in mind that enabling logs when data is streaming can disrupt data flow.
-// It can be very helpful though when audio unit requests are tested/debugged.
-#define CFG_TUSB_DEBUG              0
+#define CFG_TUSB_DEBUG        0
 #endif
 
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
  * into those specific section.
@@ -67,7 +82,7 @@ extern "C" {
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c
index 9e97845b8..10f5cbd27 100644
--- a/examples/device/uac2_headset/src/usb_descriptors.c
+++ b/examples/device/uac2_headset/src/usb_descriptors.c
@@ -155,7 +155,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if (chr_count > 31) chr_count = 31;
 
     for (uint8_t i = 0; i < chr_count; i++)
@@ -165,7 +165,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2 * chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c
index 1fce48f45..6945d8743 100644
--- a/examples/device/usbtmc/src/main.c
+++ b/examples/device/usbtmc/src/main.c
@@ -54,7 +54,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h
index 5b2215be5..ab486b108 100644
--- a/examples/device/usbtmc/src/tusb_config.h
+++ b/examples/device/usbtmc/src/tusb_config.h
@@ -12,41 +12,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -60,7 +61,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/usbtmc/src/usb_descriptors.c b/examples/device/usbtmc/src/usb_descriptors.c
index 423482634..ff682ff97 100644
--- a/examples/device/usbtmc/src/usb_descriptors.c
+++ b/examples/device/usbtmc/src/usb_descriptors.c
@@ -37,6 +37,9 @@
 #define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
                            _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
 
+#define USB_VID   0xCafe
+#define USB_BCD   0x0200
+
 //--------------------------------------------------------------------+
 // Device Descriptors
 //--------------------------------------------------------------------+
@@ -51,9 +54,9 @@ tusb_desc_device_t const desc_device =
 
     .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
 
-    .idVendor           = 0xCafe,
+    .idVendor           = USB_VID,
     .idProduct          = USB_PID,
-    .bcdDevice          = 0x0100,
+    .bcdDevice          = USB_BCD,
 
     .iManufacturer      = 0x01,
     .iProduct           = 0x02,
@@ -75,22 +78,22 @@ uint8_t const * tud_descriptor_device_cb(void)
 
 #if defined(CFG_TUD_USBTMC)
 
-#  define TUD_USBTMC_DESC_MAIN(_itfnum,_bNumEndpoints) \
+#  define TUD_USBTMC_DESC_MAIN(_itfnum,_bNumEndpoints, _bulkMaxPacketLength) \
      TUD_USBTMC_IF_DESCRIPTOR(_itfnum, _bNumEndpoints,  /*_stridx = */ 4u, TUD_USBTMC_PROTOCOL_USB488), \
-     TUD_USBTMC_BULK_DESCRIPTORS(/* OUT = */0x01, /* IN = */ 0x81, /* packet size = */USBTMCD_MAX_PACKET_SIZE)
+     TUD_USBTMC_BULK_DESCRIPTORS(/* OUT = */0x01, /* IN = */ 0x81, /* packet size = */_bulkMaxPacketLength)
 
 #if CFG_TUD_USBTMC_ENABLE_INT_EP
 // USBTMC Interrupt xfer always has length of 2, but we use epMaxSize=8 for
 //  compatibility with mcus that only allow 8, 16, 32 or 64 for FS endpoints
-#  define TUD_USBTMC_DESC(_itfnum) \
-     TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 3), \
+#  define TUD_USBTMC_DESC(_itfnum, _bulkMaxPacketLength) \
+     TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 3, _bulkMaxPacketLength), \
      TUD_USBTMC_INT_DESCRIPTOR(/* INT ep # */ 0x82, /* epMaxSize = */ 8, /* bInterval = */16u )
 #  define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN + TUD_USBTMC_INT_DESCRIPTOR_LEN)
 
 #else
 
-#  define TUD_USBTMC_DESC(_itfnum) \
-     TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 2u)
+#  define TUD_USBTMC_DESC(_itfnum, _bulkMaxPacketLength) \
+     TUD_USBTMC_DESC_MAIN(_itfnum, /* _epCount = */ 2u, _bulkMaxPacketLength)
 #  define TUD_USBTMC_DESC_LEN (TUD_USBTMC_IF_DESCRIPTOR_LEN + TUD_USBTMC_BULK_DESCRIPTORS_LEN)
 
 #endif /* CFG_TUD_USBTMC_ENABLE_INT_EP */
@@ -119,21 +122,66 @@ enum
 #endif
 
 
-uint8_t const desc_configuration[] =
+uint8_t const desc_fs_configuration[] =
 {
   // Config number, interface count, string index, total length, attribute, power in mA
   TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
 
-  TUD_USBTMC_DESC(ITF_NUM_USBTMC),
+  TUD_USBTMC_DESC(ITF_NUM_USBTMC, /* _bulkMaxPacketLength = */ 64),
 };
 
+#if TUD_OPT_HIGH_SPEED
+
+uint8_t const desc_hs_configuration[] =
+{
+  // Config number, interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
+
+  TUD_USBTMC_DESC(ITF_NUM_USBTMC, /* _bulkMaxPacketLength = */ 512),
+};
+
+// other speed configuration
+uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN];
+
+// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
+tusb_desc_device_qualifier_t const desc_device_qualifier =
+{
+  .bLength            = sizeof(tusb_desc_device_qualifier_t),
+  .bDescriptorType    = TUSB_DESC_DEVICE_QUALIFIER,
+  .bcdUSB             = USB_BCD,
+
+  .bDeviceClass       = 0x00,
+  .bDeviceSubClass    = 0x00,
+  .bDeviceProtocol    = 0x00,
+
+  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+  .bNumConfigurations = 0x01,
+  .bReserved          = 0x00
+};
+
+// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
+// device_qualifier descriptor describes information about a high-speed capable device that would
+// change if the device were operating at the other speed. If not highspeed capable stall this request.
+uint8_t const* tud_descriptor_device_qualifier_cb(void)
+{
+  return (uint8_t const*) &desc_device_qualifier;
+}
+
+#endif
+
 // Invoked when received GET CONFIGURATION DESCRIPTOR
 // Application return pointer to descriptor
 // Descriptor contents must exist long enough for transfer to complete
 uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
 {
   (void) index; // for multiple configurations
-  return desc_configuration;
+#if TUD_OPT_HIGH_SPEED
+  // Although we are highspeed, host may be fullspeed.
+  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
+#else
+  return desc_fs_configuration;
+#endif
 }
 
 //--------------------------------------------------------------------+
@@ -175,7 +223,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) {
       chr_count = 31;
     }
diff --git a/examples/device/usbtmc/visaQuery.py b/examples/device/usbtmc/visaQuery.py
index 50a765a03..c4e5ad2b9 100644
--- a/examples/device/usbtmc/visaQuery.py
+++ b/examples/device/usbtmc/visaQuery.py
@@ -1,6 +1,6 @@
 #!/usr/bin/env python3
 
-import visa
+import pyvisa
 import time
 import sys
 
@@ -54,9 +54,9 @@ def test_srq():
 	assert (inst.read_stb() == 0)
 	inst.write("123")
 	
-	#inst.enable_event(visa.constants.VI_EVENT_SERVICE_REQ, visa.constants.VI_QUEUE)
-	#waitrsp = inst.wait_on_event(visa.constants.VI_EVENT_SERVICE_REQ, 5000)
-	#inst.discard_events(visa.constants.VI_EVENT_SERVICE_REQ, visa.constants.VI_QUEUE)
+	#inst.enable_event(pyvisa.constants.VI_EVENT_SERVICE_REQ, pyvisa.constants.VI_QUEUE)
+	#waitrsp = inst.wait_on_event(pyvisa.constants.VI_EVENT_SERVICE_REQ, 5000)
+	#inst.discard_events(pyvisa.constants.VI_EVENT_SERVICE_REQ, pyvisa.constants.VI_QUEUE)
 	#inst.wait_for_srq()
 	time.sleep(0.3)
 	stb = inst.read_stb()
@@ -77,8 +77,8 @@ def test_read_timeout():
 	t0 = time.monotonic()
 	try:
 		rsp = inst.read()
-		assert(false), "Read should have resulted in timeout"
-	except visa.VisaIOError:
+		assert(False), "Read should have resulted in timeout"
+	except pyvisa.VisaIOError:
 		print("  Got expected exception")
 	t = time.monotonic() - t0
 	assert ((t*1000.0) > (inst.timeout - 300))
@@ -99,23 +99,27 @@ def test_abort_in():
 	t0 = time.monotonic()
 	try:
 		rsp = inst.read()
-		assert(false), "Read should have resulted in timeout"
-	except visa.VisaIOError:
+		assert(False), "Read should have resulted in timeout"
+	except pyvisa.VisaIOError:
 		print("  Got expected exception")
 	t = time.monotonic() - t0
 	assert ((t*1000.0) > (inst.timeout - 300))
 	assert ((t*1000.0) < (inst.timeout + 300))
 	print(f"  Delay was {t:0.3}")
-	# Response is still in queue, so send a clear (to be more helpful to the next test)
+	# Response is still in queue, so read it out (to be more helpful to the next test)
 	inst.timeout = 800
 	y = inst.read()
 	assert(y == "xxx\r\n")
 	
 def test_indicate():
 	# perform indicator pulse
-	usb_iface = inst.get_visa_attribute(visa.constants.VI_ATTR_USB_INTFC_NUM)
+	usb_iface = inst.get_visa_attribute(pyvisa.constants.VI_ATTR_USB_INTFC_NUM)
 	retv = inst.control_in(request_type_bitmap_field=0xA1, request_id=64, request_value=0x0000, index=usb_iface, length=0x0001)
-	assert((retv[1] == visa.constants.StatusCode(0)) and (retv[0] == b'\x01')), f"indicator pulse failed: retv={retv}"
+	# pyvisa used to return (statuscode,bytes), but now only returns bytes, so we need to handle both cases
+	if(isinstance(retv,bytes)):
+		assert(retv == b'\x01')
+	else:
+		assert((retv[1] == pyvisa.constants.StatusCode(0)) and (retv[0] == b'\x01')), f"indicator pulse failed: retv={retv}"
 	
 	
 def test_multi_read():
@@ -131,19 +135,19 @@ def test_multi_read():
 	#inst.chunk_size = old_chunk_size
 	
 def test_stall_ep0():
-	usb_iface = inst.get_visa_attribute(visa.constants.VI_ATTR_USB_INTFC_NUM)
+	usb_iface = inst.get_visa_attribute(pyvisa.constants.VI_ATTR_USB_INTFC_NUM)
 	inst.read_stb()
 	# This is an invalid request, should create stall.
 	try:
 		retv = inst.control_in(request_type_bitmap_field=0xA1, request_id=60, request_value=0x0000, index=usb_iface, length=0x0001)
-		assert false
-	except visa.VisaIOError:
+		assert(False)
+	except pyvisa.VisaIOError:
 		pass
 	
 	assert (inst.read_stb() == 0)
 
 
-rm = visa.ResourceManager()
+rm = pyvisa.ResourceManager()
 reslist = rm.list_resources("USB?::?*::INSTR")
 print(reslist)
 
@@ -167,7 +171,6 @@ inst.timeout = 2000
 print("+ multi read")
 test_multi_read()
 
-
 print("+ echo delay=0")
 inst.write("delay 0")
 test_echo(1,175)
diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt
index cb321f9a8..b92a2b804 100644
--- a/examples/device/video_capture/CMakeLists.txt
+++ b/examples/device/video_capture/CMakeLists.txt
@@ -12,6 +12,12 @@ family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
 
 add_executable(${PROJECT})
 
+if (FORCE_READONLY)
+target_compile_definitions(${PROJECT} PRIVATE
+  CFG_EXAMPLE_VIDEO_READONLY
+)
+endif()
+
 # Example source
 target_sources(${PROJECT} PUBLIC
   ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
diff --git a/examples/device/video_capture/Makefile b/examples/device/video_capture/Makefile
index 69b633fea..fda66bcc1 100644
--- a/examples/device/video_capture/Makefile
+++ b/examples/device/video_capture/Makefile
@@ -1,6 +1,13 @@
 include ../../../tools/top.mk
 include ../../make.mk
 
+ifeq ($(DISABLE_MJPEG),1)
+CFLAGS += -DCFG_EXAMPLE_VIDEO_DISABLE_MJPEG
+endif
+ifeq ($(FORCE_READONLY),1)
+CFLAGS += -DCFG_EXAMPLE_VIDEO_READONLY
+endif
+
 INC += \
 	src \
 	$(TOP)/hw \
diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt
index 892a8c6a7..5898664a2 100644
--- a/examples/device/video_capture/skip.txt
+++ b/examples/device/video_capture/skip.txt
@@ -1,2 +1,3 @@
 mcu:MSP430x5xx
-mcu:SAMD11
\ No newline at end of file
+mcu:NUC121
+mcu:SAMD11
diff --git a/examples/device/video_capture/src/images.h b/examples/device/video_capture/src/images.h
index 1b13cfe81..0398428b3 100644
--- a/examples/device/video_capture/src/images.h
+++ b/examples/device/video_capture/src/images.h
@@ -1,3 +1,4 @@
+#if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG)
 static const unsigned char frame_buffer[128 * (96 + 1) * 2] = {
   /* 0 */
   0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80,
@@ -1649,3 +1650,287 @@ static const unsigned char frame_buffer[128 * (96 + 1) * 2] = {
   0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80,
   0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80,
 };
+#else
+
+#define color_bar_0_jpg_len  511
+#define color_bar_1_jpg_len  512
+#define color_bar_2_jpg_len  511
+#define color_bar_3_jpg_len  511
+#define color_bar_4_jpg_len  511
+#define color_bar_5_jpg_len  512
+#define color_bar_6_jpg_len  511
+#define color_bar_7_jpg_len  511
+
+unsigned char color_bar_0_jpg[] = {
+  0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11,
+  0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff,
+  0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x92, 0x8a, 0x00,
+  0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45,
+  0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89,
+  0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad,
+  0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25,
+  0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3,
+  0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1,
+  0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00,
+  0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45,
+  0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89,
+  0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad,
+  0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25,
+  0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3,
+  0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1,
+  0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00,
+  0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45,
+  0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89,
+  0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad,
+  0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25,
+  0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3,
+  0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1,
+  0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0xff, 0xd9
+};
+unsigned char color_bar_1_jpg[] = {
+  0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11,
+  0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff,
+  0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x7d, 0x15, 0x98,
+  0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94,
+  0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32,
+  0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51,
+  0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63,
+  0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45,
+  0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84,
+  0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98,
+  0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94,
+  0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32,
+  0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51,
+  0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63,
+  0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45,
+  0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84,
+  0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98,
+  0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94,
+  0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32,
+  0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51,
+  0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63,
+  0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45,
+  0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84,
+  0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x7f, 0xff, 0xd9
+};
+unsigned char color_bar_2_jpg[] = {
+  0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11,
+  0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff,
+  0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x75, 0x14, 0xcc,
+  0xc4, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94,
+  0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18,
+  0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51,
+  0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61,
+  0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66,
+  0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25,
+  0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c,
+  0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94,
+  0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18,
+  0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51,
+  0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61,
+  0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66,
+  0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25,
+  0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c,
+  0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94,
+  0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18,
+  0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51,
+  0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61,
+  0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66,
+  0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25,
+  0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x33, 0xff, 0xd9
+};
+unsigned char color_bar_3_jpg[] = {
+  0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11,
+  0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff,
+  0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x5a, 0x2a, 0x08,
+  0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a,
+  0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c,
+  0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac,
+  0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4,
+  0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9,
+  0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12,
+  0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63,
+  0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a,
+  0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c,
+  0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac,
+  0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4,
+  0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9,
+  0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12,
+  0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63,
+  0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a,
+  0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c,
+  0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac,
+  0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4,
+  0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9,
+  0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12,
+  0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x91, 0xff, 0xd9
+};
+unsigned char color_bar_4_jpg[] = {
+  0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11,
+  0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff,
+  0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x4a, 0x2a, 0xcb,
+  0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56,
+  0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62,
+  0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4,
+  0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09,
+  0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31,
+  0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5,
+  0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36,
+  0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56,
+  0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62,
+  0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4,
+  0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09,
+  0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31,
+  0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5,
+  0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36,
+  0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56,
+  0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62,
+  0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4,
+  0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09,
+  0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31,
+  0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5,
+  0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x9f, 0xff, 0xd9
+};
+unsigned char color_bar_5_jpg[] = {
+  0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11,
+  0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff,
+  0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x6d, 0x14, 0x8d,
+  0x04, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15,
+  0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32,
+  0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56,
+  0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65,
+  0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c,
+  0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28,
+  0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98,
+  0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15,
+  0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32,
+  0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56,
+  0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65,
+  0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c,
+  0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28,
+  0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98,
+  0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15,
+  0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32,
+  0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56,
+  0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65,
+  0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c,
+  0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28,
+  0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x7f, 0xff, 0xd9
+};
+unsigned char color_bar_6_jpg[] = {
+  0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11,
+  0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff,
+  0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x65, 0x15, 0xa0,
+  0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15,
+  0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19,
+  0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b,
+  0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a,
+  0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66,
+  0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45,
+  0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c,
+  0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15,
+  0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19,
+  0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b,
+  0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a,
+  0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66,
+  0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45,
+  0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c,
+  0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15,
+  0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19,
+  0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b,
+  0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a,
+  0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66,
+  0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45,
+  0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x33, 0xff, 0xd9
+};
+unsigned char color_bar_7_jpg[] = {
+  0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11,
+  0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff,
+  0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x8e, 0x8a, 0x00,
+  0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad,
+  0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25,
+  0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3,
+  0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2,
+  0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6,
+  0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a,
+  0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c,
+  0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad,
+  0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25,
+  0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3,
+  0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2,
+  0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6,
+  0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a,
+  0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c,
+  0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad,
+  0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25,
+  0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3,
+  0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2,
+  0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6,
+  0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a,
+  0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x47, 0xff, 0xd9
+};
+#endif
diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c
index f1d48385f..3ceebe821 100644
--- a/examples/device/video_capture/src/main.c
+++ b/examples/device/video_capture/src/main.c
@@ -55,7 +55,9 @@ void video_task(void);
 int main(void)
 {
   board_init();
-  tusb_init();
+
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
@@ -110,6 +112,23 @@ static unsigned interval_ms = 1000 / FRAME_RATE;
 /* YUY2 frame buffer */
 #ifdef CFG_EXAMPLE_VIDEO_READONLY
 #include "images.h"
+
+# if !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG)
+static struct {
+  uint32_t       size;
+  uint8_t const *buffer;
+} const frames[] = {
+  {color_bar_0_jpg_len, color_bar_0_jpg},
+  {color_bar_1_jpg_len, color_bar_1_jpg},
+  {color_bar_2_jpg_len, color_bar_2_jpg},
+  {color_bar_3_jpg_len, color_bar_3_jpg},
+  {color_bar_4_jpg_len, color_bar_4_jpg},
+  {color_bar_5_jpg_len, color_bar_5_jpg},
+  {color_bar_6_jpg_len, color_bar_6_jpg},
+  {color_bar_7_jpg_len, color_bar_7_jpg},
+};
+# endif
+
 #else
 static uint8_t frame_buffer[FRAME_WIDTH * FRAME_HEIGHT * 16 / 8];
 static void fill_color_bar(uint8_t *buffer, unsigned start_position)
@@ -166,8 +185,12 @@ void video_task(void)
     already_sent = 1;
     start_ms = board_millis();
 #ifdef CFG_EXAMPLE_VIDEO_READONLY
-    tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t) &frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4],
+# if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG)
+    tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4],
                            FRAME_WIDTH * FRAME_HEIGHT * 16/8);
+# else
+    tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size);
+# endif
 #else
     fill_color_bar(frame_buffer, frame_num);
     tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8);
@@ -180,8 +203,12 @@ void video_task(void)
   start_ms += interval_ms;
 
 #ifdef CFG_EXAMPLE_VIDEO_READONLY
-  tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t) &frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4],
+# if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG)
+  tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4],
                          FRAME_WIDTH * FRAME_HEIGHT * 16/8);
+# else
+  tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size);
+# endif
 #else
   fill_color_bar(frame_buffer, frame_num);
   tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8);
diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h
index 3a079e66b..e567ba669 100644
--- a/examples/device/video_capture/src/tusb_config.h
+++ b/examples/device/video_capture/src/tusb_config.h
@@ -30,37 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
-// This example doesn't use an RTOS
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -74,7 +79,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c
index da8ec8e89..499ee311c 100644
--- a/examples/device/video_capture/src/usb_descriptors.c
+++ b/examples/device/video_capture/src/usb_descriptors.c
@@ -75,7 +75,11 @@ uint8_t const * tud_descriptor_device_cb(void)
 // Configuration Descriptor
 //--------------------------------------------------------------------+
 
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_LEN)
+#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG)
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_MJPEG_LEN)
+#else
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_UNCOMPR_LEN)
+#endif
 
 #if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX)
   // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
@@ -96,9 +100,15 @@ uint8_t const desc_fs_configuration[] =
   // Config number, interface count, string index, total length, attribute, power in mA
   TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0, 500),
   // IAD for Video Control
-  TUD_VIDEO_CAPTURE_DESCRIPTOR(4, EPNUM_VIDEO_IN,
-                               FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE,
-                               CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE)
+#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG)
+  TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPEG(4, EPNUM_VIDEO_IN,
+                                     FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE,
+                                     CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE)
+#else
+  TUD_VIDEO_CAPTURE_DESCRIPTOR_UNCOMPR(4, EPNUM_VIDEO_IN,
+                                       FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE,
+                                       CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE)
+#endif
 };
 
 // Invoked when received GET CONFIGURATION DESCRIPTOR
@@ -149,7 +159,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -160,7 +170,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/device/video_capture/src/usb_descriptors.h b/examples/device/video_capture/src/usb_descriptors.h
index 23511c909..f1ed3c8e9 100644
--- a/examples/device/video_capture/src/usb_descriptors.h
+++ b/examples/device/video_capture/src/usb_descriptors.h
@@ -38,12 +38,12 @@
 #define FRAME_RATE    10
 
 enum {
-  ITF_NUM_VIDEO_CONTROL = 0,
+  ITF_NUM_VIDEO_CONTROL,
   ITF_NUM_VIDEO_STREAMING,
   ITF_NUM_TOTAL
 };
 
-#define TUD_VIDEO_CAPTURE_DESC_LEN (\
+#define TUD_VIDEO_CAPTURE_DESC_UNCOMPR_LEN (\
     TUD_VIDEO_DESC_IAD_LEN\
     /* control */\
     + TUD_VIDEO_DESC_STD_VC_LEN\
@@ -61,6 +61,24 @@ enum {
     + 7/* Endpoint */\
   )
 
+#define TUD_VIDEO_CAPTURE_DESC_MJPEG_LEN (\
+    TUD_VIDEO_DESC_IAD_LEN\
+    /* control */\
+    + TUD_VIDEO_DESC_STD_VC_LEN\
+    + (TUD_VIDEO_DESC_CS_VC_LEN + 1/*bInCollection*/)\
+    + TUD_VIDEO_DESC_CAMERA_TERM_LEN\
+    + TUD_VIDEO_DESC_OUTPUT_TERM_LEN\
+    /* Interface 1, Alternate 0 */\
+    + TUD_VIDEO_DESC_STD_VS_LEN\
+    + (TUD_VIDEO_DESC_CS_VS_IN_LEN + 1/*bNumFormats x bControlSize*/)\
+    + TUD_VIDEO_DESC_CS_VS_FMT_MJPEG_LEN\
+    + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT_LEN\
+    + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN\
+    /* Interface 1, Alternate 1 */\
+    + TUD_VIDEO_DESC_STD_VS_LEN\
+    + 7/* Endpoint */\
+  )
+
 /* Windows support YUY2 and NV12
  * https://docs.microsoft.com/en-us/windows-hardware/drivers/stream/usb-video-class-driver-overview */
 
@@ -73,20 +91,20 @@ enum {
 #define TUD_VIDEO_DESC_CS_VS_FMT_I420(_fmtidx, _numfmtdesc, _frmidx, _asrx, _asry, _interlace, _cp) \
   TUD_VIDEO_DESC_CS_VS_FMT_UNCOMPR(_fmtidx, _numfmtdesc, TUD_VIDEO_GUID_I420, 12, _frmidx, _asrx, _asry, _interlace, _cp)
 
-#define TUD_VIDEO_CAPTURE_DESCRIPTOR(_stridx, _epin, _width, _height, _fps, _epsize) \
-  TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, ITF_NUM_TOTAL, _stridx), \
+#define TUD_VIDEO_CAPTURE_DESCRIPTOR_UNCOMPR(_stridx, _epin, _width, _height, _fps, _epsize) \
+  TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, /* 2 Interfaces */ 0x02, _stridx), \
   /* Video control 0 */ \
   TUD_VIDEO_DESC_STD_VC(ITF_NUM_VIDEO_CONTROL, 0, _stridx), \
     TUD_VIDEO_DESC_CS_VC( /* UVC 1.5*/ 0x0150, \
          /* wTotalLength - bLength */ \
          TUD_VIDEO_DESC_CAMERA_TERM_LEN + TUD_VIDEO_DESC_OUTPUT_TERM_LEN, \
-         UVC_CLOCK_FREQUENCY, 1), \
+         UVC_CLOCK_FREQUENCY, ITF_NUM_VIDEO_STREAMING), \
       TUD_VIDEO_DESC_CAMERA_TERM(UVC_ENTITY_CAP_INPUT_TERMINAL, 0, 0,\
                                  /*wObjectiveFocalLengthMin*/0, /*wObjectiveFocalLengthMax*/0,\
                                  /*wObjectiveFocalLength*/0, /*bmControls*/0), \
       TUD_VIDEO_DESC_OUTPUT_TERM(UVC_ENTITY_CAP_OUTPUT_TERMINAL, VIDEO_TT_STREAMING, 0, 1, 0), \
   /* Video stream alt. 0 */ \
-  TUD_VIDEO_DESC_STD_VS( 1, 0, 0, 0), \
+  TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 0, 0, _stridx), \
     /* Video stream header for without still image capture */ \
     TUD_VIDEO_DESC_CS_VS_INPUT( /*bNumFormats*/1, \
         /*wTotalLength - bLength */\
@@ -106,7 +124,44 @@ enum {
             (10000000/_fps), (10000000/_fps), (10000000/_fps)*_fps, (10000000/_fps)), \
         TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING(VIDEO_COLOR_PRIMARIES_BT709, VIDEO_COLOR_XFER_CH_BT709, VIDEO_COLOR_COEF_SMPTE170M), \
   /* VS alt 1 */\
-  TUD_VIDEO_DESC_STD_VS(1, 1, 1, 0), \
+  TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 1, 1, _stridx), \
+    /* EP */ \
+    TUD_VIDEO_DESC_EP_ISO(_epin, _epsize, 1)
+
+#define TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPEG(_stridx, _epin, _width, _height, _fps, _epsize) \
+  TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, /* 2 Interfaces */ 0x02, _stridx), \
+  /* Video control 0 */ \
+  TUD_VIDEO_DESC_STD_VC(ITF_NUM_VIDEO_CONTROL, 0, _stridx), \
+    TUD_VIDEO_DESC_CS_VC( /* UVC 1.5*/ 0x0150, \
+         /* wTotalLength - bLength */ \
+         TUD_VIDEO_DESC_CAMERA_TERM_LEN + TUD_VIDEO_DESC_OUTPUT_TERM_LEN, \
+         UVC_CLOCK_FREQUENCY, ITF_NUM_VIDEO_STREAMING), \
+      TUD_VIDEO_DESC_CAMERA_TERM(UVC_ENTITY_CAP_INPUT_TERMINAL, 0, 0,\
+                                 /*wObjectiveFocalLengthMin*/0, /*wObjectiveFocalLengthMax*/0,\
+                                 /*wObjectiveFocalLength*/0, /*bmControls*/0), \
+      TUD_VIDEO_DESC_OUTPUT_TERM(UVC_ENTITY_CAP_OUTPUT_TERMINAL, VIDEO_TT_STREAMING, 0, 1, 0), \
+  /* Video stream alt. 0 */ \
+  TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 0, 0, _stridx), \
+    /* Video stream header for without still image capture */ \
+    TUD_VIDEO_DESC_CS_VS_INPUT( /*bNumFormats*/1, \
+        /*wTotalLength - bLength */\
+        TUD_VIDEO_DESC_CS_VS_FMT_MJPEG_LEN\
+        + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT_LEN\
+        + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN,\
+        _epin, /*bmInfo*/0, /*bTerminalLink*/UVC_ENTITY_CAP_OUTPUT_TERMINAL, \
+        /*bStillCaptureMethod*/0, /*bTriggerSupport*/0, /*bTriggerUsage*/0, \
+        /*bmaControls(1)*/0), \
+      /* Video stream format */ \
+      TUD_VIDEO_DESC_CS_VS_FMT_MJPEG(/*bFormatIndex*/1, /*bNumFrameDescriptors*/1, \
+        /*bmFlags*/0, /*bDefaultFrameIndex*/1, 0, 0, 0, /*bCopyProtect*/0), \
+        /* Video stream frame format */ \
+        TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT(/*bFrameIndex */1, 0, _width, _height, \
+            _width * _height * 16, _width * _height * 16 * _fps, \
+            _width * _height * 16 / 8, \
+            (10000000/_fps), (10000000/_fps), (10000000/_fps)*_fps, (10000000/_fps)), \
+        TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING(VIDEO_COLOR_PRIMARIES_BT709, VIDEO_COLOR_XFER_CH_BT709, VIDEO_COLOR_COEF_SMPTE170M), \
+  /* VS alt 1 */\
+  TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 1, 1, _stridx), \
     /* EP */ \
     TUD_VIDEO_DESC_EP_ISO(_epin, _epsize, 1)
 
diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c
index 2716825f8..604d30a83 100644
--- a/examples/device/webusb_serial/src/main.c
+++ b/examples/device/webusb_serial/src/main.c
@@ -71,7 +71,7 @@ enum  {
 
 static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
 
-#define URL  "example.tinyusb.org/webusb-serial/"
+#define URL  "example.tinyusb.org/webusb-serial/index.html"
 
 const tusb_desc_webusb_url_t desc_url =
 {
@@ -93,7 +93,8 @@ int main(void)
 {
   board_init();
 
-  tusb_init();
+  // init device stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
 
   while (1)
   {
@@ -113,6 +114,7 @@ void echo_all(uint8_t buf[], uint32_t count)
   if ( web_serial_connected )
   {
     tud_vendor_write(buf, count);
+    tud_vendor_flush();
   }
 
   // echo to cdc
@@ -210,7 +212,8 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ
           board_led_write(true);
           blink_interval_ms = BLINK_ALWAYS_ON;
 
-          tud_vendor_write_str("\r\nTinyUSB WebUSB device example\r\n");
+          tud_vendor_write_str("\r\nWebUSB interface connected\r\n");
+          tud_vendor_flush();
         }else
         {
           blink_interval_ms = BLINK_MOUNTED;
diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h
index f5e4694e3..fde732b9e 100644
--- a/examples/device/webusb_serial/src/tusb_config.h
+++ b/examples/device/webusb_serial/src/tusb_config.h
@@ -30,41 +30,42 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to max (auto) speed for MCU with internal HighSpeed PHY
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+//--------------------------------------------------------------------
+// Common Configuration
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack
+#define CFG_TUD_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -78,7 +79,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c
index 93e802a90..cafe2c22b 100644
--- a/examples/device/webusb_serial/src/usb_descriptors.c
+++ b/examples/device/webusb_serial/src/usb_descriptors.c
@@ -235,7 +235,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
     const char* str = string_desc_arr[index];
 
     // Cap at max char
-    chr_count = strlen(str);
+    chr_count = (uint8_t) strlen(str);
     if ( chr_count > 31 ) chr_count = 31;
 
     // Convert ASCII string into UTF-16
@@ -246,7 +246,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/dual/CMakeLists.txt b/examples/dual/CMakeLists.txt
new file mode 100644
index 000000000..d2f9a42f0
--- /dev/null
+++ b/examples/dual/CMakeLists.txt
@@ -0,0 +1,12 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake)
+
+project(tinyusb_dual_examples)
+family_initialize_project(tinyusb_dual_examples ${CMAKE_CURRENT_LIST_DIR})
+if (FAMILY STREQUAL "rp2040" AND NOT TARGET tinyusb_pico_pio_usb)
+    message("Skipping dual host/device mode examples as Pico-PIO-USB is not available")
+else()
+    # family_add_subdirectory will filter what to actually add based on selected FAMILY
+    family_add_subdirectory(host_hid_to_device_cdc)
+endif()
diff --git a/examples/host/hid_to_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt
index abc4d91da..fc9bbfc13 100644
--- a/examples/host/hid_to_cdc/CMakeLists.txt
+++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt
@@ -25,4 +25,16 @@ target_include_directories(${PROJECT} PUBLIC
 
 # Configure compilation flags and libraries for the example... see the corresponding function
 # in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT})
\ No newline at end of file
+family_configure_dual_usb_example(${PROJECT})
+
+# due to warnings from other net source, we need to prevent error from some of the warnings options
+target_compile_options(${PROJECT} PUBLIC
+        -Wno-error=shadow
+        -Wno-error=cast-align
+        -Wno-error=cast-qual
+        -Wno-error=redundant-decls
+        -Wno-error=sign-conversion
+        -Wno-error=conversion
+        -Wno-error=sign-compare
+        -Wno-error=unused-function
+        )
diff --git a/examples/host/hid_to_cdc/Makefile b/examples/dual/host_hid_to_device_cdc/Makefile
index 3fe9b0888..3fe9b0888 100644
--- a/examples/host/hid_to_cdc/Makefile
+++ b/examples/dual/host_hid_to_device_cdc/Makefile
diff --git a/examples/host/hid_to_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt
index 78d94e3ce..6ee8e3fde 100644
--- a/examples/host/hid_to_cdc/only.txt
+++ b/examples/dual/host_hid_to_device_cdc/only.txt
@@ -1,2 +1,3 @@
 board:mimxrt1060_evk
 board:mimxrt1064_evk
+mcu:RP2040
diff --git a/examples/host/hid_to_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c
index cdf5d264e..bd7870274 100644
--- a/examples/host/hid_to_cdc/src/main.c
+++ b/examples/dual/host_hid_to_device_cdc/src/main.c
@@ -23,10 +23,8 @@
  *
  */
 
-// This example runs both host and device concurrently. The USB host looks for
-// any HID device with reports that are 8 bytes long and then assumes they are
-// keyboard reports. It translates the keypresses of the reports to ASCII and
-// transmits it over CDC to the device's host.
+// This example runs both host and device concurrently. The USB host receive
+// reports from HID device and print it out over USB Device CDC interface.
 
 #include <stdlib.h>
 #include <stdio.h>
@@ -73,28 +71,30 @@ enum  {
 static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
 
 void led_blinking_task(void);
-void cdc_task(void);
 
 /*------------- MAIN -------------*/
 int main(void)
 {
   board_init();
-  tusb_init();
+
+  printf("TinyUSB Host HID <-> Device CDC Example\r\n");
+
+  // init device and host stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+  tuh_init(BOARD_TUH_RHPORT);
 
   while (1)
   {
     tud_task(); // tinyusb device task
     tuh_task(); // tinyusb host task
     led_blinking_task();
-
-    cdc_task();
   }
 
   return 0;
 }
 
 //--------------------------------------------------------------------+
-// Device callbacks
+// Device CDC
 //--------------------------------------------------------------------+
 
 // Invoked when device is mounted
@@ -124,8 +124,20 @@ void tud_resume_cb(void)
   blink_interval_ms = BLINK_MOUNTED;
 }
 
+// Invoked when CDC interface received data from host
+void tud_cdc_rx_cb(uint8_t itf)
+{
+  (void) itf;
+
+  char buf[64];
+  uint32_t count = tud_cdc_read(buf, sizeof(buf));
+
+  // TODO control LED on keyboard of host stack
+  (void) count;
+}
+
 //--------------------------------------------------------------------+
-// Host callbacks
+// Host HID
 //--------------------------------------------------------------------+
 
 // Invoked when device with hid interface is mounted
@@ -137,169 +149,140 @@ void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_re
 {
   (void)desc_report;
   (void)desc_len;
+
+  // Interface protocol (hid_interface_protocol_enum_t)
+  const char* protocol_str[] = { "None", "Keyboard", "Mouse" };
+  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
+
   uint16_t vid, pid;
   tuh_vid_pid_get(dev_addr, &vid, &pid);
 
-  printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance);
-  printf("VID = %04x, PID = %04x\r\n", vid, pid);
+  char tempbuf[256];
+  int count = sprintf(tempbuf, "[%04x:%04x][%u] HID Interface%u, Protocol = %s\r\n", vid, pid, dev_addr, instance, protocol_str[itf_protocol]);
 
-  // Receive any report and treat it like a keyboard.
+  tud_cdc_write(tempbuf, (uint32_t) count);
+  tud_cdc_write_flush();
+
+  // Receive report from boot keyboard & mouse only
   // tuh_hid_report_received_cb() will be invoked when report is available
-  if ( !tuh_hid_receive_report(dev_addr, instance) )
+  if (itf_protocol == HID_ITF_PROTOCOL_KEYBOARD || itf_protocol == HID_ITF_PROTOCOL_MOUSE)
   {
-    printf("Error: cannot request to receive report\r\n");
+    if ( !tuh_hid_receive_report(dev_addr, instance) )
+    {
+      tud_cdc_write_str("Error: cannot request report\r\n");
+    }
   }
 }
 
 // Invoked when device with hid interface is un-mounted
 void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance)
 {
-  printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance);
+  char tempbuf[256];
+  int count = sprintf(tempbuf, "[%u] HID Interface%u is unmounted\r\n", dev_addr, instance);
+  tud_cdc_write(tempbuf, (uint32_t) count);
+  tud_cdc_write_flush();
 }
 
-// keycodes from last report to check if key is holding or newly pressed
-uint8_t last_keycodes[6] = {0};
-
 // look up new key in previous keys
-static inline bool key_in_last_report(const uint8_t key_arr[6], uint8_t keycode)
+static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode)
 {
   for(uint8_t i=0; i<6; i++)
   {
-    if (key_arr[i] == keycode) return true;
+    if (report->keycode[i] == keycode)  return true;
   }
 
   return false;
 }
 
-// Invoked when received report from device via interrupt endpoint
-void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len)
-{
-  if (len != 8)
-  {
-    char ch_num;
-
-    tud_cdc_write_str("incorrect report len: ");
-
-    if ( len > 10 )
-    {
-      ch_num = '0' + (len / 10);
-      tud_cdc_write(&ch_num, 1);
-      len = len % 10;
-    }
-
-    ch_num = '0' + len;
-    tud_cdc_write(&ch_num, 1);
-
-    tud_cdc_write_str("\r\n");
-    tud_cdc_write_flush();
-
-    // Don't request a new report for a wrong sized endpoint.
-    return;
-  }
 
-  uint8_t const modifiers = report[0];
+// convert hid keycode to ascii and print via usb device CDC (ignore non-printable)
+static void process_kbd_report(uint8_t dev_addr, hid_keyboard_report_t const *report)
+{
+  (void) dev_addr;
+  static hid_keyboard_report_t prev_report = { 0, 0, {0} }; // previous report to check key released
   bool flush = false;
 
-  for (int i = 2; i < 8; i++)
+  for(uint8_t i=0; i<6; i++)
   {
-    uint8_t keycode = report[i];
-
-    if (keycode)
+    uint8_t keycode = report->keycode[i];
+    if ( keycode )
     {
-      if ( key_in_last_report(last_keycodes, keycode) )
+      if ( find_key_in_report(&prev_report, keycode) )
       {
         // exist in previous report means the current key is holding
-        // do nothing
       }else
       {
         // not existed in previous report means the current key is pressed
-        // Only print keycodes 0 - 128.
-        if (keycode < 128)
-        {
-          // remap the key code for Colemak layout so @tannewt can type.
-          #ifdef KEYBOARD_COLEMAK
-          uint8_t colemak_key_code = colemak[keycode];
-          if (colemak_key_code != 0) keycode = colemak_key_code;
-          #endif
 
-          bool const is_shift = modifiers & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT);
-          char c = keycode2ascii[keycode][is_shift ? 1 : 0];
-          if (c)
-          {
-            if (c == '\n') tud_cdc_write("\r", 1);
-            tud_cdc_write(&c, 1);
-            flush = true;
-          }
+        // remap the key code for Colemak layout
+        #ifdef KEYBOARD_COLEMAK
+        uint8_t colemak_key_code = colemak[keycode];
+        if (colemak_key_code != 0) keycode = colemak_key_code;
+        #endif
+
+        bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT);
+        uint8_t ch = keycode2ascii[keycode][is_shift ? 1 : 0];
+
+        if (ch)
+        {
+          if (ch == '\n') tud_cdc_write("\r", 1);
+          tud_cdc_write(&ch, 1);
+          flush = true;
         }
       }
     }
+    // TODO example skips key released
   }
 
   if (flush) tud_cdc_write_flush();
 
-  // save current report
-  memcpy(last_keycodes, report+2, 6);
-
-  // continue to request to receive report
-  if ( !tuh_hid_receive_report(dev_addr, instance) )
-  {
-    printf("Error: cannot request to receive report\r\n");
-  }
+  prev_report = *report;
 }
 
-
-
-//--------------------------------------------------------------------+
-// USB CDC
-//--------------------------------------------------------------------+
-void cdc_task(void)
+// send mouse report to usb device CDC
+static void process_mouse_report(uint8_t dev_addr, hid_mouse_report_t const * report)
 {
-  // connected() check for DTR bit
-  // Most but not all terminal client set this when making connection
-  // if ( tud_cdc_connected() )
-  {
-    // connected and there are data available
-    if ( tud_cdc_available() )
-    {
-      // read datas
-      char buf[64];
-      uint32_t count = tud_cdc_read(buf, sizeof(buf));
-      (void) count;
+  //------------- button state  -------------//
+  //uint8_t button_changed_mask = report->buttons ^ prev_report.buttons;
+  char l = report->buttons & MOUSE_BUTTON_LEFT   ? 'L' : '-';
+  char m = report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-';
+  char r = report->buttons & MOUSE_BUTTON_RIGHT  ? 'R' : '-';
 
-      // Echo back
-      // Note: Skip echo by commenting out write() and write_flush()
-      // for throughput test e.g
-      //    $ dd if=/dev/zero of=/dev/ttyACM0 count=10000
-      tud_cdc_write(buf, count);
-      tud_cdc_write_flush();
-    }
-  }
+  char tempbuf[32];
+  int count = sprintf(tempbuf, "[%u] %c%c%c %d %d %d\r\n", dev_addr, l, m, r, report->x, report->y, report->wheel);
+
+  tud_cdc_write(tempbuf, (uint32_t) count);
+  tud_cdc_write_flush();
 }
 
-// Invoked when cdc when line state changed e.g connected/disconnected
-void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
+// Invoked when received report from device via interrupt endpoint
+void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len)
 {
-  (void) itf;
-  (void) rts;
+  (void) len;
+  uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance);
 
-  // TODO set some indicator
-  if ( dtr )
+  switch(itf_protocol)
   {
-    // Terminal connected
-  }else
-  {
-    // Terminal disconnected
+    case HID_ITF_PROTOCOL_KEYBOARD:
+      process_kbd_report(dev_addr, (hid_keyboard_report_t const*) report );
+    break;
+
+    case HID_ITF_PROTOCOL_MOUSE:
+      process_mouse_report(dev_addr, (hid_mouse_report_t const*) report );
+    break;
+
+    default: break;
   }
-}
 
-// Invoked when CDC interface received data from host
-void tud_cdc_rx_cb(uint8_t itf)
-{
-  (void) itf;
+  // continue to request to receive report
+  if ( !tuh_hid_receive_report(dev_addr, instance) )
+  {
+    tud_cdc_write_str("Error: cannot request report\r\n");
+  }
 }
 
 //--------------------------------------------------------------------+
-// BLINKING TASK
+// Blinking Task
 //--------------------------------------------------------------------+
 void led_blinking_task(void)
 {
diff --git a/examples/host/hid_to_cdc/src/tusb_config.h b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h
index 9a35ffc30..f749bd712 100644
--- a/examples/host/hid_to_cdc/src/tusb_config.h
+++ b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h
@@ -30,72 +30,61 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_TUD_RHPORT
+#define BOARD_TUD_RHPORT      0
 #endif
 
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_DEVICE_RHPORT_NUM
-  #define BOARD_DEVICE_RHPORT_NUM     0
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUD_MAX_SPEED
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// RHPort number used for device can be defined by board.mk, default to port 1
-#ifndef BOARD_HOST_RHPORT_NUM
-  #define BOARD_HOST_RHPORT_NUM     1
+// RHPort number used for host can be defined by board.mk, default to port 1
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      1
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
-#ifndef BOARD_HOST_RHPORT_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_HOST_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_HOST_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_DEVICE_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#elif BOARD_DEVICE_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_HOST_RHPORT_NUM == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_HOST | BOARD_HOST_RHPORT_SPEED)
-#elif BOARD_HOST_RHPORT_NUM == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_HOST | BOARD_HOST_RHPORT_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
 #endif
 
-// This example doesn't use an RTOS
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+// Enable Device stack, Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_ENABLED       1
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+// Enable Host stack, Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_ENABLED       1
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+// Use pico-pio-usb as host controller for raspberry rp2040
+#define CFG_TUH_RPI_PIO_USB   1
 #endif
 
+
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0
 
@@ -111,7 +100,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------
@@ -124,10 +113,6 @@
 
 //------------- CLASS -------------//
 #define CFG_TUD_CDC              1
-#define CFG_TUD_MSC              0
-#define CFG_TUD_HID              0
-#define CFG_TUD_MIDI             0
-#define CFG_TUD_VENDOR           0
 
 // CDC FIFO size of TX and RX
 #define CFG_TUD_CDC_RX_BUFSIZE   (TUD_OPT_HIGH_SPEED ? 512 : 64)
@@ -144,14 +129,9 @@
 #define CFG_TUH_ENUMERATION_BUFSIZE 256
 
 #define CFG_TUH_HUB                 1
-#define CFG_TUH_CDC                 0
-#define CFG_TUH_MSC                 0
-#define CFG_TUH_VENDOR              0
-
 // max device support (excluding hub device)
 #define CFG_TUH_DEVICE_MAX          (CFG_TUH_HUB ? 4 : 1) // hub typically has 4 ports
 
-//------------- HID -------------//
 #define CFG_TUH_HID                  4
 #define CFG_TUH_HID_EPIN_BUFSIZE    64
 #define CFG_TUH_HID_EPOUT_BUFSIZE   64
diff --git a/examples/host/hid_to_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c
index 7dd73937c..6b0a89127 100644
--- a/examples/host/hid_to_cdc/src/usb_descriptors.c
+++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c
@@ -81,7 +81,6 @@ enum
 {
   ITF_NUM_CDC = 0,
   ITF_NUM_CDC_DATA,
-  ITF_NUM_MSC,
   ITF_NUM_TOTAL
 };
 
@@ -260,7 +259,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
 
   return _desc_str;
 }
diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt
index bff281a8c..bc04b01a7 100644
--- a/examples/host/bare_api/CMakeLists.txt
+++ b/examples/host/bare_api/CMakeLists.txt
@@ -24,4 +24,7 @@ target_include_directories(${PROJECT} PUBLIC
 
 # Configure compilation flags and libraries for the example... see the corresponding function
 # in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
\ No newline at end of file
+family_configure_host_example(${PROJECT})
+
+# For rp2040, un-comment to enable pico-pio-usb
+# family_add_pico_pio_usb(${PROJECT})
\ No newline at end of file
diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt
index 7fe4e3f5c..fa9c14857 100644
--- a/examples/host/bare_api/only.txt
+++ b/examples/host/bare_api/only.txt
@@ -3,7 +3,9 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
+mcu:MIMXRT
 mcu:MIMXRT10XX
+mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c
index eb3f7d8d7..51cab2de0 100644
--- a/examples/host/bare_api/src/main.c
+++ b/examples/host/bare_api/src/main.c
@@ -62,8 +62,10 @@ int main(void)
 {
   board_init();
 
-  printf("TinyUSB Host HID Controller Example\r\n");
-  tusb_init();
+  printf("TinyUSB Bare API Example\r\n");
+
+  // init host stack on configured roothub port
+  tuh_init(BOARD_TUH_RHPORT);
 
   while (1)
   {
@@ -82,8 +84,8 @@ void tuh_mount_cb (uint8_t daddr)
 {
   printf("Device attached, address = %d\r\n", daddr);
 
-  // Get Device Descriptor sync API
-  // TODO: invoking control trannsfer now has issue with mounting hub with multiple devices attached, fix later
+  // Get Device Descriptor
+  // TODO: invoking control transfer now has issue with mounting hub with multiple devices attached, fix later
   tuh_descriptor_get_device(daddr, &desc_device, 18, print_device_descriptor, 0);
 }
 
@@ -187,7 +189,7 @@ void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const*
     if( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) ) return;
     tusb_desc_interface_t const* desc_itf = (tusb_desc_interface_t const*) p_desc;
 
-    uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, desc_end-p_desc);
+    uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end-p_desc));
 
     // probably corrupted descriptor
     if(drv_len < sizeof(tusb_desc_interface_t)) return;
@@ -242,7 +244,8 @@ void hid_report_received(tuh_xfer_t* xfer);
 void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len)
 {
   // len = interface + hid + n*endpoints
-  uint16_t const drv_len = sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + desc_itf->bNumEndpoints*sizeof(tusb_desc_endpoint_t);
+  uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) +
+                                       desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t));
 
   // corrupted descriptor
   if (max_len < drv_len) return;
@@ -375,7 +378,7 @@ static void _convert_utf16le_to_utf8(const uint16_t *utf16, size_t utf16_len, ui
     for (size_t i = 0; i < utf16_len; i++) {
         uint16_t chr = utf16[i];
         if (chr < 0x80) {
-            *utf8++ = chr & 0xff;
+            *utf8++ = chr & 0xffu;
         } else if (chr < 0x800) {
             *utf8++ = (uint8_t)(0xC0 | (chr >> 6 & 0x1F));
             *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F));
@@ -403,12 +406,12 @@ static int _count_utf8_bytes(const uint16_t *buf, size_t len) {
         }
         // TODO: Handle UTF-16 code points that take two entries.
     }
-    return total_bytes;
+    return (int) total_bytes;
 }
 
 static void print_utf16(uint16_t *temp_buf, size_t buf_len) {
     size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t);
-    size_t utf8_len = _count_utf8_bytes(temp_buf + 1, utf16_len);
+    size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len);
     _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len);
     ((uint8_t*) temp_buf)[utf8_len] = '\0';
 
diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h
index 9b789290d..ed0aaf7da 100644
--- a/examples/host/bare_api/src/tusb_config.h
+++ b/examples/host/bare_api/src/tusb_config.h
@@ -30,27 +30,42 @@
  extern "C" {
 #endif
 
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
 //--------------------------------------------------------------------
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
 #ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
+#error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-  #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
-#else
-  #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_HOST
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt
index 0a99bc3a9..c4a4d8e63 100644
--- a/examples/host/cdc_msc_hid/CMakeLists.txt
+++ b/examples/host/cdc_msc_hid/CMakeLists.txt
@@ -26,4 +26,7 @@ target_include_directories(${PROJECT} PUBLIC
 
 # Configure compilation flags and libraries for the example... see the corresponding function
 # in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
\ No newline at end of file
+family_configure_host_example(${PROJECT})
+
+# For rp2040, un-comment to enable pico-pio-usb
+# family_add_pico_pio_usb(${PROJECT})
diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt
index 7fe4e3f5c..fa9c14857 100644
--- a/examples/host/cdc_msc_hid/only.txt
+++ b/examples/host/cdc_msc_hid/only.txt
@@ -3,7 +3,9 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
+mcu:MIMXRT
 mcu:MIMXRT10XX
+mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c
index 0fc7ef146..664cbf035 100644
--- a/examples/host/cdc_msc_hid/src/main.c
+++ b/examples/host/cdc_msc_hid/src/main.c
@@ -45,7 +45,8 @@ int main(void)
 
   printf("TinyUSB Host CDC MSC HID Example\r\n");
 
-  tusb_init();
+  // init host stack on configured roothub port
+  tuh_init(BOARD_TUH_RHPORT);
 
   while (1)
   {
diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h
index bc6c68e5b..33f34315b 100644
--- a/examples/host/cdc_msc_hid/src/tusb_config.h
+++ b/examples/host/cdc_msc_hid/src/tusb_config.h
@@ -30,27 +30,42 @@
  extern "C" {
 #endif
 
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
 //--------------------------------------------------------------------
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
 #ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
+#error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-  #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
-#else
-  #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_HOST
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -74,7 +89,7 @@
 // Size of buffer to hold descriptors and other data used for enumeration
 #define CFG_TUH_ENUMERATION_BUFSIZE 256
 
-#define CFG_TUH_HUB                 1
+#define CFG_TUH_HUB                 1 // number of supported hubs
 #define CFG_TUH_CDC                 1
 #define CFG_TUH_HID                 4 // typical keyboard + mouse device can have 3-4 HID interfaces
 #define CFG_TUH_MSC                 1
diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt
index aaf8bc34f..6153d399a 100644
--- a/examples/host/hid_controller/CMakeLists.txt
+++ b/examples/host/hid_controller/CMakeLists.txt
@@ -25,4 +25,7 @@ target_include_directories(${PROJECT} PUBLIC
 
 # Configure compilation flags and libraries for the example... see the corresponding function
 # in hw/bsp/FAMILY/family.cmake for details.
-family_configure_host_example(${PROJECT})
\ No newline at end of file
+family_configure_host_example(${PROJECT})
+
+# For rp2040, un-comment to enable pico-pio-usb
+# family_add_pico_pio_usb(${PROJECT})
diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt
index 7fe4e3f5c..fa9c14857 100644
--- a/examples/host/hid_controller/only.txt
+++ b/examples/host/hid_controller/only.txt
@@ -3,7 +3,9 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
+mcu:MIMXRT
 mcu:MIMXRT10XX
+mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c
index b9b37a4d2..299a3ff10 100644
--- a/examples/host/hid_controller/src/main.c
+++ b/examples/host/hid_controller/src/main.c
@@ -49,9 +49,10 @@ int main(void)
   board_init();
 
   printf("TinyUSB Host HID Controller Example\r\n");
-  printf("Note: Events only displayed for explictly supported controllers\r\n");
+  printf("Note: Events only displayed for explicit supported controllers\r\n");
 
-  tusb_init();
+  // init host stack on configured roothub port
+  tuh_init(BOARD_TUH_RHPORT);
 
   while (1)
   {
diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h
index 74b471ae4..475b9ca8f 100644
--- a/examples/host/hid_controller/src/tusb_config.h
+++ b/examples/host/hid_controller/src/tusb_config.h
@@ -30,27 +30,42 @@
  extern "C" {
 #endif
 
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
+
+// RHPort number used for host can be defined by board.mk, default to port 0
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+#ifndef BOARD_TUH_MAX_SPEED
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
 //--------------------------------------------------------------------
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
 // defined by compiler flags for flexibility
 #ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
+#error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-  #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
-#else
-  #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_HOST
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS           OPT_OS_NONE
 #endif
 
-#ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS                 OPT_OS_NONE
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
 #endif
 
-// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
-// #define CFG_TUSB_DEBUG           0
+// Enable Host stack
+#define CFG_TUH_ENABLED       1
+
+// Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
 
 /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
  * Tinyusb use follows macros to declare transferring memory so that they can be put
diff --git a/examples/make.mk b/examples/make.mk
index bed46d02b..47520d660 100644
--- a/examples/make.mk
+++ b/examples/make.mk
@@ -45,11 +45,6 @@ else
   SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c))
 endif
 
-# Fetch submodules depended by family
-fetch_submodule_if_empty = $(if $(wildcard $(TOP)/$1/*),,$(info $(shell git -C $(TOP) submodule update --init $1)))
-ifdef DEPS_SUBMODULES
-  $(foreach s,$(DEPS_SUBMODULES),$(call fetch_submodule_if_empty,$(s)))
-endif
 
 #-------------- Cross Compiler  ------------
 # Can be set by board, default to ARM GCC
@@ -90,13 +85,13 @@ CFLAGS += \
   -ffunction-sections \
   -fsingle-precision-constant \
   -fno-strict-aliasing \
-  -Wdouble-promotion \
-  -Wstrict-prototypes \
-  -Wstrict-overflow \
   -Wall \
   -Wextra \
   -Werror \
   -Wfatal-errors \
+  -Wdouble-promotion \
+  -Wstrict-prototypes \
+  -Wstrict-overflow \
   -Werror-implicit-function-declaration \
   -Wfloat-equal \
   -Wundef \
@@ -108,8 +103,14 @@ CFLAGS += \
   -Wcast-align \
   -Wcast-function-type \
   -Wcast-qual \
-  -Wnull-dereference
+  -Wnull-dereference \
+  -Wuninitialized \
+  -Wunused \
+  -Wredundant-decls
 
+# conversion is too strict for most mcu driver, may be disable sign/int/arith-conversion
+#  -Wconversion
+  
 # Debugging/Optimization
 ifeq ($(DEBUG), 1)
   CFLAGS += -Og
diff --git a/examples/rules.mk b/examples/rules.mk
index 97f6956fa..c3134056a 100644
--- a/examples/rules.mk
+++ b/examples/rules.mk
@@ -5,6 +5,7 @@
 # Set all as default goal
 .DEFAULT_GOAL := all
 
+# ---------------- GNU Make Start -----------------------
 # ESP32-Sx and RP2040 has its own CMake build system
 ifeq (,$(findstring $(FAMILY),esp32s2 esp32s3 rp2040))
 
@@ -141,7 +142,23 @@ $(BUILD)/obj/%_asm.o: %.S
 	@echo AS $(notdir $@)
 	@$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $<
 
-endif # GNU Make
+endif
+
+.PHONY: clean
+clean:
+ifeq ($(CMDEXE),1)
+	rd /S /Q $(subst /,\,$(BUILD))
+else
+	$(RM) -rf $(BUILD)
+endif
+# ---------------- GNU Make End -----------------------
+
+# get depenecies
+.PHONY: get-deps
+get-deps:
+  ifdef DEPS_SUBMODULES
+	git -C $(TOP) submodule update --init $(DEPS_SUBMODULES)
+  endif
 
 size: $(BUILD)/$(PROJECT).elf
 	-@echo ''
@@ -152,14 +169,6 @@ size: $(BUILD)/$(PROJECT).elf
 linkermap: $(BUILD)/$(PROJECT).elf
 	@linkermap -v $<.map
 
-.PHONY: clean
-clean:
-ifeq ($(CMDEXE),1)
-	rd /S /Q $(subst /,\,$(BUILD))
-else
-	$(RM) -rf $(BUILD)
-endif
-
 # ---------------------------------------
 # Flash Targets
 # ---------------------------------------
@@ -199,7 +208,7 @@ flash-xfel: $(BUILD)/$(PROJECT)-sunxi.bin
 PYOCD_OPTION ?=
 flash-pyocd: $(BUILD)/$(PROJECT).hex
 	pyocd flash -t $(PYOCD_TARGET) $(PYOCD_OPTION) $<
-	pyocd reset -t $(PYOCD_TARGET)
+	#pyocd reset -t $(PYOCD_TARGET)
 
 # Flash using openocd
 OPENOCD_OPTION ?=