Merge pull request #1392 from tannewt/host_string_example

Add host example that prints out info of connected devices

5 files changed, 354 insertions, 0 deletions

diff --git a/examples/host/device_info/CMakeLists.txt b/examples/host/device_info/CMakeLists.txt
new file mode 100644
index 000000000..bff281a8c
--- /dev/null
+++ b/examples/host/device_info/CMakeLists.txt
@@ -0,0 +1,27 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT})
\ No newline at end of file
diff --git a/examples/host/device_info/Makefile b/examples/host/device_info/Makefile
new file mode 100644
index 000000000..c59369ffa
--- /dev/null
+++ b/examples/host/device_info/Makefile
@@ -0,0 +1,28 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += \
+	src/main.c
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+# TODO: suppress warning caused by host stack
+CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference
+
+# TinyUSB Host Stack source
+SRC_C += \
+	src/class/cdc/cdc_host.c \
+	src/class/hid/hid_host.c \
+	src/class/msc/msc_host.c \
+	src/host/hub.c \
+	src/host/usbh.c \
+	src/host/usbh_control.c \
+	src/portable/ohci/ohci.c \
+	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
+
+include ../../rules.mk
diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt
new file mode 100644
index 000000000..7fe4e3f5c
--- /dev/null
+++ b/examples/host/device_info/only.txt
@@ -0,0 +1,9 @@
+mcu:LPC175X_6X
+mcu:LPC177X_8X
+mcu:LPC18XX
+mcu:LPC40XX
+mcu:LPC43XX
+mcu:MIMXRT10XX
+mcu:RP2040
+mcu:MSP432E4
+mcu:RX65X
diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c
new file mode 100644
index 000000000..e6149db89
--- /dev/null
+++ b/examples/host/device_info/src/main.c
@@ -0,0 +1,194 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* This example prints out info about the enumerated devices. */
+
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+void led_blinking_task(void);
+
+static xfer_result_t _get_string_result;
+
+static bool _transfer_done_cb(uint8_t daddr, tusb_control_request_t const *request, xfer_result_t result) {
+    (void)daddr;
+    (void)request;
+    _get_string_result = result;
+    return true;
+}
+
+static void _convert_utf16le_to_utf8(const uint16_t *utf16, size_t utf16_len, uint8_t *utf8, size_t utf8_len) {
+    // TODO: Check for runover.
+    (void)utf8_len;
+    // Get the UTF-16 length out of the data itself.
+
+    for (size_t i = 0; i < utf16_len; i++) {
+        uint16_t chr = utf16[i];
+        if (chr < 0x80) {
+            *utf8++ = chr & 0xff;
+        } else if (chr < 0x800) {
+            *utf8++ = (uint8_t)(0xC0 | (chr >> 6 & 0x1F));
+            *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F));
+        } else {
+            // TODO: Verify surrogate.
+            *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F));
+            *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F));
+            *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F));
+        }
+        // TODO: Handle UTF-16 code points that take two entries.
+    }
+}
+
+// Count how many bytes a utf-16-le encoded string will take in utf-8.
+static int _count_utf8_bytes(const uint16_t *buf, size_t len) {
+    size_t total_bytes = 0;
+    for (size_t i = 0; i < len; i++) {
+        uint16_t chr = buf[i];
+        if (chr < 0x80) {
+            total_bytes += 1;
+        } else if (chr < 0x800) {
+            total_bytes += 2;
+        } else {
+            total_bytes += 3;
+        }
+        // TODO: Handle UTF-16 code points that take two entries.
+    }
+    return total_bytes;
+}
+
+static void _wait_and_convert(uint16_t *temp_buf, size_t buf_len) {
+    while (_get_string_result == 0xff) {
+        tuh_task();
+    }
+    if (_get_string_result != XFER_RESULT_SUCCESS) {
+        temp_buf[0] = 0;
+        return;
+    }
+    size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t);
+    size_t utf8_len = _count_utf8_bytes(temp_buf + 1, utf16_len);
+    _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len);
+    ((uint8_t*) temp_buf)[utf8_len] = '\0';
+}
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  printf("TinyUSB Host Device Info Example\r\n");
+
+  tusb_init();
+
+  uint32_t interval_ms = 5000;
+  uint32_t start_time = 0;
+
+  while (1)
+  {
+    // tinyusb host task
+    tuh_task();
+    led_blinking_task();
+
+    if (board_millis() - start_time < interval_ms) {
+      continue;
+    }
+    start_time = board_millis();
+    // Brute force check every device address to see if it is active.
+    for (int i = 1; i < CFG_TUH_DEVICE_MAX + CFG_TUH_HUB + 1; i++) {
+      if (!tuh_ready(i)) {
+        continue;
+      }
+      uint16_t vid;
+      uint16_t pid;
+      tuh_vid_pid_get(i, &vid, &pid);
+      printf("%d vid %04x pid %04x\r\n", i, vid, pid);
+
+      tusb_speed_t speed = tuh_speed_get(i);
+      switch (speed) {
+        case TUSB_SPEED_FULL:
+          printf("Full speed\r\n");
+          break;
+        case TUSB_SPEED_LOW:
+          printf("Low speed\r\n");
+          break;
+        case TUSB_SPEED_HIGH:
+          printf("High speed\r\n");
+          break;
+        default:
+          break;
+      }
+
+      _get_string_result = 0xff;
+      uint16_t temp_buf[127];
+      if (tuh_descriptor_string_serial_get(i, 0, temp_buf, TU_ARRAY_SIZE(temp_buf), _transfer_done_cb)) {
+        _wait_and_convert(temp_buf, TU_ARRAY_SIZE(temp_buf));
+        printf("Serial: %s\r\n", (const char*) temp_buf);
+      }
+
+      _get_string_result = 0xff;
+      temp_buf[0] = 0;
+      if (tuh_descriptor_string_product_get(i, 0, temp_buf, TU_ARRAY_SIZE(temp_buf), _transfer_done_cb)) {
+        _wait_and_convert(temp_buf, TU_ARRAY_SIZE(temp_buf));
+        printf("Product: %s\r\n", (const char*) temp_buf);
+      }
+
+      _get_string_result = 0xff;
+      temp_buf[0] = 0;
+      if (tuh_descriptor_string_manufacturer_get(i, 0, temp_buf, TU_ARRAY_SIZE(temp_buf), _transfer_done_cb)) {
+        _wait_and_convert(temp_buf, TU_ARRAY_SIZE(temp_buf));
+        printf("Manufacturer: %s\r\n", (const char*) temp_buf);
+      }
+    }
+    printf("\n");
+  }
+
+  return 0;
+}
+
+
+//--------------------------------------------------------------------+
+// Blinking Task
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  const uint32_t interval_ms = 1000;
+  static uint32_t start_ms = 0;
+
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h
new file mode 100644
index 000000000..6b413e46f
--- /dev/null
+++ b/examples/host/device_info/src/tusb_config.h
@@ -0,0 +1,96 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+  #error CFG_TUSB_MCU must be defined
+#endif
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+  #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
+#else
+  #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_HOST
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS                 OPT_OS_NONE
+#endif
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// CONFIGURATION
+//--------------------------------------------------------------------
+
+// Size of buffer to hold descriptors and other data used for enumeration
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+
+// only hub class is enabled
+#define CFG_TUH_HUB                 1
+
+// max device support (excluding hub device)
+// 1 hub typically has 4 ports
+#define CFG_TUH_DEVICE_MAX          (CFG_TUH_HUB ? 4 : 1)
+
+#define CFG_TUH_ENDPOINT_MAX       8
+
+#define CFG_TUH_TASK_QUEUE_SZ       64
+
+//------------- HID -------------//
+
+#define CFG_TUH_HID_EP_BUFSIZE      64
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */